path: root/MIBS/benuos/BENU-CHASSIS-MIB

BENU-CHASSIS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Integer32,Unsigned32,TimeTicks
    FROM SNMPv2-SMI
    ifIndex,ifDescr,ifType,ifAdminStatus,ifOperStatus
    FROM IF-MIB
     benuPlatform
    FROM BENU-PLATFORM-MIB
     DisplayString
    FROM SNMPv2-TC;


benuChassisMIB MODULE-IDENTITY
    LAST-UPDATED "201611180000Z" -- 18 November 2016
    ORGANIZATION "Benu Networks"
    CONTACT-INFO "Benu Networks Inc,
      300 Concord Road,
      Billerca MA 01821
      Email: support@benunets.com"
    DESCRIPTION
       "Initial creation MIB module for Benu Networks Chassis.
    Copyright (C) 2001, 2008 by Benu Networks, Inc.
    All rights reserved."

    REVISION      "201611180000Z" -- 18 November 2016
    DESCRIPTION
       "Added xMEG card type"

    REVISION      "201610140000Z" -- 14 October 2016
    DESCRIPTION
       "Changes for xMEG platform"

    REVISION      "201601260000Z" -- 26 January 2016
    DESCRIPTION
       "Added benuCardIfVirtualType"

    REVISION      "201510140000Z" -- 14 October 2015
    DESCRIPTION
       "Added benuPowerSupplyTable"

    REVISION      "201501270000Z" -- 27 January 2015
    DESCRIPTION
       "Updated benuChassisId from read-write to read-only.
       Also, updated the description appropriately."

    REVISION      "201501050000Z" -- 05 January 2015
    DESCRIPTION
       "Updated notification assignments to comply with standards (RFC 2578)."

    REVISION      "201411140000Z"  -- 14 November 2014
    DESCRIPTION
            "changed benuChassisNotifObjects type to  scalar (2 to 0)"

    REVISION      "201406270000Z"
    DESCRIPTION
       "Added new encapsulation column in Card interface table"
    REVISION      "201311250000Z"
    DESCRIPTION
            "Added Fan Table "

    REVISION "201212120000Z" -- 12 December 2012
    DESCRIPTION
       "Initial creation MIB module for Benu Networks Chassis"

    ::= { benuPlatform 1 }

benuChassisMIBObjects   OBJECT IDENTIFIER ::= { benuChassisMIB 1 }
benuChassisNotifObjects OBJECT IDENTIFIER ::= { benuChassisMIB 0 }
benuChassisNotifVariables  OBJECT IDENTIFIER ::= { benuChassisMIB 2 }

-- MIB contains five groups

benuChassisInfo        OBJECT IDENTIFIER ::= { benuChassisMIBObjects 1 }
benuCardInfo           OBJECT IDENTIFIER ::= { benuChassisMIBObjects 2 }
benuCardIfInfo         OBJECT IDENTIFIER ::= { benuChassisMIBObjects 3 }
benuSensorInfo         OBJECT IDENTIFIER ::= { benuChassisMIBObjects 4 }
benuChassisGeneralInfo OBJECT IDENTIFIER ::= { benuChassisMIBObjects 5 }
benuFanInfo            OBJECT IDENTIFIER ::= { benuChassisMIBObjects 6 }
benuPowerSupplyInfo    OBJECT IDENTIFIER ::= { benuChassisMIBObjects 7 }

    --
    -- chassis group information.
    --

benuChassisType OBJECT-TYPE
    SYNTAX  INTEGER {
        meg100(1),
        meg400(2),
        meg1200(3),
        meg50(4),
        xMEG100(5),
        xMEG10(6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Chassis type."
    ::= { benuChassisInfo 1 }

benuChassisHwVersion OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Chassis hardware revision level, or an empty
        string if unavailable."
    ::= { benuChassisInfo 2 }

benuChassisId OBJECT-TYPE   -- Serial Number
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Unique ID string. Defaults to chassis serial
        number if available, otherwise empty"
    ::= { benuChassisInfo 3 }

benuChassisNumOfSlots OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of slots in this chassis, or -1 
        if neither applicable nor determinable."
    ::= { benuChassisInfo 4 }


benuChassisPowerTrapEnable OBJECT-TYPE
    SYNTAX     INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object controls SNMP traps for chassis Power Failure. 
        If its value is set to enabled(1), then traps 
        are generated. If the value is disabled(2), then traps 
        are not generated.
        By default, this object has the value enabled(1).
        "
    DEFVAL { enabled }

    ::= { benuChassisInfo 5 }

benuChassisFanTrapEnable OBJECT-TYPE
    SYNTAX     INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object controls SNMP traps for chassis Fan Failure. 
        If its value is set to enabled(1), then traps 
        are generated. If the value is disabled(2), then traps 
        are not generated.
        By default, this object has the value enabled(1).
        "
    DEFVAL { enabled }

    ::= { benuChassisInfo 6 }

benuChassisSensorTrapEnable OBJECT-TYPE
    SYNTAX     INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object controls SNMP traps for chassis senor Failure. 
        If its value is set to enabled(1), then traps 
        are generated. If the value is disabled(2), then traps 
        are not generated.
        By default, this object has the value enabled(1).
        "
    DEFVAL { enabled }

    ::= { benuChassisInfo 7 }

benuSysUpTimeAtLastChassisChange OBJECT-TYPE
      SYNTAX      TimeTicks
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Time (in hundredths of a second) from the last 
           cold start to the last change in the chassis'
           configuration. This value will be updated
           whenever the chassis experiences a change
            in the count, type, or slot position of
            a card in cardTable."
      ::= { benuChassisInfo  8 }



--
--      The Benu Card Table
--

benuCardTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF BenuCardEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Chassis card table."
    ::= { benuCardInfo 1 }

benuCardEntry OBJECT-TYPE
    SYNTAX      BenuCardEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Chassis card table."
    INDEX { benuCardIndex }
    ::= { benuCardTable 1 }

BenuCardEntry ::= SEQUENCE {
        benuCardIndex               Unsigned32,
        benuCardType                INTEGER,
        benuCardDescr               DisplayString,
        benuCardSerial              DisplayString,
        benuCardPartNumber          DisplayString,
        benuCardHwVersion           DisplayString,
        benuCardSwVersion           DisplayString,
        benuCardSlotNumber          Integer32,
        benuCardRamSize             Integer32,
        benuCardPrimaryDiskSize     Integer32,
        benuCardSecondaryDiskSize   Integer32,
        benuCardOperStatus          INTEGER
}


benuCardIndex OBJECT-TYPE
    SYNTAX      Unsigned32(1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Index into cardTable (not physical chassis
        slot number)."
    ::= { benuCardEntry 1 }

benuCardType OBJECT-TYPE
    SYNTAX      INTEGER {
                     unknown(0),
                     rsm(1),
                     switchFabric(2),
                     shelfmgr(3),
                     seFP(4),
                     inputOutputCard(5),
                     switchMesh(6),
                     xmeg(7)
                    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Functional type of this card."
    ::= { benuCardEntry 2 }

benuCardDescr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Text description of this card."
    ::= { benuCardEntry 3 }

benuCardSerial OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The serial number of this card, or zero if
        unavailable."
    ::= { benuCardEntry 4 }

benuCardPartNumber OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The part number of this card, or an 
         empty string if unavailable."
    ::= { benuCardEntry 5 }

benuCardHwVersion OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Hardware revision level of this card, or an
        empty string if unavailable."
    ::= { benuCardEntry 6 }

benuCardSwVersion OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Version of the firmware or microcode
        installed on this card, or an empty string if
        unavailable."
    ::= { benuCardEntry 7 }

benuCardSlotNumber OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Slot number relative to the containing card or 
        chassis, or -1 if neither applicable nor 
        determinable."
    ::= { benuCardEntry 8 }

benuCardRamSize OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of kilobytes of DRAM.
         A value -1 means not available / not applicable
         A value  0 means internal error."
    ::= { benuCardEntry 9 }


benuCardPrimaryDiskSize OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of kilobytes of Disk Memory (SATA or Hard Disk).
         A value -1 means not available / not applicable.
         A value  0 means internal error."
    ::= { benuCardEntry 10 }

benuCardSecondaryDiskSize OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Number of kilobytes of Disk Memory (SATA or Hard Disk).
         A value -1 means not available / not applicable.
         A value  0 means internal error."
    ::= { benuCardEntry 11 }

benuCardOperStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    notSpecified(1), 
                    up(2),
                    down(3),
                    standby(4),
                    rom(5),
                    flash(6),
                    diag(7),
                    boot(8),
                    config(9)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The operational status of the card.
        cardOperStatus is up when a card is
        recognized by the device and is enabled for
        operation. cardOperStatus is down if the
        card is not recognized by the device, or if
        it is not enabled for operation.
        cardOperStatus is standby if the card is
        enabled and acting as a standby slave.
        Intermediate stages (rom,flash,diag,boot,config)
        are also exposed." 
    ::= { benuCardEntry 12 }


    --
    -- The card Interface table
    --

benuCardIfIndexTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF BenuCardIfIndexEntry
    MAX-ACCESS          not-accessible
    STATUS              current
    DESCRIPTION
        "Chassis card Interface table."
    ::= { benuCardIfInfo 1 }

benuCardIfIndexEntry OBJECT-TYPE
    SYNTAX      BenuCardIfIndexEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Chassis card table."
    INDEX { benuCardIfIndex }
    ::= { benuCardIfIndexTable 1 }

BenuCardIfIndexEntry ::= SEQUENCE {
        benuCardIfIndex              Unsigned32,
        benuCardIfName               DisplayString,
        benuCardIfPortNumber         Integer32,
        benuCardIfSlotNumber          Integer32,
        benuCardIfLinkUpDownEnable   INTEGER,
        benuCardIfPortType           INTEGER,
        benuCardIfBindName           DisplayString,
        benuCardIfEncapsulation      DisplayString,
        benuCardIfVirtualType        INTEGER
}


benuCardIfIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "matches RFC1213 ifTable IfIndex"
    ::= { benuCardIfIndexEntry 1 }

benuCardIfName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "matches RFC1213 ifXTable IfName"
    ::= { benuCardIfIndexEntry 2 }

benuCardIfPortNumber OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Chassis port number, unique per port on a 
        given card if available."
    ::= { benuCardIfIndexEntry 3 }

benuCardIfSlotNumber OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Physical slot number of the card in 
         the Chassis which contains this interface"
    ::= { benuCardIfIndexEntry 4 }


benuCardIfLinkUpDownEnable OBJECT-TYPE
    SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2) 
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "This enables and disables the sending of
        the proprietary notifications 'benuLinkUpTrap'
        and 'benuLinkDownTrap' that provide more 
        information than the standard link up and 
        link down notifications.  By default, these
        traps are disabled." 
    DEFVAL { disabled }
    ::= { benuCardIfIndexEntry 5 }

benuCardIfPortType OBJECT-TYPE
    SYNTAX      INTEGER { 
                                   none(0),
                                   ethernet(1),
                                   fastEthernet(2),
                                   gigaEthernet(3),
                                   tunnel(4),
                                   ipGre(5),
                                   vlan(6),
                                   l2tp(7),
                                   cable(8),
                                   bridge(9),
                                   ip(10),
                                   multiBind(11),
                                   p2p(12),
                                   loopback(13),
                                   multiBindLastResort(14),
                                   lag(15),
                                   max(16)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object is used to identify port types for
        a given card."
    ::= { benuCardIfIndexEntry 6 }


benuCardIfBindName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "interface name which is bound to this port . 
         This string will be empty if there is no interface 
         bind to this port "
    ::= { benuCardIfIndexEntry 7 }


benuCardIfEncapsulation OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "The encapsulation method used by the port."
    ::= { benuCardIfIndexEntry 8 }


benuCardIfVirtualType OBJECT-TYPE
    SYNTAX      INTEGER { 
                                   physical(1),
                                   virtual(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object is used to identify virtualized
        interfaces."
    ::= { benuCardIfIndexEntry 9 }



--        The Sensor Table

benuSensorTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF BenuSensorEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
        "Chassis card table."
       ::= { benuSensorInfo 1 }

benuSensorEntry OBJECT-TYPE
       SYNTAX      BenuSensorEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
        "Chassis card table."
       INDEX { benuSensorCardIndex , benuSensorIndex }
       ::= { benuSensorTable 1 }

BenuSensorEntry ::= SEQUENCE {
    benuSensorCardIndex   Unsigned32,
    benuSensorIndex       Unsigned32,
    benuSensorName        DisplayString,
    benuSensorType        INTEGER,
    benuSensorValue       Integer32,
    benuSensorMinThresh   Integer32,
    benuSensorMaxThresh   Integer32,
    benuSensorState       INTEGER,
    benuSensorId          Integer32
}


benuSensorCardIndex OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
       "cardIndex of the card in the Chassis cardTable
        which contains this sensor."
       ::= { benuSensorEntry 1 }
benuSensorIndex OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
       "Index into sensorTable."
       ::= { benuSensorEntry 2 }

benuSensorName OBJECT-TYPE
       SYNTAX      DisplayString
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "Name of the sensor."
       ::= { benuSensorEntry 3 }

benuSensorType OBJECT-TYPE
       SYNTAX      INTEGER {
                           other(0),
                           temparature(1),
                           voltage(2),
                           electicCurrent(3),
                           fan(4),
                           power(5)
                           }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION "Type of the sensor."
       ::= { benuSensorEntry 4 }

benuSensorValue OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "Current Value of this sensor.
        The unit types for different type of sensors:
        temparature -- celcius
        Fan         -- rpm
        Volatage    -- volts
        Electric Current -- amperes
        Power            -- watts "
       ::= { benuSensorEntry 5 } 

benuSensorMinThresh OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "Minimum threshold for this sensor."
       ::= { benuSensorEntry 6 } 

benuSensorMaxThresh OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "Maximum threshold for this sensor."
       ::= { benuSensorEntry 7 } 

benuSensorState OBJECT-TYPE
       SYNTAX      INTEGER {
                           other(0),
                           normal(1),
                           critical(2)
                           }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION "State  of the sensor."
       ::= { benuSensorEntry 8 }

benuSensorId       OBJECT-TYPE
       SYNTAX      Integer32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "Unique ID of the sensor."
       ::= { benuSensorEntry 9 } 

--        The Fan Table

benuFanTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF BenuFanEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
        "Chassis Fan table."
       ::= { benuFanInfo 1 }

benuFanEntry OBJECT-TYPE
       SYNTAX      BenuFanEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
        "Chassis card table."
       INDEX { benuFanCardIndex  }
       ::= { benuFanTable 1 }

BenuFanEntry ::= SEQUENCE {
    benuFanCardIndex   Unsigned32,
    benuFanMaxSpeed    Unsigned32,
    benuFanCurSpeed    Unsigned32,
    benuFanStatus      Integer32
}
benuFanCardIndex OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
       "cardIndex of the card in the Chassis cardTable
        which contains this Fan."
       ::= { benuFanEntry 1 }

benuFanMaxSpeed OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "Maximum expected speed of each Fan.
        This value is applicable to all Fans 
        in the card.
        Units : The value range is from 0 to 100"
       ::= { benuFanEntry 2 }

benuFanCurSpeed OBJECT-TYPE
       SYNTAX      Unsigned32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
       "Current speed of each Fan.
        This value is applicable to all Fans 
        in the card.
        Units : The value range is from 0 to 100
        and is less than or equal to benuFanMaxSpeed"
       ::= { benuFanEntry 3 }

benuFanStatus OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        " A value of -1 means Not available / Not applicable.
          The lower order 7 bits indicates status of 7 Fans.
          A bit value of one indicates FAN is non-operational.
          A bit value of zero indicates FAN is operational.
          Examples : 
          (a) Value of 1 ( 0000 0001 ) indicates FAN #1 is 
              non-operational.
          (b) Value of 9 ( 0000 1001 ) indicates FAN #1 and FAN #4 
              are non-operational.
          (c) Value of 73( 0100 1001 ) indicates FAN #1,FAN #4 and FAN #7
              are non-operational. "
    ::= { benuFanEntry 4 }

--        The PowerSupply Table

benuPowerSupplyTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF BenuPowerSupplyEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Benu power supply state information."
        ::= { benuPowerSupplyInfo 1 }

benuPowerSupplyEntry OBJECT-TYPE
        SYNTAX      BenuPowerSupplyEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Power supply table."
        INDEX { benuPowerSupplyIndex }
        ::= { benuPowerSupplyTable 1 }

BenuPowerSupplyEntry ::= SEQUENCE {
        benuPowerSupplyIndex    INTEGER,
        benuPowerSupplyName     DisplayString,
        benuPowerSupplyPresent  INTEGER,
        benuPowerSupplyType     INTEGER,
        benuPowerSupplyPowered  INTEGER
}

benuPowerSupplyIndex OBJECT-TYPE
        SYNTAX      INTEGER {
                        powerA(1),
                        powerB(2)
                    }
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object is used to identify the power supply."
        ::= { benuPowerSupplyEntry 1 }

benuPowerSupplyName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The name of the power supply."
        ::= { benuPowerSupplyEntry 2 }

benuPowerSupplyPresent OBJECT-TYPE
        SYNTAX      INTEGER {
                        yes(1),
                        no(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Indicates whether or not the power supply is installed in the chassis."
        ::= { benuPowerSupplyEntry 3 }

benuPowerSupplyType OBJECT-TYPE
        SYNTAX      INTEGER {
                        ac(1),
                        dc(2),
                        notApplicable(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Indicates the type of the power supply."
        ::= { benuPowerSupplyEntry 4 }

benuPowerSupplyPowered OBJECT-TYPE
        SYNTAX      INTEGER {
                        powered(1),
                        notPowered(2),
                        notApplicable(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Indicates whether or not the power supply is actively supplying power.
             The value of notApplicable(3) will show if the entry for benuPowerSupplyPresent is no(2)."
        ::= { benuPowerSupplyEntry 5 }


--  Chassis MIB General Info

benuSysUpTimeSinceLastConfigChange OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time (in hundredths of a second) since the last
        configuration change in the system."
    ::= { benuChassisGeneralInfo 1 }

-- Chassis MIB traps Definitions


benuChassisPowerFailureInfo OBJECT-TYPE
    SYNTAX  INTEGER {
                    powerFailureA(1),
                    powerFailureB(2),
                    powerRestoredA(3),
                    powerRestoredB(4)
     }
      MAX-ACCESS accessible-for-notify
      STATUS     obsolete
      DESCRIPTION
        "Indicates the location of the Power Failure."
      ::= { benuChassisNotifVariables 1 }

benuChassisPowerFailure NOTIFICATION-TYPE 
    OBJECTS { benuChassisPowerFailureCardInfo,
               benuChassisPowerFailureInfo
            } 
    STATUS obsolete
    DESCRIPTION
        "A chassisPowerFailureTrap is generated when a Power
        Failure is detected in the system"
    ::= { benuChassisNotifObjects 1 }

benuChassisFanFailureInfo OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS accessible-for-notify
    STATUS     current
    DESCRIPTION "Indicates the location of the Fan Failure."
    ::= { benuChassisNotifVariables 2 }

benuChassisFanFailureTrap NOTIFICATION-TYPE
    OBJECTS { benuChassisFanFailureInfo } 
    STATUS current
    DESCRIPTION
        "A chassisFanFailureTrap is generated when a Fan 
        Failure is detected in the system"
    ::= { benuChassisNotifObjects 2 }


benuLinkUpTrap NOTIFICATION-TYPE
    OBJECTS {
        ifIndex,
        ifDescr,
        ifType,
        ifAdminStatus,
        ifOperStatus
    }
    STATUS current
    DESCRIPTION
        "A proprietary Link Up Notification for all 
        interfaces. This notification contains more details 
        than the standard 'linkUp' notification in RFC 2863."
    ::= { benuChassisNotifObjects 3 }    

benuLinkDownTrap  NOTIFICATION-TYPE
    OBJECTS {
        ifIndex,
        ifDescr,
        ifType,
        ifAdminStatus, 
        ifOperStatus
    }
    STATUS    current
    DESCRIPTION
        "A proprietary Link Down Notification for all 
        interfaces. This notification contains more details 
        than the standard 'linkDown' notification in RFC 2863."
    ::= { benuChassisNotifObjects 4 }


benuChassisPowerFailureCardInfo OBJECT-TYPE
      SYNTAX  Unsigned32 
      MAX-ACCESS accessible-for-notify
      STATUS     obsolete
      DESCRIPTION
        "Indicates the  Card Index
         Card Index starts from #1. "
      ::= { benuChassisNotifVariables 3 }

benuSensorCritical NOTIFICATION-TYPE
    OBJECTS {
                benuSensorName,
                benuSensorType,
                benuSensorValue,
                benuSensorId
     }
     STATUS current
     DESCRIPTION
          "This notification signifies the transition
           of the sensor state from normal to critical."
     ::= { benuChassisNotifObjects 5 }

benuSensorNormal  NOTIFICATION-TYPE
    OBJECTS {
                benuSensorName,
                benuSensorType,
                benuSensorValue,
                benuSensorId
     }
     STATUS current
     DESCRIPTION
          "This notification signifies the transition
           of the sensor state from critical to normal."
     ::= { benuChassisNotifObjects 6 }

benuChassisPowerInfo OBJECT-TYPE
    SYNTAX  INTEGER {
                    powerSupplyA(1),
                    powerSupplyB(2)
     }
      MAX-ACCESS accessible-for-notify
      STATUS     current
      DESCRIPTION
        "Indicates the location of the Power Failure or recovery."
      ::= { benuChassisNotifVariables 4 }

benuChassisPowerFault NOTIFICATION-TYPE
    OBJECTS { benuChassisPowerInfo
            }
    STATUS current
    DESCRIPTION
        "A chassisPowerFaultTrap is generated when a Power
        Failure is detected in the system"
    ::= { benuChassisNotifObjects 7 }

benuChassisPowerRecovery NOTIFICATION-TYPE
    OBJECTS { benuChassisPowerInfo
            }
    STATUS current
    DESCRIPTION
        "A chassisPowerRecoveryTrap is generated when a failed
        Power supply recovery is detected in the system"
    ::= { benuChassisNotifObjects 8 }

benuChassisPowerPresent NOTIFICATION-TYPE
    OBJECTS { benuChassisPowerInfo
            }
    STATUS current
    DESCRIPTION
        "A chassisPowerPresentTrap is generated when a 
        redundant Power supply is inserted in the system"
    ::= { benuChassisNotifObjects 9 }

benuChassisPowerAbsent NOTIFICATION-TYPE
    OBJECTS { benuChassisPowerInfo
            }
    STATUS current
    DESCRIPTION
        "A chassisPowerAbsentTrap is generated when a 
        redundant Power supply is removed from the system"
    ::= { benuChassisNotifObjects 10 }

END