diff options
Diffstat (limited to 'MIBS/tplink/TPLINK-IPV6ADDR-MIB')
| -rw-r--r-- | MIBS/tplink/TPLINK-IPV6ADDR-MIB | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/MIBS/tplink/TPLINK-IPV6ADDR-MIB b/MIBS/tplink/TPLINK-IPV6ADDR-MIB new file mode 100644 index 0000000..f7b3503 --- /dev/null +++ b/MIBS/tplink/TPLINK-IPV6ADDR-MIB @@ -0,0 +1,276 @@ +TPLINK-IPV6ADDR-MIB DEFINITIONS ::= BEGIN
+ IMPORTS
+ RowStatus, DisplayString
+ FROM SNMPv2-TC
+ tplinkMgmt
+ FROM TPLINK-MIB
+ OBJECT-TYPE,IpAddress
+ FROM SNMPv2-SMI
+ InetAddress, InetAddressType
+ FROM INET-ADDRESS-MIB;
+
+ tplinkIpv6AddrMIB MODULE-IDENTITY
+ LAST-UPDATED "201512130930Z"
+ ORGANIZATION "TPLINK"
+ CONTACT-INFO "www.tplink.com"
+ DESCRIPTION "Private MIB for IPv6 address configuration."
+ REVISION "201212130930Z"
+ DESCRIPTION
+ "Initial version of this MIB module."
+ ::= { tplinkMgmt 50 }
+
+ tplinkIpv6AddrMIBObjects OBJECT IDENTIFIER ::= { tplinkIpv6AddrMIB 1 }
+ tplinkIpv6RoutingConfig OBJECT IDENTIFIER ::= { tplinkIpv6AddrMIB 2 }
+ tplinkIpv6AddrNotifications OBJECT IDENTIFIER ::= { tplinkIpv6AddrMIB 3 }
+
+ ipv6ParaConfigAddrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Ipv6ParaConfigAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of address information is relevant to the
+ switch's IPv6 addresses."
+ ::= { tplinkIpv6AddrMIBObjects 1 }
+ ipv6ParaConfigAddrEntry OBJECT-TYPE
+ SYNTAX Ipv6ParaConfigAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define the IPv6 address information."
+ INDEX
+ {
+ ipv6ParaConfigIfIndex,
+ ipv6ParaConfigAddrType,
+ ipv6ParaConfigSourceType,
+ ipv6ParaConfigAddress
+ }
+ ::= { ipv6ParaConfigAddrTable 1 }
+
+ Ipv6ParaConfigAddrEntry ::=
+ SEQUENCE
+ {
+ ipv6ParaConfigIfIndex INTEGER,
+ ipv6ParaConfigIfDescription DisplayString,
+ ipv6ParaConfigAddrType InetAddressType,
+ ipv6ParaConfigAddress InetAddress,
+ ipv6ParaConfigPrefixLength INTEGER(1..128),
+ ipv6ParaConfigSourceType INTEGER,
+ ipv6ParaConfigRowStatus RowStatus
+ }
+
+ ipv6ParaConfigIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IfIndex of the interface"
+ ::= { ipv6ParaConfigAddrEntry 1 }
+
+ ipv6ParaConfigIfDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The description of the interface."
+ ::= { ipv6ParaConfigAddrEntry 2 }
+
+ ipv6ParaConfigAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address type of the switch. The value must be ipv6."
+ ::= { ipv6ParaConfigAddrEntry 3 }
+
+
+ ipv6ParaConfigAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address of the switch."
+ ::= { ipv6ParaConfigAddrEntry 4 }
+
+ ipv6ParaConfigPrefixLength OBJECT-TYPE
+ SYNTAX INTEGER(1..128)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The length of the prefix (in bits) associated with
+ the IPv6 address of the switch."
+ ::= { ipv6ParaConfigAddrEntry 5 }
+
+ ipv6ParaConfigSourceType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ assignedIp(1),
+ assignedEUI64Ip(2),
+ assignedLinklocalIp(3),
+ autoIp(4),
+ dhcpv6(5),
+ negotiate(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate the type of source of IPv6 address.
+ The value can be one of following:
+ 'assignedIp':
+ Assigned global/site-local IPv6 address;
+ 'assignedEUI64Ip':
+ Assigned global/site-local IPv6 address
+ by using EUI-64 interface identifier;
+ 'assignedLinklocalIp':
+ Assigned link-local IPv6 address.
+ 'autoIp':
+ Auto generated IPv6 address as a result
+ of non-linklocal anycast/unicast address
+ configuration;
+ 'dhcpv6':
+ Assigned IPv6 address through DHCPv6
+ protocol;
+ 'negotiate':
+ Assigned IPv6 address through negotiation;"
+ ::= { ipv6ParaConfigAddrEntry 6 }
+
+ ipv6ParaConfigRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "the following values are states:
+ these values may be used as follow:
+
+ active(1),if the entry is being used.
+ notInService(2),destory the entry.
+ notReady(3),destory the entry.
+ createAndGo(4),not being used
+ createAndWait(5),creat a new entry
+ destroy(6),destory the entry.
+
+ When you create a new user,the default password
+ is admin."
+ ::= { ipv6ParaConfigAddrEntry 7 }
+
+ ipv6ParaConfigCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Ipv6ParaConfigCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of configuration information is relevant to the
+ switch's IPv6 addresses."
+ ::= { tplinkIpv6AddrMIBObjects 2 }
+
+ ipv6ParaConfigCfgEntry OBJECT-TYPE
+ SYNTAX Ipv6ParaConfigCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define the IPv6 address information."
+ INDEX
+ {
+ ipv6ParaConfigCfgIfIndex
+ }
+ ::= { ipv6ParaConfigCfgTable 1 }
+
+ Ipv6ParaConfigCfgEntry ::=
+ SEQUENCE
+ {
+ ipv6ParaConfigCfgIfIndex INTEGER,
+ ipv6ParaConfigCfgIfDescription DisplayString,
+ ipv6ParaConfigAutoLinkLocalEnable INTEGER,
+ ipv6ParaConfigDhcpEnable INTEGER,
+ ipv6ParaConfigNegotiateEnable INTEGER,
+ ipv6ParaConfigIPv6Enable INTEGER
+ }
+
+ ipv6ParaConfigCfgIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IfIndex of the interface"
+ ::= { ipv6ParaConfigCfgEntry 1 }
+
+ ipv6ParaConfigCfgIfDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The description of the interface."
+ ::= { ipv6ParaConfigCfgEntry 2 }
+
+ ipv6ParaConfigAutoLinkLocalEnable OBJECT-TYPE
+ SYNTAX INTEGER{
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "0. disable
+ 1. enable
+ Enable/Disable IPv6 link-local address auto configuration mode."
+ ::= { ipv6ParaConfigCfgEntry 3 }
+
+ ipv6ParaConfigDhcpEnable OBJECT-TYPE
+ SYNTAX INTEGER{
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "0. disable
+ 1. enable
+ Enable/Disable IPv6 global address auto configuration via DHCPv6 Server."
+ ::= { ipv6ParaConfigCfgEntry 4 }
+
+ ipv6ParaConfigNegotiateEnable OBJECT-TYPE
+ SYNTAX INTEGER{
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "0. disable
+ 1. enable
+ Enable/Disable IPv6 global address auto configuration via RA message."
+ ::= { ipv6ParaConfigCfgEntry 5 }
+
+ ipv6ParaConfigIPv6Enable OBJECT-TYPE
+ SYNTAX INTEGER{
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "0. disable
+ 1. enable
+ Enable/Disable IPv6 function on the interface of switch."
+ ::= { ipv6ParaConfigCfgEntry 6 }
+
+ ipv6GatewayConfig OBJECT IDENTIFIER ::= {tplinkIpv6AddrMIBObjects 3}
+ ipv6Gateway OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(46))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The gateway of the ipv6 interface. Set '0' to delete the gateway."
+ ::= { ipv6GatewayConfig 1 }
+
+ tpIpv6Routing OBJECT-TYPE
+ SYNTAX INTEGER{
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "0. disable
+ 1. enable"
+ ::= { tplinkIpv6RoutingConfig 1 }
+
+END
|