path: root/MIBS/alteonos/ALTEON-TS-PHYSICAL-MIB

-- COPYRIGHT NOTICE
-- Copyright (c) Alteon WebSystems, Inc. 2001
-- All rights reserved
-- 
-- HISTORY
-- $Log: tigonPhysical.mib,v $
-- Revision 1.1.1.1  2004/11/01 16:55:42  maxbaker
-- initial import
--
-- Revision ge_rrekha/7 2001/11/08 19:29:40 rrekha
-- 	Added MIB objects vlanCurCfgStg/vlanNewCfgStg.
-- 
-- Revision ge_rrekha/5 2001/11/07 00:28:10 rrekha
-- 	Removed the range on agPortCurCfgBwmContract/agPortNewCfgBwmContract
-- 	and vlanCurCfgBwmContract/vlanNewCfgBwmContract since the size
-- 	of the table can vary. This range should be obtained from the
-- 	the max table size.
-- 
-- Revision ge_rrekha/3 2001/10/18 18:06:43 rrekha
-- 	Marked the old port mirroring MIBs as obsolete since they are 
-- 	no longer supported.
-- 
-- Revision test_smiao/13 2001/10/12 02:42:04 smiao
-- 	Added LinkTrap and broadcast pkt stats for port.
-- 
-- Revision test_smiao/11 2001/10/11 23:54:41 smiao
-- 	Added physical interface info/stats in port table.
-- 
-- Revision test_smiao/9 2001/09/18 18:08:02 smiao
-- 	Implemented VLAN bit map for spanning tree group.
-- 
-- Revision test_smiao/7 2001/08/31 18:14:15 smiao
-- 	Implemented add/remove vlans for spanning tree groups.
-- 
-- Revision test_smiao/5 2001/07/13 23:06:27 smiao
-- 	Initial checked in for multiple spanning tree in SNMP and webUI.
-- 
-- Revision genie_rekha/10 2001/07/12 19:29:11 rekha
-- 	SNMP support for port-based and vlan-based port mirroring.
-- 
-- Revision genie_rekha/8 2001/05/29 22:54:39 rekha
-- 	Removed 'other' from most of the enumerations.
-- 
-- Revision test_smiao/3 2001/05/09 22:39:23 smiao
-- 	Added operational command for port mirroring in webUI and SNMP.
-- 
-- Revision work_rmundhra/7 2001/03/06 23:09:26 rmundhra
-- 	Removed Mib entry agCurCfgPortLinkTrap
-- 	and agNewCfgPortLinkTrap as we can configure via
-- 	ifLinkUpDownTrapEnable defined in rfc1573.mib.
-- 
-- Revision work_rmundhra/4 2001/03/01 17:16:43 rmundhra
-- 	Added SNMP support for configuring LinkTrap enabled/disabled.
-- 
-- Revision genie_rekha/5 2001/02/16 00:12:49 rekha
-- 	Fixed 10218: Added MIB object for port mirroring timeout.
-- 
-- Revision genie_rekha/2 2001/02/08 18:18:03 rekha
-- 	As part of the code cleanup split the Tigon MIB into smaller
-- 	modules. Instead of altswitch.mib these 5 new modules should be
-- 	used.
-- 
-- $EndLog$
-- 
-- Version 10.0.x
--

ALTEON-TS-PHYSICAL-MIB DEFINITIONS ::= BEGIN

IMPORTS
    IpAddress, Counter, Gauge, TimeTicks 
        FROM RFC1155-SMI
    OBJECT-TYPE
        FROM RFC-1212
    PhysAddress, DisplayString
        FROM RFC1213-MIB
    switch 
        FROM ALTEON-ROOT-MIB
    stats, information, agent, operCmds
        FROM ALTEON-TIGON-SWITCH-MIB;

vlans             OBJECT IDENTIFIER ::= { switch 4 }
portmirroring     OBJECT IDENTIFIER ::= { switch 6 }
trunkgroup        OBJECT IDENTIFIER ::= { switch 7 }
spannTreeGrpCfg   OBJECT IDENTIFIER ::= { switch 19 }

agPortConfig      OBJECT IDENTIFIER ::= { agent 3 }

mirroring         OBJECT IDENTIFIER ::= { switch 18 }
mirrPortMirr      OBJECT IDENTIFIER ::= { mirroring 1 }
mirrVlanMirr      OBJECT IDENTIFIER ::= { mirroring 2 }

portCpuStats	  OBJECT IDENTIFIER ::= { stats  17 }
port-stats	  OBJECT IDENTIFIER ::= { stats  26 }

port-info	  OBJECT IDENTIFIER ::= { information 1 }

-- Agent Port Table

agPortTableMaxEnt OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of rows in the port configuration host table."
    ::= { agPortConfig 1 }

agPortCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgPortCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of port configuration in the current_configuration block."
    ::= { agPortConfig 2 }

agPortCurCfgTableEntry OBJECT-TYPE
    SYNTAX  AgPortCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the port table in the current_configuration block."
    INDEX   { agPortCurCfgIndx }
    ::= { agPortCurCfgTable 1 }

AgPortCurCfgTableEntry ::= SEQUENCE {
    agPortCurCfgIndx           INTEGER,
    agPortCurCfgPrefLink       INTEGER,
    agPortCurCfgBackLink       INTEGER,
    agPortCurCfgState          INTEGER,
    agPortCurCfgVlanTag        INTEGER,
    agPortCurCfgStp            INTEGER,
    agPortCurCfgRmon           INTEGER,
    agPortCurCfgPVID           INTEGER,
    agPortCurCfgFastEthAutoNeg INTEGER,
    agPortCurCfgFastEthSpeed   INTEGER,
    agPortCurCfgFastEthMode    INTEGER,
    agPortCurCfgFastEthFctl    INTEGER,
    agPortCurCfgGigEthAutoNeg  INTEGER,
    agPortCurCfgGigEthFctl     INTEGER,
    agPortCurCfgPortName       DisplayString,
    agPortCurCfgBwmContract    INTEGER,
    agPortCurCfgDiscardNonIPs  INTEGER,
    agPortCurCfgLinkTrap       INTEGER
    }

agPortCurCfgIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the row in port configurations table."
    ::= { agPortCurCfgTableEntry 1 }

agPortCurCfgPrefLink OBJECT-TYPE
    SYNTAX  INTEGER {
        fast-ethernet(2),
        gigabit-ethernet(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is the preferred link."
    ::= { agPortCurCfgTableEntry 2 }

agPortCurCfgBackLink OBJECT-TYPE
    SYNTAX  INTEGER {
        fast-ethernet(2),
        gigabit-ethernet(3),
        none(4)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is the backup link."
    ::= { agPortCurCfgTableEntry 3 }

agPortCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is the state of the port."
    ::= { agPortCurCfgTableEntry 4 }

agPortCurCfgVlanTag OBJECT-TYPE
    SYNTAX  INTEGER {
        tagged(2),
        untagged(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is VLAN tag state of the port"
    ::= { agPortCurCfgTableEntry 5 }

agPortCurCfgStp OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn Spanning Tree on or off for the port."
    ::= { agPortCurCfgTableEntry 6 }

agPortCurCfgRmon OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn RMON on or off on the port."
   ::= { agPortCurCfgTableEntry 7 }

agPortCurCfgPVID OBJECT-TYPE
    SYNTAX  INTEGER (1..4094)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The default VLAN ID for the port."
    ::= { agPortCurCfgTableEntry 8 }

agPortCurCfgFastEthAutoNeg OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn the autonegotiation on or off
         for fast Ethernet connection."
    ::= { agPortCurCfgTableEntry 9 }

agPortCurCfgFastEthSpeed OBJECT-TYPE
    SYNTAX  INTEGER {
        mbs10(2),
        mbs100(3),
        mbs10or100(4)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Selects the port speed for fast Ethernet connection."
    ::= { agPortCurCfgTableEntry 10 }

agPortCurCfgFastEthMode OBJECT-TYPE
    SYNTAX  INTEGER {
        full-duplex(2),
        half-duplex(3),
        full-or-half-duplex(4)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to select port mode for fast Ethernet connection."
    ::= { agPortCurCfgTableEntry 11 }

agPortCurCfgFastEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Selects the port flow control for fast Ethernet connection."
    ::= { agPortCurCfgTableEntry 12 }

agPortCurCfgGigEthAutoNeg OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn the autonegotiation on or off
         for gigabit Ethernet connection."
    ::= { agPortCurCfgTableEntry 13 }

agPortCurCfgGigEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This object is used to select port flow control for
         gigabit Ethernet connection."
    ::= { agPortCurCfgTableEntry 14 }

agPortCurCfgPortName	OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..63))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The switch port name."
    ::= { agPortCurCfgTableEntry 15 }

agPortCurCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The switch port Bandwidth Management contract number."
    ::= { agPortCurCfgTableEntry 16 }

agPortCurCfgDiscardNonIPs OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable to discard all non-IP traffic on the switch port."
    ::= { agPortCurCfgTableEntry 17 }

agPortCurCfgLinkTrap OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
    }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Indicates whether linkUp/linkDown traps should be
        generated for this interface.

        By default, this object should have the value
        enabled(1) for interfaces which do not operate on
        'top' of any other interface (as defined in the
        ifStackTable), and disabled(2) otherwise."
    ::= { agPortCurCfgTableEntry 18 }

agPortNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgPortNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of port configuration in the new_configuration block."
    ::= { agPortConfig 3 }

agPortNewCfgTableEntry OBJECT-TYPE
    SYNTAX  AgPortNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the port configuration table in the new_configuration block."
    INDEX   { agPortNewCfgIndx }
    ::= { agPortNewCfgTable 1 }

AgPortNewCfgTableEntry ::= SEQUENCE {
    agPortNewCfgIndx           INTEGER,
    agPortNewCfgPrefLink       INTEGER,
    agPortNewCfgBackLink       INTEGER,
    agPortNewCfgState          INTEGER,
    agPortNewCfgVlanTag        INTEGER,
    agPortNewCfgStp            INTEGER,
    agPortNewCfgRmon           INTEGER,
    agPortNewCfgPVID           INTEGER,
    agPortNewCfgFastEthAutoNeg INTEGER,
    agPortNewCfgFastEthSpeed   INTEGER,
    agPortNewCfgFastEthMode    INTEGER,
    agPortNewCfgFastEthFctl    INTEGER,
    agPortNewCfgGigEthAutoNeg  INTEGER,
    agPortNewCfgGigEthFctl     INTEGER,
    agPortNewCfgPortName       DisplayString,
    agPortNewCfgBwmContract    INTEGER,
    agPortNewCfgDiscardNonIPs  INTEGER,
    agPortNewCfgLinkTrap       INTEGER
    }

agPortNewCfgIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the row in port configurations table."
    ::= { agPortNewCfgTableEntry 1 }

agPortNewCfgPrefLink OBJECT-TYPE
    SYNTAX  INTEGER {
        fast-ethernet(2),
        gigabit-ethernet(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is the preferred link."
    ::= { agPortNewCfgTableEntry 2 }

agPortNewCfgBackLink OBJECT-TYPE
    SYNTAX  INTEGER {
        fast-ethernet(2),
        gigabit-ethernet(3),
        none(4)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is the backup link."
    ::= { agPortNewCfgTableEntry 3 }

agPortNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is the state of the port."
    ::= { agPortNewCfgTableEntry 4 }

agPortNewCfgVlanTag OBJECT-TYPE
    SYNTAX  INTEGER {
        tagged(2),
        untagged(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is VLAN tag state of the port"
    ::= { agPortNewCfgTableEntry 5 }

agPortNewCfgStp OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn Spanning Tree on or off for the port."
    ::= { agPortNewCfgTableEntry 6 }

agPortNewCfgRmon OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn RMON on or off on the port."
    ::= { agPortNewCfgTableEntry 7 }

agPortNewCfgPVID OBJECT-TYPE
    SYNTAX  INTEGER (1..4094)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The default VLAN ID for the port."
    ::= { agPortNewCfgTableEntry 8 }

agPortNewCfgFastEthAutoNeg OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn the autonegotiation on or off
         for fast Ethernet connection."
    ::= { agPortNewCfgTableEntry 9 }

agPortNewCfgFastEthSpeed OBJECT-TYPE
    SYNTAX  INTEGER {
        mbs10(2),
        mbs100(3),
        mbs10or100(4)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Selects the port speed for fast Ethernet connection."
    ::= { agPortNewCfgTableEntry 10 }
 
agPortNewCfgFastEthMode OBJECT-TYPE
    SYNTAX  INTEGER {
        full-duplex(2),
        half-duplex(3),
        full-or-half-duplex(4)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to select port mode for fast Ethernet connection."
    ::= { agPortNewCfgTableEntry 11 }

agPortNewCfgFastEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Selects the port flow control for fast Ethernet connection."
    ::= { agPortNewCfgTableEntry 12 }

agPortNewCfgGigEthAutoNeg OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to turn the autonegotiation on or off
         for gigabit Ethernet connection."
    ::= { agPortNewCfgTableEntry 13 }

agPortNewCfgGigEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        transmit(2),
        receive(3),
        both(4),
        none(5)
       }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This object is used to select port flow control for
         gigabit Ethernet connection."
    ::= { agPortNewCfgTableEntry 14 }

agPortNewCfgPortName	OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..63))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The switch port name."
    ::= { agPortNewCfgTableEntry 15 }

agPortNewCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The switch port Bandwidth Management contract number."
    ::= { agPortNewCfgTableEntry 16 }

agPortNewCfgDiscardNonIPs OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable to discard all non-IP traffic on the switch port."
    ::= { agPortNewCfgTableEntry 17 }

agPortNewCfgLinkTrap OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
    }
    ACCESS  read-write
    STATUS  mandatory 
    DESCRIPTION
        "Indicates whether linkUp/linkDown traps should be
        generated for this interface.

        By default, this object should have the value
        enabled(1) for interfaces which do not operate on
        'top' of any other interface (as defined in the
        ifStackTable), and disabled(2) otherwise."
    ::= { agPortNewCfgTableEntry 18 }

-- VLAN group

vlanMaxEnt OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of rows in the VLAN configuration table."
    ::= { vlans 1 }

vlanCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VlanCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VLAN configuration."
    ::= { vlans 2 }

vlanCurCfgTableEntry OBJECT-TYPE
    SYNTAX  VlanCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the VLAN configuration table."
    INDEX  { vlanCurCfgVlanId }
    ::= { vlanCurCfgTable 1 }

VlanCurCfgTableEntry ::= SEQUENCE {
    vlanCurCfgVlanId 		INTEGER,
    vlanCurCfgVlanName 		DisplayString,
    vlanCurCfgPorts 		OCTET STRING,
    vlanCurCfgState 		INTEGER,
    vlanCurCfgJumbo 		INTEGER,
    vlanCurCfgBwmContract	INTEGER,
    vlanCurCfgStg  	        INTEGER
    }

vlanCurCfgVlanId OBJECT-TYPE
    SYNTAX  INTEGER  (1..4094)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VLAN identifier."
    ::= { vlanCurCfgTableEntry 1 }

vlanCurCfgVlanName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VLAN name."
    ::= { vlanCurCfgTableEntry 2 }

vlanCurCfgPorts	OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port list in the VLAN. The ports are presented in bitmap format.
	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the VLAN
		   0 - The represented port does not belong to the VLAN"
    ::= { vlanCurCfgTableEntry 3 }

vlanCurCfgState	OBJECT-TYPE
    SYNTAX  INTEGER  {
	enabled(2),
	disabled(3)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable a VLAN"
    ::= { vlanCurCfgTableEntry 4 }

vlanCurCfgJumbo OBJECT-TYPE
    SYNTAX  INTEGER  {
	enabled(2),
	disabled(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or Disable the Jumbo frame support for the VLAN "
    ::= { vlanCurCfgTableEntry 5 }

vlanCurCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Default contract number the VLAN "
    ::= { vlanCurCfgTableEntry 6 }

vlanCurCfgStg OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The Spanning Tree Group for the VLAN."
    ::= { vlanCurCfgTableEntry 7 }

vlanNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VlanNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VLAN configuration."
    ::= { vlans 3 }

vlanNewCfgTableEntry OBJECT-TYPE
    SYNTAX  VlanNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the VLAN configuration table."
    INDEX  { vlanNewCfgVlanId }
    ::= { vlanNewCfgTable 1 }

VlanNewCfgTableEntry ::= SEQUENCE {
    vlanNewCfgVlanId 		INTEGER,
    vlanNewCfgVlanName 		DisplayString,
    vlanNewCfgPorts 		OCTET STRING,
    vlanNewCfgState 		INTEGER,
    vlanNewCfgJumbo 		INTEGER,
    vlanNewCfgAddPort 		INTEGER,
    vlanNewCfgRemovePort	INTEGER,
    vlanNewCfgDelete 		INTEGER,
    vlanNewCfgBwmContract	INTEGER,
    vlanNewCfgStg  	        INTEGER
    }

vlanNewCfgVlanId OBJECT-TYPE
    SYNTAX  INTEGER  (1..4094)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VLAN identifier."
    ::= { vlanNewCfgTableEntry 1 }

vlanNewCfgVlanName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The VLAN name."
    ::= { vlanNewCfgTableEntry 2 }

vlanNewCfgPorts	OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port list in the VLAN.  The ports are presented in bitmap format.
         in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the VLAN
	           0 - The represented port does not belong to the VLAN"
    ::= { vlanNewCfgTableEntry 3 }

vlanNewCfgState	OBJECT-TYPE
    SYNTAX  INTEGER  {
	enabled(2),
	disabled(3)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable a VLAN"
    ::= { vlanNewCfgTableEntry 4 }

vlanNewCfgJumbo OBJECT-TYPE
    SYNTAX  INTEGER  {
	enabled(2),
	disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or Disable the Jumbo frame support for the VLAN "
    ::= { vlanNewCfgTableEntry 5 }

vlanNewCfgAddPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port to be added to the specified VLAN.  A '0' value is 
         returned when read."
    ::= { vlanNewCfgTableEntry 6 }

vlanNewCfgRemovePort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port to be removed from the specified VLAN.  A '0'
         value is returned when read."
    ::= { vlanNewCfgTableEntry 7 }

vlanNewCfgDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is an action object to create or delete a VLAN.
         other(1) is returned always when read.
         The following values are writable: delete(2)...to delete a VLAN"
    ::= { vlanNewCfgTableEntry 8 }

vlanNewCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Default contract number for the VLAN."
    ::= { vlanNewCfgTableEntry 9 }

vlanNewCfgStg OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The Spanning Tree Group for the VLAN."
    ::= { vlanNewCfgTableEntry 10 }

-- Port Mirroring Group

pmCurCfgMonitoringPort OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  obsolete
    DESCRIPTION
        "The port number of the monitoring port."
    ::= { portmirroring 1 }

pmNewCfgMonitoringPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  obsolete
    DESCRIPTION
        "The port number of the monitoring port."
    ::= { portmirroring 2 }

pmCurCfgMirroredPort OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  obsolete
    DESCRIPTION
	"The port number of the mirrored port."
    ::= { portmirroring 3 }

pmNewCfgMirroredPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  obsolete
    DESCRIPTION
        "The port number of the mirrored port."
    ::= { portmirroring 4 }

pmCurCfgMonitoredTraffic OBJECT-TYPE
    SYNTAX  INTEGER {
	none(2),
	received(3),
	transmitted(4),
	both(5)
	}
    ACCESS  read-only
    STATUS  obsolete
    DESCRIPTION
	"The type of traffic to be monitored with respect to the mirrored 
         port."
    ::= { portmirroring 5 }

pmNewCfgMonitoredTraffic OBJECT-TYPE
    SYNTAX  INTEGER {
	none(2),
	received(3),
	transmitted(4),
	both(5)
        }
    ACCESS  read-write
    STATUS  obsolete
    DESCRIPTION
        "The type of traffic to be monitored with respect to the
         mirrored port."
    ::= { portmirroring 6 }

pmCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(2),
	disabled(3)
	}
    ACCESS  read-only
    STATUS  obsolete
    DESCRIPTION
        "The state of Port mirroring."
    ::= { portmirroring 7 }
 
pmNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(2),
	disabled(3)
        }
    ACCESS  read-write
    STATUS  obsolete
    DESCRIPTION
        "The state of Port mirroring."
    ::= { portmirroring 8 }

pmCurCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER (0..86400)
    ACCESS  read-only
    STATUS  obsolete
    DESCRIPTION
	"The mirroring timeout value in seconds."
    ::= { portmirroring 9 }

pmNewCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER (0..86400)
    ACCESS  read-write
    STATUS  obsolete
    DESCRIPTION
	"The mirroring timeout value in seconds."
    ::= { portmirroring 10 }

-- Trunk Group Group

trunkGroupTableMaxSize OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of entries in trunk group table."
    ::= { trunkgroup 1 }

trunkGroupCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TrunkGroupCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of trunk group configuration."
    ::= { trunkgroup 2 }

trunkGroupCurCfgTableEntry OBJECT-TYPE
    SYNTAX  TrunkGroupCurCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the trunk group configuration table."
    INDEX   { trunkGroupCurCfgIndex }
    ::= { trunkGroupCurCfgTable 1 }

TrunkGroupCurCfgTableEntry ::= SEQUENCE {
    trunkGroupCurCfgIndex         INTEGER,
    trunkGroupCurCfgPorts         OCTET STRING,
    trunkGroupCurCfgState         INTEGER,
    trunkGroupCurCfgBwmContract   INTEGER
    }
 
trunkGroupCurCfgIndex OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The identifier of the trunk group."
    ::= { trunkGroupCurCfgTableEntry 1 }
 
trunkGroupCurCfgPorts OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port list in the trunk group. The ports are presented in 
         bitmap format.
 
         in receiving order:
 
             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the trunk group
                   0 - The represented port does not belong to the trunk group"
    ::= { trunkGroupCurCfgTableEntry 2 }
 
trunkGroupCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable a trunk group."
    ::= { trunkGroupCurCfgTableEntry 3 }
 
trunkGroupCurCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Default BW contract of a trunk group."
    ::= { trunkGroupCurCfgTableEntry 4 }
 
-- Trunk-Group  New configuration

trunkGroupNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TrunkGroupNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of trunk group configuration."
    ::= { trunkgroup 3 }

trunkGroupNewCfgTableEntry OBJECT-TYPE
    SYNTAX  TrunkGroupNewCfgTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the trunk group configuration table."
    INDEX   { trunkGroupNewCfgIndex }
    ::= { trunkGroupNewCfgTable 1 }

TrunkGroupNewCfgTableEntry ::= SEQUENCE {
    trunkGroupNewCfgIndex          INTEGER,
    trunkGroupNewCfgPorts          OCTET STRING,
    trunkGroupNewCfgAddPort        INTEGER,
    trunkGroupNewCfgRemovePort     INTEGER,
    trunkGroupNewCfgState          INTEGER,
    trunkGroupNewCfgDelete         INTEGER,
    trunkGroupNewCfgBwmContract    INTEGER
    }
 
trunkGroupNewCfgIndex OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The identifier of the trunk group."
    ::= { trunkGroupNewCfgTableEntry 1 }
 
trunkGroupNewCfgPorts OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..16))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port list in the trunk group.  The ports are presented
         in bitmap format.

         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved
 
         where x : 1 - The represented port belongs to the trunk group
                   0 - The represented port does not belong to the trunk group"
    ::= { trunkGroupNewCfgTableEntry 2 }
 
trunkGroupNewCfgAddPort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port to be added in the trunk group. When read, 0 is returned."
    ::= { trunkGroupNewCfgTableEntry 3 }

trunkGroupNewCfgRemovePort OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The port to be deleted from the trunk group. when read, 0
	 is returned."
    ::= { trunkGroupNewCfgTableEntry 4 }

trunkGroupNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable a trunk group."
    ::= { trunkGroupNewCfgTableEntry 5 }
 
trunkGroupNewCfgDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Setting the value to delete(2) will delete the entire
         row. When read, other(1) is returned."
    ::= { trunkGroupNewCfgTableEntry 6 }

trunkGroupNewCfgBwmContract OBJECT-TYPE
    SYNTAX  INTEGER  
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Default BW contract of a trunk group."
    ::= { trunkGroupNewCfgTableEntry 7 }

--
-- Spanning Tree Group Configuration
--
-- This group specifies the additional configurations that are not
-- covered by the Bridge MIB (RFC 1493).
-- The relative Spanning Tree information can be retrieved or configured
-- using Bridge MIB with an unique community string for each group specified
-- in entLogicalTable of Entity MIB (RFC 2037).
--
stgCurCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StgCurCfgTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of Spanning Tree Groups configuration in the current_config."
    ::= { spannTreeGrpCfg 1 }

stgCurCfgTableEntry OBJECT-TYPE
    SYNTAX StgCurCfgTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Information about a particular Spanning Tree Group configuration."
    INDEX { stgCurCfgIndex }
    ::= { stgCurCfgTable 1 }

StgCurCfgTableEntry ::= SEQUENCE {
    stgCurCfgIndex      INTEGER,
    stgCurCfgState      INTEGER,
    stgCurCfgVlanBmap1	OCTET STRING,	
    stgCurCfgVlanBmap2	OCTET STRING	
    }

stgCurCfgIndex OBJECT-TYPE
    SYNTAX INTEGER (1..8)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group.  This is also
         index to the entLogicalTable of Entity MIB."
    ::= { stgCurCfgTableEntry 1 }

stgCurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Turn on of off Spanning Tree operation of a particular Spanning
         Tree Group."
    ::= { stgCurCfgTableEntry 2 }

stgCurCfgVlanBmap1 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..256)) 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	"The vlans applied to the spanning tree group.  The vlans are 
         presented in bitmap format. This string displays vlan number
	 from 1 to 2048.

	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ vlan 9
             ||    ||  
             ||    ||___ vlan 8
             ||    |____ vlan 7
             ||      .    .   .
             ||_________ vlan 2
             |__________ vlan 1 (as index to stgCurCfgTable)

         where x : 1 - The represented vlan applied to the spanning tree. 
		   0 - The represented vlan not applied to the spanning tree"
    ::= { stgCurCfgTableEntry 3 }

stgCurCfgVlanBmap2 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..256)) 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	"The vlans applied to the spanning tree group.  The vlans are 
         presented in bitmap format. This string displays vlan number
	 from 2049 to 4096.

	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ vlan 2057 
             ||    ||  
             ||    ||___ vlan 2056 
             ||    |____ vlan 2055 
             ||      .    .   .
             ||_________ vlan 2050 
             |__________ vlan 2049 (as index to stgCurCfgTable)

         where x : 1 - The represented vlan applied to the spanning tree. 
		   0 - The represented vlan not applied to the spanning tree"
    ::= { stgCurCfgTableEntry 4 }


stgNewCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StgNewCfgTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of Spanning Tree Groups configuration in the new_config."
    ::= { spannTreeGrpCfg 2 }

stgNewCfgTableEntry OBJECT-TYPE
    SYNTAX StgNewCfgTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Information about a particular Spanning Tree Group configuration."
    INDEX { stgNewCfgIndex }
    ::= { stgNewCfgTable 1 }

StgNewCfgTableEntry ::= SEQUENCE {
    stgNewCfgIndex      INTEGER,
    stgNewCfgState      INTEGER,
    stgNewCfgDefaultCfg INTEGER,
    stgNewCfgAddVlan    INTEGER,
    stgNewCfgRemoveVlan INTEGER,
    stgNewCfgVlanBmap1	OCTET STRING,
    stgNewCfgVlanBmap2	OCTET STRING
    }

stgNewCfgIndex  OBJECT-TYPE
    SYNTAX INTEGER (1..8)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group.  This is also
         index to the entLogicalTable of Entity MIB."
    ::= { stgNewCfgTableEntry 1 }

stgNewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Turn on of off Spanning Tree operation of a particular Spanning
         Tree Group."
    ::= { stgNewCfgTableEntry 2 }

stgNewCfgDefaultCfg OBJECT-TYPE
    SYNTAX INTEGER {
        default-config(1)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Setting the value to default-config(1) will set the default
         configuration as recommended by IEEE 802.1D for a particular
         Spanning Tree Group.  default-config (1) is always returned 
	 When read, but it does not mean anything."
    ::= { stgNewCfgTableEntry 3 }

stgNewCfgAddVlan OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The vlan to be added to the specified Spanning Tree Group.  A 
         '0' value is returned when read." 
    ::= {stgNewCfgTableEntry 4 }

stgNewCfgRemoveVlan OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The vlan to be removed from the specified Spanning Tree Group.
         A '0' value is returned when read."
    ::= { stgNewCfgTableEntry 5 }

stgNewCfgVlanBmap1 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..256)) 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	"The vlans applied to the spanning tree group.  The vlans are 
         presented in bitmap format. This string displays vlan number
	 from 1 to 2048.

	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ vlan 9
             ||    ||  
             ||    ||___ vlan 8
             ||    |____ vlan 7
             ||      .    .   .
             ||_________ vlan 2
             |__________ vlan 1 (as index to stgCurCfgTable)

         where x : 1 - The represented vlan applied to the spanning tree. 
		   0 - The represented vlan not applied to the spanning tree"
    ::= { stgNewCfgTableEntry 6 }

stgNewCfgVlanBmap2 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..256)) 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	"The vlans applied to the spanning tree group.  The vlans are 
         presented in bitmap format. This string displays vlan number
	 from 2049 to 4096.

	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ vlan 2057 
             ||    ||  
             ||    ||___ vlan 2056 
             ||    |____ vlan 2055 
             ||      .    .   .
             ||_________ vlan 2050 
             |__________ vlan 2049 (as index to stgCurCfgTable)

         where x : 1 - The represented vlan applied to the spanning tree. 
		   0 - The represented vlan not applied to the spanning tree"
    ::= { stgNewCfgTableEntry 7 }

stgCurCfgPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StgCurCfgPortTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of Spanning Tree Group port configuration in the
         current_config."
    ::= { spannTreeGrpCfg 3 }

stgCurCfgPortTableEntry OBJECT-TYPE
    SYNTAX StgCurCfgPortTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Information about port configuration of a particular Spanning Tree
         Group."
    INDEX { stgCurCfgStgIndex, stgCurCfgPortIndex }
    ::= { stgCurCfgPortTable 1 }

StgCurCfgPortTableEntry ::= SEQUENCE {
    stgCurCfgStgIndex      INTEGER,
    stgCurCfgPortIndex     INTEGER,
    stgCurCfgPortState     INTEGER
    }

stgCurCfgStgIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group.  This is also
         index to the entLogicalTable of Entity MIB."
    ::= { stgCurCfgPortTableEntry 1 }

stgCurCfgPortIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The port identifier of a particular Spanning Tree Group."
    ::= { stgCurCfgPortTableEntry 2 }

stgCurCfgPortState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Turn on of off Spanning Tree operation of a particular port of a
         Spanning Tree Group."
    ::= { stgCurCfgPortTableEntry 3 }


stgNewCfgPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StgNewCfgPortTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table of Spanning Tree Group port configuration in the
         new_config."
    ::= { spannTreeGrpCfg 4 }

stgNewCfgPortTableEntry OBJECT-TYPE
    SYNTAX StgNewCfgPortTableEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Information about port configuration of a particular Spanning Tree
         Group."
    INDEX { stgNewCfgStgIndex, stgNewCfgPortIndex }
    ::= { stgNewCfgPortTable 1 }

StgNewCfgPortTableEntry ::= SEQUENCE {
    stgNewCfgStgIndex      INTEGER,
    stgNewCfgPortIndex     INTEGER,
    stgNewCfgPortState     INTEGER
    }

stgNewCfgStgIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group.  This is also
         index to the entLogicalTable of Entity MIB."
    ::= { stgNewCfgPortTableEntry 1 }

stgNewCfgPortIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The port identifier of a particular Spanning Tree Group."
    ::= { stgNewCfgPortTableEntry 2 }

stgNewCfgPortState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Turn on of off Spanning Tree operation of a particular port of a
         Spanning Tree Group."
    ::= { stgNewCfgPortTableEntry 3 }

-- Complete Port Mirroring 

-- Port-based port mirroring

pmCurCfgPortMirrState OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The state of port-based port mirroring."
    ::= { mirrPortMirr 1 }
 
pmNewCfgPortMirrState OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The state of port-based port mirroring."
    ::= { mirrPortMirr 2 }

pmCurCfgPortMonitorTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PmCurCfgPortMonitorEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of monitoring ports."
    ::= { mirrPortMirr 3 }

pmCurCfgPortMonitorEntry OBJECT-TYPE
    SYNTAX  PmCurCfgPortMonitorEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the monitoring port table."
    INDEX   { pmCurCfgPmirrMoniPortIndex, pmCurCfgPmirrMirrPortIndex }
    ::= { pmCurCfgPortMonitorTable 1 }

PmCurCfgPortMonitorEntry ::= SEQUENCE {
    pmCurCfgPmirrMoniPortIndex       INTEGER,
    pmCurCfgPmirrMirrPortIndex       INTEGER,
    pmCurCfgPmirrDirection           INTEGER
    }

pmCurCfgPmirrMoniPortIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The monitoring port number." 
    ::= { pmCurCfgPortMonitorEntry 1 }

pmCurCfgPmirrMirrPortIndex OBJECT-TYPE 
    SYNTAX  INTEGER 
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The mirrored port number" 
    ::= { pmCurCfgPortMonitorEntry 2 }

pmCurCfgPmirrDirection OBJECT-TYPE
    SYNTAX  INTEGER {
	in(1),
	out(2),
	both(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The type of traffic to be monitored with respect to the
         mirrored port."
    ::= { pmCurCfgPortMonitorEntry 3 }

pmNewCfgPortMonitorTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PmNewCfgPortMonitorEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of monitoring ports."
    ::= { mirrPortMirr 4 }

pmNewCfgPortMonitorEntry OBJECT-TYPE
    SYNTAX  PmNewCfgPortMonitorEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the monitoring port table."
    INDEX   { pmNewCfgPmirrMoniPortIndex, pmNewCfgPmirrMirrPortIndex }
    ::= { pmNewCfgPortMonitorTable 1 }

PmNewCfgPortMonitorEntry ::= SEQUENCE {
    pmNewCfgPmirrMoniPortIndex          INTEGER,
    pmNewCfgPmirrMirrPortIndex          INTEGER,
    pmNewCfgPmirrDirection              INTEGER,
    pmNewCfgPmirrDelete                 INTEGER
    }

pmNewCfgPmirrMoniPortIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The monitoring port number." 
    ::= { pmNewCfgPortMonitorEntry 1 }

pmNewCfgPmirrMirrPortIndex OBJECT-TYPE 
    SYNTAX  INTEGER 
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The mirrored port number" 
    ::= { pmNewCfgPortMonitorEntry 2 }

pmNewCfgPmirrDirection OBJECT-TYPE
    SYNTAX  INTEGER {
	in(1),
	out(2),
	both(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The type of traffic to be monitored with respect to the
         mirrored port."
    ::= { pmNewCfgPortMonitorEntry 3 }

pmNewCfgPmirrDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Setting the value to delete(2) will delete the entire
         row. When read, other(1) is returned."
    ::= { pmNewCfgPortMonitorEntry 4 }

-- Vlan-based port mirroring

pmCurCfgVlanMirrState OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The state of vlan-based port mirroring."
    ::= { mirrVlanMirr 1 }
 
pmNewCfgVlanMirrState OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The state of vlan-based port mirroring."
    ::= { mirrVlanMirr 2 }

pmCurCfgVlanMonitorTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PmCurCfgVlanMonitorEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of vlan based port mirroring."
    ::= { mirrVlanMirr 3 }

pmCurCfgVlanMonitorEntry OBJECT-TYPE
    SYNTAX  PmCurCfgVlanMonitorEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the monitoring vlan table."
    INDEX   { pmCurCfgVmirrMoniPortIndex, pmCurCfgVmirrMirrVlanIndex }
    ::= { pmCurCfgVlanMonitorTable 1 }

PmCurCfgVlanMonitorEntry ::= SEQUENCE {
    pmCurCfgVmirrMoniPortIndex       INTEGER,
    pmCurCfgVmirrMirrVlanIndex       INTEGER,
    pmCurCfgVmirrDirection           INTEGER
    }

pmCurCfgVmirrMoniPortIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The monitoring port number." 
    ::= { pmCurCfgVlanMonitorEntry 1 }

pmCurCfgVmirrMirrVlanIndex OBJECT-TYPE 
    SYNTAX  INTEGER 
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The mirrored vlan number" 
    ::= { pmCurCfgVlanMonitorEntry 2 }

pmCurCfgVmirrDirection OBJECT-TYPE
    SYNTAX  INTEGER {
	in(1),
	out(2),
	both(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The type of traffic to be monitored with respect to the
         mirrored vlan."
    ::= { pmCurCfgVlanMonitorEntry 3 }

pmNewCfgVlanMonitorTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PmNewCfgVlanMonitorEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of vlan-based port mirroring."
    ::= { mirrVlanMirr 4 }

pmNewCfgVlanMonitorEntry OBJECT-TYPE
    SYNTAX  PmNewCfgVlanMonitorEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the monitoring vlan table."
    INDEX   { pmNewCfgVmirrMoniPortIndex, pmNewCfgVmirrMirrVlanIndex }
    ::= { pmNewCfgVlanMonitorTable 1 }

PmNewCfgVlanMonitorEntry ::= SEQUENCE {
    pmNewCfgVmirrMoniPortIndex          INTEGER,
    pmNewCfgVmirrMirrVlanIndex          INTEGER,
    pmNewCfgVmirrDirection              INTEGER,
    pmNewCfgVmirrDelete                 INTEGER
    }

pmNewCfgVmirrMoniPortIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The monitoring port number." 
    ::= { pmNewCfgVlanMonitorEntry 1 }

pmNewCfgVmirrMirrVlanIndex OBJECT-TYPE 
    SYNTAX  INTEGER 
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The mirrored vlan number" 
    ::= { pmNewCfgVlanMonitorEntry 2 }

pmNewCfgVmirrDirection OBJECT-TYPE
    SYNTAX  INTEGER {
	in(1),
	out(2),
	both(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The type of traffic to be monitored with respect to the
         mirrored vlan."
    ::= { pmNewCfgVlanMonitorEntry 3 }

pmNewCfgVmirrDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Setting the value to delete(2) will delete the entire
         row. When read, other(1) is returned."
    ::= { pmNewCfgVlanMonitorEntry 4 }

-- Port CPU utilization table

portCpuStatsUtilTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PortCpuStatsUtilTableEntry 
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of port CPU utilization."
    ::= { portCpuStats 1 }

portCpuStatsUtilTableEntry OBJECT-TYPE
    SYNTAX  PortCpuStatsUtilTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the port CPU utilization table."
    INDEX   { portCpuStatsUtilIndx }
    ::= { portCpuStatsUtilTable 1 }

PortCpuStatsUtilTableEntry ::= SEQUENCE {
    portCpuStatsUtilIndx 	    INTEGER,
    portCpuAStatsUtil1Second	    INTEGER,
    portCpuBStatsUtil1Second	    INTEGER,
    portCpuAStatsUtil4Seconds	    INTEGER,
    portCpuBStatsUtil4Seconds       INTEGER,
    portCpuAStatsUtil64Seconds      INTEGER,
    portCpuBStatsUtil64Seconds      INTEGER
    }

portCpuStatsUtilIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port index."
    ::= { portCpuStatsUtilTableEntry 1 }

portCpuAStatsUtil1Second OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU A over 1 second. It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 2}
 
portCpuBStatsUtil1Second OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU B over 1 second. It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 3}

portCpuAStatsUtil4Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU A over 4 seconds.
         It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 4}
 
portCpuBStatsUtil4Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU B over 4 seconds.
         It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 5}

portCpuAStatsUtil64Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU A over 64 seconds.
	 It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 6}
 
portCpuBStatsUtil64Seconds OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The utilization of port CPU B over 64 seconds.
	 It shows the percentage."
    ::= { portCpuStatsUtilTableEntry 7}


-- Information Group

-- This group represents run-time status of the system

-- Port information table

portInfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PortInfoTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of port information."
    ::= { port-info 1 }

portInfoTableEntry OBJECT-TYPE
    SYNTAX  PortInfoTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the port information table."
    INDEX   { portInfoIndx }
    ::= { portInfoTable 1 }

PortInfoTableEntry ::= SEQUENCE {
    portInfoIndx        	INTEGER,
    portInfoSpeed       	INTEGER,
    portInfoMode        	INTEGER,
    portInfoFlowCtrl    	INTEGER,
    portInfoLink        	INTEGER,
    portInfoPhyIfDescr  	DisplayString,
    portInfoPhyIfType   	INTEGER,
    portInfoPhyIfMtu    	INTEGER,
    portInfoPhyIfPhysAddress  	PhysAddress,
    portInfoPhyIfOperStatus	INTEGER, 
    portInfoPhyIfLastChange	TimeTicks	
    }

portInfoIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port index."
    ::= { portInfoTableEntry 1 }

portInfoSpeed OBJECT-TYPE
    SYNTAX  INTEGER {
        mbs10(2),
        mbs100(3),
        mbs1000(4),
        any(5)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current operational speed of the port."
    ::= { portInfoTableEntry 2 }

portInfoMode OBJECT-TYPE
    SYNTAX  INTEGER {
        full-duplex(2),
        half-duplex(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current operational mode of the port."
    ::= { portInfoTableEntry 3 }

portInfoFlowCtrl OBJECT-TYPE
    SYNTAX  INTEGER {
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current operational flow control of the port."
    ::= { portInfoTableEntry 4 }

portInfoLink OBJECT-TYPE
    SYNTAX  INTEGER {
        up(1),
        down(2),
        disabled(3),
        inoperative(4) -- unrecognized PCI device
        }
     ACCESS  read-only
     STATUS  mandatory
     DESCRIPTION
         "The current operational link status of the port."
     ::= { portInfoTableEntry 5 }

portInfoPhyIfDescr OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "A textual string containing information about the
	    interface.  This string should include the name of
	    the manufacturer, the product name and the version
	    of the hardware interface."
    ::= { portInfoTableEntry 6 }

portInfoPhyIfType OBJECT-TYPE
    SYNTAX  INTEGER {
		other(1),          -- none of the following
		regular1822(2),
		hdh1822(3),
		ddn-x25(4),
		rfc877-x25(5),
		ethernet-csmacd(6),
		iso88023-csmacd(7),
		iso88024-tokenBus(8),
		iso88025-tokenRing(9),
		iso88026-man(10),
		starLan(11),
		proteon-10Mbit(12),
		proteon-80Mbit(13),
		hyperchannel(14),
		fddi(15),
		lapb(16),
		sdlc(17),
		ds1(18),           -- T-1
		e1(19),            -- european equiv. of T-1
		basicISDN(20),
		primaryISDN(21),   -- proprietary serial
		propPointToPointSerial(22),
		ppp(23),
		softwareLoopback(24),
		eon(25),            -- CLNP over IP [11]
		ethernet-3Mbit(26),
		nsip(27),           -- XNS over IP
		slip(28),           -- generic SLIP
		ultra(29),          -- ULTRA technologies
		ds3(30),            -- T-3
		sip(31),            -- SMDS
		frame-relay(32)
	    }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The type of interface, distinguished according to
	    the physical/link protocol(s) immediately `below'
	    the network layer in the protocol stack."
    ::= { portInfoTableEntry 7 }

portInfoPhyIfMtu OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The size of the largest datagram which can be
	    sent/received on the interface, specified in
	    octets.  For interfaces that are used for
	    transmitting network datagrams, this is the size
	    of the largest network datagram that can be sent
	    on the interface."
    ::= { portInfoTableEntry 8 }

portInfoPhyIfPhysAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The interface's address at the protocol layer
	    immediately `below' the network layer in the
	    protocol stack.  For interfaces which do not have
	    such an address (e.g., a serial line), this object
	    should contain an octet string of zero length."
    ::= { portInfoTableEntry 9 }

portInfoPhyIfOperStatus OBJECT-TYPE
    SYNTAX  INTEGER {
		up(1),       -- ready to pass packets
		down(2),
		testing(3)   -- in some test mode
	    }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The current operational state of the interface.
	    The testing(3) state indicates that no operational
	    packets can be passed."
    ::= { portInfoTableEntry 10 }

portInfoPhyIfLastChange OBJECT-TYPE
    SYNTAX  TimeTicks
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The value of sysUpTime at the time the interface
	    entered its current operational state.  If the
	    current state was entered prior to the last re-
	    initialization of the local network management
	    subsystem, then this object contains a zero
	    value."
    ::= { portInfoTableEntry 11 }

portStatsTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PortStatsTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of port statistics."
    ::= { port-stats 1 }

portStatsTableEntry OBJECT-TYPE
    SYNTAX  PortStatsTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the port stats table."
    INDEX   { portStatsIndx }
    ::= { portStatsTable 1 }

PortStatsTableEntry ::=
    SEQUENCE {
	portStatsIndx
	    INTEGER,
	portStatsPhyIfInOctets
	    Counter,
	portStatsPhyIfInUcastPkts
	    Counter,
	portStatsPhyIfInNUcastPkts
	    Counter,
	portStatsPhyIfInDiscards
	    Counter,
	portStatsPhyIfInErrors
	    Counter,
	portStatsPhyIfInUnknownProtos
	    Counter,
	portStatsPhyIfOutOctets
	    Counter,
	portStatsPhyIfOutUcastPkts
	    Counter,
	portStatsPhyIfOutNUcastPkts
	    Counter,
	portStatsPhyIfOutDiscards
	    Counter,
	portStatsPhyIfOutErrors
	    Counter,
	portStatsPhyIfOutQLen
	    Gauge,
        portStatsPhyIfInBroadcastPkts
            Counter,
        portStatsPhyIfOutBroadcastPkts
            Counter
    }

portStatsIndx OBJECT-TYPE
    SYNTAX  INTEGER  (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port index."
    ::= { portStatsTableEntry 1 }

portStatsPhyIfInOctets OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The total number of octets received on the
	    interface, including framing characters."
    ::= { portStatsTableEntry 2 }

portStatsPhyIfInUcastPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The number of subnetwork-unicast packets
	    delivered to a higher-layer protocol."
    ::= { portStatsTableEntry 3 }

portStatsPhyIfInNUcastPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The number of non-unicast (i.e., subnetwork-
	    broadcast or subnetwork-multicast) packets
	    delivered to a higher-layer protocol."
    ::= { portStatsTableEntry 4 }

portStatsPhyIfInDiscards OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The number of inbound packets which were chosen
	    to be discarded even though no errors had been
	    detected to prevent their being deliverable to a
	    higher-layer protocol.  One possible reason for
	    discarding such a packet could be to free up
	    buffer space."
    ::= { portStatsTableEntry 5 }

portStatsPhyIfInErrors OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The number of inbound packets that contained
	    errors preventing them from being deliverable to a
	    higher-layer protocol."
    ::= { portStatsTableEntry 6 }

portStatsPhyIfInUnknownProtos OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The number of packets received via the interface
	    which were discarded because of an unknown or
	    unsupported protocol."
    ::= { portStatsTableEntry 7 }

portStatsPhyIfOutOctets OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The total number of octets transmitted out of the
	    interface, including framing characters."
    ::= { portStatsTableEntry 8 }

portStatsPhyIfOutUcastPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The total number of packets that higher-level
	    protocols requested be transmitted to a
	    subnetwork-unicast address, including those that
	    were discarded or not sent."
    ::= { portStatsTableEntry 9 }

portStatsPhyIfOutNUcastPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The total number of packets that higher-level
	    protocols requested be transmitted to a non-
	    unicast (i.e., a subnetwork-broadcast or
	    subnetwork-multicast) address, including those
	    that were discarded or not sent."
    ::= { portStatsTableEntry 10 }

portStatsPhyIfOutDiscards OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The number of outbound packets which were chosen
	    to be discarded even though no errors had been
	    detected to prevent their being transmitted.  One
	    possible reason for discarding such a packet could
	    be to free up buffer space."
    ::= { portStatsTableEntry 11 }

portStatsPhyIfOutErrors OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The number of outbound packets that could not be
	    transmitted because of errors."
    ::= { portStatsTableEntry 12 }

portStatsPhyIfOutQLen OBJECT-TYPE
    SYNTAX  Gauge
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	    "The length of the output packet queue (in
	    packets)."
    ::= { portStatsTableEntry 13 }

portStatsPhyIfInBroadcastPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory 
    DESCRIPTION
            "The number of packets, delivered by this sub-layer to
            a higher (sub-)layer, which were addressed to a
            broadcast address at this sub-layer."
    ::= { portStatsTableEntry 14 }

portStatsPhyIfOutBroadcastPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory 
    DESCRIPTION
	    "The total number of packets that higher-level
            protocols requested be transmitted, and which were
            addressed to a broadcast address at this sub-layer,
            including those that were discarded or not sent."
    ::= { portStatsTableEntry 15 }

mirrOper        OBJECT IDENTIFIER ::= { operCmds 3 }

mirrOperMonitoringPort OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The switch port where the mirrored traffic are sent to.  A zero
         value indicates this field has not been configured."
    ::= { mirrOper 1 }

mirrOperMirroredPort OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The switch port where the egress traffic to be mirrored.  A zero
         value indicates this field has not been configured."
    ::= { mirrOper 2 }

mirrOperType OBJECT-TYPE
    SYNTAX INTEGER {
	none(1),
        in(2),
        out(3),
        both(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Type of packets to be sent to the monitor port.
         in = packets received at the mirrored port
         out = packets sent from the mirrored port
         both = packets sent and received by the mirrored port
        "
    ::= { mirrOper 3 }

mirrOperTimeout OBJECT-TYPE
    SYNTAX INTEGER (0..86400)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The duration in seconds for activating the mirroring rule.  Zero
         means forever."
    ::= { mirrOper 4 }

mirrOperState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable or disable port mirroring."
    ::= { mirrOper 5 }

END