diff options
Diffstat (limited to 'MIBS/telco-systems/binox/PRVT-MPLS-LDP-MIB')
| -rw-r--r-- | MIBS/telco-systems/binox/PRVT-MPLS-LDP-MIB | 898 |
1 files changed, 898 insertions, 0 deletions
diff --git a/MIBS/telco-systems/binox/PRVT-MPLS-LDP-MIB b/MIBS/telco-systems/binox/PRVT-MPLS-LDP-MIB new file mode 100644 index 0000000..f936c51 --- /dev/null +++ b/MIBS/telco-systems/binox/PRVT-MPLS-LDP-MIB @@ -0,0 +1,898 @@ +-- ********************************************************************* +-- ** +-- ** BATM Advanced Communications. +-- ** +-- ********************************************************************* +-- ** Filename: PRVT-MPLS-LDP-MIB.mib +-- ** Project: T-Metro Switches. +-- ** Purpose: Private MIB +-- ********************************************************************* +-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved. +-- WARNING: +-- +-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: +-- +-- This file is the property of BATM Advanced Communications and contains +-- proprietary and confidential information. This file is made +-- available to authorized BATM customers on the express +-- condition that neither it, nor any of the information contained +-- therein, shall be disclosed to third parties or be used for any +-- purpose other than to replace, modify or upgrade firmware and/or +-- software components of BATM manufactured equipment within the +-- authorized customer's network, and that such transfer be +-- completed in accordance with the instructions provided by +-- BATM. Any other use is strictly prohibited. +-- +-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED +-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE +-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES +-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- +-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER +-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS +-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR +-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY +-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE. +-- +-- ---------------------------------------------------------------------------- + +PRVT-MPLS-LDP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + InetAddressType + FROM INET-ADDRESS-MIB + prvtcrldpPmIndex, prvtcrldpSigIndex + FROM PRVT-CR-LDP-MIB + mpls + FROM PRVT-SWITCH-MIB + Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 + FROM SNMPv2-SMI + RowStatus, TEXTUAL-CONVENTION, TruthValue + FROM SNMPv2-TC; + +prvtMplsLdpMIB MODULE-IDENTITY + LAST-UPDATED "200911260000Z" + ORGANIZATION + "BATM Advanced Communication" + CONTACT-INFO + "BATM/Telco Systems Support team + Email: + For North America: techsupport@telco.com + For North Europe: support@batm.de, info@batm.de + For the rest of the world: techsupport@telco.com" + DESCRIPTION + "This MIB contains managed object definitions for the + 'Multiprotocol Label Switching, Label Distribution + Protocol, LDP'." + REVISION "200911260000Z" + DESCRIPTION + "Created MplsLdpIdentifier TC." + REVISION "200606030000Z" + DESCRIPTION + "Initial version published as part of RFC 3815." + ::= { mpls 1 } + + +MplsRetentionMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The label retention mode which specifies whether + an LSR maintains a label binding for a FEC + learned from a neighbor that is not its next hop + for the FEC. + + If the value is conservative(1) then advertised + label mappings are retained only if they will be + used to forward packets, i.e., if label came from + a valid next hop. + + If the value is liberal(2) then all advertised + label mappings are retained whether they are from + a valid next hop or not." + REFERENCE + "Multiprotocol Label Switching Architecture, + RFC3031. + + LDP Specification, RFC3036, Section 2.6.2." + SYNTAX INTEGER { conservative(1), liberal(2) } + +MplsLdpLabelType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The Layer 2 label types which are defined for MPLS + LDP and/or CR-LDP are generic(1), atm(2), or + frameRelay(3)." + SYNTAX INTEGER { generic(1), atm(2), frameRelay(3) } + +MplsLabelDistributionMethod ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The label distribution method which is also called + the label advertisement mode [RFC3036]. + Each interface on an LSR is configured to operate + in either Downstream Unsolicited or Downstream + on Demand." + REFERENCE + "Multiprotocol Label Switching Architecture, + RFC3031. + + LDP Specification, RFC3036, Section 2.6.3." + SYNTAX INTEGER { downstreamOnDemand(1), + downstreamUnsolicited(2) } + +PrvtMplsLdpIdentifier ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The LDP identifier is used to identify a + Label Switching Router (LSR) label space. + + The format is an ASCII representation of + a string in the form A.B.C.D:S, + where A,B,C,D identify the LSR and must + be a globally unique value, such as a 32-bit + router ID assigned to the LSR, + and S identifies a specific label space + within the LSR." + SYNTAX OCTET STRING (SIZE(10..20)) + +MplsIndexType ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "This is an octet string that can be used as a table + index in cases where a large addressable space is + required such as on an LSR where many applications + may be provisioning labels. + + Note that the string containing the single octet with + the value 0x00 is a reserved value used to represent + special cases. When this TEXTUAL-CONVENTION is used + as the SYNTAX of an object, the DESCRIPTION clause + MUST specify if this special value is valid and if so + what the special meaning is. + + In systems that provide write access to the MPLS-LSR-STD + MIB, mplsIndexType SHOULD be used as a simple multi-digit + integer encoded as an octet string. + No further overloading of the meaning of an index SHOULD + be made. + + In systems that do not offer write access to the MPLS-LSR-STD + MIB, the mplsIndexType may contain implicit formatting that is + specific to the implementation to convey additional + information such as interface index, physical card or + device, or application id. The interpretation of this + additional formatting is implementation dependent and + not covered in this document. Such formatting MUST + NOT impact the basic functionality of read-only access + to the MPLS-LSR-STD MIB by management applications that are + not aware of the formatting rules. + + The MIB is implemented in PRVT-LMGR with write-access. + As specified above, PRVT-LMGR treats the index values of this type + as simple integer types. + + In order to reduce the effort required to upgrade from earlier + versions of the MIB, and to simplify management of static LSPs, + this type is mapped on to an Integer32 in this implementation." + SYNTAX Integer32 (0..2147483647) + +PrvtMplsLdpInetAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x " + STATUS current + DESCRIPTION + "Same as InetAddress from INET-ADDRESS-MIB except restricted + to IPv4 or IPv6 addresses." + SYNTAX OCTET STRING (SIZE(4 | 16)) + +PrvtMplsLdpTimeStamp ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Same as TimeStamp from SNMPv2-TC, but has syntax Integer32" + SYNTAX Integer32 + +PrvtMplsLdpTimeInterval ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Same as TimeInterval from SNMPv2-TC, but has syntax Integer32" + SYNTAX Integer32 + +mplsLdpObjects OBJECT IDENTIFIER + ::= { prvtMplsLdpMIB 1 } + +mplsLdpEntityTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsLdpEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains information about the + MPLS Label Distribution Protocol Entities which + exist on this Label Switching Router (LSR) + or Label Edge Router (LER)." + ::= { mplsLdpObjects 1 } + +mplsLdpEntityEntry OBJECT-TYPE + SYNTAX MplsLdpEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents an LDP entity. + An entry can be created by a network administrator + or by an SNMP agent as instructed by LDP." + INDEX { prvtcrldpSigIndex, mplsLdpEntityLdpId, + mplsLdpEntityIndex } + ::= { mplsLdpEntityTable 1 } + +MplsLdpEntityEntry ::= SEQUENCE { + mplsLdpEntityLdpId PrvtMplsLdpIdentifier, + mplsLdpEntityIndex Unsigned32, + mplsLdpEntityRowStatus RowStatus, + mplsLdpEntityAdminStatus INTEGER, + mplsLdpEntityOperStatus INTEGER, + mplsLdpEntityMaxPduLength Unsigned32, + mplsLdpEntityKeepAliveHoldTimer Unsigned32, + mplsLdpEntityHelloHoldTimer Unsigned32, + mplsLdpEntityTargetPeer TruthValue, + mplsLdpEntityTargetPeerAddrType InetAddressType, + mplsLdpEntityTargetPeerAddr PrvtMplsLdpInetAddress +} + +mplsLdpEntityLdpId OBJECT-TYPE + SYNTAX PrvtMplsLdpIdentifier + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The LDP identifier. The first four octets encode an IP + address assigned to the LSR, and the last two octets + identify a specific label space within the LSR." + REFERENCE + "RFC3036, LDP Specification, Section on LDP Identifiers." + ::= { mplsLdpEntityEntry 1 } + +mplsLdpEntityIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This index is used as a secondary index to uniquely + identify this row. + + A secondary index (this object) is meaningful to some + but not all, LDP implementations. For example + an LDP implementation which uses PPP would + use this index to differentiate PPP sub-links. + + Another way to use this index is to give this the + value of ifIndex. However, this is dependant + on the implementation. + + This field is deprecated in the following tables provided + by PRVT-CR-LDP Session Controller. + + - mplsLdpEntityTable. + - mplsLdpPeerTable. + + In these tables the value of the Entity Index will always + be filled in to be 1." + ::= { mplsLdpEntityEntry 2 } + +mplsLdpEntityRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An object that allows entries in this table to + be created and deleted using the + RowStatus convention. + + Once the 'mplsLdpEntityAdminStatus' object has + the value of 'up' and this object has the value + of 'active' then the Entity will atttempt to + contact an LDP Peer. If the value of this object + is changed to 'notInService', then the Entity looses + contact with the LDP Peer and all information related + to that Peer must be removed from the MIB. This has + the same effect as changing 'mplsLdpEntityAdminStatus' + from 'enable' to 'disable'. + + When this object is set to 'active' and the value of + the 'mplsLdpEntityAdminStatus' is 'enable' then + this Entity will attempt to contact the Peer and + establish new sessions." + ::= { mplsLdpEntityEntry 3 } + +mplsLdpEntityAdminStatus OBJECT-TYPE + SYNTAX INTEGER { enable(1), disable(2) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The administrative status of this LDP Entity. + If this object is changed from 'enable' to 'disable' + and this entity has already attempted to establish + contact with a Peer (which implies that the + 'mplsLdpEntityRowStatus' object has been set to + 'active'), then all contact with that + Peer is lost and all information from that Peer + needs to be removed from the MIB. (This implies + that the network management subsystem should clean + up any related entry in the mplsLdpPeerTable. This + further implies that a 'tear-down' for that session + is issued and the session and all information related + to that session cease to exist). + + At this point the user is able to change values + which are related to this entity. + + When the admin status is set back to 'enable', then + this Entity will attempt to establish a new session + with the Peer." + ::= { mplsLdpEntityEntry 4 } + +mplsLdpEntityOperStatus OBJECT-TYPE + SYNTAX INTEGER { unknown(1), enabled(2), disabled(3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational status of this LDP Entity. + + The value of unknown(1) indicates that the + operational status cannot be determined at + this time. The value of unknown should be + a transient condition before changing + to enabled(2) or disabled(3)." + ::= { mplsLdpEntityEntry 5 } + +mplsLdpEntityMaxPduLength OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum PDU Length that is sent in + the Common Session Parameters of an Initialization + Message. According to the LDP Specification [RFC3036] + a value of 255 or less specifies the + default maximum length of 4096 octets. + + The receiving LSR MUST calculate the maximum PDU + length for the session by using the smaller of its and + its peer's proposals for Max PDU Length." + REFERENCE + "RFC3036, LDP Specification, Section 3.5.3. + Initialization Message." + ::= { mplsLdpEntityEntry 6 } + +mplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The 16-bit integer value which is the proposed keep + alive hold timer for this LDP Entity." + ::= { mplsLdpEntityEntry 7 } + +mplsLdpEntityHelloHoldTimer OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The 16-bit integer value which is the proposed Hello + hold timer for this LDP Entity. The Hello Hold time + in seconds. + + An LSR maintains a record of Hellos received + from potential peers. This object represents + the Hold Time in the Common Hello Parameters TLV of + the Hello Message. + + A value of 0 is a default value and should be + interpretted in conjunction with the + mplsLdpEntityTargetPeer object. + + If the value of this object is 0: if the value of the + mplsLdpEntityTargetPeer object is false(2), then this + specifies that the Hold Time's actual default value is + 15 seconds (i.e., the default Hold time for Link Hellos + is 15 seconds). Otherwise if the value of the + mplsLdpEntityTargetPeer object is true(1), then this + specifies that the Hold Time's actual default value is + 45 seconds (i.e., the default Hold time for Targeted + Hellos is 45 seconds). + + A value of 65535 means infinite (i.e., wait forever). + + All other values represent the amount of time in + seconds to wait for a Hello Message. Setting the + hold time to a value smaller than 15 is not + recommended, although not forbidden according + to RFC3036. + + For auto-created entities that use the global label space + (and therefore might correspond to more than one + adjacency over more than one interface), this value will + only be meaningful if all interfaces that correspond to + this entity are configured to use the same hello hold + time, since this property can be configured on a per + interface basis. + + If the interfaces have differing configurations, the + value returned on a MIB Get will be 0." + REFERENCE + "RFC3036, LDP Specification, Section 3.5.2., + Hello Message." + ::= { mplsLdpEntityEntry 8 } + +mplsLdpEntityTargetPeer OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If this LDP entity uses targeted peer then set + this to true." + ::= { mplsLdpEntityEntry 9 } + +mplsLdpEntityTargetPeerAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of the internetwork layer address used for + the Extended Discovery. This object indicates how + the value of mplsLdpEntityTargetPeerAddr is to + be interpreted." + ::= { mplsLdpEntityEntry 10 } + +mplsLdpEntityTargetPeerAddr OBJECT-TYPE + SYNTAX PrvtMplsLdpInetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of the internetwork layer address + used for the Extended Discovery. The value of + mplsLdpEntityTargetPeerAddrType specifies how + this address is to be interpreted." + ::= { mplsLdpEntityEntry 11 } + +mplsLdpPeerTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsLdpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about LDP peers known by Entities in + the mplsLdpEntityTable. The information in this table + is based on information from the Entity-Peer interaction + during session initialization but is not appropriate + for the mplsLdpSessionTable, because objects in this + table may or may not be used in session establishment." + ::= { mplsLdpObjects 2 } + +mplsLdpPeerEntry OBJECT-TYPE + SYNTAX MplsLdpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single Peer which is related + to a Session. NOTE: this table is used to + augment the mplsLdpSessionTable." + INDEX { prvtcrldpPmIndex, mplsLdpEntityLdpId, + mplsLdpEntityIndex, mplsLdpPeerLdpId } + ::= { mplsLdpPeerTable 1 } + +MplsLdpPeerEntry ::= SEQUENCE { + mplsLdpPeerLdpId PrvtMplsLdpIdentifier, + mplsLdpPeerLabelDistMethod MplsLabelDistributionMethod, + mplsLdpPeerTransportAddrType InetAddressType, + mplsLdpPeerTransportAddr PrvtMplsLdpInetAddress +} + +mplsLdpPeerLdpId OBJECT-TYPE + SYNTAX PrvtMplsLdpIdentifier + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The LDP identifier of this LDP Peer." + ::= { mplsLdpPeerEntry 1 } + +mplsLdpPeerLabelDistMethod OBJECT-TYPE + SYNTAX MplsLabelDistributionMethod + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For any given LDP session, the method of + label distribution must be specified." + ::= { mplsLdpPeerEntry 2 } + +mplsLdpPeerTransportAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the Internet address for the + mplsLdpPeerTransportAddr object. The LDP + specification describes this as being either + an IPv4 Transport Address or IPv6 Transport + Address which is used in opening the LDP session's + TCP connection, or if the optional TLV is not + present, then this is the IPv4/IPv6 source + address for the UPD packet carrying the Hellos. + + This object specifies how the value of the + mplsLdpPeerTransportAddr object should be + interpreted." + REFERENCE + "RFC3036, LDP Specification, Section 2.5.2 + Transport Connection Establishment and + Section 3.5.2.1 Hello Message Procedures." + ::= { mplsLdpPeerEntry 3 } + +mplsLdpPeerTransportAddr OBJECT-TYPE + SYNTAX PrvtMplsLdpInetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Internet address advertised by the peer + in the Hello Message or the Hello source address. + + The type of this address is specified by the + value of the mplsLdpPeerTransportAddrType + object." + REFERENCE + "RFC3036, LDP Specification, Section 2.5.2 + Transport Connection Establishment and + Section 3.5.2.1 Hello Message Procedures." + ::= { mplsLdpPeerEntry 4 } + +mplsLdpSessionTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsLdpSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Sessions between the LDP Entities + and LDP Peers. Each row in this table + represents a single session." + ::= { mplsLdpObjects 3 } + +mplsLdpSessionEntry OBJECT-TYPE + SYNTAX MplsLdpSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents information on a + single session between an LDP Entity and LDP Peer. + The information contained in a row is read-only. + + Please note: the Path Vector Limit for the + Session is the value which is configured in + the corresponding mplsLdpEntityEntry. The + Peer's Path Vector Limit is in the + mplsLdpPeerPathVectorLimit object in the + mplsLdpPeerTable. + + Values which may differ from those configured are + noted in the objects of this table. A value will + differ if it was negotiated between the + Entity and the Peer. Values may or may not + be negotiated. For example, if the values + are the same then no negotiation takes place. + If they are negotiated, then they may differ." + INDEX { prvtcrldpSigIndex, mplsLdpEntityLdpId, + mplsLdpEntityIndex, mplsLdpPeerLdpId } + ::= { mplsLdpSessionTable 1 } + +MplsLdpSessionEntry ::= SEQUENCE { + mplsLdpSessionStateLastChange PrvtMplsLdpTimeStamp, + mplsLdpSessionState INTEGER, + mplsLdpSessionKeepAliveHoldTimeRemaining PrvtMplsLdpTimeInterval, + mplsLdpSessionKeepAliveTime Unsigned32, + mplsLdpSessionMaxPduLength Unsigned32, + mplsLdpSessionConfiguredHoldTime Unsigned32, + mplsLdpSessionPeerHoldTime Unsigned32, + mplsLdpSessionHoldTimeInUse Unsigned32 +} + +mplsLdpSessionStateLastChange OBJECT-TYPE + SYNTAX PrvtMplsLdpTimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this + Session entered its current state as + denoted by the mplsLdpSessionState + object." + ::= { mplsLdpSessionEntry 1 } + +mplsLdpSessionState OBJECT-TYPE + SYNTAX INTEGER { nonexistent(1), initialized(2), openrec(3), + opensent(4), operational(5) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of the session, all of the + states 1 - 5 are based on the state machine + for session negotiation behavior." + REFERENCE + "RFC3036, LDP Specification, Section 2.5.4, + Initialization State Machine." + ::= { mplsLdpSessionEntry 2 } + +mplsLdpSessionKeepAliveHoldTimeRemaining OBJECT-TYPE + SYNTAX PrvtMplsLdpTimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The keep alive hold time remaining for this session in + units of hundredths of a second. This interval will + change when the 'next' Keep Alive message which + corresponds to this session is received. A value of zero + indicates that the keep alive hold timer is not running." + ::= { mplsLdpSessionEntry 3 } + +mplsLdpSessionKeepAliveTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The negotiated KeepAlive Time which + represents the amount of seconds between + keep alive messages. The + mplsLdpEntityKeepAliveHoldTimer + related to this Session is the + value that was proposed as the + KeepAlive Time for this session. + + This value is negotiated during + session initialization between + the entity's proposed value + (i.e., the value configured in + mplsLdpEntityKeepAliveHoldTimer) + and the peer's proposed + KeepAlive Hold Timer value. + This value is the smaller + of the two proposed values." + REFERENCE + "RFC3036, LDP Specification, Section 3.5.3, + Initialization Message." + ::= { mplsLdpSessionEntry 4 } + +mplsLdpSessionMaxPduLength OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of maximum allowable length for LDP PDUs for + this session. This value may have been negotiated + during the Session Initialization. This object is + related to the mplsLdpEntityMaxPduLength object. The + mplsLdpEntityMaxPduLength object specifies the requested + LDP PDU length, and this object reflects the negotiated + LDP PDU length between the Entity and + the Peer." + REFERENCE + "RFC3036, LDP Specification, Section 3.5.3, + Initialization Message." + ::= { mplsLdpSessionEntry 5 } + +mplsLdpSessionConfiguredHoldTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The locally configured keepalive hold time for this + session, in seconds. Note that the value of this field + reflects configuration at the time of session + initialization; this may differ from the configuration + that would apply to a new session, if configuration has + changed since this session was initialized." + ::= { mplsLdpSessionEntry 6 } + +mplsLdpSessionPeerHoldTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peer's advertised keepalive hold time for this session + in seconds. Note that the value of this field reflects + the peer's configuration at the time of session + initialization; this may differ from the configuration + that would apply to a new session, if the peer's + configuration has changed since this session was + initialized." + ::= { mplsLdpSessionEntry 7 } + +mplsLdpSessionHoldTimeInUse OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The keepalive hold time that is currently in use for this + session, in seconds." + ::= { mplsLdpSessionEntry 8 } + +mplsLdpHelloAdjacencyTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsLdpHelloAdjacencyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Hello Adjacencies for Sessions." + ::= { mplsLdpObjects 4 } + +mplsLdpHelloAdjacencyEntry OBJECT-TYPE + SYNTAX MplsLdpHelloAdjacencyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row represents a single LDP Hello Adjacency. + An LDP Session can have one or more Hello adjacencies." + INDEX { prvtcrldpSigIndex, mplsLdpEntityLdpId, + mplsLdpEntityIndex, mplsLdpPeerLdpId, + mplsLdpHelloAdjacencyIndex } + ::= { mplsLdpHelloAdjacencyTable 1 } + +MplsLdpHelloAdjacencyEntry ::= SEQUENCE { + mplsLdpHelloAdjacencyIndex Unsigned32, + mplsLdpHelloAdjacencyHoldTimeRemaining PrvtMplsLdpTimeInterval, + mplsLdpHelloAdjacencyHoldTime Unsigned32, + mplsLdpHelloAdjacencyType INTEGER, + mplsLdpHelloAdjacencyConfiguredHoldTime Unsigned32, + mplsLdpHelloAdjacencyPeerHoldTime Unsigned32 +} + +mplsLdpHelloAdjacencyIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An identifier for this specific adjacency." + ::= { mplsLdpHelloAdjacencyEntry 1 } + +mplsLdpHelloAdjacencyHoldTimeRemaining OBJECT-TYPE + SYNTAX PrvtMplsLdpTimeInterval + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the value of this object is 65535, + this means that the hold time is infinite + (i.e., wait forever). + + Otherwise, the time remaining for + this Hello Adjacency to receive its + next Hello Message. + + This interval will change when the 'next' + Hello Message which corresponds to this + Hello Adjacency is received unless it + is infinite." + ::= { mplsLdpHelloAdjacencyEntry 2 } + +mplsLdpHelloAdjacencyHoldTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Hello hold time which is negotiated between + the Entity and the Peer. The entity associated + with this Hello Adjacency issues a proposed + Hello Hold Time value in the + mplsLdpEntityHelloHoldTimer object. The peer + also proposes a value and this object represents + the negotiated value. + + A value of 0 means the default, + which is 15 seconds for Link Hellos + and 45 seconds for Targeted Hellos. + A value of 65535 indicates an + infinite hold time." + REFERENCE + "RFC3036, LDP Specification, Section 3.5.2 Hello Message" + ::= { mplsLdpHelloAdjacencyEntry 3 } + +mplsLdpHelloAdjacencyType OBJECT-TYPE + SYNTAX INTEGER { link(1), targeted(2) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This adjacency is the result of a 'link' + hello if the value of this object is link(1). + Otherwise, it is a result of a 'targeted' + hello, targeted(2)." + ::= { mplsLdpHelloAdjacencyEntry 4 } + +mplsLdpHelloAdjacencyConfiguredHoldTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The locally configured hello hold time for this adjacency, + in seconds." + ::= { mplsLdpHelloAdjacencyEntry 5 } + +mplsLdpHelloAdjacencyPeerHoldTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peer's advertised hello hold time for this adjacency, + in seconds." + ::= { mplsLdpHelloAdjacencyEntry 6 } + +mplsLdpSessionPeerAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF MplsLdpSessionPeerAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table 'extends' the mplsLdpSessionTable. + This table is used to store Label Address Information + from Label Address Messages received by this LSR from + Peers. This table is read-only and should be updated + when Label Withdraw Address Messages are received, i.e., + Rows should be deleted as appropriate. + + NOTE: since more than one address may be contained + in a Label Address Message, this table 'sparse augments', + the mplsLdpSessionTable's information." + ::= { mplsLdpObjects 5 } + +mplsLdpSessionPeerAddrEntry OBJECT-TYPE + SYNTAX MplsLdpSessionPeerAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents information on + a session's single next hop address which was + advertised in an Address Message from the LDP peer. + The information contained in a row is read-only." + INDEX { prvtcrldpPmIndex, mplsLdpEntityLdpId, + mplsLdpEntityIndex, mplsLdpPeerLdpId, + mplsLdpSessionPeerAddrIndex } + ::= { mplsLdpSessionPeerAddrTable 1 } + +MplsLdpSessionPeerAddrEntry ::= SEQUENCE { + mplsLdpSessionPeerAddrIndex Unsigned32, + mplsLdpSessionPeerNextHopAddrType InetAddressType, + mplsLdpSessionPeerNextHopAddr PrvtMplsLdpInetAddress +} + +mplsLdpSessionPeerAddrIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index which uniquely identifies this entry within + a given session." + ::= { mplsLdpSessionPeerAddrEntry 1 } + +mplsLdpSessionPeerNextHopAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internetwork layer address type of this Next Hop + Address as specified in the Label Address Message + associated with this Session. The value of this + object indicates how to interpret the value of + mplsLdpSessionPeerNextHopAddr." + ::= { mplsLdpSessionPeerAddrEntry 2 } + +mplsLdpSessionPeerNextHopAddr OBJECT-TYPE + SYNTAX PrvtMplsLdpInetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The next hop address. The type of this address + is specified by the value of the + mplsLdpSessionPeerNextHopAddrType." + REFERENCE + "RFC3036, Section 2.7. LDP Identifiers + and Next Hop Addresses" + ::= { mplsLdpSessionPeerAddrEntry 3 } + +END -- end of module PRVT-MPLS-LDP-MIB. |