path: root/MIBS/ciena/CIENA-WWP-LEOS-PORT-XCVR-MIB

WWP-LEOS-PORT-XCVR-MIB DEFINITIONS ::= BEGIN

	IMPORTS
		enterprises, Unsigned32, MODULE-IDENTITY,
		NOTIFICATION-TYPE
			FROM SNMPv2-SMI
		DisplayString, TruthValue, TEXTUAL-CONVENTION
			FROM SNMPv2-TC
		wwpModulesLeos
			FROM WWP-SMI;

--
-- Node definitions
--
	-- 1.3.6.1.4.1.6141.2.60.4
	wwpLeosPortXcvrMIB MODULE-IDENTITY
		LAST-UPDATED "201305310000Z"		-- May 31, 2013 at 00:00 GMT (201305310000Z)
		ORGANIZATION
			"Ciena, Inc"
		CONTACT-INFO
			"   Mib Meister
			115 North Sullivan Road
			Spokane Valley, WA 99037
			   	USA		 		
			   	Phone:  +1 509 242 9000
			Email:  support@ciena.com"
		DESCRIPTION
			"The MIB module for the WWP System physical transceiver devices."
		REVISION "201305310000Z"		-- May 31, 2013 at 00:00 GMT (201305310000Z)
		DESCRIPTION
			"Deprecate wwpLeosPortXcvrAdminState as it is no longer supported."
		REVISION "201304230000Z"		-- April 23, 2013 at 00:00 GMT (201304230000Z)
		DESCRIPTION
			"Corrected Units changed watts to uW in descriptions."
		REVISION "201107060000Z"		-- July 6, 2011 at 00:00 GMT (201107060000Z)
		DESCRIPTION
			"Miscellaneous spelling and description corrections."
		REVISION "201105240000Z"		-- May 24, 2011 at 00:00 GMT (201105240000Z)
		DESCRIPTION
			"Added XFP objects. "
		REVISION "201103080000Z"		-- March 8, 2011 at 00:00 GMT (201103080000Z)
		DESCRIPTION
			"wwpLeosPortXcvrEventType object does not support the enumerations for
			'disabled' and 'enabled' as the backend does not support it ."
		REVISION "201002010000Z"		-- February 1, 2010 at 00:00 GMT (201002010000Z)
		DESCRIPTION
			"Added wwpLeosPortXcvrAdminFrequency, wwpLeosPortXcvrXfpLaserFirstFrequency,
			wwpLeosPortXcvrXfpLaserLastFrquency, wwpLeosPortXcvrXfpMaxGridScacing,
			wwpLeosPortXcvrXfpChannelNum, wwpLeosPortXcvrXfpFrequencyError"
		REVISION "200603150000Z"		-- March 15, 2006 at 00:00 GMT (200603150000Z)
		DESCRIPTION
			"Added notification wwpLeosPortXcvrSpeedInfoMissingNotification."
		REVISION "200104031700Z"		-- April 3, 2001 at 17:00 GMT (200104031700Z)
		DESCRIPTION
			"Initial creation."
	::= { wwpModulesLeos 4 }

	-- 1.3.6.1.4.1.6141.2.60.4.1
	wwpLeosPortXcvrMIBObjects OBJECT IDENTIFIER ::= { wwpLeosPortXcvrMIB 1 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1
	wwpLeosPortXcvr OBJECT IDENTIFIER ::= { wwpLeosPortXcvrMIBObjects 1 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1
	wwpLeosPortXcvrTable OBJECT-TYPE
		SYNTAX SEQUENCE OF WwpLeosPortXcvrEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"This table contains descriptions and settings for each of the 
			physical transceiver devices."
	::= { wwpLeosPortXcvr 1 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1
	wwpLeosPortXcvrEntry OBJECT-TYPE
		SYNTAX WwpLeosPortXcvrEntry
		ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The Transceiver Device Entry."
		INDEX { wwpLeosPortXcvrId } 
	::= { wwpLeosPortXcvrTable 1 }


	WwpLeosPortXcvrEntry ::= SEQUENCE
		{
		wwpLeosPortXcvrId Integer32,
		wwpLeosPortXcvrOperState INTEGER,
		wwpLeosPortXcvrIdentiferType INTEGER,
		wwpLeosPortXcvrExtIdentiferType INTEGER,
		wwpLeosPortXcvrConnectorType Integer32,
		wwpLeosPortXcvrType Integer32,
		wwpLeosPortXcvrVendorName DisplayString,
		wwpLeosPortXcvrVendorOUI OCTET STRING,
		wwpLeosPortXcvrVendorPN DisplayString,
		wwpLeosPortXcvrRevNum DisplayString,
		wwpLeosPortXcvrSerialNum DisplayString,
		wwpLeosPortXcvrEncodingType Integer32,
		wwpLeosPortXcvrMfgDate DisplayString,
		wwpLeosPortXcvrComplianceVer Integer32,
		wwpLeosPortXcvrWaveLength Integer32,
		wwpLeosPortXcvrTemperature Integer32,
		wwpLeosPortXcvrVcc Integer32,
		wwpLeosPortXcvrBias Integer32,
		wwpLeosPortXcvrRxPower Integer32,
		wwpLeosPortXcvrTxState INTEGER,
		wwpLeosPortXcvrTxFaultStatus INTEGER,
		wwpLeosPortXcvrRxRateStatus INTEGER,
		wwpLeosPortXcvr9by125um Integer32,
		wwpLeosPortXcvr50by125um Integer32,
		wwpLeosPortXcvr62dot5by125um Integer32,
		wwpLeosPortXcvrCu Integer32,
		wwpLeosPortXcvrTxOutputPw Integer32,
		wwpLeosPortXcvrLosState TruthValue,
		wwpLeosPortXcvrDiagSupported TruthValue,
		wwpLeosPortXcvrEnhDiagAlarmSupported TruthValue,
		wwpLeosPortXcvrEnhDiagSoftTxDisableSupported TruthValue,
		wwpLeosPortXcvrEnhDiagSoftTxFaultSupported TruthValue,
		wwpLeosPortXcvrEnhDiagRxLosSupported TruthValue,
		wwpLeosPortXcvrHighTempAlarmThreshold Integer32,
		wwpLeosPortXcvrLowTempAlarmThreshold Integer32,
		wwpLeosPortXcvrHighVccAlarmThreshold Integer32,
		wwpLeosPortXcvrLowVccAlarmThreshold Integer32,
		wwpLeosPortXcvrHighBiasAlarmThreshold Integer32,
		wwpLeosPortXcvrLowBiasAlarmThreshold Integer32,
		wwpLeosPortXcvrHighTxPwAlarmThreshold Integer32,
		wwpLeosPortXcvrLowTxPwAlarmThreshold Integer32,
		wwpLeosPortXcvrHighRxPwAlarmThreshold Integer32,
		wwpLeosPortXcvrLowRxPwAlarmThreshold Integer32,
		wwpLeosPortXcvrEnhDiagRateSelectSupported TruthValue,
		wwpLeosPortXcvrAdminState INTEGER,
		wwpLeosPortXcvrXfpMinBitRate Integer32,
		wwpLeosPortXcvrXfpMaxBitRate Integer32,
		wwpLeosPortXcvrXfpLinkLenSmf1km Integer32,
		wwpLeosPortXcvrXfpLinkLenE50u2m Integer32,
		wwpLeosPortXcvrXfpLinkLen50u1m Integer32,
		wwpLeosPortXcvrXfpLinkLen62dot5u1m Integer32,
		wwpLeosPortXcvrXfpLinkLenCopper1m Integer32,
		wwpLeosPortXcvrXfpDevTech INTEGER,
		wwpLeosPortXcvrXfpTransmitterTech Integer32,
		wwpLeosPortXcvrXfpCdrSupport Integer32,
		wwpLeosPortXcvrXfpWaveLengthTol Integer32,
		wwpLeosPortXcvrXfpMaxCaseTemp Integer32,
		wwpLeosPortXcvrXfpMaxPower Integer32,
		wwpLeosPortXcvrXfpMax5vCurrent Integer32,
		wwpLeosPortXcvrXfpMax3p3vCurrent Integer32,
		wwpLeosPortXcvrXfpMax1p8vCurrent Integer32,
		wwpLeosPortXcvrXfpMaxNeg5p2vCurrent Integer32,
		wwpLeosPortXcvrXfpDiagMonitorType Integer32,
		wwpLeosPortXcvrXfpEnhancedOptions Integer32,
		wwpLeosPortXcvrXfpAuxMonitoringInput1 INTEGER,
		wwpLeosPortXcvrXfpAuxMonitoringInput2 INTEGER,
		wwpLeosPortXcvrAdminFrequency Unsigned32,
		wwpLeosPortXcvrXfpLaserFirstFrequency Unsigned32,
		wwpLeosPortXcvrXfpLaserLastFrquency Unsigned32,
		wwpLeosPortXcvrXfpMaxGridScacing Integer32,
		wwpLeosPortXcvrXfpChannelNum Integer32,
		wwpLeosPortXcvrXfpFrequencyError Integer32,
		wwpLeosPortXcvrAdminWavelength Unsigned32,
		wwpLeosPortXcvrAdminChannel Unsigned32,
		wwpLeosPortXcvrXfpLaserFirstWavelenth Unsigned32,
		wwpLeosPortXcvrXfpLaserLastWavelength Unsigned32,
		wwpLeosPortXcvrXfpLaserFirstChannel Unsigned32,
		wwpLeosPortXcvrXfpLaserLastChannel Unsigned32,
		wwpLeosPortXcvrOperFrequency Unsigned32,
		wwpLeosPortXcvrOperWavelength Unsigned32,
		wwpLeosPortXcvrRxDbmPower Integer32,
		wwpLeosPortXcvrTxDbmPower Integer32,
		wwpLeosPortXcvrHighTxDbmPwAlarmThreshold Integer32,
		wwpLeosPortXcvrLowTxDbmPwAlarmThreshold Integer32,
		wwpLeosPortXcvrHighRxDbmPwAlarmThreshold Integer32,
		wwpLeosPortXcvrLowRxDbmPwAlarmThreshold Integer32
		}

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.1
	wwpLeosPortXcvrId OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The ID for the transceiver."
	::= { wwpLeosPortXcvrEntry 1 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.2
	wwpLeosPortXcvrOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2),
			loopback(3),
			notPresent(4),
			faulted(5)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The operational state of the transceiver."
	::= { wwpLeosPortXcvrEntry 2 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.3
	wwpLeosPortXcvrIdentiferType OBJECT-TYPE
		SYNTAX INTEGER
		{
			unknown(1),
			gbic(2),
			solderedType(3),
			sfp(4),
			reserved(5),
			vendorSpecific(6),
			xbi(7),
			xenpak(8),
			xfp(9),
			xff(10),
			xfpe(11),
			xpak(12),
			x2(13)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Type for the transceiver."
	::= { wwpLeosPortXcvrEntry 3 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.4
	wwpLeosPortXcvrExtIdentiferType OBJECT-TYPE
		SYNTAX INTEGER
		{
			unknown(1),
			sfp-gbic(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Extended identifier type for this transceiver."
	::= { wwpLeosPortXcvrEntry 4 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5
	wwpLeosPortXcvrConnectorType OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Type of connector.
			unknown(1),
			sc(2),
			fiberChannelStyle1(3),
			fiberChannelStyle2(4),
			bnc/tnc(5),
			coaxialHeader(6),
			fiberJack(7),
			lc(8),
			mt-rj(9),
			mu(10),
			sg(11),
			opticalPitTail(12),
			reserved(13..32),
			hssdc(33),
			copperPitTail(34),
			reserved(35..128),
			vendorSpecific(129..256)."
	::= { wwpLeosPortXcvrEntry 5 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.6
	wwpLeosPortXcvrType OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Type of Transceiver."
	::= { wwpLeosPortXcvrEntry 6 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.7
	wwpLeosPortXcvrVendorName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"String containing this transceiver's vendor name."
	::= { wwpLeosPortXcvrEntry 7 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.8
	wwpLeosPortXcvrVendorOUI OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE (0..255))
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"String containing this transceiver's vendor OUI."
	::= { wwpLeosPortXcvrEntry 8 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.9
	wwpLeosPortXcvrVendorPN OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"String containing this transceiver's vendor OUI."
	::= { wwpLeosPortXcvrEntry 9 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.10
	wwpLeosPortXcvrRevNum OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"String containing this transceiver's part revision number."
	::= { wwpLeosPortXcvrEntry 10 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.11
	wwpLeosPortXcvrSerialNum OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"String containing this transceiver's part serial number."
	::= { wwpLeosPortXcvrEntry 11 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.12
	wwpLeosPortXcvrEncodingType OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"If wwpLeosPortXcvrIdentiferType is SFP, the following values are defined for the encoding type:
			unspecified(1),
			8B10B(2),
			4b5b(3),
			NRZ(4),
			Manchester(5),
			SONET(6),
			reserved(7-256)
			If wwpLeosPortXcvrIdentiferType is XFP, the following values are defined for the encoding type:
			Bit 7:  64B/66B (yes/no)
			Bit 6:  8B10B   (yes/no)
			Bit 5:  Sonet Scrambled (yes/no)
			Bit 4:  NRZ (yes/no)
			Bit 3:  RZ (yes/no)
			Bit 2:  Tx Dither Support (yes/no) 
			Bit 1:  Reserved 
			Bit 0:  Reserved
			Multiple bits can be set at once in the case of XFP.
			For instance, to indicate support for NRZ(4) and Sonet scrambled (5),
			the user sees this object with the value of 16 + 32 = 48"
	::= { wwpLeosPortXcvrEntry 12 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.13
	wwpLeosPortXcvrMfgDate OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"String containing the transceiver manufacture date."
	::= { wwpLeosPortXcvrEntry 13 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.14
	wwpLeosPortXcvrComplianceVer OBJECT-TYPE
		SYNTAX Integer32 (1..4)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the compliance version.
			Value 1 means digital diagnostic functionality 
			not included or undefined
			Value 2 means includes functionality defined in 
			Rev 9.0 SFF-8472
			Value 3 means TBD
			Value 4 means TBD."
	::= { wwpLeosPortXcvrEntry 14 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.15
	wwpLeosPortXcvrWaveLength OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the wavelength of the transceiver. Units are nano meter."
	::= { wwpLeosPortXcvrEntry 15 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16
	wwpLeosPortXcvrTemperature OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		UNITS
			"centigrade"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the temperature of the transceiver. Units are in degrees C "
	::= { wwpLeosPortXcvrEntry 16 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17
	wwpLeosPortXcvrVcc OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the voltage of the transceiver."
	::= { wwpLeosPortXcvrEntry 17 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.18
	wwpLeosPortXcvrBias OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the bias of the transceiver."
	::= { wwpLeosPortXcvrEntry 18 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.19
	wwpLeosPortXcvrRxPower OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		UNITS
			"uW"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the measured receive power of the transceiver. 
			Units are micro Watts."
	::= { wwpLeosPortXcvrEntry 19 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.20
	wwpLeosPortXcvrTxState OBJECT-TYPE
		SYNTAX INTEGER
		{
			enabled(1),
			disabled(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates whether this transceiver is currently set to transmit."
	::= { wwpLeosPortXcvrEntry 20 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.21
	wwpLeosPortXcvrTxFaultStatus OBJECT-TYPE
		SYNTAX INTEGER
		{
			fault(1),
			noFault(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the fault status of this transceiver."
	::= { wwpLeosPortXcvrEntry 21 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.22
	wwpLeosPortXcvrRxRateStatus OBJECT-TYPE
		SYNTAX INTEGER
		{
			enabled(1),
			disabled(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the Rx rate status of this transceiver."
	::= { wwpLeosPortXcvrEntry 22 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.23
	wwpLeosPortXcvr9by125um OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the link length for 9/125um fiber."
	::= { wwpLeosPortXcvrEntry 23 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.24
	wwpLeosPortXcvr50by125um OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the link length for 50/125um fiber."
	::= { wwpLeosPortXcvrEntry 24 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.25
	wwpLeosPortXcvr62dot5by125um OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the link length for 62.5/125um fiber."
	::= { wwpLeosPortXcvrEntry 25 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.26
	wwpLeosPortXcvrCu OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the link length for copper."
	::= { wwpLeosPortXcvrEntry 26 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.27
	wwpLeosPortXcvrTxOutputPw OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		UNITS
			"uW"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the Tx Output power for the transceiver.
			Units are micro Watts."
	::= { wwpLeosPortXcvrEntry 27 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.28
	wwpLeosPortXcvrLosState OBJECT-TYPE
		SYNTAX TruthValue
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the Loss Of Signal State for the optical transceiver.
			Ports without optical transceiver will always report 'false'."
	::= { wwpLeosPortXcvrEntry 28 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.29
	wwpLeosPortXcvrDiagSupported OBJECT-TYPE
		SYNTAX TruthValue
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates if diagnostics are supported on this transceiver."
	::= { wwpLeosPortXcvrEntry 29 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.30
	wwpLeosPortXcvrEnhDiagAlarmSupported OBJECT-TYPE
		SYNTAX TruthValue
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates if enhanced diagnostics alarms / warnings implemented."
	::= { wwpLeosPortXcvrEntry 30 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.31
	wwpLeosPortXcvrEnhDiagSoftTxDisableSupported OBJECT-TYPE
		SYNTAX TruthValue
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates if enhanced diagnostics soft Tx disable control is implemented."
	::= { wwpLeosPortXcvrEntry 31 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.32
	wwpLeosPortXcvrEnhDiagSoftTxFaultSupported OBJECT-TYPE
		SYNTAX TruthValue
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates if enhanced diagnostics soft Tx fault monitoring is implemented."
	::= { wwpLeosPortXcvrEntry 32 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.33
	wwpLeosPortXcvrEnhDiagRxLosSupported OBJECT-TYPE
		SYNTAX TruthValue
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates if enhanced diagnostics Rx LOS monitoring is implemented."
	::= { wwpLeosPortXcvrEntry 33 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.34
	wwpLeosPortXcvrHighTempAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the higher threshold for temperature alarm."
	::= { wwpLeosPortXcvrEntry 34 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.35
	wwpLeosPortXcvrLowTempAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the lower threshold for temperature alarm."
	::= { wwpLeosPortXcvrEntry 35 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.36
	wwpLeosPortXcvrHighVccAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the higher threshold for voltage alarm."
	::= { wwpLeosPortXcvrEntry 36 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.37
	wwpLeosPortXcvrLowVccAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the lower threshold for voltage alarm."
	::= { wwpLeosPortXcvrEntry 37 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.38
	wwpLeosPortXcvrHighBiasAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the higher threshold for bias alarm."
	::= { wwpLeosPortXcvrEntry 38 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.39
	wwpLeosPortXcvrLowBiasAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the lower threshold for bias alarm."
	::= { wwpLeosPortXcvrEntry 39 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.40
	wwpLeosPortXcvrHighTxPwAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"uW"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the higher threshold for Tx power alarm.
			Units are micro watts"
	::= { wwpLeosPortXcvrEntry 40 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.41
	wwpLeosPortXcvrLowTxPwAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"uW"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the lower threshold for Tx power alarm.
			Units are micro watts."
	::= { wwpLeosPortXcvrEntry 41 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.42
	wwpLeosPortXcvrHighRxPwAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"uW"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the higher threshold for Rx power alarm.
			Units are micro watts."
	::= { wwpLeosPortXcvrEntry 42 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.43
	wwpLeosPortXcvrLowRxPwAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"uW"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the lower threshold for Rx power alarm.
			Units are micro watts."
	::= { wwpLeosPortXcvrEntry 43 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.44
	wwpLeosPortXcvrEnhDiagRateSelectSupported OBJECT-TYPE
		SYNTAX TruthValue
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates if enhanced diagnostics soft rate select control is implemented."
	::= { wwpLeosPortXcvrEntry 44 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.45
	wwpLeosPortXcvrAdminState OBJECT-TYPE
		SYNTAX INTEGER
		{
			disabled(1),
			enabled(2),
			loopback(3)
		}
		ACCESS read-write
		STATUS deprecated
		DESCRIPTION
			"The admin state of the transceiver."
	::= { wwpLeosPortXcvrEntry 45 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.70
	wwpLeosPortXcvrXfpMinBitRate OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the minimum bit rate."
	::= { wwpLeosPortXcvrEntry 70 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.71
	wwpLeosPortXcvrXfpMaxBitRate OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the maximum bit rate."
	::= { wwpLeosPortXcvrEntry 71 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.72
	wwpLeosPortXcvrXfpLinkLenSmf1km OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the length (SMF fiber) 1km."
	::= { wwpLeosPortXcvrEntry 72 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.73
	wwpLeosPortXcvrXfpLinkLenE50u2m OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the length (ext. BW MMF) 2m."
	::= { wwpLeosPortXcvrEntry 73 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.74
	wwpLeosPortXcvrXfpLinkLen50u1m OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the length (50um) 1m."
	::= { wwpLeosPortXcvrEntry 74 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.75
	wwpLeosPortXcvrXfpLinkLen62dot5u1m OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the length (62.5um) 1m."
	::= { wwpLeosPortXcvrEntry 75 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.76
	wwpLeosPortXcvrXfpLinkLenCopper1m OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the length (copper) 1m."
	::= { wwpLeosPortXcvrEntry 76 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.77
	wwpLeosPortXcvrXfpDevTech OBJECT-TYPE
		SYNTAX INTEGER
		{
			vcsel850nm(1),
			vcsel1310nm(2),
			vcsel1550nm(3),
			fp1310nm(4),
			dfb1310nm(5),
			dfb1550nm(6),
			eml1310nm(7),
			eml1550nm(8),
			copperOrOther(9),
			tunable1550nm(10),
			reserved(11)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the device technology."
	::= { wwpLeosPortXcvrEntry 77 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.78
	wwpLeosPortXcvrXfpTransmitterTech OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the device transmitter technology:
			Bit 3: Wavelength Control (active/none)
			Bit 2: Transmitter Cooling (cooled/uncooled)
			Bit 1: Detector Type (apd/pin)
			Bit 0: Transmitter Tuning (Tunable/non-Tunable)
			"
	::= { wwpLeosPortXcvrEntry 78 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.79
	wwpLeosPortXcvrXfpCdrSupport OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the CDR support:
			Bit 7:  9.95 Gb/s (yes/no)
			Bit 6:  10.3  Gb/s (yes/no)
			Bit 5:  10.5  Gb/s (yes/no)
			Bit 4:  10.7  Gb/s (yes/no)
			Bit 3:  11.1  Gb/s (yes/no)
			Bit 2:  N/A
			Bit 1:  Lineside Loopback (yes/no)
			Bit 0:  XFI Loopback (yes/no)
			"
	::= { wwpLeosPortXcvrEntry 79 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.80
	wwpLeosPortXcvrXfpWaveLengthTol OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the wavelength tolerance."
	::= { wwpLeosPortXcvrEntry 80 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.81
	wwpLeosPortXcvrXfpMaxCaseTemp OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the maximum case temperature."
	::= { wwpLeosPortXcvrEntry 81 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.82
	wwpLeosPortXcvrXfpMaxPower OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the maximum power dissipation."
	::= { wwpLeosPortXcvrEntry 82 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.83
	wwpLeosPortXcvrXfpMax5vCurrent OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the 5.0 Volt Max Current."
	::= { wwpLeosPortXcvrEntry 83 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.84
	wwpLeosPortXcvrXfpMax3p3vCurrent OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the 3.3 Volt Max Current."
	::= { wwpLeosPortXcvrEntry 84 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.85
	wwpLeosPortXcvrXfpMax1p8vCurrent OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the 1.8 Volt Max Current."
	::= { wwpLeosPortXcvrEntry 85 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.86
	wwpLeosPortXcvrXfpMaxNeg5p2vCurrent OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the -5.2 Volt Max Current."
	::= { wwpLeosPortXcvrEntry 86 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.87
	wwpLeosPortXcvrXfpDiagMonitorType OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the diag monitor type:
			Bit 4 indicates BER support.
			Bit 3 indicates the Rx Power Meas. type of Avg or OMA."
	::= { wwpLeosPortXcvrEntry 87 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.88
	wwpLeosPortXcvrXfpEnhancedOptions OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the enhanced options:
			Bit 7: VPS Support (yes/no)
			Bit 6: Soft TX_DISABLE (yes/no)
			Bit 5: Soft P_down (yes/no)
			Bit 4: VPS LV Regulator Mode (yes/no)
			Bit 3: VPS bypassed Reg. Mode (yes/no)
			Bit 2: Active FEC Ctrl (yes/no)
			Bit 1: Wavelength or frequency Tunability (yes/no)
			Bit 0: CMU Support Mode (yes/no)
			"
	::= { wwpLeosPortXcvrEntry 88 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.89
	wwpLeosPortXcvrXfpAuxMonitoringInput1 OBJECT-TYPE
		SYNTAX INTEGER
		{
			none(1),
			aPDBiasVoltage(2),
			reserved(3),
			tECCurrentMa(4),
			laserTemp(5),
			laserWavelength(6),
			voltage5V(7),
			voltage3p3V(8),
			voltage1p8V(9),
			voltageNeg5p2V(10),
			voltage5VCurrent(11),
			voltage3p3VCurrent(12),
			voltage1p8VCurrent(13),
			voltageNeg5p2VCurrent(14),
			unknown(15)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the Aux monitoring of A/D input 1."
	::= { wwpLeosPortXcvrEntry 89 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.90
	wwpLeosPortXcvrXfpAuxMonitoringInput2 OBJECT-TYPE
		SYNTAX INTEGER
		{
			none(1),
			aPDBiasVoltage(2),
			reserved(3),
			tECCurrentMa(4),
			laserTemp(5),
			laserWavelength(6),
			voltage5V(7),
			voltage3p3V(8),
			voltage1p8V(9),
			voltageNeg5p2V(10),
			voltage5VCurrent(11),
			voltage3p3VCurrent(12),
			voltage1p8VCurrent(13),
			voltageNeg5p2VCurrent(14),
			unknown(15)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the Aux monitoring of A/D input 2."
	::= { wwpLeosPortXcvrEntry 90 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.91
	wwpLeosPortXcvrAdminFrequency OBJECT-TYPE
		SYNTAX Unsigned32 (0..-1)
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The administrative frequency of the transceiver in GHz."
	::= { wwpLeosPortXcvrEntry 91 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.92
	wwpLeosPortXcvrXfpLaserFirstFrequency OBJECT-TYPE
		SYNTAX Unsigned32 (0..-1)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the first frequency in GHz."
	::= { wwpLeosPortXcvrEntry 92 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.93
	wwpLeosPortXcvrXfpLaserLastFrquency OBJECT-TYPE
		SYNTAX Unsigned32 (0..-1)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the last frequency in GHz."
	::= { wwpLeosPortXcvrEntry 93 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.94
	wwpLeosPortXcvrXfpMaxGridScacing OBJECT-TYPE
		SYNTAX Integer32 (0..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the maximum support grid spacing in GHz."
	::= { wwpLeosPortXcvrEntry 94 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.95
	wwpLeosPortXcvrXfpChannelNum OBJECT-TYPE
		SYNTAX Integer32 (1..65535)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the channel number."
	::= { wwpLeosPortXcvrEntry 95 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.96
	wwpLeosPortXcvrXfpFrequencyError OBJECT-TYPE
		SYNTAX Integer32 (-32768..32767)
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the frequency error."
	::= { wwpLeosPortXcvrEntry 96 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.97
	wwpLeosPortXcvrAdminWavelength OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The administrative wavelength of the transceiver in picometers."
	::= { wwpLeosPortXcvrEntry 97 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.98
	wwpLeosPortXcvrAdminChannel OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS read-write
		STATUS current
		DESCRIPTION
			"The administrative channel number of the transceiver."
	::= { wwpLeosPortXcvrEntry 98 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.99
	wwpLeosPortXcvrXfpLaserFirstWavelenth OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the first wavelength in picometers."
	::= { wwpLeosPortXcvrEntry 99 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.100
	wwpLeosPortXcvrXfpLaserLastWavelength OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the last wavelength in picometers."
	::= { wwpLeosPortXcvrEntry 100 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.101
	wwpLeosPortXcvrXfpLaserFirstChannel OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the first channel number."
	::= { wwpLeosPortXcvrEntry 101 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.102
	wwpLeosPortXcvrXfpLaserLastChannel OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"This represents the last channel number."
	::= { wwpLeosPortXcvrEntry 102 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.103
	wwpLeosPortXcvrOperFrequency OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The operational frequency  of the transceiver in GHz."
	::= { wwpLeosPortXcvrEntry 103 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.104
	wwpLeosPortXcvrOperWavelength OBJECT-TYPE
		SYNTAX Unsigned32
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"The operational wavelength of the transceiver in picometers."
	::= { wwpLeosPortXcvrEntry 104 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105
	wwpLeosPortXcvrRxDbmPower OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"dBm"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the Rx power level in dBm after scaling and conversion to an integer.
			To convert back to dBm, convert this value to floating point and divide by 10,000."
	::= { wwpLeosPortXcvrEntry 105 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106
	wwpLeosPortXcvrTxDbmPower OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"dBm"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the Tx power level in dBm after scaling and conversion to an integer.
			To convert back to dBm, convert this value to floating point and divide by 10,000."
	::= { wwpLeosPortXcvrEntry 106 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.107
	wwpLeosPortXcvrHighTxDbmPwAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"dBm"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the higher threshold for Tx power alarm in dBm after scaling and conversion to an integer.
			To convert back to dBm, convert this value to floating point and divide by 10,000."
	::= { wwpLeosPortXcvrEntry 107 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.108
	wwpLeosPortXcvrLowTxDbmPwAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"dBm"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the lower threshold for Tx power alarm in dBm after scaling and conversion to an integer.
			To convert back to dBm, convert this value to floating point and divide by 10,000."
	::= { wwpLeosPortXcvrEntry 108 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.109
	wwpLeosPortXcvrHighRxDbmPwAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"dBm"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the higher threshold for Rx power alarm in dBm after scaling and conversion to an integer.
			To convert back to dBm, convert this value to floating point and divide by 10,000."
	::= { wwpLeosPortXcvrEntry 109 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.110
	wwpLeosPortXcvrLowRxDbmPwAlarmThreshold OBJECT-TYPE
		SYNTAX Integer32
		UNITS
			"dBm"
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates the lower threshold for Rx power alarm in dBm after scaling and conversion to an integer.
			To convert back to dBm, convert this value to floating point and divide by 10,000."
	::= { wwpLeosPortXcvrEntry 110 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.2
	wwpLeosPortXcvrNotif OBJECT IDENTIFIER ::= { wwpLeosPortXcvrMIBObjects 2 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.2.1
	wwpLeosPortXcvrEventType OBJECT-TYPE
		SYNTAX INTEGER
		{
			inserted(1),
			removed(2),
			enabled(3),
			disabled(4)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates if the Xcvr specified by the wwpLeosPortXcvrId has come up, 
			gone down or has been selected."
	::= { wwpLeosPortXcvrNotif 1 }

	-- 1.3.6.1.4.1.6141.2.60.4.1.2.2
	wwpLeosPortXcvrErrorType OBJECT-TYPE
		SYNTAX INTEGER
		{
			none(0),
			chksumFailed(1),
			opticalFault(2)
		}
		ACCESS read-only
		STATUS current
		DESCRIPTION
			"Indicates if the Xcvr specified by the wwpLeosPortXcvrId is faulted because of
			checksum failure or optical fault. This object only makes sense if transceiver has
			been detected faulted, otherwise it returns 'none'."
	::= { wwpLeosPortXcvrNotif 2 }

	-- 1.3.6.1.4.1.6141.2.60.4.2
	wwpLeosPortXcvrMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosPortXcvrMIB 2 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0
	wwpLeosPortXcvrMIBNotifications OBJECT IDENTIFIER ::= { wwpLeosPortXcvrMIBNotificationPrefix 0 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.4
	wwpLeosPortXcvrLinkStateChangeNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId, wwpLeosPortXcvrEventType } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrLinkStateChangeNotification is sent if the Xcvr state has changed."
	::= { wwpLeosPortXcvrMIBNotifications 4 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.5
	wwpLeosPortXcvrErrorTypeNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId, wwpLeosPortXcvrErrorType } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrErrorTypeNotification is sent if the Xcvr is detected faulted because of some reason.
			Reason of failure is specified by wwpLeosPortXcvrErrorType."
	::= { wwpLeosPortXcvrMIBNotifications 5 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.6
	wwpLeosPortXcvrTempHighNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr 
			temperature exceeds the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 6 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.7
	wwpLeosPortXcvrTempLowNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr 
			temperature decreases the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 7 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.8
	wwpLeosPortXcvrTempNormalNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTempNormalNotification is sent if the Xcvr 
			temperature returns back to normal state."
	::= { wwpLeosPortXcvrMIBNotifications 8 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.9
	wwpLeosPortXcvrVoltageHighNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr 
			voltage exceeds the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 9 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.10
	wwpLeosPortXcvrVoltageLowNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr 
			voltage decreases the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 10 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.11
	wwpLeosPortXcvrVoltageNormalNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrVoltageNormalNotification is sent if the Xcvr 
			voltage returns back to normal state."
	::= { wwpLeosPortXcvrMIBNotifications 11 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.12
	wwpLeosPortXcvrBiasHighNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr 
			Bias exceeds the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 12 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.13
	wwpLeosPortXcvrBiasLowNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr 
			voltage decreases the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 13 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.14
	wwpLeosPortXcvrBiasNormalNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrBiasNormalNotification is sent if the Xcvr 
			Bias returns back to normal state."
	::= { wwpLeosPortXcvrMIBNotifications 14 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.15
	wwpLeosPortXcvrTxPowerHighNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr 
			TxPower exceeds the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 15 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.16
	wwpLeosPortXcvrTxPowerLowNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr 
			voltage decreases the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 16 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.17
	wwpLeosPortXcvrTxPowerNormalNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTxPowerNormalNotification is sent if the Xcvr 
			TxPower returns back to normal state."
	::= { wwpLeosPortXcvrMIBNotifications 17 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.18
	wwpLeosPortXcvrRxPowerHighNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr 
			RxPower exceeds the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 18 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.19
	wwpLeosPortXcvrRxPowerLowNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr 
			voltage decreases the threshold."
	::= { wwpLeosPortXcvrMIBNotifications 19 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.20
	wwpLeosPortXcvrRxPowerNormalNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrRxPowerNormalNotification is sent if the Xcvr 
			RxPower returns back to normal state."
	::= { wwpLeosPortXcvrMIBNotifications 20 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.21
	wwpLeosPortXcvrSpeedInfoMissingNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrSpeedInfoMissingNotification is sent if the Xcvr 
			speed information is not found."
	::= { wwpLeosPortXcvrMIBNotifications 21 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.22
	wwpLeosPortXcvrBiasHighWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr 
			Bias exceeds the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 22 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.23
	wwpLeosPortXcvrBiasLowWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr 
			voltage decreases below the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 23 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.24
	wwpLeosPortXcvrTempHighWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr 
			temperature exceeds the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 24 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.25
	wwpLeosPortXcvrTempLowWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr 
			temperature decreases below the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 25 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.26
	wwpLeosPortXcvrVoltageHighWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr 
			voltage exceeds the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 26 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.27
	wwpLeosPortXcvrVoltageLowWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr 
			voltage decreases below  the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 27 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.28
	wwpLeosPortXcvrTxPowerHighWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr 
			TxPower exceeds the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 28 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.29
	wwpLeosPortXcvrTxPowerLowWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr 
			TxPower decreases below the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 29 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.30
	wwpLeosPortXcvrRxPowerHighWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr 
			RxPower exceeds the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 30 }

	-- 1.3.6.1.4.1.6141.2.60.4.2.0.31
	wwpLeosPortXcvrRxPowerLowWarningNotification NOTIFICATION-TYPE
		OBJECTS { wwpLeosPortXcvrId } 
		STATUS current
		DESCRIPTION
			"A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr 
			RxPower decreases below the warning threshold."
	::= { wwpLeosPortXcvrMIBNotifications 31 }

	-- 1.3.6.1.4.1.6141.2.60.4.3
	wwpLeosPortXcvrMIBConformance OBJECT IDENTIFIER ::= { wwpLeosPortXcvrMIB 3 }

	-- 1.3.6.1.4.1.6141.2.60.4.3.1
	wwpLeosPortXcvrMIBCompliances OBJECT IDENTIFIER ::= { wwpLeosPortXcvrMIBConformance 1 }

	-- 1.3.6.1.4.1.6141.2.60.4.3.2
	wwpLeosPortXcvrMIBGroups OBJECT IDENTIFIER ::= { wwpLeosPortXcvrMIBConformance 2 }

END