path: root/MIBS/accedian/ACD-FILTER-MIB

--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2011, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--


ACD-FILTER-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    IpAddress, Unsigned32
        FROM SNMPv2-SMI
    DisplayString, TruthValue, MacAddress, TEXTUAL-CONVENTION, RowStatus
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    acdMibs
        FROM ACCEDIAN-SMI;

acdFilter MODULE-IDENTITY

    LAST-UPDATED "201110100100Z"
    ORGANIZATION "Accedian Networks, Inc."
    CONTACT-INFO
            "Accedian Technical Assistance Center
             Accedian Networks, Inc.
             4878 Levy, suite 202
             Saint-Laurent, Quebec Canada H4R 2P1
             E-mail: support@accedian.com"
    DESCRIPTION
            "The Filter database for this Accedian Networks device."

    REVISION "201110100100Z"        -- 10 October 2011
    DESCRIPTION
            "Add acdSmapL2FilterTableLastChangeTid and
             acdSmapIPv4FilterTableLastChangeTid.
             
             Deprecated acdL2FilterTable and acdIPv4FilterTable tables."

    REVISION "201011100100Z"        -- 10 November 2010
    DESCRIPTION
            "Add compliance section."

    REVISION "200805010100Z"        -- 1 May 2008
    DESCRIPTION
            "Add SMAP filter tables and RowStatus in acdL2FilterTable and
             acdIPv4FilterTable tables."

    REVISION "200608060100Z"        -- 6 Aug 2006
    DESCRIPTION
            "Initial version of MIB module ACD-FILTER-MIB."

    ::= { acdMibs 2 }

acdFilterNotifications   OBJECT IDENTIFIER ::= { acdFilter 5 }
acdFilterMIBObjects      OBJECT IDENTIFIER ::= { acdFilter 6 }
acdFilterConformance     OBJECT IDENTIFIER ::= { acdFilter 7 }

acdFilterTableTid        OBJECT IDENTIFIER ::= { acdFilterMIBObjects 1 }

---------------------------------------------------------------------------
-- Textual conventions
---------------------------------------------------------------------------

AcdFilterOperator ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Operator for field comparaison. Valid operator types are:
        Greater than, Less than, Equal to or Range (inclusive range)."
    SYNTAX      INTEGER {
                    lessThan(1),
                    greaterThan(2),
                    equalTo(3),
                    range(4)
    }

AcdFilterVlanType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "."
    SYNTAX      INTEGER {
                    cvlan(1),
                    svlan(2),
                    both(3)
    }
---------------------------------------------------------------------------
 -- The L2 table
 -- This table contains all Layer 2 Filters.
---------------------------------------------------------------------------

acdL2FilterTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdL2FilterEntry
    MAX-ACCESS  not-accessible
    STATUS      deprecated
    DESCRIPTION
        "Table of all Layer 2 filters"
    ::= { acdFilter 1 }

acdL2FilterEntry OBJECT-TYPE
    SYNTAX      AcdL2FilterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A Filter is a pattern matching a definition against packets."
    INDEX   { acdL2FilterID }
    ::=  { acdL2FilterTable 1 }


AcdL2FilterEntry ::= SEQUENCE {
    acdL2FilterID               Unsigned32,
    acdL2FilterName             DisplayString,
    acdL2FilterMacDstEn         TruthValue,
    acdL2FilterMacDst           MacAddress,
    acdL2FilterMacDstMask       Unsigned32,
    acdL2FilterMacSrcEn         TruthValue,
    acdL2FilterMacSrc           MacAddress,
    acdL2FilterMacSrcMask       Unsigned32,
    acdL2FilterEtypeEn          TruthValue,
    acdL2FilterEtype            Unsigned32,
    acdL2FilterVlan1PriorEn     TruthValue,
    acdL2FilterVlan1Prior       Unsigned32,
    acdL2FilterVlan1CfiEn       TruthValue,
    acdL2FilterVlan1Cfi         Unsigned32,
    acdL2FilterVlan1IdEn        TruthValue,
    acdL2FilterVlan1Id          Unsigned32,
    acdL2FilterVlan2PriorEn     TruthValue,
    acdL2FilterVlan2Prior       Unsigned32,
    acdL2FilterVlan2CfiEn       TruthValue,
    acdL2FilterVlan2Cfi         Unsigned32,
    acdL2FilterVlan2IdEn        TruthValue,
    acdL2FilterVlan2Id          Unsigned32,
    acdL2FilterRowStatus        RowStatus
}

acdL2FilterID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each filter. Its value ranges from 1 to maximum
         value. This maximum  value depend of the type of platform."
   ::= { acdL2FilterEntry 1 }

acdL2FilterName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is a string to identify the filter."
    ::= { acdL2FilterEntry 2 }

acdL2FilterMacDstEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the destination MAC address check."
    DEFVAL      { false }
    ::= { acdL2FilterEntry 3 }

acdL2FilterMacDst OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The destination MAC address used to compare the incoming traffic."
    DEFVAL { '000000000000'H }
    ::= { acdL2FilterEntry 4 }

acdL2FilterMacDstMask OBJECT-TYPE
    SYNTAX      Unsigned32 (0..48)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Number of destination MAC address bits to compare. Its value ranges
         from 0 to 48. Only specific mask are valid per platform."
    DEFVAL      { 48 }
    ::= { acdL2FilterEntry 5 }

acdL2FilterMacSrcEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the source MAC address check."
    DEFVAL      { false }
    ::= { acdL2FilterEntry 6 }

acdL2FilterMacSrc OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The source MAC address used to compare the incoming traffic."
    DEFVAL { '000000000000'H }
    ::= { acdL2FilterEntry 7 }

acdL2FilterMacSrcMask OBJECT-TYPE
    SYNTAX      Unsigned32 (0..48)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Number of source MAC address bits to compare. Its value ranges
         from 0 to 48. Only specific mask are valid per platform."
    DEFVAL      { 48 }
    ::= { acdL2FilterEntry 8 }

acdL2FilterEtypeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the Ethernet type check."
    DEFVAL      { false }
    ::= { acdL2FilterEntry 9 }

acdL2FilterEtype OBJECT-TYPE
    SYNTAX      Unsigned32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The Ethernet type used to compare the incoming traffic."
    DEFVAL      { 0 }
    ::= { acdL2FilterEntry 10 }

acdL2FilterVlan1PriorEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN priority check."
    DEFVAL      { false }
    ::= { acdL2FilterEntry 11 }

acdL2FilterVlan1Prior OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The first VLAN priority used to compare the incoming traffic.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdL2FilterEntry 12 }

acdL2FilterVlan1CfiEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN CFI check."
    DEFVAL      { false }
    ::= { acdL2FilterEntry 13 }

acdL2FilterVlan1Cfi OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The first VLAN CFI used to compare the incoming traffic.
         Its value is 0 or 1."
    DEFVAL      { 0 }
    ::= { acdL2FilterEntry 14 }

acdL2FilterVlan1IdEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN ID check."
    DEFVAL      { false }
    ::= { acdL2FilterEntry 15 }

acdL2FilterVlan1Id OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The first VLAN ID used to compare the incoming traffic.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdL2FilterEntry 16 }

acdL2FilterVlan2PriorEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN priority check."
    DEFVAL      { false }
    ::= { acdL2FilterEntry 17 }

acdL2FilterVlan2Prior OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The second VLAN priority used to compare the incoming traffic.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdL2FilterEntry 18 }

acdL2FilterVlan2CfiEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN CFI check."
    DEFVAL      { false }
    ::= { acdL2FilterEntry 19 }

acdL2FilterVlan2Cfi OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The second VLAN CFI used to compare the incoming traffic.
         Its value is 0 or 1."
    DEFVAL      { 0 }
    ::= { acdL2FilterEntry 20 }

acdL2FilterVlan2IdEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN ID check."
    DEFVAL      { false }
    ::= { acdL2FilterEntry 21 }

acdL2FilterVlan2Id OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4065)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The second VLAN ID used to compare the incoming traffic.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdL2FilterEntry 22 }

acdL2FilterRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "All columns must have a valid value before a row can be activated. To
        create a new filter you shall provide the a unique filter name for
        an empty row with the RowStatus set to Create and Go. To delete the
        row you need to set the RowStatus to destroy."
    ::= { acdL2FilterEntry 23 }

---------------------------------------------------------------------------
 -- The IPv4 table
 -- This table contains all IPv4 Filters.
---------------------------------------------------------------------------

acdIPv4FilterTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdIPv4FilterEntry
    MAX-ACCESS  not-accessible
    STATUS      deprecated
    DESCRIPTION
        "Table of all IPv4 filters"
    ::= { acdFilter 2 }

acdIPv4FilterEntry OBJECT-TYPE
    SYNTAX      AcdIPv4FilterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A Filter is a pattern matching a definition against packets."
    INDEX   { acdIPv4FilterID }
    ::=  { acdIPv4FilterTable 1 }

AcdIPv4FilterEntry ::= SEQUENCE {
    acdIPv4FilterID             Unsigned32,
    acdIPv4FilterName           DisplayString,
    acdIPv4FilterSrcEn          TruthValue,
    acdIPv4FilterSrc            IpAddress,
    acdIPv4FilterSrcMask        IpAddress,
    acdIPv4FilterDstEn          TruthValue,
    acdIPv4FilterDst            IpAddress,
    acdIPv4FilterDstMask        IpAddress,
    acdIPv4FilterProtoEn        TruthValue,
    acdIPv4FilterProto          Unsigned32,
    acdIPv4FilterTTLEn          TruthValue,
    acdIPv4FilterTTL            Unsigned32,
    acdIPv4FilterIHLEn          TruthValue,
    acdIPv4FilterIHL            Unsigned32,
    acdIPv4FilterDscpEn         TruthValue,
    acdIPv4FilterDscp           Unsigned32,
    acdIPv4FilterECNEn          TruthValue,
    acdIPv4FilterECN            Unsigned32,
    acdIPv4FilterSrcPortEn      TruthValue,
    acdIPv4FilterSrcPort        Unsigned32,
    acdIPv4FilterDstPortEn      TruthValue,
    acdIPv4FilterDstPort        Unsigned32,
    acdIPv4FilterIcmpTypeEn     TruthValue,
    acdIPv4FilterIcmpType       Unsigned32,
    acdIPv4FilterIcmpCodeEn     TruthValue,
    acdIPv4FilterIcmpCode       Unsigned32,
    acdIPv4FilterRowStatus      RowStatus
}

acdIPv4FilterID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each filter. Its value ranges from 1 to maximum
         value. This maximum  value depend of the type of platform."
   ::= { acdIPv4FilterEntry 1 }

acdIPv4FilterName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is a string to identify the filter."
    ::= { acdIPv4FilterEntry 2 }

acdIPv4FilterSrcEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the Source IP address check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 3 }

acdIPv4FilterSrc OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The source IP address used to compare the incoming traffic."
    DEFVAL { '00000000'H }      -- 0.0.0.0
    ::= { acdIPv4FilterEntry 4 }

acdIPv4FilterSrcMask OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The source IP address mask used to compare the incoming traffic."
    DEFVAL { 'FFFFFFFF'H }      -- 255.255.255.255
    ::= { acdIPv4FilterEntry 5 }
 
acdIPv4FilterDstEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the Destination IP address check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 6 }

acdIPv4FilterDst OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The destination IP address used to compare the incoming traffic."
    DEFVAL { '00000000'H }      -- 0.0.0.0
    ::= { acdIPv4FilterEntry 7 }

acdIPv4FilterDstMask OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The destination IP address mask used to compare the incoming
         traffic."
    DEFVAL { 'FFFFFFFF'H }      -- 255.255.255.255
    ::= { acdIPv4FilterEntry 8 }

acdIPv4FilterProtoEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the IP protocol check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 9 }

acdIPv4FilterProto OBJECT-TYPE
    SYNTAX      Unsigned32  (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The IP protocol used to compare the incoming traffic. Its value
         ranges from 0 to 255."
    DEFVAL      { 1 }
    ::= { acdIPv4FilterEntry 10 }

acdIPv4FilterTTLEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the TTL check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 11 }

acdIPv4FilterTTL OBJECT-TYPE
    SYNTAX      Unsigned32  (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The TTL used to compare the incoming traffic.
         Its value ranges from 0 to 255."
    DEFVAL      { 255 }
    ::= { acdIPv4FilterEntry 12 }

acdIPv4FilterIHLEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the IP Header Length check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 13 }

acdIPv4FilterIHL OBJECT-TYPE
    SYNTAX      Unsigned32  (5..15)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The IP Header Length used to compare the incoming traffic.
         Its value ranges from 5 to 15."
    DEFVAL      { 5 }
    ::= { acdIPv4FilterEntry 14 }

acdIPv4FilterDscpEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the DSCP (Diff-Serv Code Point) check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 15 }

acdIPv4FilterDscp OBJECT-TYPE
    SYNTAX      Unsigned32  (0..63)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The DSCP value used to compare the incoming traffic.
         Its value ranges from 0 to 63."
    DEFVAL      { 0 }
    ::= { acdIPv4FilterEntry 16 }

acdIPv4FilterECNEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the ECN (Explicite Cogestion Notification) check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 17 }

acdIPv4FilterECN OBJECT-TYPE
    SYNTAX      Unsigned32  (0..3)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The ECN value used to compare the incoming traffic.
         Its value ranges from 0 to 3."
    DEFVAL      { 0 }
    ::= { acdIPv4FilterEntry 18 }

acdIPv4FilterSrcPortEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the UDP/TCP Source port check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 19 }

acdIPv4FilterSrcPort OBJECT-TYPE
    SYNTAX      Unsigned32  (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The UDP/TCP Source Port used to compare the incoming traffic.
         Its value ranges from 0 to 65535."
    DEFVAL      { 0 }
    ::= { acdIPv4FilterEntry 20 }

acdIPv4FilterDstPortEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the UDP/TCP Destination port check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 21 }

acdIPv4FilterDstPort OBJECT-TYPE
    SYNTAX      Unsigned32  (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The UDP/TCP Destination Port used to compare the incoming traffic.
         Its value ranges from 0 to 65535."
    DEFVAL      { 0 }
    ::= { acdIPv4FilterEntry 22 }

acdIPv4FilterIcmpTypeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the ICMP type check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 23 }

acdIPv4FilterIcmpType OBJECT-TYPE
    SYNTAX      Unsigned32  (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The ICMP type used to compare the incoming traffic.
         Its value ranges from 0 to 255."
    DEFVAL      { 0 }
    ::= { acdIPv4FilterEntry 24 }

acdIPv4FilterIcmpCodeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the ICMP code check."
    DEFVAL      { false }
    ::= { acdIPv4FilterEntry 25 }

acdIPv4FilterIcmpCode OBJECT-TYPE
    SYNTAX      Unsigned32  (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The ICMP code used to compare the incoming traffic.
         Its value ranges from 0 to 255."
    DEFVAL      { 0 }
    ::= { acdIPv4FilterEntry 26 }

acdIPv4FilterRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "All columns must have a valid value before a row can be activated. To
        create a new filter you shall provide the a unique filter name for
        an empty row with the RowStatus set to Create and Go. To delete the
        row you need to set the RowStatus to destroy."
    ::= { acdIPv4FilterEntry 27 }

-----------------------------------------------------------------------
 -- The service mapping (SMAP) L2 table
 -- This table contains all SMAP Layer 2 Filters.
---------------------------------------------------------------------------

acdSmapL2FilterTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSmapL2FilterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of all service mapping (SMAP) Layer 2 filters"
    ::= { acdFilter 3 }

acdSmapL2FilterEntry OBJECT-TYPE
    SYNTAX      AcdSmapL2FilterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A Filter is a pattern matching a definition against packets."
    INDEX   { acdSmapL2FilterID }
    ::=  { acdSmapL2FilterTable 1 }


AcdSmapL2FilterEntry ::= SEQUENCE {
    acdSmapL2FilterID                Unsigned32,
    acdSmapL2FilterName              DisplayString,
    acdSmapL2FilterRowStatus         RowStatus,
    acdSmapL2FilterVlan1PriorEn      TruthValue,
    acdSmapL2FilterVlan1Prior        Unsigned32,
    acdSmapL2FilterVlan1PriorLast    Unsigned32,
    acdSmapL2FilterVlan1PriorOper    AcdFilterOperator,
    acdSmapL2FilterVlan1IdEn         TruthValue,
    acdSmapL2FilterVlan1Id           Unsigned32,
    acdSmapL2FilterVlan1IdLast       Unsigned32,
    acdSmapL2FilterVlan1IdOper       AcdFilterOperator,
    acdSmapL2FilterVlan1CfiEn        TruthValue,
    acdSmapL2FilterVlan1Cfi          Unsigned32,
    acdSmapL2FilterVlan1TypeEn       TruthValue,
    acdSmapL2FilterVlan1Type         AcdFilterVlanType,
    acdSmapL2FilterVlan2PriorEn      TruthValue,
    acdSmapL2FilterVlan2Prior        Unsigned32,
    acdSmapL2FilterVlan2PriorLast    Unsigned32,
    acdSmapL2FilterVlan2PriorOper    AcdFilterOperator,
    acdSmapL2FilterVlan2IdEn         TruthValue,
    acdSmapL2FilterVlan2Id           Unsigned32,
    acdSmapL2FilterVlan2IdLast       Unsigned32,
    acdSmapL2FilterVlan2IdOper       AcdFilterOperator,
    acdSmapL2FilterVlan2CfiEn        TruthValue,
    acdSmapL2FilterVlan2Cfi          Unsigned32,
    acdSmapL2FilterVlan2TypeEn       TruthValue,
    acdSmapL2FilterVlan2Type         AcdFilterVlanType,
    acdSmapL2FilterMacDstEn          TruthValue,
    acdSmapL2FilterMacDst            MacAddress,
    acdSmapL2FilterMacDstMask        Unsigned32,
    acdSmapL2FilterMacSrcEn          TruthValue,
    acdSmapL2FilterMacSrc            MacAddress,
    acdSmapL2FilterMacSrcMask        Unsigned32,
    acdSmapL2FilterEtypeEn           TruthValue,
    acdSmapL2FilterEtype             Unsigned32,
    acdSmapL2FilterIpCosEn           TruthValue,
    acdSmapL2FilterIpCosMode         INTEGER,
    acdSmapL2FilterDscp              Unsigned32,
    acdSmapL2FilterDscpLast          Unsigned32,
    acdSmapL2FilterDscpOper          AcdFilterOperator,
    acdSmapL2FilterPre               Unsigned32,
    acdSmapL2FilterPreLast           Unsigned32,
    acdSmapL2FilterPreOper           AcdFilterOperator
}

acdSmapL2FilterID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each filter. Its value ranges from 1 to maximum
         value. This maximum  value depend of the type of platform."
   ::= { acdSmapL2FilterEntry 1 }

acdSmapL2FilterName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is a string to identify the filter."
    ::= { acdSmapL2FilterEntry 2 }

acdSmapL2FilterRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "All columns must have a valid value before a row can be activated. To
        create a new filter you shall provide the a unique filter name for
        an empty row with the RowStatus set to Create and Go. To delete the
        row you need to set the RowStatus to destroy."
    ::= { acdSmapL2FilterEntry 3 }

acdSmapL2FilterVlan1PriorEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN priority check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 4 }

acdSmapL2FilterVlan1Prior OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The first VLAN priority used to compare the incoming traffic.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 5 }

acdSmapL2FilterVlan1PriorLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "First VLAN priority last value, used in range operation.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 6 }

acdSmapL2FilterVlan1PriorOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "First VLAN Priority operator. Valid operator types are:
         Greater than, Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapL2FilterEntry 7 }

acdSmapL2FilterVlan1IdEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN ID check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 8 }

acdSmapL2FilterVlan1Id OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The first VLAN ID used to compare the incoming traffic.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 9 }

acdSmapL2FilterVlan1IdLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "First VLAN ID last value, used in range operation.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 10 }

acdSmapL2FilterVlan1IdOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "First VLAN ID operator. Valid operator types are: Greater than,
         Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapL2FilterEntry 11 }

acdSmapL2FilterVlan1CfiEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN CFI check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 12 }

acdSmapL2FilterVlan1Cfi OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The first VLAN CFI used to compare the incoming traffic.
         Its value is 0 or 1."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 13 }

acdSmapL2FilterVlan1TypeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN Ethertype check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 14 }

acdSmapL2FilterVlan1Type OBJECT-TYPE
    SYNTAX      AcdFilterVlanType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "VLAN Ethernet type."
    DEFVAL      { cvlan }
    ::= { acdSmapL2FilterEntry 15 }

acdSmapL2FilterVlan2PriorEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN priority check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 16 }

acdSmapL2FilterVlan2Prior OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The second VLAN priority used to compare the incoming traffic.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 17 }

acdSmapL2FilterVlan2PriorLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Second VLAN priority last value, used in range operation.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 18 }

acdSmapL2FilterVlan2PriorOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "VLAN Priority operator. Valid operator types are: Greater than,
         Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapL2FilterEntry 19 }

acdSmapL2FilterVlan2IdEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN ID check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 20 }

acdSmapL2FilterVlan2Id OBJECT-TYPE
    SYNTAX      Unsigned32  (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The second VLAN ID used to compare the incoming traffic.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 21 }

acdSmapL2FilterVlan2IdLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Second VLAN ID last value, used in range operation.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 22 }

acdSmapL2FilterVlan2IdOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Second VLAN ID operator. Valid operator types are: Greater than,
         Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapL2FilterEntry 23 }

acdSmapL2FilterVlan2CfiEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN CFI check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 24 }

acdSmapL2FilterVlan2Cfi OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The second VLAN CFI used to compare the incoming traffic.
             Its value is 0 or 1."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 25 }

acdSmapL2FilterVlan2TypeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN Ethertype check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 26 }

acdSmapL2FilterVlan2Type OBJECT-TYPE
    SYNTAX      AcdFilterVlanType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "VLAN Ethernet type."
    DEFVAL      { cvlan }
    ::= { acdSmapL2FilterEntry 27 }

acdSmapL2FilterMacDstEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the destination MAC address check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 28 }

acdSmapL2FilterMacDst OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The destination MAC address used to compare the incoming traffic."
    DEFVAL { '000000000000'H }
    ::= { acdSmapL2FilterEntry 29 }

acdSmapL2FilterMacDstMask OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Number of destination MAC address bits to compare. Its value ranges
         from 0 to 48."
    DEFVAL      { 48 }
    ::= { acdSmapL2FilterEntry 30 }

acdSmapL2FilterMacSrcEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the source MAC address check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 31 }

acdSmapL2FilterMacSrc OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The source MAC address used to compare the incoming traffic."
    DEFVAL { '000000000000'H }
    ::= { acdSmapL2FilterEntry 32 }

acdSmapL2FilterMacSrcMask OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Number of source MAC address bits to compare. Its value ranges
         from 0 to 48."
    DEFVAL      { 48 }
    ::= { acdSmapL2FilterEntry 33 }

acdSmapL2FilterEtypeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the Ethernet type check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 34 }

acdSmapL2FilterEtype OBJECT-TYPE
    SYNTAX      Unsigned32  (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The Ethernet type used to compare the incoming traffic."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 35 }

acdSmapL2FilterIpCosEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the Ethernet type check."
    DEFVAL      { false }
    ::= { acdSmapL2FilterEntry 36 }

acdSmapL2FilterIpCosMode OBJECT-TYPE
    SYNTAX      INTEGER {
                    dscp(1),
                    pre(2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "VLAN ID operator. Valid operator types are: Greater than, Less than,
            Equal to or Range (inclusive range)."
    DEFVAL      { dscp }
    ::= { acdSmapL2FilterEntry 37 }

acdSmapL2FilterDscp OBJECT-TYPE
    SYNTAX      Unsigned32  (0..63)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The DSCP value used to compare the incoming traffic.
             Its value ranges from 0 to 63."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 38 }

acdSmapL2FilterDscpLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..63)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The last DSCP value, used in range operation.
             Its value ranges from 0 to 63."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 39 }

acdSmapL2FilterDscpOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "DSCP operator. Valid operator types are: Greater than,
            Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapL2FilterEntry 40 }

acdSmapL2FilterPre OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The  Precedence value used to compare the incoming traffic.
             Its value ranges from 0 to 3."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 41 }

acdSmapL2FilterPreLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The last Precedence value, used in range operation.
             Its value ranges from 0 to 3."
    DEFVAL      { 0 }
    ::= { acdSmapL2FilterEntry 42 }

acdSmapL2FilterPreOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Precedence operator. Valid operator types are: Greater than,
            Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapL2FilterEntry 43 }

---------------------------------------------------------------------------
 -- The Extended IPv4 table
 -- This table contains all IPv4 Filters.
---------------------------------------------------------------------------

acdSmapIPv4FilterTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSmapIPv4FilterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of all Extended IPv4 filters"
    ::= { acdFilter 4 }

acdSmapIPv4FilterEntry OBJECT-TYPE
    SYNTAX      AcdSmapIPv4FilterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A Filter is a pattern matching a definition against packets."
    INDEX   { acdSmapIPv4FilterID }
    ::=  { acdSmapIPv4FilterTable 1 }

AcdSmapIPv4FilterEntry ::= SEQUENCE {
    acdSmapIPv4FilterID                 Unsigned32,
    acdSmapIPv4FilterName               DisplayString,
    acdSmapIPv4FilterRowStatus          RowStatus,
    acdSmapIPv4FilterVlan1PriorEn       TruthValue,
    acdSmapIPv4FilterVlan1Prior         Unsigned32,
    acdSmapIPv4FilterVlan1PriorLast     Unsigned32,
    acdSmapIPv4FilterVlan1PriorOper     AcdFilterOperator,
    acdSmapIPv4FilterVlan1IdEn          TruthValue,
    acdSmapIPv4FilterVlan1Id            Unsigned32,
    acdSmapIPv4FilterVlan1IdLast        Unsigned32,
    acdSmapIPv4FilterVlan1IdOper        AcdFilterOperator,
    acdSmapIPv4FilterVlan1CfiEn         TruthValue,
    acdSmapIPv4FilterVlan1Cfi           Unsigned32,
    acdSmapIPv4FilterVlan1TypeEn        TruthValue,
    acdSmapIPv4FilterVlan1Type          AcdFilterVlanType,
    acdSmapIPv4FilterVlan2PriorEn       TruthValue,
    acdSmapIPv4FilterVlan2Prior         Unsigned32,
    acdSmapIPv4FilterVlan2PriorLast     Unsigned32,
    acdSmapIPv4FilterVlan2PriorOper     AcdFilterOperator,
    acdSmapIPv4FilterVlan2IdEn          TruthValue,
    acdSmapIPv4FilterVlan2Id            Unsigned32,
    acdSmapIPv4FilterVlan2IdLast        Unsigned32,
    acdSmapIPv4FilterVlan2IdOper        AcdFilterOperator,
    acdSmapIPv4FilterVlan2CfiEn         TruthValue,
    acdSmapIPv4FilterVlan2Cfi           Unsigned32,
    acdSmapIPv4FilterVlan2TypeEn        TruthValue,
    acdSmapIPv4FilterVlan2Type          AcdFilterVlanType,
    acdSmapIPv4FilterSrcEn              TruthValue,
    acdSmapIPv4FilterSrc                IpAddress,
    acdSmapIPv4FilterSrcMask            IpAddress,
    acdSmapIPv4FilterDstEn              TruthValue,
    acdSmapIPv4FilterDst                IpAddress,
    acdSmapIPv4FilterDstMask            IpAddress,
    acdSmapIPv4FilterProtoEn            TruthValue,
    acdSmapIPv4FilterProto              Unsigned32,
    acdSmapIPv4FilterTTLEn              TruthValue,
    acdSmapIPv4FilterTTL                Unsigned32,
    acdSmapIPv4FilterIHLEn              TruthValue,
    acdSmapIPv4FilterIHL                Unsigned32,
    acdSmapIPv4FilterIpCosEn            TruthValue,
    acdSmapIPv4FilterIpCosMode          INTEGER,
    acdSmapIPv4FilterDscp               Unsigned32,
    acdSmapIPv4FilterDscpLast           Unsigned32,
    acdSmapIPv4FilterDscpOper           AcdFilterOperator,
    acdSmapIPv4FilterPre                Unsigned32,
    acdSmapIPv4FilterPreLast            Unsigned32,
    acdSmapIPv4FilterPreOper            AcdFilterOperator,
    acdSmapIPv4FilterECNEn              TruthValue,
    acdSmapIPv4FilterECN                Unsigned32,
    acdSmapIPv4FilterSrcPortEn          TruthValue,
    acdSmapIPv4FilterSrcPort            Unsigned32,
    acdSmapIPv4FilterDstPortEn          TruthValue,
    acdSmapIPv4FilterDstPort            Unsigned32,
    acdSmapIPv4FilterIcmpTypeEn         TruthValue,
    acdSmapIPv4FilterIcmpType           Unsigned32,
    acdSmapIPv4FilterIcmpCodeEn         TruthValue,
    acdSmapIPv4FilterIcmpCode           Unsigned32
}

acdSmapIPv4FilterID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each filter. Its value ranges from 1 to maximum
         value. This maximum  value depend of the type of platform."
   ::= { acdSmapIPv4FilterEntry 1 }

acdSmapIPv4FilterName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is a string to identify the filter."
    ::= { acdSmapIPv4FilterEntry 2 }

acdSmapIPv4FilterRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "All columns must have a valid value before a row can be activated. To
        create a new filter you shall provide the a unique filter name for
        an empty row with the RowStatus set to Create and Go. To delete the
        row you need to set the RowStatus to destroy."
    ::= { acdSmapIPv4FilterEntry 3 }

acdSmapIPv4FilterVlan1PriorEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN priority check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 4 }

acdSmapIPv4FilterVlan1Prior OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The first VLAN priority used to compare the incoming traffic.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 5 }

acdSmapIPv4FilterVlan1PriorLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "First VLAN priority last value, used in range operation.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 6 }

acdSmapIPv4FilterVlan1PriorOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "VLAN Priority operator. Valid operator types are: Greater than,
         Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapIPv4FilterEntry 7 }

acdSmapIPv4FilterVlan1IdEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN ID check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 8 }

acdSmapIPv4FilterVlan1Id OBJECT-TYPE
    SYNTAX      Unsigned32  (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The first VLAN ID used to compare the incoming traffic.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 9 }

acdSmapIPv4FilterVlan1IdLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "First VLAN ID last value, used in range operation.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 10 }

acdSmapIPv4FilterVlan1IdOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "First VLAN ID operator. Valid operator types are: Greater than,
         Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapIPv4FilterEntry 11 }

acdSmapIPv4FilterVlan1CfiEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN CFI check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 12 }

acdSmapIPv4FilterVlan1Cfi OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The first VLAN CFI used to compare the incoming traffic.
         Its value is 0 or 1."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 13 }

acdSmapIPv4FilterVlan1TypeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the first VLAN Ethertype check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 14 }

acdSmapIPv4FilterVlan1Type OBJECT-TYPE
    SYNTAX      AcdFilterVlanType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "VLAN Ethernet type."
    DEFVAL      { cvlan }
    ::= { acdSmapIPv4FilterEntry 15 }

acdSmapIPv4FilterVlan2PriorEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN priority check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 16 }

acdSmapIPv4FilterVlan2Prior OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The second VLAN priority used to compare the incoming traffic.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 17 }

acdSmapIPv4FilterVlan2PriorLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Second VLAN priority last value, used in range operation.
         Its value ranges from 0 to 7."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 18 }

acdSmapIPv4FilterVlan2PriorOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "VLAN Priority operator. Valid operator types are: Greater than,
         Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapIPv4FilterEntry 19 }

acdSmapIPv4FilterVlan2IdEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN ID check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 20 }

acdSmapIPv4FilterVlan2Id OBJECT-TYPE
    SYNTAX      Unsigned32  (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The second VLAN ID used to compare the incoming traffic.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 21 }

acdSmapIPv4FilterVlan2IdLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..4095)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The second VLAN ID used to compare the incoming traffic.
         Its value ranges from 0 to 4095."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 22 }

acdSmapIPv4FilterVlan2IdOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "VLAN ID operator. Valid operator types are: Greater than, Less than,
         Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapIPv4FilterEntry 23 }

acdSmapIPv4FilterVlan2CfiEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN CFI check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 24 }

acdSmapIPv4FilterVlan2Cfi OBJECT-TYPE
    SYNTAX      Unsigned32  (0..1)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The second VLAN CFI used to compare the incoming traffic.
             Its value is 0 or 1."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 25 }

acdSmapIPv4FilterVlan2TypeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the second VLAN Ethertype check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 26 }

acdSmapIPv4FilterVlan2Type OBJECT-TYPE
    SYNTAX      AcdFilterVlanType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "VLAN Ethernet type."
    DEFVAL      { cvlan }
    ::= { acdSmapIPv4FilterEntry 27 }


acdSmapIPv4FilterSrcEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the Source IP address check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 28 }

acdSmapIPv4FilterSrc OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The source IP address used to compare the incoming traffic."
    DEFVAL { '00000000'H }      -- 0.0.0.0
    ::= { acdSmapIPv4FilterEntry 29 }

acdSmapIPv4FilterSrcMask OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The source IP address mask used to compare the incoming traffic."
    DEFVAL { 'FFFFFFFF'H }      -- 255.255.255.255
    ::= { acdSmapIPv4FilterEntry 30 }

acdSmapIPv4FilterDstEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the Destination IP address check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 31 }

acdSmapIPv4FilterDst OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The destination IP address used to compare the incoming traffic."
    DEFVAL { '00000000'H }      -- 0.0.0.0
    ::= { acdSmapIPv4FilterEntry 32 }

acdSmapIPv4FilterDstMask OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The destination IP address mask used to compare the 
            incoming traffic."
    DEFVAL { 'FFFFFFFF'H }      -- 255.255.255.255
    ::= { acdSmapIPv4FilterEntry 33 }

acdSmapIPv4FilterProtoEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the IP protocol check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 34 }

acdSmapIPv4FilterProto OBJECT-TYPE
    SYNTAX      Unsigned32  (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The IP protocol used to compare the incoming traffic.
             Its value ranges from 0 to 255."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 35 }

acdSmapIPv4FilterTTLEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the TTL check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 36 }

acdSmapIPv4FilterTTL OBJECT-TYPE
    SYNTAX      Unsigned32 (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The TTL used to compare the incoming traffic.
             Its value ranges from 0 to 255."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 37 }

acdSmapIPv4FilterIHLEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the IP Header Length check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 38 }

acdSmapIPv4FilterIHL OBJECT-TYPE
    SYNTAX      Unsigned32  (5..15)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The IP Header Length used to compare the incoming traffic.
             Its value ranges from 5 to 15."
    DEFVAL      { 5 }
    ::= { acdSmapIPv4FilterEntry 39 }

acdSmapIPv4FilterIpCosEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the Ethernet type check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 40 }

acdSmapIPv4FilterIpCosMode OBJECT-TYPE
    SYNTAX      INTEGER {
                    dscp(1),
                    pre(2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "VLAN ID operator. Valid operator types are: Greater than, Less than,
            Equal to or Range (inclusive range)."
    DEFVAL      { dscp }
    ::= { acdSmapIPv4FilterEntry 41 }

acdSmapIPv4FilterDscp OBJECT-TYPE
    SYNTAX      Unsigned32  (0..63)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The DSCP value used to compare the incoming traffic.
             Its value ranges from 0 to 63."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 42 }

acdSmapIPv4FilterDscpLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..63)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The DSCP value used to compare the incoming traffic.
             Its value ranges from 0 to 63."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 43 }

acdSmapIPv4FilterDscpOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "DSCP operator. Valid operator types are: Greater than,
            Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapIPv4FilterEntry 44 }

acdSmapIPv4FilterPre OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The  Precedence value used to compare the incoming traffic.
             Its value ranges from 0 to 3."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 45 }

acdSmapIPv4FilterPreLast OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The Precedence value used to compare the incoming traffic.
             Its value ranges from 0 to 3."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 46 }

acdSmapIPv4FilterPreOper OBJECT-TYPE
    SYNTAX      AcdFilterOperator
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Precedence operator. Valid operator types are: Greater than,
            Less than, Equal to or Range (inclusive range)."
    DEFVAL      { equalTo }
    ::= { acdSmapIPv4FilterEntry 47 }

acdSmapIPv4FilterECNEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the ECN (Explicite Cogestion Notification) check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 48 }

acdSmapIPv4FilterECN OBJECT-TYPE
    SYNTAX      Unsigned32  (0..3)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The ECN value used to compare the incoming traffic.
             Its value ranges from 0 to 3."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 49 }

acdSmapIPv4FilterSrcPortEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the UDP/TCP Source port check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 50 }

acdSmapIPv4FilterSrcPort OBJECT-TYPE
    SYNTAX      Unsigned32  (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The UDP/TCP Source Port used to compare the incoming traffic.
             Its value ranges from 0 to 65535."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 51 }

acdSmapIPv4FilterDstPortEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the UDP/TCP Destination port check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 52 }

acdSmapIPv4FilterDstPort OBJECT-TYPE
    SYNTAX      Unsigned32  (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The UDP/TCP Destination Port used to compare the incoming traffic.
             Its value ranges from 0 to 65535."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 53 }

acdSmapIPv4FilterIcmpTypeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the ICMP type check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 54 }

acdSmapIPv4FilterIcmpType OBJECT-TYPE
    SYNTAX      Unsigned32  (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The ICMP type used to compare the incoming traffic.
             Its value ranges from 0 to 255."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 55 }

acdSmapIPv4FilterIcmpCodeEn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable the ICMP code check."
    DEFVAL      { false }
    ::= { acdSmapIPv4FilterEntry 56 }

acdSmapIPv4FilterIcmpCode OBJECT-TYPE
    SYNTAX      Unsigned32  (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The ICMP code used to compare the incoming traffic.
             Its value ranges from 0 to 255."
    DEFVAL      { 0 }
    ::= { acdSmapIPv4FilterEntry 57 }

---------------------------------------------------------------------------
 -- Filter Transaction ID Information
---------------------------------------------------------------------------

acdSmapL2FilterTableLastChangeTid OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This is the transaction ID of the last change of the acdSmapL2FilterTable
        table.  If this value is different since the last read this is indicate 
        a table change."
    ::= { acdFilterTableTid 1 }

acdSmapIPv4FilterTableLastChangeTid OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This is the transaction ID of the last change of the acdSmapIPv4FilterTable
        table.  If this value is different since the last read this is indicate 
        a table change."
    ::= { acdFilterTableTid 2 }

---------------------------------------------------------------------------
 -- ACD-FILTER-MIB Module - Conformance Information
---------------------------------------------------------------------------

acdFilterCompliances  OBJECT IDENTIFIER ::= { acdFilterConformance 1 }
acdFilterGroups       OBJECT IDENTIFIER ::= { acdFilterConformance 2 }

---------------------------------------------------------------------------
 -- Units of conformance
---------------------------------------------------------------------------

acdL2FilterGroup OBJECT-GROUP
    OBJECTS {
        acdL2FilterName,
        acdL2FilterMacDstEn,
        acdL2FilterMacDst,
        acdL2FilterMacDstMask,
        acdL2FilterMacSrcEn,
        acdL2FilterMacSrc,
        acdL2FilterMacSrcMask,
        acdL2FilterEtypeEn,
        acdL2FilterEtype,
        acdL2FilterVlan1PriorEn,
        acdL2FilterVlan1Prior,
        acdL2FilterVlan1CfiEn,
        acdL2FilterVlan1Cfi,
        acdL2FilterVlan1IdEn,
        acdL2FilterVlan1Id,
        acdL2FilterVlan2PriorEn,
        acdL2FilterVlan2Prior,
        acdL2FilterVlan2CfiEn,
        acdL2FilterVlan2Cfi,
        acdL2FilterVlan2IdEn,
        acdL2FilterVlan2Id,
        acdL2FilterRowStatus
    }
    STATUS      current
    DESCRIPTION
       "Objects for the L2 filter configuration Group."
    ::= { acdFilterGroups 1 }


acdIPv4FilterGroup OBJECT-GROUP
    OBJECTS {
        acdIPv4FilterName,
        acdIPv4FilterSrcEn,
        acdIPv4FilterSrc,
        acdIPv4FilterSrcMask,
        acdIPv4FilterDstEn,
        acdIPv4FilterDst,
        acdIPv4FilterDstMask,
        acdIPv4FilterProtoEn,
        acdIPv4FilterProto,
        acdIPv4FilterTTLEn,
        acdIPv4FilterTTL,
        acdIPv4FilterIHLEn,
        acdIPv4FilterIHL,
        acdIPv4FilterDscpEn,
        acdIPv4FilterDscp,
        acdIPv4FilterECNEn,
        acdIPv4FilterECN,
        acdIPv4FilterSrcPortEn,
        acdIPv4FilterSrcPort,
        acdIPv4FilterDstPortEn,
        acdIPv4FilterDstPort,
        acdIPv4FilterIcmpTypeEn,
        acdIPv4FilterIcmpType,
        acdIPv4FilterIcmpCodeEn,
        acdIPv4FilterIcmpCode,
        acdIPv4FilterRowStatus
    }
    STATUS      current
    DESCRIPTION
       "Objects for the IPv4 filter configuration Group."
    ::= { acdFilterGroups 2 }

acdSmapL2FilterGroup OBJECT-GROUP
    OBJECTS {
        acdSmapL2FilterName,
        acdSmapL2FilterRowStatus,
        acdSmapL2FilterVlan1PriorEn,
        acdSmapL2FilterVlan1Prior,
        acdSmapL2FilterVlan1PriorLast,
        acdSmapL2FilterVlan1PriorOper,
        acdSmapL2FilterVlan1IdEn,
        acdSmapL2FilterVlan1Id,
        acdSmapL2FilterVlan1IdLast,
        acdSmapL2FilterVlan1IdOper,
        acdSmapL2FilterVlan1CfiEn,
        acdSmapL2FilterVlan1Cfi,
        acdSmapL2FilterVlan1TypeEn,
        acdSmapL2FilterVlan1Type,
        acdSmapL2FilterVlan2PriorEn,
        acdSmapL2FilterVlan2Prior,
        acdSmapL2FilterVlan2PriorLast,
        acdSmapL2FilterVlan2PriorOper,
        acdSmapL2FilterVlan2IdEn,
        acdSmapL2FilterVlan2Id,
        acdSmapL2FilterVlan2IdLast,
        acdSmapL2FilterVlan2IdOper,
        acdSmapL2FilterVlan2CfiEn,
        acdSmapL2FilterVlan2Cfi,
        acdSmapL2FilterVlan2TypeEn,
        acdSmapL2FilterVlan2Type,
        acdSmapL2FilterMacDstEn,
        acdSmapL2FilterMacDst,
        acdSmapL2FilterMacDstMask,
        acdSmapL2FilterMacSrcEn,
        acdSmapL2FilterMacSrc,
        acdSmapL2FilterMacSrcMask,
        acdSmapL2FilterEtypeEn,
        acdSmapL2FilterEtype,
        acdSmapL2FilterIpCosEn,
        acdSmapL2FilterIpCosMode,
        acdSmapL2FilterDscp,
        acdSmapL2FilterDscpLast,
        acdSmapL2FilterDscpOper,
        acdSmapL2FilterPre,
        acdSmapL2FilterPreLast,
        acdSmapL2FilterPreOper
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SMAP L2 filter configuration Group."
    ::= { acdFilterGroups 3 }

acdSmapIPv4FilterGroup OBJECT-GROUP
    OBJECTS {
        acdSmapIPv4FilterName,
        acdSmapIPv4FilterRowStatus,
        acdSmapIPv4FilterVlan1PriorEn,
        acdSmapIPv4FilterVlan1Prior,
        acdSmapIPv4FilterVlan1PriorLast,
        acdSmapIPv4FilterVlan1PriorOper,
        acdSmapIPv4FilterVlan1IdEn,
        acdSmapIPv4FilterVlan1Id,
        acdSmapIPv4FilterVlan1IdLast,
        acdSmapIPv4FilterVlan1IdOper,
        acdSmapIPv4FilterVlan1CfiEn,
        acdSmapIPv4FilterVlan1Cfi,
        acdSmapIPv4FilterVlan1TypeEn,
        acdSmapIPv4FilterVlan1Type,
        acdSmapIPv4FilterVlan2PriorEn,
        acdSmapIPv4FilterVlan2Prior,
        acdSmapIPv4FilterVlan2PriorLast,
        acdSmapIPv4FilterVlan2PriorOper,
        acdSmapIPv4FilterVlan2IdEn,
        acdSmapIPv4FilterVlan2Id,
        acdSmapIPv4FilterVlan2IdLast,
        acdSmapIPv4FilterVlan2IdOper,
        acdSmapIPv4FilterVlan2CfiEn,
        acdSmapIPv4FilterVlan2Cfi,
        acdSmapIPv4FilterVlan2TypeEn,
        acdSmapIPv4FilterVlan2Type,
        acdSmapIPv4FilterSrcEn,
        acdSmapIPv4FilterSrc,
        acdSmapIPv4FilterSrcMask,
        acdSmapIPv4FilterDstEn,
        acdSmapIPv4FilterDst,
        acdSmapIPv4FilterDstMask,
        acdSmapIPv4FilterProtoEn,
        acdSmapIPv4FilterProto,
        acdSmapIPv4FilterTTLEn,
        acdSmapIPv4FilterTTL,
        acdSmapIPv4FilterIHLEn,
        acdSmapIPv4FilterIHL,
        acdSmapIPv4FilterIpCosEn,
        acdSmapIPv4FilterIpCosMode,
        acdSmapIPv4FilterDscp,
        acdSmapIPv4FilterDscpLast,
        acdSmapIPv4FilterDscpOper,
        acdSmapIPv4FilterPre,
        acdSmapIPv4FilterPreLast,
        acdSmapIPv4FilterPreOper,
        acdSmapIPv4FilterECNEn,
        acdSmapIPv4FilterECN,
        acdSmapIPv4FilterSrcPortEn,
        acdSmapIPv4FilterSrcPort,
        acdSmapIPv4FilterDstPortEn,
        acdSmapIPv4FilterDstPort,
        acdSmapIPv4FilterIcmpTypeEn,
        acdSmapIPv4FilterIcmpType,
        acdSmapIPv4FilterIcmpCodeEn,
        acdSmapIPv4FilterIcmpCode
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SMAP IPv4 filter configuration Group."
    ::= { acdFilterGroups 4 }

acdFilterTidGroup OBJECT-GROUP
    OBJECTS {
        acdSmapL2FilterTableLastChangeTid,
        acdSmapIPv4FilterTableLastChangeTid
    }
    STATUS      current
    DESCRIPTION
       "List of scalars to monitior changes in tables."
    ::= { acdFilterGroups 5 }

acdFilterCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
       "The compliance statement for support of the ACD-FILTER-MIB module."
    MODULE
        MANDATORY-GROUPS {
            acdL2FilterGroup,
            acdIPv4FilterGroup,
            acdSmapL2FilterGroup,
            acdSmapIPv4FilterGroup,
            acdFilterTidGroup
         }

    OBJECT  acdL2FilterRowStatus
      SYNTAX       RowStatus { active(1) }
      WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
      DESCRIPTION "Support for createAndWait is not required."

    OBJECT  acdIPv4FilterRowStatus
      SYNTAX       RowStatus { active(1) }
      WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
      DESCRIPTION "Support for createAndWait is not required."

    OBJECT  acdSmapL2FilterRowStatus
      SYNTAX       RowStatus { active(1) }
      WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
      DESCRIPTION "Support for createAndWait is not required."

    OBJECT  acdSmapIPv4FilterRowStatus
      SYNTAX       RowStatus { active(1) }
      WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
      DESCRIPTION "Support for createAndWait is not required."

    ::= { acdFilterCompliances 1 }

END