diff options
Diffstat (limited to 'MIBS/tplink/TPLINK-DDMSTATUS-MIB')
| -rw-r--r-- | MIBS/tplink/TPLINK-DDMSTATUS-MIB | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/MIBS/tplink/TPLINK-DDMSTATUS-MIB b/MIBS/tplink/TPLINK-DDMSTATUS-MIB new file mode 100644 index 0000000..ce97198 --- /dev/null +++ b/MIBS/tplink/TPLINK-DDMSTATUS-MIB @@ -0,0 +1,126 @@ + TPLINK-DDMSTATUS-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE
+ FROM SNMPv2-SMI
+ ifIndex
+ FROM RFC1213-MIB
+ DisplayString
+ FROM SNMPv2-TC
+ tplinkDdmManageMIBObjects
+ FROM TPLINK-DDMMANAGE-MIB;
+
+ ddmStatus MODULE-IDENTITY
+ LAST-UPDATED "200908270000Z"
+ ORGANIZATION "TPLINK"
+ CONTACT-INFO "www.tplink.com"
+ DESCRIPTION "The view of DDM status."
+ REVISION "200908270000Z"
+ DESCRIPTION "Initial version of this MIB module."
+ ::= { tplinkDdmManageMIBObjects 7 }
+
+ ddmStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DDMStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that is used to view the DDM status for specific ports on the Switch."
+ ::= { ddmStatus 1 }
+
+ ddmStatusEntry OBJECT-TYPE
+ SYNTAX DDMStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information for every port."
+ INDEX { ifIndex }
+ ::= { ddmStatusTable 1 }
+
+ DDMStatusEntry ::=
+ SEQUENCE
+ {
+ ddmStatusPort DisplayString(SIZE(0..255)),
+ ddmStatusTemperature DisplayString(SIZE(0..30)),
+ ddmStatusVoltage DisplayString(SIZE(0..30)),
+ ddmStatusBiasCurrent DisplayString(SIZE(0..30)),
+ ddmStatusTxPow DisplayString(SIZE(0..30)),
+ ddmStatusRxPow DisplayString(SIZE(0..30)),
+ ddmStatusDataReady DisplayString(SIZE(0..30)),
+ ddmStatusLossSignal DisplayString(SIZE(0..30)),
+ ddmStatusTxFault DisplayString(SIZE(0..30))
+ }
+
+ ddmStatusPort OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the port number."
+ ::= { ddmStatusEntry 1 }
+
+ ddmStatusTemperature OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the temperature of the port."
+ ::= { ddmStatusEntry 2 }
+
+ ddmStatusVoltage OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the voltage of the port."
+ ::= { ddmStatusEntry 3 }
+
+ ddmStatusBiasCurrent OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the bias current of the port."
+ ::= { ddmStatusEntry 4 }
+
+ ddmStatusTxPow OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the tx power of the port."
+ ::= { ddmStatusEntry 5 }
+
+ ddmStatusRxPow OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the rx power of the port."
+ ::= { ddmStatusEntry 6 }
+
+ ddmStatusDataReady OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether SFP is operational or not."
+ ::= { ddmStatusEntry 7 }
+
+ ddmStatusLossSignal OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether local SFP reports signal loss or not."
+ ::= { ddmStatusEntry 8 }
+
+ ddmStatusTxFault OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..30))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether remote SFP reports signal loss or not."
+ ::= { ddmStatusEntry 9 }
+
+END
+
\ No newline at end of file |