path: root/MIBS/cisco/CISCO-POWER-ETHERNET-EXT-MIB

-- *****************************************************************
-- CISCO-POWER-ETHERNET-EXT-MIB
--   
-- Ported from flo_dsbu7
--   
-- Nov 2011, ovld-sw-platform-dev
-- March 2004, Seth Wang
--   
-- Copyright (c) 2004-2007, 2010-2013, 2017-2018 by Cisco Systems, Inc.
--   
-- All rights reserved.
-- ****************************************************************

CISCO-POWER-ETHERNET-EXT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Unsigned32,
    NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION,
    TruthValue
        FROM SNMPv2-TC
    pethPsePortEntry,
    pethMainPseGroupIndex,
    pethPsePortGroupIndex,
    pethPsePortIndex
        FROM POWER-ETHERNET-MIB
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    EntPhysicalIndexOrZero
        FROM CISCO-TC
    ciscoMgmt
        FROM CISCO-SMI;


ciscoPowerEthernetExtMIB MODULE-IDENTITY
    LAST-UPDATED    "201801190000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA 95134
            USA

            Tel: +1 800 553-NETS

            E-mail: cs-lan-switch-snmp@cisco.com"
    DESCRIPTION
        "A MIB module for extending the POWER-ETHERNET-MIB
        (RFC3621) to add objects which provide additional
        management information about Power Sourcing Equipment
        (PSE) not available in POWER-ETHERNET-MIB.

        Glossary

        Power Sourcing Equipment (PSE)
            These are devices supplying electrical power to
            other equipment. They are, for example, inline power
            switches, inline power daughterboards and power patch
            panels.

        Powered Device (PD)
            These are devices receiving their electrical power
            supply from Power Sourcing Equipment. They are, for
            example, IP telephones and wireless access points
            or bridges."
    REVISION        "201801190000Z"
    DESCRIPTION
        "Added following OBJECT-GROUP
        - cpeExtPseInfoPwrGroup
        Added new compliance
        - cpeExtMIBCompliance6."
    REVISION        "201307100000Z"
    DESCRIPTION
        "Added following TEXTUAL-CONVENTION
        - CpeExtLldpPwrClassOrZero
        Added following OBJECT-GROUP
        - cpeExtPsePortLldpPowerGroup
        Added new compliance
        - cpeExtMIBCompliance5."
    REVISION        "201107180000Z"
    DESCRIPTION
        "Added cpeExtPowerPriorityGroup, cpeExtPsePortLldpGroup
        and cpeExtPsePortCapabilitiesGroup.

        Added a new enumeration 'class4' in cpeExtPdStatsClass.

        Added TEXTUAL-CONVENTION CpeExtLldpPwrType,
        CpeExtLldpPwrSrc, and CpeExtPwrPriority."
    REVISION        "200912040000Z"
    DESCRIPTION
        "Updated the DESCRIPTION of cpeExtPolicingNotif."
    REVISION        "200704120000Z"
    DESCRIPTION
        "Added 'overdrawLog' value to cpeExtPsePortAdditionalStatus.
        Added cpeExtPortPolicingActionGroup, cpeExtPortPwrManAllocGroup
        cpeExtPolicingNotifEnableGroup, and cpeExtPolicingNotifGroup."
    REVISION        "200702020000Z"
    DESCRIPTION
        "Added cpeExtPsePortEntPhyIndex,
        cpeExtPsePortPolicingCapable and 
        cpeExtPsePortPolicingEnable to cpeExtPsePortTable.
        Added cpeExtPdStatsTotalDevices and cpeExtPdStatsTable.
        Added enumerated value disable(5) to cpeExtPsePortEnable."
    REVISION        "200506100000Z"
    DESCRIPTION
        "Added 'limit' to cpeExtPsePortEnable, 'overdraw' to
        cpeExtPsePortAdditionalStatus and the groups
        cpeExtPsePortPwrMonitorGroup and
        cpeExtMainPseGroup."
    REVISION        "200404120000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoMgmt 402 }


cpeExtMIBNotifs  OBJECT IDENTIFIER
    ::= { ciscoPowerEthernetExtMIB 0 }

cpeExtMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoPowerEthernetExtMIB 1 }

cpeExtMIBConformance  OBJECT IDENTIFIER
    ::= { ciscoPowerEthernetExtMIB 2 }


CpeExtLldpPwrType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The requested Data Terminal Equipment (DTE) Power via
        Media Dependent Interface (MDI) type based on Data Link Layer
        (DLL) power classification.

        In Data Link Layer power classification, the PSE and PD perform 
        power negotiation using the Link Layer Discovery Protocol (LLDP)
        as soon as the data link is established. It has finer power
        resolution than the Physical Layer power classification and has
        the ability for the PSE and PD to participate in dynamic power
        allocation wherein allocated power to the PD may change one or
        more times during PD operation.

        'type1Pd'  - A PD that advertises a power draw less than or 
                     equal to 12.95 W (at the PD).
        'type1Pse' - A PSE that is designed to support a Type 1 PD.
        'type2Pd'  - A PD that advertises a power draw greater than
                     12.95 W (at the PD).
        'type2Pse  - A PSE that is designed to support either a Type 1
                     or a Type 2 PD."
    SYNTAX          INTEGER  {
                        type1Pd(1),
                        type1Pse(2),
                        type2Pd(3),
                        type2Pse(4)
                    }

CpeExtLldpPwrSrc ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The power source of the PD or PSE port which implements the
        LLDP based Data Link Layer power classification.

        'pseAndLocal'   - A PD powered both locally and by a PSE.
        'local'         - A PD powered locally only.
        'pse'           - A PD powered by a PSE only.
        'backupSrc'     - A PSE powered by a backup power source.
        'primarySrc'    - A PSE powered by its primary power source.
        'unknown'       - A PD or PSE where the power source is
                          unknown."
    SYNTAX          INTEGER  {
                        pseAndLocal(1),
                        local(2),
                        pse(3),
                        backupSrc(4),
                        primarySrc(5),
                        unknown(6)
                    }

CpeExtPwrPriority ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The power priority for the PD on the PSE port which implements
        the LLDP based Data Link Layer power classification.

        'critical' - power priority is at critical level.
        'high'     - power priority is at high level.
        'low'      - power priority is at low level.
        'unknown'  - power priority level is unknown."
    SYNTAX          INTEGER  {
                        critical(1),
                        high(2),
                        low(3),
                        unknown(4)
                    }

CpeExtLldpPwrClassOrZero ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "The power class of the PD or PSE port that implements
        the LLDP based Data Link Layer power classification

        'unknown' - power classification of the powered devices is
                    unknown.

        'class0'  - power classification of the powered devices is
                    class 0 in IEEE specifications.

        'class1'  - power classification of the powered devices is
                    class 1 in IEEE specifications.

        'class2'  - power classification of the powered devices is
                    class 2 in IEEE specifications.

        'class3'  - power classification of the powered devices is
                    class 3 in IEEE specifications.

        'class4'  - power classification of the powered devices is
                    class 4 in IEEE specifications."
    SYNTAX          INTEGER  {
                        unknown(0),
                        class0(1),
                        class1(2),
                        class2(3),
                        class3(4),
                        class4(5)
                    }

cpeExtDefaultAllocation OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object indicates the default inline power allocation per
        port. This is a global configuration parameter that applies
        to all inline power capable ports in the system.

        The system must consider this object as well as the per port
        configuration object, cpeExtPsePortPwrMax, when determining
        how much power to allocate to a port. The system will use the
        lower of the two numbers." 
    ::= { cpeExtMIBObjects 1 }

cpeExtPsePortTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CpeExtPsePortEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table extends the POWER-ETHERNET-MIB pethPsePortTable
        for power Ethernet ports on a Powered Sourcing Equipment
        (PSE) device."
    REFERENCE       "RFC3621"
    ::= { cpeExtMIBObjects 2 }

cpeExtPsePortEntry OBJECT-TYPE
    SYNTAX          CpeExtPsePortEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cpeExtPsePortEntry extends a corresponding
        pethPsePortTable entry. This entry displays and
        controls more characteristics of a power Ethernet
        port on a PSE device."
    AUGMENTS           { pethPsePortEntry  } 
    ::= { cpeExtPsePortTable 1 }

CpeExtPsePortEntry ::= SEQUENCE {
        cpeExtPsePortEnable           INTEGER,
        cpeExtPsePortDiscoverMode     INTEGER,
        cpeExtPsePortDeviceDetected   TruthValue,
        cpeExtPsePortIeeePd           TruthValue,
        cpeExtPsePortAdditionalStatus BITS,
        cpeExtPsePortPwrMax           Unsigned32,
        cpeExtPsePortPwrAllocated     Unsigned32,
        cpeExtPsePortPwrAvailable     Unsigned32,
        cpeExtPsePortPwrConsumption   Unsigned32,
        cpeExtPsePortMaxPwrDrawn      Unsigned32,
        cpeExtPsePortEntPhyIndex      EntPhysicalIndexOrZero,
        cpeExtPsePortPolicingCapable  TruthValue,
        cpeExtPsePortPolicingEnable   INTEGER,
        cpeExtPsePortPolicingAction   INTEGER,
        cpeExtPsePortPwrManAlloc      Unsigned32,
        cpeExtPsePortCapabilities     BITS
}

cpeExtPsePortEnable OBJECT-TYPE
    SYNTAX          INTEGER  {
                        auto(1),
                        static(2),
                        limit(3),
                        disable(4)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is an extension of the pethPsePortAdminEnable
        object from RFC3621. It allows the user to be more specific
        when enabling the PSE functions. The states, 'auto', 'static'
        and 'limit' correspond to a value of 'true' for the
        pethPsePortAdminEnable object. The state 'disable' corresponds
        to a value of 'false' for the pethPsePortAdminEnable object.

        Setting this value to 'auto' enables Powered Device discovery
        on the interface and the amount of power allocated depends on
        the Powered Device discovered. If pethPsePortAdminEnable was
        'false' prior to this set operation, then it will become
        'true'.

        Setting this value to 'static' will also enable Powered
        Device discovery. However, this is different from 'auto'
        in that the amount of power is pre-allocated based on the
        configuration on the Power Sourcing Equipment. If
        pethPsePortAdminEnable was 'false' prior to this set
        operation, then it will become 'true'.

        Setting this value to 'limit' enables Powered Device
        discovery on the interface. The amount of power allocated
        depends on the Powered Device discovered and the value
        of cpeExtPsePortPwrMax. The lower value will be used.
        If pethPsePortAdminEnable was 'false' prior to this set
        operation, then it will become 'true'.

        Setting this value to 'disable' disables the PSE functions.
        The pethPsePortAdminEnable object will adopt the value of
        'false' if it was 'true' prior to this set operation. When
        setting the pethPsePortAdminEnable object to 'false' this
        object cpeExtPsePortEnable will adopt the value of 'disable'.

        If cpeExtPsePortPolicingCapable of the PSE port, or
        cpeExtMainPsePwrMonitorCapable of the PSE port's
        main group, has the value of 'false', this object
        can only be set to 'auto', 'static' or 'disable'.
        Otherwise, this object can be set to 'auto', 'static',
        'limit' or 'disable'." 
    ::= { cpeExtPsePortEntry 1 }

cpeExtPsePortDiscoverMode OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unknown(1),
                        off(2),
                        ieee(3),
                        cisco(4),
                        ieeeAndCisco(5)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the discover mode used by the system to
        discover the PD.

        A value of 'unknown' indicates that the discover mode on the
        interface is unknown.

        A value of 'off' indicates that discovery is disabled on the
        interface.

        A value of 'ieee' indicates that the discover mode on the
        interface is IEEE based.

        A value of 'cisco' indicates that the discover mode on the
        interface is Cisco based.

        A value of 'ieeeAndCisco' indicates that the discover mode on
        the interface is both IEEE and Cisco based." 
    ::= { cpeExtPsePortEntry 2 }

cpeExtPsePortDeviceDetected OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates if a Powered Device (PD) has been
        detected on the interface.

        A value of 'true' indicates that a PD has been detected on
        the interface.

        A value of 'false' indicates that no PD has been detected on
        the interface." 
    ::= { cpeExtPsePortEntry 3 }

cpeExtPsePortIeeePd OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether the Powered Device attached
        to the interface is an IEEE compliant Powered Device or not.

        A value of 'true' indicates the attached Powered Device is
        an IEEE compliant Powered Device.

        A value of 'false' indicates the attached Powered Device
        is not an IEEE compliant Powered Device. This also means
        that the value of the corresponding object from the
        pethPsePortTable, pethPsePortPowerClassifications is
        irrelevant." 
    ::= { cpeExtPsePortEntry 4 }

cpeExtPsePortAdditionalStatus OBJECT-TYPE
    SYNTAX          BITS {
                        deny(0),
                        overdraw(1),
                        overdrawLog(2)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object is an extension of the pethPsePortDetectionStatus
        object from RFC3621 and provides additional status
        information.

        deny: When set, the PD attached to the interface is being
              denied power due to insufficient power resources on
              the Power Sourcing Equipment.

        overdraw: When set, the PD attached to the interface is 
                  being denied power because the PD is trying 
                  to consume more power than it has been 
                  configured to consume.

        overdrawLog: When set, the PD attached to the interface 
                     is trying to consume more power than it has 
                     been configured to consume, but is not being 
                     denied power." 
    ::= { cpeExtPsePortEntry 5 }

cpeExtPsePortPwrMax OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This indicates the maximum amount of power that the PSE will
        make available to the PD connected to this interface." 
    ::= { cpeExtPsePortEntry 6 }

cpeExtPsePortPwrAllocated OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the amount of power allocated from the
        PSE for the PD." 
    ::= { cpeExtPsePortEntry 7 }

cpeExtPsePortPwrAvailable OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the amount of power available for
        the PD to use. This value may differ from the value
        cpeExtPsePortPwrAllocated due to the efficiency issues
        of delivering the power from the PSE to the PD.

        When sufficient power is available to power a PD, this
        value should be equal to the lower of the two objects,
        cpeExtDefaultAllocation and cpeExtPsePortPwrMax." 
    ::= { cpeExtPsePortEntry 8 }

cpeExtPsePortPwrConsumption OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This indicates the actual power consumption of the PD
        connected to this interface. It may not necessarily
        be equal to the value of cpeExtPsePortPwrAvailable." 
    ::= { cpeExtPsePortEntry 9 }

cpeExtPsePortMaxPwrDrawn OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This indicates the maximum amount of power drawn by the PD
        connected to this interface, since it was powered on." 
    ::= { cpeExtPsePortEntry 10 }

cpeExtPsePortEntPhyIndex OBJECT-TYPE
    SYNTAX          EntPhysicalIndexOrZero
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The entPhysicalIndex value that uniquely identifies the
        PSE port. If the PSE port does not have a corresponding 
        physical entry in entPhysicalTable or if the 
        entPhysicalTable is not supported by the management
        system, this object has the value of zero."
    REFERENCE       "RFC 2737, entPhysicalIndex." 
    ::= { cpeExtPsePortEntry 11 }

cpeExtPsePortPolicingCapable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates whether the PSE port hardware is
        capable of policing the port for proper power consumption 
        based on the allocated value." 
    ::= { cpeExtPsePortEntry 12 }

cpeExtPsePortPolicingEnable OBJECT-TYPE
    SYNTAX          INTEGER  {
                        on(1),
                        off(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object allows the user to turn on or turn off the
        power policing of the PSE port. If the instance value of 
        cpeExtPsePortPolicingCapable is 'TRUE', the user is allowed
        to set this object to 'on' or 'off'. Otherwise, this
        object is read-only and always has the value of 'off'." 
    ::= { cpeExtPsePortEntry 13 }

cpeExtPsePortPolicingAction OBJECT-TYPE
    SYNTAX          INTEGER  {
                        deny(1),
                        logOnly(2)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the power policing action that
        the device will take on this PSE port when the real-time 
        power consumption exceeds its max power allocation if 
        the value of cpeExtPsePortPolicingEnable is 'on'. 
             'deny'          - the device will deny the power to 
                               the PSE port 
             'logOnly'       - the device will not deny the power 
                               to the PSE port" 
    ::= { cpeExtPsePortEntry 14 }

cpeExtPsePortPwrManAlloc OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the manual power allocation that
        the PSE will allocate to the PD connected to this 
        interface regardless of the amount requested via CDP 
        or IEEE. 

        Setting this object value to zero disables the manual 
        power allocation. 

        Warning: Misconfiguring this manual power allocation may 
        cause damage to the system and void the warranty. Take 
        precautions not to oversubscribe the power supply." 
    ::= { cpeExtPsePortEntry 15 }

cpeExtPsePortCapabilities OBJECT-TYPE
    SYNTAX          BITS {
                        policing(0),
                        poePlus(1)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the PSE functionality that
        this port supports.

        If the 'policing' BIT is set, then this PSE port is
        capable of policing the port for proper power consumption
        based on the allocated value.

        If the 'poePlus' BIT is set, then this PSE port supports
        PoE Plus functions." 
    ::= { cpeExtPsePortEntry 16 }
 


cpeExtMainPseTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CpeExtMainPseEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains the additional information for the
        main PSE group in pethMainPseTable."
    REFERENCE       "RFC3621, pethMainPseTable"
    ::= { cpeExtMIBObjects 3 }

cpeExtMainPseEntry OBJECT-TYPE
    SYNTAX          CpeExtMainPseEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cpeExtMainPseEntry contains information about
        a particular pethMainPseGroupIndex. An entry is
        created by the agent when a main PSE group is added
        to the pethMainPseTable. An entry is deleted by the
        agent when a main PSE group is removed from the
        pethMainPseTable."
    REFERENCE       "RFC3621, pethMainPseTable"
    INDEX           { pethMainPseGroupIndex } 
    ::= { cpeExtMainPseTable 1 }

CpeExtMainPseEntry ::= SEQUENCE {
        cpeExtMainPseEntPhyIndex       EntPhysicalIndexOrZero,
        cpeExtMainPseDescr             SnmpAdminString,
        cpeExtMainPsePwrMonitorCapable TruthValue,
        cpeExtMainPseUsedPower         Unsigned32,
        cpeExtMainPseRemainingPower    Unsigned32
}

cpeExtMainPseEntPhyIndex OBJECT-TYPE
    SYNTAX          EntPhysicalIndexOrZero
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The entPhysicalIndex value that uniquely identifies the
        main PSE group. If the main PSE group does not have a
        corresponding physical entry in entPhysicalTable or if
        the entPhysicalTable is not supported by the management
        system, then this object has the value of zero."
    REFERENCE       "RFC 2737, entPhysicalIndex." 
    ::= { cpeExtMainPseEntry 1 }

cpeExtMainPseDescr OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "A textual string containing information about the Power
        Source Equipment (PSE) group." 
    ::= { cpeExtMainPseEntry 2 }

cpeExtMainPsePwrMonitorCapable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates if the given group is capable of
        monitoring the power consumption of the interfaces that
        belong to the group. The value 'true' means that the
        group is capable. The value 'false' means that the group
        in not capable." 
    ::= { cpeExtMainPseEntry 3 }

cpeExtMainPseUsedPower OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "miliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates used power expressed in miliwatts." 
    ::= { cpeExtMainPseEntry 4 }

cpeExtMainPseRemainingPower OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "miliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates remaining power expressed in
        miliwatts, this parameter is calculated as pethMainPsePower
        minus cpeExtMainPseUsedPower." 
    ::= { cpeExtMainPseEntry 5 }
 

cpeExtPdStatistics  OBJECT IDENTIFIER
    ::= { cpeExtMIBObjects 4 }


cpeExtPdStatsTotalDevices OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of the
        powered devices with any power classifications
        in the system.

        Classification is a way to tag different terminals
        on the Power over LAN network according to their
        power consumption. Devices such as IP telephones,
        WLAN access points and others, will be classified
        according to their power requirements."
    REFERENCE
        "IEEE Std 802.3af Section 30.9.1.1.6
         aPSEPowerClassification" 
    ::= { cpeExtPdStatistics 1 }

cpeExtPdStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CpeExtPdStatsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains the statistics information
        of the powered devices fallen into different power
        classifications in the system."
    REFERENCE
        "IEEE Std 802.3af Section 30.9.1.1.6
               aPSEPowerClassification"
    ::= { cpeExtPdStatistics 2 }

cpeExtPdStatsEntry OBJECT-TYPE
    SYNTAX          CpeExtPdStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cpeExtPdStatsEntry contains the statistics
        information about a particular power classification
        defined in cpeExtPdStatsIndex."
    INDEX           { cpeExtPdStatsClass } 
    ::= { cpeExtPdStatsTable 1 }

CpeExtPdStatsEntry ::= SEQUENCE {
        cpeExtPdStatsClass       INTEGER,
        cpeExtPdStatsDeviceCount Unsigned32
}

cpeExtPdStatsClass OBJECT-TYPE
    SYNTAX          INTEGER  {
                        cisco(1),
                        class0(2),
                        class1(3),
                        class2(4),
                        class3(5),
                        class4(6)
                    }
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The power classification as the index for the
        statistics information for powered devices.

        A value of 'cisco' indicates that the powered
        devices are CISCO proprietary and their power 
        classification does not fall into any class
        in IEEE specifications.

        A value of 'class0' indicates that the power 
        classification of the powered devices falls into
        class 0 in IEEE specifications.

        A value of 'class1' indicates that the power
        classification of the powered devices falls into
        class 1 in IEEE specifications.

        A value of 'class2' indicates that the power
        classification of the powered devices falls into
        class 2 in IEEE specifications.

        A value of 'class3' indicates that the power
        classification of the powered devices falls into
        class 3 in IEEE specifications.

        A value of 'class4' indicates that the power
        classification of the powered devices falls into
        class 4 in IEEE specifications."
    REFERENCE
        "IEEE Std 802.3af Section 30.9.1.1.6
               aPSEPowerClassification" 
    ::= { cpeExtPdStatsEntry 1 }

cpeExtPdStatsDeviceCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the count of the powered
        devices whose power classification falls into 
        a specific value of cpeExtPdStatsIndex." 
    ::= { cpeExtPdStatsEntry 2 }
 


cpeExtPolicingNotifEnable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to enable/disable the
        the cpeExtPolicingNotif notification." 
    ::= { cpeExtMIBObjects 5 }

cpeExtPowerPriorityEnable OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is the global control of the power priority
        feature on the device. 'true' indicates that the power priority
        feature is globally enabled. 'false' indicates that the power
        priority feature is globally disabled." 
    ::= { cpeExtMIBObjects 6 }

cpeExtPsePortLldpTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CpeExtPsePortLldpEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A table provides the Link Layer Discovery Protocol (LLDP)
        based Data Link Layer (DLL) power classification
        characteristics of PSE ports and PDs attached to them."
    ::= { cpeExtMIBObjects 7 }

cpeExtPsePortLldpEntry OBJECT-TYPE
    SYNTAX          CpeExtPsePortLldpEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A cpeExtPsePortLldpEntry entry contains the LLDP
        based 802.3at DLL power classification characteristics for
        a particular PSE and the PD attached to it. 

        A PSE has its entry here when all of the following conditions
        are satisfied:
        - The LLDP power classification is globally enabled.
        - It has a PD attached.
        - LLDP is the operational power negotiation protocol between
          the PSE and the PD attached."
    INDEX           {
                        pethPsePortGroupIndex,
                        pethPsePortIndex
                    } 
    ::= { cpeExtPsePortLldpTable 1 }

CpeExtPsePortLldpEntry ::= SEQUENCE {
        cpeExtPsePortLldpPwrType          CpeExtLldpPwrType,
        cpeExtPsePortLldpPdPwrType        CpeExtLldpPwrType,
        cpeExtPsePortLldpPwrSrc           CpeExtLldpPwrSrc,
        cpeExtPsePortLldpPdPwrSrc         CpeExtLldpPwrSrc,
        cpeExtPsePortLldpPwrPriority      CpeExtPwrPriority,
        cpeExtPsePortLldpPdPwrPriority    CpeExtPwrPriority,
        cpeExtPsePortLldpPwrReq           Unsigned32,
        cpeExtPsePortLldpPdPwrReq         Unsigned32,
        cpeExtPsePortLldpPwrAlloc         Unsigned32,
        cpeExtPsePortLldpPdPwrAlloc       Unsigned32,
        cpeExtPsePortLldpPwrClass         CpeExtLldpPwrClassOrZero,
        cpeExtPsePortLldpPdPwrClass       CpeExtLldpPwrClassOrZero,
        cpeExtPsePortLldpPdPwrSupport     BITS,
        cpeExtPsePortLldpPdPwrPairsOrZero INTEGER
}

cpeExtPsePortLldpPwrType OBJECT-TYPE
    SYNTAX          CpeExtLldpPwrType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The DTE Power via MDI type of the local system (PSE)." 
    ::= { cpeExtPsePortLldpEntry 1 }

cpeExtPsePortLldpPdPwrType OBJECT-TYPE
    SYNTAX          CpeExtLldpPwrType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The DTE Power via MDI type of the remote system (PD)." 
    ::= { cpeExtPsePortLldpEntry 2 }

cpeExtPsePortLldpPwrSrc OBJECT-TYPE
    SYNTAX          CpeExtLldpPwrSrc
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The power source of the local system (PSE)." 
    ::= { cpeExtPsePortLldpEntry 3 }

cpeExtPsePortLldpPdPwrSrc OBJECT-TYPE
    SYNTAX          CpeExtLldpPwrSrc
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The power source of the remote system (PD)." 
    ::= { cpeExtPsePortLldpEntry 4 }

cpeExtPsePortLldpPwrPriority OBJECT-TYPE
    SYNTAX          CpeExtPwrPriority
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The power priority of the local system (PSE)." 
    ::= { cpeExtPsePortLldpEntry 5 }

cpeExtPsePortLldpPdPwrPriority OBJECT-TYPE
    SYNTAX          CpeExtPwrPriority
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The power priority of the remote system (PD)." 
    ::= { cpeExtPsePortLldpEntry 6 }

cpeExtPsePortLldpPwrReq OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The requested PD power value that the local
        system (PSE) mirrors back to the remote system (PD)." 
    ::= { cpeExtPsePortLldpEntry 7 }

cpeExtPsePortLldpPdPwrReq OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The PD requested power value received from
        the remote system (PD)." 
    ::= { cpeExtPsePortLldpEntry 8 }

cpeExtPsePortLldpPwrAlloc OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The PSE allocated power value for the remote
        system (PD)." 
    ::= { cpeExtPsePortLldpEntry 9 }

cpeExtPsePortLldpPdPwrAlloc OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliwatts"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The PSE allocated power value received from the
        remote system (PD)." 
    ::= { cpeExtPsePortLldpEntry 10 }

cpeExtPsePortLldpPwrClass OBJECT-TYPE
    SYNTAX          CpeExtLldpPwrClassOrZero
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The PSE power classification sent to the remote PD via MDI TLV
        in LLDP Protocol."
    REFERENCE
        "IEEE Std 802.3af Section 30.9.1.1.6
        aPSEPowerClassification" 
    ::= { cpeExtPsePortLldpEntry 11 }

cpeExtPsePortLldpPdPwrClass OBJECT-TYPE
    SYNTAX          CpeExtLldpPwrClassOrZero
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This power classification received from the remote
        system (PD)."
    REFERENCE
        "IEEE Std 802.3af Section 30.9.1.1.6
        aPSEPowerClassification" 
    ::= { cpeExtPsePortLldpEntry 12 }

cpeExtPsePortLldpPdPwrSupport OBJECT-TYPE
    SYNTAX          BITS {
                        portClass(0),
                        pseMdiPwrSupport(1),
                        pseMdiPwrState(2),
                        psePairCtrlAbility(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the power support mode received
        from the remote PD via MDI TLV in LLDP protocol.

        'portClass'          - This bit is set if the port is
                               operating as PSE.  Otherwise, it is
                               operating as PD.

        'pseMdiPwrSupport'   - This bit is set if power is supported in
                               MDI TLV.

        'pseMdiPwrState'     - This bit is set if power is enabled.

        'psePairCtrlAbility' - This bit is set if pair selection can
                               be controlled." 
    ::= { cpeExtPsePortLldpEntry 13 }

cpeExtPsePortLldpPdPwrPairsOrZero OBJECT-TYPE
    SYNTAX          INTEGER  {
                        unknown(0),
                        signal(1),
                        spare(2)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the pinout pairs in use received
        from the remote PD via MDI TLV in LLDP Protocol.

        'unknown' - information is not available

        'signal'  - the signal pairs are in use.

        'spare'   - the spare pairs are in use." 
    ::= { cpeExtPsePortLldpEntry 14 }
 


-- Notifications

cpeExtPolicingNotif NOTIFICATION-TYPE
    OBJECTS         {
                        cpeExtPsePortPolicingAction,
                        cpeExtPsePortAdditionalStatus,
                        cpeExtPsePortPwrAllocated,
                        cpeExtPsePortMaxPwrDrawn
                    }
    STATUS          current
    DESCRIPTION
        "This notification is generated when the 'overdraw' or
        'overdrawLog' bit in value of cpeExtPsePortAdditionalStatus
        is set or cleared."
   ::= { cpeExtMIBNotifs 1 }
-- Conformance

cpeExtMIBCompliances  OBJECT IDENTIFIER
    ::= { cpeExtMIBConformance 1 }

cpeExtMIBGroups  OBJECT IDENTIFIER
    ::= { cpeExtMIBConformance 2 }


cpeExtMIBCompliance MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for the
        CISCO-POWER-ETHERNET-EXT-MIB."
    MODULE          -- this module
    MANDATORY-GROUPS { cpeExtPsePortGroup }

    GROUP           cpeExtPsePortGlobalConfigGroup
    DESCRIPTION
        "The cpeExtPsePortGlobalConfigGroup is mandatory for agents
        that support global configurations on the PSE interfaces."
    ::= { cpeExtMIBCompliances 1 }

cpeExtMIBCompliance2 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for the
        CISCO-POWER-ETHERNET-EXT-MIB."
    MODULE          -- this module
    MANDATORY-GROUPS { cpeExtPsePortGroup }

    GROUP           cpeExtPsePortGlobalConfigGroup
    DESCRIPTION
        "The cpeExtPsePortGlobalConfigGroup is mandatory for agents
        that support global configurations on the PSE interfaces."

    GROUP           cpeExtPsePortPwrMonitorGroup
    DESCRIPTION
        "The cpeExtPsePortPwrMonitorGroup is mandatory for agents
        that provide power monitoring on PD's connected to the
        PSE interfaces."

    GROUP           cpeExtMainPseGroup
    DESCRIPTION
        "The cpeExtMainPseGroup is mandatory for agents
        that support the interface power consumption
        monitoring, or need additional info to identify
        the PSE group."
    ::= { cpeExtMIBCompliances 2 }

cpeExtMIBCompliance3 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for the
        CISCO-POWER-ETHERNET-EXT-MIB."
    MODULE          -- this module
    MANDATORY-GROUPS { cpeExtPsePortGroup }

    GROUP           cpeExtPsePortGlobalConfigGroup
    DESCRIPTION
        "The cpeExtPsePortGlobalConfigGroup is mandatory for agents
        that support global configurations on the PSE interfaces."

    GROUP           cpeExtPsePortPwrMonitorGroup
    DESCRIPTION
        "The cpeExtPsePortPwrMonitorGroup is mandatory for agents
        that provide power monitoring on PD's connected to the
        PSE interfaces."

    GROUP           cpeExtMainPseGroup2
    DESCRIPTION
        "The cpeExtMainPseGroup2 is mandatory for agents
        that need additional information to identify the PSE 
        group."

    GROUP           cpeExtPseGrpPwrGroup
    DESCRIPTION
        "The cpeExtPseGrpPwrGroup is mandatory for agents
        that support the power consumption monitoring for
        PSE groups."

    GROUP           cpeExtPortEntityIndexGroup
    DESCRIPTION
        "The cpeExtPortEntityIndexGroup is mandatory for agents
        that needs additional info to identify the interfaces 
        of the PSE port."

    GROUP           cpeExtPortPolicingGroup
    DESCRIPTION
        "The cpeExtPortPolicingGroup is mandatory for agents
        that provide power consumption policing for the PSE 
        ports."

    GROUP           cpeExtPdStatsGroup
    DESCRIPTION
        "The cpeExtPdStatsGroup is mandatory for agents
        that provide the statistics information for powered 
        devices."

    GROUP           cpeExtPortPolicingActionGroup
    DESCRIPTION
        "The cpeExtPortPolicingActionGroup is mandatory
        for agents that provide control of the power policing
        action."

    GROUP           cpeExtPortPwrManAllocGroup
    DESCRIPTION
        "The cpeExtPortPolicingActionGroup is mandatory
        for agents that provide manual power allocation."

    GROUP           cpeExtPolicingNotifEnableGroup
    DESCRIPTION
        "The cpeExtPolicingNotifEnableGroup is mandatory for agents
        that provide notifications of power consumption policing
        status for the PSE ports."

    GROUP           cpeExtPolicingNotifGroup
    DESCRIPTION
        "The cpeExtPolicingNotifGroup is mandatory for agents
        that provide notifications of power consumption policing
        status for the PSE ports."
    ::= { cpeExtMIBCompliances 3 }

cpeExtMIBCompliance4 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for the
        CISCO-POWER-ETHERNET-EXT-MIB."
    MODULE          -- this module
    MANDATORY-GROUPS { cpeExtPsePortGroup }

    GROUP           cpeExtPsePortGlobalConfigGroup
    DESCRIPTION
        "The cpeExtPsePortGlobalConfigGroup is mandatory for agents
        that support global configurations on the PSE interfaces."

    GROUP           cpeExtPsePortPwrMonitorGroup
    DESCRIPTION
        "The cpeExtPsePortPwrMonitorGroup is mandatory for agents
        that provide power monitoring on PD's connected to the
        PSE interfaces."

    GROUP           cpeExtMainPseGroup2
    DESCRIPTION
        "The cpeExtMainPseGroup2 is mandatory for agents
        that need additional information to identify the PSE 
        group."

    GROUP           cpeExtPseGrpPwrGroup
    DESCRIPTION
        "The cpeExtPseGrpPwrGroup is mandatory for agents
        that support the power consumption monitoring for
        PSE groups."

    GROUP           cpeExtPortEntityIndexGroup
    DESCRIPTION
        "The cpeExtPortEntityIndexGroup is mandatory for agents
        that needs additional info to identify the interfaces 
        of the PSE port."

    GROUP           cpeExtPortPolicingGroup
    DESCRIPTION
        "The cpeExtPortPolicingGroup is mandatory for agents
        that provide power consumption policing for the PSE 
        ports."

    GROUP           cpeExtPdStatsGroup
    DESCRIPTION
        "The cpeExtPdStatsGroup is mandatory for agents
        that provide the statistics information for powered 
        devices."

    GROUP           cpeExtPortPolicingActionGroup
    DESCRIPTION
        "The cpeExtPortPolicingActionGroup is mandatory
        for agents that provide control of the power policing
        action."

    GROUP           cpeExtPortPwrManAllocGroup
    DESCRIPTION
        "The cpeExtPortPolicingActionGroup is mandatory
        for agents that provide manual power allocation."

    GROUP           cpeExtPolicingNotifEnableGroup
    DESCRIPTION
        "The cpeExtPolicingNotifEnableGroup is mandatory for agents
        that provide notifications of power consumption policing
        status for the PSE ports."

    GROUP           cpeExtPolicingNotifGroup
    DESCRIPTION
        "The cpeExtPolicingNotifGroup is mandatory for agents
        that provide notifications of power consumption policing
        status for the PSE ports."

    GROUP           cpeExtPowerPriorityGroup
    DESCRIPTION
        "The cpeExtPowerPriorityGroup is mandatory for agents
        that support global control of the power priority
        feature."

    GROUP           cpeExtPsePortLldpGroup
    DESCRIPTION
        "The cpeExtPsePortLldpGroup is mandatory for agents
        that support the LLDP based Data Link Layer
        power classification."

    GROUP           cpeExtPsePortCapabilitiesGroup
    DESCRIPTION
        "The cpeExtPsePortCapabilitiesGroup is mandatory for agents
        that support PSE port capabilities."

    OBJECT          cpeExtPsePortEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPwrMax
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPolicingEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPolicingAction
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPwrManAlloc
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPolicingNotifEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPowerPriorityEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."
    ::= { cpeExtMIBCompliances 4 }

cpeExtMIBCompliance5 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for the
        CISCO-POWER-ETHERNET-EXT-MIB."
    MODULE          -- this module
    MANDATORY-GROUPS { cpeExtPsePortGroup }

    GROUP           cpeExtPsePortGlobalConfigGroup
    DESCRIPTION
        "The cpeExtPsePortGlobalConfigGroup is mandatory for agents
        that support global configurations on the PSE interfaces."

    GROUP           cpeExtPsePortPwrMonitorGroup
    DESCRIPTION
        "The cpeExtPsePortPwrMonitorGroup is mandatory for agents
        that provide power monitoring on PD's connected to the
        PSE interfaces."

    GROUP           cpeExtMainPseGroup2
    DESCRIPTION
        "The cpeExtMainPseGroup2 is mandatory for agents
        that need additional information to identify the PSE 
        group."

    GROUP           cpeExtPseGrpPwrGroup
    DESCRIPTION
        "The cpeExtPseGrpPwrGroup is mandatory for agents
        that support the power consumption monitoring for
        PSE groups."

    GROUP           cpeExtPortEntityIndexGroup
    DESCRIPTION
        "The cpeExtPortEntityIndexGroup is mandatory for agents
        that needs additional info to identify the interfaces 
        of the PSE port."

    GROUP           cpeExtPortPolicingGroup
    DESCRIPTION
        "The cpeExtPortPolicingGroup is mandatory for agents
        that provide power consumption policing for the PSE 
        ports."

    GROUP           cpeExtPdStatsGroup
    DESCRIPTION
        "The cpeExtPdStatsGroup is mandatory for agents
        that provide the statistics information for powered 
        devices."

    GROUP           cpeExtPortPolicingActionGroup
    DESCRIPTION
        "The cpeExtPortPolicingActionGroup is mandatory
        for agents that provide control of the power policing
        action."

    GROUP           cpeExtPortPwrManAllocGroup
    DESCRIPTION
        "The cpeExtPortPolicingActionGroup is mandatory
        for agents that provide manual power allocation."

    GROUP           cpeExtPolicingNotifEnableGroup
    DESCRIPTION
        "The cpeExtPolicingNotifEnableGroup is mandatory for agents
        that provide notifications of power consumption policing
        status for the PSE ports."

    GROUP           cpeExtPolicingNotifGroup
    DESCRIPTION
        "The cpeExtPolicingNotifGroup is mandatory for agents
        that provide notifications of power consumption policing
        status for the PSE ports."

    GROUP           cpeExtPowerPriorityGroup
    DESCRIPTION
        "The cpeExtPowerPriorityGroup is mandatory for agents
        that support global control of the power priority
        feature."

    GROUP           cpeExtPsePortLldpGroup
    DESCRIPTION
        "The cpeExtPsePortLldpGroup is mandatory for agents
        that support the LLDP based Data Link Layer
        power classification."

    GROUP           cpeExtPsePortCapabilitiesGroup
    DESCRIPTION
        "The cpeExtPsePortCapabilitiesGroup is mandatory for agents
        that support PSE port capabilities."

    GROUP           cpeExtPsePortLldpPowerGroup
    DESCRIPTION
        "The cpeExtPsePortLldpPowerGroup is mandatory for agents
        that support Power via MDI TLV in LLDP protocol."

    OBJECT          cpeExtPsePortEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPwrMax
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPolicingEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPolicingAction
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPwrManAlloc
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPolicingNotifEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPowerPriorityEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."
    ::= { cpeExtMIBCompliances 5 }

cpeExtMIBCompliance6 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "The compliance statement for the
        CISCO-POWER-ETHERNET-EXT-MIB."
    MODULE          -- this module
    MANDATORY-GROUPS { cpeExtPsePortGroup }

    GROUP           cpeExtPsePortGlobalConfigGroup
    DESCRIPTION
        "The cpeExtPsePortGlobalConfigGroup is mandatory for agents
        that support global configurations on the PSE interfaces."

    GROUP           cpeExtPsePortPwrMonitorGroup
    DESCRIPTION
        "The cpeExtPsePortPwrMonitorGroup is mandatory for agents
        that provide power monitoring on PD's connected to the
        PSE interfaces."

    GROUP           cpeExtMainPseGroup2
    DESCRIPTION
        "The cpeExtMainPseGroup2 is mandatory for agents
        that need additional information to identify the PSE 
        group."

    GROUP           cpeExtPseGrpPwrGroup
    DESCRIPTION
        "The cpeExtPseGrpPwrGroup is mandatory for agents
        that support the power consumption monitoring for
        PSE groups."

    GROUP           cpeExtPortEntityIndexGroup
    DESCRIPTION
        "The cpeExtPortEntityIndexGroup is mandatory for agents
        that needs additional info to identify the interfaces 
        of the PSE port."

    GROUP           cpeExtPortPolicingGroup
    DESCRIPTION
        "The cpeExtPortPolicingGroup is mandatory for agents
        that provide power consumption policing for the PSE 
        ports."

    GROUP           cpeExtPdStatsGroup
    DESCRIPTION
        "The cpeExtPdStatsGroup is mandatory for agents
        that provide the statistics information for powered 
        devices."

    GROUP           cpeExtPortPolicingActionGroup
    DESCRIPTION
        "The cpeExtPortPolicingActionGroup is mandatory
        for agents that provide control of the power policing
        action."

    GROUP           cpeExtPortPwrManAllocGroup
    DESCRIPTION
        "The cpeExtPortPolicingActionGroup is mandatory
        for agents that provide manual power allocation."

    GROUP           cpeExtPolicingNotifEnableGroup
    DESCRIPTION
        "The cpeExtPolicingNotifEnableGroup is mandatory for agents
        that provide notifications of power consumption policing
        status for the PSE ports."

    GROUP           cpeExtPolicingNotifGroup
    DESCRIPTION
        "The cpeExtPolicingNotifGroup is mandatory for agents
        that provide notifications of power consumption policing
        status for the PSE ports."

    GROUP           cpeExtPowerPriorityGroup
    DESCRIPTION
        "The cpeExtPowerPriorityGroup is mandatory for agents
        that support global control of the power priority
        feature."

    GROUP           cpeExtPsePortLldpGroup
    DESCRIPTION
        "The cpeExtPsePortLldpGroup is mandatory for agents
        that support the LLDP based Data Link Layer
        power classification."

    GROUP           cpeExtPsePortCapabilitiesGroup
    DESCRIPTION
        "The cpeExtPsePortCapabilitiesGroup is mandatory for agents
        that support PSE port capabilities."

    GROUP           cpeExtPsePortLldpPowerGroup
    DESCRIPTION
        "The cpeExtPsePortLldpPowerGroup is mandatory for agents
        that support Power via MDI TLV in LLDP protocol."

    GROUP           cpeExtPseInfoPwrGroup
    DESCRIPTION
        "The cpeExtPseInfoPwrGroup is mandatory for agents
        that support used and remaining power info for PSE groups."

    OBJECT          cpeExtPsePortEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPwrMax
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPolicingEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPolicingAction
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPsePortPwrManAlloc
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPolicingNotifEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."

    OBJECT          cpeExtPowerPriorityEnable
    MIN-ACCESS      read-only
    DESCRIPTION
        "Write access is not required."
    ::= { cpeExtMIBCompliances 6 }

-- Units of Conformance

cpeExtPsePortGroup OBJECT-GROUP
    OBJECTS         {
                        cpeExtPsePortEnable,
                        cpeExtPsePortDiscoverMode,
                        cpeExtPsePortDeviceDetected,
                        cpeExtPsePortIeeePd,
                        cpeExtPsePortAdditionalStatus,
                        cpeExtPsePortPwrMax,
                        cpeExtPsePortPwrAllocated,
                        cpeExtPsePortPwrAvailable,
                        cpeExtPsePortPwrConsumption
                    }
    STATUS          current
    DESCRIPTION
        "This group provides information and configuration objects
        in addition to those provided in the POWER-ETHERNET-MIB
        (RFC3621)."
    ::= { cpeExtMIBGroups 1 }

cpeExtPsePortGlobalConfigGroup OBJECT-GROUP
    OBJECTS         { cpeExtDefaultAllocation }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide global
        configuration of the PSE interfaces."
    ::= { cpeExtMIBGroups 2 }

cpeExtPsePortPwrMonitorGroup OBJECT-GROUP
    OBJECTS         { cpeExtPsePortMaxPwrDrawn }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide power
        monitoring on PD's connected to the PSE interfaces."
    ::= { cpeExtMIBGroups 3 }

cpeExtMainPseGroup OBJECT-GROUP
    OBJECTS         {
                        cpeExtMainPseEntPhyIndex,
                        cpeExtMainPseDescr,
                        cpeExtMainPsePwrMonitorCapable
                    }
    STATUS          deprecated
    DESCRIPTION
        "This is a collection of objects which provide
        additional information for the PSE group.
        cpeExtMainPseGroup object is superseded by cpeExtMainPseGroup2,
        and cpeExtPseGrpPwrGroup."
    ::= { cpeExtMIBGroups 4 }

cpeExtPortEntityIndexGroup OBJECT-GROUP
    OBJECTS         { cpeExtPsePortEntPhyIndex }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide
        entity physical index information for PSE port."
    ::= { cpeExtMIBGroups 5 }

cpeExtPortPolicingGroup OBJECT-GROUP
    OBJECTS         {
                        cpeExtPsePortPolicingCapable,
                        cpeExtPsePortPolicingEnable
                    }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide
        the hardware power consumption policing information 
        for PSE port."
    ::= { cpeExtMIBGroups 6 }

cpeExtPdStatsGroup OBJECT-GROUP
    OBJECTS         {
                        cpeExtPdStatsTotalDevices,
                        cpeExtPdStatsDeviceCount
                    }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide
        the statistics information for powered devices."
    ::= { cpeExtMIBGroups 7 }

cpeExtMainPseGroup2 OBJECT-GROUP
    OBJECTS         {
                        cpeExtMainPseEntPhyIndex,
                        cpeExtMainPseDescr
                    }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide
        additional information to identify the PSE group."
    ::= { cpeExtMIBGroups 8 }

cpeExtPseGrpPwrGroup OBJECT-GROUP
    OBJECTS         { cpeExtMainPsePwrMonitorCapable }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide
        power monitoring information for the PSE group."
    ::= { cpeExtMIBGroups 9 }

cpeExtPortPolicingActionGroup OBJECT-GROUP
    OBJECTS         { cpeExtPsePortPolicingAction }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide control
        of the power policing action of the PSE port."
    ::= { cpeExtMIBGroups 10 }

cpeExtPortPwrManAllocGroup OBJECT-GROUP
    OBJECTS         { cpeExtPsePortPwrManAlloc }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide manual
        power allocation for the PSE port."
    ::= { cpeExtMIBGroups 11 }

cpeExtPolicingNotifEnableGroup OBJECT-GROUP
    OBJECTS         { cpeExtPolicingNotifEnable }
    STATUS          current
    DESCRIPTION
        "A collection of object that provides control over
        power consumption policing status notification."
    ::= { cpeExtMIBGroups 12 }

cpeExtPolicingNotifGroup NOTIFICATION-GROUP
   NOTIFICATIONS    { cpeExtPolicingNotif }
    STATUS          current
    DESCRIPTION
        "This is a collection of notifications related to
        power consumption policing information for PSE ports."
    ::= { cpeExtMIBGroups 13 }

cpeExtPowerPriorityGroup OBJECT-GROUP
    OBJECTS         { cpeExtPowerPriorityEnable }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides global
        control of power priority feature."
    ::= { cpeExtMIBGroups 14 }

cpeExtPsePortLldpGroup OBJECT-GROUP
    OBJECTS         {
                        cpeExtPsePortLldpPwrType,
                        cpeExtPsePortLldpPdPwrType,
                        cpeExtPsePortLldpPwrSrc,
                        cpeExtPsePortLldpPdPwrSrc,
                        cpeExtPsePortLldpPwrPriority,
                        cpeExtPsePortLldpPdPwrPriority,
                        cpeExtPsePortLldpPwrReq,
                        cpeExtPsePortLldpPdPwrReq,
                        cpeExtPsePortLldpPwrAlloc,
                        cpeExtPsePortLldpPdPwrAlloc
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides the
        information about the LLDP based Data Link Layer 
        power classification characteristics of power Ethernet 
        PSE ports."
    ::= { cpeExtMIBGroups 15 }

cpeExtPsePortCapabilitiesGroup OBJECT-GROUP
    OBJECTS         { cpeExtPsePortCapabilities }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides PSE
        port capabilities."
    ::= { cpeExtMIBGroups 16 }

cpeExtPsePortLldpPowerGroup OBJECT-GROUP
    OBJECTS         {
                        cpeExtPsePortLldpPwrClass,
                        cpeExtPsePortLldpPdPwrClass,
                        cpeExtPsePortLldpPdPwrSupport,
                        cpeExtPsePortLldpPdPwrPairsOrZero
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provide Power information
        via MDI TLV in LLDP Protocol."
    ::= { cpeExtMIBGroups 17 }

cpeExtPseInfoPwrGroup OBJECT-GROUP
    OBJECTS         {
                        cpeExtMainPseUsedPower,
                        cpeExtMainPseRemainingPower
                    }
    STATUS          current
    DESCRIPTION
        "This is a collection of objects which provide
        used and remaining power information for the PSE group."
    ::= { cpeExtMIBGroups 18 }

END