path: root/MIBS/brocade/FOUNDRY-SN-IPX-MIB

FOUNDRY-SN-IPX-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,Counter32,Integer32
		FROM SNMPv2-SMI
	TEXTUAL-CONVENTION
		FROM SNMPv2-TC
	router
		FROM FOUNDRY-SN-ROOT-MIB
	PhysAddress
		FROM FOUNDRY-SN-SWITCH-GROUP-MIB;

snIpx MODULE-IDENTITY
    LAST-UPDATED "201006020000Z"  -- 04 June 2010
    ORGANIZATION "Brocade Communications Systems, Inc."
    CONTACT-INFO
             "Technical Support Center
              130 Holger Way,
              San Jose, CA  95134
              Email:  ipsupport@brocade.com
              Phone: 1-800-752-8061
              URL:  www.brocade.com"
    DESCRIPTION
             "Copyright 1996-2010 Brocade Communications Systems, Inc.
              All rights reserved.
              This Brocade Communications Systems SNMP Management Information Base Specification
              embodies Brocade Communications Systems' confidential and proprietary
              intellectual property. Brocade Communications Systems retains all
              title and ownership in the Specification, including any revisions.

              This Specification is supplied AS IS, and Brocade Communications Systems makes
              no warranty, either express or implied, as to the use,
              operation, condition, or performance of the specification, and any unintended
              consequence it may on the user environment."

    REVISION        "201006020000Z"  -- 04 June 2010
    DESCRIPTION
        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."

    REVISION     "200909300000Z" -- September 30, 2009
    DESCRIPTION
			"convert from SMIv1 to SMIv2"
   ::= { router 1 }
	-- textual conventions

	RtrStatus ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			RtrStatus Values
			"
		SYNTAX	INTEGER { disabled(0), enabled (1) }



	ClearStatus ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			Clear Status Values
			"
		SYNTAX	INTEGER { normal(0), clear(1) }


	PortIndex ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			The bits 0-7 = port number.
			The bits 8-15 = slot number (slot for chassis only).
			ve port format         bits 16-24 = 0x01, bits 0-15 = ve number
			loopback port format bits 16-24 = 0x02, bits 0-15= lb number
			"
		SYNTAX	Integer32(1..3900)


	Action ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			Represents a action value such as deny or permit.
			"
		SYNTAX	INTEGER { deny(0), permit(1) }

	 NetNumber::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			"
		SYNTAX	OCTET STRING (SIZE(4))

-- SECTION 2: MIB

-- Router IPX MIB

snIpxGen			OBJECT IDENTIFIER ::= { snIpx 1 }
snIpxCache			OBJECT IDENTIFIER ::= { snIpx 2 }
snIpxRoute			OBJECT IDENTIFIER ::= { snIpx 3 }
snIpxServer			OBJECT IDENTIFIER ::= { snIpx 4 }
snIpxFwdFilter		OBJECT IDENTIFIER ::= { snIpx 5 }
snIpxRipFilter		OBJECT IDENTIFIER ::= { snIpx 6 }
snIpxSapFilter		OBJECT IDENTIFIER ::= { snIpx 7 }
snIpxIfFwdAccess	OBJECT IDENTIFIER ::= { snIpx 8 }
snIpxIfRipAccess	OBJECT IDENTIFIER ::= { snIpx 9 }
snIpxIfSapAccess	OBJECT IDENTIFIER ::= { snIpx 10 }
snIpxPortAddr		OBJECT IDENTIFIER ::= { snIpx 11 }
snIpxPortCounters	OBJECT IDENTIFIER ::= { snIpx 12 }

-- IPX General MIBs

snIpxRoutingMode 	     OBJECT-TYPE
	SYNTAX	RtrStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enabled/Disabled System IPX Routing Mode status."
	::= { snIpxGen 1 }

snIpxNetBiosFilterMode		    OBJECT-TYPE
	SYNTAX	RtrStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enabled/Disabled NetBios Filter Mode status."
	::= { snIpxGen 2 }


snIpxClearCache 		OBJECT-TYPE
	SYNTAX  ClearStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"clear(1) will clear cache table."
	::= { snIpxGen 3 }

snIpxClearRoute 		OBJECT-TYPE
	SYNTAX  ClearStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"clear(1) will clear ipx route table."
	::= { snIpxGen 4 }

snIpxClearTrafficCnts		OBJECT-TYPE
	SYNTAX  ClearStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"clear(1) will clear ipx all traffic counters.
		 - snIpxRcvPktsCnt, snIpxFwdPktsCnt,
		   snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt,
		   snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt."
	::= { snIpxGen 5 }


snIpxRcvPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX incoming packets counter."
	::= { snIpxGen 6 }


snIpxTxPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX Outgoing packets counter."
	::= { snIpxGen 7 }


snIpxFwdPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX forwarding packets counter."
	::= { snIpxGen 8 }

snIpxRcvDropPktsCnt		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX receiving drop packets counter."
	::= { snIpxGen 9 }

snIpxRcvFiltPktsCnt		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX receiving filter packets counter."
	::= { snIpxGen 10 }

snIpxRipGblFiltList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(0..32))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"An IPX RIP Global Filter List. Null value indicates no filter list."
	::= { snIpxGen 11 }

snIpxRipFiltOnAllPort		OBJECT-TYPE
	SYNTAX	 INTEGER {
		valid(1),
		deleteAllInBound(2),
		deleteAllOutBound(3),
		addAllInBound(4),
		addAllOutBound(5)
	}
	MAX-ACCESS	read-write
	STATUS  current
	DESCRIPTION
	"Apply the IPX RIP Global filter list snIpxRipGblFiltList to
	 all interfaces. This object is used to add all RIP filter
	 lists and delete all RIP filter lists to/from all ports.
	 Prior to sending this command, snIpxRipGblFiltList must be ready.
	 The values that can be written are:
	 deleteAllInBound(2)...delete all in-bound filter lists from all ports.
	 deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
	 addAllInBound(4)......add all in-bound filter lists to all ports.
	 addAllOutBound(5).....add all out-bound filter lists to all ports.

	 If set operation is failed, then a SET with
	 value of (2)or(3) returns error 'GenError'.
	 Deleted(2)&(3) go away immediately.
	 The following values can be returned on reads:
	 noSuch(0)...no such operation yet.
	 valid(1)....set operation is done and is valid"

	::= { snIpxGen 12 }

snIpxSapGblFiltList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(0..32))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"An IPX SAP Global Filter List. Null value indicates no filter list"
	::= { snIpxGen 13 }


snIpxSapFiltOnAllPort		OBJECT-TYPE
	SYNTAX	 INTEGER {
		valid(1),
		deleteAllInBound(2),
		deleteAllOutBound(3),
		addAllInBound(4),
		addAllOutBound(5)
	}
	MAX-ACCESS	read-write
	STATUS  current
	DESCRIPTION
	"Apply the IPX SAP Global filter list snIpxSapGblFiltList to
	 all interfaces. This object is used to add all RIP filter
	 lists and delete all SAP filter lists to/from all ports.
	 Prior to sending this command, snIpxSapGblFiltList must be ready.
	 The values that can be written are:
	 deleteAllInBound(2)...delete all in-bound filter lists from all ports.
	 deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
	 addAllInBound(4)......add all in-bound filter lists to all ports.
	 addAllOutBound(5).....add all out-bound filter lists to all ports.

	 If set operation is failed, then a SET with
	 value of (2)or(3) returns error 'GenError'.
	 Deleted(2)&(3) go away immediately.
	 The following values can be returned on reads:
	 noSuch(0)...no such operation yet.
	 valid(1)....set operation is done and is valid"
	::= { snIpxGen 14 }

snIpxTxDropPktsCnt		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX transmitting drop packets counter."
	::= { snIpxGen 15 }

snIpxTxFiltPktsCnt		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX transmitting filter packets counter."
	::= { snIpxGen 16 }


-- IPX Cache table

snIpxCacheTable  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxCacheEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX Cache table."
	::= { snIpxCache 1 }

snIpxCacheEntry  OBJECT-TYPE
	SYNTAX	SnIpxCacheEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX Cache table."
	INDEX	{ snIpxCacheIndex }
	::= { snIpxCacheTable 1 }

SnIpxCacheEntry ::= SEQUENCE {
	snIpxCacheIndex
		Integer32,
	snIpxCacheNetNum
		NetNumber,
	snIpxCacheNode
		PhysAddress,
	snIpxCacheOutFilter
		RtrStatus,
	snIpxCacheEncap
		INTEGER,
	snIpxCachePort
		PortIndex
	}

snIpxCacheIndex  OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The table index for a IPX Cache entry."
	::= { snIpxCacheEntry 1 }


snIpxCacheNetNum  OBJECT-TYPE
	SYNTAX	NetNumber
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"Cache Network number."
	::= { snIpxCacheEntry 2 }

snIpxCacheNode  OBJECT-TYPE
	SYNTAX	PhysAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Cache Node Number."
	::= { snIpxCacheEntry 3 }

snIpxCacheOutFilter	OBJECT-TYPE
	SYNTAX	RtrStatus
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Cache Outbound Filter is ether disabled(0) or enabled(1)."
	::= { snIpxCacheEntry 4 }

snIpxCacheEncap  OBJECT-TYPE
	SYNTAX	 INTEGER {
		ethernetII(1),
		ethernet8022(2),
		ethernet8023(3),
		ethernetSnap(4)
	}
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"The IPX encapsulation frame type."
	::= { snIpxCacheEntry 5 }


snIpxCachePort  OBJECT-TYPE
	SYNTAX	PortIndex
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX Router Port number."
	::= { snIpxCacheEntry 6 }




-- IPX route table

snIpxRouteTable  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxRouteEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX route table."
	::= { snIpxRoute 1 }

snIpxRouteEntry  OBJECT-TYPE
	SYNTAX	SnIpxRouteEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX route table."
	INDEX	{ snIpxRouteIndex }
	::= { snIpxRouteTable 1 }

SnIpxRouteEntry ::= SEQUENCE {
	snIpxRouteIndex
		Integer32,
	snIpxDestNetNum
		NetNumber,
	snIpxFwdRouterNode
		PhysAddress,
	snIpxDestHopCnts
		Integer32,
	snIpxRouteMetric
		Integer32,
	snIpxDestPort
		Integer32
	}

snIpxRouteIndex  OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The table index for a IPX route entry."
	::= { snIpxRouteEntry 1 }

snIpxDestNetNum  OBJECT-TYPE
	SYNTAX	NetNumber
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"Destination Network number."
	::= { snIpxRouteEntry 2 }

snIpxFwdRouterNode  OBJECT-TYPE
	SYNTAX	PhysAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Forward Router Node Number."
	::= { snIpxRouteEntry 3 }

snIpxDestHopCnts  OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"Number of hops to reach the
		 destination."
	::= { snIpxRouteEntry 4 }

snIpxRouteMetric  OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"The metrics to next hop router."
	::= { snIpxRouteEntry 5 }

snIpxDestPort  OBJECT-TYPE
	SYNTAX Integer32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"The destination port."
	::= { snIpxRouteEntry 6 }


-- IPX Server table

snIpxServerTable  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxServerEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX Server table."
	::= { snIpxServer 1 }

snIpxServerEntry  OBJECT-TYPE
	SYNTAX	SnIpxServerEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX Server table."
	INDEX	{ snIpxServerIndex }
	::= { snIpxServerTable 1 }

SnIpxServerEntry ::= SEQUENCE {
	snIpxServerIndex
		Integer32,
	snIpxServerType
		Integer32,
	snIpxServerNetNum
		NetNumber,
	snIpxServerNode
		PhysAddress,
	snIpxServerSocket
		Integer32,
	snIpxServerHopCnts
		Integer32,
	snIpxServerName
		OCTET STRING
	}

snIpxServerIndex  OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The table index for a IPX Server entry."
	::= { snIpxServerEntry 1 }


snIpxServerType  OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX Server Type."
	::= { snIpxServerEntry 2 }

snIpxServerNetNum  OBJECT-TYPE
	SYNTAX	NetNumber
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"Server Network number."
	::= { snIpxServerEntry 3 }

snIpxServerNode  OBJECT-TYPE
	SYNTAX	PhysAddress
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Server Node Number."
	::= { snIpxServerEntry 4 }

snIpxServerSocket	OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"Server Socket Number."
	::= { snIpxServerEntry 5 }

snIpxServerHopCnts  OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"Number of intervening networks to reach the
		 server."
	::= { snIpxServerEntry 6 }


snIpxServerName  OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(0..47))
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX Server Name."
	::= { snIpxServerEntry 7 }



-- IPX Forward Filter table

snIpxFwdFilterTable	  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxFwdFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX Forward Filter table."
	::= { snIpxFwdFilter 1 }

snIpxFwdFilterEntry	  OBJECT-TYPE
	SYNTAX	SnIpxFwdFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX Forward Filter table."
	INDEX	{ snIpxFwdFilterIdx }
	::= { snIpxFwdFilterTable 1 }

SnIpxFwdFilterEntry ::= SEQUENCE {
	snIpxFwdFilterIdx
		Integer32,
	snIpxFwdFilterAction
		Action,
	snIpxFwdFilterSocket
		Integer32,
	snIpxFwdFilterSrcNet
		NetNumber,
	snIpxFwdFilterSrcNode
		PhysAddress,
	snIpxFwdFilterDestNet
		NetNumber,
	snIpxFwdFilterDestNode
		PhysAddress,
	snIpxFwdFilterRowStatus
		INTEGER
	}

snIpxFwdFilterIdx       OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The filter ID for a filter entry."
	::= { snIpxFwdFilterEntry 1 }

snIpxFwdFilterAction	  OBJECT-TYPE
	SYNTAX  Action
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Action to take if the ipx packet match
		with this filter."
	::= { snIpxFwdFilterEntry 2 }

snIpxFwdFilterSocket	OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"IPX Forward Filter Socket Number."
	::= { snIpxFwdFilterEntry 3 }

snIpxFwdFilterSrcNet	OBJECT-TYPE
	SYNTAX	NetNumber
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Source Network Number."
	::= { snIpxFwdFilterEntry 4 }

snIpxFwdFilterSrcNode  OBJECT-TYPE
	SYNTAX	PhysAddress
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Source Node Number."
	::= { snIpxFwdFilterEntry 5 }

snIpxFwdFilterDestNet	 OBJECT-TYPE
	SYNTAX	NetNumber
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Destination Network Number."
	::= { snIpxFwdFilterEntry 6 }

snIpxFwdFilterDestNode	OBJECT-TYPE
	SYNTAX	PhysAddress
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Destination Node Number."
	::= { snIpxFwdFilterEntry 7 }

snIpxFwdFilterRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
	}
	MAX-ACCESS	 read-write
	STATUS	 current
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxFwdFilterEntry 8 }



-- IPX RIP Filter table

snIpxRipFilterTable	  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxRipFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX RIP Filter table."
	::= { snIpxRipFilter 1 }

snIpxRipFilterEntry	  OBJECT-TYPE
	SYNTAX	SnIpxRipFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX RIP Filter table."
	INDEX	{ snIpxRipFilterId }
	::= { snIpxRipFilterTable 1 }

SnIpxRipFilterEntry ::= SEQUENCE {
	snIpxRipFilterId
		Integer32,
	snIpxRipFilterAction
		Action,
	snIpxRipFilterNet
		NetNumber,
	snIpxRipFilterMask
		NetNumber,
	snIpxRipFilterRowStatus
		INTEGER
	}

snIpxRipFilterId       OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The filter ID for a filter entry."
	::= { snIpxRipFilterEntry 1 }

snIpxRipFilterAction	  OBJECT-TYPE
	SYNTAX  Action
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Action to take if the ipx packet match
		with this filter."
	::= { snIpxRipFilterEntry 2 }

snIpxRipFilterNet    OBJECT-TYPE
	SYNTAX	NetNumber
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"IPX RIP Filter Network number."
	::= { snIpxRipFilterEntry 3 }

snIpxRipFilterMask    OBJECT-TYPE
	SYNTAX	NetNumber
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"IPX RIP Filter Network/Subnet Mask."
	::= { snIpxRipFilterEntry 4 }


snIpxRipFilterRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
	}
	MAX-ACCESS	 read-write
	STATUS	 current
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxRipFilterEntry 5 }



-- IPX SAP Filter table

snIpxSapFilterTable	  OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxSapFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX SAP Filter table."
	::= { snIpxSapFilter 1 }

snIpxSapFilterEntry	  OBJECT-TYPE
	SYNTAX	SnIpxSapFilterEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX SAP Filter table."
	INDEX	{ snIpxSapFilterId }
	::= { snIpxSapFilterTable 1 }

SnIpxSapFilterEntry ::= SEQUENCE {
	snIpxSapFilterId
		Integer32,
	snIpxSapFilterAction
		Action,
	snIpxSapFilterType
		Integer32,
	snIpxSapFilterName
		OCTET STRING,
	snIpxSapFilterRowStatus
		INTEGER
	}

snIpxSapFilterId       OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The filter ID for a filter entry."
	::= { snIpxSapFilterEntry 1 }

snIpxSapFilterAction	  OBJECT-TYPE
	SYNTAX  Action
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Action to take if the ipx packet match
		with this filter."
	::= { snIpxSapFilterEntry 2 }

snIpxSapFilterType    OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"IPX SAP Filter type to be matched."
	::= { snIpxSapFilterEntry 3 }

snIpxSapFilterName    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(0..47))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"IPX SAP Filter Name."
	::= { snIpxSapFilterEntry 4 }


snIpxSapFilterRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
	}
	MAX-ACCESS	 read-write
	STATUS	 current
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxSapFilterEntry 5 }


-- IPX IF Forward Access table

snIpxIfFwdAccessTable	    OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxIfFwdAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX IF Forward Access table."
	::= { snIpxIfFwdAccess 1 }

snIpxIfFwdAccessEntry	    OBJECT-TYPE
	SYNTAX	SnIpxIfFwdAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX Forward Access table."
	INDEX	{ snIpxIfFwdAccessPort, snIpxIfFwdAccessDir }
	::= { snIpxIfFwdAccessTable 1 }

SnIpxIfFwdAccessEntry ::= SEQUENCE {
	snIpxIfFwdAccessPort
		Integer32,
	snIpxIfFwdAccessDir
		INTEGER,
	snIpxIfFwdAccessFilterList
		OCTET STRING,
	snIpxIfFwdAccessRowStatus
		INTEGER
	}

snIpxIfFwdAccessPort	   OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The IPX interface to which the Forward Filter applies."
	::= { snIpxIfFwdAccessEntry 1 }

snIpxIfFwdAccessDir	 OBJECT-TYPE
	SYNTAX  INTEGER { in(1), out(2) }
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"The access direction of incoming packet filter
		or outgoing packet filter."
	::= { snIpxIfFwdAccessEntry 2 }

snIpxIfFwdAccessFilterList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(1..32))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"An IPX IF Forward Filter List."
	::= { snIpxIfFwdAccessEntry 3 }


snIpxIfFwdAccessRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
			modify(5)
	}
	MAX-ACCESS	 read-write
	STATUS	 current
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxIfFwdAccessEntry 4 }



-- IPX IF RIP Access table

snIpxIfRipAccessTable	    OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxIfRipAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX IF RIP Access table."
	::= { snIpxIfRipAccess 1 }

snIpxIfRipAccessEntry	    OBJECT-TYPE
	SYNTAX	SnIpxIfRipAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX Forward Access table."
	INDEX	{ snIpxIfRipAccessPort, snIpxIfRipAccessDir }
	::= { snIpxIfRipAccessTable 1 }

SnIpxIfRipAccessEntry ::= SEQUENCE {
	snIpxIfRipAccessPort
		Integer32,
	snIpxIfRipAccessDir
		INTEGER,
	snIpxIfRipAccessFilterList
		OCTET STRING,
	snIpxIfRipAccessRowStatus
		INTEGER
	}

snIpxIfRipAccessPort	   OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The IPX interface to which the RIP Filter applies."
	::= { snIpxIfRipAccessEntry 1 }

snIpxIfRipAccessDir	 OBJECT-TYPE
	SYNTAX  INTEGER { in(1), out(2) }
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"The access direction of incoming packet filter
		or outgoing packet filter."
	::= { snIpxIfRipAccessEntry 2 }

snIpxIfRipAccessFilterList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(1..32))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"An IPX IF RIP Access Filter List."
	::= { snIpxIfRipAccessEntry 3 }


snIpxIfRipAccessRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
	}
	MAX-ACCESS	 read-write
	STATUS	 current
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxIfRipAccessEntry 4 }


-- IPX IF SAP Access table

snIpxIfSapAccessTable	    OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxIfSapAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX IF RIP Access table."
	::= { snIpxIfSapAccess 1 }

snIpxIfSapAccessEntry	    OBJECT-TYPE
	SYNTAX	SnIpxIfSapAccessEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX Forward Access table."
	INDEX	{ snIpxIfSapAccessPort, snIpxIfSapAccessDir }
	::= { snIpxIfSapAccessTable 1 }

SnIpxIfSapAccessEntry ::= SEQUENCE {
	snIpxIfSapAccessPort
		Integer32,
	snIpxIfSapAccessDir
		INTEGER,
	snIpxIfSapAccessFilterList
		OCTET STRING,
	snIpxIfSapAccessRowStatus
		INTEGER
	}

snIpxIfSapAccessPort	   OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The IPX interface to which the SAP Filter applies."
	::= { snIpxIfSapAccessEntry 1 }

snIpxIfSapAccessDir	 OBJECT-TYPE
	SYNTAX  INTEGER { in(1), out(2) }
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"The access direction of incoming packet filter
		or outgoing packet filter."
	::= { snIpxIfSapAccessEntry 2 }

snIpxIfSapAccessFilterList    OBJECT-TYPE
	SYNTAX	OCTET STRING(SIZE(1..32))
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"An IPX IF SAP Access Filter List."
	::= { snIpxIfSapAccessEntry 3 }


snIpxIfSapAccessRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
	}
	MAX-ACCESS	 read-write
	STATUS	 current
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxIfSapAccessEntry 4 }


-- ipx interface address table

snIpxPortAddrTable	       OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxPortAddrEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX port address table."
	::= { snIpxPortAddr 1 }

snIpxPortAddrEntry	       OBJECT-TYPE
	SYNTAX	SnIpxPortAddrEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX Port Address table."
	INDEX	{ snIpxPortAddrPort, snIpxPortAddrEncap }
	::= { snIpxPortAddrTable 1 }

SnIpxPortAddrEntry ::= SEQUENCE {
	snIpxPortAddrPort
		PortIndex,
	snIpxPortAddrEncap
		INTEGER,
	snIpxPortAddrNetNum
		NetNumber,
	snIpxPortAddrRowStatus
		INTEGER,
	snIpxPortAddrNetBiosFilterMode
		RtrStatus
	}


snIpxPortAddrPort	       OBJECT-TYPE
	SYNTAX  PortIndex
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port index for port address entry."
	::= { snIpxPortAddrEntry 1 }

snIpxPortAddrEncap	      OBJECT-TYPE
	SYNTAX	 INTEGER {
		ethernet8022(1),
		ethernet8023(2),
		ethernetII(3),
		ethernetSnap(4)
	}
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The IPX encapsulation type.
		ethernet8022(1), ethernet8023(2),
		ethernetII(3),  ethernetSnap(4)
		Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
		a SNMP-SET error will be returned."
	::= { snIpxPortAddrEntry 2 }

snIpxPortAddrNetNum	       OBJECT-TYPE
	SYNTAX	NetNumber
	MAX-ACCESS	read-write
	STATUS  current
	DESCRIPTION
		"An unique Network number for the IPX interface port."
	::= { snIpxPortAddrEntry 3 }

snIpxPortAddrRowStatus OBJECT-TYPE
	SYNTAX	 INTEGER {
		invalid(1),
		valid(2),
		delete(3),
		create(4),
		modify(5)
	}
	MAX-ACCESS	 read-write
	STATUS	 current
	DESCRIPTION
	"This object is used to create and
	 delete row in the table and control
	 if they are used. The values
	 that can be written are:
	 delete(3)...deletes the row
	 create(4)...creates a new row
	 modify(5)...modifies an exsisting row

	 If the row exists, then a SET with
	 value of create(4) returns error
	 'badValue'. Deleted rows go away
	 immediately. The following values
	 can be returned on reads:
	 noSuch(0)...no such row
	 invalid(1)...Setting it to 'invalid' has the effect of
			  rendering it inoperative..
	 valid(2)....the row exists and is valid"
	::= { snIpxPortAddrEntry 4 }

snIpxPortAddrNetBiosFilterMode		    OBJECT-TYPE
	SYNTAX	RtrStatus
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"Enabled/Disabled NetBios Filter Mode status per Port Address entry."
	::= { snIpxPortAddrEntry 5 }


-- ipx port counters table

snIpxPortCountersTable	       OBJECT-TYPE
	SYNTAX	SEQUENCE OF SnIpxPortCountersEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"IPX port Counters table."
	::= { snIpxPortCounters 1 }

snIpxPortCountersEntry	       OBJECT-TYPE
	SYNTAX	SnIpxPortCountersEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"An entry in the IPX Port Counters table."
	INDEX	{ snIpxPortCountersPort }
	::= { snIpxPortCountersTable 1 }

SnIpxPortCountersEntry ::= SEQUENCE {
	snIpxPortCountersPort
		PortIndex,
	snIpxPortCountersRcvPktsCnt
		Counter32,
	snIpxPortCountersTxPktsCnt
		Counter32,
	snIpxPortCountersFwdPktsCnt
		Counter32,
	snIpxPortCountersRcvDropPktsCnt
		Counter32,
	snIpxPortCountersTxDropPktsCnt
		Counter32,
	snIpxPortCountersRcvFiltPktsCnt
		Counter32,
	snIpxPortCountersTxFiltPktsCnt
		Counter32
	}


snIpxPortCountersPort	       OBJECT-TYPE
	SYNTAX  PortIndex
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
		"The port index for port Counters entry."
	::= { snIpxPortCountersEntry 1 }

snIpxPortCountersRcvPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX incoming packets counter for the interface."
	::= { snIpxPortCountersEntry 2 }


snIpxPortCountersTxPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX Outgoing packets counter for the interface."
	::= { snIpxPortCountersEntry 3 }


snIpxPortCountersFwdPktsCnt 		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX forwarding packets counter for the interface."
	::= { snIpxPortCountersEntry 4 }

snIpxPortCountersRcvDropPktsCnt		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX receiving drop packets counter for the interface."
	::= { snIpxPortCountersEntry 5 }

snIpxPortCountersTxDropPktsCnt		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX transmitting drop packets counter for the interface."
	::= { snIpxPortCountersEntry 6 }

snIpxPortCountersRcvFiltPktsCnt		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX receiving filter packets counter for the interface."
	::= { snIpxPortCountersEntry 7 }

snIpxPortCountersTxFiltPktsCnt		OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS  current
	DESCRIPTION
		"IPX transmitting filter packets counter for the interface."
	::= { snIpxPortCountersEntry 8 }



END