diff options
Diffstat (limited to 'MIBS/telco-systems/binos/PRVT-L2TUNNELING-MIB')
| -rw-r--r-- | MIBS/telco-systems/binos/PRVT-L2TUNNELING-MIB | 492 |
1 files changed, 492 insertions, 0 deletions
diff --git a/MIBS/telco-systems/binos/PRVT-L2TUNNELING-MIB b/MIBS/telco-systems/binos/PRVT-L2TUNNELING-MIB new file mode 100644 index 0000000..89385c3 --- /dev/null +++ b/MIBS/telco-systems/binos/PRVT-L2TUNNELING-MIB @@ -0,0 +1,492 @@ +-- ********************************************************************* +-- ********************************************************************* +-- ** Filename: PRVT-L2TUNNELING-MIB.mib +-- ** Project: T - Ethernet and Fast Ethernet IP Switches. +-- ** Purpose: Private MIB +-- ********************************************************************* +-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved. +-- WARNING: +-- +-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING: +-- +-- This file is the property of BATM Advanced Communications. +-- BATM Advanced Communications retains all title and +-- ownership in the Specification, including any revisions. + +-- BATM Advanced Communications grants all interested parties a non-exclusive +-- license to use and distribute an unmodified copy of this +-- Specification in connection with management of BATM Advanced Communications +-- and Telco Systems products, and without fee, provided that the following +-- conditions are met: +-- 1. Redistributions of this specification must retain the above copyright +-- notice, this list of conditions and the following disclaimer. +-- 2. Redistributions in binary form must reproduce the above copyright +-- notice, this list of conditions and the following disclaimer in the +-- documentation and/or other materials provided with the distribution. +-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse +-- or promote products derived from this specification without specific prior written +-- permission. +-- +-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED +-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE +-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES +-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER +-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS +-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR +-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY +-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE. +PRVT-L2TUNNELING-MIB DEFINITIONS ::= BEGIN + +IMPORTS +MODULE-IDENTITY, +OBJECT-TYPE, +Integer32, +Counter32 +FROM SNMPv2-SMI + +MODULE-COMPLIANCE, +OBJECT-GROUP +FROM SNMPv2-CONF + +RowStatus +FROM SNMPv2-TC + +sapBaseInfoEntry, +sdpInfoEntry, +svcId, +sapPortId, +sapEncapValue, +sdpId +FROM PRVT-SERV-MIB + +serviceAccessSwitch +FROM PRVT-QOS-MIB; + + +prvtL2TunnelingMIB MODULE-IDENTITY +LAST-UPDATED "200910200000Z" +ORGANIZATION "BATM Advanced Communication" +CONTACT-INFO +" BATM/Telco Systems Support team +Email: +For North America: techsupport@telco.com +For North Europe: support@batm.de, info@batm.de +For the rest of the world: techsupport@telco.com" +DESCRIPTION +"This document is the SNMP MIB module to manage tunneling feature, + designed for service providers." + +-- +-- Revision History +-- +REVISION "200910200000Z" +DESCRIPTION "Initial version." + + +::= { serviceAccessSwitch 3 } + + +-- -------------------------------------------------------------------- +-- PRVT-L2TUNNELING-MIB organisation +-- -------------------------------------------------------------------- +prvtL2TunnNotifications OBJECT IDENTIFIER ::= { prvtL2TunnelingMIB 0 } +prvtL2TunnObjects OBJECT IDENTIFIER ::= { prvtL2TunnelingMIB 1 } +prvtL2TunnConformance OBJECT IDENTIFIER ::= { prvtL2TunnelingMIB 2 } + +-- -------------------------------------------------------------------- +-- PRVT-L2TUNNELING-MIB Textual Conventions +-- -------------------------------------------------------------------- + + +-------------------------------------------------------------- +--PRVT-L2TUNNELING objects +-------------------------------------------------------------- +prvtL2TunnEnable OBJECT-TYPE +SYNTAX INTEGER { +enable(1), +disable(2) +} +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"Enable/Disable L2Tunneling feature" +DEFVAL { disable } +::= { prvtL2TunnObjects 1 } + +-- prvtL2TunnProfileTable +prvtL2TunnProfileTable OBJECT-TYPE +SYNTAX SEQUENCE OF PrvtL2TunnProfileEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"A Table that contain all predefined and defined profiles." +::= { prvtL2TunnObjects 2 } + +prvtL2TunnProfileEntry OBJECT-TYPE +SYNTAX PrvtL2TunnProfileEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"An entry in this table contains a TLS tunneling profile" +INDEX {prvtL2TunnProfileName } +::= {prvtL2TunnProfileTable 1} + +PrvtL2TunnProfileEntry ::= SEQUENCE { +prvtL2TunnProfileName OCTET STRING , +prvtL2TunnProfileRowStatus RowStatus +} + + +prvtL2TunnProfileName OBJECT-TYPE +SYNTAX OCTET STRING (SIZE(33)) +MAX-ACCESS read-create +STATUS current +DESCRIPTION +"TLS profile name. There will be three special profiles that will represent predefined policies: + - Discard-All, + - Tunnel-BPDUs-only + - Tunnel-All. " +::= {prvtL2TunnProfileEntry 1} + +prvtL2TunnProfileRowStatus OBJECT-TYPE +SYNTAX RowStatus +MAX-ACCESS read-create +STATUS current +DESCRIPTION +"TLS profile rowStatus. It is not possible to modify the predefined profiles." +::= {prvtL2TunnProfileEntry 2} + +--prvtL2ProtocolsTable +prvtL2ProtocolsTable OBJECT-TYPE +SYNTAX SEQUENCE OF PrvtL2ProtocolsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"A table that contain all predefine and custom defined L2Protocols" +::= { prvtL2TunnObjects 3 } + +prvtL2ProtocolsEntry OBJECT-TYPE +SYNTAX PrvtL2ProtocolsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"An entry is a L2 protocol with the replacement multicast MAC addresses. " +INDEX{ prvtL2ProtocolName } +::= {prvtL2ProtocolsTable 1} + +PrvtL2ProtocolsEntry ::= SEQUENCE{ +prvtL2ProtocolName OCTET STRING, +prvtL2ProtocolEthertype Integer32, +prvtL2ProtocolMAC OCTET STRING, +prvtL2ReplaceMAC OCTET STRING, +prvtL2ProtocolRowStatus RowStatus + +} +prvtL2ProtocolName OBJECT-TYPE +SYNTAX OCTET STRING (SIZE (17)) +MAX-ACCESS read-create +STATUS current +DESCRIPTION +"L2 Protocol Name. There will the follow default protocol: + - xSTP + - LACP/LAMP + - Link OAM (802.3ah) + - Port Authentication (802.1x) + - E-LMI + - LLDP + - All other bridge block of protocols + - All Bridges + - GARP Block of Protocols + - Provider Bridge STP." +::= {prvtL2ProtocolsEntry 1} + +prvtL2ProtocolEthertype OBJECT-TYPE +SYNTAX Integer32 (1..65535) +MAX-ACCESS read-create +STATUS current +DESCRIPTION +"Protocol Ethertype." +::= {prvtL2ProtocolsEntry 2} + +prvtL2ProtocolMAC OBJECT-TYPE +SYNTAX OCTET STRING +MAX-ACCESS read-create +STATUS current +DESCRIPTION +"The protocol Multicast MAC address used for PDU distribution. " +::= {prvtL2ProtocolsEntry 3} + +prvtL2ReplaceMAC OBJECT-TYPE +SYNTAX OCTET STRING +MAX-ACCESS read-create +STATUS current +DESCRIPTION +"Replacement multicast MAC addresses." +::= {prvtL2ProtocolsEntry 4} + +prvtL2ProtocolRowStatus OBJECT-TYPE +SYNTAX RowStatus +MAX-ACCESS read-create +STATUS current +DESCRIPTION +"prvtL2CustomProtocols RowStatus used for CREATE/DELETE the custom protocols. + It is not possible to modify the predefined protocols." +::= {prvtL2ProtocolsEntry 5} + + + + +--prvtL2TunnProfMapProtoTable +prvtL2TunnProfMapProtoTable OBJECT-TYPE +SYNTAX SEQUENCE OF PrvtL2TunnProfMapProtoEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"A Table that contain actions configured for each L2 protcol per TLS tunneling profile." +::= { prvtL2TunnObjects 4 } + +prvtL2TunnProfMapProtoEntry OBJECT-TYPE +SYNTAX PrvtL2TunnProfMapProtoEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"An entry in this table contain th action for specified profile and L2 protocol" +INDEX {prvtL2TunnProfileName, prvtL2ProtocolName } +::= {prvtL2TunnProfMapProtoTable 1} + +PrvtL2TunnProfMapProtoEntry ::= SEQUENCE{ +prvtL2TunnAction INTEGER + +} +prvtL2TunnAction OBJECT-TYPE +SYNTAX INTEGER{ +tunnel (1), +discard (2) +} +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"Define action discard/tunnel per TLS tunneled protocol " +DEFVAL { discard } +::= {prvtL2TunnProfMapProtoEntry 1} + + +--prvtL2TunnSAPPointsTable +prvtL2TunnSAPPointsTable OBJECT-TYPE +SYNTAX SEQUENCE OF PrvtL2TunnSAPPointsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"A Table that contain an assigment of a profile to a SAP." +::= { prvtL2TunnObjects 5 } + +prvtL2TunnSAPPointsEntry OBJECT-TYPE +SYNTAX PrvtL2TunnSAPPointsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"An entry in this table contain information about the map between SAP and L2Tunneling profile." +AUGMENTS { sapBaseInfoEntry } +::= { prvtL2TunnSAPPointsTable 1 } + +PrvtL2TunnSAPPointsEntry ::= SEQUENCE{ +profileSAP OCTET STRING +} + +profileSAP OBJECT-TYPE +SYNTAX OCTET STRING (SIZE(33)) +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"Profile Id associated to a SAP point. + Setting this object with an empty string will disable the profile." +::= {prvtL2TunnSAPPointsEntry 1} + +--prvtL2TunnSDPPointsTable +prvtL2TunnSDPPointsTable OBJECT-TYPE +SYNTAX SEQUENCE OF PrvtL2TunnSDPPointsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"A Table that contain an assigment of a profile to a SDP." +::= { prvtL2TunnObjects 6 } + +prvtL2TunnSDPPointsEntry OBJECT-TYPE +SYNTAX PrvtL2TunnSDPPointsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"An entry in this table contain information about the map between SDP and L2Tunneling profile." +AUGMENTS { sdpInfoEntry } +::= { prvtL2TunnSDPPointsTable 1 } + +PrvtL2TunnSDPPointsEntry ::= SEQUENCE{ +profileSDP OCTET STRING +} + +profileSDP OBJECT-TYPE +SYNTAX OCTET STRING (SIZE(33)) +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"Profile Id associated to an SDP point. + Setting this object with an empty string will disable the profile." +::= {prvtL2TunnSDPPointsEntry 1} + + + +prvtL2TunnClearStatistics OBJECT-TYPE +SYNTAX INTEGER { +none(0), +clear(1) +} +MAX-ACCESS read-write +STATUS current +DESCRIPTION +"Clear L2Tunneling statistics for each tunneling point" +DEFVAL { none } +::= { prvtL2TunnObjects 7 } + +--prvtL2TunnSapStatisticsTable +prvtL2TunnSapStatisticsTable OBJECT-TYPE +SYNTAX SEQUENCE OF PrvtL2TunnSapStatisticsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"A Table that provide statistics for each tunneling point per protocol." +::= { prvtL2TunnObjects 8 } + +prvtL2TunnSapStatisticsEntry OBJECT-TYPE +SYNTAX PrvtL2TunnSapStatisticsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"An entry in this table contain the number of SAP tunneling RX and TX packets ." +INDEX {svcId, sapPortId, sapEncapValue, prvtL2ProtocolName} +::= { prvtL2TunnSapStatisticsTable 1 } + +PrvtL2TunnSapStatisticsEntry ::= SEQUENCE{ +l2TunnSapRxPackets Counter32, +l2TunnSapTxPackets Counter32 +} + +l2TunnSapRxPackets OBJECT-TYPE +SYNTAX Counter32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION +"The number of SAP Rx L2Tunneling packets" +::= { prvtL2TunnSapStatisticsEntry 1} + +l2TunnSapTxPackets OBJECT-TYPE +SYNTAX Counter32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION +"The number of SAP Tx L2Tunneling packets" +::= { prvtL2TunnSapStatisticsEntry 2} + + +--prvtL2TunnSdpStatisticsTable +prvtL2TunnSdpStatisticsTable OBJECT-TYPE +SYNTAX SEQUENCE OF PrvtL2TunnSdpStatisticsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"A Table that provide statistics for each tunneling point per protocol." +::= { prvtL2TunnObjects 9 } + +prvtL2TunnSdpStatisticsEntry OBJECT-TYPE +SYNTAX PrvtL2TunnSdpStatisticsEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION +"An entry in this table contain the number of SDP tunneling RX and TX packets ." +INDEX {svcId, sdpId , prvtL2ProtocolName } +::= { prvtL2TunnSdpStatisticsTable 1 } + +PrvtL2TunnSdpStatisticsEntry ::= SEQUENCE{ +l2TunnSdpRxPackets Counter32, +l2TunnSdpTxPackets Counter32 +} + +l2TunnSdpRxPackets OBJECT-TYPE +SYNTAX Counter32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION +"The number of SDP Rx L2Tunneling packets" +::= { prvtL2TunnSdpStatisticsEntry 1} + +l2TunnSdpTxPackets OBJECT-TYPE +SYNTAX Counter32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION +"The number of SDP Tx L2Tunneling packets" +::= { prvtL2TunnSdpStatisticsEntry 2} + + + +-- ---------------------------------------------------------------------------- +-- Conformance Information +-- ---------------------------------------------------------------------------- +prvtL2TunnCompliances OBJECT IDENTIFIER ::= { prvtL2TunnConformance 1 } +prvtL2TunnGroups OBJECT IDENTIFIER ::= { prvtL2TunnConformance 2 } + +-- compliance statements +prvtL2TunnCompliance MODULE-COMPLIANCE +STATUS current +DESCRIPTION +"The compliance statement for L2Tunneling." +MODULE -- this module +MANDATORY-GROUPS { +prvtL2TunnProtocolGroup, +prvtL2TunnProfileGroup, +prvtL2TunnPointGroup +} +::= { prvtL2TunnCompliances 1 } + +prvtL2TunnProtocolGroup OBJECT-GROUP +OBJECTS {prvtL2ProtocolName, +prvtL2ReplaceMAC, +prvtL2ProtocolEthertype, +prvtL2ProtocolMAC, +prvtL2ReplaceMAC, +prvtL2ProtocolRowStatus +} +STATUS current +DESCRIPTION +"The group of objects regarding Layer 2 protocol with a special MAC address ." +::= { prvtL2TunnGroups 1 } + +prvtL2TunnProfileGroup OBJECT-GROUP +OBJECTS { prvtL2TunnEnable, +prvtL2TunnProfileName, +prvtL2TunnProfileRowStatus +} +STATUS current +DESCRIPTION +"The group of objects used to configure a L2Tunneling profile ." +::= { prvtL2TunnGroups 2 } + +prvtL2TunnPointGroup OBJECT-GROUP +OBJECTS {prvtL2TunnAction, +profileSDP, +profileSAP, +l2TunnSapRxPackets, +l2TunnSapTxPackets, +l2TunnSdpRxPackets, +l2TunnSdpTxPackets +} +STATUS current +DESCRIPTION +"The group of objects used L2Tunneling point ." +::= { prvtL2TunnGroups 3 } + + + + +END |