diff options
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-TC-MIB')
| -rw-r--r-- | MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-TC-MIB | 1207 |
1 files changed, 1207 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-TC-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-TC-MIB new file mode 100644 index 0000000..1830939 --- /dev/null +++ b/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-TC-MIB @@ -0,0 +1,1207 @@ +ALCATEL-IND1-TIMETRA-TC-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + Unsigned32, Integer32 FROM SNMPv2-SMI + + TEXTUAL-CONVENTION FROM SNMPv2-TC + + timetraModules FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB + ; + +timetraTCMIBModule MODULE-IDENTITY + LAST-UPDATED "0801010000Z" + ORGANIZATION "Alcatel" + CONTACT-INFO + "Alcatel 7x50 Support + Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml" + DESCRIPTION + "This document is the SNMP MIB module for the SNMP Textual + Conventions (TCs) used in the Alcatel 7x50 manageability + instrumentation. + + Copyright 2003-2008 Alcatel-Lucent. All rights reserved. + Reproduction of this document is authorized on the condition + that the foregoing copyright notice is included. + + This SNMP MIB module (Specification) embodies Alcatel's + proprietary intellectual property. Alcatel retains + all title and ownership in the Specification, including any + revisions. + + Alcatel grants all interested parties a non-exclusive + license to use and distribute an unmodified copy of this + Specification in connection with management of Alcatel + products, and without fee, provided this copyright notice and + license appear on all copies. + + This Specification is supplied `as is', and Alcatel + makes no warranty, either express or implied, as to the use, + operation, condition, or performance of the Specification." + +-- +-- Revision History +-- + REVISION "0801010000Z" + DESCRIPTION "Rev 6.0 01 Jan 2008 00:00 + 6.0 release of the TIMETRA-TC-MIB." + + REVISION "0701010000Z" + DESCRIPTION "Rev 5.0 01 Jan 2007 00:00 + 5.0 release of the TIMETRA-TC-MIB." + + REVISION "0603230000Z" + DESCRIPTION "Rev 4.0 23 Mar 2006 00:00 + 4.0 release of the TIMETRA-TC-MIB." + + REVISION "0508310000Z" + DESCRIPTION "Rev 3.0 31 Aug 2005 00:00 + 3.0 release of the TIMETRA-TC-MIB." + + REVISION "0501240000Z" + DESCRIPTION "Rev 2.1 24 Jan 2005 00:00 + 2.1 release of the TIMETRA-TC-MIB." + + REVISION "0401150000Z" + DESCRIPTION "Rev 2.0 15 Jan 2004 00:00 + 2.0 release of the TIMETRA-TC-MIB." + + REVISION "0308150000Z" + DESCRIPTION "Rev 1.2 15 Aug 2003 00:00 + 1.2 release of the TIMETRA-TC-MIB." + + REVISION "0301200000Z" + DESCRIPTION "Rev 1.0 20 Jan 2003 00:00 + 1.0 Release of the TIMETRA-TC-MIB." + + REVISION "0105290000Z" + DESCRIPTION "Rev 0.1 14 Aug 2000 00:00 + First version of the TIMETRA-TC-MIB." + + ::= { timetraModules 2 } + +-- InterfaceIndex TC is defined here to work about problems with +-- importing from IF-MIB, rfc1573.mib + + -- InterfaceIndex contains the semantics of ifIndex and + -- should be used for any objects defined on other mib + -- modules that need these semantics. + +InterfaceIndex ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "A unique value, greater than zero, for each interface + or interface sub-layer in the managed system. It is + recommended that values are assigned contiguously + starting from 1. The value for each interface sub- + layer must remain constant at least from one re- + initialization of the entity's network management + system to the next re-initialization." + SYNTAX Integer32 + +TmnxPortID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A portid is an unique 32 bit number encoded as shown below. + + 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | + +-----+-------+-------+-------+-------+ + |000 | slot | mda | port | zero | Physical Port + +-----+-------+-------+-------+-------+ + + 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | + +-----+-------+-------+-------+-------+ + |001 | slot | mda | port |channel| Channel + +-----+-------+-------+-------+-------+ + + Slots, mdas (if present), ports, and channels are numbered + starting with 1. + + 32 29 | 28 10 | 9 1 | + +---------+-------------------+-------+ + | 0 1 0 0 | zeros | ID | Virtual Port + +---------+-------------------+-------+ + + 32 29 | 28 9 | 8 1 | + +---------+---------------------+-----+ + | 0 1 0 1 | zeros | ID | LAG Port + +---------+---------------------+-----+ + + A card port number (cpn) has significance within the context + of the card on which it resides(ie., cpn 2 may exist in one or + more cards in the chassis). Whereas, portid is an + unique/absolute port number (apn) within a given chassis. + + An 'invalid portid' is a TmnxPortID with a value of 0x1e000000 as + represented below. + + 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | + +-----+-------+-------+-------+-------+ + |zero | ones | zero | zero | zero | Invalid Port + +-----+-------+-------+-------+-------+" + + SYNTAX Unsigned32 + +TmnxEncapVal ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of the label used to identify the entity using the + specified encapsulation value on a specific port. + + The format of this object depends on the encapsulation type + defined on this port. + + When the encapsulation is nullEncap the value of this object + must be zero. + + 31 0 + +--------+--------+--------+--------+ + |00000000 00000000 00000000 00000000| + +--------+--------+--------+--------+ + + When the encapsulation is dot1qEncap the value of this object + is equal to the 12-bit IEEE 802.1Q VLAN ID. + + 31 0 + +--------+--------+--------+--------+ + |00000000 00000000 0000XXXX XXXXXXXX| + +--------+--------+--------+--------+ + + When the encapsulation is mplsEncap the value of this object + is equal to the 20-bit LSP ID. + + 31 0 + +--------+--------+--------+--------+ + |00000000 0000XXXX XXXXXXXX XXXXXXXX| + +--------+--------+--------+--------+ + + When the encapsulation is frEncap, the value of this object is + equal to the 10-bit Frame Relay DLCI. + + 31 0 + +--------+--------+--------+--------+ + |00000000 00000000 000000XX XXXXXXXX| + +--------+--------+--------+--------+ + + When the encapsulation is qinqEncap, the value of the outer + 802.1Q VLAN ID is encoded in the least significant 16 bits, + and the value of the inner VLAN ID is encoded in the most + significant 16 bits. + + 31 0 + +--------+--------+--------+--------+ + |0000YYYY YYYYYYYY 0000XXXX XXXXXXXX| + +--------+--------+--------+--------+ + + When the encapsulation is atmEncap, the value + of the ATM VCI is encoded in the least significant + 16 bits, and the value of the ATM VPI is encoded + in the next 12 bits. + + For ATM VCs, the top 2 bits are 00. The value of + the ATM VCI is encoded in the least significant 16 + bits, and the value of the ATM VPI is encoded in the next + 12 bits. + + 31 0 + +--------+--------+--------+--------+ + |0000YYYY YYYYYYYY XXXXXXXX XXXXXXXX| + +--------+--------+--------+--------+ + + For ATM VPs, the top 2 bits are 01. The value of + the ATM VPI is encoded in the least significant 12 bits. + + 31 0 + +--------+--------+--------+--------+ + |01000000 00000000 0000XXXX XXXXXXXX| + +--------+--------+--------+--------+ + + For ATM VP ranges, the top 2 bits are 10. The value of + the start of the ATM VPI range is encoded in the least significant + 12 bits, and the value of the end of the ATM VP range is encoded + in the next 12 bits. + + 31 0 + +--------+--------+--------+--------+ + |10000000 YYYYYYYY YYYYXXXX XXXXXXXX| + +--------+--------+--------+--------+ + + For ATM ports, the top 2 bits are 11, and the rest of the bits + must be zero. + + 31 0 + +--------+--------+--------+--------+ + |11000000 00000000 00000000 00000000| + +--------+--------+--------+--------+ + + When the encapsulation is wanMirrorEncap the value of this + object is equal to the 12-bit value. + + 31 0 + +--------+--------+--------+--------+ + |00000000 00000000 0000XXXX XXXXXXXX| + +--------+--------+--------+--------+ + + Some ports have a restrictions to the encapsulation types that + they can support and hence impose restrictions on the respective + formats defined above." + SYNTAX Unsigned32 + +QTag ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The QTag data type is a 12-bit integer tag used to identify + a service. The values 0 and 4095 are not allowed." + SYNTAX INTEGER (1..4094) + +QTagOrZero ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type QTagOrZero represents a VLAN tag. + + The value '0' indicates that no VLAN tag is provisioned, or that its value + is unknown." + SYNTAX Unsigned32 (0..4094) + +TmnxStrSapId ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The value of TmnxStrSapId is a printable string which + contains the owner SAP Id or equivalent on a remote system. + + The string should contain the printable string equivalent of the + textual-conventions TmnxPortID and TmnxEncapVal in the format + specified as TmnxPortID[:TmnxEncapVal]" + SYNTAX OCTET STRING (SIZE (0..32)) + +IpAddressPrefixLength ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "the number of bits to match in an IP address mask." + REFERENCE "" + SYNTAX INTEGER (0..32) + +-- +-- TmnxActionType +-- +TmnxActionType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The TmnxActionType data type is an enumerated integer + that describes the values used to support action or + operation style commands. Setting a variable of this + type to 'doAction' causes the action to occur. GETs and + GETNEXTs on this variable return 'not-applicable'." + SYNTAX INTEGER { + doAction (1), + notApplicable (2) + } + +TmnxAdminState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The TmnxAdminState data type is an enumerated integer that describes + the values used to identify the administratively desired state of + functional modules." + SYNTAX INTEGER { + noop (1), + inService (2), + outOfService (3) + } + +TmnxOperState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The TmnxOperState data type is an enumerated integer that describes + the values used to identify the current operational state of functional + modules." + SYNTAX INTEGER { + unknown (1), + inService (2), + outOfService (3), + transition (4) + } + +TmnxStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The TmnxStatus data type is an enumerated integer that describes the + values used to identify the current status of functional modules in the + system such as OSPF and MPLS protocols. Setting this variable to + 'create' causes instantiation of the feature in the system. Setting it + to 'delete' removes the instance and all associated configuration + information." + SYNTAX INTEGER { + create (1), + delete (2) + } + +TmnxEnabledDisabled ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The TmnxEnabledDisabled data type is an enumerated integer that + describes the values used to identify whether an entity is + 'enabled' or 'disabled'." + SYNTAX INTEGER { + enabled (1), + disabled (2) + } + +TNamedItem ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The name of an item. When used as an index to a table, the item + name uniquely identifies the instance. When used in a reference + (TNamedItemOrEmpty) the item name entry must exist in the table. + + Note, use only NVT ASCII displayable characters + here, no control characters, no UTF-8, etc." + SYNTAX OCTET STRING (SIZE (1..32)) + +TNamedItemOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The name of an item, or an empty string. When used in a reference + (TNamedItemOrEmpty) the item name entry must exist in the table. + + Note, use only NVT ASCII displayable characters + here, no control characters, no UTF-8, etc." + SYNTAX OCTET STRING (SIZE (0 | 1..32)) + +TItemDescription ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "Description for an item. Note, use only NVT ASCII displayable characters + here, no control characters, no UTF-8, etc." + SYNTAX OCTET STRING (SIZE(0..80)) + +TItemLongDescription ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "Longer description for an item. Note, use only NVT ASCII displayable + characters here, no control characters, no UTF-8, etc." + SYNTAX OCTET STRING (SIZE(0..160)) + +TmnxVRtrID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A number used to identify a virtual router instance in the system." + SYNTAX Integer32 (1..4096) + +TmnxVRtrIDOrZero ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A number used to identify a virtual router instance in the system. + The number 0 will have special significance in the context the TC + is used." + SYNTAX Integer32 (0..4096) + +TmnxBgpAutonomousSystem ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "an autonomous system (AS) number." + REFERENCE "BGP4-MIB.bgpPeerRemoteAs" + SYNTAX INTEGER (0..65535) + +TmnxBgpLocalPreference ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "a local route preference value." + REFERENCE "RFC 1771 section 4.3 Path Attributes e)" + SYNTAX Unsigned32 + +TmnxBgpPreference ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "a route preference value." + REFERENCE "RFC 1771 section 4.3 Path Attributes e)" + SYNTAX Unsigned32 (0..255) + +TmnxCustId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A number used to identify a Customer or + Subscriber. This ID must be unique within + the Service Domain. The value 0 is used as + the null ID." + SYNTAX Unsigned32 (0|1..2147483647) + +TmnxServId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A number used to identify a Service. This ID + must be unique within the Service Domain. + The value 0 is used as the null ID." + SYNTAX Unsigned32 (0|1..2147483647) + +ServiceAdminStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "ServiceAdminStatus data type is an enumerated integer that + describes the values used to identify the administrative + state of a service." + REFERENCE "" + SYNTAX INTEGER { + up(1), + down(2) + } + +ServiceOperStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "ServiceOperStatus data type is an enumerated integer that + describes the values used to identify the current operational + state of a service." + REFERENCE "" + SYNTAX INTEGER { + up(1), + down(2) + } + +TPolicyID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The identification number of a policy." + SYNTAX Unsigned32 (0..65535) + +TSapIngressPolicyID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The identification number of a SAP ingress policy." + SYNTAX Unsigned32 (0..65535) + +TSapEgressPolicyID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The identification number of a SAP egress policy." + SYNTAX Unsigned32 (1..65535) + +TPolicyStatementNameOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The name of a policy statement, when an object refers to it." + SYNTAX OCTET STRING (SIZE (0 | 1..32)) + +TmnxVcType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The value of TmnxVcType is an enumerated integer that + indicates a Virtual Circuit (VC) type. 'frDlciMartini(1)' + replaces the old 'frDlci' when used over martini tunnels." + SYNTAX INTEGER { + frDlciMartini(1), + atmSdu(2), + atmCell(3), + ethernetVlan(4), + ethernet(5), + atmVccCell(9), + atmVpcCell(10), + ipipe(11), + satopE1(17), + satopT1(18), + satopE3(19), + satopT3(20), + cesopsn(21), + cesopsnCas(23), + frDlci(25), + mirrorDest(4096) + } + +TmnxVcId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A 32 bit number is used to identify a VC(Virtual Circuit). + The VC ID cannot be 0." + SYNTAX Unsigned32 (1..4294967295) + +TmnxVcIdOrNone ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A 32 bit number is used to identify a VC(Virtual Circuit). + A value of 0 indicates no VC ID is configured or + available." + SYNTAX Unsigned32 (0|1..4294967295) + + +-- generic TEXTUAL-CONVENTIONs for common technology (IEEE, IETF) + + +Dot1PPriority ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "IEEE 802.1p priority. zero is lowest, seven is highest. + -1 means not set" + REFERENCE "" + SYNTAX INTEGER (-1 | 0..7) + +ServiceAccessPoint ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "802.2 LLC SAP value, Source and Destination." + REFERENCE + "assigned numbers: http://www.iana.org/assignments/ieee-802-numbers" + SYNTAX INTEGER (-1 | 0..255) + +TLspExpValue ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "MPLS Experimental bits. -1 means not set." + REFERENCE "" + SYNTAX INTEGER (-1 | 0..7) + +TIpProtocol ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "IP protocol number. well known protocol numbers include ICMP(1), + TCP(6), UDP(17). + + -1 means value not set. + -2 indicates protocol wildcard for UDP and TCP." + REFERENCE "http://www.iana.org/assignments/protocol-numbers" + SYNTAX INTEGER (-2 | -1 | 0..255) + +TIpOption ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "IP packet options octet. explanation of the octet bits: + + IP OPTION NUMBERS + + The Internet Protocol (IP) has provision for optional header fields + identified by an option type field. Options 0 and 1 are exactly one + octet which is their type field. All other options have their one + octet type field, followed by a one octet length field, followed by + length-2 octets of option data. The option type field is sub-divided + into a one bit copied flag, a two bit class field, and a five bit + option number. These taken together form an eight bit value for the + option type field. IP options are commonly refered to by this value. + + + Copy Class Number Value Name Reference + ---- ----- ------ ----- ------------------------------- --------- + 0 0 0 0 EOOL - End of Options List [RFC791,JBP] + 0 0 1 1 NOP - No Operation [RFC791,JBP] + 1 0 2 130 SEC - Security [RFC1108] + 1 0 3 131 LSR - Loose Source Route [RFC791,JBP] + 0 2 4 68 TS - Time Stamp [RFC791,JBP] + 1 0 5 133 E-SEC - Extended Security [RFC1108] + 1 0 6 134 CIPSO - Commercial Security [???] + 0 0 7 7 RR - Record Route [RFC791,JBP] + 1 0 8 136 SID - Stream ID [RFC791,JBP] + 1 0 9 137 SSR - Strict Source Route [RFC791,JBP] + 0 0 10 10 ZSU - Experimental Measurement [ZSu] + 0 0 11 11 MTUP - MTU Probe [RFC1191]* + 0 0 12 12 MTUR - MTU Reply [RFC1191]* + 1 2 13 205 FINN - Experimental Flow Control [Finn] + 1 0 14 142 VISA - Expermental Access Control [Estrin] + 0 0 15 15 ENCODE - ??? [VerSteeg] + 1 0 16 144 IMITD - IMI Traffic Descriptor [Lee] + 1 0 17 145 EIP - Extended Internet Protocol[RFC1385] + 0 2 18 82 TR - Traceroute [RFC1393] + 1 0 19 147 ADDEXT - Address Extension [Ullmann IPv7] + 1 0 20 148 RTRALT - Router Alert [RFC2113] + 1 0 21 149 SDB - Selective Directed Broadcast[Graff] + 1 0 22 150 NSAPA - NSAP Addresses [Carpenter] + 1 0 23 151 DPS - Dynamic Packet State [Malis] + 1 0 24 152 UMP - Upstream Multicast Pkt. [Farinacci] + + [Note, an asterisk (*) denotes an obsoleted IP Option Number.] + " + REFERENCE "http://www.iana.org/assignments/ip-parameters" + SYNTAX INTEGER (0..255) + +TTcpUdpPort ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The number of a TCP or UDP port. + Well known port numbers include + ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), + pop3(110), nntp(119), snmp(161), snmptrap(162), etc." + REFERENCE "http://www.iana.org/assignments/port-numbers" + SYNTAX INTEGER (0 | 1..65535) + +TTcpUdpPortOperator ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The operator specifies the manner in which a couple of other + MIB objects in the table are supposed to be used. + + Operator Value1 Value2 + ---------------------------------------------------- + none(0) Any(0) Any(0) + eq(1) Specified Value Any(0) + range(2) Starting Value Ending Value + lt(3) Specified Value Any(0) + gt(4) Specified Value Any(0) + + 'Any(0)' specifies that, this object can accept any values + but would default to 0. " + SYNTAX INTEGER { + none(0), + eq(1), + range(2), + lt(3), + gt(4) + } + +TFrameType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The type of the frame for which this mac filter match criteria is + defined." + SYNTAX INTEGER { + e802dot3(0), + e802dot2LLC(1), + e802dot2SNAP(2), + ethernetII(3) + } + +TQueueId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of TQueueId specifies the identification number of a + queue. A value of zero (0) indicates that no specific queue + identification has been assigned for this object. When an object + of type TQueueId is an SNMP table index, an index value of zero + (0) is not allowed and a noCreation error will be returned." + SYNTAX INTEGER (0 | 1..32) + +TIngressQueueId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of TIngressQueueId specifies the identification number + of an ingress queue. A value of zero (0) indicates that no + specific queue identification has been assigned for this object. + When an object of type TIngressQueueId is an SNMP table index, + an index value of zero (0) is not allowed and a noCreation error + will be returned." + SYNTAX INTEGER (0 | 1..32) + +TEgressQueueId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of TEgressQueueId specifies the identification number + of an egress queue. A value of zero (0) indicates that no + specific queue identification has been assigned for this object. + When an object of type TEgressQueueId is an SNMP table index, + an index value of zero (0) is not allowed and a noCreation error + will be returned." + SYNTAX INTEGER (0 | 1..8) + +-- +-- TEXTUAL-CONVENTIONs for Alcatel 7x50 SR series common items +-- + +TDSCPName ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The name of a Differential Services Code Point value." + SYNTAX OCTET STRING (SIZE (1..32)) + +TDSCPNameOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The name of a Differential Services Code Point value." + SYNTAX OCTET STRING (SIZE (0 | 1..32)) + +TDSCPValue ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of a Differential Services Code Point." + SYNTAX INTEGER (0..63) + +TDSCPValueOrNone ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of a Differential Services Code Point (DSCP). A value + of -1 means that no DSCP value is configured or available." + SYNTAX INTEGER (-1 | 0..63) + +TDSCPFilterActionValue ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of a Differential Services Code Point. -1 means not set." + SYNTAX INTEGER (-1 | 0..255) + +TFCName ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The name of a Forwarding Class entry." + SYNTAX OCTET STRING (SIZE (1..32)) + +TFCNameOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The name of a Forwarding Class entry." + SYNTAX OCTET STRING (SIZE (0 | 1..32)) + +TFCSet ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This data type describes a set of Forwarding Classes." + SYNTAX BITS { + be (0), + l2 (1), + af (2), + l1 (3), + h2 (4), + ef (5), + h1 (6), + nc (7) + } + +TFCType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This data type enumerates the Forwarding Classes." + SYNTAX INTEGER { + be (0), + l2 (1), + af (2), + l1 (3), + h2 (4), + ef (5), + h1 (6), + nc (7) + } + +TmnxTunnelType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The type of this tunnel entity." + SYNTAX INTEGER { + sdp (1), + ldp (2), + rsvp (3), + gre (4), + bypass (5), + invalid (6) + } + +TmnxTunnelID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The identifying value for a BGP-VPRN tunnel. Depending on the + tunnel type the associated tunnel-id may be an sdp-id, an lsp-id + or zero(0)." + SYNTAX Unsigned32 + +TmnxBgpRouteTarget ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "TmnxBgpRouteTarget is an readable string that specifies the + extended community name to be accepted by a Route Reflector Server + or advertised by the router when reflecting any routes. I.e, it + does not apply to routes that are not reflected by the router." + SYNTAX OCTET STRING (SIZE(1..32)) + +TmnxVPNRouteDistinguisher ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The VPRN route distinguisher is a 8-octet object. It contains a + 2-octet type field followed by a 6-octet value field. The type + field specify how to interpret the value field. + + Type 0 specifies two subfields as a 2-octet administrative field + and a 4-octet assigned number subfield. + + Type 1 specifies two subfields as a 4-octet administrative field + which must contain an IP address and a 2-octet assigned number + subfield. + + Type 2 specifies two subfields as a 4-octet administrative field + which contains a 4-octet AS number and a 2-octet assigned number + subfield." + SYNTAX OCTET STRING (SIZE (8)) + +SdpBindId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The value used to uniquely identify an SDP Binding. + The first four octets correspond to the zero-extended + 16-bit SDP ID, while the remaining four octets + correspond to the 32-bit VC ID, both encoded in network + byte order." + SYNTAX OCTET STRING (SIZE (8)) + +TmnxVRtrMplsLspID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A unique value, greater than zero, for each Label + Switched Path in the managed system." + SYNTAX Unsigned32 (0..65535) + +TPortSchedulerPIR ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The Peak Information Rate (PIR) rate to be used in kbps. + The value -1 means maximum rate." + SYNTAX Integer32 (-1 | 1..40000000) + +TPortSchedulerCIR ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The Committed Information Rate (CIR) rate to be used in kbps. + The value -1 means maximum rate." + SYNTAX Integer32 (-1 | 0..40000000) + +TWeight ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The weight of the specified entity while feeding into the parent." + SYNTAX Integer32 (0..100) + +TCIRRate ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The CIR rate to be used in kbps. The value -1 means maximum rate." + SYNTAX Integer32 (-1 | 0..100000000) + +TPIRRate ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The PIR rate to be used in kbps. The value -1 means maximum rate." + SYNTAX Integer32 (-1 | 1..100000000) + +TSecondaryShaper10GPIRRate ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The secondary shaper PIR rate to be used in Mbps. + The value -1 means maximum rate." + SYNTAX Integer32 (-1 | 1..10000) + +TPIRRateOverride ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The PIR rate to be used in kbps. The value -1 means maximum rate. + A value of -2 specifies no override." + SYNTAX Integer32 (-2 | -1 | 1..100000000) + +TPIRRateOrZero ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The PIR rate to be used in kbps. The value -1 means maximum rate. + The value 0 means undefined rate." + SYNTAX Integer32 (-1 | 0..100000000) + +TmnxDHCP6MsgType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The DHCP6 messagetype." + SYNTAX INTEGER { + dhcp6MsgTypeSolicit (1), + dhcp6MsgTypeAdvertise (2), + dhcp6MsgTypeRequest (3), + dhcp6MsgTypeConfirm (4), + dhcp6MsgTypeRenew (5), + dhcp6MsgTypeRebind (6), + dhcp6MsgTypeReply (7), + dhcp6MsgTypeRelease (8), + dhcp6MsgTypeDecline (9), + dhcp6MsgTypeReconfigure (10), + dhcp6MsgTypeInfoRequest (11), + dhcp6MsgTypeRelayForw (12), + dhcp6MsgTypeRelayReply (13), + dhcp6MsgTypeMaxValue (14) + } + +TmnxOspfInstance ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A number used to identify an instance of OSPF." + SYNTAX Unsigned32 (0..31) + +TmnxBGPFamilyType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The value of TmnxBGPFamilyType specifies the AFI-SAFI family for + BGP peer." + SYNTAX BITS { + ipv4Unicast (0), + ipv4Multicast (1), + ipv4UastMcast (2), + ipv4MplsLabel (3), + ipv4Vpn (4), + ipv6Unicast (5), + ipv6Multicast (6), + ipv6UcastMcast (7), + ipv6MplsLabel (8), + ipv6Vpn (9) + } + +TmnxIgmpGroupFilterMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxIgmpGroupFilterMode describes the filter-mode of + a group. + + In 'include(1)' mode, reception of packets sent to the specified + multicast address is requested only from those IPv4 Source addresses + listed in the corresponding source-list. + + In 'exclude(2)' mode, reception of packets sent to the given multicast + address is requested from all IPv4 Source addresses, except those + listed in the corresponding source-list (if any)." + SYNTAX INTEGER { + include (1), + exclude (2) + } + +TmnxIgmpGroupType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxIgmpGroupType describes how a multicast group is + learned." + SYNTAX INTEGER { + static(1), + dynamic(2) + } + +TmnxIgmpVersion ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxIgmpVersion denotes the version of the IGMP protocol: + - 'version1(1)': means version 1 of the IGMP protocol + - 'version2(2)': means version 2 of the IGMP protocol + - 'version3(3)': means version 3 of the IGMP protocol." + SYNTAX INTEGER { + version1(1), + version2(2), + version3(3) + } + +TmnxMldGroupFilterMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxMldGroupFilterMode describes the filter-mode of a + group. + + In 'include(1)' mode, reception of packets sent to the specified + multicast address is requested only from those IPv6 source addresses + listed in the corresponding source-list. + + In 'exclude(2)' mode, reception of packets sent to the given multicast + address is requested from all IPv6 source addresses, except those + listed in the corresponding source-list (if any)." + SYNTAX INTEGER { + include (1), + exclude (2) + } + +TmnxMldGroupType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxMldGroupType describes how a multicast group is + learned." + SYNTAX INTEGER { + static(1), + dynamic(2) + } + +TmnxMldVersion ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxMldVersion denotes the version of the MLD protocol: + - 'version1(1)': means version 1 of the MLD protocol + - 'version2(2)': means version 2 of the MLD protocol" + SYNTAX INTEGER { + version1(1), + version2(2) + } + +TmnxManagedRouteStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxManagedRouteStatus denotes the status of a Managed Route." + SYNTAX + INTEGER { + installed (0), + notYetInstalled (1), + wrongAntiSpoofType (2), + outOfMemory (3), + shadowed (4), + routeTableFull (5), + parentInterfaceDown (6) + } + +-- +-- Textual conventions for GSMP +-- +TmnxAncpString ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The TmnxAncpString data type contains a valid ancp string." + SYNTAX OCTET STRING (SIZE (1..63)) + +TmnxAncpStringOrZero ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The TmnxAncpStringOrZero data type contains a valid ancp string. + An empty string indicates that no ANCP string is defined." + SYNTAX OCTET STRING (SIZE (0..63)) + +-- +-- Textual conventions for Multicast Address Family +-- + +TmnxMulticastAddrFamily ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxMulticastAddrFamily denotes the family for + multicast protocol." + SYNTAX INTEGER { + ipv4Multicast (0), + ipv6Multicast (1) + } +-- +-- Textual conventions for subscriber mgmt +-- + +TmnxSubIdentString ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxSubIdentString denotes the subscriber + identification string." + SYNTAX OCTET STRING (SIZE (1..32)) + +TmnxSubIdentStringOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxSubIdentStringOrEmpty denotes the subscriber + identification string. The empty string denotes the absence of a + subscriber identification string." + SYNTAX OCTET STRING (SIZE (0..32)) + +TmnxSubProfileString ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxSubProfileString denotes the subscriber + profile string." + SYNTAX OCTET STRING (SIZE (1..16)) + +TmnxSubProfileStringOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxSubProfileStringOrEmpty denotes the subscriber + profile string. The empty string denotes the absence of a + subscriber profile." + SYNTAX OCTET STRING (SIZE (0..16)) + +TmnxSlaProfileString ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxSlaProfileString denotes the SLA + profile string." + SYNTAX OCTET STRING (SIZE (1..16)) + +TmnxSlaProfileStringOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxSlaProfileStringOrEmpty denotes the SLA + profile string. The empty string denotes the absence of a + SLA profile." + SYNTAX OCTET STRING (SIZE (0..16)) + +TmnxAppProfileString ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxAppProfileString denotes the application + profile string." + SYNTAX OCTET STRING (SIZE (1..16)) + +TmnxAppProfileStringOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxAppProfileStringOrEmpty denotes the application + profile string. The empty string denotes the absence of a + application profile." + SYNTAX OCTET STRING (SIZE (0..16)) + +TmnxSubMgtIntDestIdOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxSubMgtIntDestIdOrEmpty denotes the intermediate + destination id. The empty string denotes the absence of an + intermediate destination id." + SYNTAX OCTET STRING (SIZE (0..32)) + +TmnxSubMgtIntDestId ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxSubMgtIntDestId denotes the intermediate + destination id." + SYNTAX OCTET STRING (SIZE (1..32)) + +-- +-- Textual conventions for DHCP server +-- +TmnxDhcpOptionType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxDhcpOptionType represents how the value + of this option is encoded: + - 'ipv4 (1)': this option contains an IPv4 address (4 octets) + - 'ascii(2)': this option contains seven-bit ASCII characters + - 'hex (3)': this option contains octets. It must be displayed in + hexadecimal format because it contains non-printable + characters." + SYNTAX INTEGER { + ipv4(1), + ascii(2), + hex(3) + } + +TmnxDhcpVendorOption ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This value specifies what is encoded in the Alcatel vendor specific + sub-option of option 82." + SYNTAX BITS { + systemId (0), + clientMac (1), + serviceId (2), + sapId (3) + } + +TmnxPppoeUserNameOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "The data type TmnxPppoeUserNameOrEmpty denotes the PPPoE username." + SYNTAX OCTET STRING (SIZE (0..128)) + +-- +-- Textual conventions for Security +-- +TCpmProtPolicyID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TCpmProtPolicyID represents the identification number + of a CPM Protection policy. + + The value '0' indicates that no CPM Protection policy is provisioned." + SYNTAX Unsigned32 (0..255) + +-- +-- Textual conventions for MLPPP QoS +-- +TMlpppQoSProfileId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This textual-convention uniquely identifies MLPPP Bundle QoS + profile in the ingress and egress MLPPP QoS profile tables. + The value 0 indicates default MLPPP QoS Profile as applicable to + a given H/W" + SYNTAX Unsigned32 (0..65535) + +END |