diff options
Diffstat (limited to 'MIBS/siae/SIAE-QUEUE-DEPTH-MIB')
| -rw-r--r-- | MIBS/siae/SIAE-QUEUE-DEPTH-MIB | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/MIBS/siae/SIAE-QUEUE-DEPTH-MIB b/MIBS/siae/SIAE-QUEUE-DEPTH-MIB new file mode 100644 index 0000000..404c161 --- /dev/null +++ b/MIBS/siae/SIAE-QUEUE-DEPTH-MIB @@ -0,0 +1,204 @@ +-- ---------------------------------------------------------------------------- +-- +-- SIAE MICROELETTRONICA s.p.a. +-- +-- Via Michelangelo Buonarroti, 21 +-- 20093 - Cologno Monzese +-- Milano +-- ITALY +-- +-- ---------------------------------------------------------------------------- +-- ---------------------------------------------------------------------------- + + SIAE-QUEUE-DEPTH-MIB + DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, + DisplayString + FROM SNMPv2-TC + siaeMib + FROM SIAE-TREE-MIB + AlarmStatus, AlarmSeverityCode + FROM SIAE-ALARM-MIB; + + queueDepth MODULE-IDENTITY + LAST-UPDATED "201405200000Z" + ORGANIZATION "SIAE MICROELETTRONICA spa" + CONTACT-INFO + "SIAE MICROELETTONICA s.p.a. + Via Michelangelo Buonarroti, 21 + 20093 - Cologno Monzese + Milano - ITALY + Phone : +39-02-27325-1 + E-mail: tbd@siaemic.com + " + DESCRIPTION + "Queue depth management for SIAE equipments. + " + REVISION "201405200000Z" + DESCRIPTION + "Initial version 01.00.00. + " + ::= { siaeMib 84 } + +---------------------------------------------------------------------------- +-- Textual Conventions +---------------------------------------------------------------------------- + +DisplayString1024 ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1024a" + STATUS current + DESCRIPTION + "Represents textual information taken from the NVT ASCII + character set, as defined in pages 4, 10-11 of RFC 854. + + To summarize RFC 854, the NVT ASCII repertoire specifies: + + - the use of character codes 0-127 (decimal) + + - the graphics characters (32-126) are interpreted as + US ASCII + + - NUL, LF, CR, BEL, BS, HT, VT and FF have the special + meanings specified in RFC 854 + + - the other 25 codes have no standard interpretation + + - the sequence 'CR LF' means newline + + - the sequence 'CR NUL' means carriage-return + + - an 'LF' not preceded by a 'CR' means moving to the + same column on the next line. + + - the sequence 'CR x' for any x other than LF or NUL is + illegal. (Note that this also means that a string may + end with either 'CR LF' or 'CR NUL', but not with CR.) + + Any object defined using this syntax may not exceed 255 + characters in length." + SYNTAX OCTET STRING (SIZE (0..1024)) + +---------------------------------------------------------------------------- +-- MIB objects +---------------------------------------------------------------------------- + +------ Beginning ------------------------------------------------------------- + + queueDepthMibVersion OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Numerical version of this module. + The string version of this MIB have the following format: + XX.YY.ZZ + so, for example, the value 1 should be interpreted as 00.00.01 + and the value 10001 should be interpreted as 01.00.01." + ::= {queueDepth 1} + +------- Begin of qdProfileTable +-- + qdProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF QueueDepthProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of queue depth profile entries. This table is useful + to show to the manager available profiles and its feature." + ::= {queueDepth 2} + + qdProfileEntry OBJECT-TYPE + SYNTAX QueueDepthProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing information about each queue depth settings + realized by a profile." + INDEX {qdProfileIndex} + ::= {qdProfileTable 1} + + QueueDepthProfileEntry ::= + SEQUENCE { + qdProfileIndex Integer32, + qdProfileName DisplayString, + qdProfileDescription DisplayString1024 + } + + qdProfileIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value, greater than zero, for each queue depth profile. + It is recommended that values are assigned contiguously + starting from 1." + ::= {qdProfileEntry 1} + + qdProfileName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A brief description of the settings realized by this profile." + ::= {qdProfileEntry 2} + + qdProfileDescription OBJECT-TYPE + SYNTAX DisplayString1024 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A detailed description of the settings realized by this profile." + ::= {qdProfileEntry 3} + +-- +------- End of qdProfileTable + + qdProfileSelect OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object selects a queue depth profile from qdProfileTable + to be applied after a cold restart." + DEFVAL { 1 } + ::= {queueDepth 3} + + qdActualProfile OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object shows the actual queue profile in use. + The object content is set upon restart equal to qdProfileSelect + and is never changed, since a new profile will be applied after + a next cold restart. The value 0 means the actual profile is + unknown." + ::= {queueDepth 4} + + qdProfileMismatchAlarm OBJECT-TYPE + SYNTAX AlarmStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This alarm is raise when the actual profile is not equal to the + selected profile." + ::= {queueDepth 5} + + qdProfileMismatchAlarmSeverityCode OBJECT-TYPE + SYNTAX AlarmSeverityCode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the severity associated to the qdProfileMismatchAlarm + and enables/disables the trap generation on status change event." + DEFVAL {warningTrapEnable} + ::= {queueDepth 6} + +------ End group ------------------------------------------------------------- + +END |