diff options
Diffstat (limited to 'MIBS/ubiquoss/UBQS-ERPS-MIB')
| -rw-r--r-- | MIBS/ubiquoss/UBQS-ERPS-MIB | 804 |
1 files changed, 804 insertions, 0 deletions
diff --git a/MIBS/ubiquoss/UBQS-ERPS-MIB b/MIBS/ubiquoss/UBQS-ERPS-MIB new file mode 100644 index 0000000..9d88f5b --- /dev/null +++ b/MIBS/ubiquoss/UBQS-ERPS-MIB @@ -0,0 +1,804 @@ +-- *****************************************************************
+-- UBQS-ERPS-MIB: Ubiquoss ERPS MIB
+--
+-- Nov 2010, Park Hyung Eun
+--
+-- Copyright (c) 2010 by Ubiquoss, Corp.
+-- All rights reserved.
+-- *****************************************************************
+--
+
+UBQS-ERPS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ NOTIFICATION-TYPE,
+ Counter32,
+ IpAddress,
+ Gauge32,
+ Integer32,
+ Unsigned32
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE,
+ OBJECT-GROUP,
+ NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ TEXTUAL-CONVENTION,
+ RowStatus,
+ DisplayString,
+ TruthValue,
+ FROM SNMPv2-TC
+ ifIndex,
+ FROM IF-MIB
+ VlanIndex,
+ FROM Q-BRIDGE-MIB
+ ubiSysMacAddr,
+ FROM UBQS-SYSTEM-MIB
+ Dot1agCfmMaintDomainName,
+ Dot1agCfmMaintAssocName,
+ FROM UBQS-CFM-MIB
+ UbiBridgeId,
+ FROM UBQS-TC
+ ubiMgmtv2
+ FROM UBQS-SMI;
+
+
+ubiErpsMIB MODULE-IDENTITY
+ LAST-UPDATED "201011290000Z"
+ ORGANIZATION "Ubiquoss Corp."
+ CONTACT-INFO
+ " Ubiquoss
+ Customer Service
+
+ Postal: 24F Milennium B/D,
+ 467-12, Dogok-Dong,
+ GangNam-Gu, Seoul 135-270
+ Korea
+
+ Tel: 82-2-2190-3100"
+ DESCRIPTION
+ ""
+ ::= { ubiMgmtv2 11 }
+
+
+
+-- *****************************************************************
+-- Textual Conventions
+-- *****************************************************************
+
+
+-- *****************************************************************
+-- ubiERPSMIB
+-- *****************************************************************
+ubiErpsMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiErpsMIB 0 }
+ubiErpsMIBObjects OBJECT IDENTIFIER ::= { ubiErpsMIB 1 }
+ubiErpsMIBConformance OBJECT IDENTIFIER ::= { ubiErpsMIB 2 }
+
+
+ubiErpsGlobal OBJECT IDENTIFIER ::= { ubiErpsMIBObjects 4 }
+ubiErpsNotificationEnables OBJECT IDENTIFIER ::= { ubiErpsMIBObjects 5 }
+
+
+-- *****************************************************************
+-- ubiCfmNotifications
+-- *****************************************************************
+ubiErpsMIBNotifications OBJECT IDENTIFIER ::= { ubiErpsMIBNotificationPrefix 0 }
+
+ ubiErpsRingStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ ubiSysMacAddr,
+ ubiErpsSwitchBridgeId,
+ ubiErpsSwitchRingId,
+ ubiErpsSwitchCurrentState,
+ ubiErpsSwitchEastIf,
+ ubiErpsSwitchEastIfState,
+ ubiErpsSwitchWestIf,
+ ubiErpsSwitchWestIfState,
+ }
+ STATUS current
+ DESCRIPTION
+ "Notification of ERPS State Change."
+ ::= { ubiErpsMIBNotifications 1 }
+
+ ubiErpsRingEastIfStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ ubiSysMacAddr,
+ ubiErpsSwitchBridgeId,
+ ubiErpsSwitchRingId,
+ ubiErpsSwitchEastIf,
+ ubiErpsSwitchEastIfState
+ }
+ STATUS current
+ DESCRIPTION
+ "Notification of East Ring Port State Change."
+ ::= { ubiErpsMIBNotifications 2 }
+
+ ubiErpsRingWestIfStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ ubiSystemMacAddr,
+ ubiErpsSwitchBridgeId,
+ ubiErpsSwitchRingId,
+ ubiErpsSwitchWestIf,
+ ubiErpsSwitchWestIfState
+ }
+ STATUS current
+ DESCRIPTION
+ "Notification of West Ring Port State Change."
+ ::= { ubiErpsMIBNotifications 3 }
+
+
+-- *****************************************************************
+-- ubiErpsBaseTable
+-- *****************************************************************
+
+ ubiErpsBaseTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UbiErpsBaseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of ERPS Base information."
+ ::= { ubiErpsMIBObjects 1 }
+
+ ubiErpsBaseEntry OBJECT-TYPE
+ SYNTAX UbiErpsBaseEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of ERPS Base information."
+ INDEX { ubiErpsBaseBridgeId, ubiErpsBaseRingId,
+ ubiErpsBaseEastIf, ubiErpsBaseWestIf,
+ ubiErpsBaseInstId }
+ ::= { ubiErpsBaseTable 1 }
+
+
+ UbiErpsBaseEntry ::= SEQUENCE {
+ ubiErpsBaseBridgeId UbiBridgeId,
+ ubiErpsBaseRingId Integer32,
+ ubiErpsBaseEastIf Integer32,
+ ubiErpsBaseWestIf Integer32,
+ ubiErpsBaseInstId Integer32,
+ ubiErpsBaseRowStatus RowStatus
+ }
+
+ ubiErpsBaseBridgeId OBJECT-TYPE
+ SYNTAX UbiBridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ERPS Base Bridge ID."
+ ::= { ubiErpsBaseEntry 1 }
+
+ ubiErpsBaseRingId OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ERPS Base Ring ID."
+ ::= { ubiErpsBaseEntry 2 }
+
+ ubiErpsBaseEastIf OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ERPS Base East Ring port."
+ ::= { ubiErpsBaseEntry 3 }
+
+ ubiErpsBaseWestIf OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ERPS Base West Ring port."
+ ::= { ubiErpsBaseEntry 4 }
+
+ ubiErpsBaseInstId OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ERPS Base Instance ID."
+ ::= { ubiErpsBaseEntry 5 }
+
+ ubiErpsBaseRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of the row."
+ ::= { ubiErpsBaseEntry 6 }
+
+
+-- *****************************************************************
+-- ubiErpsVlanTable
+-- *****************************************************************
+
+ ubiErpsVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UbiErpsVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of ERPS Vlan information."
+ ::= { ubiErpsMIBObjects 2 }
+
+ ubiErpsVlanEntry OBJECT-TYPE
+ SYNTAX UbiErpsVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of ERPS Vlan information."
+ INDEX { ubiErpsBaseBridgeId, ubiErpsBaseRingId,
+ ubiErpsVlanVlanId, ubiErpsVlanServiceVlan }
+ ::= { ubiErpsVlanTable 1 }
+
+
+ UbiErpsVlanEntry ::= SEQUENCE {
+ ubiErpsVlanVlanId VlanIndex,
+ ubiErpsVlanServiceVlanType INTEGER,
+ ubiErpsVlanRowStatus RowStatus
+ }
+
+ ubiErpsVlanVlanId OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Vlan ID."
+ ::= { ubiErpsVlanEntry 1 }
+
+ ubiErpsVlanServiceVlanType OBJECT-TYPE
+ SYNTAX INTEGER {
+ service_vlan(1),
+ protected_vlan(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ERPS Vlan Type.
+ service_vlan(1) - Control Vlan
+ protected_vlan(2) - Service Valn"
+ ::= { ubiErpsVlanEntry 2 }
+
+ ubiErpsVlanRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of the row."
+ ::= { ubiErpsVlanEntry 3 }
+
+
+
+-- *****************************************************************
+-- ubiErpsSwitchTable
+-- *****************************************************************
+
+ ubiErpsSwitchTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UbiErpsSwitchEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of ERPS Switch information."
+ ::= { ubiErpsMIBObjects 3 }
+
+ ubiErpsSwitchEntry OBJECT-TYPE
+ SYNTAX UbiErpsSwitchEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of ERPS Switch information."
+ INDEX { ubiErpsSwitchBridgeId, ubiErpsSwitchRingId }
+ ::= { ubiErpsSwitchTable 1 }
+
+
+ UbiErpsSwitchEntry ::= SEQUENCE {
+ ubiErpsSwitchBridgeId UbiBridgeId,
+ ubiErpsSwitchRingId Integer32,
+ ubiErpsSwitchVersion INTEGER,
+ ubiErpsSwitchNodeType INTEGER,
+ ubiErpsSwitchEastIf Integer32,
+ ubiErpsSwitchWestIf Integer32,
+ ubiErpsSwitchEastIfState INTEGER,
+ ubiErpsSwitchWestIfState INTEGER,
+ ubiErpsSwitchRingProtectionLink INTEGER,
+ ubiErpsSwitchRevertiveMode TruthValue,
+ ubiErpsSwitchMegLevel Integer32,
+ ubiErpsSwitchPropagateTc TruthValue,
+ ubiErpsSwitchGuardTimer Integer32,
+ ubiErpsSwitchHoldOff Integer32,
+ ubiErpsSwitchWaitToRestore Integer32,
+ ubiErpsSwitchWaitToBlock Integer32,
+ ubiErpsSwitchMajorRingId Integer32,
+ ubiErpsSwitchEthoamEvent TruthValue,
+ ubiErpsSwitchForcedSwitch INTEGER,
+ ubiErpsSwitchManualSwitch INTEGER,
+ ubiErpsSwitchClear INTEGER,
+ ubiErpsSwitchCurrentState INTEGER,
+ ubiErpsSwitchLastEvent INTEGER,
+ ubiErpsSwitchSuppressEast TruthValue,
+ ubiErpsSwitchSuppressWest TruthValue,
+ ubiErpsSwitchCotNode TruthValue,
+ ubiErpsSwitchCotNbrPort INTEGER,
+ ubiErpsSwitchMdName Dot1agCfmMaintDomainName,
+ ubiErpsSwitchMaName Dot1agCfmMaintAssocName
+ }
+
+ ubiErpsSwitchBridgeId OBJECT-TYPE
+ SYNTAX UbiBridgeId
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Bridge ID ERPS is running."
+ ::= { ubiErpsSwitchEntry 1 }
+
+ ubiErpsSwitchRingId OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "G8032 ERPS Ring ID."
+ ::= { ubiErpsSwitchEntry 2 }
+
+ ubiErpsSwitchVersion OBJECT-TYPE
+ SYNTAX INTEGER (1 | 2)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "G8032 ERPS Version.
+ 1 - Version 1
+ 2 - Version 2"
+ ::= { ubiErpsSwitchEntry 3 }
+
+ ubiErpsSwitchNodeType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ring_none(1),
+ rpl_owner(2),
+ rpl_neighbor(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "G8032 ERPS Node Type.
+ ring_none(1) - non-RPL Owner
+ rpl_owner(2) - RPL Owner
+ rpl_neigbor(3) - RPL Neighober"
+ ::= { ubiErpsSwitchEntry 4 }
+
+
+ ubiErpsSwitchEastIf OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "East Ring port of ERPS."
+ ::= { ubiErpsSwitchEntry 5 }
+
+
+ ubiErpsSwitchWestIf OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "West Ring port of ERPS."
+ ::= { ubiErpsSwitchEntry 6 }
+
+
+ ubiErpsSwitchEastIfState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(1),
+ block(2),
+ forward(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Port status of east ring port."
+ ::= { ubiErpsSwitchEntry 7 }
+
+
+ ubiErpsSwitchWestIfState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(1),
+ block(2),
+ forward(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Port status of west ring port."
+ ::= { ubiErpsSwitchEntry 8 }
+
+
+ ubiErpsSwitchRingProtectionLink OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ east(2),
+ west(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indication of Ring protection link(RPL).
+ none(1) - non-RPL
+ east(2) - East port is RPL
+ wast(3) - West port is RPL"
+ ::= { ubiErpsSwitchEntry 9 }
+
+ ubiErpsSwitchRevertiveMode OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "G8032 ERPS Switch Mode.
+ - If this is configured, it is revertive mode,
+ is not, it is non-revertive mode."
+ ::= { ubiErpsSwitchEntry 10 }
+
+ ubiErpsSwitchMegLevel OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "G8032 ERPS MEG Level."
+ ::= { ubiErpsSwitchEntry 11 }
+
+ ubiErpsSwitchPropagateTc OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If this is configured, when sub-ring topolgy is changed,
+ sub-ring transmits Topology Change Message to major-ring."
+ ::= { ubiErpsSwitchEntry 12 }
+
+ ubiErpsSwitchGuardTimer OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "milliseconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Guard Timer value."
+ ::= { ubiErpsSwitchEntry 13 }
+
+ ubiErpsSwitchHoldOff OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "milliseconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Hold-off Timer value."
+ ::= { ubiErpsSwitchEntry 14 }
+
+ ubiErpsSwitchWaitToRestore OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "minutes"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Wait to Restore Timer value."
+ ::= { ubiErpsSwitchEntry 15 }
+
+ ubiErpsSwitchWaitToBlock OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Waith to Block Timer value."
+ ::= { ubiErpsSwitchEntry 16 }
+
+ ubiErpsSwitchMajorRingId OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Major-ring ID who is inter operated."
+ ::= { ubiErpsSwitchEntry 17 }
+
+ ubiErpsSwitchEthoamEvent OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable interopering with CFM CCM."
+ ::= { ubiErpsSwitchEntry 18 }
+
+ ubiErpsSwitchForcedSwitch OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ east(2),
+ west(3),
+ both(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indication of Forced swith ring port.
+ none - none
+ east - east ring port
+ west - west ring port
+ both - both ring port"
+ ::= { ubiErpsSwitchEntry 19 }
+
+
+ ubiErpsSwitchManualSwitch OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ east(2),
+ west(3),
+ both(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indication of Manual swith ring port.
+ none - none
+ east - east ring port
+ west - west ring port
+ both - both ring port"
+ ::= { ubiErpsSwitchEntry 20 }
+
+
+ ubiErpsSwitchClear OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ east(2),
+ west(3),
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Clear Forced/Manual swith."
+ ::= { ubiErpsSwitchEntry 21 }
+
+ ubiErpsSwitchCurrentState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ init(1),
+ idle(2),
+ protection(3),
+ manual_switch(4),
+ forced_switch(5),
+ pending(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Informaiont of ERPS current state.
+ init(1)
+ - Initialize State machine: One of ring ports is blocked.
+ idle(2)
+ - Idle state: RPL is blocked and ring ports of others are unblocked.
+ protection(3)
+ - Protection state: When links are failed,
+ RPL is unblocked and ring ports of others are unblocked.
+ manual_switch(4)
+ - Manual switch state: Manually switched port is blocked
+ and ring ports of others are unblocked.
+ forced_switch(5)
+ - Force switch state: Forcedly switched ports are blocked
+ and ring ports of others are unblocked.
+ pending(6)
+ - Pneding state: When status of links changed to 'unfailed',
+ one of them is still unblocked."
+ ::= { ubiErpsSwitchEntry 22 }
+
+
+ ubiErpsSwitchLastEvent OBJECT-TYPE
+ SYNTAX INTEGER {
+ r_aps_nr(1),
+ r_aps_nr_rb(2),
+ r_aps_wtb_running(3),
+ wtb_expires(4),
+ r_aps_wtr_running(5),
+ wtr_expires(6),
+ ms(7),
+ r_aps_ms(8),
+ clear(9),
+ l_clear_sf(10),
+ l_sf(11),
+ r_aps_sf(12),
+ fs(13),
+ r_aps_fs(14),
+ event_flush_req(15)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Last Event of ERPS.
+ r_aps_nr(1) - received R-APS(NR)
+ r_aps_nr_rb(2) - received R-APS(NR/RB)
+ r_aps_wtb_running(3) - WTB is started
+ wtb_espires(4) - WTB is expired
+ r_aps_wtr_running(5) - WTR is started
+ wtr_expires(6) - WTR is expired
+ ms(7) - Manual switched
+ r_aps_ms(8) - rceived R-APS(MS)
+ clear(9) - Clear Pending/MS/FS state
+ l_clear_sf(10) - Local clear SF
+ l_sf(11) - Local SF
+ r_aps_sf(12) - received R-APS(SF)
+ fs(13) - Forced switch
+ r_aps_fs(14) - rceived R-APS(FS)
+ event_flush_req(15) - rceived R-APS(Flush request)"
+ ::= { ubiErpsSwitchEntry 23 }
+
+ ubiErpsSwitchSuppressEast OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Suppress trasmission R-APS to east ring port."
+ ::= { ubiErpsSwitchEntry 24 }
+
+ ubiErpsSwitchSuppressWest OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "uppress trasmission R-APS to west ring port"
+ ::= { ubiErpsSwitchEntry 25 }
+
+ ubiErpsSwitchCotNode OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indication of COT node."
+ ::= { ubiErpsSwitchEntry 26 }
+
+ ubiErpsSwitchCotNbrPort OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ east(2),
+ west(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indication of COT neighbor port.
+ none(1) - none
+ east(2) - east ring port
+ west(3) - west ring port"
+ ::= { ubiErpsSwitchEntry 27 }
+
+
+ ubiErpsSwitchMdName OBJECT-TYPE
+ SYNTAX Dot1agCfmMaintDomainName
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "CFM Maintenance Domain Name for inter operation."
+ ::= { ubiErpsSwitchEntry 28 }
+
+
+ ubiErpsSwitchMaName OBJECT-TYPE
+ SYNTAX Dot1agCfmMaintAssocName
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "CFM Maintenance association Name for inter operation."
+ ::= { ubiErpsSwitchEntry 29 }
+
+
+-- *****************************************************************
+-- ubiErpsGlobal
+-- *****************************************************************
+
+ ubiErpsGlobalHoldOff OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "milliseconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Global hold-off timer value."
+ ::= { ubiErpsGlobal 1 }
+
+
+
+-- *****************************************************************
+-- ubiErpsNotificationEnables
+-- *****************************************************************
+
+ ubiErpsRingStateChangeEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable Notificaion of ERPS State Change."
+ ::= { ubiErpsNotificationEnables 1 }
+
+ ubiErpsRingEastIfStateChangeEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable Notificaiont of East Port Status Change."
+ ::= { ubiErpsNotificationEnables 2 }
+
+ ubiErpsRingWestIfStateChangeEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable Notificaiont of East Port Status Change."
+ ::= { ubiErpsNotificationEnables 3 }
+
+
+
+-- ***********************************************************
+-- ubiIfErpsTable
+-- ***********************************************************
+
+ ubiIfErpsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF UbiIfErpsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of ERPS information on interface."
+ ::= { ubiErpsMIBObjects 6 }
+
+
+ ubiIfErpsEntry OBJECT-TYPE
+ SYNTAX UbiIfErpsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of ERPS information on interface."
+ INDEX { ifIndex }
+ ::= { ubiIfErpsTable 1 }
+
+
+ UbiIfErpsEntry ::= SEQUENCE
+ {
+ ubiIfErpsAggMinLink Integer32
+ }
+
+ ubiIfErpsAggMinLink OBJECT-TYPE
+ SYNTAX Integer32 (1..8)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Minmum Link count to activate Port-channel in ERPS.
+ - To activate Port-channel, actived members of port-channel
+ must be minmum link count at least."
+ ::= { ubiIfErpsEntry 1 }
+
+
+
+-- *****************************************************************
+-- ubiErpsMIBConformance
+-- *****************************************************************
+
+-- Conformance Information
+ubiErpsMIBCompliances OBJECT IDENTIFIER ::= { ubiErpsMIBConformance 1 }
+ubiErpsMIBGroups OBJECT IDENTIFIER ::= { ubiErpsMIBConformance 2 }
+
+
+-- compliance statements
+
+ ubiErpsMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for VTP implementations."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ ubiErpsBaseGroup
+ }
+ ::= { ubiErpsMIBCompliances 1 }
+
+-- units of conformance
+
+ ubiErpsBaseGroup OBJECT-GROUP
+ OBJECTS {
+ }
+ STATUS current
+ DESCRIPTION
+ ""
+ ::= { ubiErpsMIBGroups 1 }
+END
+
+
+
+
|