path: root/MIBS/bktel/BKTEL-HFC862-BES-V01-MIB

--- ****************************************************************************
-- *
-- * Description:   Implements definitions for the BK-Ethernet-Switch-modules
-- *
-- * Copyright 2007 by BKtel communications GmbH
-- *
-- *
-- *     V.0.1 12.05.2006  M. Heldmann    first draft
-- *     V.0.2 04.10.2006  M. Heldmann    NESlotWriteValue expanded due to new 2G6 platform needs
-- *     V.1.0 11.05.2007  M. Heldmann    renamed this  module from "bkswitch" to "bkbes"
-- *                                      added a couple of parameters
-- *     V.1.1 11.07.2013  M. Heldmann    adjusted syntax of "CommonEntry" to remove MIB compiler warnings
-- *     V.1.2 05.09.2014  M. Heldmann    changed CommonModuleWidth and ConfigNESlotWrite STATUS to optional
-- ****************************************************************************

BKTEL-HFC862-BES-V01-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        experimental, enterprises, TimeTicks, IpAddress, Counter
                 FROM RFC1155-SMI
    OBJECT-TYPE
                 FROM RFC-1212
        TRAP-TYPE
                 FROM RFC-1215
        modules, DisplayString, TruthValue, PerceivedSeverityValue, NESlotValue, ModuleWidthValue
                 FROM   BKTEL-HFC862-BASE-MIB
    ;

    bes                 OBJECT IDENTIFIER ::= { modules 114 }
    besCommon           OBJECT IDENTIFIER ::= { bes 1 }
    besStates           OBJECT IDENTIFIER ::= { bes 2 }
    besConfiguration    OBJECT IDENTIFIER ::= { bes 3 }
    besControl          OBJECT IDENTIFIER ::= { bes 4 }
    besMeasuringValues  OBJECT IDENTIFIER ::= { bes 5 }
    besDisplay          OBJECT IDENTIFIER ::= { bes 6 }
    besDisplayPorts     OBJECT IDENTIFIER ::= { bes 56 }


--
-- Type definitions
--

    PortType ::= INTEGER
        {
        typeCopper(1),
        typeFiber(2)
        }

    PortLinkState ::= INTEGER
        {
        linkDown(1),
        linkUp(2)
        }

    PortStatus ::= INTEGER
        {
        statusUnknown(1),
        statusInit(2),
        statusValid(3),
        statusBusy(4),
        statusEmpty(5),
        statusInvalid(6),
        statusLossOfSignal(7)
        }

    PortDuplexMode ::= INTEGER
        {
        duplexFull(1),
        duplexHalf(2)
        }

    PortSpeed ::= INTEGER
        {
        speedUnknown(0),
        speed10Mbps(10),
        speed100Mbps(100),
        speed1000Mbps(1000)
        }

    PortFlowControl ::= INTEGER
        {
        flowControlDisabled(1),
        flowControlEnabled(2)
        }

    NESlotWriteValue ::= INTEGER (-1..99)


-- MibCompiler defs --
-- $idx$: besDisplayConfiguration
-- MibCompiler defs --


--*****************************************************************************************
-- BES (BK Ethernet Switch)
--*****************************************************************************************
-- besCommon group

    besCommonNumberOfModules OBJECT-TYPE
        SYNTAX  INTEGER(0..50)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION "Number of modules in table."
  ::= { besCommon 1 }

    besCommonTable OBJECT-TYPE
        SYNTAX SEQUENCE OF BesCommonEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION "The table contains all modules of the BES-type in the NE"
  ::= { besCommon 2 }

-- table of states entry(ro/rw)

    besCommonEntry OBJECT-TYPE
        SYNTAX BesCommonEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION "Common-Values for a module."
        INDEX { besNESlot }
  ::= { besCommonTable 1 }

-- the structure of the entry

    BesCommonEntry ::= SEQUENCE
    {
        besNESlot                      NESlotValue,
        besCommonType                  DisplayString,
        besCommonDescr                 DisplayString,
        besCommonFirmwareId            DisplayString,
        besCommonModuleWidth           ModuleWidthValue
    }

    besNESlot OBJECT-TYPE
        SYNTAX  NESlotValue
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
        "The slot number of the chassis for which this
        entry contains management information."
    ::= { besCommonEntry 1 }

    besCommonType OBJECT-TYPE
        SYNTAX  DisplayString  (SIZE(0..32))
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
        "The type of physical module. modSlotEmpty indicates
         an empty slot.  A Value of modSlotUnknown indicates
         that the type of module is unknown."
    ::= { besCommonEntry 2 }

    besCommonDescr OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
        "A textual description of the module.
        If not available, this Value should be
        set to a zero length string."
    ::= { besCommonEntry 3 }

    besCommonFirmwareId OBJECT-TYPE
        SYNTAX DisplayString (SIZE(0..32))
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "The firmware Id of the module."
    ::= { besCommonEntry 4 }

    besCommonModuleWidth OBJECT-TYPE
        SYNTAX ModuleWidthValue
        ACCESS read-only
        STATUS optional
        DESCRIPTION "The width of the module in multiples of slots (1, 2, ...)"
    ::= { besCommonEntry 5 }


--*****************************************************************************************
-- besMeasuringValues group

-- table of measuring Values

    besMeasuringValuesTable OBJECT-TYPE
        SYNTAX SEQUENCE OF BesMeasuringValuesEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION ""
   ::= { besMeasuringValues 1 }

-- table of measuring Values entry

    besMeasuringValuesEntry OBJECT-TYPE
        SYNTAX BesMeasuringValuesEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION "Common-Values for a module."
        INDEX { besNESlot }
  ::= { besMeasuringValuesTable 1 }

--  the structure of the entry

    BesMeasuringValuesEntry ::= SEQUENCE
    {
        besTemperatureLoLo             INTEGER,
        besTemperatureLo               INTEGER,
        besTemperatureValue            INTEGER,
        besTemperatureHi               INTEGER,
        besTemperatureHiHi             INTEGER,

        besInputVoltageLoLo            INTEGER,
        besInputVoltageLo              INTEGER,
        besInputVoltageValue           INTEGER,
        besInputVoltageHi              INTEGER,
        besInputVoltageHiHi            INTEGER
    }

-- *****
    besTemperatureLoLo OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Device temperature low alarm threshold in 0.1 celsius degrees."
    ::= { besMeasuringValuesEntry 1 }

    besTemperatureLo OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Device temperature low warning threshold in 0.1 celsius degrees."
    ::= { besMeasuringValuesEntry 2 }

    besTemperatureValue OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Device temperature in 0.1 celsius degrees."
    ::= { besMeasuringValuesEntry 3 }

    besTemperatureHi OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Device temperature high warning threshold in 0.1 celsius degrees."
    ::= { besMeasuringValuesEntry 4 }

    besTemperatureHiHi OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Device temperature high alarm threshold in 0.1 celsius degrees."
    ::= { besMeasuringValuesEntry 5 }

-- *****
    besInputVoltageLoLo OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "The input supply voltage low alarm threshold in steps of 0.1 Volts."
    ::= { besMeasuringValuesEntry 6 }

    besInputVoltageLo OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "The input supply voltage low warning threshold in steps of 0.1 Volts."
    ::= { besMeasuringValuesEntry 7 }

    besInputVoltageValue OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "The input supply voltage in steps of 0.1 Volts.
                     Input supply voltage nominal value, see 'besDisplayInputVoltageNominal'"
    ::= { besMeasuringValuesEntry 8 }

    besInputVoltageHi OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "The input supply voltage high warning threshold in steps of 0.1 Volts."
    ::= { besMeasuringValuesEntry 9 }

    besInputVoltageHiHi OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "The input supply voltage high alarm threshold in steps of 0.1 Volts."
    ::= { besMeasuringValuesEntry 10 }


--*****************************************************************************************
--  besStates group

-- Note: For every control OId there must be a correspondant alarm OId!

    besStatesTable OBJECT-TYPE
        SYNTAX SEQUENCE OF BesStatesEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION ""
    ::= { besStates 1 }

-- table of states entry(ro/rw)

    besStatesEntry OBJECT-TYPE
        SYNTAX BesStatesEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION "Alarms for a module."
        INDEX { besNESlot }
    ::= { besStatesTable 1 }

-- the structure of the entry

    BesStatesEntry ::= SEQUENCE
    {
        besStatesBootloader           PerceivedSeverityValue,
        besStatesCommLoss             PerceivedSeverityValue,
        besStatesTemperatureLow       PerceivedSeverityValue,
        besStatesTemperatureHigh      PerceivedSeverityValue,
        besStatesInputVoltageLow      PerceivedSeverityValue,
        besStatesInputVoltageHigh     PerceivedSeverityValue
    }

    besStatesBootloader OBJECT-TYPE
        SYNTAX PerceivedSeverityValue
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The device is running in bootloader mode
             without a legal application software."
    ::= { besStatesEntry 1 }

    besStatesCommLoss OBJECT-TYPE
        SYNTAX PerceivedSeverityValue
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The NEC has lost the connection to the device.
             Reason may be a removed or defective device.
             Note that this state is set by the NEC and not
             by the device"
    ::= { besStatesEntry 2 }

    besStatesTemperatureLow OBJECT-TYPE
        SYNTAX PerceivedSeverityValue
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Device temperature low"
    ::= { besStatesEntry 3 }

    besStatesTemperatureHigh OBJECT-TYPE
        SYNTAX PerceivedSeverityValue
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Device temperature high"
    ::= { besStatesEntry 4 }

    besStatesInputVoltageLow OBJECT-TYPE
        SYNTAX PerceivedSeverityValue
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Input supply voltage low"
    ::= { besStatesEntry 5 }

    besStatesInputVoltageHigh OBJECT-TYPE
        SYNTAX PerceivedSeverityValue
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Input supply voltage high"
    ::= { besStatesEntry 6 }


--*****************************************************************************************
--  besControl group

  besControlTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BesControlEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION ""
  ::= { besControl 1 }

-- table of control entry(ro/rw)

  besControlEntry OBJECT-TYPE
    SYNTAX BesControlEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION "Alarms for a module."
    INDEX { besNESlot }
  ::= { besControlTable 1 }

-- the structure of the entry

    BesControlEntry ::= SEQUENCE
    {
        besControlReset             TruthValue,
        besControlModuleLedBlink    TruthValue
    }

    besControlReset OBJECT-TYPE
        SYNTAX TruthValue
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION "Reset the module."
    ::= { besControlEntry 1 }

    besControlModuleLedBlink OBJECT-TYPE
        SYNTAX TruthValue
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION   "Writing this variable to true(1) lets the device's
        modul LED blink green for 10 seconds.
        Writing this variable to false(2) stbes blinking at once.
        This variable always returns false(2) on read requests"
    ::= { besControlEntry 2 }


--*****************************************************************************************
-- besConfiguration group

    besConfigurationTable OBJECT-TYPE
        SYNTAX SEQUENCE OF BesConfigurationEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION ""
    ::= { besConfiguration 1 }

-- table of configuration entry(ro/rw)

    besConfigurationEntry OBJECT-TYPE
        SYNTAX BesConfigurationEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION ""
        INDEX { besNESlot  }
    ::= { besConfigurationTable 1 }

-- the structure of the entry

    BesConfigurationEntry ::= SEQUENCE
    {
        besConfigNESlotWrite                    NESlotWriteValue,
        besConfigConfigurationIndex             INTEGER,
        besConfigConfiguration                  DisplayString
    }

-- Common part

    besConfigNESlotWrite OBJECT-TYPE
        SYNTAX NESlotWriteValue
        ACCESS read-write
        STATUS optional
        DESCRIPTION "By writing this variable a slot can be assigned
            for devices that dont support hardware slot detection.
            Reading '-1' means that the slot position is NOT writable."
    ::= { besConfigurationEntry 1 }

    besConfigConfigurationIndex OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION "Index of the active configuration (1..besDisplayNumberOfConfigs)"
    ::= { besConfigurationEntry 2 }

    besConfigConfiguration OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of the active configuration"
    ::= { besConfigurationEntry 3 }


--*****************************************************************************************
-- Display group

    besDisplayTable OBJECT-TYPE
        SYNTAX SEQUENCE OF BesDisplayEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION ""
    ::= { besDisplay 1 }

-- table of configuration entry(ro/rw)

    besDisplayEntry OBJECT-TYPE
        SYNTAX BesDisplayEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION ""
        INDEX { besNESlot  }
    ::= { besDisplayTable 1 }

-- the structure of the entry

    BesDisplayEntry ::= SEQUENCE
    {
        besDisplayNumberOfPorts             INTEGER,
        besDisplayInputVoltageNominal       INTEGER,

        besDisplayNumberOfConfigs           INTEGER,
        besDisplayConfiguration1            DisplayString,
        besDisplayConfiguration2            DisplayString,
        besDisplayConfiguration3            DisplayString,
        besDisplayConfiguration4            DisplayString,
        besDisplayConfiguration5            DisplayString,
        besDisplayConfiguration6            DisplayString,
        besDisplayConfiguration7            DisplayString,
        besDisplayConfiguration8            DisplayString,
        besDisplayConfiguration9            DisplayString,
        besDisplayConfiguration10           DisplayString,
        besDisplayConfiguration11           DisplayString,
        besDisplayConfiguration12           DisplayString,
        besDisplayConfiguration13           DisplayString,
        besDisplayConfiguration14           DisplayString,
        besDisplayConfiguration15           DisplayString,
        besDisplayConfiguration16           DisplayString

    }

    besDisplayNumberOfPorts OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "The number of ports"
    ::={ besDisplayEntry 1 }

    besDisplayInputVoltageNominal OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "The nominal value of input voltage in 0.1 V units."
    ::={ besDisplayEntry 2 }

    besDisplayNumberOfConfigs OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "The number of different configurations supplied"
    ::={ besDisplayEntry 3 }

    besDisplayConfiguration1 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #1"
    ::= { besDisplayEntry 4 }

    besDisplayConfiguration2 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #2"
    ::= { besDisplayEntry 5 }

    besDisplayConfiguration3 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #3"
    ::= { besDisplayEntry 6 }

    besDisplayConfiguration4 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #4"
    ::= { besDisplayEntry 7 }

    besDisplayConfiguration5 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #5"
    ::= { besDisplayEntry 8 }

    besDisplayConfiguration6 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #6"
    ::= { besDisplayEntry 9 }

    besDisplayConfiguration7 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #7"
    ::= { besDisplayEntry 10 }

    besDisplayConfiguration8 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #8"
    ::= { besDisplayEntry 11 }

    besDisplayConfiguration9 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #9"
    ::= { besDisplayEntry 12 }

    besDisplayConfiguration10 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #10"
    ::= { besDisplayEntry 13 }

    besDisplayConfiguration11 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #11"
    ::= { besDisplayEntry 14 }

    besDisplayConfiguration12 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #12"
    ::= { besDisplayEntry 15 }

    besDisplayConfiguration13 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #13"
    ::= { besDisplayEntry 16 }

    besDisplayConfiguration14 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #14"
    ::= { besDisplayEntry 17 }

    besDisplayConfiguration15 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #15"
    ::= { besDisplayEntry 18 }

    besDisplayConfiguration16 OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION "Description of configuration no. #16"
    ::= { besDisplayEntry 19 }


--*****************************************************************************************
-- DisplayPorts group

-- MibCompiler defs --
-- $suboids$: 56,1
-- MibCompiler defs --

    besDisplayPortsTable OBJECT-TYPE
        SYNTAX SEQUENCE OF BesDisplayPortsEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION ""
    ::= { besDisplayPorts 1 }

-- table of configuration entry(ro/rw)

    besDisplayPortsEntry OBJECT-TYPE
        SYNTAX BesDisplayPortsEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION ""
        INDEX { besNESlot, besDisplayPortsPortIndex }
    ::= { besDisplayPortsTable 1 }

-- the structure of the entry

    BesDisplayPortsEntry ::= SEQUENCE
    {
        besDisplayPortsPortIndex            INTEGER,
        besDisplayPortsPortName             DisplayString,
        besDisplayPortsType                 PortType,
        besDisplayPortsLinkState            PortLinkState,
        besDisplayPortsStatus               PortStatus,
        besDisplayPortsDuplexMode           PortDuplexMode,
        besDisplayPortsSpeed                PortSpeed,
        besDisplayPortsFlowControl          PortFlowControl,
        besDisplayPortsFiberTxDistance      INTEGER,
        besDisplayPortsFiberTxWavelen       INTEGER,
        besDisplayPortsFiberRxWavelenMin    INTEGER,
        besDisplayPortsFiberRxWavelenMax    INTEGER,
        besDisplayPortsFiberSfpData         DisplayString

    }

    besDisplayPortsPortIndex OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port index (1..besDisplayNumberOfPorts)"
    ::={ besDisplayPortsEntry 1 }

    besDisplayPortsPortName OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port name"
    ::={ besDisplayPortsEntry 2 }

    besDisplayPortsType OBJECT-TYPE
        SYNTAX  PortType
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port type"
    ::={ besDisplayPortsEntry 3 }

    besDisplayPortsLinkState OBJECT-TYPE
        SYNTAX  PortLinkState
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port link status"
    ::={ besDisplayPortsEntry 4 }

    besDisplayPortsStatus OBJECT-TYPE
        SYNTAX  PortStatus
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port status"
    ::={ besDisplayPortsEntry 5 }

    besDisplayPortsDuplexMode OBJECT-TYPE
        SYNTAX  PortDuplexMode
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port duplex mode"
    ::={ besDisplayPortsEntry 6 }

    besDisplayPortsSpeed OBJECT-TYPE
        SYNTAX  PortSpeed
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port speed"
    ::={ besDisplayPortsEntry 7 }

    besDisplayPortsFlowControl OBJECT-TYPE
        SYNTAX  PortFlowControl
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port speed"
    ::={ besDisplayPortsEntry 8 }

    besDisplayPortsFiberTxDistance OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port transmission distance in units of km (Fiber ports only)"
    ::={ besDisplayPortsEntry 9 }

    besDisplayPortsFiberTxWavelen OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port transmission wavelength in units of nm (Fiber ports only)"
    ::={ besDisplayPortsEntry 10 }

    besDisplayPortsFiberRxWavelenMin OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port minimum receive wavelength in units of nm (Fiber ports only)"
    ::={ besDisplayPortsEntry 11 }

    besDisplayPortsFiberRxWavelenMax OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port maximum receive wavelength in units of nm (Fiber ports only)"
    ::={ besDisplayPortsEntry 12 }

    besDisplayPortsFiberSfpData OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
            "Port SFP data text (Fiber ports only)"
    ::={ besDisplayPortsEntry 13 }



--*****************************************************************************************
END