path: root/MIBS/allied/AtiSwitch-MIB

-- Copyright 2001-2002 by Allied Telesyn International, Inc.
--
-- Name: AtiSwitch-MIB
--
-- Version: 2.1
--
-- Products using this MIB:
--      at8024
--      at8024GB
--      at8024M
--      at8016F
--      at8026FC
-- 
-- History:
-- Fawzi Aljumaan (ATI)       10/15/01        Created the MIB
-- Praveen Donthi (ATI)       12/21/01        Updated MIB for S39 1.1
-- Praveen Donthi (ATI)       03/20/02        Updated MIB for S39 1.4
-- Praveen Donthi (ATI)       06/07/02        Changed the datatype of 'Timeout' from INTEGER to Integer32.
--                                            Removed atiswitchBeVlanSendToCPU as it is no longer used.
--                                            Changed value range for atiswitchBeVlanMirrorPort from 1..26 
--                                            to 0..65535


AtiSwitch-MIB DEFINITIONS ::= BEGIN
        
        IMPORTS 
                OBJECT-TYPE, Integer32, Counter32, IpAddress, TimeTicks
                        FROM SNMPv2-SMI
                DisplayString, RowStatus, TruthValue
                        FROM SNMPv2-TC
                enterprises
                        FROM RFC1155-SMI;


-- OID tree for Allied Telesyn MIBs
        
        alliedTelesyn   OBJECT IDENTIFIER ::= { enterprises 207 }        
        mibObject       OBJECT IDENTIFIER ::= { alliedTelesyn 8 }


-- MODULE IDENTITY for the private mib
                        
        atiSwitchMib MODULE-IDENTITY
                LAST-UPDATED "0205010000Z"                                            
                ORGANIZATION "Allied Telesyn International"
                CONTACT-INFO "Allied Telesyn International"
                DESCRIPTION
                    "Private MIB for ATI next generation layer 2 
                    switches. This MIB can be used in Windows and 
                    UNIX environment"
            ::= { mibObject 15 }
                

-- General Definitions

        MACAddress      ::= OCTET STRING (SIZE (6))  -- a 6 octet
        BridgeId        ::= OCTET STRING (SIZE (8))  -- the Bridge Id as used in the STP
        Timeout         ::= Integer32  -- a STP timer in units of 1 / 100 seconds


-- OID tree for Allied Telesyn layer 2 switches

        atiProduct      OBJECT IDENTIFIER ::= { alliedTelesyn 1 }
        
        swhub           OBJECT IDENTIFIER ::= { atiProduct 4 }
        
        at-8024         OBJECT IDENTIFIER ::= { swhub 66 }
        at-8024GB       OBJECT IDENTIFIER ::= { swhub 67 }
        at-8024M        OBJECT IDENTIFIER ::= { swhub 78 }
        at-8016F        OBJECT IDENTIFIER ::= { swhub 79 }
        at-8026FC       OBJECT IDENTIFIER ::= { swhub 80 }
        

-- Groups supported in this version of the MIB

        atiswitchSysGroup               OBJECT IDENTIFIER ::= { atiSwitchMib 1 }
        
        atiswitchConfigGroup            OBJECT IDENTIFIER ::= { atiSwitchMib 2 }
        
        atiswitchPortGroup              OBJECT IDENTIFIER ::= { atiSwitchMib 3 }
        
        atiswitchVlanConfigGroup        OBJECT IDENTIFIER ::= { atiSwitchMib 4 }
        
        atiswitchEthernetStatsGroup     OBJECT IDENTIFIER ::= { atiSwitchMib 5 }
        
        atiswitchEthPortStatsGroup      OBJECT IDENTIFIER ::= { atiSwitchMib 6 }

        atiswitchFwdVlanGroup           OBJECT IDENTIFIER ::= { atiSwitchMib 7 }
        
        atiswitchStaticMACGroup         OBJECT IDENTIFIER ::= { atiSwitchMib 8 }
        
        atiswitchTraps                  OBJECT IDENTIFIER ::= { atiSwitchMib 9 }
                
                 
--
-- atiswitchSysGroup (System group)
--

atiswitchProductType    OBJECT-TYPE
        SYNTAX          INTEGER {
                                at8024 (1),
                                at8024GB (2),
                                at8024M (3),
                                at8016F (4),
                                at8026FC (5),
                                other (20)
                                }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This object identifies the Product Type."
        ::= { atiswitchSysGroup 1 }


atiswitchBasePortCount  OBJECT-TYPE
        SYNTAX          Integer32       
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This object determines the number of base 
                Ethernet ports in the switch."
        ::= {atiswitchSysGroup 2 }
        

atiswitchUplinkPortCount        OBJECT-TYPE
        SYNTAX          Integer32       
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This object determines the total number of uplink 
                ports available in the switch."
        ::= {atiswitchSysGroup 3 }


atiswitchReset          OBJECT-TYPE
        SYNTAX          INTEGER {
                                switchnoreset (1),
                                switchreset (2)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "Setting this object to switchreset will cause the 
                switch to perform a soft reboot. Setting this object 
                to switch_no_reset will have no effect."
        ::= { atiswitchSysGroup 4 }


atiswitchUplink1Type       OBJECT-TYPE
        SYNTAX          INTEGER {
                                copper (1),
                                fiber (2),
                                none (3)
                                }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This object returns the MDA (Media Dependant Adapter) 
                type of Uplink port 1. If there is no uplink installed 
                it will return a value of none."
        ::= { atiswitchSysGroup 5 }
        

atiswitchUplink2Type       OBJECT-TYPE
        SYNTAX          INTEGER {
                                copper (1),
                                fiber (2),
                                none (3)
                                }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This object returns the MDA (Media Dependant Adapter) 
                type of Uplink port 2. If there is no uplink installed 
                it will return a value of none."
        ::= { atiswitchSysGroup 6 }
        

atiswitchSwGroup        OBJECT IDENTIFIER ::= { atiswitchSysGroup 7 }
atiswitchIpGroup        OBJECT IDENTIFIER ::= { atiswitchSysGroup 8 }
atiswitchNMGroup        OBJECT IDENTIFIER ::= { atiswitchSysGroup 9 }


--
-- atiswitchSwGroup (Information about the software version running in 
-- the switch)
--

atiswitchSw             OBJECT-TYPE
        SYNTAX          DisplayString (SIZE(0..255))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Identifies the name of the software running in the 
                switch."
        ::= { atiswitchSwGroup 1 }


atiswitchSwVersion      OBJECT-TYPE
        SYNTAX          DisplayString   (SIZE(0..255))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Identifies the version number of the software running 
                in the switch."
        ::= { atiswitchSwGroup 2 }

--
-- atiswitchIpGroup (The Ip Group)
-- 

atiswitchConfigIpAddress        OBJECT-TYPE
        SYNTAX          IpAddress
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "IP address of the switch."
        ::= { atiswitchIpGroup 1 }
                

atiswitchConfigSubMask          OBJECT-TYPE
        SYNTAX          IpAddress
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "Subnet mask of the switch."
        ::= { atiswitchIpGroup 2 }
                

atiswitchConfigRouting  OBJECT-TYPE 
        SYNTAX          IpAddress
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "Gateway address for the switch." 
        ::= { atiswitchIpGroup 3 }
        

atiswitchIPAddressStatus        OBJECT-TYPE
        SYNTAX          INTEGER {
                                fromDhcp (1),
                                fromBootp (2),
                                fromStatic (3)
                                }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The IP Address can be obtained/configured through 
                different ways - through DHCP, through Bootp or 
                through a static configuration. This object specifies 
                how the IP address, subnet mask and the gateway address
                currently used by the switch was configured/obtained."
        ::= {atiswitchIpGroup 4 }


atiswitchDNServer       OBJECT-TYPE
        SYNTAX          IpAddress
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This attribute specifies the DNS server address for the
                switch."
        ::= { atiswitchIpGroup 5 }


atiswitchDefaultDomainName      OBJECT-TYPE
        SYNTAX                  DisplayString
        MAX-ACCESS              read-write
        STATUS                  current
        DESCRIPTION
                "This attribute specifies the default Domain Name for 
                the switch."
        ::= { atiswitchIpGroup 6 }


--
-- atiswitchNMGroup (SNMP Group Network Management related MIB objects)
--

atiswitchNwMgrTable     OBJECT-TYPE
        SYNTAX          SEQUENCE OF AtiswitchNwMgrEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "This table contains the list of IP Addresses 
                (management stations) to which SNMP Traps are sent.
                The maximum number of entries in the table is 4."
        ::= { atiswitchNMGroup 1 }


atiswitchNwMgrEntry     OBJECT-TYPE
        SYNTAX          AtiswitchNwMgrEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "An entry of atiswitchNwMgrTable specifying each 
                management station to which a SNMP trap is sent."
        INDEX { atiswitchNwMgrIndex }
        ::= { atiswitchNwMgrTable 1 }


AtiswitchNwMgrEntry ::=
        SEQUENCE{
                atiswitchNwMgrIndex     INTEGER,
                atiswitchNwMgrIpAddr    IpAddress
                }
                

atiswitchNwMgrIndex     OBJECT-TYPE
        SYNTAX          INTEGER (1..4)
        MAX-ACCESS      read-only
        STATUS  current
        DESCRIPTION
                "The index for the management station entry."
        ::= { atiswitchNwMgrEntry 1 }

        
atiswitchNwMgrIpAddr    OBJECT-TYPE
        SYNTAX          IpAddress
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "The IP address of the management station."
        ::= { atiswitchNwMgrEntry 2 }   


--
-- atiswitchConfigGroup
--

atiswitchMirrorState    OBJECT-TYPE
        SYNTAX          INTEGER {
                                receive(1),
                                transmit(2),
                                both(3),
                                disabled(4)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "If the attribute is set to one of the first three 
                values, then port mirroring is enabled. If disabled, 
                port operation works nomally. No traffic gets mirrored."
        ::= { atiswitchConfigGroup 1 }
        

atiswitchMirroringSourcePorts   OBJECT-TYPE
        SYNTAX                  DisplayString       
        MAX-ACCESS              read-write
        STATUS                  current
        DESCRIPTION
                "This attribute identifies the source ports which are
                mirrored. All packets received, transmitted or both on 
                these ports gets mirrored on to the destination port. 
                It's value can be a single port number or a contiguous 
                range of ports (eg. 1-5). This attribute will have an 
                empty string when port mirroring is disabled."
        ::= { atiswitchConfigGroup 2 }


atiswitchMirroringDestinationPort       OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This attribute identifies the destination port number 
                which mirrors the source port. All packets received, 
                transmitted or both on the source port gets mirrored on 
                to this port. This attribute will have the value 0 when 
                port mirroring is disabled."
        ::= { atiswitchConfigGroup 3 }


atiswitchSecurityConfig OBJECT-TYPE
        SYNTAX          INTEGER {
                                disabled (1),
                                enabledLearningLocked (2),
                                enabledLimited (3),
                                enabledSecured (4)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This attribute is a port security configuration object.
                Setting the value to 'disabled' will allow the switch to 
                learn new MAC addresses as they come in. In
                enabledLearningLocked mode, the device will stop 
                learning new addresses and the old addresses that the 
                device has learned will be locked. In enabledLimited 
                mode, only a limited number of addresses will be 
                learned. In enabledSecured mode, the administrator 
                is responsible for entering the MAC addresses manually.
                By doing this, the administrator knows exactly who is 
                connecting to the switch."
        ::= { atiswitchConfigGroup 4 }


atiswitchSecurityAction OBJECT-TYPE
        SYNTAX          INTEGER {
                                sendTrapOnly(1),
                                disablePortOnly(2),
                                disablePortAndSendTrap(3),
                                doNothing(4)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This attribute identifies the security action taken in 
                case of an intruder detected."
        ::= { atiswitchConfigGroup 5 }
        

--
-- atiswitchPortGroup (This subgroup contains basic port configuration 
-- parameters)
--

atiswitchPortTable      OBJECT-TYPE
        SYNTAX          SEQUENCE OF AtiswitchPortEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "This table contains all the type of devices supported 
                by this MIB."
        ::= { atiswitchPortGroup 1 }


atiswitchPortEntry      OBJECT-TYPE
        SYNTAX          AtiswitchPortEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "The device type in the DeviceTable."
        INDEX   { atiswitchPortNumber }
        ::= { atiswitchPortTable 1 }


AtiswitchPortEntry ::= 
        SEQUENCE {
                atiswitchPortNumber
                        Integer32,
                atiswitchPortName
                        DisplayString,
                atiswitchPortAutosenseOrHalfDuplex
                        INTEGER,
                atiswitchPortLinkState
                        INTEGER,
                atiswitchPortDuplexStatus
                        INTEGER,
                atiswitchPortSpeed
                        INTEGER,
                atiswitchPortState
                        INTEGER,
                atiswitchPortFlowControlConfig
                        INTEGER,
                atiswitchPortBackPressureConfig
                        INTEGER,
                atiswitchPortVlanTagPriorityConfig
                        INTEGER,
                atiswitchPortCOSPriorityConfig
                        INTEGER,
                atiswitchPortBroadcastConfig
                        INTEGER,
                atiswitchPortReset
                        INTEGER
                }


atiswitchPortNumber     OBJECT-TYPE
        SYNTAX          INTEGER (1..65535) 
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                " The object identifies the port of the switch."
        ::= { atiswitchPortEntry 1 }


atiswitchPortName       OBJECT-TYPE
        SYNTAX          DisplayString (SIZE(0..20))
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This attribute associates a user defined string name 
                with the port."
        ::= { atiswitchPortEntry 2 }


atiswitchPortAutosenseOrHalfDuplex      OBJECT-TYPE
        SYNTAX          INTEGER {
                                portAutoSense(1),
                                forceHalfDuplex-10M(2),
                                forceHalfDuplex-100M(3),
                                forceFullDuplex-10M(4),
                                forceFullDuplex-100M(5),
                                forceHalfDuplex-1G(6),
                                forceFullDuplex-1G(7)                           
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This object allows an admin request to configure 
                whether this port is set to autosense or one of the 
                different speed/duplex combinations."
        ::= { atiswitchPortEntry 3 }


atiswitchPortLinkState  OBJECT-TYPE
        SYNTAX          INTEGER {
                                online (1),
                                offline (2)
                                }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This attribute allows an admin request to read the 
                status of link state on this port."
        ::= { atiswitchPortEntry 4 }


atiswitchPortDuplexStatus       OBJECT-TYPE
        SYNTAX          INTEGER {
                                fullDuplex(1),
                                halfDuplex(2),
                                autosense(3)
                                }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This object allows an admin request to read the status 
                of Duplex on this port."
        ::= { atiswitchPortEntry 5 }


atiswitchPortSpeed      OBJECT-TYPE
        SYNTAX          INTEGER {
                                tenMBits (1),
                                hundredMBits (2),
                                gigaBits (3),
                                unknown (4)
                                }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This attribute allows an admin request to read the 
                speed of this port."
        ::= { atiswitchPortEntry 6 }


atiswitchPortState      OBJECT-TYPE
        SYNTAX          INTEGER {
                                enabled (1),
                                disabled (2),
                                blocking (3),
                                listening (4),
                                learning (5),
                                unknown(6)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION     
                "This attribute allows an admin request to disable or 
                enable communications on this port. It also responds 
                with the status of the port. Except enabled(1) and 
                disabled(2), all values are read-only status."
        ::= { atiswitchPortEntry 7 }


atiswitchPortFlowControlConfig  OBJECT-TYPE 
        SYNTAX          INTEGER {
                                disable(1),
                                transmit-only(2),
                                receive-only(3),
                                transmit-and-receive(4),
                                unknown(5)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This per port attribute determines whether the port 
                has flow control enabled or not. By default, flow 
                control is disabled."
        ::= { atiswitchPortEntry 8 }
        
        
atiswitchPortBackPressureConfig OBJECT-TYPE
       SYNTAX           INTEGER {
                                disable(1),
                                enable(2),
                                unknown(3)
                                }
       MAX-ACCESS       read-write
       STATUS           current
       DESCRIPTION 
                 "This per-port attribute describes whether the port 
                 identified has Back Pressure Enabled or not.By 
                 default, Back Pressure is Disabled."
           ::= { atiswitchPortEntry 9 }

        
atiswitchPortVlanTagPriorityConfig  OBJECT-TYPE
        SYNTAX          INTEGER {
                                use-vlan-priority(1),
                                override-vlan-priority(2)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION 
                "This per-port attribute allows the configuration of the
                Tag Priority to be Override or use the Tag Priority. By 
                Default, all ports use Vlan Tag priority."
        ::= { atiswitchPortEntry 10 }
           

atiswitchPortCOSPriorityConfig  OBJECT-TYPE
        SYNTAX          INTEGER(0..7)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION 
                "This per-port attribute allows the configuration of the
                priority of the port. There are 8 priorities as per the
                IEEE standard with 0 being the lowest priority and 7 the
                highest. In a switch environment, ports with higher 
                priority has it's to and from traffic given higher 
                priority when compared with those with lower priority."
        ::= { atiswitchPortEntry 11 }
        

atiswitchPortBroadcastConfig  OBJECT-TYPE
        SYNTAX          INTEGER {
                                discard-broadcasts(1),
                                do-not-discard-broadcasts(2)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION 
                "This per-port attribute determines if broadcast 
                packets received should be discarded or 
                processed. By default, they will be processed."
        ::= { atiswitchPortEntry 12 }


atiswitchPortReset      OBJECT-TYPE
        SYNTAX          INTEGER {
                                reset(1),
                                no-reset(2)
                                }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION 
                "This per-port attribute resets the port to the 
                original default configuration.This can prove 
                useful in situations where a port is experiencing 
                a problem making a valid connection to the end node.
                Setting the value to 'no-reset' has no effect."
        ::= { atiswitchPortEntry 13 }


--
-- atiswitchVlanConfigGroup (Vlan configuration group)
--

-- Virtual LAN table

atiswitchBasicVlanTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF AtiswitchBasicVlanEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "Table of Virtual LANs configured in the switch."
        ::= { atiswitchVlanConfigGroup 1 }


atiswitchBasicVlanEntry OBJECT-TYPE
        SYNTAX          AtiswitchBasicVlanEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "An entry describing the configured Virtual LAN."
        INDEX           { atiswitchBeVlanIndex }
        ::= { atiswitchBasicVlanTable 1 }


AtiswitchBasicVlanEntry ::= SEQUENCE {
                atiswitchBeVlanIndex
                        INTEGER,
                atiswitchBeVlanName
                        DisplayString,
                atiswitchBeVlanTagId
                        INTEGER,
                atiswitchBeVlanTaggedPortMask
                        DisplayString,
                atiswitchBeVlanUntaggedPortMask
                        DisplayString,
                atiswitchBeVlanMirrorPort
                        INTEGER,
                atiswitchBeVlanRowStatus
                        RowStatus
                }


atiswitchBeVlanIndex    OBJECT-TYPE
        SYNTAX          INTEGER (1..64)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Index of the Virtual LAN entry. Maximum number of 
                Virtual LANs in 8024/8024GB is 32."
        ::= { atiswitchBasicVlanEntry 1 }


atiswitchBeVlanName     OBJECT-TYPE
        SYNTAX          DisplayString (SIZE (0..20) )
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
                "Name of the Virtual LAN."
        ::= { atiswitchBasicVlanEntry 2 }
        

atiswitchBeVlanTagId    OBJECT-TYPE
        SYNTAX          INTEGER (1..4095)
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
                "VId of the Virtual LAN as stored in the tag information
                header in accordance with 802.1q specification."
        ::= { atiswitchBasicVlanEntry 3 }
        

atiswitchBeVlanTaggedPortMask   OBJECT-TYPE
        SYNTAX                  DisplayString
        MAX-ACCESS              read-create
        STATUS                  current
        DESCRIPTION
                "List of tagged ports in the Virtual LAN."
        ::= { atiswitchBasicVlanEntry 4 }
        

atiswitchBeVlanUntaggedPortMask OBJECT-TYPE
        SYNTAX                  DisplayString
        MAX-ACCESS              read-create
        STATUS                  current
        DESCRIPTION
                "List of untagged ports in the Virtual LAN."
        ::= { atiswitchBasicVlanEntry 5 }
        

atiswitchBeVlanMirrorPort       OBJECT-TYPE
        SYNTAX                  INTEGER (0..65535)
        MAX-ACCESS              read-create
        STATUS                  current
        DESCRIPTION
                "Port number on which all Virtual LAN traffic is 
                mirrored on. By default the value is 0 indicating no 
                port mirroring."
        ::= { atiswitchBasicVlanEntry 6 }
    

atiswitchBeVlanRowStatus        OBJECT-TYPE
        SYNTAX                  RowStatus
        MAX-ACCESS              read-create
        STATUS                  current
        DESCRIPTION
                "Indicates the status of this entry. This object is 
                used to create, modify or delete Virtual LAN entries 
                as per the RowStatus specification of SMIv2. There 
                are two ways to create a Virtual LAN entry - 
                CreateAndGo (Used when all objects of the entry are 
                set at one go) and CreateAndWait (Used when individual 
                objects are set independently).
                
                CreateAndGo method:
                Assign values to all objects of the Virtual LAN entry.
                Set this object to CreateAndGo(4).
                
                CreateAndWait method:
                Set this object to CreateAndWait(5).
                Set individual object entries.
                When all other entries are set, set this object to 
                Active(1).
                
                To delete a Virtual LAN entry, set this object to 
                destroy(6)."
        ::= { atiswitchBasicVlanEntry 7 }


-- Port to Vlan Table

atiswitchPort2VlanTable         OBJECT-TYPE
        SYNTAX                  SEQUENCE OF AtiswitchPort2VlanEntry
        MAX-ACCESS              not-accessible
        STATUS                  current
        DESCRIPTION
                "Table of per port Virtual LAN configuration."
        ::= { atiswitchVlanConfigGroup 2 }
        

atiswitchPort2VlanEntry         OBJECT-TYPE
        SYNTAX                  AtiswitchPort2VlanEntry
        MAX-ACCESS              not-accessible
        STATUS                  current
        DESCRIPTION
                "An entry in the table, containing per port Virtual LAN 
                information."
        INDEX           { atiswitchPvPortNumber }
        ::= { atiswitchPort2VlanTable 1 }


AtiswitchPort2VlanEntry ::= SEQUENCE {
                atiswitchPvPortNumber
                        Integer32,
                atiswitchPvVlanName
                        DisplayString
                }


atiswitchPvPortNumber   OBJECT-TYPE
        SYNTAX          INTEGER (1..65535)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This object identifies the port on the switch."
        ::= { atiswitchPort2VlanEntry 1 }


atiswitchPvVlanName     OBJECT-TYPE
        SYNTAX          DisplayString
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "This object identifies the Virtual LAN name to which 
                the port belongs to."
        ::= { atiswitchPort2VlanEntry 2 }


--
-- atiswitchEthernetStatsGroup (This monitor group contains statistics 
-- measured for the switch as a whole)
--
                

atiswitchEthMonStats    OBJECT IDENTIFIER ::= { atiswitchEthernetStatsGroup 1 }
atiswitchEthErrorStats  OBJECT IDENTIFIER ::= { atiswitchEthernetStatsGroup 2 }


atiswitchEthMonRxGoodFrames     OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of good frames received on the switch."
        ::= { atiswitchEthMonStats 1 }


atiswitchEthMonTxGoodFrames     OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     
                "The total number of good frames that has been 
                transimitted by the switch."
        ::= { atiswitchEthMonStats 2 }
        

atiswitchEthMonTxTotalBytes     OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     
                "The total number of bytes transimitted from the switch."
        ::= { atiswitchEthMonStats 3 }


atiswitchEthMonTxDeferred       OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The number of times a transmission attempt failed 
                because of the medium being busy."
        ::= { atiswitchEthMonStats 4 }


atiswitchEthMonTxCollisions     OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of collisions detected while 
                transmitting from the switch."
        ::= { atiswitchEthMonStats 5 }
        

atiswitchEthMonTxBroadcastFrames        OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION 
                "The total number of Transmit Broadcast Frames while 
                switching."
        ::= { atiswitchEthMonStats 6 }
        

atiswitchEthMonTxMulticastFrames        OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION 
                "The total number of Transmit Multicast frames while 
                switching."
        ::= { atiswitchEthMonStats 7 }


atiswitchEthMonRxOverruns        OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION 
                "The total number of Received Overrun Frames while 
                switching."
        ::= { atiswitchEthMonStats 8 }


--
-- atiswitchEthErrorStats (Ethernet Error Statistics for the switch as 
-- a whole)
--

atiswitchEthErrorCRC    OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of CRC errors on received packets."
        ::= { atiswitchEthErrorStats 1 }


atiswitchEthErrorAlignment      OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of packets received that has 
                alignment errors."       
        ::= { atiswitchEthErrorStats 2 }


atiswitchEthErrorRxBadFrames    OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of bad frames received."
        ::= { atiswitchEthErrorStats 3 }


atiswitchEthErrorLateCollision  OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The number of times collision was detected in the 
                switch."
        ::= { atiswitchEthErrorStats 4 }


atiswitchEthErrorTxTotal        OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     
                "Total number of errors resulting from transmit 
                operations."
        ::= { atiswitchEthErrorStats 5 }

        
--
-- atiswitchEthPortStatsGroup (This monitor group contains statistics 
-- measured per port)
--

atiswitchEthPortMonStats   OBJECT IDENTIFIER ::= { atiswitchEthPortStatsGroup 1 }
atiswitchEthPortError      OBJECT IDENTIFIER ::= { atiswitchEthPortStatsGroup 2 }


atiswitchEthPortMonTable        OBJECT-TYPE
        SYNTAX          SEQUENCE OF AtiswitchEthPortMonEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     
                "A list of statistics entry for each port."
        ::= { atiswitchEthPortMonStats 1 }


atiswitchEthPortMonEntry        OBJECT-TYPE
        SYNTAX          AtiswitchEthPortMonEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "A colletion of statistics kept for a particular port."
        INDEX   { atiswitchEthPortMonId }
        ::= { atiswitchEthPortMonTable 1 }


AtiswitchEthPortMonEntry ::=
        SEQUENCE        {
                        atiswitchEthPortMonId
                                Integer32,
                        atiswitchEthPortMonRxGoodFrames
                                Counter32,
                        atiswitchEthPortMonTxGoodFrames
                                Counter32,
                        atiswitchEthPortMonTxTotalBytes
                                Counter32,
                        atiswitchEthPortMonTxDeferred
                                Counter32,
                        atiswitchEthPortMonTxCollisions
                                Counter32, 
                        atiswitchEthPortMonTxBroadcastFrames
                                Counter32,
                        atiswitchEthPortMonTxMulticastFrames
                                Counter32,
                        atiswitchEthPortMonRxOverruns
                                Counter32
                        }


atiswitchEthPortMonId   OBJECT-TYPE
        SYNTAX          INTEGER (1..65535)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Port number."
        ::= { atiswitchEthPortMonEntry 1 }


atiswitchEthPortMonRxGoodFrames         OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of good frames received on this port."
        ::= { atiswitchEthPortMonEntry 2 }


atiswitchEthPortMonTxGoodFrames OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of good frames transmitted from this 
                port."
        ::= { atiswitchEthPortMonEntry 3 }


atiswitchEthPortMonTxTotalBytes OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of bytes transmitted from this port."
        ::= { atiswitchEthPortMonEntry 4 }
        

atiswitchEthPortMonTxDeferred OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION 
                "This is the count of first time Transmission attempt 
                which failed on an interface due to medium being busy."
        ::= { atiswitchEthPortMonEntry 5 }
        

atiswitchEthPortMonTxCollisions OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION 
                "The total number of collisions while switching on an 
                interface."
        ::= { atiswitchEthPortMonEntry 6 }


atiswitchEthPortMonTxBroadcastFrames    OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of broadcast frames transmitted from 
                this port."
        ::= { atiswitchEthPortMonEntry 7 }


atiswitchEthPortMonTxMulticastFrames    OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of multicast frames transmitted from 
                this port."
        ::= { atiswitchEthPortMonEntry 8 }


atiswitchEthPortMonRxOverruns   OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The total number of over sized frames received on this 
                port."
        ::= { atiswitchEthPortMonEntry 9 }


--
--atiswitchEthPortError (Error statistics per port)
--

atiswitchEthPortErrorTable      OBJECT-TYPE
        SYNTAX          SEQUENCE OF AtiswitchEthPortErrorEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "A list of statistics entries."
        ::= { atiswitchEthPortError 1 }


atiswitchEthPortErrorEntry      OBJECT-TYPE
        SYNTAX          AtiswitchEthPortErrorEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "A collection of statistics kept for a particular port."
        INDEX   { atiswitchEthPortErrorId }
        ::= { atiswitchEthPortErrorTable 1 }


AtiswitchEthPortErrorEntry ::=
                SEQUENCE {
                         atiswitchEthPortErrorId
                         Integer32,
                         atiswitchEthPortErrorRxBadFrames
                         Counter32,
                         atiswitchEthPortErrorTxTotal
                         Counter32
                         }
                         
atiswitchEthPortErrorId         OBJECT-TYPE
        SYNTAX          INTEGER (1..65535)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Port number."
        ::= { atiswitchEthPortErrorEntry 1 }


atiswitchEthPortErrorRxBadFrames        OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Total number of bad Frames received on this port."
        ::= { atiswitchEthPortErrorEntry 2 }
        

atiswitchEthPortErrorTxTotal    OBJECT-TYPE
        SYNTAX          Counter32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     
                "Total number of errors resulting from transmit 
                operations."
        ::= { atiswitchEthPortErrorEntry 3 }


--
-- atiswichFwdVlanGroup (VLAN to MAC address association)
--
        
atiswitchFwdVlanTable   OBJECT-TYPE
        SYNTAX          SEQUENCE OF AtiswitchFwdVlanEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "This table associates MAC addresses (as stored in the 
                forwarding table of the switch) to the Virtual LAN to 
                which it belongs."
        ::= { atiswitchFwdVlanGroup 1 }


atiswitchFwdVlanEntry   OBJECT-TYPE
        SYNTAX          AtiswitchFwdVlanEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "Entry in the atiswitchFwdVlanTable."
        INDEX   { atiswitchFwdVlanMACAddr }
        ::= { atiswitchFwdVlanTable 1 }
        

AtiswitchFwdVlanEntry   ::=   SEQUENCE  {
                atiswitchFwdVlanMACAddr
                        MACAddress,
                atiswitchFwdVlanVlanId
                        Integer32,
                atiswitchFwdVlanAge
                        Integer32,
                atiswitchFwdVlanStatus
                        INTEGER,
                atiswitchFwdVlanPort
                        Integer32
                }
                

atiswitchFwdVlanMACAddr OBJECT-TYPE
        SYNTAX          MACAddress
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "A MAC address from the forwarding table of the switch."
        ::= { atiswitchFwdVlanEntry 1 }


atiswitchFwdVlanVlanId  OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The Virtual LAN to which atiswitchFwdVlanMACAddr 
                belongs to."
        ::= { atiswitchFwdVlanEntry 2 }


atiswitchFwdVlanAge     OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Current age of the MAC Address in the forwarding table 
                - 0 indicates it is still active, 1 indicates that the 
                address has aged out."
        ::= { atiswitchFwdVlanEntry 3 }
        

atiswitchFwdVlanStatus  OBJECT-TYPE
        SYNTAX  INTEGER {
                        inactive(1),
                        active(2),
                        other(3)
                        }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Status of the MAC address - inactive (1): It is no 
                longer valid e.g, it was learned and has since aged 
                out, but has not yet been flushed from the table, 
                active (2): Learned or statically assigned and 
                currently in use and other (3): Neither of the other 
                two."
        ::= { atiswitchFwdVlanEntry 4 }


atiswitchFwdVlanPort    OBJECT-TYPE
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Either the value 0, or the port number of the port on 
                which a frame having a source address equal to the 
                atiswitchFwdVlanMACAddr has been seen. A value of 0 
                indicates that the port number has not been learned but 
                that the bridge does have some forwarding/filtering 
                information about this address."
        ::= { atiswitchFwdVlanEntry 5 }
        
--
-- Static MAC Table
--

atiswitchStaticMACTable OBJECT-TYPE
        SYNTAX  SEQUENCE        OF      AtiswitchStaticMACEntry
        MAX-ACCESS      not-accessible
        STATUS  current
        DESCRIPTION
                "This tables lists MAC addresses lexicographically from 
                the static table which binds MAC address to ports on 
                the switch."
        ::= { atiswitchStaticMACGroup 1 }


atiswitchStaticMACEntry OBJECT-TYPE
        SYNTAX  AtiswitchStaticMACEntry
        MAX-ACCESS      not-accessible
        STATUS  current
        DESCRIPTION
                "Entry in the atiswitchStaticMACTable."
        INDEX   { atiswitchStaticMACAddress }
        ::= { atiswitchStaticMACTable 1 }


AtiswitchStaticMACEntry ::=
        SEQUENCE {
                atiswitchStaticMACAddress
                        MACAddress,
                atiswitchStaticMACPortNumber
                        INTEGER,
                atiswitchStaticMACEntryStatus
                        INTEGER
        }


atiswitchStaticMACAddress       OBJECT-TYPE
        SYNTAX          MACAddress
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This object identifies the MAC address associated with 
                Static MAC table."
        ::= { atiswitchStaticMACEntry 1 }


atiswitchStaticMACPortNumber    OBJECT-TYPE
        SYNTAX          INTEGER (1..65535)
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
                "This object identifies the port for which the MAC 
                address is associated statically in the MAC Table."
        ::= { atiswitchStaticMACEntry 2 }


atiswitchStaticMACEntryStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                           valid(1),
                           invalid(2)
                        }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
              "The status of this entry.  The meanings of the values 
              are:
              valid(1)   : This entry is valid.
              invalid(2) : This entry is no longer valid, but has not 
                           yet been flushed from the table."
        ::= { atiswitchStaticMACEntry 3 }


--
-- Enterprise traps
--

atiswitchFanStopTrap    NOTIFICATION-TYPE
        STATUS          current
        DESCRIPTION
                "Trap sent when an error in the fan operation is 
                detected."
        ::= { atiswitchTraps 1 }


atiswitchTemperatureAbnormalTrap        NOTIFICATION-TYPE
        STATUS          current
        DESCRIPTION
                "Trap sent when the temperature of the switch is 
                abnormal."
        ::= { atiswitchTraps 2 }
        
END