diff options
Diffstat (limited to 'MIBS/telco-systems/binos/PRVT-OSPF-EXTENSION-MIB')
| -rw-r--r-- | MIBS/telco-systems/binos/PRVT-OSPF-EXTENSION-MIB | 232 |
1 files changed, 232 insertions, 0 deletions
diff --git a/MIBS/telco-systems/binos/PRVT-OSPF-EXTENSION-MIB b/MIBS/telco-systems/binos/PRVT-OSPF-EXTENSION-MIB new file mode 100644 index 0000000..8f06b95 --- /dev/null +++ b/MIBS/telco-systems/binos/PRVT-OSPF-EXTENSION-MIB @@ -0,0 +1,232 @@ +-- ********************************************************************* +-- ********************************************************************* +-- ** Filename: PRVT-OSPF-EXTENSION-MIB +-- ********************************************************************* +-- ********************************************************************* +-- ** Filename: PRVT-CONFIGCHANGE-MIB +-- ** Project: T - Ethernet and Fast Ethernet IP Switches. +-- ** Purpose: Private MIB +-- ********************************************************************* +-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved. +-- WARNING: +-- +-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: +-- +-- This file is the property of BATM Advanced Communications. +-- BATM Advanced Communications retains all title and +-- ownership in the Specification, including any revisions. + +-- BATM Advanced Communications grants all interested parties a non-exclusive +-- license to use and distribute an unmodified copy of this +-- Specification in connection with management of BATM Advanced Communications +-- and Telco Systems products, and without fee, provided that the following +-- conditions are met: +-- 1. Redistributions of this specification must retain the above copyright +-- notice, this list of conditions and the following disclaimer. +-- 2. Redistributions in binary form must reproduce the above copyright +-- notice, this list of conditions and the following disclaimer in the +-- documentation and/or other materials provided with the distribution. +-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse +-- or promote products derived from this specification without specific prior written +-- permission. +-- +-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED +-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE +-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES +-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER +-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS +-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR +-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY +-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE. +-- ********************************************************************* +-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved. +-- WARNING: +-- +-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: +-- +-- This file is the property of BATM Advanced Communications. +-- BATM Advanced Communications retains all title and +-- ownership in the Specification, including any revisions. + +-- BATM Advanced Communications grants all interested parties a non-exclusive +-- license to use and distribute an unmodified copy of this +-- Specification in connection with management of BATM Advanced Communications +-- and Telco Systems products, and without fee, provided that the following +-- conditions are met: +-- 1. Redistributions of this specification must retain the above copyright +-- notice, this list of conditions and the following disclaimer. +-- 2. Redistributions in binary form must reproduce the above copyright +-- notice, this list of conditions and the following disclaimer in the +-- documentation and/or other materials provided with the distribution. +-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse +-- or promote products derived from this specification without specific prior written +-- permission. +-- +-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED +-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE +-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES +-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER +-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS +-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR +-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY +-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE. +PRVT-OSPF-EXTENSION-MIB DEFINITIONS ::= BEGIN +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE + FROM SNMPv2-SMI + TruthValue, RowStatus + FROM SNMPv2-TC +ipSwitch + FROM PRVT-SWITCH-MIB; + + + prvtOSPFExtensionMib MODULE-IDENTITY + LAST-UPDATED "200801010000Z" + ORGANIZATION "BATM Advanced Communication" + CONTACT-INFO + "BATM/Telco Systems Support team + Email: + For North America: techsupport@telco.com + For North Europe: support@batm.de, info@batm.de + For the rest of the world: techsupport@telco.com" + + DESCRIPTION + "The OSPF extension MIB module contains additional information, needed to + control the OSPF protocol, that is not found in the standard RFC" + + -- revision history + REVISION "200801010000Z" + DESCRIPTION + "Removed redefined OIDs in private vendor extension definitions." + REVISION "200502160000Z" + DESCRIPTION + "Fixed spelling errors and changed the contact info." + + REVISION "200211110000Z" + DESCRIPTION + "Initial version." + + + ::= { routingProtocols 2 } + + ------------------------------------------------------------------------------- + -- PRIVATE BRANCH PRODUCTS + ------------------------------------------------------------------------------- + routingProtocols OBJECT IDENTIFIER ::= { ipSwitch 4 } + + + ospfExtension OBJECT IDENTIFIER ::= { prvtOSPFExtensionMib 1 } + + ospfEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object enables/disables the OSPF process in the switch" + ::= { ospfExtension 1 } + + ospfRedistributeTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfRedistributeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table represents the routing protocols, redistributed into the OSPF + routing domain. + + Creation of conceptual row in the table starts the redistribution of the + specified protocol, which would lead to the injection of routing information + from that protocol into the OSPF. + + Deletion of conceptual row would stop the redistribution of that protocol + into the OSPF. + + OSPF router, which redistributes routing information from other + protocols, is an ASBR router" + ::= { ospfExtension 2 } + + ospfRedistributeEntry OBJECT-TYPE + SYNTAX OspfRedistributeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The conceptual row represents a routing protocol, redistributed into OSPF" + INDEX {ospfRedistributeProtocol} + ::= {ospfRedistributeTable 1} + + OspfRedistributeEntry ::= SEQUENCE { + ospfRedistributeProtocol INTEGER, + ospfRedistributeMetric INTEGER, + ospfRedistributeMetricType INTEGER, + ospfRedistributeRouteMap OCTET STRING, + ospfRedistributeRowStatus RowStatus + } + + + ospfRedistributeProtocol OBJECT-TYPE + SYNTAX INTEGER { + kernel (1), + connected(2), + static (3), + rip (4), + bgp (5) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The specific routes redistributed into OSPF. For T4R model the valid values + are connected, rip and static. + For all the other models all of the above routes can be redistributed " + ::= { ospfRedistributeEntry 1} + + ospfRedistributeMetric OBJECT-TYPE + SYNTAX INTEGER (0..16777214) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The metric, with which the external routes will be redistributed in the OSPF" + ::= {ospfRedistributeEntry 2} + + ospfRedistributeMetricType OBJECT-TYPE + SYNTAX INTEGER { + e1(1), + e2(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of metric, with which the external routes are advertised into the OSPF + routing domain. OSPF supports two types of external metrics. Type 1 external + metrics are expressed in the same units as the OSPF interface cost (i.e., in terms + of the link state metric). Type 2 external metrics are an order of magnitude larger; + any Type 2 metric is considered greater than the cost of any path internal to the AS. + Use of Type 2 external metrics assumes that routing between AS'es is the major + cost of routing a packet, and eliminates the need for conversion of external costs + to internal link state metrics." + ::= {ospfRedistributeEntry 3} + + ospfRedistributeRouteMap OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The route map that would filter the redistributed routing information" + ::= {ospfRedistributeEntry 4} + + ospfRedistributeRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the status of the row. Setting of this field to active enables the + redistribution of the protocol. + + Setting this field to destroy disables the redistribution of the protocol." + ::= {ospfRedistributeEntry 5} + + +END + |