path: root/MIBS/cisco/CISCO-VLAN-MEMBERSHIP-MIB

-- *****************************************************************
-- CISCO-VLAN-MEMBERSHIP-MIB
--   
-- November 1998, Chin-Chai Low
--   
-- Copyright (c) 1998-2004, 2007 by Cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-VLAN-MEMBERSHIP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
    Counter32,
    Integer32,
    IpAddress
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    RowStatus,
    TruthValue
        FROM SNMPv2-TC
    ifIndex
        FROM IF-MIB
    VlanIndex
        FROM CISCO-VTP-MIB
    CiscoPortList,
    CiscoPortListRange
        FROM CISCO-TC
    ciscoMgmt
        FROM CISCO-SMI;


ciscoVlanMembershipMIB MODULE-IDENTITY
    LAST-UPDATED    "200712140000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            E-mail: cs-vlans@cisco.com"
    DESCRIPTION
        "The MIB module for the management of the VLAN
        Membership within the frame  work of Cisco
        VLAN Architecture, v 2.0 by Keith McCloghrie. The MIB
        provides information on VLAN Membership Policy Servers
        used by a device and VLAN membership assignments of
        non-trunk bridge ports of the device."
    REVISION        "200712140000Z"
    DESCRIPTION
        "Add vmVlanCreationGroup."
    REVISION        "200407160000Z"
    DESCRIPTION
        "Add vmMembershipSummaryExtTable."
    REVISION        "200404070000Z"
    DESCRIPTION
        "Change the SYNTAX of vmMembershipSummaryMember2kPorts
        from PortList to CiscoPortList."
    REVISION        "200310100000Z"
    DESCRIPTION
        "Add vmVoiceVlanCdpVerifyEnable to support the feature
        of voice VLANs' detection through CDP packets."
    REVISION        "200306050000Z"
    DESCRIPTION
        "Deprecate vmMembershipSummaryMemberPorts and define
        vmMembershipSummaryMember2kPorts to support up to 2k 
        bridge ports."
    REVISION        "200203280000Z"
    DESCRIPTION
        "Add vmVoiceVlanTable to support VVID feature"
    REVISION        "200105010000Z"
    DESCRIPTION
        "Import VlanIndex from CISCO-VTP-MIB"
    REVISION        "200101300000Z"
    DESCRIPTION
        "Corrected description of vmVmpsReconfirmResult"
    REVISION        "200001060000Z"
    DESCRIPTION
        "Added 4k VLAN support"
    REVISION        "9901180000Z"
    DESCRIPTION
        "Add vmNotificationsEnabled.
        Add support for multi-vlan ports.
                    Other minor edits."
    REVISION        "9612060000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoMgmt 68 }


ciscoVlanMembershipMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoVlanMembershipMIB 1 }

-- Textual Conventions

vmVmps  OBJECT IDENTIFIER
    ::= { ciscoVlanMembershipMIBObjects 1 }

vmMembership  OBJECT IDENTIFIER
    ::= { ciscoVlanMembershipMIBObjects 2 }

vmStatistics  OBJECT IDENTIFIER
    ::= { ciscoVlanMembershipMIBObjects 3 }

vmStatus  OBJECT IDENTIFIER
    ::= { ciscoVlanMembershipMIBObjects 4 }

vmVoiceVlan  OBJECT IDENTIFIER
    ::= { ciscoVlanMembershipMIBObjects 5 }


-- General Info

vmVmpsVQPVersion OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The VLAN Query Protocol (VQP) version supported on
        the device. VQP is the protocol used to query
        VLAN Membership Policy Server (VMPS) for VLAN
        membership assignments of dynamic VLAN ports.
        A VMPS provides VLAN membership policy
        assignments based on the content of the packets
        received on a port." 
    ::= { vmVmps 1 }

vmVmpsRetries OBJECT-TYPE
    SYNTAX          INTEGER (1..10)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The number of retries for VQP requests to a VMPS before
        using the next available VMPS." 
    ::= { vmVmps 2 }

vmVmpsReconfirmInterval OBJECT-TYPE
    SYNTAX          INTEGER (0..120)
    UNITS           "Minutes"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The switch will reconfirm membership of addresses on
        each port with VMPS periodically. This object specifies
        the interval to perform reconfirmation. If the value is
        set to 0, the switch does not reconfirm membership with
        VMPS."
    DEFVAL          { 60 } 
    ::= { vmVmps 3 }

vmVmpsReconfirm OBJECT-TYPE
    SYNTAX          INTEGER  {
                        ready(1),
                        execute(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Setting this object to execute(2) causes the switch
        to reconfirm membership of every dynamic port.
        Reading this object always return ready(1)." 
    ::= { vmVmps 4 }

vmVmpsReconfirmResult OBJECT-TYPE
    SYNTAX          INTEGER  {
                        other(1),
                        inProgress(2),
                        success(3),
                        noResponse(4),
                        noVmps(5),
                        noDynamicPort(6),
                        noHostConnected(7)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object returns the result of the last request
        that sets vmVmpsReconfirm to execute(2). The
        semantics of the possible results are as follows:

             other(1)           - none of following
             inProgress(2)      - reconfirm in progress
             success(3)         - reconfirm completed successfully
             noResponse(4)      - reconfirm failed because no
                                  VMPS responded
             noVmps(5)          - No VMPS configured
             noDynamicPort(6)   - No dynamic ports configured
             noHostConnected(7) - No hosts on dynamic ports" 
    ::= { vmVmps 5 }

vmVmpsCurrent OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This is the IpAddress of the current VMPS used." 
    ::= { vmVmps 6 }

vmVmpsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VmVmpsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A table of VMPS to use. The device will use
        the the primary VMPS by default. If the
        device is unable to reach the primary server
        after vmVmpsRetries retries, it uses the first
        secondary server in the table until it runs out
        of secondary servers, in which case it will return
        to using the primary server. Entries in this table
        may be created and deleted via this MIB or
        the management console on a device."
    ::= { vmVmps 7 }

vmVmpsEntry OBJECT-TYPE
    SYNTAX          VmVmpsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry (conceptual row) in the vmVmpsTable."
    INDEX           { vmVmpsIpAddress } 
    ::= { vmVmpsTable 1 }

VmVmpsEntry ::= SEQUENCE {
        vmVmpsIpAddress IpAddress,
        vmVmpsPrimary   TruthValue,
        vmVmpsRowStatus RowStatus
}

vmVmpsIpAddress OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The Ip Address of the VMPS." 
    ::= { vmVmpsEntry 1 }

vmVmpsPrimary OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The status of the VMPS. Setting this value
        to true will make this VMPS the primary server
        and make the switch use this as the current server.
        Setting this entry to true causes other rows
        to transition to false. Attempting to write
        a value of false after creation will result in
        a return of bad value. Deleting an entry whose
        value is true will result in the first entry
        in the table being set to true." 
    ::= { vmVmpsEntry 2 }

vmVmpsRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The status of this conceptual row." 
    ::= { vmVmpsEntry 3 }
 

-- VLAN Membership Info

vmMembershipSummaryTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VmMembershipSummaryEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A summary of VLAN membership of non-trunk
        bridge ports. This is a convenience table
        for retrieving VLAN membership information.

        A row is created for a VLAN if:
        a) the VLAN exists, or
        b) a port is assigned to a non-existent VLAN.

        VLAN membership can only be modified via the
        vmMembershipTable."
    ::= { vmMembership 1 }

vmMembershipSummaryEntry OBJECT-TYPE
    SYNTAX          VmMembershipSummaryEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry (conceptual row) in the
        vmMembershipSummaryTable."
    INDEX           { vmMembershipSummaryVlanIndex } 
    ::= { vmMembershipSummaryTable 1 }

VmMembershipSummaryEntry ::= SEQUENCE {
        vmMembershipSummaryVlanIndex     VlanIndex,
        vmMembershipSummaryMemberPorts   OCTET STRING,
        vmMembershipSummaryMember2kPorts CiscoPortList
}

vmMembershipSummaryVlanIndex OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The VLAN id of the VLAN." 
    ::= { vmMembershipSummaryEntry 1 }

vmMembershipSummaryMemberPorts OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-only
    STATUS          deprecated
    DESCRIPTION
        "The set of the device's member ports that belong
        to the VLAN.

        Each octet within the value of this object specifies a
        set of eight ports, with the first octet specifying ports
        1 through 8, the second octet specifying ports 9
        through 16, etc.   Within each octet, the most
        significant bit represents the lowest numbered
        port, and the least significant bit represents the
        highest numbered port.  Thus, each port of the
        VLAN is represented by a single bit within the
        value of this object.  If that bit has a value of
        '1' then that port is included in the set of
        ports; the port is not included if its bit has a
        value of '0'.

        A port number is the value of dot1dBasePort for
        the port in the BRIDGE-MIB (RFC 1493)." 
    ::= { vmMembershipSummaryEntry 2 }

vmMembershipSummaryMember2kPorts OBJECT-TYPE
    SYNTAX          CiscoPortList
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The set of the device's member ports that belong
        to the VLAN. It has the VLAN membership information
        of up to 2048 ports with the port number from 1 to 
        2048.

        Each octet within the value of this object specifies a
        set of eight ports, with the first octet specifying 
        ports 1 through 8, the second octet specifying ports 9
        through 16, etc.   Within each octet, the most
        significant bit represents the lowest numbered
        port, and the least significant bit represents the
        highest numbered port.  Thus, each port of the
        VLAN is represented by a single bit within the
        value of this object.  If that bit has a value of
        '1' then that port is included in the set of
        ports; the port is not included if its bit has a
        value of '0'.

        A port number is the value of dot1dBasePort for
        the port in the BRIDGE-MIB (RFC 1493)." 
    ::= { vmMembershipSummaryEntry 3 }
 


vmMembershipTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VmMembershipEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A table for configuring VLAN port membership.
        There is one row for each bridge port that is
        assigned to a static or dynamic access port. Trunk
        ports are not  represented in this table.  An entry
        may be created and deleted when ports are created or
        deleted via SNMP or the management console on a 
        device."
    ::= { vmMembership 2 }

vmMembershipEntry OBJECT-TYPE
    SYNTAX          VmMembershipEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry (conceptual row) in the vmMembershipTable."
    INDEX           { ifIndex } 
    ::= { vmMembershipTable 1 }

VmMembershipEntry ::= SEQUENCE {
        vmVlanType   INTEGER ,
        vmVlan       INTEGER,
        vmPortStatus INTEGER ,
        vmVlans      OCTET STRING,
        vmVlans2k    OCTET STRING,
        vmVlans3k    OCTET STRING,
        vmVlans4k    OCTET STRING
}

vmVlanType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        static(1),
                        dynamic(2),
                        multiVlan(3)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The type of VLAN membership assigned to this port.
        A port with static vlan membership is assigned to a
        single VLAN directly. A port with dynamic membership
        is assigned a single VLAN based on content of packets
        received on the port and via VQP queries to VMPS.
        A port with multiVlan membership may be assigned to
        one or more VLANs directly.

        A static or dynamic port membership is specified
        by the value of vmVlan. A multiVlan port membership is
        specified by the value of vmVlans." 
    ::= { vmMembershipEntry 1 }

vmVlan OBJECT-TYPE
    SYNTAX          INTEGER (0..4095)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The VLAN id of the VLAN the port is assigned to
        when vmVlanType is set to static or dynamic.
        This object is not instantiated if not applicable.

        The value may be 0 if the port is not assigned
        to a VLAN.

        If vmVlanType is static, the port is always
        assigned to a VLAN and the object may not be
        set to 0.

        If vmVlanType is dynamic the object's value is
        0 if the port is currently not assigned to a VLAN.
        In addition, the object may be set to 0 only." 
    ::= { vmMembershipEntry 2 }

vmPortStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        inactive(1),
                        active(2),
                        shutdown(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "An indication of the current VLAN status of the port.
        A status of inactive(1) indicates that a dynamic port
        does not yet have a VLAN assigned, or a port is 
        assigned to a VLAN that is currently not active. A 
        status of active(2) indicates that the currently 
        assigned VLAN is active. A status of shutdown(3) 
        indicates that the port has been disabled as a result
        of VQP shutdown response." 
    ::= { vmMembershipEntry 3 }

vmVlans OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The VLAN(s) the port is assigned to when the
        port's vmVlanType is set to multiVlan.
        This object is not instantiated if not applicable.

        The port is always assigned to one or more VLANs
        and the object may not be set so that there are
        no vlans assigned.

        Each octet within the value of this object specifies a
        set of eight VLANs, with the first octet specifying
        VLAN id 1 through 8, the second octet specifying VLAN
        ids 9 through 16, etc.   Within each octet, the most
        significant bit represents the lowest numbered
        VLAN id, and the least significant bit represents the
        highest numbered VLAN id.  Thus, each VLAN of the
        port is represented by a single bit within the
        value of this object.  If that bit has a value of
        '1' then that VLAN is included in the set of
        VLANs; the VLAN is not included if its bit has a
        value of '0'." 
    ::= { vmMembershipEntry 4 }

vmVlans2k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The VLAN(s) the port is assigned to when the
        port's vmVlanType is set to multiVlan.
        This object is not instantiated if not applicable.

        The port is always assigned to one or more VLANs
        and the object may not be set so that there are
        no vlans assigned.

        Each octet within the value of this object specifies a
        set of eight VLANs, with the first octet specifying
        VLAN id 1024 through 1031, the second octet specifying 
        VLAN ids 1032 through 1039, etc.  Within each octet, 
        the most significant bit represents the lowest 
        numbered VLAN id, and the least significant bit 
        represents the highest numbered VLAN id.  Thus, each 
        VLAN of the port is represented by a single bit within
        the value of this object.  If that bit has a value of
        '1' then that VLAN is included in the set of
        VLANs; the VLAN is not included if its bit has a
        value of '0'." 
    ::= { vmMembershipEntry 5 }

vmVlans3k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The VLAN(s) the port is assigned to when the
        port's vmVlanType is set to multiVlan.
        This object is not instantiated if not applicable.

        The port is always assigned to one or more VLANs
        and the object may not be set so that there are
        no vlans assigned.

        Each octet within the value of this object specifies a
        set of eight VLANs, with the first octet specifying
        VLAN id 2048 through 2055, the second octet specifying 
        VLAN ids 2056 through 2063, etc.   Within each octet, 
        the most significant bit represents the lowest 
        numbered VLAN id, and the least significant bit 
        represents the highest numbered VLAN id.  Thus, each
        VLAN of the port is represented by a single bit within
        the value of this object.  If that bit has a value of
        '1' then that VLAN is included in the set of
        VLANs; the VLAN is not included if its bit has a
        value of '0'." 
    ::= { vmMembershipEntry 6 }

vmVlans4k OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE  (0..128))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The VLAN(s) the port is assigned to when the
        port's vmVlanType is set to multiVlan.
        This object is not instantiated if not applicable.

        The port is always assigned to one or more VLANs
        and the object may not be set so that there are
        no vlans assigned.

        Each octet within the value of this object specifies a
        set of eight VLANs, with the first octet specifying
        VLAN id 3072 through 3079, the second octet specifying 
        VLAN ids 3040 through 3047, etc.   Within each octet, 
        the most significant bit represents the lowest 
        numbered VLAN id, and the least significant bit 
        represents the highest numbered VLAN id.  Thus, each
        VLAN of the port is represented by a single bit within
        the value of this object.  If that bit has a value of
        '1' then that VLAN is included in the set of
        VLANs; the VLAN is not included if its bit has a
        value of '0'." 
    ::= { vmMembershipEntry 7 }
 


vmMembershipSummaryExtTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VmMembershipSummaryExtEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A summary of VLAN membership of non-trunk
        bridge ports. This table is used for 
        retrieving VLAN membership information
        for the device which supports dot1dBasePort 
        with value greater than 2048.

        A row is created for a VLAN and a particular
        bridge port range, where at least one port 
        in the range is assigned to this VLAN.

        VLAN membership can only be modified via the
        vmMembershipTable."
    ::= { vmMembership 3 }

vmMembershipSummaryExtEntry OBJECT-TYPE
    SYNTAX          VmMembershipSummaryExtEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry (conceptual row) in the
        vmMembershipSummaryExtTable."
    INDEX           {
                        vmMembershipSummaryVlanIndex,
                        vmMembershipPortRangeIndex
                    } 
    ::= { vmMembershipSummaryExtTable 1 }

VmMembershipSummaryExtEntry ::= SEQUENCE {
        vmMembershipPortRangeIndex  CiscoPortListRange,
        vmMembershipSummaryExtPorts CiscoPortList
}

vmMembershipPortRangeIndex OBJECT-TYPE
    SYNTAX          CiscoPortListRange
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The bridge port range index of this row." 
    ::= { vmMembershipSummaryExtEntry 1 }

vmMembershipSummaryExtPorts OBJECT-TYPE
    SYNTAX          CiscoPortList
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The set of the device's member ports that belong
        to the VLAN. It has the VLAN membership information
        of up to 2k ports with the port number starting from
        the information indicated in vmMembershipPortRangeIndex
        object of the same row. For example, if the value
        of vmMembershipPortRangeIndex is 'twoKto4K', the
        port number indicated in this object starting from
        2049 and ending to 4096. 

        A port number is the value of dot1dBasePort for
        the port in the BRIDGE-MIB (RFC 1493)." 
    ::= { vmMembershipSummaryExtEntry 2 }
 


vmVlanCreationMode OBJECT-TYPE
    SYNTAX          INTEGER  {
                        automatic(1),
                        manual(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to determine whether or not
        a non-existing VLAN will be created automatically
        by the system after assigned to a port.

        automatic(1):  a non-existing VLAN will be created
                       automatically by the system after
                       assigned to a port.

        manual(2):     a non-existing VLAN will not be created
                       automatically by the system and need to be
                       manually created by the users after assigned
                       to a port." 
    ::= { vmMembership 4 }

-- VQP Statistics

vmVQPQueries OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The total number of VQP requests sent by this device
        to all VMPS since last system re-initialization." 
    ::= { vmStatistics 1 }

vmVQPResponses OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of VQP responses received by this device
        from all VMPS since last system re-initialization." 
    ::= { vmStatistics 2 }

vmVmpsChanges OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of times, since last system
        re-initialization, the current VMPS was changed. The
        current VMPS is changed whenever the VMPS fails to 
        response after vmVmpsRetries of a VQP request." 
    ::= { vmStatistics 3 }

vmVQPShutdown OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of times, since last system
        re-initialization, a VQP response indicates 
        'shutdown'. A 'shutdown' response is a result of 
        the membership policy configured at a VMPS
        by the administrator." 
    ::= { vmStatistics 4 }

vmVQPDenied OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of times, since last system
        re-initialization, a VQP response indicates 
        'denied'. A 'denied' response is a result of 
        the membership policy configured at a VMPS
        by the administrator." 
    ::= { vmStatistics 5 }

vmVQPWrongDomain OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of times, since last system
        re-initialization, a VQP response indicates wrong 
        management domain. A wrong management domain 
        response indicates that the VMPS used serves a 
        management domain that is different
        from the device's management domain." 
    ::= { vmStatistics 6 }

vmVQPWrongVersion OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of times, since last system
        re-initialization, a VQP response indicates wrong 
        VQP version. A wrong VQP version response 
        indicates that the VMPS used supports a VQP 
        version that is different from the device's 
        VQP version." 
    ::= { vmStatistics 7 }

vmInsufficientResources OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of times, since last system
        re-initialization, a VQP response indicates 
        insufficient resources. An insufficient resources 
        response indicates that the VMPS used does not 
        have the required resources to verify the
        membership assignment requested." 
    ::= { vmStatistics 8 }

-- Status

vmNotificationsEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "An indication of whether the notifications/traps
        defined in this MIB are enabled." 
    ::= { vmStatus 1 }
-- Voice Vlan Configuration

vmVoiceVlanTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF VmVoiceVlanEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A table for configuring the Voice VLAN-ID
        for the ports. An entry will exist for each
        interface which supports Voice Vlan feature."
    ::= { vmVoiceVlan 1 }

vmVoiceVlanEntry OBJECT-TYPE
    SYNTAX          VmVoiceVlanEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry (conceptual row) in the vmVoiceVlanTable.
        Only interfaces which support Voice Vlan feature
        are shown."
    INDEX           { ifIndex } 
    ::= { vmVoiceVlanTable 1 }

VmVoiceVlanEntry ::= SEQUENCE {
        vmVoiceVlanId              INTEGER,
        vmVoiceVlanCdpVerifyEnable TruthValue
}

vmVoiceVlanId OBJECT-TYPE
    SYNTAX          INTEGER (0..4096)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The Voice Vlan ID (VVID) to which this
        port belongs to.

        0    -    The CDP packets transmitting 
                  through this port would contain
                  Appliance VLAN-ID TLV with value 
                  of 0. VoIP and related packets 
                  are expected to be sent and 
                  received with VLAN-id=0 and an 
                  802.1p priority. 

        1..4094 - The CDP packets transmitting
                  through this port would contain
                  Appliance VLAN-ID TLV with N.
                  VoIP and related packets are
                  expected to be sent and received
                  with VLAN-id=N and an 802.1p
                  priority.

        4095  -   The CDP packets transmitting
                  through this port would contain
                  Appliance VLAN-ID TLV with value
                  of 4095. VoIP and related packets
                  are expected to be sent and 
                  received untagged without an 
                  802.1p priority.

        4096  -   The CDP packets transmitting 
                  through this port would not 
                  include Appliance VLAN-ID TLV; 
                  or, if the VVID is not supported 
                  on the port, this MIB object will
                  not be configurable and will 
                  return 4096." 
    ::= { vmVoiceVlanEntry 1 }

vmVoiceVlanCdpVerifyEnable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "Enable or Disable the feature of CDP message
        verification of voice VLANs.

        true   - The voice VLAN vmVoiceVlan is enabled 
                 only after CDP messages are received 
                 from the IP phone.

        false -  The voice VLAN vmVoiceVlan is enabled
                 as soon as the IP phone interface is
                 up. There is no verification needed 
                 from CDP messages from the IP phone." 
    ::= { vmVoiceVlanEntry 2 }
 

-- Notifications

vmNotifications  OBJECT IDENTIFIER
    ::= { ciscoVlanMembershipMIB 2 }

vmNotificationsPrefix  OBJECT IDENTIFIER
    ::= { vmNotifications 0 }


vmVmpsChange NOTIFICATION-TYPE
    OBJECTS         { vmVmpsIpAddress }
    STATUS          current
    DESCRIPTION
        "A VMPS change notification is generated whenever
        vmVmpsChanges is incremented. The IP address
        of the new VMPS is sent."
   ::= { vmNotificationsPrefix 1 }
-- Conformance

vmMIBConformance  OBJECT IDENTIFIER
    ::= { ciscoVlanMembershipMIB 3 }

vmMIBCompliances  OBJECT IDENTIFIER
    ::= { vmMIBConformance 1 }

vmMIBGroups  OBJECT IDENTIFIER
    ::= { vmMIBConformance 2 }


vmMIBCompliance MODULE-COMPLIANCE
    STATUS          obsolete
    DESCRIPTION
        "The   compliance   statement for   entities    which
        implement the VLANs."
    MODULE          -- this module
    MANDATORY-GROUPS { vmMembershipGroup }

    GROUP           vmVQPClientGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vmVQPNotificationsGroup
    DESCRIPTION
        "A VQP client must implement this group."
    ::= { vmMIBCompliances 1 }

vmMIBCompliance2 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The   compliance   statement for   entities    which
        implement the VLANs."
    MODULE          -- this module
    MANDATORY-GROUPS { vmMembershipGroup2 }

    GROUP           vmVQPClientGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vmVQPNotificationsGroup
    DESCRIPTION
        "A VQP client must implement this group."
    ::= { vmMIBCompliances 2 }

vmMIBCompliance3 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The   compliance   statement for   entities    which
        implement the VLANs."
    MODULE          -- this module
    MANDATORY-GROUPS { vmMembershipGroup2 }

    GROUP           vmVQPClientGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vmVQPNotificationsGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vm4kVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the range of VlanIndex
        between 1024 and 4095."
    ::= { vmMIBCompliances 3 }

vmMIBCompliance4 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The   compliance   statement for   entities    which
        implement the VLANs."
    MODULE          -- this module
    MANDATORY-GROUPS { vmMembershipGroup3 }

    GROUP           vmVQPClientGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vmVQPNotificationsGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vm1kVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the multiVlan
        membership."

    GROUP           vm4kVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the range of VlanIndex
        between 1024 and 4095 and multiVlan
        membership."

    GROUP           vmStatusGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the 
        traps/notifications defined in this
        MIB."

    GROUP           vmVoiceVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the Voice VLAN
        feature."

    OBJECT          vmVlanType
    SYNTAX          INTEGER  {
                        static(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required. Only static(1)
        is required to be implemented."
    ::= { vmMIBCompliances 4 }

vmMIBCompliance5 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The   compliance   statement for   entities    which
        implement the VLANs."
    MODULE          -- this module
    MANDATORY-GROUPS { vmMembershipGroup3 }

    GROUP           vmVQPClientGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vmVQPNotificationsGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vm1kVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the multiVlan
        membership."

    GROUP           vm4kVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the range of VlanIndex
        between 1024 and 4095 and multiVlan
        membership."

    GROUP           vmStatusGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the
        traps/notifications defined in this
        MIB."

    GROUP           vmVoiceVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the Voice VLAN
        feature."

    GROUP           vmVoiceVlanExtGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the CDP only
        verification of Voice VLAN feature."

    OBJECT          vmVlanType
    SYNTAX          INTEGER  {
                        static(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required. Only static(1)
        is required to be implemented."
    ::= { vmMIBCompliances 5 }

vmMIBCompliance6 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The   compliance   statement for   entities    which
        implement the VLANs."
    MODULE          -- this module
    MANDATORY-GROUPS { vmMembershipGroup3 }

    GROUP           vmVQPClientGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vmVQPNotificationsGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vm1kVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the multiVlan
        membership."

    GROUP           vm4kVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the range of VlanIndex
        between 1024 and 4095 and multiVlan
        membership."

    GROUP           vmStatusGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the
        traps/notifications defined in this
        MIB."

    GROUP           vmVoiceVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the Voice VLAN
        feature."

    GROUP           vmVoiceVlanExtGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the CDP only
        verification of Voice VLAN feature."

    GROUP           vmMembershipExtGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the VLAN 
        membership feature with bridge port 
        ID greater than 2048."

    OBJECT          vmVlanType
    SYNTAX          INTEGER  {
                        static(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required. Only static(1)
        is required to be implemented."
    ::= { vmMIBCompliances 6 }

vmMIBCompliance7 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "The   compliance   statement for   entities    which
        implement the VLANs."
    MODULE          -- this module
    MANDATORY-GROUPS { vmMembershipGroup3 }

    GROUP           vmVQPClientGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vmVQPNotificationsGroup
    DESCRIPTION
        "A VQP client must implement this group."

    GROUP           vm1kVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the multiVlan
        membership."

    GROUP           vm4kVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the range of VlanIndex
        between 1024 and 4095 and multiVlan
        membership."

    GROUP           vmStatusGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the
        traps/notifications defined in this
        MIB."

    GROUP           vmVoiceVlanGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the Voice VLAN
        feature."

    GROUP           vmVoiceVlanExtGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the CDP only
        verification of Voice VLAN feature."

    GROUP           vmMembershipExtGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the VLAN
        membership feature with bridge port
        ID greater than 2048."

    GROUP           vmVlanCreationGroup
    DESCRIPTION
        "This group must be implemented by the
        entities which support the configuration
        on the VLAN creation mode when assigning a
        non-existing VLAN to a port."

    OBJECT          vmVlanType
    SYNTAX          INTEGER  {
                        static(1)
                    }
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required. Only static(1)
        is required to be implemented."
    ::= { vmMIBCompliances 7 }

-- Units of Conformance

vmMembershipGroup OBJECT-GROUP
    OBJECTS         {
                        vmMembershipSummaryMemberPorts,
                        vmVlan,
                        vmVlanType,
                        vmPortStatus
                    }
    STATUS          deprecated
    DESCRIPTION
        "A collection of objects for displaying and
        configuring VLAN membership."
    ::= { vmMIBGroups 1 }

vmVQPClientGroup OBJECT-GROUP
    OBJECTS         {
                        vmVmpsVQPVersion,
                        vmVmpsRetries,
                        vmVmpsReconfirm,
                        vmVmpsReconfirmInterval,
                        vmVmpsReconfirmResult,
                        vmVmpsCurrent,
                        vmVmpsIpAddress,
                        vmVmpsPrimary,
                        vmVmpsRowStatus,
                        vmVQPQueries,
                        vmVQPResponses,
                        vmVmpsChanges,
                        vmVQPShutdown,
                        vmVQPDenied,
                        vmVQPWrongDomain,
                        vmVQPWrongVersion,
                        vmInsufficientResources
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects for the managing a VQP
        client."
    ::= { vmMIBGroups 2 }

vmVQPNotificationsGroup NOTIFICATION-GROUP
   NOTIFICATIONS    { vmVmpsChange }
    STATUS          current
    DESCRIPTION
        "The notification group for a VQP client."
    ::= { vmMIBGroups 3 }

vmStatusGroup OBJECT-GROUP
    OBJECTS         { vmNotificationsEnabled }
    STATUS          current
    DESCRIPTION
        "A collection of objects for conveying general
        status information."
    ::= { vmMIBGroups 4 }

vmMembershipGroup2 OBJECT-GROUP
    OBJECTS         {
                        vmMembershipSummaryMemberPorts,
                        vmVlan,
                        vmVlans,
                        vmVlanType,
                        vmPortStatus
                    }
    STATUS          deprecated
    DESCRIPTION
        "A collection of objects for displaying and
        configuring VLAN membership."
    ::= { vmMIBGroups 5 }

vm4kVlanGroup OBJECT-GROUP
    OBJECTS         {
                        vmVlans2k,
                        vmVlans3k,
                        vmVlans4k
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects providing multiVlan
        information for VLANS with VlanIndex from 
        1024 to 4095 which are assigned to one port."
    ::= { vmMIBGroups 6 }

vmVoiceVlanGroup OBJECT-GROUP
    OBJECTS         { vmVoiceVlanId }
    STATUS          current
    DESCRIPTION
        "A collection of objects providing information
        of Voice Vlan feature."
    ::= { vmMIBGroups 7 }

vm1kVlanGroup OBJECT-GROUP
    OBJECTS         { vmVlans }
    STATUS          current
    DESCRIPTION
        "A collection of objects providing multiVlan
        information for VLANS with VlanIndex from 
        0 to 1023 which are assigned to one port."
    ::= { vmMIBGroups 8 }

vmMembershipGroup3 OBJECT-GROUP
    OBJECTS         {
                        vmMembershipSummaryMember2kPorts,
                        vmVlan,
                        vmVlanType,
                        vmPortStatus
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects for displaying and
        configuring VLAN membership."
    ::= { vmMIBGroups 9 }

vmVoiceVlanExtGroup OBJECT-GROUP
    OBJECTS         { vmVoiceVlanCdpVerifyEnable }
    STATUS          current
    DESCRIPTION
        "A collection of objects providing the
        information of CDP verification 
        of Voice Vlan feature."
    ::= { vmMIBGroups 10 }

vmMembershipExtGroup OBJECT-GROUP
    OBJECTS         { vmMembershipSummaryExtPorts }
    STATUS          current
    DESCRIPTION
        "A collection of objects providing
        information for VLAN membership with 
        bridge port ID greater than 2048."
    ::= { vmMIBGroups 11 }

vmVlanCreationGroup OBJECT-GROUP
    OBJECTS         { vmVlanCreationMode }
    STATUS          current
    DESCRIPTION
        "A collection of objects for the configuration
        on VLAN creation mode when assigning a
        non-existing VLAN to a port."
    ::= { vmMIBGroups 12 }

END