path: root/MIBS/brocade/FOUNDRY-SN-IP-VRRP-MIB

FOUNDRY-SN-IP-VRRP-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,IpAddress, Counter32,Integer32
		FROM SNMPv2-SMI
	router
		FROM FOUNDRY-SN-ROOT-MIB
	TEXTUAL-CONVENTION
		FROM SNMPv2-TC
	ifIndex FROM IF-MIB;

snVrrp MODULE-IDENTITY
    LAST-UPDATED "201006020000Z"  -- 04 June 2010
    ORGANIZATION "Brocade Communications Systems, Inc."
    CONTACT-INFO
             "Technical Support Center
              130 Holger Way,
              San Jose, CA  95134
              Email:  ipsupport@brocade.com
              Phone: 1-800-752-8061
              URL:  www.brocade.com"
    DESCRIPTION
             "Copyright 1996-2010 Brocade Communications Systems, Inc.
              All rights reserved.
              This Brocade Communications Systems SNMP Management Information Base Specification
              embodies Brocade Communications Systems' confidential and proprietary
              intellectual property. Brocade Communications Systems retains all
              title and ownership in the Specification, including any revisions.

              This Specification is supplied AS IS, and Brocade Communications Systems makes
              no warranty, either express or implied, as to the use,
              operation, condition, or performance of the specification, and any unintended
              consequence it may on the user environment."

    REVISION        "201006020000Z"  -- 04 June 2010
    DESCRIPTION
        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."

    REVISION     "200909300000Z" -- September 30, 2009
    DESCRIPTION
			"convert from SMIv1 to SMIv2"
   ::= { router 12 }

	MacAddress ::= TEXTUAL-CONVENTION
		STATUS	  current
		DESCRIPTION
			"
			   This data type is used to model media addresses.  For many
			   types of media, this will be in a binary representation.
			   For example, an ethernet address would be represented as
			   a string of 6 octets.
			"
		SYNTAX	OCTET STRING (SIZE(6))

snVrrpGlobal 	OBJECT IDENTIFIER ::= { snVrrp 1 }
snVrrpIntf 		OBJECT IDENTIFIER ::= { snVrrp 2 }
snVrrpVirRtr 	OBJECT IDENTIFIER ::= { snVrrp 3 }
snVrrpIntf2 	OBJECT IDENTIFIER ::= { snVrrp 4 }
snVrrpVirRtr2 	OBJECT IDENTIFIER ::= { snVrrp 5 }


-- VRRP and VRRP-Extended MIBs

--  Section 1:	VRRP Global Variables

snVrrpGroupOperMode OBJECT-TYPE
	SYNTAX  INTEGER {
		disabled(0),
		enabled(1)
		}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
		"The VRRP is configured on this system
		 either enabled or disabled and the
		 default is disabled mode.
		 disabled(0)..........disable VRRP
		 enabled(1)...........activate VRRP"
	::= { snVrrpGlobal 1 }

snVrrpIfStateChangeTrap OBJECT-TYPE
	SYNTAX	INTEGER { disabled(0), enabled(1) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Indicates whether the SNMP agent process is
		permitted to generate vrrp and vrrpe interface state change
		traps."
	DEFVAL { enabled }
	::= { snVrrpGlobal 2 }

snVrrpIfMaxNumVridPerIntf OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Indicates the maximum number of VRID per interface."
	::= { snVrrpGlobal 3 }

snVrrpIfMaxNumVridPerSystem OBJECT-TYPE
	SYNTAX   Integer32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Indicates the maximum number of VRID per system."
	::= { snVrrpGlobal 4 }

snVrrpClearVrrpStat OBJECT-TYPE
	SYNTAX	INTEGER { normal(0), clear(1) }
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"Clear VRRP statistics command."
	::= { snVrrpGlobal 5 }

snVrrpGroupOperModeVrrpextended OBJECT-TYPE
	SYNTAX  INTEGER {   disabled(0), enabled(1) }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION "The VRRP_extended is configured on this system either enabled
		or disabled and the default is disabled mode.
		 disabled(0)..........disable VRRP extended
		 enabled(1)...........activate VRRP extended"
	::= { snVrrpGlobal 6 }


--  Section 2:	VRRP Interface Table
--  The following table is deprecated by snVrrpIf2Table, which is
--  ifIndex based table

snVrrpIfTable OBJECT-TYPE
	SYNTAX   SEQUENCE OF SnVrrpIfEntry
	MAX-ACCESS   not-accessible
	STATUS   deprecated
	DESCRIPTION
	   "The VRRP Interface Table describes the interfaces from
		the viewpoint of VRRP."
	::= { snVrrpIntf 1 }

	 snVrrpIfEntry OBJECT-TYPE
		 SYNTAX   SnVrrpIfEntry
		 MAX-ACCESS   not-accessible
		 STATUS   deprecated
		 DESCRIPTION
			"The VRRP Interface Entry describes one interface from
			the viewpoint of VRRP."
		 INDEX { snVrrpIfPort }
		 ::= { snVrrpIfTable 1 }

	 SnVrrpIfEntry ::=
		 SEQUENCE {
			 snVrrpIfPort
				Integer32,
			 snVrrpIfAuthType
				 INTEGER,
			 snVrrpIfAuthPassword
				 OCTET STRING,
			 snVrrpIfRxHeaderErrCnts
				 Counter32,
			 snVrrpIfRxAuthTypeErrCnts
				 Counter32,
			 snVrrpIfRxAuthPwdMismatchErrCnts
				 Counter32,
			 snVrrpIfRxVridErrCnts
				 Counter32
		 }


	snVrrpIfPort OBJECT-TYPE
		 SYNTAX   Integer32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The IP port of this VRRP interface."
		 ::= { snVrrpIfEntry 1 }

	snVrrpIfAuthType OBJECT-TYPE
		 SYNTAX   INTEGER {
						noAuth(0),
						simpleTextPasswd(1),
						ipAuthHeader(2)
						}
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"The authentication type of this interface."
		 ::= { snVrrpIfEntry 2 }

	snVrrpIfAuthPassword OBJECT-TYPE
		 SYNTAX	  OCTET STRING (SIZE (0..8))
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"The simple text password is allowed if only if
			the snVrrpIfAuthType type is simpleTextPasswd(1)."
		 ::= { snVrrpIfEntry 3 }

	snVrrpIfRxHeaderErrCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The received Header error counts in this interface."
		 ::= { snVrrpIfEntry 4 }

	snVrrpIfRxAuthTypeErrCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The received authentication type error counts in this interface."
		 ::= { snVrrpIfEntry 5 }

	snVrrpIfRxAuthPwdMismatchErrCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The received authentication password mismatched error counts in this interface."
		 ::= { snVrrpIfEntry 6 }

	snVrrpIfRxVridErrCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The received unfound VRID error counts in this interface."
		 ::= { snVrrpIfEntry 7 }

--  Section 3:	VRRP and VRRP-Extended Interface Table,
--              this is a modified vrrp/vrrpe interface table with ifIndex.
--              NOTE: Protocols VRRPE and VRRP-Extended are one and the same.

snVrrpIf2Table OBJECT-TYPE
	SYNTAX   SEQUENCE OF SnVrrpIf2Entry
	MAX-ACCESS   not-accessible
	STATUS   current
	DESCRIPTION
	   "The VRRP and VRRPE Interface Table describes the interfaces from
		the viewpoint of VRRP and VRRPE."
	::= { snVrrpIntf2 1 }

	 snVrrpIf2Entry OBJECT-TYPE
		 SYNTAX   SnVrrpIf2Entry
		 MAX-ACCESS   not-accessible
		 STATUS   current
		 DESCRIPTION
			"The VRRP and VRRPE Interface Entry describes one interface from
			the viewpoint of VRRP and VRRPE."
		 INDEX { ifIndex}
		 ::= { snVrrpIf2Table 1 }

	 SnVrrpIf2Entry ::=
		 SEQUENCE {
			 snVrrpIf2AuthType
				 INTEGER,
			 snVrrpIf2AuthPassword
				 OCTET STRING,
			 snVrrpIf2RxHeaderErrCnts
				 Counter32,
			 snVrrpIf2RxAuthTypeErrCnts
				 Counter32,
			 snVrrpIf2RxAuthPwdMismatchErrCnts
				 Counter32,
			 snVrrpIf2RxVridErrCnts
				 Counter32
		 }

	snVrrpIf2AuthType OBJECT-TYPE
		 SYNTAX   INTEGER {
						noAuth(0),
						simpleTextPasswd(1),
						ipAuthHeader(2)
						}
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"The authentication type of this interface."
		 ::= { snVrrpIf2Entry 1 }

	snVrrpIf2AuthPassword OBJECT-TYPE
		 SYNTAX	  OCTET STRING (SIZE (0..8))
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"The simple text password is allowed if only if
			the snVrrpIf2AuthType type is simpleTextPasswd(1)."
		 ::= { snVrrpIf2Entry 2 }

	snVrrpIf2RxHeaderErrCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The received Header error counts in this interface."
		 ::= { snVrrpIf2Entry 3 }

	snVrrpIf2RxAuthTypeErrCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The received authentication type error counts in this interface."
		 ::= { snVrrpIf2Entry 4 }

	snVrrpIf2RxAuthPwdMismatchErrCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The received authentication password mismatched error counts in this interface."
		 ::= { snVrrpIf2Entry 5 }

	snVrrpIf2RxVridErrCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The received unfound VRID error counts in this interface."
		 ::= { snVrrpIf2Entry 6 }

--  Section 4: VRRP virtual Router Configuration Table.

--      The VRRP (Virtual Router Redundancy Protocol) Virtual Router Table augments
--		with VRRP specific information.
--      The following table is deprecated by snVrrpVirRtr2Table, which is
--      ifIndex based table

snVrrpVirRtrTable OBJECT-TYPE
	SYNTAX   SEQUENCE OF SnVrrpVirRtrEntry
	MAX-ACCESS   not-accessible
	STATUS   deprecated
	DESCRIPTION
	   "The VRRP virtual router Entry describes one virtual router from
		the viewpoint of VRRP."
	::= { snVrrpVirRtr 1 }

	 snVrrpVirRtrEntry OBJECT-TYPE
		 SYNTAX   SnVrrpVirRtrEntry
		 MAX-ACCESS   not-accessible
		 STATUS   deprecated
		 DESCRIPTION
			"The VRRP virtual router Entry describes one virtual router from
			the viewpoint of VRRP."
		 INDEX { snVrrpVirRtrPort, snVrrpVirRtrId }
		 ::= { snVrrpVirRtrTable 1 }

	 SnVrrpVirRtrEntry ::=
		 SEQUENCE {
			 snVrrpVirRtrPort
				 Integer32,
			 snVrrpVirRtrId
				 INTEGER,
			 snVrrpVirRtrOwnership
				 INTEGER,
			 snVrrpVirRtrCfgPriority
				 INTEGER,
			 snVrrpVirRtrTrackPriority
				 INTEGER,
			 snVrrpVirRtrCurrPriority
				 INTEGER,
			 snVrrpVirRtrHelloInt
				 INTEGER,
			 snVrrpVirRtrDeadInt
				 INTEGER,
			 snVrrpVirRtrPreemptMode
				 INTEGER,
			 snVrrpVirRtrState
				 INTEGER,
			 snVrrpVirRtrActivate
				 INTEGER,
			 snVrrpVirRtrIpAddrMask
				 OCTET STRING,
			 snVrrpVirRtrTrackPortMask
				 OCTET STRING,
			 snVrrpVirRtrTrackVifMask
				 OCTET STRING,
			 snVrrpVirRtrRowStatus
				 INTEGER,
			 snVrrpVirRtrRxArpPktDropCnts
				 Counter32,
			 snVrrpVirRtrRxIpPktDropCnts
				 Counter32,
			 snVrrpVirRtrRxPortMismatchCnts
				 Counter32,
			 snVrrpVirRtrRxNumOfIpMismatchCnts
				 Counter32,
			 snVrrpVirRtrRxIpMismatchCnts
				 Counter32,
			 snVrrpVirRtrRxHelloIntMismatchCnts
				 Counter32,
			 snVrrpVirRtrRxPriorityZeroFromMasterCnts
				 Counter32,
			 snVrrpVirRtrRxHigherPriorityCnts
				 Counter32,
			 snVrrpVirRtrTransToMasterStateCnts
				 Counter32,
			 snVrrpVirRtrTransToBackupStateCnts
				 Counter32,
			 snVrrpVirRtrCurrDeadInt
				 Integer32,
			 snVrrpVirRtrTrackPortList
				 OCTET STRING,
			 snVrrpVirRtrTrackVifPortList
				 OCTET STRING
		 }


	snVrrpVirRtrPort OBJECT-TYPE
		 SYNTAX   Integer32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The IP port of this VRRP interface."
		 ::= { snVrrpVirRtrEntry 1 }

	snVrrpVirRtrId OBJECT-TYPE
		 SYNTAX   INTEGER (1..255)
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"One of the virtual router ID of this VRRP interface."
		 ::= { snVrrpVirRtrEntry 2 }

	snVrrpVirRtrOwnership OBJECT-TYPE
		 SYNTAX   INTEGER {
					incomplete(0),
					owner(1),
					backup(2)
					}
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"The ownership of this VRRP router interface
			can be set either owner(1) or backup(2).
			VirRtr SNMP-GET returns incomplete(0), it means
			no IP address has assigned to this VRRP router interface."
		 ::= { snVrrpVirRtrEntry 3 }

	 snVrrpVirRtrCfgPriority OBJECT-TYPE
		 SYNTAX   INTEGER (3..254)
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"The higher the number the higher the priority is.
			This parameter decides which backup router should becomes
			the Active Router for the interface.  A backup Router with
			higher priority selected to becomes the Active Router.
			Therefore, this Object can be set if only if snVrrpVirRtrOwnership
			is set to backup(2)."
		 DEFVAL { 100 }
		 ::= { snVrrpVirRtrEntry 4 }

	 snVrrpVirRtrTrackPriority OBJECT-TYPE
		 SYNTAX   INTEGER (1..254)
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"The higher the number the higher the priority is.
			after this object is configured, the snVrrpVirRtrCurrPriority
			of this interface will be adjusted dynamically with this
			track priority when the Track Port states first
			changes from UP to DOWN."
		 ::= { snVrrpVirRtrEntry 5 }

	 snVrrpVirRtrCurrPriority OBJECT-TYPE
		 SYNTAX   INTEGER (1..254)
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The higher the number the higher the priority is.
			This object will be adjusted dynamically with the
			track priority when the Track Port states first
			changes from UP to DOWN."
		 ::= { snVrrpVirRtrEntry 6 }

	 snVrrpVirRtrHelloInt OBJECT-TYPE
		 SYNTAX   INTEGER (1..84)
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"Time interval between advertisements (seconds)."
		 DEFVAL { 1 }
		 ::= { snVrrpVirRtrEntry 7 }

	 snVrrpVirRtrDeadInt OBJECT-TYPE
		 SYNTAX   INTEGER (1..84)
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"Dead interval (seconds)."
		 DEFVAL { 1 }
		 ::= { snVrrpVirRtrEntry 8 }

	 snVrrpVirRtrPreemptMode OBJECT-TYPE
		 SYNTAX   INTEGER { disabled(0), enabled(1) }
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"This mode controls whether a higher priority Backup router
			preempts a lower priority Master.  The mode with enabled(1)
			allow preemption and disabled(0) prohibit preemption."
		 DEFVAL { enabled }
		 ::= { snVrrpVirRtrEntry 9 }

	 snVrrpVirRtrState OBJECT-TYPE
		 SYNTAX   INTEGER {
					init(0),
					master(1),
					backup(2)
				  }
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"This object specifies the VRRP Router's interface state as:
			init(0)...initialization state.
			master(1)...master state.
			backup(2)...backup state."
		 ::= { snVrrpVirRtrEntry 10 }

	 snVrrpVirRtrActivate OBJECT-TYPE
		 SYNTAX   INTEGER {
					disabled(0),
					enabled(1)
				  }
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"This object specifies the VRRP Router's activate command as:
			disabled(0)...deactivate this VRRP Router.
			enabled(1)....activate this VRRP Router."
		 ::= { snVrrpVirRtrEntry 11 }

	snVrrpVirRtrIpAddrMask OBJECT-TYPE
		 SYNTAX  OCTET STRING (SIZE(64))
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"The numbers of IP Addresses of this virtual router of this interface."
		 ::= { snVrrpVirRtrEntry 12 }

	 snVrrpVirRtrTrackPortMask OBJECT-TYPE
		 SYNTAX  OCTET STRING (SIZE(4..32))
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"This object specifies the identity of the physical port
			whose state is to be monitored.  Each bit is a port of
			the system. Default value is 0.  VirRtr this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
			The interface's Preference Level is reduced by value of
			Preference Level parameter when the Track Port states first
			changes from UP to DOWN.  When the Track Port next comes up
			the interface's Preference Level is increased by the amount
			specified by the Preference Level.
			The Chassis/Stackable router VRRP Track port membership.
			The size of the OCTET STRING for Chassis is 32.
			The size of the OCTET STRING for Stackable is 4.
			(It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)"
		 ::= { snVrrpVirRtrEntry 13 }

	 snVrrpVirRtrTrackVifMask OBJECT-TYPE
		 SYNTAX  OCTET STRING (SIZE(4..512))
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"This object specifies the identity of the virtual interface
			whose state is to be monitored.  Each bit is a port of
			the system. Default value is 0.  VirRtr this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
			The interface's Preference Level is reduced by value of
			Preference Level parameter when the Track Port states first
			changes from UP to DOWN.  When the Track Port next comes up
			the interface's Preference Level is increased by the amount
			specified by the Preference Level.
			The Chassis/Stackable router VRRP Track port membership
			The size of the OCTET STRING for Chassis is 8.
			The size of the OCTET STRING for Stackable is 4.
			(It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList)"
		 ::= { snVrrpVirRtrEntry 14 }

	 snVrrpVirRtrRowStatus OBJECT-TYPE
		 SYNTAX   INTEGER {
					invalid(1),
					valid(2),
					delete(3),
					create(4),
					modify(5)
				  }
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"This object is used to create and
			 delete row in the table and control
			 if they are used. The values
			 that can be written are:
			 delete(3)...deletes the row
			 create(4)...creates a new row
			 modify(5)...modifies an existing row

			 VirRtr the row exists, then a SET with
			 value of create(4) returns error
			 'badValue'. Deleted rows go away
			 immediately. The following values
			 can be returned on reads:
			 noSuch(0)...no such row
			 invalid(1)...Setting it to 'invalid' has the effect of
						  rendering it inoperative..
			 valid(2)....the row exists and is valid"
		 ::= { snVrrpVirRtrEntry 15 }

	 snVrrpVirRtrRxArpPktDropCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The received VRRP ARP Packet Drop Counts."
		 ::= { snVrrpVirRtrEntry 16 }

	 snVrrpVirRtrRxIpPktDropCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The received VRRP IP Packet Drop Counts."
		 ::= { snVrrpVirRtrEntry 17 }

	 snVrrpVirRtrRxPortMismatchCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The received VRRP Port mismatching Counts."
		 ::= { snVrrpVirRtrEntry 18 }

	 snVrrpVirRtrRxNumOfIpMismatchCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The received VRRP Number of IP Addresses mismatching Counts."
		 ::= { snVrrpVirRtrEntry 19 }

	 snVrrpVirRtrRxIpMismatchCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The received VRRP IP Address mismatching Counts."
		 ::= { snVrrpVirRtrEntry 20 }

	 snVrrpVirRtrRxHelloIntMismatchCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The counts of the virtual router interface with hello interval mismatch counts."
		 ::= { snVrrpVirRtrEntry 21 }

	 snVrrpVirRtrRxPriorityZeroFromMasterCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The counts of the virtual router interface with Priority zero from the master."
		 ::= { snVrrpVirRtrEntry 22 }

	 snVrrpVirRtrRxHigherPriorityCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The counts of the virtual router interface with higher Priority."
		 ::= { snVrrpVirRtrEntry 23 }

	 snVrrpVirRtrTransToMasterStateCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The counts of the virtual router interface transition to master state."
		 ::= { snVrrpVirRtrEntry 24 }

	 snVrrpVirRtrTransToBackupStateCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"The counts of the virtual router interface transition to backup state."
		 ::= { snVrrpVirRtrEntry 25 }

	 snVrrpVirRtrCurrDeadInt OBJECT-TYPE
		 SYNTAX   Integer32
		 MAX-ACCESS   read-only
		 STATUS   deprecated
		 DESCRIPTION
			"Current Dead interval (in 100 milliseconds)."
		 ::= { snVrrpVirRtrEntry 26 }

	 snVrrpVirRtrTrackPortList OBJECT-TYPE
		 SYNTAX  OCTET STRING
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"This object specifies the identity of the physical port
			whose state is to be monitored.  Each port index is a
			16-bit integer in big endian order. 8-bit is the slot
			number, the other 8-bit is the port number. Default value
			is 0 length octet string.  If this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
			The interface's Preference Level is reduced by value of
			Preference Level parameter when the Track Port states first
			changes from UP to DOWN.  When the Track Port next comes up
			the interface's Preference Level is increased by the amount
			specified by the Preference Level.
			The router VRRP physical track port membership."
		 ::= { snVrrpVirRtrEntry 27 }

	 snVrrpVirRtrTrackVifPortList OBJECT-TYPE
		 SYNTAX  OCTET STRING
		 MAX-ACCESS   read-write
		 STATUS   deprecated
		 DESCRIPTION
			"This object specifies the identity of the virtual interface
			whose state is to be monitored.  Each port index is a
			16-bit integer in big endian order.  Default value
			is 0 length octet string.  If this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
			The interface's Preference Level is reduced by value of
			Preference Level parameter when the Track Port states first
			changes from UP to DOWN.  When the Track Port next comes up
			the interface's Preference Level is increased by the amount
			specified by the Preference Level.
			The router VRRP virtual port track membership."
		 ::= { snVrrpVirRtrEntry 28 }


--  Section 5: VRRP and VRRPE Virtual Router Configuration Table,  ifIndex based

--      The VRRP(Virtual Router Redundancy Protocol, rfc 2338 based, made an
--      enhancement!) and VRRPE (Virtual Router Redundancy Protocol foundry extended)
--      configuration.
--      Added snVrrpVirRtr2CurrDeadInt, snVrrpVirRtr2AdvertiseBackup, SnVrrpVirRtr2VirtualMacAddr
--      SnVrrpVirRtr2IpAddrCount, SnVrrpVirRtr2MasterIpAddr as new objects
--      and deleted port masks objects and virtual interface track port list.

snVrrpVirRtr2Table OBJECT-TYPE
	SYNTAX   SEQUENCE OF SnVrrpVirRtr2Entry
	MAX-ACCESS   not-accessible
	STATUS   current
	DESCRIPTION
	   "The Vrrp and Vrrpe virtual router Entry describes one virtual router from
		the viewpoint of Vrrp and Vrrpe."
	::= { snVrrpVirRtr2 1 }

	 snVrrpVirRtr2Entry OBJECT-TYPE
		 SYNTAX   SnVrrpVirRtr2Entry
		 MAX-ACCESS   not-accessible
		 STATUS   current
		 DESCRIPTION
			"The Vrrp and Vrrpe virtual router Entry describes one virtual router from
			the viewpoint of Vrrp and Vrrpe."
		 INDEX { ifIndex, snVrrpVirRtr2Id }
		 ::= { snVrrpVirRtr2Table 1 }

	 SnVrrpVirRtr2Entry ::=
		 SEQUENCE {
			 snVrrpVirRtr2Id
				 INTEGER,
			 snVrrpVirRtr2Ownership
				 INTEGER,
			 snVrrpVirRtr2CfgPriority
				 INTEGER,
			 snVrrpVirRtr2TrackPriority
				 INTEGER,
			 snVrrpVirRtr2CurrPriority
				 INTEGER,
			 snVrrpVirRtr2HelloInt
				 INTEGER,
			 snVrrpVirRtr2DeadInt
				 INTEGER,
			 snVrrpVirRtr2PreemptMode
				 INTEGER,
			 snVrrpVirRtr2State
				 INTEGER,
			 snVrrpVirRtr2IpAddrMask
				 OCTET STRING,
			 snVrrpVirRtr2Activate
				 INTEGER,
			 snVrrpVirRtr2BackupInt
				 INTEGER,
			 snVrrpVirRtr2RowStatus
				 INTEGER,
			 snVrrpVirRtr2RxArpPktDropCnts
				 Counter32,
			 snVrrpVirRtr2RxIpPktDropCnts
				 Counter32,
			 snVrrpVirRtr2RxPortMismatchCnts
				 Counter32,
			 snVrrpVirRtr2RxNumOfIpMismatchCnts
				 Counter32,
			 snVrrpVirRtr2RxIpMismatchCnts
				 Counter32,
			 snVrrpVirRtr2RxHelloIntMismatchCnts
				 Counter32,
			 snVrrpVirRtr2RxPriorityZeroFromMasterCnts
				 Counter32,
			 snVrrpVirRtr2RxHigherPriorityCnts
				 Counter32,
			 snVrrpVirRtr2TransToMasterStateCnts
				 Counter32,
			 snVrrpVirRtr2TransToBackupStateCnts
				 Counter32,
			 snVrrpVirRtr2CurrDeadInt
				 Integer32,
			 snVrrpVirRtr2TrackPortList
				 OCTET STRING,
			 snVrrpVirRtr2AdvertiseBackup
				 INTEGER,
			 snVrrpVirRtr2MasterIpAddr
				 IpAddress,
			 snVrrpVirRtr2IpAddrCount
				 INTEGER,
			 snVrrpVirRtr2VirtualMacAddr
				 MacAddress
		 }

	snVrrpVirRtr2Id OBJECT-TYPE
		 SYNTAX   INTEGER (1..255)
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"One of the virtual router ID of this Vrrp and Vrrpe interface."
		 ::= { snVrrpVirRtr2Entry 1 }

	snVrrpVirRtr2Ownership OBJECT-TYPE
		 SYNTAX   INTEGER {
					incomplete(0),
					owner(1),
					backup(2)
					}
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"The ownership of this Vrrp router interface
			can be set either owner(1) or backup(2).
			VirRtr SNMP-GET returns incomplete(0), it means
			no IP address has assigned to this Vrrp router interface.
			vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0)."
		 ::= { snVrrpVirRtr2Entry 2 }

	 snVrrpVirRtr2CfgPriority OBJECT-TYPE
		 SYNTAX   INTEGER (0..255)
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
		 "This object specifies the priority to be used for the
		 virtual router master election process. Higher values imply
		 higher priority.

		 A priority of '0', although not settable, is sent by
		 the master router to indicate that this router has ceased
		 to participate in VRRP and a backup virtual router should
		 transition  to become a new master.

		 A priority of 255 is only for VRRP - owner. Not valid for number to
		 configure VRRPE."
		 DEFVAL { 100 }
		 ::= { snVrrpVirRtr2Entry 3 }

	 snVrrpVirRtr2TrackPriority OBJECT-TYPE
		 SYNTAX   INTEGER (1..254)
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"The higher the number the higher the priority is.
			After this object is configured, the snVrrpVirRtr2CurrPriority
			of this interface will be adjusted dynamically with this
			track priority when the Track Port states first
			changes from UP to DOWN."
		 ::= { snVrrpVirRtr2Entry 4 }

	 snVrrpVirRtr2CurrPriority OBJECT-TYPE
		 SYNTAX   INTEGER (1..254)
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The higher the number the higher the priority is.
			This object will be adjusted dynamically with the
			track priority when the Track Port states first
			changes from UP to DOWN."
		 ::= { snVrrpVirRtr2Entry 5 }

	 snVrrpVirRtr2HelloInt OBJECT-TYPE
		 SYNTAX   INTEGER (1..84)
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"Time interval between advertisements (seconds)."
		 DEFVAL { 1 }
		 ::= { snVrrpVirRtr2Entry 6 }

	 snVrrpVirRtr2DeadInt OBJECT-TYPE
		 SYNTAX   INTEGER (0..84)
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"Dead interval (seconds)."
		 DEFVAL { 1 }
		 ::= { snVrrpVirRtr2Entry 7 }

	 snVrrpVirRtr2PreemptMode OBJECT-TYPE
		 SYNTAX   INTEGER { disabled(0), enabled(1) }
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"This mode controls whether a higher priority Backup router
			preempts a lower priority Master.  The mode with enabled(1)
			allow preemption and disabled(0) prohibit preemption."
		 DEFVAL { enabled }
		 ::= { snVrrpVirRtr2Entry 8 }

	 snVrrpVirRtr2State OBJECT-TYPE
		 SYNTAX   INTEGER {
					init(0),
					master(1),
					backup(2)
				  }
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"This object specifies the Vrrp and vrrpe Router's interface state as:
			init(0)...initialization state.
			master(1)...master state.
			backup(2)...backup state."
		 ::= { snVrrpVirRtr2Entry 9}

	snVrrpVirRtr2IpAddrMask OBJECT-TYPE
		 SYNTAX  OCTET STRING (SIZE(4..64))
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"The numbers of IP Addresses of this virtual router of this interface."
		 ::= { snVrrpVirRtr2Entry 10 }

	 snVrrpVirRtr2Activate OBJECT-TYPE
		 SYNTAX   INTEGER {
					disabled(0),
					enabled(1)
				  }
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"This object specifies the Vrrp Router's activate command as:
			disabled(0)...deactivate this Vrrp and Vrrpe Routers.
			enabled(1)....activate this Vrrp and Vrrpe Routers."
		 ::= { snVrrpVirRtr2Entry 11 }

	 snVrrpVirRtr2BackupInt OBJECT-TYPE
		 SYNTAX   INTEGER (60..3600)
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"Time interval between backup routers hello message advertisements (seconds)."
		 DEFVAL { 60 }
		 ::= { snVrrpVirRtr2Entry 12 }

	snVrrpVirRtr2RowStatus OBJECT-TYPE
		 SYNTAX   INTEGER {
					invalid(1),
					valid(2),
					delete(3),
					create(4),
					modify(5)
				  }
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"This object is used to create and
			 delete row in the table and control
			 if they are used. The values
			 that can be written are:
			 delete(3)...deletes the row
			 create(4)...creates a new row
			 modify(5)...modifies an existing row

			 VirRtr the row exists, then a SET with
			 value of create(4) returns error
			 'badValue'. Deleted rows go away
			 immediately. The following values
			 can be returned on reads:
			 noSuch(0)...no such row
			 invalid(1)...Setting it to 'invalid' has the effect of
						  rendering it inoperative..
			 valid(2)....the row exists and is valid"
		 ::= { snVrrpVirRtr2Entry 13 }

	 snVrrpVirRtr2RxArpPktDropCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The received Vrrp and Vrrpe ARP Packet Drop Counts."
		 ::= { snVrrpVirRtr2Entry 14 }

	 snVrrpVirRtr2RxIpPktDropCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The received Vrrp and Vrrpe IP Packet Drop Counts."
		 ::= { snVrrpVirRtr2Entry 15 }

	 snVrrpVirRtr2RxPortMismatchCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The received Vrrp and Vrrpe Port mismatching Counts."
		 ::= { snVrrpVirRtr2Entry 16 }

	 snVrrpVirRtr2RxNumOfIpMismatchCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts."
		 ::= { snVrrpVirRtr2Entry 17 }

	 snVrrpVirRtr2RxIpMismatchCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The received Vrrp and Vrrpe IP Address mismatching Counts."
		 ::= { snVrrpVirRtr2Entry 18 }

	 snVrrpVirRtr2RxHelloIntMismatchCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The counts of the virtual router interface with hello interval mismatch counts."
		 ::= { snVrrpVirRtr2Entry 19 }

	 snVrrpVirRtr2RxPriorityZeroFromMasterCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The counts of the virtual router interface with Priority zero from the master."
		 ::= { snVrrpVirRtr2Entry 20 }

	 snVrrpVirRtr2RxHigherPriorityCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The counts of the virtual router interface with higher Priority."
		 ::= { snVrrpVirRtr2Entry 21 }

	 snVrrpVirRtr2TransToMasterStateCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The counts of the virtual router interface transition to master state."
		 ::= { snVrrpVirRtr2Entry 22 }

	 snVrrpVirRtr2TransToBackupStateCnts OBJECT-TYPE
		 SYNTAX   Counter32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"The counts of the virtual router interface transition to backup state."
		 ::= { snVrrpVirRtr2Entry 23 }

	 snVrrpVirRtr2CurrDeadInt OBJECT-TYPE
		 SYNTAX   Integer32
		 MAX-ACCESS   read-only
		 STATUS   current
		 DESCRIPTION
			"Current Dead interval (in 100 milliseconds)."
		 ::= { snVrrpVirRtr2Entry 24 }

	 snVrrpVirRtr2TrackPortList OBJECT-TYPE
		 SYNTAX  OCTET STRING
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"This object specifies the identity of the physical port and virtual ports
			whose state is to be monitored.  Each port index is
			an ifIndex, if there are consecutive 4 or more ifIndex then
			they will be encoded like below.
			Encoding and decoding scheme is range based:
			Each range prefix with 0000 (2 octets) where 0000 is not valid
			ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2
			octets of higher range ifIndex. Individual(non range) ones will be displayed as it is.
			Ex:
			port list: 0001..0005 0015 0032..0047
			Port list in PDU:  0000 0001 0005 000f 0000 0020 002f.
			If this object is configured
			then the Preference Level of this interface will be adjusted
			dynamically depending on the state of the Track Port.
			The interface's Preference Level is reduced by value of
			Preference Level parameter when the Track Port states first
			changes from UP to DOWN.  When the Track Port next comes up
			the interface's Preference Level is increased by the amount
			specified by the Preference Level.
			The router VRRP and VRRP-E physical track port membership."
		 ::= { snVrrpVirRtr2Entry 25 }

	 snVrrpVirRtr2AdvertiseBackup OBJECT-TYPE
		 SYNTAX   INTEGER { disabled(0), enabled(1) }
		 MAX-ACCESS   read-write
		 STATUS   current
		 DESCRIPTION
			"Set Advertise this backup router to master "
		 DEFVAL { disabled }
		 ::= { snVrrpVirRtr2Entry 26 }

	 snVrrpVirRtr2MasterIpAddr OBJECT-TYPE
		 SYNTAX       IpAddress
		 MAX-ACCESS       read-only
		 STATUS       current
		 DESCRIPTION
			 "The master router's real/virtual (primary) IP address. This is
			 the IP address listed as the source in VRRP and VRRPE advertisement
			 last received by this virtual router."
		 ::= { snVrrpVirRtr2Entry 27 }

	 snVrrpVirRtr2IpAddrCount OBJECT-TYPE
		 SYNTAX       INTEGER (0..255)
		 MAX-ACCESS       read-only
		 STATUS       current
		 DESCRIPTION
			 "The number of IP addresses that are associated with this
			 virtual router. This number is equal to the number of rows
			 in the vrrpAssoIpAddrTable that correspond to a given IF
			 index/VRID pair."
		 ::= { snVrrpVirRtr2Entry 28 }

	 snVrrpVirRtr2VirtualMacAddr OBJECT-TYPE
		 SYNTAX       MacAddress
		 MAX-ACCESS       read-only
		 STATUS       current
		 DESCRIPTION
			 "The virtual MAC address of the virtual router. Although this
			 object can be derived from the 'snVrrpVirRtr2VrId' object, it is
			 defined so that it is easily obtainable by a management
			 application and can be included in VRRP-related SNMP traps."
		 ::= { snVrrpVirRtr2Entry 29 }

END