diff options
Diffstat (limited to 'MIBS/transition/TN-RFC2544-MIB')
| -rw-r--r-- | MIBS/transition/TN-RFC2544-MIB | 637 |
1 files changed, 637 insertions, 0 deletions
diff --git a/MIBS/transition/TN-RFC2544-MIB b/MIBS/transition/TN-RFC2544-MIB new file mode 100644 index 0000000..328813e --- /dev/null +++ b/MIBS/transition/TN-RFC2544-MIB @@ -0,0 +1,637 @@ +-- ***************************************************************** +-- TN-RFC2544-MIB.smi: Transition Networks RFC2544 MIB. +-- +-- Copyright (c) 2015 by Transition Networks, Inc. +-- All rights reserved. +-- +-- ***************************************************************** + +TN-RFC2544-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI + DisplayString, RowStatus, MacAddress FROM SNMPv2-TC + tnProducts FROM TRANSITION-SMI + ; + +tnRFC2544 MODULE-IDENTITY + LAST-UPDATED "201506040000Z" + ORGANIZATION "Transition Networks, Inc." + CONTACT-INFO + " Transition Networks + Technical Support + 10900 Red Circle Drive + Minnetonka, MN 55343 USA + Tel: +1-800-526-9267 + + E-mail: techsupport@transition.com" + DESCRIPTION + "The MIB provides functionalities for RFC 2544 Performance Test Commands." + REVISION "201506040000Z" + DESCRIPTION + "Initial Revision of this module" + REVISION "201507140000Z" + DESCRIPTION + "Corrections to tnRFC2544ConfigCommonParamTestsToRunMask and + tnRFC2544ReportStatus" + REVISION "201507210000Z" + DESCRIPTION + "Correction to tnRFC2544ConfigCommonParamDMAC" + REVISION "201507240000Z" + DESCRIPTION + "Added tnRFC2544ConfigCommonRowStatus" + ::= { tnProducts 153 } + +-- ---------------------------------------------------- +-- ---------------------------------------------------- +-- tnRFC2544ProfileTable +-- ---------------------------------------------------- +-- ---------------------------------------------------- + +tnRFC2544ProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnRFC2544ProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to maintain the RFC2544 Profile Entries." + ::= { tnRFC2544 1 } + +tnRFC2544ProfileEntry OBJECT-TYPE + SYNTAX TnRFC2544ProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entries in this table correspond to the RFC2544 Profile Entries." + INDEX { tnRFC2544ProfileIndex } + ::= { tnRFC2544ProfileTable 1 } + +TnRFC2544ProfileEntry ::= + SEQUENCE { + tnRFC2544ProfileName DisplayString, + tnRFC2544ProfileDescription DisplayString + } + +tnRFC2544ProfileName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name, ASCII range 33-126, of this table." + ::= { tnRFC2544ProfileEntry 1 } + +tnRFC2544ProfileDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..127)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The description of this table." + ::= { tnRFC2544ProfileEntry 2 } + +-- ---------------------------------------------------- +-- ---------------------------------------------------- +-- tnRFC2544ConfigCommonParamTable +-- ---------------------------------------------------- +-- ---------------------------------------------------- + + +tnRFC2544ConfigCommonParamTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnRFC2544ConfigCommonParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to maintain the RFC2544 Profile Configuration Common Parameters Entries." + ::= { tnRFC2544 2 } + +tnRFC2544ConfigCommonParamEntry OBJECT-TYPE + SYNTAX TnRFC2544ConfigCommonParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entries in this table correspond to the RFC2544 Profile Configuration Common Parameters Entries." + INDEX { tnRFC2544ConfigCommonParamIndex } + ::= { tnRFC2544ConfigCommonParamTable 1 } + +TnRFC2544ConfigCommonParamEntry ::= + SEQUENCE { + tnRFC2544ConfigCommonParamName DisplayString, + tnRFC2544ConfigCommonParamDescription DisplayString, + tnRFC2544ConfigCommonParamMEGLevel Integer32, + tnRFC2544ConfigCommonParamEgressPort Integer32, + tnRFC2544ConfigCommonParamSequenceNumberCheck INTEGER, + tnRFC2544ConfigCommonParamDwellTime Integer32, + tnRFC2544ConfigCommonParamType INTEGER, + tnRFC2544ConfigCommonParamVLANID Integer32, + tnRFC2544ConfigCommonParamPCP Integer32, + tnRFC2544ConfigCommonParamDEI Integer32, + tnRFC2544ConfigCommonParamDMAC MacAddress, + tnRFC2544ConfigCommonParamFrameSizeMask BITS, + tnRFC2544ConfigCommonParamTestsToRunMask BITS, + tnRFC2544ConfigCommonRowStatus INTEGER + } + + +tnRFC2544ConfigCommonParamName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name, ASCII range 33-126, of this table." + ::= { tnRFC2544ConfigCommonParamEntry 1 } + + +tnRFC2544ConfigCommonParamDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..127)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The description of this table." + ::= { tnRFC2544ConfigCommonParamEntry 2 } + +tnRFC2544ConfigCommonParamMEGLevel OBJECT-TYPE + SYNTAX Integer32 (1..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "MEG Level of this table." + ::= { tnRFC2544ConfigCommonParamEntry 3 } + +tnRFC2544ConfigCommonParamEgressPort OBJECT-TYPE + SYNTAX Integer32 (1..6) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Egress Port of this table." + ::= { tnRFC2544ConfigCommonParamEntry 4 } + +tnRFC2544ConfigCommonParamSequenceNumberCheck OBJECT-TYPE + SYNTAX INTEGER{ + disable (0), + enable (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sequence Number Check disable/enable of this table." + ::= { tnRFC2544ConfigCommonParamEntry 5 } + +tnRFC2544ConfigCommonParamDwellTime OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Dwell Time, in seconds, of this table." + ::= { tnRFC2544ConfigCommonParamEntry 6 } + +tnRFC2544ConfigCommonParamType OBJECT-TYPE + SYNTAX INTEGER{ + portDownMEP (0), + vlanBasedDownMEP (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Type of this table." + ::= { tnRFC2544ConfigCommonParamEntry 7 } + +tnRFC2544ConfigCommonParamVLANID OBJECT-TYPE + SYNTAX Integer32 (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "VLAN ID of this table." + ::= { tnRFC2544ConfigCommonParamEntry 8 } + +tnRFC2544ConfigCommonParamPCP OBJECT-TYPE + SYNTAX Integer32 (1..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "PCP of this table." + ::= { tnRFC2544ConfigCommonParamEntry 9 } + +tnRFC2544ConfigCommonParamDEI OBJECT-TYPE + SYNTAX Integer32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DEI of this table." + ::= { tnRFC2544ConfigCommonParamEntry 10 } + +tnRFC2544ConfigCommonParamDMAC OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DMAC, 00-00-00-00-00-00 formatted, of this table." + ::= { tnRFC2544ConfigCommonParamEntry 11 } + +tnRFC2544ConfigCommonParamFrameSizeMask OBJECT-TYPE + SYNTAX BITS { + frameSize64(0), + frameSize128(1), + frameSize256(2), + frameSize512(3), + frameSize1024(4), + frameSize1280(5), + frameSize1518(6), + frameSize2000(7), + frameSize9600(8) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Frame Size Mask of this table. + Bit 0 - 64 byte frames enabled if set to 1. + Bit 1 - 128 byte frames enabled if set to 1. + Bit 2 - 256 byte frames enabled if set to 1. + Bit 3 - 512 byte frames enabled if set to 1. + Bit 4 - 1024 byte frames enabled if set to 1. + Bit 5 - 1280 byte frames enabled if set to 1. + Bit 6 - 1518 byte frames enabled if set to 1. + Bit 7 - 2000 byte frames enabled if set to 1. + Bit 8 - 9600 byte frames enabled if set to 1. + " + ::= { tnRFC2544ConfigCommonParamEntry 12 } + +tnRFC2544ConfigCommonParamTestsToRunMask OBJECT-TYPE + SYNTAX BITS { + throughputTest(0), + latencyTest(1), + frameLossTest(2), + backToBackTest(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Tests To Run Mask of this table. + Bit 0 - Throughput Test enabled if set to 1. + Bit 1 - Latency Test enabled if set to 1. + Bit 2 - Frame Loss Test enabled if set to 1. + Bit 3 - Back To Back Test enabled if set to 1. + " + ::= { tnRFC2544ConfigCommonParamEntry 13 } + +tnRFC2544ConfigCommonRowStatus OBJECT-TYPE + SYNTAX INTEGER { + noAction (0), + create (1), + delete (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " - 'noAction', Do nothing. + + - 'create', create a profile. + + - 'delete', delete a profile." + + ::= { tnRFC2544ConfigCommonParamEntry 14 } + + + +-- ---------------------------------------------------- +-- ---------------------------------------------------- +-- tnRFC2544ConfigThroughputTestParamTable +-- ---------------------------------------------------- +-- ---------------------------------------------------- + + +tnRFC2544ConfigThroughputTestParamTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnRFC2544ConfigThroughputTestParamEntry + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This table is used to maintain the RFC2544 Profile Config Throughput Test Parameters Entries." + ::= { tnRFC2544 3 } + +tnRFC2544ConfigThroughputTestParamEntry OBJECT-TYPE + SYNTAX TnRFC2544ConfigThroughputTestParamEntry + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Entries in this table correspond to the RFC2544 Profile Config Throughput Test Parameters Entries." + INDEX { tnRFC2544ConfigThroughputTestParamIndex } + ::= { tnRFC2544ConfigThroughputTestParamTable 1 } + +TnRFC2544ConfigThroughputTestParamEntry ::= + SEQUENCE { + tnRFC2544ConfigThroughputTestParamTrialDuration Integer32, + tnRFC2544ConfigThroughputTestParamMinRate Integer32, + tnRFC2544ConfigThroughputTestParamMaxRate Integer32, + tnRFC2544ConfigThroughputTestParamAccuracy Integer32, + tnRFC2544ConfigThroughputTestParamAllowedFrameLoss Integer32 + } + +tnRFC2544ConfigThroughputTestParamTrialDuration OBJECT-TYPE + SYNTAX Integer32 (1..1800) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Trial Duration, in seconds, of this table." + ::= { tnRFC2544ConfigThroughputTestParamEntry 1 } + +tnRFC2544ConfigThroughputTestParamMinRate OBJECT-TYPE + SYNTAX Integer32 (1..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Minimum Rate, in permille, of this table." + ::= { tnRFC2544ConfigThroughputTestParamEntry 2 } + +tnRFC2544ConfigThroughputTestParamMaxRate OBJECT-TYPE + SYNTAX Integer32 (1..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum Rate, in permille, of this table." + ::= { tnRFC2544ConfigThroughputTestParamEntry 3 } + +tnRFC2544ConfigThroughputTestParamAccuracy OBJECT-TYPE + SYNTAX Integer32 (1..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Accuracy, in permille, of this table." + ::= { tnRFC2544ConfigThroughputTestParamEntry 4 } + +tnRFC2544ConfigThroughputTestParamAllowedFrameLoss OBJECT-TYPE + SYNTAX Integer32 (0..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allowed Frame Loss, in permille, of this table." + ::= { tnRFC2544ConfigThroughputTestParamEntry 5 } + +-- ---------------------------------------------------- +-- ---------------------------------------------------- +-- tnRFC2544ConfigLatencyTestParamTable +-- ---------------------------------------------------- +-- ---------------------------------------------------- + + +tnRFC2544ConfigLatencyTestParamTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnRFC2544ConfigLatencyTestParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to maintain the RFC2544 Profile Config Latency Test Parameters Entries." + ::= { tnRFC2544 4 } + +tnRFC2544ConfigLatencyTestParamEntry OBJECT-TYPE + SYNTAX TnRFC2544ConfigLatencyTestParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entries in this table correspond to the RFC2544 Profile Config Latency Test Parameters Entries." + INDEX { tnRFC2544ConfigLatencyTestParamIndex } + ::= { tnRFC2544ConfigLatencyTestParamTable 1 } + +TnRFC2544ConfigLatencyTestParamEntry ::= + SEQUENCE { + tnRFC2544ConfigLatencyTestParamTrialDuration Integer32, + tnRFC2544ConfigLatencyTestParamDelayMeasurementInterval Integer32, + tnRFC2544ConfigLatencyTestParamAllowedFrameLoss Integer32 + } + +tnRFC2544ConfigLatencyTestParamTrialDuration OBJECT-TYPE + SYNTAX Integer32 (10..1800) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Trial Duration, in seconds, of this table." + ::= { tnRFC2544ConfigLatencyTestParamEntry 1 } + +tnRFC2544ConfigLatencyTestParamDelayMeasurementInterval OBJECT-TYPE + SYNTAX Integer32 (1..60) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Delay Measurement Interval, in seconds, of this table." + ::= { tnRFC2544ConfigLatencyTestParamEntry 2 } + +tnRFC2544ConfigLatencyTestParamAllowedFrameLoss OBJECT-TYPE + SYNTAX Integer32 (0..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allowed Frame Loss, in permille, of this table." + ::= { tnRFC2544ConfigLatencyTestParamEntry 3 } + +-- ---------------------------------------------------- +-- ---------------------------------------------------- +-- tnRFC2544ConfigFrameLossTestParamTable +-- ---------------------------------------------------- +-- ---------------------------------------------------- + +tnRFC2544ConfigFrameLossTestParamTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnRFC2544ConfigFrameLossTestParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to maintain the RFC2544 Profile Config Frame Loss Test Parameters Entries." + ::= { tnRFC2544 5 } + +tnRFC2544ConfigFrameLossTestParamEntry OBJECT-TYPE + SYNTAX TnRFC2544ConfigFrameLossTestParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entries in this table correspond to the RFC2544 Profile Config Frame Loss Test Parameters Entries." + INDEX { tnRFC2544ConfigFrameLossTestParamIndex } + ::= { tnRFC2544ConfigFrameLossTestParamTable 1 } + +TnRFC2544ConfigFrameLossTestParamEntry ::= + SEQUENCE { + tnRFC2544ConfigFrameLossTestParamTrialDuration Integer32, + tnRFC2544ConfigFrameLossTestParamMinRate Integer32, + tnRFC2544ConfigFrameLossTestParamMaxRate Integer32, + tnRFC2544ConfigFrameLossTestParamRateStep Integer32 + } + +tnRFC2544ConfigFrameLossTestParamTrialDuration OBJECT-TYPE + SYNTAX Integer32 (1..1800) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Trial Duration, in seconds, of this table." + ::= { tnRFC2544ConfigFrameLossTestParamEntry 1 } + +tnRFC2544ConfigFrameLossTestParamMinRate OBJECT-TYPE + SYNTAX Integer32 (1..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Minimum Rate, in permille, of this table." + ::= { tnRFC2544ConfigFrameLossTestParamEntry 2 } + +tnRFC2544ConfigFrameLossTestParamMaxRate OBJECT-TYPE + SYNTAX Integer32 (1..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum Rate, in permille, of this table." + ::= { tnRFC2544ConfigFrameLossTestParamEntry 3 } + +tnRFC2544ConfigFrameLossTestParamRateStep OBJECT-TYPE + SYNTAX Integer32 (1..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Rate Step, in permille, of this table." + ::= { tnRFC2544ConfigFrameLossTestParamEntry 4 } + +-- ---------------------------------------------------- +-- ---------------------------------------------------- +-- tnRFC2544ConfigBackToBackTestParamTable +-- ---------------------------------------------------- +-- ---------------------------------------------------- + + +tnRFC2544ConfigBackToBackTestParamTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnRFC2544ConfigBackToBackTestParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to maintain the RFC2544 Profile Config Back To Back Test Param Entries." + ::= { tnRFC2544 6 } + +tnRFC2544ConfigBackToBackTestParamEntry OBJECT-TYPE + SYNTAX TnRFC2544ConfigBackToBackTestParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entries in this table correspond to the RFC2544 Profile Configuration Back To Back Test Parameters Entries." + INDEX { tnRFC2544ConfigBackToBackTestParamTrialDuration } + ::= { tnRFC2544ConfigBackToBackTestParamTable 1 } + +TnRFC2544ConfigBackToBackTestParamEntry ::= + SEQUENCE { + tnRFC2544ConfigBackToBackTestParamTrialDuration Integer32, + tnRFC2544ConfigBackToBackTestParamTrialCount Integer32 + } + +tnRFC2544ConfigBackToBackTestParamTrialDuration OBJECT-TYPE + SYNTAX Integer32 (100..10000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Trial Duration, in seconds, of this table." + ::= { tnRFC2544ConfigBackToBackTestParamEntry 1 } + +tnRFC2544ConfigBackToBackTestParamTrialCount OBJECT-TYPE + SYNTAX Integer32 (1..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Trial count of this table." + ::= { tnRFC2544ConfigBackToBackTestParamEntry 2 } + +-- ---------------------------------------------------- +-- ---------------------------------------------------- +-- tnRFC2544ReportTable +-- ---------------------------------------------------- +-- ---------------------------------------------------- + +tnRFC2544ReportTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnRFC2544ReportEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to maintain the RFC2544 Profile Config Back To Back Test Param Entries." + ::= { tnRFC2544 7 } + +tnRFC2544ReportEntry OBJECT-TYPE + SYNTAX TnRFC2544ReportEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entries in this table correspond to the RFC2544 Profile Configuration Back To Back Test Parameters Entries." + INDEX { tnRFC2544ReportIndex } + ::= { tnRFC2544ReportTable 1 } + +TnRFC2544ReportEntry ::= + SEQUENCE { + tnRFC2544ReportName DisplayString, + tnRFC2544ReportDescr DisplayString, + tnRFC2544ProfileName DisplayString, + tnRFC2544CreateTime DisplayString, + tnRFC2544ReportStatus INTEGER, + tnRFC2544DownloadTFTPServer DisplayString, + tnRFC2544ReportAction INTEGER + } + +tnRFC2544ReportName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Name of the report." + ::= { tnRFC2544ReportEntry 1 } + +tnRFC2544ReportDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Report description." + ::= { tnRFC2544ReportEntry 2 } + +tnRFC2544ProfileName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..128)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Name of profile." + ::= { tnRFC2544ReportEntry 3 } + +tnRFC2544CreateTime OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..128)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Name of profile." + ::= { tnRFC2544ReportEntry 4 } + +tnRFC2544ReportStatus OBJECT-TYPE + SYNTAX INTEGER { inactive (0), executing (1), cancelling (2), cancelled (3), passed (4), failed (5)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Report status." + ::= { tnRFC2544ReportEntry 5 } + +tnRFC2544DownloadTFTPServer OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "TFTP server URL on the form tftp://server[:port]/path-to-file + to place the report when a save report is next requested via this MIB. + This value is set to zero length when no address has been + specified. The report name will be used as the filename" + ::= { tnRFC2544ReportEntry 6 } + +tnRFC2544ReportAction OBJECT-TYPE + SYNTAX INTEGER{ + noAction (0), + createAndRun (1), + cancel (2), + delete (3), + save (4) + } + MAX-ACCESS read-create STATUS current + DESCRIPTION + " - 'noAction', Do nothing. + + - 'createAndRun', create a report and start execution of the test. + + - 'cancel', cancel a test that is running. + + - 'delete', delete a test. + + - 'save', save to a tftp server." + + ::= { tnRFC2544ReportEntry 7 } + +END + |