diff options
Diffstat (limited to 'MIBS/quanta/dot1xAdvanced.my')
| -rw-r--r-- | MIBS/quanta/dot1xAdvanced.my | 772 |
1 files changed, 772 insertions, 0 deletions
diff --git a/MIBS/quanta/dot1xAdvanced.my b/MIBS/quanta/dot1xAdvanced.my new file mode 100644 index 0000000..367ed9b --- /dev/null +++ b/MIBS/quanta/dot1xAdvanced.my @@ -0,0 +1,772 @@ +-- Dot1x Advanced Features MIB overview: +-- Dot1x Advanced Features MIB falls under lb6m MIB node of the private subtree. + +NETGEAR-DOT1X-ADVANCED-FEATURES-MIB DEFINITIONS ::= BEGIN + +-- Netgear Dot1x Advanced Features MIB +-- Copyright Netgear Inc (2003-2007) All rights reserved. + +-- This SNMP Management Information Specification +-- embodies Netgear Inc's confidential and proprietary +-- intellectual property. Netgear Inc retains all title +-- and ownership in the Specification including any revisions. + +-- This Specification is supplied "AS IS", Netgear Inc +-- makes no warranty, either expressed or implied, +-- as to the use, operation, condition, or performance of the +-- Specification. + + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + Unsigned32, TimeTicks FROM SNMPv2-SMI + dot1xPaePortNumber FROM IEEE8021-PAE-MIB + TEXTUAL-CONVENTION, + RowStatus,MacAddress,DateAndTime FROM SNMPv2-TC + DisplayString FROM RFC1213-MIB + lb6m FROM QUANTA-LB6M-REF-MIB; + + + fastPathdot1xAdvanced MODULE-IDENTITY + LAST-UPDATED "201101260000Z" -- 26 January 2011 12:00:00 GMT + ORGANIZATION "Netgear Inc" + CONTACT-INFO "" + + DESCRIPTION + "The Netgear Private MIB for FastPath Dot1x Advanced Features " + + -- Revision history. + REVISION + "201101260000Z" -- 26 January 2011 12:00:00 GMT + DESCRIPTION + "Postal address updated." + REVISION + "200705230000Z" -- 23 May 2007 12:00:00 GMT + DESCRIPTION + "Netgear branding related changes." + + ::= { lb6m 36 } + + +Dot1xPortControlMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The control values of the Authenticator PAE controlled + Port." + SYNTAX INTEGER { + forceUnauthorized(1), + auto(2), + forceAuthorized(3), + macBased(4) + } + +Dot1xSessionTerminationAction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The action to be taken on session termination ." + SYNTAX INTEGER { + default(1), + reauthenticate(2) + } + +agentDot1xEnhancementConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 1 } + + agentDot1xRadiusVlanAssignment OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable dot1x Vlan Assignment Support on the switch." + DEFVAL { disable } + ::= { agentDot1xEnhancementConfigGroup 1 } + + agentDot1xDynamicVlanCreationMode OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable dot1x dynamic vlan creation Support on the switch." + DEFVAL { disable } + ::= { agentDot1xEnhancementConfigGroup 2 } + + agentDot1xEapolFloodMode OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable dot1x eapol flooding mode on the switch." + DEFVAL { disable } + ::= { agentDot1xEnhancementConfigGroup 3 } + +--************************************************************************************** +-- agentDot1xPortConfigGroup -> Contains MIB objects configuring/displaying Dot1x Port details +-- and associated Functionality +-- +--************************************************************************************** + + agentDot1xPortConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 2 } + +-------------------------------------------------------------- +-- The Dot1x Enhanced Port Table +-------------------------------------------------------------- + + agentDot1xPortConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF AgentDot1xPortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table for dot1x enhanced Port details and associated functionality." + ::= { agentDot1xPortConfigGroup 1 } + + agentDot1xPortConfigEntry OBJECT-TYPE + SYNTAX AgentDot1xPortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Represents entry for port config table." + INDEX { dot1xPaePortNumber} + ::= {agentDot1xPortConfigTable 1 } + + AgentDot1xPortConfigEntry ::= SEQUENCE { + agentDot1xPortControlMode + Dot1xPortControlMode, + agentDot1xGuestVlanId + Unsigned32, + agentDot1xGuestVlanPeriod + Unsigned32, + agentDot1xUnauthenticatedVlan + Unsigned32, + agentDot1xMaxUsers + Unsigned32, + agentDot1xPortVlanAssigned + Unsigned32, + agentDot1xPortVlanAssignedReason + INTEGER, + agentDot1xPortSessionTimeout + Unsigned32, + agentDot1xPortTerminationAction + Dot1xSessionTerminationAction, + agentDot1xPortMABenabled + INTEGER, + agentDot1xPortMABenabledOperational + INTEGER + + } + + agentDot1xPortControlMode OBJECT-TYPE + SYNTAX Dot1xPortControlMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Dot1x port control mode of this port.The Port control mode . + The port control mode for this interface can take the following values , + force-unauthorized - the port is in unauthorized mode, + auto-Port based mode. If a client authenticates suscessfully, then the interface is authorized . + Otherwise, the port is in unauthorized mode. + If more than one clients are attached to the port , then only one client needs to authenticate to allow other clients access. + force-authorized - The port is placed in authorized mode + macBased - If more than one client is attached to the port, then each client needs to authenticate separately. + This object depcreates dot1xAuthAuthControlledPortControl object in IEEE8021-PAE-MIB" + DEFVAL {auto} + ::= { agentDot1xPortConfigEntry 1} + + agentDot1xGuestVlanId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the Guest Vlan of the port. A port will + be moved to its Guest Vlan if no client sucessfully + authenticates on that port for the Guest Vlan Period. + A value of zero indicates no Guest Vlan is configured for the interface." + DEFVAL {0} + ::= { agentDot1xPortConfigEntry 2} + + agentDot1xGuestVlanPeriod OBJECT-TYPE + SYNTAX Unsigned32 (1..300) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value, in seconds, of the guestVlanPeriod constant + currently in use for Guest Vlan Assignment for the + port ." + DEFVAL { 90 } + ::= { agentDot1xPortConfigEntry 3 } + + + agentDot1xUnauthenticatedVlan OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the Unauthenticated Vlan of the port. A port will + be moved to its unauthenticated Vlan if the client authenticates unsucessfully + on that port . + A value of zero indicates no Unauthenticated Vlan is configured for the port. " + DEFVAL {0} + ::= { agentDot1xPortConfigEntry 4} + + agentDot1xMaxUsers OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " Specifies the maximum users or clients that can authenticate on this port when the port control mode is macBased. " + ::= { agentDot1xPortConfigEntry 5} + + agentDot1xPortVlanAssigned OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " Specifies the vlan the port is assigned to by Dot1x . + Only relevant if the port control mode of the port is auto. " + DEFVAL {0} + ::= { agentDot1xPortConfigEntry 6} + + agentDot1xPortVlanAssignedReason OBJECT-TYPE + SYNTAX INTEGER { + default(1), + radius(2), + unauthenticatedVlan(3), + guestVlan(4), + voiceVlan(5), + monitorVlan(6), + notAssigned(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " Reason the port is assigned to the vlan specified by agentDot1xPortVlanAssigned . + Only relevant if the port control mode of the port is auto. " + DEFVAL {5} + ::= { agentDot1xPortConfigEntry 7} + + agentDot1xPortSessionTimeout OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " Specifies the session timeout value assigned by the Radius server for this port . + Only relevant if the port control mode of the port is auto. " + ::= { agentDot1xPortConfigEntry 8} + + agentDot1xPortTerminationAction OBJECT-TYPE + SYNTAX Dot1xSessionTerminationAction + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " Specifies the session termination action assigned by the Radius Server .This is the action taken when the session times out . + Only relevant if the port control mode of the port is auto. " + DEFVAL {1} + ::= { agentDot1xPortConfigEntry 9} + + agentDot1xPortMABenabled OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " Specifies if Mac-based bypass authentication is configured for the port. " + DEFVAL {2} + ::= { agentDot1xPortConfigEntry 10} + + agentDot1xPortMABenabledOperational OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " Displays the operational value of the Mac-based authentication bypass mode (MAB) on the port. " + DEFVAL {2} + ::= { agentDot1xPortConfigEntry 11} + +--************************************************************************************** +-- agentDot1xClientConfigGroup -> Contains MIB objects displaying Dot1x Client details and +-- associated Functionality +-- +--************************************************************************************** + + agentDot1xClientConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 3 } + + agentDot1xClientConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF AgentDot1xClientConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table for dot1x Client details and associated functionality." + ::= { agentDot1xClientConfigGroup 1 } + + agentDot1xClientConfigEntry OBJECT-TYPE + SYNTAX AgentDot1xClientConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Represents entry for port config table." + INDEX { agentDot1xClientMacAddress} + ::= {agentDot1xClientConfigTable 1 } + + AgentDot1xClientConfigEntry ::= SEQUENCE { + agentDot1xClientMacAddress + MacAddress, + agentDot1xLogicalPort + Unsigned32, + agentDot1xInterface + Unsigned32, + agentDot1xClientAuthPAEstate + INTEGER, + agentDot1xClientBackendState + INTEGER, + agentDot1xClientUserName + DisplayString, + agentDot1xClientSessionTime + Unsigned32, + agentDot1xClientFilterID + DisplayString, + agentDot1xClientVlanAssigned + Unsigned32, + agentDot1xClientVlanAssignedReason + INTEGER, + agentDot1xClientSessionTimeout + Unsigned32, + agentDot1xClientTerminationAction + Dot1xSessionTerminationAction + } + + agentDot1xClientMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the client MAC address of the client. " + ::= { agentDot1xClientConfigEntry 1} + + agentDot1xLogicalPort OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the client MAC address of the client . " + ::= { agentDot1xClientConfigEntry 2} + + agentDot1xInterface OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the physical interface to which the client is attached . " + ::= { agentDot1xClientConfigEntry 3} + + agentDot1xClientAuthPAEstate OBJECT-TYPE + SYNTAX INTEGER { + initialize(1), + disconnected(2), + connecting(3), + authenticating(4), + authenticated(5), + aborting(6), + held(7), + forceAuth(8), + forceUnauth(9) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current value of the Authenticator PAE state + machine for the client." + ::={ agentDot1xClientConfigEntry 4} + + agentDot1xClientBackendState OBJECT-TYPE + SYNTAX INTEGER { + request(1), + response(2), + success(3), + fail(4), + timeout(5), + idle(6), + initialize(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of the Backend Authentication + state machine." + ::={ agentDot1xClientConfigEntry 5} + + agentDot1xClientUserName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the username with which the client is authenticated to the Radius server . + This value is only valid when the client is in authenticated state. " + ::= { agentDot1xClientConfigEntry 6} + + agentDot1xClientSessionTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the time elapsed in seconds since the client was authenticated in this session. + This value is only valid when the client is in authenticated state. " + ::= { agentDot1xClientConfigEntry 7} + + agentDot1xClientFilterID OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the Filter ID or Diffserv Policy name to be applied to the session . + This vlaue is populated only if it has been assigned by the RADIUS server. + This value is only valid when the client is in authenticated state." + ::= { agentDot1xClientConfigEntry 8} + + agentDot1xClientVlanAssigned OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the vlan the client is associated with by Dot1x . + This value is only valid when the client is in authenticated state." + ::= { agentDot1xClientConfigEntry 9} + + agentDot1xClientVlanAssignedReason OBJECT-TYPE + SYNTAX INTEGER { + default(1), + radius(2), + unauthenticatedVlan(3), + monitorVlan(6), + invalid(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " Reason the client is associated to the vlan specified by agentDot1xClientVlanAssigned . + This value is only valid when the client is in authenticated state." + ::= { agentDot1xClientConfigEntry 10} + + agentDot1xClientSessionTimeout OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the session time remaining for the client if assigned by the Radius server . + A value of 0 indicates that no session timeout was assigned by the RADIUS server. + This value is only valid when the client is in authenticated state. " + ::= { agentDot1xClientConfigEntry 11} + + agentDot1xClientTerminationAction OBJECT-TYPE + SYNTAX Dot1xSessionTerminationAction + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the session termination action assigned by the Radius Server . + This is the action taken when the session times out . + This value is only valid when the client is in authenticated state. " + ::= { agentDot1xClientConfigEntry 12} + + + +--************************************************************************************** +-- agentDot1xMonitorModeConfigGroup -> Contains MIB objects configuring/displaying Dot1x +-- Monitor Mode details and associated Functionality +-- +--************************************************************************************** + agentDot1xMonitorModeConfigGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 4 } + + agentDot1xMonitorModeEnabled OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Enable/Disable Dot1x Monitor mode + Support on the switch." + DEFVAL { disable } + ::= { agentDot1xMonitorModeConfigGroup 1 } + + agentDot1xMonitorModeClients OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Retrieves the number of clients that got + authenticated by Monitor mode globally." + ::= { agentDot1xMonitorModeConfigGroup 2 } + + agentDot1xNonMonitorModeClients OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Retrieves the number of clients that are granted access by Dot1x with no monitor mode enabled." + ::= { agentDot1xMonitorModeConfigGroup 3 } + + +--************************************************************************************** +-- agentDot1xMonitorModeConfigGroup -> Contains MIB objects configuring/displaying Dot1x +-- Monitor Mode details and associated Functionality +-- +--************************************************************************************** + agentDot1xAuthHistoryResultsGroup OBJECT IDENTIFIER ::= { fastPathdot1xAdvanced 5 } + + agentDot1xPortAuthHistoryResultTable OBJECT-TYPE + SYNTAX SEQUENCE OF AgentDot1xPortAuthHistoryResultEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table to display the dot1x monitor mode results." + ::= { agentDot1xAuthHistoryResultsGroup 1 } + + agentDot1xPortAuthHistoryResultEntry OBJECT-TYPE + SYNTAX AgentDot1xPortAuthHistoryResultEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Represents Dot1x Authentication results for a Dot1x Authentication History table." + INDEX { agentDot1xAuthHistoryResultIfaceIndex, + agentDot1xAuthHistoryResultIndex} + ::= {agentDot1xPortAuthHistoryResultTable 1 } + + AgentDot1xPortAuthHistoryResultEntry ::= SEQUENCE { + agentDot1xAuthHistoryResultIfaceIndex Unsigned32, + agentDot1xAuthHistoryResultIndex Unsigned32, + agentDot1xAuthHistoryResultTimeStamp DateAndTime, + agentDot1xAuthHistoryResultAge TimeTicks, + agentDot1xAuthHistoryResultMacAddress MacAddress, + agentDot1xAuthHistoryResultVlanId Unsigned32, + agentDot1xAuthHistoryResultAuthStatus INTEGER, + agentDot1xAuthHistoryResultAccessStatus INTEGER, + agentDot1xAuthHistoryResultFilterID DisplayString, + agentDot1xAuthHistoryResultVlanAssigned Unsigned32, + agentDot1xAuthHistoryResultVlanAssignedType INTEGER, + agentDot1xAuthHistoryResultReasonCode INTEGER + } + + agentDot1xAuthHistoryResultIfaceIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the physical Bridge Port on which dot1x Auth event + might be received." + ::= { agentDot1xPortAuthHistoryResultEntry 1 } + + agentDot1xAuthHistoryResultIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Reference to the Dot1x Authentication history table maintained." + ::= { agentDot1xPortAuthHistoryResultEntry 2 } + + agentDot1xAuthHistoryResultTimeStamp OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the exact time of Dot1x Authentication + event information occurred maintained in the + history table." + ::= { agentDot1xPortAuthHistoryResultEntry 3 } + + agentDot1xAuthHistoryResultAge OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time since the authentication entry was added to the history table. It is displayed in days, hours, minutes, and seconds." + ::= { agentDot1xPortAuthHistoryResultEntry 4 } + + agentDot1xAuthHistoryResultMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the client MAC Address maintained in + the Dot1x Authentication history table." + ::= { agentDot1xPortAuthHistoryResultEntry 5 } + + agentDot1xAuthHistoryResultVlanId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the VLANID maintained in the history + table. It is the VLANID which is failed to + associate to the port during authentication process. + The VLANID is identified distinctly by the Reason + code for the respective entry. Valid only when the + reason code is set to 13 (VLAN assignment failure). + In all the other cases, VLANID is set to 0. " + ::= { agentDot1xPortAuthHistoryResultEntry 6 } + + agentDot1xAuthHistoryResultAuthStatus OBJECT-TYPE + SYNTAX INTEGER { + success(1), + failure(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the Dot1x Authentication status (Success or Failure) for the Dot1x Authentication event takes place. " + ::= { agentDot1xPortAuthHistoryResultEntry 7 } + + agentDot1xAuthHistoryResultAccessStatus OBJECT-TYPE + SYNTAX INTEGER { + granted(1), + denied(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " Authentication access status indicates the exact status of the dot1x client. + Granted means the client is allowed access to the network using dot1x or monitor mode. + Denied means the client is not allowed access to the network." + ::= { agentDot1xPortAuthHistoryResultEntry 8 } + + agentDot1xAuthHistoryResultFilterID OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the Filter ID or Diffserv Policy name assigned by the RADIUS server. + This value is only valid when the client is in authenticated state." + ::= { agentDot1xPortAuthHistoryResultEntry 9 } + + agentDot1xAuthHistoryResultVlanAssigned OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the VLANID maintained in the history + table (It is the VLANID Assigned to a Port or Client authenticate)." + ::= { agentDot1xPortAuthHistoryResultEntry 10 } + + agentDot1xAuthHistoryResultVlanAssignedType OBJECT-TYPE + SYNTAX INTEGER { + default(1), + radius(2), + unauthenticatedVlan(3), + guestVlan(4), + voiceVlan(5), + monitorVlan(6), + notAssigned(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the VLAN Assigned Reason maintained in the history + table." + ::= { agentDot1xPortAuthHistoryResultEntry 11 } + + + agentDot1xAuthHistoryResultReasonCode OBJECT-TYPE + SYNTAX INTEGER { + supplicant-timeout(1), + eapol-timeout(2), + radius-request-timeout(3), + radius-auth-failure(4), + radius-auth-comm-failure(5), + radius-challenge-process-invalid-nas-port(6), + radius-challenge-process-wrong-eap-msg(7), + radius-request-send-msg-error(8), + radius-accept-process-invalid-nas-port(9), + radius-accept-process-wrong-eap-msg(10), + radius-accept-filter-assignment-failure(11), + radius-accept-diffserv-not-present(12), + radius-accept-vlan-assignment-failure(13), + vlan-assignment-feature-not-enabled(14), + radius-success(15), + local-auth-user-not-found(16), + local-auth-user-no-access(17), + local-auth-md5-validation-failure(18), + local-auth-invalid-eap-type(19), + local-failure(20), + local-success(21), + radius-invalid-radius-status(22), + guest-vlan-timer-expiry(23), + undefined-auth-method(24), + reject-auth-method(25), + invalid-auth-method(26), + auth-method-not-configured(27), + unauth-vlan-not-created(28), + guest-vlan-not-created(29), + radius-accept-invalid-vlan-failure(30) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Specifies the Dot1x authentication reason + refered by the result index on a port." + ::= { agentDot1xPortAuthHistoryResultEntry 12 } + + + agentDot1xAuthHistoryResultsClear OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When set to enable(1), all Dot1x Authentication History information will be reset." + DEFVAL { disable } + ::= { agentDot1xAuthHistoryResultsGroup 2 } + + --************************************************************************************** + -- agentDot1xPortAuthHistoryResultClearTable + -- + --************************************************************************************** + + agentDot1xPortAuthHistoryResultClearTable OBJECT-TYPE + SYNTAX SEQUENCE OF AgentDot1xPortAuthHistoryResultClearEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table to clear the dot1x monitor mode results per interface." + ::= { agentDot1xAuthHistoryResultsGroup 3 } + + agentDot1xPortAuthHistoryResultClearEntry OBJECT-TYPE + SYNTAX AgentDot1xPortAuthHistoryResultClearEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Represents to clear the Dot1x Authentication results for a Dot1x Authentication History table." + INDEX { agentDot1xAuthHistoryResultIfIndex } + ::= {agentDot1xPortAuthHistoryResultClearTable 1 } + + AgentDot1xPortAuthHistoryResultClearEntry ::= SEQUENCE { + agentDot1xAuthHistoryResultIfIndex Unsigned32, + agentDot1xPortAuthHistoryResultsClear INTEGER + } + + agentDot1xAuthHistoryResultIfIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the physical Bridge Port on which dot1x Auth event + might be received." + ::= { agentDot1xPortAuthHistoryResultClearEntry 1 } + + + agentDot1xPortAuthHistoryResultsClear OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When set to enable(1), all Dot1x Authentication History information for + the given port will be reset. The value is write-only. Attempt to read + will return disable(2)." + DEFVAL { disable } + ::= { agentDot1xPortAuthHistoryResultClearEntry 2 } + + +END |