diff options
Diffstat (limited to 'MIBS/solidoptics/SO-MUX-MIB')
| -rw-r--r-- | MIBS/solidoptics/SO-MUX-MIB | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/MIBS/solidoptics/SO-MUX-MIB b/MIBS/solidoptics/SO-MUX-MIB new file mode 100644 index 0000000..d0b7f57 --- /dev/null +++ b/MIBS/solidoptics/SO-MUX-MIB @@ -0,0 +1,215 @@ +SO-MUX-MIB DEFINITIONS ::= BEGIN + +-- +-- Solid Optics EDFAMUX MIB +-- + +IMPORTS + MODULE-IDENTITY, enterprises, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI + MODULE-COMPLIANCE,OBJECT-GROUP FROM SNMPv2-CONF +; + +solidOptics MODULE-IDENTITY + LAST-UPDATED "202007030000Z" + ORGANIZATION "Solid Optics" + CONTACT-INFO + "Solid Optics EU + solid-optics.com + + EMail: thijs@solid-optics.eu" + DESCRIPTION + "This MIB contains definition of the SNMP objects + and traps to interface with SO products." + + REVISION "202007030000Z" + DESCRIPTION + "RFurch minor adjustments" + +::= { enterprises 51628 } + +edfaMux OBJECT IDENTIFIER ::= { solidOptics 1 } +--moniMux OBJECT IDENTIFIER ::= { solidOptics 2 } + +--- +--- EdfaMux definitions +--- + +dcmDistance OBJECT-TYPE + SYNTAX Integer32(1..999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current dispersion in kilometers." +::= {edfaMux 1} + +preEdfaSeqTable OBJECT-TYPE + SYNTAX SEQUENCE OF PreEdfaSeq + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table for iterator" + ::= { edfaMux 2 } + +preEdfaSeqEntry OBJECT-TYPE + SYNTAX PreEdfaSeq + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Descriptive and Status Information for the pre EDFA." + INDEX { preIndex } +::= {preEdfaSeqTable 1} + +postEdfaSeqTable OBJECT-TYPE + SYNTAX SEQUENCE OF PostEdfaSeq + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table for iterator" + ::= { edfaMux 3 } + +postEdfaSeqEntry OBJECT-TYPE + SYNTAX PostEdfaSeq + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Descriptive and Status Information for the post EDFA." + INDEX { postIndex } +::= {postEdfaSeqTable 1} + +PreEdfaSeq ::= SEQUENCE { + preIndex Integer32, + prePowerGainValue OCTET STRING, + prePowerIn OCTET STRING, + prePowerOut OCTET STRING, + preTemperature OCTET STRING +} + +preIndex OBJECT-TYPE + SYNTAX Integer32 (0..100) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Column index." +::= { preEdfaSeqEntry 1} + +prePowerGainValue OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Gain value in dBm." +::= { preEdfaSeqEntry 2 } + +prePowerIn OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power in in dBm" +::= { preEdfaSeqEntry 3 } + +prePowerOut OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power out in dBm." +::= { preEdfaSeqEntry 4 } + + +preTemperature OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current temperature in degrees Celsius." +::= { preEdfaSeqEntry 5 } + +PostEdfaSeq ::= SEQUENCE { + postIndex Integer32, + postPowerGainValue OCTET STRING, + postPowerIn OCTET STRING, + postPowerOut OCTET STRING, + postTemperature OCTET STRING +} + +postIndex OBJECT-TYPE +SYNTAX Integer32 (0..100) +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION "Column index." +::= { postEdfaSeqEntry 1} + +postPowerGainValue OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Gain value in dBm." +::= { postEdfaSeqEntry 2 } + +postPowerIn OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power in in dBm" +::= { postEdfaSeqEntry 3 } + +postPowerOut OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power out in dBm." +::= { postEdfaSeqEntry 4 } + + +postTemperature OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current temperature in degrees Celsius." +::= { postEdfaSeqEntry 5 } + +-- conformance information + +edfaConformance OBJECT IDENTIFIER ::= { edfaMux 4 } + +edfaGroups OBJECT IDENTIFIER ::= { edfaConformance 1 } +edfaCompliances OBJECT IDENTIFIER ::= { edfaConformance 2 } + +-- compliance statements + + +edfaCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP SolidOptics EDFA devices" + + MODULE -- this module + MANDATORY-GROUPS { edfaGroup } + +-- here we can add optional groups! +-- GROUP edfaGroup +-- DESCRIPTION +-- "All EDFA values must be in this group" + + ::= { edfaCompliances 1 } + + +-- units of conformance + +-- groups + +edfaGroup OBJECT-GROUP + OBJECTS { + dcmDistance, prePowerGainValue, prePowerIn, prePowerOut, preTemperature, + postPowerGainValue, postPowerIn, postPowerOut, postTemperature + } + STATUS current + DESCRIPTION + "A collection of objects" + ::= { edfaGroups 1 } + +END |