path: root/MIBS/MPLS-VPN-MIB

-- *****************************************************************
-- MPLS-VPN-MIB.my:  MPLS Virtual Private Networks MIB
--
-- Oct 2001, Michael T Piecuch
--
-- Copyright (c) 2001 by cisco Systems, Inc.
-- All rights reserved.
-- 
-- *****************************************************************
--
-- This MIB is based of version 03 the IETF draft 
-- draft-ietf-ppvpn-mpls-vpn-mib-03.txt
--
-- (mpiecuch, 04/30/2002)
-- This IETF draft version does not compile cleanly with SMIC.  The
-- latest draft fixes the compiler issues, but the MIB described in this
-- file represents the old version and has been modified so that it will 
-- compile.
--
-- The following changes were made:
-- o mplsVpnVrfName (an INDEX object) was set to MAX-ACCESS
--   'not-accessible'
-- o mplsVpnInterfaceConfIndex (an INDEX object) was set to MAX-ACCESS
--   'not-accessible'
-- o INDEX objects (mplsVpnVrfName and mplsVpnInterfaceConfIndex)
--   were removed from the notifications.
-- o INDEX objects in mplsVpnVrfBgpNbrPrefixEntry modified
-- o Removed unused IMPORT objects
-- o Added dummy BITS value for mplsVpnInterfaceVpnRouteDistProtocol
--   so that it would start at position 0

MPLS-VPN-MIB DEFINITIONS ::= BEGIN

IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
   experimental, Integer32, Counter32, Unsigned32
--   TimeTicks
-- Removed so that MIB would complile (mpiecuch, 04/20/2002)
      FROM SNMPv2-SMI


   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
      FROM SNMPv2-CONF

   TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
   TimeStamp, DisplayString
      FROM SNMPv2-TC

   InterfaceIndex
      FROM IF-MIB

   SnmpAdminString
      FROM SNMP-FRAMEWORK-MIB

   InetAddress, InetAddressType
      FROM INET-ADDRESS-MIB;

--   bgp4PathAttrIpAddrPrefix, bgp4PathAttrIpAddrPrefixLen, 
--   bgp4PathAttrPeer
--      FROM BGP4-MIB;
--
--   Commented out so MIB would compile (mpiecuch, 04/30/2002)

mplsVpnMIB MODULE-IDENTITY
   LAST-UPDATED "200110151200Z"  -- 15 October 2001 12:00:00 GMT
   ORGANIZATION "Provider Provisioned Virtual Private
                 Networks Working Group."
   CONTACT-INFO
          "        Thomas D. Nadeau
                   tnadeau@cisco.com

                   Luyuan Fang
                   luyuanfang@att.com

                   Stephen Brannon

                   Fabio M. Chiussi
                   fabio@bell-labs.com

                   Joseph Dube
                   jdube@avici.com

                   Martin Tatham
                   martin.tatham@bt.com

                   Harmen van der Linde
                   hvdl@att.com

                   Comments and discussion to ppvpn@ietf.org"

   DESCRIPTION
        "This MIB contains managed object definitions for the
         Multiprotocol Label Switching (MPLS)/Border Gateway


         Protocol (BGP) Virtual Private Networks (VPNs) as
         defined in : Rosen, E., Viswanathan, A., and R.
         Callon, Multiprotocol Label Switching Architecture,
         RFC3031, January 2001."

  -- Revision history.
   REVISION "200110151200Z"  -- 15 October 2001 12:00:00 GMT
   DESCRIPTION
        "Fixed compilation errors from last version. 

         Changed mplsVpnInterfaceVpnRouteDistProtocol to be a BITS
         structure to allow more than one to be selected.

         Changed mplsIfDown -> mplsVrfIfDown
         Changed mplsIfUp -> mplsVrfIfUp
         "
   REVISION 
        "200110051200Z"  -- 05 October 2001 12:00:00 GMT
   DESCRIPTION
        "Added integer index and removed route distinguisher index 
         from mplsVpnVrfRouteTargetTable.

         Removed mplsVpn ifType; simply use mpls(166) ifType for
         MPLS VPN-enabled interfaces instead.

         Removed interface and protocol-related objects from
         mplsVpnVrfTable.

         Moved mplsVpnVrfConfMaxPossibleRoutes from 
         mplsVpnVrfTable to scalar object.

         Removed mplsVpnActiveVrfInterfaces scalar object.
         Removed mplsVpnVrfUpTime object from mplsVpnVrfTable.

         Added MplsVpnVrfBgpNbrPrefixTable providing a linkage with
         the bgp4PathAttrTable of the BGPv4 MIB."

   REVISION 
        "200107171200Z"  -- 17 July 2001 12:00:00 GMT
   DESCRIPTION
        "Removed mplsVpnVrfRouteTargetImport/Export from route target
         table, and modified indexing to better reflect N <> R
         distribution policy. Also added new object called
         mplsVpnVrfRouteTargetType which denotes import/export
         policy for the specified route target. 

         Added mplsVpnInterfaceConfRowStatus which allows for
         an interface to be associated with a VPN through SNMP
         configuration.


         Added VrfName to index of VrfInterfaceConfEntry which allows
         interfaces to be associated with the appropriate VRF.

         Modified description of mplsVpnVrfConfMaxPossibleRoutes and
         mplsVpnVrfConfMaxRoutes to allow for undetermined value.

         Removed 'both' enumerated value in mplsVpnVrfBgpNbrRole.

         Updated example to reflect these changes."

   REVISION
         "200107101200Z"  -- 10 July 2001 12:00:00 GMT
   DESCRIPTION
        "Renamed mplsNumVrfSecViolationThreshExceeded to 
         mplsNumVrfSecIllegalLabelThreshExceeded, and removed
         mplsVpnInterfaceConfIndex from varbind.

         Changed MplsVpnId TC from SnmpAdminString to OCTET STRING.

         Added mplsVpnVrfSecIllegalLabelRcvThresh to 
         mplsVpnVrfSecEntry.

         Changed duplicate mplsVpnVrfRouteTargetImport in 
         mplsVpnVrfRouteTargetEntry INDEX to 
         mplsVpnVrfRouteTargetExport."

  REVISION
        "200106191200Z"  -- 19 June 2001 12:00:00 GMT
   DESCRIPTION
        "Fixed several compile errors."

  REVISION
       "200105301200Z"  -- 30 May 2001 12:00:00 EST
   DESCRIPTION
        "Updated most of document and MIB to reflect comments from WG."

  REVISION
       "200009301200Z"  -- 30 September 2000 12:00:00 EST
   DESCRIPTION
      "Initial draft version."
   ::= { experimental 118 } 

-- Textual Conventions.

MplsVpnId ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION
       "An identifier that is assigned to each MPLS/BGP VPN and
        is used to uniquely identify it. This is assigned by the
        system operator or NMS and SHOULD be unique throughout


        the MPLS domain. If this is the case, then this identifier
        can then be used at any LSR within a specific MPLS domain
        to identify this MPLS/BGP VPN. It may also be possible to
        preserve the uniqueness of this identifier across MPLS
        domain boundaries, in which case this identifier can then
        be used to uniquely identify MPLS/BGP VPNs on a more global
        basis."
   REFERENCE
        "RFC 2685 [VPN-RFC2685] Fox B., et al, 'Virtual Private
         Networks Identifier', September 1999."
   SYNTAX OCTET STRING(SIZE (0..31))

MplsVpnRouteDistinguisher ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION
       "Syntax for a route distinguisher and route target."
   SYNTAX  OCTET STRING(SIZE (0..256))

-- Top level components of this MIB.
mplsVpnNotifications OBJECT IDENTIFIER ::= { mplsVpnMIB 0 }
mplsVpnObjects       OBJECT IDENTIFIER ::= { mplsVpnMIB 1 }
mplsVpnScalars       OBJECT IDENTIFIER ::= { mplsVpnObjects 1 }
mplsVpnConf          OBJECT IDENTIFIER ::= { mplsVpnObjects 2 }
mplsVpnPerf          OBJECT IDENTIFIER ::= { mplsVpnObjects 3 }
mplsVpnRoute         OBJECT IDENTIFIER ::= { mplsVpnObjects 4 }
mplsVpnConformance   OBJECT IDENTIFIER ::= { mplsVpnMIB 3 }

--
-- Scalar Objects
--
mplsVpnConfiguredVrfs OBJECT-TYPE
   SYNTAX        Unsigned32

   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The number of VRFs which are configured on this node."
   ::= { mplsVpnScalars 1 }

mplsVpnActiveVrfs OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The number of VRFs which are active on this node.
        That is, those VRFs whose corresponding mplsVpnVrfOperStatus 
        object value is equal to operational (1)."
   ::= { mplsVpnScalars 2 }


mplsVpnConnectedInterfaces OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Total number of interfaces connected to a VRF."
   ::= { mplsVpnScalars 3 }

mplsVpnNotificationEnable OBJECT-TYPE
   SYNTAX        TruthValue
   MAX-ACCESS    read-write
   STATUS        current
   DESCRIPTION
        "If this object is true, then it enables the
         generation of all notifications defined in 
         this MIB."
   DEFVAL { false }
   ::= { mplsVpnScalars 4 }

mplsVpnVrfConfMaxPossibleRoutes  OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
     "Denotes maximum number of routes which the device
      will allow all VRFs jointly to hold. If this value is
      set to 0, this indicates that the device is 
      unable to determine the absolute maximum. In this
      case, the configured maximum MAY not actually
      be allowed by the device."
   ::= { mplsVpnScalars 5 }

-- VPN Interface Configuration Table

mplsVpnInterfaceConfTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsVpnInterfaceConfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per-interface MPLS capability
        and associated information."
   ::= { mplsVpnConf 1 }

mplsVpnInterfaceConfEntry OBJECT-TYPE
   SYNTAX        MplsVpnInterfaceConfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table is created by an LSR for
        every interface capable of supporting MPLS/BGP VPN.


        Each entry in this table is meant to correspond to
        an entry in the Interfaces Table."
   INDEX       { mplsVpnVrfName, mplsVpnInterfaceConfIndex }
   ::= { mplsVpnInterfaceConfTable 1 }

MplsVpnInterfaceConfEntry ::= SEQUENCE {
  mplsVpnInterfaceConfIndex             InterfaceIndex,
  mplsVpnInterfaceLabelEdgeType         INTEGER,
  mplsVpnInterfaceVpnClassification     INTEGER,
  mplsVpnInterfaceVpnRouteDistProtocol  BITS,
  mplsVpnInterfaceConfStorageType       StorageType,
  mplsVpnInterfaceConfRowStatus         RowStatus
}

mplsVpnInterfaceConfIndex OBJECT-TYPE
   SYNTAX        InterfaceIndex
   MAX-ACCESS    not-accessible
--
-- MAX-ACCESS    accessible-for-notify
--     
-- The MAX-ACCESS for an auxiliary (INDEX) object must be
-- 'not-accessible'.  This was changed from the IETF draft
-- version so that this MIB would compile. (mpiecuch, 04/30/2002)
-- 
   STATUS        current
   DESCRIPTION
       "This is a unique index for an entry in the
        MplsVPNInterfaceConfTable. A non-zero index for an
        entry indicates the ifIndex for the corresponding
        interface entry in the MPLS-VPN-layer in the ifTable.
        Note that this table does not necessarily correspond
        one-to-one with all entries in the Interface MIB
        having an ifType of MPLS-layer; rather, only those
        which are enabled for MPLS/BGP VPN functionality."
   REFERENCE
       "RFC 2233 - The Interfaces Group MIB using SMIv2,
        McCloghrie, K., and F. Kastenholtz, Nov. 1997"
   ::= { mplsVpnInterfaceConfEntry 1 }

mplsVpnInterfaceLabelEdgeType OBJECT-TYPE
   SYNTAX  INTEGER { providerEdge (1),
                     customerEdge (2)
                   }
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Either the providerEdge(0) (PE) or customerEdge(1)
       (CE) bit MUST be set."
   ::= { mplsVpnInterfaceConfEntry 2 }

mplsVpnInterfaceVpnClassification OBJECT-TYPE
   SYNTAX        INTEGER { carrierOfCarrier (1),
                           enterprise (2),
                           interProvider (3)
   }
   MAX-ACCESS    read-create
   STATUS        current


   DESCRIPTION
       "Denotes whether this link participates in a
        carrier-of-carrier's, enterprise, or inter-provider
        scenario."
   ::= { mplsVpnInterfaceConfEntry 3 }

mplsVpnInterfaceVpnRouteDistProtocol OBJECT-TYPE
   SYNTAX        BITS { dummy(0), -- So that MIB will 
--                                   compile (mpiecuch, 04/30/2002)
			none (1),
                        bgp (2),
                        ospf (3),
                        rip(4),
                        isis(5),
                        other (6)
   }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Denotes the route distribution protocol across the
        PE-CE link. Note that more than one routing protocol
        may be enabled at the same time."
   ::= { mplsVpnInterfaceConfEntry 4 }

mplsVpnInterfaceConfStorageType  OBJECT-TYPE
   SYNTAX      StorageType
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The storage type for this entry."
   ::= { mplsVpnInterfaceConfEntry 5 }

mplsVpnInterfaceConfRowStatus  OBJECT-TYPE
   SYNTAX      RowStatus
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The row status for this entry. This value is
        used to create a row in this table, signifying
        that the specified interface is to be associated
        with the specified interface. If this operation
        succeeds, the interface will have been associated,
        otherwise the agent would not allow the association. 
        If the agent only allows read-only operations on
        this table, it will create entries in this table
        as they are created."
   ::= { mplsVpnInterfaceConfEntry 6 }

-- VRF Configuration Table

mplsVpnVrfTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsVpnVrfEntry


   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per-interface MPLS/BGP VPN
        VRF Table capability and associated information.
        Entries in this table define VRF routing instances
        associated with MPLS/VPN interfaces. Note that
        multiple interfaces can belong to the same VRF
        instance. The collection of all VRF instances
        comprises an actual VPN."
   ::= { mplsVpnConf 2 }

mplsVpnVrfEntry OBJECT-TYPE
   SYNTAX        MplsVpnVrfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table is created by an LSR for
        every VRF capable of supporting MPLS/BGP VPN. The
        indexing provides an ordering of VRFs per-VPN
        interface."
   INDEX       { mplsVpnVrfName }
   ::= { mplsVpnVrfTable 1 }

MplsVpnVrfEntry ::= SEQUENCE {
  mplsVpnVrfName                      MplsVpnId,
  mplsVpnVrfDescription               SnmpAdminString,
  mplsVpnVrfRouteDistinguisher        MplsVpnRouteDistinguisher,
  mplsVpnVrfCreationTime              TimeStamp,
  mplsVpnVrfOperStatus                INTEGER,
  mplsVpnVrfActiveInterfaces          Unsigned32,
  mplsVpnVrfAssociatedInterfaces      Unsigned32,
  mplsVpnVrfConfMidRouteThreshold     Unsigned32,
  mplsVpnVrfConfHighRouteThreshold    Unsigned32,
  mplsVpnVrfConfMaxRoutes             Unsigned32,
  mplsVpnVrfConfLastChanged           TimeStamp,
  mplsVpnVrfConfRowStatus             RowStatus,
  mplsVpnVrfConfStorageType           StorageType
}

mplsVpnVrfName OBJECT-TYPE
   SYNTAX        MplsVpnId
   MAX-ACCESS    not-accessible
--
-- MAX-ACCESS    accessible-for-notify
--     
-- The MAX-ACCESS for an auxiliary (INDEX) object must be
-- 'not-accessible'.  This was changed from the IETF draft
-- version so that this MIB would compile. (mpiecuch, 04/30/2002)
-- 
   STATUS        current
   DESCRIPTION
       "The human-readable name of this VPN. This MAY
        be equivalent to the RFC2685 VPN-ID."

   REFERENCE
       "RFC 2685 [VPN-RFC2685] Fox B., et al, `Virtual


        Private Networks Identifier`, September 1999."
   ::= { mplsVpnVrfEntry 1 }

mplsVpnVrfDescription OBJECT-TYPE
   SYNTAX        SnmpAdminString
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The human-readable description of this VRF."
   ::= { mplsVpnVrfEntry 2 }

mplsVpnVrfRouteDistinguisher OBJECT-TYPE
   SYNTAX        MplsVpnRouteDistinguisher
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The route distinguisher for this VRF."
   ::= { mplsVpnVrfEntry 3 }

mplsVpnVrfCreationTime OBJECT-TYPE
   SYNTAX        TimeStamp
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "The time at which this VRF entry was created."
   ::= { mplsVpnVrfEntry 4 }

mplsVpnVrfOperStatus OBJECT-TYPE
   SYNTAX        INTEGER { up (1),
                           down (2)
                         }
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Denotes whether a VRF is operational or not. A VRF is 
        up(1) when at least one interface associated with the
        VRF, which ifOperStatus is up(1). A VRF is down(2) when:

        a. There does not exist at least one interface whose
           ifOperStatus is up(1).

        b. There are no interfaces associated with the VRF."
   ::= { mplsVpnVrfEntry 5 }

mplsVpnVrfActiveInterfaces OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Total number of interfaces connected to this VRF with 


        ifOperStatus = up(1). 

        This counter should be incremented when:

        a. When the ifOperStatus of one of the connected interfaces 
           changes from down(2) to up(1).

        b. When an interface with ifOperStatus = up(1) is connected
           to this VRF.

        This counter should be decremented when:

        a. When the ifOperStatus of one of the connected interfaces 
           changes from up(1) to down(2).

        b. When one of the connected interfaces with 
           ifOperStatus = up(1) gets disconnected from this VRF."
   ::= { mplsVpnVrfEntry 6 }

mplsVpnVrfAssociatedInterfaces OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Total number of interfaces connected to this VRF 
        (independent of ifOperStatus type)."
   ::= { mplsVpnVrfEntry 7 }

mplsVpnVrfConfMidRouteThreshold     OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "Denotes mid-level water marker for the number
      of routes which  this VRF may hold."
  ::= { mplsVpnVrfEntry 8 }

mplsVpnVrfConfHighRouteThreshold  OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
     "Denotes high-level water marker for the number of
      routes which  this VRF may hold."
  ::= { mplsVpnVrfEntry 9 }

mplsVpnVrfConfMaxRoutes  OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-create
   STATUS        current


   DESCRIPTION
     "Denotes maximum number of routes which this VRF is
      configured to hold. This value MUST be less than or
      equal to mplsVrfMaxPossibleRoutes unless it is set
      to 0."
  ::= { mplsVpnVrfEntry 10 }

mplsVpnVrfConfLastChanged  OBJECT-TYPE
   SYNTAX        TimeStamp
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
     "The value of sysUpTime at the time of the last
      change of this table entry, which includes changes of
      VRF parameters defined in this table or addition or
      deletion of interfaces associated with this VRF."
  ::= { mplsVpnVrfEntry 11 }

mplsVpnVrfConfRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This variable is used to create, modify, and/or
        delete a row in this table."
  ::= { mplsVpnVrfEntry 12 }

mplsVpnVrfConfStorageType  OBJECT-TYPE
   SYNTAX      StorageType
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The storage type for this entry."
   ::= { mplsVpnVrfEntry 13 }

-- MplsVpnRouteTargetTable

mplsVpnVrfRouteTargetTable OBJECT-TYPE
      SYNTAX        SEQUENCE OF MplsVpnVrfRouteTargetEntry
      MAX-ACCESS    not-accessible
      STATUS        current
      DESCRIPTION
          "This table specifies per-VRF route target association.
           Each entry identifies a connectivity policy supported
           as part of a VPN."
   ::= { mplsVpnConf 3 }

mplsVpnVrfRouteTargetEntry OBJECT-TYPE
      SYNTAX        MplsVpnVrfRouteTargetEntry
      MAX-ACCESS    not-accessible


      STATUS        current
      DESCRIPTION
          " An entry in this table is created by an LSR for
           each route target configured for a VRF supporting
           a MPLS/BGP VPN instance. The indexing provides an
           ordering per-VRF instance."
      INDEX  { mplsVpnVrfName, mplsVpnVrfRouteTargetIndex, 
               mplsVpnVrfRouteTargetType }
   ::= { mplsVpnVrfRouteTargetTable 1 }

MplsVpnVrfRouteTargetEntry ::= SEQUENCE {
     mplsVpnVrfRouteTargetIndex      Unsigned32,  
     mplsVpnVrfRouteTargetType       INTEGER,
     mplsVpnVrfRouteTarget           MplsVpnRouteDistinguisher,
     mplsVpnVrfRouteTargetDescr      DisplayString,
     mplsVpnVrfRouteTargetRowStatus  RowStatus
   }

mplsVpnVrfRouteTargetIndex OBJECT-TYPE
      SYNTAX        Unsigned32
      MAX-ACCESS    not-accessible
      STATUS        current
      DESCRIPTION
          "Auxiliary index for route-targets configured for a 
           particular VRF."
   ::= { mplsVpnVrfRouteTargetEntry 2 }

mplsVpnVrfRouteTargetType OBJECT-TYPE
   SYNTAX        INTEGER { import(1), export(2), both(3) }
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "The route target export distribution type."
   ::= { mplsVpnVrfRouteTargetEntry 3 }

mplsVpnVrfRouteTarget OBJECT-TYPE
   SYNTAX        MplsVpnRouteDistinguisher
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The route target distribution policy."
   ::= { mplsVpnVrfRouteTargetEntry 4 }

mplsVpnVrfRouteTargetDescr OBJECT-TYPE
   SYNTAX        DisplayString
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Description of the route target."
   ::= { mplsVpnVrfRouteTargetEntry 5 }


mplsVpnVrfRouteTargetRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Row status for this entry."
   ::= { mplsVpnVrfRouteTargetEntry 6 }

-- MplsVpnVrfBgpNbrAddrTable

mplsVpnVrfBgpNbrAddrTable OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsVpnVrfBgpNbrAddrEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "Each entry in this table specifies a per-interface 
        MPLS/EBGP neighbor."
   ::= { mplsVpnConf 4 }

mplsVpnVrfBgpNbrAddrEntry OBJECT-TYPE
     SYNTAX        MplsVpnVrfBgpNbrAddrEntry
     MAX-ACCESS    not-accessible
     STATUS        current
     DESCRIPTION
         "An entry in this table is created by an LSR for
          every VRF capable of supporting MPLS/BGP VPN. The
          indexing provides an ordering of VRFs per-VPN
          interface."
    INDEX  { mplsVpnVrfName, mplsVpnInterfaceConfIndex,
             mplsVpnVrfBgpNbrIndex }
   ::= { mplsVpnVrfBgpNbrAddrTable 1 }

MplsVpnVrfBgpNbrAddrEntry ::= SEQUENCE {
     mplsVpnVrfBgpNbrIndex        Unsigned32,
     mplsVpnVrfBgpNbrRole         INTEGER,
     mplsVpnVrfBgpNbrType         InetAddressType,
     mplsVpnVrfBgpNbrAddr         InetAddress,
     mplsVpnVrfBgpNbrRowStatus    RowStatus,
     mplsVpnVrfBgpNbrStorageType  StorageType
   }

mplsVpnVrfBgpNbrIndex OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
         "This is a unique tertiary index for an entry in the
          MplsVpnVrfBgpNbrAddrEntry Table."
    ::= { mplsVpnVrfBgpNbrAddrEntry 1 }


mplsVpnVrfBgpNbrRole  OBJECT-TYPE
   SYNTAX        INTEGER { ce(1), pe(2) }
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Denotes the role played by this EBGP neighbor
        with respect to this VRF."
   ::= { mplsVpnVrfBgpNbrAddrEntry 2 }

mplsVpnVrfBgpNbrType  OBJECT-TYPE
   SYNTAX        InetAddressType
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Denotes the address family of the PE address."
   ::= { mplsVpnVrfBgpNbrAddrEntry 3 }

mplsVpnVrfBgpNbrAddr  OBJECT-TYPE
   SYNTAX        InetAddress
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "Denotes the EBGP neighbor address."
   ::= { mplsVpnVrfBgpNbrAddrEntry 4 }

mplsVpnVrfBgpNbrRowStatus OBJECT-TYPE
   SYNTAX        RowStatus
   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "This variable is used to create, modify, and/or
        delete a row in this table."
   ::= { mplsVpnVrfBgpNbrAddrEntry 5 }

mplsVpnVrfBgpNbrStorageType OBJECT-TYPE
   SYNTAX      StorageType
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
       "The storage type for this entry."
   ::= { mplsVpnVrfBgpNbrAddrEntry 6 }

-- MplsVpnVrfBgpNbrPrefixTable

--
-- Ed note: this table will be removed as soon as the BGP4 MIB
--          is updated.
--
mplsVpnVrfBgpNbrPrefixTable OBJECT-TYPE


   SYNTAX        SEQUENCE OF MplsVpnVrfBgpNbrPrefixEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per-VRF vpnv4 multi-protocol
        prefixes supported by BGP."
   ::= { mplsVpnConf 5 }

mplsVpnVrfBgpNbrPrefixEntry OBJECT-TYPE
   SYNTAX        MplsVpnVrfBgpNbrPrefixEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table is created by an LSR for
        every BGP prefix associated with a VRF supporting a 
        MPLS/BGP VPN. The indexing provides an ordering of 
        BGP prefixes per VRF."
   INDEX  { mplsVpnVrfName, mplsVpnVrfBgpPathAttrIpAddrPrefix,
            mplsVpnVrfBgpPathAttrIpAddrPrefixLen, 
	    mplsVpnVrfBgpPathAttrPeer }
--   INDEX  { mplsVpnVrfName, bgp4PathAttrIpAddrPrefix,
--            bgp4PathAttrIpAddrPrefixLen, bgp4PathAttrPeer }
--
-- Changed indexing for this table so that it would compile 
-- (mpiecuch, 04/30/2002)

   ::= { mplsVpnVrfBgpNbrPrefixTable 1 }

MplsVpnVrfBgpNbrPrefixEntry ::= SEQUENCE {
     mplsVpnVrfBgpPathAttrPeer             InetAddress,
     mplsVpnVrfBgpPathAttrIpAddrPrefixLen  INTEGER,
     mplsVpnVrfBgpPathAttrIpAddrPrefix     InetAddress,
     mplsVpnVrfBgpPathAttrOrigin           INTEGER,
     mplsVpnVrfBgpPathAttrASPathSegment    OCTET STRING,
     mplsVpnVrfBgpPathAttrNextHop          InetAddress,
     mplsVpnVrfBgpPathAttrMultiExitDisc    INTEGER,
     mplsVpnVrfBgpPathAttrLocalPref        INTEGER,
     mplsVpnVrfBgpPathAttrAtomicAggregate  INTEGER,
     mplsVpnVrfBgpPathAttrAggregatorAS     INTEGER,
     mplsVpnVrfBgpPathAttrAggregatorAddr   InetAddress,
     mplsVpnVrfBgpPathAttrCalcLocalPref    INTEGER,
     mplsVpnVrfBgpPathAttrBest             INTEGER,
     mplsVpnVrfBgpPathAttrUnknown          OCTET STRING
}

mplsVpnVrfBgpPathAttrPeer OBJECT-TYPE
   SYNTAX     InetAddress
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       "The IP address of the peer where the path
        information was learned."
   ::= { mplsVpnVrfBgpNbrPrefixEntry 1 }

mplsVpnVrfBgpPathAttrIpAddrPrefixLen OBJECT-TYPE
   SYNTAX     INTEGER (0..32)
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       "Length in bits of the IP address prefix
        in the Network Layer Reachability
        Information field."
   ::= { mplsVpnVrfBgpNbrPrefixEntry 2 }

mplsVpnVrfBgpPathAttrIpAddrPrefix OBJECT-TYPE
   SYNTAX     InetAddress
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       "An IP address prefix in the Network Layer
        Reachability Information field.  This object
        is an IP address containing the prefix with
        length specified by mplsVpnVrfBgpPathAttrIpAddrPrefixLen.
        Any bits beyond the length specified by
        mplsVpnVrfBgpPathAttrIpAddrPrefixLen are zeroed."
   ::= { mplsVpnVrfBgpNbrPrefixEntry 3 }

mplsVpnVrfBgpPathAttrOrigin OBJECT-TYPE
   SYNTAX     INTEGER { igp(1),-- networks are interior
                        egp(2),-- networks learned via EGP
                        incomplete(3) -- undetermined
              }
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
       "The ultimate origin of the path
        information."
   ::= { mplsVpnVrfBgpNbrPrefixEntry 4 }

mplsVpnVrfBgpPathAttrASPathSegment OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (2..255))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The sequence of AS path segments.  Each AS
         path segment is represented by a triple
         <type, length, value>.

          The type is a 1-octet field which has two
          possible values:
              1      AS_SET: unordered set of ASs a
                     route in the UPDATE
                     message has traversed
              2      AS_SEQUENCE: ordered set of ASs
                     a route in the UPDATE
                     message has traversed.
                     The length is a 1-octet field containing the


                     number of ASs in the value field.

                     The value field contains one or more AS
                     numbers, each AS is represented in the octet
                     string as a pair of octets according to the
                     following algorithm:

                     first-byte-of-pair = ASNumber / 256;
                     second-byte-of-pair = ASNumber & 255;"
    ::= { mplsVpnVrfBgpNbrPrefixEntry 5 }

mplsVpnVrfBgpPathAttrNextHop OBJECT-TYPE
   SYNTAX     InetAddress
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
        "The address of the border router that
         should be used for the destination
         network."
   ::= { mplsVpnVrfBgpNbrPrefixEntry 6 }

mplsVpnVrfBgpPathAttrMultiExitDisc OBJECT-TYPE
    SYNTAX     INTEGER (-1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This metric is used to discriminate
         between multiple exit points to an
         adjacent autonomous system.  A value of -1
         indicates the absence of this attribute."
    ::= { mplsVpnVrfBgpNbrPrefixEntry 7 }

   mplsVpnVrfBgpPathAttrLocalPref OBJECT-TYPE
        SYNTAX     INTEGER (-1..2147483647)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
           "The originating BGP4 speaker's degree of
            preference for an advertised route.  A
            value of -1 indicates the absence of this
            attribute."
        ::= { mplsVpnVrfBgpNbrPrefixEntry 8 }

   mplsVpnVrfBgpPathAttrAtomicAggregate OBJECT-TYPE
        SYNTAX INTEGER { lessSpecificRrouteNotSelected(1),
                         lessSpecificRouteSelected(2)
                       }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION


             "Whether or not the local system has
              selected a less specific route without
              selecting a more specific route."
        ::= { mplsVpnVrfBgpNbrPrefixEntry 9 }

   mplsVpnVrfBgpPathAttrAggregatorAS OBJECT-TYPE
        SYNTAX     INTEGER (0..65535)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
             "The AS number of the last BGP4 speaker that
              performed route aggregation.  A value of
              zero (0) indicates the absence of this
              attribute."
        ::= { mplsVpnVrfBgpNbrPrefixEntry 10 }

   mplsVpnVrfBgpPathAttrAggregatorAddr OBJECT-TYPE
        SYNTAX     InetAddress
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The IP address of the last BGP4 speaker
             that performed route aggregation.  A value
             of 0.0.0.0 indicates the absence of this
             attribute."
        ::= { mplsVpnVrfBgpNbrPrefixEntry 11 }

   mplsVpnVrfBgpPathAttrCalcLocalPref OBJECT-TYPE
        SYNTAX     INTEGER (-1..2147483647)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The degree of preference calculated by the
             receiving BGP4 speaker for an advertised
             route.  A value of -1 indicates the
             absence of this attribute."
        ::= { mplsVpnVrfBgpNbrPrefixEntry 12 }

   mplsVpnVrfBgpPathAttrBest OBJECT-TYPE
        SYNTAX INTEGER { false(1),-- not chosen as best route
                         true(2)  -- chosen as best route
                       }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "An indication of whether or not this route
             was chosen as the best BGP4 route."
        ::= { mplsVpnVrfBgpNbrPrefixEntry 13 }

   mplsVpnVrfBgpPathAttrUnknown OBJECT-TYPE


        SYNTAX     OCTET STRING (SIZE(0..255))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "One or more path attributes not understood
             by this BGP4 speaker.  Size zero (0)
             indicates the absence of such
             attribute(s).  Octets beyond the maximum
             size, if any, are not recorded by this
             object."
        ::= { mplsVpnVrfBgpNbrPrefixEntry 14 }

-- VRF Security Table

mplsVpnVrfSecTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsVpnVrfSecEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per MPLS/BGP VPN VRF Table security
        features."
   ::= { mplsVpnConf 6 }

mplsVpnVrfSecEntry OBJECT-TYPE
   SYNTAX        MplsVpnVrfSecEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table is created by an LSR for
        every VRF capable of supporting MPLS/BGP VPN. Each
        entry in this table is used to indicate security-related
        information for each VRF entry."
   AUGMENTS      { mplsVpnVrfEntry }
      ::= { mplsVpnVrfSecTable 1 }

MplsVpnVrfSecEntry ::= SEQUENCE {
  mplsVpnVrfSecIllegalLabelViolations     Counter32,
  mplsVpnVrfSecIllegalLabelRcvThresh      Unsigned32
}

mplsVpnVrfSecIllegalLabelViolations OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Indicates the number of illegally received labels on this VPN/VRF."
   ::= { mplsVpnVrfSecEntry 1 }

mplsVpnVrfSecIllegalLabelRcvThresh OBJECT-TYPE
   SYNTAX        Unsigned32


   MAX-ACCESS    read-create
   STATUS        current
   DESCRIPTION
       "The number of illegally received labels above which this 
        notification is issued."
   ::= { mplsVpnVrfSecEntry 2 }

-- VRF Performance Table

mplsVpnVrfPerfTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsVpnVrfPerfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per MPLS/BGP VPN VRF Table performance
        information."
   ::= { mplsVpnPerf 1 }

mplsVpnVrfPerfEntry OBJECT-TYPE
   SYNTAX        MplsVpnVrfPerfEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table is created by an LSR for
        every VRF capable of supporting MPLS/BGP VPN."
   AUGMENTS      { mplsVpnVrfEntry }
      ::= { mplsVpnVrfPerfTable 1 }

MplsVpnVrfPerfEntry ::= SEQUENCE {
   mplsVpnVrfPerfRoutesAdded       Counter32,
   mplsVpnVrfPerfRoutesDeleted     Counter32,
   mplsVpnVrfPerfCurrNumRoutes     Unsigned32
}

mplsVpnVrfPerfRoutesAdded OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Indicates the number of routes added to this VPN/VRF over the
        coarse of its lifetime."
   ::= { mplsVpnVrfPerfEntry 1 }

mplsVpnVrfPerfRoutesDeleted OBJECT-TYPE
   SYNTAX        Counter32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Indicates the number of routes removed from this VPN/VRF."
   ::= { mplsVpnVrfPerfEntry 2 }


mplsVpnVrfPerfCurrNumRoutes     OBJECT-TYPE
   SYNTAX        Unsigned32
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
       "Indicates the number of routes currently used by this VRF."
   ::= { mplsVpnVrfPerfEntry 3 }

-- VRF Routing Table

mplsVpnVrfRouteTable  OBJECT-TYPE
   SYNTAX        SEQUENCE OF MplsVpnVrfRouteEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "This table specifies per-interface MPLS/BGP VPN VRF Table
        routing information. Entries in this table define VRF routing
        entries associated with the specified MPLS/VPN interfaces. Note
        that this table contains both BGP and IGP routes, as both may
        appear in the same VRF."
    REFERENCE
       "1.  RFC 1213 Section 6.6, The IP Group.
        2.  RFC 2096 "
   ::= { mplsVpnRoute 1 }

mplsVpnVrfRouteEntry OBJECT-TYPE
   SYNTAX        MplsVpnVrfRouteEntry
   MAX-ACCESS    not-accessible
   STATUS        current
   DESCRIPTION
       "An entry in this table is created by an LSR for every route
        present configured (either dynamically or statically) within
        the context of a specific VRF capable of supporting MPLS/BGP
        VPN. The indexing provides an ordering of VRFs per-VPN
        interface."
      INDEX  { mplsVpnVrfName, mplsVpnVrfRouteDest,
               mplsVpnVrfRouteMask, mplsVpnVrfRouteTos,
               mplsVpnVrfRouteNextHop }
      ::= { mplsVpnVrfRouteTable 1 }

MplsVpnVrfRouteEntry ::= SEQUENCE {
       mplsVpnVrfRouteDest               InetAddress,
       mplsVpnVrfRouteDestAddrType       InetAddressType,
       mplsVpnVrfRouteMask               InetAddress,
       mplsVpnVrfRouteMaskAddrType       InetAddressType,
       mplsVpnVrfRouteTos                Unsigned32,
       mplsVpnVrfRouteNextHop            InetAddress,
       mplsVpnVrfRouteNextHopAddrType    InetAddressType,
       mplsVpnVrfRouteIfIndex            InterfaceIndex,


       mplsVpnVrfRouteType               INTEGER,
       mplsVpnVrfRouteProto              INTEGER,
       mplsVpnVrfRouteAge                Unsigned32,
       mplsVpnVrfRouteInfo               OBJECT IDENTIFIER,
       mplsVpnVrfRouteNextHopAS          Unsigned32,
       mplsVpnVrfRouteMetric1            Integer32,
       mplsVpnVrfRouteMetric2            Integer32,
       mplsVpnVrfRouteMetric3            Integer32,
       mplsVpnVrfRouteMetric4            Integer32,
       mplsVpnVrfRouteMetric5            Integer32,
       mplsVpnVrfRouteRowStatus          RowStatus,
       mplsVpnVrfRouteStorageType        StorageType
   }

mplsVpnVrfRouteDest  OBJECT-TYPE
      SYNTAX        InetAddress
      MAX-ACCESS    not-accessible
      STATUS        current
      DESCRIPTION
          "The destination IP address of this route.
           This object may not take a Multicast (Class D)
           address value.

           Any assignment (implicit or otherwise) of an
           instance of this object to a value x must be
           rejected if the bit-wise logical-AND of x with
           the value of the corresponding instance of the
           mplsVpnVrfRouteMask object is not equal to x."
      ::= { mplsVpnVrfRouteEntry 1 }

mplsVpnVrfRouteDestAddrType  OBJECT-TYPE
      SYNTAX        InetAddressType
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The address type of the mplsVpnVrfRouteDest
           entry."
      ::= { mplsVpnVrfRouteEntry 2 }

mplsVpnVrfRouteMask  OBJECT-TYPE
      SYNTAX        InetAddress
      MAX-ACCESS    not-accessible
      STATUS        current
      DESCRIPTION
          "Indicate the mask to be logical-ANDed with the
           destination  address  before  being compared to
           the value  in  the  mplsVpnVrfRouteDest field.
           For those  systems  that  do  not support
           arbitrary subnet masks, an agent constructs the
           value of the mplsVpnVrfRouteMask by reference


           to the IP Address Class.

           Any assignment (implicit or otherwise) of an
           instance of this object to a value x must be
           rejected if the bit-wise logical-AND of x with
           the value of the corresponding instance of the
           mplsVpnVrfRouteDest object is not equal to
           mplsVpnVrfRouteDest."
      ::= { mplsVpnVrfRouteEntry 3 }

mplsVpnVrfRouteMaskAddrType  OBJECT-TYPE
      SYNTAX        InetAddressType
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The address type of mplsVpnVrfRouteMask."
      ::= { mplsVpnVrfRouteEntry 4 }

mplsVpnVrfRouteTos  OBJECT-TYPE
      SYNTAX        Unsigned32
      MAX-ACCESS    not-accessible
      STATUS        current
      DESCRIPTION
         "The IP TOS Field is used to specify the policy to
          be applied to this route.  The encoding of IP TOS
          is as specified  by  the  following convention.
          Zero indicates the default path if no more
          specific policy applies.

          +-----+-----+-----+-----+-----+-----+-----+-----+
          |                 |                       |     |
          |   PRECEDENCE    |    TYPE OF SERVICE    |  0  |
          |                 |                       |     |
          +-----+-----+-----+-----+-----+-----+-----+-----+

                     IP TOS                IP TOS
                Field     Policy      Field     Policy
                Contents    Code      Contents    Code
                0 0 0 0  ==>   0      0 0 0 1  ==>   2
                0 0 1 0  ==>   4      0 0 1 1  ==>   6
                0 1 0 0  ==>   8      0 1 0 1  ==>  10
                0 1 1 0  ==>  12      0 1 1 1  ==>  14
                1 0 0 0  ==>  16      1 0 0 1  ==>  18
                1 0 1 0  ==>  20      1 0 1 1  ==>  22
                1 1 0 0  ==>  24      1 1 0 1  ==>  26
                1 1 1 0  ==>  28      1 1 1 1  ==>  30."
      ::= { mplsVpnVrfRouteEntry 5 }

mplsVpnVrfRouteNextHop  OBJECT-TYPE
      SYNTAX        InetAddress
      MAX-ACCESS    not-accessible
      STATUS        current
      DESCRIPTION
          "On remote routes, the address of the next
           system en route; Otherwise, 0.0.0.0. ."
      ::= { mplsVpnVrfRouteEntry 6 }

mplsVpnVrfRouteNextHopAddrType  OBJECT-TYPE
      SYNTAX        InetAddressType
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The address type of the mplsVpnVrfRouteNextHopAddrType
           object."
      ::= { mplsVpnVrfRouteEntry 7 }

mplsVpnVrfRouteIfIndex  OBJECT-TYPE
      SYNTAX        InterfaceIndex
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The ifIndex value that identifies the local
           interface  through  which  the next hop of this
           route should be reached."
      ::= { mplsVpnVrfRouteEntry 8 }

mplsVpnVrfRouteType  OBJECT-TYPE
      SYNTAX  INTEGER { other  (1), -- not specified
                        reject (2), -- route to discard traffic
                        local  (3), -- local interface
                        remote (4)  -- remote destination
                      }
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The type of route.  Note that local(3)  refers
           to a route for which the next hop is the final
           destination; remote(4) refers to a route for
           that the next  hop is not the final destination.
           Routes which do not result in traffic forwarding or
           rejection should not be displayed even if the
           implementation keeps them stored internally.

           reject (2) refers to a route which, if matched,
           discards the message as unreachable. This is used
           in some protocols as a means of correctly aggregating
           routes."
      ::= { mplsVpnVrfRouteEntry 9 }

mplsVpnVrfRouteProto  OBJECT-TYPE


      SYNTAX INTEGER { other     (1),  -- not specified
                       local     (2),  -- local interface
                       netmgmt   (3),  -- static route
                       icmp      (4),  -- result of ICMP Redirect

                        -- the following are all dynamic
                        -- routing protocols

                        egp        (5),  -- Exterior Gateway Protocol
                        ggp        (6),  -- Gateway-Gateway Protocol
                        hello      (7),  -- FuzzBall HelloSpeak
                        rip        (8),  -- Berkeley RIP or RIP-II
                        isIs       (9),  -- Dual IS-IS
                        esIs       (10), -- ISO 9542
                        ciscoIgrp  (11), -- Cisco IGRP
                        bbnSpfIgp  (12), -- BBN SPF IGP
                        ospf       (13), -- Open Shortest Path First
                        bgp        (14), -- Border Gateway Protocol
                        idpr       (15), -- InterDomain Policy Routing
                        ciscoEigrp (16)  -- Cisco EIGRP
                      }
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The routing mechanism via which this route was
           learned.  Inclusion of values for gateway rout-
           ing protocols is not  intended  to  imply  that
           hosts should support those protocols."
      ::= { mplsVpnVrfRouteEntry 10 }

mplsVpnVrfRouteAge                OBJECT-TYPE
      SYNTAX        Unsigned32
      MAX-ACCESS    read-only
      STATUS        current
      DESCRIPTION
          "The number of seconds since this route was
           last updated or otherwise determined to be
           correct. Note that no semantics of `too old'
           can be implied except through knowledge of the
           routing protocol by which the route was
           learned."
      ::= { mplsVpnVrfRouteEntry 11 }

mplsVpnVrfRouteInfo               OBJECT-TYPE
      SYNTAX        OBJECT IDENTIFIER
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "A reference to MIB definitions specific to the
           particular routing protocol which is responsi-


           ble for this route, as determined by the  value
           specified  in the route's mplsVpnVrfRouteProto
           value. If this information is not present, its
           value SHOULD be set to the OBJECT IDENTIFIER
           { 0 0 }, which is a syntactically valid object
           identif-ier, and any implementation conforming
           to ASN.1 and the Basic Encoding Rules must be
           able to generate and recognize this value."
      ::= { mplsVpnVrfRouteEntry 12 }

mplsVpnVrfRouteNextHopAS          OBJECT-TYPE
      SYNTAX        Unsigned32
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The Autonomous System Number of the Next Hop.
           The semantics of this object are determined by
           the routing-protocol specified in the route's
           mplsVpnVrfRouteProto value. When this object is
           unknown or not relevant its value should be set
           to zero."
      ::= { mplsVpnVrfRouteEntry 13 }

mplsVpnVrfRouteMetric1  OBJECT-TYPE
      SYNTAX        Integer32
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "The primary routing metric for this route.
           The semantics of this metric are determined by
           the routing-protocol specified in  the  route's
           mplsVpnVrfRouteProto value. If this metric is not
           used, its value should be set to -1."
      ::= { mplsVpnVrfRouteEntry 14 }

mplsVpnVrfRouteMetric2  OBJECT-TYPE
      SYNTAX        Integer32
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "An alternate routing metric for this route.
           The semantics of this metric are determined by
           the routing-protocol specified in  the  route's
           mplsVpnVrfRouteProto value. If this metric is not
           used, its value should be set to -1."
      ::= { mplsVpnVrfRouteEntry 15 }

mplsVpnVrfRouteMetric3  OBJECT-TYPE
      SYNTAX        Integer32
      MAX-ACCESS    read-create


      STATUS        current
      DESCRIPTION
          "An alternate routing metric for this route.
           The semantics of this metric are determined by
           the routing-protocol specified in  the  route's
           mplsVpnVrfRouteProto value. If this metric is not
           used, its value should be set to -1."
      ::= { mplsVpnVrfRouteEntry 16 }

mplsVpnVrfRouteMetric4  OBJECT-TYPE
      SYNTAX        Integer32
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "An alternate routing metric for this route.
           The semantics of this metric are determined by
           the routing-protocol specified in  the  route's
           mplsVpnVrfRouteProto value. If this metric is not
           used, its value should be set to -1."
      ::= { mplsVpnVrfRouteEntry 17 }

mplsVpnVrfRouteMetric5  OBJECT-TYPE
      SYNTAX        Integer32
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "An alternate routing metric for this route.
           The semantics of this metric are determined by
           the routing-protocol specified in  the  route's
           mplsVpnVrfRouteProto value. If this metric is not
           used, its value should be set to -1."
      ::= { mplsVpnVrfRouteEntry 18 }

mplsVpnVrfRouteRowStatus  OBJECT-TYPE
      SYNTAX        RowStatus
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "Row status for this table. It is used according
           to row installation and removal conventions."
      ::= { mplsVpnVrfRouteEntry 19 }

mplsVpnVrfRouteStorageType  OBJECT-TYPE
      SYNTAX        StorageType
      MAX-ACCESS    read-create
      STATUS        current
      DESCRIPTION
          "Storage type value."
      ::= { mplsVpnVrfRouteEntry 20 }


-- MPLS/BGP VPN Notifications

mplsVrfIfUp NOTIFICATION-TYPE
--   OBJECTS     { 
--
--	mplsVpnInterfaceConfIndex,
--      mplsVpnVrfName
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'.  They are not allowed to be included within
-- a notification.  This change to the IETF draft was necessary for
-- the MIB to compile.  (mpiecuch, 04/30/2002)
--
--               }
   STATUS      current
   DESCRIPTION
       "This notification is generated when:
        a. The ifOperStatus of an interface associated with a VRF 
           changes to the up(1) state.
        b. When an interface with ifOperStatus = up(1) is 
           associated with a VRF."
   ::= { mplsVpnNotifications 1 }

mplsVrfIfDown NOTIFICATION-TYPE
--   OBJECTS     {
--
--	mplsVpnInterfaceConfIndex,
--      mplsVpnVrfName
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'.  They are not allowed to be included within
-- a notification.  This change to the IETF draft was necessary for
-- the MIB to compile.  (mpiecuch, 04/30/2002)
--
--               }
   STATUS      current
   DESCRIPTION
       "This notification is generated when:
        a. The ifOperStatus of an interface associated with a VRF 
           changes to the down(1) state.
        b. When an interface with ifOperStatus = up(1) state is 
           disassociated with a VRF."
   ::= { mplsVpnNotifications 2 }

mplsNumVrfRouteMidThreshExceeded NOTIFICATION-TYPE
--   OBJECTS     {
--
--      mplsVpnVrfName,
--      mplsVpnVrfPerfCurrNumRoutes
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'.  They are not allowed to be included within
-- a notification.  This change to the IETF draft was necessary for
-- the MIB to compile.  (mpiecuch, 04/30/2002)
--
--               }
   STATUS      current
   DESCRIPTION
       "This notification is generated when the number of routes
        contained by the specified VRF exceeds the value indicated by
        mplsVrfMidRouteThreshold."
   ::= { mplsVpnNotifications 3 }

mplsNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE
--   OBJECTS     {
--
--      mplsVpnVrfName,
--      mplsVpnVrfPerfCurrNumRoutes
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'.  They are not allowed to be included within
-- a notification.  This change to the IETF draft was necessary for
-- the MIB to compile.  (mpiecuch, 04/30/2002)
--
--               }
   STATUS      current
   DESCRIPTION
       "This notification is generated when the number of routes
        contained by the specified VRF reaches or attempts to exceed
        the maximum allowed value as indicated by
        mplsVrfMaxRouteThreshold."
   ::= { mplsVpnNotifications 4 }


mplsNumVrfSecIllegalLabelThreshExceeded NOTIFICATION-TYPE
--   OBJECTS     { 
--
--       mplsVpnVrfName,
--       mplsVpnVrfSecIllegalLabelViolations
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'.  They are not allowed to be included within
-- a notification.  This change to the IETF draft was necessary for
-- the MIB to compile.  (mpiecuch, 04/30/2002)
--
--               }
   STATUS      current
   DESCRIPTION
       "This notification is generated when the number of illegal
        label violations on a VRF as indicated by 
        mplsVpnVrfSecIllegalLabelViolations has exceeded 
        mplsVpnVrfSecIllegalLabelRcvThresh. The threshold is not 
        included in the varbind here because the value of 
        mplsVpnVrfSecIllegalLabelViolations should be one greater than 
        the threshold at the time this notification is issued."
   ::= { mplsVpnNotifications 5 }

-- Conformance Statement
mplsVpnGroups
      OBJECT IDENTIFIER ::= { mplsVpnConformance 1 }

mplsVpnCompliances
      OBJECT IDENTIFIER ::= { mplsVpnConformance 2 }

-- Module Compliance

mplsVpnModuleCompliance MODULE-COMPLIANCE
      STATUS current
      DESCRIPTION
          "Compliance statement for agents that support the
           MPLS VPN MIB."
      MODULE -- this module

         -- The mandatory groups have to be implemented
         -- by all LSRs supporting MPLS BGP/VPNs. However,
         -- they may all be supported
         -- as read-only objects in the case where manual
         -- configuration is unsupported.

         MANDATORY-GROUPS    { mplsVpnScalarGroup,
                               mplsVpnVrfGroup,
                               mplsVpnInterfaceGroup,
                               mplsVpnPerfGroup,
                               mplsVpnVrfRouteGroup,
                               mplsVpnVrfBgpNbrGroup,
                               mplsVpnVrfRouteTargetGroup
                             }

   ::= { mplsVpnCompliances 1 }

   -- Units of conformance.


   mplsVpnScalarGroup OBJECT-GROUP
      OBJECTS { mplsVpnConfiguredVrfs,
                mplsVpnActiveVrfs,
                mplsVpnConnectedInterfaces,
                mplsVpnNotificationEnable,
                mplsVpnVrfConfMaxPossibleRoutes
             }
      STATUS  current
      DESCRIPTION
             "Collection of scalar objects required for MPLS VPN
              management."
      ::= { mplsVpnGroups 1 }

   mplsVpnVrfGroup OBJECT-GROUP
      OBJECTS { mplsVpnVrfDescription,
--              mplsVpnVrfName,
-- Commented out so that MIB would compile (mpiecuch, 04/30/2002)
                mplsVpnVrfRouteDistinguisher,
                mplsVpnVrfCreationTime,
                mplsVpnVrfOperStatus,
                mplsVpnVrfActiveInterfaces,
                mplsVpnVrfAssociatedInterfaces,
                mplsVpnVrfConfMidRouteThreshold,
                mplsVpnVrfConfHighRouteThreshold,
                mplsVpnVrfConfMaxRoutes,
                mplsVpnVrfConfLastChanged,
                mplsVpnVrfConfRowStatus,
                mplsVpnVrfConfStorageType
       }

      STATUS  current
      DESCRIPTION
             "Collection of objects needed for MPLS VPN VRF
              management."
      ::= { mplsVpnGroups 2 }

   mplsVpnInterfaceGroup OBJECT-GROUP
        OBJECTS { mplsVpnInterfaceLabelEdgeType,
--                mplsVpnInterfaceConfIndex,
-- Commented out so that MIB would compile (mpiecuch, 04/30/2002)
                  mplsVpnInterfaceVpnClassification,
                  mplsVpnInterfaceVpnRouteDistProtocol,
                  mplsVpnInterfaceConfStorageType,
                  mplsVpnInterfaceConfRowStatus
           }

      STATUS  current
      DESCRIPTION
             "Collection of objects needed for MPLS VPN interface
              management."
      ::= { mplsVpnGroups 3 }


   mplsVpnPerfGroup OBJECT-GROUP
      OBJECTS { mplsVpnVrfPerfRoutesAdded,
                mplsVpnVrfPerfRoutesDeleted,
                mplsVpnVrfPerfCurrNumRoutes
             }

      STATUS  current
      DESCRIPTION
             "Collection of objects needed for MPLS VPN
              performance information."
      ::= { mplsVpnGroups 4 }

   mplsVpnVrfBgpNbrGroup OBJECT-GROUP
      OBJECTS { mplsVpnVrfBgpNbrRole,
                mplsVpnVrfBgpNbrType,
                mplsVpnVrfBgpNbrAddr,
                mplsVpnVrfBgpNbrRowStatus,
                mplsVpnVrfBgpNbrStorageType
              }
      STATUS  current
      DESCRIPTION
             "Collection of objects needed for MPLS VPN
              bgp neighbor-related information."
      ::= { mplsVpnGroups 5 }

  mplsVpnVrfBgpPrefixGroup OBJECT-GROUP
      OBJECTS { 
     mplsVpnVrfBgpPathAttrOrigin,
     mplsVpnVrfBgpPathAttrASPathSegment,
     mplsVpnVrfBgpPathAttrNextHop,
     mplsVpnVrfBgpPathAttrMultiExitDisc,
     mplsVpnVrfBgpPathAttrLocalPref,
     mplsVpnVrfBgpPathAttrAtomicAggregate,
     mplsVpnVrfBgpPathAttrAggregatorAS,
     mplsVpnVrfBgpPathAttrAggregatorAddr,
     mplsVpnVrfBgpPathAttrCalcLocalPref,
     mplsVpnVrfBgpPathAttrBest,
     mplsVpnVrfBgpPathAttrUnknown
}
      STATUS  current
      DESCRIPTION
             "Collection of objects needed for MPLS VPN
              bgp neighbor-related information."
      ::= { mplsVpnGroups 6 }

   mplsVpnSecGroup OBJECT-GROUP
      OBJECTS { mplsVpnVrfSecIllegalLabelViolations,
                mplsVpnVrfSecIllegalLabelRcvThresh }


      STATUS  current
      DESCRIPTION
             "Collection of objects needed for MPLS VPN
              security-related information."
      ::= { mplsVpnGroups 7 }

   mplsVpnVrfRouteGroup OBJECT-GROUP
      OBJECTS { mplsVpnVrfRouteDestAddrType,
                mplsVpnVrfRouteMaskAddrType,
--                mplsVpnVrfRouteTos,
--                mplsVpnVrfRouteNextHop,
-- Commented out so MIB will compile (mpiecuch, 04/30/2002)
                mplsVpnVrfRouteNextHopAddrType,
                mplsVpnVrfRouteIfIndex,
                mplsVpnVrfRouteType,
                mplsVpnVrfRouteProto,
                mplsVpnVrfRouteAge,
                mplsVpnVrfRouteInfo,
                mplsVpnVrfRouteNextHopAS,
                mplsVpnVrfRouteMetric1,
                mplsVpnVrfRouteMetric2,
                mplsVpnVrfRouteMetric3,
                mplsVpnVrfRouteMetric4,
                mplsVpnVrfRouteMetric5,
                mplsVpnVrfRouteRowStatus,
                mplsVpnVrfRouteStorageType
              }
      STATUS  current
      DESCRIPTION
             "Objects required for VRF route table management."
   ::= { mplsVpnGroups 8 }

   mplsVpnVrfRouteTargetGroup OBJECT-GROUP
      OBJECTS { mplsVpnVrfRouteTarget,
	        mplsVpnVrfRouteTargetDescr,
                mplsVpnVrfRouteTargetRowStatus
              }
      STATUS  current
      DESCRIPTION
             "Objects required for VRF route target management."
   ::= { mplsVpnGroups 9 }

   mplsVpnNotificationGroup NOTIFICATION-GROUP
       NOTIFICATIONS { mplsVrfIfUp,
                       mplsVrfIfDown,
                       mplsNumVrfRouteMidThreshExceeded,
                       mplsNumVrfRouteMaxThreshExceeded,
                       mplsNumVrfSecIllegalLabelThreshExceeded
                     }
      STATUS  current
      DESCRIPTION
             "Objects required for MPLS VPN notifications."


   ::= { mplsVpnGroups 10 }

-- End of MPLS-VPN-MIB
END