diff options
Diffstat (limited to 'MIBS/openaccess')
| -rw-r--r-- | MIBS/openaccess/OA-SMI | 65 | ||||
| -rw-r--r-- | MIBS/openaccess/OACOMMON-MIB | 778 |
2 files changed, 843 insertions, 0 deletions
diff --git a/MIBS/openaccess/OA-SMI b/MIBS/openaccess/OA-SMI new file mode 100644 index 0000000..da01d1e --- /dev/null +++ b/MIBS/openaccess/OA-SMI @@ -0,0 +1,65 @@ +-- *****************************************************************
+-- OA-SMI.my: Open Access Communications Structure of Management Information
+--
+-- July 2010
+--
+-- Copyright (c) 2010 by Open Access Pty Ltd
+-- All rights reserved.
+--
+-- *****************************************************************
+--
+
+OA-SMI DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-IDENTITY,
+ enterprises
+ FROM SNMPv2-SMI;
+
+oa MODULE-IDENTITY
+ LAST-UPDATED "9910140000Z"
+ ORGANIZATION "Open Access Pty Ltd"
+ CONTACT-INFO
+ " Open Access
+ Customer Service
+
+ Postal: PO Box 61 North Ryde Business Centre
+ North Ryde, 1591
+ Australia
+
+ Tel: +61 9978 7009
+ E-mail: techsupport@oa.com.au"
+ DESCRIPTION
+ "The Structure of Management Information for Open Access entrerprise."
+-- REVISION "9505160000Z"
+-- DESCRIPTION
+-- "Initial version of this MIB module."
+ ::= { enterprises 1732 }
+
+
+oadirectory OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Reserved for future use"
+ ::= { oa 1 }
+
+oacommon OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Subtree for NetSpire common MIBs."
+ ::= { oa 2 }
+
+oaspecific OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Subtree for NetSpire device specific MIBs."
+ ::= { oa 3 }
+
+oaexperimental OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Reserved for future use"
+ ::= { oa 4 }
+
+END
diff --git a/MIBS/openaccess/OACOMMON-MIB b/MIBS/openaccess/OACOMMON-MIB new file mode 100644 index 0000000..101133f --- /dev/null +++ b/MIBS/openaccess/OACOMMON-MIB @@ -0,0 +1,778 @@ +OACOMMON-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, Counter32 FROM SNMPv2-SMI
+ oacommon FROM OA-SMI
+ DisplayString FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF;
+
+-- 1.3.6.1.4.1.1732.2.1.1
+
+netspire MODULE-IDENTITY
+ LAST-UPDATED "201610050000Z" -- 2016 October 5 12:00AM"
+ ORGANIZATION "Open Access Pty Ltd."
+ CONTACT-INFO
+ " Open Access Pty Ltd
+ Customer Service
+
+ Postal: PO Box 61 North Ryde Business Centre
+ North Ryde, 1591
+ Australia
+
+ Web: http://www.oa.com.au
+ Tel: +61 9978 7009
+ E-mail: techsupport@oa.com.au"
+ DESCRIPTION "NetSpire Device Common Detail"
+ ::= { oacommon 1 }
+
+-- ===========================================================================
+-- ====================== Enumeration G r o u p =========================
+-- ===========================================================================
+
+-- 1.3.6.1.4.1.1732.2.1.1
+netspireDeviceName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Name"
+ ::= { netspire 1 }
+
+-- 1.3.6.1.4.1.1732.2.1.2
+netspireDeviceUnitLocation OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Unit Location"
+ ::= { netspire 2 }
+
+-- 1.3.6.1.4.1.1732.2.1.3
+netSpireDeviceAlarmStatus OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Alarm Status"
+ ::= { netspire 3 }
+
+-- 1.3.6.1.4.1.1732.2.1.4
+netSpireDeviceUptime OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Uptime in Seconds"
+ ::= { netspire 4 }
+
+-- 1.3.6.1.4.1.1732.2.1.5
+netSpireDeviceCurrentTime OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Current Wall Time"
+ ::= { netspire 5 }
+
+-- 1.3.6.1.4.1.1732.2.1.6
+netSpireDeviceTimeSource OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Time Source"
+ ::= { netspire 6 }
+
+-- 1.3.6.1.4.1.1732.2.1.7
+netSpireDeviceRestartCount OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Restart Count"
+ ::= { netspire 7 }
+
+-- 1.3.6.1.4.1.1732.2.1.8
+netSpireDeviceStorageUsed OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Storage Percentage"
+ ::= { netspire 8 }
+
+-- 1.3.6.1.4.1.1732.2.1.9
+netSpireDeviceCPULoad OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device CPU Load Percentage"
+ ::= { netspire 9 }
+
+-- 1.3.6.1.4.1.1732.2.1.10
+netSpireDeviceSystemTemperature OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device System Temperature in Celsius"
+ ::= { netspire 10 }
+
+-- 1.3.6.1.4.1.1732.2.1.11
+netSpireDeviceDeviceSerialNo OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Serial Number"
+ ::= { netspire 11 }
+
+-- 1.3.6.1.4.1.1732.2.1.12
+netSpireDeviceProductionDate OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Production Date"
+ ::= { netspire 12 }
+
+-- 1.3.6.1.4.1.1732.2.1.13
+netSpireDeviceHardwareRevision OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Hardware Revision"
+ ::= { netspire 13 }
+
+-- 1.3.6.1.4.1.1732.2.1.14
+netSpireDeviceWarrantyExpiryDate OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Warranty Expiry Date"
+ ::= { netspire 14 }
+
+-- 1.3.6.1.4.1.1732.2.1.15
+netSpireDeviceBootFirmwareVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Boot Firmware Version"
+ ::= { netspire 15 }
+
+-- 1.3.6.1.4.1.1732.2.1.16
+netSpireDeviceSystemFirmwareVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device System Firmware Version"
+ ::= { netspire 16 }
+
+-- 1.3.6.1.4.1.1732.2.1.17
+netSpireDeviceFaultActive OBJECT-TYPE
+ SYNTAX INTEGER {
+ Inactive(0),
+ Active(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Whether the fault is active or not."
+ ::= { netspire 17 }
+
+-- 1.3.6.1.4.1.1732.2.1.18
+netSpireDeviceAlarmDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Alarm Description"
+ ::= { netspire 18 }
+
+-- 1.3.6.1.4.1.1732.2.1.19
+netSpireDeviceNonAckFaultActive OBJECT-TYPE
+ SYNTAX INTEGER {
+ Inactive(0),
+ Active(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Whether an unacknowledged fault is active or not."
+ ::= { netspire 19 }
+
+-- 1.3.6.1.4.1.1732.2.1.20
+netSpireDeviceInfoFaultCount OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The number currently active alarms on the device where alarm severity is Info."
+ ::= { netspire 20 }
+
+-- 1.3.6.1.4.1.1732.2.1.21
+netSpireDeviceMinorFaultCount OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The number currently active alarms on the device where alarm severity is Minor."
+ ::= { netspire 21 }
+
+-- 1.3.6.1.4.1.1732.2.1.22
+netSpireDeviceMajorFaultCount OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The number currently active alarms on the device where alarm severity is Major."
+ ::= { netspire 22 }
+
+-- 1.3.6.1.4.1.1732.2.1.23
+netSpireDeviceSevereFaultCount OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The number currently active alarms on the device where alarm severity is Severe."
+ ::= { netspire 23 }
+
+-- 1.3.6.1.4.1.1732.2.1.24
+netSpireDeviceInfoNonAckFaultCount OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The number currently active alarms on the device that are not acknowledged where alarm severity is Info."
+ ::= { netspire 24 }
+
+-- 1.3.6.1.4.1.1732.2.1.25
+netSpireDeviceMinorNonAckFaultCount OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The number currently active alarms on the device that are not acknowledged where alarm severity is Minor."
+ ::= { netspire 25 }
+
+-- 1.3.6.1.4.1.1732.2.1.26
+netSpireDeviceMajorNonAckFaultCount OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The number currently active alarms on the device that are not acknowledged where alarm severity is Major."
+ ::= { netspire 26 }
+
+-- 1.3.6.1.4.1.1732.2.1.27
+netSpireDeviceSevereNonAckFaultCount OBJECT-TYPE
+ SYNTAX Integer
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "The number currently active alarms on the device that are not acknowledged where alarm severity is Severe."
+ ::= { netspire 27 }
+
+-- 1.3.6.1.4.1.1732.2.1.28
+CurrentMaxFaultSeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ None(0),
+ Info(1),
+ Minor(2),
+ Major(3),
+ Savere(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The maximum severity of all currently active alarms."
+ ::= { netspire 28 }
+
+-- 1.3.6.1.4.1.1732.2.1.29
+CurrentMaxNonAckFaultSeverity OBJECT-TYPE
+ SYNTAX INTEGER {
+ None(0),
+ Info(1),
+ Minor(2),
+ Major(3),
+ Savere(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The maximum severity of all currently active and not acknowledged alarms."
+ ::= { netspire 29 }
+
+-- 1.3.6.1.4.1.1732.2.1.32
+Faults OBJECT-TYPE
+ SYNTAX SEQUENCE OF Fault
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A table containing the faults for the device."
+ ::= { netspire 32 }
+
+-- 1.3.6.1.4.1.1732.2.1.32.1
+Fault OBJECT-TYPE
+ SYNTAX Fault
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Device fault definition"
+ INDEX { Type }
+ ::= { Faults 1 }
+
+Fault ::=
+ SEQUENCE {
+ Type INTEGER,
+ Severity INTEGER,
+ Module DisplayString,
+ ErrorText DisplayString,
+ Acknowledged DisplayString,
+ Device DisplayString
+ }
+
+-- 1.3.6.1.4.1.1732.2.1.32.1.1
+Type OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The type of the fault."
+ ::= { Fault 1 }
+
+-- 1.3.6.1.4.1.1732.2.1.32.1.3
+Module OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The module in which the fault was detected."
+ ::= { Fault 3 }
+
+-- 1.3.6.1.4.1.1732.2.1.32.1.4
+ErrorText OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "A human readable summary of the fault."
+ ::= { Fault 4 }
+
+-- 1.3.6.1.4.1.1732.2.1.32.1.5
+Acknowledged OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Shows whether a user has acknowledged the fault."
+ ::= { Fault 5 }
+
+-- 1.3.6.1.4.1.1732.2.1.32.1.6
+Device OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The device on which the alarm is active."
+ ::= { Fault 6 }
+
+-- 1.3.6.1.4.1.1732.2.1.33
+netspireDigitalInCount OBJECT-TYPE
+ SYNTAX Integer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Number of Digital Inputs present"
+ ::= { netspire 33}
+
+-- 1.3.6.1.4.1.1732.2.1.34
+netspireDigitalOutCount OBJECT-TYPE
+ SYNTAX Integer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Number of Digital Outputs present"
+ ::= { netspire 34}
+
+-- 1.3.6.1.4.1.1732.2.1.36
+netspireDigitalInTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DigitalInEntry
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Information for each Digital Input Port."
+ ::= { netspire 36 }
+
+digitalInEntry OBJECT-TYPE
+ SYNTAX DigitalInEntry
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Digital Input Port Information"
+ INDEX { digitalInPort }
+ ::= { netspireDigitalInTable 1 }
+
+DigitalInEntry ::=
+ SEQUENCE {
+ digitalInPort DigitalInPort,
+ digitalInName DigitalInName,
+ digitalInState DigitalInState
+ }
+
+digitalInPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Digital Intput port"
+ ::= { digitalInEntry 1 }
+
+digitalInName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Digital Intput name"
+ ::= { digitalInEntry 2 }
+
+digitalInStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ Low(0),
+ High(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Digital Input status"
+ ::= { digitalInEntry 3 }
+
+
+-- 1.3.6.1.4.1.1732.2.1.37
+netspireDigitalOutTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DigitalOutEntry
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Information for each Digital Output Port."
+ ::= { netspire 37 }
+
+digitalOutEntry OBJECT-TYPE
+ SYNTAX DigitalOutEntry
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Digital Output Port Information"
+ INDEX { digitalOutPort }
+ ::= { netspireDigitalOutTable 1 }
+
+DigitalOutEntry ::=
+ SEQUENCE {
+ digitalOutPort DigitalOutPort,
+ digitalOutName DigitalOutName,
+ digitalOutState DigitalOutState
+ }
+
+digitalOutPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Digital Output port"
+ ::= { digitalOutEntry 1 }
+
+digitaloOutName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Digital Output name"
+ ::= { digitalOutEntry 2 }
+
+digitalOutStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ Low(0),
+ High(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Digital Output status"
+ ::= { digitalOutEntry 3 }
+
+
+-- 1.3.6.1.4.1.1732.2.1.40
+netspireDeviceDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Description"
+ ::= { netspire 40 }
+
+-- 1.3.6.1.4.1.1732.2.1.41
+netspireDeviceModelName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "NetSpire Device Model Name"
+ ::= { netspire 41 }
+
+-- 1.3.6.1.4.1.1732.2.1.43
+ManagedDeviceCount OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Managed Device Count"
+ ::= { netspire 43 }
+
+-- 1.3.6.1.4.1.1732.2.1.44
+ManagedDisplayCount OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Managed Display Count"
+ ::= { netspire 44 }
+
+-- 1.3.6.1.4.1.1732.2.1.46
+ManagedDevicetable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Device
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A table containing the managed device."
+ ::= { netspire 46 }
+
+-- 1.3.6.1.4.1.1732.2.1.46.1
+ManagedDevice OBJECT-TYPE
+ SYNTAX Device
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Managed Device"
+ INDEX { DestinationNumber }
+ ::= { ManagedDevicetable 1 }
+
+Device ::=
+ SEQUENCE {
+ DestinationNumber INTEGER,
+ Name DisplayString,
+ Location DisplayString,
+ IP DisplayString,
+ Online INTEGER
+ }
+
+-- 1.3.6.1.4.1.1732.2.1.46.1.1
+DestinationNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Device Destination Number"
+ ::= { ManagedDevice 1 }
+
+-- 1.3.6.1.4.1.1732.2.1.46.1.2
+Name OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Device Name"
+ ::= { ManagedDevice 2 }
+
+-- 1.3.6.1.4.1.1732.2.1.46.1.3
+Location OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Device Location"
+ ::= { ManagedDevice 3 }
+
+-- 1.3.6.1.4.1.1732.2.1.46.1.4
+IP OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Ip address"
+ ::= { ManagedDevice 4 }
+
+-- 1.3.6.1.4.1.1732.2.1.46.1.5
+Online OBJECT-TYPE
+ SYNTAX INTEGER {
+ N(0),
+ Y(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "whether a device is online or not"
+ ::= { ManagedDevice 5 }
+
+-- 1.3.6.1.4.1.1732.2.1.47
+ManagedDisplaytable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Display
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A table containing the managed display."
+ ::= { netspire 47 }
+
+-- 1.3.6.1.4.1.1732.2.1.47.1
+ManagedDisplay OBJECT-TYPE
+ SYNTAX Display
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Managed Display"
+ INDEX { DisplayNumber }
+ ::= { ManagedDisplaytable 1 }
+
+Display ::=
+ SEQUENCE {
+ DisplayNumber INTEGER,
+ Name DisplayString,
+ Location DisplayString,
+ IP DisplayString,
+ Online INTEGER
+ }
+
+-- 1.3.6.1.4.1.1732.2.1.47.1.1
+DisplayNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Display Number"
+ ::= { ManagedDisplay 1 }
+
+-- 1.3.6.1.4.1.1732.2.1.47.1.2
+Name OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Display Name"
+ ::= { ManagedDisplay 2 }
+
+-- 1.3.6.1.4.1.1732.2.1.47.1.3
+Location OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Display Location"
+ ::= { ManagedDisplay 3 }
+
+-- 1.3.6.1.4.1.1732.2.1.47.1.4
+IP OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Ip address"
+ ::= { ManagedDisplay 4 }
+
+-- 1.3.6.1.4.1.1732.2.1.47.1.5
+Online OBJECT-TYPE
+ SYNTAX INTEGER {
+ N(0),
+ Y(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "whether a display is online or not"
+ ::= { ManagedDisplay 5 }
+
+-- ===========================================================================
+-- ======================== Control G r o u p ===========================
+-- ===========================================================================
+
+-- 1.3.6.1.4.1.1732.2.2
+control OBJECT IDENTIFIER ::= { oacommon 2 }
+
+-- 1.3.6.1.4.1.1732.2.2.1
+netSpireSystemBackup OBJECT-TYPE
+ SYNTAX INTEGER {
+ Inactive(0),
+ InProgress(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Set to one to commence system backup"
+ ::= { control 1 }
+
+
+-- 1.3.6.1.4.1.1732.2.2.2
+netSpireSystemRestore OBJECT-TYPE
+ SYNTAX INTEGER {
+ Inactive(0),
+ InProgress(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Set to one to commence system restore"
+ ::= { control 2 }
+
+
+-- 1.3.6.1.4.1.1732.2.2.3
+netSpireSystemSelfHealthCheck OBJECT-TYPE
+ SYNTAX INTEGER {
+ Inactive(0),
+ InProgress(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Set to one to initiate self health check"
+ ::= { control 3 }
+
+-- 1.3.6.1.4.1.1732.2.2.4
+netSpireSystemFactoryReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ Inactive(0),
+ InProgress(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Set to one to reset to factory defaults"
+ ::= { control 4 }
+
+
+-- 1.3.6.1.4.1.1732.2.2.5
+netSpireSystemRestart OBJECT-TYPE
+ SYNTAX INTEGER {
+ Inactive(0),
+ InProgress(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Set to one to restart device"
+ ::= { control 5 }
+
+-- 1.3.6.1.4.1.1732.2.2.6
+netSpireSystemReboot OBJECT-TYPE
+ SYNTAX INTEGER {
+ Inactive(0),
+ InProgress(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Set to one to reboot device"
+ ::= { control 6 }
+
+
+-- 1.3.6.1.4.1.1732.2.2.7
+netSpireSystemIsolate OBJECT-TYPE
+ SYNTAX INTEGER {
+ Available(0),
+ Isolated(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Set to one to isolate device"
+ ::= { control 7 }
+
+
+-- 1.3.6.1.4.1.1732.2.2.8
+netSpireSystemSetTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Set system time"
+ ::= { control 8 }
+
+-- 1.3.6.1.4.1.1732.2.2.9
+netSpireSystemTimeZone OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Set system timezone offset in hours"
+ ::= { control 9 }
+
+-- 1.3.6.1.4.1.1732.2.2.10
+netSpireDigitalOutControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DigitalOutControlEntry
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Control for each Digital Output Port."
+ ::= { control 10 }
+
+digitalOutControlEntry OBJECT-TYPE
+ SYNTAX DigitalOutControlEntry
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Digital Output Port Control"
+ INDEX { digitalOutPort }
+ ::= { netSpireDigitalOutControlTable 1 }
+
+DigitalOutControlEntry ::=
+ SEQUENCE {
+ digitalOutPort DigitalOutControlPort,
+ digitalOutSetState DigitalOutSetState
+ }
+
+digitalOutControlPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Digital Output Control Port"
+ ::= { digitalOutControlEntry 1 }
+
+digitalOutSetState OBJECT-TYPE
+ SYNTAX INTEGER {
+ High (0),
+ Low (1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Digital Output Set State"
+ ::= { digitalOutControlEntry 2 }
+
+END
|