diff options
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-LAG-MIB')
| -rw-r--r-- | MIBS/nokia/aos7/ALCATEL-IND1-LAG-MIB | 2742 |
1 files changed, 2742 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-LAG-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-LAG-MIB new file mode 100644 index 0000000..5e25d08 --- /dev/null +++ b/MIBS/nokia/aos7/ALCATEL-IND1-LAG-MIB @@ -0,0 +1,2742 @@ + + ALCATEL-IND1-LAG-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE, Counter32, Counter64, Integer32, TimeTicks + FROM SNMPv2-SMI + MacAddress, TEXTUAL-CONVENTION, RowStatus + FROM SNMPv2-TC + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + InterfaceIndex + FROM IF-MIB + PortList + FROM Q-BRIDGE-MIB + LacpKey,LacpState,ChurnState + FROM IEEE8023-LAG-MIB + + softentIND1LnkAgg + FROM ALCATEL-IND1-BASE; + + alcatelIND1LAGMIB MODULE-IDENTITY + LAST-UPDATED "201005130000Z" + ORGANIZATION "Alcatel-Lucent" + CONTACT-INFO + "Please consult with Customer Service to ensure the most appropriate + version of this document is used with the products in question: + + Alcatel-Lucent, Enterprise Solutions Division + (Formerly Alcatel Internetworking, Incorporated) + 26801 West Agoura Road + Agoura Hills, CA 91301-5122 + United States Of America + + Telephone: North America +1 800 995 2696 + Latin America +1 877 919 9526 + Europe +31 23 556 0100 + Asia +65 394 7933 + All Other +1 818 878 4507 + + Electronic Mail: support@ind.alcatel.com + World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise + File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs" + + DESCRIPTION + "This module describes an authoritative enterprise-specific Simple + Network Management Protocol (SNMP) Management Information Base (MIB): + + The Link Aggregation module for managing ALCATEL FALCON product + This MIB is an image of the 802.3ad standard. + The aim of this proprietary MIB is to allow the creation of + aggregate objects with their size. + + The right to make changes in specification and other information + contained in this document without prior notice is reserved. + + No liability shall be assumed for any incidental, indirect, special, or + consequential damages whatsoever arising from or related to this + document or the information contained herein. + + Vendors, end-users, and other interested parties are granted + non-exclusive license to use this specification in connection with + management of the products for which it is intended to be used. + + Copyright (C) 1995-2007 Alcatel-Lucent + ALL RIGHTS RESERVED WORLDWIDE" + + REVISION "201005130000Z" + DESCRIPTION + "Fixed the Notifications to use MIB Module OID.0 as Notifications root." + + ::= { softentIND1LnkAgg 1 } + + + alcatelIND1LAGMIBNotifications OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For LAG MIB Subsystem Notifications." + ::= { alcatelIND1LAGMIB 0 } + + alcatelIND1LAGMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1LAGMIB 1 } + + + -- ------------------------------------------------------------- + -- Textual Conventions + -- ------------------------------------------------------------- + + + + + +-- - Local Declares + + LacpType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The object supports or not (Omnichannel) the LACP protocol ." + SYNTAX INTEGER { + lacpOff(0), + lacpOn(1) + } + + McLagType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The object supports or not the Multi Chassis Link aggregation ." + SYNTAX INTEGER { + mcLagOff(0), + mcLagOn(1) + } + + + -- ------------------------------------------------------------- + + + -- ------------------------------------------------------------- + -- groups in the LAG MIB + -- ------------------------------------------------------------- + + + alclnkaggAgg OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 1 } + alclnkaggAggPort OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 2 } + + + -- ------------------------------------------------------------- + + -- ------------------------------------------------------------- + -- The Tables Last Changed Object + -- ------------------------------------------------------------- + + + + alclnkaggTablesLastChanged OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the time of the + most recent change to the alclnkaggAggTable, + alclnkaggAggPortListTable, or + alclnkaggAggPortTable." + ::= { alcatelIND1LAGMIBObjects 3 } + + + + + + -- ------------------------------------------------------------- + -- The Aggregator Configuration Table + -- ------------------------------------------------------------- + + + alclnkaggAggTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information about every + Aggregator that is associated with this System. + To create specify alclnkaggAggIndex,alclnkaggAggSize + and alclnkaggAggLacpType. " + + REFERENCE + "IEEE 802.3 Subclause 30.7.1" + ::= { alclnkaggAgg 1 } + + + alclnkaggAggEntry OBJECT-TYPE + SYNTAX AlclnkaggAggEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of the Aggregator parameters. This is indexed + by the ifIndex of the Aggregator." + INDEX { alclnkaggAggIndex } + ::= { alclnkaggAggTable 1 } + + + AlclnkaggAggEntry ::= + SEQUENCE { + alclnkaggAggIndex + InterfaceIndex, + alclnkaggAggMACAddress + MacAddress, + alclnkaggAggActorSystemPriority + Integer32, + alclnkaggAggActorSystemID + MacAddress, + alclnkaggAggPartnerAdminKey + LacpKey, + alclnkaggAggActorAdminKey + LacpKey, + alclnkaggAggActorOperKey + LacpKey, + alclnkaggAggPartnerSystemID + MacAddress, + alclnkaggAggPartnerSystemPriority + Integer32, + alclnkaggAggPartnerOperKey + LacpKey, +-------------------------------- +-- Specific Proprietary Part +------------------------------ + alclnkaggAggSize + Integer32, + alclnkaggAggNumber + Integer32, + alclnkaggAggDescr + SnmpAdminString, + alclnkaggAggName + SnmpAdminString, + alclnkaggAggLacpType + LacpType, + alclnkaggAggAdminState +-- Adminstate, + INTEGER, + alclnkaggAggOperState + INTEGER, + alclnkaggAggNbrSelectedPorts + Integer32, + alclnkaggAggNbrAttachedPorts + Integer32, + alclnkaggAggPrimaryPortIndex + InterfaceIndex, + alclnkaggAggPrimaryPortPosition + Integer32, + alclnkaggAggRowStatus + RowStatus, + alclnkaggAggMcLagType + McLagType , + alclnkaggAggPortSelectionHash + INTEGER, + alclnkaggAggWTRTimer + Integer32 + } + + + alclnkaggAggIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The unique identifier allocated to this Aggregator by the local + System. + This attribute identifies an Aggregator instance among the subordinate + managed objects of the containing object. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.1" + ::= { alclnkaggAggEntry 1 } + + + alclnkaggAggMACAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A 6-octet read-only value carrying the individual + MAC address assigned to the Aggregator." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.9" + ::= { alclnkaggAggEntry 2 } + + + alclnkaggAggActorSystemPriority OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A 2-octet read-write value indicating the priority value + associated with the Actor's System ID." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.5" + ::= { alclnkaggAggEntry 3 } + + + alclnkaggAggActorSystemID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A 6-octet read-write MAC address value used as a unique + identifier for the System that contains this Aggregator. + NOTE-From the perspective of the Link Aggregation mechanisms + described in Clause , only a single combination of + Actor's System ID and System Priority are considered, and no + distinction is made between the values of these parameters + for an Aggregator and the port(s) that are associated with + it; i.e., the protocol is described in terms of the operation + of aggregation within a single System. However, the managed. + objects provided for the Aggregator and the port both allow + management of these parameters. The result of this is to + permit a single piece of equipment to be configured by + management to contain more than one System from the point of + view of the operation of Link Aggregation. This may be of + particular use in the configuration of equipment that has + limited aggregation capability (see )." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.4" + ::= { alclnkaggAggEntry 4 } + + alclnkaggAggPartnerAdminKey OBJECT-TYPE + SYNTAX LacpKey + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The current Administrative value of the Key accepted for the + Aggregator's current protocol Partner. Optional this is + a 16-bit read-write value. If the aggregation is manually + configured, this Key value will be a value assigned by the + local System. The administrative Key value may differ from + the operational " + REFERENCE + " specific to ALCATEL " + ::= { alclnkaggAggEntry 5 } + + + alclnkaggAggActorAdminKey OBJECT-TYPE + SYNTAX LacpKey + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The current administrative value of the Key for the Aggregator. + The administrative Key value may differ from the operational + Key value for the reasons discussed in . This is a 16-bit, + read-write value. The meaning of particular Key values + is of local significance." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.7" + ::= { alclnkaggAggEntry 6 } + + + alclnkaggAggActorOperKey OBJECT-TYPE + SYNTAX LacpKey + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational value of the Key for the Aggregator. + The administrative Key value may differ from the operational + Key value for the reasons discussed in . + This is a 16-bit read-only value. The meaning of particular Key + values is of local significance." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.8" + ::= { alclnkaggAggEntry 7 } + + + alclnkaggAggPartnerSystemID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A 6-octet read-write MAC address value consisting + of the unique identifier for the current protocol Partner of + this Aggregator. A value of zero indicates that there is no + known Partner. If the aggregation is manually configured, this + System ID value will be a value assigned by the local System." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.10" + ::= { alclnkaggAggEntry 8 } + + + alclnkaggAggPartnerSystemPriority OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A 2-octet read-only value that indicates the priority + value associated with the Partner's System ID. If the + aggregation is manually configured, this System Priority value + will be a value assigned by the local System." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.11" + ::= { alclnkaggAggEntry 9 } + + + alclnkaggAggPartnerOperKey OBJECT-TYPE + SYNTAX LacpKey + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The current operational value of the Key for the + Aggregator's current protocol Partner. This is + a 16-bit read- write value. If the aggregation is manually + configured, this Key value will be a value assigned by the + local System." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.12" + ::= { alclnkaggAggEntry 10 } + + +------------------------------------------------------------ +-- Specific Proprietary Part +----------------------------------------------------------- + + + alclnkaggAggSize OBJECT-TYPE + SYNTAX Integer32 (1..16) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Maximum number of links that could be attached to this + aggregator, This nominator is mandatory and is a required + field in order to create a row in this table" + REFERENCE + "specific to ALCATEL" + ::= { alclnkaggAggEntry 11 } + + alclnkaggAggNumber OBJECT-TYPE + SYNTAX Integer32(0..127) +-- MAX-ACCESS read-create + MAX-ACCESS read-only + STATUS current + DESCRIPTION +-- "Aggreagtor number to assign a reference number at the creation of +-- an aggregator mandatory for the Omnichhannel object creation" + "Aggreagtor number reference the aggregate dedicated from the + ifindex at the creation" + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggEntry 12 } + + -- alclnkaggAggDescr is equivalent to ifDescr in ifTable + + alclnkaggAggDescr OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description is a human readable string which describes of + the type of aggregator object OMNICHANNEL / LACP etc " + REFERENCE + " IEEE 802.3 Subclause 30.7.1.1.2" + ::= { alclnkaggAggEntry 13 } + + -- alclnkaggAggDescr is equivalent to ifDescr in ifXTable + + alclnkaggAggName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..255)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Name of the aggregator is human readable string manually given by + the operator" + REFERENCE + " IEEE 802.3 Subclause 30.7.1.1.3" + ::= { alclnkaggAggEntry 14 } + + + alclnkaggAggLacpType OBJECT-TYPE + SYNTAX LacpType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Aggreagtor set with LACP protocol or not (case of Omnichannel) + mandatory at the creation of the aggregator, cannot be modified + later " + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggEntry 15 } + + + -- alclnkaggAggAdminState is equivalent to ifAdminStatus in ifTable + + alclnkaggAggAdminState OBJECT-TYPE +-- SYNTAX AdminState + SYNTAX INTEGER { + enable(1), -- ready to pass packets + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "status assigned by the admnistrator. The activation of the aggregator + is managed by this nominator" + REFERENCE + " IEEE 802.3 Subclause 30.7.1.1.13" + ::= { alclnkaggAggEntry 16 } + + -- alclnkaggAggOperState is similar to ifOperStatus in ifTable but the nominator + -- does not take exactly the same values. + + alclnkaggAggOperState OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + logicPortCreatFailed(3), + qReservationFailed(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Operational status of the aggregator with proprietary values + operational state from iftable corresponds to UP state " + REFERENCE + " IEEE 802.3 Subclause 30.7.1.1.14" + ::= { alclnkaggAggEntry 17 } + + alclnkaggAggNbrSelectedPorts OBJECT-TYPE + SYNTAX Integer32 (0..16) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ports selected at the momemt ." + REFERENCE + "Specific to ALCATEL" + ::= { alclnkaggAggEntry 18 } + + alclnkaggAggNbrAttachedPorts OBJECT-TYPE + SYNTAX Integer32 (0..16) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ports attached at the momemt ." + REFERENCE + "Specific to ALCATEL" + ::= { alclnkaggAggEntry 19 } + + alclnkaggAggPrimaryPortIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "the ifindex of the primary port in the aggregator used to send + BPDUs and flooding frames Zeo indicates no primary port is + available ." + REFERENCE + "Specific to ALCATEL" + ::= { alclnkaggAggEntry 20 } + + alclnkaggAggPrimaryPortPosition OBJECT-TYPE + SYNTAX Integer32 (-1..15) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "the port index number in the aggregator used to send + BPDUs and flooding frames ." + REFERENCE + "Specific to ALCATEL" + ::= { alclnkaggAggEntry 21 } + + alclnkaggAggRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is the RowStatus (locking flag) for creating or + deleting aggregator objects. alclnkaggAggSize, alclnkaggAggLacpType + and must be supplied in the request to create a row, it is a + required field." + REFERENCE + " specific to ALCATEL " + ::= { alclnkaggAggEntry 22 } + + alclnkaggAggMcLagType OBJECT-TYPE + SYNTAX McLagType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Aggregator set with MultiChassis mode or not + mandatory at the creation of the aggregator, cannot be modified + later " + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggEntry 23 } + + alclnkaggAggPortSelectionHash OBJECT-TYPE + SYNTAX INTEGER { + sourceMac (1), + destinationMac(2), + sourceDestinationMac (3), + sourceIp (4), + destinationIp(5), + sourceDestinationIp (6), + tunnelProtocol (7) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Port Selection Criteria used to hash one port of the aggregate + for a given traffic flow " + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggEntry 24 } + + alclnkaggAggWTRTimer OBJECT-TYPE + SYNTAX Integer32(0..12) + UNITS "minutes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This sets the WTR timer value in minutes for an aggregate. The default value is 0 minute. + The Default means the WTR is Disabled. + When an link comes up, + If there is no WTR enabled for this linkagg, bring up the link. + If there is a WTR configured for this linkagg, + 1.if there are no other links attached to the same linkagg, bypass the WTR and bring up the link immediately. + 2. If there are links attached to the same linkagg, start the WTR when the WTR expires,bring up the link." + REFERENCE + "specific to ALCATEL" + DEFVAL { 0 } + ::={ alclnkaggAggEntry 25} + + + + -- ------------------------------------------------------------- + -- The Aggregation Port List Table + -- ------------------------------------------------------------- + + + alclnkaggAggPortListTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggPortListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains a list of all the ports + associated with each Aggregator." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.31" + ::= { alclnkaggAgg 2 } + + + alclnkaggAggPortListEntry OBJECT-TYPE + SYNTAX AlclnkaggAggPortListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of the ports associated with a given Aggregator. + This is indexed by the ifIndex of the Aggregator." + INDEX { alclnkaggAggIndex } + ::= { alclnkaggAggPortListTable 1 } + + + AlclnkaggAggPortListEntry ::= + SEQUENCE { + alclnkaggAggPortListPorts + PortList + } + + + alclnkaggAggPortListPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The complete set of ports currently associated with + this Aggregator. Each bit set in this list represents + an Actor Port member of this Link Aggregation." + REFERENCE + "IEEE 802.3 Subclause 30.7.1.1.31" + ::= { alclnkaggAggPortListEntry 1 } + + + -- ------------------------------------------------------------- + -- The Aggregation Port Table + -- ------------------------------------------------------------- + + + alclnkaggAggPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains Link Aggregation Control + configuration information about every + Aggregation Port associated with this device. + A row appears in this table for each physical port." + REFERENCE + "IEEE 802.3 Subclause 30.7.2" + ::= { alclnkaggAggPort 1 } + + alclnkaggAggPortEntry OBJECT-TYPE + SYNTAX AlclnkaggAggPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Link Aggregation Control configuration + parameters for each Aggregation Port on this device." + INDEX { alclnkaggAggPortIndex } + ::= { alclnkaggAggPortTable 1 } + + + AlclnkaggAggPortEntry ::= + SEQUENCE { + alclnkaggAggPortIndex + InterfaceIndex, + alclnkaggAggPortActorSystemPriority + Integer32, + alclnkaggAggPortActorSystemID + MacAddress, + alclnkaggAggPortActorAdminKey + LacpKey, + alclnkaggAggPortActorOperKey + LacpKey, + alclnkaggAggPortPartnerAdminSystemPriority + Integer32, + alclnkaggAggPortPartnerOperSystemPriority + Integer32, + alclnkaggAggPortPartnerAdminSystemID + MacAddress, + alclnkaggAggPortPartnerOperSystemID + MacAddress, + alclnkaggAggPortPartnerAdminKey + LacpKey, + alclnkaggAggPortPartnerOperKey + LacpKey, + alclnkaggAggPortSelectedAggID + InterfaceIndex, + alclnkaggAggPortAttachedAggID + InterfaceIndex, + alclnkaggAggPortActorPort + Integer32, + alclnkaggAggPortActorPortPriority + Integer32, + alclnkaggAggPortPartnerAdminPort + Integer32, + alclnkaggAggPortPartnerOperPort + Integer32, + alclnkaggAggPortPartnerAdminPortPriority + Integer32, + alclnkaggAggPortPartnerOperPortPriority + Integer32, + alclnkaggAggPortActorAdminState + LacpState, + alclnkaggAggPortActorOperState + LacpState, + alclnkaggAggPortPartnerAdminState + LacpState, + alclnkaggAggPortPartnerOperState + LacpState, + +------------------------------------------------------------ +-- Specific Proprietary Part +----------------------------------------------------------- + + alclnkaggAggPortSelectedAggNumber + Integer32, + alclnkaggAggPortGlobalPortNumber + Integer32, + alclnkaggAggPortAdminState +-- AdminState, + INTEGER, + alclnkaggAggPortOperState +-- OperState, + INTEGER, + alclnkaggAggPortState + INTEGER, + alclnkaggAggPortLinkState + INTEGER, + alclnkaggAggPortPrimary + INTEGER, + alclnkaggAggPortLacpType + LacpType, + alclnkaggAggPortRowStatus + RowStatus, + alclnkaggAggPortMcLagType + McLagType + } + + + alclnkaggAggPortIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifIndex of the port" + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.1" + ::= { alclnkaggAggPortEntry 1 } + + + alclnkaggAggPortActorSystemPriority OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A 2-octet read-write value used to define the priority + value associated with the Actor's System ID." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.2" + ::= { alclnkaggAggPortEntry 2 } + + alclnkaggAggPortActorSystemID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A 6-octet read-only MAC address value that defines + the value of the System ID for the System that contains this + Aggregation Port." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.3" + ::= { alclnkaggAggPortEntry 3 } + + alclnkaggAggPortActorAdminKey OBJECT-TYPE + SYNTAX LacpKey + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The current administrative value of the Key for the + Aggregation Port. This is a 16-bit read-write value. + The meaning of particular Key values is of local significance." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.4" + ::= { alclnkaggAggPortEntry 4 } + + + alclnkaggAggPortActorOperKey OBJECT-TYPE + SYNTAX LacpKey + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational value of the Key for the + Aggregation Port. This is a 16-bit read-only value. + The meaning of particular Key values is of local significance." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.5" + ::= { alclnkaggAggPortEntry 5 } + + + alclnkaggAggPortPartnerAdminSystemPriority OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A 2-octet read-write value used to define the administrative + value of priority associated with the Partner's System ID. The + assigned value is used, along with the value of + aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, + aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, + in order to achieve manually configured aggregation." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.6" + ::= { alclnkaggAggPortEntry 6 } + + alclnkaggAggPortPartnerOperSystemPriority OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A 2-octet read-only value indicating the operational value + of priority associated with the Partner's System ID. The + value of this attribute may contain the manually configured value + carried in aAggPortPartnerAdminSystemPriority + if there is no protocol Partner." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.7" + ::= { alclnkaggAggPortEntry 7 } + + alclnkaggAggPortPartnerAdminSystemID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A 6-octet read-write MACAddress value representing + the administrative value of the Aggregation Port's protocol + Partner's System ID. The assigned value is used, along with + the value of aAggPortPartnerAdminSystemPriority, + aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, + and aAggPortPartnerAdminPortPriority, in order to + achieve manually configured aggregation." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.8" + ::= { alclnkaggAggPortEntry 8 } + + alclnkaggAggPortPartnerOperSystemID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A 6-octet read-only MACAddress value representing + the current value of the Aggregation Port's protocol Partner's + System ID. A value of zero indicates that there is no known + protocol Partner. The value of this attribute may contain the + manually configured value carried in + aAggPortPartnerAdminSystemID if there is no protocol Partner." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.9" + ::= { alclnkaggAggPortEntry 9 } + + + alclnkaggAggPortPartnerAdminKey OBJECT-TYPE + SYNTAX LacpKey + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The current administrative value of the Key for the + protocol Partner. This is a 16-bit read-write value. + The assigned value is used, along with the value of + aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, + aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, + in order to achieve manually configured aggregation." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.10" + ::= { alclnkaggAggPortEntry 10 } + + + alclnkaggAggPortPartnerOperKey OBJECT-TYPE + SYNTAX LacpKey + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational value of the Key for the + protocol Partner. The value of this attribute may contain + the manually configured value carried in + aAggPortPartnerAdminKey if there is no protocol Partner. + This is a 16-bit read-only value." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.11" + ::= { alclnkaggAggPortEntry 11 } + + + alclnkaggAggPortSelectedAggID OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The identifier value of the Aggregator that this Aggregation + Port has currently selected. Zero indicates that the Aggregation + Port has not selected an Aggregator, either because it is in the + process of detaching from an Aggregator or because there is no + suitable Aggregator available for it to select. This value is + read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.12" + ::= { alclnkaggAggPortEntry 12 } + + + alclnkaggAggPortAttachedAggID OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The identifier value of the Aggregator that this Aggregation + Port is currently attached to. Zero indicates that the Aggregation + Port is not currently attached to an Aggregator. This value is + read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.13" + ::= { alclnkaggAggPortEntry 13 } + + + alclnkaggAggPortActorPort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port number locally assigned to the Aggregation Port. + The port number is communicated in LACPDUs as the + Actor_Port. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.14" + ::= { alclnkaggAggPortEntry 14 } + + + alclnkaggAggPortActorPortPriority OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The priority value assigned to this Aggregation Port. + This 16-bit value is read-write." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.15" + ::= { alclnkaggAggPortEntry 15 } + + + alclnkaggAggPortPartnerAdminPort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The current administrative value of the port number + for the protocol Partner. This is a 16-bit read-write value. + The assigned value is used, along with the value of + aAggPortPartnerAdminSystemPriority, + aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, + and aAggPortPartnerAdminPortPriority, + in order to achieve manually configured aggregation." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.16" + ::= { alclnkaggAggPortEntry 16 } + + + alclnkaggAggPortPartnerOperPort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational port number assigned to this Aggregation + Port by the Aggregation Port's protocol Partner. The value + of this attribute may contain the manually configured value + carried in aAggPortPartnerAdminPort if there is no protocol + Partner. This 16-bit value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.17" + ::= { alclnkaggAggPortEntry 17 } + + + alclnkaggAggPortPartnerAdminPortPriority OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The current administrative value of the port priority + for the protocol Partner. This is a 16-bit read-write value. + The assigned value is used, along with the value of + aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, + aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, + in order to achieve manually configured aggregation." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.18" + ::= { alclnkaggAggPortEntry 18 } + + + alclnkaggAggPortPartnerOperPortPriority OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The priority value assigned to this Aggregation Port + by the Partner. The value of this attribute may contain the + manually configured value carried in + aAggPortPartnerAdminPortPriority if there is no + protocol Partner. This 16-bit value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.19" + ::= { alclnkaggAggPortEntry 19 } + + + alclnkaggAggPortActorAdminState OBJECT-TYPE + SYNTAX LacpState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A string of 8 bits, corresponding to the administrative values + of Actor_State () as transmitted by the Actor in LACPDUs. + The first bit corresponds to bit 0 of Actor_State (LACP_Activity), + the second bit corresponds to bit 1 (LACP_Timeout), the third bit + corresponds to bit 2 (Aggregation), the fourth bit corresponds to + bit 3 (Synchronization), the fifth bit corresponds to bit 4 + (Collecting), the sixth bit corresponds to bit 5 (Distributing), + the seventh bit corresponds to bit 6 (Defaulted), and the eighth + bit corresponds to bit 7 (Expired). These values allow + administrative control over the values of LACP_Activity, + LACP_Timeout and Aggregation. This attribute value is read-write." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.20" + ::= { alclnkaggAggPortEntry 20 } + + + alclnkaggAggPortActorOperState OBJECT-TYPE + SYNTAX LacpState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A string of 8 bits, corresponding to the current + operational values of Actor_State as transmitted by the + Actor in LACPDUs. The bit allocations are as defined in + . This attribute value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.21" + ::= { alclnkaggAggPortEntry 21 } + + + alclnkaggAggPortPartnerAdminState OBJECT-TYPE + SYNTAX LacpState + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A string of 8 bits, corresponding to the current administrative + value of Actor_State for the protocol Partner. The bit + allocations are as defined in . This attribute value is + read-write. The assigned value is used in order to achieve + manually configured aggregation." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.22" + ::= { alclnkaggAggPortEntry 22 } + + + alclnkaggAggPortPartnerOperState OBJECT-TYPE + SYNTAX LacpState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A string of 8 bits, corresponding to the current values of + Actor_State in the most recently received LACPDU transmitted + by the protocol Partner. The bit allocations are as defined in + . In the absence of an active protocol Partner, this + value may reflect the manually configured value + aAggPortPartnerAdminState. This attribute value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.2.1.23" + ::= { alclnkaggAggPortEntry 23 } + + +------------------------------------------------------------ +-- Specific Proprietary Part +----------------------------------------------------------- + + + alclnkaggAggPortSelectedAggNumber OBJECT-TYPE + SYNTAX Integer32(-1..127) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Aggreagtor number to attach a port at its creation + mandatory and only used for the + Omnichhannel not allowed for LACP + (-1) value displayed when it is not significant" + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggPortEntry 24 } + + alclnkaggAggPortGlobalPortNumber OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Physical reference of the port " + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggPortEntry 25 } + + + -- alclnkaggAggPortAdminState is equivalent to ifAdminStatus in ifTable + + alclnkaggAggPortAdminState OBJECT-TYPE + SYNTAX INTEGER { + enable(1), -- ready to pass packets + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "status assigned by the admnistrator. port activation done by iftable + this nominator is equivalent to ifAdminStatus in ifTable " + REFERENCE + " IEEE 802.3 Subclause 30.7.1.1.13" + ::= { alclnkaggAggPortEntry 26 } + + + alclnkaggAggPortOperState OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + notAttached(3), + notAggregable(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Operational status of the port regarding the traffic" + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggPortEntry 27 } + + alclnkaggAggPortState OBJECT-TYPE + SYNTAX INTEGER { + created(1), + configurable(2), + configured(3), + selected(4), + reserved(5), + attached(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "aggregation status of the port" + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggPortEntry 28 } + + alclnkaggAggPortLinkState OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Operational status of the link" + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggPortEntry 29 } + + -- alclnkaggAggPortLinkState is equivalent to ifOperStatus + + alclnkaggAggPortPrimary OBJECT-TYPE + SYNTAX INTEGER { + yes(1), + no(2), + notSignificant(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "port primary or not" + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggPortEntry 30 } + + + alclnkaggAggPortLacpType OBJECT-TYPE + SYNTAX LacpType + MAX-ACCESS read-create +-- STATUS mandatory + STATUS current + DESCRIPTION + "Port set with LACP protocol or not (case of Omnichannel) + mandatory at the creation of the port" + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggPortEntry 31 } + + + alclnkaggAggPortRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is the RowStatus (locking flag) for creating or + deleting aggregatable port objects. alclnkaggAggPortActorAdminKey + and alclnkaggAggPortSlotSlice must be supplied + in the request to create a row, it is a required field." + REFERENCE + " specific to ALCATEL " + ::= { alclnkaggAggPortEntry 32 } + + alclnkaggAggPortMcLagType OBJECT-TYPE + SYNTAX McLagType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port set with McLag mode or not " + REFERENCE + " specific to ALCATEL" + ::= { alclnkaggAggPortEntry 33 } + + -- ------------------------------------------------------------- + -- LACP Statistics Table + -- ------------------------------------------------------------- + + + alclnkaggAggPortStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggPortStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains Link Aggregation information + about every port that is associated with this device. + A row appears in this table for each physical port." + REFERENCE + "IEEE 802.3 Subclause 30.7.3" + ::= { alclnkaggAggPort 2 } + + + alclnkaggAggPortStatsEntry OBJECT-TYPE + SYNTAX AlclnkaggAggPortStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Link Aggregation Control Protocol statistics + for each port on this device." + INDEX { alclnkaggAggPortIndex } + ::= { alclnkaggAggPortStatsTable 1 } + + + AlclnkaggAggPortStatsEntry ::= + SEQUENCE { + alclnkaggAggPortStatsLACPDUsRx + Counter32, + alclnkaggAggPortStatsMarkerPDUsRx + Counter32, + alclnkaggAggPortStatsMarkerResponsePDUsRx + Counter32, + alclnkaggAggPortStatsUnknownRx + Counter32, + alclnkaggAggPortStatsIllegalRx + Counter32, + alclnkaggAggPortStatsLACPDUsTx + Counter32, + alclnkaggAggPortStatsMarkerPDUsTx + Counter32, + alclnkaggAggPortStatsMarkerResponsePDUsTx + Counter32 + } + + + alclnkaggAggPortStatsLACPDUsRx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid LACPDUs received on this + Aggregation Port. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.3.1.2" + ::= { alclnkaggAggPortStatsEntry 1 } + + + alclnkaggAggPortStatsMarkerPDUsRx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid Marker PDUs received on this + Aggregation Port. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.3.1.3" + ::= { alclnkaggAggPortStatsEntry 2 } + + + alclnkaggAggPortStatsMarkerResponsePDUsRx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid Marker Response PDUs received on this + Aggregation Port. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.3.1.4" + ::= { alclnkaggAggPortStatsEntry 3 } + + + alclnkaggAggPortStatsUnknownRx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames received that either: + - carry the Slow Protocols Ethernet Type value (), + but contain an unknown PDU, or: + - are addressed to the Slow Protocols group MAC + Address (), but do not carry the Slow Protocols Ethernet Type. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.3.1.5" + ::= { alclnkaggAggPortStatsEntry 4 } + + + alclnkaggAggPortStatsIllegalRx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames received that carry the Slow + Protocols Ethernet Type value (), but contain a badly formed + PDU or an illegal value of Protocol Subtype (). + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.3.1.6" + ::= { alclnkaggAggPortStatsEntry 5 } + + + alclnkaggAggPortStatsLACPDUsTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of LACPDUs transmitted on this + Aggregation Port. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.3.1.7" + ::= { alclnkaggAggPortStatsEntry 6 } + + + alclnkaggAggPortStatsMarkerPDUsTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Marker PDUs transmitted on this + Aggregation Port. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.3.1.8" + ::= { alclnkaggAggPortStatsEntry 7 } + + + alclnkaggAggPortStatsMarkerResponsePDUsTx OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Marker Response PDUs transmitted + on this Aggregation Port. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.3.1.9" + ::= { alclnkaggAggPortStatsEntry 8 } + + + -- ------------------------------------------------------------- + -- LACP Debug Table + -- ------------------------------------------------------------- + + + + alclnkaggAggPortDebugTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggPortDebugEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains Link Aggregation debug + information about every port that is associated with + this device. A row appears in this table for each + physical port." + REFERENCE + "IEEE 802.3 Subclause 30.7.4" + ::= { alclnkaggAggPort 3 } + + + alclnkaggAggPortDebugEntry OBJECT-TYPE + SYNTAX AlclnkaggAggPortDebugEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of the debug parameters for a port." + INDEX { alclnkaggAggPortIndex } + ::= { alclnkaggAggPortDebugTable 1 } + + AlclnkaggAggPortDebugEntry ::= + SEQUENCE { + alclnkaggAggPortDebugRxState + INTEGER, + alclnkaggAggPortDebugLastRxTime + TimeTicks, + alclnkaggAggPortDebugMuxState + INTEGER, + alclnkaggAggPortDebugMuxReason + SnmpAdminString, + alclnkaggAggPortDebugActorChurnState + ChurnState, + alclnkaggAggPortDebugPartnerChurnState + ChurnState, + alclnkaggAggPortDebugActorChurnCount + Counter32, + alclnkaggAggPortDebugPartnerChurnCount + Counter32, + alclnkaggAggPortDebugActorSyncTransitionCount + Counter32, + alclnkaggAggPortDebugPartnerSyncTransitionCount + Counter32, + alclnkaggAggPortDebugActorChangeCount + Counter32, + alclnkaggAggPortDebugPartnerChangeCount + Counter32 + } + + + alclnkaggAggPortDebugRxState OBJECT-TYPE + SYNTAX INTEGER { + current(1), + expired(2), + defaulted(3), + initialize(4), + lacpDisabled(5), + portDisabled(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute holds the value 'current' if the Receive + state machine for the Aggregation Port is in the + CURRENT state, 'expired' if the Receive state machine. + is in the EXPIRED state, 'defaulted' if the Receive state + machine is in the DEFAULTED state, 'initialize' if the + Receive state machine is in the INITIALIZE state, + 'lacpDisabled' if the Receive state machine is in the + LACP_DISABLED state, or 'portDisabled' if the Receive + state machine is in the PORT_DISABLED state. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.2" + ::= { alclnkaggAggPortDebugEntry 1 } + + + alclnkaggAggPortDebugLastRxTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of aTimeSinceSystemReset (F.2.1) when + the last LACPDU was received by this Aggregation Port. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.3" + ::= { alclnkaggAggPortDebugEntry 2 } + + alclnkaggAggPortDebugMuxState OBJECT-TYPE + SYNTAX INTEGER { + detached(1), + waiting(2), + attached(3), + collecting(4), + distributing(5), + collectingDistributing(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute holds the value `detached' if the Mux + state machine (43.4.14) for the Aggregation Port is in + the DETACHED state, `waiting' if the Mux state machine + is in the WAITING state, `attached' if the Mux state + machine for the Aggregation Port is in the ATTACHED + state, `collecting' if the Mux state machine for the + Aggregation Port is in the COLLECTING state, + `distributing' if the Mux state machine for the + Aggregation Port is in the DISTRIBUTING state, and + `collectingDistributing' if the Mux state machine for + the Aggregation Port is in the COLLECTING_DISTRIBUTING + state. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.4" + ::= { alclnkaggAggPortDebugEntry 3 } + + + alclnkaggAggPortDebugMuxReason OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A human-readable text string indicating the reason + for the most recent change of Mux machine state. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.5" + ::= { alclnkaggAggPortDebugEntry 4 } + + + alclnkaggAggPortDebugActorChurnState OBJECT-TYPE + SYNTAX ChurnState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the Actor Churn Detection machine + () for the Aggregation Port. A value of 'noChurn' + indicates that the state machine is in either the + NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR + state, and 'churn' indicates that the state machine is in the + ACTOR_CHURN state. This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.6" + ::= { alclnkaggAggPortDebugEntry 5 } + + + alclnkaggAggPortDebugPartnerChurnState OBJECT-TYPE + SYNTAX ChurnState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the Partner Churn Detection machine + () for the Aggregation Port. A value of 'noChurn' + indicates that the state machine is in either the + NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR + state, and 'churn' indicates that the state machine is + in the PARTNER_CHURN state. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.7" + ::= { alclnkaggAggPortDebugEntry 6 } + + + + alclnkaggAggPortDebugActorChurnCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of the number of times the Actor Churn state + machine has entered the ACTOR_CHURN state. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.8" + ::= { alclnkaggAggPortDebugEntry 7 } + + + alclnkaggAggPortDebugPartnerChurnCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of the number of times the Partner Churn + state machine has entered the PARTNER_CHURN state. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.9" + ::= { alclnkaggAggPortDebugEntry 8 } + + + alclnkaggAggPortDebugActorSyncTransitionCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of the number of times the Actor's Mux state + machine () has entered the IN_SYNC state. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.10" + ::= { alclnkaggAggPortDebugEntry 9 } + + + alclnkaggAggPortDebugPartnerSyncTransitionCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of the number of times the Partner's Mux + state machine () has entered the IN_SYNC state. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.11" + ::= { alclnkaggAggPortDebugEntry 10 } + + + alclnkaggAggPortDebugActorChangeCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of the number of times the Actor's perception of + the LAG ID for this Aggregation Port has changed. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.12" + ::= { alclnkaggAggPortDebugEntry 11 } + + + alclnkaggAggPortDebugPartnerChangeCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of the number of times the Partner's perception of + the LAG ID (see ) for this Aggregation Port has changed. + This value is read-only." + REFERENCE + "IEEE 802.3 Subclause 30.7.4.1.13" + ::= { alclnkaggAggPortDebugEntry 12 } + + + + -- ------------------------------------------------------------- + -- Link Aggregation additional parameters + -- ------------------------------------------------------------- + + + + ---------------------------------------------------------------- + -- Table for mapping LAG Id to the ifIndex of this aggregate + --------------------------------------------------------------- + + alclnkaggAggIdIfIndexTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggIdIfIndexEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row in this table represents the link aggregation + aggregate id's corresponding ifIndex. " + REFERENCE + "specific to Alcatel" + ::= { alclnkaggAgg 3 } + + + alclnkaggAggIdIfIndexEntry OBJECT-TYPE + SYNTAX AlclnkaggAggIdIfIndexEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Parameters for link aggregation aggregate id relationship to ifIndex." + INDEX { alclnkaggIfIndex } + ::= { alclnkaggAggIdIfIndexTable 1 } + + + AlclnkaggAggIdIfIndexEntry ::= + SEQUENCE { + + alclnkaggIfIndex + Integer32, + alclnkaggAggId + Integer32 + } + + alclnkaggIfIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IfIndex for the given Aggregate ID" + ::= { alclnkaggAggIdIfIndexEntry 1 } + + alclnkaggAggId OBJECT-TYPE + SYNTAX Integer32 (0..127) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The aggregate id number." + REFERENCE + "specific to Alcatel" + ::= { alclnkaggAggIdIfIndexEntry 2 } + + + + ---------------------------------------------------------------- + -- Table for LAS data for this aggregate + --------------------------------------------------------------- + + alclnkaggAggIdAccountTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggIdAccountEntry + MAX-ACCESS not-accessible + STATUS current + + DESCRIPTION + "Rows in this table represents account statistics of one aggregation." + + REFERENCE + "specific to Alcatel" + ::= { alclnkaggAgg 4 } + alclnkaggAggIdAccountEntry OBJECT-TYPE + SYNTAX AlclnkaggAggIdAccountEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Link Aggregate statistics." + INDEX { alclnkaggAggIndex } + ::= { alclnkaggAggIdAccountTable 1 } + AlclnkaggAggIdAccountEntry ::= + SEQUENCE { + alcRxUndersize + Counter64, + alcTxUndersize + Counter64, + alcRxOversize + Counter64, + alcTxOversize + Counter64, + alcRxPackets64 + Counter64, + alcRxPackets127 + Counter64, + alcRxPackets255 + Counter64, + alcRxPackets511 + Counter64, + alcRxPackets1023 + Counter64, + alcRxPackets1518 + Counter64, + alcRxPackets4095 + Counter64, + alcRxPackets9216 + Counter64, + alcRxJabberFrames + Counter64 + } + + alcRxUndersize OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Undersize packet received" + ::= { alclnkaggAggIdAccountEntry 1 } + + alcTxUndersize OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Undersize packet sent" + ::= { alclnkaggAggIdAccountEntry 2 } + + alcRxOversize OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "oversize packet received" + ::= { alclnkaggAggIdAccountEntry 3 } + + alcTxOversize OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "oversize packet sent" + ::= { alclnkaggAggIdAccountEntry 4 } + + alcRxPackets64 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "packet size 64 received" + ::= { alclnkaggAggIdAccountEntry 5 } + + alcRxPackets127 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "packet size 64-127 received" + ::= { alclnkaggAggIdAccountEntry 6 } + + alcRxPackets255 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "packet size 128-255 received" + ::= { alclnkaggAggIdAccountEntry 7 } + + alcRxPackets511 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "packet size 256-511 received" + ::= { alclnkaggAggIdAccountEntry 8 } + + alcRxPackets1023 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "packet size 512-1023 received" + ::= { alclnkaggAggIdAccountEntry 9 } + + alcRxPackets1518 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "packet size 1024-1518 received" + ::= { alclnkaggAggIdAccountEntry 10 } + + alcRxPackets4095 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "packet size 1518-4095 received" + ::= { alclnkaggAggIdAccountEntry 11 } + + alcRxPackets9216 OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "packet size 4096-Max received" + ::= { alclnkaggAggIdAccountEntry 12 } + + alcRxJabberFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Jabber frames received" + ::= { alclnkaggAggIdAccountEntry 13 } + + + alclnkaggAggIdCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggIdCounterEntry + MAX-ACCESS not-accessible + STATUS current + + DESCRIPTION + "Rows in this table represents counter statistics of one aggregation." + + REFERENCE + "specific to Alcatel" + ::= { alclnkaggAgg 5 } + alclnkaggAggIdCounterEntry OBJECT-TYPE + SYNTAX AlclnkaggAggIdCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Link Aggregate statistics." + INDEX { alclnkaggAggIndex } + ::= { alclnkaggAggIdCounterTable 1 } + + AlclnkaggAggIdCounterEntry ::= + SEQUENCE { + alcInOctets + Counter64, + alcOutOctets + Counter64, + alcInUcastPkts + Counter64, + alcOutUcastPkts + Counter64, + alcInMcastPkts + Counter64, + alcOutMcastPkts + Counter64, + alcInBcastPkts + Counter64, + alcOutBcastPkts + Counter64, + alcInPauseFrames + Counter64, + alcOutPauseFrames + Counter64 + + } + + + alcInOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Octets received" + ::= { alclnkaggAggIdCounterEntry 1 } + + alcOutOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Octets sent" + ::= { alclnkaggAggIdCounterEntry 2 } + + alcInUcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "unicast packet received" + ::= { alclnkaggAggIdCounterEntry 3 } + + alcOutUcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "unicast packet sent" + ::= { alclnkaggAggIdCounterEntry 4 } + + alcInMcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "multicast packet received" + ::= { alclnkaggAggIdCounterEntry 5 } + + + alcOutMcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "multicast packet sent" + ::= { alclnkaggAggIdCounterEntry 6 } + + alcInBcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "broadcast packet received" + ::= { alclnkaggAggIdCounterEntry 7 } + + alcOutBcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "broadcast packet sent" + ::= { alclnkaggAggIdCounterEntry 8 } + + alcInPauseFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "pause frames received" + ::= { alclnkaggAggIdCounterEntry 9 } + + alcOutPauseFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "pause frames sent" + ::= { alclnkaggAggIdCounterEntry 10 } + + + alclnkaggAggIdCounterErrTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggIdCounterErrEntry + MAX-ACCESS not-accessible + STATUS current + + DESCRIPTION + "Rows in this table represents counter error statistics of one aggregation." + + REFERENCE + "specific to Alcatel" + ::= { alclnkaggAgg 6 } + alclnkaggAggIdCounterErrEntry OBJECT-TYPE + SYNTAX AlclnkaggAggIdCounterErrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Link Aggregate statistics." + INDEX { alclnkaggAggIndex } + ::= { alclnkaggAggIdCounterErrTable 1 } + + AlclnkaggAggIdCounterErrEntry ::= + SEQUENCE { + alcAlignmentsErrors + Counter64, + alcFCSErrors + Counter64, + alcIfInErrors + Counter64, + alcIfOutErrors + Counter64 + } + + alcAlignmentsErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Alignments error" + ::= { alclnkaggAggIdCounterErrEntry 1 } + + + alcFCSErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Alignments error" + ::= { alclnkaggAggIdCounterErrEntry 2 } + + + alcIfInErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "interface rceive error" + ::= { alclnkaggAggIdCounterErrEntry 3 } + + alcIfOutErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "interface send error" + ::= { alclnkaggAggIdCounterErrEntry 4 } + + + alclnkaggAggIdTrafficTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlclnkaggAggIdTrafficEntry + MAX-ACCESS not-accessible + STATUS current + + DESCRIPTION + "Rows in this table represents traffic count statistics of one aggregation." + + REFERENCE + "specific to Alcatel" + ::= { alclnkaggAgg 7 } + + alclnkaggAggIdTrafficEntry OBJECT-TYPE + SYNTAX AlclnkaggAggIdTrafficEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Link Aggregate statistics." + INDEX { alclnkaggAggIndex } + ::= { alclnkaggAggIdTrafficTable 1 } + + AlclnkaggAggIdTrafficEntry ::= + SEQUENCE { + alcInputPackets + Counter64, + alcInputBytes + Counter64, + alcOutputPackets + Counter64, + alcOutputBytes + Counter64 + } + + alcInputPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "InputPacket " + ::= { alclnkaggAggIdTrafficEntry 1 } + + alcInputBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Input bytes " + ::= { alclnkaggAggIdTrafficEntry 2 } + + alcOutputPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "InputPacket " + ::= { alclnkaggAggIdTrafficEntry 3 } + + alcOutputBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "output bytes " + ::= { alclnkaggAggIdTrafficEntry 4 } + + + -- ------------------------------------------------------------- + -- IEEE 802.3ad MIB - Conformance Information + -- ------------------------------------------------------------- + + + alcatelIND1LAGMIBConformance OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Link Aggregation Subsystem Conformance Information." + ::= { alcatelIND1LAGMIB 2 } + + alcatelIND1LAGMIBGroups OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Link Aggregation Subsystem Units Of Conformance." + ::= { alcatelIND1LAGMIBConformance 1 } + + + alcatelIND1LAGMIBCompliances OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Branch For Link Aggregation Subsystem Compliance Statements." + ::= { alcatelIND1LAGMIBConformance 2 } + + + -- ------------------------------------------------------------- + -- units of conformance + -- ------------------------------------------------------------- + + + alclnkaggAggGroup OBJECT-GROUP + OBJECTS { + alclnkaggAggActorSystemID, + alclnkaggAggPartnerAdminKey, + alclnkaggAggActorSystemPriority, + alclnkaggAggActorAdminKey, + alclnkaggAggMACAddress, + alclnkaggAggActorOperKey, + alclnkaggAggPartnerSystemID, + alclnkaggAggPartnerSystemPriority, + alclnkaggAggPartnerOperKey, +-------------------------------- +-- Specific Proprietary Part +------------------------------ + alclnkaggAggSize, + alclnkaggAggNumber, + alclnkaggAggDescr, + alclnkaggAggName, + alclnkaggAggLacpType, + alclnkaggAggAdminState, + alclnkaggAggOperState, + alclnkaggAggNbrSelectedPorts, + alclnkaggAggNbrAttachedPorts, + alclnkaggAggPrimaryPortIndex, + alclnkaggAggPrimaryPortPosition, + alclnkaggAggRowStatus, + alclnkaggAggMcLagType , + alclnkaggAggId, + alclnkaggAggPortSelectionHash, + alclnkaggAggWTRTimer + } + STATUS current + DESCRIPTION + "A collection of objects providing information about an + aggregation." + ::= { alcatelIND1LAGMIBGroups 1 } + + + alclnkaggAggPortListGroup OBJECT-GROUP + OBJECTS { + alclnkaggAggPortListPorts + } + STATUS current + DESCRIPTION + "A collection of objects providing information about every + port in an aggregation." + ::= { alcatelIND1LAGMIBGroups 2 } + + + alclnkaggAggPortGroup OBJECT-GROUP + OBJECTS { + alclnkaggAggPortActorSystemPriority, + alclnkaggAggPortActorSystemID, + alclnkaggAggPortActorAdminKey, + alclnkaggAggPortActorOperKey, + alclnkaggAggPortPartnerAdminSystemPriority, + alclnkaggAggPortPartnerOperSystemPriority, + alclnkaggAggPortPartnerAdminSystemID, + alclnkaggAggPortPartnerOperSystemID, + alclnkaggAggPortPartnerAdminKey, + alclnkaggAggPortPartnerOperKey, + alclnkaggAggPortSelectedAggID, + alclnkaggAggPortAttachedAggID, + alclnkaggAggPortActorPort, + alclnkaggAggPortActorPortPriority, + alclnkaggAggPortPartnerAdminPort, + alclnkaggAggPortPartnerOperPort, + alclnkaggAggPortPartnerAdminPortPriority, + alclnkaggAggPortPartnerOperPortPriority, + alclnkaggAggPortActorAdminState, + alclnkaggAggPortActorOperState, + alclnkaggAggPortPartnerAdminState, + alclnkaggAggPortPartnerOperState, + alclnkaggAggPortSelectedAggNumber, + alclnkaggAggPortGlobalPortNumber, + alclnkaggAggPortAdminState, + alclnkaggAggPortOperState, + alclnkaggAggPortState, + alclnkaggAggPortLinkState, + alclnkaggAggPortPrimary, + alclnkaggAggPortLacpType, + alclnkaggAggPortRowStatus, + alclnkaggAggPortMcLagType + } + STATUS current + DESCRIPTION + "A collection of objects providing information about every + port in an aggregation." + ::= { alcatelIND1LAGMIBGroups 3 } + + + alclnkaggAggPortStatsGroup OBJECT-GROUP + OBJECTS { + alclnkaggAggPortStatsLACPDUsRx, + alclnkaggAggPortStatsMarkerPDUsRx, + alclnkaggAggPortStatsMarkerResponsePDUsRx, + alclnkaggAggPortStatsUnknownRx, + alclnkaggAggPortStatsIllegalRx, + alclnkaggAggPortStatsLACPDUsTx, + alclnkaggAggPortStatsMarkerPDUsTx, + alclnkaggAggPortStatsMarkerResponsePDUsTx + } + STATUS current + DESCRIPTION + "A collection of objects providing information about every + port in an aggregation." + ::= { alcatelIND1LAGMIBGroups 4 } + + + alclnkaggAggPortDebugGroup OBJECT-GROUP + OBJECTS { + alclnkaggAggPortDebugRxState, + alclnkaggAggPortDebugLastRxTime, + alclnkaggAggPortDebugMuxState, + alclnkaggAggPortDebugMuxReason, + alclnkaggAggPortDebugActorChurnState, + alclnkaggAggPortDebugPartnerChurnState, + alclnkaggAggPortDebugActorChurnCount, + alclnkaggAggPortDebugPartnerChurnCount, + alclnkaggAggPortDebugActorSyncTransitionCount, + alclnkaggAggPortDebugPartnerSyncTransitionCount, + alclnkaggAggPortDebugActorChangeCount, + alclnkaggAggPortDebugPartnerChangeCount + } + STATUS current + DESCRIPTION + "A collection of objects providing debug information about. + every aggregated port." + ::= { alcatelIND1LAGMIBGroups 5 } + + + alclnkaggTablesLastChangedGroup OBJECT-GROUP + OBJECTS { + alclnkaggTablesLastChanged + } + STATUS current + DESCRIPTION + "A collection of objects providing information about the time + of changes to the configuration of aggregations and their ports." + ::= { alcatelIND1LAGMIBGroups 6 } + + + -- ------------------------------------------------------------- + -- compliance statements + -- ------------------------------------------------------------- + + + alclnkaggAggCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for device support of + Link Aggregation." + + + MODULE + MANDATORY-GROUPS { + alclnkaggAggGroup, + alclnkaggAggPortGroup, + alclnkaggTablesLastChangedGroup, + lnkaggNotificationVarsGroup + } + + + GROUP alclnkaggAggPortListGroup + DESCRIPTION + "This group is optional." + + + GROUP alclnkaggAggPortStatsGroup + DESCRIPTION + "This group is optional." + + + GROUP alclnkaggAggPortDebugGroup + DESCRIPTION + "This group is optional." + + GROUP alclnkaggAggIdAccountGroup + DESCRIPTION + "This group is optional." + + GROUP alclnkaggAggIdCounterGroup + DESCRIPTION + "This group is optional." + + GROUP alclnkaggAggIdCounterErrGroup + DESCRIPTION + "This group is optional." + + GROUP alclnkaggAggIdTrafficGroup + DESCRIPTION + "This group is optional." + + ::= { alcatelIND1LAGMIBCompliances 1 } + + + +lnkaggNotificationVarsGroup OBJECT-GROUP + OBJECTS + { + traplnkaggAggId, + traplnkaggPortIfIndex + } + STATUS current + DESCRIPTION + "Collection of objects which appear only in notifications." + ::= {alcatelIND1LAGMIBGroups 7 } + +lnkaggTrapsGroup NOTIFICATION-GROUP + NOTIFICATIONS { + lnkaggAggUp, + lnkaggAggDown, + lnkaggPortJoin, + lnkaggPortLeave, + lnkaggPortRemove + } + STATUS current + DESCRIPTION + "Collection of Traps for Link Aggregation ." + ::= { alcatelIND1LAGMIBGroups 8 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + + lnkaggNotificationVars OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 4 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + + traplnkaggAggId OBJECT-TYPE + SYNTAX Integer32 (0..32) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Index Value of Link Aggregation group ." + ::= {lnkaggNotificationVars 1 } + + traplnkaggPortIfIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Port of Link Aggregate group ." + ::= {lnkaggNotificationVars 2 } + + + + + + + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +-- NOTIFICATIONS +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx +lnkaggAggUp NOTIFICATION-TYPE + OBJECTS { + traplnkaggAggId, + traplnkaggPortIfIndex + } + STATUS current + DESCRIPTION + "The Link Aggregation is active . + This trap is sent when any one port of the link aggregation + goes to attached state." + ::= { alcatelIND1LAGMIBNotifications 1 } + + + +lnkaggAggDown NOTIFICATION-TYPE + OBJECTS { + traplnkaggAggId, + traplnkaggPortIfIndex + } + STATUS current + DESCRIPTION + "The Link Aggregation is not active . + This trap is sent when all ports of the link aggregation + goes out of attached state." + ::= { alcatelIND1LAGMIBNotifications 2 } + + + + +lnkaggPortJoin NOTIFICATION-TYPE + OBJECTS { + traplnkaggAggId, + traplnkaggPortIfIndex + } + STATUS current + DESCRIPTION + "The Link Aggregation port joins the aggregate . + This trap is sent when given port of the link aggregation + goes to attached state." + ::= { alcatelIND1LAGMIBNotifications 3 } + +lnkaggPortLeave NOTIFICATION-TYPE + OBJECTS { + traplnkaggAggId, + traplnkaggPortIfIndex + } + STATUS current + DESCRIPTION + "The Link Aggregation port leaves the aggregate . + This trap is sent when given port of the link aggregation + goes out of attached state." + ::= { alcatelIND1LAGMIBNotifications 4 } + +lnkaggPortRemove NOTIFICATION-TYPE + OBJECTS { + traplnkaggAggId, + traplnkaggPortIfIndex + } + STATUS deprecated + DESCRIPTION + "The Link Aggregation port removed from the aggregate . + This trap is sent when given port of the link aggregation + removed due to invalid configuration ." + ::= { alcatelIND1LAGMIBNotifications 5 } + + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + + alclnkaggAggConfig OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 5 } + +-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + +-- +-- Link Aggregation configuration group +-- + + alclnkAggLocalRangeOperMin OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum value of aggregate currently used for + local aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. Value -1 indicated none." + DEFVAL { 0 } + ::= { alclnkaggAggConfig 1} + + + alclnkAggLocalRangeOperMax OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum value of aggregate currently used for + local aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. Value -1 indicated none." + DEFVAL { 127 } + ::= { alclnkaggAggConfig 2} + + + alclnkAggLocalRangeConfiguredMin OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Minimum value of aggregate configured to be used for + local aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. Value -1 indicated none." + DEFVAL { 0 } + ::= { alclnkaggAggConfig 3} + + + alclnkAggLocalRangeConfiguredMax OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum value of aggregate configured to be used for + local aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. Value -1 indicated none." + DEFVAL { 127 } + ::= { alclnkaggAggConfig 4} + + + alclnkAggPeerRangeOperMin OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum value of aggregate currently used for + peer aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. + Value -1 indicated none or multi-chassis feature is not enabled." + DEFVAL { -1 } + ::= { alclnkaggAggConfig 5} + + + alclnkAggPeerRangeOperMax OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum value of aggregate currently used for + peer aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. + Value -1 indicated none or multi-chassis feature is not enabled." + DEFVAL { -1 } + ::= { alclnkaggAggConfig 6} + + + alclnkAggPeerRangeConfiguredMin OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Minimum value of aggregate configured to be used for + peer aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. + Value -1 indicated none or multi-chassis feature is not enabled." + DEFVAL { -1 } + ::= { alclnkaggAggConfig 7} + + + alclnkAggPeerRangeConfiguredMax OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum value of aggregate configured to be used for + peer aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. + Value -1 indicated none or multi-chassis feature is not enabled." + DEFVAL { -1 } + ::= { alclnkaggAggConfig 8} + + + alclnkAggMcLagRangeOperMin OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum value of aggregate currently used for + Multi Chassis aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. + Value -1 indicated none or multi-chassis feature is not enabled." + DEFVAL { -1 } + ::= { alclnkaggAggConfig 9} + + + alclnkAggMcLagRangeOperMax OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum value of aggregate currently used for + Multi Chassis aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. + Value -1 indicated none or multi-chassis feature is not enabled." + DEFVAL { -1 } + ::= { alclnkaggAggConfig 10} + + + alclnkAggMcLagRangeConfiguredMin OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Minimum value of aggregate configured to be used for + Multi Chassis aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. + Value -1 indicated none or multi-chassis feature is not enabled." + DEFVAL { -1 } + ::= { alclnkaggAggConfig 11} + + + alclnkAggMcLagRangeConfiguredMax OBJECT-TYPE + SYNTAX Integer32 ( -1 .. 127 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum value of aggregate configured to be used for + Multi Chassis aggregates. Used only when + multi-chassis aggregation enabled and chassis id is known. + Valid linkagg range is from 0 to 127. + Value -1 indicated none or multi-chassis feature is not enabled." + DEFVAL { -1 } + ::= { alclnkaggAggConfig 12} + + + alclnkaggAggConfigGroup OBJECT-GROUP + OBJECTS { + alclnkAggLocalRangeOperMin, + alclnkAggLocalRangeOperMax , + alclnkAggLocalRangeConfiguredMin, + alclnkAggLocalRangeConfiguredMax, + alclnkAggPeerRangeOperMin, + alclnkAggPeerRangeOperMax , + alclnkAggPeerRangeConfiguredMin, + alclnkAggPeerRangeConfiguredMax, + alclnkAggMcLagRangeOperMin, + alclnkAggMcLagRangeOperMax, + alclnkAggMcLagRangeConfiguredMin, + alclnkAggMcLagRangeConfiguredMax + + } + STATUS current + DESCRIPTION + "A collection of objects providing information about ranges + allowed aggregate number values." + ::= { alcatelIND1LAGMIBGroups 9 } + + + alclnkaggAggIdAccountGroup OBJECT-GROUP + OBJECTS { + alcRxUndersize, + alcTxUndersize, + alcRxOversize, + alcTxOversize, + alcRxPackets64, + alcRxPackets127, + alcRxPackets255, + alcRxPackets511, + alcRxPackets1023, + alcRxPackets1518, + alcRxPackets4095, + alcRxPackets9216, + alcRxJabberFrames + } + STATUS current + DESCRIPTION + "A collection of objects providing information about aggregate account info" + + ::= { alcatelIND1LAGMIBGroups 10 } + + + alclnkaggAggIdCounterGroup OBJECT-GROUP + OBJECTS { + alcInOctets, + alcOutOctets, + alcInUcastPkts, + alcOutUcastPkts, + alcInMcastPkts, + alcOutMcastPkts, + alcInBcastPkts, + alcOutBcastPkts, + alcInPauseFrames, + alcOutPauseFrames + } + STATUS current + DESCRIPTION + "A collection of objects providing information about aggregate counter info" + + ::= { alcatelIND1LAGMIBGroups 11 } + + alclnkaggAggIdCounterErrGroup OBJECT-GROUP + OBJECTS { + alcAlignmentsErrors, + alcFCSErrors, + alcIfInErrors, + alcIfOutErrors + } + STATUS current + DESCRIPTION + "A collection of objects providing information about aggregate counter error info" + + ::= { alcatelIND1LAGMIBGroups 12 } + + + alclnkaggAggIdTrafficGroup OBJECT-GROUP + OBJECTS { + alcInputPackets, + alcInputBytes, + alcOutputPackets, + alcOutputBytes + } + STATUS current + DESCRIPTION + "A collection of objects providing information about aggregate traffic info" + + ::= { alcatelIND1LAGMIBGroups 13 } + + + + END |