path: root/MIBS/calix/E5-110-IESCOMMON-MIB

-- $Log: E5-110-IESCOMMON-MIB.mib $
-- Revision 1.8  2010/04/23 10:46:20  maverick
-- Revision 1.7  2009/11/26 13:06:52  maverick
-- add comment to obsoleted mib entries, mibble checked
-- Revision 1.6  2009/11/23 06:51:49  maverick
-- Revision 1.5  2009/10/20 12:25:27  maverick
-- Revision 1.4  2009/09/01 01:32:31  maverick
-- Revision 1.3  2009/05/12 06:05:54  niceguy
-- Revision 1.2  2009/05/12 03:28:46  niceguy
-- Revision 1.1  2008/07/11 09:36:13  maverick
-- Initial revision
-- Revision 1.3  2008/01/11 01:21:27  niceguy
-- Revision 1.2  2007/12/12 09:39:50  niceguy
-- Revision 1.1  2007/12/03 01:45:28  niceguy
-- Initial revision
-- Initial revision

E5-110-IESCOMMON-MIB DEFINITIONS ::= BEGIN

    IMPORTS

	enterprises
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM SNMPv2-SMI
--		FROM RFC-1212
	DisplayString, ifIndex, PhysAddress
	  	FROM RFC1213-MIB
	RowStatus
		FROM SNMPv2-TC
	PortList
		FROM Q-BRIDGE-MIB
	TRAP-TYPE
		FROM RFC-1215
	IpAddress
	  FROM RFC1155-SMI
	iesSeriesCommon,e5x110
		FROM E5-110-MIB;

	iesChassis 	OBJECT IDENTIFIER ::= { iesSeriesCommon 1 }
	iesHWMonitor 	OBJECT IDENTIFIER ::= { iesSeriesCommon 2 }
	iesSysMgnt 	OBJECT IDENTIFIER ::= { iesSeriesCommon 3 }

	iesSysState     	OBJECT IDENTIFIER ::= { iesSysMgnt 1 }
	iesSysMaintenance 	OBJECT IDENTIFIER ::= { iesSysMgnt 2 }
	iesSysTimeSetup 	OBJECT IDENTIFIER ::= { iesSysMgnt 3 }
	iesSysAccessControl 	OBJECT IDENTIFIER ::= { iesSysMgnt 4 }
	iesSysStaticRoute	OBJECT IDENTIFIER ::= { iesSysMgnt 5 }
	iesSyslogSetup 	    	OBJECT IDENTIFIER ::= { iesSysMgnt 6 }
	iesSysDhcpSetup		OBJECT IDENTIFIER ::= { iesSysMgnt 7 }
	iesSysSNMPSetup		OBJECT IDENTIFIER ::= { iesSysMgnt 8 }
	iesSysDot1xSetup	OBJECT IDENTIFIER ::= { iesSysMgnt 9 }
	iesSysMacFilter		OBJECT IDENTIFIER ::= { iesSysMgnt 10 }
	iesSysPacketFilter	OBJECT IDENTIFIER ::= { iesSysMgnt 11 }
	iesSysMacCountFilter	OBJECT IDENTIFIER ::= { iesSysMgnt 12 }
	iesSysMulticastGroup	OBJECT IDENTIFIER ::= { iesSysMgnt 13 }
	iesSysIgmpFilter	OBJECT IDENTIFIER ::= { iesSysMgnt 14 } -- Obsoleted since Revision 3.0.0 at 2009/11/26 by maverick

	iesL2SW    	OBJECT IDENTIFIER ::= { iesSeriesCommon 4 }

-- Chassis, slot information

	iesNumOfChassis OBJECT-TYPE
	SYNTAX	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The number of chassis in the IES-2000/3000 system"
	::= { iesChassis 1 }

	iesChassisTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF IesChassisEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"The table which contains the chassis information in IES-2000/3000
		system"
	::= { iesChassis 2 }

	iesChassisEntry	OBJECT-TYPE
	SYNTAX	IesChassisEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		""
	INDEX	{ iesChassisId }
	::= { iesChassisTable 1 }

	IesChassisEntry ::=
	SEQUENCE {
		iesChassisId		INTEGER,
		iesChassisFrameNumber	INTEGER,
		iesChassisSerialNumber  DisplayString,
		iesChassisNumber	INTEGER,
		iesChassisStatus  	INTEGER,
		iesChassisProductPartNumber  DisplayString,
		iesChassisHwRevisionNumber  DisplayString,
		iesChassisCleiCode  DisplayString,
		iesChassisHwVersion  DisplayString,
		iesChassisMacAddress  DisplayString
	}

	iesChassisId	OBJECT-TYPE
	SYNTAX	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The Chassis ID"
	::= { iesChassisEntry 1 }

	iesChassisFrameNumber	OBJECT-TYPE
	SYNTAX	INTEGER
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The Frame ID"
	::= { iesChassisEntry 2 }


	iesChassisSerialNumber	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The Chassis Serial Number"
	::= { iesChassisEntry 3 }

	iesChassisNumber	OBJECT-TYPE
	SYNTAX	INTEGER
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The Chassis Number which is defined by the system administrator
		for management purpose"
	::= { iesChassisEntry 4 }

	iesChassisStatus 	OBJECT-TYPE
	SYNTAX	INTEGER {
			empty(1),
			up(2),
			down(3),
			testing(4)
		}
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The current status of the chassis."
	::= { iesChassisEntry 5 }

	iesChassisProductPartNumber	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Product part number"
	::= { iesChassisEntry 6 }

	iesChassisHwRevisionNumber	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Hardware revision Number"
	::= { iesChassisEntry 7 }

	iesChassisCleiCode	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"CLEI code"
	::= { iesChassisEntry 8 }

	iesChassisHwVersion	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Hardware version"
	::= { iesChassisEntry 9 }

	iesChassisMacAddress	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"MAC address"
	::= { iesChassisEntry 10 }

	iesSlotTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF IesSlotEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"The table which contains the slot information in a chassis of
		IES-2000/3000 system"
	::= { iesChassis 3 }

	iesSlotEntry	OBJECT-TYPE
	SYNTAX	IesSlotEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		""
	INDEX	{ iesChassisId, iesSlotId }
	::= { iesSlotTable 1 }

	IesSlotEntry ::=
	SEQUENCE {
		iesSlotId		INTEGER,
		iesSlotModuleType	INTEGER,
		iesSlotModuleDescr	DisplayString,
		iesSlotModuleFWVersion  DisplayString,
		iesSlotModuleDriverVersion DisplayString,
		iesSlotModuleModemCodeVersion DisplayString,
		iesSlotModuleStatus	INTEGER,
		iesSlotModuleAlarmStatus INTEGER
	}

	iesSlotId	OBJECT-TYPE
	SYNTAX	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Identity of the slot"
	::= { iesSlotEntry 1 }

	iesSlotModuleType	OBJECT-TYPE
	SYNTAX	INTEGER {
			unknown(1),
			msc1000-L2(2),
			msc1000-ML(3),
			alc1024-61(4),
			vlc1012(5),
			slc1024(6),
			alc1024-63(7),
			msc1000A(8),
			vlc1124(9),
			alc1224-71(10),
			alc1224-73(11),
			slc1224-22(12),
			alc1224-51(13),
			alc1224-53(14)			
		}
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Card type of the plug-in card in IES-2000/3000."
	::= { iesSlotEntry 2 }

	iesSlotModuleDescr	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The descriptions of the plug-in card in IES-2000/3000."
	::= { iesSlotEntry 3 }


	iesSlotModuleFWVersion	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The firmware version of the plug-in card in IES-2000/3000."
	::= { iesSlotEntry 4 }

	iesSlotModuleDriverVersion	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The DSL driver  of the plug-in card in IES-2000/3000."
	::= { iesSlotEntry 5 }

	iesSlotModuleModemCodeVersion	OBJECT-TYPE
	SYNTAX	DisplayString
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The DSL modem code version of the plug-in card in IES-2000/3000"
	::= { iesSlotEntry 6 }


	iesSlotModuleStatus	OBJECT-TYPE
	SYNTAX	INTEGER {
			empty(1),
			up(2),
			down(3),
			testing(4),
			standby(5)
		}
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The module state of the plug-in card in IES-2000/3000"
	::= { iesSlotEntry 7 }

	iesSlotModuleAlarmStatus	OBJECT-TYPE
	SYNTAX	INTEGER (0..255)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"This variable indicates the alarm status of the module.
       		     It is a bit map represented as a sum, therefore, it can represent
       		     multiple defects simultaneously. The moduleNoDefect should be set
       		     if and only if no other flag is set.

       		     The various bit positions are:
                     1   moduleNoDefect
             	     2   moduleOverHeat
		     3	 moduleFanRpmLow
		     4	 moduleVoltageLow
		     5   moduleThermalSensorFailure
		     6   modulePullOut
		     7   powerDC48VAFailure
		     8   powerDC48VBFailure
		     9   extAlarmInputTrigger
		    10   moduleDown
		    11 	 mscSwitchOverOK
		    12	 networkTopologyChange"
	::= { iesSlotEntry 8 }



	iesMscPortConfTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF IesMscPortConfEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"The table contains port configuration information in MSC1000."
	::= { iesChassis 4 }

	iesMscPortConfEntry	OBJECT-TYPE
	SYNTAX	IesMscPortConfEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		""
	INDEX	{ iesChassisId,iesSlotId,iesMscPortId }
	::= { iesMscPortConfTable 1}

	IesMscPortConfEntry ::=
	SEQUENCE {
		iesMscPortId			INTEGER,
		iesMscPortType			INTEGER,
		iesMscPortIfIndex		INTEGER,
		iesMscPortSpeed			INTEGER,
		iesMscPortDuplex		INTEGER,
		iesMscPortFlowControl   	INTEGER,
		iesMscPortDefaultVLANTagging	INTEGER,
		iesMscPortTrunkGroupId		INTEGER,
		iesMscPortMode			INTEGER,
		iesMscPortVLANTrunking		INTEGER
	}

	iesMscPortId	OBJECT-TYPE
	SYNTAX	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Identity of the extension slot in MSC1000."
	::= { iesMscPortConfEntry 1 }

	iesMscPortType	OBJECT-TYPE
	SYNTAX	INTEGER {
				unknown(1),
				e1000BaseT(2),
				e1000BaseLX(3),
				e1000BaseSX(4),
				e100BaseFX(5),
				e100BaseTX(6),
				e1000BaseGBIC(7)
			}
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Port type of the extension slot in MSC1000."
	::= { iesMscPortConfEntry 2 }

	iesMscPortIfIndex	OBJECT-TYPE
	SYNTAX	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		""
	::= { iesMscPortConfEntry 3 }

	iesMscPortSpeed	OBJECT-TYPE
	SYNTAX	INTEGER {
				auto(1),
				e1000M(2),
				e100M(3),
				e10M(4)
			}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		""
	::= { iesMscPortConfEntry 4 }

	iesMscPortDuplex	OBJECT-TYPE
	SYNTAX	INTEGER {
				full(1),
				half(2)
			}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		""
	::= { iesMscPortConfEntry 5 }

	iesMscPortFlowControl	OBJECT-TYPE
	SYNTAX	INTEGER {
				true(1),
				false(2)
			}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		""
	::= { iesMscPortConfEntry 6 }

	iesMscPortDefaultVLANTagging	OBJECT-TYPE
	SYNTAX	INTEGER {
				true(1),
				false(2)
			}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		""
	::= { iesMscPortConfEntry 7 }

	iesMscPortTrunkGroupId	OBJECT-TYPE
	SYNTAX	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		""
	::= { iesMscPortConfEntry 8 }

	iesMscPortMode	OBJECT-TYPE
	SYNTAX	INTEGER {
				uplink(1),
				subtending(2)
			}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		" The operational mode for uplink and subtending ports in MSC. Only
		the operational mode of subtending ports can be modified."
	::= { iesMscPortConfEntry 9 }

	iesMscPortVLANTrunking	OBJECT-TYPE
	SYNTAX	INTEGER {
				enable(1),
				disable(2)
			}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		" The VLAN trunking setting for uplink and subtending ports in MSC."
	::= { iesMscPortConfEntry 10 }



-- System Hardware Monitoring

-- Fan rpm table

        iesFanRpmTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesFanRpmEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                    	"A table that contains rpm information about the fans."
        ::= { iesHWMonitor 1 }

        iesFanRpmEntry OBJECT-TYPE
        SYNTAX  IesFanRpmEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"A list of rpm information for each fan."
        INDEX  { iesChassisId,iesFanRpmIndex }
        ::= { iesFanRpmTable 1 }

        IesFanRpmEntry ::=
           SEQUENCE {
        	iesFanRpmIndex		INTEGER,
		iesFanRpmCurValue	INTEGER,
		iesFanRpmMaxValue	INTEGER,
		iesFanRpmMinValue	INTEGER,
		iesFanRpmLowThresh	INTEGER,
		iesFanRpmDescr		DisplayString
           }

        iesFanRpmIndex OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The identity of the fan."
        ::= { iesFanRpmEntry 1 }

        iesFanRpmCurValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The current rpm of the fan."
        ::= { iesFanRpmEntry 2 }

        iesFanRpmMaxValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The maximum rpm ever performed by the fan."
        ::= { iesFanRpmEntry 3 }

        iesFanRpmMinValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The minimum rpm ever performed by the fan."
        ::= { iesFanRpmEntry 4 }

        iesFanRpmLowThresh OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The low threshold of the rpm of the fan. If the current rpm is less than
			the threshold, the device will initiate the fanRpmLow trap."
        ::= { iesFanRpmEntry 5 }

        iesFanRpmDescr OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The description of the fan (e.g. location, function, etc.)."
        ::= { iesFanRpmEntry 6 }



-- Voltage table

        iesVoltageTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesVoltageEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                      	"A table that contains voltage information about the system."
        ::= { iesHWMonitor 2 }

        iesVoltageEntry OBJECT-TYPE
        SYNTAX  IesVoltageEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"A list of voltage information for each sensor."
        INDEX  { iesChassisId,iesSlotId,iesVoltageIndex }
        ::= { iesVoltageTable 1 }

        IesVoltageEntry ::=
           SEQUENCE {
        	iesVoltageIndex			INTEGER,
		iesVoltageCurValue		INTEGER,
		iesVoltageMaxValue		INTEGER,
		iesVoltageMinValue		INTEGER,
		iesVoltageNominalValue		INTEGER,
		iesVoltageLowThresh		INTEGER,
		iesVoltageDescr			DisplayString
           }

        iesVoltageIndex OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The identity of the sensor."
        ::= { iesVoltageEntry 1 }

        iesVoltageCurValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The current voltage detected by the sensor (in milli-voltage)."
        ::= { iesVoltageEntry 2 }

        iesVoltageMaxValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The maximum voltage ever detected by the sensor (in milli-voltage)."
        ::= { iesVoltageEntry 3 }

        iesVoltageMinValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The minimum voltage ever detected by the sensor (in milli-voltage)."
        ::= { iesVoltageEntry 4 }

        iesVoltageNominalValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The nominal voltage which the power should supply (in milli-voltage)."
        ::= { iesVoltageEntry 5 }

        iesVoltageLowThresh OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The low threshold of the voltage (in milli-voltage). If the current voltage
			is less than the threshold, the device will initiate the voltageLow trap."
        ::= { iesVoltageEntry 6 }

        iesVoltageDescr OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The description of the voltage (e.g. location, nominal value, etc.)."
        ::= { iesVoltageEntry 7 }



-- System temperature table

        iesSysTempTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesSysTempEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                      	"A table that contains temperature information about system."
        ::= { iesHWMonitor 3 }

        iesSysTempEntry OBJECT-TYPE
        SYNTAX  IesSysTempEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"A list of temperature information for each sensor."
        INDEX  { iesChassisId,iesSlotId,iesSysTempIndex }
        ::= { iesSysTempTable 1 }

        IesSysTempEntry ::=
           SEQUENCE {
        	iesSysTempIndex		INTEGER,
		iesSysTempCurValue	INTEGER,
		iesSysTempMaxValue	INTEGER,
		iesSysTempMinValue	INTEGER,
		iesSysTempHighThresh	INTEGER,
		iesSysTempDescr		DisplayString
           }

        iesSysTempIndex OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The identity of the sensor."
        ::= { iesSysTempEntry 1 }

        iesSysTempCurValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The current temperature detected in Celsius by the sensor."
        ::= { iesSysTempEntry 2 }

        iesSysTempMaxValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The maximum temperature ever detected in Celsius by the sensor."
        ::= { iesSysTempEntry 3 }

        iesSysTempMinValue OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The minimum temperature ever detected in Celsius by the sensor."
        ::= { iesSysTempEntry 4 }

        iesSysTempHighThresh OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The high threshold of the temperature in Celsius. If the current temperature
			is higher than the threshold, the device will initiate the overheat trap."
        ::= { iesSysTempEntry 5 }

        iesSysTempDescr OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The description of the temperature sensor (e.g. location, function, etc.)."
        ::= { iesSysTempEntry 6 }



-- System Management

	-- System Status

	iesSystemCurrentStatus OBJECT-TYPE
    	SYNTAX  INTEGER(0..255)
    	MAX-ACCESS  read-only
    	STATUS  current
    	DESCRIPTION "This variable indicates the status of the system.
       		     The sysCurrentStatus is a bit map represented
       		     as a sum, therefore, it can represent multiple defects
       		     simultaneously. The sysNoDefect should be set if and only if
       		     no other flag is set.

       		     The various bit positions are:
                     1   sysNoDefect
             	     2   sysOverHeat
		     3	 sysFanRpmLow
		     4	 sysVoltageLow
		     5   sysThermalSensorFailure
		     6   modulePullOut
		     7   powerDC48VAFailure
		     8   powerDC48VBFailure
		     9   extAlarmInputTrigger
		    10   moduleDown
		    11 	 mscSwitchOverOK
		    12	 networkTopologyChange"

     	::= {iesSysState 1 }

        iesProblemCause OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"It describes the problem occurred in the system, e.g. maintenance
                      	operation failures, system reboot, error log, ...etc."
        ::= { iesSysState 2 }



-- System Maintenance

        iesMaintenanceOps OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The managed object is for system maintenance. When the EMS
                      	 wants to trigger the system maitenance operation, the EMS
                      	 shall send SNMP-SET message to set the corresponding bit value
                      	 to be 1. The various bit positions are:
                      	 BIT 1: config save
                      	 BIT 2: reset
			 BIT 3: local loopback test
			 BIT 4: remote loopback test
			 BIT 5: clear system alarms
			 BIT 6: F4 loopback test
			 BIT 7: F5 loopback test
			 BIT 8: DSL Line Diagnostic"
        ::= { iesSysMaintenance 1 }

        iesMaintenanceTarget OBJECT-TYPE
        SYNTAX  INTEGER (1..48)
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The managed object is used for identify the target on which
			 the maintenance operation should be performed."
        ::= { iesSysMaintenance 2 }


-- variables for provisioning DSL line in batch mode

        iesMaintenanceDSLConfOps OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The managed object is for xDSL line configuration. When the EMS
                      	 wants to issue the desired operation, the EMS
                      	 shall send SNMP-SET message to set the corresponding bit value
                      	 to be 1. The various bit positions are:
                      	 BIT  1: enable port
                      	 BIT  2: disable port
			 BIT  3: set DSL mode
			 BIT  4: set profile
			 BIT  5: enable mac filter
			 BIT  6: disable mac filter
			 BIT  7: set packet filter
			 BIT  8: enable dot1x
			 BIT  9: disable dot1x
			 BIT 10: set dot1x control
			 BIT 11: enable dot1x re-authentication
			 BIT 12: disable dot1x re-authentication
			 BIT 13: set dot1x re-authentication period
			 BIT 14: enable mac count filter
			 BIT 15: disable mac count filter
			 BIT 16: set mac count filter
			 BIT 17: set alarm profile
			 BIT 18: set Annex L (Only in AnnexA)
			 BIT 19: set power management
			 BIT 20: set rate adaptation mode
			 BIT 21: set IGMP filter (Not support after E5-111 v3.0)
			 BIT 22: enable Annex M
			 BIT 23: disable Annex M"
        ::= { iesSysMaintenance 3 }

        iesMaintenanceDSLConfTarget OBJECT-TYPE
        SYNTAX  OCTET STRING
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The managed object is used for identify the target on which
			 the line configuration should be performed. The target is encoded
		         as:
		         Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
		         Byte 2~3: each octet specifies a set of eight slots, with the
		                     first octet specifying slots 1 through 8 and the second
		                     octet specifying slots 9 through 16.
		         Byte 4: reserved
		         Byte 5~11: each octet specifies a set of eight ports, with the first
		                   octet specifying ports 1 through 8, etc."
        ::= { iesSysMaintenance 4 }

        iesMaintenanceDSLConfProfileName OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (1..31))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The DSL profile name"
        ::= { iesSysMaintenance 5 }

        iesMaintenanceDSLConfMode OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The DSL mode. The semantic for each bit is:
                      	Bit 1: ADSL, G.lite
                      	Bit 2: ADSL, G.dmt
                      	Bit 3: ADSL, T1.413
                      	Bit 4: ADSL, Auto
                      	Bit 5: ADSL, ETSI
                      	Bit 6: ADSL2,
                      	Bit 7: ADSL2+"
        ::= { iesSysMaintenance 6 }

        iesMaintenanceDSLConfPktFilter OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The packet filter. The semantic for each bit is:
                      	Bit 1: accept all
                      	Bit 2: accept PPPoE only
                      	Bit 3: reject ARP
                      	Bit 4: reject DHCP
			Bit 5: reject EAPOL
                      	Bit 6: reject PPPoE
			Bit 7: reject NetBIOS
			Bit 8: reject IGMP
			Bit 9: reject IP"
        ::= { iesSysMaintenance 7 }

        iesMaintenanceDSLConfDot1xControl OBJECT-TYPE
        SYNTAX INTEGER {
        		auto(1),
			forceAuth(2),
			forceUnAuth(3)
		}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The configuration defines the 802.1x control type."
	::= { iesSysMaintenance 8 }

        iesMaintenanceDSLConfDot1xReauthPeriod OBJECT-TYPE
        SYNTAX 	INTEGER
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The configuration defines the 802.1x re-authentication period (seconds)."
	::= { iesSysMaintenance 9 }

        iesMaintenanceDSLConfMacCount OBJECT-TYPE
        SYNTAX 	INTEGER
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The configuration defines the number of mac addresses which can pass through the port."
	::= { iesSysMaintenance 10 }

        iesMaintenanceVpi OBJECT-TYPE
        SYNTAX  INTEGER (0..255)
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"VPI of the channel"
        ::= { iesSysMaintenance 11 }

        iesMaintenanceVci OBJECT-TYPE
        SYNTAX  INTEGER (1..65535)
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"VCI of the channel"
        ::= { iesSysMaintenance 12 }

        iesMaintenanceDSLConfAlarmProfileName OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE (1..31))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The DSL alarm profile name"
        ::= { iesSysMaintenance 13 }

        iesMaintenanceDSLConfAnnexL OBJECT-TYPE
        SYNTAX  INTEGER {
        		enableNarrowMode(1),
        		enableWideMode(2),
        		disable(3)
        	}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The annex L setting of the ADSL line (Only in AnnexA)."
        ::= { iesSysMaintenance 14 }

        iesMaintenanceDSLConfPmMode OBJECT-TYPE
        SYNTAX  INTEGER {
        		enableL2Mode(1),
        		enableL3Mode(2),
        		disable(3)
        	}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The power management mode of the ADSL line."
        ::= { iesSysMaintenance 15 }

        iesMaintenanceDSLConfRateMode OBJECT-TYPE
        SYNTAX	INTEGER {
                 	fixed(1),		-- no rate adaptation
                 	adaptAtStartup(2),	-- perform rate adaptation
                                         	-- only at initialization
                 	adaptAtRuntime(3)	-- perform rate adaptation at
                                         	-- any time
             	}
        MAX-ACCESS  read-write
        STATUS	current
        DESCRIPTION
                 	"Defines what form of transmit rate adaptation is
                 	configured on this modem.  See ADSL Forum TR-005 [3]
                 	for more information."
        ::= { iesSysMaintenance 16 }

        iesMaintenanceDSLConfIgmpFilter OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE (1..31))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The IGMP filter name."
        ::= { iesSysMaintenance 17 }


 -- System Time Setup

        iesTimeServerMode OBJECT-TYPE
        SYNTAX INTEGER {
        		none(1),
			daytime(2),
			time(3),
			ntp(4)
		}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The mechanism of Time Server when the system boots up."
	::= { iesSysTimeSetup 1 }

	iesTimeServerIP OBJECT-TYPE
        SYNTAX IpAddress
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The IP Address of Time Server"
	::= { iesSysTimeSetup 2 }

	iesSystemTime OBJECT-TYPE
        SYNTAX DisplayString
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The system time"
	::= { iesSysTimeSetup 3 }

	iesSystemDate OBJECT-TYPE
        SYNTAX DisplayString
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The system date"
	::= { iesSysTimeSetup 4 }

	iesSystemTimeZone OBJECT-TYPE
	SYNTAX INTEGER {
        			none(0),
        			utc-1200(1),
        			utc-1100(2),
        			utc-1000(3),
        			utc-0900(4),
        			utc-0800(5),
        			utc-0700(6),
        			utc-0600(7),
        			utc-0500(8),
        			utc-0400(9),
        			utc-0300(10),
        			utc-0200(11),
        			utc-0100(12),
        			utc(13),
        			utc0100(14),
        			utc0200(15),
        			utc0300(16),
        			utc0400(17),
        			utc0500(18),
        			utc0600(19),
        			utc0700(20),
        			utc0800(21),
        			utc0900(22),
        			utc1000(23),
        			utc1100(24),
        			utc1200(25)
			}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The system time zone"
	::= { iesSysTimeSetup 5 }



-- System Access Control

        iesAccessCtrlTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesAccessCtrlEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                      	"A table that contains information about service access control."
        ::= { iesSysAccessControl 1 }

        iesAccessCtrlEntry OBJECT-TYPE
        SYNTAX  IesAccessCtrlEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"A list of access control entry."
        INDEX  { iesAccessCtrlService }
        ::= { iesAccessCtrlTable 1 }

        IesAccessCtrlEntry ::=
           SEQUENCE {
        	iesAccessCtrlService	INTEGER,
		iesAccessCtrlEnable	INTEGER,
		iesAccessCtrlPort	INTEGER
           }

        iesAccessCtrlService OBJECT-TYPE
        SYNTAX  INTEGER {
			telnet(1),
			ftp(2),
			web(3),
			icmp(4)
	}
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The service type of the access control entry."
        ::= { iesAccessCtrlEntry 1 }

        iesAccessCtrlEnable OBJECT-TYPE
        SYNTAX  INTEGER {
			enable(1),
			disable(2)
	}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"Enable or disable the service."
        ::= { iesAccessCtrlEntry 2 }

        iesAccessCtrlPort OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The port number which the service uses."
        ::= { iesAccessCtrlEntry 3 }

	-- secured client table
	iesMaxNumOfSecuredClients OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The maximum number of sets of secured clients."
        ::= { iesSysAccessControl 2}

        iesSecuredClientTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesSecuredClientEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                      	"A table that contains information about secured clients."
        ::= { iesSysAccessControl 3 }

        iesSecuredClientEntry OBJECT-TYPE
        SYNTAX  IesSecuredClientEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"A list of secured client entry."
        INDEX  { iesSecuredClientStartIp, iesSecuredClientEndIp }
        ::= { iesSecuredClientTable 1 }

        IesSecuredClientEntry ::=
           SEQUENCE {
        	iesSecuredClientStartIp	IpAddress,
		iesSecuredClientEndIp		IpAddress,
		iesSecuredClientService	INTEGER,
		iesSecuredClientRowStatus	RowStatus
           }

        iesSecuredClientStartIp OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The starting IP address of a set of secured clients."
        ::= { iesSecuredClientEntry 1 }

        iesSecuredClientEndIp OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The ending IP address of a set of secured clients."
        ::= { iesSecuredClientEntry 2 }

        iesSecuredClientService OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                      	"Each bit corresponds to a service. The bit is set to 1 if the
			 service is enabled, and set to 0 if the service is disabled.
			 The various bit positions are:
             BIT 1: telnet
             BIT 2: FTP
			 BIT 3: web
			 BIT 4: ICMP"
        ::= { iesSecuredClientEntry 3 }

        iesSecuredClientRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                      	"This object is used to create a new row or modify or delete an existing row
			 in this table. A row is activated by setting this object to `active', and is
			 deactivated by setting it to 'notInService'."
        ::= { iesSecuredClientEntry 4 }



-- Static Route

        iesMaxNumOfStaticRoutes OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The maximum number of static routes."
        ::= { iesSysStaticRoute 1 }

        iesStaticRouteTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesStaticRouteEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                      	"A table that contains information about static routes."
        ::= { iesSysStaticRoute 2 }

        iesStaticRouteEntry OBJECT-TYPE
        SYNTAX  IesStaticRouteEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"A list of static route entry."
        INDEX  { iesStaticRouteName }
        ::= { iesStaticRouteTable 1 }

        IesStaticRouteEntry ::=
           SEQUENCE {
        	iesStaticRouteName		DisplayString,
		iesStaticRouteDest		IpAddress,
		iesStaticRouteMask		IpAddress,
		iesStaticRouteGateway		IpAddress,
		iesStaticRouteMetric		INTEGER,
		iesStaticRouteRowStatus		RowStatus
           }

        iesStaticRouteName OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The name of the static route."
        ::= { iesStaticRouteEntry 1 }

        iesStaticRouteDest OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                      	"The destination IP address of the static route."
        ::= { iesStaticRouteEntry 2 }

        iesStaticRouteMask OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                      	"The subnet mask of the static route."
        ::= { iesStaticRouteEntry 3 }

        iesStaticRouteGateway OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                      	"The gateway IP address of the static route."
        ::= { iesStaticRouteEntry 4 }

        iesStaticRouteMetric OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                      	"The routing metric of the static route."
        ::= { iesStaticRouteEntry 5 }

        iesStaticRouteRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
                      	"This object is used to create a new row or modify or delete an existing row
			 in this table. A row is activated by setting this object to `active', and is
			 deactivated by setting it to 'notInService'."
        ::= { iesStaticRouteEntry 6 }



-- syslog

        iesSysLogEnable OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"Enable/disable syslog function."
        ::= { iesSyslogSetup 1 }

        iesSysLogServer OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"IP address of the syslog server."
        ::= { iesSyslogSetup 2 }

        iesSysLogFacility OBJECT-TYPE
        SYNTAX  INTEGER {
			local1(1),
			local2(2),
			local3(3),
			local4(4),
			local5(5),
			local6(6),
			local7(7)
			}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"Log facility used by the syslog function."
        ::= { iesSyslogSetup 3 }



-- DHCP Setup

        iesDhcpRelayEnable OBJECT-TYPE
        SYNTAX  INTEGER {
				enable(1),
				disable(2)
			}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"Enable/disable DHCP relay function."
        ::= { iesSysDhcpSetup 1 }

        iesDhcpRelayOption82Enable OBJECT-TYPE
        SYNTAX  INTEGER {
				enable(1),
				disable(2)
			}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"Enable/disable DHCP relay Option82 function."
        ::= { iesSysDhcpSetup 2 }

        iesDhcpRelayOption82Info OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"User specific Option82 information."
        ::= { iesSysDhcpSetup 3 }

	iesMaxNumOfDhcpServers OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The maximum number of DHCP servers."
        ::= { iesSysDhcpSetup 4 }

	iesDhcpServerTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesDhcpServerEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A table that contains DHCP server information."
        ::= { iesSysDhcpSetup 5 }

        iesDhcpServerEntry OBJECT-TYPE
        SYNTAX  IesDhcpServerEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"The entry of DHCP server table."
        INDEX  { iesDhcpServerIp }
        ::= { iesDhcpServerTable 1 }

        IesDhcpServerEntry ::=
           SEQUENCE {
        	iesDhcpServerIp		 	IpAddress,
		iesDhcpServerRowStatus		RowStatus
           }

	iesDhcpServerIp OBJECT-TYPE
	SYNTAX IpAddress
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The IP address of the DHCP server."
	::= { iesDhcpServerEntry 1 }

	iesDhcpServerRowStatus OBJECT-TYPE
	SYNTAX 	RowStatus
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The row status of the DHCP server entry."
	::= { iesDhcpServerEntry 2 }

-- SNMP setup, Trap Destination

	iesMaxNumberOfTrapDestinations OBJECT-TYPE
	SYNTAX INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The max number of the trap destinations."
	::= { iesSysSNMPSetup 1 }

	iesSNMPTrapDestTable	OBJECT-TYPE
    	SYNTAX  SEQUENCE OF IesSNMPTrapDestEntry
    	MAX-ACCESS  not-accessible
    	STATUS  current
    	DESCRIPTION
                "A table that contains SNMP trap destination information."
    	::= { iesSysSNMPSetup 2 }

    	iesSNMPTrapDestEntry OBJECT-TYPE
        SYNTAX  IesSNMPTrapDestEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"The entry of SNMP trap destination table."
        INDEX  { iesTrapDestIp, iesTrapDestPort }
        ::= { iesSNMPTrapDestTable 1 }

   	IesSNMPTrapDestEntry ::=
           SEQUENCE {
            iesTrapDestIp		 	IpAddress,
            iesTrapDestPort			INTEGER,
	    iesTrapDestRowStatus		RowStatus
    	   }

	iesTrapDestIp OBJECT-TYPE
	SYNTAX IpAddress
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The IP address of the trap destination."
	::= { iesSNMPTrapDestEntry 1 }

	iesTrapDestPort OBJECT-TYPE
	SYNTAX INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The UDP port of the trap destination."
	::= { iesSNMPTrapDestEntry 2 }

	iesTrapDestRowStatus OBJECT-TYPE
	SYNTAX 	RowStatus
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The row status of the trap destination entry."
	::= { iesSNMPTrapDestEntry 3}

	iesSnmpGetCommunity OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The SNMP get community."
	::= { iesSysSNMPSetup 3 }

	iesSnmpSetCommunity OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The SNMP set community."
	::= { iesSysSNMPSetup 4 }

	iesSnmpTrapCommunity OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The SNMP trap community."
	::= { iesSysSNMPSetup 5 }


-- RADIUS Server setup

	iesMaxNumberOfRadiusServers OBJECT-TYPE
	SYNTAX 	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The max number of the RADIUS Servers."
	::= { iesSysDot1xSetup 1 }

	iesRadiusServerTable	OBJECT-TYPE
   	SYNTAX  SEQUENCE OF IesRadiusServerEntry
    	MAX-ACCESS  not-accessible
    	STATUS  current
    	DESCRIPTION
                "A table that contains Radius Server information."
    	::= { iesSysDot1xSetup 2 }

    	iesRadiusServerEntry OBJECT-TYPE
        SYNTAX  IesRadiusServerEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        	"The entry of Radius Server table."
        INDEX  { iesRadiusServerIndex }
        ::= { iesRadiusServerTable 1 }

   	IesRadiusServerEntry ::=
           SEQUENCE {
            iesRadiusServerIndex		INTEGER,
            iesRadiusServerIp		 	IpAddress,
            iesRadiusServerPort			INTEGER,
            iesRadiusSharedSecret		DisplayString,
	    iesRadiusServerRowStatus		RowStatus
    	   }

        iesRadiusServerIndex OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        	"The identity of the RADIUS server."
        ::= { iesRadiusServerEntry 1 }

	iesRadiusServerIp OBJECT-TYPE
	SYNTAX 	IpAddress
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The IP address of the Radius Server."
	::= { iesRadiusServerEntry 2 }

	iesRadiusServerPort OBJECT-TYPE
	SYNTAX  INTEGER
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The UDP port of the Radius Server."
	::= { iesRadiusServerEntry 3 }

	iesRadiusSharedSecret OBJECT-TYPE
	SYNTAX 	DisplayString
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The shared secret of the Radius Server."
	::= { iesRadiusServerEntry 4 }

	iesRadiusServerRowStatus OBJECT-TYPE
	SYNTAX 	RowStatus
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The row status of the Radius Server entry."
	::= { iesRadiusServerEntry 5 }


-- 802.1x option

	iesDot1xEnable OBJECT-TYPE
	SYNTAX  INTEGER {
				enable(1),
				disable(2)
			}
        MAX-ACCESS  read-write
	STATUS	current
	DESCRIPTION
		"Enable/disable the 802.1x function."
	::= { iesSysDot1xSetup 3 }



-- 802.1x Table

        iesDot1xPortTable OBJECT-TYPE
        SYNTAX	SEQUENCE OF IesDot1xPortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        	"This table includes the configuration of 802.1x."
        ::= { iesSysDot1xSetup 4 }

	iesDot1xPortEntry OBJECT-TYPE
        SYNTAX	IesDot1xPortEntry
        MAX-ACCESS	not-accessible
        STATUS	current
        DESCRIPTION
		"An entry in iesDot1xPortTable."
        INDEX   { ifIndex }
        ::= { iesDot1xPortTable 1 }

        IesDot1xPortEntry ::=
           SEQUENCE {
		iesDot1xPortEnable	  	INTEGER,
		iesDot1xPortControl	  	INTEGER,
		iesDot1xPortReAuthEnable	INTEGER,
		iesDot1xPortReAuthPeriod	INTEGER
           }

        iesDot1xPortEnable    OBJECT-TYPE
        SYNTAX  INTEGER {
				enable(1),
				disable(2)
			}
        MAX-ACCESS	read-write
        STATUS	current
        DESCRIPTION
                "The option defines if the port enables 802.1x
		settings."
         ::= { iesDot1xPortEntry 1 }

        iesDot1xPortControl    OBJECT-TYPE
        SYNTAX  INTEGER {
				auto(1),
				forceAuth(2),
				forceUnAuth(3)
			}
        MAX-ACCESS	read-write
        STATUS	current
        DESCRIPTION
                "The configuration defines the 802.1x port control
		type."
         ::= { iesDot1xPortEntry 2 }

	iesDot1xPortReAuthEnable    OBJECT-TYPE
        SYNTAX  INTEGER {
				on(1),
				off(2)
			}
        MAX-ACCESS	read-write
        STATUS	current
        DESCRIPTION
                "The option defines if the port enables 802.1x
		re-authentication."
         ::= { iesDot1xPortEntry 3 }

        iesDot1xPortReAuthPeriod    OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS	read-write
        STATUS	current
        DESCRIPTION
                "The configuration defines the 802.1x
		re-authentication period (seconds) for each port."
         ::= { iesDot1xPortEntry 4 }



-- Mac Filter

        iesMacFilterStatusTable OBJECT-TYPE
        SYNTAX	SEQUENCE OF IesMacFilterStatusEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        	"This table includes the status of mac filtering for each port."
        ::= { iesSysMacFilter 1 }

	iesMacFilterStatusEntry OBJECT-TYPE
        SYNTAX	IesMacFilterStatusEntry
        MAX-ACCESS	not-accessible
        STATUS	current
        DESCRIPTION
		"An entry in iesMacFilterStatusTable."
        INDEX   { ifIndex }
        ::= { iesMacFilterStatusTable 1 }

        IesMacFilterStatusEntry ::=
           SEQUENCE {
		iesMacFilterStatusEnable	INTEGER
           }

        iesMacFilterStatusEnable    OBJECT-TYPE
        SYNTAX  INTEGER {
				enableAccept(1),
				disable(2),
				enableDeny(3)
			}
        MAX-ACCESS	read-write
        STATUS	current
        DESCRIPTION
                "The option defines if the port enables mac filtering."
         ::= { iesMacFilterStatusEntry 1 }

	iesMaxNumberOfMacFilters OBJECT-TYPE
	SYNTAX 	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The max number of the mac filters in the system."
	::= { iesSysMacFilter 2 }

	iesMaxNumberOfMacFiltersPerPort OBJECT-TYPE
	SYNTAX 	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The max number of the mac filters for each port."
	::= { iesSysMacFilter 3 }

	iesCurrNumberOfMacFilters OBJECT-TYPE
	SYNTAX 	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The current number of the mac filters in the system."
	::= { iesSysMacFilter 4 }

	iesMacFilterTable OBJECT-TYPE
   	SYNTAX  SEQUENCE OF IesMacFilterEntry
    	MAX-ACCESS  not-accessible
    	STATUS  current
    	DESCRIPTION
                "A table that contains the mac filtering information."
    	::= { iesSysMacFilter 5 }

    	iesMacFilterEntry OBJECT-TYPE
        SYNTAX  IesMacFilterEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        	"The entry of iesMacFilterTable."
        INDEX  { ifIndex, iesMacFilterMacAddr }
        ::= { iesMacFilterTable 1 }

   	IesMacFilterEntry ::=
           SEQUENCE {
	    iesMacFilterMacAddr			PhysAddress,
	    iesMacFilterRowStatus		RowStatus
    	   }

        iesMacFilterMacAddr OBJECT-TYPE
        SYNTAX  PhysAddress
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        	"The mac address which can pass through the port."
        ::= { iesMacFilterEntry 1 }

	iesMacFilterRowStatus OBJECT-TYPE
	SYNTAX 	RowStatus
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The row status of the entry."
	::= { iesMacFilterEntry 2 }



-- Packet Filter

        iesPacketFilterTable OBJECT-TYPE
        SYNTAX	SEQUENCE OF IesPacketFilterEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        	"This table includes packet filtering for each port."
        ::= { iesSysPacketFilter 1 }

	iesPacketFilterEntry OBJECT-TYPE
        SYNTAX	IesPacketFilterEntry
        MAX-ACCESS	not-accessible
        STATUS	current
        DESCRIPTION
		"An entry in iesPacketFilterTable."
        INDEX   { ifIndex }
        ::= { iesPacketFilterTable 1 }

        IesPacketFilterEntry ::=
           SEQUENCE {
		iesPacketFilter	INTEGER
           }

        iesPacketFilter OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS	read-write
        STATUS	current
        DESCRIPTION
                "The packet filter. The semantic for each bit is:
                      	Bit 1: accept all
                      	Bit 2: accept PPPoE only
                      	Bit 3: reject ARP
                      	Bit 4: reject DHCP
			Bit 5: reject EAPOL
                      	Bit 6: reject PPPoE
			Bit 7: reject NetBIOS
			Bit 8: reject IGMP
			Bit 9: reject IP"
         ::= { iesPacketFilterEntry 1 }



-- Mac Count Filter

        iesMacCountFilterTable OBJECT-TYPE
        SYNTAX	SEQUENCE OF IesMacCountFilterEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        	"This table includes mac count filtering for each port."
        ::= { iesSysMacCountFilter 1 }

	iesMacCountFilterEntry OBJECT-TYPE
        SYNTAX	IesMacCountFilterEntry
        MAX-ACCESS	not-accessible
        STATUS	current
        DESCRIPTION
		"An entry in iesMacCountFilterTable."
        INDEX   { ifIndex }
        ::= { iesMacCountFilterTable 1 }

        IesMacCountFilterEntry ::=
           SEQUENCE {
		iesMacCountFilterStatus	INTEGER,
		iesMacCountFilterCount	INTEGER
           }

        iesMacCountFilterStatus OBJECT-TYPE
        SYNTAX  INTEGER {
				enable(1),
				disable(2)
			}
        MAX-ACCESS	read-write
        STATUS	current
        DESCRIPTION
                "The option defines if the port enables mac count filtering."
         ::= { iesMacCountFilterEntry 1 }

        iesMacCountFilterCount OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS	read-write
        STATUS	current
        DESCRIPTION
                "The number of mac addresses which can pass through the port."
         ::= { iesMacCountFilterEntry 2 }



-- Static Multicast Group

	iesMaxNumberOfMulticastGroups OBJECT-TYPE
	SYNTAX 	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The max number of static multicast groups in the system."
	::= { iesSysMulticastGroup 1 }

	iesMulticastGroupTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesMulticastGroupEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A table that contains static multicast group information."
        ::= { iesSysMulticastGroup 2 }

        iesMulticastGroupEntry OBJECT-TYPE
        SYNTAX  IesMulticastGroupEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"The entry of multicast group table."
        INDEX  { iesMulticastGroupMacAddr }
        ::= { iesMulticastGroupTable 1 }

        IesMulticastGroupEntry ::=
           SEQUENCE {
        	iesMulticastGroupMacAddr		PhysAddress,
        	iesMulticastGroupPorts			PortList,
		iesMulticastGroupRowStatus		RowStatus
           }

	iesMulticastGroupMacAddr OBJECT-TYPE
	SYNTAX PhysAddress
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"The multicast MAC address of the group."
	::= { iesMulticastGroupEntry 1 }

	iesMulticastGroupPorts OBJECT-TYPE
	SYNTAX PortList
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"The port list which specifies the ports joining the multicast group."
	::= { iesMulticastGroupEntry 2 }

	iesMulticastGroupRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"The row status of the multicast group entry."
	::= { iesMulticastGroupEntry 3 }


-- IGMP Filter
-- Obsoleted since Revision 3.0.0 at 2009/11/26 by maverick
-- Not used for R3.x and above.


	iesMaxNumberOfIgmpFilters OBJECT-TYPE
	SYNTAX 	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The max number of IGMP filters in the system."
	::= { iesSysIgmpFilter 1 }

	iesIgmpFilterTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesIgmpFilterEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A table that contains IGMP filters."
        ::= { iesSysIgmpFilter 2 }

        iesIgmpFilterEntry OBJECT-TYPE
        SYNTAX  IesIgmpFilterEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"The entry of IGMP filter table."
        INDEX  { iesIgmpFilterName, iesIgmpFilterIndex }
        ::= { iesIgmpFilterTable 1 }

        IesIgmpFilterEntry ::=
           SEQUENCE {
        	iesIgmpFilterName		OCTET STRING,
        	iesIgmpFilterIndex		INTEGER,
        	iesIgmpFilterStartIp		IpAddress,
        	iesIgmpFilterEndIp		IpAddress,
		iesIgmpFilterRowStatus		RowStatus
           }

	iesIgmpFilterName OBJECT-TYPE
	SYNTAX 	OCTET STRING (SIZE (1..31))
	MAX-ACCESS 	read-only
	STATUS 	current
	DESCRIPTION
		"The IGMP filter name."
	::= { iesIgmpFilterEntry 1 }

	iesIgmpFilterIndex OBJECT-TYPE
	SYNTAX 	INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The index which specifies the filter rule."
	::= { iesIgmpFilterEntry 2 }

	iesIgmpFilterStartIp OBJECT-TYPE
	SYNTAX 	IpAddress
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The start IP of the filter rule."
	::= { iesIgmpFilterEntry 3 }

	iesIgmpFilterEndIp OBJECT-TYPE
	SYNTAX 	IpAddress
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The end IP of the filter rule."
	::= { iesIgmpFilterEntry 4 }

	iesIgmpFilterRowStatus OBJECT-TYPE
	SYNTAX	RowStatus
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The row status of the IGMP filter entry."
	::= { iesIgmpFilterEntry 5 }

        iesIgmpFilterPortTable OBJECT-TYPE
        SYNTAX	SEQUENCE OF IesIgmpFilterPortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                 	"This table specifies the IGMP filter of the port."
        ::= { iesSysIgmpFilter 3 }

	iesIgmpFilterPortEntry OBJECT-TYPE
        SYNTAX	IesIgmpFilterPortEntry
        MAX-ACCESS	not-accessible
        STATUS	current
        DESCRIPTION    	"An entry in iesIgmpFilterPortTable."
        INDEX          	{ ifIndex }
        ::= { iesIgmpFilterPortTable 1 }

        IesIgmpFilterPortEntry ::=
           SEQUENCE {
		iesIgmpFilterPortFilter		OCTET STRING
           }

        iesIgmpFilterPortFilter OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE (1..31))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                      	"The IGMP filter of the port."
        ::= { iesIgmpFilterPortEntry 1 }


-- L2 Switch Configuration

	iesIGMPSnoopingEnabled OBJECT-TYPE
        SYNTAX INTEGER {
        			true(1),
        			false(2)
        		}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"A flag indicating whether IGMP snooping function is enabled or not."
	::= { iesL2SW 1 }

	iesManagementVLANId OBJECT-TYPE
	SYNTAX INTEGER
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"The VLAN ID for management."
	::= { iesL2SW 2 }

	iesMaxNumOfStaticVlans OBJECT-TYPE
	SYNTAX INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The maximum number of static VLANs supported by the system."
	::= { iesL2SW 3 }

	iesPortIsolationEnable OBJECT-TYPE
        SYNTAX INTEGER {
        			enable(1),
        			disable(2)
        		}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"A flag indicating whether VLAN port isolation function is enabled or not."
	::= { iesL2SW 6 }

	iesRSTPEnable OBJECT-TYPE
        SYNTAX INTEGER {
        			enable(1),
        			disable(2)
        		}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Enable/Disable RSTP."
	::= { iesL2SW 7 }

	iesSwitchMode OBJECT-TYPE
        SYNTAX INTEGER {
        			daisyChain(1),
        			standalone(2)
        		}
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Switch DSLAM's operatrion Mode."
	::= { iesL2SW 8 }


	-- Trunk Group

	iesMaxNumOfTrunkGroups OBJECT-TYPE
        SYNTAX  INTEGER
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                      	"The maximum number of trunk groups."
        ::= { iesL2SW 4}

	iesTrunkGroupTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IesTrunkGroupEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "A table that contains trunk group configuration."
        ::= { iesL2SW 5 }

        iesTrunkGroupEntry OBJECT-TYPE
        SYNTAX  IesTrunkGroupEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        		"The entry of trunk group table"
        INDEX  { iesTrunkGroupId }
        ::= { iesTrunkGroupTable 1 }

        IesTrunkGroupEntry ::=
           SEQUENCE {
        	iesTrunkGroupId		 	INTEGER,
        	iesTrunkGroupName		DisplayString,
		iesTrunkGroupPorts		PortList,
		iesTrunkGroupRowStatus		RowStatus
           }

	iesTrunkGroupId OBJECT-TYPE
	SYNTAX INTEGER
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The ID of the trunk group"
	::= { iesTrunkGroupEntry 1 }

	iesTrunkGroupName OBJECT-TYPE
	SYNTAX DisplayString
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The name of the trunk group"
	::= { iesTrunkGroupEntry 2 }

	iesTrunkGroupPorts OBJECT-TYPE
	SYNTAX 	PortList
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The port list of the trunk group"
	::= { iesTrunkGroupEntry 3 }

	iesTrunkGroupRowStatus OBJECT-TYPE
	SYNTAX 	RowStatus
	MAX-ACCESS	read-create
	STATUS	current
	DESCRIPTION
		"The row status of the trunk group entry"
	::= { iesTrunkGroupEntry 4 }


-- Enterprise specific traps

	reboot	TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
                        	iesProblemCause
                        }
	DESCRIPTION	"Send a message to the manager that the system is going to reboot.
	                 The variable is the reason why the system reboots."
	::= 1

	systemShutdown	TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
                        	iesProblemCause
                        }
	DESCRIPTION	"Send a message to the manager that the system is going to shutdown.
	                 The variable is the reason that causes the system to shutdown."
	::= 2

	overheat	TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
                        	iesChassisId,
                        	iesSlotId,
                        	iesSysTempIndex,
                        	iesSysTempCurValue
                        }
	DESCRIPTION	"Send a message to the manager that the system is overheated.
	                 The variable in the binding list is the current temperature in Celsius
	                 of the system."
	::= 3

	overheatOver	TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
                        	iesChassisId,
                        	iesSlotId,
                        	iesSysTempIndex,
                        	iesSysTempCurValue
                        }
	DESCRIPTION	"Send a message to the manager that the overheated condition is over.
	                 The variable in the binding list is the current temperature in Celsius
	                 of the system."
	::= 4

 	errLog		TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
                        	iesProblemCause
                        }
	DESCRIPTION	"Send a message to the manager that an error log is created in system.
			The variable in the binding list is the content of the error log."
	::= 5

	fanRpmLow	TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
                        	iesChassisId,
                        	iesFanRpmIndex,
                        	iesFanRpmCurValue
                        }
	DESCRIPTION	"Send a message to the manager that the rpm of the fan is too low.
	                 The variable in the binding list is the current rpm of the fan."
	::= 6

	fanRpmNormal	TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
                        	iesChassisId,
                        	iesFanRpmIndex,
                        	iesFanRpmCurValue
                        }
	DESCRIPTION	"Send a message to the manager that the low-rpm condition of the fan is over.
	                 The variable in the binding list is the current rpm of the fan."
	::= 7

	voltageOutOfRange	TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
                        	iesChassisId,
                        	iesSlotId,
                        	iesVoltageIndex,
                        	iesVoltageCurValue
                        }
	DESCRIPTION	"Send a message to the manager that the voltage of the system is out of range.
	                 The variable in the binding list is the current voltage in volt
	                 of the system."
	::= 8

	voltageNormal	TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
                        	iesChassisId,
                        	iesSlotId,
                        	iesVoltageIndex,
                        	iesVoltageCurValue
                        }
	DESCRIPTION	"Send a message to the manager that the low-voltage condition is over.
	                 The variable in the binding list is the current voltage in volt
	                 of the system."
	::= 9

	systemMaintenanceFailure	TRAP-TYPE
	ENTERPRISE	e5x110
        VARIABLES       {
        			iesChassisId,
                        	iesSlotId,
                        	iesProblemCause
                        }
	DESCRIPTION	"Send a message to the manager that the system maintence operation
	                 fail. The variable in the variable binding indicates the problem."
	::= 10

	configChange TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
      				iesChassisId,
      				iesSlotId,
      				iesProblemCause
      			}
      	DESCRIPTION	"This notification indicates that the configuration data of one module is changed."
      	::= 11

	moduleUp TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
      				iesChassisId,
      				iesSlotId
      			}
      	DESCRIPTION	"A moduleUp trap signifies that the sending
                	protocol entity recognizes that one of the
                	modules represented in the agent's
                	configuration has come up."
      	::= 12

	moduleDown TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
      				iesChassisId,
      				iesSlotId
      			}
      	DESCRIPTION	"A moduleDown trap signifies that the sending
                	protocol entity recognizes a failure in one of
                	the modules represented in the agent's
                	configuration."
      	::= 13

      	modulePlugIn TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
      				iesChassisId,
      				iesSlotId
      			}
      	DESCRIPTION	"A modulePlugIn trap signifies that the sending
                	protocol entity recognizes that one module is
                	plugged into the device."
      	::= 14

	modulePullOut TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
      				iesChassisId,
      				iesSlotId
      			}
      	DESCRIPTION	"A modulePullOut trap signifies that the sending
                	protocol entity recognizes one module is pulled out
                	from the device."
      	::= 15

      	powerDC48VAFailure TRAP-TYPE
	ENTERPRISE	e5x110
--	VARIABLES	{
--      			}
      	DESCRIPTION	"The trap signifies that the power supply of DC 48V at the
      	                 right side of main Chassis (front view) failed."
      	::= 16

      	powerDC48VANormal TRAP-TYPE
	ENTERPRISE	e5x110
--	VARIABLES	{
--     			}
      	DESCRIPTION	"The trap signifies that the power supply of DC 48V at the
      	                 right side of main Chassis (front view) is in normal state."
      	::= 17

      	powerDC48VBFailure TRAP-TYPE
	ENTERPRISE	e5x110
--	VARIABLES	{
--      			}
      	DESCRIPTION	"The trap signifies that the power supply of DC 48V at the
      	                 left side of main Chassis (front view) failed."
      	::= 18

      	powerDC48VBNormal TRAP-TYPE
	ENTERPRISE	e5x110
--	VARIABLES	{
--      			}
      	DESCRIPTION	"The trap signifies that the power supply of DC 48V at the
      	                 left side of main Chassis (front view) is in normal state."
      	::= 19

      	extAlarmInputTrigger TRAP-TYPE
	ENTERPRISE	e5x110
--	VARIABLES	{
--     			}
      	DESCRIPTION	"The trap signifies that the external alarm input of MSC card
      			is triggered."
      	::= 20

      	extAlarmInputRelease TRAP-TYPE
	ENTERPRISE	e5x110
--	VARIABLES	{
--      		}
      	DESCRIPTION	"The trap signifies that the external alarm input of MSC card
      			is released."
      	::= 21

      	thermalSensorFailure TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
      				iesChassisId,
      				iesSlotId
      			}
      	DESCRIPTION	"The trap signifies that the thermal sensor failed."
      	::= 22



      	mscSwitchOverOK TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
      				iesChassisId,
      				iesSlotId
      			}
      	DESCRIPTION	"The trap signifies that MSC card is switched over successfully. The value of
      	     		iesSlotId is the slot ID of the current working MSC."
      	::= 23


      	networkTopologyChange TRAP-TYPE
	ENTERPRISE	e5x110
--	VARIABLES	{
--      			}
      	DESCRIPTION	"The trap signifies the network topology is changed."
      	::= 24

      	adslAtucLof 	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-C Loss of Framing."
      	::= 25

      	adslAturLof 	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-R Loss of Framing."
      	::= 26

      	adslAtucLos 	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-C Loss of Signal."
      	::= 27

      	adslAturLos 	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-R Loss of Signal."
      	::= 28

      	adslAturLpr 	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-R Loss of Power."
      	::= 29

      	adslAtucLofClear	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-C Loss of Framing is cleared."
      	::= 30

      	adslAturLofClear 	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-R Loss of Framing is cleared."
      	::= 31

      	adslAtucLosClear 	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-C Loss of Signal is cleared."
      	::= 32

      	adslAturLosClear 	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-R Loss of Signal is cleared."
      	::= 33

      	adslAturLprClear 	TRAP-TYPE
	ENTERPRISE	e5x110
	VARIABLES	{
				ifIndex
      			}
      	DESCRIPTION	"The trap signifies ATU-R Loss of Power is cleared."
      	::= 34

END