diff options
Diffstat (limited to 'MIBS/radlan/RADLAN-SNMP-MIB')
| -rw-r--r-- | MIBS/radlan/RADLAN-SNMP-MIB | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/MIBS/radlan/RADLAN-SNMP-MIB b/MIBS/radlan/RADLAN-SNMP-MIB new file mode 100644 index 0000000..2afe8c2 --- /dev/null +++ b/MIBS/radlan/RADLAN-SNMP-MIB @@ -0,0 +1,136 @@ +RADLAN-SNMP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + rnd FROM RADLAN-MIB + OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI + TEXTUAL-CONVENTION FROM SNMPv2-TC; + +rlSNMP MODULE-IDENTITY + LAST-UPDATED "0410200000Z" + ORGANIZATION "Radlan Computer Communications Ltd." + CONTACT-INFO + "radlan.com" + DESCRIPTION + "Private MIB module for SNMP support in Radlan devices." + REVISION "0410200000Z" + DESCRIPTION + "Initial version of this MIB." + ::= { rnd 98 } + +rlSNMPv3 OBJECT IDENTIFIER ::= { rlSNMP 1 } + +rlTargetParamsTestingLevel OBJECT-TYPE + SYNTAX INTEGER { + low(1), + high(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The level of the tests done when configuring an entry in the snmpTargetParamsTable." + ::= { rlSNMPv3 1 } + +rlNotifyFilterTestingLevel OBJECT-TYPE + SYNTAX INTEGER { + low(1), + high(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The level of the tests done when configuring an entry in the snmpNotifyFilterTable." + ::= { rlSNMPv3 2 } + +rlSnmpEngineID OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(5..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A variable for setting the router's local engineID value. + Setting this variable will effect the value of snmpEngineID. Setting this + variable to the value '00 00 00 00 00'H will cause snmpEngineID to get + an automatically created value based on the device basic MAC address. + This method of setting the agent's engineID is recommended for stand-alone + systems. Setting this variable to any other (valid) value will set snmpEngineID + to this value. Setting this variable to all 'ff'H or all zeros is not + allowed, with the exception of the value '00 00 00 00 00'H. + The last method is recommended for stackable system, in order for the + engineID to be unique within an administrative domain. + Setting this value (to a value different then the default value) + is required before configuring the usmUserTable. + Changing the value of this variable has 2 side-effects: + - All usmUserTable configured entries will be deleted. + - All snmpCommunityTable entries with snmpCommunityContextEngineID value + equal to old rlSnmpEngineID value, will be updated with the new + rlSnmpEngineID value." + DEFVAL { '0000000001'H } + ::= { rlSNMPv3 3 } + +rlSNMPDomains OBJECT IDENTIFIER ::= { rlSNMP 2 } + +rlSnmpUDPMridDomain OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The SNMPv2 over UDP transport domain, used when Multi-Instance Router + is supported (more than one MIR instance exist). + The corresponding transport address is of type RlSnmpUDPMridAddress." + ::= { rlSNMPDomains 1 } + +RlSnmpUDPMridAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1d.1d.1d.1d/2d/2d" + STATUS current + DESCRIPTION + "Represents the UDP address of NMS and the MRID through which it is + connected in order to access the agent: + octets contents encoding + 1-4 IP-address network-byte order + 5-6 UDP-port network-byte order + 7-8 MRID network-byte order + " + SYNTAX OCTET STRING (SIZE (8)) + +rlSnmpRequestMridTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlSnmpRequestMridEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for determining the Mrid for the current SNMP request." + ::= { rlSNMP 3 } + +rlSnmpRequestMridEntry OBJECT-TYPE + SYNTAX RlSnmpRequestMridEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " The row definition for this table." + INDEX { rlSnmpRequestManagedMrid } + ::= { rlSnmpRequestMridTable 1 } + +RlSnmpRequestMridEntry ::= SEQUENCE { + rlSnmpRequestManagedMrid INTEGER, + rlSnmpRequestMridStatus INTEGER } + +rlSnmpRequestManagedMrid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The router instance the NMS wants to manage in the current SNMP request. + The value of this object, when attaching a variable instance of the + rlSnmpRequestManagedMridTable to an SNMP request, will determine the + managed Mrid for this request. + It is important to mention that the variable insance must be attached + as the first variable in the PDU in order to influence all variables." + ::= { rlSnmpRequestMridEntry 1 } + +rlSnmpRequestMridStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of this entry." + ::= { rlSnmpRequestMridEntry 2 } + +END |