diff options
Diffstat (limited to 'MIBS/rs')
| -rw-r--r-- | MIBS/rs/IRT-COMMONVARBINDS-MIB | 135 | ||||
| -rw-r--r-- | MIBS/rs/IRT-DVBT-SINGLETRANSMITTER-MIB | 918 | ||||
| -rw-r--r-- | MIBS/rs/IRT-TRANSMITTER-SMI-MIB | 268 | ||||
| -rw-r--r-- | MIBS/rs/RS-COMMON-MIB | 144 | ||||
| -rw-r--r-- | MIBS/rs/RS-XX8000-COMMON-MIB | 2533 | ||||
| -rw-r--r-- | MIBS/rs/RS-XX8000-DVB-TX-MIB | 7049 |
6 files changed, 11047 insertions, 0 deletions
diff --git a/MIBS/rs/IRT-COMMONVARBINDS-MIB b/MIBS/rs/IRT-COMMONVARBINDS-MIB new file mode 100644 index 0000000..3db1487 --- /dev/null +++ b/MIBS/rs/IRT-COMMONVARBINDS-MIB @@ -0,0 +1,135 @@ +-- +-- IRT-COMMONVARBINDS-MIB.my +-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 +-- Thursday, May 03, 2007 at 19:14:24 +-- + + IRT-COMMONVARBINDS-MIB DEFINITIONS ::= BEGIN + + IMPORTS + common + FROM IRT-TRANSMITTER-SMI-MIB + OBJECT-GROUP, MODULE-COMPLIANCE + FROM SNMPv2-CONF + Unsigned32, Counter32, OBJECT-TYPE, MODULE-IDENTITY + FROM SNMPv2-SMI + DateAndTime + FROM SNMPv2-TC; + + + -- 1.3.6.1.4.1.19831.1.1.7.1 + commonVarbinds MODULE-IDENTITY + LAST-UPDATED "200705041400Z" -- May 04, 2007 at 14:00 GMT + ORGANIZATION + "IRT for WORKING-GROUP-TC-MIB" + CONTACT-INFO + "Contact-info: + + Andreas Metz + + Institut fuer Rundfunktechnik GmbH + Broadcast Networks and Servers (SN) + + Floriansmuehlstr.60 + 80939 Munich + Germany + + Phone: +49 89 32399 325 + Fax: +49 89 32399 354 + " + DESCRIPTION + "Description: + + Common values" + REVISION "200705041400Z" -- May 04, 2007 at 14:00 GMT + DESCRIPTION + "change MODULE-COMPLIANCE" + REVISION "200612201400Z" -- December 20, 2006 at 14:00 GMT + DESCRIPTION + "corrections" + REVISION "200609211400Z" -- September 21, 2006 at 14:00 GMT + DESCRIPTION + "Adding Compliance Statement" + REVISION "200609191400Z" -- September 19, 2006 at 14:00 GMT + DESCRIPTION + "Channing commonVarbins form 7.2 to 7.1" + REVISION "200609071400Z" -- September 07, 2006 at 14:00 GMT + DESCRIPTION + "Relocation of the TC-MIB from the standard OID area at IEC into the private OID area of the IRT" + ::= { common 1 } + + + + +-- +-- Node definitions +-- + + -- 1.3.6.1.4.1.19831.1.1.7.1.1 + objectGroup OBJECT-GROUP + OBJECTS { eventTimeStamp, eventPriority, eventCounter, mibRelease } + STATUS current + DESCRIPTION + "Description. Common objects" + ::= { commonVarbinds 1 } + + +-- Event timestamp in UTC + -- 1.3.6.1.4.1.19831.1.1.7.1.2 + eventTimeStamp OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description.Event timestamp in UTC" + ::= { commonVarbinds 2 } + + +-- Event priority level + -- 1.3.6.1.4.1.19831.1.1.7.1.3 + eventPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description.Event priority level" + ::= { commonVarbinds 3 } + + +-- Event counter + -- 1.3.6.1.4.1.19831.1.1.7.1.4 + eventCounter OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description.Event counter" + ::= { commonVarbinds 4 } + + + -- 1.3.6.1.4.1.19831.1.1.7.1.5 + mibRelease OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description.The current MIB version" + ::= { commonVarbinds 5 } + + + -- 1.3.6.1.4.1.19831.1.1.7.1.6 + commonVarbindsCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance Statement" + MODULE -- this module + MANDATORY-GROUPS { objectGroup } + ::= { commonVarbinds 6 } + + + + END + +-- +-- IRT-COMMONVARBINDS-MIB.my +-- diff --git a/MIBS/rs/IRT-DVBT-SINGLETRANSMITTER-MIB b/MIBS/rs/IRT-DVBT-SINGLETRANSMITTER-MIB new file mode 100644 index 0000000..de9a7a3 --- /dev/null +++ b/MIBS/rs/IRT-DVBT-SINGLETRANSMITTER-MIB @@ -0,0 +1,918 @@ +-- +-- IRT-DVBT-SINGLETRANSMITTER-MIB.my +-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 +-- Thursday, May 03, 2007 at 21:05:21 +-- + + IRT-DVBT-SINGLETRANSMITTER-MIB DEFINITIONS ::= BEGIN + + IMPORTS + eventTimeStamp, eventPriority, eventCounter, mibRelease + FROM IRT-COMMONVARBINDS-MIB + dvbT, Input1Input2, SelectManualAuto, SelectOnOff, PresentNotPresent, + FaultOK, WarningOK, OkNotOk, MuteOk, SFNMFN, + LocalRemote + FROM IRT-TRANSMITTER-SMI-MIB + OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP + FROM SNMPv2-CONF + sysDescr, sysName, sysLocation + FROM SNMPv2-MIB + Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE + FROM SNMPv2-SMI + DisplayString, TruthValue + FROM SNMPv2-TC; + + + -- 1.3.6.1.4.1.19831.1.1.1.1 + dvbSingleTransmitter MODULE-IDENTITY + LAST-UPDATED "200705041400Z" -- May 04, 2007 at 14:00 GMT + ORGANIZATION + "IRT for WORKING-GROUP-TC-MIB" + CONTACT-INFO + "Contact-info. + + Andreas Metz + + Institut fuer Rundfunktechnik GmbH + Broadcast Networks and Servers (SN) + + Floriansmuehlstr.60 + 80939 Munich + Germany + + Phone: +49 89 32399 325 + Fax: +49 89 32399 354 + " + DESCRIPTION + "DVB Single Transmitter + + branch definition + + 1st level + + events OBJECT IDENTIFIER ::= { dvbSingleTransmitter 0 } + dvbSTGeneral OBJECT IDENTIFIER ::= { dvbSingleTransmitter 1 } + dvbSTEventEnable OBJECT IDENTIFIER ::= { dvbSingleTransmitter 2 } + dvbSTEventPriority OBJECT IDENTIFIER ::= { dvbSingleTransmitter 3 } + groups OBJECT IDENTIFIER ::= { dvbSingleTransmitter 4 } + + 2nd level + + dvbSTEventEnableGeneral OBJECT IDENTIFIER ::= { dvbSTEventEnable 1 } + dvbSTEventPriorityGeneral OBJECT IDENTIFIER ::= { dvbSTEventPriority 1 } + + end branch + + " + REVISION "200705041400Z" -- May 04, 2007 at 14:00 GMT + DESCRIPTION + "change SFNMode,LocalMode (description) and Module-COMPLIANCE" + REVISION "200612201400Z" -- December 20, 2006 at 14:00 GMT + DESCRIPTION + "Corrections" + REVISION "200609211400Z" -- September 21, 2006 at 14:00 GMT + DESCRIPTION + "Adding Compliance Statement" + REVISION "200609191400Z" -- September 19, 2006 at 14:00 GMT + DESCRIPTION + "Correcting Imports" + REVISION "200609071400Z" -- September 07, 2006 at 14:00 GMT + DESCRIPTION + "Relocation of the TC-MIB from the standard OID area at IEC into the private OID area of the IRT" + ::= { dvbT 1 } + + + + +-- +-- Node definitions +-- + +-- dvb single transmitter events + -- 1.3.6.1.4.1.19831.1.1.1.1.0 + dvbEventsST OBJECT IDENTIFIER ::= { dvbSingleTransmitter 0 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.1 + dvbSTInputPreselectionEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTInputPreselection } + STATUS current + DESCRIPTION + "Description.dvbSTInputPreselection notification" + ::= { dvbEventsST 1 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.2 + dvbSTInputAutomaticEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTInputAutomatic } + STATUS current + DESCRIPTION + "Description. dvbSTInputAutomatic notification" + ::= { dvbEventsST 2 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.3 + dvbSTTransmitterOpModeEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTTransmitterOpMode } + STATUS current + DESCRIPTION + "Description. dvbSTTransmitterOpMode notification" + ::= { dvbEventsST 3 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.4 + dvbSTRFPresentEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTRFPresent } + STATUS current + DESCRIPTION + "Description. dvbSTRFPresent notification" + ::= { dvbEventsST 4 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.5 + dvbSTResetFaultEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTResetFault } + STATUS obsolete + DESCRIPTION + "Notification is inctive! + + Description.dvbSTResetFault notification" + ::= { dvbEventsST 5 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.6 + dvbSTFaultEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTFault } + STATUS current + DESCRIPTION + "Description. dvbSTFault notification" + ::= { dvbEventsST 6 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.7 + dvbSTWarningEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTWarning } + STATUS current + DESCRIPTION + "Description. dvbSTWarning notification" + ::= { dvbEventsST 7 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.8 + dvbSTInput1OKEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTInput1OK } + STATUS current + DESCRIPTION + "Description.vdvbSTInput1OK notification" + ::= { dvbEventsST 8 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.9 + dvbSTInput2OKEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTInput2OK } + STATUS current + DESCRIPTION + "Description.dvbSTInput2OK notification" + ::= { dvbEventsST 9 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.10 + dvbSTLocalModeEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTLocalMode } + STATUS current + DESCRIPTION + "Description. dvbSTLocalMode notification" + ::= { dvbEventsST 10 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.11 + dvbSTActiveInputEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTActiveInput } + STATUS current + DESCRIPTION + "Description. dvbSTActiveInput notification" + ::= { dvbEventsST 11 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.12 + dvbSTSFNModeEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTSFNMode } + STATUS current + DESCRIPTION + "Description. dvbSTSFNMode notification" + ::= { dvbEventsST 12 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.13 + dvbSTRefFaultEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTRefFault } + STATUS current + DESCRIPTION + "Description. dvbSTRefFault notification" + ::= { dvbEventsST 13 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.14 + dvbSTMuteEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTMute } + STATUS current + DESCRIPTION + "Description. dvbSTMute notification" + ::= { dvbEventsST 14 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.15 + dvbSTFaultMIPEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTFaultMIP } + STATUS current + DESCRIPTION + "Description. dvbSTFaultMIP notification" + ::= { dvbEventsST 15 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.0.16 + dvbSTStuffingModeEvent NOTIFICATION-TYPE + OBJECTS { sysDescr, sysName, sysLocation, eventTimeStamp, eventPriority, + eventCounter, dvbSTStuffingMode } + STATUS current + DESCRIPTION + "Description. dvbSTSStuffingMode notification" + ::= { dvbEventsST 16 } + + +-- dvb single transmitter general + -- 1.3.6.1.4.1.19831.1.1.1.1.1 + dvbSTGeneral OBJECT IDENTIFIER ::= { dvbSingleTransmitter 1 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.1 + dvbSTInputPreselection OBJECT-TYPE + SYNTAX Input1Input2 + UNITS " " + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Single transmitter. Preselection input of single transmitter + + (0) undefined + (1) Input 1 + (2) Input 2" + ::= { dvbSTGeneral 1 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.2 + dvbSTInputAutomatic OBJECT-TYPE + SYNTAX SelectManualAuto + UNITS " " + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Single transmitter. Input selection mode of single transmitter: manual or automatic + + (0) undefined + (1) manual + (2) automatic" + ::= { dvbSTGeneral 2 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.3 + dvbSTTransmitterOpMode OBJECT-TYPE + SYNTAX SelectOnOff + UNITS " " + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Single transmitter. Transmitter control of single transmitter + + (0) undefined + (1) ON + (2) OFF" + ::= { dvbSTGeneral 3 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.4 + dvbSTRFPresent OBJECT-TYPE + SYNTAX PresentNotPresent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Single transmitter. Describes if the output power is present + + (0) undefined + (1) present + (2) not present + " + ::= { dvbSTGeneral 4 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.5 + dvbSTResetFault OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Description. Massage is inctive! + + + Single transmitter. Reset fault. Trigger for reset the sum fault + + <1> + + 1: reset sum fault + + " + ::= { dvbSTGeneral 5 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.6 + dvbSTFault OBJECT-TYPE + SYNTAX FaultOK + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Single transmitter. Fault state of transmitter + + (0) undefined + (1) fault + (2) ok" + ::= { dvbSTGeneral 6 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.7 + dvbSTWarning OBJECT-TYPE + SYNTAX WarningOK + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Single transmitter. Warning state of single transmitter + + (0) undefined + (1) warning + (2) ok" + ::= { dvbSTGeneral 7 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.8 + dvbSTInput1OK OBJECT-TYPE + SYNTAX OkNotOk + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Single transmitter.Describes if the input signal at the input 1 of single transmitter is ok + + (0) undefined + (1) signal ok + (2) signal is not ok " + ::= { dvbSTGeneral 8 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.9 + dvbSTInput2OK OBJECT-TYPE + SYNTAX OkNotOk + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes if the input signal at the input 2 of single transmitters is ok + + (0) undefined + (1) signal ok + (2) signal is not ok " + ::= { dvbSTGeneral 9 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.10 + dvbSTLocalMode OBJECT-TYPE + SYNTAX LocalRemote + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Single transmitter. Local mode + + (0) undefined + (1) local + (2) remote" + ::= { dvbSTGeneral 10 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.11 + dvbSTActiveInput OBJECT-TYPE + SYNTAX INTEGER + { + undefined(0), + input1(1), + input2(2), + seamless(3), + hmHierarchicalModulation(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Single transmitter.Active input of the single transmitter + + " + ::= { dvbSTGeneral 11 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.12 + dvbSTSFNMode OBJECT-TYPE + SYNTAX SFNMFN + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Single transmitter. SFN mode of single transmitter + + (0) undefined + (1) SFN + (2) MFN + + + " + ::= { dvbSTGeneral 12 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.13 + dvbSTRefFault OBJECT-TYPE + SYNTAX FaultOK + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Single transmitter.Fault state of the GPS input or the reference frequency of single transmitter + + (0) undefined + (1) fault + (2) ok" + ::= { dvbSTGeneral 13 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.14 + dvbSTMute OBJECT-TYPE + SYNTAX MuteOk + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Single transmitter. Mute state of single transmitter + + (0) undefined + (1) mute + (2) ok" + ::= { dvbSTGeneral 14 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.15 + dvbSTFaultMIP OBJECT-TYPE + SYNTAX FaultOK + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "MIP fault state of single transmitter + + (0) undefined + (1) fault + (2) ok" + ::= { dvbSTGeneral 15 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.1.16 + dvbSTStuffingMode OBJECT-TYPE + SYNTAX SelectOnOff + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Stuffing state of single transmitter + + (0) undefined + (1) ON + (2) OFF " + ::= { dvbSTGeneral 16 } + + +-- dvb single transmitter + -- 1.3.6.1.4.1.19831.1.1.1.1.2 + dvbSTEventEnable OBJECT IDENTIFIER ::= { dvbSingleTransmitter 2 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1 + dvbSTEventEnableGeneral OBJECT IDENTIFIER ::= { dvbSTEventEnable 1 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.1 + dvbSTInputPreselectionEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTInputPreselection event" + ::= { dvbSTEventEnableGeneral 1 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.2 + dvbSTInputAutomaticEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTInputAutomatic event" + ::= { dvbSTEventEnableGeneral 2 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.3 + dvbSTTransmitterOpModeEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTTransmitterOpMode event" + ::= { dvbSTEventEnableGeneral 3 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.4 + dvbSTRFPresentEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTRFPresent event" + ::= { dvbSTEventEnableGeneral 4 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.5 + dvbSTResetFaultEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Massage ist inactive! + + Description. Enable/Disable switch for dvbSTResetFault event" + ::= { dvbSTEventEnableGeneral 5 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.6 + dvbSTFaultEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTFault event" + ::= { dvbSTEventEnableGeneral 6 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.7 + dvbSTWarningEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTWarning event" + ::= { dvbSTEventEnableGeneral 7 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.8 + dvbSTInput1OKEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTInput1OK event" + ::= { dvbSTEventEnableGeneral 8 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.9 + dvbSTInput2OKEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTInput2OK event" + ::= { dvbSTEventEnableGeneral 9 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.10 + dvbSTLocalModeEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTLocalMode event" + ::= { dvbSTEventEnableGeneral 10 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.11 + dvbSTActiveInputEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTActiveInput event" + ::= { dvbSTEventEnableGeneral 11 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.12 + dvbSTSFNModeEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTSFNMode event" + ::= { dvbSTEventEnableGeneral 12 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.13 + dvbSTRefFaultEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTRefFault event" + ::= { dvbSTEventEnableGeneral 13 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.14 + dvbSTMuteEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTMute event" + ::= { dvbSTEventEnableGeneral 14 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.15 + dvbSTFaultMIPEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTFaultMIP event" + ::= { dvbSTEventEnableGeneral 15 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.2.1.16 + dvbSTStuffingModeEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Enable/Disable switch for dvbSTStuffingMode event" + ::= { dvbSTEventEnableGeneral 16 } + + +-- dvb single transmitter event priority + -- 1.3.6.1.4.1.19831.1.1.1.1.3 + dvbSTEventPriority OBJECT IDENTIFIER ::= { dvbSingleTransmitter 3 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1 + dvbSTEventPriorityGeneral OBJECT IDENTIFIER ::= { dvbSTEventPriority 1 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.1 + dvbSTInputPreselectionPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTInputPreselection event" + ::= { dvbSTEventPriorityGeneral 1 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.2 + dvbSTInputAutomaticPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTInputAutomatic event" + ::= { dvbSTEventPriorityGeneral 2 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.3 + dvbSTTransmitterOpModePriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTTransmitterOpMode event" + ::= { dvbSTEventPriorityGeneral 3 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.4 + dvbSTRFPresentPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTRFPresent event" + ::= { dvbSTEventPriorityGeneral 4 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.5 + dvbSTResetFaultPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Massage ist inactive! + + + Description. Priority for dvbSTResetFault event" + ::= { dvbSTEventPriorityGeneral 5 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.6 + dvbSTFaultPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTFault event" + ::= { dvbSTEventPriorityGeneral 6 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.7 + dvbSTWarningPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTWarning event" + ::= { dvbSTEventPriorityGeneral 7 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.8 + dvbSTInput1OKPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTInput1OK event" + ::= { dvbSTEventPriorityGeneral 8 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.9 + dvbSTInput2OKPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTInput2OK event" + ::= { dvbSTEventPriorityGeneral 9 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.10 + dvbSTLocalModePriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTLocalMode event" + ::= { dvbSTEventPriorityGeneral 10 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.11 + dvbSTActiveInputPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTActiveInput event" + ::= { dvbSTEventPriorityGeneral 11 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.12 + dvbSTSFNModePriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTSFNMode event" + ::= { dvbSTEventPriorityGeneral 12 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.13 + dvbSTRefFaultPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTRefFault event" + ::= { dvbSTEventPriorityGeneral 13 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.14 + dvbSTMutePriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTMute event" + ::= { dvbSTEventPriorityGeneral 14 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.15 + dvbSTFaultMIPPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTFaultMIP event" + ::= { dvbSTEventPriorityGeneral 15 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.3.1.16 + dvbSTStuffingModePriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description.Priority for dvbSTStuffingMode event" + ::= { dvbSTEventPriorityGeneral 16 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.4 + groupST OBJECT IDENTIFIER ::= { dvbSingleTransmitter 4 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.4.1 + objectGroupST OBJECT-GROUP + OBJECTS { dvbSTInputPreselection, dvbSTInputAutomatic, dvbSTTransmitterOpMode, dvbSTRFPresent, dvbSTFault, + dvbSTWarning, dvbSTInput1OK, dvbSTInput2OK, dvbSTLocalMode, dvbSTActiveInput, + dvbSTSFNMode, dvbSTRefFault, dvbSTMute, dvbSTFaultMIP, dvbSTStuffingMode, + dvbSTInputPreselectionEnable, dvbSTInputAutomaticEnable, dvbSTTransmitterOpModeEnable, dvbSTRFPresentEnable, dvbSTFaultEnable, + dvbSTWarningEnable, dvbSTInput1OKEnable, dvbSTInput2OKEnable, dvbSTLocalModeEnable, dvbSTActiveInputEnable, + dvbSTSFNModeEnable, dvbSTRefFaultEnable, dvbSTMuteEnable, dvbSTFaultMIPEnable, dvbSTStuffingModeEnable, + dvbSTInputPreselectionPriority, dvbSTInputAutomaticPriority, dvbSTTransmitterOpModePriority, dvbSTRFPresentPriority, dvbSTFaultPriority, + dvbSTWarningPriority, dvbSTFaultMIPPriority, dvbSTMutePriority, dvbSTRefFaultPriority, dvbSTSFNModePriority, + dvbSTStuffingModePriority, dvbSTInput1OKPriority, dvbSTInput2OKPriority, dvbSTLocalModePriority, dvbSTActiveInputPriority + } + STATUS current + DESCRIPTION + "Description. dvb single transmitter objects" + ::= { groupST 1 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.4.2 + eventGroupST NOTIFICATION-GROUP + NOTIFICATIONS { dvbSTInputPreselectionEvent, dvbSTInputAutomaticEvent, dvbSTTransmitterOpModeEvent, dvbSTRFPresentEvent, dvbSTFaultEvent, + dvbSTWarningEvent, dvbSTInput1OKEvent, dvbSTInput2OKEvent, dvbSTLocalModeEvent, dvbSTActiveInputEvent, + dvbSTSFNModeEvent, dvbSTRefFaultEvent, dvbSTStuffingModeEvent, dvbSTMuteEvent, dvbSTFaultMIPEvent + } + STATUS current + DESCRIPTION + "Description. dvb single transmitter events" + ::= { groupST 2 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.4.3 + objectGroupSTobsolete OBJECT-GROUP + OBJECTS { dvbSTResetFault, dvbSTResetFaultEnable, dvbSTResetFaultPriority } + STATUS obsolete + DESCRIPTION + "Description. Inactive objects" + ::= { groupST 3 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.4.4 + eventGroupSTobsolete NOTIFICATION-GROUP + NOTIFICATIONS { dvbSTResetFaultEvent } + STATUS obsolete + DESCRIPTION + "Description. Inactive notifications" + ::= { groupST 4 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.5 + complianceST OBJECT IDENTIFIER ::= { dvbSingleTransmitter 5 } + + + -- 1.3.6.1.4.1.19831.1.1.1.1.5.1 + dvbSingleTransmitterCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance Statement" + MODULE -- this module + MANDATORY-GROUPS { objectGroupST, eventGroupST } + ::= { complianceST 1 } + + + + END + +-- +-- IRT-DVBT-SINGLETRANSMITTER-MIB.my +-- diff --git a/MIBS/rs/IRT-TRANSMITTER-SMI-MIB b/MIBS/rs/IRT-TRANSMITTER-SMI-MIB new file mode 100644 index 0000000..26f815a --- /dev/null +++ b/MIBS/rs/IRT-TRANSMITTER-SMI-MIB @@ -0,0 +1,268 @@ +-- +-- IRT-TRANSMITTER-SMI-MIB.my +-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 +-- Thursday, May 03, 2007 at 17:54:59 +-- + + IRT-TRANSMITTER-SMI-MIB DEFINITIONS ::= BEGIN + + IMPORTS + enterprises, MODULE-IDENTITY + FROM SNMPv2-SMI + TEXTUAL-CONVENTION + FROM SNMPv2-TC; + + + -- 1.3.6.1.4.1.19831 + irt MODULE-IDENTITY + LAST-UPDATED "200705041400Z" -- May 04, 2007 at 14:00 GMT + ORGANIZATION + "IRT for WORKING-GROUP-TC-MIB" + CONTACT-INFO + "Contact-info: + + Andreas Metz + + Institut fuer Rundfunktechnik GmbH + Broadcast Networks and Servers (SN) + + Floriansmuehlstr.60 + 80939 Munich + Germany + + Phone: +49 89 32399 325 + Fax: +49 89 32399 354 + " + DESCRIPTION + "*************************************************** + Description: IRT-TRANSMITTER-SMI-MIB General structure + + This MIB defines the structure of a SNMP-Agent + for all kinds of reserve Transmitters + + PROJECT: TC-MIB - TRANSMITTER-CONTROL-MIB + OID: 1.3.6.1.4.1.19831 + FILE: IRT-TRANSMITTER-SMI-MIB.* + AUTHOR: Ludmilla Leidag and Andreas Metz + for WORKING-GROUP-TC-MIB + + + ***************************************************" + REVISION "200705041400Z" -- May 04, 2007 at 14:00 GMT + DESCRIPTION + "change LocalRemote + add SFNMFN + " + REVISION "200612201400Z" -- December 20, 2006 at 14:00 GMT + DESCRIPTION + "Correction" + REVISION "200609071400Z" -- September 07, 2006 at 14:00 GMT + DESCRIPTION + "Relocation of the TC-MIB from the standard OID area at IEC into the private OID area of the IRT " + ::= { enterprises 19831 } + + + +-- +-- Textual conventions +-- + + SelectManualAuto ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description. Auto/Manual selection" + SYNTAX INTEGER + { + undefined(0), + manual(1), + automatic(2) + } + + SelectOnOff ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description. On/Off selection" + SYNTAX INTEGER + { + undefined(0), + on(1), + off(2) + } + + Input1Input2 ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description.Input1/Input2" + SYNTAX INTEGER + { + undefined(0), + input1(1), + input2(2) + } + + OkNotOk ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description.OK/NotOK" + SYNTAX INTEGER + { + undefined(0), + ok(1), + notok(2) + } + + FaultOK ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description.Fault/OK" + SYNTAX INTEGER + { + undefined(0), + fault(1), + ok(2) + } + + WarningOK ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description.Warning/OK" + SYNTAX INTEGER + { + undefined(0), + warning(1), + ok(2) + } + + LocalRemote ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description.Local/Remote" + SYNTAX INTEGER + { + undefined(0), + local(1), + remote(2) + } + + MuteOk ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description. Mute/OK" + SYNTAX INTEGER + { + undefined(0), + mute(1), + ok(2) + } + + ReadyNotReady ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description. Ready/Not ready" + SYNTAX INTEGER + { + undefined(0), + ready(1), + notready(2) + } + + ExecutedNotExecuted ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description. Executed/Not Executed" + SYNTAX INTEGER + { + undefined(0), + executed(1), + notexecuted(2) + } + + PresentNotPresent ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description. Present/NotPresent" + SYNTAX INTEGER + { + undefined(0), + present(1), + notpresent(2) + } + + SFNMFN ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description: SFN/MFN Mode" + SYNTAX INTEGER + { + undefined(0), + sfn(1), + mfn(2) + } + + +-- +-- Node definitions +-- + +-- Broadcast + -- 1.3.6.1.4.1.19831.1 + broadcast OBJECT IDENTIFIER ::= { irt 1 } + + +-- Transmitter + -- 1.3.6.1.4.1.19831.1.1 + transmitter OBJECT IDENTIFIER ::= { broadcast 1 } + + +-- Digital videobroadcast terrestrial + -- 1.3.6.1.4.1.19831.1.1.1 + dvbT OBJECT IDENTIFIER ::= { transmitter 1 } +-- List of assigned devices +-- +-- dvbSingleTransmitter OBJECT IDENTIFIER ::= { dvbT 1 } +-- dvbActiveReserve OBJECT IDENTIFIER ::= { dvbT 2 } +-- dvbPassiveReserve OBJECT IDENTIFIER ::= { dvbT 3 } +-- dvbDualDrive OBJECT IDENTIFIER ::= { dvbT 4 } +-- dvbnPlus1 OBJECT IDENTIFIER ::= { dvbT 5 } +-- dvbCommon OBJECT IDENTIFIER ::= { dvbT 255 } + +-- Digital audiobroadcast + -- 1.3.6.1.4.1.19831.1.1.2 + dab OBJECT IDENTIFIER ::= { transmitter 2 } +-- List of assigned devices +-- +-- dabSingleTransmitter OBJECT IDENTIFIER ::= { dab 1 } +-- dabActiveReserve OBJECT IDENTIFIER ::= { dab 2 } +-- dabPassiveReserve OBJECT IDENTIFIER ::= { dab 3 } +-- dabDualDrive OBJECT IDENTIFIER ::= { dab 4 } +-- dabnPlus1 OBJECT IDENTIFIER ::= { dab 5 } +-- dabCommon OBJECT IDENTIFIER ::= { dab 255 } + +-- FM transmitters + -- 1.3.6.1.4.1.19831.1.1.3 + fm OBJECT IDENTIFIER ::= { transmitter 3 } +-- List of assigned devices +-- +-- fmSingleTransmitter OBJECT IDENTIFIER ::= { fm 1 } +-- fmActiveReserve OBJECT IDENTIFIER ::= { fm 2 } +-- fmPassiveReserve OBJECT IDENTIFIER ::= { fm 3 } +-- fmDualDrive OBJECT IDENTIFIER ::= { fm 4 } +-- fmnPlus1 OBJECT IDENTIFIER ::= { fm 5 } +-- fmCommon OBJECT IDENTIFIER ::= { fm 255 } + +-- Digital radio mondiale + -- 1.3.6.1.4.1.19831.1.1.4 + drm OBJECT IDENTIFIER ::= { transmitter 4 } + + +-- Common values for all transmittertypes + -- 1.3.6.1.4.1.19831.1.1.7 + common OBJECT IDENTIFIER ::= { transmitter 7 } +-- Common values used by all transmittertypes (eg special Varbinds) + + + END + +-- +-- IRT-TRANSMITTER-SMI-MIB.my +-- diff --git a/MIBS/rs/RS-COMMON-MIB b/MIBS/rs/RS-COMMON-MIB new file mode 100644 index 0000000..070bfb3 --- /dev/null +++ b/MIBS/rs/RS-COMMON-MIB @@ -0,0 +1,144 @@ +-- ********************************************************************** +-- ********************************************************************** +-- ** +-- ** COPYRIGHT (c) 2006 Rohde & Schwarz GmbH & Co. KG +-- ** Muehldorfstrasse 15 +-- ** R & S 81671 Muenchen +-- ** +-- ** - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +-- ** +-- ** MODULE RS-COMMON-MIB.my +-- ** +-- ** DESCRIPTION Rohde & Schwarz common SNMP mib +-- ** +-- ** HISTORY 06/24/2005 Christian Hoelzl +-- ** first version +-- ** +-iso(1) +-- ** +-org(3) +-- ** +-dod(6) +-- ** +-internet(1) +-- ** +-private(4) +-- ** +-enterprises(1) +-- ** +-rs(2566) +-- ** +-rsCommon(123) +-- ** +-rsProduct(127) +-- ** | +-rsProdBroadcast(1) +-- ** | +-rsProdBroadcastMeasurement(1) +-- ** | +-rsProdBroadcastTransmitter(2) +-- ** | +-- ** +-rsRequirements(131) +-- ** +-rsExperimental(137) +-- ** +-rsCapabilities(139) +-- ** +-rsRegistration(149) +-- ** +-rsRegModules(1) +-- ** +-rsRegBroadcast(2) +-- ** +-rsRegBroadcastMeasurement(1) +-- ** +-rsRegBroadcastTransmitter(2) +-- ** +-- ** +-- ********************************************************************** +-- ********************************************************************** + + RS-COMMON-MIB DEFINITIONS ::= BEGIN + + IMPORTS enterprises, OBJECT-IDENTITY, MODULE-IDENTITY FROM SNMPv2-SMI; + + rsRoot MODULE-IDENTITY + LAST-UPDATED "200605170840Z" -- Mai 17th 2006 at 08:40 GMT + ORGANIZATION + "Rohde&Schwarz GmbH & Co.KG" + CONTACT-INFO + "Rohde & Schwarz GmbH & Co. KG + Muehldorfstrasse 15 + 81671 Munich + Germany" + DESCRIPTION + "The root OID of Rohde&Schwarz GmbH & Co.KG" + REVISION "200605170840Z" -- Mai 17th 2006 at 08:40 GMT + DESCRIPTION + "MODULE-IDENTITY added to RS-COMMON-MIB" + ::= { enterprises 2566 } + + rsCommon OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for common object and event definitions." + ::= { rsRoot 113 } + + rsProducts OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for products." + ::= { rsRoot 127 } + + rsProdBroadcast OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for broadcast products." + ::= { rsProducts 1 } + + rsProdBroadcastMeasurement OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for broadcast measurement products." + ::= { rsProdBroadcast 1 } + + rsProdBroadcastTransmitter OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for broadcast transmitter products." + ::= { rsProdBroadcast 2 } + + rsRequirements OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for management application requirements." + ::= { rsRoot 131 } + + rsExperimental OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for experimental definitions." + ::= { rsRoot 137 } + + rsCapabilities OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for agent capabilities." + ::= { rsRoot 139 } + + rsRegistration OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for registrations." + ::= { rsRoot 149 } + + rsRegModules OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Sub-tree for modules registrations." + ::= { rsRegistration 1 } + + rsRegBroadcast OBJECT-IDENTITY + STATUS current + DESCRIPTION + "currently not used" + ::= { rsRegistration 2 } + + rsRegBroadcastMeasurement OBJECT-IDENTITY + STATUS current + DESCRIPTION + "currently not used" + ::= { rsRegBroadcast 1 } + + rsRegBroadcastTransmitter OBJECT-IDENTITY + STATUS current + DESCRIPTION + "currently not used" + ::= { rsRegBroadcast 2 } + + END + +-- +-- RS-COMMON-MIB.my +-- diff --git a/MIBS/rs/RS-XX8000-COMMON-MIB b/MIBS/rs/RS-XX8000-COMMON-MIB new file mode 100644 index 0000000..206aae5 --- /dev/null +++ b/MIBS/rs/RS-XX8000-COMMON-MIB @@ -0,0 +1,2533 @@ +-- ***************************************************************************** +-- ***************************************************************************** +-- ** +-- ** COPYRIGHT (c) 2006 Rohde & Schwarz GmbH & Co. KG +-- ** Muehldorfstrasse 15 +-- ** R & S D-81671 Muenchen +-- ** +-- ***************************************************************************** +-- ** +-- ** MODULE RS-XX8000-COMMON-MIB +-- ** +-- ** DESCRIPTION Rohde & Schwarz SNMP +-- ** +-- ** HISTORY +-- ** 2006-11-20 hue - initial version +-- ** 2007-03-14 hue - enhanced logbook messages (TC) +-- ** 2007-05-16 hue - added logbook messages (TC) for XV703 +-- ** 2007-09-04 sr - added logbook messages for PumpUnit and +-- ** logbook messages (TC) for MediaFLO +-- ** 2007-10-02 sr - extend trapSinkTable +-- ** - extend LogbookEntryMessagesOST (2 new +-- ** messages for PumpUnit) +-- ** 2007-12-17 sr - update LogbookEntryMessagesNSU +-- ** - update LogbookEntryMessagesNetCCU +-- ** - new TCs: ProdInfoModuleNameTv and +-- ** ProdInfoModuleNameFm +-- ** 2008-02-06 sr - update LogbookEntryMessagesExcMediaFLO +-- ** - add transmitterConfig with dateTime +-- ** - new TCs: TimeOfDay and NoValue +-- ** 2008-02-11 hu - update LogbookEntryMessagesExcATV +-- ** - new TC: LockState +-- ** 2008-02-18 sr - add A8 to IndexTransmitter +-- ** 2008-04-23 ks - new TC EqualizerCalibrationState +-- ** sr - new TC LogbookEntryMessagesExcTv +-- ** - remove LogbookEntryMessagesExcMediaFLO +-- ** 2008-04-30 ks - LogbookEntryMessagesExcTv extended +-- ** 2008-05-13 hu - added TrapHandling under snmpConfig +-- ** 2008-06-02 sr - LogbookEntryMessagesExcTv extended +-- ** 2008-06-09 sr - dateTime with UTC values +-- ** - LogbookMaxEntryNumber: range to max 255 +-- ** 2008-06-16 sr - new TC 'TvStandard' +-- ** 2008-07-23 sr - new TC 'AtvStandard' +-- ** hu - obsoleted TC LogbookEntryMessagesExcATV +-- ** and DVB -> use LogbookEntryMessagesExcTv +-- ** 2008-09-03 sr - eventHistoryModule: additional values for +-- ** pump and antenna +-- ** 2008-09-30 ks - NTP configuration +-- ** 2008-10-10 sr - eventHistoryTable with new index 'eventHistoryTxIdx' +-- ** 2008-12-12 sr - new: swMaintenance and eventTx, +-- ** - rackExtCoolingWarning renamed to rackGpiWarning +-- ** - rackExtCoolingFault renamed to rackGpiFault +-- ** 2009-02-10 ks - add to eventHistoryModule: gps, dvbRecMon, gpParIOsr +-- ** sr - LogbookEntryMessagesExcTv updated +-- ** 2008-03-13 ks - reserveInputLost added to LogbookEntryMessagesExcTv +-- ** - rackProbeNotCalibrated added to LogbookEntryMessagesOST +-- ** - update LogbookEntryMessagesNSU +-- ** - update LogbookEntryMessagesNetCCU +-- ** 2008-04-30 ks - Sx801 messages added to LogbookEntryMessagesExcTv +-- ** 2008-06-03 ks - intPwrSupply, extPwrSupply, rackTemperatureWarning added +-- ** 2008-06-26 ks - new textual convention InputSource +-- ** 2008-09-10 ks - new value "inconsistent" for textual convention TvStandard +-- ** - additional values for LogbookEntryMessagesNetCCU +-- ** 2009-12-08 ks - excSFNIdleRegulation, excInput1Available, excInput2Available, +-- ** excInput1LPAvailable, excInput2LPAvailable added to LogbookEntryMessagesExcTv +-- ** 2010-01-11 ks - xlxInputStepProtection, excNoSfnData, excNoMobileDtvContent added +-- ** 2010-05-06 ks - ntpSyncFailed added +-- ** 2010-05-11 ks - indexProgram added +-- ** 2011-02-23 ks - trapSinkInformUnacknowledged obsoleted +-- ** 2011-05-11 ks - FailDelayMode, FailDelayStatus added +-- ** +-- ***************************************************************************** +-- ***************************************************************************** + + RS-XX8000-COMMON-MIB DEFINITIONS ::= BEGIN + + IMPORTS + rsProdBroadcastTransmitter, rsRegModules + FROM RS-COMMON-MIB + OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP + FROM SNMPv2-CONF + IpAddress, Integer32, Counter32, OBJECT-TYPE, MODULE-IDENTITY, + OBJECT-IDENTITY, NOTIFICATION-TYPE + FROM SNMPv2-SMI + DateAndTime, TruthValue, TEXTUAL-CONVENTION + FROM SNMPv2-TC; + + + rsXx8000MibModule MODULE-IDENTITY + LAST-UPDATED "201105110800Z" -- May 11, 2011 at 08:00 GMT + ORGANIZATION + "Rohde&Schwarz GmbH & Co. KG" + CONTACT-INFO + "Torsten Huebscher + Department 7TS2 + Broadcasting Division + Muehldorfstrasse 15 + 81671 Munich, Germany + torsten.huebscher@rohde-schwarz.com" + DESCRIPTION + "This MIB defines general objects of XX8000 transmitting systems from Rohde & Schwarz. + + Use this MIB for things all transmitters support via SNMP, e.g.: + - product information + - installation / configuration issues (trapsinks, managers aso.) + + The following MIBs are related to this: + - RS-COMMON-MIB - mandatory for this MIB." + REVISION "201105110800Z" -- May 11, 2011 at 08:00 GMT + DESCRIPTION + "FailDelayMode, FailDelayStatus added" + REVISION "201102230800Z" -- February 23, 2011 at 08:00 GMT + DESCRIPTION + "trapSinkInformUnacknowledged obsoleted" + REVISION "201005060800Z" -- May 06, 2010 at 08:00 GMT + DESCRIPTION + "ntpSyncFailed, indexProgram added" + REVISION "200912080800Z" -- December 08, 2009 at 08:00 GMT + DESCRIPTION + "excSFNIdleRegulation, excInput1Available, excInput2Available, + excInput1LPAvailable, excInput2LPAvailable added to + LogbookEntryMessagesExcTv" + REVISION "200909100800Z" -- September 10, 2009 at 08:00 GMT + DESCRIPTION + "new value 'inconsistent' for textual convention TvStandard + additional values for LogbookEntryMessagesNetCCU" + REVISION "200906260900Z" -- June 26, 2009 at 09:00 GMT + DESCRIPTION + "new textual convention InputSource" + REVISION "200906030900Z" -- June 03, 2009 at 09:00 GMT + DESCRIPTION + "intPwrSupply, extPwrSupply added to LogbookEntryMessagesNetCCU; + rackTemperatureWarning added to LogbookEntryMessagesOST" + REVISION "200904300900Z" -- April 30, 2009 at 09:00 GMT + DESCRIPTION + "Sx801 messages added to LogbookEntryMessagesExcTv" + REVISION "200903130900Z" -- March 13, 2009 at 09:00 GMT + DESCRIPTION + "reserveInputLost added to LogbookEntryMessagesExcTv + rackProbeNotCalibrated added to LogbookEntryMessagesOST + update LogbookEntryMessagesNSU + update LogbookEntryMessagesNetCCU" + REVISION "200902101600Z" -- February 10, 2009 at 16:00 GMT + DESCRIPTION + "add to eventHistoryModule: gps, dvbRecMon, gpParIO + LogbookEntryMessagesExcTv updated" + REVISION "200812121400Z" -- December 12, 2008 at 14:00 GMT + DESCRIPTION + "new: swMaintenance and eventTx, + rackExtCoolingWarning renamed to rackGpiWarning + rackExtCoolingFault renamed to rackGpiFault" + REVISION "200810200900Z" -- October 20, 2008 at 09:00 GMT + DESCRIPTION + "LogbookEntryMessagesNSU: + antennaRedundancySumWarning(196) + tcbTxBPowerSupply(197) + txBPosition(198) + antennaRedundancySumFault(226) + LogbookEntryMessagesNetCCU: + monitorFaultExcA(107) + monitorFaultExcA(108)" + REVISION "200810100900Z" -- October 10, 2008 at 09:00 GMT + DESCRIPTION + "eventHistoryTable with new index 'eventHistoryTxIdx'" + REVISION "200809300900Z" -- September 30, 2008 at 09:00 GMT + DESCRIPTION + "NTP configuration" + REVISION "200809030900Z" -- September 03, 2008 at 09:00 GMT + DESCRIPTION + "eventHistoryModule: additional values for pump and antenna" + REVISION "200807231530Z" -- July 23, 2008 at 15:30 GMT + DESCRIPTION + "- new TC 'AtvStandard' + - obsoleted TC LogbookEntryMessagesExcATV and DVB + -> use LogbookEntryMessagesExcTv" + REVISION "200806160900Z" -- June 16, 2008 at 09:00 GMT + DESCRIPTION + "new TC 'TvStandard'" + REVISION "200806100800Z" -- June 10, 2008 at 08:00 GMT + DESCRIPTION + "dateTime with UTC values + LogbookMaxEntryNumber: range to max 255" + REVISION "200806021030Z" -- June 02, 2008 at 10:30 GMT + DESCRIPTION + "LogbookEntryMessagesExcTv extended" + REVISION "200805131500Z" -- May 13, 2008 at 15:00 GMT + DESCRIPTION + "LogbookEntryMessagesExcTv extended + added TrapHandling under snmpConfig" + REVISION "200804231100Z" -- April 23, 2008 at 11:00 GMT + DESCRIPTION + "new TC EqualizerCalibrationState + new TC LogbookEntryMessagesExcTv + remove LogbookEntryMessagesExcMediaFLO" + REVISION "200802181330Z" -- February 18, 2008 at 13:30 GMT + DESCRIPTION + "add A8 to IndexTransmitter" + REVISION "200802111200Z" -- February 11, 2008 at 12:00 GMT + DESCRIPTION + "updated LogbookEntryMessagesExcATV, added LockState" + REVISION "200802061200Z" -- February 06, 2008 at 12:00 GMT + DESCRIPTION + "update LogbookEntryMessagesExcMediaFLO + add transmitterConfig with dateTime + new TCs: TimeOfDay and NoValue" + REVISION "200712171200Z" -- December 17, 2007 at 12:00 GMT + DESCRIPTION + "update LogbookEntryMessagesNSU + update LogbookEntryMessagesNetCCU + new TCs: ProdInfoModuleNameTv and ProdInfoModuleNameFm" + REVISION "200710021000Z" -- October 02, 2007 at 10:00 GMT + DESCRIPTION + "extend trapSinkTable + extend LogbookEntryMessagesOST (2 new messages for PumpUnit)" + REVISION "200709041300Z" -- September 04, 2007 at 13:00 GMT + DESCRIPTION + "Added logbook messages for PumpUnit and + logbook messages (TC) for MediaFLO." + REVISION "200706291000Z" -- June 29, 2007 at 10:00 GMT + DESCRIPTION + "Enhanced logbook messages for ExcFM." + REVISION "200705161000Z" -- May 16, 2007 at 10:00 GMT + DESCRIPTION + "Added logbook messages (TC) for XV703 transposers." + REVISION "200703141000Z" -- March 14, 2007 at 10:00 GMT + DESCRIPTION + "Enhanced logbook messsages for ExcDVB and ExcFM (TextualConvention)." + REVISION "200612211000Z" -- December 21, 2006 at 10:00 GMT + DESCRIPTION + "Added IndexAB for easier handling of exciterA/B and outputstageA/B in other MIBs." + REVISION "200611201000Z" -- November 20, 2006 at 10:00 GMT + DESCRIPTION + "This is the initial version." + ::= { rsRegModules 163 } + + + +-- +-- Textual conventions +-- + + ReadableString ::= TEXTUAL-CONVENTION + DISPLAY-HINT + "255a" + STATUS current + DESCRIPTION + "An octet string containing a human-readable string. This + string may have originally been encoded as specified + in EN 300 468 Annex A, but this is not a requirement. + + To maintain generality, the information is represented + using the ISO/IEC IS 10646-1 character set, encoded as an + octet string using the UTF-8 transformation format + described in RFC2279. + + Control codes are interpreted as specified in EN 300 468 + Annex A, section A.1. The interpretation of other control + codes is undefined. + + For information encoded in 7-bit US-ASCII, the UTF-8 + encoding is identical to the US-ASCII encoding. + + UTF-8 may require multiple bytes to represent a single + character/code point; thus the length of this object in + octets may be different from the number of characters + encoded. Similarly, size constraints refer to the number + of encoded octets, not the number of characters represented + by an encoding." + SYNTAX OCTET STRING (SIZE (0..255)) + + FloatingPoint ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "FloatingPoint provides a way of representing non-integer + numbers in SNMP. Numbers are represented as a string of + ASCII characters in the natural way. So for example, '3', + '3.142' and '0.3142E1' are all valid numbers. + + The syntax for the string is as follows. [] enclose an + optional element, | is the separator for a set of + alternatives. () enclose syntax which is to be viewed + as a unit. + + FloatingPoint ::= [Sign] + (Float1 | Float2 | DigitSequence) + [ExponentPart] + + Float1 ::= DigitSequence '.' [DigitSequence] + Float2 ::= '.' DigitSequence + DigitSequence ::= Digit [DigitSequence] + + ExponentPart ::= ('e' | 'E') [Sign] DigitSequence + + Digit ::= '0'..'9' + Sign ::= '+' | '-'" + SYNTAX OCTET STRING (SIZE (1..63)) + + TimeOfDay ::= TEXTUAL-CONVENTION + DISPLAY-HINT + "1d:1d:1d" + STATUS current + DESCRIPTION + "A time of day specification. + + octets contents range + ------ -------- ----- + 1 hour 0..23 + 2 minute 0..59 + 3 second 0..59 + + For example, 1:30:17 PM would be displayed as 13:30:17. + + The second can be omitted. + " + SYNTAX OCTET STRING (SIZE (2 | 3)) + + EventMask ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Enables / Disables this event. + enable(1) --> active, will be sent in case the event occurs + disable(2) --> inactive, will not be sent in case the event occurs." + SYNTAX INTEGER + { + enable(1), + disable(2) + } + + EventPriority ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The priority of the event. + Users can freely set this value in range 0..255." + SYNTAX Integer32 (0..255) + + EventClass ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "These are the levels of events a transmitter has. + Info(3): Are events which only inform about changes, e.g. 'local/remote' + or 'reboot of the control unit'. They don't affect the transmission. + Warning(2): Are minor problems which do not influence transmission itself, + but may cause a bigger problem when no action is taken, e.g. + 'RF Loop Program'. Warnings may appear and disappear without the need + of acknowledgment. + Fault(1): Have a direct impact on the transmission, e.g. + 'failure power supply'. Faults never disappear without acknowledgment." + SYNTAX INTEGER + { + fault(1), + warning(2), + info(3) + } + + EventState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The current state of an event: + active(1) --> event is active (coming) + inactive(2) --> event is inactive (going) + This is used in all logbooks and in all event handling tables." + SYNTAX INTEGER + { + active(1), + inactive(2) + } + + EventMaxEntryNumber ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The maximum number of events. + This is used in other MIBs as a placeholder." + SYNTAX Integer32 (1..999) + + SwitchOnOff ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is for all on/off-switches." + SYNTAX INTEGER + { + on(1), + off(2) + } + + Trigger ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Trigger for starting a certain action. + idle(1) --> ready, do nothing + trigger(2) --> do now + + A GET will always return idle(1). + A SET idle(1) will return NO_ERROR without doing anything." + SYNTAX INTEGER + { + idle(1), + trigger(2) + } + + LogbookEntryMessagesNetCCU ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Inserted information in the logbook of NetCCU." + SYNTAX INTEGER + { + local(3), + rfOn(4), + excAutoReady(6), + excAutoChanged(7), + ostAutoReady(8), + ostAutoChanged(9), + rfOnSound1(10), + rfOnSound2(11), + activeExcA(12), + activeExcB(13), + activeOstA(14), + activeOstB(15), + rfOnVision(16), + rfOnActiveExc(17), + rfOnDLoad(18), + rfOkDLoad(19), + swBackupStarted(20), + swBackupDone(21), + swBackupFailed(22), + swRestoreStarted(23), + swRestoreDone(24), + swRestoreFailed(25), + optionKeyExpired(30), + txModeSwitchOverStarted(37), + txModeSwitchOverEnded(38), + reboot(40), + rfLoopProgram(41), + rfLoopReserve(42), + rfWarning(43), + reflectionWarning(44), + intPwrSupply(45), + extPwrSupply(46), + rfVisionWarning(47), + rfSound1Warning(48), + rfSound2Warning(49), + fanFault(51), + sumWarningRec(52), + sumWarningExcA(53), + sumWarningExcB(54), + sumWarningOstA(55), + sumWarningOstB(56), + rfDLoadWarning(57), + rfDLoadReflection(58), + receiverConnect(59), + receiverSumFault(60), + txModeInconsistent(61), + boardTemperatureWarning(62), + optionKeyWillExpire(70), + powerSupply(81), + rfFail(82), + reflectionFault(83), + boardTemperature(84), + excSwitch(85), + ostSwitch(86), + connectionExcA(87), + connectionExcB(88), + connectionOstA(89), + connectionOstB(90), + rfVision(91), + rfSound1Fault(92), + rfSound2Fault(93), + connectionRec(95), + summaryFaultRec(96), + summaryFaultExcA(97), + summaryFaultExcB(98), + summaryFaultOstA(99), + summaryFaultOstB(100), + rfDLoadFault(101), + rfDLoadReflectionFault(102), + apaConnect(103), + absorber(104), + monitorFaultExcA(107), + monitorFaultExcB(108), + txModeSwitchOverFailed(109) + } + + LogbookEntryMessagesExcTv ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Inserted information in the logbook of TV exciters." + SYNTAX INTEGER + { + excReboot(0), + excSumFault(1), + excSumWarning(2), + excLocal(3), + excExciterOn(4), + excRfOk(5), + excNoInput(6), + excReference(7), + excRfOn(8), + excMute(9), + excRelieveReq(10), + excSwDiag(11), + excOneFan(12), + excNoCCUComm(13), + excSwUpdated(14), + excBiosUpdated(15), + excPowerSupply(16), + excTemperature(17), + excFans(18), + excHwMainboard(19), + excHwCfCard(20), + excOutputOpen(21), + excRebootRqst(22), + excHwEEPROM(23), + excWatchdog(24), + excRfFail(25), + excLoopOpen(26), + excNoFPGA(27), + excCarrierLock(28), + excInputFail(30), + excOptionExpired(37), + excOptionWillEnd(38), + excFPGAConfig(40), + excHwIIFBoard(41), + excHwRfBoard(42), + excHwSynth1(43), + excHwSynth2(44), + excHwSynth3(45), + excMuteAudio1(46), + excMuteAudio2(47), + excVideoInp1(48), + excVideoInp2(49), + excVideoInpAct(50), + excRfOutExcV(51), + excRfOutAntV(52), + excRfOutExcA1(53), + excRfOutAntA1(54), + excRfOutExcA2(55), + excRfOutAntA2(56), + excClippingAntInp(57), + excNoHeadroomAnt(58), + excAudioMode(59), + excWhiteLine(60), + excWhiteLineLnAmp(61), + excWhiteLineLnAmpW(62), + excSyncCheck(63), + excWhiteLimiter(64), + excDevLimAud1(65), + excDevLimAud2(66), + excVideoInpClip(67), + excAud1InpClip(68), + excAud2InpClip(69), + excNICAM728Data(70), + excNICAM728Carr(71), + excAud2OutClip(72), + excRfMonFail(73), + excRfVideoFail(74), + excRfAudio1Fail(75), + excRfAudio2Fail(76), + excAudioLoopOpen(77), + excVideoLoopOpen(78), + excTestMode(100), + excExtRefFail(101), + excExtRefWeak(102), + excExtPPSFail(103), + excInputSwitched(104), + excInputFail2(105), + excWrongDatarate(106), + excFifoOverUnderflow(107), + excDelayChanged(108), + excSFNDelay(109), + excNoMIP(110), + excWrongMFArrivalTime(111), + excExtPPSAsynchron(112), + excPacketUnlock(113), + excMaxDelayChanged(114), + excReferenceAbsent(115), + excNoPPS(116), + excRfFailAmplifier(117), + excWarningAmplifier(118), + excAmpOverflow(119), + excModError(120), + excFLOModErr(121), + excInput1(122), + excInput2(123), + excInput1LP(124), + excInput2LP(125), + excNoReserveAvailable(126), + excSynthesizerUnlocked(127), + excSFNIdleRegulation(128), + excAmpVSWR(170), + excAmpTempWarn(171), + excAmpTempFault(172), + excAmpRegulation(173), + excAmpTransistor(174), + excAmpReducedPower(175), + excHWAmpEEPROM(176), + excRFWarningAmp(177), + excModSfnRAMInitErr(180), + excModTransportErr(181), + excModFIFOParErr(182), + excModFIFOSeqErr(183), + excModSfnBufEmpty(184), + excModSfnBufFull(185), + excModSsfMultiple(186), + excModSsfMissing(187), + excModLofTS1(188), + excModLofTS2(189), + excModCoreStall(190), + excModIqInactive(191), + excModMtiVersErr(192), + excModCoreReset(193), + excModConfigChanged(194), + excSFNBuffer(195), + excModIdleMode(196), + excSFNBufferTooEmpty(197), + excModMemError(198), + excSfnBufferTooFull(199), + excMissingSIP(205), + excTCLevelOutOfRange(210), + excTCLevelOverflow(211), + excInputFail3(212), + excInputWarning(213), + excEchoWarning(214), + xlxInputStepProtection(215), + excExt1PPSReference(220), + excInt1PPSReference(221), + exc5MHzReference(222), + exc10MHzReference(223), + excPrecorrectionSetupInfo(230), + excPrecorrectionSetupFail(231), + excFramecounter(240), + excMissingIIP(241), + excPSUOvertemp(250), + excPowerSupplyWarning(251), + excNSUConnected(256), + excMonHWError(260), + excRecvRxAUXHWError(261), + excRecvHWError(262), + excMonNoFrontendLock(263), + excRecvAUXNoFrontendLock(264), + excRecvNoFrontendLock(265), + excMonBadInputSignal(266), + excRecvAUXBadInputSignal(267), + excRecvBadInputSignal(268), + excMonNoInputSignal(269), + excRecvAUXWarningInputSignal(270), + excRecvWarningInputSignal(271), + excMonAUXHWError(272), + excMonAUXNoFrontendLock(273), + excMonAUXBadInputSignal(274), + excMonitorNoInputFail(280), + excNoSfnData(300), + excNoMobileDtvContent(301), + excInput1Available(320), + excInput2Available(321), + excInput1LPAvailable(322), + excInput2LPAvailable(323), + excRfTest(400), + excPRBSInsertion(401), + excTestEnsemble(402), + excInvalidTII(403), + excTIITransmission(404), + excTxModeChange(405), + excTIIChange(406), + excNullTIST(407), + excTISTJitter(408), + excTS1FrameLock(409), + excTS2FrameLock(410), + excCrcViolationRateTooHigh(411), + excSeamlessReady(412), + excTestFIC(413), + dvbt2NoL1Present(500), + dvbt2InvalidConfiguration(501), + dvbT2UnsupportedConfiguration(502), + dvbt2BandwidthMismatch(503), + iqHeader1Integrity(550), + iqHeader2Integrity(551), + iqHeader1Issues(552), + iqHeader2Issues(553), + iqInputRegulation(554), + iqWrongConfiguration(555), + iqTseMute(556), + iqInputOrder(557), + sx801PowerFail7Vpositive(600), + sx801PowerFail7Vnegative(601), + sx801PowerFail12V(602), + preAmpTemperatureFault(603), + preAmpRFFault(604), + parIoExcLink(605), + parIoTxLink(606), + parIoGpIoLink(607), + rfBoardRFFault(608), + sx801PhaseError(640), + sx801ReflectionWarning(641), + sx801ReflectionFault(642), + sx801RfWarning(643), + sx801AmplShutdown(644), + sx801PA1Supply1TooHot(650), + sx801PA1Supply2TooHot(651), + sx801PA1ReserveSupplyTooHot(652), + sx801PA1Supply1Fail(653), + sx801PA1Supply2Fail(654), + sx801PA1ReserveSupplyFail(655), + sx801PA1AcFail(656), + sx801PA1BlowerFail(657), + sx801PA1TransistorFail(658), + sx801PA1DriverFail(659), + sx801PA1RfInFail(660), + sx801PA1Reflection(661), + sx801PA1VSWR(662), + sx801PA1PowerFail(663), + sx801PA1Regulation(664), + sx801PA1Temperature(665), + sx801PA1Communication(666), + sx801PA1Update(667), + sx801PA2Supply1TooHot(675), + sx801PA2Supply2TooHot(676), + sx801PA2ReserveSupplyTooHot(677), + sx801PA2Supply1Fail(678), + sx801PA2Supply2Fail(679), + sx801PA2ReserveSupplyFail(680), + sx801PA2AcFail(681), + sx801PA2BlowerFail(682), + sx801PA2TransistorFail(683), + sx801PA2DriverFail(684), + sx801PA2RfInFail(685), + sx801PA2Reflection(686), + sx801PA2VSWR(687), + sx801PA2PowerFail(688), + sx801PA2Regulation(689), + sx801PA2Temperature(690), + sx801PA2Communication(691), + sx801PA2Update(692), + pa3Supply1TooHot(700), + pa3Supply2TooHot(701), + pa3ReserveSupplyTooHot(702), + pa3Supply1Fault(703), + pa3Supply2Fault(704), + pa3ReserveSupplyFault(705), + pa3ACFault(706), + pa3BlowerFault(707), + pa3TransistorFault(708), + pa3DriverFault(709), + pa3RFinFault(710), + pa3Reflection(711), + pa3VSWR(712), + pa3PowerFault(713), + pa3Regulation(714), + pa3Temperature(715), + pa3Communication(716), + pa3Update(717), + pa4Supply1TooHot(725), + pa4Supply2TooHot(726), + pa4ReserveSupplyTooHot(727), + pa4Supply1Fault(728), + pa4Supply2Fault(729), + pa4ReserveSupplyFault(730), + pa4ACFault(731), + pa4BlowerFault(732), + pa4TransistorFault(733), + pa4DriverFault(734), + pa4RFinFault(735), + pa4Reflection(736), + pa4VSWR(737), + pa4PowerFault(738), + pa4Regulation(739), + pa4Temperature(740), + pa4Communication(741), + pa4Update(742), + tse800NoConnect(770), + tse800Warning(771), + tse800Fault(772), + automaticOn(800), + automaticFault(801), + autoCtrlExcActive(802), + autoPrgmExcActive(803), + changeoverByUser(804), + changeoverByAuto(805), + automaticReady(806), + autoPrgmExcNoConnect(807), + autoPrgmExcFault(808) + } + + LogbookEntryMessagesExcDVB ::= TEXTUAL-CONVENTION + STATUS obsolete + DESCRIPTION + "Inserted information in the logbook of DVB exciters. + + This is obsolete! Please use LogbookEntryMessagesExcTv!" + SYNTAX INTEGER + { + excReboot(0), + excSummaryFault(1), + excSummaryWarning(2), + excLocal(3), + excOn(4), + excRfOk(5), + excNoInput(6), + excReferenceFail(7), + excRfOn(8), + excMute(9), + excFanWarning(12), + excNoCommunicationToNetCCU(13), + excPowerSupply(16), + excBoardTemperature(17), + excFanFault(18), + excSelfTest(19), + excHwCfCard(20), + excOutputOpen(21), + excHwEeprom(23), + excRfFail(25), + excLoop(26), + excCarrierLock(28), + excInputFault(30), + excOptionExpired(37), + excOptionExpires(38), + excHwFpgaConfig(40), + excHwIifBoard(41), + excHwRfBoard(42), + excHwSynth1(43), + excHwSynth2(44), + excHwSynth3(45), + excTestMode(100), + excExtRefFail(101), + excExtRefWeak(102), + excExtPPSFail(103), + excWrongConfig(104), + excInputFail(105), + excWrongDatarate(106), + excFifoWarning(107), + excExtDelayChanged(108), + excWrongDelay(109), + excNoMIP(110), + excWrongMFArrivalTime(111), + excExtPPSAsynchron(112), + excPacketUnlock(113), + excMaxDelayChanged(114), + excNoReference(115), + excNoPPS(116), + excRfFailAmplifier(117), + excWarningAmplifier(118), + excOverflowAmplifier(119), + excSynthUnlock(127) + } + + LogbookEntryMessagesExcFM ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Inserted information in the logbook of FM exciters." + SYNTAX INTEGER + { + excReboot(0), + excSummaryFault(1), + excSummaryWarning(2), + excLocal(3), + excOn(4), + excRfOk(5), + excNoInput(6), + excReferenceFail(7), + excRfOn(8), + excMute(9), + excNoCommunicationToNetCCU(13), + excBiosUpdated(15), + excPowerSupply(16), + excOutputOpen(21), + excEEPROMError(23), + excRfFail(25), + excLoop(26), + excFPGANotLoaded(27), + excCarrierLock(28), + excInputFault(30), + ostSummaryFault(32), + excSoftFault(33), + ostSoftFault(34), + ostSummaryWarning(36), + excOptionKeyExpired(37), + excOptionKeyWarning(38), + excTemperatureWarning(41), + excTemperatureFault(42), + excRfUnitFault(43), + excFan1NotOk(47), + excFan2NotOk(48), + excMainPLLUnlocked(49), + excMainUPCUnlocked(50), + excMainCLKUnlocked(51), + exc12VFanWarning(67), + exc12VRackControllerWarning(71), + excInfoFrequencyChanged(81), + excLevelAESLeftTooLow(84), + excLevelAESRightTooLow(85), + excLevelMPXTooLow(86), + excNoDataInput(87), + excLevelAFLeftTooLow(88), + excLevelAFRightTooLow(89), + excLevelAUX1TooLow(90), + excLevelAUX2TooLow(91), + excLevelAUX3TooLow(92), + excLevelAESLeftTooHigh(93), + excLevelAESRightTooHigh(94), + excLevelMPXTooHigh(95), + excLevelAFLeftTooHigh(97), + excLevelAFRightTooHigh(98), + excLevelAUX1TooHigh(99), + excLevelAUX2TooHigh(100), + excLevelAUX3TooHigh(101), + excAESNoClock(102), + excAESParityBiphaseError(103), + excAESStateNotValid(104), + excInpCh1NotOk(105), + excInpCh2NotOk(106), + excInpCh1Active(107), + excInpCh2Active(108), + excInpAutomaticActive(109), + recSummaryWarning(110), + recSummaryFault(111), + ostRfPresent(112), + recRfWarning(113), + recCarrierNotPresent(114), + recNoConnection(115), + ostRfWarn(116), + ostRfFault(117), + ostNoInput(118), + recRfFault(119), + recRfPresent(120), + ostPowerRegulationActive(121), + ostTemperatureWarning(122), + ostSwrWarning(123), + ostSwrFault(124), + ostNoConnection(125) + } + + LogbookEntryMessagesOST ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Inserted information in the logbook of outputstage." + SYNTAX INTEGER + { + ostRfOn(42), + ostRfOk(43), + ostRfReduced(44), + ostNoInput(45), + ostRfWarning(46), + ostReflectionWarning(47), + ostRackWarning(48), + ostCoolingWarning(49), + ostRfFail(50), + ostReflectionFault(51), + ostACFault(52), + ostCoolingFault(53), + ostCommunicationFault(54), + rackLinkOk(58), + rackOn(59), + reducedRfExcA(60), + reducedRfExcB(61), + rackGpiWarning(62), + rackFan1Fault(63), + rackFan2Fault(64), + rackCoolingSumWarning(65), + rackAmplifierSumFault(66), + rackGpiFault(67), + rackTemperatureFault(68), + rackACFault(69), + rackCoolingSumFault(70), + rackTempFaultAbs1(71), + rackTempFaultAbs2(72), + rackDCFault(73), + ampNumberDiffers(76), + ampOn(77), + ampDCOk(78), + ampACOk(79), + ampRfInFail(80), + ampRfFail(81), + ampReflectionFault(82), + ampTemperatureFault(83), + ampFanFault(84), + ampTransistorFault(85), + pucFault(86), + pucWarning(87), + pucLink(88), + pucFan1Link(89), + pucFan2Link(90), + pucFan3Link(91), + pucFan4Link(92), + pucPump1Link(93), + pucPump2Link(94), + pucOn(95), + pucFan1(96), + pucFan2(97), + pucFan3(98), + pucFan4(99), + pucPump1(100), + pucPump2(101), + pucPressure(102), + pucMaintenance(103), + pucConfig(104), + pucFan1Fault(105), + pucFan2Fault(106), + pucFan3Fault(107), + pucFan4Fault(108), + pucPump1Fault(109), + pucPump2Fault(110), + pucPressureFault(111), + pucFilter(117), + pucPuOff(118), + rackProbeNotCalibrated(119), + rackTemperatureWarning(120), + rackSumFault(121), + rackAbsorberFault(122), + rackOvervoltageProtection(123), + psu1Fault(124), + psu2Fault(125), + psuRFault(126), + ampDriverFault(127), + ctxPowerFault(128), + ampRegulationFault(129) + } + + LogbookEntryMessagesNSU ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Inserted information in the logbook of Nplus1-Switchoverunit." + SYNTAX INTEGER + { + local(3), + automaticOn(5), + automaticReady(6), + automaticChangeover(7), + swBackupStarted(10), + program1RfOn(11), + program2RfOn(12), + program3RfOn(13), + program4RfOn(14), + program5RfOn(15), + program6RfOn(16), + program7RfOn(17), + program8RfOn(18), + programReserveRfOn(19), + swBackupDone(20), + txA1ToDummyLoad(21), + txA2ToDummyLoad(22), + txA3ToDummyLoad(23), + txA4ToDummyLoad(24), + txA5ToDummyLoad(25), + txA6ToDummyLoad(26), + txA7ToDummyLoad(27), + txA8ToDummyLoad(28), + txBToDummyLoad(29), + optionkeyExpired(30), + txA1Local(31), + txA2Local(32), + txA3Local(33), + txA4Local(34), + txA5Local(35), + txA6Local(36), + txA7Local(37), + txA8Local(38), + txBLocal(39), + reboot(40), + txA1SumWarning(41), + txA2SumWarning(42), + txA3SumWarning(43), + txA4SumWarning(44), + txA5SumWarning(45), + txA6SumWarning(46), + txA7SumWarning(47), + txA8SumWarning(48), + txBSumWarning(49), + swBackupFailed(50), + txA1NoConnect(51), + txA2NoConnect(52), + txA3NoConnect(53), + txA4NoConnect(54), + txA5NoConnect(55), + txA6NoConnect(56), + txA7NoConnect(57), + txA8NoConnect(58), + txBNoConnect(59), + swRestoreStarted(60), + txA1SumFault(61), + txA2SumFault(62), + txA3SumFault(63), + txA4SumFault(64), + txA5SumFault(65), + txA6SumFault(66), + txA7SumFault(67), + txA8SumFault(68), + txBSumFault(69), + swRestoreDone(70), + swRestoreFailed(80), + connBoardTxA1Updating(81), + connBoardTxA2Updating(82), + connBoardTxA3Updating(83), + connBoardTxA4Updating(84), + connBoardTxA5Updating(85), + connBoardTxA6Updating(86), + connBoardTxA7Updating(87), + connBoardTxA8Updating(88), + connBoardTxBUpdating(89), + inputSwitchUpdating(90), + connBoardTxA1SumWarning(91), + connBoardTxA2SumWarning(92), + connBoardTxA3SumWarning(93), + connBoardTxA4SumWarning(94), + connBoardTxA5SumWarning(95), + connBoardTxA6SumWarning(96), + connBoardTxA7SumWarning(97), + connBoardTxA8SumWarning(98), + connBoardTxBSumWarning(99), + inputSwitchSumWarning(100), + fanFault(101), + sumWngRCV(102), + rcvNoConnect(103), + sumFltRCV(104), + optionkeyWillExpire(105), + powerSupply(106), + boardTemperature(107), + automaticFault(108), + rcvNoConnectx(109), + sumFltRCVx(110), + connBoardTxA1SumFault(111), + connBoardTxA2SumFault(112), + connBoardTxA3SumFault(113), + connBoardTxA4SumFault(114), + connBoardTxA5SumFault(115), + connBoardTxA6SumFault(116), + connBoardTxA7SumFault(117), + connBoardTxA8SumFault(118), + connBoardTxBSumFault(119), + inputSwitchSumFault(120), + outputSwitch(122), + inputSwitchChangeOver(123), + txBParameterSet(124), + antennaRedundancySumWarning(196), + tcbTxBPowerSupply(197), + txBPosition(198), + intPwrSupply(200), + extPwrSupply(201), + antennaRedundancySumFault(226) + } + + LogbookEntryMessagesXV703 ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Inserted information in the logbook of XV703 transposers." + SYNTAX INTEGER + { + noNetCCUConnection(0), + summaryFault(1), + summaryWarning(2), + local(3), + on(4), + ok(5), + fanWarning(7), + rfOn(8), + updatedBIOS(9), + powerSupply(10), + boardTemperature(11), + fanFault(12), + reboot(14), + loopOpen(15), + noConnection(16), + ampFail(17), + ifrPllFail(18), + rfiPllFail(19), + refFreqFail(20), + pInFail(21), + rfFail(22) + } + + LogbookEntrySlope ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "These are the information which are inserted in the logbook." + SYNTAX INTEGER + { + set(1), + reset(2) + } + + LogbookMaxEntryNumber ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The maximum number of entries in a logbook. + This is used in other MIBs as a placeholder." + SYNTAX Integer32 (0..255) + + IndexTransmitter ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is used for Nplus1 systems to indicate a transmitter (physical view). + TransmitterB(1) is the reserve transmitter, transmitterA1(2) to transmitterA8(9) are the main transmitter. + In difference to the logical view, transmitterB(1) has special parameters available." + SYNTAX INTEGER + { + transmitterB(1), + transmitterA1(2), + transmitterA2(3), + transmitterA3(4), + transmitterA4(5), + transmitterA5(6), + transmitterA6(7), + transmitterA7(8), + transmitterA8(9) + } + + IndexRack ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is used for systems with more than 1 rack to display a designated rack." + SYNTAX Integer32 (1..10) + + IndexAmplifier ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is used to display a designated amplifier." + SYNTAX Integer32 (1..10) + + IndexProgram ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is used for Nplus1 systems to indicate a program sent out (logical view). + ProgramRes(1) is the reserve program, program1(2) to program8(9) are the main programs. + In difference to the physical view, programRes(1) has no special parameters available. Furthermore it has no priority." + SYNTAX INTEGER + { + programRes(1), + program1(2), + program2(3), + program3(4), + program4(5), + program5(6), + program6(7), + program7(8), + program8(9) + } + + IndexAB ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value for the module A (exciterA, outputstageA) or + B (exciterB, outputstageB) for alarms. + This is a helper column." + SYNTAX INTEGER + { + a(1), + b(2) + } + + ProdInfoModuleNameTv ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The product information module names for TV." + SYNTAX INTEGER + { + exciter(1), + exciterMainboard(2), + exciterInputInterface(3), + exciterRfBoard(4), + exciterSynth1(5), + exciterSynth2(6), + exciterSynth3(7), + netCCU(50), + rackcontroller(100), + amplifier(101) + } + + ProdInfoModuleNameFm ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The product information module names for FM." + SYNTAX INTEGER + { + exciter(1), + exciterMainboard(2), + exciterBootprog(3), + exciterBootload(4), + exciterOs(5), + exciterFpga(6), + netCCU(50), + rackcontroller(100), + amplifier(101) + } + + ProdInfoModuleNameNsu ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The product information module names for NSU." + SYNTAX INTEGER { tcBoard(70) } + + LogbookEntryMessagesExcATV ::= TEXTUAL-CONVENTION + STATUS obsolete + DESCRIPTION + "Inserted information in the logbook of ATV exciters. + + This is obsolete! Please use LogbookEntryMessagesExcTv!" + SYNTAX INTEGER + { + reboot(0), + summaryFault(1), + summaryWarning(2), + local(3), + exciterOn(4), + rfOk(5), + noInput(6), + reference(7), + rfOn(8), + mute(9), + relieveReq(10), + oneFan(12), + noCcuComm(13), + swUpdated(14), + biosUpdated(15), + powerSupply(16), + temperature(17), + fans(18), + hwMainboard(19), + hwCfCard(20), + outputOpen(21), + hwEEPROM(23), + rfFail(25), + loopOpen(26), + noFPGA(27), + carrierLock(28), + inputFail(30), + optionExpired(37), + optionWillEnd(38), + fpgaConfig(40), + hwIifBoard(41), + hwRfBoard(42), + hwSynth1(43), + hwSynth2(44), + hwSynth3(45), + muteAudio1(46), + muteAudio2(47), + videoInput1(48), + videoInput2(49), + videoInputAct(50), + rfOutExcV(51), + rfOutAntV(52), + rfOutExcA1(53), + rfOutAntA1(54), + rfOutExcA2(55), + rfOutAntA2(56), + clippingAntennaInput(57), + noHeadroomAntenna(58), + audioMode(59), + whiteLine(60), + whiteLineLnAmp(61), + whiteLineLnAmpW(62), + syncCheck(63), + whiteLimiter(64), + devLimAud1(65), + devLimAud2(66), + videoInputClipping(67), + aud1InpClip(68), + aud2InpClip(69), + nicam728Data(70), + nicam728Carr(71), + aud2OutClip(72), + rfMonFail(73), + rfVideoFail(74), + rfAudio1Fail(75), + rfAudio2Fail(76), + audioLoopOpen(77), + videoLoopOpen(78), + testMode(100), + extRefFail(101), + extRefWeak(102), + extPpsFail(103), + wrongConfig(104), + wrongDatarate(106), + fifoOverUnderFlow(107), + delayChanged(108), + wrongDelay(109), + noMIP(110), + wrongMfArrivalTime(111), + packetUnlock(113), + maxDelayChanged(114), + referenceAbsent(115), + noPPS(116), + rfFailAmplifier(117), + warningAmplifier(118), + amplifierOverflow(119), + synthesizerUnlocked(127) + } + + LockState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is for carrier locking." + SYNTAX INTEGER + { + locked(1), + unlocked(2) + } + + EqualizerCalibrationState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "possible precorrection equalizer calibration states" + SYNTAX INTEGER + { + inactive(1), + active(2), + warning(3), + fail(4) + } + + TvStandard ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The TV standards. + The value 'inconsistent' cannot be written. + It is shown only when switching from one standard to another in between." + SYNTAX INTEGER + { + atv(1), + dvb(2), + atsc(3), + dtmb(4), + mediaFLO(5), + test(6), + dab(7), + isdbt(8), + dvbt2(9), + inconsistent(100) + } + + AtvStandard ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The ATV standards." + SYNTAX INTEGER + { + bg(1), + m(2), + m1(3), + n(4), + dk(5), + i(6), + i1(7), + dkfm2(8), + l(9), + k1(10), + h(11), + b(12), + g(13) + } + + InputSource ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "input source selection type" + SYNTAX INTEGER + { + bnc(1), + rx(2), + sat(3), + ip(4), + reserved(5), + tp(6), + vf(7), + t2Mi(8), + iq(9) + } + + Sx801AmplifierState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Description." + SYNTAX INTEGER + { + off(1), + warning(2), + ok(3), + unknown(4) + } + + FailDelayMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The mode how fail delay is handled. + always(1) - the fail delay action is always carried out after + the user specified fail delay time. + ifQualified(2) - the fail delay action is carried out after + the user specified fail delay time + only if the FailDelayStatus is ok(3). + Otherwise (Fail DelayStatus warning(2)) 30 minutes after GPS was lost + a reference fault is signaled and the input is muted." + SYNTAX INTEGER + { + always(1), + ifQualified(2) + } + + FailDelayStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The current state of time drift prediction. + off(1) - not used + warning(2) - Availability of GPS not sufficient for time drift prediction + ok(3) - Time drift prediction is functional." + SYNTAX INTEGER + { + off(1), + warning(2), + ok(3) + } + + +-- +-- Node definitions +-- + + rsXx8000 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The subtree for all transmitters of series 8000." + ::= { rsProdBroadcastTransmitter 167 } + + + rsXx8000Common OBJECT-IDENTITY + STATUS current + DESCRIPTION + "This is the subtree for values which every equipement of series 8000 suports." + ::= { rsXx8000 1 } + + +-- ***************************************************************************** +-- ** object definitions +-- ***************************************************************************** + rsXx8000CommonObjs OBJECT IDENTIFIER ::= { rsXx8000Common 1 } + + +-- ***************************************************************************** +-- ** product information +-- ***************************************************************************** + productInformation OBJECT IDENTIFIER ::= { rsXx8000CommonObjs 1 } + + + serialNumber OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The serial number of the device." + ::= { productInformation 2 } + + + identNumberSW OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Rohde&Schwarz identification number of the software, for example 2094.2090.02." + ::= { productInformation 3 } + + + versionNumberSW OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Rohde&Schwarz revision number of the software, for example 1.2.1." + ::= { productInformation 4 } + + + identNumberHW OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Rohde&Schwarz identification number of the hardware, for example 2095.8007.02 (NetCCU)." + ::= { productInformation 5 } + + + versionNumberHW OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Rohde&Schwarz revision number (product index) of the hardware, for example 03.03." + ::= { productInformation 6 } + + +-- ***************************************************************************** +-- ** SNMP configuration +-- ***************************************************************************** + snmpConfig OBJECT IDENTIFIER ::= { rsXx8000CommonObjs 2 } + + + trapSinkTable OBJECT-TYPE + SYNTAX SEQUENCE OF TrapSinkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is for configuration of trapsinks - the IP-addresses where traps/informs are sent to. + + This table gives you possibility for easier remote configuration of trapsinks. + Another way, which is predefined by IETF, is to use the MIBs SNMP-TARGET and SNMP-NOTIFICATION." + ::= { snmpConfig 2 } + + + trapSinkEntry OBJECT-TYPE + SYNTAX TrapSinkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for a trapsink." + INDEX { trapSinkNumber } + ::= { trapSinkTable 1 } + + + TrapSinkEntry ::= + SEQUENCE { + trapSinkNumber + Integer32, + trapSinkVersion + INTEGER, + trapSinkAddress + IpAddress, + trapSinkPort + Integer32, + trapSinkCommunity + ReadableString, + trapSinkInformRetry + Integer32, + trapSinkInformTimeout + Integer32, + trapSinkInformUnacknowledged + Integer32, + trapSinkUse + TruthValue + } + + trapSinkNumber OBJECT-TYPE + SYNTAX Integer32 (1..5) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The arbitrary number in the list." + ::= { trapSinkEntry 1 } + + + trapSinkVersion OBJECT-TYPE + SYNTAX INTEGER + { + v1Trap(1), + v2Trap(2), + v2Inform(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The SNMP-version of sent out alarm. + 1: v1Trap + 2: v2Trap + 3: v2Inform" + ::= { trapSinkEntry 2 } + + + trapSinkAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP-Address of the SNMP manager to which the alarms are sent to." + ::= { trapSinkEntry 3 } + + + trapSinkPort OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port of the SNMP manager to which the alarms are sent to." + ::= { trapSinkEntry 4 } + + + trapSinkCommunity OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "community used in alarm" + ::= { trapSinkEntry 5 } + + + trapSinkInformRetry OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "only used for informs: + number of times to resend the inform" + ::= { trapSinkEntry 6 } + + + trapSinkInformTimeout OBJECT-TYPE + SYNTAX Integer32 (1..255) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "only used for informs: + timeout between retries" + ::= { trapSinkEntry 7 } + + + trapSinkInformUnacknowledged OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "only used for informs: + maximum number of waiting informs + if this is reached, the oldest pending inform is discarded" + ::= { trapSinkEntry 8 } + + + trapSinkUse OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "on/off-switch for this sink" + ::= { trapSinkEntry 9 } + + + sendTestTrap OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "1: idle + 2: Agent generates the trap 'testTrap', which is useful when checking the + connection between agent (NetCCU) and your trapsink." + ::= { snmpConfig 3 } + + + irtTrapsAllOn OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches all IRT-traps on - traps for all events are sent out. + + In detail, this means in the IRT-MIBs under branches *EventEnable all + OIDs are set to 1. + + Caution! + Setting this value influences remote controlling of devices. + Too many alarms may flood your network. Use this only for testing - for + operation, we suggest switch on only a few important traps." + ::= { snmpConfig 4 } + + + irtTrapsAllOff OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches all IRT-traps off - no traps are sent out. + + In detail, this means in the IRT-MIBs under branches *EventEnable all + OIDs are set to 2. + + Note: This is typically set when using only R&S-MIBs + and you don't need IRT-MIBs." + ::= { snmpConfig 5 } + + + rsTrapsAllOn OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches all R&S-traps on - traps for all events (info, warning, fault) are sent out. + + In detail, this means in the R&S-MIBs under *Events - Events*Table in + column event*Mask all OIDs are set to 1. + + Caution! + Enabling all traps is not recommended! + + Caution! + Setting this value influences remote controlling of devices! + Too many alarms may flood your network. Use this only for testing - for + operation, we suggest switch on only a few important traps. + + Caution! + This enables absolutely all R&S alarms! + Make sure you can handle it (network speed, routers, firewalls, NOC database performance etc.)." + ::= { snmpConfig 6 } + + + rsTrapsAllOff OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches all R&S-traps off - no traps are sent out. + + In detail, this means in the R&S-MIBs under *Events - Events*Table in + column event*Mask all OIDs are set to 2. + + Note: This is typically set when using only IRT-MIBs + and you don't need R&S-MIBs." + ::= { snmpConfig 7 } + + + rsTrapsAllFaultsOn OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches all R&S-traps for faults on - traps for all 'faults' are sent out. + + In detail, this means in the R&S-MIBs under *Events - Events*Table in + column event*Mask all 'fault'-OIDs are set to '1'. + These traps include the value 'fault(1)' in binding 'eventAlarmClass'. + + Note: This is the recommended setting when using R&S-MIBs. It gives you an + overview of the device state." + ::= { snmpConfig 8 } + + + rsTrapsAllFaultsOff OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches all R&S-traps for faults off - no traps for 'faults' are sent out. + + In detail, this means in the R&S-MIBs under *Events - Events*Table in + column event*Mask all 'fault'-OIDs are set to '2'. + These traps include the value 'fault(1)' in binding 'eventAlarmClass'." + ::= { snmpConfig 9 } + + + rsTrapsAllWarningsOn OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches all R&S-traps for warnings on - traps for all 'warnings' are sent out. + + In detail, this means in the R&S-MIBs under *Events - Events*Table in + column event*Mask all 'warning'-OIDs are set to '1'. + These traps include the value 'warning(2)' in binding 'eventAlarmClass'. + + Note: This is the recommended setting when using R&S-MIBs and you want much more + informations from the device than only faults. + + Caution! + This enables lots of alarms. + Make sure you can handle it (network speed, NOC database performance etc.)..." + ::= { snmpConfig 10 } + + + rsTrapsAllWarningsOff OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches all R&S-traps for warnings off - no traps for 'warnings' are sent out. + + In detail, this means in the R&S-MIBs under *Events - Events*Table in + column event*Mask all 'warning'-OIDs are set to '2'. + These traps include the value 'warning(2)' in binding 'eventAlarmClass'." + ::= { snmpConfig 11 } + + + transmitterConfig OBJECT IDENTIFIER ::= { rsXx8000CommonObjs 3 } + + + dateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The date and time for the transmitter. + + Notes: Deci-seconds different from 0 are ignored. + The range of distance from UTC is -12h..+14h. + Omitting the optional UTC fields in a set-request results in keeping the + old UTC offset values." + ::= { transmitterConfig 1 } + + + ntp OBJECT IDENTIFIER ::= { transmitterConfig 2 } + + + ntpMode OBJECT-TYPE + SYNTAX INTEGER + { + unknown(1), + disabled(2), + stepAdjust(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures the working mode of the NTP client. + disabled: no ntp synchronisation will be done + step: the time will synchronized every NTP sync-time + unknown: NTP mode is currently not determinable. This value must not be written." + ::= { ntp 1 } + + + ntpSyncTimeInterval OBJECT-TYPE + SYNTAX Integer32 (6..1440) + UNITS "minute" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the intervall, how often the NTP client will be synchronized to the NTP server. + Note: this is useful in step mode only ." + ::= { ntp 2 } + + + ntpServerAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF NtpServerAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table with server adresses. + Currently maximal one entry is allowed." + ::= { ntp 3 } + + + ntpServerAddrEntry OBJECT-TYPE + SYNTAX NtpServerAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for a ntpServerAddrTable." + INDEX { ntpServerAddrIdx } + ::= { ntpServerAddrTable 1 } + + + NtpServerAddrEntry ::= + SEQUENCE { + ntpServerAddrIdx + Integer32, + ntpServerAddress + ReadableString + } + + ntpServerAddrIdx OBJECT-TYPE + SYNTAX Integer32 (1) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "index for table entry." + ::= { ntpServerAddrEntry 1 } + + + ntpServerAddress OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "host name or IP address of server." + ::= { ntpServerAddrEntry 2 } + + + ntpState OBJECT-TYPE + SYNTAX INTEGER + { + unknown(1), + disabled(2), + enabled(3), + notRunning(4), + syncFailed(5), + synchronizing(6), + syncOk(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows the actual state of the NTP synchronisation." + ::= { ntp 4 } + + + ntpLastSync OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date/time of the last successful synchronisation." + ::= { ntp 5 } + + + swMaintenance OBJECT IDENTIFIER ::= { transmitterConfig 5 } + + + restart OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Restart the software of transmitter's control unit." + ::= { swMaintenance 1 } + + + swUpdate OBJECT IDENTIFIER ::= { swMaintenance 5 } + + + swUpdateStart OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Start software update tool at transmitter side in manual mode. The PC tool can only connect + to transmitter's control unit if the software update tool on the transmitter is started." + ::= { swUpdate 2 } + + + swUpdateMode OBJECT-TYPE + SYNTAX INTEGER + { + manual(1), + permanent(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Run mode of the software update tool at the transmitter side. + manual: Software update can be started with the Start button. It will stop automaticly after + an idle period of 90 seconds. + permanent: Software update is always running and will never stop." + ::= { swUpdate 3 } + + + swUpdateDeviceName OBJECT-TYPE + SYNTAX ReadableString (SIZE (0..30)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Device Name is dedicated to this control unit. It will be shown in the software update tool on the PC to differ devices." + ::= { swUpdate 4 } + + + swUpdateDeviceGroup OBJECT-TYPE + SYNTAX ReadableString (SIZE (0..30)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Device Group can be used to separate devices in large networks. + It must match the Device Group in software update tool on the PC." + ::= { swUpdate 5 } + + +-- ***************************************************************************** +-- ** event definitions +-- ***************************************************************************** + rsXx8000CommonEvents OBJECT IDENTIFIER ::= { rsXx8000Common 2 } + + + rsXx8000EventsV2 OBJECT IDENTIFIER ::= { rsXx8000CommonEvents 0 } + + + testTrap NOTIFICATION-TYPE + OBJECTS { serialNumber, counterEvents } + STATUS current + DESCRIPTION + "This trap is sent to check whether the trapsink is receiving any traps + from this agent. To trigger this trap, set 'sendTestTrap' to '2'." + ::= { rsXx8000EventsV2 1 } + + + eventTx OBJECT IDENTIFIER ::= { rsXx8000EventsV2 10 } + + + eventsTxV2 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Compatibility to SMIv1." + ::= { eventTx 0 } + + + swUpdateStarted NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Software update started. + The PC tool can only connect to transmitter's control unit if the software + update tool on the transmitter is started. It uses the network 17 (TCP and UDP)." + ::= { eventsTxV2 1 } + + + ntpSyncFailed NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NTP synchronisation failed." + ::= { eventsTxV2 2 } + + + eventsTxTable OBJECT-TYPE + SYNTAX SEQUENCE OF EventsTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains necessary information for handling alarms. + For each alarm you have the following information: + - name (get), + - mask to enable/disable sending out (set/get), + - priority (set/get) and + - the current state (get only)." + ::= { eventTx 1 } + + + eventsTxEntry OBJECT-TYPE + SYNTAX EventsTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An event entry always consists of 3 values: + - name: an enumerated list of all possible notifications + - mask: the corresponding mask (enable/disable) + - priority: the corresponding priority (value in range 0..255) + - event: the event itself (active/inactive)" + INDEX { eventTxNameIdx } + ::= { eventsTxTable 1 } + + + EventsTxEntry ::= + SEQUENCE { + eventTxNameIdx + EventMaxEntryNumber, + eventTxName + INTEGER, + eventTxMask + EventMask, + eventTxPriority + EventPriority, + eventTxEvent + EventState + } + + eventTxNameIdx OBJECT-TYPE + SYNTAX EventMaxEntryNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The event number as integer. + This is a helper column and therefore not-accessible." + ::= { eventsTxEntry 1 } + + + eventTxName OBJECT-TYPE + SYNTAX INTEGER + { + swUpdateStarted(1), + ntpSyncFailed(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The event number as integer and the value as readable text. + The enumeration correlates with the notifications under eventsTxV2." + ::= { eventsTxEntry 2 } + + + eventTxMask OBJECT-TYPE + SYNTAX EventMask + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "See TextualConvention for details." + ::= { eventsTxEntry 3 } + + + eventTxPriority OBJECT-TYPE + SYNTAX EventPriority + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "See TextualConvention for details." + ::= { eventsTxEntry 4 } + + + eventTxEvent OBJECT-TYPE + SYNTAX EventState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "See TextualConvention for details." + ::= { eventsTxEntry 5 } + + + eventHistory OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Information about sent out events." + ::= { rsXx8000CommonEvents 1 } + + + counterEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of traps sent out. + This is an increasing value." + ::= { eventHistory 1 } + + + eventHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF EventHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of the last 100 messages sent out." + ::= { eventHistory 2 } + + + eventHistoryEntry OBJECT-TYPE + SYNTAX EventHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An event entry." + INDEX { eventHistoryNumber } + ::= { eventHistoryTable 1 } + + + EventHistoryEntry ::= + SEQUENCE { + eventHistoryNumber + Integer32, + eventHistoryModule + INTEGER, + eventHistoryEvent + Integer32, + eventHistoryEventState + EventState, + eventHistoryEventDate + DateAndTime, + eventHistoryTx + IndexTransmitter + } + + eventHistoryNumber OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The trap number." + ::= { eventHistoryEntry 1 } + + + eventHistoryModule OBJECT-TYPE + SYNTAX INTEGER + { + switchoverUnit(1), + netccu(2), + exciterA(3), + exciterB(4), + outputstageA(5), + outputstageB(6), + dvbReceiver(7), + pumpA(8), + pumpB(9), + antenna(10), + gps(11), + dvbRecMon(12), + gpParIO(13), + program(14) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This column indicates the physical module the corresponding message is for." + ::= { eventHistoryEntry 2 } + + + eventHistoryEvent OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This column indicates the event. + In correlation with column eventHistoryModule, you can see the name of the event here. + For this, you need to have a look at the event definitions of the corresponding MIB. + + Example: + For a DVB transmitter an entry in eventHistoryModule is netccu(2) and + the value in eventHistoryEvent is 1. + A look at eventsTxV2 of RS-XX8000-DVB-TX-MIB shows, 1 is txSummaryFault." + ::= { eventHistoryEntry 3 } + + + eventHistoryEventState OBJECT-TYPE + SYNTAX EventState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "See TextualConvention for details." + ::= { eventHistoryEntry 4 } + + + eventHistoryEventDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This column indicates the date and time of the event." + ::= { eventHistoryEntry 5 } + + + eventHistoryTx OBJECT-TYPE + SYNTAX IndexTransmitter + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmitter index in case of NTx or Np1 systems. + For variants with one transmitter only (SingleTx) this index is always transmitterB(1)." + ::= { eventHistoryEntry 101 } + + +-- The following objects are ment only for internal use. +-- They are used to store values for notification bindings. + eventMapObjects OBJECT IDENTIFIER ::= { rsXx8000CommonEvents 3 } + + + eventAlarmPriority OBJECT-TYPE + SYNTAX EventPriority + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This OID holds the value for the priority when sending out a notification." + ::= { eventMapObjects 1 } + + + eventAlarmClass OBJECT-TYPE + SYNTAX EventClass + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "See TextualConvention for details." + ::= { eventMapObjects 2 } + + + eventEvent OBJECT-TYPE + SYNTAX EventState + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This OID holds the value for the event itself when sending out a notification." + ::= { eventMapObjects 3 } + + + indexTransmitter OBJECT-TYPE + SYNTAX IndexTransmitter + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This OID holds the value for the transmitter when sending out a notification." + ::= { eventMapObjects 4 } + + + indexAB OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This OID holds the value for the module A (exciterA, outputstageA) or + B (exciterB, outputstageB) when sending out a notification." + ::= { eventMapObjects 5 } + + + indexRack OBJECT-TYPE + SYNTAX IndexRack + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This OID holds the value for the rack when sending out a notification." + ::= { eventMapObjects 6 } + + + indexAmplifier OBJECT-TYPE + SYNTAX IndexAmplifier + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This OID holds the value for the amplifier when sending out a notification." + ::= { eventMapObjects 7 } + + + indexProgram OBJECT-TYPE + SYNTAX IndexProgram + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This object holds the value for the program when sending out a notification." + ::= { eventMapObjects 8 } + + +-- ***************************************************************************** +-- ** conformance statements +-- ***************************************************************************** + rsXx8000CommonConf OBJECT IDENTIFIER ::= { rsXx8000Common 3 } + + + rsXx8000CommonGroups OBJECT IDENTIFIER ::= { rsXx8000CommonConf 1 } + + + groupNotifyTest NOTIFICATION-GROUP + NOTIFICATIONS { testTrap } + STATUS current + DESCRIPTION + "test notifications." + ::= { rsXx8000CommonGroups 1 } + + + groupNotify NOTIFICATION-GROUP + NOTIFICATIONS { swUpdateStarted } + STATUS current + DESCRIPTION + "notifications for all transmitters." + ::= { rsXx8000CommonGroups 2 } + + + groupEventTest OBJECT-GROUP + OBJECTS { sendTestTrap } + STATUS current + DESCRIPTION + "The objects sent with testTrap." + ::= { rsXx8000CommonGroups 6 } + + + groupEventHistory OBJECT-GROUP + OBJECTS { counterEvents, eventHistoryModule, eventHistoryEvent, eventHistoryEventState, eventHistoryEventDate, + eventHistoryTx } + STATUS current + DESCRIPTION + "Contains all objects from 'eventHistory'." + ::= { rsXx8000CommonGroups 8 } + + + groupEventObjects OBJECT-GROUP + OBJECTS { eventTxName, eventTxMask, eventTxPriority, eventTxEvent, eventAlarmPriority, + eventAlarmClass, eventEvent, indexTransmitter, indexAB, indexRack, + indexAmplifier, indexProgram } + STATUS current + DESCRIPTION + "Contains all objects from 'eventMapObjects'." + ::= { rsXx8000CommonGroups 9 } + + + groupProductInformation OBJECT-GROUP + OBJECTS { serialNumber, identNumberSW, versionNumberSW, identNumberHW, versionNumberHW + } + STATUS current + DESCRIPTION + "Contains all objects from 'productInformation' (R&S typeplate)." + ::= { rsXx8000CommonGroups 11 } + + + groupSnmpConfig OBJECT-GROUP + OBJECTS { trapSinkVersion, trapSinkAddress, trapSinkPort, trapSinkCommunity, trapSinkInformRetry, + trapSinkInformTimeout, trapSinkUse, irtTrapsAllOn, irtTrapsAllOff, rsTrapsAllOn, + rsTrapsAllOff, rsTrapsAllFaultsOn, rsTrapsAllFaultsOff, rsTrapsAllWarningsOn, rsTrapsAllWarningsOff + } + STATUS current + DESCRIPTION + "Contains all objects from 'snmpConfig'." + ::= { rsXx8000CommonGroups 12 } + + + groupTransmitterConfig OBJECT-GROUP + OBJECTS { dateTime } + STATUS current + DESCRIPTION + "objects from 'transmitterConfig'." + ::= { rsXx8000CommonGroups 13 } + + + groupNTP OBJECT-GROUP + OBJECTS { ntpMode, ntpSyncTimeInterval, ntpServerAddress, ntpState, ntpLastSync + } + STATUS current + DESCRIPTION + "objects from 'ntp'" + ::= { rsXx8000CommonGroups 14 } + + + groupSwMaintenance OBJECT-GROUP + OBJECTS { restart, swUpdateStart, swUpdateMode, swUpdateDeviceName, swUpdateDeviceGroup + } + STATUS current + DESCRIPTION + "objects from 'swMaintenance'" + ::= { rsXx8000CommonGroups 15 } + + + groupNotifyNTP NOTIFICATION-GROUP + NOTIFICATIONS { ntpSyncFailed } + STATUS current + DESCRIPTION + "Notifications from the NTP client." + ::= { rsXx8000CommonGroups 16 } + + + groupObsoletedObjects OBJECT-GROUP + OBJECTS { trapSinkInformUnacknowledged } + STATUS obsolete + DESCRIPTION + "Description." + ::= { rsXx8000CommonGroups 17 } + + + rsXx8000CommonCompls OBJECT IDENTIFIER ::= { rsXx8000CommonConf 2 } + + + xx8000BasicCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for XX8000 entities which implement this MIB module." + MODULE -- this module + MANDATORY-GROUPS { groupNotifyTest, groupNotify, groupEventTest, groupEventHistory, groupEventObjects, + groupProductInformation, groupSnmpConfig, groupTransmitterConfig, groupSwMaintenance } + GROUP groupNTP + DESCRIPTION + "only for transmitters with NetCCU" + GROUP groupNotifyNTP + DESCRIPTION + "only for transmitters with NetCCU" + ::= { rsXx8000CommonCompls 1 } + + + + END diff --git a/MIBS/rs/RS-XX8000-DVB-TX-MIB b/MIBS/rs/RS-XX8000-DVB-TX-MIB new file mode 100644 index 0000000..2f57141 --- /dev/null +++ b/MIBS/rs/RS-XX8000-DVB-TX-MIB @@ -0,0 +1,7049 @@ +-- ***************************************************************************** +-- ***************************************************************************** +-- ** +-- ** COPYRIGHT (c) 2006 Rohde & Schwarz GmbH & Co. KG +-- ** Muehldorfstrasse 15 +-- ** R & S D-81671 Muenchen +-- ** +-- ***************************************************************************** +-- ** +-- ** MODULE RS-XX8000-DVB-TX-MIB +-- ** +-- ** DESCRIPTION Rohde & Schwarz SNMP +-- ** +-- ** HISTORY +-- ** +-- ** 2006-11-28 hue - initial version +-- ** 2007-03-08 hue - added low power, sorted groups +-- ** 2007-07-11 sr - added cmdTxDelayTimeExcAutomatic, +-- ** cmdTxDelayTimeOstAutomatic, +-- ** cmdExcTypeLossOfInput, +-- ** cmdOstMaxOutletTempThreshold, +-- ** forwardPowerOstA, forwardPowerOstB, +-- ** reflectedPowerOstA, reflectedPowerOstB, +-- ** renamed ostRackTable to ostTable, +-- ** ostRackEntry to ostEntry, +-- ** added ostRackAmp... nodes +-- ** added productInfoTable, rfProbesTable +-- ** defined alarm class for txAutomaticExcChanged, +-- ** txAutomaticOstChanged +-- ** added groupProductInfo, groupAmpMeasureValues, +-- ** groupRfProbes, groupSingleTxLPNoNetCCU, +-- ** groupAlarmSingleTxLPNoNetCCU, +-- ** rsXx8000DVBSingleTxLPNoNetCCU +-- ** 2007-08-09 kp - expansion of ProductInfoTable +-- ** 2007-09-10 sr - remove forwardPowerOstA and reflectedPowerOstA +-- ** from groupSingleTxMP and groupDualDriveMP +-- ** 2007-12-07 sr - cmdExcSFNStaticDelay to FloatingPoint +-- ** cmdExcSFNDeviationTime changed range +-- ** - new exciter commands for RfOutput, RfIqAdjust and Precorrection +-- ** - rename prodInfoDeviceNameIdx to prodInfoModuleIdx and +-- ** prodInfoDeviceName to prodInfoModuleName +-- ** using TC ProdInfoModuleNameTv with a new value for netCCU +-- ** - rename txNetCCUBoardTemperatureWarning to +-- ** txNetCCUBoardTemperatureFault +-- ** - new OBJECT-GROUPs groupExciterStatus and groupExciterPrecorrection +-- ** 2008-03-31 sr - change range of cmdTxDelayTimeExcAutomatic and +-- ** cmdTxDelayTimeOstAutomatic to 1..60 +-- ** ks - SLx extension +-- ** 2008-05-05 sr - cmdExcReferenceSource with value internGPS +-- ** 2008-06-11 ks - cmdExcInput1Source, cmdExcInput2Source added +-- ** 2008-07-23 sr - new SLx parameters: cmdExcTimeScheduler, configurationTable and +-- ** timeSchedulerTable +-- ** - new SFN Delay parameters in exciterStatusTable +-- ** 2008-08-26 ks - rfProbesNetCCURfProbe1, rfProbesNetCCURfProbe2 read-only +-- ** - cmdTxParametersetReSave obsolete +-- ** 2008-07-29 hu - changed TextualConvention for Exciter LogbookEntryMessages +-- ** 2008-09-10 sr - new rackTable +-- ** - new txRackRfWarning, txRackRfFault, txRackReflectionWarning, +-- ** txRackReflectionFault +-- ** - new groupIndependentRacks +-- ** 2008-10-08 sr - cmdExcFrequency and configFrequency range up to 1500 MHz +-- ** 2008-10-23 ks - new: cmdExcInpAutoReadyAfterChangeOv, +-- ** txExcInputAutomaticSwitchReady, txExcInputAutomaticChangedOver +-- ** 2008-12-12 sr - rfProbeConfigurationLabel obsolete +-- ** - txRackExtCoolingWarning renamed to txRackGpiWarning +-- ** - txRackExtCoolingFault renamed to txRackGpiFault +-- ** 2009-01-06 sr - rfProbeCalibrationSetGain, rfProbeCalibrationSetOffset +-- ** 2009-02-12 sr - InputSource with value tp +-- ** - new groupExcCommandsAdditional +-- ** 2009-03-30 ks - txRackProbeNotCalibrated added +-- ** - txParamSetSubDeviceDiffers obsoleted +-- ** 2009-05-28 ks -information for additional (external) power supply added +-- ** - txRackRfOn, txRackRfOk, txRackTemperatureWarning added +-- ** 2009-06-17 ks - object groups, notification groups and +-- ** module compliances reorganized +-- ** 2009-06-26 ks - consideration of face-lift configuration in module compliances +-- ** - measured values for power supply added +-- ** - cmdExcInputAutoSwitch obsoleted +-- ** - conditional groupDummyLoadRF added +-- ** 2009-07-16 ks - additional values for reserve concept 'backup exciter' +-- ** 2009-09-10 ks - cmdTxSystemMode added +-- ** - traps for TX mode switch over added +-- ** 2009-10-08 ks - txRackOvervoltProtectWarning added +-- ** - cmdExcInputAutoSwitch obsoleted +-- ** 2009-11-13 ks - ostRackAmpDeltaPhase, ostRackAmpCmdDeltaPhase added +-- ** 2009-11-26 ks - cmdExcRfFailLimit, cmdExcRfWarningLimit added +-- ** 2009-11-27 ks - cmdExcInputFailDelayTime added +-- ** 2009-11-30 ks - cmdExcMonitoringOutput, cmdExcOcxoAdjust added +-- ** 2009-12-01 ks - configRxFrequency, configInputSource added +-- ** 2009-12-04 ks - configuration2Table added +-- ** 2009-12-07 ks - excStatusNominalPower added +-- ** 2009-12-18 ks - txExcRfOk added +-- ** 2010-01-12 ks - excStatusVSWR added +-- ** 2010-01-29 ks - txNetCCUBoardTemperatureFault deprecated, +-- ** txNetCCUBoardTemperatureWarning added +-- ** 2010-02-02 ks - cmdExcExpectInputReserve, txExcInputReseveMissing added +-- ** 2010-20-04 ks - cmdExcMuteCondition added +-- ** 2010-05-21 ks - cmdTxRfSwitch added +-- ** 2010-10-13 ks - cmdExcEnablePcrReset, cmdExcTimeForDailyPcrReset added +-- ** 2010-12-02 ks - excStatusAmplifierControl, excStatusReqDataRateHP, +-- ** excStatusReqDataRateLP added +-- ** 2011-02-28 ks - Amplifier status for Sx801 added. +-- ** 2011-05-12 ks - cmdExcFailDelayMode, excStatusFailDelay added +-- ** 2012-09-03 ks - sx801AmplifierTable measured values added +-- ** 2012-11-01 ks - Hierarchical input is no longer supported. +-- ***************************************************************************** +-- ***************************************************************************** + + RS-XX8000-DVB-TX-MIB DEFINITIONS ::= BEGIN + + IMPORTS + rsXx8000, eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, + indexRack, indexAmplifier, rsXx8000MibModule, ReadableString, FloatingPoint, + LogbookEntryMessagesNetCCU, LogbookEntryMessagesOST, LogbookEntrySlope, EventMaxEntryNumber, SwitchOnOff, + Trigger, EventMask, EventPriority, EventState, EventClass, + IndexRack, IndexAmplifier, IndexAB, LogbookMaxEntryNumber, ProdInfoModuleNameTv, + EqualizerCalibrationState, TvStandard, LogbookEntryMessagesExcTv, InputSource, TimeOfDay, + Sx801AmplifierState, FailDelayMode, FailDelayStatus + FROM RS-XX8000-COMMON-MIB + OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP + FROM SNMPv2-CONF + Integer32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE + FROM SNMPv2-SMI + DateAndTime, TruthValue, RowStatus + FROM SNMPv2-TC; + + + rsXx8000DvbTxMibModule MODULE-IDENTITY + LAST-UPDATED "201211010800Z" -- November 01, 2012 at 08:00 GMT + ORGANIZATION + "Rohde&Schwarz GmbH & Co. KG" + CONTACT-INFO + "Torsten Huebscher + Department 7TS2 + Broadcasting Division + Muehldorfstrasse 15 + 81671 Munich, Germany + torsten.huebscher@rohde-schwarz.com" + DESCRIPTION + "This MIB defines transmitting systems from Rohde & Schwarz. + + Use this MIB if your system meets the following requirements: + - series XX8000 (NetCCU800), + - DVB, + - transmitter reserve concept SingleTx, DualDrive, + Active Reserve or Passive Reserve. + + The following MIBs are related to this: + - RS-COMMON-MIB - mandatory for this MIB + - RS-XX8000-COMMON-MIB - mandatory for this MIB" + REVISION "201211010800Z" -- November 01, 2012 at 08:00 GMT + DESCRIPTION + "Hierarchical input is no longer supported." + REVISION "201209030800Z" -- September 03, 2012 at 08:00 GMT + DESCRIPTION + "sx801AmplifierTable measured values added" + REVISION "201105120800Z" -- May 12, 2011 at 08:00 GMT + DESCRIPTION + "cmdExcFailDelayMode, excStatusFailDelay added" + REVISION "201102280800Z" -- February 28, 2011 at 08:00 GMT + DESCRIPTION + "Amplifier status for Sx801 added." + REVISION "201012020800Z" -- December 02, 2010 at 08:00 GMT + DESCRIPTION + "excStatusAmplifierControl, excStatusReqDataRateHP, + excStatusReqDataRateLP added" + REVISION "201010130800Z" -- October 13, 2010 at 08:00 GMT + DESCRIPTION + "cmdExcEnablePcrReset, cmdExcTimeForDailyPcrReset added" + REVISION "201005210800Z" -- May 21, 2010 at 08:00 GMT + DESCRIPTION + "cmdTxRfSwitch added" + REVISION "201004160800Z" -- April 16, 2010 at 08:00 GMT + DESCRIPTION + "cmdExcMuteCondition added" + REVISION "201002020800Z" -- February 02, 2010 at 08:00 GMT + DESCRIPTION + "cmdExcExpectInputReserve, txExcInputReseveMissing added" + REVISION "201001290800Z" -- January 29, 2010 at 08:00 GMT + DESCRIPTION + "txNetCCUBoardTemperatureFault deprecated, + txNetCCUBoardTemperatureWarning added" + REVISION "201001120800Z" -- January 12, 2010 at 08:00 GMT + DESCRIPTION + "excStatusVSWR added" + REVISION "200912180800Z" -- December 18, 2009 at 08:00 GMT + DESCRIPTION + "txExcRfOk added" + REVISION "200911260800Z" -- November 26, 2009 at 08:00 GMT + DESCRIPTION + "cmdExcRfFailLimit, cmdExcRfWarningLimit, + cmdExcInputFailDelayTime, cmdExcMonitoringOutput, + cmdExcOcxoAdjust, configRxFrequency, + configInputSource, configuration2Table, + excStatusNominalPower added" + REVISION "200911130800Z" -- November 13, 2009 at 08:00 GMT + DESCRIPTION + "ostRackAmpDeltaPhase, ostRackAmpCmdDeltaPhase added" + REVISION "200910080800Z" -- October 08, 2009 at 08:00 GMT + DESCRIPTION + "txRackOvervoltProtectWarning added + cmdExcInputAutoSwitch obsoleted" + REVISION "200909100800Z" -- September 10, 2009 at 08:00 GMT + DESCRIPTION + "cmdTxSystemMode added + traps for TX mode switch over added" + REVISION "200907160800Z" -- July 16, 2009 at 08:00 GMT + DESCRIPTION + "additional values for reserve concept 'backup exciter'" + REVISION "200906260800Z" -- June 26, 2009 at 08:00 GMT + DESCRIPTION + "consideration of face-lift configuration in module compliances, + measured values for power supply added, + cmdExcInputAutoSwitch obsoleted, + conditional groupDummyLoadRF added" + REVISION "200906170900Z" -- June 17, 2009 at 09:00 GMT + DESCRIPTION + "object groups, notification groups and module compliances reorganized" + REVISION "200905280900Z" -- May 28, 2009 at 09:00 GMT + DESCRIPTION + "information for additional (external) power supply added + txRackRfOn, txRackRfOk, txRackTemperatureWarning added" + REVISION "200903300900Z" -- March 30, 2009 at 09:00 GMT + DESCRIPTION + "txRackProbeNotCalibrated added + txParamSetSubDeviceDiffers obsoleted" + REVISION "200902121500Z" -- February 12, 2009 at 15:00 GMT + DESCRIPTION + "- InputSource with value tp + - new groupExcCommandsAdditional" + REVISION "200901290900Z" -- January 29, 2009 at 09:00 GMT + DESCRIPTION + "MODULE COMPLIANCE rsXx8000DVBReEquip" + REVISION "200901061600Z" -- January 06, 2009 at 16:00 GMT + DESCRIPTION + "rfProbeCalibrationSetGain, rfProbeCalibrationSetOffset" + REVISION "200812121430Z" -- December 12, 2008 at 14:30 GMT + DESCRIPTION + "rfProbeConfigurationLabel obsolete + txRackExtCoolingWarning renamed to txRackGpiWarning + txRackExtCoolingFault renamed to txRackGpiFault" + REVISION "200810230800Z" -- October 23, 2008 at 08:00 GMT + DESCRIPTION + "cmdExcInpAutoReadyAfterChangeOv + txExcInputAutomaticSwitchReady, txExcInputAutomaticChangedOver" + REVISION "200810081030Z" -- October 08, 2008 at 10:30 GMT + DESCRIPTION + "cmdExcFrequency and configFrequency range up to 1500 MHz" + REVISION "200809101500Z" -- September 10, 2008 at 15:00 GMT + DESCRIPTION + "new rackTable + new txRackRfWarning, txRackRfFault, txRackReflectionWarning, + txRackReflectionFault + new groupIndependentRacks" + REVISION "200808291000Z" -- August 29, 2008 at 10:00 GMT + DESCRIPTION + "changed TextualConvention for Exciter LogbookEntryMessages" + REVISION "200808260900Z" -- August 26, 2008 at 09:00 GMT + DESCRIPTION + "- rfProbesNetCCURfProbe1, rfProbesNetCCURfProbe2 read-only + - cmdTxParametersetReSave obsolete" + REVISION "200807231000Z" -- July 23, 2008 at 10:00 GMT + DESCRIPTION + "- new SLx parameters: cmdExcTimeScheduler, configurationTable and + timeSchedulerTable + - new SFN Delay parameters in exciterStatusTable" + REVISION "200805050930Z" -- May 05, 2008 at 09:30 GMT + DESCRIPTION + "- cmdExcReferenceSource with value internGPS + - cmdExcInput1Source, cmdExcInput2Source added" + REVISION "200803311100Z" -- March 31, 2008 at 11:00 GMT + DESCRIPTION + "- change range of cmdTxDelayTimeExcAutomatic and + cmdTxDelayTimeOstAutomatic to 1..60 + - adds cmdExcTransmitterType, cmdExcOutputPower + excPrecUserState, excPrecFactoryState, excPrecRestoreCurrentSettings, excPrecRestoreAllSettings" + REVISION "200712071700Z" -- December 07, 2007 at 17:00 GMT + DESCRIPTION + "- cmdExcSFNStaticDelay to FloatingPoint + cmdExcSFNDeviationTime changed range + - new exciter commands for RfOutput, RfIqAdjust and Precorrection + - rename prodInfoDeviceNameIdx to prodInfoModuleIdx and + prodInfoDeviceName to prodInfoModuleName + using TC ProdInfoModuleNameTv with a new value for netCCU + - rename txNetCCUBoardTemperatureWarning to + txNetCCUBoardTemperatureFault + - new OBJECT-GROUPs groupExciterStatus and groupExciterPrecorrection" + REVISION "200709101100Z" -- September 10, 2007 at 11:00 GMT + DESCRIPTION + "remove forwardPowerOstA and reflectedPowerOstA from groupSingleMP and groupDualDriveMP" + REVISION "200708091400Z" -- August 09, 2007 at 14:00 GMT + DESCRIPTION + "Expansion of ProductInfoTable" + REVISION "200707111600Z" -- July 11, 2007 at 16:00 GMT + DESCRIPTION + "added cmdTxDelayTimeExcAutomatic, + cmdTxDelayTimeOstAutomatic, + cmdExcTypeLossOfInput, + cmdOstMaxOutletTempThreshold, + forwardPowerOstA, forwardPowerOstB, + reflectedPowerOstA, reflectedPowerOstB, + renamed ostRackTable to ostTable, + ostRackEntry to ostEntry, + added ostRackAmp... nodes + added productInfoTable, rfProbesTable + defined alarm class for txAutomaticExcChanged, + txAutomaticOstChanged + added groupProductInfo, groupAmpMeasureValues, + groupRfProbes, groupSingleTxLPNoNetCCU, + groupAlarmSingleTxLPNoNetCCU, + rsXx8000DVBSingleTxLPNoNetCCU" + REVISION "200703081000Z" -- March 08, 2007 at 10:00 GMT + DESCRIPTION + "- Added LowPower + - Sorted groups" + REVISION "200612211000Z" -- December 21, 2006 at 10:00 GMT + DESCRIPTION + "This is the initial version." + ::= { rsXx8000MibModule 3 } + + + + +-- +-- Node definitions +-- + + rsXx8000DvbTx OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Xx8000 DVB transmitter." + ::= { rsXx8000 4 } + + +-- ***************************************************************************** +-- ** object definitions +-- ***************************************************************************** + rsXx8000DvbTxObjs OBJECT IDENTIFIER ::= { rsXx8000DvbTx 1 } + + + commandsTxTable OBJECT-TYPE + SYNTAX SEQUENCE OF CommandsTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains important commands for the transmitter." + ::= { rsXx8000DvbTxObjs 1 } + + + commandsTxEntry OBJECT-TYPE + SYNTAX CommandsTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for a designated transmitter and device." + INDEX { cmdDeviceIdx } + ::= { commandsTxTable 1 } + + + CommandsTxEntry ::= + SEQUENCE { + cmdTxResetSumFault + Trigger, + cmdTxParametersetLoad + Integer32, + cmdTxParametersetSave + Integer32, + cmdTxParametersetReSave + Trigger, + cmdTxOperationModeProgram + SwitchOnOff, + cmdTxOperationModeReserve + SwitchOnOff, + cmdTxOpModeExcAutomatic + SwitchOnOff, + cmdTxOpModeOstAutomatic + SwitchOnOff, + cmdTxPreselectExciter + IndexAB, + cmdTxPreselectOutputstage + INTEGER, + cmdTxDelayTimeExcAutomatic + Integer32, + cmdTxDelayTimeOstAutomatic + Integer32, + cmdTxRfSwitch + INTEGER, + cmdTxSystemMode + TvStandard, + cmdTxProgramExciterPrio + SwitchOnOff, + cmdTxChangeOver + Trigger, + cmdTxSwitchPosition + INTEGER, + cmdDeviceIdx + IndexAB, + cmdExcOpModeInputAutomatic + SwitchOnOff, + cmdExcPreselectInput + INTEGER, + cmdExcMode + INTEGER, + cmdExcNetworkMode + INTEGER, + cmdExcTPSSource + INTEGER, + cmdExcEnableCellID + SwitchOnOff, + cmdExcTxAddress + Integer32, + cmdExcTxAutomatic + SwitchOnOff, + cmdExcInputAutoSwitch + SwitchOnOff, + cmdExcInputSeamless + SwitchOnOff, + cmdExcInputPriority + INTEGER, + cmdExcInputCheckTimeForward + Integer32, + cmdExcInputCheckTimeSwitchback + Integer32, + cmdExcInputMuteOnFail + INTEGER, + cmdExcInputManualPreseletionHP1 + INTEGER, + cmdExcInputManualPreseletionHP2 + INTEGER, + cmdExcInputManualPreseletionLP1 + INTEGER, + cmdExcInputManualPreseletionLP2 + INTEGER, + cmdExcTPSManualBandwidth + INTEGER, + cmdExcTPSManualFFTLength + INTEGER, + cmdExcTPSManualGuardInterval + INTEGER, + cmdExcTPSManualConstellation + INTEGER, + cmdExcTPSManualAlpha + INTEGER, + cmdExcTPSManualCellID + Integer32, + cmdExcTPSManualInterleaver + INTEGER, + cmdExcTPSManualCoderateHP + INTEGER, + cmdExcTPSManualCoderateLP + INTEGER, + cmdExcTPSManualTimeSlicingHP + SwitchOnOff, + cmdExcTPSManualTimeSlicingLP + SwitchOnOff, + cmdExcTPSManualFECHP + SwitchOnOff, + cmdExcTPSManualFECLP + SwitchOnOff, + cmdExcSFNStaticDelay + FloatingPoint, + cmdExcSFNDeviationTime + Integer32, + cmdExcFrequency + Integer32, + cmdExcReferenceSource + INTEGER, + cmdExcMuteOnPPSFail + INTEGER, + cmdExcMuteOnReferenceFail + INTEGER, + cmdExcRefFailDelayTime + Integer32, + cmdExcTypeLossOfInput + INTEGER, + cmdExcRfOutput + SwitchOnOff, + cmdExcRfOutputRegulation + SwitchOnOff, + cmdExcRfOutputManualRfLevel + FloatingPoint, + cmdExcRfOutputAttenuation + Integer32, + cmdExcRfOutputRfSlope + FloatingPoint, + cmdExcRfOutputModulationSlope + FloatingPoint, + cmdExcRfIqAdjustStart + INTEGER, + cmdExcRfIqAdjustTestsignal + SwitchOnOff, + cmdExcRfIqAdjustBiasCoarseI + Integer32, + cmdExcRfIqAdjustBiasCoarseQ + Integer32, + cmdExcRfIqAdjustBiasFineI + Integer32, + cmdExcRfIqAdjustBiasFineQ + Integer32, + cmdExcRfIqAdjustGainI + Integer32, + cmdExcRfIqAdjustGainQ + Integer32, + cmdExcRfIqAdjustPhase + FloatingPoint, + cmdExcInput1Source + InputSource, + cmdExcInput2Source + InputSource, + cmdExcInpAutoReadyAfterChangeOv + SwitchOnOff, + cmdExcInputFailDelayTime + Integer32, + cmdExcTransmitterType + INTEGER, + cmdExcTimeScheduler + SwitchOnOff, + cmdExcMuteCondition + INTEGER, + cmdExcRfWarningLimit + FloatingPoint, + cmdExcRfFailLimit + FloatingPoint, + cmdExcOutputPower + FloatingPoint, + cmdOstRefVoltageVision + FloatingPoint, + cmdOstMaxOutletTempThreshold + Integer32, + cmdExcMonitoringOutput + INTEGER, + cmdExcOcxoAdjust + Integer32, + cmdExcExpectInputReserve + SwitchOnOff, + cmdExcEnablePcrReset + SwitchOnOff, + cmdExcTimeForDailyPcrReset + TimeOfDay, + cmdExcFailDelayMode + FailDelayMode + } + + cmdTxResetSumFault OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Reset all faults (in all modules) of the transmitter. + + You reset a designated transmitter (NetCCU, Exciters, Outputstages). + An equivalent would be pressing RESET at this transmitters frontpanel. + + A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything." + ::= { commandsTxEntry 1 } + + + cmdTxParametersetLoad OBJECT-TYPE + SYNTAX Integer32 (1..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This loads the desired parameter set." + ::= { commandsTxEntry 2 } + + + cmdTxParametersetSave OBJECT-TYPE + SYNTAX Integer32 (1..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This saves the current settings to a designated parameter set." + ::= { commandsTxEntry 3 } + + + cmdTxParametersetReSave OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "This saves the changes to the current parameter set." + ::= { commandsTxEntry 4 } + + + cmdTxOperationModeProgram OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches the program path of the transmitter on/off." + ::= { commandsTxEntry 5 } + + + cmdTxOperationModeReserve OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches the reserve path of the transmitter on/off." + ::= { commandsTxEntry 6 } + + + cmdTxOpModeExcAutomatic OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches the exciter automatic on/off." + ::= { commandsTxEntry 7 } + + + cmdTxOpModeOstAutomatic OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches the outputstage automatic on/off. + + This paramter is only available for systems with an automatic output switch." + ::= { commandsTxEntry 8 } + + + cmdTxPreselectExciter OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets exciterA or exciterB to program path (antenna) of the transmitter." + ::= { commandsTxEntry 9 } + + + cmdTxPreselectOutputstage OBJECT-TYPE + SYNTAX INTEGER + { + outputstageA(1), + outputstageB(2), + bothToAntenna(3), + bothToDummyLoad(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets + - outputstageA or + - outputstageB or + - both + to program path (antenna) of the transmitter, + or it sets both to dummyload. + + The settings bothToAntenna(3) and bothToDummyLoad(4) are only settable + for ActiveReserve systems. + + This paramter is only available for systems with an automatic output switch." + ::= { commandsTxEntry 10 } + + + cmdTxDelayTimeExcAutomatic OBJECT-TYPE + SYNTAX Integer32 (1..60) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the exciter automatic delay time." + ::= { commandsTxEntry 11 } + + + cmdTxDelayTimeOstAutomatic OBJECT-TYPE + SYNTAX Integer32 (1..60) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the outputstage automatic delay time. + + This paramter is only available for systems with an automatic output switch." + ::= { commandsTxEntry 12 } + + + cmdTxRfSwitch OBJECT-TYPE + SYNTAX INTEGER + { + antenna(1), + dummyLoad(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "RF switch for single-ended systems." + ::= { commandsTxEntry 13 } + + + cmdTxSystemMode OBJECT-TYPE + SYNTAX TvStandard + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object gives you the possibility of switching the TV standard + of a whole system with NetCCU with only one command. + Not applicable for N+1 or NTx systems. + The value 'test' cannot be written." + ::= { commandsTxEntry 15 } + + + cmdTxProgramExciterPrio OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables/Disables priority usage of program exciter" + ::= { commandsTxEntry 20 } + + + cmdTxChangeOver OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Performs a change over" + ::= { commandsTxEntry 21 } + + + cmdTxSwitchPosition OBJECT-TYPE + SYNTAX INTEGER + { + undefined(1), + controlExcOnAmp(2), + programExcOnAmp(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows the actual switch position. + The program exciter is connected to input 1 (RF IN 1), + the control exciter is connected to input 2 (RF IN 2) of the base amplifier." + ::= { commandsTxEntry 22 } + + + cmdDeviceIdx OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This column is used to show parameters for both exiters, if you have + dualdrive transmitters." + ::= { commandsTxEntry 30 } + + + cmdExcOpModeInputAutomatic OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Activates/deactivates the input automatic. + If input automatic is active + and a loss of input signal is detected on the current input + the reserve input will be used instead." + ::= { commandsTxEntry 31 } + + + cmdExcPreselectInput OBJECT-TYPE + SYNTAX INTEGER + { + input1(1), + input2(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the preselection of a transmitters input." + ::= { commandsTxEntry 32 } + + + cmdExcMode OBJECT-TYPE + SYNTAX INTEGER + { + dvbT(1), + dvbH(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Switch between DVB-T and DVB-H." + ::= { commandsTxEntry 33 } + + + cmdExcNetworkMode OBJECT-TYPE + SYNTAX INTEGER + { + mfn(1), + sfn(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Switch between Single Frequency Networks (SFN) and + Multiple Frequency Networks (MFN)." + ::= { commandsTxEntry 34 } + + + cmdExcTPSSource OBJECT-TYPE + SYNTAX INTEGER + { + manualPresets(1), + mip(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Transmitted TPS parameters can be adjusted manually inside + the transmitter or automatically via MIP from the SFN adaptor." + ::= { commandsTxEntry 35 } + + + cmdExcEnableCellID OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This enables the Cell ID insertion. + The length indicator will be adjusted." + ::= { commandsTxEntry 36 } + + + cmdExcTxAddress OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the unique address of the transmitter + to reference specific settings in the MIP." + ::= { commandsTxEntry 37 } + + + cmdExcTxAutomatic OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This enables Tx specific parameters from the + MIP data caroussel (e.g. time offset, frequency offset)." + ::= { commandsTxEntry 38 } + + + cmdExcInputAutoSwitch OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Activates/deactivates the input automatic. + If input automatic is active + and a loss of input signal is detected on the current input + the reserve input will be used instead. + + This object is deprecated. It's recommended to use cmdExcOpModeInputAutomatic instead." + ::= { commandsTxEntry 39 } + + + cmdExcInputSeamless OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If the datastreams on both inputs are syncronised a seamless switch is possible. + With this parameter the seamless switch can be suppressed to enable a check of the input automatic." + ::= { commandsTxEntry 40 } + + + cmdExcInputPriority OBJECT-TYPE + SYNTAX INTEGER + { + equal(1), + prior(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Equal: There are no differences between both inputs. + If a failure on the current input is detected it will be switched to the reserve input. + It stays there until the reserve shows a failure. + Prior: Whenever possible a certain input shall be used. + If a failure is detected the reserve will be used as short as possible." + ::= { commandsTxEntry 41 } + + + cmdExcInputCheckTimeForward OBJECT-TYPE + SYNTAX Integer32 (0..600) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This time has to elapse before the current input switches + to the reserve input." + ::= { commandsTxEntry 42 } + + + cmdExcInputCheckTimeSwitchback OBJECT-TYPE + SYNTAX Integer32 (0..600) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This time has to elapse before the automatic switches back + from the reserve to a preselected input. + This value has no effect if the priority is set to equal." + ::= { commandsTxEntry 43 } + + + cmdExcInputMuteOnFail OBJECT-TYPE + SYNTAX INTEGER + { + mute(1), + noMute(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If a loss of input signal is detected, the exciter mutes." + ::= { commandsTxEntry 44 } + + + cmdExcInputManualPreseletionHP1 OBJECT-TYPE + SYNTAX INTEGER + { + auto(1), + asi(2), + smpte(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The data format of the input can be detected + automatically or can be set manually to ASI or SMPTE." + ::= { commandsTxEntry 45 } + + + cmdExcInputManualPreseletionHP2 OBJECT-TYPE + SYNTAX INTEGER + { + auto(1), + asi(2), + smpte(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The data format of the input can be detected + automatically or can be set manually to ASI or SMPTE." + ::= { commandsTxEntry 46 } + + + cmdExcInputManualPreseletionLP1 OBJECT-TYPE + SYNTAX INTEGER + { + auto(1), + asi(2), + smpte(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The data format of the input can be detected + automatically or can be set manually to ASI or SMPTE." + ::= { commandsTxEntry 47 } + + + cmdExcInputManualPreseletionLP2 OBJECT-TYPE + SYNTAX INTEGER + { + auto(1), + asi(2), + smpte(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The data format of the input can be detected + automatically or can be set manually to ASI or SMPTE." + ::= { commandsTxEntry 48 } + + + cmdExcTPSManualBandwidth OBJECT-TYPE + SYNTAX INTEGER + { + mhz5(1), + mhz6(2), + mhz7(3), + mhz8(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The bandwidth used by the RF channel." + ::= { commandsTxEntry 49 } + + + cmdExcTPSManualFFTLength OBJECT-TYPE + SYNTAX INTEGER + { + k2(1), + k8(2), + k4(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The used FFT length (depends on the DVB network)." + ::= { commandsTxEntry 50 } + + + cmdExcTPSManualGuardInterval OBJECT-TYPE + SYNTAX INTEGER + { + oneOf32(1), + oneOf16(2), + oneOf8(3), + oneOf4(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Guard interval affects the error correction in multipath receiving situations. + A long Guard Interval reduces the amount of payload data." + ::= { commandsTxEntry 51 } + + + cmdExcTPSManualConstellation OBJECT-TYPE + SYNTAX INTEGER + { + qpsk(1), + qam16(2), + qam64(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter sets the modulation mode." + ::= { commandsTxEntry 52 } + + + cmdExcTPSManualAlpha OBJECT-TYPE + SYNTAX INTEGER + { + noHierarchy(1), + one(2), + two(3), + four(4) + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "An alpha greater than noHierarchy(1) enables the hierarchical coding mode." + ::= { commandsTxEntry 53 } + + + cmdExcTPSManualCellID OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Via Cell ID the receiver knows the current network." + ::= { commandsTxEntry 54 } + + + cmdExcTPSManualInterleaver OBJECT-TYPE + SYNTAX INTEGER + { + indepth(1), + nat(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables the bit interleaver for hierarchical coding" + ::= { commandsTxEntry 55 } + + + cmdExcTPSManualCoderateHP OBJECT-TYPE + SYNTAX INTEGER + { + oneOf2(1), + twoOf3(2), + threeOf4(3), + fiveOf6(4), + sevenOf8(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Code Rate sets the ratio between payload and error correction information." + ::= { commandsTxEntry 56 } + + + cmdExcTPSManualCoderateLP OBJECT-TYPE + SYNTAX INTEGER + { + oneOf2(1), + twoOf3(2), + threeOf4(3), + fiveOf6(4), + sevenOf8(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Code Rate sets the ratio between payload and error correction information." + ::= { commandsTxEntry 57 } + + + cmdExcTPSManualTimeSlicingHP OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables the time slicing for hierarchical coding." + ::= { commandsTxEntry 58 } + + + cmdExcTPSManualTimeSlicingLP OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables the time slicing for hierarchical coding." + ::= { commandsTxEntry 59 } + + + cmdExcTPSManualFECHP OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables the forward error correction (FEC) for hierarchical coding." + ::= { commandsTxEntry 60 } + + + cmdExcTPSManualFECLP OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables the forward error correction (FEC) for hierarchical coding." + ::= { commandsTxEntry 61 } + + + cmdExcSFNStaticDelay OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Microseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A constant adjustable delay for tuning a SFN (-999999.9 ... 999999.9)." + ::= { commandsTxEntry 62 } + + + cmdExcSFNDeviationTime OBJECT-TYPE + SYNTAX Integer32 (1..100) + UNITS "Microseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Leap In Time. + This parameter sets the deviation in time when a readjustment + of the dynamic delay is necessary." + ::= { commandsTxEntry 63 } + + + cmdExcFrequency OBJECT-TYPE + SYNTAX Integer32 (47000000..1500000000) + UNITS "Hertz" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the RF frequency." + ::= { commandsTxEntry 64 } + + + cmdExcReferenceSource OBJECT-TYPE + SYNTAX INTEGER + { + intern(1), + extern5Mhz(2), + extern10Mhz(3), + extern1PPS(4), + internGPS(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Source of the reference signal. + The value internGPS is not valid for SX800." + ::= { commandsTxEntry 65 } + + + cmdExcMuteOnPPSFail OBJECT-TYPE + SYNTAX INTEGER + { + off(1), + onlyAtStartup(2), + afterFailDelayTime(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the behaviour if the external second pulse is not available." + ::= { commandsTxEntry 66 } + + + cmdExcMuteOnReferenceFail OBJECT-TYPE + SYNTAX INTEGER + { + off(1), + onlyAtStartup(2), + afterFailDelayTime(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the behaviour if the external reference is not available." + ::= { commandsTxEntry 67 } + + + cmdExcRefFailDelayTime OBJECT-TYPE + SYNTAX Integer32 (0..24) + UNITS "Hours" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the time after the RF will be muted in case of a reference problem. + Zero hours means react immediately." + ::= { commandsTxEntry 68 } + + + cmdExcTypeLossOfInput OBJECT-TYPE + SYNTAX INTEGER + { + warning(1), + fault(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If the input signal is lost, either a warning or a fault can be generated. + If you select fault here, a switchover to the reserve exciter will be executed + when input signal is lost." + ::= { commandsTxEntry 69 } + + + cmdExcRfOutput OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Turns on/switches off the output signal. This switch takes the same effect as the switch on the frontpanel of the exciter." + ::= { commandsTxEntry 70 } + + + cmdExcRfOutputRegulation OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Turns on/switches off the automatic output level regulation." + ::= { commandsTxEntry 71 } + + + cmdExcRfOutputManualRfLevel OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the RF level (0.0 ... 100.0). The value relates to an attenuation of 0 dB." + ::= { commandsTxEntry 72 } + + + cmdExcRfOutputAttenuation OBJECT-TYPE + SYNTAX Integer32 (0..9) + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Activates internal attenuators to reduce the output level of the exciter. + Adjustable in steps of 3 dB only." + ::= { commandsTxEntry 73 } + + + cmdExcRfOutputRfSlope OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts a slope in the RF signal (-50.0 ... 50.0)." + ::= { commandsTxEntry 74 } + + + cmdExcRfOutputModulationSlope OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Modulation slope (-50.0 ... 50.0)." + ::= { commandsTxEntry 75 } + + + cmdExcRfIqAdjustStart OBJECT-TYPE + SYNTAX INTEGER + { + break(1), + start(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Starts the automatic IQ adjustment. It works for the current used local 1 frequency and lasts up to 5 minutes. In this time the output will be muted. During the adjustment no transmitter parameter shall be changed. Break will stop the automatic immediately. The IQ modulator looses its adjustment! + Read values mean idle(1) and started(2)." + ::= { commandsTxEntry 77 } + + + cmdExcRfIqAdjustTestsignal OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Generates a test signal to adjust the IQ modulation. It is necessary to disconnect the rf-cable to the output stages." + ::= { commandsTxEntry 78 } + + + cmdExcRfIqAdjustBiasCoarseI OBJECT-TYPE + SYNTAX Integer32 (-1023..1023) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the offset for I in huge steps." + ::= { commandsTxEntry 79 } + + + cmdExcRfIqAdjustBiasCoarseQ OBJECT-TYPE + SYNTAX Integer32 (-1023..1023) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the offset for Q in huge steps." + ::= { commandsTxEntry 80 } + + + cmdExcRfIqAdjustBiasFineI OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the offset for I in small steps." + ::= { commandsTxEntry 81 } + + + cmdExcRfIqAdjustBiasFineQ OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the offset for Q in small steps." + ::= { commandsTxEntry 82 } + + + cmdExcRfIqAdjustGainI OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the gain for I in small steps." + ::= { commandsTxEntry 83 } + + + cmdExcRfIqAdjustGainQ OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the gain for Q in small steps." + ::= { commandsTxEntry 84 } + + + cmdExcRfIqAdjustPhase OBJECT-TYPE + SYNTAX FloatingPoint + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the phase between I and Q (-14.000 ... 14.000)." + ::= { commandsTxEntry 85 } + + + cmdExcInput1Source OBJECT-TYPE + SYNTAX InputSource + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Source for input 1." + ::= { commandsTxEntry 86 } + + + cmdExcInput2Source OBJECT-TYPE + SYNTAX InputSource + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Source for input 2." + ::= { commandsTxEntry 87 } + + + cmdExcInpAutoReadyAfterChangeOv OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Input automatic ready after change over." + ::= { commandsTxEntry 88 } + + + cmdExcInputFailDelayTime OBJECT-TYPE + SYNTAX Integer32 (0..600) + UNITS "Seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The time between detecting a loss of input signal and displaying a failure." + ::= { commandsTxEntry 89 } + + + cmdExcTransmitterType OBJECT-TYPE + SYNTAX INTEGER + { + atv(1), + dvb(2), + atsc(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "the TV standard of the transmitter + The transmitter is rebooted automatically when the TV standard is + changed. Signal processing is also switched over." + ::= { commandsTxEntry 90 } + + + cmdExcTimeScheduler OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If on, the time scheduler controls the tx type. When switching on the scheduler + it may instantly set the correct TV standard and reboot the device." + ::= { commandsTxEntry 91 } + + + cmdExcMuteCondition OBJECT-TYPE + SYNTAX INTEGER + { + onAllFaults(1), + notBeforeSyncLoss(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When notBeforeSyncLoss(2) is selected, + it relativizes the cmdExcInputMuteOnFail setting mute(1): + If a DVB receiver is the last valid input, an existing transport stream, + even if it is faulty shall not be muted. + + Only for SLx/Sx801" + ::= { commandsTxEntry 92 } + + + cmdExcRfWarningLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Warning limit for the RF control. + min: -15.0, max: 0.0" + ::= { commandsTxEntry 97 } + + + cmdExcRfFailLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Fault limit for the RF control. + min: -15.0, max: 0.0" + ::= { commandsTxEntry 98 } + + + cmdExcOutputPower OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "W" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "amplifier output power + 0 ... 400 W" + ::= { commandsTxEntry 99 } + + + cmdOstRefVoltageVision OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This adjusts the output power of the amplifier. + This value is settable with maximal 1 position after point (example 11.2)." + ::= { commandsTxEntry 100 } + + + cmdOstMaxOutletTempThreshold OBJECT-TYPE + SYNTAX Integer32 (45..65) + UNITS "Degree Celsius" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the threshold for the outlet temperature." + ::= { commandsTxEntry 101 } + + + cmdExcMonitoringOutput OBJECT-TYPE + SYNTAX INTEGER + { + off(1), + reference10MHz(2), + generated1PPS(3), + kHz1(4), + pulse1PPS(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects which signal appears at the monitoring output." + ::= { commandsTxEntry 110 } + + + cmdExcOcxoAdjust OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Adjusts the frequency of the internal 10 MHz reference. + This value only takes effect if the reference source 'internal' is selected." + ::= { commandsTxEntry 111 } + + + cmdExcExpectInputReserve OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If on(1) the warning txExcInputReseveMissing will be generated + in case second input is missing." + ::= { commandsTxEntry 112 } + + + cmdExcEnablePcrReset OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Enables/disables daily PCR resets. + This option is valid only in MFN operation. + The reset time is given in cmdExcTimeForDailyPcrReset." + ::= { commandsTxEntry 113 } + + + cmdExcTimeForDailyPcrReset OBJECT-TYPE + SYNTAX TimeOfDay + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Sets the time of day for daily PCR reset." + ::= { commandsTxEntry 114 } + + + cmdExcFailDelayMode OBJECT-TYPE + SYNTAX FailDelayMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Condition when the fail delay time is used." + ::= { commandsTxEntry 115 } + + + summaryInfo OBJECT IDENTIFIER ::= { rsXx8000DvbTxObjs 2 } + + + summaryFaultTx OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates a summary fault of the transmitter. + true(1) --> summary fault + false(2) --> no summary fault + + There is a fault of at least one module (e.g. Exciter) which causes this summary fault. + + An equivalent would be the LED Fault at the transmitters frontpanel." + ::= { summaryInfo 1 } + + + summaryWarningTx OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates a summary warning of the transmitter. + true(1) --> summary warning + false(2) --> no summary warning + + There is a fault of at least one module (e.g. Exciter) which causes this summary warning. + + An equivalent would be the LED Warning at the transmitters frontpanel." + ::= { summaryInfo 2 } + + + localModeTx OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates the local/remote-mode of the transmitter. + true(1) --> local + false(2) --> remote + + The transmitter is eigther in local-mode or in remote-mode. + For security reasons it is not possible to set this value! + + An equivalent would the LED Local at the transmitters frontpanel." + ::= { summaryInfo 3 } + + + rfOnTx OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The RF is present for the corresponding transmitter." + ::= { summaryInfo 4 } + + + forwardPower OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The measured forwarded power [W] of the transmitter. + For Active Reserve systems it is the sum of both outputstages." + ::= { summaryInfo 5 } + + + reflectedPower OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The measured reflected power [W] of the transmitter. + For Active Reserve systems it is the sum of both outputstages. + + Not available for lowpower systems." + ::= { summaryInfo 6 } + + + summaryFaultExcA OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates a summary fault of exciter." + ::= { summaryInfo 7 } + + + summaryFaultOstA OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates a summary fault of outputstage." + ::= { summaryInfo 8 } + + + summaryFaultExcB OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates a summary fault of exciter." + ::= { summaryInfo 9 } + + + summaryFaultOstB OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates a summary fault of outputstage." + ::= { summaryInfo 10 } + + + exciterAutomaticReady OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Exciter Automatic is Ready. + In case of any fault on one exciter, there will be a switchover to the other exciter." + ::= { summaryInfo 11 } + + + exciterAutomaticChanged OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Exciter Automatic has changed. + There was a fault on one exciter which lead to this changeover." + ::= { summaryInfo 12 } + + + exciterAutomaticFault OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Exciter Automatic is faulty. + In case of any fault on one exciter, there will be no switchover to the other exciter, + because of this fault." + ::= { summaryInfo 13 } + + + outputstageAutomaticReady OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Outputstage Automatic is Ready. + In case of any fault on one outputstage, there will be a switchover to the other outputstage. + + This paramter is only available for systems with an automatic output switch." + ::= { summaryInfo 14 } + + + outputstageAutomaticChanged OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Outputstage Automatic has changed. + There was a fault on one outputstage which lead to this changeover. + + This paramter is only available for systems with an automatic output switch." + ::= { summaryInfo 15 } + + + outputstageAutomaticFault OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Outputstage Automatic is faulty. + In case of any fault on one outputstage, there will be no switchover to the other outputstage, + because of this fault. + + This paramter is only available for systems with an automatic output switch." + ::= { summaryInfo 16 } + + + noConnectionExcA OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "No Connection between NetCCU and Exciter." + ::= { summaryInfo 17 } + + + noConnectionOstA OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "No Connection between NetCCU and Outputstage." + ::= { summaryInfo 18 } + + + noConnectionExcB OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "No Connection between NetCCU and Exciter." + ::= { summaryInfo 19 } + + + noConnectionOstB OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "No Connection between NetCCU and Outputstage." + ::= { summaryInfo 20 } + + + activeExcA OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ExciterA is currently active." + ::= { summaryInfo 21 } + + + activeOstA OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "OutputstageA is currently active." + ::= { summaryInfo 22 } + + + activeExcB OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "ExciterB is currently active." + ::= { summaryInfo 23 } + + + activeOstB OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "OutputstageB is currently active." + ::= { summaryInfo 24 } + + + forwardPowerOstA OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The measured forwarded power [W] of the OutputstageA." + ::= { summaryInfo 25 } + + + reflectedPowerOstA OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The measured reflected power [W] of the OutputstageA. + + Not available for lowpower systems." + ::= { summaryInfo 26 } + + + forwardPowerOstB OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The measured forwarded power [W] of the OutputstageB." + ::= { summaryInfo 27 } + + + reflectedPowerOstB OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The measured reflected power [W] of the OutputstageB. + + Not available for lowpower systems." + ::= { summaryInfo 28 } + + + powerSupply OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Monitoring value of the output voltages of the power supply." + ::= { summaryInfo 29 } + + + additionalPowerSupply OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows whether the NetCCU has an additional (external) power supply." + ::= { summaryInfo 30 } + + + internalPowerSupply OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Monitoring value of the output voltages of the internal power supply." + ::= { summaryInfo 31 } + + + externalPowerSupply OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Monitoring value of the output voltages of the external power supply." + ::= { summaryInfo 32 } + + + detailedInfo OBJECT IDENTIFIER ::= { rsXx8000DvbTxObjs 3 } + + + excInputTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExcInputEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for more detailed information about the exciter. + These values are all read-only. For settings, refer to commands." + ::= { detailedInfo 2 } + + + excInputEntry OBJECT-TYPE + SYNTAX ExcInputEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for a designated input channel." + INDEX { excInputExcIdx, excInputChannelIdx } + ::= { excInputTable 1 } + + + ExcInputEntry ::= + SEQUENCE { + excInputExcIdx + IndexAB, + excInputChannelIdx + Integer32, + excInputChannelName + INTEGER, + excInputConnected + TruthValue, + excInputSeamless + TruthValue, + excInputPreselected + TruthValue, + excInputActive + TruthValue, + excInputMipFail + TruthValue, + excInputBandwidth + INTEGER, + excInputFFTLength + INTEGER, + excInputGuardInterval + INTEGER, + excInputConstellation + INTEGER, + excInputAlpha + INTEGER, + excInputCellID + Integer32, + excInputInterleaver + INTEGER, + excInputCodeRate + INTEGER, + excInputPacketLength + Integer32, + excInputMeasuredDatarate + Integer32, + excInputRequiredDatarate + Integer32, + excInputMaximumDelay + Integer32 + } + + excInputExcIdx OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index for exciterA (and exciterB if there are DualDrive systems)." + ::= { excInputEntry 1 } + + + excInputChannelIdx OBJECT-TYPE + SYNTAX Integer32 (1..6) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index for the different input channels." + ::= { excInputEntry 2 } + + + excInputChannelName OBJECT-TYPE + SYNTAX INTEGER + { + hp1(1), + hp2(2), + lp1(3), + lp2(4), + activeHP(5), + activeLP(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the logical name for the index for the different input channels." + ::= { excInputEntry 3 } + + + excInputConnected OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The input channel is connected." + ::= { excInputEntry 4 } + + + excInputSeamless OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The input channel is in seamless mode." + ::= { excInputEntry 5 } + + + excInputPreselected OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The input channel is the preselected." + ::= { excInputEntry 6 } + + + excInputActive OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The input channel is active." + ::= { excInputEntry 7 } + + + excInputMipFail OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Input channel MIP fail." + ::= { excInputEntry 8 } + + + excInputBandwidth OBJECT-TYPE + SYNTAX INTEGER + { + mhz5(1), + mhz6(2), + mhz7(3), + mhz8(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The bandwidth used by the input channel." + ::= { excInputEntry 9 } + + + excInputFFTLength OBJECT-TYPE + SYNTAX INTEGER + { + k2(1), + k8(2), + k4(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The used FFT length (depends on the DVB network)." + ::= { excInputEntry 10 } + + + excInputGuardInterval OBJECT-TYPE + SYNTAX INTEGER + { + oneOf32(1), + oneOf16(2), + oneOf8(3), + oneOf4(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Guard interval affects the error correction in multipath receiving situations. + A long Guard Interval reduces the amount of payload data." + ::= { excInputEntry 11 } + + + excInputConstellation OBJECT-TYPE + SYNTAX INTEGER + { + qpsk(1), + qam16(2), + qam64(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This parameter sets the modulation mode." + ::= { excInputEntry 12 } + + + excInputAlpha OBJECT-TYPE + SYNTAX INTEGER + { + noHierarchy(1), + one(2), + two(3), + four(4) + } + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "An alpha greater than zero enables the hierarchical coding mode." + ::= { excInputEntry 13 } + + + excInputCellID OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Via Cell ID the receiver knows the current network." + ::= { excInputEntry 14 } + + + excInputInterleaver OBJECT-TYPE + SYNTAX INTEGER + { + indepth(1), + nat(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Enables the bit interleaver for hierarchical coding" + ::= { excInputEntry 15 } + + + excInputCodeRate OBJECT-TYPE + SYNTAX INTEGER + { + oneOf2(1), + twoOf3(2), + threeOf4(3), + fiveOf6(4), + sevenOf8(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Coderate can be set separately for HP and LP channel." + ::= { excInputEntry 16 } + + + excInputPacketLength OBJECT-TYPE + SYNTAX Integer32 (188..208) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Packet length for the channel." + ::= { excInputEntry 17 } + + + excInputMeasuredDatarate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The measured datarate of the input." + ::= { excInputEntry 18 } + + + excInputRequiredDatarate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The required datarate of the input." + ::= { excInputEntry 19 } + + + excInputMaximumDelay OBJECT-TYPE + SYNTAX Integer32 (0..100000000) + UNITS "Nanoseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Period of time between the signal leaving the play-out center (MIP inserter) + and its regular transmission at the antenna. + This delay is set in the MIP inserter and serves as a basis + for all the transmitters in the SFN." + ::= { excInputEntry 20 } + + + ostTable OBJECT-TYPE + SYNTAX SEQUENCE OF OstEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of racks." + ::= { detailedInfo 3 } + + + ostEntry OBJECT-TYPE + SYNTAX OstEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row (an entry) for one rack." + INDEX { ostIdx, ostRackIdx, ostRackAmpIdx } + ::= { ostTable 1 } + + + OstEntry ::= + SEQUENCE { + ostIdx + IndexAB, + ostRackIdx + IndexRack, + ostRackInletTemperature + FloatingPoint, + ostRackOutletTemperature + FloatingPoint, + ostRackAuxPowerSupply + FloatingPoint, + ostRackAmpIdx + IndexAmplifier, + ostRackAmpI1A + FloatingPoint, + ostRackAmpI2A + FloatingPoint, + ostRackAmpI3A + FloatingPoint, + ostRackAmpI4A + FloatingPoint, + ostRackAmpI1B + FloatingPoint, + ostRackAmpI2B + FloatingPoint, + ostRackAmpI3B + FloatingPoint, + ostRackAmpI4B + FloatingPoint, + ostRackAmpIDrv + FloatingPoint, + ostRackAmpUDc + FloatingPoint, + ostRackAmpIDc + FloatingPoint, + ostRackAmpUDcControl + FloatingPoint, + ostRackAmpUReg + FloatingPoint, + ostRackAmpPowerA + FloatingPoint, + ostRackAmpPowerB + FloatingPoint, + ostRackAmpPowerOut + FloatingPoint, + ostRackAmpPowerReflection + FloatingPoint, + ostRackAmpPowerReference + FloatingPoint, + ostRackAmpDeltaPhase + FloatingPoint, + ostRackAmpCmdDeltaPhase + FloatingPoint + } + + ostIdx OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The dedicated outputstage (A/B)." + ::= { ostEntry 1 } + + + ostRackIdx OBJECT-TYPE + SYNTAX IndexRack + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The rack number (1..10)." + ::= { ostEntry 2 } + + + ostRackInletTemperature OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Degree Celsius" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The inlet temperature." + ::= { ostEntry 3 } + + + ostRackOutletTemperature OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Degree Celsius" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The outlet temperature." + ::= { ostEntry 4 } + + + ostRackAuxPowerSupply OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Control voltage of auxiliary power supply of the designated rack. + The value should be between 11.1 to 13.2 V." + ::= { ostEntry 5 } + + + ostRackAmpIdx OBJECT-TYPE + SYNTAX IndexAmplifier + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Amplifier Index" + ::= { ostEntry 400 } + + + ostRackAmpI1A OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier module current (I_1A)." + ::= { ostEntry 401 } + + + ostRackAmpI2A OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier module current (I_2A)." + ::= { ostEntry 402 } + + + ostRackAmpI3A OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier module current (I_3A)." + ::= { ostEntry 403 } + + + ostRackAmpI4A OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier module current (I_4A)." + ::= { ostEntry 404 } + + + ostRackAmpI1B OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier module current (I_1B)." + ::= { ostEntry 405 } + + + ostRackAmpI2B OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier module current (I_2B)." + ::= { ostEntry 406 } + + + ostRackAmpI3B OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier module current (I_3B)." + ::= { ostEntry 407 } + + + ostRackAmpI4B OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier module current (I_4B)." + ::= { ostEntry 408 } + + + ostRackAmpIDrv OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The driver module current (I_DRV)." + ::= { ostEntry 409 } + + + ostRackAmpUDc OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier supply voltage." + ::= { ostEntry 410 } + + + ostRackAmpIDc OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier supply current." + ::= { ostEntry 411 } + + + ostRackAmpUDcControl OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power supply control voltage." + ::= { ostEntry 412 } + + + ostRackAmpUReg OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power amplifier AGC voltage." + ::= { ostEntry 413 } + + + ostRackAmpPowerA OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The voltage power detector A." + ::= { ostEntry 414 } + + + ostRackAmpPowerB OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The voltage power detector B." + ::= { ostEntry 415 } + + + ostRackAmpPowerOut OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The voltage forward power detector." + ::= { ostEntry 416 } + + + ostRackAmpPowerReflection OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The voltage reflected power detector." + ::= { ostEntry 417 } + + + ostRackAmpPowerReference OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The reference voltage for output power." + ::= { ostEntry 418 } + + + ostRackAmpDeltaPhase OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The measured phase delta for output power." + ::= { ostEntry 419 } + + + ostRackAmpCmdDeltaPhase OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The phase delta setting for output power. + The range is -50.0% to 50.0%." + ::= { ostEntry 420 } + + + exciterStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExciterStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Exciter status values." + ::= { detailedInfo 20 } + + + exciterStatusEntry OBJECT-TYPE + SYNTAX ExciterStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row (an entry) for one exciter." + INDEX { excStatusExcIdx } + ::= { exciterStatusTable 1 } + + + ExciterStatusEntry ::= + SEQUENCE { + excStatusExcIdx + IndexAB, + excStatusRfOutputAgcRegulation + FloatingPoint, + excStatusRfIqAdjustAuto + INTEGER, + excStatusRfIqAdjustLO1Frequency + FloatingPoint, + excStatusNominalPower + Integer32, + excStatusVSWR + FloatingPoint, + excStatusSfnDelayProcessing + FloatingPoint, + excStatusSfnDelayDynamic + FloatingPoint, + excStatusSfnDelayNetwork + FloatingPoint, + excStatusSfnDelayTxOffset + FloatingPoint, + excStatusSfnDelayMaximum + FloatingPoint, + excStatusSfnDelayTotal + FloatingPoint, + excStatusAmplifierControl + INTEGER, + excStatusReqDataRateHP + Integer32, + excStatusReqDataRateLP + Integer32, + excStatusFailDelay + FailDelayStatus + } + + excStatusExcIdx OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The dedicated exciter (A/B)." + ::= { exciterStatusEntry 3 } + + + excStatusRfOutputAgcRegulation OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows the operating point of the RF regulator. The shown value should be around 50 per cent." + ::= { exciterStatusEntry 4 } + + + excStatusRfIqAdjustAuto OBJECT-TYPE + SYNTAX INTEGER + { + notAdjusted(1), + inProgress(2), + adjusted(3) + } + UNITS "Percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Automatic I/Q-Adjust." + ::= { exciterStatusEntry 5 } + + + excStatusRfIqAdjustLO1Frequency OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "MHz" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Modulator LO1." + ::= { exciterStatusEntry 6 } + + + excStatusNominalPower OBJECT-TYPE + SYNTAX Integer32 + UNITS "W" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Description." + ::= { exciterStatusEntry 7 } + + + excStatusVSWR OBJECT-TYPE + SYNTAX FloatingPoint + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Voltage Standing Wave Ratio" + ::= { exciterStatusEntry 9 } + + + excStatusSfnDelayProcessing OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Minimum signal transmit time through the exciter. + This delay depends on the DVB transmission parameters." + ::= { exciterStatusEntry 13 } + + + excStatusSfnDelayDynamic OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The period of time by which signal processing is artificially delayed + so that the desired time of transmission is obtained." + ::= { exciterStatusEntry 14 } + + + excStatusSfnDelayNetwork OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The signal propagation time between the play-out center + (MIP inserter) and the exciter input. This delay depends + on the transmission path used." + ::= { exciterStatusEntry 15 } + + + excStatusSfnDelayTxOffset OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An individual transmitter specific delay. It can be adjusted + via data carousel of the SFN adapter. It is true for a + specific transmitter address." + ::= { exciterStatusEntry 16 } + + + excStatusSfnDelayMaximum OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The period of time between the signal leaving the play-out center + (MIP inserter) and its regular transmission at the antenna. + This delay is set in the MIP inserter and serves as a basis for + all the transmitters in the SFN." + ::= { exciterStatusEntry 17 } + + + excStatusSfnDelayTotal OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Microseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The actual signal transit time through the exciter. + This is derived from the sum of static-, dynamic-, + offset- and processing delay." + ::= { exciterStatusEntry 18 } + + + excStatusAmplifierControl OBJECT-TYPE + SYNTAX INTEGER + { + on(1), + off(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Amplifier control status" + ::= { exciterStatusEntry 20 } + + + excStatusReqDataRateHP OBJECT-TYPE + SYNTAX Integer32 + UNITS "bit per seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Required data rate on HP input + with respect to the current TPS settings." + ::= { exciterStatusEntry 30 } + + + excStatusReqDataRateLP OBJECT-TYPE + SYNTAX Integer32 + UNITS "bit per seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Required data rate on LP input + with respect to the current TPS settings." + ::= { exciterStatusEntry 31 } + + + excStatusFailDelay OBJECT-TYPE + SYNTAX FailDelayStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows whether the fail delay time is qualified." + ::= { exciterStatusEntry 40 } + + + exciterPrecorrectionTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExciterPrecorrectionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Exciter status values." + ::= { detailedInfo 21 } + + + exciterPrecorrectionEntry OBJECT-TYPE + SYNTAX ExciterPrecorrectionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row (an entry) for one exciter." + INDEX { excPrecExcIdx } + ::= { exciterPrecorrectionTable 1 } + + + ExciterPrecorrectionEntry ::= + SEQUENCE { + excPrecExcIdx + IndexAB, + excPrecLinCorrection + SwitchOnOff, + excPrecLinAutomaticADE + INTEGER, + excPrecLinMaxAmplitudeRipple + FloatingPoint, + excPrecLinMaxGroupDelayRipple + Integer32, + excPrecLinAmplitudeRipple + FloatingPoint, + excPrecLinGroupDelayRipple + Integer32, + excPrecLinInputLevel + INTEGER, + excPrecLinAutomatic + INTEGER, + excPrecNonlinCorrection + SwitchOnOff, + excPrecNonlinAutomaticADE + INTEGER, + excPrecNonlinThresholdShoulders + FloatingPoint, + excPrecNonlinShoulderLeft + FloatingPoint, + excPrecNonlinShoulderRight + FloatingPoint, + excPrecNonlinInputLevel + INTEGER, + excPrecNonlinAutomatic + INTEGER, + excPrecUserState + EqualizerCalibrationState, + excPrecFactoryState + EqualizerCalibrationState, + excPrecRestoreCurrentSettings + INTEGER, + excPrecRestoreAllSettings + INTEGER + } + + excPrecExcIdx OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The dedicated exciter (A/B)." + ::= { exciterPrecorrectionEntry 3 } + + + excPrecLinCorrection OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Switches on/turns off the linear precorrector." + ::= { exciterPrecorrectionEntry 4 } + + + excPrecLinAutomaticADE OBJECT-TYPE + SYNTAX INTEGER + { + manual(1), + automatic(2), + adaptive(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables /disables the automatic precorrector. To get the ADE in work linear precorrection has to be switched on." + ::= { exciterPrecorrectionEntry 5 } + + + excPrecLinMaxAmplitudeRipple OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets te maximum ripple for automatic amplitude correction (0.0 ... 2.0)." + ::= { exciterPrecorrectionEntry 6 } + + + excPrecLinMaxGroupDelayRipple OBJECT-TYPE + SYNTAX Integer32 (0..500) + UNITS "Nanoseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the maximum ripple for automatic group delay correction." + ::= { exciterPrecorrectionEntry 7 } + + + excPrecLinAmplitudeRipple OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows the current amplitude ripple." + ::= { exciterPrecorrectionEntry 8 } + + + excPrecLinGroupDelayRipple OBJECT-TYPE + SYNTAX Integer32 + UNITS "Nanoseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows the current group delay ripple." + ::= { exciterPrecorrectionEntry 9 } + + + excPrecLinInputLevel OBJECT-TYPE + SYNTAX INTEGER + { + tooHigh(1), + ok(2), + tooLow(3), + failure(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows the state of the feedback signal from the measurement point between output stage and antenna." + ::= { exciterPrecorrectionEntry 10 } + + + excPrecLinAutomatic OBJECT-TYPE + SYNTAX INTEGER + { + disabled(1), + active(2), + calculate(3), + measure(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows if the automatic precorrector works properly." + ::= { exciterPrecorrectionEntry 11 } + + + excPrecNonlinCorrection OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Switches on/turns off the nonlinear precorrector." + ::= { exciterPrecorrectionEntry 12 } + + + excPrecNonlinAutomaticADE OBJECT-TYPE + SYNTAX INTEGER + { + manual(1), + automatic(2), + adaptive(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables /disables the automatic precorrector. To get the ADE in work nonlinear precorrection has to be switched on." + ::= { exciterPrecorrectionEntry 13 } + + + excPrecNonlinThresholdShoulders OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The target shoulder distance for ADE (0.0 ... 40.0)." + ::= { exciterPrecorrectionEntry 14 } + + + excPrecNonlinShoulderLeft OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the current measurement for the left handed shoulder distance." + ::= { exciterPrecorrectionEntry 15 } + + + excPrecNonlinShoulderRight OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the current measurement of the right handed shoulder." + ::= { exciterPrecorrectionEntry 16 } + + + excPrecNonlinInputLevel OBJECT-TYPE + SYNTAX INTEGER + { + tooHigh(1), + ok(2), + tooLow(3), + failure(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows the state of the feedback signal from the measurement point between output stage and antenna." + ::= { exciterPrecorrectionEntry 17 } + + + excPrecNonlinAutomatic OBJECT-TYPE + SYNTAX INTEGER + { + disabled(1), + active(2), + calculate(3), + measure(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows if the automatic precorrector works properly." + ::= { exciterPrecorrectionEntry 18 } + + + excPrecUserState OBJECT-TYPE + SYNTAX EqualizerCalibrationState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "status of the user precorrection settings" + ::= { exciterPrecorrectionEntry 100 } + + + excPrecFactoryState OBJECT-TYPE + SYNTAX EqualizerCalibrationState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "status of the factory precorrection settings" + ::= { exciterPrecorrectionEntry 101 } + + + excPrecRestoreCurrentSettings OBJECT-TYPE + SYNTAX INTEGER + { + stop(1), + start(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "restores current factory precorrection setting" + ::= { exciterPrecorrectionEntry 102 } + + + excPrecRestoreAllSettings OBJECT-TYPE + SYNTAX INTEGER + { + stop(1), + start(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "restores all factory precorrection settings" + ::= { exciterPrecorrectionEntry 103 } + + + configurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF ConfigurationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table for Type Configuration parameters." + ::= { detailedInfo 30 } + + + configurationEntry OBJECT-TYPE + SYNTAX ConfigurationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for the Type Configuration parameters." + INDEX { configTvStandardIdx } + ::= { configurationTable 1 } + + + ConfigurationEntry ::= + SEQUENCE { + configTvStandardIdx + TvStandard, + configTvStandardName + TvStandard, + configRxFrequency + Integer32, + configFrequency + Integer32, + configPower + FloatingPoint, + configInputSource + InputSource + } + + configTvStandardIdx OBJECT-TYPE + SYNTAX TvStandard + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index for the TV standard." + ::= { configurationEntry 3 } + + + configTvStandardName OBJECT-TYPE + SYNTAX TvStandard + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the TV standard as a text." + ::= { configurationEntry 5 } + + + configRxFrequency OBJECT-TYPE + SYNTAX Integer32 (160000000..910000000) + UNITS "Hz" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The input frequency for input 1." + ::= { configurationEntry 6 } + + + configFrequency OBJECT-TYPE + SYNTAX Integer32 (47000000..1500000000) + UNITS "Hz" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The output frequency for input 1." + ::= { configurationEntry 7 } + + + configPower OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "W" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The output power (0.0 ... 2500.0) for input 1." + ::= { configurationEntry 8 } + + + configInputSource OBJECT-TYPE + SYNTAX InputSource + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The source for input 1." + ::= { configurationEntry 9 } + + + timeSchedulerTable OBJECT-TYPE + SYNTAX SEQUENCE OF TimeSchedulerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table for Time Scheduler parameters." + ::= { detailedInfo 31 } + + + timeSchedulerEntry OBJECT-TYPE + SYNTAX TimeSchedulerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table for the Time Scheduler parameters. + + A row in this table is created by setting the value of schedulerRowStatus to + 'createAndGo' or 'createAndWait'. + + A row in this table is deleted by setting the value of schedulerRowStatus to + 'destroy'." + INDEX { schedulerDateTimeIdx } + ::= { timeSchedulerTable 1 } + + + TimeSchedulerEntry ::= + SEQUENCE { + schedulerDateTimeIdx + DateAndTime, + schedulerRowStatus + RowStatus, + schedulerEvent + INTEGER, + schedulerDateTime + DateAndTime, + schedulerTvStandard + TvStandard + } + + schedulerDateTimeIdx OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The DateAndTime index. + + Note: Deci-seconds different from 0 and UTC values are ignored. + The index is implemented as a Fixed length string of 8 components. The last + component (Deci-seconds) is always 0. + Example: + The DateTime of 2008-9-15,17:45:30.0 + has the index: 7.216.9.15.17.45.30.0 + " + ::= { timeSchedulerEntry 3 } + + + schedulerRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to create and delete rows in the timeSchedulerTable." + ::= { timeSchedulerEntry 5 } + + + schedulerEvent OBJECT-TYPE + SYNTAX INTEGER + { + daily(1), + once(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The event type." + ::= { timeSchedulerEntry 6 } + + + schedulerDateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The start date and the time of a daily or one-time event." + ::= { timeSchedulerEntry 7 } + + + schedulerTvStandard OBJECT-TYPE + SYNTAX TvStandard + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The TV standard." + ::= { timeSchedulerEntry 8 } + + + configuration2Table OBJECT-TYPE + SYNTAX SEQUENCE OF Configuration2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table for Type Configuration parameters of input 2." + ::= { detailedInfo 32 } + + + configuration2Entry OBJECT-TYPE + SYNTAX Configuration2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for the Type Configuration parameters of input 2." + AUGMENTS { configurationEntry } + ::= { configuration2Table 1 } + + + Configuration2Entry ::= + SEQUENCE { + config2TvStandardName + TvStandard, + config2RxFrequency + Integer32, + config2Frequency + Integer32, + config2Power + FloatingPoint, + config2InputSource + InputSource + } + + config2TvStandardName OBJECT-TYPE + SYNTAX TvStandard + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the TV standard as a text." + ::= { configuration2Entry 5 } + + + config2RxFrequency OBJECT-TYPE + SYNTAX Integer32 (160000000..910000000) + UNITS "Hz" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The input frequency for input 2." + ::= { configuration2Entry 6 } + + + config2Frequency OBJECT-TYPE + SYNTAX Integer32 (47000000..1500000000) + UNITS "Hz" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The output frequency for input 2." + ::= { configuration2Entry 7 } + + + config2Power OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "W" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The output power (0.0 ... 2500.0) for input 2." + ::= { configuration2Entry 8 } + + + config2InputSource OBJECT-TYPE + SYNTAX InputSource + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The source for input 2." + ::= { configuration2Entry 9 } + + + productInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF ProductInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table for product typeplates." + ::= { detailedInfo 100 } + + + productInfoEntry OBJECT-TYPE + SYNTAX ProductInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row (an entry) for one typeplate." + INDEX { prodInfoModuleIdx, prodInfoDeviceIdx, prodInfoRackIdx, prodInfoAmpIdx } + ::= { productInfoTable 1 } + + + ProductInfoEntry ::= + SEQUENCE { + prodInfoModuleIdx + ProdInfoModuleNameTv, + prodInfoDeviceIdx + IndexAB, + prodInfoRackIdx + IndexRack, + prodInfoAmpIdx + IndexAmplifier, + prodInfoModuleName + ProdInfoModuleNameTv, + prodInfoSerialNumber + ReadableString, + prodInfoIdentNumberSW + ReadableString, + prodInfoVersionNumberSW + ReadableString, + prodInfoIdentNumberHW + ReadableString, + prodInfoVersionNumberHW + ReadableString, + productInfoProductDateHW + DateAndTime + } + + prodInfoModuleIdx OBJECT-TYPE + SYNTAX ProdInfoModuleNameTv + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The module index." + ::= { productInfoEntry 1 } + + + prodInfoDeviceIdx OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The dedicated device (A/B)." + ::= { productInfoEntry 2 } + + + prodInfoRackIdx OBJECT-TYPE + SYNTAX IndexRack + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The rack number (1..10)." + ::= { productInfoEntry 3 } + + + prodInfoAmpIdx OBJECT-TYPE + SYNTAX IndexAmplifier + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Amplifier Index" + ::= { productInfoEntry 4 } + + + prodInfoModuleName OBJECT-TYPE + SYNTAX ProdInfoModuleNameTv + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the module as a text." + ::= { productInfoEntry 5 } + + + prodInfoSerialNumber OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The serial number of the subdevice." + ::= { productInfoEntry 6 } + + + prodInfoIdentNumberSW OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Rohde&Schwarz identification number of the software, for example 2094.2090.02." + ::= { productInfoEntry 7 } + + + prodInfoVersionNumberSW OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Rohde&Schwarz revision number of the software, for example 1.2.1." + ::= { productInfoEntry 8 } + + + prodInfoIdentNumberHW OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Rohde&Schwarz identification number of the hardware, for example 2095.8007.02 (NetCCU)." + ::= { productInfoEntry 9 } + + + prodInfoVersionNumberHW OBJECT-TYPE + SYNTAX ReadableString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Rohde&Schwarz revision number (product index) of the hardware, for example 03.03." + ::= { productInfoEntry 10 } + + + productInfoProductDateHW OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Rohde&Schwarz production date of the hardware," + ::= { productInfoEntry 11 } + + + logbook OBJECT IDENTIFIER ::= { rsXx8000DvbTxObjs 4 } + + + netCCUNumberOfEntries OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of entries in logbook." + ::= { logbook 1 } + + + netCCULogbookClear OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clear the logbook. + idle(1) --> ready + clear(2) --> do clear now + + A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything." + ::= { logbook 2 } + + + netCCULogbookTable OBJECT-TYPE + SYNTAX SEQUENCE OF NetCCULogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "NetCCU logbook table." + ::= { logbook 3 } + + + netCCULogbookEntry OBJECT-TYPE + SYNTAX NetCCULogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is a entry in the logbook." + INDEX { netCCULogbookEntryIdx } + ::= { netCCULogbookTable 1 } + + + NetCCULogbookEntry ::= + SEQUENCE { + netCCULogbookEntryIdx + LogbookMaxEntryNumber, + netCCULogbookEntryNbr + LogbookMaxEntryNumber, + netCCULogbookType + EventClass, + netCCULogbookSlope + LogbookEntrySlope, + netCCULogbookMessage + LogbookEntryMessagesNetCCU, + netCCULogbookDateTime + DateAndTime + } + + netCCULogbookEntryIdx OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is an increasing number from 1 to maximum. It is used as an index column for SNMP." + ::= { netCCULogbookEntry 1 } + + + netCCULogbookEntryNbr OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the number of the logbook entry. It is an decreasing number from maximum down to 1." + ::= { netCCULogbookEntry 2 } + + + netCCULogbookType OBJECT-TYPE + SYNTAX EventClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Can either be Fault, Warning or State." + ::= { netCCULogbookEntry 3 } + + + netCCULogbookSlope OBJECT-TYPE + SYNTAX LogbookEntrySlope + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Either set (event raises) or reset (event disappears)" + ::= { netCCULogbookEntry 4 } + + + netCCULogbookMessage OBJECT-TYPE + SYNTAX LogbookEntryMessagesNetCCU + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "See RS-XX8000-COMMON-MIB - TextualConvention - LogbookEntryMessagesNetCCU for details." + ::= { netCCULogbookEntry 5 } + + + netCCULogbookDateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "netCCULogbookDateTime" + ::= { netCCULogbookEntry 6 } + + + exciterANumberOfEntries OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of entries in logbook." + ::= { logbook 4 } + + + exciterALogbookClear OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clear the logbook. + idle(1) --> ready + clear(2) --> do clear now + + A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything." + ::= { logbook 5 } + + + exciterALogbookTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExciterALogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ExciterA logbook table." + ::= { logbook 6 } + + + exciterALogbookEntry OBJECT-TYPE + SYNTAX ExciterALogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is a entry in the logbook." + INDEX { excALogbookEntryIdx } + ::= { exciterALogbookTable 1 } + + + ExciterALogbookEntry ::= + SEQUENCE { + excALogbookEntryIdx + LogbookMaxEntryNumber, + excALogbookEntryNbr + LogbookMaxEntryNumber, + excALogbookType + EventClass, + excALogbookSlope + LogbookEntrySlope, + excALogbookMessage + LogbookEntryMessagesExcTv, + excALogbookDateTime + DateAndTime + } + + excALogbookEntryIdx OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is an increasing number from 1 to maximum. It is used as an index column for SNMP." + ::= { exciterALogbookEntry 1 } + + + excALogbookEntryNbr OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the number of the logbook entry. It is an decreasing number from maximum down to 1." + ::= { exciterALogbookEntry 2 } + + + excALogbookType OBJECT-TYPE + SYNTAX EventClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Can either be Fault, Warning or State." + ::= { exciterALogbookEntry 3 } + + + excALogbookSlope OBJECT-TYPE + SYNTAX LogbookEntrySlope + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Either set (event raises) or reset (event disappears)" + ::= { exciterALogbookEntry 4 } + + + excALogbookMessage OBJECT-TYPE + SYNTAX LogbookEntryMessagesExcTv + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "See RS-XX8000-COMMON-MIB - TextualConvention for details." + ::= { exciterALogbookEntry 5 } + + + excALogbookDateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time of the logbook entry." + ::= { exciterALogbookEntry 6 } + + + outputstageANumberOfEntries OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of entries in logbook." + ::= { logbook 7 } + + + outputstageALogbookClear OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clear the logbook. + idle(1) --> ready + clear(2) --> do clear now + + A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything." + ::= { logbook 8 } + + + outputstageALogbookTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutputstageALogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "OutputstageA logbook table." + ::= { logbook 9 } + + + outputstageALogbookEntry OBJECT-TYPE + SYNTAX OutputstageALogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is a entry in the logbook." + INDEX { ostALogbookEntryIdx } + ::= { outputstageALogbookTable 1 } + + + OutputstageALogbookEntry ::= + SEQUENCE { + ostALogbookEntryIdx + LogbookMaxEntryNumber, + ostALogbookEntryNbr + LogbookMaxEntryNumber, + ostALogbookType + EventClass, + ostALogbookSlope + LogbookEntrySlope, + ostALogbookMessage + LogbookEntryMessagesOST, + ostALogbookDateTime + DateAndTime + } + + ostALogbookEntryIdx OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is an increasing number from 1 to maximum. It is used as an index column for SNMP." + ::= { outputstageALogbookEntry 1 } + + + ostALogbookEntryNbr OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the number of the logbook entry. It is an decreasing number from maximum down to 1." + ::= { outputstageALogbookEntry 2 } + + + ostALogbookType OBJECT-TYPE + SYNTAX EventClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Can either be Fault, Warning or State." + ::= { outputstageALogbookEntry 3 } + + + ostALogbookSlope OBJECT-TYPE + SYNTAX LogbookEntrySlope + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Either set (event raises) or reset (event disappears)" + ::= { outputstageALogbookEntry 4 } + + + ostALogbookMessage OBJECT-TYPE + SYNTAX LogbookEntryMessagesOST + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "See RS-XX8000-COMMON-MIB - TextualConvention for details." + ::= { outputstageALogbookEntry 5 } + + + ostALogbookDateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time of the logbook entry." + ::= { outputstageALogbookEntry 6 } + + + exciterBNumberOfEntries OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of entries in logbook." + ::= { logbook 10 } + + + exciterBLogbookClear OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clear the logbook. + idle(1) --> ready + clear(2) --> do clear now + + A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything." + ::= { logbook 11 } + + + exciterBLogbookTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExciterBLogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "ExciterB logbook table." + ::= { logbook 12 } + + + exciterBLogbookEntry OBJECT-TYPE + SYNTAX ExciterBLogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is a entry in the logbook." + INDEX { excBLogbookEntryIdx } + ::= { exciterBLogbookTable 1 } + + + ExciterBLogbookEntry ::= + SEQUENCE { + excBLogbookEntryIdx + LogbookMaxEntryNumber, + excBLogbookEntryNbr + LogbookMaxEntryNumber, + excBLogbookType + EventClass, + excBLogbookSlope + LogbookEntrySlope, + excBLogbookMessage + LogbookEntryMessagesExcTv, + excBLogbookDateTime + DateAndTime + } + + excBLogbookEntryIdx OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is an increasing number from 1 to maximum. It is used as an index column for SNMP." + ::= { exciterBLogbookEntry 1 } + + + excBLogbookEntryNbr OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the number of the logbook entry. It is an decreasing number from maximum down to 1." + ::= { exciterBLogbookEntry 2 } + + + excBLogbookType OBJECT-TYPE + SYNTAX EventClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Can either be Fault, Warning or State." + ::= { exciterBLogbookEntry 3 } + + + excBLogbookSlope OBJECT-TYPE + SYNTAX LogbookEntrySlope + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Either set (event raises) or reset (event disappears)" + ::= { exciterBLogbookEntry 4 } + + + excBLogbookMessage OBJECT-TYPE + SYNTAX LogbookEntryMessagesExcTv + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "See RS-XX8000-COMMON-MIB - TextualConvention for details." + ::= { exciterBLogbookEntry 5 } + + + excBLogbookDateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time of the logbook entry." + ::= { exciterBLogbookEntry 6 } + + + outputstageBNumberOfEntries OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of entries in logbook." + ::= { logbook 13 } + + + outputstageBLogbookClear OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clear the logbook. + idle(1) --> ready + clear(2) --> do clear now + + A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything." + ::= { logbook 14 } + + + outputstageBLogbookTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutputstageBLogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "OutputstageB logbook table." + ::= { logbook 15 } + + + outputstageBLogbookEntry OBJECT-TYPE + SYNTAX OutputstageBLogbookEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is a entry in the logbook." + INDEX { ostBLogbookEntryIdx } + ::= { outputstageBLogbookTable 1 } + + + OutputstageBLogbookEntry ::= + SEQUENCE { + ostBLogbookEntryIdx + LogbookMaxEntryNumber, + ostBLogbookEntryNbr + LogbookMaxEntryNumber, + ostBLogbookType + EventClass, + ostBLogbookSlope + LogbookEntrySlope, + ostBLogbookMessage + LogbookEntryMessagesOST, + ostBLogbookDateTime + DateAndTime + } + + ostBLogbookEntryIdx OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is an increasing number from 1 to 128. It is used as an index column for SNMP." + ::= { outputstageBLogbookEntry 1 } + + + ostBLogbookEntryNbr OBJECT-TYPE + SYNTAX LogbookMaxEntryNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the number of the logbook entry. It is an decreasing number from max 128 down to 1." + ::= { outputstageBLogbookEntry 2 } + + + ostBLogbookType OBJECT-TYPE + SYNTAX EventClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Can either be Fault, Warning or State." + ::= { outputstageBLogbookEntry 3 } + + + ostBLogbookSlope OBJECT-TYPE + SYNTAX LogbookEntrySlope + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Either set (event raises) or reset (event disappears)" + ::= { outputstageBLogbookEntry 4 } + + + ostBLogbookMessage OBJECT-TYPE + SYNTAX LogbookEntryMessagesOST + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "See RS-XX8000-COMMON-MIB - TextualConvention for details." + ::= { outputstageBLogbookEntry 5 } + + + ostBLogbookDateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time of the logbook entry." + ::= { outputstageBLogbookEntry 6 } + + + rfProbesTable OBJECT-TYPE + SYNTAX SEQUENCE OF RfProbesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all commands for the RF probes." + ::= { rsXx8000DvbTxObjs 5 } + + + rfProbesEntry OBJECT-TYPE + SYNTAX RfProbesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for a designated transmitter and device." + INDEX { rfProbesOstIdx } + ::= { rfProbesTable 1 } + + + RfProbesEntry ::= + SEQUENCE { + rfProbesNetCCURfProbe1 + FloatingPoint, + rfProbesNetCCURfProbe2 + FloatingPoint, + rfProbesAntFwdNominal + FloatingPoint, + rfProbesAntFwdWarningLimit + FloatingPoint, + rfProbesAntFwdFailLimit + FloatingPoint, + rfProbesAntFwdDelayTimeRfFail + Integer32, + rfProbesAntFwdSetOffset + Trigger, + rfProbesAntFwdSetGain + Trigger, + rfProbesAntReflWarningLimit + FloatingPoint, + rfProbesAntReflSetOffset + Trigger, + rfProbesAntReflSetGain + Trigger, + rfProbesDLFwdNominal + FloatingPoint, + rfProbesDLFwdWarningLimit + FloatingPoint, + rfProbesDLFwdFailLimit + FloatingPoint, + rfProbesDLFwdDelayTimeRfFail + Integer32, + rfProbesDLFwdSetOffset + Trigger, + rfProbesDLFwdSetGain + Trigger, + rfProbesDLReflWarningLimit + FloatingPoint, + rfProbesDLReflSetOffset + Trigger, + rfProbesDLReflSetGain + Trigger, + rfProbesOstIdx + IndexAB, + rfProbesOstFwdNominal + FloatingPoint, + rfProbesOstFwdWarningLimit + FloatingPoint, + rfProbesOstFwdFailLimit + FloatingPoint, + rfProbesOstFwdDelayTimeRfFail + Integer32, + rfProbesOstFwdSetOffset + Trigger, + rfProbesOstFwdSetGain + Trigger, + rfProbesOstReflWarningLimit + FloatingPoint, + rfProbesOstReflSetOffset + Trigger, + rfProbesOstReflSetGain + Trigger + } + + rfProbesNetCCURfProbe1 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current voltage on RF Probe 1." + ::= { rfProbesEntry 1 } + + + rfProbesNetCCURfProbe2 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current voltage on RF Probe 2." + ::= { rfProbesEntry 2 } + + + rfProbesAntFwdNominal OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the nominal value [W] of the transmitter (to antenna)." + ::= { rfProbesEntry 3 } + + + rfProbesAntFwdWarningLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the warning limit for the transmitters RF control (to antenna)." + ::= { rfProbesEntry 4 } + + + rfProbesAntFwdFailLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the fault limit for the transmitters RF control (to antenna)." + ::= { rfProbesEntry 5 } + + + rfProbesAntFwdDelayTimeRfFail OBJECT-TYPE + SYNTAX Integer32 (1..20) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the delay time for the RF Fail control (to antenna)." + ::= { rfProbesEntry 6 } + + + rfProbesAntFwdSetOffset OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Offset." + ::= { rfProbesEntry 7 } + + + rfProbesAntFwdSetGain OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Gain." + ::= { rfProbesEntry 8 } + + + rfProbesAntReflWarningLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the warning limit for the transmitters reflection control (to antenna)." + ::= { rfProbesEntry 9 } + + + rfProbesAntReflSetOffset OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Offset." + ::= { rfProbesEntry 10 } + + + rfProbesAntReflSetGain OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Gain." + ::= { rfProbesEntry 11 } + + + rfProbesDLFwdNominal OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the nominal value [W] of the transmitter (to dummyload)." + ::= { rfProbesEntry 12 } + + + rfProbesDLFwdWarningLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the warning limit for the transmitters RF control (to dummyload)." + ::= { rfProbesEntry 13 } + + + rfProbesDLFwdFailLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the fault limit for the transmitters RF control (to dummyload)." + ::= { rfProbesEntry 14 } + + + rfProbesDLFwdDelayTimeRfFail OBJECT-TYPE + SYNTAX Integer32 (1..20) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the delay time for the RF Fail control (to dummyload)." + ::= { rfProbesEntry 15 } + + + rfProbesDLFwdSetOffset OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Offset." + ::= { rfProbesEntry 16 } + + + rfProbesDLFwdSetGain OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Gain." + ::= { rfProbesEntry 17 } + + + rfProbesDLReflWarningLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the warning limit for the transmitters reflection control (to dummyload)." + ::= { rfProbesEntry 18 } + + + rfProbesDLReflSetOffset OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Offset." + ::= { rfProbesEntry 19 } + + + rfProbesDLReflSetGain OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Gain." + ::= { rfProbesEntry 20 } + + + rfProbesOstIdx OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The dedicated outputstage (A/B)." + ::= { rfProbesEntry 21 } + + + rfProbesOstFwdNominal OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the nominal value [W] of the outputstage." + ::= { rfProbesEntry 22 } + + + rfProbesOstFwdWarningLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the warning limit for the outputstage RF control." + ::= { rfProbesEntry 23 } + + + rfProbesOstFwdFailLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the fault limit for the outputstage RF control." + ::= { rfProbesEntry 24 } + + + rfProbesOstFwdDelayTimeRfFail OBJECT-TYPE + SYNTAX Integer32 (1..20) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the delay time for the outputstage RF Fail control." + ::= { rfProbesEntry 25 } + + + rfProbesOstFwdSetOffset OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Offset." + ::= { rfProbesEntry 26 } + + + rfProbesOstFwdSetGain OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Gain." + ::= { rfProbesEntry 27 } + + + rfProbesOstReflWarningLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the warning limit for the outputstage reflection control." + ::= { rfProbesEntry 28 } + + + rfProbesOstReflSetOffset OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Offset." + ::= { rfProbesEntry 29 } + + + rfProbesOstReflSetGain OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This triggers Set Gain." + ::= { rfProbesEntry 30 } + + + rackTable OBJECT-TYPE + SYNTAX SEQUENCE OF RackEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains important commands for the racks." + ::= { rsXx8000DvbTxObjs 6 } + + + rackEntry OBJECT-TYPE + SYNTAX RackEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for a designated rack or rack's rf probe." + INDEX { ostDeviceIdx, rackIdx, rackRfProbeIdx } + ::= { rackTable 1 } + + + RackEntry ::= + SEQUENCE { + ostDeviceIdx + IndexAB, + rackIdx + IndexRack, + rackRfProbeIdx + INTEGER, + amplifiersPerRack + Integer32, + rackRfEventSignalling + TruthValue, + rackReferenceVoltage + FloatingPoint, + amplifiersPowerSupply + FloatingPoint, + rackGeneralPurposeInput + INTEGER, + rackOnOff + SwitchOnOff, + rfProbePresent + TruthValue, + rfProbeConfigurationLabel + ReadableString, + rfProbeConfigurationNominalValue + Integer32, + rfProbeThresholdRfFailLimit + FloatingPoint, + rfProbeThresholdTimeoutRfFailCtr + Integer32, + rfProbeThresholdWarningLimit + FloatingPoint, + rfProbeCalibrationGain + FloatingPoint, + rfProbeCalibrationOffset + FloatingPoint, + rfProbeCalibrationSetGain + Trigger, + rfProbeCalibrationSetOffset + Trigger, + rfProbeMeasuredValue + FloatingPoint + } + + ostDeviceIdx OBJECT-TYPE + SYNTAX IndexAB + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index to address outputstageA and outputstageB." + ::= { rackEntry 2 } + + + rackIdx OBJECT-TYPE + SYNTAX IndexRack + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index to address the racks." + ::= { rackEntry 3 } + + + rackRfProbeIdx OBJECT-TYPE + SYNTAX INTEGER + { + forward(1), + reflected(2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index to address forward and reflected RF probes. + For not RF probe parameters this index is always 1." + ::= { rackEntry 4 } + + + amplifiersPerRack OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of amplifiers of a rack." + ::= { rackEntry 6 } + + + rackRfEventSignalling OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This configures whether to signal rf events or not." + ::= { rackEntry 7 } + + + rackReferenceVoltage OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter controls the reference voltage (31.0 ... 100.0)." + ::= { rackEntry 8 } + + + amplifiersPowerSupply OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "percent" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter controls the power supplies of the amplifier + within the rack (31.0 ... 100.0)." + ::= { rackEntry 9 } + + + rackGeneralPurposeInput OBJECT-TYPE + SYNTAX INTEGER + { + unused(1), + doorOpen(2), + extCoolingWarning(3), + extCoolingFault(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting of the general purpose input behaviour." + ::= { rackEntry 10 } + + + rackOnOff OBJECT-TYPE + SYNTAX SwitchOnOff + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This switches the rack on/off." + ::= { rackEntry 20 } + + + rfProbePresent OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the RF probe of this rack is present." + ::= { rackEntry 50 } + + + rfProbeConfigurationLabel OBJECT-TYPE + SYNTAX ReadableString (SIZE (0..12)) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Name for the measured signal on RF Probe." + ::= { rackEntry 51 } + + + rfProbeConfigurationNominalValue OBJECT-TYPE + SYNTAX Integer32 (0..100000) + UNITS "W" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The nominal value of the measured signal." + ::= { rackEntry 52 } + + + rfProbeThresholdRfFailLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Fault limit for the RF control (-20.0 ... 0.0)." + ::= { rackEntry 55 } + + + rfProbeThresholdTimeoutRfFailCtr OBJECT-TYPE + SYNTAX Integer32 (1..20) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Timeout for RF Fail Control." + ::= { rackEntry 56 } + + + rfProbeThresholdWarningLimit OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Warning limit for the RF control (-20.0 ... 0.0). + + For reflected probes: + Warning limit for the reflection control. This limit is added to the + fault limit to generate the real warning limit; e.g. the fault limit + is -17.0dB and the warning limit is -3.0dB, so the warning is active + on a reflected power higher than -20.0 dB." + ::= { rackEntry 57 } + + + rfProbeCalibrationGain OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "V" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured value of gain calibration." + ::= { rackEntry 60 } + + + rfProbeCalibrationOffset OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "V" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured value of offset calibration." + ::= { rackEntry 61 } + + + rfProbeCalibrationSetGain OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the gain calibration." + ::= { rackEntry 62 } + + + rfProbeCalibrationSetOffset OBJECT-TYPE + SYNTAX Trigger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the offset calibration." + ::= { rackEntry 63 } + + + rfProbeMeasuredValue OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "W" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured forward/reflected power of antenna signal." + ::= { rackEntry 65 } + + + sx801AmplifierTable OBJECT-TYPE + SYNTAX SEQUENCE OF Sx801AmplifierEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Amplifier status values for SX801 amplifiers." + ::= { rsXx8000DvbTxObjs 7 } + + + sx801AmplifierEntry OBJECT-TYPE + SYNTAX Sx801AmplifierEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row (an entry) for one amplifier." + INDEX { sx801AmpIdx } + ::= { sx801AmplifierTable 1 } + + + Sx801AmplifierEntry ::= + SEQUENCE { + sx801AmpIdx + IndexAmplifier, + sx801AmpRfOut + Sx801AmplifierState, + sx801AmpRfIn + Sx801AmplifierState, + sx801AmpReflection + INTEGER, + sx801AmpOn + INTEGER, + sx801AmpAC + Sx801AmplifierState, + sx801AmpCommunication + INTEGER, + sx801AmpTransistor + Sx801AmplifierState, + sx801AmpDriver + Sx801AmplifierState, + sx801AmpTemperature + Sx801AmplifierState, + sx801AmpBlower + Sx801AmplifierState, + sx801AmpRegulation + Sx801AmplifierState, + sx801AmpUpdate + TruthValue, + sx801Supply1Temperature + Sx801AmplifierState, + sx801Supply2Temperature + Sx801AmplifierState, + sx801SupplyRTemperature + Sx801AmplifierState, + sx801Supply1DC + Sx801AmplifierState, + sx801Supply2DC + Sx801AmplifierState, + sx801SupplyRDC + Sx801AmplifierState, + sx801AmpValueI1 + FloatingPoint, + sx801AmpValueI2 + FloatingPoint, + sx801AmpValueI3 + FloatingPoint, + sx801AmpValueI4 + FloatingPoint, + sx801AmpValueIPre + FloatingPoint, + sx801AmpValueIDrv1 + FloatingPoint, + sx801AmpValueIDrv2 + FloatingPoint, + sx801AmpValuePowerOut + FloatingPoint, + sx801AmpValueReflection + FloatingPoint, + sx801AmpValueVRef + FloatingPoint, + sx801AmpValueVReg + FloatingPoint, + sx801AmpValueTemperature + FloatingPoint, + sx801AmpValueMonAtt + FloatingPoint, + sx801AmpValueVAux1 + FloatingPoint, + sx801AmpValueVAux2 + FloatingPoint, + sx801Supply1ValuePwr + FloatingPoint, + sx801Supply2ValuePwr + FloatingPoint, + sx801Supply1ValueDc + FloatingPoint, + sx801Supply2ValueDc + FloatingPoint + } + + sx801AmpIdx OBJECT-TYPE + SYNTAX IndexAmplifier + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The amplifier index." + ::= { sx801AmplifierEntry 1 } + + + sx801AmpRfOut OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows if the amplifier generates an RF or not. + off(1): The amplifier output is switched off + e.g. because the amplifier gets no input signal or the transmitter has been switched off + warning(2): There is an RF but its level is less than the RF warning limit. + ok(3): The RF level is greater than the RF warning limit." + ::= { sx801AmplifierEntry 2 } + + + sx801AmpRfIn OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the state of the amplifier input. + off(1): no input signal detected + warning(2): the level of the input signal is too low or too high. + ok(3): input signal is OK." + ::= { sx801AmplifierEntry 3 } + + + sx801AmpReflection OBJECT-TYPE + SYNTAX INTEGER + { + off(1), + warning(2), + unknown(3), + fault(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " A reflection on RF output of this Amplifier module has been detected. + This leads to a reduction of output power of the amplifier. + + " + ::= { sx801AmplifierEntry 4 } + + + sx801AmpOn OBJECT-TYPE + SYNTAX INTEGER + { + off(1), + on(3), + unknown(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows if the amplifier has been switched on by the control unit." + ::= { sx801AmplifierEntry 5 } + + + sx801AmpAC OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows the state of primary voltage of the power supply." + ::= { sx801AmplifierEntry 6 } + + + sx801AmpCommunication OBJECT-TYPE + SYNTAX INTEGER + { + off(1), + unknown(2), + ok(3), + fault(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays if the CAN communication between amplifier and Sx801 is working or not." + ::= { sx801AmplifierEntry 7 } + + + sx801AmpTransistor OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A transistor fail is displayed here. + For further information please see the amplifiers service menue." + ::= { sx801AmplifierEntry 8 } + + + sx801AmpDriver OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows a failure if one of the internal driver transistors does not work properly. + For further information please see the amplifiers service menue." + ::= { sx801AmplifierEntry 9 } + + + sx801AmpTemperature OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows a fault if the temperature of amplifier module is too high." + ::= { sx801AmplifierEntry 10 } + + + sx801AmpBlower OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays the state of the internal blowers." + ::= { sx801AmplifierEntry 11 } + + + sx801AmpRegulation OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows a fault if the amplifier is not able to control its output power." + ::= { sx801AmplifierEntry 12 } + + + sx801AmpUpdate OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Firmware update is in progress. + This will be started automatically during a software update procedure of the transmitter." + ::= { sx801AmplifierEntry 13 } + + + sx801Supply1Temperature OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows a fault if the temperature of power supply one is too high." + ::= { sx801AmplifierEntry 14 } + + + sx801Supply2Temperature OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows a fault if the temperature of power supply two is too high." + ::= { sx801AmplifierEntry 15 } + + + sx801SupplyRTemperature OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows a fault if the temperature of the reserve power supply is too high." + ::= { sx801AmplifierEntry 16 } + + + sx801Supply1DC OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows a fault if the output voltage of power supply one is not ok." + ::= { sx801AmplifierEntry 17 } + + + sx801Supply2DC OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows a fault if the output voltage of power supply two is not ok." + ::= { sx801AmplifierEntry 18 } + + + sx801SupplyRDC OBJECT-TYPE + SYNTAX Sx801AmplifierState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows a fault if the output voltage of the reserve power supply is not ok." + ::= { sx801AmplifierEntry 19 } + + + sx801AmpValueI1 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal current from transistor pair 1." + ::= { sx801AmplifierEntry 50 } + + + sx801AmpValueI2 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal current from transistor pair 2." + ::= { sx801AmplifierEntry 51 } + + + sx801AmpValueI3 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal current from transistor pair 3." + ::= { sx801AmplifierEntry 52 } + + + sx801AmpValueI4 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal current from transistor pair 4." + ::= { sx801AmplifierEntry 53 } + + + sx801AmpValueIPre OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal current from preamplifier." + ::= { sx801AmplifierEntry 54 } + + + sx801AmpValueIDrv1 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal current from driver transistor pair 1." + ::= { sx801AmplifierEntry 55 } + + + sx801AmpValueIDrv2 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Ampere" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal current from driver transistor pair 2." + ::= { sx801AmplifierEntry 56 } + + + sx801AmpValuePowerOut OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The base value in Volt to calculate the output power + of this amplifier module." + ::= { sx801AmplifierEntry 57 } + + + sx801AmpValueReflection OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The base value in Volt for detection of reflections." + ::= { sx801AmplifierEntry 58 } + + + sx801AmpValueVRef OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal reference voltage to set the output power." + ::= { sx801AmplifierEntry 59 } + + + sx801AmpValueVReg OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal value for output power regulation." + ::= { sx801AmplifierEntry 60 } + + + sx801AmpValueTemperature OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "degree Celsius" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal temperature of Amplifier. + In case of L-band amplifier, the shown temperature is valid only, + if the amplifier is switched on." + ::= { sx801AmplifierEntry 61 } + + + sx801AmpValueMonAtt OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "dB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The attenuation of monitoring output on the front of the + amplifier module (Amp RF Mon)." + ::= { sx801AmplifierEntry 62 } + + + sx801AmpValueVAux1 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The voltage power detector 1." + ::= { sx801AmplifierEntry 63 } + + + sx801AmpValueVAux2 OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The voltage power detector 2." + ::= { sx801AmplifierEntry 64 } + + + sx801Supply1ValuePwr OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power supply one control voltage." + ::= { sx801AmplifierEntry 65 } + + + sx801Supply2ValuePwr OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power supply two control voltage." + ::= { sx801AmplifierEntry 66 } + + + sx801Supply1ValueDc OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal supply voltage of transistor path two. + In systems with two power supplies this value is equal + to the output voltage of supply one." + ::= { sx801AmplifierEntry 67 } + + + sx801Supply2ValueDc OBJECT-TYPE + SYNTAX FloatingPoint + UNITS "Volt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The internal supply voltage of transistor path two. + In systems with two power supplies this value is equal + to the output voltage of supply two." + ::= { sx801AmplifierEntry 68 } + + +-- ***************************************************************************** +-- ** event definitions +-- ***************************************************************************** + rsXx8000DvbTxEvents OBJECT IDENTIFIER ::= { rsXx8000DvbTx 3 } + + +-- ***************************************************************************** +-- ** events transmitter +-- ***************************************************************************** + eventTx OBJECT IDENTIFIER ::= { rsXx8000DvbTxEvents 2 } + + + eventsTxV2 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Compatibility to SMIv1." + ::= { eventTx 0 } + + + txSummaryFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Transmitter Summary Fault" + ::= { eventsTxV2 1 } + + + txSummaryWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Transmitter Summary Warning" + ::= { eventsTxV2 2 } + + + txLocal NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Transmitter Local/Remote" + ::= { eventsTxV2 3 } + + + txRfOn NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Transmitter RF On/Off" + ::= { eventsTxV2 4 } + + + txRfOk NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Transmitter RF Ok / Not OK" + ::= { eventsTxV2 5 } + + + txParamSetSubDeviceDiffers NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS obsolete + DESCRIPTION + "Parameterset of subdevice is different. + The currently loaded parameterset is inconsistent because + a subdevice (e.g. an exciter) has a different configuration than expected. + To correct this, save settings to the current or save a complete new." + ::= { eventsTxV2 6 } + + + txParamSetValuesChanged NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Value Of Current Parameterset Changed. + The currently loaded parameterset is inconsistent because + there were changes happening since the load/save of it. + To correct this, save settings to the current or save a complete new." + ::= { eventsTxV2 7 } + + + txRfLoopProgram NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Loop Program" + ::= { eventsTxV2 8 } + + + txRfLoopReserve NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Loop Reserve" + ::= { eventsTxV2 9 } + + + txRfWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU RF Warning" + ::= { eventsTxV2 10 } + + + txReflectionWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Reflection Warning" + ::= { eventsTxV2 11 } + + + txNetCCUFanFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Fan Fault. + This is valid, if Fan Control is switched on (see menu NetCCU Setup - Common)." + ::= { eventsTxV2 12 } + + + txNetCCUPowerSupply NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Power Supply" + ::= { eventsTxV2 13 } + + + txRfFail NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU RF Fail" + ::= { eventsTxV2 14 } + + + txReflectionFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Reflection Fault" + ::= { eventsTxV2 15 } + + + txNetCCUBoardTemperatureFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS deprecated + DESCRIPTION + "NetCCU Board Temperature Fault + + deprecated: this information is now handled as a warning + (txNetCCUBoardTemperatureWarning)" + ::= { eventsTxV2 16 } + + + txNetCCUNoConnectionToExcA NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Connection To ExciterA Faulty" + ::= { eventsTxV2 17 } + + + txNetCCUNoConnectionToOstA NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Connection To OutputstageA Faulty" + ::= { eventsTxV2 18 } + + + txNetCCUNoConnectionToExcB NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Connection To ExciterB Faulty" + ::= { eventsTxV2 19 } + + + txNetCCUNoConnectionToOstB NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Connection To OutputstageB Faulty" + ::= { eventsTxV2 20 } + + + txAutomaticExcReady NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Exciter Automatic Ready." + ::= { eventsTxV2 21 } + + + txAutomaticExcChanged NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Exciter Automatic Changed." + ::= { eventsTxV2 22 } + + + txAutomaticExcFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Exciter Automatic Fault." + ::= { eventsTxV2 23 } + + + txAutomaticOstReady NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Outputstage Automatic Ready. + + This paramter is only available for systems with an automatic output switch." + ::= { eventsTxV2 24 } + + + txAutomaticOstChanged NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Outputstage Automatic Changed. + + This paramter is only available for systems with an automatic output switch." + ::= { eventsTxV2 25 } + + + txAutomaticOstFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Outputstage Automatic Fault. + + This paramter is only available for systems with an automatic output switch." + ::= { eventsTxV2 26 } + + + txNetCCUBoardTemperatureWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU Board Temperature Warning" + ::= { eventsTxV2 27 } + + + txInternalPowerSupplyWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU internal Power Supply warning" + ::= { eventsTxV2 30 } + + + txExternalPowerSupplyWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "NetCCU external (additional) Power Supply warning" + ::= { eventsTxV2 31 } + + + txModeSwitchOverStarted NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Switch over of TX mode started." + ::= { eventsTxV2 35 } + + + txModeSwitchOverEnded NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Switch over of TX mode ended." + ::= { eventsTxV2 36 } + + + txModeInconsistent NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "An inconsistency in configuration of TX mode was detected. + The CCU and exiter configurations are incompatible." + ::= { eventsTxV2 37 } + + + txModeSwitchOverFailed NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent } + STATUS current + DESCRIPTION + "Switch over of TX mode failed. + Please check whether the configurations of CCU and exciter are correct." + ::= { eventsTxV2 38 } + + + txExcSummaryFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Summary Fault" + ::= { eventsTxV2 100 } + + + txExcSummaryWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Summary Warning" + ::= { eventsTxV2 101 } + + + txExcLocal NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Local/Remote" + ::= { eventsTxV2 102 } + + + txExcRfOk NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter RF Ok" + ::= { eventsTxV2 104 } + + + txExcInputNoConnectHP1 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Input HP1 has no connected input signal" + ::= { eventsTxV2 105 } + + + txExcInputNoConnectLP1 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Input LP1 has no connected input signal" + ::= { eventsTxV2 106 } + + + txExcInputNoConnectHP2 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Input HP2 has no connected input signal" + ::= { eventsTxV2 107 } + + + txExcInputNoConnectLP2 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Input LP2 has no connected input signal" + ::= { eventsTxV2 108 } + + + txExcInputActiveHP1 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Input HP1 is active" + ::= { eventsTxV2 109 } + + + txExcInputActiveLP1 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Input LP1 is active" + ::= { eventsTxV2 110 } + + + txExcInputActiveHP2 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Input HP2 is active" + ::= { eventsTxV2 111 } + + + txExcInputActiveLP2 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Input LP2 is active" + ::= { eventsTxV2 112 } + + + txExcOn NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter On" + ::= { eventsTxV2 113 } + + + txExcRfOn NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter RF On" + ::= { eventsTxV2 114 } + + + txExcNoInput NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter has no valid input signal." + ::= { eventsTxV2 115 } + + + txExcRfLoop NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter RF loop" + ::= { eventsTxV2 116 } + + + txExcRfFail NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter RF Fail" + ::= { eventsTxV2 117 } + + + txExcSelfTest NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter hardware self test" + ::= { eventsTxV2 118 } + + + txExcOutputOpen NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter output open" + ::= { eventsTxV2 119 } + + + txExcBoardTemperatureWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Board Temperature" + ::= { eventsTxV2 120 } + + + txExcFanWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter has one faulty fan" + ::= { eventsTxV2 121 } + + + txExcFanFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Both exciter fans are faulty." + ::= { eventsTxV2 122 } + + + txExcFifoWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Fifo" + ::= { eventsTxV2 123 } + + + txExcTestSignal NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Testsignal Active" + ::= { eventsTxV2 124 } + + + txExcSFNDelay NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter SFN Delay Fault" + ::= { eventsTxV2 125 } + + + txExcWrongDatarate NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Wrong Datarate" + ::= { eventsTxV2 126 } + + + txExcMute NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Mute" + ::= { eventsTxV2 127 } + + + txExcPPSFail NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter PPS Fail" + ::= { eventsTxV2 128 } + + + txExcReferenceFail NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter Reference Fail" + ::= { eventsTxV2 129 } + + + txExcMIPFail NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Exciter MIP Fail" + ::= { eventsTxV2 130 } + + + txExcInputAutomaticSwitchReady NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Input automatic is ready." + ::= { eventsTxV2 131 } + + + txExcInputAutomaticChangedOver NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Input automatic changed over." + ::= { eventsTxV2 132 } + + + txExcInputReseveMissing NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "Missing input, or automatic switching enabled with only one input present. + Disable automatic switching or press reset fault to remove this warning. + Monitoring of a second input will start automatically if two input signals have been detected. + + This event will be generated only if cmdExcExpectInputReserve is set to on(1)." + ::= { eventsTxV2 133 } + + + txOstSummaryFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage Summary Fault" + ::= { eventsTxV2 200 } + + + txOstSummaryWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage Summary Warning" + ::= { eventsTxV2 201 } + + + txOstRfOn NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage RF On" + ::= { eventsTxV2 202 } + + + txOstRfOk NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage RF Ok" + ::= { eventsTxV2 203 } + + + txOstNoInput NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage no input signal" + ::= { eventsTxV2 204 } + + + txOstRfWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage RF Warning" + ::= { eventsTxV2 205 } + + + txOstReflectionWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage Reflection Warning" + ::= { eventsTxV2 206 } + + + txOstRackWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage Rack Warning. At least one rack has an error pending." + ::= { eventsTxV2 207 } + + + txOstCoolingWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage Cooling Warning" + ::= { eventsTxV2 208 } + + + txOstRfFail NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage RF Fail" + ::= { eventsTxV2 209 } + + + txOstReflectionFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage Reflection Fault" + ::= { eventsTxV2 210 } + + + txOstACFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage AC Fault" + ::= { eventsTxV2 211 } + + + txOstCoolingFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage Cooling Fault" + ::= { eventsTxV2 212 } + + + txOstCommFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB } + STATUS current + DESCRIPTION + "Outputstage Communication Fault" + ::= { eventsTxV2 213 } + + + txRackSumFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "Summary Fault at a designated rack. + This event automatically leads to txOstRackWarning." + ::= { eventsTxV2 300 } + + + txRackSumWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "Summary Warning at a designated rack." + ::= { eventsTxV2 301 } + + + txRackOn NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated racks operation mode is on." + ::= { eventsTxV2 302 } + + + txRackGpiWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "A warning on the general purpose input occurred. + This depends on the current configuration of the GPI. (See:Rack Setup/Rack Controller)" + ::= { eventsTxV2 303 } + + + txRackFan1Fault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals a fault of fan 1." + ::= { eventsTxV2 304 } + + + txRackFan2Fault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals a fault of fan 2." + ::= { eventsTxV2 305 } + + + txRackCoolingSumWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals a summary cooling warning." + ::= { eventsTxV2 306 } + + + txRackAmplifierSumFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals at least one faulty amplifier." + ::= { eventsTxV2 307 } + + + txRackNoLink NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "No communication to the designated rack." + ::= { eventsTxV2 308 } + + + txRackGpiFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "A fault on the general purpose input occurred. + This depends on the current configuration of the GPI. (See:Rack Setup/Rack Controller)" + ::= { eventsTxV2 309 } + + + txRackTemperatureFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals a temperature fault - temperature too high." + ::= { eventsTxV2 310 } + + + txRackACFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals an AC (phase) fault." + ::= { eventsTxV2 311 } + + + txRackCoolingSumFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals a summary cooling fault." + ::= { eventsTxV2 312 } + + + txRackTempFaultAbs1 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals a temperature fault of absorber 1." + ::= { eventsTxV2 313 } + + + txRackTempFaultAbs2 NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals a temperature fault of absorber 2." + ::= { eventsTxV2 314 } + + + txRackDCFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The designated rack signals a DC fault." + ::= { eventsTxV2 315 } + + + txRackRfOn NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "RF power is on." + ::= { eventsTxV2 318 } + + + txRackRfOk NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "RF power is ok." + ::= { eventsTxV2 319 } + + + txRackRfWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "RF power decreased the warning threshold." + ::= { eventsTxV2 320 } + + + txRackRfFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "RF output power decreased the fault threshold." + ::= { eventsTxV2 321 } + + + txRackReflectionWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The reflected power increased the warning threshold" + ::= { eventsTxV2 322 } + + + txRackReflectionFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "The reflected power increased the fault threshold." + ::= { eventsTxV2 323 } + + + txRackProbeNotCalibrated NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "At least one probe is not calibrated." + ::= { eventsTxV2 330 } + + + txRackTemperatureWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "Rack temperature exceeded the warning threshold." + ::= { eventsTxV2 331 } + + + txRackOvervoltProtectWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack + } + STATUS current + DESCRIPTION + "Overvoltage protection is out of order." + ::= { eventsTxV2 335 } + + + txAmpSumFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifier signals summary fault." + ::= { eventsTxV2 400 } + + + txAmpSumWarning NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifier signals summary warning." + ::= { eventsTxV2 401 } + + + txAmpPowerOn NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifiers power is on." + ::= { eventsTxV2 402 } + + + txAmpDCOk NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifiers DC is ok." + ::= { eventsTxV2 403 } + + + txAmpACOk NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifiers AC is ok." + ::= { eventsTxV2 404 } + + + txAmpRfInFail NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifier signals RF input fail." + ::= { eventsTxV2 405 } + + + txAmpRfFail NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifier signals RF fail." + ::= { eventsTxV2 406 } + + + txAmpReflectionFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifier signals a reflection fault." + ::= { eventsTxV2 407 } + + + txAmpTemperatureFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifier signals a temperature fault - temperature is too high." + ::= { eventsTxV2 408 } + + + txAmpTransistorFault NOTIFICATION-TYPE + OBJECTS { eventAlarmPriority, eventAlarmClass, eventEvent, indexAB, indexRack, + indexAmplifier } + STATUS current + DESCRIPTION + "The designated amplifier signals at least one faulty transistor." + ::= { eventsTxV2 409 } + + + eventsTxTable OBJECT-TYPE + SYNTAX SEQUENCE OF EventsTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains necessary information for handling alarms. + For each alarm you have the following information: + - name (get), + - mask to enable/disable sending out (set/get), + - priority (set/get) and + - the current state (get only)." + ::= { eventTx 1 } + + + eventsTxEntry OBJECT-TYPE + SYNTAX EventsTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An event entry always consists of its indexes + (used for addressing within redundancy systems) and 3 values: + - name: an enumerated list of all possible notifications + - mask: the corresponding mask (enable/disable) + - priority: the corresponding priority (value in range 0..255) + - event: the event itself (active/inactive)" + INDEX { eventTxABIdx, eventTxRackIdx, eventTxAmpIdx, eventTxNameIdx } + ::= { eventsTxTable 1 } + + + EventsTxEntry ::= + SEQUENCE { + eventTxABIdx + INTEGER, + eventTxRackIdx + Integer32, + eventTxAmpIdx + Integer32, + eventTxNameIdx + EventMaxEntryNumber, + eventTxName + INTEGER, + eventTxMask + EventMask, + eventTxPriority + EventPriority, + eventTxEvent + EventState + } + + eventTxABIdx OBJECT-TYPE + SYNTAX INTEGER + { + a(1), + b(2) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value for the module A (exciterA, outputstageA) or + B (exciterB, outputstageB) for alarms. + This is a helper column and therefore not-accessible." + ::= { eventsTxEntry 1 } + + + eventTxRackIdx OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The number of the designated rack. + This is a helper column and therefore not-accessible." + ::= { eventsTxEntry 2 } + + + eventTxAmpIdx OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The number of the designated amplifier. + This is a helper column and therefore not-accessible." + ::= { eventsTxEntry 3 } + + + eventTxNameIdx OBJECT-TYPE + SYNTAX EventMaxEntryNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The event number as integer. + This is a helper column and therefore not-accessible." + ::= { eventsTxEntry 4 } + + + eventTxName OBJECT-TYPE + SYNTAX INTEGER + { + txSummaryFault(1), + txSummaryWarning(2), + txLocal(3), + txRfOn(4), + txRfOk(5), + txParamSetSubDeviceDiffers(6), + txParamSetValuesChanged(7), + txRfLoopProgram(8), + txRfLoopReserve(9), + txRfWarning(10), + txReflectionWarning(11), + txNetCCUFanFault(12), + txNetCCUPowerSupply(13), + txRfFail(14), + txReflectionFault(15), + txNetCCUBoardTemperatureFault(16), + txNetCCUNoConnectionToExcA(17), + txNetCCUNoConnectionToOstA(18), + txNetCCUNoConnectionToExcB(19), + txNetCCUNoConnectionToOstB(20), + txAutomaticExcReady(21), + txAutomaticExcChanged(22), + txAutomaticExcFault(23), + txAutomaticOstReady(24), + txAutomaticOstChanged(25), + txAutomaticOstFault(26), + txNetCCUBoardTemperatureWarning(27), + txInternalPowerSupplyWarning(30), + txExternalPowerSupplyWarning(31), + txModeSwitchOverStarted(35), + txModeSwitchOverEnded(36), + txModeInconsistent(37), + txModeSwitchOverFailed(38), + txExcSummaryFault(100), + txExcSummaryWarning(101), + txExcLocal(102), + txExcRfOk(104), + txExcInputNoConnectHP1(105), + txExcInputNoConnectLP1(106), + txExcInputNoConnectHP2(107), + txExcInputNoConnectLP2(108), + txExcInputActiveHP1(109), + txExcInputActiveLP1(110), + txExcInputActiveHP2(111), + txExcInputActiveLP2(112), + txExcOn(113), + txExcRfOn(114), + txExcNoInput(115), + txExcRfLoop(116), + txExcRfFail(117), + txExcSelfTest(118), + txExcOutputOpen(119), + txExcBoardTemperatureWarning(120), + txExcFanWarning(121), + txExcFanFault(122), + txExcFifoWarning(123), + txExcTestSignal(124), + txExcSFNDelay(125), + txExcWrongDatarate(126), + txExcMute(127), + txExcPPSFail(128), + txExcReferenceFail(129), + txExcMIPFail(130), + txExcInputAutomaticSwitchReady(131), + txExcInputAutomaticChangedOver(132), + txExcInputReseveMissing(133), + txOstSummaryFault(200), + txOstSummaryWarning(201), + txOstRfOn(202), + txOstRfOk(203), + txOstNoInput(204), + txOstRfWarning(205), + txOstReflectionWarning(206), + txOstRackWarning(207), + txOstCoolingWarning(208), + txOstRfFail(209), + txOstReflectionFault(210), + txOstACFault(211), + txOstCoolingFault(212), + txOstCommFault(213), + txRackSumFault(300), + txRackSumWarning(301), + txRackOn(302), + txRackGpiWarning(303), + txRackFan1Fault(304), + txRackFan2Fault(305), + txRackCoolingSumWarning(306), + txRackAmplifierSumFault(307), + txRackNoLink(308), + txRackGpiFault(309), + txRackTemperatureFault(310), + txRackACFault(311), + txRackCoolingSumFault(312), + txRackTempFaultAbs1(313), + txRackTempFaultAbs2(314), + txRackDCFault(315), + txRackRfOn(318), + txRackRfOk(319), + txRackRfWarning(320), + txRackRfFault(321), + txRackReflectionWarning(322), + txRackReflectionFault(323), + txRackProbeNotCalibrated(330), + txRackTemperatureWarning(331), + txRackOvervoltProtectWarning(335), + txAmpSumFault(400), + txAmpSumWarning(401), + txAmpPowerOn(402), + txAmpDCOk(403), + txAmpACOk(404), + txAmpRfInFail(405), + txAmpRfFail(406), + txAmpReflectionFault(407), + txAmpTemperatureFault(408), + txAmpTransistorFault(409) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The event number as integer and the value as readable text. + The enumeration correlates with the notifications under eventsTxV2." + ::= { eventsTxEntry 5 } + + + eventTxMask OBJECT-TYPE + SYNTAX EventMask + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "See TextualConvention for details." + ::= { eventsTxEntry 6 } + + + eventTxPriority OBJECT-TYPE + SYNTAX EventPriority + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "See TextualConvention for details." + ::= { eventsTxEntry 7 } + + + eventTxEvent OBJECT-TYPE + SYNTAX EventState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "See TextualConvention for details." + ::= { eventsTxEntry 8 } + + +-- ***************************************************************************** +-- ** conformance statements +-- ***************************************************************************** + rsXx8000DvbTxConf OBJECT IDENTIFIER ::= { rsXx8000DvbTx 5 } + + + rsXx8000DvbTxGroups OBJECT IDENTIFIER ::= { rsXx8000DvbTxConf 1 } + + + groupEvents OBJECT-GROUP + OBJECTS { eventTxName, eventTxMask, eventTxPriority, eventTxEvent } + STATUS current + DESCRIPTION + "This group includes all OIDs for event handling." + ::= { rsXx8000DvbTxGroups 1 } + + + groupTxCommon OBJECT-GROUP + OBJECTS { cmdTxResetSumFault, cmdTxParametersetLoad, cmdTxParametersetSave, cmdTxOperationModeProgram, summaryFaultTx, + summaryWarningTx, localModeTx, rfOnTx, forwardPower, summaryFaultExcA + } + STATUS current + DESCRIPTION + "Group for common transmitter objects" + ::= { rsXx8000DvbTxGroups 2 } + + + groupEventsTxCommon NOTIFICATION-GROUP + NOTIFICATIONS { txSummaryFault, txSummaryWarning, txLocal, txRfOn, txParamSetValuesChanged, + txRfLoopProgram, txRfFail, txOstSummaryFault, txOstSummaryWarning, txRfOk, + txOstRfOn, txRfWarning } + STATUS current + DESCRIPTION + "This group includes all alarm OIDs that are common for all reserve concepts." + ::= { rsXx8000DvbTxGroups 3 } + + + groupDualDrive OBJECT-GROUP + OBJECTS { cmdTxOperationModeReserve, cmdTxOpModeExcAutomatic, cmdTxPreselectExciter, cmdTxDelayTimeExcAutomatic, exciterBNumberOfEntries, + exciterBLogbookClear, excBLogbookEntryNbr, excBLogbookType, excBLogbookSlope, excBLogbookMessage, + excBLogbookDateTime, summaryFaultExcB, exciterAutomaticReady, exciterAutomaticChanged, exciterAutomaticFault, + noConnectionExcB, activeExcA, activeExcB } + STATUS current + DESCRIPTION + "This group includes additional objects for reserve concepts + DualDrive (NetCCU + 2 * exciter + outputstage) + and + Active/Passive Reserve (NetCCU + 2 * exciter + 2 * outputstage) + " + ::= { rsXx8000DvbTxGroups 4 } + + + groupEventsDualDrive NOTIFICATION-GROUP + NOTIFICATIONS { txRfLoopReserve, txNetCCUNoConnectionToExcB, txAutomaticExcReady, txAutomaticExcChanged, txAutomaticExcFault + } + STATUS current + DESCRIPTION + "This group includes additional events for reserve concepts + DualDrive (NetCCU + 2 * exciter + outputstage) + and + Active/Passive Reserve (NetCCU + 2 * exciter + 2 * outputstage) + " + ::= { rsXx8000DvbTxGroups 5 } + + + groupPowerReserve OBJECT-GROUP + OBJECTS { cmdTxOpModeOstAutomatic, cmdTxPreselectOutputstage, cmdTxDelayTimeOstAutomatic, summaryFaultOstB, outputstageAutomaticReady, + outputstageAutomaticChanged, outputstageAutomaticFault, noConnectionOstB, activeOstA, activeOstB + } + STATUS current + DESCRIPTION + "This group includes additional objects for reserve concept + Active/Passive Reserve (NetCCU + 2 * exciter + 2 * outputstage) + For more details, refer to manual." + ::= { rsXx8000DvbTxGroups 6 } + + + groupEventsPowerReserve NOTIFICATION-GROUP + NOTIFICATIONS { txNetCCUNoConnectionToOstB, txAutomaticOstReady, txAutomaticOstChanged, txAutomaticOstFault } + STATUS current + DESCRIPTION + "This group includes additional events for reserve concept + Active/Passive Reserve (NetCCU + 2 * exciter + 2 * outputstage) + For more details, refer to manual." + ::= { rsXx8000DvbTxGroups 7 } + + + groupCommonMP OBJECT-GROUP + OBJECTS { cmdOstRefVoltageVision, cmdOstMaxOutletTempThreshold, outputstageANumberOfEntries, outputstageALogbookClear, ostALogbookEntryNbr, + ostALogbookType, ostALogbookSlope, ostALogbookMessage, ostALogbookDateTime, reflectedPower, + ostRackInletTemperature, ostRackOutletTemperature, ostRackAuxPowerSupply, amplifiersPerRack, rackRfEventSignalling, + rackGeneralPurposeInput, rfProbePresent, rfProbeConfigurationNominalValue, rfProbeThresholdRfFailLimit, rfProbeThresholdTimeoutRfFailCtr, + rfProbeThresholdWarningLimit, rfProbeCalibrationGain, rfProbeCalibrationOffset, rfProbeCalibrationSetGain, rfProbeCalibrationSetOffset, + rfProbeMeasuredValue } + STATUS current + DESCRIPTION + "additional objects for medium/high power" + ::= { rsXx8000DvbTxGroups 8 } + + + groupEventsCommonMP NOTIFICATION-GROUP + NOTIFICATIONS { txReflectionWarning, txReflectionFault, txOstRfOk, txOstNoInput, txOstRfWarning, + txOstReflectionWarning, txOstRackWarning, txOstCoolingWarning, txOstRfFail, txOstReflectionFault, + txOstACFault, txOstCoolingFault, txOstCommFault, txRackSumFault, txRackSumWarning, + txRackOn, txRackGpiWarning, txRackFan1Fault, txRackFan2Fault, txRackCoolingSumWarning, + txRackAmplifierSumFault, txRackNoLink, txRackGpiFault, txRackTemperatureFault, txRackACFault, + txRackCoolingSumFault, txRackTempFaultAbs1, txRackTempFaultAbs2, txRackDCFault, txRackRfWarning, + txRackRfFault, txRackReflectionWarning, txRackReflectionFault, txRackRfOk, txRackRfOn, + txRackOvervoltProtectWarning, txRackTemperatureWarning, txRackProbeNotCalibrated } + STATUS current + DESCRIPTION + "additional events for medium/high power" + ::= { rsXx8000DvbTxGroups 9 } + + + groupCommonNetCCU OBJECT-GROUP + OBJECTS { netCCUNumberOfEntries, netCCULogbookClear, netCCULogbookEntryNbr, netCCULogbookType, netCCULogbookSlope, + netCCULogbookMessage, netCCULogbookDateTime, powerSupply, cmdTxSystemMode, additionalPowerSupply, + summaryFaultOstA, noConnectionExcA, noConnectionOstA } + STATUS current + DESCRIPTION + "additional objects for transmitters with NetCCU" + ::= { rsXx8000DvbTxGroups 10 } + + + groupEventsCommonNetCCU NOTIFICATION-GROUP + NOTIFICATIONS { txNetCCUFanFault, txNetCCUPowerSupply, txNetCCUNoConnectionToExcA, txNetCCUNoConnectionToOstA, txModeSwitchOverStarted, + txModeSwitchOverEnded, txModeInconsistent, txModeSwitchOverFailed, txNetCCUBoardTemperatureWarning } + STATUS current + DESCRIPTION + "additional events for transmitters with NetCCU" + ::= { rsXx8000DvbTxGroups 11 } + + + groupOstBLogbook OBJECT-GROUP + OBJECTS { outputstageBNumberOfEntries, outputstageBLogbookClear, ostBLogbookEntryNbr, ostBLogbookType, ostBLogbookSlope, + ostBLogbookMessage, ostBLogbookDateTime } + STATUS current + DESCRIPTION + "objects of logbook for output stage B" + ::= { rsXx8000DvbTxGroups 12 } + + + groupSumProbe OBJECT-GROUP + OBJECTS { forwardPowerOstA, reflectedPowerOstA, forwardPowerOstB, reflectedPowerOstB } + STATUS current + DESCRIPTION + "objects that are available only when sum probe exists" + ::= { rsXx8000DvbTxGroups 14 } + + + groupProductInfo OBJECT-GROUP + OBJECTS { prodInfoModuleName, prodInfoSerialNumber, prodInfoIdentNumberSW, prodInfoVersionNumberSW, productInfoProductDateHW, + prodInfoIdentNumberHW, prodInfoVersionNumberHW } + STATUS current + DESCRIPTION + "This group includes all OIDs for device product information." + ::= { rsXx8000DvbTxGroups 18 } + + + groupAmpMeasureValues OBJECT-GROUP + OBJECTS { ostRackAmpI1A, ostRackAmpI2A, ostRackAmpI3A, ostRackAmpI4A, ostRackAmpI1B, + ostRackAmpI2B, ostRackAmpI3B, ostRackAmpI4B, ostRackAmpIDrv, ostRackAmpUDc, + ostRackAmpIDc, ostRackAmpUDcControl, ostRackAmpUReg, ostRackAmpPowerA, ostRackAmpPowerB, + ostRackAmpPowerOut, ostRackAmpPowerReflection, ostRackAmpPowerReference, ostRackAmpDeltaPhase, ostRackAmpCmdDeltaPhase + } + STATUS current + DESCRIPTION + "This group includes all OIDs amplifier measure values. + Practically, these information are not important to customers, they are needed in manufactory." + ::= { rsXx8000DvbTxGroups 19 } + + + groupEventsAmplifier NOTIFICATION-GROUP + NOTIFICATIONS { txAmpSumFault, txAmpSumWarning, txAmpPowerOn, txAmpDCOk, txAmpACOk, + txAmpRfInFail, txAmpRfFail, txAmpReflectionFault, txAmpTemperatureFault, txAmpTransistorFault + } + STATUS current + DESCRIPTION + "events from the amplifier (medium/high power only)" + ::= { rsXx8000DvbTxGroups 20 } + + + groupRfProbes OBJECT-GROUP + OBJECTS { rfProbesNetCCURfProbe1, rfProbesNetCCURfProbe2, rfProbesAntFwdNominal, rfProbesAntFwdWarningLimit, rfProbesAntFwdFailLimit, + rfProbesAntFwdDelayTimeRfFail, rfProbesAntFwdSetOffset, rfProbesAntFwdSetGain, rfProbesAntReflWarningLimit, rfProbesAntReflSetOffset, + rfProbesAntReflSetGain, rfProbesOstFwdNominal, rfProbesOstFwdWarningLimit, rfProbesOstFwdFailLimit, rfProbesOstFwdDelayTimeRfFail, + rfProbesOstFwdSetOffset, rfProbesOstFwdSetGain, rfProbesOstReflWarningLimit, rfProbesOstReflSetOffset, rfProbesOstReflSetGain + } + STATUS current + DESCRIPTION + "This group includes all OIDs regarding RF Probes." + ::= { rsXx8000DvbTxGroups 21 } + + + groupDummyLoadRF OBJECT-GROUP + OBJECTS { rfProbesDLFwdNominal, rfProbesDLFwdWarningLimit, rfProbesDLFwdFailLimit, rfProbesDLFwdDelayTimeRfFail, rfProbesDLFwdSetOffset, + rfProbesDLFwdSetGain, rfProbesDLReflWarningLimit, rfProbesDLReflSetOffset, rfProbesDLReflSetGain } + STATUS current + DESCRIPTION + "This group includes all object types regarding probes from dummy load. + The object types in this group are defined only when a dummy load measure point exists. + This can occur in reserve concept active reserve only. + " + ::= { rsXx8000DvbTxGroups 22 } + + + groupExcCommon OBJECT-GROUP + OBJECTS { cmdExcOpModeInputAutomatic, cmdExcPreselectInput, cmdExcMode, cmdExcNetworkMode, cmdExcTPSSource, + cmdExcEnableCellID, cmdExcTxAddress, cmdExcTxAutomatic, cmdExcInputSeamless, cmdExcInputPriority, + cmdExcInputCheckTimeForward, cmdExcInputCheckTimeSwitchback, cmdExcInputMuteOnFail, cmdExcInputManualPreseletionHP1, cmdExcInputManualPreseletionHP2, + cmdExcInputManualPreseletionLP1, cmdExcInputManualPreseletionLP2, cmdExcTPSManualBandwidth, cmdExcTPSManualFFTLength, cmdExcTPSManualGuardInterval, + cmdExcTPSManualConstellation, cmdExcTPSManualCellID, cmdExcTPSManualInterleaver, cmdExcTPSManualCoderateHP, cmdExcTPSManualCoderateLP, + cmdExcTPSManualTimeSlicingHP, cmdExcTPSManualTimeSlicingLP, cmdExcTPSManualFECHP, cmdExcTPSManualFECLP, cmdExcSFNStaticDelay, + cmdExcSFNDeviationTime, cmdExcFrequency, cmdExcReferenceSource, cmdExcMuteOnPPSFail, cmdExcMuteOnReferenceFail, + cmdExcTypeLossOfInput, cmdExcRfOutput, cmdExcRfOutputAttenuation, cmdExcRfOutputRfSlope, cmdExcRfOutputModulationSlope, + cmdExcRfIqAdjustTestsignal, cmdExcRfIqAdjustBiasCoarseI, cmdExcRfIqAdjustBiasCoarseQ, cmdExcRfIqAdjustBiasFineI, cmdExcRfIqAdjustBiasFineQ, + cmdExcRfIqAdjustGainI, cmdExcRfIqAdjustGainQ, cmdExcRfIqAdjustPhase, cmdExcInpAutoReadyAfterChangeOv, excInputChannelName, + excInputConnected, excInputSeamless, excInputPreselected, excInputActive, excInputMipFail, + excInputBandwidth, excInputFFTLength, excInputGuardInterval, excInputConstellation, excInputCellID, + excInputInterleaver, excInputCodeRate, excInputPacketLength, excInputMeasuredDatarate, excInputRequiredDatarate, + excInputMaximumDelay, exciterANumberOfEntries, exciterALogbookClear, excALogbookEntryNbr, excALogbookType, + excALogbookSlope, excALogbookMessage, excALogbookDateTime, cmdExcOcxoAdjust, cmdExcExpectInputReserve, + excStatusReqDataRateLP, excStatusReqDataRateHP, excStatusAmplifierControl, excStatusFailDelay, cmdExcFailDelayMode, + cmdExcInputFailDelayTime, cmdExcRefFailDelayTime } + STATUS current + DESCRIPTION + "Group for common exciter objects" + ::= { rsXx8000DvbTxGroups 23 } + + + groupExcAdditionalSx800 OBJECT-GROUP + OBJECTS { cmdExcRfOutputRegulation, cmdExcRfOutputManualRfLevel, cmdExcRfIqAdjustStart } + STATUS current + DESCRIPTION + "Additional exciter objects for the Sx800" + ::= { rsXx8000DvbTxGroups 24 } + + + groupExcAdditionalSLx OBJECT-GROUP + OBJECTS { cmdExcInput1Source, cmdExcInput2Source } + STATUS current + DESCRIPTION + "Additional exciter objects for the SLx and the Sx801" + ::= { rsXx8000DvbTxGroups 25 } + + + groupEventsExciter NOTIFICATION-GROUP + NOTIFICATIONS { txExcSummaryFault, txExcSummaryWarning, txExcInputNoConnectHP1, txExcInputNoConnectLP1, txExcInputNoConnectHP2, + txExcInputNoConnectLP2, txExcInputActiveHP1, txExcInputActiveLP1, txExcInputActiveHP2, txExcInputActiveLP2, + txExcOn, txExcRfOn, txExcNoInput, txExcRfLoop, txExcRfFail, + txExcSelfTest, txExcOutputOpen, txExcBoardTemperatureWarning, txExcFanWarning, txExcFanFault, + txExcFifoWarning, txExcTestSignal, txExcSFNDelay, txExcWrongDatarate, txExcMute, + txExcPPSFail, txExcReferenceFail, txExcMIPFail, txExcInputAutomaticSwitchReady, txExcRfOk, + txExcInputReseveMissing, txExcInputAutomaticChangedOver, txExcLocal } + STATUS current + DESCRIPTION + "events from the exciter" + ::= { rsXx8000DvbTxGroups 26 } + + + groupExciterStatus OBJECT-GROUP + OBJECTS { excStatusRfOutputAgcRegulation, excStatusRfIqAdjustAuto, excStatusRfIqAdjustLO1Frequency, excStatusSfnDelayProcessing, excStatusSfnDelayDynamic, + excStatusSfnDelayNetwork, excStatusSfnDelayTxOffset, excStatusSfnDelayMaximum, excStatusSfnDelayTotal, excStatusNominalPower + } + STATUS current + DESCRIPTION + "Group for exciterStatusTable." + ::= { rsXx8000DvbTxGroups 27 } + + + groupExciterPrecorrection OBJECT-GROUP + OBJECTS { excPrecLinCorrection, excPrecLinAutomaticADE, excPrecLinMaxAmplitudeRipple, excPrecLinMaxGroupDelayRipple, excPrecLinAmplitudeRipple, + excPrecLinGroupDelayRipple, excPrecLinInputLevel, excPrecLinAutomatic, excPrecNonlinCorrection, excPrecNonlinAutomaticADE, + excPrecNonlinThresholdShoulders, excPrecNonlinShoulderLeft, excPrecNonlinShoulderRight, excPrecNonlinInputLevel, excPrecNonlinAutomatic + } + STATUS current + DESCRIPTION + "Group for exciterPrecorrectionTable." + ::= { rsXx8000DvbTxGroups 28 } + + + groupSLx OBJECT-GROUP + OBJECTS { cmdExcTransmitterType, cmdExcTimeScheduler, excPrecUserState, excPrecFactoryState, excPrecRestoreCurrentSettings, + excPrecRestoreAllSettings, configTvStandardName, configFrequency, configPower, schedulerRowStatus, + schedulerEvent, schedulerDateTime, config2InputSource, config2Power, config2Frequency, + config2RxFrequency, config2TvStandardName, excStatusVSWR, cmdExcMuteCondition, schedulerTvStandard, + configRxFrequency, configInputSource } + STATUS current + DESCRIPTION + "object types that are relevant for SLx devices only" + ::= { rsXx8000DvbTxGroups 29 } + + + groupObjectsACU OBJECT-GROUP + OBJECTS { cmdExcRfWarningLimit, cmdExcRfFailLimit, cmdExcOutputPower, cmdExcMonitoringOutput } + STATUS current + DESCRIPTION + "objects from ACU" + ::= { rsXx8000DvbTxGroups 30 } + + + groupIndependentRacks OBJECT-GROUP + OBJECTS { rackReferenceVoltage, amplifiersPowerSupply, rackOnOff } + STATUS current + DESCRIPTION + "object types that are relevant for NX variants with independent racks only" + ::= { rsXx8000DvbTxGroups 31 } + + + groupObjectsRE OBJECT-GROUP + OBJECTS { summaryFaultExcA } + STATUS current + DESCRIPTION + "object types for the re-equip kit" + ::= { rsXx8000DvbTxGroups 32 } + + + groupEventsControlExciter NOTIFICATION-GROUP + NOTIFICATIONS { txNetCCUNoConnectionToExcB, txAutomaticExcReady, txAutomaticExcChanged, txAutomaticExcFault } + STATUS current + DESCRIPTION + "additional events in case Sx801 is control exciter" + ::= { rsXx8000DvbTxGroups 34 } + + + groupEventsAdditionalPowerSupply NOTIFICATION-GROUP + NOTIFICATIONS { txInternalPowerSupplyWarning, txExternalPowerSupplyWarning } + STATUS current + DESCRIPTION + "Events that are available only when additionalPowerSupply is true." + ::= { rsXx8000DvbTxGroups 35 } + + + groupObjsAdditionalPowerSupply OBJECT-GROUP + OBJECTS { internalPowerSupply, externalPowerSupply } + STATUS current + DESCRIPTION + "Objects that are available only when additionalPowerSupply is true." + ::= { rsXx8000DvbTxGroups 36 } + + + groupObjectsControlExciter OBJECT-GROUP + OBJECTS { cmdTxOperationModeReserve, cmdTxOpModeExcAutomatic, cmdTxDelayTimeExcAutomatic, summaryFaultExcB, exciterAutomaticReady, + exciterAutomaticChanged, exciterAutomaticFault, noConnectionExcB, activeExcB, cmdTxProgramExciterPrio, + cmdTxChangeOver, cmdTxSwitchPosition } + STATUS current + DESCRIPTION + "additional objects in case Sx801 is control exciter" + ::= { rsXx8000DvbTxGroups 37 } + + + groupObjectsSingleEnded OBJECT-GROUP + OBJECTS { cmdTxRfSwitch } + STATUS current + DESCRIPTION + "Group for objects in case of SingleTx or DualDrive." + ::= { rsXx8000DvbTxGroups 38 } + + + groupObjectsSx801Amplifier OBJECT-GROUP + OBJECTS { sx801AmpRfOut, sx801AmpRfIn, sx801AmpReflection, sx801AmpOn, sx801AmpAC, + sx801AmpCommunication, sx801AmpTransistor, sx801AmpDriver, sx801AmpTemperature, sx801AmpBlower, + sx801AmpRegulation, sx801AmpUpdate, sx801Supply1Temperature, sx801Supply2Temperature, sx801SupplyRTemperature, + sx801Supply1DC, sx801Supply2DC, sx801SupplyRDC, sx801AmpValueI1, sx801AmpValueI2, + sx801AmpValueI3, sx801AmpValueI4, sx801AmpValueIPre, sx801AmpValueIDrv1, sx801AmpValueIDrv2, + sx801AmpValuePowerOut, sx801AmpValueReflection, sx801AmpValueVRef, sx801AmpValueVReg, sx801AmpValueTemperature, + sx801AmpValueMonAtt, sx801AmpValueVAux1, sx801AmpValueVAux2, sx801Supply1ValuePwr, sx801Supply2ValuePwr, + sx801Supply1ValueDc, sx801Supply2ValueDc } + STATUS current + DESCRIPTION + "Objects for Sx801/SA801 amplifier status." + ::= { rsXx8000DvbTxGroups 39 } + + + groupObsoleted OBJECT-GROUP + OBJECTS { cmdTxParametersetReSave, cmdExcTimeForDailyPcrReset, cmdExcEnablePcrReset, excInputAlpha, cmdExcTPSManualAlpha, + rfProbeConfigurationLabel, cmdExcInputAutoSwitch } + STATUS obsolete + DESCRIPTION + "obsoleted or deprecated objects" + ::= { rsXx8000DvbTxGroups 99 } + + + groupEventsObsoleted NOTIFICATION-GROUP + NOTIFICATIONS { txParamSetSubDeviceDiffers, txNetCCUBoardTemperatureFault } + STATUS obsolete + DESCRIPTION + "obsoleted or deprecated events" + ::= { rsXx8000DvbTxGroups 100 } + + + rsXx8000DvbTxCompl OBJECT IDENTIFIER ::= { rsXx8000DvbTxConf 3 } + + + rsXx8000DVBSingleTxMP MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Reserve concept SingleTransmitter for Medium Power." + MODULE -- this module + MANDATORY-GROUPS { groupTxCommon, groupCommonMP, groupCommonNetCCU, groupExcCommon, groupEvents, + groupProductInfo, groupRfProbes, groupExciterStatus, groupExciterPrecorrection, groupEventsExciter, + groupEventsCommonNetCCU, groupObjectsSingleEnded, groupEventsCommonMP, groupEventsTxCommon } + GROUP groupIndependentRacks + DESCRIPTION + "for variant with independent racks only" + OBJECT cmdOstRefVoltageVision + MIN-ACCESS not-accessible + DESCRIPTION + "not accessible in variant with independent racks" + GROUP groupExcAdditionalSx800 + DESCRIPTION + "in case of Sx800 exciter" + GROUP groupEventsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + GROUP groupAmpMeasureValues + DESCRIPTION + "not for face-lift configuration" + GROUP groupEventsAmplifier + DESCRIPTION + "not for face-lift configuration" + GROUP groupObjsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + ::= { rsXx8000DvbTxCompl 1 } + + + rsXx8000DVBDualDriveMP MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Reserve concept DualDrive for Medium Power." + MODULE -- this module + MANDATORY-GROUPS { groupTxCommon, groupCommonMP, groupCommonNetCCU, groupExcCommon, groupDualDrive, + groupEvents, groupProductInfo, groupRfProbes, groupExciterStatus, groupExciterPrecorrection, + groupEventsExciter, groupEventsCommonNetCCU, groupEventsCommonMP, groupObjectsSingleEnded, groupEventsDualDrive, + groupEventsTxCommon } + GROUP groupIndependentRacks + DESCRIPTION + "for variant with independent racks only" + OBJECT cmdOstRefVoltageVision + MIN-ACCESS not-accessible + DESCRIPTION + "not accessible in variant with independent racks" + GROUP groupExcAdditionalSx800 + DESCRIPTION + "in case of Sx800 exciter" + GROUP groupEventsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + GROUP groupAmpMeasureValues + DESCRIPTION + "not for face-lift configuration" + GROUP groupEventsAmplifier + DESCRIPTION + "not for face-lift configuration" + GROUP groupObjsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + ::= { rsXx8000DvbTxCompl 2 } + + + rsXx8000DVBPowerReserveMP MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Reserve concept Active/Passive Reserve for Medium Power." + MODULE -- this module + MANDATORY-GROUPS { groupTxCommon, groupEvents, groupProductInfo, groupRfProbes, groupExciterStatus, + groupExcCommon, groupExciterPrecorrection, groupDualDrive, groupPowerReserve, groupCommonMP, + groupCommonNetCCU, groupOstBLogbook, groupEventsExciter, groupEventsCommonNetCCU, groupEventsCommonMP, + groupEventsPowerReserve, groupEventsDualDrive, groupEventsTxCommon } + GROUP groupIndependentRacks + DESCRIPTION + "for variant with independent racks only" + OBJECT cmdOstRefVoltageVision + MIN-ACCESS not-accessible + DESCRIPTION + "not accessible in variant with independent racks" + GROUP groupSumProbe + DESCRIPTION + "when sum probe exists only" + GROUP groupExcAdditionalSx800 + DESCRIPTION + "in case of Sx800 exciter" + GROUP groupEventsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + GROUP groupAmpMeasureValues + DESCRIPTION + "not for face-lift configuration" + GROUP groupEventsAmplifier + DESCRIPTION + "not for face-lift configuration" + GROUP groupObjsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + GROUP groupDummyLoadRF + DESCRIPTION + "only when a dummy load measure point exists" + ::= { rsXx8000DvbTxCompl 3 } + + + rsXx8000DVBSingleTxLP MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Reserve concept Low Power SingleTransmitter with NetCCU, meaning there is a NetCCU and a + LowPower exciter with one or more (to the exciter) connected amplifiers." + MODULE -- this module + MANDATORY-GROUPS { groupEvents, groupExciterStatus, groupExciterPrecorrection, groupExcAdditionalSLx, groupExcCommon, + groupCommonNetCCU, groupTxCommon, groupEventsExciter, groupEventsCommonNetCCU, groupEventsTxCommon + } + GROUP groupEventsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + GROUP groupObjsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + ::= { rsXx8000DvbTxCompl 5 } + + + rsXx8000DVBDualDriveLP MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Reserve concept DualDrive for Low Power." + MODULE -- this module + MANDATORY-GROUPS { groupEvents, groupExciterStatus, groupExciterPrecorrection, groupExcAdditionalSLx, groupExcCommon, + groupCommonNetCCU, groupDualDrive, groupTxCommon, groupEventsExciter, groupEventsCommonNetCCU, + groupEventsDualDrive, groupEventsTxCommon } + GROUP groupEventsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + GROUP groupObjsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + ::= { rsXx8000DvbTxCompl 6 } + + + rsXx8000DVBPowerReserveLP MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Reserve concept Active/Passive Reserve for Low Power." + MODULE -- this module + MANDATORY-GROUPS { groupEvents, groupExciterStatus, groupExciterPrecorrection, groupExcAdditionalSLx, groupExcCommon, + groupCommonNetCCU, groupPowerReserve, groupDualDrive, groupTxCommon, groupEventsExciter, + groupEventsCommonNetCCU, groupEventsPowerReserve, groupEventsDualDrive, groupEventsTxCommon } + GROUP groupEventsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + GROUP groupObjsAdditionalPowerSupply + DESCRIPTION + "only when additionalPowerSupply is true" + ::= { rsXx8000DvbTxCompl 7 } + + + rsXx8000DVBSingleTxLPNoNetCCU MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Reserve concept Low Power SingleTransmitter without NetCCU, meaning there is only a + LowPower exciter with one or more (to the exciter) connected amplifiers." + MODULE -- this module + MANDATORY-GROUPS { groupEvents, groupExciterStatus, groupExciterPrecorrection, groupExcAdditionalSLx, groupExcCommon, + groupTxCommon, groupEventsExciter, groupEventsTxCommon } + ::= { rsXx8000DvbTxCompl 9 } + + + rsXx8000DVBSLx MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "SLx device" + MODULE -- this module + MANDATORY-GROUPS { groupEvents, groupExciterStatus, groupExciterPrecorrection, groupSLx, groupObjectsACU, + groupExcCommon, groupTxCommon, groupEventsExciter, groupEventsTxCommon } + ::= { rsXx8000DvbTxCompl 10 } + + + rsXx8000DVBExciterOnly MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "DVB Exciter of 8000 series in a 7000 environment + or + Program Exciter in a Sx801 Backup Exciter environment." + MODULE -- this module + MANDATORY-GROUPS { groupProductInfo, groupExciterStatus, groupEvents, groupObjectsRE, groupObjectsSx801Amplifier, + groupExciterPrecorrection, groupExcCommon, groupEventsExciter } + GROUP groupSLx + DESCRIPTION + "in case of SLx device" + ::= { rsXx8000DvbTxCompl 11 } + + + rsXx8000DVBSx801ControlExciter MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Sx801 as control exciter" + MODULE -- this module + MANDATORY-GROUPS { groupTxCommon, groupExcCommon, groupEvents, groupExciterStatus, groupExciterPrecorrection, + groupSLx, groupObjectsACU, groupObjectsSx801Amplifier, groupEventsExciter, groupEventsTxCommon, + groupEventsControlExciter, groupObjectsControlExciter } + ::= { rsXx8000DvbTxCompl 12 } + + + + END |