diff options
Diffstat (limited to 'MIBS/telco-systems/binox/PRVT-TWAMP-MIB')
| -rw-r--r-- | MIBS/telco-systems/binox/PRVT-TWAMP-MIB | 473 |
1 files changed, 473 insertions, 0 deletions
diff --git a/MIBS/telco-systems/binox/PRVT-TWAMP-MIB b/MIBS/telco-systems/binox/PRVT-TWAMP-MIB new file mode 100644 index 0000000..244c039 --- /dev/null +++ b/MIBS/telco-systems/binox/PRVT-TWAMP-MIB @@ -0,0 +1,473 @@ +-- ********************************************************************* +-- ** +-- ** BATM Advanced Communications. +-- ** +-- ********************************************************************* +-- ** Filename: PRVT-TWAMP-MIB.mib +-- ** Project: T-Metro Switches. +-- ** Purpose: Private MIB +-- ********************************************************************* +-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved. +-- WARNING: +-- +-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: +-- +-- This file is the property of BATM Advanced Communications and contains +-- proprietary and confidential information. This file is made +-- available to authorized BATM customers on the express +-- condition that neither it, nor any of the information contained +-- therein, shall be disclosed to third parties or be used for any +-- purpose other than to replace, modify or upgrade firmware and/or +-- software components of BATM manufactured equipment within the +-- authorized customer's network, and that such transfer be +-- completed in accordance with the instructions provided by +-- BATM. Any other use is strictly prohibited. +-- +-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED +-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE +-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES +-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- +-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER +-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS +-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR +-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY +-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE. +-- +-- ---------------------------------------------------------------------------- + +PRVT-TWAMP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + switch + FROM PRVT-SWITCH-MIB + Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, + NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 + FROM SNMPv2-SMI + MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue + FROM SNMPv2-TC; + +prvtTwampMIB MODULE-IDENTITY + LAST-UPDATED "201405160000Z" + ORGANIZATION + "BATM Advanced Communication" + CONTACT-INFO + "BATM/Telco Systems Support team + Email: + For North America: techsupport@telco.com + For North Europe: support@batm.de, info@batm.de + For the rest of the world: techsupport@telco.com" + DESCRIPTION + "This MIB provides the extended capability of controlling and + provisioning of TWAMP tests." + REVISION "201005270000Z" + DESCRIPTION + "Initial version." + ::= { switch 240 } + + +PrvtTwampTestNameType ::= TEXTUAL-CONVENTION + DISPLAY-HINT "32a" + STATUS current + DESCRIPTION + "TWAMP test name type (1..32 characters)." + SYNTAX OCTET STRING (SIZE(1..32)) + +PrvtTwampDecimalPercent ::= TEXTUAL-CONVENTION + DISPLAY-HINT "3d.2d" + STATUS current + DESCRIPTION + "A percentage value in decimal format." + SYNTAX OCTET STRING (SIZE(1..10)) + +prvtTwampNotifications OBJECT IDENTIFIER + ::= { prvtTwampMIB 0 } + +prvtTwampObjects OBJECT IDENTIFIER + ::= { prvtTwampMIB 1 } + +prvtTwampTest OBJECT IDENTIFIER + ::= { prvtTwampObjects 1 } + +prvtTwampTestTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtTwampTestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains TWAMP tests." + ::= { prvtTwampTest 1 } + +prvtTwampTestEntry OBJECT-TYPE + SYNTAX PrvtTwampTestEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry in prvtTwampTestTable" + INDEX { prvtTwampTestName } + ::= { prvtTwampTestTable 1 } + +PrvtTwampTestEntry ::= SEQUENCE { + prvtTwampTestName PrvtTwampTestNameType, + prvtTwampTestRowStatus RowStatus, + prvtTwampTestServer IpAddress, + prvtTwampTestSessionsCount Integer32, + prvtTwampTestPackets Integer32, + prvtTwampTestTimeout Integer32, + prvtTwampTestDelay Integer32, + prvtTwampTestExecuteNow Integer32 +} + +prvtTwampTestName OBJECT-TYPE + SYNTAX PrvtTwampTestNameType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "TWAMP test name." + ::= { prvtTwampTestEntry 1 } + +prvtTwampTestRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Create/delete entry in prvtTwampTestTable." + ::= { prvtTwampTestEntry 2 } + +prvtTwampTestServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "TWAMP test server ip-address." + ::= { prvtTwampTestEntry 3 } + +prvtTwampTestSessionsCount OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of parallel test sessions." + DEFVAL { 1 } + ::= { prvtTwampTestEntry 4 } + +prvtTwampTestPackets OBJECT-TYPE + SYNTAX Integer32 (10..1000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of packets in parallel sessions." + DEFVAL { 300 } + ::= { prvtTwampTestEntry 5 } + +prvtTwampTestTimeout OBJECT-TYPE + SYNTAX Integer32 (100..10000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The timout interval of test packets (in milliseconds)." + DEFVAL { 900 } + ::= { prvtTwampTestEntry 6 } + +prvtTwampTestDelay OBJECT-TYPE + SYNTAX Integer32 (100..1500) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The delay interval between test packets (in milliseconds)" + DEFVAL { 100 } + ::= { prvtTwampTestEntry 7 } + +prvtTwampTestExecuteNow OBJECT-TYPE + SYNTAX Integer32 (0..2) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "When this object is set to '1', command + self-test execute-now. When this object is set to '2' + the self-test is stopped. Setting the variable to '0' + results in an 'inconsistentValue' error. + Setting it to any other value has no effect. + + When this object is read, the value '0' is returned." + ::= { prvtTwampTestEntry 8 } + +prvtTwampServer OBJECT IDENTIFIER + ::= { prvtTwampObjects 2 } + +prvtTwampServerInnactivity OBJECT-TYPE + SYNTAX Integer32 (1..900) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The server innactivity timeout interval of the TWAMP server (in seconds)." + DEFVAL { 900 } + ::= { prvtTwampServer 2 } + +prvtTwampServerSessionInnactivity OBJECT-TYPE + SYNTAX Integer32 (1..900) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The session innactivity timeout interval of the TWAMP server (in seconds)." + DEFVAL { 900 } + ::= { prvtTwampServer 3 } + +prvtTwampServerMaxSessions OBJECT-TYPE + SYNTAX Integer32 (1..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of controll sessions supported by the TWAMP server." + DEFVAL { 10 } + ::= { prvtTwampServer 4 } + +prvtTwampServerMaxParallelSessions OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of parallel test sessions for each client supperted by the TWAMP server." + DEFVAL { 1 } + ::= { prvtTwampServer 5 } + +prvtTwampServerShutdown OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative state of the TWAMP server." + DEFVAL { true } + ::= { prvtTwampServer 6 } + +prvtTwampClientTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtTwampClientEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains the allowed clients for the TWAMP server." + ::= { prvtTwampServer 7 } + +prvtTwampClientEntry OBJECT-TYPE + SYNTAX PrvtTwampClientEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry in twampClientTable." + INDEX { prvtTwampClientIp } + ::= { prvtTwampClientTable 1 } + +PrvtTwampClientEntry ::= SEQUENCE { + prvtTwampClientIp IpAddress, + prvtTwampClientRowStatus RowStatus +} + +prvtTwampClientIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ip-address of the client." + ::= { prvtTwampClientEntry 1 } + +prvtTwampClientRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "create/delete entry in prvtTwampClientTable" + ::= { prvtTwampClientEntry 2 } + +prvtTwampServerControlSessions OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of current control sessions established on the TWAMP server." + ::= { prvtTwampServer 8 } + +prvtTwampServerTestSessions OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of current test sessions established on the TWAMP server." + ::= { prvtTwampServer 9 } + +prvtTwampTestResult OBJECT IDENTIFIER + ::= { prvtTwampObjects 3 } + +prvtTwampTestResultTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrvtTwampTestResultEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table contains statistics of the executed TWAMP tests." + ::= { prvtTwampTestResult 1 } + +prvtTwampTestResultEntry OBJECT-TYPE + SYNTAX PrvtTwampTestResultEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry in twampTestResultTable" + INDEX { prvtTwampTestId, prvtTwampTestResultName } + ::= { prvtTwampTestResultTable 1 } + +PrvtTwampTestResultEntry ::= SEQUENCE { + prvtTwampTestId Unsigned32, + prvtTwampTestResultName PrvtTwampTestNameType, + prvtTwampTestStartTime Unsigned32, + prvtTwampTestServerAddress IpAddress, + prvtTwampTestSessions Unsigned32, + prvtTwampTestState INTEGER, + prvtTwampTestRtt Counter64, + prvtTwampTestMinRtt Counter64, + prvtTwampTestMaxRtt Counter64, + prvtTwampTestPcktSent Unsigned32, + prvtTwampTestPcktLost Unsigned32, + prvtTwampTestPcktDrop Unsigned32, + prvtTwampTestVariation Counter64, + prvtTwampTestVariationLow PrvtTwampDecimalPercent, + prvtTwampTestVariationMiddle PrvtTwampDecimalPercent, + prvtTwampTestVariationHigh PrvtTwampDecimalPercent +} + +prvtTwampTestId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal ID of the TWAMP test instance." + ::= { prvtTwampTestResultEntry 1 } + +prvtTwampTestResultName OBJECT-TYPE + SYNTAX PrvtTwampTestNameType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TWAMP test name." + ::= { prvtTwampTestResultEntry 2 } + +prvtTwampTestStartTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The start time of the TWAMP test instance." + ::= { prvtTwampTestResultEntry 3 } + +prvtTwampTestServerAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The server ip-address of the TWAMP test instance." + ::= { prvtTwampTestResultEntry 4 } + +prvtTwampTestSessions OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of parallel test sessions of the TWAMP test instance." + DEFVAL { 0 } + ::= { prvtTwampTestResultEntry 5 } + +prvtTwampTestState OBJECT-TYPE + SYNTAX INTEGER { failed(1), running(2), stopped(3), finished(4) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the executed TWAMP test instance." + DEFVAL { 0 } + ::= { prvtTwampTestResultEntry 6 } + +prvtTwampTestRtt OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average round-trip time of the TWAMP test sample." + DEFVAL { 0 } + ::= { prvtTwampTestResultEntry 7 } + +prvtTwampTestMinRtt OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum round-trip time of the TWAMP test sample." + DEFVAL { 0 } + ::= { prvtTwampTestResultEntry 8 } + +prvtTwampTestMaxRtt OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum round-trip time of the TWAMP test sample." + DEFVAL { 0 } + ::= { prvtTwampTestResultEntry 9 } + +prvtTwampTestPcktSent OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of test packets sent for the TWAMP test instance." + DEFVAL { 0 } + ::= { prvtTwampTestResultEntry 10 } + +prvtTwampTestPcktLost OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of lost test packets." + DEFVAL { 0 } + ::= { prvtTwampTestResultEntry 11 } + +prvtTwampTestPcktDrop OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of dropped test packets." + DEFVAL { 0 } + ::= { prvtTwampTestResultEntry 12 } + +prvtTwampTestVariation OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum module variation of the TWAMP test sample" + DEFVAL { 0 } + ::= { prvtTwampTestResultEntry 13 } + +prvtTwampTestVariationLow OBJECT-TYPE + SYNTAX PrvtTwampDecimalPercent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The percent of singletons whose variation is less than 10% of the negated maximum module variation of the sample." + ::= { prvtTwampTestResultEntry 14 } + +prvtTwampTestVariationMiddle OBJECT-TYPE + SYNTAX PrvtTwampDecimalPercent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The percent of singletons whose variation by module is less than 10% of the maximum module variation of the sample." + ::= { prvtTwampTestResultEntry 15 } + +prvtTwampTestVariationHigh OBJECT-TYPE + SYNTAX PrvtTwampDecimalPercent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The percent of singletons whose variation is greater than 10% of the maximum module variation of the sample." + ::= { prvtTwampTestResultEntry 16 } + +END -- end of module PRVT-TWAMP-MIB. |