diff options
Diffstat (limited to 'MIBS/siae/SIAE-RADIO-ENCRYPTION-MIB')
| -rw-r--r-- | MIBS/siae/SIAE-RADIO-ENCRYPTION-MIB | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/MIBS/siae/SIAE-RADIO-ENCRYPTION-MIB b/MIBS/siae/SIAE-RADIO-ENCRYPTION-MIB new file mode 100644 index 0000000..91ce7f4 --- /dev/null +++ b/MIBS/siae/SIAE-RADIO-ENCRYPTION-MIB @@ -0,0 +1,277 @@ +-- ---------------------------------------------------------------------------- +-- +-- SIAE MICROELETTRONICA s.p.a. +-- +-- Via Michelangelo Buonarroti, 21 +-- 20093 - Cologno Monzese +-- Milano +-- ITALY +-- +-- ---------------------------------------------------------------------------- +-- ---------------------------------------------------------------------------- + +SIAE-RADIO-ENCRYPTION-MIB + DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32 + FROM SNMPv2-SMI + RowStatus + FROM SNMPv2-TC + InterfaceIndex + FROM IF-MIB + siaeMib + FROM SIAE-TREE-MIB + AlarmStatus, AlarmSeverityCode + FROM SIAE-ALARM-MIB; + + radioEncrypt MODULE-IDENTITY + LAST-UPDATED "201507200000Z" + ORGANIZATION "SIAE MICROELETTRONICA spa" + CONTACT-INFO + "SIAE MICROELETTONICA s.p.a. + Via Michelangelo Buonarroti, 21 + 20093 - Cologno Monzese + Milano - ITALY + Phone : +39-02-27325-1 + E-mail: tbd@siaemic.com + " + DESCRIPTION + "SIAE's radio encryption MIB. + " + REVISION "201507200000Z" + DESCRIPTION + "Initial version 01.00.00 + " + ::= { siaeMib 96 } + +-------------------------------------------------------------------------------- +-- RADIO ECRYPTION GROUP +-------------------------------------------------------------------------------- +-- +-- This group is used to manage SIAE's proprietary radio encryption MIB. +-- Below the denomination 'radio encryption' will be abbreviated as ENCRYPT +-- +-------------------------------------------------------------------------------- + +------ Beginning -------------------------------------------------------------- + + rdEncryptMibVersion OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Numerical version of this module. + The string version of this MIB have the following format: + XX.YY.ZZ + so, for example, the value 1 should be interpreted as 00.00.01 + and the value 10001 should be interpreted as 01.00.01." + DEFVAL { 1 } + ::= {radioEncrypt 1} + +------ Begin of rdEncryptTable +-- + rdEncryptTable OBJECT-TYPE + SYNTAX SEQUENCE OF EncryptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table with SIAE's ENCRYPT entries." + ::= {radioEncrypt 2} + + rdEncryptTableEntry OBJECT-TYPE + SYNTAX EncryptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "SIAE's ENCRYPT entry. An ENCRYPT instance have the same index of + the relative radio link index. A row in this table is created by + the SNMP agent for each instance of radio link." + INDEX {rdEncryptIfIndex} + ::= {rdEncryptTable 1} + + EncryptEntry ::= + SEQUENCE { + rdEncryptIfIndex InterfaceIndex, + rdEncryptRowStatus RowStatus, + rdEncryptAdminStatus INTEGER, + rdEncryptAlgo INTEGER, + rdEncryptAlgoMode INTEGER, + rdEncryptKeyMode INTEGER, + rdEncryptKey OCTET STRING, + rdEncryptKeyLifeTime Integer32, + rdEncryptMismatchAlarm AlarmStatus + } + + rdEncryptIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value, greater than zero, for each ENCRYPT interface. + This object is identical to the ifIndex of the standard MIB-2 + ifTable. + SNMP agent accepts the value of this objects only if the + capability ifextCapabilityEncrypt is shown in ifextCapabilities + for the same ifIndex. + " + ::= {rdEncryptTableEntry 1} + + rdEncryptRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Status of this row of rdEncryptTable. A manager must set + this object in order to create an instance of ENCRYPT. + " + ::= {rdEncryptTableEntry 2} + + rdEncryptAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + disable (1), + enable (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The desired state of the ENCRYPT. This object can be set only + when the rdEncryptRowStatus of the ENCRYPT is active. + + When a managed system initializes, all ENCRYPT instance start with + rdEncryptAdminStatus in the disable(2) state, it's a default + state also. As a result of either explicit management + action or per configuration information retained by the + managed system, rdEncryptAdminStatus is then changed to the + enable (1) state (or remains in the disable(2) state). + + In order to use ENCRYPT, also rdEncryptSystemControl must be set to + start. + " + DEFVAL { disable } + ::= {rdEncryptTableEntry 3} + + rdEncryptAlgo OBJECT-TYPE + SYNTAX INTEGER { + aes128 (1), + aes256 (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The encryption algorithm. The key length depends on the choosen + algorithm. + " + DEFVAL { aes256 } + ::= {rdEncryptTableEntry 4} + + rdEncryptAlgoMode OBJECT-TYPE + SYNTAX INTEGER { + aesModeElectronicCodebook (1), + aesModeCipherBlockChaining (2), + aesModeCipherFeedback (3), + aesModeOutputFeedback (4), + aesModeCounter (5) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "AES encryption/decryption algorithm can be implemented in + five modes. The modes may be used in conjunction with any + symmetric key block cipher algorithm that is approved by a + Federal Information Processing Standard (FIPS). + The five modes are: + - Electronic Codebook (ECB) + - Cipher Block Chaining (CBC) + - Cipher Feedback (CFB), + - Output Feedback (OFB), + - and Counter (CTR) + Agents can accept only a subset of AES modes. + " + DEFVAL { aesModeCounter } + ::= {rdEncryptTableEntry 5} + + rdEncryptKeyMode OBJECT-TYPE + SYNTAX INTEGER { + manualEnteredKey (1), + automaticKeyGeneration (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object select between the Manually-entered key mode and + auto-generated key mode. Agent could not accept the value + automaticKeyGeneration if it don't support the automatic key + generation. + " + DEFVAL { manualEnteredKey } + ::= {rdEncryptTableEntry 6} + + rdEncryptKey OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(16|32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The key used for encryption. The length of the key depends on + rdEncryptAlgo. + " + DEFVAL { '00'H } + ::= {rdEncryptTableEntry 7} + + rdEncryptKeyLifeTime OBJECT-TYPE + SYNTAX Integer32 (1..1096) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The life time in day of the automatically generated key. + The range goes from one day to three years (considering one + leap year). + " + DEFVAL { 7 } + ::= {rdEncryptTableEntry 8} + + rdEncryptMismatchAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raised when local and remote configuration does not + match." + ::= {rdEncryptTableEntry 9} + +-- +------ End of rdEncryptTable + + rdEncryptSystemControl OBJECT-TYPE + SYNTAX INTEGER { + start(1), + shutdown(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative system control status requested by management + for the ENCRYPT feature. The value 'start'(1) indicates that all + resources required by ENCRYPT should be allocated and ENCRYPT + should be supported in the device on ports which shown the + specific capability. The value shutdown(2) indicates that ENCRYPT + should be shutdown in the device on all ports and all allocated + memory must be released." + ::= { radioEncrypt 3 } + + rdEncryptMismatchAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the severity associated to the rdEncryptMismatchAlarm + and enables/disables the trap generation on status change event." + DEFVAL {majorTrapEnable} + ::= { radioEncrypt 4 } + +END + + + + |