diff options
Diffstat (limited to 'MIBS/raisecom/ROSMGMT-OSPFv2-MIB')
| -rw-r--r-- | MIBS/raisecom/ROSMGMT-OSPFv2-MIB | 4683 |
1 files changed, 4683 insertions, 0 deletions
diff --git a/MIBS/raisecom/ROSMGMT-OSPFv2-MIB b/MIBS/raisecom/ROSMGMT-OSPFv2-MIB new file mode 100644 index 0000000..ba7be5c --- /dev/null +++ b/MIBS/raisecom/ROSMGMT-OSPFv2-MIB @@ -0,0 +1,4683 @@ +-- *****************************************************************
+-- ROSMGMT-OSPFv2-MIB.mib
+--
+-- May 2010, zhangyan
+--
+-- Copyright(c) 2020 by RAISECOM TECH, Ltd.
+-- All rights reserved.
+--
+-- *****************************************************************
+
+--MibName=rosMgmtOspf
+ROSMGMT-OSPFV2-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,Counter32, Gauge32,
+ Integer32, Unsigned32, IpAddress
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, TruthValue, RowStatus
+ FROM SNMPv2-TC
+ EnableVar FROM SWITCH-TC
+ InterfaceIndexOrZero
+ FROM IF-MIB
+ rosMgmt
+ FROM RAISECOM-BASE-MIB;
+
+ rosMgmtOspf MODULE-IDENTITY
+ LAST-UPDATED "202005070000Z" -- May 07, 2020
+ ORGANIZATION "Raisecom Technology CO.,Ltd."
+ CONTACT-INFO
+ " Raise Systems
+ Postal: Beijing, China
+ Tel: 86-010-82884499
+ E-mail: support@raisecom.com"
+
+ DESCRIPTION "This MIB module defines objects to Ospf."
+
+ REVISION "202005070000Z" -- May 07, 2020
+ DESCRIPTION "Initial MIB creation."
+
+ ::= { rosMgmt 47}
+
+ProcessID ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-0"
+ STATUS current
+ DESCRIPTION
+ "The OSPF process id."
+ SYNTAX Unsigned32
+
+AreaID ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "1d.1d.1d.1d"
+ STATUS current
+ DESCRIPTION
+ "An OSPF Area Identifier.
+ Note that the Area ID, in OSPF, has the same format
+ as an IP address, but has the function of defining
+ a summarization point for link state advertisements."
+ SYNTAX IpAddress
+
+RouterID ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "1d.1d.1d.1d"
+ STATUS current
+ DESCRIPTION
+ "A OSPF Router Identifier.
+ Note that the Router ID, in OSPF, has the same format
+ as an IP address, but identifies the router independent
+ of its IP address."
+ SYNTAX IpAddress
+
+Metric ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-0"
+ STATUS current
+ DESCRIPTION
+ "The OSPF internal metric.
+ Note that the OSPF metric is defined as an unsigned value
+ in the range."
+ SYNTAX Integer32 (0..'FFFF'h)
+
+BigMetric ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-0"
+ STATUS current
+ DESCRIPTION
+ "The OSPF external metric."
+ SYNTAX Integer32 (0..'FFFFFF'h)
+
+Status ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "An indication of the operability of an OSPF
+ function or feature. For example, the status
+ of an interface: 'enabled' indicates that
+ it is willing to communicate with other OSPF routers,
+ and 'disabled' indicates that it is not."
+ SYNTAX INTEGER { enabled (1), disabled (2) }
+
+PositiveInteger ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-0"
+ STATUS current
+ DESCRIPTION
+ "A positive integer. Values in excess are precluded as
+ unnecessary and prone to interoperability issues."
+ SYNTAX Integer32 (0..'7FFFFFFF'h)
+
+HelloRange ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-0"
+ STATUS current
+ DESCRIPTION
+ "The range of intervals in seconds on which Hello messages
+ are exchanged."
+ SYNTAX Integer32 (1..'FFFF'h)
+
+UpToMaxAge ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-0"
+ STATUS current
+
+ DESCRIPTION
+ "The values in seconds that one might find or configure
+ for variables bounded by the maximum age of an LSA."
+ SYNTAX Integer32 (0..3600)
+
+DesignatedRouterPriority ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d-0"
+ STATUS current
+ DESCRIPTION
+ "The range of values defined for the priority of a system
+ for becoming the designated router."
+ SYNTAX Integer32 (0..'FF'h)
+
+OspfAuthenticationType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The authentication type."
+ SYNTAX INTEGER {
+ none (0),
+ simplePassword (1),
+ md5 (2)
+ -- reserved for specification by IANA (> 2)
+ }
+
+
+-- Define groups in ROSMGMT-OSPFv2-MIB
+ rosMgmtOspfNotifications OBJECT IDENTIFIER ::= { rosMgmtOspf 1 }
+ rosMgmtOspfObjects OBJECT IDENTIFIER ::= { rosMgmtOspf 2 }
+ rosMgmtOspfConformance OBJECT IDENTIFIER ::= { rosMgmtOspf 3 }
+
+-- rosMgmtOspfNotifications
+--
+-- This group defines the traps related to Ospf.
+
+--
+-- Define groups in rosMgmtOspfNotifications
+--
+-- rosMgmtOspfTrapControl OBJECT IDENTIFIER ::= { rosMgmtOspfNotifications 1 }
+
+
+--
+-- rosMgmtOspfTrapControl
+--
+-- This Table defines the control infomation of Ospf Traps.
+--
+ rosMgmtOspfTrapControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfTrapControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table enable or disable ospf traps"
+ ::= { rosMgmtOspfNotifications 1 }
+
+ rosMgmtOspfTrapControlEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfTrapControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the rosMgmtOspfTrapControl.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ INDEX { rosMgmtOspfProcessId }
+ ::= { rosMgmtOspfTrapControlTable 1 }
+
+ RosMgmtOspfTrapControlEntry ::=
+ SEQUENCE {
+ rosMgmtOspfSetTrap
+ EnableVar,
+ rosMgmtOspfConfigErrorType
+ INTEGER,
+ rosMgmtOspfPacketType
+ INTEGER,
+ rosMgmtOspfPacketSrc
+ IpAddress
+ }
+
+ rosMgmtOspfSetTrap OBJECT-TYPE
+ SYNTAX EnableVar
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Whether the Device shoule send traps."
+ DEFVAL {disable}
+ ::= { rosMgmtOspfTrapControlEntry 1 }
+
+
+ rosMgmtOspfConfigErrorType OBJECT-TYPE
+ SYNTAX INTEGER {
+ badVersion (1),
+ areaMismatch (2),
+ unknownNbmaNbr (3), -- Router is Dr eligible
+ unknownVirtualNbr (4),
+ authTypeMismatch(5),
+ authFailure (6),
+ netMaskMismatch (7),
+ helloIntervalMismatch (8),
+ deadIntervalMismatch (9),
+ optionMismatch (10) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Potential types of configuration conflicts.
+ Used by the ospfConfigError and ospfConfigVir-
+ tError traps."
+ ::= { rosMgmtOspfTrapControlEntry 2 }
+
+
+ rosMgmtOspfPacketType OBJECT-TYPE
+ SYNTAX INTEGER {
+ hello (1),
+ dbDescript (2),
+ lsReq (3),
+ lsUpdate (4),
+ lsAck (5) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "OSPF packet types."
+ ::= { rosMgmtOspfTrapControlEntry 3 }
+
+
+ rosMgmtOspfPacketSrc OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of an inbound packet that can-
+ not be identified by a neighbor instance."
+ ::= { rosMgmtOspfTrapControlEntry 4 }
+
+
+--
+-- rosMgmtOspfTraps
+--
+-- This Table defines the Ospf Traps.
+--
+-- Define groups in rosMgmtOspfNotifications
+--
+ rosMgmtOspfTraps OBJECT IDENTIFIER ::= { rosMgmtOspfNotifications 0 }
+
+ rosMgmtOspfIfStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfIfIpAddress,
+ rosMgmtOspfAddressLessIf,
+ rosMgmtOspfIfState -- The new state
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfIfStateChange trap signifies that there
+ has been a change in the state of a non-virtual
+ OSPF interface. This trap should be generated
+ when the interface state regresses (e.g., goes
+ from Dr to Down) or progresses to a terminal
+ state (i.e., Point-to-Point, DR Other, Dr, or
+ Backup)."
+ ::= { rosMgmtOspfTraps 1 }
+
+
+ rosMgmtOspfVirtIfStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfVirtIfAreaId,
+ rosMgmtOspfVirtIfNeighbor,
+ rosMgmtOspfVirtIfState -- The new state
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfIfStateChange trap signifies that there
+ has been a change in the state of an OSPF vir-
+ tual interface.
+ This trap should be generated when the inter-
+ face state regresses (e.g., goes from Point-
+ to-Point to Down) or progresses to a terminal
+ state (i.e., Point-to-Point)."
+ ::= { rosMgmtOspfTraps 2 }
+
+ rosMgmtOspfNbrStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfNbrIpAddr,
+ rosMgmtOspfNbrAddressLessIndex,
+ rosMgmtOspfNbrRtrId,
+ rosMgmtOspfNbrState -- The new state
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfNbrStateChange trap signifies that
+ there has been a change in the state of a non-
+ virtual OSPF neighbor. This trap should be
+ generated when the neighbor state regresses
+ (e.g., goes from Attempt or Full to 1-Way or
+ Down) or progresses to a terminal state (e.g.,
+ 2-Way or Full). When an neighbor transitions
+ from or to Full on non-broadcast multi-access
+ and broadcast networks, the trap should be gen-
+ erated by the designated router. A designated
+ router transitioning to Down will be noted by
+ rosMgmtOspfIfStateChange."
+ ::= { rosMgmtOspfTraps 3 }
+
+ rosMgmtOspfVirtNbrStateChange NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfVirtNbrArea,
+ rosMgmtOspfVirtNbrRtrId,
+ rosMgmtOspfVirtNbrState -- The new state
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfIfStateChange trap signifies that there
+ has been a change in the state of an OSPF vir-
+ tual neighbor. This trap should be generated
+ when the neighbor state regresses (e.g., goes
+ from Attempt or Full to 1-Way or Down) or
+ progresses to a terminal state (e.g., Full)."
+ ::= { rosMgmtOspfTraps 4 }
+
+ rosMgmtOspfIfConfigError NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfIfIpAddress,
+ rosMgmtOspfAddressLessIf,
+ rosMgmtOspfPacketSrc, -- The source IP address
+ rosMgmtOspfConfigErrorType, -- Type of error
+ rosMgmtOspfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfIfConfigError trap signifies that a
+ packet has been received on a non-virtual in-
+ terface from a router whose configuration
+ parameters conflict with this router's confi-
+ guration parameters. Note that the event op-
+ tionMismatch should cause a trap only if it
+ prevents an adjacency from forming."
+ ::= { rosMgmtOspfTraps 5 }
+
+ rosMgmtOspfVirtIfConfigError NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfVirtIfAreaId,
+ rosMgmtOspfVirtIfNeighbor,
+ rosMgmtOspfConfigErrorType, -- Type of error
+ rosMgmtOspfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfConfigError trap signifies that a pack-
+ et has been received on a virtual interface
+ from a router whose configuration parameters
+ conflict with this router's configuration
+ parameters. Note that the event optionMismatch
+ should cause a trap only if it prevents an ad-
+ jacency from forming."
+ ::= { rosMgmtOspfTraps 6 }
+
+
+ rosMgmtOspfIfAuthFailure NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfIfIpAddress,
+ rosMgmtOspfAddressLessIf,
+ rosMgmtOspfPacketSrc, -- The source IP address
+ rosMgmtOspfConfigErrorType, -- authTypeMismatch or
+ -- authFailure
+ rosMgmtOspfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfIfAuthFailure trap signifies that a
+ packet has been received on a non-virtual in-
+ terface from a router whose authentication key
+ or authentication type conflicts with this
+ router's authentication key or authentication
+ type."
+ ::= { rosMgmtOspfTraps 7 }
+
+
+ rosMgmtOspfVirtIfAuthFailure NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfVirtIfAreaId,
+ rosMgmtOspfVirtIfNeighbor,
+ rosMgmtOspfConfigErrorType, -- authTypeMismatch or
+ -- authFailure
+ rosMgmtOspfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfVirtIfAuthFailure trap signifies that a
+ packet has been received on a virtual interface
+ from a router whose authentication key or au-
+ thentication type conflicts with this router's
+ authentication key or authentication type."
+ ::= { rosMgmtOspfTraps 8 }
+
+ rosMgmtOspfIfRxBadPacket NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfIfIpAddress,
+ rosMgmtOspfAddressLessIf,
+ rosMgmtOspfPacketSrc, -- The source IP address
+ rosMgmtOspfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfIfRxBadPacket trap signifies that an
+ OSPF packet has been received on a non-virtual
+ interface that cannot be parsed."
+ ::= { rosMgmtOspfTraps 9 }
+
+ rosMgmtOspfVirtIfRxBadPacket NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfVirtIfAreaId,
+ rosMgmtOspfVirtIfNeighbor,
+ rosMgmtOspfPacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfRxBadPacket trap signifies that an OSPF
+ packet has been received on a virtual interface
+ that cannot be parsed."
+ ::= { rosMgmtOspfTraps 10 }
+
+
+ rosMgmtOspfTxRetransmit NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfIfIpAddress,
+ rosMgmtOspfAddressLessIf,
+ rosMgmtOspfNbrRtrId, -- Destination
+ rosMgmtOspfPacketType,
+ rosMgmtOspfLsdbType,
+ rosMgmtOspfLsdbLsId,
+ rosMgmtOspfLsdbRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfTxRetransmit trap signifies than an
+ OSPF packet has been retransmitted on a non-
+ virtual interface. All packets that may be re-
+ transmitted are associated with an LSDB entry.
+ The LS type, LS ID, and Router ID are used to
+ identify the LSDB entry."
+ ::= { rosMgmtOspfTraps 11 }
+
+
+ rosMgmtOspfVirtIfTxRetransmit NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfVirtIfAreaId,
+ rosMgmtOspfVirtIfNeighbor,
+ rosMgmtOspfPacketType,
+ rosMgmtOspfLsdbType,
+ rosMgmtOspfLsdbLsId,
+ rosMgmtOspfLsdbRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfTxRetransmit trap signifies than an
+ OSPF packet has been retransmitted on a virtual
+ interface. All packets that may be retransmit-
+ ted are associated with an LSDB entry. The LS
+ type, LS ID, and Router ID are used to identify
+ the LSDB entry."
+ ::= { rosMgmtOspfTraps 12 }
+
+ rosMgmtOspfOriginateLsa NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfLsdbAreaId, -- 0.0.0.0 for AS Externals
+ rosMgmtOspfLsdbType,
+ rosMgmtOspfLsdbLsId,
+ rosMgmtOspfLsdbRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfOriginateLsa trap signifies that a new
+ LSA has been originated by this router. This
+ trap should not be invoked for simple refreshes
+ of LSAs (which happesn every 30 minutes), but
+ instead will only be invoked when an LSA is
+ (re)originated due to a topology change. Addi-
+ tionally, this trap does not include LSAs that
+ are being flushed because they have reached
+ MaxAge."
+ ::= { rosMgmtOspfTraps 13 }
+
+ rosMgmtOspfMaxAgeLsa NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfLsdbAreaId, -- 0.0.0.0 for AS Externals
+ rosMgmtOspfLsdbType,
+ rosMgmtOspfLsdbLsId,
+ rosMgmtOspfLsdbRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfMaxAgeLsa trap signifies that one of
+ the LSA in the router's link-state database has
+ aged to MaxAge."
+ ::= { rosMgmtOspfTraps 14 }
+
+ rosMgmtOspfLsdbOverflow NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfExtLsdbLimit
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfLsdbOverflow trap signifies that the
+ number of LSAs in the router's link-state data-
+ base has exceeded rosMgmtOspfExtLsdbLimit."
+ ::= { rosMgmtOspfTraps 15 }
+
+
+ rosMgmtOspfLsdbApproachingOverflow NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfExtLsdbLimit
+ }
+ STATUS current
+ DESCRIPTION
+ "An rosMgmtOspfLsdbApproachingOverflow trap signifies
+ that the number of LSAs in the router's link-
+ state database has exceeded ninety percent of
+ rosMgmtOspfExtLsdbLimit."
+ ::= { rosMgmtOspfTraps 16 }
+
+ rosMgmtOspfIfKeyValid NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfIfIpAddress,
+ rosMgmtOspfAddressLessIf,
+ rosMgmtOspfIfAuthKeyChain
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap will notify the network manager that some key
+ associated with an interface recovers valid."
+ ::= { rosMgmtOspfTraps 17 }
+
+
+ rosMgmtOspfIfLastKeyExpiration NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfIfIpAddress,
+ rosMgmtOspfAddressLessIf,
+ rosMgmtOspfIfAuthKeyChain
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap will notify the network manager that the last
+ key associated with an interface expires."
+ ::= { rosMgmtOspfTraps 18 }
+
+ rosMgmtOspfVirtIfKeyValid NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfVirtIfAreaId,
+ rosMgmtOspfVirtIfNeighbor,
+ rosMgmtOspfVirtIfAuthKeyChain
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap will notify the network manager that some key
+ associated with an virtual link recovers valid."
+ ::= { rosMgmtOspfTraps 19 }
+
+
+ rosMgmtOspfVirtIfLastKeyExpiration NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRouterId, -- The originator of the trap
+ rosMgmtOspfVirtIfAreaId,
+ rosMgmtOspfVirtIfNeighbor,
+ rosMgmtOspfVirtIfAuthKeyChain
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap will notify the network manager that the last
+ key associated with an virtual link expires."
+ ::= { rosMgmtOspfTraps 20 }
+
+ rosMgmtOspfRedistributeOverflow NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRedistributeProtocol, -- The originator of the trap
+ rosMgmtOspfRedistributeProcessId,
+ rosMgmtOspfRedistributeRouteLimit
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap should be generated when the number of
+ redistribute routes exceeds limit."
+ ::= { rosMgmtOspfTraps 21 }
+
+ rosMgmtOspfRedistributeNotOverflow NOTIFICATION-TYPE
+ OBJECTS {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfRedistributeProtocol, -- The originator of the trap
+ rosMgmtOspfRedistributeProcessId,
+ rosMgmtOspfRedistributeRouteLimit
+ }
+ STATUS current
+ DESCRIPTION
+ "This trap should be generated when the number of
+ redistribute routes drop to limit."
+ ::= { rosMgmtOspfTraps 22 }
+
+--
+-- rosMgmtOspfObjects
+--
+-- This group defines all the objects related to Ospf.
+
+-- Define groups in rosMgmtOspfObjects
+-- rosMgmtOspfGlobalTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 1 }
+-- rosMgmtOspfAreaTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 2 }
+-- rosMgmtOspfNetWorkTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 3 }
+-- rosMgmtOspfStubAreaTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 4 }
+-- rosMgmtOspfNssaAreaTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 5 }
+-- rosMgmtOspfIfTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 6 }
+-- rosMgmtOspfVirtIfTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 7 }
+-- rosMgmtOspfNbrTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 8 }
+-- rosMgmtOspfNbmaCfgNbrTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 9 }
+-- rosMgmtOspfVirtNbrTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 10}
+-- rosMgmtOspfAreaAggregateTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 11}
+-- rosMgmtOspfExternalAggregateTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 12}
+-- rosMgmtOspfLsdbTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 13}
+-- rosMgmtOspfAsLsdbTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 14}
+-- rosMgmtOspfAreaLsaCountTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 15}
+-- rosMgmtOspfRedistributeTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 16}
+-- rosMgmtOspfDefaultInfoTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 17}
+-- rosMgmtOspfPacketIoStatisTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 18}
+-- rosMgmtOspfRouteTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 19}
+-- rosMgmtOspfBdrRouteTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 20}
+-- rosMgmtOspfDistributeListGroup OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 21}
+-- rosMgmtOspfDNBitOperationTable OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 22}
+--
+--
+-- rosMgmtOspfGlobalTable
+--
+-- This Table defines the Global Vars.
+--
+ rosMgmtOspfGlobalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfGlobalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "OSPF global Vars for every ospf process."
+ ::= { rosMgmtOspfObjects 1 }
+
+ rosMgmtOspfGlobalEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfGlobalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "OSPF global Vars for every ospf process."
+ INDEX { rosMgmtOspfProcessId }
+ ::= { rosMgmtOspfGlobalTable 1 }
+
+ RosMgmtOspfGlobalEntry ::=
+ SEQUENCE {
+ rosMgmtOspfProcessId
+ ProcessID,
+ rosMgmtOspfRouterId
+ RouterID,
+ rosMgmtOspfAdminStat
+ EnableVar,
+ rosMgmtOspfVersionNumber
+ INTEGER,
+ rosMgmtOspfAreaBdrRtrStatus
+ TruthValue,
+ rosMgmtOspfASBdrRtrStatus
+ TruthValue,
+ rosMgmtOspfExternLsaCount
+ Gauge32,
+ rosMgmtOspfExternLsaCksumSum
+ Integer32,
+ rosMgmtOspfOriginateNewLsas
+ Counter32,
+ rosMgmtOspfRxNewLsas
+ Counter32,
+ rosMgmtOspfExtLsdbLimit
+ Integer32,
+ rosMgmtOspfExitOverflowInterval
+ PositiveInteger,
+ rosMgmtOspfReferenceBandwidth
+ Unsigned32,
+ rosMgmtOspfAsLsaCount
+ Gauge32,
+ rosMgmtOspfAsLsaCksumSum
+ Unsigned32,
+ rosMgmtOspfStubRouterSupport
+ TruthValue,
+ rosMgmtOspfStubRouterAdvertisement
+ INTEGER,
+ rosMgmtOspfAdminDistance
+ Integer32,
+ rosMgmtOspfSpfInterval
+ Integer32,
+ rosMgmtOspfReset
+ INTEGER,
+ rosMgmtOspfExportMetric
+ Integer32,
+ rosMgmtOspfExportTag
+ Integer32,
+ rosMgmtOspfExportType
+ INTEGER,
+ rosMgmtOspfNetCounts
+ Integer32,
+ rosMgmtOspfAreaCounts
+ Integer32,
+ rosMgmtOspfNssaAreaCounts
+ Integer32,
+ rosMgmtOspfSpfCounts
+ Integer32,
+ rosMgmtOspfGlobalStatus
+ RowStatus,
+ rosMgmtOspfRedistributeRouteLimit
+ Integer32,
+ rosMgmtOspfDistanceIntra
+ Integer32,
+ rosMgmtOspfDistanceInter
+ Integer32,
+ rosMgmtOspfDistanceExtern
+ Integer32,
+ rosMgmtOspfRfc1583Compatible
+ TruthValue,
+ rosMgmtOspfSpfHode
+ Integer32,
+ rosMgmtOspfBfdAllItfs
+ TruthValue,
+ rosMgmtOspfOpaqueCapability
+ TruthValue,
+ rosMgmtOspfTECapability
+ TruthValue,
+ rosMgmtOspfTEAreaID
+ IpAddress,
+ rosMgmtOspfTERouterId
+ RouterID,
+ rosMgmtOspfGRCapability
+ INTEGER,
+ rosMgmtOspfGRPeriod
+ Integer32,
+ rosMgmtOspfGRHelper
+ INTEGER,
+ rosMgmtOspfGRHelperMaxPeriod
+ Integer32,
+ rosMgmtOspfMaximumLoadBalancing
+ Integer32,
+ rosMgmtOspfMaxMetric
+ Integer32,
+ rosMgmtOspfMaxMetricType
+ Integer32,
+ rosMgmtOspfMaxMetricTime
+ Integer32,
+ rosMgmtOspfMaxMetricTypeStartup
+ Integer32,
+ rosMgmtOspfLsdbOverflowLimit
+ Integer32,
+ rosMgmtOspfTrafficAdjustType
+ INTEGER,
+ rosMgmtOspfRouteTagValue
+ Unsigned32,
+ rosMgmtOspfRouteTagCheckDisable
+ TruthValue,
+ rosMgmtOspfDNBitSetDisableSummary
+ TruthValue,
+ rosMgmtOspfDNBitSetDisableAse
+ TruthValue,
+ rosMgmtOspfDNBitSetDisableNssa
+ TruthValue,
+ rosMgmtOspfDNBitCheckDisableSummary
+ TruthValue,
+ rosMgmtOspfDNBitCheckDisableAse
+ TruthValue,
+ rosMgmtOspfDNBitCheckDisableNssa
+ TruthValue,
+ rosMgmtOspfSpfMilliInterval
+ Integer32,
+ rosMgmtOspfSpfMilliHode
+ Integer32,
+ rosMgmtOspfLoopFreeAlt
+ TruthValue
+ }
+
+ rosMgmtOspfProcessId OBJECT-TYPE
+ SYNTAX ProcessID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit unsigned integer uniquely identifying the
+ ospf process."
+ ::= { rosMgmtOspfGlobalEntry 1 }
+
+
+ rosMgmtOspfRouterId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the
+ router in the Autonomous System.
+ By convention, to ensure uniqueness, this
+ should default to the value of one of the
+ router's IP interface addresses.
+
+ This object is persistent and when written
+ the entity SHOULD save the change to non-volatile storage."
+ REFERENCE
+ "OSPF Version 2, C.1 Global parameters"
+ ::= { rosMgmtOspfGlobalEntry 2 }
+
+ rosMgmtOspfAdminStat OBJECT-TYPE
+ SYNTAX EnableVar
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The administrative status of OSPF in the
+ router. The value 'enabled' denotes that the
+ OSPF Process is active on at least one interface;
+ 'disabled' disables it on all interfaces.
+
+ This object is persistent and when written
+ the entity SHOULD save the change to non-volatile storage."
+ DEFVAL { disable }
+ ::= { rosMgmtOspfGlobalEntry 3 }
+
+ rosMgmtOspfVersionNumber OBJECT-TYPE
+ SYNTAX INTEGER { version2 (2) }
+ MAX-ACCESS read-only
+ STATUS current
+
+ DESCRIPTION
+ "The current version number of the OSPF protocol is 2."
+ REFERENCE
+ "OSPF Version 2, Title"
+ ::= { rosMgmtOspfGlobalEntry 4 }
+
+ rosMgmtOspfAreaBdrRtrStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A flag to note whether this router is an Area
+ Border Router."
+ REFERENCE
+ "OSPF Version 2, Section 3 Splitting the AS into
+ Areas"
+ ::= { rosMgmtOspfGlobalEntry 5 }
+
+ rosMgmtOspfASBdrRtrStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A flag to note whether this router is configured as
+ an Autonomous System Border Router.
+
+ This object is persistent and when written the
+ entity SHOULD save the change to non-volatile storage."
+ REFERENCE
+ "OSPF Version 2, Section 3.3 Classification of
+ routers"
+ ::= { rosMgmtOspfGlobalEntry 6 }
+
+ rosMgmtOspfExternLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of external (LS type-5) link state
+ advertisements in the link state database."
+ REFERENCE
+ "OSPF Version 2, Appendix A.4.5 AS external link
+ advertisements"
+ ::= { rosMgmtOspfGlobalEntry 7 }
+
+ rosMgmtOspfExternLsaCksumSum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+
+ STATUS current
+ DESCRIPTION
+ "The 32-bit sum of the LS checksums of
+ the external link state advertisements
+ contained in the link state database. This sum
+ can be used to determine if there has been a
+ change in a router's link state database and
+ to compare the link state database of two
+ routers. The value should be treated as unsigned
+ when comparing two sums of checksums."
+ ::= { rosMgmtOspfGlobalEntry 8 }
+
+ rosMgmtOspfOriginateNewLsas OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of new link state advertisements
+ that have been originated. This number is
+ incremented each time the router originates a new
+ LSA.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management system,
+ and at other times as indicated by the value of
+ ospfDiscontinuityTime."
+ ::= { rosMgmtOspfGlobalEntry 9 }
+
+ rosMgmtOspfRxNewLsas OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+ "The number of link state advertisements received
+ that are determined to be new instantiations.
+ This number does not include newer instantiations
+ of self-originated link state advertisements.
+
+ Discontinuities in the value of this counter can
+ occur at re-initialization of the management system,
+ and at other times as indicated by the value of
+ ospfDiscontinuityTime."
+ ::= { rosMgmtOspfGlobalEntry 10 }
+
+ rosMgmtOspfExtLsdbLimit OBJECT-TYPE
+ SYNTAX Integer32 (-1..'7FFFFFFF'h)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of non-default
+ AS-external LSAs entries that can be stored in the
+ link state database. If the value is -1, then
+ there is no limit.
+
+ When the number of non-default AS-external LSAs
+ in a router's link state database reaches
+ rosMgmtOspfExtLsdbLimit, the router enters
+ overflow state. The router never holds more than
+ rosMgmtOspfExtLsdbLimit non-default AS-external LSAs
+ in its database. rosMgmtOspfExtLsdbLimit MUST be set
+ identically in all routers attached to the OSPF
+ backbone and/or any regular OSPF area (i.e.,
+ OSPF stub areas and NSSAs are excluded).
+
+ This object is persistent and when written
+ the entity SHOULD save the change to non-volatile
+ storage."
+ DEFVAL { -1 }
+ ::= { rosMgmtOspfGlobalEntry 11 }
+
+ rosMgmtOspfExitOverflowInterval OBJECT-TYPE
+ SYNTAX PositiveInteger
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that, after entering
+ OverflowState, a router will attempt to leave
+ OverflowState. This allows the router to again
+ originate non-default AS-external LSAs. When
+ set to 0, the router will not leave
+ overflow state until restarted.
+
+ This object is persistent and when written
+ the entity SHOULD save the change to non-volatile
+ storage."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 12 }
+
+ rosMgmtOspfReferenceBandwidth OBJECT-TYPE
+ SYNTAX Unsigned32(1..4296967)
+ UNITS "millionbits per second"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Reference bandwidth in millionbits/second for
+ calculating default interface metrics. The
+ default value is 100 MBPS.
+
+ This object is persistent and when written
+ the entity SHOULD save the change to non-volatile
+ storage."
+ ::= { rosMgmtOspfGlobalEntry 13 }
+
+ rosMgmtOspfAsLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+
+ DESCRIPTION
+ "The number of AS-scope link state
+ advertisements in the AS-scope link state database."
+ ::= { rosMgmtOspfGlobalEntry 14 }
+
+ rosMgmtOspfAsLsaCksumSum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit unsigned sum of the LS checksums of
+ the AS link state advertisements contained in the AS-scope
+ link state database. This sum can be used to determine
+ if there has been a change in a router's AS-scope link
+ state database, and to compare the AS-scope link state
+ database of two routers."
+ ::= { rosMgmtOspfGlobalEntry 15 }
+
+ rosMgmtOspfStubRouterSupport OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The router's support for stub router functionality."
+ REFERENCE
+ "OSPF Stub Router Advertisement"
+ ::= { rosMgmtOspfGlobalEntry 16 }
+
+ rosMgmtOspfStubRouterAdvertisement OBJECT-TYPE
+ SYNTAX INTEGER {
+ doNotAdvertise (1),
+ advertise(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object controls the advertisement of
+ stub router LSAs by the router. The value
+ doNotAdvertise will result in the advertisement
+ of a standard router LSA and is the default value.
+
+ This object is persistent and when written
+ the entity SHOULD save the change to non-volatile
+ storage."
+ ::= { rosMgmtOspfGlobalEntry 17 }
+
+ rosMgmtOspfAdminDistance OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The administrative distance of ospf process. 0 represents
+ administration distance of ospf is not set."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 18 }
+
+ rosMgmtOspfSpfInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..600)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Delay(s) between receiving a change to SPF calculation."
+ DEFVAL { 2 }
+ ::= { rosMgmtOspfGlobalEntry 19 }
+
+ rosMgmtOspfReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ none (0),
+ general(1),
+ gr(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Reset ospf process by process ID."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 20 }
+
+ rosMgmtOspfExportMetric OBJECT-TYPE
+ SYNTAX Integer32 (0.. 16777215)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The default metric of imporing route into ospf process."
+ DEFVAL { 20 }
+ ::= { rosMgmtOspfGlobalEntry 21 }
+
+ rosMgmtOspfExportTag OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The default tag of importing route into ospf process."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 22 }
+
+ rosMgmtOspfExportType OBJECT-TYPE
+ SYNTAX INTEGER {
+ type1 (1),
+ type2 (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The default type of importing route into ospf process."
+ DEFVAL { type2 }
+ ::= { rosMgmtOspfGlobalEntry 23 }
+
+ rosMgmtOspfNetCounts OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It bas been used to describe the total number of networks in OSPF process."
+ ::= { rosMgmtOspfGlobalEntry 24 }
+
+ rosMgmtOspfAreaCounts OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It bas been used to describe the number of areas in OSPF process."
+ ::= { rosMgmtOspfGlobalEntry 25 }
+
+ rosMgmtOspfNssaAreaCounts OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It bas been used to describe the number of NSSA areas in OSPF process."
+ ::= { rosMgmtOspfGlobalEntry 26 }
+
+ rosMgmtOspfSpfCounts OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It bas been used to describe the total number of SPF calculation in OSPF process. "
+ ::= { rosMgmtOspfGlobalEntry 27 }
+
+ rosMgmtOspfGlobalStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfGlobalEntry 28 }
+
+ rosMgmtOspfRedistributeRouteLimit OBJECT-TYPE
+ SYNTAX Integer32(-1|1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specify the max number in importing route.-1 represents
+ the max number in importing route are not set."
+ ::= { rosMgmtOspfGlobalEntry 29 }
+
+ rosMgmtOspfDistanceIntra OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The administrative distance of ospf Intra-area routes. 0 represents
+ administration distance of ospf Intra-area routes are not set."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 30 }
+
+ rosMgmtOspfDistanceInter OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The administrative distance of ospf Inter-area routes. 0 represents
+ administration distance of ospf Inter-area routes are not set."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 31 }
+
+ rosMgmtOspfDistanceExtern OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The administrative distance of ospf external routes. 0 represents
+ administration distance of ospf external routes are not set."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 32 }
+
+ rosMgmtOspfRfc1583Compatible OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ospf process compatible with RFC 1583."
+ DEFVAL { true }
+ ::= { rosMgmtOspfGlobalEntry 33 }
+
+ rosMgmtOspfSpfHode OBJECT-TYPE
+ SYNTAX Integer32 (1..600)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Hold time (s) between consecutive SPF calculations."
+ DEFVAL { 3 }
+ ::= { rosMgmtOspfGlobalEntry 34 }
+
+ rosMgmtOspfBfdAllItfs OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Ospf process indicate global BFD."
+ DEFVAL { false }
+ ::= { rosMgmtOspfGlobalEntry 35 }
+
+ rosMgmtOspfOpaqueCapability OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Ospf process indicate opaque capability."
+ DEFVAL { false }
+ ::= { rosMgmtOspfGlobalEntry 36 }
+
+ rosMgmtOspfTECapability OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ospf process indicate TE capability."
+ DEFVAL { false }
+ ::= { rosMgmtOspfGlobalEntry 37 }
+
+ rosMgmtOspfTEAreaID OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+
+ STATUS deprecated
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying an area.
+ Area ID 0.0.0.0 is used for the OSPF backbone."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { rosMgmtOspfGlobalEntry 38 }
+
+ rosMgmtOspfTERouterId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the
+ TE router in the area.By convention,
+ to ensure uniqueness,this should default to
+ the value of the router-id of ospf precess."
+ REFERENCE
+ "OSPF Version 2, C.1 Global parameters"
+ ::= { rosMgmtOspfGlobalEntry 39 }
+
+ rosMgmtOspfGRCapability OBJECT-TYPE
+ SYNTAX INTEGER {
+ graceful (1),
+ signaling (2),
+ never(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Use this command to enable OSPF graceful restart
+ or restart signaling. If a router is not restart-enabled,
+ it cannot enter graceful restart mode and act as a helper."
+ ::= { rosMgmtOspfGlobalEntry 40 }
+
+ rosMgmtOspfGRPeriod OBJECT-TYPE
+ SYNTAX Integer32 (1..1800)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ " The grace period for the restarting router."
+ DEFVAL { 120 }
+ ::= { rosMgmtOspfGlobalEntry 41 }
+
+ rosMgmtOspfGRHelper OBJECT-TYPE
+ SYNTAX INTEGER {
+ general (0),
+ never (1),
+ plannedonly (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "the helper behavior for graceful restart."
+ ::= { rosMgmtOspfGlobalEntry 42 }
+
+
+ rosMgmtOspfGRHelperMaxPeriod OBJECT-TYPE
+ SYNTAX Integer32 (1..1800)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Help only if received grace-period is less than this value."
+ DEFVAL { 1800 }
+ ::= { rosMgmtOspfGlobalEntry 43 }
+
+ rosMgmtOspfMaximumLoadBalancing OBJECT-TYPE
+ SYNTAX Integer32 (1..8)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Maximum load-balancing paths for OSPF."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfGlobalEntry 44 }
+
+ rosMgmtOspfMaxMetric OBJECT-TYPE
+ SYNTAX Integer32 (1..2)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The router announces itself as a stub router."
+ DEFVAL { 2 }
+ ::= { rosMgmtOspfGlobalEntry 45 }
+
+ rosMgmtOspfMaxMetricType OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The stub router will change the cost include stub link."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 46 }
+
+
+ rosMgmtOspfMaxMetricTime OBJECT-TYPE
+ SYNTAX Integer32 (0 | 90..86400)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Time, in seconds, router-LSAs are originated with max-metric."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 47 }
+
+ rosMgmtOspfMaxMetricTypeStartup OBJECT-TYPE
+ SYNTAX Integer32 (0..1)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Set maximum metric for stub links in router-LSAs on start up."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 48 }
+
+ rosMgmtOspfLsdbOverflowLimit OBJECT-TYPE
+ SYNTAX Integer32 (0..1000000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Set the OSPF link-state database overflow limit."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 49 }
+
+ rosMgmtOspfTrafficAdjustType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none (0),
+ shortcut (1),
+ fa (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Set the OSPF traffic adjust feature."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 50 }
+
+ rosMgmtOspfRouteTagValue OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Set tag of the import route whcih belongs to the vpn process."
+ ::= { rosMgmtOspfGlobalEntry 51 }
+
+ rosMgmtOspfRouteTagCheckDisable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Block the inclusion of Tag whcih belongs to the vpn process."
+ ::= { rosMgmtOspfGlobalEntry 52 }
+
+
+ rosMgmtOspfDNBitSetDisableSummary OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Configure the DN bit in an Summary LSA. The DN bit is set in an Summary LSA by default."
+ ::= { rosMgmtOspfGlobalEntry 53 }
+
+
+ rosMgmtOspfDNBitSetDisableAse OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Configure the DN bit in an as-external-LSA. The DN bit is set in an as-external-LSA by default."
+ ::= { rosMgmtOspfGlobalEntry 54 }
+
+
+ rosMgmtOspfDNBitSetDisableNssa OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Configure the DN bit in an Nssa LSA. The DN bit is set in an Nssa LSA by default."
+ ::= { rosMgmtOspfGlobalEntry 55 }
+
+ rosMgmtOspfDNBitCheckDisableSummary OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Check the DN bit in an Summary LSA. The DN bit check is enabled in an Summary LSA by default."
+ ::= { rosMgmtOspfGlobalEntry 56 }
+
+ rosMgmtOspfDNBitCheckDisableAse OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Check the DN bit in an an as-external-LSA. The DN bit check is enabled in an an as-external-LSA by default."
+ ::= { rosMgmtOspfGlobalEntry 57 }
+
+
+ rosMgmtOspfDNBitCheckDisableNssa OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Check the DN bit in an Nssa LSA. The DN bit check is enabled in an Nssa LSA by default."
+ ::= { rosMgmtOspfGlobalEntry 58 }
+
+
+ rosMgmtOspfSpfMilliInterval OBJECT-TYPE
+ SYNTAX Integer32 (0..600000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Delay(ms) between receiving a change to SPF calculation."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 59 }
+
+
+ rosMgmtOspfSpfMilliHode OBJECT-TYPE
+ SYNTAX Integer32 (0..600000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Hold time (ms) between consecutive SPF calculations."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfGlobalEntry 60 }
+
+ rosMgmtOspfLoopFreeAlt OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enable OSPF Loop-Free Alternate(LFA)."
+ ::= { rosMgmtOspfGlobalEntry 61 }
+
+
+-- rosMgmtOspfAreaTable
+-- The OSPF Area Table contains information
+-- regarding the various areas.
+ rosMgmtOspfAreaTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information describing the configured parameters and
+ cumulative statistics of the router's attached areas.
+ The interfaces and virtual links are configured
+ as part of these areas. Area 0.0.0.0, by definition,
+ is the backbone area."
+ REFERENCE
+ "OSPF Version 2, Section 6 The Area Data Structure"
+ ::= { rosMgmtOspfObjects 2 }
+
+ rosMgmtOspfAreaEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information describing the configured parameters and
+ cumulative statistics of one of the router's attached areas.
+ The interfaces and virtual links are configured as part of
+ these areas. Area 0.0.0.0, by definition, is the backbone
+ area.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfAreaId }
+ ::= { rosMgmtOspfAreaTable 1 }
+
+ RosMgmtOspfAreaEntry ::=
+ SEQUENCE {
+ rosMgmtOspfAreaId
+ AreaID,
+ rosMgmtOspfAuthType
+ OspfAuthenticationType,
+ rosMgmtOspfImportAsExtern
+ INTEGER,
+ rosMgmtOspfSpfRuns
+ Counter32,
+ rosMgmtOspfAreaBdrRtrCount
+ Gauge32,
+ rosMgmtOspfAsBdrRtrCount
+ Gauge32,
+ rosMgmtOspfAreaLsaCount
+ Gauge32,
+ rosMgmtOspfAreaLsaCksumSum
+ Integer32,
+ rosMgmtOspfAreaSummary
+ INTEGER,
+ rosMgmtOspfAreaNssaTranslatorRole
+ INTEGER,
+ rosMgmtOspfAreaNssaTranslatorState
+ INTEGER,
+ rosMgmtOspfAreaNssaTranslatorStabilityInterval
+ PositiveInteger,
+ rosMgmtOspfAreaNssaTranslatorEvents
+ Counter32,
+ rosMgmtOspfAreaDefaultCost
+ BigMetric,
+ rosMgmtOspfAreaType
+ INTEGER,
+ rosMgmtOspfAreaStatus
+ RowStatus,
+ rosMgmtOspfAreaFilterInIpPrefixListName
+ OCTET STRING,
+ rosMgmtOspfAreaFilterOutIpPrefixListName
+ OCTET STRING,
+ rosMgmtOspfAreaTeCapability
+ TruthValue
+ }
+
+ rosMgmtOspfAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying an area.
+ Area ID 0.0.0.0 is used for the OSPF backbone."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { rosMgmtOspfAreaEntry 1 }
+
+ rosMgmtOspfAuthType OBJECT-TYPE
+ SYNTAX OspfAuthenticationType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The authentication type specified for an area."
+ REFERENCE
+ "OSPF Version 2, Appendix D Authentication"
+ DEFVAL { none } -- no authentication, by default
+ ::= { rosMgmtOspfAreaEntry 2 }
+
+ rosMgmtOspfImportAsExtern OBJECT-TYPE
+ SYNTAX INTEGER {
+ importExternal (1),
+ importNoExternal (2),
+ importNssa (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates if an area is a stub area, NSSA, or standard
+ area. Type-5 AS-external LSAs and type-11 Opaque LSAs are
+ not imported into stub areas or NSSAs. NSSAs import
+ AS-external data as type-7 LSAs"
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ DEFVAL { importExternal }
+ ::= { rosMgmtOspfAreaEntry 3 }
+
+ rosMgmtOspfSpfRuns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times that the intra-area route
+ table has been calculated using this area's
+ link state database. This is typically done
+ using Dijkstra's algorithm.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at other
+ times as indicated by the value of ospfDiscontinuityTime."
+ ::= { rosMgmtOspfAreaEntry 4 }
+
+ rosMgmtOspfAreaBdrRtrCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of Area Border Routers reachable
+ within this area. This is initially zero and is
+ calculated in each Shortest Path First (SPF) pass."
+
+ ::= { rosMgmtOspfAreaEntry 5 }
+
+ rosMgmtOspfAsBdrRtrCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of Autonomous System Border
+ Routers reachable within this area. This is
+ initially zero and is calculated in each SPF
+ pass."
+ ::= { rosMgmtOspfAreaEntry 6 }
+
+ rosMgmtOspfAreaLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of link state advertisements
+ in this area's link state database, excluding
+ AS-external LSAs."
+ ::= { rosMgmtOspfAreaEntry 7 }
+
+ rosMgmtOspfAreaLsaCksumSum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit sum of the link state
+ advertisements' LS checksums contained in this
+ area's link state database. This sum excludes
+ external (LS type-5) link state advertisements.
+ The sum can be used to determine if there has
+ been a change in a router's link state
+ database, and to compare the link state database of
+ two routers. The value should be treated as unsigned
+ when comparing two sums of checksums."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfAreaEntry 8 }
+
+ rosMgmtOspfAreaSummary OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAreaSummary (1),
+ sendAreaSummary (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+ "The variable ospfAreaSummary controls the
+ import of summary LSAs into stub and NSSA areas.
+ It has no effect on other areas.
+
+ If it is noAreaSummary, the router will not
+ originate summary LSAs into the stub or NSSA area.
+ It will rely entirely on its default route.
+
+ If it is sendAreaSummary, the router will both
+ summarize and propagate summary LSAs."
+ DEFVAL { sendAreaSummary }
+ ::= { rosMgmtOspfAreaEntry 9 }
+
+
+ rosMgmtOspfAreaNssaTranslatorRole OBJECT-TYPE
+ SYNTAX INTEGER { always (1), candidate (2) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates an NSSA border router's ability to
+ perform NSSA translation of type-7 LSAs into
+ type-5 LSAs."
+ DEFVAL { candidate }
+ ::= { rosMgmtOspfAreaEntry 10 }
+
+ rosMgmtOspfAreaNssaTranslatorState OBJECT-TYPE
+ SYNTAX INTEGER { enabled (1),
+ elected (2),
+ disabled (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates if and how an NSSA border router is
+ performing NSSA translation of type-7 LSAs into type-5
+
+ LSAs. When this object is set to enabled, the NSSA Border
+ router's OspfAreaNssaExtTranslatorRole has been set to
+ always. When this object is set to elected, a candidate
+ NSSA Border router is Translating type-7 LSAs into type-5.
+ When this object is set to disabled, a candidate NSSA
+ border router is NOT translating type-7 LSAs into type-5."
+ ::= { rosMgmtOspfAreaEntry 11 }
+
+ rosMgmtOspfAreaNssaTranslatorStabilityInterval OBJECT-TYPE
+ SYNTAX PositiveInteger
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds after an elected translator
+ determines its services are no longer required, that
+ it should continue to perform its translation duties."
+ DEFVAL { 40 }
+ ::= { rosMgmtOspfAreaEntry 12 }
+
+ rosMgmtOspfAreaNssaTranslatorEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the number of translator state changes
+ that have occurred since the last boot-up.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at other
+ times as indicated by the value of ospfDiscontinuityTime."
+ ::= { rosMgmtOspfAreaEntry 13 }
+
+ rosMgmtOspfAreaDefaultCost OBJECT-TYPE
+ SYNTAX BigMetric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "It indicates the cost of default route of NSSA area or
+ stub area."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfAreaEntry 14 }
+
+ rosMgmtOspfAreaType OBJECT-TYPE
+ SYNTAX INTEGER {
+ backbone (1),
+ normal (2),
+ stub (3),
+ nssa (4),
+ transmit (5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the type of
+ area,area 0 indicates backbone, area that has virtual-links is
+ transmit area. When area is configured as stub,it's a stub area, and
+ same as nssa area.other areas are called normal areas."
+ ::= { rosMgmtOspfAreaEntry 15 }
+
+ rosMgmtOspfAreaStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfAreaEntry 16 }
+ rosMgmtOspfAreaFilterInIpPrefixListName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Filter incoming summary lsa,the value of this object
+ indicates the name of an ip-prefix-list."
+ ::= { rosMgmtOspfAreaEntry 17 }
+
+ rosMgmtOspfAreaFilterOutIpPrefixListName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Filter outgoing summary lsa,the value of this object
+ indicates the name of an ip-prefix-list."
+ ::= { rosMgmtOspfAreaEntry 18 }
+
+ rosMgmtOspfAreaTeCapability OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicate Area TE enable state."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { rosMgmtOspfAreaEntry 19 }
+
+
+-- rosMgmtOspfNetWorkTable
+-- The OSPF netwrok Table contains information
+-- regarding the various areas.
+rosMgmtOspfNetWorkTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfNetWorkEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The list of directly-connected networks which enable
+ the OSPF function."
+ ::= { rosMgmtOspfObjects 3 }
+
+ rosMgmtOspfNetWorkEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfNetWorkEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines an entry in the rosMgmtOspfNetWorkTable.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfAreaId,
+ rosMgmtOspfNet,
+ rosMgmtOspfMask }
+ ::= { rosMgmtOspfNetWorkTable 1 }
+
+ RosMgmtOspfNetWorkEntry ::=
+ SEQUENCE {
+ rosMgmtOspfNet
+ IpAddress,
+ rosMgmtOspfMask
+ IpAddress,
+ rosMgmtOspfNetWorkStatus
+ RowStatus
+ }
+
+ rosMgmtOspfNet OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IP address of the net or subnet indicated
+ by the range."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { rosMgmtOspfNetWorkEntry 1 }
+
+ rosMgmtOspfMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The subnet mask that pertains to the net or
+ subnet."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { rosMgmtOspfNetWorkEntry 2 }
+
+ rosMgmtOspfNetWorkStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfNetWorkEntry 3 }
+
+--rosMgmtOspfStubAreaTable
+--
+--The table define ospf stub area
+ rosMgmtOspfStubAreaTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfStubAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The set of metrics that will be advertised
+ by a default Area Border Router into a stub area."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2, Area Parameters"
+ ::= { rosMgmtOspfObjects 4 }
+
+ rosMgmtOspfStubAreaEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfStubAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The metric for a given Type of Service that
+ will be advertised by a default Area Border
+ Router into a stub area.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2, Area Parameters"
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfStubAreaId }
+ ::= { rosMgmtOspfStubAreaTable 1 }
+
+ RosMgmtOspfStubAreaEntry ::=
+ SEQUENCE {
+ rosMgmtOspfStubAreaId
+ AreaID,
+ rosMgmtOspfStubAreaOption
+ TruthValue,
+ rosMgmtOspfStubAreaStatus
+ RowStatus
+ }
+
+ rosMgmtOspfStubAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS not-accessible -- read-only since originally an
+ -- SMIv1 index
+ STATUS current
+ DESCRIPTION
+ "The 32-bit identifier for the stub area. On
+ creation, this can be derived from the
+ instance."
+ ::= { rosMgmtOspfStubAreaEntry 1 }
+
+ rosMgmtOspfStubAreaOption OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The option of STUB area.True means that ABR cann't send summary lsa to
+ stub area."
+ ::= { rosMgmtOspfStubAreaEntry 2 }
+
+ rosMgmtOspfStubAreaStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfStubAreaEntry 3 }
+
+--rosMgmtOspfNssaAreaTable
+--
+--The table define ospf nssa area
+ rosMgmtOspfNssaAreaTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfNssaAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The set of metrics that will be advertised
+ by a default Area Border Router into a Nssa area."
+ REFERENCE
+ "Rfc 1587"
+ ::= { rosMgmtOspfObjects 5 }
+
+ rosMgmtOspfNssaAreaEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfNssaAreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The metric for a given Type of Service that
+ will be advertised by a default Area Border
+ Router into a Nssa area.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ REFERENCE
+ "Rfc 1587"
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfNssaAreaId }
+ ::= { rosMgmtOspfNssaAreaTable 1 }
+
+ RosMgmtOspfNssaAreaEntry ::=
+ SEQUENCE {
+ rosMgmtOspfNssaAreaId
+ AreaID,
+ rosMgmtOspfNssaAreaOption
+ INTEGER,
+ rosMgmtOspfNssaAreaStatus
+ RowStatus
+ }
+
+ rosMgmtOspfNssaAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS not-accessible -- read-only since originally an
+ -- SMIv1 index
+ STATUS current
+ DESCRIPTION
+ "The 32-bit identifier for the nssa area. On
+ creation, this can be derived from the
+ instance."
+ ::= { rosMgmtOspfNssaAreaEntry 1 }
+
+ rosMgmtOspfNssaAreaOption OBJECT-TYPE
+ SYNTAX INTEGER {
+ summarysend (0),
+ nosummary (4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The option of Nssa area. If first bit is set, Router should generate
+ default type-7 lsa; if second bit is set, nssa area cann't import ex-
+ ternal route; if third bit is set, ABR cann't send summary lsas to the
+ nssa area."
+ ::= { rosMgmtOspfNssaAreaEntry 2 }
+
+ rosMgmtOspfNssaAreaStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfNssaAreaEntry 3 }
+
+
+-- rosMgmtOspfIfTable
+-- OSPF Interface Table
+--
+ rosMgmtOspfIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPF Interface Table describes the interfaces
+ from the viewpoint of OSPF.
+ It augments the ipAddrTable with OSPF specific information."
+ REFERENCE
+ "OSPF Version 2, Appendix C.3 Router interface
+ parameters"
+ ::= { rosMgmtOspfObjects 6 }
+
+ rosMgmtOspfIfEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPF interface entry describes one interface
+ from the viewpoint of OSPF.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfAddressLessIf }
+ ::= { rosMgmtOspfIfTable 1 }
+
+ RosMgmtOspfIfEntry ::=
+ SEQUENCE {
+ rosMgmtOspfAddressLessIf
+ InterfaceIndexOrZero,
+ rosMgmtOspfIfIpAddress
+ IpAddress,
+ rosMgmtOspfIfAreaId
+ AreaID,
+ rosMgmtOspfIfType
+ INTEGER,
+ rosMgmtOspfIfAdminStat
+ Status,
+ rosMgmtOspfIfRtrPriority
+ DesignatedRouterPriority,
+ rosMgmtOspfIfTransitDelay
+ Integer32,
+ rosMgmtOspfIfRetransInterval
+ Integer32,
+ rosMgmtOspfIfHelloInterval
+ Integer32,
+ rosMgmtOspfIfRtrDeadInterval
+ Integer32,
+ rosMgmtOspfIfPollInterval
+ Integer32,
+ rosMgmtOspfIfState
+ INTEGER,
+ rosMgmtOspfIfDesignatedRouter
+ IpAddress,
+ rosMgmtOspfIfBackupDesignatedRouter
+ IpAddress,
+ rosMgmtOspfIfEvents
+ Counter32,
+ rosMgmtOspfIfAuthKeyId
+ Integer32,
+ rosMgmtOspfIfAuthSimpleKeyType
+ INTEGER,
+ rosMgmtOspfIfAuthMd5KeyType
+ INTEGER,
+ rosMgmtOspfIfAuthSimpleKey
+ OCTET STRING,
+ rosMgmtOspfIfAuthMd5Key
+ OCTET STRING,
+ rosMgmtOspfIfAuthKeyChain
+ OCTET STRING,
+ rosMgmtOspfIfAuthType
+ OspfAuthenticationType,
+ rosMgmtOspfIfLsaCount
+ Gauge32,
+ rosMgmtOspfIfLsaCksumSum
+ Unsigned32,
+ rosMgmtOspfIfDesignatedRouterId
+ RouterID,
+ rosMgmtOspfIfBackupDesignatedRouterId
+ RouterID,
+ rosMgmtOspfIfPassive
+ EnableVar,
+ rosMgmtOspfIfMtu
+ EnableVar,
+ rosMgmtOspfIfMetric
+ Metric,
+ rosMgmtOspfIfBfd
+ EnableVar,
+ rosMgmtOspfIfGRResync
+ Integer32
+ }
+
+ rosMgmtOspfAddressLessIf OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For the purpose of easing the instancing of
+ addressed and addressless interfaces; this
+ variable takes the value 0 on interfaces with
+ IP addresses and the corresponding value of
+ ifIndex for interfaces having no IP address."
+ ::= { rosMgmtOspfIfEntry 1 }
+
+ rosMgmtOspfIfIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of this OSPF interface."
+
+ ::= { rosMgmtOspfIfEntry 2 }
+
+ rosMgmtOspfIfAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the area
+ to which the interface connects. Area ID
+ 0.0.0.0 is used for the OSPF backbone."
+ DEFVAL { '00000000'H } -- 0.0.0.0
+ ::= { rosMgmtOspfIfEntry 3 }
+
+ rosMgmtOspfIfType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none (0),
+ pointToPoint (1),
+ broadcast (2),
+ nbma (3),
+ pointToMultipoint (4),
+ virtuallink (5),
+ loopback (6)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The OSPF interface type.
+ By way of a default, this field may be intuited
+ from the corresponding value of ifType.
+ Broadcast LANs, such as Ethernet and IEEE 802.5,
+ take the value 'broadcast', X.25 and similar
+ technologies take the value 'nbma', and links
+ that are definitively point to point take the
+ value 'pointToPoint'."
+ DEFVAL {broadcast}
+ ::= { rosMgmtOspfIfEntry 4 }
+
+ rosMgmtOspfIfAdminStat OBJECT-TYPE
+ SYNTAX Status
+
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The OSPF interface's administrative status.
+ The value formed on the interface, and the interface
+ will be advertised as an internal route to some area.
+ The value 'disabled' denotes that the interface is
+ external to OSPF."
+ DEFVAL { enabled }
+ ::= { rosMgmtOspfIfEntry 5 }
+
+ rosMgmtOspfIfRtrPriority OBJECT-TYPE
+ SYNTAX DesignatedRouterPriority
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The priority of this interface. Used in
+ multi-access networks, this field is used in
+ the designated router election algorithm. The
+ value 0 signifies that the router is not eligible
+ to become the designated router on this particular
+ network. In the event of a tie in this value,
+ routers will use their Router ID as a tie breaker."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfIfEntry 6 }
+
+ rosMgmtOspfIfTransitDelay OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The estimated number of seconds it takes to
+ transmit a link state update packet over this
+ interface. Note that the minimal value SHOULD be
+ 1 second."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfIfEntry 7 }
+
+ rosMgmtOspfIfRetransInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds between link state advertisement
+ retransmissions, for adjacencies belonging to this
+ interface. This value is also used when retransmitting
+
+ database description and Link State request packets.
+ Note that minimal value SHOULD be 1 second."
+ DEFVAL { 5 }
+ ::= { rosMgmtOspfIfEntry 8 }
+
+ rosMgmtOspfIfHelloInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The length of time, in seconds, between the Hello packets
+ that the router sends on the interface. This value must be
+ the same for all routers attached to a common network."
+ DEFVAL { 10 }
+ ::= { rosMgmtOspfIfEntry 9 }
+
+ rosMgmtOspfIfRtrDeadInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that a router's Hello packets have
+ not been seen before its neighbors declare the router down.
+ This should be some multiple of the Hello interval. This
+ value must be the same for all routers attached to a common
+ network."
+ DEFVAL { 40 }
+ ::= { rosMgmtOspfIfEntry 10 }
+
+ rosMgmtOspfIfPollInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The larger time interval, in seconds, between the Hello
+ packets sent to an inactive non-broadcast multi-access
+ neighbor."
+ DEFVAL { 120 }
+ ::= { rosMgmtOspfIfEntry 11 }
+
+ rosMgmtOspfIfState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (1),
+ loopback (2),
+ waiting (3),
+ pointToPoint (4),
+ designatedRouter (5),
+ backupDesignatedRouter (6),
+ otherDesignatedRouter (7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The OSPF Interface State."
+ DEFVAL { down }
+ ::= { rosMgmtOspfIfEntry 12 }
+
+ rosMgmtOspfIfDesignatedRouter OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of the designated router."
+ DEFVAL { '00000000'H } -- 0.0.0.0
+ ::= { rosMgmtOspfIfEntry 13 }
+
+ rosMgmtOspfIfBackupDesignatedRouter OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of the backup designated
+ router."
+ DEFVAL { '00000000'H } -- 0.0.0.0
+ ::= { rosMgmtOspfIfEntry 14 }
+
+ rosMgmtOspfIfEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this OSPF interface has
+ changed its state or an error has occurred.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at other
+ times as indicated by the value of ospfDiscontinuityTime."
+ ::= { rosMgmtOspfIfEntry 15 }
+
+ rosMgmtOspfIfAuthKeyId OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The key id of md5 authentication."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfIfEntry 16 }
+
+ rosMgmtOspfIfAuthSimpleKeyType OBJECT-TYPE
+ SYNTAX INTEGER {plain(0), cipher(7)}
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of password for simple authentication."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfIfEntry 17 }
+
+ rosMgmtOspfIfAuthMd5KeyType OBJECT-TYPE
+ SYNTAX INTEGER {plain(0), cipher(7)}
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of password for md5 authentication."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfIfEntry 18 }
+
+ rosMgmtOspfIfAuthSimpleKey OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The password used as an OSPF
+ authentication key when simple password security
+ is enabled."
+ DEFVAL {''h}
+ ::= { rosMgmtOspfIfEntry 19 }
+
+ rosMgmtOspfIfAuthMd5Key OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The password used as an OSPF
+ authentication key when md5 security
+ is enabled."
+ DEFVAL {''h}
+ ::= { rosMgmtOspfIfEntry 20 }
+
+ rosMgmtOspfIfAuthKeyChain OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The name of key chain."
+ DEFVAL {''h}
+ ::= { rosMgmtOspfIfEntry 21 }
+
+ rosMgmtOspfIfAuthType OBJECT-TYPE
+ SYNTAX OspfAuthenticationType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The authentication type specified for an interface.
+
+ Note that this object can be used to engage
+ in significant attacks against an OSPF router."
+ REFERENCE
+ "OSPF Version 2, Appendix D Authentication"
+ DEFVAL { none } -- no authentication, by default
+ ::= { rosMgmtOspfIfEntry 22 }
+
+ rosMgmtOspfIfLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of link-local link state advertisements
+ in this interface's link-local link state database."
+ ::= { rosMgmtOspfIfEntry 23 }
+
+ rosMgmtOspfIfLsaCksumSum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit unsigned sum of the Link State
+ Advertisements' LS checksums contained in this
+ interface's link-local link state database.
+ The sum can be used to determine if there has
+ been a change in the interface's link state
+ database and to compare the interface link state
+ database of routers attached to the same subnet."
+ ::= { rosMgmtOspfIfEntry 24 }
+
+ rosMgmtOspfIfDesignatedRouterId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Router ID of the designated router."
+ ::= { rosMgmtOspfIfEntry 25 }
+
+ rosMgmtOspfIfBackupDesignatedRouterId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Router ID of the backup designated router."
+ ::= { rosMgmtOspfIfEntry 26 }
+
+ rosMgmtOspfIfPassive OBJECT-TYPE
+ SYNTAX EnableVar
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicate the interface is a passive interface."
+ DEFVAL {disable}
+ ::= { rosMgmtOspfIfEntry 27 }
+
+ rosMgmtOspfIfMtu OBJECT-TYPE
+ SYNTAX EnableVar
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicate ignore the interface's mtu."
+ DEFVAL {disable}
+ ::= { rosMgmtOspfIfEntry 28 }
+
+ rosMgmtOspfIfMetric OBJECT-TYPE
+ SYNTAX Metric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The metric of using this Type of Service on
+ this interface. The default value of the TOS 0
+ metric is 10^8 / ifSpeed."
+ ::= { rosMgmtOspfIfEntry 29 }
+
+ rosMgmtOspfIfBfd OBJECT-TYPE
+ SYNTAX EnableVar
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicate the interface enables BFD function."
+ DEFVAL {disable}
+ ::= { rosMgmtOspfIfEntry 30 }
+
+ rosMgmtOspfIfGRResync OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The interval period starts from the time a
+ restart signal is received from a neighbor."
+ DEFVAL { 40 }
+ ::= { rosMgmtOspfIfEntry 31 }
+
+--rosMgmtOspfVirtIfTable
+--
+--OSPF Virtual Interface Table
+ rosMgmtOspfVirtIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfVirtIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about this router's virtual interfaces
+ that the OSPF Process is configured to carry on."
+ REFERENCE
+ "OSPF Version 2, Appendix C.4 Virtual link
+ parameters"
+ ::= { rosMgmtOspfObjects 7 }
+
+ rosMgmtOspfVirtIfEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfVirtIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a single virtual interface.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfVirtIfAreaId,
+ rosMgmtOspfVirtIfNeighbor }
+ ::= { rosMgmtOspfVirtIfTable 1 }
+
+ RosMgmtOspfVirtIfEntry ::=
+ SEQUENCE {
+ rosMgmtOspfVirtIfAreaId
+ AreaID,
+ rosMgmtOspfVirtIfNeighbor
+ RouterID,
+ rosMgmtOspfVirtIfTransitDelay
+ UpToMaxAge,
+ rosMgmtOspfVirtIfRetransInterval
+ UpToMaxAge,
+ rosMgmtOspfVirtIfHelloInterval
+ HelloRange,
+ rosMgmtOspfVirtIfRtrDeadInterval
+ PositiveInteger,
+ rosMgmtOspfVirtIfState
+ INTEGER,
+ rosMgmtOspfVirtIfEvents
+ Counter32,
+ rosMgmtOspfVirtIfAuthKeyId
+ Integer32,
+ rosMgmtOspfVirtIfAuthSimpleKeyType
+ INTEGER,
+ rosMgmtOspfVirtIfAuthMd5KeyType
+ INTEGER,
+ rosMgmtOspfVirtIfAuthSimpleKey
+ OCTET STRING,
+ rosMgmtOspfVirtIfAuthMd5Key
+ OCTET STRING,
+ rosMgmtOspfVirtIfAuthKeyChain
+ OCTET STRING,
+ rosMgmtOspfVirtIfAuthType
+ OspfAuthenticationType,
+ rosMgmtOspfVirtIfLsaCount
+ Gauge32,
+ rosMgmtOspfVirtIfLsaCksumSum
+ Unsigned32,
+ rosMgmtOspfVirtIfCost
+ Integer32,
+ rosMgmtOspfVirtIfStatus
+ RowStatus
+ }
+
+ rosMgmtOspfVirtIfAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The transit area that the virtual link
+ traverses. By definition, this is not 0.0.0.0."
+ ::= { rosMgmtOspfVirtIfEntry 1 }
+
+ rosMgmtOspfVirtIfNeighbor OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Router ID of the virtual neighbor."
+ ::= { rosMgmtOspfVirtIfEntry 2 }
+
+ rosMgmtOspfVirtIfTransitDelay OBJECT-TYPE
+ SYNTAX UpToMaxAge
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The estimated number of seconds it takes to
+ transmit a Link State update packet over this
+ interface. Note that the minimal value SHOULD be
+ 1 second."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfVirtIfEntry 3 }
+
+ rosMgmtOspfVirtIfRetransInterval OBJECT-TYPE
+ SYNTAX UpToMaxAge
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds between link state
+ avertisement retransmissions, for adjacencies
+ belonging to this interface. This value is
+ also used when retransmitting database
+ description and Link State request packets. This
+ value should be well over the expected
+ round-trip time. Note that the minimal value SHOULD be
+ 1 second."
+ DEFVAL { 5 }
+ ::= { rosMgmtOspfVirtIfEntry 4 }
+
+ rosMgmtOspfVirtIfHelloInterval OBJECT-TYPE
+ SYNTAX HelloRange
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The length of time, in seconds, between the
+ Hello packets that the router sends on the
+ interface. This value must be the same for the
+ virtual neighbor."
+ DEFVAL { 10 }
+ ::= { rosMgmtOspfVirtIfEntry 5 }
+
+ rosMgmtOspfVirtIfRtrDeadInterval OBJECT-TYPE
+
+ SYNTAX PositiveInteger
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that a router's Hello
+ packets have not been seen before its
+ neighbors declare the router down. This should be
+ some multiple of the Hello interval. This
+ value must be the same for the virtual neighbor."
+ DEFVAL { 60 }
+ ::= { rosMgmtOspfVirtIfEntry 6 }
+
+ rosMgmtOspfVirtIfState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (1), -- these use the same encoding
+ pointToPoint (4) -- as the rosMgmtOspfIfTable
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "OSPF virtual interface states."
+ DEFVAL { down }
+ ::= { rosMgmtOspfVirtIfEntry 7 }
+
+ rosMgmtOspfVirtIfEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of state changes or error events on
+ this virtual link.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at other
+ times as indicated by the value of ospfDiscontinuityTime."
+ ::= { rosMgmtOspfVirtIfEntry 8 }
+
+ rosMgmtOspfVirtIfAuthKeyId OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The key id of md5 authentication."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfVirtIfEntry 9 }
+
+ rosMgmtOspfVirtIfAuthSimpleKeyType OBJECT-TYPE
+ SYNTAX INTEGER {plain(0), cipher(7)}
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of password for simple authentication."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfVirtIfEntry 10 }
+
+ rosMgmtOspfVirtIfAuthMd5KeyType OBJECT-TYPE
+ SYNTAX INTEGER {plain(0), cipher(7)}
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of password for md5 authentication."
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfVirtIfEntry 11 }
+
+ rosMgmtOspfVirtIfAuthSimpleKey OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+
+ DESCRIPTION
+ "The password used as an OSPF
+ authentication key when simple password security
+ is enabled."
+ DEFVAL {''h}
+ ::= { rosMgmtOspfVirtIfEntry 12 }
+
+ rosMgmtOspfVirtIfAuthMd5Key OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The password used as an OSPF
+ authentication key when md5 security
+ is enabled."
+ DEFVAL {''h}
+ ::= { rosMgmtOspfVirtIfEntry 13 }
+
+ rosMgmtOspfVirtIfAuthKeyChain OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The name of key chain."
+ DEFVAL {''h}
+ ::= { rosMgmtOspfVirtIfEntry 14 }
+
+ rosMgmtOspfVirtIfAuthType OBJECT-TYPE
+ SYNTAX OspfAuthenticationType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The authentication type specified for a virtual interface.
+
+ Note that this object can be used to engage
+ in significant attacks against an OSPF router."
+ REFERENCE
+ "OSPF Version 2, Appendix E Authentication"
+ DEFVAL { none } -- no authentication, by default
+
+ ::= { rosMgmtOspfVirtIfEntry 15 }
+
+ rosMgmtOspfVirtIfLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of link-local link state advertisements
+ in this virtual interface's link-local link state database."
+ ::= { rosMgmtOspfVirtIfEntry 16 }
+
+ rosMgmtOspfVirtIfLsaCksumSum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit unsigned sum of the link state
+ advertisements' LS checksums contained in this
+ virtual interface's link-local link state database.
+ The sum can be used to determine if there has
+ been a change in the virtual interface's link state
+ database, and to compare the virtual interface
+ link state database of the virtual neighbors."
+ ::= { rosMgmtOspfVirtIfEntry 17 }
+
+ rosMgmtOspfVirtIfCost OBJECT-TYPE
+ SYNTAX Integer32 (1.. 65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the cost of
+ virtual interface."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfVirtIfEntry 18 }
+
+ rosMgmtOspfVirtIfStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfVirtIfEntry 19 }
+
+--rosMgmtOspfNbrTable
+--
+--OSPF Neighbor Table
+ rosMgmtOspfNbrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table describing all non-virtual neighbors
+ in the locality of the OSPF router."
+ REFERENCE
+ "OSPF Version 2, Section 10 The Neighbor Data
+ Structure"
+ ::= { rosMgmtOspfObjects 8 }
+
+ rosMgmtOspfNbrEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The information regarding a single neighbor.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ REFERENCE
+ "OSPF Version 2, Section 10 The Neighbor Data
+ Structure"
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfNbrIpAddr,
+ rosMgmtOspfNbrAddressLessIndex }
+ ::= { rosMgmtOspfNbrTable 1 }
+
+ RosMgmtOspfNbrEntry ::=
+ SEQUENCE {
+ rosMgmtOspfNbrIpAddr
+ IpAddress,
+ rosMgmtOspfNbrAddressLessIndex
+ InterfaceIndexOrZero,
+ rosMgmtOspfNbrRtrId
+ RouterID,
+ rosMgmtOspfNbrOptions
+ Integer32,
+ rosMgmtOspfNbrPriority
+ DesignatedRouterPriority,
+ rosMgmtOspfNbrState
+ INTEGER,
+ rosMgmtOspfNbrEvents
+ Counter32,
+ rosMgmtOspfNbrLsRetransQLen
+ Gauge32,
+ rosMgmtOspfNbrMode
+ INTEGER
+ }
+
+ rosMgmtOspfNbrIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only -- read-only since originally an
+ -- SMIv1 index
+ STATUS current
+ DESCRIPTION
+ "The IP address this neighbor is using in its
+ IP source address. Note that, on addressless
+ links, this will not be 0.0.0.0 but the
+
+ address of another of the neighbor's interfaces."
+ ::= { rosMgmtOspfNbrEntry 1 }
+
+ rosMgmtOspfNbrAddressLessIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only -- read-only since originally an
+ -- SMIv1 index
+ STATUS current
+ DESCRIPTION
+ "On an interface having an IP address, zero.
+ On addressless interfaces, the corresponding
+ value of ifIndex in the Internet Standard MIB.
+ On row creation, this can be derived from the
+ instance."
+ ::= { rosMgmtOspfNbrEntry 2 }
+
+ rosMgmtOspfNbrRtrId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer (represented as a type
+ IpAddress) uniquely identifying the neighboring
+ router in the Autonomous System."
+ DEFVAL { '00000000'H } -- 0.0.0.0
+ ::= { rosMgmtOspfNbrEntry 3 }
+
+ rosMgmtOspfNbrOptions OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A bit mask corresponding to the neighbor's
+ options field.
+
+ Bit 0, if set, indicates that the system will
+ operate on Type of Service metrics other than
+ TOS 0. If zero, the neighbor will ignore all
+ metrics except the TOS 0 metric.
+
+ Bit 1, if set, indicates that the associated
+ area accepts and operates on external
+ information; if zero, it is a stub area.
+
+ Bit 2, if set, indicates that the system is
+ capable of routing IP multicast datagrams, that is
+ that it implements the multicast extensions to
+ OSPF.
+
+ Bit 3, if set, indicates that the associated
+ area is an NSSA. These areas are capable of
+ carrying type-7 external advertisements, which
+ are translated into type-5 external advertisements
+ at NSSA borders."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.2 Options"
+ DEFVAL { 0 }
+ ::= { rosMgmtOspfNbrEntry 4 }
+
+ rosMgmtOspfNbrPriority OBJECT-TYPE
+ SYNTAX DesignatedRouterPriority
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The priority of this neighbor in the designated
+ router election algorithm. The value 0 signifies
+ that the neighbor is not eligible to become
+ the designated router on this particular network."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfNbrEntry 5 }
+
+ rosMgmtOspfNbrState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (1),
+ attempt (2),
+ init (3),
+ twoWay (4),
+ exchangeStart (5),
+ exchange (6),
+ loading (7),
+ full (8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The state of the relationship with this neighbor."
+ REFERENCE
+ "OSPF Version 2, Section 10.1 Neighbor States"
+ DEFVAL { down }
+ ::= { rosMgmtOspfNbrEntry 6 }
+
+ rosMgmtOspfNbrEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this neighbor relationship
+ has changed state or an error has occurred.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at other
+ times as indicated by the value of ospfDiscontinuityTime."
+ ::= { rosMgmtOspfNbrEntry 7 }
+
+ rosMgmtOspfNbrLsRetransQLen OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current length of the retransmission
+ queue."
+ ::= { rosMgmtOspfNbrEntry 8 }
+
+ rosMgmtOspfNbrMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ slave (1),
+ master (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the master-slave mode of
+ neighbor. "
+ DEFVAL { slave }
+ ::= { rosMgmtOspfNbrEntry 9 }
+
+--rosMgmtOspfNbmaCfgNbrTable
+--
+--OSPF Nbma Network Configed Neighbor Table
+ rosMgmtOspfNbmaCfgNbrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfNbmaCfgNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table describing all configured neigbors on nbma network."
+ ::= { rosMgmtOspfObjects 9 }
+
+ rosMgmtOspfNbmaCfgNbrEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfNbmaCfgNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The information regarding a Configured neighbor.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ REFERENCE
+ "OSPF Version 2, Section 10 The Neighbor Data
+ Structure"
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfNbmaCfgNbrIpAddr }
+ ::= { rosMgmtOspfNbmaCfgNbrTable 1 }
+
+ RosMgmtOspfNbmaCfgNbrEntry ::=
+ SEQUENCE {
+ rosMgmtOspfNbmaCfgNbrIpAddr
+ IpAddress,
+ rosMgmtOspfNbmaCfgNbrPriority
+ DesignatedRouterPriority,
+ rosMgmtOspfNbmaCfgNbrStatus
+ RowStatus
+ }
+
+ rosMgmtOspfNbmaCfgNbrIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IP address this neighbor is using in its
+ IP source address. Note that, on addressless
+ links, this will not be 0.0.0.0 but the
+ address of another of the neighbor's interfaces."
+ ::= { rosMgmtOspfNbmaCfgNbrEntry 1 }
+
+ rosMgmtOspfNbmaCfgNbrPriority OBJECT-TYPE
+ SYNTAX DesignatedRouterPriority
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The priority of this neighbor in the designated
+ router election algorithm. The value 0 signifies
+ that the neighbor is not eligible to become
+ the designated router on this particular network."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfNbmaCfgNbrEntry 2 }
+
+ rosMgmtOspfNbmaCfgNbrStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfNbmaCfgNbrEntry 3 }
+
+--rosMgmtOspfVirtNbrTable
+--
+--OSPF Virtual Neighbor Table
+ rosMgmtOspfVirtNbrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfVirtNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table describes all virtual neighbors.
+ Since virtual links are configured
+ in the Virtual Interface Table, this table is read-only."
+ REFERENCE
+ "OSPF Version 2, Section 15 Virtual Links"
+ ::= { rosMgmtOspfObjects 10 }
+
+ rosMgmtOspfVirtNbrEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfVirtNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Virtual neighbor information."
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfVirtNbrArea,
+ rosMgmtOspfVirtNbrRtrId }
+ ::= { rosMgmtOspfVirtNbrTable 1 }
+
+ RosMgmtOspfVirtNbrEntry ::=
+ SEQUENCE {
+ rosMgmtOspfVirtNbrArea
+ AreaID,
+ rosMgmtOspfVirtNbrRtrId
+ RouterID,
+ rosMgmtOspfVirtNbrIpAddr
+ IpAddress,
+ rosMgmtOspfVirtNbrOptions
+ Integer32,
+ rosMgmtOspfVirtNbrState
+ INTEGER,
+ rosMgmtOspfVirtNbrEvents
+ Counter32,
+ rosMgmtOspfVirtNbrLsRetransQLen
+ Gauge32,
+ rosMgmtOspfVirtNbrLessIf
+ Integer32,
+ rosMgmtOspfVirtNbrMode
+ INTEGER
+ }
+
+ rosMgmtOspfVirtNbrArea OBJECT-TYPE
+
+ SYNTAX AreaID
+ MAX-ACCESS read-only -- read-only since originally an
+ -- SMIv1 index
+ STATUS current
+ DESCRIPTION
+ "The Transit Area Identifier."
+ ::= { rosMgmtOspfVirtNbrEntry 1 }
+
+ rosMgmtOspfVirtNbrRtrId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only -- read-only since originally an
+ -- SMIv1 index
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the
+ neighboring router in the Autonomous System."
+ ::= { rosMgmtOspfVirtNbrEntry 2 }
+
+ rosMgmtOspfVirtNbrIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address this virtual neighbor is using."
+ ::= { rosMgmtOspfVirtNbrEntry 3 }
+
+ rosMgmtOspfVirtNbrOptions OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A bit mask corresponding to the neighbor's
+ options field.
+
+ Bit 1, if set, indicates that the system will
+ operate on Type of Service metrics other than
+ TOS 0. If zero, the neighbor will ignore all
+ metrics except the TOS 0 metric.
+
+ Bit 2, if set, indicates that the system is
+ network multicast capable, i.e., that it
+ implements OSPF multicast routing."
+ ::= { rosMgmtOspfVirtNbrEntry 4 }
+
+ rosMgmtOspfVirtNbrState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (1),
+ attempt (2),
+ init (3),
+ twoWay (4),
+ exchangeStart (5),
+ exchange (6),
+ loading (7),
+ full (8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The state of the virtual neighbor relationship."
+ ::= { rosMgmtOspfVirtNbrEntry 5 }
+
+ rosMgmtOspfVirtNbrEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this virtual link has
+ changed its state or an error has occurred.
+
+ Discontinuities in the value of this counter can occur
+ at re-initialization of the management system, and at other
+ times as indicated by the value of ospfDiscontinuityTime."
+ ::= { rosMgmtOspfVirtNbrEntry 6 }
+
+ rosMgmtOspfVirtNbrLsRetransQLen OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current length of the retransmission
+ queue."
+ ::= { rosMgmtOspfVirtNbrEntry 7 }
+
+ rosMgmtOspfVirtNbrLessIf OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the out interface index of
+ this virtual neighbor."
+ ::= { rosMgmtOspfVirtNbrEntry 8 }
+
+ rosMgmtOspfVirtNbrMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ slave (1),
+ master (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the master-slave mode of
+ virtual neighbor. "
+ DEFVAL { slave }
+ ::= { rosMgmtOspfVirtNbrEntry 9 }
+
+-- The OSPF Area Aggregate Table
+--
+-- This table replaces the OSPF Area Summary Table, being an
+-- extension of that for CIDR routers.
+ rosMgmtOspfAreaAggregateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfAreaAggregateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+ DESCRIPTION
+ "The Area Aggregate Table acts as an adjunct
+ to the Area Table. It describes those address aggregates
+ that are configured to be propagated from an area.
+ Its purpose is to reduce the amount of information
+ that is known beyond an Area's borders.
+
+ It contains a set of IP address ranges
+ specified by an IP address/IP network mask pair.
+ For example, a class B address range of X.X.X.X
+ with a network mask of 255.255.0.0 includes all IP
+ addresses from X.X.0.0 to X.X.255.255.
+
+ Note that if ranges are configured such that one range
+ subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
+ and 10.1.0.0 mask 255.255.0.0),
+ the most specific match is the preferred one."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { rosMgmtOspfObjects 11 }
+
+ rosMgmtOspfAreaAggregateEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfAreaAggregateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A single area aggregate entry.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfAreaAggregateAreaID,
+ rosMgmtOspfAreaAggregateLsdbType,
+ rosMgmtOspfAreaAggregateNet,
+ rosMgmtOspfAreaAggregateMask }
+ ::= { rosMgmtOspfAreaAggregateTable 1 }
+
+ RosMgmtOspfAreaAggregateEntry ::=
+ SEQUENCE {
+ rosMgmtOspfAreaAggregateAreaID
+ AreaID,
+ rosMgmtOspfAreaAggregateLsdbType
+ INTEGER,
+ rosMgmtOspfAreaAggregateNet
+ IpAddress,
+ rosMgmtOspfAreaAggregateMask
+ IpAddress,
+ rosMgmtOspfAreaAggregateEffect
+ INTEGER,
+ rosMgmtOspfAreaAggregateStatus
+ RowStatus
+ }
+
+ rosMgmtOspfAreaAggregateAreaID OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The area within which the address aggregate is to be
+ found."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { rosMgmtOspfAreaAggregateEntry 1 }
+
+ rosMgmtOspfAreaAggregateLsdbType OBJECT-TYPE
+ SYNTAX INTEGER {
+ summaryLink (3),
+ nssaExternalLink (7)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The type of the address aggregate. This field
+ specifies the Lsdb type that this address
+ aggregate applies to."
+ REFERENCE
+ "OSPF Version 2, Appendix A.4.1 The Link State
+ Advertisement header"
+ ::= { rosMgmtOspfAreaAggregateEntry 2 }
+
+ rosMgmtOspfAreaAggregateNet OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IP address of the net or subnet indicated
+ by the range."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { rosMgmtOspfAreaAggregateEntry 3 }
+
+ rosMgmtOspfAreaAggregateMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The subnet mask that pertains to the net or
+ subnet."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { rosMgmtOspfAreaAggregateEntry 4 }
+
+ rosMgmtOspfAreaAggregateEffect OBJECT-TYPE
+ SYNTAX INTEGER {
+ advertiseMatching (1),
+ doNotAdvertiseMatching (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Subnets subsumed by ranges either trigger the
+ advertisement of the indicated aggregate
+ (advertiseMatching) or result in the subnet's not
+ being advertised at all outside the area."
+ DEFVAL { advertiseMatching }
+ ::= { rosMgmtOspfAreaAggregateEntry 5 }
+
+ rosMgmtOspfAreaAggregateStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfAreaAggregateEntry 6 }
+
+-- The OSPF External Aggregate Table
+--
+ rosMgmtOspfExternalAggregateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfExternalAggregateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+ DESCRIPTION
+ "It contains a set of IP address ranges
+ specified by an IP address/IP network mask pair.
+ For example, a class B address range of X.X.X.X
+ with a network mask of 255.255.0.0 includes all IP
+ addresses from X.X.0.0 to X.X.255.255.
+
+ Note that if ranges are configured such that one range
+ subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
+ and 10.1.0.0 mask 255.255.0.0),
+ the most specific match is the preferred one."
+ ::= { rosMgmtOspfObjects 12 }
+
+ rosMgmtOspfExternalAggregateEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfExternalAggregateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A single external aggregate entry.
+
+ Information in this table is persistent and when this object
+ is written the entity SHOULD save the change to non-volatile
+ storage."
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfExternalAggregateNet,
+ rosMgmtOspfExternalAggregateMask }
+ ::= { rosMgmtOspfExternalAggregateTable 1 }
+
+ RosMgmtOspfExternalAggregateEntry ::=
+ SEQUENCE {
+ rosMgmtOspfExternalAggregateNet
+ IpAddress,
+ rosMgmtOspfExternalAggregateMask
+ IpAddress,
+ rosMgmtOspfExternalAggregateEffect
+ INTEGER,
+ rosMgmtOspfExternalAggregateCost
+ BigMetric,
+ rosMgmtOspfExternalAggregateStatus
+ RowStatus
+ }
+
+ rosMgmtOspfExternalAggregateNet OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IP address of the net or subnet indicated
+ by the range."
+ ::= { rosMgmtOspfExternalAggregateEntry 1 }
+
+ rosMgmtOspfExternalAggregateMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The subnet mask that pertains to the net or
+ subnet."
+ ::= { rosMgmtOspfExternalAggregateEntry 2 }
+
+ rosMgmtOspfExternalAggregateEffect OBJECT-TYPE
+ SYNTAX INTEGER {
+ doNotAdvertise (1),
+ advertise(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object controls the advertisement of external route summary."
+ DEFVAL { advertise }
+ ::= { rosMgmtOspfExternalAggregateEntry 3 }
+
+ rosMgmtOspfExternalAggregateCost OBJECT-TYPE
+ SYNTAX BigMetric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "It indicates the cost of aggregated external route, 16777215
+ represents the cost is not set, the metric of route while decided
+ by ospf itself according to the route type."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfExternalAggregateEntry 4 }
+
+ rosMgmtOspfExternalAggregateStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfExternalAggregateEntry 5 }
+
+--rosMgmtOspfLsdbTable
+--
+--The table define link state database
+ rosMgmtOspfLsdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+ DESCRIPTION
+ "The OSPF Process's link state database (LSDB).
+ The LSDB contains the link state advertisements
+ from throughout the areas that the device is attached to."
+ REFERENCE
+ "OSPF Version 2, Section 12 Link State Advertisements"
+ ::= { rosMgmtOspfObjects 13 }
+
+ rosMgmtOspfLsdbEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A single link state advertisement."
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfLsdbAreaId,
+ rosMgmtOspfLsdbType,
+ rosMgmtOspfLsdbLsId,
+ rosMgmtOspfLsdbRouterId }
+ ::= { rosMgmtOspfLsdbTable 1 }
+
+ RosMgmtOspfLsdbEntry ::=
+ SEQUENCE {
+ rosMgmtOspfLsdbAreaId
+ AreaID,
+ rosMgmtOspfLsdbType
+ INTEGER,
+ rosMgmtOspfLsdbLsId
+ IpAddress,
+ rosMgmtOspfLsdbRouterId
+ RouterID,
+ rosMgmtOspfLsdbSequence
+ Integer32,
+ rosMgmtOspfLsdbAge
+ Integer32,
+ rosMgmtOspfLsdbChecksum
+ Integer32,
+ rosMgmtOspfLsdbAdvertisement
+ OCTET STRING
+ }
+
+ rosMgmtOspfLsdbAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit identifier of the area from which
+ the LSA was received."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+
+ ::= { rosMgmtOspfLsdbEntry 1 }
+
+ rosMgmtOspfLsdbType OBJECT-TYPE
+ SYNTAX INTEGER {
+ routerLink (1),
+ networkLink (2),
+ summaryLink (3),
+ asSummaryLink (4),
+ asExternalLink (5), -- but see rosMgmtOspfAsLsdbTable
+ multicastLink (6),
+ nssaExternalLink (7),
+ linkOpaqueLink (9),
+ areaOpaqueLink (10),
+ asOpaqueLink (11)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the link state advertisement.
+ Each link state type has a separate advertisement
+ format.
+
+ Note: External link state advertisements are permitted
+ for backward compatibility, but should be displayed
+ in the rosMgmtOspfAsLsdbTable rather than here."
+ REFERENCE
+ "OSPF Version 2, Appendix A.4.1 The Link State
+ Advertisement header"
+ ::= { rosMgmtOspfLsdbEntry 2 }
+
+ rosMgmtOspfLsdbLsId OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Link State ID is an LS Type Specific field
+ containing either a Router ID or an IP address;
+ it identifies the piece of the routing domain
+ that is being described by the advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.4 Link State ID"
+ ::= { rosMgmtOspfLsdbEntry 3 }
+
+ rosMgmtOspfLsdbRouterId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS read-only
+ STATUS current
+
+ DESCRIPTION
+ "The 32-bit number that uniquely identifies the
+ originating router in the Autonomous System."
+ REFERENCE
+ "OSPF Version 2, Appendix C.1 Global parameters"
+ ::= { rosMgmtOspfLsdbEntry 4 }
+
+ rosMgmtOspfLsdbSequence OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sequence number field is a signed 32-bit
+ integer. It starts with the value '80000001'h,
+ or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+ Thus, a typical sequence number will be very negative.
+ It is used to detect old and duplicate Link State
+ Advertisements. The space of sequence numbers is linearly
+ ordered. The larger the sequence number, the more recent
+ the advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.6 LS sequence
+ number"
+ ::= { rosMgmtOspfLsdbEntry 5 }
+
+ rosMgmtOspfLsdbAge OBJECT-TYPE
+ SYNTAX Integer32 -- Should be 0..MaxAge, except when
+ -- doNotAge bit is set
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the age of the link state advertisement
+ in seconds."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.1 LS age"
+ ::= { rosMgmtOspfLsdbEntry 6 }
+
+ rosMgmtOspfLsdbChecksum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the checksum of the complete contents of
+ the advertisement, excepting the age field. The age field
+ is excepted so that an advertisement's age can be
+ incremented without updating the checksum. The checksum
+ used is the same that is used for ISO connectionless
+
+ datagrams; it is commonly referred to as the
+ Fletcher checksum."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.7 LS checksum"
+ ::= { rosMgmtOspfLsdbEntry 7 }
+
+ rosMgmtOspfLsdbAdvertisement OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The entire link state advertisement, including
+ its header.
+
+ Note that for variable length LSAs, SNMP agents
+ may not be able to return the largest string size."
+ REFERENCE
+ "OSPF Version 2, Section 12 Link State Advertisements"
+ ::= { rosMgmtOspfLsdbEntry 8 }
+
+--rosMgmtOspfAsLsdbTable
+--
+--OSPF Link State Database, External
+ rosMgmtOspfAsLsdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfAsLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPF Process's AS-scope LSA link state database.
+ The database contains the AS-scope Link State
+ Advertisements from throughout the areas that
+ the device is attached to.
+
+ This table is identical to the OSPF LSDB Table
+ in format, but contains only AS-scope Link State
+ Advertisements. The purpose is to allow AS-scope
+ LSAs to be displayed once for the router rather
+ than once in each non-stub area."
+ REFERENCE
+ "OSPF Version 2, Section 12 Link State
+ Advertisements"
+ ::= { rosMgmtOspfObjects 14 }
+
+ rosMgmtOspfAsLsdbEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfAsLsdbEntry
+
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A single link state advertisement."
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfAsLsdbType,
+ rosMgmtOspfAsLsdbLsId,
+ rosMgmtOspfAsLsdbRouterId }
+ ::= { rosMgmtOspfAsLsdbTable 1 }
+
+ RosMgmtOspfAsLsdbEntry ::=
+ SEQUENCE {
+ rosMgmtOspfAsLsdbType
+ INTEGER,
+ rosMgmtOspfAsLsdbLsId
+ IpAddress,
+ rosMgmtOspfAsLsdbRouterId
+ RouterID,
+ rosMgmtOspfAsLsdbSequence
+ Integer32,
+ rosMgmtOspfAsLsdbAge
+ Integer32,
+ rosMgmtOspfAsLsdbChecksum
+ Integer32,
+ rosMgmtOspfAsLsdbAdvertisement
+ OCTET STRING
+ }
+
+ rosMgmtOspfAsLsdbType OBJECT-TYPE
+ SYNTAX INTEGER { asExternalLink (5) }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The type of the link state advertisement.
+ Each link state type has a separate
+ advertisement format."
+ REFERENCE
+ "OSPF Version 2, Appendix A.4.1 The Link State
+ Advertisement header"
+ ::= { rosMgmtOspfAsLsdbEntry 1 }
+
+ rosMgmtOspfAsLsdbLsId OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Link State ID is an LS Type Specific field
+ containing either a Router ID or an IP address;
+
+ it identifies the piece of the routing domain
+ that is being described by the advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.4 Link State ID"
+ ::= { rosMgmtOspfAsLsdbEntry 2 }
+
+ rosMgmtOspfAsLsdbRouterId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The 32-bit number that uniquely identifies the
+ originating router in the Autonomous System."
+ REFERENCE
+ "OSPF Version 2, Appendix C.1 Global parameters"
+ ::= { rosMgmtOspfAsLsdbEntry 3 }
+
+ rosMgmtOspfAsLsdbSequence OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sequence number field is a signed 32-bit
+ integer. It starts with the value '80000001'h,
+ or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
+ Thus, a typical sequence number will be very negative.
+ It is used to detect old and duplicate link state
+ advertisements. The space of sequence numbers is linearly
+ ordered. The larger the sequence number, the more recent
+ the advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.6 LS sequence
+ number"
+ ::= { rosMgmtOspfAsLsdbEntry 4 }
+
+ rosMgmtOspfAsLsdbAge OBJECT-TYPE
+ SYNTAX Integer32 -- Should be 0..MaxAge, except when
+ -- doNotAge bit is set
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the age of the link state
+ advertisement in seconds."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.1 LS age"
+ ::= { rosMgmtOspfAsLsdbEntry 5 }
+
+ rosMgmtOspfAsLsdbChecksum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the checksum of the complete
+ contents of the advertisement, excepting the
+ age field. The age field is excepted so that
+ an advertisement's age can be incremented
+ without updating the checksum. The checksum
+ used is the same that is used for ISO
+ connectionless datagrams; it is commonly referred
+ to as the Fletcher checksum."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.7 LS checksum"
+ ::= { rosMgmtOspfAsLsdbEntry 6 }
+
+ rosMgmtOspfAsLsdbAdvertisement OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The entire link state advertisement, including
+ its header."
+ REFERENCE
+ "OSPF Version 2, Section 12 Link State
+ Advertisements.
+
+ Note that for variable length LSAs, SNMP agents
+ may not be able to return the largest string size."
+ ::= { rosMgmtOspfAsLsdbEntry 7 }
+
+--rosMgmtOspfAreaLsaCountTable
+--
+--OSPF Area LSA Counter Table
+ rosMgmtOspfAreaLsaCountTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfAreaLsaCountEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table maintains per-area, per-LSA-type counters"
+ ::= { rosMgmtOspfObjects 15 }
+
+ rosMgmtOspfAreaLsaCountEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfAreaLsaCountEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry with a number of link advertisements
+ of a given type for a given area."
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfAreaLsaCountAreaId,
+ rosMgmtOspfAreaLsaCountLsaType }
+ ::= { rosMgmtOspfAreaLsaCountTable 1 }
+
+ RosMgmtOspfAreaLsaCountEntry ::=
+ SEQUENCE {
+ rosMgmtOspfAreaLsaCountAreaId
+ AreaID,
+ rosMgmtOspfAreaLsaCountLsaType
+ INTEGER,
+ rosMgmtOspfAreaLsaCountNumber
+ Gauge32
+ }
+
+ rosMgmtOspfAreaLsaCountAreaId OBJECT-TYPE
+ SYNTAX AreaID
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entry Area ID."
+ ::= { rosMgmtOspfAreaLsaCountEntry 1 }
+
+ rosMgmtOspfAreaLsaCountLsaType OBJECT-TYPE
+ SYNTAX INTEGER {
+ routerLink (1),
+ networkLink (2),
+ summaryLink (3),
+ asSummaryLink (4),
+ nssaExternalLink (7),
+ linkOpaqueLink (9),
+ areaOpaqueLink (10)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entry LSA type."
+ ::= { rosMgmtOspfAreaLsaCountEntry 2 }
+
+ rosMgmtOspfAreaLsaCountNumber OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of LSAs of a given type for a given area."
+ ::= { rosMgmtOspfAreaLsaCountEntry 3 }
+
+-- rosMgmtOspfRedistributeTable
+--
+ rosMgmtOspfRedistributeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfRedistributeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Import external route to ospf protocol."
+ ::= { rosMgmtOspfObjects 16 }
+
+ rosMgmtOspfRedistributeEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfRedistributeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the rosMgmtOspfRedistributeTable"
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfRedistributeProtocol,
+ rosMgmtOspfRedistributeProcessId }
+ ::= { rosMgmtOspfRedistributeTable 1 }
+
+ RosMgmtOspfRedistributeEntry ::=
+ SEQUENCE {
+ rosMgmtOspfRedistributeProtocol
+ INTEGER,
+ rosMgmtOspfRedistributeProcessId
+ ProcessID,
+ rosMgmtOspfRedistributeCost
+ BigMetric,
+ rosMgmtOspfRedistributeType
+ INTEGER,
+ rosMgmtOspfRedistributeStatus
+ RowStatus,
+ rosMgmtOspfRedistributeRouteMapName
+ OCTET STRING,
+ rosMgmtOspfRedistributeTag
+ Unsigned32
+ }
+
+ rosMgmtOspfRedistributeProtocol OBJECT-TYPE
+ SYNTAX INTEGER { -- RFC1213 route proto define
+ other(1), -- none of the following
+
+ -- non-protocol information,
+ -- e.g., manually configured
+ local(2), -- entries
+
+ -- set via a network
+ netmgmt(3), -- management protocol
+
+ -- obtained via ICMP,
+ icmp(4), -- e.g., Redirect
+
+ -- the remaining values are
+ -- all gateway routing
+ -- protocols
+ egp(5),
+ ggp(6),
+ hello(7),
+ rip(8),
+ isis(9),
+ esis(10),
+ ciscoIgrp(11),
+ bbnSpfIgp(12),
+ ospf(13),
+ bgp(14)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Route protocol to be redistributed."
+ ::= { rosMgmtOspfRedistributeEntry 1 }
+
+ rosMgmtOspfRedistributeProcessId OBJECT-TYPE
+ SYNTAX ProcessID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Process id of redistributed route protocol, only support ospf."
+ ::= { rosMgmtOspfRedistributeEntry 2 }
+
+ rosMgmtOspfRedistributeCost OBJECT-TYPE
+ SYNTAX BigMetric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "It indicates the cost of redistributed route, 16777215 represents
+ the cost is not set, the metric of route while decided by
+ ospf itself according to the route type."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfRedistributeEntry 3 }
+
+ rosMgmtOspfRedistributeType OBJECT-TYPE
+ SYNTAX INTEGER { e1(1),e2(2) }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of external route."
+ DEFVAL { e2 }
+ ::= { rosMgmtOspfRedistributeEntry 4 }
+
+ rosMgmtOspfRedistributeStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfRedistributeEntry 5 }
+ rosMgmtOspfRedistributeRouteMapName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specify a route-map."
+ ::= { rosMgmtOspfRedistributeEntry 6 }
+
+ rosMgmtOspfRedistributeTag OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Set tag of route."
+ ::= { rosMgmtOspfRedistributeEntry 7 }
+
+--rosMgmtOspfDefaultInfoTable
+--
+ rosMgmtOspfDefaultInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfDefaultInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table generate or delete the default route."
+ ::= { rosMgmtOspfObjects 17 }
+
+ rosMgmtOspfDefaultInfoEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfDefaultInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the rosMgmtOspfDefaultInfoTable"
+ INDEX { rosMgmtOspfProcessId }
+ ::= { rosMgmtOspfDefaultInfoTable 1 }
+
+ RosMgmtOspfDefaultInfoEntry ::=
+ SEQUENCE {
+ rosMgmtOspfDefaultInfoAlways
+ TruthValue,
+ rosMgmtOspfDefaultInfoCost
+ BigMetric,
+ rosMgmtOspfDefaultInfoType
+ INTEGER,
+ rosMgmtOspfDefaultInfoStatus
+ RowStatus
+ }
+
+ rosMgmtOspfDefaultInfoAlways OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Whether always inform default route."
+ DEFVAL { false }
+ ::= { rosMgmtOspfDefaultInfoEntry 1 }
+
+ rosMgmtOspfDefaultInfoCost OBJECT-TYPE
+ SYNTAX BigMetric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "It indicates the default cost of route, 16777215 represents
+ the default cost is not set, the metric of route while decided by
+ ospf itself according to the route type."
+ DEFVAL { 1 }
+ ::= { rosMgmtOspfDefaultInfoEntry 2 }
+
+ rosMgmtOspfDefaultInfoType OBJECT-TYPE
+ SYNTAX INTEGER { e1(1),e2(2) }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "It indicates the type of default route."
+ DEFVAL { e2 }
+ ::= { rosMgmtOspfDefaultInfoEntry 3 }
+
+ rosMgmtOspfDefaultInfoStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfDefaultInfoEntry 4 }
+
+-- rosMgmtOspfPacketIoStatisTable
+--
+ rosMgmtOspfPacketIoStatisTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfPacketIoStatisEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table is used to storage all kinds of
+ input and output packet statistical information of
+ OSPF process."
+ ::= { rosMgmtOspfObjects 18 }
+
+ rosMgmtOspfPacketIoStatisEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfPacketIoStatisEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the rosMgmtOspfPacketIoStatisTable"
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfPacketIoStatisIoType,
+ rosMgmtOspfPacketIoStatisPktType }
+ ::= { rosMgmtOspfPacketIoStatisTable 1 }
+
+ RosMgmtOspfPacketIoStatisEntry ::=
+ SEQUENCE {
+ rosMgmtOspfPacketIoStatisIoType
+ INTEGER,
+ rosMgmtOspfPacketIoStatisPktType
+ INTEGER,
+ rosMgmtOspfPacketIoStatisNumber
+ Integer32
+ }
+
+ rosMgmtOspfPacketIoStatisIoType OBJECT-TYPE
+ SYNTAX INTEGER {
+ input (1),
+ output (2)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the IO direction of
+ packet."
+ ::= { rosMgmtOspfPacketIoStatisEntry 1 }
+
+ rosMgmtOspfPacketIoStatisPktType OBJECT-TYPE
+ SYNTAX INTEGER {
+ hello (1),
+ dbDescript (2),
+ lsReq (3),
+ lsUpdate (4),
+ lsAck (5)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the type of
+ OSPF packet."
+ ::= { rosMgmtOspfPacketIoStatisEntry 2 }
+
+ rosMgmtOspfPacketIoStatisNumber OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number indicates the number of specified type of
+ packets on input or output direction."
+ ::= { rosMgmtOspfPacketIoStatisEntry 3 }
+
+-- rosMgmtOspfRouteTable
+--
+ rosMgmtOspfRouteTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table is used to storage OSPF calculation of routing table."
+ ::= { rosMgmtOspfObjects 19 }
+
+ rosMgmtOspfRouteEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the rosMgmtOspfRouteTable"
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfRouteDest,
+ rosMgmtOspfRouteMask,
+ rosMgmtOspfRouteType }
+ ::= { rosMgmtOspfRouteTable 1 }
+
+ RosMgmtOspfRouteEntry ::=
+ SEQUENCE {
+ rosMgmtOspfRouteDest
+ IpAddress,
+ rosMgmtOspfRouteMask
+ IpAddress,
+ rosMgmtOspfRouteType
+ Integer32,
+ rosMgmtOspfRouteLsType
+ INTEGER,
+ rosMgmtOspfRouteMetric
+ Integer32,
+ rosMgmtOspfRouteNextHop
+ IpAddress,
+ rosMgmtOspfRouteAdvRtr
+ IpAddress,
+ rosMgmtOspfRouteArea
+ Integer32
+ }
+
+ rosMgmtOspfRouteDest OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the destination address of
+ an ospf route."
+ ::= { rosMgmtOspfRouteEntry 1 }
+
+ rosMgmtOspfRouteMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the mask of
+ an ospf route."
+ ::= { rosMgmtOspfRouteEntry 2 }
+
+ rosMgmtOspfRouteType OBJECT-TYPE
+ SYNTAX Integer32 (1..'37'h)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "It indicates the type of an ospf route.
+ The hige 8 bits represents the ospf route type.
+ Value 1, represents the route is a ROUTER route,
+ whith is to a destined router.
+ Value 2, is for a NETWORK route, most caculated
+ ospf route is NETWORK route.
+ Value 3, represents the route is to be DISCARDed resently.
+
+ The low 8 bits represents the ospf route path type.
+ Value 1, represents the route path is a intra area path,
+ Value 2, represents the route path is a inter area path,
+ Value 3, represents the route path is a type1 external path,
+ Value 4, represents the route path is a type2 external path"
+ ::= { rosMgmtOspfRouteEntry 3 }
+
+ rosMgmtOspfRouteLsType OBJECT-TYPE
+ SYNTAX INTEGER {
+ stub (0),
+ routerLink (1),
+ networkLink (2),
+ summaryLink (3),
+ asSummaryLink (4),
+ asExternalLink (5),
+ multicastLink (6),
+ nssaExternalLink (7),
+ areaOpaqueLink (10)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the LSA type of
+ a router."
+ ::= { rosMgmtOspfRouteEntry 4 }
+
+ rosMgmtOspfRouteMetric OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the metric of
+ an ospf route. "
+ ::= { rosMgmtOspfRouteEntry 5 }
+
+ rosMgmtOspfRouteNextHop OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the nexthop address of
+ an ospf route."
+ ::= { rosMgmtOspfRouteEntry 6 }
+
+ rosMgmtOspfRouteAdvRtr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the advertising router of
+ an ospf route."
+ ::= { rosMgmtOspfRouteEntry 7 }
+
+ rosMgmtOspfRouteArea OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the ccmputing area of
+ an ospf route."
+ ::= { rosMgmtOspfRouteEntry 8 }
+
+-- rosMgmtOspfBdrRouteTable
+--
+ rosMgmtOspfBdrRouteTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfBdrRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table is used to storage the imformation of boder router."
+ ::= { rosMgmtOspfObjects 20 }
+
+ rosMgmtOspfBdrRouteEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfBdrRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the rosMgmtOspfBdrRouteTable"
+ INDEX { rosMgmtOspfProcessId,
+ rosMgmtOspfBdrRouteRtrType,
+ rosMgmtOspfBdrRouteArea,
+ rosMgmtOspfBdrRouteDest,
+ rosMgmtOspfBdrRouteNextHop }
+ ::= { rosMgmtOspfBdrRouteTable 1 }
+
+ RosMgmtOspfBdrRouteEntry ::=
+ SEQUENCE {
+ rosMgmtOspfBdrRouteRtrType
+ Integer32,
+ rosMgmtOspfBdrRouteArea
+ IpAddress,
+ rosMgmtOspfBdrRouteDest
+ IpAddress,
+ rosMgmtOspfBdrRouteNextHop
+ IpAddress,
+ rosMgmtOspfBdrRouteLsType
+ INTEGER,
+ rosMgmtOspfBdrRouteMetric
+ Integer32
+ }
+
+ rosMgmtOspfBdrRouteRtrType OBJECT-TYPE
+ SYNTAX Integer32 (1..'77'h)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "It indicates the type of an ospf router.
+ The hige 8 bits is a bit mask corresponding to
+ the ospf router type.
+ Bit 1, if set, indicates that the router is an ABR.
+ Bit 2, if set, indicates that the router is an ASBR..
+ Bit 3, if set, indicates that the router has a VLINK in this area.
+ Bit 4, if set, indicates that the routers always translates Type-7.
+ Bit 5, if set, indicates that it is a shortcut-ABR specific flag.
+
+ The low 8 bits represents the route path type to this router.
+ Value 1, represents the route path is a intra area path,
+ Value 2, represents the route path is a inter area path,
+ Value 3, represents the route path is a type1 external path,
+ Value 4, represents the route path is a type2 external path"
+ ::= { rosMgmtOspfBdrRouteEntry 1 }
+
+ rosMgmtOspfBdrRouteArea OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the area of
+ a boder router."
+ ::= { rosMgmtOspfBdrRouteEntry 2 }
+
+ rosMgmtOspfBdrRouteDest OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the boder router by
+ it's router id."
+ ::= { rosMgmtOspfBdrRouteEntry 3 }
+
+ rosMgmtOspfBdrRouteNextHop OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IIt has been used to describe the nexthop router to
+ reach a boder router."
+ ::= { rosMgmtOspfBdrRouteEntry 4 }
+
+ rosMgmtOspfBdrRouteLsType OBJECT-TYPE
+ SYNTAX INTEGER {
+ routerLink (1),
+ networkLink (2),
+ summaryLink (3),
+ asSummaryLink (4),
+ asExternalLink (5),
+ multicastLink (6),
+ nssaExternalLink (7),
+ areaOpaqueLink (10)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the LSA type of
+ a boder router."
+ ::= { rosMgmtOspfBdrRouteEntry 5 }
+
+ rosMgmtOspfBdrRouteMetric OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "It has been used to describe the metric to
+ a boder router."
+ ::= { rosMgmtOspfBdrRouteEntry 6 }
+
+ rosMgmtOspfDistributeListGroup OBJECT IDENTIFIER ::= { rosMgmtOspfObjects 21}
+
+-- rosMgmtOspfDistributeListInTable
+--
+ rosMgmtOspfDistributeListInTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfDistributeListInEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table is used to config and check distribute-in policy."
+ ::= { rosMgmtOspfDistributeListGroup 1 }
+
+ rosMgmtOspfDistributeListInEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfDistributeListInEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the rosMgmtOspfDistributeListInTable"
+ INDEX { rosMgmtOspfProcessId }
+ ::= { rosMgmtOspfDistributeListInTable 1 }
+
+ RosMgmtOspfDistributeListInEntry ::=
+ SEQUENCE {
+ rosMgmtOspfDistrInIpPrefixListName
+ OCTET STRING,
+ rosMgmtOspfDistrInAclNum
+ Integer32,
+ rosMgmtOspfDistrInRowStatus
+ RowStatus
+ }
+
+ rosMgmtOspfDistrInIpPrefixListName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Filter incoming routing updates,the value of this
+ object indicates the name of an ip-prefix-list."
+ ::= { rosMgmtOspfDistributeListInEntry 1 }
+
+ rosMgmtOspfDistrInAclNum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Filter incoming routing updates by the IP ACL number of OSPF distribute-in policy,
+ -1 is a value to inditace no setting of acl."
+ ::= { rosMgmtOspfDistributeListInEntry 2 }
+
+ rosMgmtOspfDistrInRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,construction,
+ and destruction.The value of this object has no effect
+ on whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfDistributeListInEntry 3 }
+
+-- rosMgmtOspfDistributeListOutTable
+--
+ rosMgmtOspfDistributeListOutTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfDistributeListOutEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table is used to config and check distribute-out policy."
+ ::= { rosMgmtOspfDistributeListGroup 2 }
+
+ rosMgmtOspfDistributeListOutEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfDistributeListOutEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the rosMgmtOspfDistributeListOutTable"
+ INDEX { rosMgmtOspfProcessId }
+ ::= { rosMgmtOspfDistributeListOutTable 1 }
+
+ RosMgmtOspfDistributeListOutEntry ::=
+ SEQUENCE {
+ rosMgmtOspfDistrOutIpPrefixListName
+ OCTET STRING,
+ rosMgmtOspfDistrOutAclNum
+ Integer32,
+ rosMgmtOspfDistrOutRowStatus
+ RowStatus
+ }
+
+ rosMgmtOspfDistrOutIpPrefixListName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Filter outgoing routing updates,the value of this object
+ indicates the name of an ip-prefix-list."
+ ::= { rosMgmtOspfDistributeListOutEntry 1 }
+
+ rosMgmtOspfDistrOutAclNum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Filter incoming outgoing updates by the IP ACL number of OSPF distribute-out policy,
+ -1 is a value to inditace no setting of acl."
+ ::= { rosMgmtOspfDistributeListOutEntry 2 }
+
+ rosMgmtOspfDistrOutRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,construction,
+ and destruction. The value of this object has no effect
+ on whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfDistributeListOutEntry 3 }
+
+-- rosMgmtOspfDistributeListOutProtocolTable
+--
+ rosMgmtOspfDistributeListOutProtocolTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfDistributeListOutProtocolEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table is used to config and check distribute-out policy based on protocol."
+ ::= { rosMgmtOspfDistributeListGroup 3 }
+
+ rosMgmtOspfDistributeListOutProtocolEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfDistributeListOutProtocolEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the rosMgmtOspfDistributeListOutProtocolTable"
+ INDEX {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfDistrOutProtocol,
+ rosMgmtOspfDistrOutProcessId
+ }
+ ::= { rosMgmtOspfDistributeListOutProtocolTable 1 }
+
+ RosMgmtOspfDistributeListOutProtocolEntry ::=
+ SEQUENCE {
+ rosMgmtOspfDistrOutProtocol
+ INTEGER,
+ rosMgmtOspfDistrOutProcessId
+ ProcessID,
+ rosMgmtOspfDistrOutProIpPrefixListName
+ OCTET STRING,
+ rosMgmtOspfDistrOutProAclNum
+ Integer32,
+ rosMgmtOspfDistrOutProRowStatus
+ RowStatus
+ }
+
+ rosMgmtOspfDistrOutProtocol OBJECT-TYPE
+ SYNTAX INTEGER { -- RFC1213 route proto define
+ other(1), -- none of the following
+
+ -- non-protocol information,
+ -- e.g., manually configured
+ local(2), -- entries
+
+ -- set via a network
+ netmgmt(3), -- management protocol
+
+ -- obtained via ICMP,
+ icmp(4), -- e.g., Redirect
+
+ -- the remaining values are
+ -- all gateway routing
+ -- protocols
+ egp(5),
+ ggp(6),
+ hello(7),
+ rip(8),
+ isis(9),
+ esis(10),
+ ciscoIgrp(11),
+ bbnSpfIgp(12),
+ ospf(13),
+ bgp(14)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Redistributed route protocol."
+ ::= { rosMgmtOspfDistributeListOutProtocolEntry 1 }
+
+ rosMgmtOspfDistrOutProcessId OBJECT-TYPE
+ SYNTAX ProcessID
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Process id of redistributed route protocol, only support ospf."
+ ::= { rosMgmtOspfDistributeListOutProtocolEntry 2 }
+
+ rosMgmtOspfDistrOutProIpPrefixListName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Filtering outgoing updates based on imported protocol, the value
+ of this object indicates the name of an ip-prefix-list."
+ ::= { rosMgmtOspfDistributeListOutProtocolEntry 3 }
+
+ rosMgmtOspfDistrOutProAclNum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Filtering outgoing updates based on imported protocol, the value of this object
+ indicates the IP ACL number, -1 is a value to inditace no setting of acl."
+ ::= { rosMgmtOspfDistributeListOutProtocolEntry 4 }
+
+ rosMgmtOspfDistrOutProRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,construction,
+ and destruction.The value of this object has no effect
+ on whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfDistributeListOutProtocolEntry 5 }
+
+
+--rosMgmtOspfDNBitCheckDisableSummaryTable
+--
+ rosMgmtOspfDNBitCheckDisableSummaryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RosMgmtOspfDNBitCheckDisableSummaryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table check or set the operation of ND bit."
+ ::= { rosMgmtOspfObjects 22 }
+
+ rosMgmtOspfDNBitCheckDisableSummaryEntry OBJECT-TYPE
+ SYNTAX RosMgmtOspfDNBitCheckDisableSummaryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Define an entry in the RosMgmtOspfDNBitCheckDisableSummaryEntry"
+ INDEX {
+ rosMgmtOspfProcessId,
+ rosMgmtOspfDNBitCheckDisableSummaryRtrId
+ }
+ ::= { rosMgmtOspfDNBitCheckDisableSummaryTable 1 }
+
+ RosMgmtOspfDNBitCheckDisableSummaryEntry ::=
+ SEQUENCE {
+ rosMgmtOspfDNBitCheckDisableSummaryRtrId
+ RouterID,
+ rosMgmtOspfDNBitCheckDisableSummaryStatus
+ RowStatus
+ }
+
+ rosMgmtOspfDNBitCheckDisableSummaryRtrId OBJECT-TYPE
+ SYNTAX RouterID
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "It indicates the router-id of summary-lsa,which can be operated the DN bit separately.This node can only
+ be used for check operation"
+ ::= { rosMgmtOspfDNBitCheckDisableSummaryEntry 1 }
+
+ rosMgmtOspfDNBitCheckDisableSummaryStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction, and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { rosMgmtOspfDNBitCheckDisableSummaryEntry 2 }
+
+
+END
|