diff options
Diffstat (limited to 'MIBS/raritan')
| -rw-r--r-- | MIBS/raritan/PDU-MIB | 5323 | ||||
| -rw-r--r-- | MIBS/raritan/PDU2-MIB | 12557 | ||||
| -rw-r--r-- | MIBS/raritan/RemoteKVMDevice-MIB | 1601 |
3 files changed, 19481 insertions, 0 deletions
diff --git a/MIBS/raritan/PDU-MIB b/MIBS/raritan/PDU-MIB new file mode 100644 index 0000000..5914330 --- /dev/null +++ b/MIBS/raritan/PDU-MIB @@ -0,0 +1,5323 @@ +PDU-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI
+ enterprises, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
+ InetAddress,InetAddressType FROM INET-ADDRESS-MIB
+ TEXTUAL-CONVENTION, DisplayString, MacAddress, DateAndTime, TruthValue FROM SNMPv2-TC;
+
+raritan MODULE-IDENTITY
+ LAST-UPDATED "201602220000Z" -- February 22,2016
+ ORGANIZATION "Raritan"
+ CONTACT-INFO "
+ Author: Raritan Americas, Inc.
+ postal: Raritan Americas, Inc.
+ 400 Cottontail Lane
+ Somerset, NJ 08873
+ email: tech@raritan.com
+ phone: +1 732 764 8886
+ "
+ DESCRIPTION "This mib describes the SNMP functions of the Dominion PX
+ Power Distribution Unit by Raritan Computer."
+
+
+ REVISION "201602220000Z" -- February 22,2016
+ DESCRIPTION "1) Added inletCurrentUnbalanceHysteresis to inletTable.
+
+ "
+
+
+ REVISION "201602030000Z" -- February 3,2016
+ DESCRIPTION "1) Added varbind sensorDescr to the following traps
+ managingenvironmentalSensor,
+ unmanagingenvironmentalSensor.
+
+ "
+
+
+ REVISION "201511020000Z" -- November 2,2015
+ DESCRIPTION "1) Added ipmiOverLAN to the info table.
+
+ "
+
+
+ REVISION "201510260000Z" -- October 26,2015
+ DESCRIPTION "1) Added Comment above primaryNTPServerAddressType
+
+ "
+
+
+ REVISION "201510160000Z" -- October 16,2015
+ DESCRIPTION "1) Modified DESCRIPTION clauses of the following traps.
+ ipmiOverLANEnabled,
+ ipmiOverLANDisabled
+
+ 2) Added the following traps to the NOTIFICATION-GROUP trapsGroup
+ ipmiOverLANEnabled,
+ ipmiOverLANDisabled
+
+ "
+
+ REVISION "201510020000Z" -- October 2,2015
+ DESCRIPTION "1) Modified DESCRIPTION clause of thresholdAlarm trap
+
+
+ "
+
+
+
+ REVISION "201506190000Z" -- June 19,2015
+ DESCRIPTION "1) Modified DESCRIPTION clauses of
+ dataLogAvgExternalSensorValue,
+ dataLogMaxExternalSensorValue,
+ dataLogAvgExternalSensorValue
+
+ 2) Modified DESCRIPTION CLAUSE of reorderexternalSensorTableEntries
+
+ "
+
+
+ REVISION "201503110000Z" -- March 11,2015
+ DESCRIPTION "1) Added the following under info.
+ thresholdValue,
+ sensorValue
+
+ 2) Added thresholdValue and sensorValue to the following traps
+ thresholdAlarm
+
+ "
+
+
+ REVISION "201404030000Z" -- April 3,2014
+ DESCRIPTION "1) Modified the DESCRIPTION of the following.
+ inletActiveEnergy
+ inletPoleMaxCurrent
+ inletPoleActivePower
+ inletPoleApparentPower
+ inletPolePowerFactor
+ inletPoleActiveEnergy
+ neutralCurrentUpperWarning
+ neutralCurrentUppeCritical
+ dataLogAvgInletPoleActivePower
+ dataLogMaxInletPoleActivePower
+ dataLogMinInletPoleActivePower
+ dataLogAvgInletPoleApparentPower
+ dataLogMaxInletPoleApparentPower
+ dataLogMinInletPoleApparentPower
+ dataLogAvgInletPoleActiveEnergy
+ dataLogMaxInletPoleActiveEnergy
+ dataLogMinInletPoleActiveEnergy
+ currentUnbalance
+ 2) Added the following traps
+ managingenvironmentalSensor,
+ unmanagingenvironmentalSensor
+ "
+
+
+ REVISION "201203220000Z" -- March 22,2012
+ DESCRIPTION "1) Added dataLogExternalSensorChanged to dataLogExternalSensorTable.
+
+ "
+
+ REVISION "201203150000Z" -- March 15,2012
+ DESCRIPTION "1) Added support for NTP servers.
+ Added the following objects under info
+ synchronizeWithNTPServer, useDHCPProvidedNTPServer,
+ primaryNTPServerAddressType, primaryNTPServerAddress,
+ secondaryNTPServerAddressType, secondaryNTPServerAddress,
+ daylightSavingsTime
+ "
+
+
+ REVISION "201203140000Z" -- March 14,2012
+ DESCRIPTION "1) Added support for external sensors in the data log
+ Added dataLogExternalSensorTable
+ "
+
+ REVISION "201111300000Z" -- Novemebr 30, 2011
+ DESCRIPTION "1) Modified DESCRIPTION of configureAlerts to note that Policy Name is case-sensitive
+ "
+
+
+ REVISION "201111070000Z" -- November 7, 2011
+ DESCRIPTION "1) Added configureAlerts under info
+ Added SensorClassEnumeration, EventTypeEnumeration, EventDirectionEnumeration
+ "
+
+ REVISION "201110060000Z" -- October 6, 2011
+ DESCRIPTION "1) Added fipsMode under info
+ 2) Added EnabledDisabledEnumeration
+ 3) Added fipsModeEnabled and fipsModeDisabled traps
+ "
+
+ REVISION "201105170000Z" -- May 17, 2011
+ DESCRIPTION "1) Added altitude under info
+ "
+
+ REVISION "201105110000Z" -- May 11, 2011
+ DESCRIPTION "1) Modified the DESCRIPTION clause of dataLoggingInterval and measurementsPerLogEntry
+ 2) Added reorderExternaSensorTableEntries to specify the order of the entries in externalSensorTable
+ 3) Added voltageMeasurementFailure trap
+ "
+
+ REVISION "201104180000Z" -- April 18, 2011
+ DESCRIPTION "1) Added dataLogAvgActivePower,dataLogMaxActivePower,dataLogMinActivePower,
+ dataLogAvgApparentPower,dataLogMaxApparentPower, dataLogMinApparentPower
+ to DataLogEntryStruct
+
+ 2) Added dataLogAvgOutletCurrent,dataLogMaxOutletCurrent,dataLogMinOutletCurrent,
+ dataLogAvgOutletVoltage,dataLogMaxOutletVoltage,dataLogMinOutletVoltage,
+ dataLogAvgOutletPowerFactor,dataLogMaxOutletPowerFactor,dataLogMinOutletPowerFactor,
+ dataLogAvgOutletWattHours,dataLogMaxOutletWattHours,dataLogMinOutletWattHours
+ to DataLogOutletEntryStruct
+
+ 3) Added dataLogAvgCircuitBreakerCurrent,dataLogMaxCircuitBreakerCurrent,dataLogMinCircuitBreakerCurrent
+ to DataLogCircuitBreakerEntryStruct
+
+ 4) Added dataLogAvgInletCurrentUnbalance,dataLogMaxInletCurrentUnbalance,dataLogMinInletCurrentUnbalance,
+ dataLogAvgInletActivePower,dataLogMaxInletActivePower,dataLogMinInletActivePower,
+ dataLogAvgInletApparentPower,dataLogMaxInletApparentPower,dataLogMinInletApparentPower,
+ dataLogAvgInletActiveEnergy,dataLogMaxInletActiveEnergy,dataLogMinInletActiveEnergy,
+ to DataLogInletEntryStruct
+
+ 5) Added dataLogAvgInletPoleCurrent,dataLogMaxInletPoleCurrent,dataLogMinInletPoleCurrent,
+ dataLogAvgInletPoleVoltage,dataLogMaxInletPoleVoltage,dataLogMinInletPoleVoltage,
+ dataLogAvgInletPoleActivePower,dataLogMaxInletPoleActivePower,dataLogMinInletPoleActivePower,
+ dataLogAvgInletPoleApparentPower,dataLogMaxInletPoleApparentPower,dataLogMinInletPoleApparentPower,
+ dataLogAvgInletPoleActiveEnergy,dataLogMaxInletPoleActiveEnergy,dataLogMinInletPoleActiveEnergy
+ to DataLogInletPoleEntryStruct
+
+ 6) Added measurementsPerLogEntry under info.
+
+ 7) Deprecated dataLogActivePower,dataLogApparentPower,dataLogOutletCurrent,
+ dataLogOutletVoltage,dataLogOutletPowerFactor, dataLogOutletOnTime,
+ dataLogCircuitBreakerCurrent,dataLogOutletWattHours,dataLogInletPoleCurrent,
+ dataLogInletPoleVoltage,dataLogInletCurrentUnbalance,dataLogInletActivePower,
+ dataLogInletApparentPower,dataLogInletActiveEnergy
+
+ 8) Deprecated dataLoggingInterval
+
+ "
+
+ REVISION "201102140000Z" -- February 14, 2011
+ DESCRIPTION "1) Added PowerCIMStatusEnumeration and powerCIMStatus
+ "
+
+ REVISION "201101240000Z" -- January 24, 2011
+ DESCRIPTION "1) Added lastUpgradeStatus,lastUpgradeTimestamp, lastUpgradeErrorDescription
+ "
+
+ REVISION "201011300000Z" -- November 30, 2010
+ DESCRIPTION "1) Added externalSensorNumber,externalSensorType, externalSensorName, externalSensorChannelNumber, externalBinarySensorSubtype,
+ externalSensorSerialNumber to environmentalSensorsConnectivityRestored trap
+ 2) Added externalSensorNumber,externalSensorType, externalSensorName, externalSensorChannelNumber, externalBinarySensorSubtype,
+ externalSensorSerialNumber to environmentalSensorsConnectivityLost trap
+ 3) Added externalSensorSerialNumber to externalOnOffSensorStateChange
+ 4) Added sensorIdentificationString to thresholdAlarm trap
+ 5) Added none to TypeOfSensorEnumeration
+ "
+
+
+ REVISION "201011040000Z" -- November 4, 2010
+ DESCRIPTION "1) Added environmentalSensorsConnectivityRestored trap
+ 2) Changed MAX-ACCESS of inlineMeter to read-only
+ "
+
+ REVISION "201007210000Z" -- July 21, 2010
+ DESCRIPTION "1) Renamed externalBinarySensorStateChange trap to externalOnOffSensorStateChange
+ "
+
+ REVISION "201007190000Z" -- July 19, 2010
+ DESCRIPTION "1) Added externalBinarySensorStateChange trap
+ 2) Added contact to TypeOfSensorEnumeration"
+
+ REVISION "201007150000Z" -- July 15, 2010
+ DESCRIPTION "1) Added binary to TypeOfSensorEnumeration
+ 2) Added externalBinarySensorSubtype to ExternalSensorEntryStruct"
+
+ REVISION "201007130000Z" -- July 13, 2010
+ DESCRIPTION "Added outletCurrentHysteresis
+ circuitBreakerCurrentHysteresis
+ unitOrLineVoltageHysteresis,
+ unitOrLineCurrentHysteresis,
+ unitTempHysteresis,
+ currentUnbalanceHysteresis
+ inletCurrentHysteresis,
+ inletVoltageHysteresis,
+ externalSensorHysteresis"
+
+ REVISION "201006290000Z" -- June 29, 2010
+ DESCRIPTION "Added externalSensorChannelNumber to externalSensorTable"
+
+ REVISION "201006070000Z" -- June 7, 2010
+ DESCRIPTION "Added Alarmed to StateOfSensorEnumeration"
+
+ REVISION "201005270000Z" -- May 27, 2010
+ DESCRIPTION "Moved the externalSensorTable from under board to under pdu"
+
+ REVISION "201005200000Z" -- May 20, 2010
+ DESCRIPTION "In the externalSensorTable, changed SYNTAX of externalSensorLowerCriticalThreshold, externalSensorLowerWarningThreshold,externalSensorUpperCriticalThreshold,
+ externalSensorUpperWarningThreshold to Integer32"
+
+ REVISION "201005170000Z" -- May 17, 2010
+ DESCRIPTION "Added externalSensorTable for representing all types of external sensors
+ Deprecated tempSensorTable and humiditySensorTable"
+
+ REVISION "200906090000Z" -- June 9, 2009
+ DESCRIPTION "Added support for multiple inlets/inline meters"
+
+
+ REVISION "200904200000Z" -- April 20, 2009
+ DESCRIPTION "For PX 1.3.5;Deprecated SensorStateEnumeration & SensorTypeEnumeration"
+
+ REVISION "200902130000Z" -- February 13, 2009
+ DESCRIPTION "For PX 1.3.5;Added support for environmental sensor coordinates:
+ added tempXCoordinate,tempYCoordinate,tempZCoordinate to tempSensorTable
+ added humidityXCoordinate,humidityYCoordinate,humidityZCoordinate to humiditySensorTable
+ added externalSensorsZCoordinateUnits under info "
+
+ REVISION "200902120000Z" -- February 12, 2009
+ DESCRIPTION "For PX 1.3.5;Added support for current unbalance: enabling/disabling, unbalance value and thresholds
+ currentUnbalanceSupport,currentUnbalance,currentUnbalanceUpperWarning,currentUnbalanceUpper"
+
+
+ REVISION "200812010000Z" -- December 1, 2008
+ DESCRIPTION "For PX 1.3;Added outletEnergySupport to indicate whether outlet energy is supported"
+
+ REVISION "200810240000Z" -- October 24, 2008
+ DESCRIPTION "For PX 1.3;Added Watt-Hours for outlets, lower current warning & lower critical thresholds for outlets"
+
+
+ REVISION "200809250000Z" -- September 25, 2008
+ DESCRIPTION "Added trap for environmental sensors disconnected"
+
+ REVISION "200809050000Z" -- September 5, 2008
+ DESCRIPTION "Add support for data Log ( line, circuit breaker,outlet ) Retrieval"
+
+
+
+ REVISION "200806050000Z" -- June 5, 2008
+ DESCRIPTION "PX 1.2 MIB supports 3-phase PDUs."
+
+
+ REVISION "200711280000Z" -- November 28, 2007
+ DESCRIPTION "Modfied MIB in effort to better support HP OpenView
+ and other SNMP managers."
+
+ REVISION "200706200000Z" -- June 20, 2007
+ DESCRIPTION "Updated version for remote access to pdu."
+ ::= { enterprises 13742 }
+
+pdu OBJECT IDENTIFIER ::= { raritan 4 }
+
+traps OBJECT IDENTIFIER ::= { pdu 0 }
+board OBJECT IDENTIFIER ::= { pdu 1 }
+environmental OBJECT IDENTIFIER ::= { pdu 2 }
+externalSensors OBJECT IDENTIFIER ::= { pdu 3 }
+conformance OBJECT IDENTIFIER ::= { pdu 9 }
+
+info OBJECT IDENTIFIER ::= { board 1 }
+outlets OBJECT IDENTIFIER ::= { board 2 }
+unit OBJECT IDENTIFIER ::= { board 3 }
+lineCurrents OBJECT IDENTIFIER ::= { board 4 }
+circuitBreaker OBJECT IDENTIFIER ::= { board 5 }
+lineVoltages OBJECT IDENTIFIER ::= { board 6 }
+dataLog OBJECT IDENTIFIER ::= { board 7 }
+inlets OBJECT IDENTIFIER ::= { board 20 }
+inletPole OBJECT IDENTIFIER ::= { board 21 }
+dataLogOutlet OBJECT IDENTIFIER ::= { board 10 }
+dataLogCircuitBreaker OBJECT IDENTIFIER ::= { board 15 }
+dataLogInputLine OBJECT IDENTIFIER ::= { board 14 }
+dataLogInlet OBJECT IDENTIFIER ::= { board 12 }
+dataLogInletPole OBJECT IDENTIFIER ::= { board 13 }
+dataLogExternalSensor OBJECT IDENTIFIER ::= { board 16 }
+
+
+unitReadings OBJECT IDENTIFIER ::= { unit 1 }
+
+compliances OBJECT IDENTIFIER ::= { conformance 1 }
+groups OBJECT IDENTIFIER ::= { conformance 2 }
+
+-- Conformance Information
+-- compliance statements
+
+compliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The requirements for conformance to the PDU-MIB. This is deprecated and the new compliance
+ ComplianceRev1 has been added"
+ MODULE -- this module
+
+ GROUP infoGroup
+ DESCRIPTION
+ "The info group."
+
+ GROUP outletsGroup
+ DESCRIPTION
+ "The outlets group."
+
+ GROUP unitSensorsGroup
+ DESCRIPTION
+ "The unit sensor readings association group."
+
+ GROUP externalTemperatureGroup
+ DESCRIPTION
+ "The external temperature sensor association group."
+
+ GROUP externalHumidityGroup
+ DESCRIPTION
+ "The external humidity sensor association group."
+
+ GROUP trapsGroup
+ DESCRIPTION
+ "The traps group."
+ ::= { compliances 1 }
+
+complianceRev1 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The requirements for conformance to the PDU-MIB. This is deprecated and the new compliance
+ ComplianceRev2 has been added"
+ MODULE -- this module
+
+ GROUP infoGroup
+ DESCRIPTION
+ "The info group."
+
+ GROUP outletsGroup
+ DESCRIPTION
+ "The outlets group."
+
+ GROUP unitSensorsGroupRev
+ DESCRIPTION
+ "The unit sensor readings association group."
+
+ GROUP externalTemperatureGroup
+ DESCRIPTION
+ "The external temperature sensor association group."
+
+ GROUP externalHumidityGroup
+ DESCRIPTION
+ "The external humidity sensor association group."
+
+ GROUP trapsGroup
+ DESCRIPTION
+ "The traps group."
+
+ GROUP lineCurrentGroup
+ DESCRIPTION
+ "The line current group."
+
+ GROUP circuitBreakerGroup
+ DESCRIPTION
+ "The Circuit Breaker group."
+
+ GROUP lineVoltageGroup
+ DESCRIPTION
+ "The line Voltage group."
+
+ GROUP dataLogGroup
+ DESCRIPTION
+ "The pdu Data group."
+ ::= { compliances 2 }
+
+complianceRev2 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The requirements for conformance to the PDU-MIB. This is deprecated and the new compliance
+ ComplianceRev3 has been added"
+ MODULE -- this module
+
+ GROUP infoGroup
+ DESCRIPTION
+ "The info group."
+
+
+ GROUP outletsGroup
+ DESCRIPTION
+ "The outlets group."
+
+ GROUP unitSensorsGroupRev
+ DESCRIPTION
+ "The unit sensor readings association group."
+
+ GROUP externalTemperatureGroup
+ DESCRIPTION
+ "The external temperature sensor association group."
+
+ GROUP externalHumidityGroup
+ DESCRIPTION
+ "The external humidity sensor association group."
+
+ GROUP trapsGroup
+ DESCRIPTION
+ "The traps group."
+
+ GROUP circuitBreakerGroup
+ DESCRIPTION
+ "The Circuit Breaker group."
+
+ GROUP dataLogGroup
+ DESCRIPTION
+ "The pdu Data group."
+ ::= { compliances 3 }
+
+
+complianceRev3 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The requirements for conformance to the PDU-MIB.This is deprecated and the new compliance
+ ComplianceRev4 has been added"
+ MODULE -- this module
+
+ GROUP infoGroup
+ DESCRIPTION
+ "The info group."
+
+ GROUP inletsGroup
+ DESCRIPTION
+ "The inlets group."
+
+ GROUP outletsGroup
+ DESCRIPTION
+ "The outlets group."
+
+ GROUP unitSensorsGroupRev2
+ DESCRIPTION
+ "The unit sensor readings association group."
+
+ GROUP externalTemperatureGroup
+ DESCRIPTION
+ "The external temperature sensor association group."
+
+ GROUP externalHumidityGroup
+ DESCRIPTION
+ "The external humidity sensor association group."
+
+ GROUP trapsGroup
+ DESCRIPTION
+ "The traps group."
+
+ GROUP inletPoleGroup
+ DESCRIPTION
+ "The line current group."
+
+ GROUP circuitBreakerGroup
+ DESCRIPTION
+ "The Circuit Breaker group."
+
+ GROUP dataLogGroupRev
+ DESCRIPTION
+ "The pdu Data group."
+ ::= { compliances 4 }
+
+complianceRev4 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The requirements for conformance to the PDU-MIB. This is deprecated and the new compliance
+ ComplianceRev5 has been added"
+ MODULE -- this module
+
+ GROUP infoGroup
+ DESCRIPTION
+ "The info group."
+
+ GROUP inletsGroup
+ DESCRIPTION
+ "The inlets group."
+
+ GROUP outletsGroup
+ DESCRIPTION
+ "The outlets group."
+
+ GROUP unitSensorsGroupRev2
+ DESCRIPTION
+ "The unit sensor readings association group."
+
+ GROUP externalSensorsGroup
+ DESCRIPTION
+ "The external sesnors sensor association group."
+
+ GROUP trapsGroup
+ DESCRIPTION
+ "The traps group."
+
+ GROUP inletPoleGroup
+ DESCRIPTION
+ "The line current group."
+
+ GROUP circuitBreakerGroup
+ DESCRIPTION
+ "The Circuit Breaker group."
+
+ GROUP dataLogGroupRev
+ DESCRIPTION
+ "The pdu Data group."
+ ::= { compliances 5 }
+
+
+complianceRev5 MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The requirements for conformance to the PDU-MIB."
+ MODULE -- this module
+
+ GROUP infoGroupRev2
+ DESCRIPTION
+ "The info group."
+
+ GROUP inletsGroup
+ DESCRIPTION
+ "The inlets group."
+
+ GROUP outletsGroup
+ DESCRIPTION
+ "The outlets group."
+
+ GROUP unitSensorsGroupRev2
+ DESCRIPTION
+ "The unit sensor readings association group."
+
+ GROUP externalSensorsGroup
+ DESCRIPTION
+ "The external sesnors sensor association group."
+
+ GROUP trapsGroup
+ DESCRIPTION
+ "The traps group."
+
+ GROUP inletPoleGroup
+ DESCRIPTION
+ "The line current group."
+
+ GROUP circuitBreakerGroup
+ DESCRIPTION
+ "The Circuit Breaker group."
+
+ GROUP dataLogGroupRev2
+ DESCRIPTION
+ "The pdu Data group."
+ ::= { compliances 6 }
+
+-- units of conformance
+
+infoGroup OBJECT-GROUP
+ OBJECTS {
+ dataLoggingInterval
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing basic information
+ about the pdu."
+ ::= { groups 1 }
+
+infoGroupRev2 OBJECT-GROUP
+ OBJECTS { firmwareVersion,
+ serialNumber,
+ ipAddress,
+ netmask,
+ gateway,
+ mac,
+ hardwareRev,
+ userName,
+ objectName,
+ objectInstance,
+ targetUser,
+ groupName,
+ imageVersion,
+ sensorDescr,
+ thresholdDescr,
+ thresholdSeverity,
+ thresholdEventType,
+ status,
+ slaveIpAddress,
+ inputCurrentRating,
+ ratedVoltage,
+ ratedPower,
+ outletSwitching,
+ dataLogging,
+ dataCollectionInterval,
+ outletEnergySupport,
+ currentUnbalanceSupport,
+ externalSensorsZCoordinateUnits,
+ inlineMeter,
+ oldSensorState,
+ externalSensorNumber,
+ sensorIdentificationString,
+ lastUpgradeStatus,
+ lastUpgradeTimestamp,
+ lastUpgradeErrorDescription,
+ powerCIMStatus,
+ measurementsPerLogEntry,
+ psocNumber,
+ altitude,
+ configureAlerts,
+ fipsMode,
+ synchronizeWithNTPServer,
+ useDHCPProvidedNTPServer,
+ primaryNTPServerAddressType,
+ primaryNTPServerAddress,
+ secondaryNTPServerAddressType,
+ secondaryNTPServerAddress,
+ daylightSavingsTime,
+ thresholdValue,
+ sensorValue,
+ ipmiOverLAN
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing basic information
+ about the pdu."
+ ::= { groups 22 }
+
+
+outletsGroup OBJECT-GROUP
+ OBJECTS { outletCount,
+ outletLabel,
+ outletCurrentRating,
+ outletOperationalState,
+ outletCurrent,
+ outletMaxCurrent,
+ outletVoltage,
+ outletActivePower,
+ outletApparentPower,
+ outletPowerFactor,
+ outletCurrentUpperWarning,
+ outletCurrentUpperCritical,
+ outletCurrentLowerWarning,
+ outletCurrentLowerCritical,
+ outletCurrentHysteresis,
+ outletWattHours
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing basic information
+ about the outlets, including sensor readings."
+ ::= { groups 2 }
+
+unitSensorsGroup OBJECT-GROUP
+ OBJECTS {
+ unitCurrent,
+ unitVoltage,
+ unitActivePower,
+ unitApparentPower,
+ unitCpuTemp,
+ unitVoltageLowerWarning,
+ unitVoltageUpperWarning,
+ unitVoltageLowerCritical,
+ unitVoltageUpperCritical,
+ unitCurrentUpperWarning,
+ unitCurrentUpperCritical,
+ unitTempLowerWarning,
+ unitTempUpperWarning,
+ unitTempLowerCritical,
+ unitTempUpperCritical }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing unit level sensor readings.This group is deprecated in favor
+ of unitSensorsGroupRev"
+ ::= { groups 4 }
+
+
+
+externalTemperatureGroup OBJECT-GROUP
+ OBJECTS { tempSensorCount,
+ tempSensorLabel,
+ temperature,
+ tempLowerWarning,
+ tempUpperWarning,
+ tempLowerCritical,
+ tempUpperCritical,
+ tempXCoordinate,
+ tempYCoordinate,
+ tempZCoordinate
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing external temperature sensor readings and
+ threshold settings. This group is deprecated in favor of the externalSensorsGroup"
+ ::= { groups 6 }
+
+externalHumidityGroup OBJECT-GROUP
+ OBJECTS { humiditySensorCount,
+ humiditySensorLabel,
+ humidity,
+ humidityLowerWarning,
+ humidityUpperWarning,
+ humidityLowerCritical,
+ humidityUpperCritical,
+ humidityXCoordinate,
+ humidityYCoordinate,
+ humidityZCoordinate }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing external humidity sensor readings and threshold settings.
+ This group is deprecated in favor of the externalSensorsGroup"
+ ::= { groups 7 }
+
+trapsGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { rebootStarted,
+ rebootCompleted,
+ userLogin,
+ userLogout,
+ userAuthenticationFailure,
+ userSessionTimeout,
+ userAdded,
+ userModified,
+ userDeleted,
+ groupAdded,
+ groupModified,
+ groupDeleted,
+ deviceUpdateStarted,
+ userBlocked,
+ powerControl,
+ userPasswordChanged,
+ passwordSettingsChanged,
+ firmwareFileDiscarded,
+ firmwareValidationFailed,
+ securityViolation,
+ logFileCleared,
+ thresholdAlarm,
+ outletGroupingConnectivityLost,
+ circuitBreakerTripped,
+ circuitBreakerRecovered,
+ bulkConfigurationSaved,
+ bulkConfigurationCopied,
+ environmentalSensorsConnectivityLost,
+ externalOnOffSensorStateChange,
+ environmentalSensorsConnectivityRestored,
+ voltageMeasurementError,
+ fipsModeEnabled,
+ fipsModeDisabled,
+ managingenvironmentalSensor,
+ unmanagingenvironmentalSensor,
+ ipmiOverLANEnabled,
+ ipmiOverLANDisabled
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of traps."
+ ::= { groups 9 }
+
+lineCurrentGroup OBJECT-GROUP
+ OBJECTS { lineCurrentCount,
+ lineCurrentLabel,
+ lineCurrent}
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects describing the line inputs.
+ This group is deprecated in favor of inletPoleGroup"
+ ::= { groups 10 }
+
+
+circuitBreakerGroup OBJECT-GROUP
+ OBJECTS { circuitBreakerCount,
+ circuitBreakerLabel,
+ circuitBreakerCurrentRating,
+ circuitBreakerState,
+ circuitBreakerCurrent,
+ circuitBreakerCurrentUpperWarning,
+ circuitBreakerCurrentUpperCritical,
+ circuitBreakerCurrentHysteresis }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects describing the circuit breakers."
+ ::= { groups 11 }
+
+lineVoltageGroup OBJECT-GROUP
+ OBJECTS { lineVoltageCount,
+ lineVoltageLabel,
+ lineVoltage}
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects describing the line voltages.
+ This group is deprecated in favor of inletPoleGroup"
+ ::= { groups 12 }
+
+unitSensorsGroupRev OBJECT-GROUP
+ OBJECTS {
+ unitActivePower,
+ unitApparentPower,
+ unitCpuTemp,
+ unitOrLineVoltageLowerWarning,
+ unitOrLineVoltageUpperWarning,
+ unitOrLineVoltageLowerCritical,
+ unitOrLineVoltageUpperCritical,
+ unitOrLineCurrentUpperWarning,
+ unitOrLineCurrentUpperCritical,
+ neutralCurrentUpperWarning,
+ neutralCurrentUpperCritical,
+ unitTempLowerWarning,
+ unitTempUpperWarning,
+ unitTempLowerCritical,
+ unitTempUpperCritical,
+ currentUnbalance,
+ currentUnbalanceUpperWarning,
+ currentUnbalanceUpperCritical}
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing unit level sensor readings.This group is deprecated
+ in favor of unitSensorsGroupRev2"
+ ::= { groups 13 }
+
+unitSensorsGroupRev2 OBJECT-GROUP
+ OBJECTS {
+ unitCpuTemp,
+ unitOrLineVoltageLowerWarning,
+ unitOrLineVoltageUpperWarning,
+ unitOrLineVoltageLowerCritical,
+ unitOrLineVoltageUpperCritical,
+ unitOrLineCurrentUpperWarning,
+ unitOrLineCurrentUpperCritical,
+ neutralCurrentUpperWarning,
+ neutralCurrentUpperCritical,
+ unitTempLowerWarning,
+ unitTempUpperWarning,
+ unitTempLowerCritical,
+ unitTempUpperCritical,
+ currentUnbalance,
+ currentUnbalanceUpperWarning,
+ currentUnbalanceUpperCritical,
+ unitOrLineVoltageHysteresis,
+ unitOrLineCurrentHysteresis,
+ unitTempHysteresis,
+ currentUnbalanceHysteresis}
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing unit level sensor readings."
+ ::= { groups 18 }
+
+dataLogGroup OBJECT-GROUP
+ OBJECTS { dataLogCount,
+ dataLogLatestIndex,
+ dataLogTimeStamp,
+ dataLogActivePower,
+ dataLogApparentPower,
+ dataLogOutletCurrent,
+ dataLogOutletVoltage,
+ dataLogOutletPowerFactor,
+ dataLogOutletOnTime,
+ dataLogCircuitBreakerCurrent,
+ dataLogInputLineCurrent,
+ dataLogInputLineVoltage,
+ dataLogOutletWattHours
+
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects describing the pdu data.
+ This group is being deprecated in favor of dataLogGroupRev "
+ ::= { groups 14 }
+
+dataLogGroupRev OBJECT-GROUP
+ OBJECTS { dataLogCount,
+ dataLogLatestIndex,
+ dataLogTimeStamp,
+ dataLogActivePower,
+ dataLogApparentPower,
+ dataLogOutletCurrent,
+ dataLogOutletVoltage,
+ dataLogOutletPowerFactor,
+ dataLogOutletOnTime,
+ dataLogCircuitBreakerCurrent,
+ dataLogOutletWattHours,
+ dataLogInletPoleCurrent,
+ dataLogInletPoleVoltage,
+ dataLogInletCurrentUnbalance,
+ dataLogInletActivePower,
+ dataLogInletApparentPower,
+ dataLogInletActiveEnergy
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects describing the pdu data.
+ This group is being deprecated in favor of dataLogGroupRev2"
+ ::= { groups 17 }
+
+dataLogGroupRev2 OBJECT-GROUP
+ OBJECTS { dataLogCount,
+ dataLogLatestIndex,
+ dataLogTimeStamp,
+ dataLogAvgActivePower,
+ dataLogMaxActivePower,
+ dataLogMinActivePower,
+ dataLogAvgApparentPower,
+ dataLogMaxApparentPower,
+ dataLogMinApparentPower,
+ dataLogAvgOutletCurrent,
+ dataLogMaxOutletCurrent,
+ dataLogMinOutletCurrent,
+ dataLogAvgOutletVoltage,
+ dataLogMaxOutletVoltage,
+ dataLogMinOutletVoltage,
+ dataLogAvgOutletPowerFactor,
+ dataLogMaxOutletPowerFactor,
+ dataLogMinOutletPowerFactor,
+ dataLogAvgOutletWattHours,
+ dataLogMaxOutletWattHours,
+ dataLogMinOutletWattHours,
+ dataLogAvgCircuitBreakerCurrent,
+ dataLogMaxCircuitBreakerCurrent,
+ dataLogMinCircuitBreakerCurrent,
+ dataLogAvgInletCurrentUnbalance,
+ dataLogMaxInletCurrentUnbalance,
+ dataLogMinInletCurrentUnbalance,
+ dataLogAvgInletActivePower,
+ dataLogMaxInletActivePower,
+ dataLogMinInletActivePower,
+ dataLogAvgInletApparentPower,
+ dataLogMaxInletApparentPower,
+ dataLogMinInletApparentPower,
+ dataLogAvgInletActiveEnergy,
+ dataLogMaxInletActiveEnergy,
+ dataLogMinInletActiveEnergy,
+ dataLogAvgInletPoleCurrent,
+ dataLogMaxInletPoleCurrent,
+ dataLogMinInletPoleCurrent,
+ dataLogAvgInletPoleVoltage,
+ dataLogMaxInletPoleVoltage,
+ dataLogMinInletPoleVoltage,
+ dataLogAvgInletPoleActivePower,
+ dataLogMaxInletPoleActivePower,
+ dataLogMinInletPoleActivePower,
+ dataLogAvgInletPoleApparentPower,
+ dataLogMaxInletPoleApparentPower,
+ dataLogMinInletPoleApparentPower,
+ dataLogAvgInletPoleActiveEnergy,
+ dataLogMaxInletPoleActiveEnergy,
+ dataLogMinInletPoleActiveEnergy,
+ dataLogExternalSensorChanged,
+ dataLogExternalSensorState,
+ dataLogAvgExternalSensorValue,
+ dataLogMaxExternalSensorValue,
+ dataLogMinExternalSensorValue
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects describing the pdu data."
+ ::= { groups 21 }
+
+
+inletPoleGroup OBJECT-GROUP
+ OBJECTS { inletPoleCount,
+ inletPoleLabel,
+ inletPoleCurrent,
+ inletPoleVoltage,
+ inletPoleMaxCurrent,
+ inletPoleActivePower,
+ inletPoleApparentPower,
+ inletPolePowerFactor,
+ inletPoleActiveEnergy
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects describing the inlet poles."
+ ::= { groups 15 }
+
+inletsGroup OBJECT-GROUP
+ OBJECTS { inletCount,
+ inletCurrentRating,
+ inletCurrentUnbalanceUpperCritical,
+ inletCurrentUnbalanceUpperWarning,
+ inletCurrentUnbalance,
+ inletActivePower,
+ inletApparentPower,
+ inletPoleCount,
+ inletCurrent,
+ inletVoltage,
+ inletPowerFactor,
+ inletActiveEnergy,
+ inletCurrentUpperWarning,
+ inletCurrentUpperCritical,
+ inletCurrentLowerWarning,
+ inletCurrentLowerCritical,
+ inletVoltageUpperWarning,
+ inletVoltageUpperCritical,
+ inletVoltageLowerWarning,
+ inletVoltageLowerCritical,
+ inletCurrentHysteresis,
+ inletVoltageHysteresis,
+ inletCurrentUnbalanceHysteresis
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing basic information
+ about the inlets, including sensor readings."
+ ::= { groups 16 }
+
+externalSensorsGroup OBJECT-GROUP
+ OBJECTS { externalSensorCount,
+ externalSensorType,
+ externalSensorSerialNumber,
+ externalSensorName,
+ externalSensorChannelNumber,
+ externalSensorXCoordinate,
+ externalSensorYCoordinate,
+ externalSensorZCoordinate,
+ externalBinarySensorSubtype,
+ externalSensorUnits,
+ externalSensorDecimalDigits,
+ externalSensorLowerCriticalThreshold,
+ externalSensorLowerWarningThreshold,
+ externalSensorUpperCriticalThreshold,
+ externalSensorUpperWarningThreshold,
+ externalSensorState,
+ externalSensorValue,
+ externalSensorHysteresis,
+ reorderexternalSensorTableEntries
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing external sensor readings
+ and configuration settings."
+ ::= { groups 20 }
+
+-- Textual Conventions
+
+MilliAmps ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting sensor readings and thresholds
+ associated with current sensors. If the underlying hardware
+ sensor indicates 1 amp, then the SNMP agent will report
+ a value of 1000 milliamps. The value is scaled in this
+ manner as a way to deal with floating point types
+ that SNMP does not currently support."
+ SYNTAX Unsigned32
+
+MilliVolts ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting sensor readings and thresholds
+ associated with voltage sensors. If the underlying hardware
+ sensor indicates 1 volts, then the SNMP agent will report
+ a value of 1000 millivolts. The value is scaled in this
+ manner as a way to deal with floating point types
+ that SNMP does not currently support."
+ SYNTAX Unsigned32
+
+Watts ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting sensor readings and thresholds
+ associated with active power sensors. If the underlying hardware
+ sensor indicates 1 watt, then the SNMP agent will report
+ a value of 1 watt. No scaling is performed for this type."
+ SYNTAX Unsigned32
+
+VoltAmps ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting sensor readings and thresholds
+ associated with apparent power sensors. If the underlying hardware
+ sensor indicates 1 volt-amp, then the SNMP agent will report
+ a value of 1 volt-amp. No scaling is performed for this type."
+ SYNTAX Unsigned32
+
+DegreesCelsius ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting thresholds
+ associated with temperature sensors. If the underlying hardware
+ sensor indicates 1 degree Celsius, then the SNMP agent will report
+ a value of 1 degree Celsius. No scaling is performed for this type."
+ SYNTAX Unsigned32
+
+TenthDegreesCelsius ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting sensor readings
+ associated with temperature sensors. If the underlying hardware
+ sensor indicates 1 degree Celsius, then the SNMP agent will report
+ a value of 10 tenth degrees Celsius. The value is scaled in this
+ manner as a way to deal with floating point types
+ that SNMP does not currently support."
+ SYNTAX Unsigned32
+
+Hertz ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting sensor readings and thresholds
+ associated with frequency sensors. If the underlying hardware
+ sensor indicates 1 Hertz, then the SNMP agent will report
+ a value of 1 Hertz. No scaling is performed for this type."
+ SYNTAX Unsigned32
+
+RelativeHumidity ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting sensor readings and thresholds
+ associated with humidity sensors. Relative humidity is
+ expressed as percentage and is defined as the ratio of the
+ partial pressure of water vapor in a gaseous mixture of
+ air and water vapor to the saturated vapor pressure of water
+ at a given temperature."
+ SYNTAX Unsigned32 (0..100)
+
+PowerFactorPercentage ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting sensor readings and thresholds
+ associated with power factor sensors. The power factor of
+ an AC power system is defined as the ratio of the real
+ or active power to the apparent power and is a number
+ between 0 and 1. A PowerFactorPercentage value is calculated
+ by taking this ratio and multiplying by 100. The power factor
+ is used to indicate how efficiently a particular load is
+ utilizing energy."
+ SYNTAX Unsigned32 (0..100)
+
+Percentage ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting values in percentage."
+ SYNTAX Unsigned32 (0..100)
+
+SensorTypeEnumeration ::= TEXTUAL-CONVENTION
+ STATUS deprecated
+ DESCRIPTION
+ "The types a sensor can be. This enumeration is deprecated starting with PX 1.3.5"
+ SYNTAX INTEGER { outletCurrent(0),
+ outletMaxCurrent(1),
+ outletVoltage(2),
+ outletActivePower(3),
+ outletApparentPower(4),
+ outletMaxActivePower(5),
+ outletAverageActivePower(6),
+ outletPowerFactor(7),
+ powerBranchVoltage(200),
+ powerBranchFrequency(201),
+ powerBranchTemperature(202),
+ powerBranchCurrent(203),
+ environmentalTemp1(300),
+ environmentalTemp2(301),
+ environmentalTemp3(302),
+ environmentalTemp4(303),
+ environmentalTemp5(304),
+ environmentalTemp6(305),
+ environmentalTemp7(306),
+ environmentalTemp8(307),
+ environmentalHumidity1(400),
+ environmentalHumidity2(401),
+ environmentalHumidity3(402),
+ environmentalHumidity4(403),
+ environmentalHumidity5(404),
+ environmentalHumidity6(405),
+ environmentalHumidity7(406),
+ environmentalHumidity8(407),
+ unitRmsCurrent(500),
+ unitMaxRmsCurrent(501),
+ unitVoltage(502),
+ unitCpuTemp(503),
+ unitActivePower(504),
+ unitApparentPower(505),
+ unitFrequency(506),
+ unitCircuitBreak0State(550),
+ unitCircuitBreak1State(551),
+ unitCircuitBreak2State(552),
+ unitCircuitBreak0Current(600),
+ unitCircuitBreak1Current(601),
+ unitCircuitBreak2Current(602) }
+
+SensorStateEnumeration ::= TEXTUAL-CONVENTION
+ STATUS deprecated
+ DESCRIPTION
+ "The states a sensor can be in.This enumeration is deprecated starting with PX 1.3.5"
+ SYNTAX INTEGER { unavailable(-1),
+ ok(0),
+ belowLowerWarning(1),
+ aboveUpperWarning(2),
+ belowLowerCritical(3),
+ aboveUpperCritical(4) }
+
+StateOfSensorEnumeration ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The states a sensor can be in."
+ SYNTAX INTEGER { unavailable(-1),
+ open(0),
+ closed(1),
+ belowLowerCritical(2),
+ belowLowerWarning(3),
+ normal(4),
+ aboveUpperWarning(5),
+ aboveUpperCritical(6),
+ on(7),
+ off(8),
+ detected(9),
+ notDetected(10),
+ alarmed(11)
+
+ }
+
+TypeOfSensorEnumeration ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The types a sensor can be."
+ SYNTAX INTEGER {
+ rmsCurrent(1),
+ peakCurrent(2),
+ unbalancedCurrent(3),
+ rmsVoltage(4),
+ activePower(5),
+ apparentPower(6),
+ powerFactor(7),
+ activeEnergy(8),
+ apparentEnergy(9),
+ temperature(10),
+ humidity(11),
+ airFlow(12),
+ airPressure(13),
+ onOff(14),
+ trip(15),
+ vibration(16),
+ waterDetection(17),
+ smokeDetection(18),
+ binary(19),
+ contact(20),
+ other(30),
+ none(31)
+ }
+
+WattHours ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "Data type for reporting the active energy"
+ SYNTAX Unsigned32
+
+SensorUnitsEnumeration ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The types a sensor can be."
+ SYNTAX INTEGER { none(-1),
+ other(0),
+ volt(1),
+ amp(2),
+ watt(3),
+ voltamp(4),
+ wattHour(5),
+ voltampHour(6),
+ degreeC(7),
+ hertz(8),
+ percent(9),
+ meterpersec(10),
+ pascal(11),
+ psi(12),
+ g(13),
+ degreeF(14),
+ feet(15),
+ inches(16),
+ cm(17),
+ meters(18)
+ }
+
+
+PowerCIMStatusEnumeration ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The status of a PowerCIM"
+ SYNTAX INTEGER { off(0),
+ on(1)
+ }
+
+EnabledDisabledEnumeration ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The status of a PowerCIM"
+ SYNTAX INTEGER { disabled(0),
+ enabled(1)
+ }
+
+SensorClassEnumeration ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The class of sensor in the event"
+ SYNTAX INTEGER { externalTemperature(0),
+ externalHumidity(1),
+ externalAirFlow(2),
+ externalAirPressure(3)
+ }
+
+EventTypeEnumeration ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The event type"
+ SYNTAX INTEGER { aboveUpperCritical(0),
+ aboveUpperNonCritical(1),
+ belowLowerNonCritical(2),
+ belowLowerCritical(3)
+ }
+EventDirectionEnumeration ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The event direction"
+ SYNTAX INTEGER { asserted(0),
+ deasserted(1),
+ both(2)
+ }
+
+-- the info group
+
+firmwareVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current firmware version in the following format:
+ major.minor.dot.buildnumber.
+ Example: 1.3.5.7416"
+ ::= { info 1 }
+
+serialNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The serial number."
+ ::= { info 2 }
+
+ipAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current IP address. A value of 0.0.0.0 indicates an error
+ or an unset option."
+ ::= { info 3 }
+
+netmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current Netmask. A value of 0.0.0.0 indicates an error
+ or an unset option."
+ ::= { info 4 }
+
+gateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current Gateway. A value of 0.0.0.0 indicates an error
+ or an unset option."
+ ::= { info 5 }
+
+mac OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current MAC address."
+ ::= { info 6 }
+
+hardwareRev OBJECT-TYPE
+ SYNTAX Integer32(0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The hardware revision number."
+ ::= { info 7 }
+
+userName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The login of a user."
+ ::= { info 10 }
+
+objectName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The model type of the device"
+ ::= { info 12 }
+
+objectInstance OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The device name."
+ ::= { info 13}
+
+targetUser OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The user record being operated on"
+ ::= { info 14}
+
+groupName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The group record being operated on"
+ ::= { info 15 }
+
+imageVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The version of the Upgrade image"
+ ::= { info 18 }
+
+sensorDescr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Sensor description indicating which sensor experienced a threshold event.
+ When applicable, the description will indicate the sensor number."
+ ::= { info 19 }
+
+thresholdDescr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Threshold description indicating which configured threshold has been triggered (or cleared)."
+ ::= { info 20 }
+
+thresholdSeverity OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "String (Warning, Critical, etc...) indicating the severity of the threshold which has been triggered (or cleared)."
+ ::= { info 21 }
+
+thresholdEventType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "String (triggered, cleared) indicating if the threshold event indicates that a configured threshold
+ has been triggered or cleared."
+ ::= { info 22 }
+
+status OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The success status of an operation"
+ ::= { info 23 }
+
+slaveIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "In an outlet grouping configuration, this is the IP address of slave PDU. A value of 0.0.0.0 indicates an error
+ or an unset option."
+ ::= { info 24}
+
+
+inputCurrentRating OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The input current Rating"
+ ::= { info 25}
+
+ratedVoltage OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PDU Rated Voltage "
+ ::= { info 26 }
+
+ratedPower OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PDU Rated Power "
+ ::= { info 27 }
+
+
+outletSwitching OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Outlet switching: enabled/disabled; for non-switched PDUs, this value can be read,
+ but cannot be written "
+ ::= { info 28 }
+
+dataLogging OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Data Retrieval: enabled/disabled"
+ ::= { info 29 }
+
+
+dataLoggingInterval OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Data Logging periodicity in seconds. This is the periodicity of the data in the buffer.
+ This value must be a multiple of 3 between 3 and 600. For example, 60 is valid,
+ but 64 is not valid
+ This is being deprecated in favor of measurementsPerLogEntry.
+ The mapping is as follows.
+
+ dataLoggingInterval measurementsPerLogEntry
+ 3n n
+
+ Example: dataLoggingInterval is 60, so every 60 seconds (or 20th sample)
+ data will be placed in the data log
+ measurementsPerLogEntry is 20, so the data log sill store the minimum, average
+ and maximum of every 20 samples
+ "
+ ::= { info 30 }
+
+dataCollectionInterval OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Data Collection periodicity. This is the periodicity of the data collected by the PX. This value
+ is fixed at 3 seconds."
+ ::= { info 31 }
+
+outletEnergySupport OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Outlet Energy Support: Yes/No
+ If the value is No, then outletWattHours and dataLogOutletWattHours will be zero "
+ ::= { info 32 }
+
+currentUnbalanceSupport OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "current Unbalance calculations Supported: Yes/No
+ If the value is No, then currentUnbalance will be zero
+ Default is No "
+ ::= { info 33 }
+
+externalSensorsZCoordinateUnits OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "External Sensor Z Coordinate units: Freeform or Rack Units (U)
+ Default is U "
+ ::= { info 34 }
+
+inlineMeter OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Is this unit an inline meter? Yes/No
+ If Yes, then the folowing pairings hold:
+ Inlet 1 <-> Outlet 1
+ Inlet 2 <-> Outlet 2
+ Inlet 3 <-> Outlet 3
+ Inlet 4 <-> Outlet 4
+
+ Use the inletTable to obtain inlet data
+
+ Use the inletPoleTable to obtain the line data for an inlet.
+
+ "
+ ::= { info 35 }
+
+
+oldSensorState OBJECT-TYPE
+ SYNTAX StateOfSensorEnumeration
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The old sensor state used in Sensor State Transition traps."
+ ::= { info 36}
+
+
+externalSensorNumber OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "A unique value for each sensor. Its value
+ ranges between 1 and the value of externalSensorCount."
+ ::= { info 37 }
+
+
+
+sensorIdentificationString OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "String that uniquely identifies the external sensor.
+ Format is: SensorType,ChannelNumber,SensorSubtype,SerialNumber
+ Example external temperature sensor: Temperature,,,AEI8160083
+ Example external smoke detection sensor: onOff,2,contact,AEJ8160085
+ Example outlet Current: rmsCurrent,,,
+ "
+ ::= { info 38 }
+
+
+
+lastUpgradeStatus OBJECT-TYPE
+ SYNTAX BITS{
+ mainController(0),
+ psoc1(1),
+ psoc2(2),
+ psoc3(3),
+ psoc4(4),
+ psoc5(5),
+ psoc6(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A bit string which indicates which the status of the last upgrade.
+ A value of 1 for a bit position indicates that the corresponding upgrade failed.
+ If all bits are zero, then the upgrade succeeded;
+ otherwise check lastUpgradeErrorDescription for further information.
+"
+ ::= { info 39 }
+
+
+lastUpgradeTimestamp OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time when the last upgrade completed"
+ ::= { info 40 }
+
+
+lastUpgradeErrorDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "String that describes the upgrade errror.
+ This is an empty string if the upgrade succeeded.
+ Format is
+ Failed PSOCs: 1[O:1,2,3-7];3[O:6-9,10-12]
+ This indicates that upgrade of psocs 1 and 3 failed and
+ psoc1 affects outlets 1,2, 3-7
+ and psoc2 affects outlets 6-9,10-12
+ "
+ ::= { info 41 }
+
+
+powerCIMStatus OBJECT-TYPE
+ SYNTAX PowerCIMStatusEnumeration
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The status of the Power CIM: on or off
+ "
+ ::= { info 42 }
+
+
+measurementsPerLogEntry OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The number of measurements used for each entry in the log.
+ 1<= Value <= 200
+ Default is 20
+ This is related to dataLoggingInterval as shown below
+
+ dataLoggingInterval measurementsPerLogEntry
+ 3n n
+
+ Example: dataLoggingInterval is 60, so every 60 seconds (or 20th sample)
+ data will be placed in the data log
+ measurementsPerLogEntry is 20, so the data log sill store the minimum, average
+ and maximum of every 20 samples"
+ ::= { info 43}
+
+psocNumber OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The psoc (Outlet Controller) number"
+ ::= { info 44}
+
+altitude OBJECT-TYPE
+ SYNTAX Integer32(0..3000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The altitude (height above sea level) of the PDU in meters.
+ 0 <= Value <= 3000; default value is 0 meters "
+ ::= { info 45}
+
+configureAlerts OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is an operation. It has write-only semantics.
+ GET operation will return the empty string.
+ For SET operations, it configures alerts
+ The format is a comma separated list of the following parameters.
+ sensorClass, eventType, eventDirection, policyName
+ For sensorclass: use the SensorClass eumeration
+ For eventType: use the EventType enumeration
+ For eventDirection: use the EventDirection enumeration
+ For Policy Name: use the name of the policy; the Policy Name is case sensitive
+ Note: setting this variable will overwrite the existing policy
+
+
+ Example: if the External Temperature upper non-critical threshold is either asserted and deasserted,
+ then execute the policy named multiple destinations
+ the string would be
+ 0,1,2,multiple destinations
+
+
+
+ "
+ ::= { info 46 }
+
+fipsMode OBJECT-TYPE
+ SYNTAX EnabledDisabledEnumeration
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The fips mode: either enabled or disabled.
+ The mode can be set (changed) only if both of the following conditions hold
+ a) the user is admin
+ b) snmpv3 is being used.
+ Changing this mode will result in a reboot of the PX
+ When the PX is in FIPS mode, the follwing conditions hold.
+ a) FIPS approved algorithms must be used
+ b) snmp v1 & v2c are not supported
+ b) snmp v3 must be used with AES and SHA
+ c) https must be used; http is not supported
+ d) Radius authentication is not supported
+ e) Ldaps must be used; ldap is not supported
+ f) ipmi v2.0 must be used
+ "
+ ::= { info 47}
+
+
+
+
+synchronizeWithNTPServer OBJECT-TYPE
+ SYNTAX EnabledDisabledEnumeration
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Will time be obtained using NTP?
+ Deafault is disabled, i.e. time will not be obtained from NTP servers."
+
+ ::= { info 48 }
+
+useDHCPProvidedNTPServer OBJECT-TYPE
+ SYNTAX EnabledDisabledEnumeration
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Will the NTP server addresses be provided by DHCP/BOOTP?
+ This is used only if synchronizeWithNTPServer is enabled
+ Default is enabled, i.e. DHCP provided NTP servers will be used "
+
+ ::= { info 49 }
+
+
+-- Corresponding InetAddressType objects and InetAddress objects must be consistent.
+-- primaryNTPServerAddressType and primaryNTPServerAddress must be consistent
+-- secondaryNTPServerAddressType and secondaryNTPServerAddress must be consistent
+
+-- Attempts to set an InetAddress object to a value inconsistent with the associated InetAddressType
+-- must fail with an inconsistentValue error.
+-- Example:
+-- Suppose InetAddressType = ipv4 and InetAddress = 192.168.25.67
+-- Setting InetAddress to www.xyz.com will return inconsistentValue error
+
+
+-- When InetAddressType is changed to a type inconsistent with InetAddress, InetAddress may not display
+-- the correct value until the format of InetAddress is changed to be consistent with InetAddressType
+-- Example:
+-- Suppose InetAddressType = ipv4 and InetAddress = 192.168.25.67
+-- InetAddressType is set to dns.
+-- A GET operation on InetAddress may not display the correct value.
+-- InetAddress is changed to www.xyz.com
+-- A GET operation on InetAddress displays the correct value.
+
+-- Recommended Approach to changing IP address representation.
+
+-- 1) First change InetAddressType to the correct type.
+-- 2) Next change InetAddress to a value consistent with the type.
+
+-- Example: Change from IPv4 address to hostname
+-- Intially: InetAddressType = ipv4
+-- InetAddress = 192.168.25.67
+-- Change: InetAddressType = dns
+-- InetAddress = 192.67.29.36
+
+
+primaryNTPServerAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Represents the type of the corresponding instance
+ of primaryNTPServerAddress object.
+
+
+ "
+ DEFVAL { ipv4 }
+ ::= { info 50 }
+
+primaryNTPServerAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address of the primary ntp server."
+ ::= { info 51 }
+
+
+secondaryNTPServerAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Represents the type of the corresponding instance
+ of secondaryNTPServerAddress object.
+ Default is ipv4"
+
+ ::= { info 52 }
+
+secondaryNTPServerAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address of the secondary ntp server."
+ ::= { info 53 }
+
+
+
+
+
+daylightSavingsTime OBJECT-TYPE
+ SYNTAX EnabledDisabledEnumeration
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Is daylight savings time enabled?
+ Default is disabled "
+
+ ::= { info 55 }
+
+
+thresholdValue OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The value of the threshold that has been triggered (or cleared).
+ It is used in the thresholdAlarm trap for external numeric sensors only."
+ ::= { info 56 }
+
+
+sensorValue OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The sensor reading that triggered (or cleared) the threshold.
+ It is used in the thresholdAlarm trap for external numeric sensors only."
+ ::= { info 57 }
+
+
+
+
+ipmiOverLAN OBJECT-TYPE
+ SYNTAX EnabledDisabledEnumeration
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IPMI over LAN Mode: either enabled or disabled.
+ It is strongly recommended that SNMPv3 be used to change the mode;
+ SNMPv2c may also be used, but is not recommended.
+ If SNMPv3 is used, then the change can be made only by users belonging to the Admin group.
+ Changing the mode will result in a reboot of the PX.
+
+ "
+ ::= { info 58}
+
+
+
+
+
+
+
+-- the inlets group
+
+-- Implementation for managing the inlets
+
+inletCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of inlets present on this pdu."
+ ::= { inlets 1 }
+
+
+-- the inlets table
+
+-- The inlets table contains information on the pdu's inlets.
+-- It further provides functions for managing them.
+
+inletTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF InletEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of inlet entries. The number of
+ entries is given by the value of inletCount."
+ ::= { inlets 2 }
+
+inletEntry OBJECT-TYPE
+ SYNTAX InletEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An inlet entry containing objects for each inlet"
+ INDEX { inletIndex }
+ ::= { inletTable 1 }
+
+InletEntryStruct ::= SEQUENCE { inletIndex Integer32,
+ inletPoleCount Integer32,
+ inletCurrentRating MilliAmps,
+ inletCurrent MilliAmps,
+ inletVoltage MilliVolts,
+ inletActivePower Watts,
+ inletApparentPower VoltAmps,
+ inletPowerFactor PowerFactorPercentage,
+ inletActiveEnergy WattHours,
+ inletCurrentUnbalance DisplayString,
+ inletCurrentUpperWarning MilliAmps,
+ inletCurrentUpperCritical MilliAmps,
+ inletCurrentLowerWarning MilliAmps,
+ inletCurrentLowerCritical MilliAmps,
+ inletVoltageUpperWarning MilliVolts,
+ inletVoltageUpperCritical MilliVolts,
+ inletVoltageLowerWarning MilliVolts,
+ inletVoltageLowerCritical MilliVolts,
+ inletCurrentUnbalanceUpperCritical Percentage,
+ inletCurrentUnbalanceUpperWarning Percentage,
+ inletCurrentHysteresis Unsigned32,
+ inletVoltageHysteresis Unsigned32,
+ inletCurrentUnbalanceHysteresis Unsigned32
+ }
+
+inletIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each inlet. Its value
+ ranges between 1 and the value of inletCount."
+ ::= { inletEntry 1 }
+
+inletPoleCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of poles for an inlet (1 for single phase, 3 for 3 phase Delta-wired,
+ 4 for 3 phase WYE wired)."
+ ::= { inletEntry 3 }
+
+inletCurrentRating OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The input current Rating"
+ ::= { inletEntry 4}
+
+inletCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for the current sensor
+ attached to the inlet. This value is
+ reported in milliamps (1/1000th of an amp).
+ This OID does not apply to 3 phase systems;
+ a value of 0 will be reported for same."
+ ::= { inletEntry 7 }
+
+inletVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for the voltage sensor
+ attached to the intlet.This value is
+ reported in millivolts (1/1000th of a volt).
+ This OID does not apply to 3 phase systems;
+ a value of 0 will be reported for same."
+ ::= { inletEntry 8 }
+
+inletActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The active power for the inlet
+ This value is reported in Watts."
+ ::= { inletEntry 9 }
+
+inletApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The apparent power for the inlet.
+ This value is reported in Volt-Amps"
+ ::= { inletEntry 10 }
+
+inletPowerFactor OBJECT-TYPE
+ SYNTAX PowerFactorPercentage
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for the power factor
+ of the inlet. The reading represents a
+ percentage in the range of 0% to 100%."
+ ::= { inletEntry 11 }
+
+inletActiveEnergy OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has an invalid value if outletEnergySupport = 'No';
+ In all other cases, it is the value of the cumulative active energy for this inlet.
+ This value is reported in WattHours"
+ ::= { inletEntry 12 }
+
+inletCurrentUnbalance OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string displaying the current unbalance in percent.
+ It will have the value NA if
+ the feature is disabled,
+ the PX is not a 3-phase unit,or
+ the average of the line currents is zero"
+ ::= { inletEntry 15 }
+
+inletCurrentUpperWarning OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper warning (non-critical)
+ current threshold for the inlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { inletEntry 20 }
+
+inletCurrentUpperCritical OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper critical current
+ threshold for the inlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { inletEntry 21 }
+
+
+inletCurrentLowerWarning OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower warning (non-critical)
+ current threshold for the inlet. This value is
+ reported in milliamps (1/1000th of an amp).
+ This OID is valid for inline meter PDU's. only"
+ ::= { inletEntry 22 }
+
+inletCurrentLowerCritical OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower critical current
+ threshold for the inlet. This value is
+ reported in milliamps (1/1000th of an amp).
+ This OID is valid for inline meter PDU's only."
+ ::= { inletEntry 23 }
+
+inletVoltageUpperWarning OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper warning (non-critical)
+ current threshold for the inlet. This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { inletEntry 24 }
+
+inletVoltageUpperCritical OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper critical current
+ threshold for the inlet. This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { inletEntry 25 }
+
+inletVoltageLowerWarning OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower warning (non-critical)
+ current threshold for the inlet. This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { inletEntry 26 }
+
+inletVoltageLowerCritical OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower critical current
+ threshold for the inlet. This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { inletEntry 27 }
+
+inletCurrentUnbalanceUpperCritical OBJECT-TYPE
+ SYNTAX Percentage
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper critical current Unbalance threshold."
+ ::= { inletEntry 28 }
+
+inletCurrentUnbalanceUpperWarning OBJECT-TYPE
+ SYNTAX Percentage
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper warning current Unbalance threshold."
+ ::= { inletEntry 29 }
+
+
+inletCurrentHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { inletEntry 30 }
+
+
+inletVoltageHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions. This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { inletEntry 31 }
+
+inletCurrentUnbalanceHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions. This value is
+ reported in percent"
+ ::= { inletEntry 32 }
+
+-- the inletPole group
+
+-- Implementation for Line data
+
+-- the inletPole table
+
+-- The inletPoleTable table contains information on the poles for an inlet
+
+inletPoleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF InletPoleEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of line input entries. The number of entries is given by
+ the value of inletTable(inletIndex).inletPoleCount."
+ ::= { inletPole 2 }
+
+inletPoleEntry OBJECT-TYPE
+ SYNTAX InletPoleEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the data log containing input line values
+ for a particular input line."
+ INDEX { inletIndex,inletPoleIndex }
+ ::= { inletPoleTable 1 }
+
+InletPoleEntryStruct ::= SEQUENCE { inletPoleIndex Integer32,
+ inletPoleLabel DisplayString,
+ inletPoleCurrent MilliAmps,
+ inletPoleVoltage MilliVolts,
+ inletPoleMaxCurrent MilliAmps,
+ inletPoleActivePower Watts,
+ inletPoleApparentPower VoltAmps,
+ inletPolePowerFactor PowerFactorPercentage,
+ inletPoleActiveEnergy WattHours
+ }
+
+inletPoleIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each line input. Its value
+ ranges between 1 and of inletTable(inletIndex).inletPoleCount."
+ ::= { inletPoleEntry 1 }
+
+
+inletPoleLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string identifying the Line
+ For Single Phase: L1
+ For 3phase Delta wired outlets: L1, L2, L3
+ For 3phase WYE Wired Outlets: L1, L2, L3"
+ ::= { inletPoleEntry 2 }
+
+inletPoleCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the line current reported in MilliAmps.
+ inletPoleIndex = 1; For Single Phase, Input Line Current; For 3-phase, L1 Current
+ inletPoleIndex = 2; For 3-phase, L2 Current
+ inletPoleIndex = 3; For 3-phase, L3 Current"
+ ::= { inletPoleEntry 3 }
+
+inletPoleVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the line-line voltage reported in MilliVolts.
+ inletPoleIndex = 1; Single Phase Input Line Voltage
+ 3-phase, L1-L2 Voltage or L1-N voltage
+ inletPoleIndex = 2; 3-phase L2-L3 Voltage or L2-N voltage
+ inletPoleaIndex = 3; 3-phase L3-L1 Voltage or L3-N voltage"
+ ::= { inletPoleEntry 4 }
+
+inletPoleMaxCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has an invalid value for a single-phase PDU.
+ If inletPoleCount = 1, then the value is invalid;
+ In all other cases, it is the value of the max. current sensor
+ attached to the inlet Pole. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { inletPoleEntry 5 }
+
+inletPoleActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the active power for the line/pole.
+ The value is reported in Watts."
+ ::= { inletPoleEntry 7 }
+
+inletPoleApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the apparent power for the line/pole.
+ The value is reported in Volt-Amps"
+ ::= { inletPoleEntry 8 }
+
+inletPolePowerFactor OBJECT-TYPE
+ SYNTAX PowerFactorPercentage
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the power factor for the line/pole
+ The reading represents a percentage in the range of 0% to 100%."
+ ::= { inletPoleEntry 9 }
+
+inletPoleActiveEnergy OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the cumulative active energy for the line/pole.
+ The value is reported in WattHours"
+ ::= { inletPoleEntry 11 }
+
+
+-- the outlets group
+
+-- Implementation for managing the outlets
+
+outletCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of outlets (regardless of
+ their current state) present on this pdu."
+ ::= { outlets 1 }
+
+-- the outlets table
+
+-- The outlets table contains information on the pdu's outlets.
+-- It further provides functions for managing them.
+
+outletTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OutletEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of outlet entries. The number of
+ entries is given by the value of outletCount."
+ ::= { outlets 2 }
+
+outletEntry OBJECT-TYPE
+ SYNTAX OutletEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An outlet entry containing objects at the
+ for a particular outlet."
+ INDEX { outletIndex }
+ ::= { outletTable 1 }
+
+OutletEntryStruct ::= SEQUENCE { outletIndex Integer32,
+ outletLabel DisplayString,
+ outletOperationalState INTEGER,
+ outletCurrent MilliAmps,
+ outletMaxCurrent MilliAmps,
+ outletVoltage MilliVolts,
+ outletActivePower Watts,
+ outletApparentPower VoltAmps,
+ outletPowerFactor PowerFactorPercentage,
+ outletCurrentUpperWarning MilliAmps,
+ outletCurrentUpperCritical MilliAmps,
+ outletCurrentLowerWarning MilliAmps,
+ outletCurrentLowerCritical MilliAmps,
+ outletCurrentHysteresis Unsigned32,
+ outletCurrentRating MilliAmps,
+ outletWattHours WattHours }
+
+outletIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each outlet. Its value
+ ranges between 1 and the value of outletCount."
+ ::= { outletEntry 1 }
+
+outletLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A textual string containing information
+ about the outlet."
+ ::= { outletEntry 2 }
+
+
+outletOperationalState OBJECT-TYPE
+ SYNTAX INTEGER { error(-1),
+ off(0),
+ on(1),
+ cycling(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A value for each outlet which describes the
+ operational state of the outlet. It is also
+ used to set the operational state of the outlet"
+ ::= { outletEntry 3 }
+
+outletCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for the current sensor
+ attached to the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { outletEntry 4 }
+
+outletMaxCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for the max. current sensor
+ attached to the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { outletEntry 5 }
+
+outletVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for the voltage sensor
+ attached to the outlet.This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { outletEntry 6 }
+
+outletActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for the active power sensor
+ attached to the outlet. This value is
+ reported in Watts."
+ ::= { outletEntry 7 }
+
+outletApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for the apparent power sensor
+ attached to the outlet. This value is
+ reported in Volt-Amps"
+ ::= { outletEntry 8 }
+
+outletPowerFactor OBJECT-TYPE
+ SYNTAX PowerFactorPercentage
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for the power factor
+ of the outlet. The reading represents a
+ percentage in the range of 0% to 100%."
+ ::= { outletEntry 9 }
+
+outletCurrentUpperWarning OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper warning (non-critical)
+ current threshold for the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { outletEntry 20 }
+
+outletCurrentUpperCritical OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper critical current
+ threshold for the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { outletEntry 21 }
+
+
+outletCurrentLowerWarning OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower warning (non-critical)
+ current threshold for the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { outletEntry 22 }
+
+outletCurrentLowerCritical OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower critical current
+ threshold for the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { outletEntry 23 }
+
+outletCurrentHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { outletEntry 24 }
+
+outletCurrentRating OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current rating of the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { outletEntry 30 }
+
+outletWattHours OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the cumulative active energy for this outlet.
+ This value is reported in WattHours"
+ ::= { outletEntry 31 }
+
+-- the unitReadings group
+
+-- The unitReadings group contains sensor reading values
+-- for the PDU unit as a whole
+
+unitCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value for the unit's current sensor in millamps.This object is deprecated
+ in favour of lineCurrent corresponding to lineCurrentLabel = L1"
+ ::= { unitReadings 1 }
+
+unitVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value for the unit's voltage sensor in millivolts.This object is deprecated
+ in favour of lineVoltage corresponding to lineVoltageLabel = L1"
+ ::= { unitReadings 2 }
+
+unitActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value for the unit's active power in watts.This object is deprecated
+ in favour of inletTable.inletActivePower"
+ ::= { unitReadings 3 }
+
+unitApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value for the unit's apparent power in volt-amps. This object is deprecated
+ in favour of inletTable.inletApparentPower"
+ ::= { unitReadings 4 }
+
+unitCpuTemp OBJECT-TYPE
+ SYNTAX TenthDegreesCelsius
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value for the unit's CPU temperature sensor in tenth degrees celsius."
+ ::= { unitReadings 5 }
+
+unitVoltageLowerWarning OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the lower warning (non-critical) unit level voltage threshold.This object is deprecated
+ in favour of unitOrLineVoltageLowerWarning"
+ ::= { unitReadings 60 }
+
+unitVoltageLowerCritical OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the lower critical unit level voltage threshold.This object is deprecated
+ in favour of unitOrLineVoltageLowerCritical"
+ ::= { unitReadings 61 }
+
+unitVoltageUpperWarning OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the upper warning (non-critical) unit level voltage threshold.This object is deprecated
+ in favour of unitOrLineVoltageUpperWarning"
+ ::= { unitReadings 62 }
+
+unitVoltageUpperCritical OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the upper critical unit level voltage threshold.This object is deprecated
+ in favour of unitOrLineVoltageUpperCritical"
+ ::= { unitReadings 63 }
+
+unitCurrentUpperWarning OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the upper warning (non-critical) unit level current threshold.This object is deprecated
+ in favour of unitOrLineCurrentUpperWarning"
+ ::= { unitReadings 70 }
+
+unitCurrentUpperCritical OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the upper critical unit level current threshold. NOTE: This
+ particular threshold is NOT settable. This object is deprecated
+ in favour of unitOrLineCurrentUpperCritica"
+ ::= { unitReadings 71 }
+
+unitOrLineVoltageLowerWarning OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower warning (non-critical) unit level voltage threshold."
+ ::= { unitReadings 90 }
+
+unitOrLineVoltageLowerCritical OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower critical unit level voltage threshold."
+ ::= { unitReadings 91 }
+
+unitOrLineVoltageUpperWarning OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper warning (non-critical) unit level voltage"
+ ::= { unitReadings 92 }
+
+unitOrLineVoltageUpperCritical OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper critical unit level voltage threshold."
+ ::= { unitReadings 93 }
+
+unitOrLineCurrentUpperWarning OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper warning (non-critical) unit level current threshold"
+ ::= { unitReadings 94 }
+
+unitOrLineCurrentUpperCritical OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper critical unit level current threshold. "
+ ::= { unitReadings 95 }
+
+neutralCurrentUpperWarning OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object has an invalid value if inletPoleCount is not equal to 4.
+ If inletPoleCount = 4, then it is the value of the upper warning (non-critical) threshold
+ for the neutral current"
+ ::= { unitReadings 96 }
+
+neutralCurrentUpperCritical OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object has an invalid value if inletPoleCount is not equal to 4.
+ If inletPoleCount = 4, then it is the value of the upper critical threshold
+ for the neutral current."
+ ::= { unitReadings 97 }
+
+unitTempLowerWarning OBJECT-TYPE
+ SYNTAX DegreesCelsius
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower warning (non-critical) unit level temperature threshold."
+ ::= { unitReadings 80 }
+
+unitTempLowerCritical OBJECT-TYPE
+ SYNTAX DegreesCelsius
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the lower critical unit level temperature threshold."
+ ::= { unitReadings 81 }
+
+unitTempUpperWarning OBJECT-TYPE
+ SYNTAX DegreesCelsius
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper warning (non-critical) unit level temperature threshold."
+ ::= { unitReadings 82 }
+
+unitTempUpperCritical OBJECT-TYPE
+ SYNTAX DegreesCelsius
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper critical unit level temperature threshold."
+ ::= { unitReadings 83 }
+
+currentUnbalance OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string displaying the current unbalance in percent.
+ It will have the value NA if
+ the PX is not a 3-phase unit (inletPoleCount = 1),or
+ the feature is disabled (currentUnbalanceSupport = 'No'), or
+ the average of the line currents is zero (inletPoleCurrent = 0 for 1 <= inlePoleIndex <= 3)"
+ ::= { unitReadings 84 }
+
+currentUnbalanceUpperWarning OBJECT-TYPE
+ SYNTAX Percentage
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper warning (non-critical) current unbalance threshold."
+ ::= { unitReadings 85 }
+
+currentUnbalanceUpperCritical OBJECT-TYPE
+ SYNTAX Percentage
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper critical current Unbalance threshold."
+ ::= { unitReadings 86 }
+
+unitOrLineCurrentHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { unitReadings 98 }
+
+unitOrLineVoltageHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions. This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { unitReadings 99 }
+
+
+
+unitTempHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions
+ "
+ ::= { unitReadings 100 }
+
+
+currentUnbalanceHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions
+ "
+ ::= { unitReadings 101 }
+
+-- the externalTemperature group
+
+-- Implementation for managing external temperature sensors
+
+tempSensorCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The number of external temperature sensors (regardless of
+ their current state) present on this pdu.
+ This is deprecated in favor of externalSensors"
+ ::= { environmental 1 }
+
+-- the temperature sensors table
+
+-- The tempSensorTable table contains information on the pdu's external temperature sensors.
+
+tempSensorTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TempSensorEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A list of temperature sensor entries. The number of
+ entries is given by the value of tempSensorCount.
+ This is deprecated in favor of externalSensors"
+ ::= { environmental 2 }
+
+tempSensorEntry OBJECT-TYPE
+ SYNTAX TempSensorEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An entry containing sensor reading and threshold
+ settings for a particular temperature sensor.
+ This is deprecated in favor of externalSensors"
+ INDEX { tempSensorIndex }
+ ::= { tempSensorTable 1 }
+
+TempSensorEntryStruct ::= SEQUENCE { tempSensorIndex Integer32,
+ tempSensorLabel DisplayString,
+ temperature TenthDegreesCelsius,
+ tempLowerWarning DegreesCelsius,
+ tempUpperWarning DegreesCelsius,
+ tempLowerCritical DegreesCelsius,
+ tempUpperCritical DegreesCelsius,
+ tempXCoordinate DisplayString,
+ tempYCoordinate DisplayString,
+ tempZCoordinate DisplayString}
+
+tempSensorIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A unique value for each temperature sensor. Its value
+ ranges between 1 and tempSensorCount.
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 1 }
+
+tempSensorLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "A settable human-readable label for the external temperature
+ sensor. One possible use for this label is to convey sensor
+ location.
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 2 }
+
+temperature OBJECT-TYPE
+ SYNTAX TenthDegreesCelsius
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the external temperature sensor reported
+ in tenth degrees celsius.
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 3 }
+
+tempLowerWarning OBJECT-TYPE
+ SYNTAX DegreesCelsius
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the lower warning (non-critical) threshold.
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 4 }
+
+tempUpperWarning OBJECT-TYPE
+ SYNTAX DegreesCelsius
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the upper warning (non-critical) threshold.
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 5 }
+
+tempLowerCritical OBJECT-TYPE
+ SYNTAX DegreesCelsius
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the lower critical threshold.
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 6 }
+
+tempUpperCritical OBJECT-TYPE
+ SYNTAX DegreesCelsius
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the upper critical threshold.
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 7 }
+
+tempXCoordinate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of X coordinate in freeform
+ with number of characters <= 24
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 8 }
+
+tempYCoordinate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of Y coordinate in freeform
+ with number of characters <= 24
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 9 }
+
+tempZCoordinate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of Z coordinate in one of two formats:
+ either freeform with number of characters <= 24
+ or in Z units so that 0 =< integer value <= 60
+ This is deprecated in favor of externalSensors"
+ ::= { tempSensorEntry 10 }
+
+-- the externalHumidity group
+
+-- Implementation for managing external humidity sensors
+
+humiditySensorCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The number of external humidity sensors (regardless of
+ their current state) present on this pdu.
+ This is deprecated in favor of externalSensors"
+ ::= { environmental 3 }
+
+-- the humidity sensors table
+
+-- The humiditySensorTable table contains information on the pdu's external humidity sensors.
+
+humiditySensorTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HumiditySensorEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A list of humidity sensor entries. The number of
+ entries is given by the value of humiditySensorCount.
+ This is deprecated in favor of externalSensors"
+ ::= { environmental 4 }
+
+humiditySensorEntry OBJECT-TYPE
+ SYNTAX HumiditySensorEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An entry containing sensor reading and threshold
+ settings for a particular humidity sensor.
+ This is deprecated in favor of externalSensors"
+ INDEX { humiditySensorIndex }
+ ::= { humiditySensorTable 1 }
+
+HumiditySensorEntryStruct ::= SEQUENCE { humiditySensorIndex Integer32,
+ humiditySensorLabel DisplayString,
+ humidity RelativeHumidity,
+ humidityLowerWarning RelativeHumidity,
+ humidityUpperWarning RelativeHumidity,
+ humidityLowerCritical RelativeHumidity,
+ humidityUpperCritical RelativeHumidity,
+ humidityXCoordinate DisplayString,
+ humidityYCoordinate DisplayString,
+ humidityZCoordinate DisplayString }
+
+humiditySensorIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A unique value for each humidity sensor. Its value
+ ranges between 1 and humiditySensorCount.
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 1 }
+
+humiditySensorLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "A settable human-readable label for the external humidity
+ sensor. One possible use for this label is to convey sensor
+ location.
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 2 }
+
+humidity OBJECT-TYPE
+ SYNTAX RelativeHumidity
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the external humidity sensor reported
+ as relative humidity (a percentage).
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 3 }
+
+humidityLowerWarning OBJECT-TYPE
+ SYNTAX RelativeHumidity
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the lower warning (non-critical) threshold.
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 4 }
+
+humidityUpperWarning OBJECT-TYPE
+ SYNTAX RelativeHumidity
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the upper warning (non-critical) threshold.
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 5 }
+
+humidityLowerCritical OBJECT-TYPE
+ SYNTAX RelativeHumidity
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the lower critical threshold.
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 6 }
+
+humidityUpperCritical OBJECT-TYPE
+ SYNTAX RelativeHumidity
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the upper critical threshold.
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 7 }
+
+
+humidityXCoordinate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of X coordinate in freeform
+ with number of characters <= 24
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 8 }
+
+humidityYCoordinate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of Y coordinate in freeform
+ with number of characters <= 24
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 9 }
+
+humidityZCoordinate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The value of Z coordinate in one of two formats:
+ either freeform with number of characters <= 24
+ or in Z units so that 0 =< integer value <= 60
+ This is deprecated in favor of externalSensors"
+ ::= { humiditySensorEntry 10 }
+
+-- the externalSensor table
+
+-- The externalSensor table contains information on the pdu's external Sensors
+
+externalSensorCount OBJECT-TYPE
+ SYNTAX Integer32(0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of external sensors"
+ ::= { externalSensors 1}
+
+reorderexternalSensorTableEntries OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is an operation. It has write-only semantics.
+ GET operation will return the empty string.
+ For SET operations, it specifies the new order of the externalSensorTable entries.
+
+ a) The list must contain entries for each managed sensor, even if the sensor is not being moved.
+ b) The list must not have more than 16 entries.
+ c) 1 <= Valid sensorID <= 16
+ d) The length of the list is the value of the largest sensorID in the
+ original (before the move) list of managed sensors.
+ e) Each sensorID must appear only once in the list.
+ f) If there are missing numbers in the original list of sensorIDs,
+ then each missing number must be indicated by a comma.
+
+
+ EXAMPLE 1: Managed sensors have IDs 1,2,3,4,5
+ Move 1 to 13; 2 to 8; 3 to 9; 4 is not moved; 5 moves to 2
+ Existing Position New Position
+ 1 --> 13
+ 2 --> 8
+ 3 --> 9
+ 4 --> 4
+ 5 --> 2
+ Since the largest sensorID before the move is 5, the length of the list is 5
+ Comma separated list is 13,8,9,4,2
+
+ EXAMPLE 2: Managed sensors have IDs 2,5,6,7,11
+ Sensor IDs 1,3,4,8,9,10 do not appear in the list.
+ These positions must be indicated by commas.
+ Move 2 to 13; 5 to 8; 6 to 9; 7 to 16; 11 does not move
+ Existing Position New Position
+ 2 --> 13
+ 5 --> 8
+ 6 --> 9
+ 7 --> 16
+ 11 --> 11
+ Since the largest sensorID before the move is 11, the length of the list is 11
+ Comma separated list is ,13,,,8,9,16,,,,11
+
+ "
+ ::= { externalSensors 2 }
+
+externalSensorTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ExternalSensorEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of externalSensor entries. The number of
+ entries is given by the value of externalSensorCount for the pdu."
+ ::= { externalSensors 3 }
+
+externalSensorEntry OBJECT-TYPE
+ SYNTAX ExternalSensorEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An externalSensor entry containing objects at the
+ for a particular PDU."
+ INDEX { sensorID }
+ ::= { externalSensorTable 1 }
+
+ExternalSensorEntryStruct ::= SEQUENCE {sensorID Integer32,
+ externalSensorType TypeOfSensorEnumeration,
+ externalSensorSerialNumber DisplayString,
+ externalSensorName DisplayString,
+ externalSensorChannelNumber Integer32,
+ externalSensorXCoordinate DisplayString,
+ externalSensorYCoordinate DisplayString,
+ externalSensorZCoordinate DisplayString,
+ externalBinarySensorSubtype TypeOfSensorEnumeration,
+ externalSensorUnits SensorUnitsEnumeration,
+ externalSensorDecimalDigits Unsigned32,
+ externalSensorLowerCriticalThreshold Integer32,
+ externalSensorLowerWarningThreshold Integer32,
+ externalSensorUpperCriticalThreshold Integer32,
+ externalSensorUpperWarningThreshold Integer32,
+ externalSensorHysteresis Unsigned32,
+ externalSensorState StateOfSensorEnumeration,
+ externalSensorValue Integer32 }
+
+sensorID OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each sesnor. Its value
+ ranges between 1 and the value of externalSensorCount."
+ ::= { externalSensorEntry 1 }
+
+
+externalSensorType OBJECT-TYPE
+ SYNTAX TypeOfSensorEnumeration
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of sensor"
+ ::= { externalSensorEntry 2 }
+
+externalSensorSerialNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sensor serial number"
+ ::= { externalSensorEntry 3 }
+
+externalSensorName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The user given name"
+ ::= { externalSensorEntry 4 }
+
+
+externalSensorChannelNumber OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The channel number, applies only to contact sensors;
+ -1 for other sensors"
+ ::= { externalSensorEntry 5 }
+
+externalSensorXCoordinate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The X coordinate"
+ ::= { externalSensorEntry 6 }
+
+externalSensorYCoordinate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Y coordinate"
+ ::= { externalSensorEntry 7 }
+
+externalSensorZCoordinate OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Z coordinate"
+ ::= { externalSensorEntry 8 }
+
+externalBinarySensorSubtype OBJECT-TYPE
+ SYNTAX TypeOfSensorEnumeration
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The subtype of the binary sensor
+ This OID is valid for discrete sensors only."
+ ::= { externalSensorEntry 9 }
+
+externalSensorUnits OBJECT-TYPE
+ SYNTAX SensorUnitsEnumeration
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The base units. Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors"
+ ::= { externalSensorEntry 16 }
+
+externalSensorDecimalDigits OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of digits displayed to the right of the decimal point.
+ Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors"
+ ::= { externalSensorEntry 17 }
+
+externalSensorLowerCriticalThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower critical threshold
+ The value of this OID variable should be scaled by
+ externalSensorDecimalDigits. For example, if the value is 1 and
+ externalSensorDecimalDigits is 2, then actual value is .01
+ Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors"
+ ::= { externalSensorEntry 31 }
+
+externalSensorLowerWarningThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower non-critical (warning) threshold
+ The value of this OID variable should be scaled by
+ externalSensorDecimalDigits. For example, if the value is 1 and
+ externalSensorDecimalDigits is 2, then actual value is .01
+ Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors"
+ ::= { externalSensorEntry 32 }
+
+externalSensorUpperCriticalThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper critical threshold
+ The value of this OID variable should be scaled by
+ externalSensorDecimalDigits. For example, if the value is 1 and
+ externalSensorDecimalDigits is 2, then actual value is .01
+ Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors"
+ ::= { externalSensorEntry 33 }
+
+externalSensorUpperWarningThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper non-critical (warning) threshold
+ The value of this OID variable should be scaled by
+ externalSensorDecimalDigits. For example, if the value is 1 and
+ externalSensorDecimalDigits is 2, then actual value is .01
+ Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors"
+ ::= { externalSensorEntry 34 }
+
+externalSensorHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions
+ The value of this OID variable should be scaled by
+ externalSensorDecimalDigits. For example, if the value is 1 and
+ externalSensorDecimalDigits is 2, then actual value is 0.01.
+ This parameter does not apply
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors."
+ ::= { externalSensorEntry 35 }
+
+
+externalSensorState OBJECT-TYPE
+ SYNTAX StateOfSensorEnumeration
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sensor state"
+ ::= { externalSensorEntry 40 }
+
+externalSensorValue OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sensor reading
+ Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors"
+ ::= { externalSensorEntry 41 }
+
+-- the line Current group
+
+-- Implementation for line Inputs
+
+lineCurrentCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The number of line currents (1 for single phase, 3 for 3 phase Delta-wired,
+ 4 for 3 phase WYE wired).This object is deprecated in favour of inletPoleTable"
+ ::= { lineCurrents 1 }
+
+-- the line input table
+
+-- The lineCurrentTable table contains information on the line inputs.
+
+lineCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF LineCurrentEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A list of line input entries. The number of
+ entries is given by the value of lineInputCount.
+ This object is deprecated in favour of inletPoleTable"
+ ::= { lineCurrents 2 }
+
+lineCurrentEntry OBJECT-TYPE
+ SYNTAX LineCurrentEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An entry containing values and threshold
+ settings for a particular line input.This object is deprecated in favour of inletPoleTable"
+ INDEX { lineCurrentIndex }
+ ::= { lineCurrentTable 1 }
+
+LineCurrentEntryStruct ::= SEQUENCE { lineCurrentIndex Integer32,
+ lineCurrentLabel DisplayString,
+ lineCurrent MilliAmps}
+
+lineCurrentIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A unique value for each line input. Its value
+ ranges between 1 and lineInputCount.
+ This object is deprecated in favour of inletPoleTable"
+ ::= { lineCurrentEntry 1 }
+
+lineCurrentLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A string identifying the Line
+ For Single Phase: L1
+ For 3phase Delta wired outlets: L1, L2, L3
+ For 3phase WYE Wired Outlets: L1, L2, L3, N
+ This object is deprecated in favour of inletPoleTable"
+ ::= { lineCurrentEntry 2 }
+
+lineCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the current reported in MilliAmps.
+ This object is deprecated in favour of inletPoleTable"
+ ::= { lineCurrentEntry 3 }
+
+-- the circuitBreaker group
+
+-- Implementation for circuit Breakers
+
+circuitBreakerCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of circuit breakers."
+ ::= { circuitBreaker 1 }
+-- the circuit breaker table
+
+-- The circuitBreakerTable table contains information on the circuit breakers.
+
+circuitBreakerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CircuitBreakerEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of line input entries. The number of
+ entries is given by the value of lineInputCount."
+ ::= { circuitBreaker 2 }
+
+circuitBreakerEntry OBJECT-TYPE
+ SYNTAX CircuitBreakerEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry containing values and threshold
+ settings for a particular line input."
+ INDEX { circuitBreakerIndex }
+ ::= { circuitBreakerTable 1 }
+
+CircuitBreakerEntryStruct ::= SEQUENCE { circuitBreakerIndex Integer32,
+ circuitBreakerLabel DisplayString,
+ circuitBreakerState INTEGER,
+ circuitBreakerCurrentRating MilliAmps,
+ circuitBreakerCurrent MilliAmps,
+ circuitBreakerCurrentUpperWarning MilliAmps,
+ circuitBreakerCurrentUpperCritical MilliAmps,
+ circuitBreakerCurrentHysteresis Unsigned32 }
+
+circuitBreakerIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each circuit breaker. Its value
+ ranges between 1 and circuitBreakerCount."
+ ::= { circuitBreakerEntry 1 }
+
+circuitBreakerLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string identifying the circuit breaker "
+ ::= { circuitBreakerEntry 2 }
+
+circuitBreakerState OBJECT-TYPE
+ SYNTAX INTEGER { ok(0),
+ tripped(1) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value for the circuit breaker state ."
+ ::= { circuitBreakerEntry 3 }
+
+circuitBreakerCurrentRating OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the circuit breaker current rating
+ in MilliAmps."
+ ::= { circuitBreakerEntry 4 }
+
+circuitBreakerCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the current reported
+ in MilliAmps."
+ ::= { circuitBreakerEntry 5 }
+
+circuitBreakerCurrentUpperWarning OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper warning (non-critical) threshold."
+ ::= { circuitBreakerEntry 7 }
+
+circuitBreakerCurrentUpperCritical OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the upper critical threshold."
+ ::= { circuitBreakerEntry 9 }
+
+circuitBreakerCurrentHysteresis OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The hysteresis used for deassertions
+ reported in milliamps (1/1000th of an amp)"
+ ::= { circuitBreakerEntry 10 }
+
+-- the line Voltage group
+
+-- Implementation for line Voltages
+
+lineVoltageCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The number of line voltages (1 for single phase, 3 for 3 phase.
+ This object is deprecated in favour of inletPoleTable"
+ ::= { lineVoltages 1 }
+
+-- the line voltage table
+
+-- The linevoltageTable table contains information on the line voltages.
+
+lineVoltageTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF LineVoltageEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A list of line input entries. The number of
+ entries is given by the value of lineInputCount.
+ This object is deprecated in favour of linletPoleTable"
+ ::= { lineVoltages 2 }
+
+lineVoltageEntry OBJECT-TYPE
+ SYNTAX LineVoltageEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An entry containing values and threshold
+ settings for a particular line input.
+ This object is deprecated in favour of inletPoleTable"
+ INDEX { lineVoltageIndex }
+ ::= { lineVoltageTable 1 }
+
+LineVoltageEntryStruct ::= SEQUENCE { lineVoltageIndex Integer32,
+ lineVoltageLabel DisplayString,
+ lineVoltage MilliVolts}
+
+lineVoltageIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A unique value for each line input. Its value
+ ranges between 1 and lineInputCount.
+ This object is deprecated in favour of inletPoleTable"
+ ::= { lineVoltageEntry 1 }
+
+lineVoltageLabel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A string identifying the Line
+ For Single Phase: L1
+ For 3phase Delta-wired: L1-L2, L2-L3, L3-L1
+ For 3phase Wye-wired: L1-N, L2-N, L3-N
+ This object is deprecated in favour of inletPoleTable"
+ ::= { lineVoltageEntry 2 }
+
+lineVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the voltage reported in MilliVolts.
+ This object is deprecated in favour of inletPoleTable"
+ ::= { lineVoltageEntry 3 }
+
+-- the data Log group
+
+-- Implementation for data Log
+
+dataLogCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of entries in the dataLog table which is a circular buffer."
+ ::= { dataLog 1 }
+
+dataLogLatestIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of the latest (most recent) entry in dataLogTable ."
+ ::= { dataLog 2 }
+
+-- the data log
+
+-- The dataLogTable table contains the data log.
+
+dataLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DataLogEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of data log entries. The number of
+ entries is given by the value of dataLogCount."
+ ::= { dataLog 3 }
+
+dataLogEntry OBJECT-TYPE
+ SYNTAX DataLogEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the dataLog buffer containing the unit data collected at the instant
+ specified by dataLogTimeStamp"
+ INDEX { dataLogIndex }
+ ::= { dataLogTable 1 }
+
+DataLogEntryStruct ::= SEQUENCE { dataLogIndex Integer32,
+ dataLogTimeStamp Unsigned32,
+ dataLogActivePower Watts,
+ dataLogApparentPower VoltAmps,
+ dataLogAvgActivePower Watts,
+ dataLogMaxActivePower Watts,
+ dataLogMinActivePower Watts,
+ dataLogAvgApparentPower VoltAmps,
+ dataLogMaxApparentPower VoltAmps,
+ dataLogMinApparentPower VoltAmps}
+
+dataLogIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each data sample. Its value
+ ranges between 1 and dataLogCount ."
+ ::= { dataLogEntry 1 }
+
+dataLogTimeStamp OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time when the data was collected. It is measured in seconds relative to
+ January 1, 1970 (midnight UTC/GMT), i.e a value of 0 indicates
+ January 1, 1970 (midnight UTC/GMT)"
+ ::= { dataLogEntry 2 }
+
+dataLogActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value for the pdu's active power sensor in watts.
+ This has been deprecated in favor of
+ dataLogAvgActivePower, dataLogMaxActivePower,dataLogMinActivePower "
+ ::= { dataLogEntry 3 }
+
+dataLogApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value for the pdu's apparent power sensor in volt-amps.
+ This has been deprecated in favor of
+ dataLogAvgApparentPower, dataLogMaxApparentPower,dataLogMinApparentPower "
+ ::= { dataLogEntry 4 }
+
+dataLogAvgActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average active power for this measurement period"
+ ::= { dataLogEntry 5 }
+
+
+dataLogMaxActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum active power for this measurement period"
+ ::= { dataLogEntry 6 }
+
+dataLogMinActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum active power for this measurement period"
+ ::= { dataLogEntry 7 }
+
+dataLogAvgApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average apparent power for this measurement period"
+ ::= { dataLogEntry 8 }
+
+dataLogMaxApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum apparent power for this measurement period"
+ ::= { dataLogEntry 9 }
+
+dataLogMinApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum apparent power for this measurement period"
+ ::= { dataLogEntry 10 }
+
+-- the outlets data group
+
+-- Implementation for storing outlet data
+
+-- the outlets data table
+
+-- The outlets read-only data table contains information on the pdu's outlets.
+-- This data can be uploaded to the manager
+
+dataLogOutletTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DataLogOutletEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of outlet entries. The number of
+ entries is given by the value of outletCount."
+ ::= { dataLogOutlet 1 }
+
+dataLogOutletEntry OBJECT-TYPE
+ SYNTAX DataLogOutletEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the data log containing outlet level data
+ for a particular outlet."
+ INDEX { dataLogIndex,dataLogOutletIndex }
+ ::= { dataLogOutletTable 1 }
+
+DataLogOutletEntryStruct ::= SEQUENCE { dataLogOutletIndex Integer32,
+ dataLogOutletCurrent MilliAmps,
+ dataLogOutletVoltage MilliVolts,
+ dataLogOutletPowerFactor PowerFactorPercentage,
+ dataLogOutletOnTime Unsigned32,
+ dataLogOutletWattHours WattHours,
+ dataLogAvgOutletCurrent MilliAmps,
+ dataLogMaxOutletCurrent MilliAmps,
+ dataLogMinOutletCurrent MilliAmps,
+ dataLogAvgOutletVoltage MilliVolts,
+ dataLogMaxOutletVoltage MilliVolts,
+ dataLogMinOutletVoltage MilliVolts,
+ dataLogAvgOutletPowerFactor PowerFactorPercentage,
+ dataLogMaxOutletPowerFactor PowerFactorPercentage,
+ dataLogMinOutletPowerFactor PowerFactorPercentage,
+ dataLogAvgOutletWattHours WattHours,
+ dataLogMaxOutletWattHours WattHours,
+ dataLogMinOutletWattHours WattHours
+ }
+
+dataLogOutletIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each outlet. Its value
+ ranges between 1 and the value of outletCount."
+ ::= { dataLogOutletEntry 1 }
+
+dataLogOutletCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A unique value for the current sensor
+ attached to the outlet. This value is
+ reported in milliamps (1/1000th of an amp)
+ This has been deprecated in favor of
+ dataLogAvgOutletCurrent , dataLogMaxOutletCurrent ,dataLogMinOutletCurrent "
+ ::= { dataLogOutletEntry 2 }
+
+dataLogOutletVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A unique value for the voltage sensor
+ attached to the outlet.This value is
+ reported in millivolts (1/1000th of a volt)
+ This has been deprecated in favor of
+ dataLogAvgOutletVoltage , dataLogMaxOutletVoltage ,dataLogMinOutletVoltage "
+ ::= { dataLogOutletEntry 3 }
+
+dataLogOutletPowerFactor OBJECT-TYPE
+ SYNTAX PowerFactorPercentage
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A unique value for the power factor
+ of the outlet. The reading represents a
+ percentage in the range of 0% to 100%.
+ This has been deprecated in favor of
+ dataLogAvgOutletPowerFactor, dataLogMaxOutletPowerFactor,dataLogMinOutletPowerFactor "
+ ::= { dataLogOutletEntry 4 }
+
+dataLogOutletOnTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time since this outlet was last switched on.
+ This value is reported in seconds. "
+ ::= { dataLogOutletEntry 5 }
+
+dataLogOutletWattHours OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The cumulative Active Energy for this outlet. This value is
+ reported in WattHours
+ This has been deprecated in favor of
+ dataLogAvgOutletWattHours , dataLogMaxOutletWattHours ,dataLogMinOutletWattHours"
+ ::= { dataLogOutletEntry 6 }
+
+dataLogAvgOutletCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value for the measurement period:
+ A unique value for the current sensor
+ attached to the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { dataLogOutletEntry 7 }
+
+dataLogMaxOutletCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ A unique value for the current sensor
+ attached to the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { dataLogOutletEntry 8 }
+
+dataLogMinOutletCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ A unique value for the current sensor
+ attached to the outlet. This value is
+ reported in milliamps (1/1000th of an amp)"
+ ::= { dataLogOutletEntry 9 }
+
+dataLogAvgOutletVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value for the measurement period:
+ A unique value for the voltage sensor
+ attached to the outlet.This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { dataLogOutletEntry 10 }
+
+dataLogMaxOutletVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ A unique value for the voltage sensor
+ attached to the outlet.This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { dataLogOutletEntry 11 }
+
+dataLogMinOutletVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ A unique value for the voltage sensor
+ attached to the outlet.This value is
+ reported in millivolts (1/1000th of a volt)"
+ ::= { dataLogOutletEntry 12 }
+
+
+dataLogAvgOutletPowerFactor OBJECT-TYPE
+ SYNTAX PowerFactorPercentage
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value for the measurement period:
+ A unique value for the power factor
+ of the outlet. The reading represents a
+ percentage in the range of 0% to 100%"
+ ::= { dataLogOutletEntry 13 }
+
+dataLogMaxOutletPowerFactor OBJECT-TYPE
+ SYNTAX PowerFactorPercentage
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ A unique value for the power factor
+ of the outlet. The reading represents a
+ percentage in the range of 0% to 100%"
+ ::= { dataLogOutletEntry 14 }
+
+dataLogMinOutletPowerFactor OBJECT-TYPE
+ SYNTAX PowerFactorPercentage
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ A unique value for the power factor
+ of the outlet. The reading represents a
+ percentage in the range of 0% to 100%"
+ ::= { dataLogOutletEntry 15 }
+
+dataLogAvgOutletWattHours OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value for the measurement period:
+ The cumulative Active Energy for this outlet. This value is
+ reported in WattHours"
+ ::= { dataLogOutletEntry 16 }
+
+dataLogMaxOutletWattHours OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ The cumulative Active Energy for this outlet. This value is
+ reported in WattHours"
+ ::= { dataLogOutletEntry 17 }
+
+dataLogMinOutletWattHours OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ The cumulative Active Energy for this outlet. This value is
+ reported in WattHours"
+ ::= { dataLogOutletEntry 18 }
+
+
+
+-- the circuitBreaker Data group
+
+-- Implementation for circuit Breakers
+
+-- the circuit breaker table
+
+-- The circuitBreakerTable table contains information on the circuit breakers.
+
+dataLogCircuitBreakerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DataLogCircuitBreakerEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of circuit breaker entries. The number of
+ entries is given by the value of circuitBreakerCount."
+ ::= { dataLogCircuitBreaker 1 }
+
+dataLogCircuitBreakerEntry OBJECT-TYPE
+ SYNTAX DataLogCircuitBreakerEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the data log containing circuit breaker values"
+ INDEX { dataLogIndex, dataLogCircuitBreakerIndex }
+ ::= { dataLogCircuitBreakerTable 1 }
+
+DataLogCircuitBreakerEntryStruct ::= SEQUENCE { dataLogCircuitBreakerIndex Integer32,
+ dataLogCircuitBreakerCurrent MilliAmps,
+ dataLogAvgCircuitBreakerCurrent MilliAmps,
+ dataLogMaxCircuitBreakerCurrent MilliAmps,
+ dataLogMinCircuitBreakerCurrent MilliAmps }
+
+dataLogCircuitBreakerIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each circuit breaker. Its value
+ ranges between 1 and circuitBreakerCount."
+ ::= { dataLogCircuitBreakerEntry 1 }
+
+dataLogCircuitBreakerCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the current reported
+ in MilliAmps.
+ This has been deprecated in favor of
+ dataLogAvgCircuitBreakerCurrent, dataLogMaxOutletCircuitBreakerCurrent,
+ dataLogMinCircuitBreakerCurrent "
+ ::= { dataLogCircuitBreakerEntry 2 }
+
+dataLogAvgCircuitBreakerCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value for the measurement period:
+ The value of the current reported
+ in MilliAmps."
+ ::= { dataLogCircuitBreakerEntry 3 }
+
+dataLogMaxCircuitBreakerCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ The value of the current reported
+ in MilliAmps."
+ ::= { dataLogCircuitBreakerEntry 4 }
+
+dataLogMinCircuitBreakerCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ The value of the current reported
+ in MilliAmps."
+ ::= { dataLogCircuitBreakerEntry 5 }
+
+
+-- the Input Line group
+
+-- Implementation for Input Line
+
+-- the line input table
+
+-- The dataLogInputLineTable table contains information on the line inputs.
+
+dataLogInputLineTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DataLogInputLineEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A list of line input entries. The number of
+ entries is given by the value of lineCurrentCount.
+ This object is deprecated in favour of dataLogInletLineTable"
+ ::= { dataLogInputLine 1 }
+
+dataLogInputLineEntry OBJECT-TYPE
+ SYNTAX DataLogInputLineEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An entry in the data log containing input line values for a particular input line.
+ This object is deprecated in favour of dataLogInletLineTable"
+ INDEX { dataLogIndex,dataLogInputLineIndex }
+ ::= { dataLogInputLineTable 1 }
+
+DataLogInputLineEntryStruct ::= SEQUENCE { dataLogInputLineIndex Integer32,
+ dataLogInputLineCurrent MilliAmps,
+ dataLogInputLineVoltage MilliVolts}
+
+dataLogInputLineIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A unique value for each line input. Its value
+ ranges between 1 and inletTable(inletIndex).inletPoleCount.
+ This object is deprecated in favour of dataLogInletLineTable"
+ ::= { dataLogInputLineEntry 1 }
+
+dataLogInputLineCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the current reported
+ in MilliAmps.
+ For Single Phase: Input Line Current
+ For 3phase Delta-wired: Current for L1, L2, L3
+ For 3phase WYE-wired: Current for L1, L2, L3, N
+ This object is deprecated in favour of dataLogInletLineTable"
+ ::= { dataLogInputLineEntry 2 }
+
+dataLogInputLineVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the voltage reported
+ in MilliVolts.
+ For Single Phase: Input Line Voltage
+ For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1
+ For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N
+ This object is deprecated in favour of dataLogInletLineTable"
+ ::= { dataLogInputLineEntry 3 }
+
+-- the data Log inlets group
+
+-- the inlets table for dataLog
+
+dataLogInletTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DataLogInletEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of inlet entries. The number of
+ entries is given by the value of inletCount."
+ ::= { dataLogInlet 2 }
+
+dataLogInletEntry OBJECT-TYPE
+ SYNTAX DataLogInletEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An inlet entry containing objects at the
+ for a particular outlet."
+ INDEX { dataLogIndex, dataLogInletIndex }
+ ::= { dataLogInletTable 1 }
+
+DataLogInletEntryStruct ::= SEQUENCE { dataLogInletIndex Integer32,
+ dataLogInletCurrentUnbalance DisplayString,
+ dataLogInletActivePower Watts,
+ dataLogInletApparentPower VoltAmps,
+ dataLogInletActiveEnergy WattHours,
+ dataLogAvgInletCurrentUnbalance DisplayString,
+ dataLogMaxInletCurrentUnbalance DisplayString,
+ dataLogMinInletCurrentUnbalance DisplayString,
+ dataLogAvgInletActivePower Watts,
+ dataLogMaxInletActivePower Watts,
+ dataLogMinInletActivePower Watts,
+ dataLogAvgInletApparentPower VoltAmps,
+ dataLogMaxInletApparentPower VoltAmps,
+ dataLogMinInletApparentPower VoltAmps,
+ dataLogAvgInletActiveEnergy WattHours,
+ dataLogMaxInletActiveEnergy WattHours,
+ dataLogMinInletActiveEnergy WattHours
+ }
+
+dataLogInletIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each inlet. Its value
+ ranges between 1 and the value of inletCount."
+ ::= { dataLogInletEntry 1 }
+
+dataLogInletCurrentUnbalance OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A string displaying the current unbalance in percent.
+ It will have the value NA if the feature is disabled,
+ the PX is not a 3-phase unit,or the average of the line currents is zero
+ This has been deprecated in favor of
+ dataLogAvgInletCurrentUnbalance, dataLogMaxInletCurrentUnbalance,
+ dataLogMinInletCurrentUnbalance "
+ ::= { dataLogInletEntry 10 }
+
+dataLogInletActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The active power for the inlet
+ This value is reported in Watts.
+ This has been deprecated in favor of
+ dataLogAvgInletActivePower, dataLogMaxInletActivePower,
+ dataLogMinInletActivePower"
+ ::= { dataLogInletEntry 11 }
+
+dataLogInletApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The apparent power for the inlet.
+ This value is reported in Volt-Amps
+ This has been deprecated in favor of
+ dataLogAvgInletApparentPower, dataLogMaxInletApparentPower,
+ dataLogMinInletApparentPower"
+ ::= { dataLogInletEntry 12 }
+
+dataLogInletActiveEnergy OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the cumulative active energy for this inlet.
+ This value is reported in WattHours
+ This has been deprecated in favor of
+ dataLogAvgInletActiveEnergy, dataLogMaxInletActiveEnergy,
+ dataLogMinInletActiveEnergy"
+ ::= { dataLogInletEntry 13 }
+
+dataLogAvgInletCurrentUnbalance OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average value of the current unbalance for this measurement period
+ A string displaying the current unbalance in percent.
+ It will have the value NA if the feature is disabled,
+ the PX is not a 3-phase unit,or the average of the line currents is zero"
+ ::= { dataLogInletEntry 14 }
+
+dataLogMaxInletCurrentUnbalance OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ A string displaying the current unbalance in percent.
+ It will have the value NA if the feature is disabled,
+ the PX is not a 3-phase unit,or the average of the line currents is zero"
+ ::= { dataLogInletEntry 15 }
+
+dataLogMinInletCurrentUnbalance OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ A string displaying the current unbalance in percent.
+ It will have the value NA if the feature is disabled,
+ the PX is not a 3-phase unit,or the average of the line currents is zero"
+ ::= { dataLogInletEntry 16 }
+
+dataLogAvgInletActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value for the measurement period:
+ The active power for the inlet
+ This value is reported in Watts."
+ ::= { dataLogInletEntry 17 }
+
+dataLogMaxInletActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ The active power for the inlet
+ This value is reported in Watts."
+ ::= { dataLogInletEntry 18 }
+
+dataLogMinInletActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ The active power for the inlet
+ This value is reported in Watts."
+ ::= { dataLogInletEntry 19 }
+
+dataLogAvgInletApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value for the measurement period:
+ The apparent power for the inlet.
+ This value is reported in Volt-Amps"
+ ::= { dataLogInletEntry 20 }
+
+dataLogMaxInletApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ The apparent power for the inlet.
+ This value is reported in Volt-Amps"
+ ::= { dataLogInletEntry 21 }
+
+dataLogMinInletApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ The apparent power for the inlet.
+ This value is reported in Volt-Amps"
+ ::= { dataLogInletEntry 22 }
+
+dataLogAvgInletActiveEnergy OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " The Average value for the measurement period:
+ The value of the cumulative active energy for this inlet.
+ This value is reported in WattHours"
+ ::= { dataLogInletEntry 23 }
+
+dataLogMaxInletActiveEnergy OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ The value of the cumulative active energy for this inlet.
+ This value is reported in WattHours"
+ ::= { dataLogInletEntry 24 }
+
+dataLogMinInletActiveEnergy OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ The value of the cumulative active energy for this inlet.
+ This value is reported in WattHours"
+ ::= { dataLogInletEntry 25 }
+
+
+
+
+-- the dataLogInletPoleTable
+
+-- The dataLogInletPoleTable table contains information on the inlet poles.
+
+dataLogInletPoleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DataLogInletPoleEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of line input entries. The number of
+ entries is given by the value of dataLoginletTable(dataLogInletIndex).inletPoleCount."
+ ::= { dataLogInletPole 1 }
+
+dataLogInletPoleEntry OBJECT-TYPE
+ SYNTAX DataLogInletPoleEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the data log containing input line values
+ for a particular input line."
+ INDEX { dataLogIndex, dataLogInletIndex, dataLogInletPoleIndex }
+ ::= { dataLogInletPoleTable 1 }
+
+DataLogInletPoleEntryStruct ::= SEQUENCE { dataLogInletPoleIndex Integer32,
+ dataLogInletPoleCurrent MilliAmps,
+ dataLogInletPoleVoltage MilliVolts,
+ dataLogAvgInletPoleCurrent MilliAmps,
+ dataLogMaxInletPoleCurrent MilliAmps,
+ dataLogMinInletPoleCurrent MilliAmps,
+ dataLogAvgInletPoleVoltage MilliVolts,
+ dataLogMaxInletPoleVoltage MilliVolts,
+ dataLogMinInletPoleVoltage MilliVolts,
+ dataLogAvgInletPoleActivePower Watts,
+ dataLogMaxInletPoleActivePower Watts,
+ dataLogMinInletPoleActivePower Watts,
+ dataLogAvgInletPoleApparentPower VoltAmps,
+ dataLogMaxInletPoleApparentPower VoltAmps,
+ dataLogMinInletPoleApparentPower VoltAmps,
+ dataLogAvgInletPoleActiveEnergy WattHours,
+ dataLogMaxInletPoleActiveEnergy WattHours,
+ dataLogMinInletPoleActiveEnergy WattHours}
+
+dataLogInletPoleIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each line input. Its value
+ ranges between 1 and lineCurrentCount."
+ ::= { dataLogInletPoleEntry 1 }
+
+dataLogInletPoleCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the current reported
+ in MilliAmps.
+ For Single Phase: Input Line Current
+ For 3phase Delta-wired: Current for L1, L2, L3
+ For 3phase WYE-wired: Current for L1, L2, L3, N
+ This has been deprecated in favor of
+ dataLogAvgInletPoleCurrent, dataLogMaxInletPoleCurrent,
+ dataLogMinInletPoleCurrent"
+ ::= { dataLogInletPoleEntry 2 }
+
+dataLogInletPoleVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The value of the voltage reported
+ in MilliVolts.
+ For Single Phase: Input Line Voltage
+ For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1
+ For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N
+ This has been deprecated in favor of
+ dataLogAvgInletPoleVoltage, dataLogMaxInletPoleVoltage,
+ dataLogMinInletPoleVoltage"
+ ::= { dataLogInletPoleEntry 3 }
+
+dataLogAvgInletPoleCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value for the measurement period:
+ The value of the current reported
+ in MilliAmps.
+ For Single Phase: Input Line Current
+ For 3phase Delta-wired: Current for L1, L2, L3
+ For 3phase WYE-wired: Current for L1, L2, L3, N"
+ ::= { dataLogInletPoleEntry 4 }
+
+dataLogMaxInletPoleCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ The value of the current reported
+ in MilliAmps.
+ For Single Phase: Input Line Current
+ For 3phase Delta-wired: Current for L1, L2, L3
+ For 3phase WYE-wired: Current for L1, L2, L3, N"
+ ::= { dataLogInletPoleEntry 5 }
+
+
+dataLogMinInletPoleCurrent OBJECT-TYPE
+ SYNTAX MilliAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ The value of the current reported
+ in MilliAmps.
+ For Single Phase: Input Line Current
+ For 3phase Delta-wired: Current for L1, L2, L3
+ For 3phase WYE-wired: Current for L1, L2, L3, N"
+ ::= { dataLogInletPoleEntry 6 }
+
+dataLogAvgInletPoleVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average value for the measurement period:
+ The value of the voltage reported
+ in MilliVolts.
+ For Single Phase: Input Line Voltage
+ For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1
+ For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N"
+ ::= { dataLogInletPoleEntry 7 }
+
+dataLogMaxInletPoleVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum value for the measurement period:
+ The value of the voltage reported
+ in MilliVolts.
+ For Single Phase: Input Line Voltage
+ For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1
+ For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N"
+ ::= { dataLogInletPoleEntry 8 }
+
+dataLogMinInletPoleVoltage OBJECT-TYPE
+ SYNTAX MilliVolts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum value for the measurement period:
+ The value of the voltage reported
+ in MilliVolts.
+ For Single Phase: Input Line Voltage
+ For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1
+ For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N"
+ ::= { dataLogInletPoleEntry 9 }
+
+
+dataLogAvgInletPoleActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the the Average value of the active power
+ for the measurement period.
+ The value is reported in Watts."
+ ::= { dataLogInletPoleEntry 10 }
+
+dataLogMaxInletPoleActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the the Maximum value of the active power
+ for the measurement period.
+ The value is reported in Watts."
+ ::= { dataLogInletPoleEntry 11 }
+
+dataLogMinInletPoleActivePower OBJECT-TYPE
+ SYNTAX Watts
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the the Minimum value of the active power
+ for the measurement period.
+ The value is reported in Watts."
+ ::= { dataLogInletPoleEntry 12 }
+
+dataLogAvgInletPoleApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the the Average value of the apparent power
+ for the measurement period.
+ The value is reported in Volt-Amps"
+ ::= { dataLogInletPoleEntry 13 }
+
+dataLogMaxInletPoleApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the the Maximum value of the apparent power
+ for the measurement period.
+ The value is reported in Volt-Amps"
+ ::= { dataLogInletPoleEntry 14 }
+
+dataLogMinInletPoleApparentPower OBJECT-TYPE
+ SYNTAX VoltAmps
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the the Minimum value of the apparent power
+ for the measurement period.
+ The value is reported in Volt-Amps"
+ ::= { dataLogInletPoleEntry 15 }
+
+dataLogAvgInletPoleActiveEnergy OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the the Average value of the active energy
+ for the measurement period.
+ The value is reported in WattHours"
+ ::= { dataLogInletPoleEntry 16 }
+
+dataLogMaxInletPoleActiveEnergy OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the the Maximum value of the active energy
+ for the measurement period.
+ The value is reported in WattHours"
+ ::= { dataLogInletPoleEntry 17 }
+
+dataLogMinInletPoleActiveEnergy OBJECT-TYPE
+ SYNTAX WattHours
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " This object has a valid value only for inline meters.
+ If inlineMeter = 'No', then the value is invalid;
+ In all other cases, it is the the Minimum value of the active energy
+ for the measurement period.
+ The value is reported in WattHours"
+ ::= { dataLogInletPoleEntry 18 }
+
+
+
+
+-- the external sensors Data group
+
+-- Implementation for external sensors
+
+-- the external sensor table
+
+-- The externalSensorTable table contains information on the external sensors.
+
+dataLogExternalSensorTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DataLogExternalSensorEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of external sensor entries. The number of
+ entries is given by the value of externalSensorCount."
+ ::= { dataLogExternalSensor 1 }
+
+dataLogExternalSensorEntry OBJECT-TYPE
+ SYNTAX DataLogExternalSensorEntryStruct
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the data log containing external sensor values"
+ INDEX { dataLogIndex, dataLogExternalSensorIndex }
+ ::= { dataLogExternalSensorTable 1 }
+
+DataLogExternalSensorEntryStruct ::= SEQUENCE { dataLogExternalSensorIndex Integer32,
+ dataLogExternalSensorChanged DisplayString,
+ dataLogExternalSensorState StateOfSensorEnumeration,
+ dataLogAvgExternalSensorValue Integer32,
+ dataLogMaxExternalSensorValue Integer32,
+ dataLogMinExternalSensorValue Integer32 }
+
+dataLogExternalSensorIndex OBJECT-TYPE
+ SYNTAX Integer32(1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unique value for each external sensor. Its value
+ ranges between 1 and externalSensorCount."
+ ::= { dataLogExternalSensorEntry 1 }
+
+dataLogExternalSensorChanged OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether there has been a change in the sensor type/subtype/channel number for this sensorID.
+ This can occur if sensorIDs have been reassigned as a result of
+ a GUI operation or a SET operation on reorderexternalSensorTableEntries.
+
+ Format: SerialNumber=xxxxxxxx; SensorType=dd; SensorSubType=d; ChannelNumber=d
+ SensorSubType and ChannelNumber are present only if NewSensorType=onOff
+ If there was no change from the previous sample, then
+ this string is empty.
+
+ Examples:
+ Sensor changed to Temperature:
+ SerialNumber=AEI8160083; SensorType=10;
+ Sensor changed to onOff/SmokeDetection:
+ SerialNumber=AEI8160083; SensorType=14; SensorSubType= 18; ChannelNumber=1
+ Sensor Channel Number changed:
+ SerialNumber=AEI8160083; SensorType=14; SensorSubType= 18; ChannelNumber=2
+ Sensor SubType changed:
+ SerialNumber=AEI8160083; SensorType=14; SensorSubType= 19; ChannelNumber=2
+ "
+ ::= { dataLogExternalSensorEntry 2 }
+
+dataLogExternalSensorState OBJECT-TYPE
+ SYNTAX StateOfSensorEnumeration
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sensor state.
+ "
+ ::= { dataLogExternalSensorEntry 3 }
+
+dataLogAvgExternalSensorValue OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Average of the sensor values
+ Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors.
+ This value is not valid if dataLogExternalSensorState is unavailable(-1).
+ "
+ ::= { dataLogExternalSensorEntry 4 }
+
+dataLogMaxExternalSensorValue OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Maximum of the sensor values
+ Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors
+ This value is not valid if dataLogExternalSensorState is unavailable(-1).
+ "
+ ::= { dataLogExternalSensorEntry 5 }
+
+dataLogMinExternalSensorValue OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Minimum of the sensor values.
+ Does not apply (gets will return 0)
+ to onOff, trip, vibration, waterDetection,
+ smokeDetection sensors
+ This value is not valid if dataLogExternalSensorState is unavailable(-1).
+ "
+ ::= { dataLogExternalSensorEntry 6 }
+
+
+
+
+-- Start the traps
+
+rebootStarted NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName }
+ STATUS current
+ DESCRIPTION
+ "The reboot process has started"
+ ::= { traps 1 }
+
+rebootCompleted NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance }
+ STATUS current
+ DESCRIPTION
+ "The reboot process is complete"
+ ::= { traps 2 }
+
+userLogin NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ ipAddress }
+ STATUS current
+ DESCRIPTION
+ "A user logged in"
+ ::= { traps 3 }
+
+userLogout NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ ipAddress }
+ STATUS current
+ DESCRIPTION
+ "A user logged out"
+ ::= { traps 4 }
+
+userAuthenticationFailure NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ ipAddress }
+ STATUS current
+ DESCRIPTION
+ "A user authentication attempt failed"
+ ::= { traps 5 }
+
+userSessionTimeout NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ ipAddress }
+ STATUS current
+ DESCRIPTION
+ "A user timed out from the device"
+ ::= { traps 8 }
+
+userAdded NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ targetUser }
+ STATUS current
+ DESCRIPTION
+ "A user was added to the system"
+ ::= { traps 11 }
+
+userModified NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ targetUser }
+ STATUS current
+ DESCRIPTION
+ "A user account was modified"
+ ::= { traps 12 }
+
+userDeleted NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ targetUser }
+ STATUS current
+ DESCRIPTION
+ "A user was deleted from the system"
+ ::= { traps 13 }
+
+groupAdded NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ groupName }
+ STATUS current
+ DESCRIPTION
+ "A group was added to the system"
+ ::= { traps 14 }
+
+groupModified NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ groupName }
+ STATUS current
+ DESCRIPTION
+ "A group was modified"
+ ::= { traps 15 }
+
+
+groupDeleted NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ groupName }
+ STATUS current
+ DESCRIPTION
+ "A group was deleted from the system"
+ ::= { traps 16 }
+
+deviceUpdateStarted NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ ipAddress,
+ imageVersion }
+ STATUS current
+ DESCRIPTION
+ "The device update has started"
+ ::= { traps 20 }
+
+userBlocked NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ ipAddress }
+ STATUS current
+ DESCRIPTION
+ "A blocked user tried to log in"
+ ::= { traps 22 }
+
+powerControl NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ ipAddress,
+ outletLabel,
+ outletOperationalState }
+ STATUS current
+ DESCRIPTION
+ "An outlet has been switched"
+ ::= { traps 23 }
+
+userPasswordChanged NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ targetUser,
+ ipAddress }
+ STATUS current
+ DESCRIPTION
+ "A user password was changed"
+ ::= { traps 24 }
+
+passwordSettingsChanged NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ status }
+ STATUS current
+ DESCRIPTION
+ "Strong password settings changed "
+ ::= { traps 28 }
+
+-- Start new event to support RP products
+
+firmwareFileDiscarded NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName }
+ STATUS current
+ DESCRIPTION
+ "A firmware file discarded "
+ ::= { traps 36 }
+
+firmwareValidationFailed NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName }
+ STATUS current
+ DESCRIPTION
+ "A firmware validation failed "
+ ::= { traps 38 }
+
+securityViolation NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName,
+ ipAddress }
+ STATUS current
+ DESCRIPTION
+ "Security violation."
+ ::= { traps 39 }
+
+logFileCleared NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName }
+ STATUS current
+ DESCRIPTION
+ "The log file has been cleared."
+ ::= { traps 41 }
+
+-- Sensor threshold traps
+thresholdAlarm NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress,
+ sensorDescr,
+ thresholdDescr,
+ thresholdSeverity,
+ thresholdEventType,
+ sensorIdentificationString,
+ thresholdValue,
+ sensorValue }
+ STATUS current
+ DESCRIPTION
+ "Configured sensor theshold event. The 'thresholdEventType' variable will indicate whether or not
+ the threshold triggered or cleared.
+ thresholdValue and sensorValue have valid values only for external temperature and humidity sensors.
+ "
+ ::= { traps 45 }
+
+-- Outlet Grouping Connectivity Application traps
+outletGroupingConnectivityLost NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress,
+ slaveIpAddress }
+ STATUS current
+ DESCRIPTION
+ "Master PDU lost contact with the slave PDU in an outlet grouping configuration."
+ ::= { traps 50 }
+
+-- circuit Breaker tripped/recovered traps
+circuitBreakerTripped NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress,
+ circuitBreakerLabel }
+ STATUS current
+ DESCRIPTION
+ "Circuit Breaker Tripped."
+ ::= { traps 51 }
+
+circuitBreakerRecovered NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress,
+ circuitBreakerLabel }
+ STATUS current
+ DESCRIPTION
+ "Circuit Breaker Recovered."
+ ::= { traps 52 }
+
+
+bulkConfigurationSaved NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress }
+ STATUS current
+ DESCRIPTION
+ "Bulk Configuration saved."
+ ::= { traps 53 }
+
+bulkConfigurationCopied NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress }
+ STATUS current
+ DESCRIPTION
+ "Bulk Configuration saved."
+ ::= { traps 54 }
+
+
+environmentalSensorsConnectivityLost NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress,
+ sensorDescr,
+ externalSensorNumber,
+ externalSensorType,
+ externalSensorName,
+ externalSensorChannelNumber,
+ externalBinarySensorSubtype,
+ externalSensorSerialNumber }
+ STATUS current
+ DESCRIPTION
+ "lost connectivity to environmental Sensors"
+ ::= { traps 55 }
+
+
+
+externalOnOffSensorStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ objectName,
+ objectInstance,
+ ipAddress,
+ externalSensorNumber,
+ externalSensorType,
+ externalSensorName,
+ externalSensorChannelNumber,
+ externalBinarySensorSubtype,
+ externalSensorState,
+ oldSensorState,
+ externalSensorSerialNumber
+ }
+ STATUS current
+ DESCRIPTION
+ "External OnOff Sensor State Change."
+ ::= { traps 56 }
+
+
+environmentalSensorsConnectivityRestored NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress,
+ externalSensorNumber,
+ externalSensorType,
+ externalSensorName,
+ externalSensorChannelNumber,
+ externalBinarySensorSubtype,
+ externalSensorSerialNumber }
+ STATUS current
+ DESCRIPTION
+ " connectivity to environmental Sensor was restored"
+ ::= { traps 57 }
+
+
+voltageMeasurementError NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress,
+ psocNumber
+ }
+ STATUS current
+ DESCRIPTION
+ " voltage measurement error, a Psoc (Outlet Controller) reported zero voltage and non-zero current.
+ Voltage, power and energy measurements may be in error "
+ ::= { traps 58 }
+
+
+fipsModeEnabled NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName
+ }
+ STATUS current
+ DESCRIPTION
+ "FIPS Mode Enabled "
+ ::= { traps 59 }
+
+
+fipsModeDisabled NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName
+ }
+ STATUS current
+ DESCRIPTION
+ "FIPS Mode Disabled "
+ ::= { traps 60 }
+
+
+managingenvironmentalSensor NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress,
+ sensorDescr,
+ externalSensorNumber,
+ externalSensorType,
+ externalSensorName,
+ externalSensorChannelNumber,
+ externalBinarySensorSubtype,
+ externalSensorSerialNumber }
+ STATUS current
+ DESCRIPTION
+ " begin managing environmental Sensor "
+ ::= { traps 61 }
+
+
+
+unmanagingenvironmentalSensor NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ ipAddress,
+ sensorDescr,
+ externalSensorNumber,
+ externalSensorType,
+ externalSensorName,
+ externalSensorChannelNumber,
+ externalBinarySensorSubtype,
+ externalSensorSerialNumber }
+ STATUS current
+ DESCRIPTION
+ " cease managing environmental Sensor"
+ ::= { traps 62 }
+
+ipmiOverLANEnabled NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName
+ }
+ STATUS current
+ DESCRIPTION
+ "IPMI Over LAN Mode has been Enabled "
+ ::= { traps 63 }
+
+
+ipmiOverLANDisabled NOTIFICATION-TYPE
+ OBJECTS { objectName,
+ objectInstance,
+ userName
+ }
+ STATUS current
+ DESCRIPTION
+ "IPMI Over LAN Mode has been Disabled "
+ ::= { traps 64 }
+
+
+
+END
diff --git a/MIBS/raritan/PDU2-MIB b/MIBS/raritan/PDU2-MIB new file mode 100644 index 0000000..415c687 --- /dev/null +++ b/MIBS/raritan/PDU2-MIB @@ -0,0 +1,12557 @@ +PDU2-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI + enterprises, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF + TEXTUAL-CONVENTION, DisplayString, MacAddress, TruthValue, RowPointer FROM SNMPv2-TC + InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB + sysContact, sysName, sysLocation FROM RFC1213-MIB; + +raritan MODULE-IDENTITY + LAST-UPDATED "201711130000Z" -- November 13, 2017 + ORGANIZATION "Raritan" + CONTACT-INFO + "Author: Raritan Americas, Inc. + postal: Raritan Americas, Inc. + 400 Cottontail Lane + Somerset, NJ 08873 + email: tech@raritan.com + phone: +1 732 764 8886" + DESCRIPTION + "This MIB describes the SNMP functions of the Raritan PX2, PX3 + and BCM2 series power distribution units by Raritan." + + REVISION "201711130000Z" -- November 13, 2017 + DESCRIPTION + "PX2/PX3 release 3.4.0: + 1) Changed STATUS of inletConfigurationTable/inletRCMResidualOperatingCurrent to obsolete + 2) Added to trapInformationGroup: + smartCardReaderId + smartCardTimestamp + smartCardType + smartCardId + suspectedTripCauseLabel + 3) Added the following traps: + smartCardInserted + smartCardRemoved + 4) Deprecated the following traps: + rfCodeTagConnected + rfCodeTagDisconnected + 5) Revised the DESCRIPTION of all objects + 6) SensorTypeEnumeration: Added + doorLockState(49) + doorHandleLock(50) + 7) Added to overCurrentProtectorSensorStateChange trap: + suspectedTripCauseLabel" + + REVISION "201612020000Z" -- December 2, 2016 + DESCRIPTION + "PX2/PX3 release 3.3.10: + 1) Added 'none(2)' to DeviceCascadeTypeEnumeration + 2) Deprecated unitConfigurationTable/pxMACAddress + 3) Deprecated unitConfigurationTable/networkInterfaceType + 4) Added pduSerialNumber to the OBJECTS clause of all traps + 5) Deprecated activeDNSServerTable/activeDNSServerAddressSource + 6) Deprecated activeNTPServerTable/activeNTPServerAddressSource + 7) Changed STATUS of unitConfigurationTable/useDHCPProvidedNTPServer to obsolete + 8) Added OBJECT-GROUP obsoleteObjectsGroup + 9) Modified DESCRPTION of the following: + deviceCascadeType + deviceCascadePosition + outletPowerCyclingPowerOffPeriod + pduPowerCyclingPowerOffPeriod + globalOutletPowerCyclingPowerOffPeriod + usbSlaveConnected + usbSlaveDisconnected" + + REVISION "201602160000Z" -- February 16, 2016 + DESCRIPTION + "PX2/PX3 release 3.3.0: + 1) Added inletRatedCurrent to the following traps: + powerMeterModified + powerMeterAdded + 2) Added activeNTPServerCount to unitConfigurationTable + 3) Added activeNTPServerTable" + + REVISION "201602090000Z" -- February 9, 2016 + DESCRIPTION + "PX2/PX3 release 3.2.20: + 1) Added the following: + NetworkInterfaceTypeEnumeration, + networkInterfaceType to unitConfigurationTable + 2) Added AddressSourceEnumeration + 3) Added activeDNS ServerCount to unitConfigurationTable + 4) Added activeDNSServerTable" + + REVISION "201510260000Z" -- October 26, 2015 + DESCRIPTION + "PX2/PX3 release 3.2.10: + 1) Added to trapInformation: + phoneNumber + 2) Added the following traps: + smsMessageTransmissionFailure trap" + + REVISION "201509300000Z" -- September 30, 2015 + DESCRIPTION + "PX2/PX3 release 3.2.1: + - Support for PMC/BCM2 + - Line and node information for component poles + + 1) SensorTypeEnumeration: Added + reactivePower(29) + displacementPowerFactor(35) + 2) SensorUnitsEnumeration: Added + var(23) + 3) ProductTypeEnumeration: Added + powerMeter(3) + 4) Added the following enumerations: + PanelLayoutEnumeration + PanelNumberingEnumeration + CircuitTypeEnumeration + PhaseEnumeration + LineEnumeration + PowerMeterTypeEnumeration + 5) Added the following tables: + inletPoleConfigurationTable + overCurrentProtectorPoleConfigurationTable + outletPoleConfigurationTable + transferSwitchPoleConfigurationTable + powerMeterConfigurationTable + circuitConfigurationTable + circuitPoleConfigurationTable + circuitSensorConfigurationTable + circuitPoleSensorConfigurationTable + circuitSensorLogTable + circuitPoleSensorLogTable + circuitSensorMeasurementsTable + circuitPoleSensorMeasurementsTable + circuitSensorControlTable + 6) unitConfigurationTable: Added + circuitCount + 7) inletDeviceCapabilities: Added + reactivePower(28) + 8) inletPoleCapabilities: Added + phaseAngle(23) + reactivePower(28) + displacementPowerFactor(34) + 9) overCurrentProtectorConfigurationTable: Added + overCurrentProtectorPoleCount + 10) transferSwitchConfigurationTable: Added + transferSwitchPoleCount + 11) Added the following to trapInformation: + circuitNumber + circuitPoleNumber + 12) Added the following traps: + circuitSensorStateChange + circuitPoleSensorStateChange + circuitAdded + circuitDeleted + circuitModified + circuitSensorReset + powerMeterAdded + powerMeterDeleted + powerMeterModified + 13) Revised the DESCRIPTION clauses of: + pduCount + pduId + inletPoleCount" + + REVISION "201502180000Z" -- February 18, 2015 + DESCRIPTION + "PX2/PX3 release 3.1.0: + - Support absolute humidity sensors + + 1) SensorStateEnumeration: Added + nonRedundant(30) + 2) SensorTypeEnumeration: Added + absoluteHumidity(28) + 3) SensorUnitsEnumeration: Added + grampercubicmeter(22) + 4) Corrected the possible states for the rcmState, operatingState and activeInlet sensors + 5) Documented that the unitSensorResetValue object in unitSensorControlTable applies + only to multi-inlet PDUs + 6) Deprecated inletRatedVA, inletRatedFrequency + 7) inletDeviceCapabilities: Corrected bit values for residualCurrent(25) + and rcmState(26)" + + + REVISION "201406040000Z" -- June 04, 2014 + DESCRIPTION + "PX2/PX3 release 3.0.0: + - Support for signed sensor readings + - Support for unit-level power and energy sensors + - Send trap on peripheral device firmware update + - Allow peripheral device auto management to be disabled + - Allow front panel outlet switching to be enabled or disabled + - Support DX-PIR occupancy sensor + + 1) Changed the SYNTAX from Integer32 to Unsigned32: + measurementsUnitSensorValue + 2) Added signed value, range and threshold columns to: + unitSensorConfigurationTable + unitSensorMeasurementsTable + pduSensorStateChange + inletSensorConfigurationTable + inletSensorMeasurementsTable + inletSensorLogTable + inletSensorStateChange + inletPoleSensorConfigurationTable + inletPoleSensorMeasurementsTable + inletPoleSensorLogTable + inletPoleSensorStateChange + overCurrentProtectorSensorConfigurationTable + overCurrentProtectorSensorMeasurementsTable + overCurrentProtectorSensorLogTable + overCurrentProtectorSensorStateChange + outletSensorConfigurationTable + outletSensorMeasurementsTable + outletSensorLogTable + outletSensorStateChange + outletPoleSensorConfigurationTable + outletPoleSensorMeasurementsTable + outletPoleSensorLogTable + outletPoleSensorStateChange + 3) Added unsigned value, range and threshold columns to: + unitSensorLogTable + transferSwitchSensorConfigurationTable + transferSwitchSensorMeasurementsTable + transferSwitchSensorLogTable + transferSwitchSensorStateChange + 4) Added UnitSensorControlTable + 5) Added unitSensorReset and unitSensorStateChange traps + 6) Deprecated pduSensorStateChange trap + 7) Added to unitConfigurationTable: + peripheralDevicesAutoManagement + frontPanelOutletSwitching + frontPanelRCMSelfTest + frontPanelActuatorControl + 8) Added to externalSensorConfigurationTable: + externalSensorAlarmedToNormalDelay + 9) Deprecated: + wireCount in unitConfiguraionTable + tables for wireSensors + traps for wireSensors + 10) SensorStateEnumeration: Added + fail(14) + 11) ProductTypeEnumeration: Renamed + rackSts(2) to transferSwitch + 12) Added: + PeripheralDeviceFirmwareUpdateStateEnumeration + peripheralDeviceFirmwareUpdateState + peripheralDeviceFirmwareUpdate trap + 13) Added userName to the following traps: + bulkConfigurationSaved + bulkConfigurationCopied + lhxSupportChanged + deviceSettingsSaved + deviceSettingsRestored" + + REVISION "201401090000Z" -- January 9, 2014 + DESCRIPTION + "PX2/PX3 release 2.6.0: + - Support for PX3TS transfer switches + + 1) SensorTypeEnumeration: + Removed: + scrOpenStatus + scrShortStatus + Added: + i1SmpsStatus(46) + i2SmpsStatus(47) + switchStatus(48) + 2) SensorStateEnumeration: + Removed: + marginal + fail + Added: + i1OpenFault(22) + i1ShortFault(23) + i2OpenFault(24) + i2ShortFault(25) + fault(26) + warning(27) + critical(28) + 3) unitDeviceCapabilities: Added + i1SmpsStatus(45) + i2SmpsStatus(46) + 4) transferSwitchCapabilities: Added + switchStatus(47) + 5) Added transferSwitchConfiguration table + 6) unitSensorLogTable: + Removed: + logUnitSensorAvgValue + logUnitSensorMaxValue + logUnitSensorMinValue + Added: + logUnitSensorSignedAvgValue + logUnitSensorSignedMaxValue + logUnitSensorSignedMinValue" + + REVISION "201401070000Z" -- January 7, 2014 + DESCRIPTION + "PX2/PX3 release 2.5.30: + - Accumulating sensors (energy counters) can be reset + - Sensor accuray and tolerance variables are deprecated + + 1) Added peripheralDevicePackagePosition and peripheralDevicePackageState + 2) Added radiusError trap + 3) Added serverReachabilityError trap + 4) Deprecated the following: + unitSensorConfigurationTable/unitSensorAccuracy + unitSensorConfigurationTable/unitSensorTolerance + inletSensorConfigurationTable/inletSensorAccuracy + inletSensorConfigurationTable/inletSensorTolerance + inletPoleSensorConfigurationTable/inletPoleSensorAccuracy + inletPoleSensorConfigurationTable/inletPoleSensorTolerance + outletSensorConfigurationTable/outetSensorAccuracy + outletSensorConfigurationTable/outletSensorTolerance + outletPoleSensorConfigurationTable/outetPoleSensorAccuracy + outletPoleSensorConfigurationTable/outletPoleSensorTolerance + overCurrentProtectorSensorConfigurationTable/overCurrentProtectorSensorAccuracy + overCurrentProtectorSensorConfigurationTable/overCurrentProtectorSensorTolerance + externalSensorConfigurationTable/externalSensorAccuracy + externalSensorConfigurationTable/externalSensorTolerance + wireSensorConfigurationTable/wireSensorAccuracy + wireSensorConfigurationTable/wireSensorTolerance + transferSwitchSensorConfigurationTable/transferSwitchSensorAccuracy + transferSwitchSensorConfigurationTable/transferSwitchSensorTolerance + 5) Added inletSensorReset and outletSensorReset traps + 6) Added inletSensorControl and inletSensorControlTable + 7) Added outletSensorControl and outletSensorControlTable + 8) Added unknownPeripheralDeviceAttached trap" + + REVISION "201311210000Z" -- November 21, 2013 + DESCRIPTION + "PX2/PX3 release 2.5.20: + - Support for residual current monitors + - Support for USB cascading with one IP address + - Support for line-neutral voltage sensors + + 1) SensorTypeEnumeration: Added + rmsVoltageLN(25) + residualCurrent(26) + rcmState(27) + 2) SensorStateEnumeration: Added + warning(27) + critical(28) + selfTest(29) + 3) inletDeviceCapabilities: Added + residualCurrent(26) + rcmState(27) + 4) Added rmsVoltageLN(24) to inletPoleCapabilities + 5) Added inletRCMResidualOperatingCurrent to inletConfigurationTable + 6) Added rcmControl under control + 7) Added rcmSelfTestTable under rcmControl + 8) Added DeviceCascadeTypeEnumeration + 9) Added deviceCascadeType, deviceCascadePosition to unitConfigurationTable + 10) Added agentInetPortNumber under trapInformation + 11) Added agentInetPortNumber as a varbind to all traps + 12) Added peripheralDevicePackageTable containing information on peripheral + device packages" + + REVISION "201309180000Z" -- September 18, 2013 + DESCRIPTION + "1) Added serverConnectivityUnrecoverable trap" + + REVISION "201308010000Z" -- August 1, 2013 + DESCRIPTION + "1) Added RCBO OCP types" + + REVISION "201307100000Z" -- July 10, 2013 + DESCRIPTION + "1) Added externalSensorTypeDefaultThresholdsTable" + + REVISION "201307020000Z" -- July 2, 2013 + DESCRIPTION + "1) Added relayBehaviorOnPowerLoss to unitConfigurationTable" + + REVISION "201305210000Z" -- May 21, 2013 + DESCRIPTION + "1) Added inletEnableState to inletConfigurationTable + 2) Added traps: inletEnabled and inletDisabled" + + REVISION "201304260000Z" -- April 26, 2013 + DESCRIPTION + "1) Added traps: webcamInserted and webcamRemoved + 2) Added trapInformation parameters: webcamModel, webcamConnectionPort" + + REVISION "201303270000Z" -- March 27, 2013 + DESCRIPTION + "1) Changed outletSource to outletPowerSource in outletConfigurationTable + 2) Changed transferSwitchSource1 and transferSwitchSource2 to + transferSwitchPowerSource1 and transferSwitchPowerSource2 in transferSwitchConfigurationTable + 3) Changed overCurrentProtectorSource to overCurrentProtectorPowerSource in overCurrentProtectorConfigurationTable + 4) Changed wireSource to wirePowerSource in wireConfigurationTable" + + REVISION "201303251000Z" -- March 25, 2013 + DESCRIPTION + "1) Added comments showing the possible states for each sensor type." + + REVISION "201303250000Z" -- March 25, 2013 + DESCRIPTION + "1) Added outletSource to outletConfigurationTable + 2) Added transferSwitchSource1 and transferSwitchSource2 to transferSwitchConfigurationTable + 3) Added overCurrentProtectorSource to overCurrentProtectorConfigurationTable + 4) Added wireSource to wireConfigurationTable" + + REVISION "201303180000Z" -- March 18, 2013 + DESCRIPTION + "1) Added meteringControllerCount to the unitConfigurationTable + 2) Added meteringController to BoardTypeEnumeration" + + REVISION "201302250000Z" -- February 25, 2013 + DESCRIPTION + "1) Added ProductTypeEnumeration + 2) Added productType to unitConfigurationTable" + + + REVISION "201302040000Z" -- February 04, 2013 + DESCRIPTION + "1) Added TransferSwitchTransferReasonEnumeration + 2) Added transferSwitchLastTransferReason to transferSwitchControlTable + 3) Added transferSwitchLastTransferReason to transferSwitchSensorStateChange trap" + + REVISION "201301240000Z" -- January 24, 2013 + DESCRIPTION + "1) Added required sensor types and units" + + REVISION "201211200000Z" -- November 20, 2012 + DESCRIPTION + "1) Added externalSensorIsActuator and externalSensorPosition to the externalSensorConfigurationTable + 2) Added actuatorControlTable" + + REVISION "201211150000Z" -- November 15, 2012 + DESCRIPTION + "1) Removed transferSwitchOutputCapabilities from transferSwitchConfigurationTable + 2) Removed the following tables: + transferSwitchOutputSensorConfigurationTable + transferSwitchOutputSensorLogTable + transferSwitchOutputSensorMeasurementsTable + 3) Removed transferSwitchOutputSensorStateChange trap + 4) Added transferSwitchControlTable + 5) Removed the following entries from SensorTypeEnumeration: + overTemperatureFault + fans + internalFault + inletPhaseDeviationFault + overloadFault + 6) Added the following entries to SensorTypeEnumeration: + overloadStatus + overheatStatus + scrOpenStatus + scrShortStatus + fanStatus + inletPhaseSyncAngle + inletPhaseSync + 7) Added the following entries to SensorStateEnumeration: + inSync, + outOfSync + 8) Renamed transferSwitchNoTransferIfPhaseDeviationFault to + transferSwitchAutoReTransferRequiresPhaseSync" + + REVISION "201210050000Z" -- October 5, 2012 + DESCRIPTION + "1) Modified the DESCRIPTION of the following: + outletSwitchControlTable + transferSwitchOutputSensorMeasurementsEntry + overCurrentProtectorSensorMeasurementsEntry + outletPoleSensorMeasurementsEntry + transferSwitchOutputSensorLogEntry + transferSwitchOutputSensorLogTable + wireSensorLogEntry + externalSensorNumber + controllerConfigurationEntry + SensorUnitsEnumeration + measurementsGroup + logGroup" + + REVISION "201210040000Z" -- October 4, 2012 + DESCRIPTION + "1) In the transferSwitchConfigurationTable, + replaced transferSwitchFrequencyDeviation with + transferSwitchLowerMarginalFrequency and transferSwitchUpperMarginalFrequency" + + REVISION "201209280000Z" -- September 28, 2012 + DESCRIPTION + "1) Modified the DESCRIPTION of the following: + bulkConfigurationCopied, userModified, userSessionTimeout" + + REVISION "201209210000Z" -- September 21, 2012 + DESCRIPTION + "1) Added the following traps: + deviceSettingsSaved, deviceSettingsRestored" + + REVISION "201209200000Z" -- September 20, 2012 + DESCRIPTION + "1) Added the following objects to the transferSwitchConfigurationTable: + transferSwitchInternalFaultType + 2) Added transferSwitchInternalFaultType to transferSwitchSensorStateChange trap + 3) Added marginal to SensorStateEnumeration" + + REVISION "201209170000Z" -- September 17, 2012 + DESCRIPTION + "1) Deprecated the following objects from the unitConfigurationTable + pxInetAddressType + pxInetIPAddress + pxInetNetmask + pxInetGateway" + + REVISION "201209040000Z" -- September 4, 2012 + DESCRIPTION + "Support for transfer Switch objects and sensors + 1) Added transferSwitchCount to unitConfigurationTable + 2) Added the following tables: + transferSwitchConfigurationTable + transferSwitchSensorConfigurationTable + transferSwitchSensorLogTable + transferSwitchSensorMeasurementsTable + transferSwitchOutputSensorConfigurationTable + transferSwitchOutputSensorLogTable + transferSwitchOutputSensorMeasurementsTable + 3) Added + transferSwitchSensorStateChange trap + transferSwitchOutputSensorStateChange trap" + + REVISION "201206220000Z" -- June 22, 2012 + DESCRIPTION + "1) Added surgeProtectorStatus to SensorTypeEnumeration + 2) Added surgeProtectorStatus to inletDeviceCapabilities" + + REVISION "201206180000Z" -- June 18, 2012 + DESCRIPTION + "1) Added a comment before the section listing the traps. + The comment notes that the pxInetIPAddressType and + pxInetIPAddress fields are not used for IPv6 traps" + + REVISION "201206060000Z" -- June 6, 2012 + DESCRIPTION + "Support for wire objects and sensors + 1) Added wireCount to unitConfigurationTable + 2) Added the following tables: + wireConfigurationTable + wireSensorConfigurationTable + wireSensorLogTable + wireSensorMeasurementsTable + 3) Added wireSensorStateChange trap" + + REVISION "201205250000Z" -- May 25, 2012 + DESCRIPTION + "1) Added userAccepted/DeclinedRestrictedServiceAgreement traps" + + REVISION "201205150000Z" -- May 15, 2012 + DESCRIPTION + "Added support for NTP servers + 1) Added the following objects under info: + synchronizeWithNTPServer + useDHCPProvidedNTPServer + firstNTPServerAddressType + firstNTPServerAddress + secondNTPServerAddressType + secondNTPServerAddress" + + REVISION "201203260000Z" -- March 26, 2012 + DESCRIPTION + "1) Added lhxSupportChanged trap" + + REVISION "201112130000Z" -- December 13, 2011 + DESCRIPTION + "1) Added usbSlaveConnected, usbSlaveDisonnected traps" + + REVISION "201111290000Z" -- November 29, 2011 + DESCRIPTION + "1) Added cascadedDeviceConnected to UnitConfigurationEntryStruct" + + REVISION "201110250000Z" -- October 25, 2011 + DESCRIPTION + "1) Added DeviceIdentificationParameterEnumeration + 2) Added deviceIdentificationChanged Trap + 3) Added sysContact, sysName, sysLocation to all traps" + + REVISION "201106160000Z" -- June 16, 2011 + DESCRIPTION + "1) Changed DESCRIPTION of outletSequencingDelay" + + REVISION "201103220000Z" -- March 22, 2011 + DESCRIPTION + "1) Added rfCodeTagConnected, rfCodeTagDisconnected traps + 2) Changed MAX-ACCESS for externalOnOffSensorSubtype to read-write" + + REVISION "201102210000Z" -- February 21, 2011 + DESCRIPTION + "1) Added rpm(19) to SensorUnitsEnumeration" + + REVISION "201102140000Z" -- February 14, 2011 + DESCRIPTION + "1) Changed 5WIRE IEC60309 enumerations from 250V to 208V" + + REVISION "201102080000Z" -- February 8, 2011 + DESCRIPTION + "1) Removed OnOffSensorSubtypeEnumeration + 2) Changed SYNTAX of externalOnOffSensorSubtype to SensorTypeEnumeration + 3) Added binary, contact, fanspeed, none to SensorTypeEnumeration + 4) Changed outletPoleCapabilities to be the same as inletPoleCapabilities" + + REVISION "201102030000Z" -- February 3, 2011 + DESCRIPTION + "1) Added externalSensorSerialNumber,externalOnOffSensorSubtype, externalSensorChannelNumber + to the externalSensorStateChange trap." + + REVISION "201101310000Z" -- January 31, 2011 + DESCRIPTION + "1) Modifed the DESCRIPTION of the powerControl trap" + + REVISION "201012150000Z" -- December 15, 2010 + DESCRIPTION + "1) Added dataLoggingEnableForAllSensors to logConfigurationTable" + + REVISION "201012131131Z" -- December 13, 2010 + DESCRIPTION + "1) Added inrushGuardDelay to unitConfigurationTable + 2) Added outletSequenceDelay to outletConfigurationTable + 3) Deprecated outletSequencingDelay" + + REVISION "201012130000Z" -- December 13, 2010 + DESCRIPTION + "1) Added externalOnOffSensorSubtype to ExternalSensorConfigurationEntryStruct + 2) Added OnOffSensorSubtypeEnumeration + 3) Added alarmed to SensorStateEnumeration + 4) Removed firmwareFileDiscarded trap + 5) Removed securityViolation trap" + + REVISION "201012070000Z" -- December 7, 2010 + DESCRIPTION + "1) Changed DESCRIPTION of measurementPeriod to say that the value is fixed at 1 second" + + REVISION "201010070000Z" -- October 7, 2010 + DESCRIPTION + "1) Added ocpFUSEPAIR(5) to OverCurrentProtectorTypeEnumeration + 2) Changed ocpFUSE1POLE(4) to ocpFUSE(4) in OverCurrentProtectorTypeEnumeration" + + REVISION "201010040000Z" -- October 4, 2010 + DESCRIPTION + "1) added ocpFUSE2POLE(5) to OverCurrentProtectorTypeEnumeration + 2) changed ocpFUSE(4) to ocpFUSE1POLE(4) in OverCurrentProtectorTypeEnumeration" + + REVISION "201009010000Z" -- September 1, 2010 + DESCRIPTION + "1) Removed userName from serverNotReachable and serverReachable traps" + + REVISION "201008050000Z" -- August 5, 2010 + DESCRIPTION + "1) Added reliabilityDataTableSequenceNumber + 2) Changed SYNTAX of reliabilityErrorLogIndex to Integer32(1..2147483647)" + + REVISION "201007230000Z" -- July 23, 2010 + DESCRIPTION + "1) Moved serverCount to unitConfigurationTable" + + REVISION "201007220000Z" -- July 22, 2010 + DESCRIPTION + "1) Added support for the Reliability Tables + 2) Added new group reliabilityGroup + 3) Defined nodes reliability,reliabilityData,reliabilityErrorLog + 4) Added reliabilityDataTable & reliabilityErrorLogTable" + + REVISION "201007210000Z" -- July 21, 2010 + DESCRIPTION + "1) Added plug56PA320 to PlugTypeEnumeration + 2) Added plug56P320F to PlugTypeEnumeration" + + REVISION "201007140000Z" -- July 14, 2010 + DESCRIPTION + "1) Added the following traps: + pingServerEnabled + pingServerDisabled + serverNotReachable + serverReachable + 2) Added the serverReachabilityTable" + + REVISION "201007060000Z" -- July 6, 2010 + DESCRIPTION + "1) Added externalSensorChannelNumber to externalSensorConfigurationTable" + + REVISION "201007010000Z" -- July 1, 2010 + DESCRIPTION + "1) Added outletSwitchingState to outletSwitchControlTable + 2) Added outletSwitchingTimeStamp to outletSwitchControlTable" + + REVISION "201006300000Z" -- June 30, 2010 + DESCRIPTION + "1) Added switchingOperation to the powerControl trap" + + REVISION "201006210000Z" -- June 21, 2010 + DESCRIPTION + "1) Added support for Load shedding + 2) Added loadShedding to the unitConfigurationTable. + 3) Added nonCritical to the outletConfigurationTable + 4) Added loadSheddingModeEntered & loadSheddingModeExited traps + 5) Modified description of inletPlug in inletConfigurationTable" + + REVISION "201006030000Z" -- June 3, 2010 + DESCRIPTION + "1) Added plugOTHER to PlugTypeEnumeration + 2) Added receptacleOTHER to ReceptacleTypeEnumeration + 3) Added inletPlugDescriptor to inletConfigurationTable + 4) Added outletReceptacleDescriptor to outletConfigurationTable" + + REVISION "201005270000Z" -- May 27, 2010 + DESCRIPTION + "1) Added INetAddressType and INetAddress to represent IP addresses + 2) unitConfigurationTable: deprecated pxIpAddress + 3) unitConfigurationTable: added + pxInetAddressType + pxInetIPAddress + pxInetNetmask + pxInetGateway + 4) Added pxInetAddressType,pxInetIPAddress to all traps + 5) Defined new trap deviceUpdateFailed" + + REVISION "201005240000Z" -- May 24, 2010 + DESCRIPTION + "Added typeOfSensor to externalSensorStateChange trap" + + REVISION "201004190000Z" -- April 19, 2010 + DESCRIPTION + "Modified the DESCRIPTION of the deviceUpdateCompleted trap" + + REVISION "201004150000Z" -- April 15, 2010 + DESCRIPTION + "Modified the DESCRIPTION of all SensorStateChangeDelay parameters" + + REVISION "201004080000Z" -- April 8, 2010 + DESCRIPTION + "Modified the DESCRIPTION of sensor parameters that do not apply to discrete sensors" + + REVISION "201003290000Z" -- March 29, 2010 + DESCRIPTION + "Added trap ldapError" + + REVISION "201003250000Z" -- March 25, 2010 + DESCRIPTION + "Changed the SYNTAX of the following objects from Integer32 to Unsigned32: + logInletSensorMaxValue, + logInletSensorMinValue, + logInletSensorAvgValue, + logInletPoleSensorMaxValue, + logInletPoleSensorMinValue, + logInletPoleSensorAvgValue, + logOutletSensorMaxValue, + logOutletSensorMinValue, + logOutletSensorAvgValue, + logOutletPoleSensorMaxValue, + logOutlePoletSensorMinValue, + logOutletPoleSensorAvgValue, + logOverCurrentProtectorSensorMaxValue, + logOverCurrentProtectorSensorMinValue, + logOverCurrentProtectorSensorAvgValue, + measurementsInletSensorValue, + measurementsInletPoleSensorValue, + measurementsOutletSensorValue, + measurementsOutletPoleSensorValue, + measurementsOverCurrentProtectorSensorValue" + + REVISION "201003160000Z" -- March 16, 2010 + DESCRIPTION + "Added trap smtpMessageTransmissionFailure" + + REVISION "201003010000Z" -- March 1, 2010 + DESCRIPTION + "Changed externalSensorsZCoordinateUnits to an enumeration" + + REVISION "201001290000Z" -- January 29, 2010 + DESCRIPTION + "The first version of the MIB" + + ::= { enterprises 13742 } + +pdu2 OBJECT IDENTIFIER ::= { raritan 6 } + +traps OBJECT IDENTIFIER ::= { pdu2 0 } +trapInformation OBJECT IDENTIFIER ::= { traps 0 } +board OBJECT IDENTIFIER ::= { pdu2 1 } +environmental OBJECT IDENTIFIER ::= { pdu2 2 } +configuration OBJECT IDENTIFIER ::= { pdu2 3 } +control OBJECT IDENTIFIER ::= { pdu2 4 } +measurements OBJECT IDENTIFIER ::= { pdu2 5 } +log OBJECT IDENTIFIER ::= { pdu2 6 } +conformance OBJECT IDENTIFIER ::= { pdu2 9 } +reliability OBJECT IDENTIFIER ::= { pdu2 10 } + +unit OBJECT IDENTIFIER ::= { configuration 2 } +inlets OBJECT IDENTIFIER ::= { configuration 3 } +overCurrentProtector OBJECT IDENTIFIER ::= { configuration 4 } +outlets OBJECT IDENTIFIER ::= { configuration 5 } +externalSensors OBJECT IDENTIFIER ::= { configuration 6 } +serverReachability OBJECT IDENTIFIER ::= { configuration 7 } +wires OBJECT IDENTIFIER ::= { configuration 8 } +transferSwitch OBJECT IDENTIFIER ::= { configuration 9 } +powerMeter OBJECT IDENTIFIER ::= { configuration 10 } +circuit OBJECT IDENTIFIER ::= { configuration 11 } + +outletControl OBJECT IDENTIFIER ::= { control 1 } +externalSensorControl OBJECT IDENTIFIER ::= { control 2 } +transferSwitchControl OBJECT IDENTIFIER ::= { control 3 } +actuatorControl OBJECT IDENTIFIER ::= { control 4 } +rcmControl OBJECT IDENTIFIER ::= { control 5 } +inletSensorControl OBJECT IDENTIFIER ::= { control 6 } +outletSensorControl OBJECT IDENTIFIER ::= { control 7 } +unitSensorControl OBJECT IDENTIFIER ::= { control 8 } +circuitSensorControl OBJECT IDENTIFIER ::= { control 9 } + +measurementsUnit OBJECT IDENTIFIER ::= { measurements 1 } +measurementsInlet OBJECT IDENTIFIER ::= { measurements 2 } +measurementsOverCurrentProtector OBJECT IDENTIFIER ::= { measurements 3 } +measurementsOutlet OBJECT IDENTIFIER ::= { measurements 4 } +measurementsExternalSensor OBJECT IDENTIFIER ::= { measurements 5 } +measurementsWire OBJECT IDENTIFIER ::= { measurements 6 } +measurementsTransferSwitch OBJECT IDENTIFIER ::= { measurements 7 } +measurementsCircuit OBJECT IDENTIFIER ::= { measurements 8 } + +logUnit OBJECT IDENTIFIER ::= { log 1 } +logInlet OBJECT IDENTIFIER ::= { log 2 } +logOverCurrentProtector OBJECT IDENTIFIER ::= { log 3 } +logOutlet OBJECT IDENTIFIER ::= { log 4 } +logExternalSensor OBJECT IDENTIFIER ::= { log 5 } +logWire OBJECT IDENTIFIER ::= { log 6 } +logTransferSwitch OBJECT IDENTIFIER ::= { log 7 } +logCircuit OBJECT IDENTIFIER ::= { log 8 } + +reliabilityData OBJECT IDENTIFIER ::= { reliability 1 } +reliabilityErrorLog OBJECT IDENTIFIER ::= { reliability 2 } + +compliances OBJECT IDENTIFIER ::= { conformance 1 } +groups OBJECT IDENTIFIER ::= { conformance 2 } + +-- Conformance Information +-- compliance statements +complianceRev2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The requirements for conformance to the PDU2-MIB." + MODULE -- this module + + GROUP configGroup + DESCRIPTION + "The configuration group." + + OBJECT powerMeterPhaseCTRating + MIN-ACCESS read-only + DESCRIPTION + "configuration is not required" + + OBJECT powerMeterNeutralCTRating + MIN-ACCESS read-only + DESCRIPTION + "configuration is not required" + + OBJECT powerMeterEarthCTRating + MIN-ACCESS read-only + DESCRIPTION + "configuration is not required" + + OBJECT circuitName + MIN-ACCESS read-only + DESCRIPTION + "configuration is not required" + + OBJECT circuitRatedCurrent + MIN-ACCESS read-only + DESCRIPTION + "configuration is not required" + + OBJECT circuitPoleCTNumber + MIN-ACCESS read-only + DESCRIPTION + "configuration is not required" + + OBJECT circuitPolePhase + MIN-ACCESS read-only + DESCRIPTION + "configuration is not required" + + OBJECT circuitCTRating + MIN-ACCESS read-only + DESCRIPTION + "configuration is not required" + + GROUP logGroup + DESCRIPTION + "The log group." + + GROUP measurementsGroup + DESCRIPTION + "The measurements group." + + GROUP controlGroup + DESCRIPTION + "The control group." + + GROUP trapInformationGroup + DESCRIPTION + "The information group." + + GROUP trapsGroup + DESCRIPTION + "The information group." + + GROUP reliabilityGroup + DESCRIPTION + "The reliability group." + + ::= { compliances 2 } + +complianceRev1 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The requirements for conformance to the PDU2-MIB." + MODULE -- this module + + GROUP ipAddressGroup + DESCRIPTION + "The ipAddress group." + + GROUP oldConfigGroup + DESCRIPTION + "old (deprecated) configuration data" + + GROUP oldLogGroup + DESCRIPTION + "old (deprecated) logging data" + + GROUP oldMeasurementsGroup + DESCRIPTION + "old (deprecated) measurement data" + + GROUP oldTrapsGroup + DESCRIPTION + "old (deprecated) traps" + + ::= { compliances 1 } + +-- units of conformance + +configGroup OBJECT-GROUP + OBJECTS { pduCount, + pduManufacturer, + pduModel, + pduSerialNumber, + pduRatedVoltage, + pduRatedCurrent, + pduRatedFrequency, + pduRatedVA, + pduImage, + inletCount, + transferSwitchCount, + productType, + overCurrentProtectorCount, + outletCount, + inletControllerCount, + outletControllerCount, + meteringControllerCount, + externalSensorCount, + circuitCount, + utcOffset, + pduName, + boardVersion, + boardFirmwareVersion, + boardFirmwareTimeStamp, + unitSensorLogAvailable, + unitSensorUnits, + unitSensorDecimalDigits, + unitSensorResolution, + unitSensorMaximum, + unitSensorMinimum, + unitSensorHysteresis, + unitSensorStateChangeDelay, + unitSensorLowerCriticalThreshold, + unitSensorLowerWarningThreshold, + unitSensorUpperCriticalThreshold, + unitSensorUpperWarningThreshold, + unitSensorEnabledThresholds, + unitSensorSignedMaximum, + unitSensorSignedMinimum, + unitSensorSignedLowerCriticalThreshold, + unitSensorSignedLowerWarningThreshold, + unitSensorSignedUpperCriticalThreshold, + unitSensorSignedUpperWarningThreshold, + inletLabel, + inletName, + inletPlug, + inletPoleCount, + inletRatedVoltage, + inletRatedCurrent, + inletDeviceCapabilities, + inletPoleCapabilities, + inletPlugDescriptor, + inletEnableState, + inletPoleLine, + inletPoleNode, + inletSensorLogAvailable, + inletSensorUnits, + inletSensorDecimalDigits, + inletSensorResolution, + inletSensorMaximum, + inletSensorMinimum, + inletSensorHysteresis, + inletSensorStateChangeDelay, + inletSensorLowerCriticalThreshold, + inletSensorLowerWarningThreshold, + inletSensorUpperCriticalThreshold, + inletSensorUpperWarningThreshold, + inletSensorEnabledThresholds, + inletSensorSignedMaximum, + inletSensorSignedMinimum, + inletSensorSignedLowerCriticalThreshold, + inletSensorSignedLowerWarningThreshold, + inletSensorSignedUpperCriticalThreshold, + inletSensorSignedUpperWarningThreshold, + inletPoleSensorLogAvailable, + inletPoleSensorUnits, + inletPoleSensorDecimalDigits, + inletPoleSensorResolution, + inletPoleSensorMaximum, + inletPoleSensorMinimum, + inletPoleSensorHysteresis, + inletPoleSensorStateChangeDelay, + inletPoleSensorLowerCriticalThreshold, + inletPoleSensorLowerWarningThreshold, + inletPoleSensorUpperCriticalThreshold, + inletPoleSensorUpperWarningThreshold, + inletPoleSensorEnabledThresholds, + inletPoleSensorSignedMaximum, + inletPoleSensorSignedMinimum, + inletPoleSensorSignedLowerCriticalThreshold, + inletPoleSensorSignedLowerWarningThreshold, + inletPoleSensorSignedUpperCriticalThreshold, + inletPoleSensorSignedUpperWarningThreshold, + overCurrentProtectorLabel, + overCurrentProtectorName, + overCurrentProtectorType, + overCurrentProtectorRatedCurrent, + overCurrentProtectorCapabilities, + overCurrentProtectorPoleCount, + overCurrentProtectorPoleLine, + overCurrentProtectorPoleInNode, + overCurrentProtectorPoleOutNode, + overCurrentProtectorSensorLogAvailable, + overCurrentProtectorSensorUnits, + overCurrentProtectorSensorDecimalDigits, + overCurrentProtectorSensorResolution, + overCurrentProtectorSensorMaximum, + overCurrentProtectorSensorMinimum, + overCurrentProtectorSensorHysteresis, + overCurrentProtectorSensorStateChangeDelay, + overCurrentProtectorSensorLowerCriticalThreshold, + overCurrentProtectorSensorLowerWarningThreshold, + overCurrentProtectorSensorUpperCriticalThreshold, + overCurrentProtectorSensorUpperWarningThreshold, + overCurrentProtectorSensorEnabledThresholds, + overCurrentProtectorSensorSignedMaximum, + overCurrentProtectorSensorSignedMinimum, + overCurrentProtectorSensorSignedLowerCriticalThreshold, + overCurrentProtectorSensorSignedLowerWarningThreshold, + overCurrentProtectorSensorSignedUpperCriticalThreshold, + overCurrentProtectorSensorSignedUpperWarningThreshold, + overCurrentProtectorPowerSource, + outletLabel, + outletName, + outletReceptacle, + outletPoleCount, + outletRatedVoltage, + outletRatedCurrent, + outletRatedVA, + outletDeviceCapabilities, + outletPoleCapabilities, + outletPowerCyclingPowerOffPeriod, + outletStateOnStartup, + outletUseGlobalPowerCyclingPowerOffPeriod, + outletSwitchable, + outletReceptacleDescriptor, + outletNonCritical, + outletSequenceDelay, + outletPoleLine, + outletPoleNode, + outletSensorLogAvailable, + outletSensorUnits, + outletSensorDecimalDigits, + outletSensorResolution, + outletSensorMaximum, + outletSensorMinimum, + outletSensorHysteresis, + outletSensorStateChangeDelay, + outletSensorLowerCriticalThreshold, + outletSensorLowerWarningThreshold, + outletSensorUpperCriticalThreshold, + outletSensorUpperWarningThreshold, + outletSensorEnabledThresholds, + outletSensorSignedMaximum, + outletSensorSignedMinimum, + outletSensorSignedLowerCriticalThreshold, + outletSensorSignedLowerWarningThreshold, + outletSensorSignedUpperCriticalThreshold, + outletSensorSignedUpperWarningThreshold, + outletPoleSensorLogAvailable, + outletPoleSensorUnits, + outletPoleSensorDecimalDigits, + outletPoleSensorResolution, + outletPoleSensorMaximum, + outletPoleSensorMinimum, + outletPoleSensorHysteresis, + outletPoleSensorStateChangeDelay, + outletPoleSensorLowerCriticalThreshold, + outletPoleSensorLowerWarningThreshold, + outletPoleSensorUpperCriticalThreshold, + outletPoleSensorUpperWarningThreshold, + outletPoleSensorEnabledThresholds, + outletPoleSensorSignedMaximum, + outletPoleSensorSignedMinimum, + outletPoleSensorSignedLowerCriticalThreshold, + outletPoleSensorSignedLowerWarningThreshold, + outletPoleSensorSignedUpperCriticalThreshold, + outletPoleSensorSignedUpperWarningThreshold, + outletPowerSource, + externalSensorType, + externalSensorSerialNumber, + externalSensorName, + externalSensorDescription, + externalSensorXCoordinate, + externalSensorYCoordinate, + externalSensorZCoordinate, + externalSensorChannelNumber, + externalOnOffSensorSubtype, + externalSensorLogAvailable, + externalSensorUnits, + externalSensorDecimalDigits, + externalSensorResolution, + externalSensorMaximum, + externalSensorMinimum, + externalSensorHysteresis, + externalSensorStateChangeDelay, + externalSensorLowerCriticalThreshold, + externalSensorLowerWarningThreshold, + externalSensorUpperCriticalThreshold, + externalSensorUpperWarningThreshold, + externalSensorEnabledThresholds, + externalSensorsZCoordinateUnits, + externalSensorIsActuator, + externalSensorPosition, + externalSensorUseDefaultThresholds, + externalSensorTypeDefaultHysteresis, + externalSensorTypeDefaultStateChangeDelay, + externalSensorTypeDefaultLowerCriticalThreshold, + externalSensorTypeDefaultLowerWarningThreshold, + externalSensorTypeDefaultUpperCriticalThreshold, + externalSensorTypeDefaultUpperWarningThreshold, + externalSensorTypeDefaultEnabledThresholds, + measurementPeriod, + measurementsPerLogEntry, + logSize, + unitDeviceCapabilities, + globalOutletPowerCyclingPowerOffPeriod, + globalOutletStateOnStartup, + relayBehaviorOnPowerLoss, + pduPowerCyclingPowerOffPeriod, + pduDaisychainMemberType, + managedExternalSensorCount, + outletPowerupSequence, + loadShedding, + serverCount, + serverIPAddress, + serverPingEnabled, + inrushGuardDelay, + cascadedDeviceConnected, + synchronizeWithNTPServer, + firstNTPServerAddressType, + firstNTPServerAddress, + secondNTPServerAddressType, + secondNTPServerAddress, + transferSwitchLabel, + transferSwitchName, + transferSwitchPreferredInlet, + transferSwitchPoleCount, + transferSwitchAutoReTransferEnabled, + transferSwitchAutoReTransferWaitTime, + transferSwitchAutoReTransferRequiresPhaseSync, + transferSwitchFrontPanelManualTransferButtonEnabled, + transferSwitchCapabilities, + transferSwitchPoleLine, + transferSwitchPoleIn1Node, + transferSwitchPoleIn2Node, + transferSwitchPoleOutNode, + transferSwitchSensorLogAvailable, + transferSwitchSensorUnits, + transferSwitchSensorDecimalDigits, + transferSwitchSensorResolution, + transferSwitchSensorMaximum, + transferSwitchSensorMinimum, + transferSwitchSensorHysteresis, + transferSwitchSensorStateChangeDelay, + transferSwitchSensorLowerCriticalThreshold, + transferSwitchSensorLowerWarningThreshold, + transferSwitchSensorUpperCriticalThreshold, + transferSwitchSensorUpperWarningThreshold, + transferSwitchSensorEnabledThresholds, + transferSwitchSensorSignedMaximum, + transferSwitchSensorSignedMinimum, + transferSwitchSensorSignedLowerCriticalThreshold, + transferSwitchSensorSignedLowerWarningThreshold, + transferSwitchSensorSignedUpperCriticalThreshold, + transferSwitchSensorSignedUpperWarningThreshold, + transferSwitchPowerSource1, + transferSwitchPowerSource2, + peripheralDevicePackageSerialNumber, + peripheralDevicePackageModel, + peripheralDevicePackageFirmwareVersion, + peripheralDevicePackageMinFirmwareVersion, + peripheralDevicePackageFirmwareTimeStamp, + peripheralDevicePackagePosition, + peripheralDevicePackageState, + deviceCascadeType, + deviceCascadePosition, + peripheralDevicesAutoManagement, + externalSensorAlarmedToNormalDelay, + frontPanelOutletSwitching, + frontPanelRCMSelfTest, + frontPanelActuatorControl, + powerMeterPanelPositions, + powerMeterPanelLayout, + powerMeterPanelNumbering, + powerMeterPhaseCTRating, + powerMeterNeutralCTRating, + powerMeterEarthCTRating, + powerMeterBranchCount, + powerMeterType, + circuitPoleCount, + circuitName, + circuitType, + circuitRatedCurrent, + circuitCTRating, + circuitCapabilities, + circuitPoleCapabilities, + circuitPowerSource, + circuitPolePanelPosition, + circuitPoleCTNumber, + circuitPolePhase, + circuitSensorLogAvailable, + circuitSensorUnits, + circuitSensorDecimalDigits, + circuitSensorResolution, + circuitSensorMaximum, + circuitSensorMinimum, + circuitSensorHysteresis, + circuitSensorStateChangeDelay, + circuitSensorLowerCriticalThreshold, + circuitSensorLowerWarningThreshold, + circuitSensorUpperCriticalThreshold, + circuitSensorUpperWarningThreshold, + circuitSensorEnabledThresholds, + circuitSensorSignedMaximum, + circuitSensorSignedMinimum, + circuitSensorSignedLowerCriticalThreshold, + circuitSensorSignedLowerWarningThreshold, + circuitSensorSignedUpperCriticalThreshold, + circuitSensorSignedUpperWarningThreshold, + circuitPoleSensorLogAvailable, + circuitPoleSensorUnits, + circuitPoleSensorDecimalDigits, + circuitPoleSensorResolution, + circuitPoleSensorMaximum, + circuitPoleSensorMinimum, + circuitPoleSensorHysteresis, + circuitPoleSensorStateChangeDelay, + circuitPoleSensorLowerCriticalThreshold, + circuitPoleSensorLowerWarningThreshold, + circuitPoleSensorUpperCriticalThreshold, + circuitPoleSensorUpperWarningThreshold, + circuitPoleSensorEnabledThresholds, + circuitPoleSensorSignedMaximum, + circuitPoleSensorSignedMinimum, + circuitPoleSensorSignedLowerCriticalThreshold, + circuitPoleSensorSignedLowerWarningThreshold, + circuitPoleSensorSignedUpperCriticalThreshold, + circuitPoleSensorSignedUpperWarningThreshold, + activeDNSServerAddressType, + activeDNSServerAddress, + activeDNSServerCount, + activeNTPServerAddressType, + activeNTPServerAddress, + activeNTPServerCount } + STATUS current + DESCRIPTION + "A collection of objects representing configuration data." + ::= { groups 1 } + +ipAddressGroup OBJECT-GROUP + OBJECTS { pxIPAddress, + netmask, + gateway, + pxInetAddressType, + pxInetIPAddress, + pxInetNetmask, + pxInetGateway } + STATUS deprecated + DESCRIPTION + "A collection of objects representing configuration data." + ::= { groups 12 } + +obsoleteObjectsGroup OBJECT-GROUP + OBJECTS { useDHCPProvidedNTPServer, + inletRCMResidualOperatingCurrent } + STATUS obsolete + DESCRIPTION + "A collection of obsolete objects." + ::= { groups 20 } + +oldConfigGroup OBJECT-GROUP + OBJECTS { outletSequencingDelay, + unitSensorAccuracy, + unitSensorTolerance, + inletSensorAccuracy, + inletSensorTolerance, + inletPoleSensorAccuracy, + inletPoleSensorTolerance, + outletSensorAccuracy, + outletSensorTolerance, + outletPoleSensorAccuracy, + outletPoleSensorTolerance, + overCurrentProtectorSensorAccuracy, + overCurrentProtectorSensorTolerance, + externalSensorAccuracy, + externalSensorTolerance, + wireSensorAccuracy, + wireSensorTolerance, + transferSwitchSensorAccuracy, + transferSwitchSensorTolerance, + wireCount, + wireLabel, + wireCapabilities, + wireSensorLogAvailable, + wireSensorUnits, + wireSensorDecimalDigits, + wireSensorResolution, + wireSensorMaximum, + wireSensorMinimum, + wireSensorHysteresis, + wireSensorStateChangeDelay, + wireSensorLowerCriticalThreshold, + wireSensorLowerWarningThreshold, + wireSensorUpperCriticalThreshold, + wireSensorUpperWarningThreshold, + wireSensorEnabledThresholds, + wirePowerSource, + inletRatedFrequency, + inletRatedVA, + pxMACAddress, + networkInterfaceType, + activeDNSServerAddressSource, + activeNTPServerAddressSource } + STATUS deprecated + DESCRIPTION + "A collection of objects representing old (deprecated) configuration data." + ::= { groups 13 } + +logGroup OBJECT-GROUP + OBJECTS { dataLogging, + oldestLogID, + newestLogID, + logTimeStamp, + dataLoggingEnableForAllSensors, + logUnitSensorDataAvailable, + logUnitSensorState, + logUnitSensorAvgValue, + logUnitSensorMaxValue, + logUnitSensorMinValue, + logUnitSensorSignedAvgValue, + logUnitSensorSignedMaxValue, + logUnitSensorSignedMinValue, + logInletSensorDataAvailable, + logInletSensorState, + logInletSensorAvgValue, + logInletSensorMaxValue, + logInletSensorMinValue, + logInletSensorSignedAvgValue, + logInletSensorSignedMaxValue, + logInletSensorSignedMinValue, + logInletPoleSensorDataAvailable, + logInletPoleSensorState, + logInletPoleSensorAvgValue, + logInletPoleSensorMaxValue, + logInletPoleSensorMinValue, + logInletPoleSensorSignedAvgValue, + logInletPoleSensorSignedMaxValue, + logInletPoleSensorSignedMinValue, + logOutletSensorDataAvailable, + logOutletSensorState, + logOutletSensorAvgValue, + logOutletSensorMaxValue, + logOutletSensorMinValue, + logOutletSensorSignedAvgValue, + logOutletSensorSignedMaxValue, + logOutletSensorSignedMinValue, + logOutletPoleSensorDataAvailable, + logOutletPoleSensorState, + logOutletPoleSensorAvgValue, + logOutletPoleSensorMaxValue, + logOutletPoleSensorMinValue, + logOutletPoleSensorSignedAvgValue, + logOutletPoleSensorSignedMaxValue, + logOutletPoleSensorSignedMinValue, + logOverCurrentProtectorSensorDataAvailable, + logOverCurrentProtectorSensorState, + logOverCurrentProtectorSensorAvgValue, + logOverCurrentProtectorSensorMaxValue, + logOverCurrentProtectorSensorMinValue, + logOverCurrentProtectorSensorSignedAvgValue, + logOverCurrentProtectorSensorSignedMaxValue, + logOverCurrentProtectorSensorSignedMinValue, + logExternalSensorDataAvailable, + logExternalSensorState, + logExternalSensorAvgValue, + logExternalSensorMaxValue, + logExternalSensorMinValue, + logTransferSwitchSensorDataAvailable, + logTransferSwitchSensorState, + logTransferSwitchSensorAvgValue, + logTransferSwitchSensorMaxValue, + logTransferSwitchSensorMinValue, + logTransferSwitchSensorSignedAvgValue, + logTransferSwitchSensorSignedMaxValue, + logTransferSwitchSensorSignedMinValue, + logCircuitSensorDataAvailable, + logCircuitSensorState, + logCircuitSensorAvgValue, + logCircuitSensorMaxValue, + logCircuitSensorMinValue, + logCircuitSensorSignedAvgValue, + logCircuitSensorSignedMaxValue, + logCircuitSensorSignedMinValue, + logCircuitPoleSensorDataAvailable, + logCircuitPoleSensorState, + logCircuitPoleSensorAvgValue, + logCircuitPoleSensorMaxValue, + logCircuitPoleSensorMinValue, + logCircuitPoleSensorSignedAvgValue, + logCircuitPoleSensorSignedMaxValue, + logCircuitPoleSensorSignedMinValue } + STATUS current + DESCRIPTION + "A collection of objects providing logging (history of readings) capabilities + about the PDU." + ::= { groups 2 } + +oldLogGroup OBJECT-GROUP + OBJECTS { logWireSensorDataAvailable, + logWireSensorState, + logWireSensorAvgValue, + logWireSensorMaxValue, + logWireSensorMinValue } + STATUS deprecated + DESCRIPTION + "A collection of objects representing old (deprecated) logging data." + ::= { groups 14 } + +measurementsGroup OBJECT-GROUP + OBJECTS { measurementsUnitSensorIsAvailable, + measurementsUnitSensorState, + measurementsUnitSensorValue, + measurementsUnitSensorTimeStamp, + measurementsUnitSensorSignedValue, + measurementsInletSensorIsAvailable, + measurementsInletSensorState, + measurementsInletSensorValue, + measurementsInletSensorTimeStamp, + measurementsInletSensorSignedValue, + measurementsInletPoleSensorIsAvailable, + measurementsInletPoleSensorState, + measurementsInletPoleSensorValue, + measurementsInletPoleSensorTimeStamp, + measurementsInletPoleSensorSignedValue, + measurementsOutletSensorIsAvailable, + measurementsOutletSensorState, + measurementsOutletSensorValue, + measurementsOutletSensorTimeStamp, + measurementsOutletSensorSignedValue, + measurementsOutletPoleSensorIsAvailable, + measurementsOutletPoleSensorState, + measurementsOutletPoleSensorValue, + measurementsOutletPoleSensorTimeStamp, + measurementsOutletPoleSensorSignedValue, + measurementsOverCurrentProtectorSensorIsAvailable, + measurementsOverCurrentProtectorSensorState, + measurementsOverCurrentProtectorSensorValue, + measurementsOverCurrentProtectorSensorTimeStamp, + measurementsOverCurrentProtectorSensorSignedValue, + measurementsExternalSensorIsAvailable, + measurementsExternalSensorState, + measurementsExternalSensorValue, + measurementsExternalSensorTimeStamp, + measurementsTransferSwitchSensorIsAvailable, + measurementsTransferSwitchSensorState, + measurementsTransferSwitchSensorValue, + measurementsTransferSwitchSensorTimeStamp, + measurementsTransferSwitchSensorSignedValue, + measurementsCircuitSensorIsAvailable, + measurementsCircuitSensorState, + measurementsCircuitSensorValue, + measurementsCircuitSensorTimeStamp, + measurementsCircuitSensorSignedValue, + measurementsCircuitPoleSensorIsAvailable, + measurementsCircuitPoleSensorState, + measurementsCircuitPoleSensorValue, + measurementsCircuitPoleSensorTimeStamp, + measurementsCircuitPoleSensorSignedValue } + STATUS current + DESCRIPTION + "A collection of objects providing measurements (most recent data) capabilities. + about the PDU." + ::= { groups 3 } + +oldMeasurementsGroup OBJECT-GROUP + OBJECTS { measurementsWireSensorIsAvailable, + measurementsWireSensorState, + measurementsWireSensorValue, + measurementsWireSensorTimeStamp } + STATUS deprecated + DESCRIPTION + "A collection of objects representing old (deprecated) measurement data." + ::= { groups 15 } + +controlGroup OBJECT-GROUP + OBJECTS { switchingOperation, + outletSwitchingState, + outletSwitchingTimeStamp, + transferSwitchActiveInlet, + transferSwitchTransferToInlet, + transferSwitchAlarmOverride, + transferSwitchLastTransferReason, + actuatorState, + rcmState, + inletSensorResetValue, + outletSensorResetValue, + unitSensorResetValue, + circuitSensorResetValue } + STATUS current + DESCRIPTION + "A collection of objects providing the ability to control various components + of a PDU." + ::= { groups 4 } + +trapInformationGroup OBJECT-GROUP + OBJECTS { userName, + targetUser, + imageVersion, + roleName, + oldSensorState, + pduNumber, + inletPoleNumber, + outletPoleNumber, + externalSensorNumber, + typeOfSensor, + smtpMessageRecipients, + smtpServer, + errorDescription, + deviceChangedParameter, + changedParameterNewValue, + lhxSupportEnabled, + webcamModel, + webcamConnectionPort, + agentInetPortNumber, + peripheralDeviceRomcode, + peripheralDeviceFirmwareUpdateState, + circuitNumber, + circuitPoleNumber, + phoneNumber, + smartCardReaderId, + smartCardTimestamp, + smartCardType, + smartCardId, + suspectedTripCauseLabel } + STATUS current + DESCRIPTION + "A collection of objects providing information in the traps." + ::= { groups 5 } + +trapsGroup NOTIFICATION-GROUP + NOTIFICATIONS { systemStarted, + systemReset, + userLogin, + userLogout, + userAuthenticationFailure, + userSessionTimeout, + userAdded, + userModified, + userDeleted, + roleAdded, + roleModified, + roleDeleted, + deviceUpdateStarted, + deviceUpdateCompleted, + userBlocked, + powerControl, + userPasswordChanged, + passwordSettingsChanged, + firmwareValidationFailed, + logFileCleared, + bulkConfigurationSaved, + bulkConfigurationCopied, + inletSensorStateChange, + inletPoleSensorStateChange, + outletSensorStateChange, + outletPoleSensorStateChange, + overCurrentProtectorSensorStateChange, + externalSensorStateChange, + smtpMessageTransmissionFailure, + ldapError, + deviceUpdateFailed, + loadSheddingModeEntered, + loadSheddingModeExited, + pingServerEnabled, + pingServerDisabled, + serverNotReachable, + serverReachable, + deviceIdentificationChanged, + usbSlaveConnected, + usbSlaveDisconnected, + lhxSupportChanged, + userAcceptedRestrictedServiceAgreement, + userDeclinedRestrictedServiceAgreement, + transferSwitchSensorStateChange, + deviceSettingsSaved, + deviceSettingsRestored, + webcamInserted, + webcamRemoved, + inletEnabled, + inletDisabled, + serverConnectivityUnrecoverable, + radiusError, + serverReachabilityError, + inletSensorReset, + outletSensorReset, + unitSensorReset, + circuitSensorReset, + unknownPeripheralDeviceAttached, + peripheralDeviceFirmwareUpdate, + unitSensorStateChange, + circuitSensorStateChange, + circuitPoleSensorStateChange, + circuitAdded, + circuitDeleted, + circuitModified, + powerMeterAdded, + powerMeterDeleted, + powerMeterModified, + smsMessageTransmissionFailure, + smartCardInserted, + smartCardRemoved } + STATUS current + DESCRIPTION + "A collection of traps." + ::= { groups 9 } + +oldTrapsGroup NOTIFICATION-GROUP + NOTIFICATIONS { wireSensorStateChange, + pduSensorStateChange, + rfCodeTagConnected, + rfCodeTagDisconnected } + STATUS deprecated + DESCRIPTION + "A collection of objects representing old (deprecated) traps." + ::= { groups 16 } + +reliabilityGroup OBJECT-GROUP + OBJECTS { reliabilityId, + reliabilityDataValue, + reliabilityDataMaxPossible, + reliabilityDataWorstValue, + reliabilityDataThreshold, + reliabilityDataRawUpperBytes, + reliabilityDataRawLowerBytes, + reliabilityDataFlags, + reliabilityErrorLogId, + reliabilityErrorLogValue, + reliabilityErrorLogThreshold, + reliabilityErrorLogRawUpperBytes, + reliabilityErrorLogRawLowerBytes, + reliabilityErrorLogPOH, + reliabilityErrorLogTime, + reliabilityDataTableSequenceNumber } + STATUS current + DESCRIPTION + "A collection of objects providing reliability data." + ::= { groups 10 } + +-- Textual Conventions + +SensorTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The types a sensor can be." + SYNTAX INTEGER { rmsCurrent(1), + peakCurrent(2), + unbalancedCurrent(3), + rmsVoltage(4), + activePower(5), + apparentPower(6), + powerFactor(7), + activeEnergy(8), + apparentEnergy(9), + temperature(10), + humidity(11), + airFlow(12), + airPressure(13), + onOff(14), + trip(15), + vibration(16), + waterDetection(17), + smokeDetection(18), + binary(19), + contact(20), + fanSpeed(21), + surgeProtectorStatus(22), + frequency(23), + phaseAngle(24), + rmsVoltageLN(25), + residualCurrent(26), + rcmState(27), + absoluteHumidity(28), + reactivePower(29), + other(30), + none(31), + powerQuality(32), + overloadStatus(33), + overheatStatus(34), + displacementPowerFactor(35), + fanStatus(37), + inletPhaseSyncAngle(38), + inletPhaseSync(39), + operatingState(40), + activeInlet(41), + illuminance(42), + doorContact(43), + tamperDetection(44), + motionDetection(45), + i1smpsStatus(46), + i2smpsStatus(47), + switchStatus(48), + doorLockState(49), + doorHandleLock(50) } + +SensorStateEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The states a sensor can be in." + SYNTAX INTEGER { unavailable(-1), + open(0), + closed(1), + belowLowerCritical(2), + belowLowerWarning(3), + normal(4), + aboveUpperWarning(5), + aboveUpperCritical(6), + on(7), + off(8), + detected(9), + notDetected(10), + alarmed(11), + ok(12), + fail(14), + yes(15), + no(16), + standby(17), + one(18), + two(19), + inSync(20), + outOfSync(21), + i1OpenFault(22), + i1ShortFault(23), + i2OpenFault(24), + i2ShortFault(25), + fault(26), + warning(27), + critical(28), + selfTest(29), + nonRedundant(30) } + +-- Possible Sensor States for each Sensor Type +-- This comment must be updated whenever a new sensor type is added. +-- Sensor Type Sensor States +-- rmsCurrent unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- peakCurrent unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- unbalancedCurrent unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- rmsVoltage unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- activePower unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- apparentPower unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- powerFactor unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- activeEnergy unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- apparentEnergy unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- temperature unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- humidity unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- airFlow unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- airPressure unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- onOff unavailable,on,off +-- trip unavailable,open,closed +-- vibration unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- waterDetection unavailable,normal,alarmed +-- smokeDetection unavailable,normal,alarmed +-- binary unavailable,normal,alarmed +-- contact unavailable,normal,alarmed +-- fanSpeed unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- surgeProtectorStatus unavailable,ok,fault +-- frequency unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- phaseAngle unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- powerQuality unavailable,normal,warning,critical +-- overloadStatus unavailable,ok,fault +-- overheatStatus unavailable,ok,fault +-- fanStatus unavailable,ok,fault +-- residualCurrent unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- rcmState unavailable,normal,warning,critical,selfTest,fail +-- reactivePower unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- inletPhaseSyncAngle unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- inletPhaseSync unavailable,inSync,outOfSync +-- operatingState unavailable,normal,standby,nonRedundant,off +-- activeInlet unavailable,one,two,off +-- illuminance unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- doorContact unavailable,open,closed +-- tamperDetection unavailable,normal,alarmed +-- motionDetection unavailable,?? +-- i1smpsStatus unavailable,ok,fault +-- i2smpsStatus unavailable,ok,fault +-- switchStatus unavailable,ok,i1OpenFault,i1ShortFault,i2OpenFault,i2ShortFault +-- displacementPowerFactor unavailable,belowLowerCritical,belowLowerWarning,normal,aboveUpperWarning,aboveUpperCritical +-- doorLockState unavailable,open,closed +-- doorHandleLock unavailable,open,closed +-- doorHandleSwitch unavailable,open,closed + + +PlugTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The types of inlet plug." + SYNTAX INTEGER { plugOTHER(-1), + plugNONE(0), + plug56P320(1), + plug56P520(2), + plug56P532(3), + plugCS8365C(4), + plugIEC320C14(5), + plugIEC320C20(6), + plugIEC603093WIRE250V16A(7), + plugIEC603093WIRE250V20A(8), + plugIEC603093WIRE250V30A(9), + plugIEC603093WIRE250V32A(10), + plugIEC603093WIRE250V60A(11), + plugIEC603093WIRE250V63A(12), + plugIEC603093WIRE250V100A(13), + plugIEC603093WIRE250V125A(14), + plugIEC603094WIRE250V20A(15), + plugIEC603094WIRE250V30A(16), + plugIEC603094WIRE250V60A(17), + plugIEC603094WIRE250V100A(18), + plugIEC603095WIRE208V20A(23), + plugIEC603095WIRE208V30A(24), + plugIEC603095WIRE208V60A(25), + plugIEC603095WIRE208V100A(26), + plugIEC603095WIRE415V16A(27), + plugIEC603095WIRE415V32A(28), + plugIEC603095WIRE415V63A(29), + plugIEC603095WIRE415V125A(30), + plugIEC603095WIRE480V20A(31), + plugIEC603095WIRE480V30A(32), + plugIEC603095WIRE480V60A(33), + plugIEC603095WIRE480V100A(34), + plugNEMA515P(35), + plugNEMAL515P(36), + plugNEMA520P(37), + plugNEMAL520P(38), + plugNEMAL530P(39), + plugNEMAL615P(40), + plugNEMAL620P(41), + plugNEMAL630P(42), + plugNEMAL1520P(43), + plugNEMAL1530P(44), + plugNEMAL2120P(45), + plugNEMAL2130P(46), + plugNEMAL2230P(47), + plug56P320F(48), + plug56PA320(49) } + +ReceptacleTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The types of outlet receptacle." + SYNTAX INTEGER { receptacleOTHER(-1), + receptacleNONE(0), + receptacleBS1363(1), + receptacle56P532(3), + receptacleCS8364C(4), + receptacleIEC320C13(5), + receptacleIEC320C19(6), + receptacleIEC603093WIRE250V16A(7), + receptacleIEC603093WIRE250V20A(8), + receptacleIEC603093WIRE250V30A(9), + receptacleIEC603093WIRE250V32A(10), + receptacleIEC603093WIRE250V60A(11), + receptacleIEC603093WIRE250V63A(12), + receptacleIEC603093WIRE250V100A(13), + receptacleIEC603093WIRE250V125A(14), + receptacleIEC603094WIRE250V20A(15), + receptacleIEC603094WIRE250V30A(16), + receptacleIEC603094WIRE250V60A(17), + receptacleIEC603094WIRE250V100A(18), + receptacleIEC603095WIRE208V20A(23), + receptacleIEC603095WIRE208V30A(24), + receptacleIEC603095WIRE208V60A(25), + receptacleIEC603095WIRE208V100A(26), + receptacleIEC603095WIRE415V16A(27), + receptacleIEC603095WIRE415V32A(28), + receptacleIEC603095WIRE415V63A(29), + receptacleIEC603095WIRE415V125A(30), + receptacleIEC603095WIRE480V20A(31), + receptacleIEC603095WIRE480V30A(32), + receptacleIEC603095WIRE480V60A(33), + receptacleIEC603095WIRE480V100A(34), + receptacleNEMA515R(35), + receptacleNEMAL515R(36), + receptacleNEMA520R(37), + receptacleNEMAL520R(38), + receptacleNEMAL530R(39), + receptacleNEMAL615R(40), + receptacleNEMAL620R(41), + receptacleNEMAL630R(42), + receptacleNEMAL1520R(43), + receptacleNEMAL1530R(44), + receptacleNEMAL2120RP(45), + receptacleNEMAL2130R(46), + receptacleSCHUKOTYPEE(47), + receptacleSCHUKOTYPEF(48) } + +OverCurrentProtectorTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The types of overcurrent protectors." + SYNTAX INTEGER { ocpBREAKER1POLE(1), + ocpBREAKER2POLE(2), + ocpBREAKER3POLE(3), + ocpFUSE(4), + ocpFUSEPAIR(5), + ocpRCBO2POLE(6), + ocpRCBO3POLE(7), + ocpRCBO4POLE(8) } + +BoardTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The types of boards." + SYNTAX INTEGER { mainController(1), + inletController(2), + outletController(3), + meteringController(4) } + +OutletSwitchingOperationsEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The switching operations on an outlet." + SYNTAX INTEGER { off(0), + on(1), + cycle(2) } + +SensorUnitsEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The sensor units." + SYNTAX INTEGER { none(-1), + other(0), + volt(1), + amp(2), + watt(3), + voltamp(4), + wattHour(5), + voltampHour(6), + degreeC(7), + hertz(8), + percent(9), + meterpersec(10), + pascal(11), + psi(12), + g(13), + degreeF(14), + feet(15), + inches(16), + cm(17), + meters(18), + rpm(19), + degrees(20), + lux(21), + grampercubicmeter(22), + var(23) } + +DaisychainMemberTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The daisy chain member type." + SYNTAX INTEGER { standalone(0), + master(1), + slave(2) } + +URL ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "A Uniform Resource Locator (URL), as defined in RFC1738." + SYNTAX OCTET STRING (SIZE (0..255)) + +GlobalOutletStateOnStartupEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The global outlet state on device start up; can be overridden per outlet." + SYNTAX INTEGER { off(0), + on(1), + lastKnownState(2) } + +OutletStateOnStartupEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The outlet state on device start up; this overrides the global value." + SYNTAX INTEGER { off(0), + on(1), + lastKnownState(2), + globalOutletStateOnStartup(3) } + +ExternalSensorsZCoordinateUnitsEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The units of the external sensor Z coordinate. + rackUnits implies that the Z coordinate for all external sensors + is in rack units (U) + text implies that the Z coordinate for all external sensors + is a text string (label)" + SYNTAX INTEGER { rackUnits(0), + text(1) } + +HundredthsOfAPercentage ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Data type for reporting values in hundredths of percentage, i.e. 0.01 %." + SYNTAX Unsigned32 (0..10000) + +DeviceIdentificationParameterEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The configurable parameters." + SYNTAX INTEGER { pduName(0), + sysContact(1), + sysName(2), + sysLocation(3) } + +TransferSwitchTransferReasonEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Transfer Switch Transfer Reason" + SYNTAX INTEGER { unknown(0), + startup(1), + manualTransfer(2), + automaticReTransfer(3), + powerFailure(4), + powerQuality(5), + overloadAlarm(6), + overheatAlarm(7), + internalFailure(8) } + +ProductTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The product types." + SYNTAX INTEGER { rackPdu(0), + bcm(1), + transferSwitch(2), + powerMeter(3) } + +RelayPowerLossBehaviorEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The type of relay behavior on power loss." + SYNTAX INTEGER { nonLatching(0), + latching(1) } + +DeviceCascadeTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The type of configured cascading on this device." + SYNTAX INTEGER { bridging(0), + portForwarding(1), + none(2) } + +PeripheralDeviceFirmwareUpdateStateEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The state of a peripheral device firmware update." + SYNTAX INTEGER { started(1), + successful(2), + failed(3) } + +PanelLayoutEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The panel circuit position layout." + SYNTAX INTEGER { invalid(-1), + oneColumn(1), + twoColumns(2) } + +PanelNumberingEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The panel circuit position numbering scheme." + SYNTAX INTEGER { invalid(-1), + oddEven(1), + sequential(2) } + +CircuitTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The panel circuit types." + SYNTAX INTEGER { onePhaseLL(1), + onePhaseLN(2), + onePhaseLLN(3), + threePhase(4) } + +PhaseEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The power phase." + SYNTAX INTEGER { phaseA(1), + phaseB(2), + phaseC(3), + neutral(4), + earth(5) } + +LineEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The Lines: L1, L2, L3, N." + SYNTAX INTEGER { lineL1(1), + lineL2(2), + lineL3(3), + lineNeutral(4) } + +PowerMeterTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The power meter types" + SYNTAX INTEGER { singlePhase(1), + splitPhase(2), + threePhase(3) } + +NetworkInterfaceTypeEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The type of network interface." + SYNTAX INTEGER { wired(0), + wireless(1) } + +AddressSourceEnumeration ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "How was the address obtained?" + SYNTAX INTEGER { static(1), + dhcp(2), + dhcpv6(3) } + +-- Global OIDs + +pduCount OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of PDUs managed by this MIB. + + For PX2, PX3 and PX3TS, pduCount is always 1 + For BCM2, pduCount is the number of power meters plus 1 (for the main controller)" + ::= { configuration 1 } + +-- nameplateTable: PDU nameplate information + +nameplateTable OBJECT-TYPE + SYNTAX SEQUENCE OF NameplateEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of PDU nameplate entries. The number of + entries is given by the value of pduCount." + ::= { unit 1 } + +nameplateEntry OBJECT-TYPE + SYNTAX NameplateEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry providing PDU nameplate information." + INDEX { pduId } + ::= { nameplateTable 1 } + +NameplateEntryStruct ::= SEQUENCE { + pduId Integer32, + pduManufacturer DisplayString, + pduModel DisplayString, + pduSerialNumber DisplayString, + pduRatedVoltage DisplayString, + pduRatedCurrent DisplayString, + pduRatedFrequency DisplayString, + pduRatedVA DisplayString, + pduImage URL + } + +pduId OBJECT-TYPE + SYNTAX Integer32(0..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each PDU or power meter. + + For PX2, PX3 and PX3TS, pduId is always 1 + For BCM2, pduId can be: + - 0 for the main controller + - The meter ID (rotary switch) for power meter" + ::= { nameplateEntry 1 } + +pduManufacturer OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PDU manufacturer." + ::= { nameplateEntry 2 } + +pduModel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PDU model name." + ::= { nameplateEntry 3 } + +pduSerialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PDU serial number." + ::= { nameplateEntry 4 } + +pduRatedVoltage OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PDU voltage rating." + ::= { nameplateEntry 5 } + +pduRatedCurrent OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PDU current rating." + ::= { nameplateEntry 6 } + +pduRatedFrequency OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PDU frequency rating." + ::= { nameplateEntry 7 } + +pduRatedVA OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PDU VA (VoltAmps) rating." + ::= { nameplateEntry 8 } + +pduImage OBJECT-TYPE + SYNTAX URL + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The URL of the wiring diagram for this PDU." + ::= { nameplateEntry 9 } + +-- unitConfigurationTable: PDU configuration and settings + +unitConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF UnitConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of PDU configuration entries. The number of + entries is given by the value of pduCount." + ::= { unit 2 } + +unitConfigurationEntry OBJECT-TYPE + SYNTAX UnitConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing configuration objects for a particular PDU." + INDEX { pduId } + ::= { unitConfigurationTable 1 } + +UnitConfigurationEntryStruct ::= SEQUENCE { + inletCount Integer32, + overCurrentProtectorCount Integer32, + outletCount Integer32, + inletControllerCount Integer32, + outletControllerCount Integer32, + externalSensorCount Integer32, + pxIPAddress IpAddress, + netmask IpAddress, + gateway IpAddress, + pxMACAddress MacAddress, + utcOffset DisplayString, + pduName DisplayString, + networkInterfaceType NetworkInterfaceTypeEnumeration, + externalSensorsZCoordinateUnits ExternalSensorsZCoordinateUnitsEnumeration, + unitDeviceCapabilities BITS, + outletSequencingDelay Unsigned32, + globalOutletPowerCyclingPowerOffPeriod Unsigned32, + globalOutletStateOnStartup GlobalOutletStateOnStartupEnumeration, + outletPowerupSequence DisplayString, + pduPowerCyclingPowerOffPeriod Unsigned32, + pduDaisychainMemberType DaisychainMemberTypeEnumeration, + managedExternalSensorCount Integer32, + pxInetAddressType InetAddressType, + pxInetIPAddress InetAddress, + pxInetNetmask InetAddress, + pxInetGateway InetAddress, + loadShedding TruthValue, + serverCount Integer32, + inrushGuardDelay Unsigned32, + cascadedDeviceConnected TruthValue, + synchronizeWithNTPServer TruthValue, + useDHCPProvidedNTPServer TruthValue, + firstNTPServerAddressType InetAddressType, + firstNTPServerAddress InetAddress, + secondNTPServerAddressType InetAddressType, + secondNTPServerAddress InetAddress, + wireCount Integer32, + transferSwitchCount Integer32, + productType ProductTypeEnumeration, + meteringControllerCount Integer32, + relayBehaviorOnPowerLoss RelayPowerLossBehaviorEnumeration, + deviceCascadeType DeviceCascadeTypeEnumeration, + deviceCascadePosition Integer32, + peripheralDevicesAutoManagement TruthValue, + frontPanelOutletSwitching TruthValue, + frontPanelRCMSelfTest TruthValue, + frontPanelActuatorControl TruthValue, + circuitCount Integer32, + activeDNSServerCount Integer32, + activeNTPServerCount Integer32 + } + +inletCount OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of inlets." + ::= { unitConfigurationEntry 2 } + +overCurrentProtectorCount OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of overcurrent protectors." + ::= { unitConfigurationEntry 3 } + +outletCount OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of outlets." + ::= { unitConfigurationEntry 4 } + +inletControllerCount OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of inlet controllers." + ::= { unitConfigurationEntry 5 } + +outletControllerCount OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of outlet controllers." + ::= { unitConfigurationEntry 6 } + +externalSensorCount OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum supported number of external sensors. This value is + fixed and does not reflect how many sensors are actually connected." + ::= { unitConfigurationEntry 7 } + +pxIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current IP address. A value of 0.0.0.0 indicates an error + or an unset option." + ::= { unitConfigurationEntry 8 } + +netmask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current netmask. A value of 0.0.0.0 indicates an error + or an unset option." + ::= { unitConfigurationEntry 9 } + +gateway OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current gateway. A value of 0.0.0.0 indicates an error + or an unset option." + ::= { unitConfigurationEntry 10 } + +pxMACAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current MAC address. + If bridge interface is enabled, then equal to the MAC address of Ethernet 1 + else if Ethernet 1 is enabled, then equal to the MAC address of Ethernet 1 + else if Ethernet 2 is enabled, then equal to the MAC address of Ethernet 2 + else if Wlan is enabled, then equal to the MAC address of Wlan + else return SNMP_ERR_NOSUCHNAME" + ::= { unitConfigurationEntry 11 } + +utcOffset OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current UTC offset." + ::= { unitConfigurationEntry 12 } + +pduName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user-defined name for the PDU." + ::= { unitConfigurationEntry 13 } + +networkInterfaceType OBJECT-TYPE + SYNTAX NetworkInterfaceTypeEnumeration + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The network interface type: wired or wireless. + If only the Wireless interface is enabled, then equal to wireless + else equal to wired" + ::= { unitConfigurationEntry 14 } + +externalSensorsZCoordinateUnits OBJECT-TYPE + SYNTAX ExternalSensorsZCoordinateUnitsEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "External sensor Z coordinate units: freeform text or rack units (U) + Default is U." + ::= { unitConfigurationEntry 34 } + +unitDeviceCapabilities OBJECT-TYPE + SYNTAX BITS{ i1smpsStatus(45), + i2smpsStatus(46) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit string indicating which unit sensors are available." + ::= { unitConfigurationEntry 35 } + +outletSequencingDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "It is deprecated. This is an alias for inrushGuardDelay" + ::= { unitConfigurationEntry 36 } + +globalOutletPowerCyclingPowerOffPeriod OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The power-off period when an outlet is cycled; + applies to all outlets unless overridden at the outlet level; + specified in seconds; + 1 <= value <= 3600 seconds." + ::= { unitConfigurationEntry 37 } + +globalOutletStateOnStartup OBJECT-TYPE + SYNTAX GlobalOutletStateOnStartupEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The outlet state on device startup; applies to all outlets + unless overridden at the outlet level. + Note that this value is ignored if relayBehaviorOnPowerLoss is set to latching." + ::= { unitConfigurationEntry 38 } + +outletPowerupSequence OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The sequence in which will the outlets will be switched on under the following conditions. + 1) Switch all outlets on operation is executed + 2) Power to the PDU is cycled + String must consist of a comma separated sequence of the outlet numbers and + all outlet numbers must be included. The numbers entered must be a permutation of the numbers + 1,2,3,-outletnumber. + Example for a 12 outlet PDU: 1,12,3,5,6,7,10,2,4,11,9,8. + + The per outlet sequence delays are defined as outletSequenceDelay in the outletConfigurationTable" + ::= { unitConfigurationEntry 39 } + +pduPowerCyclingPowerOffPeriod OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When power to the PX is cycled (either manually or because of a + temporary power loss), this number determines how many seconds the + PX will wait before it provides power to the outlets. + specified in seconds: + 1 <= value <= 3600 seconds. + Note that this value is ignored if relayBehaviorOnPowerLoss is set to latching." + ::= { unitConfigurationEntry 40 } + +pduDaisychainMemberType OBJECT-TYPE + SYNTAX DaisychainMemberTypeEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The daisy chain member type." + ::= { unitConfigurationEntry 41 } + +managedExternalSensorCount OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of managed external sensors" + ::= { unitConfigurationEntry 42 } + +pxInetAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The type of address format + This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293)." + ::= { unitConfigurationEntry 50 } + +pxInetIPAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current IP address. A value of 0.0.0.0 indicates an error + or an unset option. + This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293). + For IPv6, its value is 0.0.0.0" + ::= { unitConfigurationEntry 51 } + +pxInetNetmask OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current netmask. A value of 0.0.0.0 indicates an error + or an unset option. + This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293). + For IPv6, its value is 0.0.0.0" + ::= { unitConfigurationEntry 52 } + +pxInetGateway OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current gateway. A value of 0.0.0.0 indicates an error + or an unset option. + This object is deprecated in favor of ipAddressTable from the IP-MIB (rfc4293). + For IPv6, its value is 0.0.0.0" + ::= { unitConfigurationEntry 53 } + +loadShedding OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enter/Exit Load Shedding Mode" + ::= { unitConfigurationEntry 55 } + +serverCount OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of servers monitored with the server reachability feature" + ::= { unitConfigurationEntry 56 } + +inrushGuardDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The time interval between switching on two outlets; + specified in milliseconds; + 100 <= value <= 100000 milliseconds." + ::= { unitConfigurationEntry 57 } + +cascadedDeviceConnected OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether another PX2 is connected using an USB cable to + the USB-A port of this PX2 in a cascaded configuration." + ::= { unitConfigurationEntry 58 } + +synchronizeWithNTPServer OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether time is synchronized with an NTP server." + ::= { unitConfigurationEntry 59 } + +useDHCPProvidedNTPServer OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "**NOTE: This object is obsolete. Its functionality has been replaced + by the following: + - If at least one of firstNTPServerAddress and secondNTPServerAddress + has been configured then use the static NTP servers + - else use the DHCP-provided NTP servers" + ::= { unitConfigurationEntry 60 } + +firstNTPServerAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents the type of the corresponding instance + of firstNTPServerAddress object. When setting this value, + be sure that firstNTPServerAddress is of this address type, + e.g. by setting both of them." + DEFVAL { ipv4 } + ::= { unitConfigurationEntry 61 } + +firstNTPServerAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The address of the primary NTP server. + When setting this value, be sure that it + is of the type specified in firstNTPServerAddressType, + e.g. by setting both of them." + ::= { unitConfigurationEntry 62 } + +secondNTPServerAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents the type of the corresponding instance + of secondNTPServerAddress object. When setting this value, + be sure that secondNTPServerAddress is of this address type, + e.g. by setting both of them. + Default is ipv4" + ::= { unitConfigurationEntry 63 } + +secondNTPServerAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The address of the second NTP server. + When setting this value, be sure that it + is of the type specified in secondNTPServerAddressType, + e.g. by setting both of them." + ::= { unitConfigurationEntry 64 } + +wireCount OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of wire objects in the PDU topology. This feature is no + longer used, the returned value is always 0." + ::= { unitConfigurationEntry 65 } + +transferSwitchCount OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of transfer switches." + ::= { unitConfigurationEntry 66 } + +productType OBJECT-TYPE + SYNTAX ProductTypeEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The product type (PDU, BCM, transfer switch or power meter)." + ::= { unitConfigurationEntry 67 } + +meteringControllerCount OBJECT-TYPE + SYNTAX Integer32(0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of metering controllers." + ::= { unitConfigurationEntry 68 } + +relayBehaviorOnPowerLoss OBJECT-TYPE + SYNTAX RelayPowerLossBehaviorEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The relay behavior on power loss (latching or non-latching)." + ::= { unitConfigurationEntry 69 } + +deviceCascadeType OBJECT-TYPE + SYNTAX DeviceCascadeTypeEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of network cascade this device is part of (none, bridging + or port forwarding)." + ::= { unitConfigurationEntry 70 } + +deviceCascadePosition OBJECT-TYPE + SYNTAX Integer32(0..99) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The position of the device in the cascade chain. Only supported in + port forwarding mode, 0 otherwise." + ::= { unitConfigurationEntry 71 } + +peripheralDevicesAutoManagement OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines whether newly-connected peripheral devices are automatically + assigned to an unused slot." + ::= { unitConfigurationEntry 72 } + +frontPanelOutletSwitching OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables/disables switching of outlets using the PDU front panel." + ::= { unitConfigurationEntry 73 } + +frontPanelRCMSelfTest OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables/disables front panel RCM self-test." + ::= { unitConfigurationEntry 74 } + +frontPanelActuatorControl OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables/disables front panel peripheral actuator control." + ::= { unitConfigurationEntry 75 } + +circuitCount OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of branch circuits in a panel." + ::= { unitConfigurationEntry 76 } + +activeDNSServerCount OBJECT-TYPE + SYNTAX Integer32(0..16) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of active DNS servers" + ::= { unitConfigurationEntry 77 } + +activeNTPServerCount OBJECT-TYPE + SYNTAX Integer32(0..16) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of active NTP servers" + ::= { unitConfigurationEntry 78 } + +-- activeDNSServerTable: information about active DNS servers + +activeDNSServerTable OBJECT-TYPE + SYNTAX SEQUENCE OF ActiveDNSServerEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of active DNS server entries. The number of rows in the table is + given by the value of activeDNSServerCount in unitConfigurationTable." + ::= { unit 6 } + +activeDNSServerEntry OBJECT-TYPE + SYNTAX ActiveDNSServerEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing an active DNS server for a particular PDU." + INDEX { pduId, activeDNSServerIndex } + ::= { activeDNSServerTable 1 } + +ActiveDNSServerEntryStruct ::= SEQUENCE { + activeDNSServerIndex Integer32, + activeDNSServerAddressType InetAddressType, + activeDNSServerAddress InetAddress, + activeDNSServerAddressSource AddressSourceEnumeration + } + +activeDNSServerIndex OBJECT-TYPE + SYNTAX Integer32(1..16) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for a DNS server. Its value ranges between 1 and activeDNSServerCount." + ::= { activeDNSServerEntry 2 } + +activeDNSServerAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the type of the corresponding instance + of activeDNSServerAddress object." + ::= { activeDNSServerEntry 3 } + +activeDNSServerAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address of the DNS server." + ::= { activeDNSServerEntry 4 } + +activeDNSServerAddressSource OBJECT-TYPE + SYNTAX AddressSourceEnumeration + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "How was the address obtained: static, DHCP, DHCPv6? + No longer used, always set to static." + ::= { activeDNSServerEntry 5 } + +-- activeNTPServerTable: information about active NTP servers + +activeNTPServerTable OBJECT-TYPE + SYNTAX SEQUENCE OF ActiveNTPServerEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of active NTP server entries. The number of rows in the table is + given by the value of activeNTPServerCount in unitConfigurationTable." + ::= { unit 7 } + +activeNTPServerEntry OBJECT-TYPE + SYNTAX ActiveNTPServerEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing an active NTP server for a particular PDU." + INDEX { pduId, activeNTPServerIndex } + ::= { activeNTPServerTable 1 } + +ActiveNTPServerEntryStruct ::= SEQUENCE { + activeNTPServerIndex Integer32, + activeNTPServerAddressType InetAddressType, + activeNTPServerAddress InetAddress, + activeNTPServerAddressSource AddressSourceEnumeration + } + +activeNTPServerIndex OBJECT-TYPE + SYNTAX Integer32(1..16) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for an NTP server. Its value ranges between 1 and activeNTPServerCount." + ::= { activeNTPServerEntry 2 } + +activeNTPServerAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the type of the corresponding instance + of activeNTPServerAddress object, e.g. IPv4, IPv6, DNS Name" + ::= { activeNTPServerEntry 3 } + +activeNTPServerAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address of the NTP server." + ::= { activeNTPServerEntry 4 } + +activeNTPServerAddressSource OBJECT-TYPE + SYNTAX AddressSourceEnumeration + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "How was the address obtained: static, DHCP, DHCPv6? + No longer used, always set to static." + ::= { activeNTPServerEntry 5 } + +-- controllerConfigurationTable: information about the controllers in a PDU + +controllerConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF ControllerConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of entries for the boards in a PDU. The number of entries is + one more than the sum of inletControllerCount, outletControllerCount + and meterControllerCount." + ::= { unit 3 } + +controllerConfigurationEntry OBJECT-TYPE + SYNTAX ControllerConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for a controller." + INDEX { pduId, boardType, boardIndex } + ::= { controllerConfigurationTable 1 } + +ControllerConfigurationEntryStruct ::= SEQUENCE { + boardType BoardTypeEnumeration, + boardIndex Integer32, + boardVersion DisplayString, + boardFirmwareVersion DisplayString, + boardFirmwareTimeStamp Unsigned32 + } + +boardType OBJECT-TYPE + SYNTAX BoardTypeEnumeration + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of board." + ::= { controllerConfigurationEntry 1 } + +boardIndex OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each controller." + ::= { controllerConfigurationEntry 2 } + +boardVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The board hardware version." + ::= { controllerConfigurationEntry 4 } + +boardFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The firmware version." + ::= { controllerConfigurationEntry 6 } + +boardFirmwareTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time when the board firmware was updated as UNIX timestamp. + It is measured in seconds since January 1, 1970 (midnight UTC/GMT)" + ::= { controllerConfigurationEntry 8 } + +-- logConfigurationTable: information and configuration for the sensor data log + +logConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF LogConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of parameters for the data logging feature. The number of + entries is given by the value of pduCount." + ::= { unit 4 } + +logConfigurationEntry OBJECT-TYPE + SYNTAX LogConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing data logging parameters for a particular PDU." + INDEX { pduId } + ::= { logConfigurationTable 1 } + +LogConfigurationEntryStruct ::= SEQUENCE { + dataLogging TruthValue, + measurementPeriod Integer32, + measurementsPerLogEntry Integer32, + logSize Integer32, + dataLoggingEnableForAllSensors TruthValue + } + +dataLogging OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines whether sensor data logging is enabled." + ::= { logConfigurationEntry 1 } + +measurementPeriod OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Data collection periodicity. This is the periodicity of the data + collected by the PDU. This value is fixed at 1 second." + ::= { logConfigurationEntry 2 } + +measurementsPerLogEntry OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of measurements aggregated into a data log entry." + ::= { logConfigurationEntry 3 } + +logSize OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The capacity (number of entries) of the data log." + ::= { logConfigurationEntry 4 } + +dataLoggingEnableForAllSensors OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Operation to control data logging for all sensors: + - when set to true, all *SensorLogAvailable OIDs are set to true + - when set to false, all *SensorLogAvailable OIDs are set to false" + ::= { logConfigurationEntry 5 } + +-- Information objects used exclusively in traps + +trapInformationTable OBJECT-TYPE + SYNTAX SEQUENCE OF TrapInformationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A group of objects used exclusively in traps. This is a table for + historic reasons; it can't be queried from the SNMP agent." + ::= { trapInformation 1 } + +trapInformationEntry OBJECT-TYPE + SYNTAX TrapInformationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects used in traps." + INDEX { pduId } + ::= { trapInformationTable 1 } + +TrapInformationEntryStruct ::= SEQUENCE { + userName DisplayString, + targetUser DisplayString, + imageVersion DisplayString, + roleName DisplayString, + smtpMessageRecipients DisplayString, + smtpServer DisplayString + } + +userName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The user currently logged in." + ::= { trapInformationEntry 2 } + +targetUser OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The user added, deleted, or modified." + ::= { trapInformationEntry 3 } + +imageVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of the upgrade image." + ::= { trapInformationEntry 5 } + +roleName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The role added, deleted, or modified." + ::= { trapInformationEntry 6 } + +smtpMessageRecipients OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Comma separated list of SMTP message recipients" + ::= { trapInformationEntry 7 } + +smtpServer OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address/host name of the SMTP server" + ::= { trapInformationEntry 8 } + +-- Additional Information needed for traps. + +oldSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The old sensor state used in sensor state transition traps." + ::= { trapInformation 2 } + +pduNumber OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "A unique value for each PDU. Its value ranges between 1 and the + value of pduCount." + ::= { trapInformation 3 } + +inletPoleNumber OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "A unique value for each inlet pole. Its value ranges between 1 + and the value of inletPoleCount." + ::= { trapInformation 5 } + +outletPoleNumber OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "A unique value for each outlet pole. Its value ranges between 1 + and the value of outletPoleCount." + ::= { trapInformation 7 } + +externalSensorNumber OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "A unique value for each external sensor. Its value ranges between 1 + and the value of externalSensorCount." + ::= { trapInformation 8 } + +typeOfSensor OBJECT-TYPE + SYNTAX SensorTypeEnumeration + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The type of sensor." + ::= { trapInformation 10 } + +errorDescription OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Description of the error" + ::= { trapInformation 11 } + +deviceChangedParameter OBJECT-TYPE + SYNTAX DeviceIdentificationParameterEnumeration + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Identifies the parameter that has changed." + ::= { trapInformation 12 } + +changedParameterNewValue OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The new value of the changed parameter" + ::= { trapInformation 13 } + +lhxSupportEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The new enabled state for Schroff LHX support." + ::= { trapInformation 14 } + +webcamModel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The model of the webcam" + ::= { trapInformation 15 } + +webcamConnectionPort OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The port to which the webcam is connected" + ::= { trapInformation 16 } + +agentInetPortNumber OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The UDP port number used for accessing the SNMP agent on the device. + This is necessary to identify the slave in a port forwarding cascade." + ::= { trapInformation 18 } + +peripheralDeviceRomcode OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The 1-wire romcode of a peripheral device" + ::= { trapInformation 19 } + +peripheralDeviceFirmwareUpdateState OBJECT-TYPE + SYNTAX PeripheralDeviceFirmwareUpdateStateEnumeration + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The firmware update state of a peripheral device" + ::= { trapInformation 20 } + +circuitNumber OBJECT-TYPE + SYNTAX Integer32(1..33000) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "A unique value for each circuit. Defined as follows: + circuitNumber = 1000 * panelId + circuitPosition + + Examples: + 1045 is the the circuit on panel 1 with lowest circuit position equal to 45 + 4067 is the the circuit on panel 4 with lowest circuit position equal to 67." + ::= { trapInformation 21 } + +circuitPoleNumber OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "A unique value for each circuit pole." + ::= { trapInformation 22 } + +phoneNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The phone number of e.g. an SMS receiver." + ::= { trapInformation 23 } + +smartCardReaderId OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The ID of a smartcard reader." + ::= { trapInformation 24 } + +smartCardTimestamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The timestamp indicating when the smartcard was inserted or removed. + It is measured in seconds since January 1, 1970 UTC" + ::= { trapInformation 25 } + +smartCardType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The type of a smartcard." + ::= { trapInformation 26 } + +smartCardId OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The ID/serial number of a smartcard." + ::= { trapInformation 27 } + +suspectedTripCauseLabel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The label of the outlet that likely caused the OCP trip, + if it can be determined." + ::= { trapInformation 28 } + +-- unitSensorConfigurationTable: information and settings for unit-level sensors + +unitSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF UnitSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of unit-level sensors for a PDU." + ::= { unit 5 } + +unitSensorConfigurationEntry OBJECT-TYPE + SYNTAX UnitSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing unit sensor parameters." + INDEX { pduId, sensorType } + ::= { unitSensorConfigurationTable 1 } + +UnitSensorConfigurationEntryStruct ::= SEQUENCE { + sensorType SensorTypeEnumeration, + unitSensorLogAvailable TruthValue, + unitSensorUnits SensorUnitsEnumeration, + unitSensorDecimalDigits Unsigned32, + unitSensorAccuracy HundredthsOfAPercentage, + unitSensorResolution Unsigned32, + unitSensorTolerance Unsigned32, + unitSensorMaximum Unsigned32, + unitSensorMinimum Unsigned32, + unitSensorHysteresis Unsigned32, + unitSensorStateChangeDelay Unsigned32, + unitSensorLowerCriticalThreshold Unsigned32, + unitSensorLowerWarningThreshold Unsigned32, + unitSensorUpperCriticalThreshold Unsigned32, + unitSensorUpperWarningThreshold Unsigned32, + unitSensorEnabledThresholds BITS, + unitSensorSignedMaximum Integer32, + unitSensorSignedMinimum Integer32, + unitSensorSignedLowerCriticalThreshold Integer32, + unitSensorSignedLowerWarningThreshold Integer32, + unitSensorSignedUpperCriticalThreshold Integer32, + unitSensorSignedUpperWarningThreshold Integer32 + } + +sensorType OBJECT-TYPE + SYNTAX SensorTypeEnumeration + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of sensor." + ::= { unitSensorConfigurationEntry 1 } + +unitSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for the sensor?" + ::= { unitSensorConfigurationEntry 4 } + +unitSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 6 } + +unitSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point." + ::= { unitSensorConfigurationEntry 7 } + +unitSensorAccuracy OBJECT-TYPE + SYNTAX HundredthsOfAPercentage + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The accuracy: the maximum relative difference (in percent) between + measurement and the actual value. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 8 } + +unitSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 9 } + +unitSensorTolerance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The tolerance: the maximum difference between measurement and the + actual value. The value of this OID variable should be scaled by + (unitSensorDecimalDigits + 1). For example, if the value is 50 and + unitSensorDecimalDigits is 2, then actual value is 0.05. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 10 } + +unitSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled maximum exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 11 } + +unitSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 12 } + +unitSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 13 } + +unitSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 14 } + +unitSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 21 } + +unitSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 22 } + +unitSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 23 } + +unitSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 24 } + +unitSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 25 } + +unitSensorSignedMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 26 } + +unitSensorSignedMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This value determines whether to use the signed or unsigned threshold + and value columns: If the minimum is below zero the sensor can have + negative readings and the signed columns should be used. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 27 } + +unitSensorSignedLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 28 } + +unitSensorSignedLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 29 } + +unitSensorSignedUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 30 } + +unitSensorSignedUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorConfigurationEntry 31 } + +-- inletConfigurationTable: inlet information and settings + +inletConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF InletConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of inlet configuration entries. The number of + entries is given by the value of inletCount for the PDU." + ::= { inlets 3 } + +inletConfigurationEntry OBJECT-TYPE + SYNTAX InletConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing parametersfor a particular inlet." + INDEX { pduId, inletId } + ::= { inletConfigurationTable 1 } + +InletConfigurationEntryStruct ::= SEQUENCE { + inletId Integer32, + inletLabel DisplayString, + inletName DisplayString, + inletPlug PlugTypeEnumeration, + inletPoleCount Integer32, + inletRatedVoltage DisplayString, + inletRatedCurrent DisplayString, + inletRatedFrequency DisplayString, + inletRatedVA DisplayString, + inletDeviceCapabilities BITS, + inletPoleCapabilities BITS, + inletPlugDescriptor DisplayString, + inletEnableState TruthValue, + inletRCMResidualOperatingCurrent Unsigned32 + } + +inletId OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each inlet. Its value ranges between 1 and the + value of inletCount." + ::= { inletConfigurationEntry 1 } + +inletLabel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The label on the PDU identifying the inlet." + ::= { inletConfigurationEntry 2 } + +inletName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user-defined name." + ::= { inletConfigurationEntry 3 } + +inletPlug OBJECT-TYPE + SYNTAX PlugTypeEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of plug/receptacle wired to the inlet. + Note: PlugTypeEnumeration is no longer updated, unlisted plugs will be + reported as plugOTHER. Use inletPlugDescriptor to reliably determine + the plug type." + ::= { inletConfigurationEntry 4 } + +inletPoleCount OBJECT-TYPE + SYNTAX Integer32(2..5) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of poles. + PDU: + 2 for 1-phase circuits + 3 for 3-phase delta-wired models + 4 for 3-phase wye-wired models, pole 4 is neutral + Power Meter: + 2 to 5 depending on the power meter type: + Pole 1 is Phase A + Pole 2 is Phase B + Pole 3 is Phase C + Pole 4 is Neutral + Pole 5 is Earth" + ::= { inletConfigurationEntry 5 } + +inletRatedVoltage OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The inlet voltage rating." + ::= { inletConfigurationEntry 6 } + +inletRatedCurrent OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The inlet current rating." + ::= { inletConfigurationEntry 7 } + +inletRatedFrequency OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The inlet frequency rating. + Deprecated: use pduRatedFrequency for unit nameplate information." + ::= { inletConfigurationEntry 8 } + +inletRatedVA OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The inlet VA (VoltAmps) rating. + Deprecated: use pduRatedVA for unit nameplate information." + ::= { inletConfigurationEntry 9 } + +inletDeviceCapabilities OBJECT-TYPE + SYNTAX BITS { rmsCurrent(0), + peakCurrent(1), + unbalancedCurrent(2), + rmsVoltage(3), + activePower(4), + apparentPower(5), + powerFactor(6), + activeEnergy(7), + apparentEnergy(8), + surgeProtectorStatus(21), + frequency(22), + phaseAngle(23), + residualCurrent(25), + rcmState(26), + reactivePower(28), + powerQuality(31) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit string indicating which inlet sensors are available." + ::= { inletConfigurationEntry 10 } + +inletPoleCapabilities OBJECT-TYPE + SYNTAX BITS { rmsCurrent(0), + peakCurrent(1), + rmsVoltage(3), + activePower(4), + apparentPower(5), + powerFactor(6), + activeEnergy(7), + apparentEnergy(8), + phaseAngle(23), + rmsVoltageLN(24), + reactivePower(28), + displacementPowerFactor(34) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit string indicating which inlet pole sensors are available." + ::= { inletConfigurationEntry 11 } + +inletPlugDescriptor OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The inlet plug type as a string." + ::= { inletConfigurationEntry 12 } + +inletEnableState OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/disable PDU operation for this inlet. + When PDU operation is disabled the sensors for this inlet and all + children will no longer be updated, and outlet switching is no longer + allowed. This is only meaningful for multi-inlet units if one inlet + is temporarily expected to be powered down. + Disabling the inlet of a single-inlet unit is forbidden and any + attempt to do so will result in an error." + ::= { inletConfigurationEntry 13 } + +inletRCMResidualOperatingCurrent OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "**NOTE:This object is obsolete. + Its functionality was implemented by existing RCM sensor thresholds. + The Residual Operating Current (Threshold) for the RCM State sensor. + For inlets without an RCM, any attempt to access this OID will return + NoSuchInstance error. The value of this OID is in milliamps." + ::= { inletConfigurationEntry 14 } + +-- inletPoleConfigurationTable: inlet pole information + +inletPoleConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF InletPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of inlet pole configuration entries. The number of + entries is given by the value of inletPoleCount for the inlet." + ::= { inlets 5 } + +inletPoleConfigurationEntry OBJECT-TYPE + SYNTAX InletPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing parameters for a particular inlet pole." + INDEX { pduId, inletId, inletPoleIndex } + ::= { inletPoleConfigurationTable 1 } + +InletPoleConfigurationEntryStruct ::= SEQUENCE { + inletPoleLine LineEnumeration, + inletPoleNode Integer32 + } + +inletPoleLine OBJECT-TYPE + SYNTAX LineEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The phase for this inlet pole." + ::= { inletPoleConfigurationEntry 1 } + +inletPoleNode OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The node to which this inlet pole is connected" + ::= { inletPoleConfigurationEntry 2 } + +-- inletSensorConfigurationTable: information and settings for inlet sensors + +inletSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF InletSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of configuration entries for an inlet sensor." + ::= { inlets 4 } + +inletSensorConfigurationEntry OBJECT-TYPE + SYNTAX InletSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for configuring an inlet sensor." + INDEX { pduId, inletId, sensorType } + ::= { inletSensorConfigurationTable 1 } + +InletSensorConfigurationEntryStruct ::= SEQUENCE { + inletSensorLogAvailable TruthValue, + inletSensorUnits SensorUnitsEnumeration, + inletSensorDecimalDigits Unsigned32, + inletSensorAccuracy HundredthsOfAPercentage, + inletSensorResolution Unsigned32, + inletSensorTolerance Unsigned32, + inletSensorMaximum Unsigned32, + inletSensorMinimum Unsigned32, + inletSensorHysteresis Unsigned32, + inletSensorStateChangeDelay Unsigned32, + inletSensorLowerCriticalThreshold Unsigned32, + inletSensorLowerWarningThreshold Unsigned32, + inletSensorUpperCriticalThreshold Unsigned32, + inletSensorUpperWarningThreshold Unsigned32, + inletSensorEnabledThresholds BITS, + inletSensorSignedMaximum Integer32, + inletSensorSignedMinimum Integer32, + inletSensorSignedLowerCriticalThreshold Integer32, + inletSensorSignedLowerWarningThreshold Integer32, + inletSensorSignedUpperCriticalThreshold Integer32, + inletSensorSignedUpperWarningThreshold Integer32 + } + +inletSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for the sensor?" + ::= { inletSensorConfigurationEntry 4 } + +inletSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 6 } + +inletSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 7 } + +inletSensorAccuracy OBJECT-TYPE + SYNTAX HundredthsOfAPercentage + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The accuracy: the maximum relative difference (in percent) between + measurement and the actual value. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 8 } + +inletSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 9 } + +inletSensorTolerance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The tolerance: the maximum difference between measurement and the + actual value. The value of this OID variable should be scaled by + (inletSensorDecimalDigits + 1). For example, if the value is 50 and + inletSensorDecimalDigits is 2, then actual value is 0.05. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 10 } + +inletSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled maximum exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 11 } + +inletSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 12 } + +inletSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 13 } + +inletSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 14 } + +inletSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 21 } + +inletSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 22 } + +inletSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 23 } + +inletSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 24 } + +inletSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 25 } + +inletSensorSignedMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 26 } + +inletSensorSignedMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value determines whether to use the signed or unsigned threshold + and value columns: If the minimum is below zero the sensor can have + negative readings and the signed columns should be used. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 27 } + +inletSensorSignedLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 28 } + +inletSensorSignedLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 29 } + +inletSensorSignedUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 30 } + +inletSensorSignedUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorConfigurationEntry 31 } + +-- inletPoleSensorConfigurationTable: information and settings for inlet pole sensors + +inletPoleSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF InletPoleSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of configuration entries for an inlet pole sensor." + ::= { inlets 6 } + +inletPoleSensorConfigurationEntry OBJECT-TYPE + SYNTAX InletPoleSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for configuring an inlet pole sensor." + INDEX { pduId, inletId, inletPoleIndex, sensorType } + ::= { inletPoleSensorConfigurationTable 1 } + +InletPoleSensorConfigurationEntryStruct ::= SEQUENCE { + inletPoleIndex Integer32, + inletPoleSensorLogAvailable TruthValue, + inletPoleSensorUnits SensorUnitsEnumeration, + inletPoleSensorDecimalDigits Unsigned32, + inletPoleSensorAccuracy HundredthsOfAPercentage, + inletPoleSensorResolution Unsigned32, + inletPoleSensorTolerance Unsigned32, + inletPoleSensorMaximum Unsigned32, + inletPoleSensorMinimum Unsigned32, + inletPoleSensorHysteresis Unsigned32, + inletPoleSensorStateChangeDelay Unsigned32, + inletPoleSensorLowerCriticalThreshold Unsigned32, + inletPoleSensorLowerWarningThreshold Unsigned32, + inletPoleSensorUpperCriticalThreshold Unsigned32, + inletPoleSensorUpperWarningThreshold Unsigned32, + inletPoleSensorEnabledThresholds BITS, + inletPoleSensorSignedMaximum Integer32, + inletPoleSensorSignedMinimum Integer32, + inletPoleSensorSignedLowerCriticalThreshold Integer32, + inletPoleSensorSignedLowerWarningThreshold Integer32, + inletPoleSensorSignedUpperCriticalThreshold Integer32, + inletPoleSensorSignedUpperWarningThreshold Integer32 + } + +inletPoleIndex OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each inlet pole. Its value + ranges between 1 and the value of inletPoleCount." + ::= { inletPoleSensorConfigurationEntry 1 } + +inletPoleSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for the sensor?" + ::= { inletPoleSensorConfigurationEntry 4 } + +inletPoleSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 6 } + +inletPoleSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 7 } + +inletPoleSensorAccuracy OBJECT-TYPE + SYNTAX HundredthsOfAPercentage + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The accuracy: the maximum relative difference (in percent) between + measurement and the actual value. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 8 } + +inletPoleSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 9 } + +inletPoleSensorTolerance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The tolerance: the maximum difference between measurement and the + actual value. The value of this OID variable should be scaled by + (inletPoleSensorDecimalDigits + 1). For example, if the value is 50 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.05. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 10 } + +inletPoleSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled maximum exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 11 } + +inletPoleSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 12 } + +inletPoleSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 13 } + +inletPoleSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 14 } + +inletPoleSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 21 } + +inletPoleSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 22 } + +inletPoleSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 23 } + +inletPoleSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 24 } + +inletPoleSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 25 } + +inletPoleSensorSignedMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 26 } + +inletPoleSensorSignedMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value determines whether to use the signed or unsigned threshold + and value columns: If the minimum is below zero the sensor can have + negative readings and the signed columns should be used. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 27 } + +inletPoleSensorSignedLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 28 } + +inletPoleSensorSignedLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 29 } + +inletPoleSensorSignedUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 30 } + +inletPoleSensorSignedUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorConfigurationEntry 31 } + +-- overCurrentProtectorConfigurationTable: information and settings for overcurrent protectors + +overCurrentProtectorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF OverCurrentProtectorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of overcurrent protector configuration entries. The number of + entries is given by the value of overCurrentProtectorCount for the PDU." + ::= { overCurrentProtector 3 } + +overCurrentProtectorConfigurationEntry OBJECT-TYPE + SYNTAX OverCurrentProtectorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for a particular overcurrent protector." + INDEX { pduId, overCurrentProtectorIndex } + ::= { overCurrentProtectorConfigurationTable 1 } + +OverCurrentProtectorConfigurationEntryStruct ::= SEQUENCE { + overCurrentProtectorIndex Integer32, + overCurrentProtectorLabel DisplayString, + overCurrentProtectorName DisplayString, + overCurrentProtectorType OverCurrentProtectorTypeEnumeration, + overCurrentProtectorRatedCurrent DisplayString, + overCurrentProtectorPoleCount Integer32, + overCurrentProtectorCapabilities BITS, + overCurrentProtectorPowerSource RowPointer + } + +overCurrentProtectorIndex OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each overcurrent protector. Its value + ranges between 1 and the value of overCurrentProtectorCount." + ::= { overCurrentProtectorConfigurationEntry 1 } + +overCurrentProtectorLabel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The label on the PDU identifying the overcurrent protector." + ::= { overCurrentProtectorConfigurationEntry 2 } + +overCurrentProtectorName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user-defined name." + ::= { overCurrentProtectorConfigurationEntry 3 } + +overCurrentProtectorType OBJECT-TYPE + SYNTAX OverCurrentProtectorTypeEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of overcurrent protector." + ::= { overCurrentProtectorConfigurationEntry 4 } + +overCurrentProtectorRatedCurrent OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current rating." + ::= { overCurrentProtectorConfigurationEntry 5 } + +overCurrentProtectorPoleCount OBJECT-TYPE + SYNTAX Integer32(1..3) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of overcurrent protector poles." + ::= { overCurrentProtectorConfigurationEntry 6 } + +overCurrentProtectorCapabilities OBJECT-TYPE + SYNTAX BITS { rmsCurrent(0), + peakCurrent(1), + trip(14) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit string indicating which overcurrent protector sensors are available." + ::= { overCurrentProtectorConfigurationEntry 9 } + +overCurrentProtectorPowerSource OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object allows discovery of how the PDU is wired. It indicates the + overcurrent protector's power source which can be one of the following: + - an inlet + - another overcurrent protector + - a transfer switch + + If the power source is an inlet, it contains the OID of + an inletLabel in the inletConfigurationTable. The indices of the OID can + then be used to reference other objects in the inlet tables. + + If the power source is an overcurrent protector, it + contains the OID of an overCurrentProtectorLabel in the + overCurrentProtectorConfigurationTable. The indices of the OID can then be + used to reference other objects in the overcurrent protector tables. + + If the power source is a transfer switch, it + contains the OID of a transferSwitchLabel in the + transferSwitchConfigurationTable. The indices of the OID can then be + used to reference other objects in the transfer switch tables." + ::= { overCurrentProtectorConfigurationEntry 10 } + +-- overCurrentProtectorPoleConfigurationTable: overcurrent protector pole information + +overCurrentProtectorPoleConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF OverCurrentProtectorPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of overcurrent protector pole configuration entries. The number of + entries is given by the value of overCurrentProtectorPoleCount." + ::= { overCurrentProtector 5 } + +overCurrentProtectorPoleConfigurationEntry OBJECT-TYPE + SYNTAX OverCurrentProtectorPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing parameters for a particular overcurrent protector pole." + INDEX { pduId, overCurrentProtectorIndex, overCurrentProtectorPoleIndex } + ::= { overCurrentProtectorPoleConfigurationTable 1 } + +OverCurrentProtectorPoleConfigurationEntryStruct ::= SEQUENCE { + overCurrentProtectorPoleIndex Integer32, + overCurrentProtectorPoleLine LineEnumeration, + overCurrentProtectorPoleInNode Integer32, + overCurrentProtectorPoleOutNode Integer32 + } + +overCurrentProtectorPoleIndex OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each overcurrent protector pole. Its value + ranges between 1 and the value of overCurrentProtectorPoleCount." + ::= { overCurrentProtectorPoleConfigurationEntry 1 } + +overCurrentProtectorPoleLine OBJECT-TYPE + SYNTAX LineEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The phase for this overcurrent protector pole." + ::= { overCurrentProtectorPoleConfigurationEntry 2 } + +overCurrentProtectorPoleInNode OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The node to which this overcurrent protector pole input is connected" + ::= { overCurrentProtectorPoleConfigurationEntry 3 } + +overCurrentProtectorPoleOutNode OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The node to which this overcurrent protector pole output is connected" + ::= { overCurrentProtectorPoleConfigurationEntry 4 } + +-- overCurrentProtectorSensorConfigurationTable: information and settings for OCP sensors + +overCurrentProtectorSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF OverCurrentProtectorSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of overcurrent protector sensor configuration entries." + ::= { overCurrentProtector 4 } + +overCurrentProtectorSensorConfigurationEntry OBJECT-TYPE + SYNTAX OverCurrentProtectorSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An overcurrent protector sensor entry containing objects for a + particular overcurrent protector sensor." + INDEX { pduId, overCurrentProtectorIndex, sensorType } + ::= { overCurrentProtectorSensorConfigurationTable 1 } + +OverCurrentProtectorSensorConfigurationEntryStruct ::= SEQUENCE { + overCurrentProtectorSensorLogAvailable TruthValue, + overCurrentProtectorSensorUnits SensorUnitsEnumeration, + overCurrentProtectorSensorDecimalDigits Unsigned32, + overCurrentProtectorSensorAccuracy HundredthsOfAPercentage, + overCurrentProtectorSensorResolution Unsigned32, + overCurrentProtectorSensorTolerance Unsigned32, + overCurrentProtectorSensorMaximum Unsigned32, + overCurrentProtectorSensorMinimum Unsigned32, + overCurrentProtectorSensorHysteresis Unsigned32, + overCurrentProtectorSensorStateChangeDelay Unsigned32, + overCurrentProtectorSensorLowerCriticalThreshold Unsigned32, + overCurrentProtectorSensorLowerWarningThreshold Unsigned32, + overCurrentProtectorSensorUpperCriticalThreshold Unsigned32, + overCurrentProtectorSensorUpperWarningThreshold Unsigned32, + overCurrentProtectorSensorEnabledThresholds BITS, + overCurrentProtectorSensorSignedMaximum Integer32, + overCurrentProtectorSensorSignedMinimum Integer32, + overCurrentProtectorSensorSignedLowerCriticalThreshold Integer32, + overCurrentProtectorSensorSignedLowerWarningThreshold Integer32, + overCurrentProtectorSensorSignedUpperCriticalThreshold Integer32, + overCurrentProtectorSensorSignedUpperWarningThreshold Integer32 + } + +overCurrentProtectorSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for this sensor?" + ::= { overCurrentProtectorSensorConfigurationEntry 4 } + +overCurrentProtectorSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 6 } + +overCurrentProtectorSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 7 } + +overCurrentProtectorSensorAccuracy OBJECT-TYPE + SYNTAX HundredthsOfAPercentage + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The accuracy: the maximum relative difference (in percent) between + measurement and the actual value. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 8 } + +overCurrentProtectorSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 9 } + +overCurrentProtectorSensorTolerance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The tolerance: the maximum difference between measurement and the + actual value. The value of this OID variable should be scaled by + (overCurrentProtectorSensorDecimalDigits + 1). For example, if the value is 50 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.05. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 10 } + +overCurrentProtectorSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled maximum exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 11 } + +overCurrentProtectorSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 12 } + +overCurrentProtectorSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 13 } + +overCurrentProtectorSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 14 } + +overCurrentProtectorSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 21 } + +overCurrentProtectorSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 22 } + +overCurrentProtectorSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 23 } + +overCurrentProtectorSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 24 } + +overCurrentProtectorSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 25} + +overCurrentProtectorSensorSignedMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 26 } + +overCurrentProtectorSensorSignedMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This value determines whether to use the signed or unsigned threshold + and value columns: If the minimum is below zero the sensor can have + negative readings and the signed columns should be used. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 27 } + +overCurrentProtectorSensorSignedLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 28 } + +overCurrentProtectorSensorSignedLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 29 } + +overCurrentProtectorSensorSignedUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 30 } + +overCurrentProtectorSensorSignedUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorConfigurationEntry 31 } + +-- outletConfigurationTable: outlet information and settings + +outletConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of outlet configuration entries. The number of + entries is given by the value of outletCount for the PDU." + ::= { outlets 3 } + +outletConfigurationEntry OBJECT-TYPE + SYNTAX OutletConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An outlet entry containing parameters for a particular outlet." + INDEX { pduId, outletId } + ::= { outletConfigurationTable 1 } + +OutletConfigurationEntryStruct ::= SEQUENCE { + outletId Integer32, + outletLabel DisplayString, + outletName DisplayString, + outletReceptacle ReceptacleTypeEnumeration, + outletPoleCount Integer32, + outletRatedVoltage DisplayString, + outletRatedCurrent DisplayString, + outletRatedVA DisplayString, + outletDeviceCapabilities BITS, + outletPoleCapabilities BITS, + outletPowerCyclingPowerOffPeriod Unsigned32, + outletStateOnStartup OutletStateOnStartupEnumeration, + outletUseGlobalPowerCyclingPowerOffPeriod TruthValue, + outletSwitchable TruthValue, + outletReceptacleDescriptor DisplayString, + outletNonCritical TruthValue, + outletSequenceDelay Unsigned32, + outletPowerSource RowPointer + } + +outletId OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each outlet. Its value + ranges between 1 and the value of outletCount." + ::= { outletConfigurationEntry 1 } + +outletLabel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The label on the PDU identifying the outlet." + ::= { outletConfigurationEntry 2 } + +outletName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user-defined name." + ::= { outletConfigurationEntry 3 } + +outletReceptacle OBJECT-TYPE + SYNTAX ReceptacleTypeEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The receptacle type. + Note: ReceptacleTypeEnumeration is no longer updated, unlisted receptacles + will be listed as receptacleOTHER. Use outletReceptacleDescriptor to + reliably determine the receptacle type." + ::= { outletConfigurationEntry 4 } + +outletPoleCount OBJECT-TYPE + SYNTAX Integer32(2..4) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of poles." + ::= { outletConfigurationEntry 5 } + +outletRatedVoltage OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The outlet voltage rating." + ::= { outletConfigurationEntry 6 } + +outletRatedCurrent OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The outlet current rating." + ::= { outletConfigurationEntry 7 } + +outletRatedVA OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The outlet VA (VoltAmps) rating." + ::= { outletConfigurationEntry 8 } + +outletDeviceCapabilities OBJECT-TYPE + SYNTAX BITS { rmsCurrent(0), + peakCurrent(1), + unbalancedCurrent(2), + rmsVoltage(3), + activePower(4), + apparentPower(5), + powerFactor(6), + activeEnergy(7), + apparentEnergy(8), + onOff(13), + frequency(22), + phaseAngle(23) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit string indicating which outlet sensors are available." + ::= { outletConfigurationEntry 10 } + +outletPoleCapabilities OBJECT-TYPE + SYNTAX BITS { rmsCurrent(0), + peakCurrent(1), + rmsVoltage(3), + activePower(4), + apparentPower(5), + powerFactor(6), + activeEnergy(7), + apparentEnergy(8), + rmsVoltageLN(24) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit string indicating which outlet pole sensors are available." + ::= { outletConfigurationEntry 11 } + +outletPowerCyclingPowerOffPeriod OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The power-off period when an outlet is cycled. + Overrides the global value if outletUseGlobalPowerCyclingPowerOffPeriod + is false. + Specified in seconds, 1 <= value <= 3600." + ::= { outletConfigurationEntry 12 } + +outletStateOnStartup OBJECT-TYPE + SYNTAX OutletStateOnStartupEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The outlet state on device startup. + This value is ignored if relayBehaviorOnPowerLoss is set to latching." + ::= { outletConfigurationEntry 13 } + +outletUseGlobalPowerCyclingPowerOffPeriod OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates which power-off period to use when the outlet is cycled: + - true: use globalOutletPowerCyclingPowerOffPeriod + - false: use outletPowerCyclingPowerOffPeriod" + ::= { outletConfigurationEntry 14 } + +outletSwitchable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is this outlet switchable?" + ::= { outletConfigurationEntry 28 } + +outletReceptacleDescriptor OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The outlet receptacle type as a string." + ::= { outletConfigurationEntry 29 } + +outletNonCritical OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is this outlet non-critical? Non-critical outlets will be switched + off when load shedding is enabled." + ::= { outletConfigurationEntry 30 } + +outletSequenceDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The time interval between switching on this outlet and the next outlet in the + outlet sequence. + This applies to the following operations. + 1) Switch all outlets on operation is executed + 2) Power to the PDU is cycled + It is specified in seconds, 0 <= value <= 3600 seconds. + The effective time interval used can never be less than the inrushGuardDelay + defined in the unitConfigurationTable." + ::= { outletConfigurationEntry 32 } + +outletPowerSource OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object allows discovery of how the PDU is wired. It indicates the + outlet's power source which can one of the following: + - an inlet + - an overcurrent protector + - a transfer switch + + If the power source is an inlet, it contains the OID of + an inletLabel in the inletConfigurationTable. The indices of the OID can + then be used to reference other objects in the inlet tables. + + If the power source is an overcurrent protector, it + contains the OID of an overCurrentProtectorLabel in the + overCurrentProtectorConfigurationTable. The indices of the OID can then be + used to reference other objects in the overcurrent protector tables. + + If the power source is a transfer switch, it + contains the OID of a transferSwitchLabel in the + transferSwitchConfigurationTable. The indices of the OID can then be + used to reference other objects in the transfer switch tables." + ::= { outletConfigurationEntry 33} + +-- outetPoleConfigurationTable: outlet pole information + +outletPoleConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of outlet pole configuration entries. The number of + entries is given by the value of outletPoleCount for the PDU." + ::= { outlets 5 } + +outletPoleConfigurationEntry OBJECT-TYPE + SYNTAX OutletPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing parameters for a particular outlet pole." + INDEX { pduId, outletId, outletPoleIndex } + ::= { outletPoleConfigurationTable 1 } + +OutletPoleConfigurationEntryStruct ::= SEQUENCE { + outletPoleLine LineEnumeration, + outletPoleNode Integer32 + } + +outletPoleLine OBJECT-TYPE + SYNTAX LineEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The phase for this outlet pole." + ::= { outletPoleConfigurationEntry 1 } + +outletPoleNode OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The node to which this outlet pole is connected" + ::= { outletPoleConfigurationEntry 2 } + +-- outletSensorConfigurationTable: information and settings for outlet sensors + +outletSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of outlet sensor configuration entries." + ::= { outlets 4 } + +outletSensorConfigurationEntry OBJECT-TYPE + SYNTAX OutletSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing parameters for an outlet sensor." + INDEX { pduId, outletId, sensorType } + ::= { outletSensorConfigurationTable 1 } + +OutletSensorConfigurationEntryStruct ::= SEQUENCE { + outletSensorLogAvailable TruthValue, + outletSensorUnits SensorUnitsEnumeration, + outletSensorDecimalDigits Unsigned32, + outletSensorAccuracy HundredthsOfAPercentage, + outletSensorResolution Unsigned32, + outletSensorTolerance Unsigned32, + outletSensorMaximum Unsigned32, + outletSensorMinimum Unsigned32, + outletSensorHysteresis Unsigned32, + outletSensorStateChangeDelay Unsigned32, + outletSensorLowerCriticalThreshold Unsigned32, + outletSensorLowerWarningThreshold Unsigned32, + outletSensorUpperCriticalThreshold Unsigned32, + outletSensorUpperWarningThreshold Unsigned32, + outletSensorEnabledThresholds BITS, + outletSensorSignedMaximum Integer32, + outletSensorSignedMinimum Integer32, + outletSensorSignedLowerCriticalThreshold Integer32, + outletSensorSignedLowerWarningThreshold Integer32, + outletSensorSignedUpperCriticalThreshold Integer32, + outletSensorSignedUpperWarningThreshold Integer32 + } + +outletSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for this sensor?" + ::= { outletSensorConfigurationEntry 4 } + +outletSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 6 } + +outletSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 7 } + +outletSensorAccuracy OBJECT-TYPE + SYNTAX HundredthsOfAPercentage + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The accuracy: the maximum relative difference (in percent) between + measurement and the actual value. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 8 } + +outletSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 9 } + +outletSensorTolerance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The tolerance: the maximum difference between measurement and the + actual value. The value of this OID variable should be scaled by + (outletSensorDecimalDigits + 1). For example, if the value is 50 and + outletSensorDecimalDigits is 2, then actual value is 0.05. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 10 } + +outletSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled maximum exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 11 } + +outletSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 12 } + +outletSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 13 } + +outletSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 14 } + +outletSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 21 } + +outletSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 22 } + +outletSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 23 } + +outletSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 24 } + +outletSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 25 } + +outletSensorSignedMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 26 } + +outletSensorSignedMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This value determines whether to use the signed or unsigned threshold + and value columns: If the minimum is below zero the sensor can have + negative readings and the signed columns should be used. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 27 } + +outletSensorSignedLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 28 } + +outletSensorSignedLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 29 } + +outletSensorSignedUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 30 } + +outletSensorSignedUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorConfigurationEntry 31 } + +-- outletPoleSensorConfigurationTable: information and settings for outlet pole sensors + +outletPoleSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletPoleSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of outlet pole sensor configuration entries." + ::= { outlets 6 } + +outletPoleSensorConfigurationEntry OBJECT-TYPE + SYNTAX OutletPoleSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for configuring an outlet pole sensor." + INDEX { pduId, outletId, outletPoleIndex, sensorType } + ::= { outletPoleSensorConfigurationTable 1 } + +OutletPoleSensorConfigurationEntryStruct ::= SEQUENCE { + outletPoleIndex Integer32, + outletPoleSensorLogAvailable TruthValue, + outletPoleSensorUnits SensorUnitsEnumeration, + outletPoleSensorDecimalDigits Unsigned32, + outletPoleSensorAccuracy HundredthsOfAPercentage, + outletPoleSensorResolution Unsigned32, + outletPoleSensorTolerance Unsigned32, + outletPoleSensorMaximum Unsigned32, + outletPoleSensorMinimum Unsigned32, + outletPoleSensorHysteresis Unsigned32, + outletPoleSensorStateChangeDelay Unsigned32, + outletPoleSensorLowerCriticalThreshold Unsigned32, + outletPoleSensorLowerWarningThreshold Unsigned32, + outletPoleSensorUpperCriticalThreshold Unsigned32, + outletPoleSensorUpperWarningThreshold Unsigned32, + outletPoleSensorEnabledThresholds BITS, + outletPoleSensorSignedMaximum Integer32, + outletPoleSensorSignedMinimum Integer32, + outletPoleSensorSignedLowerCriticalThreshold Integer32, + outletPoleSensorSignedLowerWarningThreshold Integer32, + outletPoleSensorSignedUpperCriticalThreshold Integer32, + outletPoleSensorSignedUpperWarningThreshold Integer32 + } + +outletPoleIndex OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each outlet pole. Its value + ranges between 1 and the value of outletPoleCount." + ::= { outletPoleSensorConfigurationEntry 1 } + +outletPoleSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for the sensor?" + ::= { outletPoleSensorConfigurationEntry 4 } + +outletPoleSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 6 } + +outletPoleSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 7 } + +outletPoleSensorAccuracy OBJECT-TYPE + SYNTAX HundredthsOfAPercentage + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The accuracy: the maximum relative difference (in percent) between + measurement and the actual value. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 8 } + +outletPoleSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 9 } + +outletPoleSensorTolerance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The tolerance: the maximum difference between measurement and the + actual value. The value of this OID variable should be scaled by + (outletPoleSensorDecimalDigits + 1). For example, if the value is 50 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.05. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 10 } + +outletPoleSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled maximum exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 11 } + +outletPoleSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 12 } + +outletPoleSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 13 } + +outletPoleSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 14 } + +outletPoleSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 21 } + +outletPoleSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 22 } + +outletPoleSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 23 } + +outletPoleSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 24 } + +outletPoleSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 25 } + +outletPoleSensorSignedMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 26 } + +outletPoleSensorSignedMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value determines whether to use the signed or unsigned threshold + and value columns: If the minimum is below zero the sensor can have + negative readings and the signed columns should be used. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 27 } + +outletPoleSensorSignedLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 28 } + +outletPoleSensorSignedLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 29 } + +outletPoleSensorSignedUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 30 } + +outletPoleSensorSignedUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorConfigurationEntry 31 } + +-- externalSensorConfigurationTable: external sensor information and settings + +externalSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExternalSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of external sensor configuration entries. The number of + entries is given by the value of externalSensorCount for the PDU." + ::= { externalSensors 3 } + +externalSensorConfigurationEntry OBJECT-TYPE + SYNTAX ExternalSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing parameters for an external sensor." + INDEX { pduId, sensorID } + ::= { externalSensorConfigurationTable 1 } + +ExternalSensorConfigurationEntryStruct ::= SEQUENCE { + sensorID Integer32, + externalSensorType SensorTypeEnumeration, + externalSensorSerialNumber DisplayString, + externalSensorName DisplayString, + externalSensorDescription DisplayString, + externalSensorXCoordinate DisplayString, + externalSensorYCoordinate DisplayString, + externalSensorZCoordinate DisplayString, + externalSensorChannelNumber Integer32, + externalOnOffSensorSubtype SensorTypeEnumeration, + externalSensorLogAvailable TruthValue, + externalSensorUnits SensorUnitsEnumeration, + externalSensorDecimalDigits Unsigned32, + externalSensorAccuracy HundredthsOfAPercentage, + externalSensorResolution Unsigned32, + externalSensorTolerance Unsigned32, + externalSensorMaximum Integer32, + externalSensorMinimum Integer32, + externalSensorHysteresis Unsigned32, + externalSensorStateChangeDelay Unsigned32, + externalSensorLowerCriticalThreshold Integer32, + externalSensorLowerWarningThreshold Integer32, + externalSensorUpperCriticalThreshold Integer32, + externalSensorUpperWarningThreshold Integer32, + externalSensorEnabledThresholds BITS, + externalSensorIsActuator TruthValue, + externalSensorPosition DisplayString, + externalSensorUseDefaultThresholds TruthValue, + externalSensorAlarmedToNormalDelay Integer32 + } + +sensorID OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each sensor. Its value + ranges between 1 and the value of externalSensorCount." + ::= { externalSensorConfigurationEntry 1 } + +externalSensorType OBJECT-TYPE + SYNTAX SensorTypeEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of sensor." + ::= { externalSensorConfigurationEntry 2 } + +externalSensorSerialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor serial number." + ::= { externalSensorConfigurationEntry 3 } + +externalSensorName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user-defined name." + ::= { externalSensorConfigurationEntry 4 } + +externalSensorDescription OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user-defined description." + ::= { externalSensorConfigurationEntry 5 } + +externalSensorXCoordinate OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The X coordinate." + ::= { externalSensorConfigurationEntry 6 } + +externalSensorYCoordinate OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Y coordinate." + ::= { externalSensorConfigurationEntry 7 } + +externalSensorZCoordinate OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Z coordinate. The value must be a number if + externalSensorsZCoordinateUnits is rackUnits." + ::= { externalSensorConfigurationEntry 8 } + +externalSensorChannelNumber OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The channel number. + This applies only to contact sensors, -1 for other sensors." + ::= { externalSensorConfigurationEntry 9 } + +externalOnOffSensorSubtype OBJECT-TYPE + SYNTAX SensorTypeEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The subtype of the binary sensor." + ::= { externalSensorConfigurationEntry 10 } + +externalSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for this sensor?" + ::= { externalSensorConfigurationEntry 14 } + +externalSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 16 } + +externalSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 17 } + +externalSensorAccuracy OBJECT-TYPE + SYNTAX HundredthsOfAPercentage + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The accuracy: the maximum relative difference (in percent) between + measurement and the actual value. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 18 } + +externalSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 19 } + +externalSensorTolerance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The tolerance: the maximum difference between measurement and the + actual value. The value of this OID variable should be scaled by + (externalSensorDecimalDigits + 1). For example, if the value is 50 and + externalSensorDecimalDigits is 2, then actual value is 0.05. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 20 } + +externalSensorMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible value + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 21 } + +externalSensorMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible value + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 22 } + +externalSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 23 } + +externalSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 24 } + +externalSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 31 } + +externalSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 32 } + +externalSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 33 } + +externalSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 34 } + +externalSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorConfigurationEntry 35} + +externalSensorIsActuator OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether the sensor is an actuator." + ::= { externalSensorConfigurationEntry 36 } + +externalSensorPosition OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The position of the sensor in the bus topology. + The format is a semicolon separated list of Keyword:value pairs. + Keyword can be one of the following: + ONBOARD, DEVICE-1WIREPORT, HUBPORT, CHAIN-POSITION + + Examples: + 1) Onboard sensor + ONBOARD:CC1 + 2) Old sensor connected to device 1-wire port + DEVICE-1WIREPORT:2 + 3) New-style sensor connected to device 1-wire port + DEVICE-1WIREPORT:2;CHAIN-POSITION:3 + 4) New-style sensor connected to hub port 3 + DEVICE-1WIREPORT:2;CHAIN-POSITION:1;HUBPORT:3;CHAIN-POSITION:1 + 5) Old-style sensor connected to end of new-style sensor chain + DEVICE-1WIREPORT:2;" + ::= { externalSensorConfigurationEntry 37 } + +externalSensorUseDefaultThresholds OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Use default thresholds for this sensor? + True: Use default thresholds from externalSensorTypeDefaultThresholdsTable + False: Use sensor-specific thresholds from this table" + ::= { externalSensorConfigurationEntry 38 } + +externalSensorAlarmedToNormalDelay OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay (in seconds) before the sensor returns from alarmed to normal. + This is supported for motion detectors only. For all other sensors the + value is 0 and cannot be set to any other value." + ::= { externalSensorConfigurationEntry 39 } + +-- externalSensorTypeDefaultThresholdsTable: Default thresholds for each external sensor type + +externalSensorTypeDefaultThresholdsTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExternalSensorTypeDefaultThresholdsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table listing the default thresholds for each sensor type. + The table contains a row for each supported type of external sensor + with a numeric reading." + ::= { externalSensors 4 } + +externalSensorTypeDefaultThresholdsEntry OBJECT-TYPE + SYNTAX ExternalSensorTypeDefaultThresholdsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing default thresholds for a sensor type." + INDEX { pduId, sensorType } + ::= { externalSensorTypeDefaultThresholdsTable 1 } + +ExternalSensorTypeDefaultThresholdsEntryStruct ::= SEQUENCE { + externalSensorTypeDefaultHysteresis Unsigned32, + externalSensorTypeDefaultStateChangeDelay Unsigned32, + externalSensorTypeDefaultLowerCriticalThreshold Integer32, + externalSensorTypeDefaultLowerWarningThreshold Integer32, + externalSensorTypeDefaultUpperCriticalThreshold Integer32, + externalSensorTypeDefaultUpperWarningThreshold Integer32, + externalSensorTypeDefaultEnabledThresholds BITS + } + +externalSensorTypeDefaultHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01." + ::= { externalSensorTypeDefaultThresholdsEntry 3 } + +externalSensorTypeDefaultStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported." + ::= { externalSensorTypeDefaultThresholdsEntry 4 } + +externalSensorTypeDefaultLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01." + ::= { externalSensorTypeDefaultThresholdsEntry 5 } + +externalSensorTypeDefaultLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01." + ::= { externalSensorTypeDefaultThresholdsEntry 6 } + +externalSensorTypeDefaultUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01." + ::= { externalSensorTypeDefaultThresholdsEntry 7 } + +externalSensorTypeDefaultUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01." + ::= { externalSensorTypeDefaultThresholdsEntry 8 } + +externalSensorTypeDefaultEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled." + ::= { externalSensorTypeDefaultThresholdsEntry 9} + +-- serverReachabilityTable: Settings for the server reachability feature + +serverReachabilityTable OBJECT-TYPE + SYNTAX SEQUENCE OF ServerReachabilityEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of server entries. The number of + entries is given by the value of serverCount for the PDU." + ::= { serverReachability 3 } + +serverReachabilityEntry OBJECT-TYPE + SYNTAX ServerReachabilityEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing parameters for a server." + INDEX { pduId, serverID } + ::= { serverReachabilityTable 1 } + +ServerReachabilityEntryStruct ::= SEQUENCE { + serverID Integer32, + serverIPAddress DisplayString, + serverPingEnabled TruthValue + } + +serverID OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each server. Its value + ranges between 1 and the value of serverCount for that PDU" + ::= { serverReachabilityEntry 1 } + +serverIPAddress OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Address/host name of the server" + ::= { serverReachabilityEntry 3 } + +serverPingEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is ping enabled for this server?" + ::= { serverReachabilityEntry 4 } + +-- wireConfigurationTable: Information about wire objects in the PDU + +wireConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF WireConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "A list of wire configuration entries. The number of + entries is given by the value of wireCount for the PDU. + Note: This feature is no longer used, the table is always empty." + ::= { wires 3 } + +wireConfigurationEntry OBJECT-TYPE + SYNTAX WireConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "An entry containing objects for a particular wire." + INDEX { pduId, wireId } + ::= { wireConfigurationTable 1 } + +WireConfigurationEntryStruct ::= SEQUENCE { + wireId Integer32, + wireLabel DisplayString, + wireCapabilities BITS, + wirePowerSource RowPointer + } + +wireId OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "A unique value for each wire. Its value + ranges between 1 and the value of wireCount." + ::= { wireConfigurationEntry 1 } + +wireLabel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The label on the PDU identifying the wire." + ::= { wireConfigurationEntry 2 } + +wireCapabilities OBJECT-TYPE + SYNTAX BITS { rmsCurrent(0), + peakCurrent(1), + unbalancedCurrent(2), + rmsVoltage(3), + activePower(4), + apparentPower(5), + powerFactor(6), + activeEnergy(7), + apparentEnergy(8) } + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "A bit string indicating which wire sensors are available." + ::= { wireConfigurationEntry 3 } + +wirePowerSource OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "This object allows discovery of how the PDU is wired. It indicates the + wire's power source which can one of the following: + - an inlet + - an overcurrent protector + - a transfer switch + + If the power source is an inlet, it contains the OID of + an inletLabel in the inletConfigurationTable. The indices of the OID can + then be used to reference other objects in the inlet tables. + + If the power source is an overcurrent protector, it + contains the OID of an overCurrentProtectorLabel in the + overCurrentProtectorConfigurationTable. The indices of the OID can then be + used to reference other objects in the overcurrent protector tables. + + If the power source is a transfer switch, it + contains the OID of a transferSwitchLabel in the + transferSwitchConfigurationTable. The indices of the OID can then be + used to reference other objects in the transfer switch tables." + ::= { wireConfigurationEntry 4 } + +-- wireSensorConfigurationTable: information and settings for wire sensors + +wireSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF WireSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "A list of wire sensor configuration entries. + Note: This feature is no longer used, the table is always empty." + ::= { wires 4 } + +wireSensorConfigurationEntry OBJECT-TYPE + SYNTAX WireSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "An wireSensor entry containing objects for a particular wire Sensor." + INDEX { pduId, wireId, sensorType } + ::= { wireSensorConfigurationTable 1 } + +WireSensorConfigurationEntryStruct ::= SEQUENCE { + wireSensorLogAvailable TruthValue, + wireSensorUnits SensorUnitsEnumeration, + wireSensorDecimalDigits Unsigned32, + wireSensorAccuracy HundredthsOfAPercentage, + wireSensorResolution Unsigned32, + wireSensorTolerance Unsigned32, + wireSensorMaximum Unsigned32, + wireSensorMinimum Unsigned32, + wireSensorHysteresis Unsigned32, + wireSensorStateChangeDelay Unsigned32, + wireSensorLowerCriticalThreshold Unsigned32, + wireSensorLowerWarningThreshold Unsigned32, + wireSensorUpperCriticalThreshold Unsigned32, + wireSensorUpperWarningThreshold Unsigned32, + wireSensorEnabledThresholds BITS + } + +wireSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Is data logging enabled for this sensor?" + ::= { wireSensorConfigurationEntry 4 } + +wireSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 6 } + +wireSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of digits displayed to the right of the decimal point. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 7 } + +wireSensorAccuracy OBJECT-TYPE + SYNTAX HundredthsOfAPercentage + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The accuracy: the maximum relative difference (in percent) between + measurement and the actual value. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 8 } + +wireSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 9 } + +wireSensorTolerance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The tolerance: the maximum difference between measurement and the + actual value. The value of this OID variable should be scaled by + (wireSensorDecimalDigits + 1). For example, if the value is 50 and + wireSensorDecimalDigits is 2, then actual value is 0.05. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 10 } + +wireSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The largest possible value + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 11 } + +wireSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The smallest possible value + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 12 } + +wireSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 13 } + +wireSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 14 } + +wireSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The lower critical threshold + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 21 } + +wireSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The lower non-critical (warning) threshold + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 22 } + +wireSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The upper critical threshold + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 23 } + +wireSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The upper non-critical (warning) threshold + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 24 } + +wireSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorConfigurationEntry 25 } + +-- transferSwitchConfigurationTable: transfer switch information and settings + +transferSwitchConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF TransferSwitchConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of transfer switch configuration entries. The number of + entries is given by the value of transferSwitchCount." + ::= { transferSwitch 3 } + +transferSwitchConfigurationEntry OBJECT-TYPE + SYNTAX TransferSwitchConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for a particular transfer switch." + INDEX { pduId, transferSwitchId } + ::= { transferSwitchConfigurationTable 1 } + +TransferSwitchConfigurationEntryStruct ::= SEQUENCE { + transferSwitchId Integer32, + transferSwitchLabel DisplayString, + transferSwitchName DisplayString, + transferSwitchPreferredInlet Integer32, + transferSwitchPoleCount Integer32, + transferSwitchAutoReTransferEnabled TruthValue, + transferSwitchAutoReTransferWaitTime Unsigned32, + transferSwitchAutoReTransferRequiresPhaseSync TruthValue, + transferSwitchFrontPanelManualTransferButtonEnabled TruthValue, + transferSwitchCapabilities BITS, + transferSwitchPowerSource1 RowPointer, + transferSwitchPowerSource2 RowPointer + } + +transferSwitchId OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each transfer switch. Its value + ranges between 1 and the value of transferSwitchCount." + ::= { transferSwitchConfigurationEntry 1 } + +transferSwitchLabel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The label on the PDU identifying the transfer switch." + ::= { transferSwitchConfigurationEntry 2 } + +transferSwitchName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user-defined name of the transfer switch." + ::= { transferSwitchConfigurationEntry 3 } + +transferSwitchPreferredInlet OBJECT-TYPE + SYNTAX Integer32(1..64) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The preferred inlet. This is the inlet to be selected in case both + inlets have acceptable power." + ::= { transferSwitchConfigurationEntry 4 } + +transferSwitchPoleCount OBJECT-TYPE + SYNTAX Integer32(2..4) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of poles." + ::= { transferSwitchConfigurationEntry 5 } + +transferSwitchAutoReTransferEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables automatic retransfer from the standby inlet to + the preferred inlet after power has been restored." + ::= { transferSwitchConfigurationEntry 20 } + +transferSwitchAutoReTransferWaitTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay for automatic retransfers. Retransfer occurs this many + seconds after the condition causing the original transfer has been + corrected." + ::= { transferSwitchConfigurationEntry 21 } + +transferSwitchAutoReTransferRequiresPhaseSync OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables automatic retransfer in case the two inlets are + not synchronized. If set to True, automatic retransfer is inhibited while + a phase sync alarm is present, i.e. the phase difference between the two + inlets is too large." + ::= { transferSwitchConfigurationEntry 22 } + +transferSwitchFrontPanelManualTransferButtonEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables the Manual Transfer button on the unit's front panel." + ::= { transferSwitchConfigurationEntry 23 } + +transferSwitchCapabilities OBJECT-TYPE + SYNTAX BITS { overloadStatus(32), + inletPhaseSyncAngle(37), + inletPhaseSync(38), + operatingState(39), + activeInlet(40), + switchStatus(47) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit string indicating which sensors are available for the transfer switch." + ::= { transferSwitchConfigurationEntry 24 } + +transferSwitchPowerSource1 OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object allows discovery of how the PDU is wired. It indicates the + transfer switch's first power source, typically a fuse. + + It contains the OID of an overCurrentProtectorLabel in the + overCurrentProtectorConfiguration Table. The indices of the OID can then be + used to reference other objects in the overcurrent protector tables." + ::= { transferSwitchConfigurationEntry 31 } + +transferSwitchPowerSource2 OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object allows discovery of how the PDU is wired. It indicates the + transfer switch's second power source, typically a fuse. + + It contains the OID of an overCurrentProtectorLabel in the + overCurrentProtectorConfiguration Table. The indices of the OID can then be + used to reference other objects in the overcurrent protector tables." + ::= { transferSwitchConfigurationEntry 32 } + +-- transferSwitchPoleConfigurationTable: transfer switch pole information + +transferSwitchPoleConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF TransferSwitchPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of transfer switch pole configuration entries. The number of + entries is given by the value of transferSwitchPoleCount." + ::= { transferSwitch 5 } + +transferSwitchPoleConfigurationEntry OBJECT-TYPE + SYNTAX TransferSwitchPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing parameters for a particular transfer switch pole." + INDEX { pduId, transferSwitchId, transferSwitchPoleIndex } + ::= { transferSwitchPoleConfigurationTable 1 } + +TransferSwitchPoleConfigurationEntryStruct ::= SEQUENCE { + transferSwitchPoleIndex Integer32, + transferSwitchPoleLine LineEnumeration, + transferSwitchPoleIn1Node Integer32, + transferSwitchPoleIn2Node Integer32, + transferSwitchPoleOutNode Integer32 + } + +transferSwitchPoleIndex OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each transfer switch pole. Its value + ranges between 1 and the value of transferSwitchPoleCount." + ::= { transferSwitchPoleConfigurationEntry 1 } + +transferSwitchPoleLine OBJECT-TYPE + SYNTAX LineEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The phase for this transfer switch pole." + ::= { transferSwitchPoleConfigurationEntry 2 } + +transferSwitchPoleIn1Node OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The node to which this transfer switch pole input 1 is connected" + ::= { transferSwitchPoleConfigurationEntry 3 } + +transferSwitchPoleIn2Node OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The node to which this transfer switch pole input 2 is connected" + ::= { transferSwitchPoleConfigurationEntry 4 } + +transferSwitchPoleOutNode OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The node to which this transfer switch pole output is connected" + ::= { transferSwitchPoleConfigurationEntry 5 } + +-- transferSwitchSensorConfigurationTable: information and settings for transfer switch sensors + +transferSwitchSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF TransferSwitchSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of transfer switch sensor configuration entries." + ::= { transferSwitch 4 } + +transferSwitchSensorConfigurationEntry OBJECT-TYPE + SYNTAX TransferSwitchSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing parameters for a transfer switch sensor." + INDEX { pduId, transferSwitchId, sensorType } + ::= { transferSwitchSensorConfigurationTable 1 } + +TransferSwitchSensorConfigurationEntryStruct ::= SEQUENCE { + transferSwitchSensorLogAvailable TruthValue, + transferSwitchSensorUnits SensorUnitsEnumeration, + transferSwitchSensorDecimalDigits Unsigned32, + transferSwitchSensorAccuracy HundredthsOfAPercentage, + transferSwitchSensorResolution Unsigned32, + transferSwitchSensorTolerance Unsigned32, + transferSwitchSensorMaximum Unsigned32, + transferSwitchSensorMinimum Unsigned32, + transferSwitchSensorHysteresis Unsigned32, + transferSwitchSensorStateChangeDelay Unsigned32, + transferSwitchSensorLowerCriticalThreshold Unsigned32, + transferSwitchSensorLowerWarningThreshold Unsigned32, + transferSwitchSensorUpperCriticalThreshold Unsigned32, + transferSwitchSensorUpperWarningThreshold Unsigned32, + transferSwitchSensorEnabledThresholds BITS, + transferSwitchSensorSignedMaximum Integer32, + transferSwitchSensorSignedMinimum Integer32, + transferSwitchSensorSignedLowerCriticalThreshold Integer32, + transferSwitchSensorSignedLowerWarningThreshold Integer32, + transferSwitchSensorSignedUpperCriticalThreshold Integer32, + transferSwitchSensorSignedUpperWarningThreshold Integer32 + } + +transferSwitchSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for this sensor?" + ::= { transferSwitchSensorConfigurationEntry 4 } + +transferSwitchSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 6 } + +transferSwitchSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 7 } + +transferSwitchSensorAccuracy OBJECT-TYPE + SYNTAX HundredthsOfAPercentage + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The accuracy: how close (in percent) the measurement is to the actual value + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 8 } + +transferSwitchSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 9 } + +transferSwitchSensorTolerance OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The tolerance: the maximum difference between measurement and the + actual value. The value of this OID variable should be scaled by + (transferSwitchSensorDecimalDigits + 1). For example, if the value is 50 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.05. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 10 } + +transferSwitchSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled maximum exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 11 } + +transferSwitchSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 12 } + +transferSwitchSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 13 } + +transferSwitchSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 14 } + +transferSwitchSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 21 } + +transferSwitchSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 22 } + +transferSwitchSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 23 } + +transferSwitchSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 24 } + +transferSwitchSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 25 } + +transferSwitchSensorSignedMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 26 } + +transferSwitchSensorSignedMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This value determines whether to use the signed or unsigned threshold + and value columns: If the minimum is below zero the sensor can have + negative readings and the signed columns should be used. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 27 } + +transferSwitchSensorSignedLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 28 } + +transferSwitchSensorSignedLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 29 } + +transferSwitchSensorSignedUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 30 } + +transferSwitchSensorSignedUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorConfigurationEntry 31 } + +-- powerMeterConfigurationTable: BCM2/PMC power meter and panel information + +powerMeterConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF PowerMeterConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of power meter and panel configuration entries. + Note: Also see inlet tables for settings and sensor information." + ::= { powerMeter 2 } + +powerMeterConfigurationEntry OBJECT-TYPE + SYNTAX PowerMeterConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing configuration objects for power meters and panels." + INDEX { pduId } + ::= { powerMeterConfigurationTable 1 } + +PowerMeterConfigurationEntryStruct ::= SEQUENCE { + powerMeterPhaseCTRating Unsigned32, + powerMeterNeutralCTRating Unsigned32, + powerMeterEarthCTRating Unsigned32, + powerMeterBranchCount Unsigned32, + powerMeterPanelPositions Integer32, + powerMeterPanelLayout PanelLayoutEnumeration, + powerMeterPanelNumbering PanelNumberingEnumeration, + powerMeterType PowerMeterTypeEnumeration + } + +powerMeterPhaseCTRating OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The rating of the phase CT in Amps, or 0 if no CT is present. + At present, read-only access; + see MIN-ACCESS in MODULE-COMPLIANCE ModulecomplianceRev2" + ::= { powerMeterConfigurationEntry 2 } + +powerMeterNeutralCTRating OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The rating of the neutral CT in Amps, or 0 if no CT is present. + At present, read-only access; + see MIN-ACCESS in MODULE-COMPLIANCE ModulecomplianceRev2" + ::= { powerMeterConfigurationEntry 3 } + +powerMeterEarthCTRating OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The rating of the earth CT in Amps, or 0 if no CT is present. + At present, read-only access; + see MIN-ACCESS in MODULE-COMPLIANCE ModulecomplianceRev2" + ::= { powerMeterConfigurationEntry 4 } + +powerMeterBranchCount OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of circuits supported by the panel. + + This can be used to distinguish between panels (>0) and power meters (0). + See circuitCount for the number of currently defined circuits." + ::= { powerMeterConfigurationEntry 5 } + +powerMeterPanelPositions OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of circuit positions in the panel. + Its value is specified by the user when configuring a panel" + ::= { powerMeterConfigurationEntry 6 } + +powerMeterPanelLayout OBJECT-TYPE + SYNTAX PanelLayoutEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The panel circuit position layout: one or two columns. + This is valid only for panels, the value is -1 for power meters." + ::= { powerMeterConfigurationEntry 7 } + +powerMeterPanelNumbering OBJECT-TYPE + SYNTAX PanelNumberingEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The panel circuit position numbering scheme: odd/even or sequential. + This is valid only for panels, the value is -1 for power meters." + ::= { powerMeterConfigurationEntry 8 } + +powerMeterType OBJECT-TYPE + SYNTAX PowerMeterTypeEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The power meter type: 3-phase, single-phase or split-phase." + ::= { powerMeterConfigurationEntry 9 } + +-- circuitConfigurationTable: BCM2/PMC branch circuit information + +circuitConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF CircuitConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of circuit configuration entries. The number of + entries is given by the value of panelCircuitPositionCount." + ::= { circuit 2 } + +circuitConfigurationEntry OBJECT-TYPE + SYNTAX CircuitConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing configuration objects for the circuit." + INDEX { pduId, circuitId } + ::= { circuitConfigurationTable 1 } + +CircuitConfigurationEntryStruct ::= SEQUENCE { + circuitId Integer32, + circuitPoleCount Integer32, + circuitName DisplayString, + circuitType CircuitTypeEnumeration, + circuitRatedCurrent Unsigned32, + circuitCTRating Unsigned32, + circuitCapabilities BITS, + circuitPoleCapabilities BITS, + circuitPowerSource RowPointer + } + +circuitId OBJECT-TYPE + SYNTAX Integer32(1..1024) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each circuit. Its value is the smallest panel + position occupied by the circuit." + ::= { circuitConfigurationEntry 1 } + +circuitPoleCount OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of panel positions occupied by the circuit." + ::= { circuitConfigurationEntry 2 } + +circuitName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The user-defined name for the circuit. + At present, read-only access; + see MIN-ACCESS in MODULE-COMPLIANCE ModulecomplianceRev2" + ::= { circuitConfigurationEntry 3 } + +circuitType OBJECT-TYPE + SYNTAX CircuitTypeEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The circuit type: line-line, line-neutral, line-line-neutral or 3-phase" + ::= { circuitConfigurationEntry 4 } + +circuitRatedCurrent OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The rating of the breaker for the circuit in Amps. + At present, read-only access; + see MIN-ACCESS in MODULE-COMPLIANCE ModulecomplianceRev2" + ::= { circuitConfigurationEntry 5 } + +circuitCTRating OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The rating of the CTs metering this circuit in Amps. + At present, read-only access; + see MIN-ACCESS in MODULE-COMPLIANCE ModulecomplianceRev2" + ::= { circuitConfigurationEntry 6 } + +circuitCapabilities OBJECT-TYPE + SYNTAX BITS { rmsCurrent(0), + peakCurrent(1), + unbalancedCurrent(2), + rmsVoltage(3), + activePower(4), + apparentPower(5), + powerFactor(6), + activeEnergy(7), + apparentEnergy(8), + surgeProtectorStatus(21), + frequency(22), + phaseAngle(23), + residualCurrent(25), + rcmState(26), + reactivePower(28), + powerQuality(31), + displacementPowerFactor(34) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit string indicating which sensors are available for the circuit." + ::= { circuitConfigurationEntry 7 } + +circuitPoleCapabilities OBJECT-TYPE + SYNTAX BITS { rmsCurrent(0), + peakCurrent(1), + rmsVoltage(3), + activePower(4), + apparentPower(5), + powerFactor(6), + activeEnergy(7), + apparentEnergy(8), + phaseAngle(23), + rmsVoltageLN(24), + reactivePower(28), + displacementPowerFactor(34) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit string indicating which sensors are available for each circuit pole." + ::= { circuitConfigurationEntry 8 } + +circuitPowerSource OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object allows discovery of how the circuit is wired. It indicates the + circuit's power source, typically an inlet. + + It contains the OID of an inletLabel in the inletConfigurationTable. + The indices of the OID can then be used to reference other objects in the + inlet and power meter tables." + ::= { circuitConfigurationEntry 9 } + +-- circuitPoleConfigurationTable: BCM2/PMC branch circuit pole information + +circuitPoleConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF CircuitPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of branch circuit pole configuration entries. The number of + entries is given by the value of circuitPoleCount for the circuit." + ::= { circuit 3 } + +circuitPoleConfigurationEntry OBJECT-TYPE + SYNTAX CircuitPoleConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing configuration objects for the circuit poles." + INDEX { pduId, circuitId, circuitPoleId } + ::= { circuitPoleConfigurationTable 1 } + +CircuitPoleConfigurationEntryStruct ::= SEQUENCE { + circuitPoleId Integer32, + circuitPolePanelPosition Integer32, + circuitPoleCTNumber Integer32, + circuitPolePhase PhaseEnumeration + } + +circuitPoleId OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each circuit pole. Its value + ranges between 1 and the value of circuitPoleCount." + ::= { circuitPoleConfigurationEntry 1 } + +circuitPolePanelPosition OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The panel position for this pole." + ::= { circuitPoleConfigurationEntry 2 } + +circuitPoleCTNumber OBJECT-TYPE + SYNTAX Integer32(0..256) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The CT number for this circuit pole, or 0 if no CT is present. + At present, read-only access; + see MIN-ACCESS in MODULE-COMPLIANCE ModulecomplianceRev2" + ::= { circuitPoleConfigurationEntry 3 } + +circuitPolePhase OBJECT-TYPE + SYNTAX PhaseEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The phase for this circuit pole. + At present, read-only access; + see MIN-ACCESS in MODULE-COMPLIANCE ModulecomplianceRev2" + ::= { circuitPoleConfigurationEntry 4 } + +-- circuitSensorConfigurationTable: information and settings for BCM2/PMC circuit sensors + +circuitSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF CircuitSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of configuration entries for branch circuit sensor." + ::= { circuit 4 } + +circuitSensorConfigurationEntry OBJECT-TYPE + SYNTAX CircuitSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for configuring a branch circuit sensor." + INDEX { pduId, circuitId, sensorType } + ::= { circuitSensorConfigurationTable 1 } + +CircuitSensorConfigurationEntryStruct ::= SEQUENCE { + circuitSensorLogAvailable TruthValue, + circuitSensorUnits SensorUnitsEnumeration, + circuitSensorDecimalDigits Unsigned32, + circuitSensorResolution Unsigned32, + circuitSensorMaximum Unsigned32, + circuitSensorMinimum Unsigned32, + circuitSensorHysteresis Unsigned32, + circuitSensorStateChangeDelay Unsigned32, + circuitSensorLowerCriticalThreshold Unsigned32, + circuitSensorLowerWarningThreshold Unsigned32, + circuitSensorUpperCriticalThreshold Unsigned32, + circuitSensorUpperWarningThreshold Unsigned32, + circuitSensorEnabledThresholds BITS, + circuitSensorSignedMaximum Integer32, + circuitSensorSignedMinimum Integer32, + circuitSensorSignedLowerCriticalThreshold Integer32, + circuitSensorSignedLowerWarningThreshold Integer32, + circuitSensorSignedUpperCriticalThreshold Integer32, + circuitSensorSignedUpperWarningThreshold Integer32 + } + +circuitSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for the sensor?" + ::= { circuitSensorConfigurationEntry 4 } + +circuitSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 6 } + +circuitSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 7 } + +circuitSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 9 } + +circuitSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled maximum exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 11 } + +circuitSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 12 } + +circuitSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 13 } + +circuitSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 14 } + +circuitSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 21 } + +circuitSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 22 } + +circuitSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 23 } + +circuitSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 24 } + +circuitSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 25 } + +circuitSensorSignedMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 26 } + +circuitSensorSignedMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value determines whether to use the signed or unsigned threshold + and value columns: If the minimum is below zero the sensor can have + negative readings and the signed columns should be used. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 27 } + +circuitSensorSignedLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 28 } + +circuitSensorSignedLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 29 } + +circuitSensorSignedUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 30 } + +circuitSensorSignedUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorConfigurationEntry 31 } + +-- circuitPoleSensorConfigurationTable: information and settings for BCM2/PMC circuit pole sensors + +circuitPoleSensorConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF CircuitPoleSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of configuration entries for a circuit's pole sensors." + ::= { circuit 6 } + +circuitPoleSensorConfigurationEntry OBJECT-TYPE + SYNTAX CircuitPoleSensorConfigurationEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for configuring a circuit pole sensor." + INDEX { pduId, circuitId, circuitPoleId, sensorType } + ::= { circuitPoleSensorConfigurationTable 1 } + +CircuitPoleSensorConfigurationEntryStruct ::= SEQUENCE { + circuitPoleSensorLogAvailable TruthValue, + circuitPoleSensorUnits SensorUnitsEnumeration, + circuitPoleSensorDecimalDigits Unsigned32, + circuitPoleSensorResolution Unsigned32, + circuitPoleSensorMaximum Unsigned32, + circuitPoleSensorMinimum Unsigned32, + circuitPoleSensorHysteresis Unsigned32, + circuitPoleSensorStateChangeDelay Unsigned32, + circuitPoleSensorLowerCriticalThreshold Unsigned32, + circuitPoleSensorLowerWarningThreshold Unsigned32, + circuitPoleSensorUpperCriticalThreshold Unsigned32, + circuitPoleSensorUpperWarningThreshold Unsigned32, + circuitPoleSensorEnabledThresholds BITS, + circuitPoleSensorSignedMaximum Integer32, + circuitPoleSensorSignedMinimum Integer32, + circuitPoleSensorSignedLowerCriticalThreshold Integer32, + circuitPoleSensorSignedLowerWarningThreshold Integer32, + circuitPoleSensorSignedUpperCriticalThreshold Integer32, + circuitPoleSensorSignedUpperWarningThreshold Integer32 + } + +circuitPoleSensorLogAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Is data logging enabled for the sensor?" + ::= { circuitPoleSensorConfigurationEntry 4 } + +circuitPoleSensorUnits OBJECT-TYPE + SYNTAX SensorUnitsEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unit in which the sensor reading is reported. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 6 } + +circuitPoleSensorDecimalDigits OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of digits displayed to the right of the decimal point. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 7 } + +circuitPoleSensorResolution OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The resolution: the minimum difference between any two measured values + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 9 } + +circuitPoleSensorMaximum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled maximum exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 11 } + +circuitPoleSensorMinimum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 12 } + +circuitPoleSensorHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The hysteresis used when crossing a threshold towards the normal state. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 13 } + +circuitPoleSensorStateChangeDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The delay measured in samples before a state is asserted. + If the value is zero, then the state is asserted as soon as + it is detected; if it is non-zero, say n, then the assertion + condition must exist for n+1 consecutive samples before the + event is reported. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 14 } + +circuitPoleSensorLowerCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 21 } + +circuitPoleSensorLowerWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 22 } + +circuitPoleSensorUpperCriticalThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 23 } + +circuitPoleSensorUpperWarningThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is clamped if the scaled threshold exceeds 4294967295. It + is undefined for sensors which can have negative readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 24 } + +circuitPoleSensorEnabledThresholds OBJECT-TYPE + SYNTAX BITS { lowerCritical(0), + lowerWarning(1), + upperWarning(2), + upperCritical(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit string indicating which thresholds are enabled. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 25 } + +circuitPoleSensorSignedMaximum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest possible reading as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 26 } + +circuitPoleSensorSignedMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The smallest possible reading as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value determines whether to use the signed or unsigned threshold + and value columns: If the minimum is below zero the sensor can have + negative readings and the signed columns should be used. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 27 } + +circuitPoleSensorSignedLowerCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower critical threshold as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 28 } + +circuitPoleSensorSignedLowerWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lower warning threshold as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 29 } + +circuitPoleSensorSignedUpperCriticalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper critical threshold as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 30 } + +circuitPoleSensorSignedUpperWarningThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The upper warning threshold as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + The value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorConfigurationEntry 31 } + +-- peripheralDevicePackageTable: peripheral device package information + +peripheralDevicePackageTable OBJECT-TYPE + SYNTAX SEQUENCE OF PeripheralDevicePackageEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of entries for the peripheral device packages connected to a PDU. + The number of entries is given by the value of peripheralDevicePackagesCount. + A peripheral device package contains one or more sensors or actuators in a + single enclosure." + ::= { externalSensors 5 } + +peripheralDevicePackageEntry OBJECT-TYPE + SYNTAX PeripheralDevicePackageEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for a peripheral device package." + INDEX { pduId, peripheralDevicePackageId } + ::= { peripheralDevicePackageTable 1 } + +PeripheralDevicePackageEntryStruct ::= SEQUENCE { + peripheralDevicePackageId Integer32, + peripheralDevicePackageSerialNumber DisplayString, + peripheralDevicePackageModel DisplayString, + peripheralDevicePackageFirmwareVersion DisplayString, + peripheralDevicePackageMinFirmwareVersion DisplayString, + peripheralDevicePackageFirmwareTimeStamp Unsigned32, + peripheralDevicePackagePosition DisplayString, + peripheralDevicePackageState DisplayString + } + +peripheralDevicePackageId OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each peripheral device package." + ::= { peripheralDevicePackageEntry 1 } + +peripheralDevicePackageSerialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peripheral device package serial number." + ::= { peripheralDevicePackageEntry 3 } + +peripheralDevicePackageModel OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peripheral device package model. + Examples are DX-D2C6, DPX2-T1, DPX2-T1H1, DPX2-T2H1, DPX2-T3H1" + ::= { peripheralDevicePackageEntry 4 } + +peripheralDevicePackageFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peripheral device package firmware version." + ::= { peripheralDevicePackageEntry 5 } + +peripheralDevicePackageMinFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peripheral device package minimum firmware version. + This field may be empty. If it is not empty, then it shall not be possible + to downgrade the peripheral device firmware to an older version." + ::= { peripheralDevicePackageEntry 6 } + +peripheralDevicePackageFirmwareTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time when the peripheral device package firmware was last updated. + It is measured in seconds since January 1, 1970 (midnight UTC/GMT)." + ::= { peripheralDevicePackageEntry 7 } + +peripheralDevicePackagePosition OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The position of the package in the bus topology. + The format is a semicolon separated list of Keyword:value pairs. + Keyword can be one of the following: + ONBOARD, DEVICE-1WIREPORT, HUBPORT, CHAIN-POSITION + + Examples: + 1) Onboard Sensor + ONBOARD:CC1 + 2) Old sensor connected to device 1-wire port + DEVICE-1WIREPORT:2 + 3) New-style sensor connected to device 1-wire port + DEVICE-1WIREPORT:2;CHAIN-POSITION:3 + 4) New-style sensor connected to hub port 3 + DEVICE-1WIREPORT:2;CHAIN-POSITION:1;HUBPORT:3;CHAIN-POSITION:1 + 5) Old-style sensor connected to end of new-style sensor chain + DEVICE-1WIREPORT:2;" + ::= { peripheralDevicePackageEntry 8 } + +peripheralDevicePackageState OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the package." + ::= { peripheralDevicePackageEntry 9 } + +-- sensor data log tables + +logIndexTable OBJECT-TYPE + SYNTAX SEQUENCE OF LogIndexEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing current indices for the data log buffer." + ::= { logUnit 1 } + +logIndexEntry OBJECT-TYPE + SYNTAX LogIndexEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing the current indices for a PDU's data log buffer." + INDEX { pduId } + ::= { logIndexTable 1 } + +LogIndexEntryStruct ::= SEQUENCE { + oldestLogID Integer32, + newestLogID Integer32 + } + +oldestLogID OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the oldest data in the buffer for this PDU." + ::= { logIndexEntry 2 } + +newestLogID OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the newest data in the buffer for this PDU." + ::= { logIndexEntry 3 } + +-- logTimeStampTable: timestamp information for each data log entry + +logTimeStampTable OBJECT-TYPE + SYNTAX SEQUENCE OF LogTimeStampEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of entries containing the timestamps of the entries in the log." + ::= { logUnit 2 } + +logTimeStampEntry OBJECT-TYPE + SYNTAX LogTimeStampEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing the timestamp for log entries." + INDEX { pduId, logIndex } + ::= { logTimeStampTable 1 } + +LogTimeStampEntryStruct ::= SEQUENCE { + logIndex Integer32, + logTimeStamp Unsigned32 + } + +logIndex OBJECT-TYPE + SYNTAX Integer32(1..256) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each entry in the log. Its value + ranges between 1 and the value of logSize." + ::= { logTimeStampEntry 1 } + +logTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time when the data was collected. It is measured in seconds since + January 1, 1970 (midnight UTC/GMT)." + ::= { logTimeStampEntry 2 } + +-- unitSensorLogTable: unit-level sensor log data + +unitSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF UnitSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of unit sensor entries in the log." + ::= { logUnit 3 } + +unitSensorLogEntry OBJECT-TYPE + SYNTAX UnitSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for a unit sensor." + INDEX { pduId, sensorType, logIndex } + ::= { unitSensorLogTable 1 } + +UnitSensorLogEntryStruct ::= SEQUENCE { + logUnitSensorDataAvailable TruthValue, + logUnitSensorState SensorStateEnumeration, + logUnitSensorAvgValue Unsigned32, + logUnitSensorMaxValue Unsigned32, + logUnitSensorMinValue Unsigned32, + logUnitSensorSignedAvgValue Integer32, + logUnitSensorSignedMaxValue Integer32, + logUnitSensorSignedMinValue Integer32 + } + +logUnitSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { unitSensorLogEntry 2 } + +logUnitSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { unitSensorLogEntry 3 } + +logUnitSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { unitSensorLogEntry 4 } + +logUnitSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { unitSensorLogEntry 5 } + +logUnitSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { unitSensorLogEntry 6 } + +logUnitSensorSignedAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { unitSensorLogEntry 7 } + +logUnitSensorSignedMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { unitSensorLogEntry 8 } + +logUnitSensorSignedMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { unitSensorLogEntry 9 } + +-- inletSensorLogTable: inlet sensor log data + +inletSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF InletSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of inlet sensor entries in the log." + ::= { logInlet 3 } + +inletSensorLogEntry OBJECT-TYPE + SYNTAX InletSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for an inlet sensor." + INDEX { pduId, inletId, sensorType, logIndex } + ::= { inletSensorLogTable 1 } + +InletSensorLogEntryStruct ::= SEQUENCE { + logInletSensorDataAvailable TruthValue, + logInletSensorState SensorStateEnumeration, + logInletSensorAvgValue Unsigned32, + logInletSensorMaxValue Unsigned32, + logInletSensorMinValue Unsigned32, + logInletSensorSignedAvgValue Integer32, + logInletSensorSignedMaxValue Integer32, + logInletSensorSignedMinValue Integer32 + } + +logInletSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { inletSensorLogEntry 2 } + +logInletSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { inletSensorLogEntry 3 } + +logInletSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { inletSensorLogEntry 4 } + +logInletSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { inletSensorLogEntry 5 } + +logInletSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { inletSensorLogEntry 6 } + +logInletSensorSignedAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { inletSensorLogEntry 7 } + +logInletSensorSignedMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { inletSensorLogEntry 8 } + +logInletSensorSignedMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { inletSensorLogEntry 9 } + +-- inletPoleSensorLogTable: inlet pole sensor log data + +inletPoleSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF InletPoleSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of inletPole sensor entries in the log." + ::= { logInlet 4 } + +inletPoleSensorLogEntry OBJECT-TYPE + SYNTAX InletPoleSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for an inlet pole sensor." + INDEX { pduId, inletId, inletPoleIndex, sensorType, logIndex } + ::= { inletPoleSensorLogTable 1 } + +InletPoleSensorLogEntryStruct ::= SEQUENCE { + logInletPoleSensorDataAvailable TruthValue, + logInletPoleSensorState SensorStateEnumeration, + logInletPoleSensorAvgValue Unsigned32, + logInletPoleSensorMaxValue Unsigned32, + logInletPoleSensorMinValue Unsigned32, + logInletPoleSensorSignedAvgValue Integer32, + logInletPoleSensorSignedMaxValue Integer32, + logInletPoleSensorSignedMinValue Integer32 + } + +logInletPoleSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { inletPoleSensorLogEntry 2 } + +logInletPoleSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { inletPoleSensorLogEntry 3 } + +logInletPoleSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { inletPoleSensorLogEntry 4 } + +logInletPoleSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { inletPoleSensorLogEntry 5 } + +logInletPoleSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { inletPoleSensorLogEntry 6 } + +logInletPoleSensorSignedAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { inletPoleSensorLogEntry 7 } + +logInletPoleSensorSignedMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { inletPoleSensorLogEntry 8 } + +logInletPoleSensorSignedMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { inletPoleSensorLogEntry 9 } + +-- outletSensorLogTable: outlet sensor log data + +outletSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of outlet sensor entries in the log." + ::= { logOutlet 3 } + +outletSensorLogEntry OBJECT-TYPE + SYNTAX OutletSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for an outlet sensor." + INDEX { pduId, outletId, sensorType, logIndex } + ::= { outletSensorLogTable 1 } + +OutletSensorLogEntryStruct ::= SEQUENCE { + logOutletSensorDataAvailable TruthValue, + logOutletSensorState SensorStateEnumeration, + logOutletSensorAvgValue Unsigned32, + logOutletSensorMaxValue Unsigned32, + logOutletSensorMinValue Unsigned32, + logOutletSensorSignedAvgValue Integer32, + logOutletSensorSignedMaxValue Integer32, + logOutletSensorSignedMinValue Integer32 + } + +logOutletSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { outletSensorLogEntry 2 } + +logOutletSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { outletSensorLogEntry 3 } + +logOutletSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { outletSensorLogEntry 4 } + +logOutletSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { outletSensorLogEntry 5 } + +logOutletSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { outletSensorLogEntry 6 } + +logOutletSensorSignedAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { outletSensorLogEntry 7 } + +logOutletSensorSignedMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { outletSensorLogEntry 8 } + +logOutletSensorSignedMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { outletSensorLogEntry 9 } + +-- outletPoleSensorLogTable: outlet pole sensor log data + +outletPoleSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletPoleSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of outlet pole sensor entries in the log." + ::= { logOutlet 4 } + +outletPoleSensorLogEntry OBJECT-TYPE + SYNTAX OutletPoleSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for an outlet pole sensor." + INDEX { pduId, outletId, outletPoleIndex, sensorType, logIndex } + ::= { outletPoleSensorLogTable 1 } + +OutletPoleSensorLogEntryStruct ::= SEQUENCE { + logOutletPoleSensorDataAvailable TruthValue, + logOutletPoleSensorState SensorStateEnumeration, + logOutletPoleSensorAvgValue Unsigned32, + logOutletPoleSensorMaxValue Unsigned32, + logOutletPoleSensorMinValue Unsigned32, + logOutletPoleSensorSignedAvgValue Integer32, + logOutletPoleSensorSignedMaxValue Integer32, + logOutletPoleSensorSignedMinValue Integer32 + } + +logOutletPoleSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { outletPoleSensorLogEntry 2 } + +logOutletPoleSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { outletPoleSensorLogEntry 3 } + +logOutletPoleSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { outletPoleSensorLogEntry 4 } + +logOutletPoleSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { outletPoleSensorLogEntry 5 } + +logOutletPoleSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { outletPoleSensorLogEntry 6 } + +logOutletPoleSensorSignedAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { outletPoleSensorLogEntry 7 } + +logOutletPoleSensorSignedMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { outletPoleSensorLogEntry 8 } + +logOutletPoleSensorSignedMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { outletPoleSensorLogEntry 9 } + +-- overCurrentProtectorSensorLogTable: overcurrent protector sensor log data + +overCurrentProtectorSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF OverCurrentProtectorSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of overcurrent protector sensor entries in the log." + ::= { logOverCurrentProtector 3 } + +overCurrentProtectorSensorLogEntry OBJECT-TYPE + SYNTAX OverCurrentProtectorSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for an overcurrent protector sensor." + INDEX { pduId, overCurrentProtectorIndex, sensorType, logIndex } + ::= { overCurrentProtectorSensorLogTable 1 } + +OverCurrentProtectorSensorLogEntryStruct ::= SEQUENCE { + logOverCurrentProtectorSensorDataAvailable TruthValue, + logOverCurrentProtectorSensorState SensorStateEnumeration, + logOverCurrentProtectorSensorAvgValue Unsigned32, + logOverCurrentProtectorSensorMaxValue Unsigned32, + logOverCurrentProtectorSensorMinValue Unsigned32, + logOverCurrentProtectorSensorSignedAvgValue Integer32, + logOverCurrentProtectorSensorSignedMaxValue Integer32, + logOverCurrentProtectorSensorSignedMinValue Integer32 + } + +logOverCurrentProtectorSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { overCurrentProtectorSensorLogEntry 2 } + +logOverCurrentProtectorSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { overCurrentProtectorSensorLogEntry 3 } + +logOverCurrentProtectorSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorLogEntry 4 } + +logOverCurrentProtectorSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorLogEntry 5 } + +logOverCurrentProtectorSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorLogEntry 6 } + +logOverCurrentProtectorSensorSignedAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorLogEntry 7 } + +logOverCurrentProtectorSensorSignedMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorLogEntry 8 } + +logOverCurrentProtectorSensorSignedMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorLogEntry 9 } + +-- externalSensorLogTable: external sensor log data + +externalSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExternalSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of external sensor entries in the log." + ::= { logExternalSensor 3 } + +externalSensorLogEntry OBJECT-TYPE + SYNTAX ExternalSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for an external sensor." + INDEX { pduId, sensorID, logIndex } + ::= { externalSensorLogTable 1 } + +ExternalSensorLogEntryStruct ::= SEQUENCE { + logExternalSensorDataAvailable TruthValue, + logExternalSensorState SensorStateEnumeration, + logExternalSensorAvgValue Integer32, + logExternalSensorMaxValue Integer32, + logExternalSensorMinValue Integer32 + } + +logExternalSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { externalSensorLogEntry 2 } + +logExternalSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { externalSensorLogEntry 3 } + +logExternalSensorAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading average value. + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This object does not apply to sensors without numerical reading." + ::= { externalSensorLogEntry 4 } + +logExternalSensorMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading maximum value. + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This object does not apply to sensors without numerical reading." + ::= { externalSensorLogEntry 5 } + +logExternalSensorMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading minimum value. + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This object does not apply to sensors without numerical reading." + ::= { externalSensorLogEntry 6 } + +-- wireSensorLogTable: wire sensor log data + +wireSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF WireSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "A list of wire sensor entries in the log. + Note: This feature is no longer used, the table is always empty." + ::= { logWire 3 } + +wireSensorLogEntry OBJECT-TYPE + SYNTAX WireSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "An entry containing log objects for a wire sensor." + INDEX { pduId, wireId, sensorType, logIndex } + ::= { wireSensorLogTable 1 } + +WireSensorLogEntryStruct ::= SEQUENCE { + logWireSensorDataAvailable TruthValue, + logWireSensorState SensorStateEnumeration, + logWireSensorAvgValue Unsigned32, + logWireSensorMaxValue Unsigned32, + logWireSensorMinValue Unsigned32 + } + +logWireSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { wireSensorLogEntry 2 } + +logWireSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { wireSensorLogEntry 3 } + +logWireSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The sensor reading average value. + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the value exceeds 4294967295. + This object does not apply to sensors without numerical reading." + ::= { wireSensorLogEntry 4 } + +logWireSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The sensor reading maximum value. + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the value exceeds 4294967295. + This object does not apply to sensors without numerical reading." + ::= { wireSensorLogEntry 5 } + +logWireSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The sensor reading minimum value. + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the value exceeds 4294967295. + This object does not apply to sensors without numerical reading." + ::= { wireSensorLogEntry 6 } + +-- transferSwitchSensorLogTable: transfer switch sensor log data + +transferSwitchSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF TransferSwitchSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of transfer switch sensor entries in the log." + ::= { logTransferSwitch 3 } + +transferSwitchSensorLogEntry OBJECT-TYPE + SYNTAX TransferSwitchSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for a transfer switch sensor." + INDEX { pduId, transferSwitchId, sensorType, logIndex } + ::= { transferSwitchSensorLogTable 1 } + +TransferSwitchSensorLogEntryStruct ::= SEQUENCE { + logTransferSwitchSensorDataAvailable TruthValue, + logTransferSwitchSensorState SensorStateEnumeration, + logTransferSwitchSensorAvgValue Unsigned32, + logTransferSwitchSensorMaxValue Unsigned32, + logTransferSwitchSensorMinValue Unsigned32, + logTransferSwitchSensorSignedAvgValue Integer32, + logTransferSwitchSensorSignedMaxValue Integer32, + logTransferSwitchSensorSignedMinValue Integer32 + } + +logTransferSwitchSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { transferSwitchSensorLogEntry 2 } + +logTransferSwitchSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { transferSwitchSensorLogEntry 3 } + +logTransferSwitchSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { transferSwitchSensorLogEntry 4 } + +logTransferSwitchSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { transferSwitchSensorLogEntry 5 } + +logTransferSwitchSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { transferSwitchSensorLogEntry 6 } + +logTransferSwitchSensorSignedAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { transferSwitchSensorLogEntry 7 } + +logTransferSwitchSensorSignedMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { transferSwitchSensorLogEntry 8 } + +logTransferSwitchSensorSignedMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { transferSwitchSensorLogEntry 9 } + +-- circuitSensorLogTable: BCM2/PMC circuit sensor log data + +circuitSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF CircuitSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of circuit sensor entries in the log." + ::= { logCircuit 3 } + +circuitSensorLogEntry OBJECT-TYPE + SYNTAX CircuitSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for a circuit sensor." + INDEX { pduId, circuitId, sensorType, logIndex } + ::= { circuitSensorLogTable 1 } + +CircuitSensorLogEntryStruct ::= SEQUENCE { + logCircuitSensorDataAvailable TruthValue, + logCircuitSensorState SensorStateEnumeration, + logCircuitSensorAvgValue Unsigned32, + logCircuitSensorMaxValue Unsigned32, + logCircuitSensorMinValue Unsigned32, + logCircuitSensorSignedAvgValue Integer32, + logCircuitSensorSignedMaxValue Integer32, + logCircuitSensorSignedMinValue Integer32 + } + +logCircuitSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { circuitSensorLogEntry 2 } + +logCircuitSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { circuitSensorLogEntry 3 } + +logCircuitSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { circuitSensorLogEntry 4 } + +logCircuitSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { circuitSensorLogEntry 5 } + +logCircuitSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { circuitSensorLogEntry 6 } + +logCircuitSensorSignedAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { circuitSensorLogEntry 7 } + +logCircuitSensorSignedMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { circuitSensorLogEntry 8 } + +logCircuitSensorSignedMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { circuitSensorLogEntry 9 } + +-- circuitPoleSensorLogTable: BCM2/PMC circuit pole sensor log data + +circuitPoleSensorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF CircuitPoleSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of circuit pole sensor entries in the log." + ::= { logCircuit 5 } + +circuitPoleSensorLogEntry OBJECT-TYPE + SYNTAX CircuitPoleSensorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing log objects for a circuit pole sensor." + INDEX { pduId, circuitId, circuitPoleId, sensorType, logIndex } + ::= { circuitPoleSensorLogTable 1 } + +CircuitPoleSensorLogEntryStruct ::= SEQUENCE { + logCircuitPoleSensorDataAvailable TruthValue, + logCircuitPoleSensorState SensorStateEnumeration, + logCircuitPoleSensorAvgValue Unsigned32, + logCircuitPoleSensorMaxValue Unsigned32, + logCircuitPoleSensorMinValue Unsigned32, + logCircuitPoleSensorSignedAvgValue Integer32, + logCircuitPoleSensorSignedMaxValue Integer32, + logCircuitPoleSensorSignedMinValue Integer32 + } + +logCircuitPoleSensorDataAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is data available for this sensor during this measurement period?" + ::= { circuitPoleSensorLogEntry 2 } + +logCircuitPoleSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most critical sensor state during this measurement period." + ::= { circuitPoleSensorLogEntry 3 } + +logCircuitPoleSensorAvgValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { circuitPoleSensorLogEntry 4 } + +logCircuitPoleSensorMaxValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { circuitPoleSensorLogEntry 5 } + +logCircuitPoleSensorMinValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This object does not apply to sensors without numerical reading." + ::= { circuitPoleSensorLogEntry 6 } + +logCircuitPoleSensorSignedAvgValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { circuitPoleSensorLogEntry 7 } + +logCircuitPoleSensorSignedMaxValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { circuitPoleSensorLogEntry 8 } + +logCircuitPoleSensorSignedMinValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum sensor reading for the log period as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This object does not apply to sensors without numerical reading." + ::= { circuitPoleSensorLogEntry 9 } + +-- unitSensorMeasurementsTable: unit-level sensor readings + +unitSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF UnitSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of unit sensor entries." + ::= { measurementsUnit 3 } + +unitSensorMeasurementsEntry OBJECT-TYPE + SYNTAX UnitSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for an unit sensor." + INDEX { pduId, sensorType } + ::= { unitSensorMeasurementsTable 1 } + +UnitSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsUnitSensorIsAvailable TruthValue, + measurementsUnitSensorState SensorStateEnumeration, + measurementsUnitSensorValue Unsigned32, + measurementsUnitSensorTimeStamp Unsigned32, + measurementsUnitSensorSignedValue Integer32 + } + +measurementsUnitSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { unitSensorMeasurementsEntry 2 } + +measurementsUnitSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { unitSensorMeasurementsEntry 3 } + +measurementsUnitSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as an unsigned integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorMeasurementsEntry 4 } + +measurementsUnitSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp." + ::= { unitSensorMeasurementsEntry 5 } + +measurementsUnitSensorSignedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + unitSensorDecimalDigits. For example, if the value is 1 and + unitSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { unitSensorMeasurementsEntry 6 } + +-- inletSensorMeasurementsTable: inlet sensor readings + +inletSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF InletSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of inlet sensor entries." + ::= { measurementsInlet 3 } + +inletSensorMeasurementsEntry OBJECT-TYPE + SYNTAX InletSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for an inlet sensor." + INDEX { pduId, inletId, sensorType } + ::= { inletSensorMeasurementsTable 1 } + +InletSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsInletSensorIsAvailable TruthValue, + measurementsInletSensorState SensorStateEnumeration, + measurementsInletSensorValue Unsigned32, + measurementsInletSensorTimeStamp Unsigned32, + measurementsInletSensorSignedValue Integer32 + } + +measurementsInletSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { inletSensorMeasurementsEntry 2 } + + +measurementsInletSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { inletSensorMeasurementsEntry 3 } + +measurementsInletSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorMeasurementsEntry 4 } + +measurementsInletSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp." + ::= { inletSensorMeasurementsEntry 5 } + +measurementsInletSensorSignedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletSensorMeasurementsEntry 6 } + +-- inletPoleSensorMeasurementsTable: inlet pole sensor readings + +inletPoleSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF InletPoleSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of inlet pole sensor entries." + ::= { measurementsInlet 4 } + +inletPoleSensorMeasurementsEntry OBJECT-TYPE + SYNTAX InletPoleSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for an inlet pole sensor." + INDEX { pduId, inletId, inletPoleIndex, sensorType } + ::= { inletPoleSensorMeasurementsTable 1 } + +InletPoleSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsInletPoleSensorIsAvailable TruthValue, + measurementsInletPoleSensorState SensorStateEnumeration, + measurementsInletPoleSensorValue Unsigned32, + measurementsInletPoleSensorTimeStamp Unsigned32, + measurementsInletPoleSensorSignedValue Integer32 + } + +measurementsInletPoleSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { inletPoleSensorMeasurementsEntry 2 } + +measurementsInletPoleSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { inletPoleSensorMeasurementsEntry 3 } + +measurementsInletPoleSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as an unsigned integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorMeasurementsEntry 4 } + +measurementsInletPoleSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp." + ::= { inletPoleSensorMeasurementsEntry 5 } + +measurementsInletPoleSensorSignedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + inletPoleSensorDecimalDigits. For example, if the value is 1 and + inletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { inletPoleSensorMeasurementsEntry 6 } + +-- outletSensorMeasurementsTable: outlet sensor readings + +outletSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of outlet sensor entries." + ::= { measurementsOutlet 3 } + +outletSensorMeasurementsEntry OBJECT-TYPE + SYNTAX OutletSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for an outlet sensor." + INDEX { pduId, outletId, sensorType } + ::= { outletSensorMeasurementsTable 1 } + +OutletSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsOutletSensorIsAvailable TruthValue, + measurementsOutletSensorState SensorStateEnumeration, + measurementsOutletSensorValue Unsigned32, + measurementsOutletSensorTimeStamp Unsigned32, + measurementsOutletSensorSignedValue Integer32 + } + +measurementsOutletSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { outletSensorMeasurementsEntry 2 } + +measurementsOutletSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { outletSensorMeasurementsEntry 3 } + +measurementsOutletSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as an unsigned integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorMeasurementsEntry 4 } + +measurementsOutletSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp." + ::= { outletSensorMeasurementsEntry 5 } + +measurementsOutletSensorSignedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + outletSensorDecimalDigits. For example, if the value is 1 and + outletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletSensorMeasurementsEntry 6 } + +-- outletPoleSensorMeasurementsTable: outlet pole sensor readings + +outletPoleSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletPoleSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of outlet pole sensor entries." + ::= { measurementsOutlet 4 } + +outletPoleSensorMeasurementsEntry OBJECT-TYPE + SYNTAX OutletPoleSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for an outlet pole sensor." + INDEX { pduId, outletId, outletPoleIndex, sensorType } + ::= { outletPoleSensorMeasurementsTable 1 } + +OutletPoleSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsOutletPoleSensorIsAvailable TruthValue, + measurementsOutletPoleSensorState SensorStateEnumeration, + measurementsOutletPoleSensorValue Unsigned32, + measurementsOutletPoleSensorTimeStamp Unsigned32, + measurementsOutletPoleSensorSignedValue Integer32 + } + +measurementsOutletPoleSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { outletPoleSensorMeasurementsEntry 2 } + +measurementsOutletPoleSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { outletPoleSensorMeasurementsEntry 3 } + +measurementsOutletPoleSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as an unsigned integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorMeasurementsEntry 4 } + +measurementsOutletPoleSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp." + ::= { outletPoleSensorMeasurementsEntry 5 } + +measurementsOutletPoleSensorSignedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + outletPoleSensorDecimalDigits. For example, if the value is 1 and + outletPoleSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { outletPoleSensorMeasurementsEntry 6 } + +-- overCurrentProtectorSensorMeasurementsTable: overcurrent protector sensor readings + +overCurrentProtectorSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF OverCurrentProtectorSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of overcurrent protector sensor entries." + ::= { measurementsOverCurrentProtector 3 } + +overCurrentProtectorSensorMeasurementsEntry OBJECT-TYPE + SYNTAX OverCurrentProtectorSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for an overcurrent protector sensor." + INDEX { pduId, overCurrentProtectorIndex, sensorType } + ::= { overCurrentProtectorSensorMeasurementsTable 1 } + +OverCurrentProtectorSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsOverCurrentProtectorSensorIsAvailable TruthValue, + measurementsOverCurrentProtectorSensorState SensorStateEnumeration, + measurementsOverCurrentProtectorSensorValue Unsigned32, + measurementsOverCurrentProtectorSensorTimeStamp Unsigned32, + measurementsOverCurrentProtectorSensorSignedValue Integer32 + } + +measurementsOverCurrentProtectorSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { overCurrentProtectorSensorMeasurementsEntry 2 } + +measurementsOverCurrentProtectorSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { overCurrentProtectorSensorMeasurementsEntry 3 } + +measurementsOverCurrentProtectorSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as an unsigned integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorMeasurementsEntry 4 } + +measurementsOverCurrentProtectorSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp." + ::= { overCurrentProtectorSensorMeasurementsEntry 5 } + +measurementsOverCurrentProtectorSensorSignedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + overCurrentProtectorSensorDecimalDigits. For example, if the value is 1 and + overCurrentProtectorSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { overCurrentProtectorSensorMeasurementsEntry 6 } + +-- externalSensorMeasurementsTable: external sensor readings + +externalSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExternalSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of external sensor entries. The number of + entries is given by the value of externalSensorCount + for the PDU." + ::= { measurementsExternalSensor 3 } + +externalSensorMeasurementsEntry OBJECT-TYPE + SYNTAX ExternalSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for an external sensor." + INDEX { pduId, sensorID } + ::= { externalSensorMeasurementsTable 1 } + +ExternalSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsExternalSensorIsAvailable TruthValue, + measurementsExternalSensorState SensorStateEnumeration, + measurementsExternalSensorValue Integer32, + measurementsExternalSensorTimeStamp Unsigned32 + } + +measurementsExternalSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { externalSensorMeasurementsEntry 2 } + +measurementsExternalSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { externalSensorMeasurementsEntry 3 } + +measurementsExternalSensorValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + externalSensorDecimalDigits. For example, if the value is 1 and + externalSensorDecimalDigits is 2, then actual value is 0.01. + This parameter does not apply to sensors without numerical reading." + ::= { externalSensorMeasurementsEntry 4 } + +measurementsExternalSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading timestamp." + ::= { externalSensorMeasurementsEntry 5 } + +-- wireSensorMeasurementsTable: wire sensor readings + +wireSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WireSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "A list of wire sensor entries. + Note: This feature is no longer used, the table is always empty." + ::= { measurementsWire 3 } + +wireSensorMeasurementsEntry OBJECT-TYPE + SYNTAX WireSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "An entry containing measurement objects for a wire." + INDEX { pduId, wireId, sensorType } + ::= { wireSensorMeasurementsTable 1 } + +WireSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsWireSensorIsAvailable TruthValue, + measurementsWireSensorState SensorStateEnumeration, + measurementsWireSensorValue Unsigned32, + measurementsWireSensorTimeStamp Unsigned32 + } + +measurementsWireSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Is the sensor available?" + ::= { wireSensorMeasurementsEntry 2 } + +measurementsWireSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The sensor state." + ::= { wireSensorMeasurementsEntry 3 } + +measurementsWireSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The sensor value. + The value of this OID variable should be scaled by + wireSensorDecimalDigits. For example, if the value is 1 and + wireSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the value exceeds 4294967295 + This parameter does not apply to sensors without numerical reading." + ::= { wireSensorMeasurementsEntry 4 } + +measurementsWireSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The timestamp." + ::= { wireSensorMeasurementsEntry 5 } + +-- transferSwitchSensorMeasurementsTable: transfer switch sensor readings + +transferSwitchSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF TransferSwitchSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of transfer switch sensor entries." + ::= { measurementsTransferSwitch 3 } + +transferSwitchSensorMeasurementsEntry OBJECT-TYPE + SYNTAX TransferSwitchSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for a transfer switch sensor." + INDEX { pduId, transferSwitchId, sensorType } + ::= { transferSwitchSensorMeasurementsTable 1 } + +TransferSwitchSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsTransferSwitchSensorIsAvailable TruthValue, + measurementsTransferSwitchSensorState SensorStateEnumeration, + measurementsTransferSwitchSensorValue Unsigned32, + measurementsTransferSwitchSensorTimeStamp Unsigned32, + measurementsTransferSwitchSensorSignedValue Integer32 + } + +measurementsTransferSwitchSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { transferSwitchSensorMeasurementsEntry 2 } + +measurementsTransferSwitchSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { transferSwitchSensorMeasurementsEntry 3 } + +measurementsTransferSwitchSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as an unsigned integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorMeasurementsEntry 4 } + +measurementsTransferSwitchSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp." + ::= { transferSwitchSensorMeasurementsEntry 5 } + +measurementsTransferSwitchSensorSignedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + transferSwitchSensorDecimalDigits. For example, if the value is 1 and + transferSwitchSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { transferSwitchSensorMeasurementsEntry 6 } + +-- circuitSensorMeasurementsTable: BCM2/PMC branch circuit sensor readings + +circuitSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CircuitSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of circuit sensor entries." + ::= { measurementsCircuit 3 } + +circuitSensorMeasurementsEntry OBJECT-TYPE + SYNTAX CircuitSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for a circuit sensor." + INDEX { pduId, circuitId, sensorType } + ::= { circuitSensorMeasurementsTable 1 } + +CircuitSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsCircuitSensorIsAvailable TruthValue, + measurementsCircuitSensorState SensorStateEnumeration, + measurementsCircuitSensorValue Unsigned32, + measurementsCircuitSensorTimeStamp Unsigned32, + measurementsCircuitSensorSignedValue Integer32 + } + +measurementsCircuitSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { circuitSensorMeasurementsEntry 2 } + +measurementsCircuitSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { circuitSensorMeasurementsEntry 3 } + +measurementsCircuitSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorMeasurementsEntry 4 } + +measurementsCircuitSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp." + ::= { circuitSensorMeasurementsEntry 5 } + +measurementsCircuitSensorSignedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitSensorMeasurementsEntry 6 } + +-- circuitPoleSensorMeasurementsTable: BCM2/PMC circuit pole sensor readings + +circuitPoleSensorMeasurementsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CircuitPoleSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of panel circuit pole sensor entries." + ::= { measurementsCircuit 4 } + +circuitPoleSensorMeasurementsEntry OBJECT-TYPE + SYNTAX CircuitPoleSensorMeasurementsEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing measurement objects for a circuit pole sensor." + INDEX { pduId, circuitId, circuitPoleId, sensorType } + ::= { circuitPoleSensorMeasurementsTable 1 } + +CircuitPoleSensorMeasurementsEntryStruct ::= SEQUENCE { + measurementsCircuitPoleSensorIsAvailable TruthValue, + measurementsCircuitPoleSensorState SensorStateEnumeration, + measurementsCircuitPoleSensorValue Unsigned32, + measurementsCircuitPoleSensorTimeStamp Unsigned32, + measurementsCircuitPoleSensorSignedValue Integer32 + } + +measurementsCircuitPoleSensorIsAvailable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the sensor available?" + ::= { circuitPoleSensorMeasurementsEntry 2 } + +measurementsCircuitPoleSensorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor state." + ::= { circuitPoleSensorMeasurementsEntry 3 } + +measurementsCircuitPoleSensorValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as an unsigned integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value will wrap around if the scaled sensor reading exceeds + 4294967295. It is undefined for sensors which can have negative + readings. + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorMeasurementsEntry 4 } + +measurementsCircuitPoleSensorTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp." + ::= { circuitPoleSensorMeasurementsEntry 5 } + +measurementsCircuitPoleSensorSignedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sensor reading as a signed integer. + The value of this OID variable should be scaled by + inletSensorDecimalDigits. For example, if the value is 1 and + inletSensorDecimalDigits is 2, then actual value is 0.01. + This value is undefined for sensors whose range exceeds the + Integer32 range (-2147483648 .. 2147483647). + This parameter does not apply to sensors without numerical reading." + ::= { circuitPoleSensorMeasurementsEntry 6 } + +-- outletSwitchControlTable: objects for controlling outlets + +outletSwitchControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletSwitchControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of outlets for a PDU. The number of + entries is given by the value of outletCount." + ::= { outletControl 2 } + +outletSwitchControlEntry OBJECT-TYPE + SYNTAX OutletSwitchControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for implementing switching operations on an outlet." + INDEX { pduId, outletId } + ::= { outletSwitchControlTable 1 } + +OutletSwitchControlEntryStruct ::= SEQUENCE { + switchingOperation OutletSwitchingOperationsEnumeration, + outletSwitchingState SensorStateEnumeration, + outletSwitchingTimeStamp Unsigned32 + } + +switchingOperation OBJECT-TYPE + SYNTAX OutletSwitchingOperationsEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The switching operation: switch on, switch off or power-cycle." + ::= { outletSwitchControlEntry 2 } + +outletSwitchingState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The outlet state at present" + ::= { outletSwitchControlEntry 3 } + +outletSwitchingTimeStamp OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timestamp indicating when the outlet was last switched" + ::= { outletSwitchControlEntry 4 } + +-- transferSwitchControlTable: objects for controlling transfer switches + +transferSwitchControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF TransferSwitchControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of transfer switches for a PDU. The number of + entries is given by the value of transferSwitchCount." + ::= { transferSwitchControl 1 } + +transferSwitchControlEntry OBJECT-TYPE + SYNTAX TransferSwitchControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for implementing switching operations on a transfer switch." + INDEX { pduId, transferSwitchId } + ::= { transferSwitchControlTable 1 } + +TransferSwitchControlEntryStruct ::= SEQUENCE { + transferSwitchActiveInlet Integer32, + transferSwitchTransferToInlet Integer32, + transferSwitchAlarmOverride TruthValue, + transferSwitchLastTransferReason TransferSwitchTransferReasonEnumeration + } + +transferSwitchActiveInlet OBJECT-TYPE + SYNTAX Integer32(1..64) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the currently active inlet." + ::= { transferSwitchControlEntry 1 } + +transferSwitchTransferToInlet OBJECT-TYPE + SYNTAX Integer32(1..64) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the active inlet. If the new inlet is available, it will become + both active and preferred, otherwise an inconsistentValue error will + be returned. + By default the switching operation will fail if the phase difference + between the inlets is too large. In this case the switch can be forced + by writing transferSwitchAlarmOverride as True in the same request. + This variable will always read as 0." + ::= { transferSwitchControlEntry 2 } + +transferSwitchAlarmOverride OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Force transfer even if the phase difference between the inlets is too + large. + This may only be written together with transferSwitchTransferToInlet, + otherwise an inconsistentValue error will be returned. Always reads as + false." + ::= { transferSwitchControlEntry 3 } + +transferSwitchLastTransferReason OBJECT-TYPE + SYNTAX TransferSwitchTransferReasonEnumeration + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The reason for the most recent transfer" + ::= { transferSwitchControlEntry 4 } + +-- actuatorControlTable: objects for controlling peripheral actuators + +actuatorControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF ActuatorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of actuators for a PDU. " + ::= { actuatorControl 2 } + +actuatorControlEntry OBJECT-TYPE + SYNTAX ActuatorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for implementing user-initiated state changes for an actuator." + INDEX { pduId, sensorID } + ::= { actuatorControlTable 1 } + +ActuatorControlEntryStruct ::= SEQUENCE { + actuatorState SensorStateEnumeration + } + +actuatorState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The actuator state. + A get operation retrieves the state of the actuator. + A set operation changes the state of the sensor. + The valid states for set operations are on(7) and off(8). + Attempting to set the state to any other value will generate an error." + ::= { actuatorControlEntry 2 } + +-- rcmSelfTestTable: objects for controlling RCM (residual current) sensors + +rcmSelfTestTable OBJECT-TYPE + SYNTAX SEQUENCE OF RcmSelfTestEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of RCMs." + ::= { rcmControl 2 } + +rcmSelfTestEntry OBJECT-TYPE + SYNTAX RcmSelfTestEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry for initiating the self test of an RCM." + INDEX { pduId, inletId } + ::= { rcmSelfTestTable 1 } + +RcmSelfTestEntryStruct ::= SEQUENCE { + rcmState SensorStateEnumeration + } + +rcmState OBJECT-TYPE + SYNTAX SensorStateEnumeration + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The rcm state. + A Get operation retrieves the state of the RCM State Sensor. + A Set operation changes the state of the sensor. + The only valid state for set operations is selfTest(29). + When rcmState is set to selfTest, self test of the RCM starts. + Attempting to set the state to any other value will generate an error. + If the current state is selfTest, then an attempt to set the value to selfTest + will be ignored." + ::= { rcmSelfTestEntry 2 } + +-- inletSensorControlTable: objects for controlling inlet sensors + +inletSensorControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF InletSensorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of control entries for the inlet sensors of a PDU. The set + of valid indices is defined by the value of inletCount and the + inletDeviceCapabilities entry for the selected inlet." + ::= { inletSensorControl 1 } + +inletSensorControlEntry OBJECT-TYPE + SYNTAX InletSensorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry used for controlling an inlet sensor." + INDEX { pduId, inletId, sensorType } + ::= { inletSensorControlTable 1 } + +InletSensorControlEntryStruct ::= SEQUENCE { + inletSensorResetValue Integer32 + } + +inletSensorResetValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Writing to this variable sets a new value for the addressed sensor. Only + accumulating sensors (e.g. energy counters) can be reset, and currently + the only supported value is 0. Writing any other value returns an error. + This variable will always read as 0." + ::= { inletSensorControlEntry 1 } + +-- outletSensorControlTable: objects for controlling outlet sensors + +outletSensorControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF OutletSensorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of control entries for the outlet sensors of a PDU. The set + of valid indices is defined by the value of outletCount and the + outletDeviceCapabilities entry for the selected outlet." + ::= { outletSensorControl 1 } + +outletSensorControlEntry OBJECT-TYPE + SYNTAX OutletSensorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry used for controlling an outlet sensor." + INDEX { pduId, outletId, sensorType } + ::= { outletSensorControlTable 1 } + +OutletSensorControlEntryStruct ::= SEQUENCE { + outletSensorResetValue Integer32 + } + +outletSensorResetValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Writing to this variable sets a new value for the addressed sensor. Only + accumulating sensors (e.g. energy counters) can be reset, and currently + the only supported value is 0. Writing any other value returns an error. + This variable will always read as 0." + ::= { outletSensorControlEntry 1 } + +-- unitSensorControlTable: objects for controlling unit sensors + +unitSensorControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF UnitSensorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of control entries for the global sensors of a PDU. The set + of valid indices is defined by the value of pduCount and the + pduDeviceCapabilities entry." + ::= { unitSensorControl 1 } + +unitSensorControlEntry OBJECT-TYPE + SYNTAX UnitSensorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry used for controlling an global sensor." + INDEX { pduId, sensorType } + ::= { unitSensorControlTable 1 } + +UnitSensorControlEntryStruct ::= SEQUENCE { + unitSensorResetValue Integer32 + } + +unitSensorResetValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Writing to this variable sets a new value for the addressed sensor. Only + accumulating sensors (e.g. energy counters) can be reset, and currently + the only supported value is 0. Writing any other value returns an error. + This variable will always read as 0. + This object applies only to multi-inlet PDUs." + ::= { unitSensorControlEntry 1 } + +-- circuitSensorControlTable: objects for controlling BCM2/PMC circuit sensors + +circuitSensorControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF CircuitSensorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of control entries for the circuit sensors of a BCM2. The maximum + number of entries is given by the value of panelCircuitPositionCount." + ::= { circuitSensorControl 1 } + +circuitSensorControlEntry OBJECT-TYPE + SYNTAX CircuitSensorControlEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry used for controlling an circuit sensor." + INDEX { pduId, circuitId, sensorType } + ::= { circuitSensorControlTable 1 } + +CircuitSensorControlEntryStruct ::= SEQUENCE { + circuitSensorResetValue Integer32 + } + +circuitSensorResetValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Writing to this variable sets a new value for the addressed sensor. Only + accumulating sensors (e.g. energy counters) can be reset, and currently + the only supported value is 0. Writing any other value returns an error. + This variable will always read as 0." + ::= { circuitSensorControlEntry 1 } + +-- reliabilityData table: PDU reliability data + +reliabilityDataTableSequenceNumber OBJECT-TYPE + SYNTAX Integer32(1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sequence number for updates to the reliability data table" + ::= { reliabilityData 1 } + +reliabilityDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF ReliabilityDataEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of PDU reliability data entries." + ::= { reliabilityData 2 } + +reliabilityDataEntry OBJECT-TYPE + SYNTAX ReliabilityDataEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing reliability data for a particular PDU." + INDEX { reliabilityIndex } + ::= { reliabilityDataTable 1 } + +ReliabilityDataEntryStruct ::= SEQUENCE { + reliabilityIndex Integer32, + reliabilityId DisplayString, + reliabilityDataValue Unsigned32, + reliabilityDataMaxPossible Unsigned32, + reliabilityDataWorstValue Unsigned32, + reliabilityDataThreshold Unsigned32, + reliabilityDataRawUpperBytes Unsigned32, + reliabilityDataRawLowerBytes Unsigned32, + reliabilityDataFlags BITS + } + +reliabilityIndex OBJECT-TYPE + SYNTAX Integer32(1..4096) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index of the entry in the reliability data table." + ::= { reliabilityDataEntry 1 } + +reliabilityId OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Unique ID of the entry. + POH + Power on hours. + + CB.<label>.TRIPCNT + Trip count of circuit breaker with label <label>. + + CTRL.<serial>.<addr>.MASTER.CSUMERRLASTHOUR + Number of checksum errors in slave (controller board) to master (CPU + board) communication in the last hour on controller with serial + number <serial> and bus address <addr>. + + CTRL.<serial>.<addr>.SLAVE.CSUMERRLASTHOUR + Number of checksum errors in master (CPU board) to slave (controller + board) communication in the last hour on controller with serial + number <serial> and bus address <addr>. + + CTRL.<serial>.<addr>.TOUTLASTHOUR + Number of communication timeouts to controller with serial + number <serial> and bus address <addr> in the last hour. + + CTRL.<serial>.<addr>.RLY.<num>.CYCLECNT + Number of cycles the relay <num> on the controller board with serial + number <serial> and bus address <addr> has made. A cycle is an + off->on followed by an on->off event later. The count is increased on + the off->on transition. + + CTRL.<serial>.<addr>.RLY.<num>.FAILLASTHOUR + Number of failed switching operations on relay <num> on the controller + board with serial number <serial> and bus address <addr> in the last + hour. It depends on the specific controller board hardware and what + error conditions are detected." + ::= { reliabilityDataEntry 2 } + +reliabilityDataValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The normalized value" + ::= { reliabilityDataEntry 3 } + +reliabilityDataMaxPossible OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum possible normalized value" + ::= { reliabilityDataEntry 4 } + +reliabilityDataWorstValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The worst normalized value seen so far" + ::= { reliabilityDataEntry 5 } + +reliabilityDataThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The normalized Threshold value " + ::= { reliabilityDataEntry 6 } + +reliabilityDataRawUpperBytes OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The upper 4 bytes of the raw (not normalized) data. + reliabilityDataRawUpperBytes and reliabilityDataRawLowerBytes + should be combined and interpreted as a signed 64-bit value" + ::= { reliabilityDataEntry 7 } + +reliabilityDataRawLowerBytes OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The lower 4 bytes of the raw (not normalized) data. + reliabilityDataRawUpperBytes and reliabilityDataRawLowerBytes + should be combined and interpreted as a signed 64-bit value" + ::= { reliabilityDataEntry 8 } + +reliabilityDataFlags OBJECT-TYPE + SYNTAX BITS { invalidFlag(0), + oldValue(1), + criticalEntry(2) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Flags" + ::= { reliabilityDataEntry 9 } + +-- reliabilityErrorLog: log for reliability data errors + +reliabilityErrorLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF ReliabilityErrorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of PDU reliability error log entries." + ::= { reliabilityErrorLog 2 } + +reliabilityErrorLogEntry OBJECT-TYPE + SYNTAX ReliabilityErrorLogEntryStruct + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing reliability error log data for a particular PDU." + INDEX { reliabilityErrorLogIndex } + ::= { reliabilityErrorLogTable 1 } + +ReliabilityErrorLogEntryStruct ::= SEQUENCE { + reliabilityErrorLogIndex Integer32, + reliabilityErrorLogId DisplayString, + reliabilityErrorLogValue Unsigned32, + reliabilityErrorLogThreshold Unsigned32, + reliabilityErrorLogRawUpperBytes Unsigned32, + reliabilityErrorLogRawLowerBytes Unsigned32, + reliabilityErrorLogPOH Unsigned32, + reliabilityErrorLogTime Unsigned32 + } + +reliabilityErrorLogIndex OBJECT-TYPE + SYNTAX Integer32(1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index of the entry in the reliability error log table." + ::= { reliabilityErrorLogEntry 1 } + +reliabilityErrorLogId OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Unique ID of the entry. + POH + Power on hours. + + CB.<label>.TRIPCNT + Trip count of circuit breaker with label <label>. + + CTRL.<serial>.<addr>.MASTER.CSUMERRLASTHOUR + Number of checksum errors in slave (controller board) to master (CPU + board) communication in the last hour on controller with serial + number <serial> and bus address <addr>. + + CTRL.<serial>.<addr>.SLAVE.CSUMERRLASTHOUR + Number of checksum errors in master (CPU board) to slave (controller + board) communication in the last hour on controller with serial + number <serial> and bus address <addr>. + + CTRL.<serial>.<addr>.TOUTLASTHOUR + Number of communication timeouts to controller with serial + number <serial> and bus address <addr> in the last hour. + + CTRL.<serial>.<addr>.RLY.<num>.CYCLECNT + Number of cycles the relay <num> on the controller board with serial + number <serial> and bus address <addr> has made. A cycle is an + off->on followed by an on->off event later. The count is increased on + the off->on transition. + + CTRL.<serial>.<addr>.RLY.<num>.FAILLASTHOUR + Number of failed switching operations on relay <num> on the controller + board with serial number <serial> and bus address <addr> in the last + hour. It depends on the specific controller board hardware and what + error conditions are detected." + ::= { reliabilityErrorLogEntry 2 } + +reliabilityErrorLogValue OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The normalized value" + ::= { reliabilityErrorLogEntry 3 } + +reliabilityErrorLogThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The normalized threshold value" + ::= { reliabilityErrorLogEntry 6 } + +reliabilityErrorLogRawUpperBytes OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The upper 4 bytes of the raw (not normalized) data. + reliabilityErrorLogRawUpperBytes and reliabilityErrorLogRawLowerBytes + should be combined and interpreted as a signed 64-bit value" + ::= { reliabilityErrorLogEntry 7 } + +reliabilityErrorLogRawLowerBytes OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The lower 4 bytes of the raw (not normalized) data. + reliabilityErrorLogRawUpperBytes and reliabilityErrorLogRawLowerBytes + should be combined and interpreted as a signed 64-bit value" + ::= { reliabilityErrorLogEntry 8 } + +reliabilityErrorLogPOH OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time of occurrence of the event measured from the last + time the PDU was powered on" + ::= { reliabilityErrorLogEntry 9 } + +reliabilityErrorLogTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The UTC time of occurrence of the event" + ::= { reliabilityErrorLogEntry 10 } + +-- Definition of SNMP traps that can be sent by the PDU +-- All traps contain the pxInetIPAddressType and pxInetIPAddress fields. +-- For IPv4, these parameters contain the IP address type and IP address. +-- For IPv6, these parameters are not used. + +systemStarted NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The system has started." + ::= { traps 1 } + +systemReset NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The system was rebooted." + ::= { traps 2 } + +userLogin NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A user logged in." + ::= { traps 3 } + +userLogout NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A user logged out." + ::= { traps 4 } + +userAuthenticationFailure NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A user authentication attempt failed." + ::= { traps 5 } + +userSessionTimeout NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A user session timed out." + ::= { traps 8 } + +userAdded NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + targetUser, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A user account was added to the system." + ::= { traps 11 } + +userModified NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + targetUser, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A user account was modified." + ::= { traps 12 } + +userDeleted NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + targetUser, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A user account was deleted from the system." + ::= { traps 13 } + +roleAdded NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + roleName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A role was added to the system." + ::= { traps 14 } + +roleModified NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + roleName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A role was modified." + ::= { traps 15 } + +roleDeleted NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + roleName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A role was deleted from the system." + ::= { traps 16 } + +deviceUpdateStarted NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + imageVersion, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The device firmware update has started." + ::= { traps 20 } + +deviceUpdateCompleted NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + imageVersion, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The device firmware update has completed." + ::= { traps 21 } + +userBlocked NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A blocked user tried to log in." + ::= { traps 22 } + +powerControl NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + outletLabel, + measurementsOutletSensorState, + switchingOperation, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "An outlet switching operation has been performed. + Note that measurementsOutletSensorState represents the state of the outlet at the time the trap was sent. + This may be different from the final state of the outlet. For instance, + if the outlet is cycled and the outlet cycle delay is 20 seconds, this variable will + indicate OFF although the final state of the outlet will be ON. The final state of the + outlet will be indicated in the outletSensorStateChange trap for the outlet onOff sensor." + ::= { traps 23 } + +userPasswordChanged NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + targetUser, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "User password was changed." + ::= { traps 24 } + +passwordSettingsChanged NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Strong password settings changed." + ::= { traps 28 } + +firmwareValidationFailed NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Validation of an uploaded firmware image failed." + ::= { traps 38 } + +logFileCleared NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The event log has been cleared." + ::= { traps 41 } + +bulkConfigurationSaved NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A bulk configuration file was downloaded from the device." + ::= { traps 53 } + +bulkConfigurationCopied NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A bulk configuration file was copied to the device." + ::= { traps 54 } + +pduSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + typeOfSensor, + measurementsUnitSensorTimeStamp, + measurementsUnitSensorValue, + measurementsUnitSensorState, + measurementsUnitSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS deprecated + DESCRIPTION + "Unit-level sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsUnitSensorValue is undefined for sensors which can + have negative readings, measurementsUnitSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings." + ::= { traps 60 } + +inletSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + inletLabel, + typeOfSensor, + measurementsInletSensorTimeStamp, + measurementsInletSensorValue, + measurementsInletSensorState, + measurementsInletSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Inlet sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsInletSensorValue is undefined for sensors which can + have negative readings, measurementsInletSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings. + + For an rcmState sensor transitioning to the fail state, the value is the residual current + just before the sensor transitioned to the fail state i.e. + if typeOfSensor = rcmState and measurementsInletSensorState = fail, + then measurementsInletSensorValue = the residual current just before the sensor transitioned to the fail state" + ::= { traps 61 } + +inletPoleSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + inletLabel, + inletPoleNumber, + typeOfSensor, + measurementsInletPoleSensorTimeStamp, + measurementsInletPoleSensorValue, + measurementsInletPoleSensorState, + measurementsInletPoleSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Inlet pole sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsInletPoleSensorValue is undefined for sensors which can + have negative readings, measurementsInletPoleSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings." + ::= { traps 62 } + +outletSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + outletLabel, + typeOfSensor, + measurementsOutletSensorTimeStamp, + measurementsOutletSensorValue, + measurementsOutletSensorState, + measurementsOutletSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Outlet sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsOutletSensorValue is undefined for sensors which can + have negative readings, measurementsOutletSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings." + ::= { traps 63 } + +outletPoleSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + outletLabel, + outletPoleNumber, + typeOfSensor, + measurementsOutletPoleSensorTimeStamp, + measurementsOutletPoleSensorValue, + measurementsOutletPoleSensorState, + measurementsOutletPoleSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Outlet pole sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsOutletPoleSensorValue is undefined for sensors which can + have negative readings, measurementsOutletPoleSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings." + ::= { traps 64 } + +overCurrentProtectorSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + overCurrentProtectorLabel, + typeOfSensor, + measurementsOverCurrentProtectorSensorTimeStamp, + measurementsOverCurrentProtectorSensorValue, + measurementsOverCurrentProtectorSensorState, + measurementsOverCurrentProtectorSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber, + suspectedTripCauseLabel } + STATUS current + DESCRIPTION + "Overcurrent protector sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsOverCurrentProtectorSensorValue is undefined for sensors which can + have negative readings, measurementsOverCurrentProtectorSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings. + For trip sensor state changes, if a particular outlet is determined to be likely + to have caused the OCP trip, its label is passed in suspectedTripCauseLabel." + ::= { traps 65 } + +externalSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + externalSensorNumber, + typeOfSensor, + measurementsExternalSensorTimeStamp, + measurementsExternalSensorValue, + measurementsExternalSensorState , + oldSensorState, + externalSensorSerialNumber, + externalOnOffSensorSubtype, + externalSensorChannelNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "External sensor state change." + ::= { traps 66 } + +smtpMessageTransmissionFailure NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + smtpMessageRecipients, + smtpServer, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "SMTP message transmission failure" + ::= { traps 67 } + +ldapError NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + errorDescription, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "An LDAP error occurred; errorDescription describes the error" + ::= { traps 68 } + +deviceUpdateFailed NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + imageVersion, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The device firmware update has failed." + ::= { traps 70 } + +loadSheddingModeEntered NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The PDU has entered load shedding mode" + ::= { traps 71 } + +loadSheddingModeExited NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The PDU has exited load shedding mode" + ::= { traps 72 } + +pingServerEnabled NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + serverIPAddress, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The ping feature has been enabled for a server." + ::= { traps 73 } + +pingServerDisabled NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + serverIPAddress, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The ping feature has been disabled for a server." + ::= { traps 74 } + +serverNotReachable NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + serverIPAddress, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A monitored server has become unreachable." + ::= { traps 75 } + +serverReachable NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + serverIPAddress, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A monitored server has become reachable." + ::= { traps 76 } + +rfCodeTagConnected NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS deprecated + DESCRIPTION + "An RF-Code tag has been connected." + ::= { traps 77 } + +rfCodeTagDisconnected NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS deprecated + DESCRIPTION + "An RF-Code tag has been disconnected." + ::= { traps 78 } + +deviceIdentificationChanged NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + userName, + deviceChangedParameter, + changedParameterNewValue, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A device identification parameter has been changed." + ::= { traps 79 } + +usbSlaveConnected NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Connectivity to downstream slave has been established. + It applies to the following interfaces: + USB + Ethernet + This trap is sent only if deviceCascadeType is portForwarding" + ::= { traps 80 } + +usbSlaveDisconnected NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Connectivity to downstream slave has been lost + It applies to the following interfaces: + USB + Ethernet + This trap is sent only if deviceCascadeType is portForwarding" + ::= { traps 81 } + +lhxSupportChanged NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + lhxSupportEnabled, + pduSerialNumber } + STATUS current + DESCRIPTION + "Schroff LHX support has been enabled or disabled." + ::= { traps 82 } + +userAcceptedRestrictedServiceAgreement NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A user accepted the Restricted Service Agreement." + ::= { traps 83 } + +userDeclinedRestrictedServiceAgreement NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A user declined the Restricted Service Agreement." + ::= { traps 84 } + +wireSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + wireLabel, + typeOfSensor, + measurementsWireSensorTimeStamp, + measurementsWireSensorValue, + measurementsWireSensorState, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS deprecated + DESCRIPTION + "Wire sensor state change." + ::= { traps 85 } + +transferSwitchSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + transferSwitchLabel, + typeOfSensor, + measurementsTransferSwitchSensorTimeStamp, + measurementsTransferSwitchSensorValue, + measurementsTransferSwitchSensorState, + measurementsTransferSwitchSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + transferSwitchLastTransferReason, + pduSerialNumber } + STATUS current + DESCRIPTION + "Transfer switch sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsTransferSwitchSensorValue is undefined for sensors which can + have negative readings, measurementsTransferSwitchSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings." + ::= { traps 86 } + +deviceSettingsSaved NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A configuration backup has been downloaded from the device." + ::= { traps 88 } + +deviceSettingsRestored NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxIPAddress, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A configuration backup has been restored to the device." + ::= { traps 89 } + +webcamInserted NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + webcamModel, + webcamConnectionPort, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A webcam has been connected." + ::= { traps 90 } + +webcamRemoved NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + webcamModel, + webcamConnectionPort, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A webcam has been disconnected." + ::= { traps 91 } + +inletEnabled NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + inletLabel, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "PDU operation has been enabled for an inlet" + ::= { traps 92 } + +inletDisabled NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + inletLabel, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "PDU operation has been disabled for an inlet" + ::= { traps 93 } + +serverConnectivityUnrecoverable NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + serverIPAddress, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The connection to a monitored server could not be recovered." + ::= { traps 94 } + +radiusError NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + errorDescription, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A Radius error occurred; errorDescription describes the error" + ::= { traps 95 } + +serverReachabilityError NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + serverIPAddress, + errorDescription, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Server reachability error occurred; errorDescription describes the error. + This trap is sent when the Error state is entered. + Reasons for transitioning to the Error state include the following: + Unable to resolve the server hostname." + ::= { traps 96 } + +inletSensorReset NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + inletLabel, + typeOfSensor, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "An inlet sensor was reset." + ::= { traps 97 } + +outletSensorReset NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + outletLabel, + typeOfSensor, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "An outlet sensor was reset." + ::= { traps 98 } + +unknownPeripheralDeviceAttached NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + peripheralDeviceRomcode, + peripheralDevicePackagePosition, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "An unsupported peripheral device was attached." + ::= { traps 99 } + +peripheralDeviceFirmwareUpdate NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + peripheralDevicePackageSerialNumber, + peripheralDeviceFirmwareUpdateState, + peripheralDevicePackageFirmwareVersion, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "The firmware update state of a peripheral device changed while + performing update to peripheralDevicePackageFirmwareVersion." + ::= { traps 100 } + +unitSensorReset NOTIFICATION-TYPE + OBJECTS { pduName, + userName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + typeOfSensor, + sysContact, + sysName, + sysLocation, + pduSerialNumber} + STATUS current + DESCRIPTION + "A unit-level sensor was reset." + ::= { traps 101 } + +unitSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + typeOfSensor, + measurementsUnitSensorTimeStamp, + measurementsUnitSensorValue, + measurementsUnitSensorState, + measurementsUnitSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Unit-level sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsUnitSensorValue is undefined for sensors which can + have negative readings, measurementsUnitSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings." + ::= { traps 102 } + +circuitSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + circuitNumber, + typeOfSensor, + measurementsCircuitSensorTimeStamp, + measurementsCircuitSensorValue, + measurementsCircuitSensorState, + measurementsCircuitSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "BCM2/PMC branch circuit sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsCircuitSensorValue is undefined for sensors which can + have negative readings, measurementsCircuitSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings." + ::= { traps 103 } + +circuitPoleSensorStateChange NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + circuitNumber, + circuitPoleNumber, + typeOfSensor, + measurementsCircuitPoleSensorTimeStamp, + measurementsCircuitPoleSensorValue, + measurementsCircuitPoleSensorState, + measurementsCircuitPoleSensorSignedValue, + oldSensorState, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "BCM2/PMC circuit pole sensor state change. + Which value field to use depends on the metadata of the sensor. + measurementsCircuitPoleSensorValue is undefined for sensors which can + have negative readings, measurementsCircuitPoleSensorSignedValue is + undefined for sensors whose range exceeds the Integer32 range. + Both fields do not apply to sensors without numerical readings." + ::= { traps 104 } + +circuitAdded NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + circuitNumber, + circuitName, + circuitType, + circuitRatedCurrent, + circuitCTRating, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A new branch circuit has been configured" + ::= { traps 105 } + +circuitDeleted NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + circuitNumber, + circuitName, + circuitType, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A configured branch circuit has been deleted" + ::= { traps 106 } + +circuitModified NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + circuitNumber, + circuitName, + circuitType, + circuitRatedCurrent, + circuitCTRating, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A configured branch circuit has been modified" + ::= { traps 107 } + +circuitSensorReset NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + circuitNumber, + typeOfSensor, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "An BCM2/PMC branch circuit sensor was reset." + ::= { traps 108 } + +powerMeterAdded NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + powerMeterPhaseCTRating, + powerMeterNeutralCTRating, + powerMeterEarthCTRating, + powerMeterPanelPositions, + powerMeterPanelLayout, + powerMeterPanelNumbering, + powerMeterType, + inletRatedCurrent, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A new power meter or panel has been configured" + ::= { traps 109 } + +powerMeterDeleted NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + powerMeterType, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A configured power meter has been deleted" + ::= { traps 110 } + +powerMeterModified NOTIFICATION-TYPE + OBJECTS { pduName, + pduNumber, + userName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + powerMeterPhaseCTRating, + powerMeterNeutralCTRating, + powerMeterEarthCTRating, + powerMeterType, + inletRatedCurrent, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A configured power meter has been modified" + ::= { traps 111 } + +smsMessageTransmissionFailure NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + phoneNumber, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "Sending an SMS message failed." + ::= { traps 112 } + +smartCardInserted NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + smartCardReaderId, + smartCardTimestamp, + smartCardType, + smartCardId, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A smartcard was inserted into a card reader." + ::= { traps 113 } + +smartCardRemoved NOTIFICATION-TYPE + OBJECTS { pduName, + pxInetAddressType, + pxInetIPAddress, + agentInetPortNumber, + smartCardReaderId, + smartCardTimestamp, + smartCardType, + smartCardId, + sysContact, + sysName, + sysLocation, + pduSerialNumber } + STATUS current + DESCRIPTION + "A smartcard was removed from a card reader." + ::= { traps 114 } + +END diff --git a/MIBS/raritan/RemoteKVMDevice-MIB b/MIBS/raritan/RemoteKVMDevice-MIB new file mode 100644 index 0000000..f0e4abb --- /dev/null +++ b/MIBS/raritan/RemoteKVMDevice-MIB @@ -0,0 +1,1601 @@ +-- This is a common MIB for Dominion KX/KSX G1, KX/KSX G2, KX G3, LX, and SX G2 + +-- 10/13/2016 G. W +-- Support get of: +-- Port status for all ports +-- System vitals: Memory, CPU, Power +-- Adjust MAX-ACCESS of notification only objects. +-- Maintenance. + +-- 07/12/2016 Y. Z +-- notifications updated +-- Added notification: dsamUpdateStarted +-- Added notification: dsamUpdateCompleted +-- Added notification: dsamConnected +-- Added notification: dsamDisconnected + +-- 11/5/2014 G. W +-- notifications updated +-- Added notification: automaticScriptConfiguration +-- Added variable: fileName +-- SMIv2 OBJECT-TYPE (updated from SMIv1 RFC-1212) + + +-- 12/20/11 H. G +-- notifications updated +-- Added new traps for userDisconnectedFromPort + +-- 07/08/11 H. G +-- Corrected description for portStatusChange + +-- 12/20/10 H. G +-- notifications updated +-- Added new traps for scanStarted, scanStopped +-- Also added defn for portList + +-- 03/09/10 H. G +-- notifications updated +-- Added new traps for securityBannerChanged, securityBannerAction +-- Also added defn for bannerChanges, bannerAction + +-- 09/08/09 H. G +-- notifications updated +-- Added new traps for setDateTime, setFIPSMode +-- Also added defn for sysDateAndTime, fipsModeStatus + +-- 10/14/08 H. G +-- notifications updated +-- Added new traps for userForcedLogout, userUploadedCertificate +-- and bladeChassisCommError +-- Also added defn for certificateAuthorityName + +-- 03/05/2008 H. G +-- notifications updated +-- provide additional support of notifications +-- containing both IPv4 and IPv6 addresses + +-- Authors: P. N and S. O + +-- 01/15/2007 S. O +-- restructured KX2.0 MIB to pass level 6 validation +-- Import section is revised +-- Module Identity section is revised +-- Conformance information is added towards the end +-- Renamed some ASN variables i.e. objectName -> rcpObjectName etc. +-- Added 2 new traps for ipConflictDetected and ipConflictResolved +-- Also added defn for count, new trap variable + + +RemoteKVMDevice-MIB DEFINITIONS ::= BEGIN + IMPORTS + MODULE-IDENTITY, NOTIFICATION-TYPE, + OBJECT-TYPE, -- GW for SMIv2 compliance and consistency + enterprises, Integer32, Gauge32 + FROM SNMPv2-SMI + + DisplayString, DateAndTime, TruthValue + FROM SNMPv2-TC + + MODULE-COMPLIANCE, + NOTIFICATION-GROUP, + OBJECT-GROUP + FROM SNMPv2-CONF; + +-- Raritan is registered with IANA for an enterprise MIB + +raritan MODULE-IDENTITY + LAST-UPDATED "201610131200Z" + ORGANIZATION "Raritan Inc." + CONTACT-INFO + " Technical Support + Raritan Inc. + 400 Cottontail Lane + Somerset, New Jersey, 08873 + E-mail: support@raritan.com" + DESCRIPTION + "The MIB module representing Raritan Computers' + implementation of enterprise specific MIBs + for KX products." + + REVISION "201610131200Z" + DESCRIPTION + "Version updated for added get" + + REVISION "201411061200Z" + DESCRIPTION + "Version updated for added support for SX G2" + + REVISION "201311011200Z" + DESCRIPTION + "Version updated for added support for KX G3" + + REVISION "201112201200Z" + DESCRIPTION + "Version updated for product release 2.5.0. Add support for Disconnect User - Force User Off" + + REVISION "201107081200Z" + DESCRIPTION + "Version updated for product release 2.4.5." + + ::= { enterprises 13742 } + +remoteKVMDevice OBJECT IDENTIFIER ::= { raritan 3 } + +-- GW same location as TRAPS (implied remoteKVMDevice#) so that it is compatible with the previous MIB. +remoteKVMDeviceNotifications OBJECT IDENTIFIER ::= { remoteKVMDevice 0 } +remoteKVMDeviceGet OBJECT IDENTIFIER ::= { remoteKVMDevice 1 } + +--****************************************************************************** +-- Data objects +--****************************************************************************** + +rcpObjectName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The model type of the device" + ::= { remoteKVMDevice 2 } + +rcpObjectInstance OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The device name" + ::= { remoteKVMDevice 3} + +userName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "User Name" + ::= { remoteKVMDevice 4} + +targetUser OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The user record being operated on" + ::= { remoteKVMDevice 5} + +groupName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The group record being operated on" + ::= { remoteKVMDevice 6} + +rcpIPAddress OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The IP address" + ::= { remoteKVMDevice 7} + +deviceName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Device name" + ::= { remoteKVMDevice 8 } + +portStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Port status and availability: +inactive - Target cannot be detected. (UI Status:down, Availability:idle) +available - Target can be accessed. (UI Status:up, Availability:idle) +connected - A user is connected but capacity is available. (UI Status:up/down, Availability:connected) +busy - Reached maximum access capacity. (UI Status:up/down, Availability:busy)" + ::= { remoteKVMDevice 9 } + +portName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Port Name" + ::= { remoteKVMDevice 10 } + +clusterID OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The cluster ID of the CommandCenter managing this device" + ::= { remoteKVMDevice 11 } + +ipPort OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The IP Port" + ::= { remoteKVMDevice 12 } + +resetType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "How the device reset was performed" + ::= { remoteKVMDevice 13 } + +interface OBJECT-TYPE + SYNTAX INTEGER { lan(1), modem(2) } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Interface type" + ::= { remoteKVMDevice 14} + +ethernetInterface OBJECT-TYPE + SYNTAX INTEGER { lan0(0), lan1(1)} + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Ethernet Interface" + ::= { remoteKVMDevice 15 } + +backupRestoreAction OBJECT-TYPE + SYNTAX INTEGER { backup(0), restore(1) } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Backup Restore Action." + ::= { remoteKVMDevice 16 } + +imageType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Image type to update." + ::= { remoteKVMDevice 17 } + + +imageVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The version of the Upgrade image" + ::= { remoteKVMDevice 18 } + +status OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The success status of an operation" + ::= { remoteKVMDevice 19 } + +fileVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The file version" + ::= { remoteKVMDevice 20 } + +fileType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The file type" + ::= { remoteKVMDevice 21 } + +outletName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Name of the power outlet." + ::= { remoteKVMDevice 22 } + + +portNumber OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Port number" + ::= { remoteKVMDevice 23} + +serialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Serial Number of the Device or CIM" + ::= { remoteKVMDevice 24} + +cimName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Name of the cim." + ::= { remoteKVMDevice 25 } + +count OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "A generic counter" + ::= { remoteKVMDevice 26} + +restoredLanPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Lan port restored after the failure" + ::= { remoteKVMDevice 27 } + +remoteIpAddress OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The IP address of a client" + ::= { remoteKVMDevice 28} + +oldIpAddress OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The IP address" + ::= { remoteKVMDevice 29} + +newIpAddress OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The IP address" + ::= { remoteKVMDevice 30} + +newNetmask OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The net mask " + ::= { remoteKVMDevice 31} + +oldNetmask OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The net mask" + ::= { remoteKVMDevice 32} + +oldGateway OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The Gateway ip" + ::= { remoteKVMDevice 33} + +newGateway OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The Gateway ip" + ::= { remoteKVMDevice 34} + + +-- KSX G2 specific var Names sxAlertString, pduName + +sxAlertString OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + " Serial Alert string on a port. " + ::= { remoteKVMDevice 38 } + +pduName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + " Name of the connected PDU " + ::= { remoteKVMDevice 39 } + +changeEventText OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A configurable parameter was changed. The +description text identifies the object changed and its new value. The format +of the text is 'IPv 4 Parameter : parameter = new value, . IPv6 Parameter : +parameter = new value, ..." + ::= { remoteKVMDevice 40 } + +certificateAuthorityName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Certificate Authority Name" + ::= { remoteKVMDevice 41 } + +sysDateAndTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The system date and time." + ::= { remoteKVMDevice 42 } + +fipsModeStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "FIPS Mode status (0-Disabled, 1-Enabled)" + ::= { remoteKVMDevice 43 } + +bannerChanges OBJECT-TYPE + SYNTAX INTEGER {enabled(0), disabled(1), modified(2)} + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "KX2 Banner Changes " + ::= { remoteKVMDevice 44 } + +bannerAction OBJECT-TYPE + SYNTAX INTEGER {declined(0), accepted(1)} + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "User Acceptance / Rejection of Initial Banner Consent" + ::= { remoteKVMDevice 45 } + +portList OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..1024)) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Port List" + ::= { remoteKVMDevice 46 } + +fileName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Name of the file used in the operation" + ::= { remoteKVMDevice 47 } + +--****************************************************************************** +-- Available for retrieval (SNMP Get) +-- Only supported on SX2. +--****************************************************************************** + +systemUsageMemory OBJECT-TYPE + SYNTAX Gauge32 (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Percent current memory usage" + ::= { remoteKVMDeviceGet 1 } + +systemUsageCPU OBJECT-TYPE + SYNTAX Gauge32 (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Percent processor usage" + ::= { remoteKVMDeviceGet 2 } + +systemPowerSupplyTable OBJECT-TYPE + SYNTAX SEQUENCE OF SystemPowerSupplyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Status of all power supplies" + ::= { remoteKVMDeviceGet 3 } + +systemPowerSupplyEntry OBJECT-TYPE + SYNTAX SystemPowerSupplyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Power supply data" + INDEX { systemPowerSupplyNumber } + ::= { systemPowerSupplyTable 1 } + +SystemPowerSupplyEntry ::= SEQUENCE { + systemPowerSupplyNumber Integer32, + systemPowerSupplyPowerOn TruthValue +} + +systemPowerSupplyNumber OBJECT-TYPE + SYNTAX Integer32 (1..2) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "System power supply identifier" + ::= { systemPowerSupplyEntry 1 } + +systemPowerSupplyPowerOn OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the system power supply on (true)" + ::= { systemPowerSupplyEntry 2 } + +portDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF PortDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Retrieve data for all ports" + ::= { remoteKVMDeviceGet 4 } + +portDataEntry OBJECT-TYPE + SYNTAX PortDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Port identification and current information" + INDEX { portDataIndex } + ::= { portDataTable 1 } + +PortDataEntry ::= SEQUENCE { + portDataIndex Integer32, + portDataNumber Integer32, + portDataName DisplayString, + portDataType DisplayString, + portDataStatus INTEGER +} + +portDataIndex OBJECT-TYPE + SYNTAX Integer32 (1..1024) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "table index" + ::= { portDataEntry 1 } + +portDataNumber OBJECT-TYPE + SYNTAX Integer32 (1..1024) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Physical port number" + ::= { portDataEntry 2 } + +portDataName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User assigned port name" + ::= { portDataEntry 3 } + +portDataType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port connection type" + ::= { portDataEntry 4 } + +portDataStatus OBJECT-TYPE + SYNTAX INTEGER { inactive(1), available(2), connected(3), busy(4) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port status and availability: +inactive - Target cannot be detected. (UI Status:down, Availability:idle) +available - Target can be accessed. (UI Status:up, Availability:idle) +connected - A user is connected but capacity is available. (UI Status:up/down, Availability:connected) +busy - Reached maximum access capacity. (UI Status:up/down, Availability:busy)" + ::= { portDataEntry 5 } + +--****************************************************************************** +-- Traps +--****************************************************************************** + +rebootStarted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName + } + STATUS current + DESCRIPTION + "The reboot process has started" + ::= { remoteKVMDeviceNotifications 1 } + + +rebootCompleted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance + } + STATUS current + DESCRIPTION + "The reboot process is complete" + ::= { remoteKVMDeviceNotifications 2 } + + +userLogin NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user logged in" + ::= { remoteKVMDeviceNotifications 3 } + + +userLogout NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user logged out" + ::= { remoteKVMDeviceNotifications 4 } + + +userAuthenticationFailure NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user authentication attempt failed" + ::= { remoteKVMDeviceNotifications 5 } + + +portConnect NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + portName + } + STATUS current + DESCRIPTION + "A user connected to a port" + ::= { remoteKVMDeviceNotifications 6 } + + +portDisconnect NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + portName + } + STATUS current + DESCRIPTION + "A user disconnected from a port" + ::= { remoteKVMDeviceNotifications 7 } + + +userSessionTimeout NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user timed out from the device" + ::= { remoteKVMDeviceNotifications 8 } + + +userConnectionLost NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user lost connection to the device" + ::= { remoteKVMDeviceNotifications 9 } + + +portStatusChange NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + deviceName, + portName, + portStatus + } + STATUS current + DESCRIPTION + "A port status has changed" + ::= { remoteKVMDeviceNotifications 10 } + +userAdded NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + targetUser + } + STATUS current + DESCRIPTION + "A user was added to the system" + ::= { remoteKVMDeviceNotifications 11 } + +userModified NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + targetUser + } + STATUS current + DESCRIPTION + "A user account was modified" + ::= { remoteKVMDeviceNotifications 12 } + +userDeleted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + targetUser + } + STATUS current + DESCRIPTION + "A user was deleted from the system" + ::= { remoteKVMDeviceNotifications 13 } + +groupAdded NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + groupName + } + STATUS current + DESCRIPTION + "A group was added to the system" + ::= { remoteKVMDeviceNotifications 14 } + + +groupModified NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + groupName + } + STATUS current + DESCRIPTION + "A group was modified" + ::= { remoteKVMDeviceNotifications 15 } + + +groupDeleted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + groupName + } + STATUS current + DESCRIPTION + "A group was deleted from the system" + ::= { remoteKVMDeviceNotifications 16 } + +startCCManagement NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "The device was put under CommandCenter management" + ::= { remoteKVMDeviceNotifications 17 } + +stopCCManagement NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "The device was removed from CommandCenter management" + ::= { remoteKVMDeviceNotifications 18 } + +factoryReset NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "The device was reset to factory default setting" + ::= { remoteKVMDeviceNotifications 19 } + +deviceUpdateStarted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress, + imageVersion + } + STATUS current + DESCRIPTION + "The device update has started" + ::= { remoteKVMDeviceNotifications 20 } + +deviceUpdateCompleted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress, + imageVersion, + status + } + STATUS current + DESCRIPTION + "The device update is complete" + ::= { remoteKVMDeviceNotifications 21 } + +configBackup NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress, + fileType, + fileVersion, + status + } + STATUS current + DESCRIPTION + "The device configuration has been backed up" + ::= { remoteKVMDeviceNotifications 22 } + +configRestore NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress, + fileType, + fileVersion, + status + } + STATUS current + DESCRIPTION + "The device configuration has been restored" + ::= { remoteKVMDeviceNotifications 23 } + +userPasswordChanged NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + targetUser, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user password was changed" + ::= { remoteKVMDeviceNotifications 24 } + +powerNotification NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + outletName, + status + } + STATUS current + DESCRIPTION + "The power outlet status (1-Active or 0-Inactive) notification " + ::= { remoteKVMDeviceNotifications 25 } + +networkFailure NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + ethernetInterface + } + STATUS current + DESCRIPTION + "A network failure was detected on an ethernet port" + ::= { remoteKVMDeviceNotifications 26 } + +-- Start new events defined exclusively for KX2 + + +networkParameterChanged NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + remoteIpAddress, + oldIpAddress, + newIpAddress, + oldNetmask, + newNetmask, + newGateway, + oldGateway + } + STATUS current + DESCRIPTION + "A network parameter change was detected" + ::= { remoteKVMDeviceNotifications 27 } + +vmImageConnected NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A Virtual Media Connected" + ::= { remoteKVMDeviceNotifications 28 } + + +vmImageDisconnected NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A Virtual Media disconnected" + ::= { remoteKVMDeviceNotifications 29 } + + +cimUpdateStarted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance + } + STATUS current + DESCRIPTION + "CIM update started" + ::= { remoteKVMDeviceNotifications 30 } + + +cimUpdateCompleted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance + } + STATUS current + DESCRIPTION + "CIM update completed" + ::= { remoteKVMDeviceNotifications 31 } + + +cimConnected NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + cimName, + serialNumber, + portNumber + } + STATUS current + DESCRIPTION + "CIM Connected" + ::= { remoteKVMDeviceNotifications 32 } + + +cimDisconnected NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + cimName, + serialNumber, + portNumber + } + STATUS current + DESCRIPTION + "CIM Disconnected" + ::= { remoteKVMDeviceNotifications 33 } + +powerOutletNotification NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + outletName, + status + } + STATUS current + DESCRIPTION + "Powerstip-device outlet status Notification" + ::= { remoteKVMDeviceNotifications 34 } + + +-- Start new event to support RP products + +portConnectionDenied NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + portName + } + STATUS current + DESCRIPTION + "A connection to the target port is denied" + ::= { remoteKVMDeviceNotifications 35 } + +-- Firmware file discarded + + +firmwareFileDiscarded NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName + } + STATUS current + DESCRIPTION + "A firmaware file discarded " + ::= { remoteKVMDeviceNotifications 36 } + +firmwareUpdateFailed NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName + } + STATUS current + DESCRIPTION + "A firmware update failed " + ::= { remoteKVMDeviceNotifications 37 } + +firmwareValidationFailed NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName + } + STATUS current + DESCRIPTION + "A firmware validation failed " + ::= { remoteKVMDeviceNotifications 38 } + +securityViolation NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "Security violation." + ::= { remoteKVMDeviceNotifications 39 } + +deviceUpdateFailed NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName + } + STATUS current + DESCRIPTION + "Device update has failed." + ::= { remoteKVMDeviceNotifications 40 } + +passwordSettingsChanged NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + status + } + STATUS current + DESCRIPTION + " Strong password settings changed " + ::= { remoteKVMDeviceNotifications 41 } + +-- Network Failover Trap + +ethernetFailover NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + restoredLanPort + } + STATUS current + DESCRIPTION + "A ethernet failover was detected and restored on new ethernet interface" + ::= { remoteKVMDeviceNotifications 42 } + +-- New traps for KX 1.4.5 Sujata Osowski 01/15/2007 + +ipConflictDetected NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + rcpIPAddress, + count + } + STATUS current + DESCRIPTION + "IP address conflict is detected." + ::= { remoteKVMDeviceNotifications 43 } + +ipConflictResolved NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + rcpIPAddress + } + STATUS current + DESCRIPTION + "IP address conflict is resolved." + ::= { remoteKVMDeviceNotifications 44 } + +sxPortAlert NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + portNumber, + sxAlertString + } + STATUS current + DESCRIPTION + "Port keyword detected." + ::= { remoteKVMDeviceNotifications 45 } + +pduConnected NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + portNumber, + pduName + } + STATUS current + DESCRIPTION + " A PDU is connected to the device directly through power port" + ::= { remoteKVMDeviceNotifications 46 } + +pduDisconnected NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + portNumber, + pduName + } + STATUS current + DESCRIPTION + " A PDU is disconnected from a power port" + ::= { remoteKVMDeviceNotifications 47 } + +networkParameterChangedv2 NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + remoteIpAddress, + changeEventText + } + STATUS current + DESCRIPTION "A network parameter change was detected" + ::= { remoteKVMDeviceNotifications 48 } + +portConnectv2 NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + portName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user connected to a port" + ::= { remoteKVMDeviceNotifications 49 } + + +portDisconnectv2 NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + portName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user disconnected from a port" + ::= { remoteKVMDeviceNotifications 50 } + +userForcedLogout NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user was forcibly logged out by Admin" + ::= { remoteKVMDeviceNotifications 51 } + +userUploadedCertificate NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress, + certificateAuthorityName + } + STATUS current + DESCRIPTION + "A user uploaded a SSL Certificate." + ::= { remoteKVMDeviceNotifications 52 } + +bladeChassisCommError NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + deviceName, + portNumber, + portName + } + STATUS current + DESCRIPTION + "A communications error with blade chassis device connected to this port was detected." + ::= { remoteKVMDeviceNotifications 53 } + +setDateTime NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + deviceName, + sysDateAndTime + } + STATUS current + DESCRIPTION + "The device time and date have been set." + ::= { remoteKVMDeviceNotifications 54 } + +setFIPSMode NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + deviceName, + fipsModeStatus + } + STATUS current + DESCRIPTION + "FIPS Mode status has been changed on the device." + ::= { remoteKVMDeviceNotifications 55 } + +securityBannerChanged NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress, + bannerChanges + } + STATUS current + DESCRIPTION + "Security Banner has changed " + ::= { remoteKVMDeviceNotifications 56 } + +securityBannerAction NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + rcpIPAddress, + bannerAction + } + STATUS current + DESCRIPTION + "User Acceptance/Rejection of Security Banner " + ::= { remoteKVMDeviceNotifications 57 } + +scanStarted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + portList, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user started a port scan" + ::= { remoteKVMDeviceNotifications 58 } + +scanStopped NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + portList, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user stopped a port scan" + ::= { remoteKVMDeviceNotifications 59 } + +userDisconnectedFromPort NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + targetUser, + portName, + userName, + rcpIPAddress + } + STATUS current + DESCRIPTION + "A user was forcibly disconnected from a port by Admin" + ::= { remoteKVMDeviceNotifications 60 } + +automaticScriptConfiguration NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + rcpIPAddress, + fileName, + status + } + STATUS current + DESCRIPTION + "The system attempted to run a script downloaded via TFTP" + ::= { remoteKVMDeviceNotifications 61 } + + +dsamUpdateStarted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance + } + STATUS current + DESCRIPTION + "DSAM update started" + ::= { remoteKVMDeviceNotifications 62 } + + +dsamUpdateCompleted NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance + } + STATUS current + DESCRIPTION + "DSAM update completed" + ::= { remoteKVMDeviceNotifications 63 } + + +dsamConnected NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + serialNumber + } + STATUS current + DESCRIPTION + "DSAM Connected" + ::= { remoteKVMDeviceNotifications 64 } + + +dsamDisconnected NOTIFICATION-TYPE + OBJECTS { + rcpObjectName, + rcpObjectInstance, + serialNumber + } + STATUS current + DESCRIPTION + "DSAM Disconnected" + ::= { remoteKVMDeviceNotifications 65 } + + +-- * +-- * SNMPv2 Conformance Information ******************************************* +-- * + +raritanMibConformance OBJECT IDENTIFIER ::= { raritan 9 } +raritanMibCompliances OBJECT IDENTIFIER ::= { raritanMibConformance 1 } +raritanMibGroups OBJECT IDENTIFIER ::= { raritanMibConformance 2 } + +raritanMibCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "Compliance statement for the private Raritan MIB." + MODULE -- Module Raritan-MIB + MANDATORY-GROUPS { + raritanMibBasicGroup, + raritanMibTrapGroup, + raritanMibGetGroup + } + ::= { raritanMibCompliances 1 } + +raritanMibBasicGroup OBJECT-GROUP + OBJECTS { + rcpObjectName, + rcpObjectInstance, + userName, + targetUser, + groupName, + rcpIPAddress, + deviceName, + portStatus, + portName, + clusterID, + ipPort, + resetType, + interface, + ethernetInterface, + backupRestoreAction, + imageType, + imageVersion, + status, + fileVersion, + fileType, + outletName, + portNumber, + serialNumber, + cimName, + count, + restoredLanPort, + remoteIpAddress, + oldIpAddress, + newIpAddress, + newNetmask, + oldNetmask, + oldGateway, + newGateway, + sxAlertString, + pduName, + changeEventText, + certificateAuthorityName, + sysDateAndTime, + fipsModeStatus, + bannerChanges, + bannerAction, + portList, + fileName + } + STATUS current + DESCRIPTION "Objects used in the traps." + ::= { raritanMibGroups 1 } + + +raritanMibTrapGroup NOTIFICATION-GROUP + NOTIFICATIONS { + rebootStarted, + rebootCompleted, + userLogin, + userLogout, + userAuthenticationFailure, + portConnect, + portDisconnect, + userSessionTimeout, + userConnectionLost, + portStatusChange, + userAdded, + userModified, + userDeleted, + groupAdded, + groupModified, + groupDeleted, + startCCManagement, + stopCCManagement, + factoryReset, + deviceUpdateStarted, + deviceUpdateCompleted, + configBackup, + configRestore, + userPasswordChanged, + powerNotification, + networkFailure, + networkParameterChanged, + vmImageConnected, + vmImageDisconnected, + cimUpdateStarted, + cimUpdateCompleted, + cimConnected, + cimDisconnected, + powerOutletNotification, + portConnectionDenied, + firmwareFileDiscarded, + firmwareUpdateFailed, + firmwareValidationFailed, + securityViolation, + deviceUpdateFailed, + passwordSettingsChanged, + ethernetFailover, + ipConflictDetected, + ipConflictResolved, + sxPortAlert, + pduConnected, + pduDisconnected, + networkParameterChangedv2, + portConnectv2, + portDisconnectv2, + userForcedLogout, + userUploadedCertificate, + bladeChassisCommError, + setDateTime, + setFIPSMode, + securityBannerChanged, + securityBannerAction, + scanStarted, + scanStopped, + userDisconnectedFromPort, + automaticScriptConfiguration, + dsamUpdateStarted, + dsamUpdateCompleted, + dsamConnected, + dsamDisconnected + } + STATUS current + DESCRIPTION "Raritan traps." + ::= { raritanMibGroups 2 } + +raritanMibGetGroup OBJECT-GROUP + OBJECTS { + systemUsageMemory, + systemUsageCPU, + systemPowerSupplyPowerOn, + portDataNumber, + portDataName, + portDataType, + portDataStatus + } + STATUS current + DESCRIPTION "Raritan retrievable objects" + ::= { raritanMibGroups 3 } + +END |