summaryrefslogtreecommitdiff
path: root/MIBS/nokia/aos7/ALCATEL-IND1-OSPF-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-OSPF-MIB')
-rw-r--r--MIBS/nokia/aos7/ALCATEL-IND1-OSPF-MIB2147
1 files changed, 2147 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-OSPF-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-OSPF-MIB
new file mode 100644
index 0000000..932d086
--- /dev/null
+++ b/MIBS/nokia/aos7/ALCATEL-IND1-OSPF-MIB
@@ -0,0 +1,2147 @@
+ALCATEL-IND1-OSPF-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, IpAddress, Counter32, TimeTicks, Integer32,
+ Unsigned32
+ FROM SNMPv2-SMI
+ RowStatus, TEXTUAL-CONVENTION, TruthValue
+ FROM SNMPv2-TC
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ ospfIfEntry, ospfVirtIfEntry, ospfNbrEntry, ospfVirtNbrEntry,
+ ospfAreaEntry, ospfExtLsdbEntry, ospfAreaId, ospfAreaAggregateEntry
+ FROM OSPF-MIB
+ routingIND1Ospf
+ FROM ALCATEL-IND1-BASE;
+
+
+ alcatelIND1OSPFMIB MODULE-IDENTITY
+ LAST-UPDATED "201102150000Z"
+ ORGANIZATION "Alcatel-Lucent"
+ CONTACT-INFO
+ "Please consult with Customer Service to ensure the most appropriate
+ version of this document is used with the products in question:
+
+ Alcatel-Lucent, Enterprise Solutions Division
+ (Formerly Alcatel Internetworking, Incorporated)
+ 26801 West Agoura Road
+ Agoura Hills, CA 91301-5122
+ United States Of America
+
+ Telephone: North America +1 800 995 2696
+ Latin America +1 877 919 9526
+ Europe +31 23 556 0100
+ Asia +65 394 7933
+ All Other +1 818 878 4507
+
+ Electronic Mail: support@ind.alcatel.com
+ World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
+ File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
+
+ DESCRIPTION
+ "This module describes an authoritative enterprise-specific Simple
+ Network Management Protocol (SNMP) Management Information Base (MIB):
+
+ Configuration Of Global OSPF Configuration Parameters.
+
+ The right to make changes in specification and other information
+ contained in this document without prior notice is reserved.
+
+ No liability shall be assumed for any incidental, indirect, special, or
+ consequential damages whatsoever arising from or related to this
+ document or the information contained herein.
+
+ Vendors, end-users, and other interested parties are granted
+ non-exclusive license to use this specification in connection with
+ management of the products for which it is intended to be used.
+
+ Copyright (C) 1995-2007 Alcatel-Lucent
+ ALL RIGHTS RESERVED WORLDWIDE"
+
+ REVISION "200704030000Z"
+ DESCRIPTION
+ "The latest version of this MIB Module."
+
+ ::= { routingIND1Ospf 1 }
+
+
+
+ alcatelIND1OSPFMIBObjects OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch For Open Shortest Path First (OSPF)
+ Subsystem Managed Objects."
+ ::= { alcatelIND1OSPFMIB 1 }
+
+
+ alcatelIND1OSPFMIBConformance OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch For Open Shortest Path First (OSPF)
+ Subsystem Conformance Information."
+ ::= { alcatelIND1OSPFMIB 2 }
+
+
+ alcatelIND1OSPFMIBGroups OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch For Open Shortest Path First (OSPF)
+ Subsystem Units Of Conformance."
+ ::= { alcatelIND1OSPFMIBConformance 1 }
+
+
+ alcatelIND1OSPFMIBCompliances OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch For Open Shortest Path First (OSPF)
+ Subsystem Compliance Statements."
+ ::= { alcatelIND1OSPFMIBConformance 2 }
+
+
+--********************************************************************
+--************************ Textual Conventions ***********************
+--********************************************************************
+ AlaAuthenticationEncryptKey ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The authentication encryption key that is used to decypher
+ RIP simple passwords."
+ SYNTAX OCTET STRING (SIZE(16))
+
+
+-- OSPF Protocol
+
+ alaProtocolOspf OBJECT IDENTIFIER ::= { alcatelIND1OSPFMIBObjects 1 }
+
+
+ alaOspfRedistRouteTag OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 2147483647 )
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A 32-bit value tagged to each OSPF internal route that
+ is redistributed in to other routing protocol domains. The
+ lower 16-bits typically indicate the autonomous system number."
+ DEFVAL { 0 }
+ ::= { alaProtocolOspf 2 }
+
+
+ alaOspfTimerSpfDelay OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 65535 )
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Number of seconds to delay the SPF calculation after
+ receiving a topology change. This value should not be
+ greater than SPF hold time."
+ DEFVAL { 5 }
+ ::= { alaProtocolOspf 3 }
+
+
+ alaOspfTimerSpfHold OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 65535 )
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Minimum time, in seconds, between two consecutive SPF
+ calculations. This value should not be less than SPF delay time."
+ DEFVAL { 10 }
+ ::= { alaProtocolOspf 4 }
+
+
+ alaOspfRouteNumber OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of network routes in OSPF routing table."
+ ::= { alaProtocolOspf 7 }
+
+
+ alaOspfMTUCheck OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable or disable the check for MTU size in database description
+ packets. Disabled by default"
+ DEFVAL { disable }
+ ::= { alaProtocolOspf 8 }
+
+
+
+-- OSPF network route table
+
+ alaOspfRouteTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "OSPF routing table which contains the network routes."
+ ::= { alaProtocolOspf 12 }
+
+
+ alaOspfRouteEntry OBJECT-TYPE
+ SYNTAX AlaOspfRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "OSPF routing table which contains the network routes."
+ INDEX
+ {
+ alaOspfRouteDest,
+ alaOspfRouteMask,
+ alaOspfRouteTos,
+ alaOspfRouteNextHop
+ }
+ ::= { alaOspfRouteTable 1 }
+
+
+ AlaOspfRouteEntry ::= SEQUENCE
+ {
+ alaOspfRouteDest
+ IpAddress,
+ alaOspfRouteMask
+ IpAddress,
+ alaOspfRouteTos
+ Integer32,
+ alaOspfRouteNextHop
+ IpAddress,
+ alaOspfRouteIfIndex
+ Integer32,
+ alaOspfRouteType
+ INTEGER,
+ alaOspfRouteAge
+ TimeTicks,
+ alaOspfRouteTag
+ Integer32,
+ alaOspfRouteMetric1
+ Integer32,
+ alaOspfRouteMetric2
+ Integer32,
+ alaOspfRouteStatus
+ RowStatus
+ }
+
+
+ alaOspfRouteDest OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The destination IP address of this route."
+ DEFVAL { '00000000'H }
+ ::= { alaOspfRouteEntry 1 }
+
+
+ alaOspfRouteMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The network mask for this route."
+ DEFVAL { '00000000'H }
+ ::= { alaOspfRouteEntry 2 }
+
+
+ alaOspfRouteTos OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 2147483647 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type Of Service (TOS) for this route."
+ DEFVAL { 0 }
+ ::= { alaOspfRouteEntry 3 }
+
+
+ alaOspfRouteNextHop OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address of the next hop to reach this route."
+ DEFVAL { '00000000'H }
+ ::= { alaOspfRouteEntry 4 }
+
+
+ alaOspfRouteIfIndex OBJECT-TYPE
+ SYNTAX Integer32 ( -1 .. 2147483647 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ifIndex value which identifies the local
+ interface through which the next hop of this
+ route should be reached."
+ DEFVAL { 0 }
+ ::= { alaOspfRouteEntry 5 }
+
+
+ alaOspfRouteType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ intraArea(1), -- intra area route
+ interArea(2), -- inter area route
+ externalType1(3), -- external type-1 route
+ externalType2(4), -- external type-2 route
+ nssaExternalType1(5), -- external type-1 route in a NSSA
+ nssaExternalType2(6) -- external type-2 route in a NSSA
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of route."
+ DEFVAL { intraArea }
+ ::= { alaOspfRouteEntry 6 }
+
+
+ alaOspfRouteAge OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds since this route was last
+ updated or otherwise determined to be correct."
+ DEFVAL { 0 }
+ ::= { alaOspfRouteEntry 7 }
+
+
+ alaOspfRouteTag OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 2147483647 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The associated route tag for external roues. It's
+ 0 for routes internal to the autonomous system."
+ DEFVAL { 0 }
+ ::= { alaOspfRouteEntry 8 }
+
+
+ alaOspfRouteMetric1 OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 65535 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The primary routing metric for this route."
+ DEFVAL { 0 }
+ ::= { alaOspfRouteEntry 9 }
+
+
+ alaOspfRouteMetric2 OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 65535 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An alternate routing metric for this route. It's 0
+ for internal routes. For an external route, it's the metric
+ to reach the ASBR that announced the external route."
+ DEFVAL { 0 }
+ ::= { alaOspfRouteEntry 10 }
+
+
+ alaOspfRouteStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The row status variable, used according to
+ row installation and removal conventions."
+ DEFVAL { notInService }
+ ::= { alaOspfRouteEntry 11 }
+
+
+
+-- OSPF border router table
+
+ alaOspfBdrRouterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfBdrRouterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "OSPF routing table which contains the routes to border
+ (ABR and ASBR) routers."
+ ::= { alaProtocolOspf 13 }
+
+
+ alaOspfBdrRouterEntry OBJECT-TYPE
+ SYNTAX AlaOspfBdrRouterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "OSPF routing table which contains the routes to border
+ (ABR and ASBR) routers."
+ INDEX
+ {
+ alaOspfBdrRouterAreaId,
+ alaOspfBdrRouterId,
+ alaOspfBdrRouterTos,
+ alaOspfBdrRouterNextHop
+ }
+ ::= { alaOspfBdrRouterTable 1 }
+
+
+ AlaOspfBdrRouterEntry ::= SEQUENCE
+ {
+ alaOspfBdrRouterAreaId
+ IpAddress,
+ alaOspfBdrRouterId
+ IpAddress,
+ alaOspfBdrRouterTos
+ Integer32,
+ alaOspfBdrRouterNextHop
+ IpAddress,
+ alaOspfBdrRouterIfIndex
+ Integer32,
+ alaOspfBdrRouterType
+ INTEGER,
+ alaOspfBdrRouterAge
+ TimeTicks,
+ alaOspfBdrRouterMetric
+ Integer32,
+ alaOspfBdrRouterStatus
+ RowStatus
+ }
+
+
+ alaOspfBdrRouterAreaId OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The area to which the border router belongs to."
+ DEFVAL { '00000000'H }
+ ::= { alaOspfBdrRouterEntry 1 }
+
+
+ alaOspfBdrRouterId OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The router idenitifer of this border router."
+ DEFVAL { '00000000'H }
+ ::= { alaOspfBdrRouterEntry 2 }
+
+
+ alaOspfBdrRouterTos OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 2147483647 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type Of Service (TOS) for this route."
+ DEFVAL { 0 }
+ ::= { alaOspfBdrRouterEntry 3 }
+
+
+ alaOspfBdrRouterNextHop OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address of the next hop to reach this border router."
+ DEFVAL { '00000000'H }
+ ::= { alaOspfBdrRouterEntry 4 }
+
+
+ alaOspfBdrRouterIfIndex OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 2147483647 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ifIndex value which identifies the local
+ interface through which the next hop of this
+ route should be reached."
+ DEFVAL { 0 }
+ ::= { alaOspfBdrRouterEntry 5 }
+
+
+ alaOspfBdrRouterType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ abr (1), -- Area Border Router (ABR)
+ asbr (2), -- Autonomous Border Router (ASBR)
+ abrAsbr (3) -- ABR and ASBR
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of border router."
+ DEFVAL { abr }
+ ::= { alaOspfBdrRouterEntry 6 }
+
+
+ alaOspfBdrRouterAge OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds since this route was last
+ updated or otherwise determined to be correct."
+ DEFVAL { 0 }
+ ::= { alaOspfBdrRouterEntry 7 }
+
+
+ alaOspfBdrRouterMetric OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 65535 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The cost to reach the border router."
+ DEFVAL { 0 }
+ ::= { alaOspfBdrRouterEntry 8 }
+
+
+ alaOspfBdrRouterStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The row status variable, used according to
+ row installation and removal conventions."
+ DEFVAL { notInService }
+ ::= { alaOspfBdrRouterEntry 9 }
+
+
+
+-- OSPF interface-MD5 table
+-- MD5 key configuration for OSPF interfaces
+
+ alaOspfIfMd5Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfIfMd5Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPF Interface MD5 Table describes the MD5 key
+ management for OSPF interfaces."
+ ::= { alaProtocolOspf 16 }
+
+
+ alaOspfIfMd5Entry OBJECT-TYPE
+ SYNTAX AlaOspfIfMd5Entry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPF Interface MD5 Entry describes the MD5 key
+ management for OSPF interfaces."
+ INDEX { alaOspfIfMd5IpAddress, alaOspfIfMd5KeyId }
+ ::= { alaOspfIfMd5Table 1 }
+
+
+ AlaOspfIfMd5Entry ::= SEQUENCE
+ {
+ alaOspfIfMd5IpAddress
+ IpAddress,
+ alaOspfIfMd5KeyId
+ Integer32,
+ alaOspfIfMd5Key
+ OCTET STRING,
+ alaOspfIfMd5KeyStartAccept
+ TimeTicks,
+ alaOspfIfMd5KeyStopAccept
+ TimeTicks,
+ alaOspfIfMd5KeyStartGenerate
+ TimeTicks,
+ alaOspfIfMd5KeyStopGenerate
+ TimeTicks,
+ alaOspfIfMd5RowStatus
+ RowStatus,
+ alaOspfIfMd5EncryptKey
+ AlaAuthenticationEncryptKey,
+ alaOspfIfMd5AuthMode
+ INTEGER
+ }
+
+
+ alaOspfIfMd5IpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address of this OSPF MD5 key interface."
+ ::= { alaOspfIfMd5Entry 1 }
+
+ alaOspfIfMd5KeyId OBJECT-TYPE
+ SYNTAX Integer32 ( 1 .. 255 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A key identifier which identifies the algorithm and
+ MD5 secret key associated with this interface."
+ DEFVAL { 1 }
+ ::= { alaOspfIfMd5Entry 2 }
+
+
+ alaOspfIfMd5Key OBJECT-TYPE
+ SYNTAX OCTET STRING ( SIZE( 0 .. 16 ) )
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The MD5 message digest key."
+ DEFVAL { "" }
+ ::= { alaOspfIfMd5Entry 3 }
+
+
+ alaOspfIfMd5KeyStartAccept OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The time that OSPF router will start accepting packets
+ that have been created with this key."
+ DEFVAL { 0 }
+ ::= { alaOspfIfMd5Entry 4 }
+
+
+ alaOspfIfMd5KeyStopAccept OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The time that OSPF router will stop accepting packets
+ that have been created with this key."
+ DEFVAL { 0 }
+ ::= { alaOspfIfMd5Entry 5 }
+
+
+ alaOspfIfMd5KeyStartGenerate OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The time that OSPF router will start using this key for
+ packet generation."
+ DEFVAL { 0 }
+ ::= { alaOspfIfMd5Entry 6 }
+
+
+ alaOspfIfMd5KeyStopGenerate OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The time that OSPF router will stop using this key for
+ packet generation."
+ DEFVAL { 0 }
+ ::= { alaOspfIfMd5Entry 7 }
+
+
+ alaOspfIfMd5RowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Row status of this entry."
+ DEFVAL { notInService }
+ ::= { alaOspfIfMd5Entry 8 }
+
+ alaOspfIfMd5EncryptKey OBJECT-TYPE
+ SYNTAX AlaAuthenticationEncryptKey
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The MD5 message digest Encrypted key."
+ ::= { alaOspfIfMd5Entry 9 }
+
+ alaOspfIfMd5AuthMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ keyedMd5(1), -- Keyed-MD5
+ hmacSha256(2) -- HMAC-SHA-256
+ -- HMAC-SHA-384
+ -- HMAC-SHA-512
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Cryptographic authentication algorithm to be used to generate and verify
+ the message digest. The currently supported algorithms are Keyed-MD5 (RFC 2328, Appendix D)
+ and HMAC-SHA-256 (RFC 5709)."
+ DEFVAL { keyedMd5 }
+ ::= { alaOspfIfMd5Entry 10 }
+
+
+
+-- ************************************************************************
+-- Expansion of ospfIfTable
+-- ************************************************************************
+ alaOspfIfAugTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfIfAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Expansion for ospfIfTable"
+ ::= { alaProtocolOspf 17 }
+
+ alaOspfIfAugEntry OBJECT-TYPE
+ SYNTAX AlaOspfIfAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of alaOspfIfAugTable"
+ AUGMENTS { ospfIfEntry }
+ ::= { alaOspfIfAugTable 1 }
+
+ AlaOspfIfAugEntry ::=
+ SEQUENCE {
+ alaOspfIfEncryptKey AlaAuthenticationEncryptKey,
+ alaOspfIfIpMask IpAddress,
+ alaOspfIfVlanId Integer32,
+ alaOspfIfDrRouterid IpAddress,
+ alaOspfIfBdrRouterid IpAddress,
+ alaOspfIfMTU Counter32,
+ alaOspfIfInitNbrs Counter32,
+ alaOspfIfExchNbrs Counter32,
+ alaOspfIfFullNbrs Counter32,
+ alaOspfIfLinkType INTEGER,
+ alaOspfIfOperStatus INTEGER,
+ alaOspfIfIntfName SnmpAdminString,
+ alaOspfIf2WayNbrs Counter32,
+ alaOspfIfBfdStatus INTEGER,
+ alaOspfIfBfdDrsOnly INTEGER
+ }
+
+ alaOspfIfEncryptKey OBJECT-TYPE
+ SYNTAX AlaAuthenticationEncryptKey
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The authentication encryption key that is used to decypher
+ OSPF passwords."
+ ::= { alaOspfIfAugEntry 1 }
+
+ alaOspfIfIpMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP mask of this OSPF interface."
+ ::= { alaOspfIfAugEntry 2 }
+
+ alaOspfIfVlanId OBJECT-TYPE
+ SYNTAX Integer32 (0..4097)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Vlan Identifier associated with this interface"
+ ::= { alaOspfIfAugEntry 3 }
+
+ alaOspfIfDrRouterid OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Router Id of Designated router for this interface"
+ ::= { alaOspfIfAugEntry 4 }
+
+ alaOspfIfBdrRouterid OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Router Id of Backup Designated router for this interface"
+ ::= { alaOspfIfAugEntry 5 }
+
+ alaOspfIfMTU OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Max Transfer size of OSPF packets on this interface"
+ ::= { alaOspfIfAugEntry 6 }
+
+ alaOspfIfInitNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of ospf INIT state neighbors on this interface"
+ ::= { alaOspfIfAugEntry 7 }
+
+ alaOspfIfExchNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of ospf EXCHANGE state neighbors on this interface"
+ ::= { alaOspfIfAugEntry 8 }
+
+ alaOspfIfFullNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of ospf FULL state neighbors on this interface"
+ ::= { alaOspfIfAugEntry 9 }
+
+ alaOspfIfLinkType OBJECT-TYPE
+ SYNTAX INTEGER {
+ broadcast (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of physical medium used for transmission of OSPF packets"
+ ::= { alaOspfIfAugEntry 10 }
+
+ alaOspfIfOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (0),
+ up (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Operational status of this interface"
+ ::= { alaOspfIfAugEntry 11 }
+
+ alaOspfIfIntfName OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The user defined name used to identify the IP interface"
+ ::= { alaOspfIfAugEntry 12 }
+
+ alaOspfIf2WayNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of ospf 2-WAY state neighbors on this interface"
+ ::= { alaOspfIfAugEntry 13 }
+
+ alaOspfIfBfdStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enables/Disables OSPF for a BFD interface"
+ ::= { alaOspfIfAugEntry 14}
+
+ alaOspfIfBfdDrsOnly OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enables/Disables Drs Only option for a BFD interface"
+ ::= { alaOspfIfAugEntry 15}
+
+
+-- ************************************************************************
+-- Expansion of ospfVirtIfTable
+-- ************************************************************************
+ alaOspfVirtIfAugTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfVirtIfAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Expansion for ospfVirtIfTable"
+ ::= { alaProtocolOspf 18 }
+
+ alaOspfVirtIfAugEntry OBJECT-TYPE
+ SYNTAX AlaOspfVirtIfAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry of alaOspfVirtIfAugTable"
+ AUGMENTS { ospfVirtIfEntry }
+ ::= { alaOspfVirtIfAugTable 1 }
+
+ AlaOspfVirtIfAugEntry ::=
+ SEQUENCE {
+ alaOspfVirtIfEncryptKey AlaAuthenticationEncryptKey,
+ alaOspfVirtIfOperStatus INTEGER
+ }
+
+ alaOspfVirtIfEncryptKey OBJECT-TYPE
+ SYNTAX AlaAuthenticationEncryptKey
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The authentication encryption key that is used to decypher
+ OSPF passwords."
+ ::= { alaOspfVirtIfAugEntry 1 }
+
+ alaOspfVirtIfOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down (0),
+ up (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Operational status of the virtual link"
+ ::= { alaOspfVirtIfAugEntry 2 }
+
+
+-- ************************************************************************
+-- Extensions for OSPF Graceful Restart
+-- ************************************************************************
+
+ alaOspfRestartHelperSupport OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The router's support for acting as an OSPF hitless restart helper."
+ DEFVAL { enable }
+ ::= { alaProtocolOspf 19 }
+
+ alaOspfRestartHelperStrictLSAChecking OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates whether or not a changed LSA will result in termination
+ of graceful restart by a helping router.
+ Deprecated with IETF object ospfRestartStrictLsaChecking"
+ DEFVAL { enable }
+ ::= { alaProtocolOspf 20 }
+
+ alaOspfRestartHelperStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ helping(1),
+ notHelping(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this OSPF router is operating as a Helper to a
+ restarting router."
+ ::= { alaProtocolOspf 21 }
+
+-- These variables are currently part of the IETF draft MIB. So, they should
+-- eventually go into ospfGeneralGroup of the standard MIB later.
+-- BEGIN
+
+ alaOspfRFC1583Compatibility OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only -- read-write in IETF_OSPF.mib
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates metrics used to choose among multiple AS-
+ external-LSAs. When RFC1583Compatibility is set to
+ enabled, only cost will be used when choosing among
+ multiple AS-external-LSAs advertising the same
+ destination. When RFC1583Compatibility is set to
+ disabled, preference will be driven first by type of
+ path using cost only to break ties.
+ Deprecated by IETF standard object ospfRFC1583Compatibility"
+ REFERENCE
+ "OSPF Version 2, Section 16.4.1 External path preferences"
+ ::= { alaProtocolOspf 22 }
+
+ alaOspfOpaqueLsaSupport OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The router's support for Opaque LSA types."
+ REFERENCE
+ "The OSPF Opaque LSA Option"
+ ::= { alaProtocolOspf 23 }
+
+ alaOspfTrafficEngineeringSupport OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only -- read-write in IETF_OSPF.mib
+ STATUS current
+ DESCRIPTION
+ "The router's support for OSPF traffic engineering."
+ ::= { alaProtocolOspf 24 }
+
+ alaOspfReferenceBandwidth OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only -- read-write in IETF_OSPF.mib
+ STATUS deprecated
+ DESCRIPTION
+ "Reference bandwidth in kilobits/second for
+ calculating default interface metrics. The
+ default value is 100,000 KBPS (100 MBPS)
+ deprecated by IETF mib object ospfReferenceBandwidth"
+ ::= { alaProtocolOspf 25 }
+
+ alaOspfRestartSupport OBJECT-TYPE
+ SYNTAX INTEGER { none (1),
+ plannedOnly (2),
+ plannedAndUnplanned (3)
+ }
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The router's support for OSPF hitless restart.
+ Options include: no restart support, only planned
+ restarts or both planned and unplanned restarts.
+ Deprecated by IETF object ospfRestartSupport"
+ ::= { alaProtocolOspf 26 }
+
+ alaOspfRestartInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..1800)
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Configured OSPF hitless restart timeout interval.
+ Deprecated by IETF mib ospfRestartInterval"
+ ::= { alaProtocolOspf 27 }
+
+ alaOspfRestartStatus OBJECT-TYPE
+ SYNTAX INTEGER { notRestarting (1),
+ plannedRestart (2),
+ unplannedRestart (3)
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Current status of OSPF hitless restart. The status of hitless restart is
+ unplannedRestart after a CMM takeover. Before CMM takeover, the status is
+ plannedRestart."
+ ::= { alaProtocolOspf 28 }
+
+ alaOspfRestartAge OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Remaining time in current OSPF hitless restart
+ interval.
+ Deprecated by alaOspfRestartAge"
+ ::= { alaProtocolOspf 29 }
+
+ alaOspfRestartExitReason OBJECT-TYPE
+ SYNTAX INTEGER { none (1), -- none attempted
+ inProgress (2), -- restart in
+ -- progress
+ completed (3), -- successfully
+ -- completed
+ timedOut (4), -- timed out
+ topologyChanged (5) -- aborted due to
+ -- topology change.
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Describes the outcome of the last attempt at a
+ hitless restart. If the value is 'none', no restart
+ has yet been attempted. If the value is 'inProgress',
+ a restart attempt is currently underway.
+ Deprecated by IETF object ospfRestartExitReason"
+ ::= { alaProtocolOspf 30 }
+
+-- END
+
+-- ************************************************************************
+-- Extensions to ospfNbrTable
+-- ************************************************************************
+-- Some of these expansions (graceful restart) should eventually go into the
+-- IETF_OSPF.mib once the draft becomes an RFC. For now, we augment the standard
+-- MIB table entry and extend support for graceful restart variables.
+-- BEGIN
+
+ alaOspfNbrAugTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfNbrAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Extensions to the ospfNbrTable"
+ ::= { alaProtocolOspf 31 }
+
+ alaOspfNbrAugEntry OBJECT-TYPE
+ SYNTAX AlaOspfNbrAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Additions to neighbor table"
+ AUGMENTS { ospfNbrEntry }
+ ::= { alaOspfNbrAugTable 1 }
+
+ AlaOspfNbrAugEntry ::=
+ SEQUENCE {
+ alaOspfNbrRestartHelperStatus INTEGER,
+ alaOspfNbrRestartHelperAge Unsigned32,
+ alaOspfNbrRestartHelperExitReason INTEGER,
+ alaOspfNbrAreaId IpAddress,
+ alaOspfNbrDrAddress IpAddress,
+ alaOspfNbrBdrAddress IpAddress,
+ alaOspfNbrType INTEGER,
+ alaOspfNbrMode INTEGER,
+ alaOspfNbrMd5SeqNo Counter32,
+ alaOspfNbrLastHello Counter32,
+ alaOspfNbrPendingLSreq Counter32,
+ alaOspfNbrPendingLSack Counter32,
+ alaOspfNbrPendingLSupd Counter32
+ }
+
+ alaOspfNbrRestartHelperStatus OBJECT-TYPE
+ SYNTAX INTEGER { notHelping (1),
+ helping (2)
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates whether the router is acting
+ as a hitless restart helper for the neighbor."
+ ::= { alaOspfNbrAugEntry 1 }
+
+ alaOspfNbrRestartHelperAge OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Remaining time in current OSPF hitless restart
+ interval, if the router is acting as a restart
+ helper for the neighbor."
+ ::= { alaOspfNbrAugEntry 2 }
+
+
+ alaOspfNbrRestartHelperExitReason OBJECT-TYPE
+ SYNTAX INTEGER { none (1), -- not attempted
+ inProgress (2), -- restart in
+ -- progress
+ completed (3), -- successfully
+ -- completed
+ timedOut (4), -- timed out
+ topologyChanged (5) -- aborted due to
+ -- topology
+ -- change.
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Describes the outcome of the last attempt at acting
+ as a hitless restart helper for the neighbor."
+ ::= { alaOspfNbrAugEntry 3 }
+
+ alaOspfNbrAreaId OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The area to which this neighbor belongs"
+ ::= { alaOspfNbrAugEntry 4 }
+
+ alaOspfNbrDrAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Designated router of this neighbor"
+ ::= { alaOspfNbrAugEntry 5 }
+
+ alaOspfNbrBdrAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Backup Designated router of this neighbor"
+ ::= { alaOspfNbrAugEntry 6 }
+
+ alaOspfNbrType OBJECT-TYPE
+ SYNTAX INTEGER { dynamic (1),
+ static (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Neighbors learned via the OSPF Hello protocol are dynamic.
+ Configured neighbors are static"
+ ::= { alaOspfNbrAugEntry 7 }
+
+ alaOspfNbrMode OBJECT-TYPE
+ SYNTAX INTEGER { slave(1),
+ master (2),
+ slaveHold(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current neighbor mode. This is applicable only during adjacency formation"
+ ::= { alaOspfNbrAugEntry 8 }
+
+ alaOspfNbrMd5SeqNo OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sequence number used in Md5 authentication"
+ ::= { alaOspfNbrAugEntry 9 }
+
+ alaOspfNbrLastHello OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "No of seconds elapsed since the last hello was received from this neighbor"
+ ::= { alaOspfNbrAugEntry 10 }
+
+ alaOspfNbrPendingLSreq OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of outstanding link state requests to be sent to this neighbor"
+ ::= { alaOspfNbrAugEntry 11 }
+
+ alaOspfNbrPendingLSack OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of outstanding link state acknowledgements to be sent to this neighbor"
+ ::= { alaOspfNbrAugEntry 12 }
+
+ alaOspfNbrPendingLSupd OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of outstanding link state update packets to be sent to this neighbor"
+ ::= { alaOspfNbrAugEntry 13 }
+
+
+
+-- ************************************************************************
+-- Extensions to ospfVirtNbrTable
+-- ************************************************************************
+ alaOspfVirtNbrAugTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfVirtNbrAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Extensions to ospfVirtNbrTable"
+ ::= { alaProtocolOspf 32 }
+
+ alaOspfVirtNbrAugEntry OBJECT-TYPE
+ SYNTAX AlaOspfVirtNbrAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information regarding a single virtual neighbor."
+ REFERENCE
+ "OSPF Version 2 Management Information Base, Work In Progress
+ draft-ietf-ospf-mib-update-07.txt Section B.4"
+ AUGMENTS { ospfVirtNbrEntry }
+ ::= { alaOspfVirtNbrAugTable 1 }
+
+ AlaOspfVirtNbrAugEntry ::=
+ SEQUENCE {
+ alaOspfVirtNbrRestartHelperStatus INTEGER,
+ alaOspfVirtNbrRestartHelperAge Unsigned32,
+ alaOspfVirtNbrRestartHelperExitReason INTEGER,
+ alaOspfVirtNbrDrAddr IpAddress,
+ alaOspfVirtNbrBdrAddr IpAddress,
+ alaOspfVirtNbrMode INTEGER,
+ alaOspfVirtNbrMd5SeqNo Counter32,
+ alaOspfVirtNbrLastHello Counter32,
+ alaOspfVirtNbrPendingLSreq Counter32,
+ alaOspfVirtNbrPendingLSack Counter32,
+ alaOspfVirtNbrPendingLSupd Counter32
+ }
+
+ alaOspfVirtNbrRestartHelperStatus OBJECT-TYPE
+ SYNTAX INTEGER { notHelping (1),
+ helping (2)
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates whether the router is acting
+ as a hitless restart helper for the neighbor."
+ ::= { alaOspfVirtNbrAugEntry 1 }
+
+ alaOspfVirtNbrRestartHelperAge OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Remaining time in current OSPF hitless restart
+ interval, if the router is acting as a restart
+ helper for the neighbor."
+ ::= { alaOspfVirtNbrAugEntry 2 }
+
+ alaOspfVirtNbrRestartHelperExitReason OBJECT-TYPE
+ SYNTAX INTEGER { none (1), -- not attempted
+ inProgress (2), -- restart in
+ -- progress
+ completed (3), -- successfully
+ -- completed
+ timedOut (4), -- timed out
+ topologyChanged (5) -- aborted due to
+ -- topology
+ -- change.
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Describes the outcome of the last attempt at acting
+ as a hitless restart helper for the neighbor."
+ ::= { alaOspfVirtNbrAugEntry 3 }
+
+ alaOspfVirtNbrDrAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Designated router of this virtual neighbor"
+ ::= { alaOspfVirtNbrAugEntry 4 }
+
+ alaOspfVirtNbrBdrAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Backup Designated router of this virtual neighbor"
+ ::= { alaOspfVirtNbrAugEntry 5 }
+
+ alaOspfVirtNbrMode OBJECT-TYPE
+ SYNTAX INTEGER { slave(1),
+ master (2),
+ slaveHold(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current neighbor mode. This is applicable only during adjacency formation"
+ ::= { alaOspfVirtNbrAugEntry 6 }
+
+ alaOspfVirtNbrMd5SeqNo OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Sequence number used in Md5 authentication"
+ ::= { alaOspfVirtNbrAugEntry 7 }
+
+ alaOspfVirtNbrLastHello OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "No of seconds elapsed since the last hello was received from this neighbor"
+ ::= { alaOspfVirtNbrAugEntry 8 }
+
+ alaOspfVirtNbrPendingLSreq OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of outstanding link state requests to be sent to this neighbor"
+ ::= { alaOspfVirtNbrAugEntry 9 }
+
+ alaOspfVirtNbrPendingLSack OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of outstanding link state acknowledgements to be sent to this neighbor"
+ ::= { alaOspfVirtNbrAugEntry 10 }
+
+ alaOspfVirtNbrPendingLSupd OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of outstanding link state update packets to be sent to this neighbor"
+ ::= { alaOspfVirtNbrAugEntry 11 }
+
+-- END
+
+ alaOspfRestartInitiate OBJECT-TYPE
+ SYNTAX INTEGER { notRestarting (1), -- not attempted
+ plannedRestart (2) -- initiate restart
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Initiates a planned graceful restart, if set to plannedRestart."
+ ::= { alaProtocolOspf 33 }
+
+-- ************************************************************************
+-- Expansion of ospfGeneralGroup
+-- ************************************************************************
+ alaOspfGeneralTable OBJECT IDENTIFIER ::= { alcatelIND1OSPFMIBObjects 3 }
+
+ alaOspfTotalSpfRuns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of SPF runs performed on this router"
+ ::= { alaOspfGeneralTable 1 }
+
+ alaOspfTotalIncrSpfRuns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total number of Incremental SPF runs performed on this router"
+ ::= { alaOspfGeneralTable 2 }
+
+ alaOspfTotalInitNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of INIT state neighbors on this router"
+ ::= { alaOspfGeneralTable 3 }
+
+ alaOspfTotalExchNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of EXCHANGE state neighbors on this router"
+ ::= { alaOspfGeneralTable 4 }
+
+ alaOspfTotalFullNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of FULL state neighbors on this router"
+ ::= { alaOspfGeneralTable 5 }
+
+ alaOspfTotalAreas OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total Number of areas configured on this router"
+ ::= { alaOspfGeneralTable 6 }
+
+ alaOspfTotalActiveAreas OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total Number of active areas configured on this router"
+ ::= { alaOspfGeneralTable 7 }
+
+ alaOspfTotalTransitAreas OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of transit areas on this router"
+ ::= { alaOspfGeneralTable 8 }
+
+ alaOspfTotalNSSA OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total Number of NSSA areas on this router"
+ ::= { alaOspfGeneralTable 9 }
+
+ alaOspfTotal2wayNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of 2-way state neighbors on this router"
+ ::= { alaOspfGeneralTable 10 }
+
+
+-- ************************************************************************
+-- Expansion to ospfAreaTable
+-- ************************************************************************
+ alaOspfAreaAugTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfAreaAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Extensions to ospfAreaTable"
+ ::= { alaProtocolOspf 35 }
+
+ alaOspfAreaAugEntry OBJECT-TYPE
+ SYNTAX AlaOspfAreaAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Area table additions"
+ AUGMENTS { ospfAreaEntry }
+ ::= { alaOspfAreaAugTable 1 }
+
+ AlaOspfAreaAugEntry ::=
+ SEQUENCE {
+ alaOspfAreaOperStatus INTEGER,
+ alaOspfAreaLastSpfRun Counter32,
+ alaOspfAreaActiveVlinks Counter32,
+ alaOspfAreaIncrSpfRuns Counter32,
+ alaOspfAreaInitNbrs Counter32,
+ alaOspfAreaExchNbrs Counter32,
+ alaOspfAreaFullNbrs Counter32,
+ alaOspfAreaNumIntfs Counter32,
+ alaOspfAreaAttachedIntfs OCTET STRING,
+ alaOspfArea2WayNbrs Counter32,
+ alaOspfAreaNssaTranslatorRole INTEGER,
+ alaOspfAreaNssaTranslatorStabilityInterval Integer32,
+ alaOspfAreaNssaImportSetPbit INTEGER,
+ alaOspfAreaNssaTranslatorState INTEGER,
+ alaOspfAreaNssaElectedTranslatorRouterId IpAddress
+ }
+
+ alaOspfAreaOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ inactive(1),
+ up (2),
+ down (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Operational status of the area"
+ ::= { alaOspfAreaAugEntry 1 }
+
+ alaOspfAreaLastSpfRun OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time in secs since last SPF ran for this area"
+ ::= { alaOspfAreaAugEntry 2 }
+
+ alaOspfAreaActiveVlinks OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of active virtual links in this area"
+ ::= { alaOspfAreaAugEntry 3 }
+
+ alaOspfAreaIncrSpfRuns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times that incremental SPF has been run for this area to
+ calculate inter-area routes"
+ ::= { alaOspfAreaAugEntry 4 }
+
+ alaOspfAreaInitNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of ospf INIT state neighbors in this area"
+ ::= { alaOspfAreaAugEntry 5 }
+
+ alaOspfAreaExchNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of ospf EXCHANGE state neighbors in this area"
+ ::= { alaOspfAreaAugEntry 6 }
+
+ alaOspfAreaFullNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of ospf FULL state neighbors in this area"
+ ::= { alaOspfAreaAugEntry 7 }
+
+ alaOspfAreaNumIntfs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of interfaces in this area"
+ ::= { alaOspfAreaAugEntry 8 }
+
+ alaOspfAreaAttachedIntfs OBJECT-TYPE
+ SYNTAX OCTET STRING ( SIZE (0 .. 2200) )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "List of interfaces attached to this area"
+ ::= { alaOspfAreaAugEntry 9 }
+
+ alaOspfArea2WayNbrs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of ospf 2-WAY state neighbors in this area"
+ ::= { alaOspfAreaAugEntry 10 }
+
+ alaOspfAreaNssaTranslatorRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ always(1),
+ candidate(2),
+ none(3)
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Specifies whether or not an NSSA border router will unconditionally translate
+ Type-7 LSAs into Type-5 LSAs. When set to always, an NSSA border router always
+ translates Type-7 LSAs into Type-5 LSAs regardless of the translator state of
+ other NSSA border routers. When set to candidate, an NSSA border router participates
+ in the translator election process. For non-NSSA border routers, this value is none."
+ DEFVAL { candidate }
+ ::= { alaOspfAreaAugEntry 11 }
+
+ alaOspfAreaNssaTranslatorStabilityInterval OBJECT-TYPE
+ SYNTAX Integer32 (0..120)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Defines the length of time (in seconds) an elected Type-7 translator will continue
+ to perform its translator duties once it has determined that its translator status
+ has been deposed by another NSSA border router translator. For non-NSSA border routers,
+ this value is not defined and will be 0."
+ DEFVAL { 40 }
+ ::= { alaOspfAreaAugEntry 12 }
+
+ alaOspfAreaNssaImportSetPbit OBJECT-TYPE
+ SYNTAX INTEGER {
+ propagate(1),
+ doNotPropagate(2),
+ none(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies whether or not an NSSA AS boundary router sets the P-bit when external
+ routes are imported into the NSSA as Type-7 LSAs. For non-NSSA boundary routers,
+ this value is not defined and will be none."
+ DEFVAL { propagate }
+ ::= { alaOspfAreaAugEntry 13 }
+
+ alaOspfAreaNssaTranslatorState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ elected(2),
+ disabled(3),
+ none(4)
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The state of the NSSA Translator, for NSSA border routers. For non-NSSA border
+ routers, the state is none."
+ ::= { alaOspfAreaAugEntry 14 }
+
+ alaOspfAreaNssaElectedTranslatorRouterId OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The elected/current NSSA translator router id elected by this NSSA border router.
+ For non-NSSA border router, this object is not defined."
+ ::= { alaOspfAreaAugEntry 15 }
+
+
+-- ************************************************************************
+-- Expansion to ospfExtLsdbTable
+-- ************************************************************************
+ alaOspfExtLsdbAugTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfExtLsdbAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Extensions to ospfExtLsdbTable"
+ ::= { alaProtocolOspf 36 }
+
+ alaOspfExtLsdbAugEntry OBJECT-TYPE
+ SYNTAX AlaOspfExtLsdbAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "External Link state database additions"
+ AUGMENTS { ospfExtLsdbEntry }
+ ::= { alaOspfExtLsdbAugTable 1 }
+
+ AlaOspfExtLsdbAugEntry ::=
+ SEQUENCE {
+ alaOspfExtLsdbProto INTEGER,
+ alaOspfExtLsdbRouteTag Counter32,
+ alaOspfExtLsdbFwdAddr IpAddress,
+ alaOspfExtLsdbMetricType INTEGER,
+ alaOspfExtLsdbMetric Integer32,
+ alaOspfExtLsdbLength Integer32,
+ alaOspfExtLsdbMask IpAddress
+ }
+
+ alaOspfExtLsdbProto OBJECT-TYPE
+ SYNTAX INTEGER {
+ local (1),
+ static (2),
+ direct(3),
+ rip (4),
+ ospf(5),
+ isis (6),
+ bgp (7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Protocol through which this external LSA was learnt"
+ ::= { alaOspfExtLsdbAugEntry 1 }
+
+ alaOspfExtLsdbRouteTag OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit value attached to each external route."
+ ::= { alaOspfExtLsdbAugEntry 2 }
+
+ alaOspfExtLsdbFwdAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address to which data traffic for the advertised destination is to be forwarded.
+ If the Forwarding address is set to 0.0.0.0, data traffic is to be forwarded to the
+ LSA's originator."
+ ::= { alaOspfExtLsdbAugEntry 3 }
+
+ alaOspfExtLsdbMetricType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ type1(1), -- comparable cost
+ type2(2) -- non-comparable cost
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of external metric."
+ ::= { alaOspfExtLsdbAugEntry 4 }
+
+ alaOspfExtLsdbMetric OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The OSPF External TOS 0 Metric."
+ ::= { alaOspfExtLsdbAugEntry 5 }
+
+ alaOspfExtLsdbLength OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The length of the AS External Link-State Advertisement."
+ ::= { alaOspfExtLsdbAugEntry 6 }
+
+ alaOspfExtLsdbMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address mask for the advertised destination."
+ ::= { alaOspfExtLsdbAugEntry 7 }
+
+
+-- ************************************************************************
+
+-- Expansion to ospfAreaAggregateTable
+-- ************************************************************************
+ alaOspfAreaAggregateAugTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaOspfAreaAggregateAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Extensions to ospfAreaAggregateTable"
+ ::= { alaProtocolOspf 38 }
+
+ alaOspfAreaAggregateAugEntry OBJECT-TYPE
+ SYNTAX AlaOspfAreaAggregateAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Additions to the area aggregate table"
+ AUGMENTS { ospfAreaAggregateEntry }
+ ::= { alaOspfAreaAggregateAugTable 1 }
+
+ AlaOspfAreaAggregateAugEntry ::=
+ SEQUENCE {
+ alaOspfAreaAggregateMetric Integer32
+ }
+
+ alaOspfAreaAggregateMetric OBJECT-TYPE
+ SYNTAX Integer32 ( 0 .. 65535 )
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If set, this value is used as the metric for the area aggregate route,
+ overriding the calculated metric"
+ DEFVAL { 0 }
+ ::= { alaOspfAreaAggregateAugEntry 1 }
+
+-- END
+
+ alaOspfDefaultOriginate OBJECT-TYPE
+ SYNTAX INTEGER { none (1),
+ only (2),
+ always (3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this ASBR router originates the default route
+ into the OSPF normal area(s). If set to 'only', the default route
+ is advertised into the OSPF normal area, provided the ASBR has
+ a route to 0.0.0.0/0 in its routing table. Alternatively, if set
+ to 'always', a default route is advertised into the OSPF domain
+ regardless of whether the ASBR has a route to 0.0.0.0/0. A value of
+ 'none' has the effect of not originating the default route."
+ DEFVAL { none }
+ ::= { alaProtocolOspf 39 }
+
+ alaOspfDefaultOriginateMetricType OBJECT-TYPE
+ SYNTAX INTEGER { type1 (1), -- comparable cost
+ type2 (2) -- non-comparable cost
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Type of metric to be used with the default route."
+ DEFVAL { type2 }
+ ::= { alaProtocolOspf 40 }
+
+ alaOspfDefaultOriginateMetric OBJECT-TYPE
+ SYNTAX Integer32 ( 1 .. 65535 )
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Default metric to be used for the default route."
+ DEFVAL { 1 }
+ ::= { alaProtocolOspf 41 }
+
+ alaOspfBfdStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables bfd for OSPF protocol"
+ DEFVAL { disable }
+ ::= { alaProtocolOspf 42}
+
+ alaOspfBfdAllInterfaceStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables bfd for all OSPF interfaces"
+ DEFVAL { disable }
+ ::= { alaProtocolOspf 43}
+
+ alaOspfOpaqueTransitCapability OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables opaque LSA accept and retransmit capability for OSPF"
+ DEFVAL { enable }
+ ::= { alaProtocolOspf 44}
+
+
+
+--
+-- Compliance Statements
+--
+
+ alcatelIND1OSPFMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "Compliance statement for
+ Open Shortest Path First (OSPF) Subsystem."
+ MODULE -- this module
+
+ MANDATORY-GROUPS
+ {
+ alaOspfMiscellaneousGroup,
+ alaOspfRouteGroup,
+ alaOspfBdrRouterGroup,
+ alaOspfIfMd5Group,
+ alaOspfGeneralGroup,
+ alaOspfAreaAugEntryGroup,
+ alaOspfAreaAggregateAugEntryGroup,
+ alaOspfIfAugGroup,
+ alaOspfExtLsdbAugGroup,
+ alaOspfNbrAugGroup
+ }
+
+ ::= { alcatelIND1OSPFMIBCompliances 1 }
+
+
+--
+-- Units Of Conformance
+--
+
+ alaOspfMiscellaneousGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaOspfRedistRouteTag,
+ alaOspfTimerSpfDelay,
+ alaOspfTimerSpfHold,
+ alaOspfRouteNumber,
+ alaOspfMTUCheck,
+ alaOspfBfdStatus,
+ alaOspfBfdAllInterfaceStatus,
+ alaOspfRestartHelperSupport,
+ alaOspfRestartHelperStrictLSAChecking,
+ alaOspfRestartHelperStatus,
+ alaOspfRFC1583Compatibility,
+ alaOspfOpaqueLsaSupport,
+ alaOspfTrafficEngineeringSupport,
+ alaOspfReferenceBandwidth,
+ alaOspfRestartSupport,
+ alaOspfRestartInterval,
+ alaOspfRestartStatus,
+ alaOspfRestartAge,
+ alaOspfRestartExitReason,
+ alaOspfDefaultOriginate,
+ alaOspfDefaultOriginateMetricType,
+ alaOspfDefaultOriginateMetric,
+ alaOspfRestartInitiate,
+ alaOspfOpaqueTransitCapability
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of Miscellaneous objects for management of OSPF."
+ ::= { alcatelIND1OSPFMIBGroups 1 }
+
+
+ alaOspfRouteGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaOspfRouteDest, -- Network Route table
+ alaOspfRouteMask,
+ alaOspfRouteTos,
+ alaOspfRouteNextHop,
+ alaOspfRouteIfIndex,
+ alaOspfRouteType,
+ alaOspfRouteAge,
+ alaOspfRouteTag,
+ alaOspfRouteMetric1,
+ alaOspfRouteMetric2,
+ alaOspfRouteStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of Network Route configuration."
+ ::= { alcatelIND1OSPFMIBGroups 4 }
+
+
+ alaOspfBdrRouterGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaOspfBdrRouterAreaId, -- Border Router table
+ alaOspfBdrRouterId,
+ alaOspfBdrRouterTos,
+ alaOspfBdrRouterNextHop,
+ alaOspfBdrRouterIfIndex,
+ alaOspfBdrRouterType,
+ alaOspfBdrRouterAge,
+ alaOspfBdrRouterMetric,
+ alaOspfBdrRouterStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of routes to Border Routers."
+ ::= { alcatelIND1OSPFMIBGroups 5 }
+
+
+ alaOspfIfMd5Group OBJECT-GROUP
+ OBJECTS
+ {
+ alaOspfIfMd5IpAddress, -- Interface MD5 table
+ alaOspfIfMd5KeyId,
+ alaOspfIfMd5Key,
+ alaOspfIfMd5KeyStartAccept,
+ alaOspfIfMd5KeyStopAccept,
+ alaOspfIfMd5KeyStartGenerate,
+ alaOspfIfMd5KeyStopGenerate,
+ alaOspfIfMd5RowStatus,
+ alaOspfIfMd5EncryptKey,
+ alaOspfIfMd5AuthMode
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of Interface MD5 configuration."
+ ::= { alcatelIND1OSPFMIBGroups 8 }
+
+ alaOspfGeneralGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaOspfTotalSpfRuns,
+ alaOspfTotalIncrSpfRuns,
+ alaOspfTotalInitNbrs,
+ alaOspfTotalExchNbrs,
+ alaOspfTotalFullNbrs,
+ alaOspfTotalAreas,
+ alaOspfTotalActiveAreas,
+ alaOspfTotalTransitAreas,
+ alaOspfTotalNSSA,
+ alaOspfTotal2wayNbrs
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of Interface MD5 configuration."
+ ::= { alcatelIND1OSPFMIBGroups 9 }
+
+ alaOspfAreaAugEntryGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaOspfAreaOperStatus,
+ alaOspfAreaLastSpfRun,
+ alaOspfAreaActiveVlinks,
+ alaOspfAreaIncrSpfRuns,
+ alaOspfAreaInitNbrs,
+ alaOspfAreaExchNbrs,
+ alaOspfAreaFullNbrs,
+ alaOspfAreaNumIntfs,
+ alaOspfAreaAttachedIntfs,
+ alaOspfArea2WayNbrs,
+ alaOspfAreaNssaTranslatorRole,
+ alaOspfAreaNssaTranslatorStabilityInterval,
+ alaOspfAreaNssaImportSetPbit,
+ alaOspfAreaNssaTranslatorState,
+ alaOspfAreaNssaElectedTranslatorRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "Extensions to ospfAreaTable."
+ ::= { alcatelIND1OSPFMIBGroups 10 }
+
+alaOspfAreaAggregateAugEntryGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaOspfAreaAggregateMetric
+ }
+ STATUS current
+ DESCRIPTION
+ "Extensions to ospfAreaAggregateTable."
+ ::= { alcatelIND1OSPFMIBGroups 11 }
+
+alaOspfIfAugGroup OBJECT-GROUP
+ OBJECTS {
+ alaOspfIfEncryptKey ,
+ alaOspfIfIpMask ,
+ alaOspfIfVlanId ,
+ alaOspfIfDrRouterid ,
+ alaOspfIfBdrRouterid ,
+ alaOspfIfMTU ,
+ alaOspfIfInitNbrs ,
+ alaOspfIfExchNbrs ,
+ alaOspfIfFullNbrs ,
+ alaOspfIfLinkType ,
+ alaOspfIfOperStatus ,
+ alaOspfIfIntfName ,
+ alaOspfIf2WayNbrs ,
+ alaOspfIfBfdStatus ,
+ alaOspfIfBfdDrsOnly
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of Interface configuration."
+ ::= { alcatelIND1OSPFMIBGroups 12 }
+
+alaOspfExtLsdbAugGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaOspfExtLsdbProto,
+ alaOspfExtLsdbRouteTag,
+ alaOspfExtLsdbFwdAddr,
+ alaOspfExtLsdbMetricType,
+ alaOspfExtLsdbMetric,
+ alaOspfExtLsdbLength,
+ alaOspfExtLsdbMask
+ }
+ STATUS current
+ DESCRIPTION
+ "Objects of ospf ExtLsdb Aug Group."
+ ::= { alcatelIND1OSPFMIBGroups 13 }
+
+alaOspfNbrAugGroup OBJECT-GROUP
+ OBJECTS {
+ alaOspfNbrRestartHelperStatus ,
+ alaOspfNbrRestartHelperAge ,
+ alaOspfNbrRestartHelperExitReason ,
+ alaOspfNbrAreaId ,
+ alaOspfNbrDrAddress ,
+ alaOspfNbrBdrAddress ,
+ alaOspfNbrType ,
+ alaOspfNbrMode ,
+ alaOspfNbrMd5SeqNo ,
+ alaOspfNbrLastHello ,
+ alaOspfNbrPendingLSreq ,
+ alaOspfNbrPendingLSack ,
+ alaOspfNbrPendingLSupd
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of OspfNbr configuration."
+ ::= { alcatelIND1OSPFMIBGroups 14 }
+
+alaOspfVirtIfAugGroup OBJECT-GROUP
+ OBJECTS {
+ alaOspfVirtIfEncryptKey ,
+ alaOspfVirtIfOperStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of Virtual Interface configuration."
+ ::= { alcatelIND1OSPFMIBGroups 15 }
+
+alaOspfVirtNbrAugGroup OBJECT-GROUP
+ OBJECTS {
+ alaOspfVirtNbrRestartHelperStatus ,
+ alaOspfVirtNbrRestartHelperAge ,
+ alaOspfVirtNbrRestartHelperExitReason ,
+ alaOspfVirtNbrDrAddr ,
+ alaOspfVirtNbrBdrAddr ,
+ alaOspfVirtNbrMode ,
+ alaOspfVirtNbrMd5SeqNo ,
+ alaOspfVirtNbrLastHello ,
+ alaOspfVirtNbrPendingLSreq ,
+ alaOspfVirtNbrPendingLSack ,
+ alaOspfVirtNbrPendingLSupd
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of Virtual Neighbor configuration."
+ ::= { alcatelIND1OSPFMIBGroups 16 }
+
+END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 15:31:16 +0000