summaryrefslogtreecommitdiff
path: root/MIBS/nokia/aos7/ALCATEL-IND1-E-SERVICE-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/nokia/aos7/ALCATEL-IND1-E-SERVICE-MIB')
-rw-r--r--MIBS/nokia/aos7/ALCATEL-IND1-E-SERVICE-MIB1110
1 files changed, 1110 insertions, 0 deletions
diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-E-SERVICE-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-E-SERVICE-MIB
new file mode 100644
index 0000000..36b3806
--- /dev/null
+++ b/MIBS/nokia/aos7/ALCATEL-IND1-E-SERVICE-MIB
@@ -0,0 +1,1110 @@
+
+ALCATEL-IND1-E-SERVICE-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-IDENTITY,
+ OBJECT-TYPE,
+ Integer32 FROM SNMPv2-SMI
+ OBJECT-GROUP,
+ MODULE-COMPLIANCE FROM SNMPv2-CONF
+ softentIND1eService FROM ALCATEL-IND1-BASE
+ RowStatus,
+ TEXTUAL-CONVENTION FROM SNMPv2-TC
+ SnmpAdminString FROM SNMP-FRAMEWORK-MIB
+ InterfaceIndex FROM IF-MIB
+ ;
+
+ alcatelIND1EServiceMIB MODULE-IDENTITY
+ LAST-UPDATED "200705230000Z"
+ ORGANIZATION "Alcatel-Lucent"
+ CONTACT-INFO
+ "Please consult with Customer Service to ensure the most appropriate
+ version of this document is used with the products in question:
+
+ Alcatel-Lucent, Enterprise Solutions Division
+ (Formerly Alcatel Internetworking, Incorporated)
+ 26801 West Agoura Road
+ Agoura Hills, CA 91301-5122
+ United States Of America
+
+ Telephone: North America +1 800 995 2696
+ Latin America +1 877 919 9526
+ Europe +31 23 556 0100
+ Asia +65 394 7933
+ All Other +1 818 878 4507
+
+ Electronic Mail: support@ind.alcatel.com
+ World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
+ File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
+ DESCRIPTION
+ "The parameters for configuration of the E-Service feature.
+
+ The right to make changes in specification and other information
+ contained in this document without prior notice is reserved.
+
+ No liability shall be assumed for any incidental, indirect, special, or
+ consequential damages whatsoever arising from or related to this
+ document or the information contained herein.
+
+ Vendors, end-users, and other interested parties are granted
+ non-exclusive license to use this specification in connection with
+ management of the products for which it is intended to be used.
+
+ Copyright (C) 1995-2006 Alcatel-Lucent
+ ALL RIGHTS RESERVED WORLDWIDE"
+ ::= { softentIND1eService 1}
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- Textual Conventions
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+AlaEServiceUNIProfileProtocolTreatment ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The behavior of the bridge in regards to the given protocols packets received on
+ the UNI. Tunnel (1) enables the packets to be tunneled across the provider
+ network. Discard (2) causes the packets to be discarded and not enter
+ the provider network. Peer (3) means that on this port the bridge is to
+ participate in the protocol."
+ SYNTAX INTEGER
+ {
+ tunnel (1),
+ drop (2),
+ peer (3)
+ }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alcatelIND1eServiceMIBObjects OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch For E-Service Managed Objects."
+ ::= { alcatelIND1EServiceMIB 1 }
+
+alcatelIND1EServiceMIBConformance OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch For E-Service Conformance Information."
+ ::= { alcatelIND1EServiceMIB 2 }
+
+alcatelIND1EServiceMIBGroups OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch For E-Service Units Of Conformance."
+ ::= { alcatelIND1EServiceMIBConformance 1 }
+
+alcatelIND1EServiceMIBCompliances OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch For E-Service Compliance Statements."
+ ::= { alcatelIND1EServiceMIBConformance 2 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- The E-Service Group
+
+ alaEService OBJECT IDENTIFIER ::= { alcatelIND1eServiceMIBObjects 1 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+alaEServiceInfo OBJECT IDENTIFIER ::= { alaEService 1 }
+
+
+alaEServiceMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ legacyMode (1),
+ eServiceMode (2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The current mode configured for Vlan Stacking and Layer 2 tunnel configuration.
+ legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are
+ to be used. eServiceMode (2) indicates the commands from this MIB are to be used."
+ DEFVAL { legacyMode }
+ ::= { alaEServiceInfo 1 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- The E-Service SAP Profile Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceSapProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaEServiceSapProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains service profiles containing performance and control attributes.
+ An entry in this table is created when a new service profile is defined."
+ ::= { alaEService 2 }
+
+alaEServiceSapProfileEntry OBJECT-TYPE
+ SYNTAX AlaEServiceSapProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A E-Service Service Profile entry."
+ INDEX { IMPLIED alaEServiceSapProfileID }
+ ::= { alaEServiceSapProfileTable 1 }
+
+AlaEServiceSapProfileEntry ::= SEQUENCE
+ {
+ alaEServiceSapProfileID SnmpAdminString,
+ alaEServiceSapProfileCVLANTreatment INTEGER,
+ alaEServiceSapProfileReplacementCVLAN Integer32,
+ alaEServiceSapProfilePriorityMapMode INTEGER,
+ alaEServiceSapProfileFixedPriority Integer32,
+ alaEServiceSapProfileIngressBW Integer32,
+ alaEServiceSapProfileBandwidthShare INTEGER,
+ alaEServiceSapProfileRowStatus RowStatus,
+ alaEServiceSapProfileEgressBW Integer32
+ }
+
+alaEServiceSapProfileID OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (1..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A label given to uniquely identify this profile. Must be at least one character long."
+ ::= { alaEServiceSapProfileEntry 1 }
+
+alaEServiceSapProfileCVLANTreatment OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ stackSVLAN (1),
+ translate (2),
+ changeCVLAN (3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of VLAN stacking operation to be performed on a customer frame entering
+ this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the
+ frame before any existing 802.1Q tag. Translate (2) means to replace the existing
+ 802.1Q tag with the SVLAN. Change CVLAN (3) indicates that the customer tag is to
+ remain on the frame but its value is to be changed to the supplied value."
+ DEFVAL { stackSVLAN }
+ ::= { alaEServiceSapProfileEntry 2 }
+
+alaEServiceSapProfileReplacementCVLAN OBJECT-TYPE
+ SYNTAX Integer32 (1..4094)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The CVLAN ID to use when using the Change CVLAN treatment mode."
+ ::= { alaEServiceSapProfileEntry 3 }
+
+alaEServiceSapProfilePriorityMapMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notAssigned (0),
+ mapInnerPtoOuterP (1),
+ mapInnerDscpToOuterP(2),
+ fixedP (3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes the source of the value for the priority field of the SVLAN
+ 802.1Q tag when pre-pended to the customer data frame.NotAssigned(0), MapInnerPtoOuterP (1) uses
+ the priority field of the incoming frame when tagged to fill in the priority field
+ of the SVLAN tag. mapInnerDscpToOuterP (2) uses the frames priority bits in its IP
+ DSCP field to fill in the priority field of the SVLAN tag. FixedP (3) uses the
+ supplied FixedPriorityValue to fill in the SVLAN tag priority bits."
+ DEFVAL { fixedP }
+ ::= { alaEServiceSapProfileEntry 4 }
+
+alaEServiceSapProfileFixedPriority OBJECT-TYPE
+ SYNTAX Integer32 (0..7)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes the value of the priority field of the 802.1Q SVLAN tag
+ pre-pended to customer data frames when the fixed priority mapping mode is selected."
+ DEFVAL { 0 }
+ ::= { alaEServiceSapProfileEntry 5 }
+
+alaEServiceSapProfileIngressBW OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes this limit of ingress bandwidth for the traffic to which
+ this profile is applied. If 0, no bandwidth limit is applied. This number represents
+ traffic in units of 1,000,000 bits per second. Note that all CVLAN that belong to this
+ SAP will share this aggregated limit."
+ ::= { alaEServiceSapProfileEntry 6 }
+
+alaEServiceSapProfileBandwidthShare OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notApplicable(0),
+ shared (1),
+ notShared(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes the use of the bandwidth limit in how it is applied across
+ multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set
+ to Shared (1), all the ports that are part of the SAP will use aggregated
+ bandwidth, sharing some part of the bandwidth limit. If set to notShared (2),
+ each port will use its own bandwidth meter for this SAP. This value is not used
+ if ingressBandwidth is 0."
+ DEFVAL { shared }
+ ::= { alaEServiceSapProfileEntry 7 }
+
+alaEServiceSapProfileRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this table entry."
+ ::= { alaEServiceSapProfileEntry 8 }
+
+alaEServiceSapProfileEgressBW OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes this limit of egress bandwidth for each UNI
+ of the SAP to which this profile is applied. If 0, no bandwidth limit
+ is applied. This number represents traffic in units of Megabits per
+ second. Note that all CVLAN that belong to this SAP will share this
+ aggregated limit."
+ DEFVAL { 0 }
+ ::= { alaEServiceSapProfileEntry 9 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- The E-Service UNI Profile Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceUNIProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaEServiceUNIProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains service profiles containing performance and control attributes.
+ An entry in this table is created when a new service profile is defined."
+ ::= { alaEService 3 }
+
+alaEServiceUNIProfileEntry OBJECT-TYPE
+ SYNTAX AlaEServiceUNIProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A E-Service Service Profile entry."
+ INDEX { IMPLIED alaEServiceUNIProfileID }
+ ::= { alaEServiceUNIProfileTable 1 }
+
+AlaEServiceUNIProfileEntry ::= SEQUENCE
+ {
+ alaEServiceUNIProfileID SnmpAdminString,
+ alaEServiceUNIProfileStpBpduTreatment AlaEServiceUNIProfileProtocolTreatment,
+ alaEServiceUNIProfile8021xTreatment AlaEServiceUNIProfileProtocolTreatment,
+ alaEServiceUNIProfile8021ABTreatment AlaEServiceUNIProfileProtocolTreatment,
+ alaEServiceUNIProfile8023adTreatment AlaEServiceUNIProfileProtocolTreatment,
+ alaEServiceUNIProfileGvrpTreatment AlaEServiceUNIProfileProtocolTreatment,
+ alaEServiceUNIProfileAmapTreatment AlaEServiceUNIProfileProtocolTreatment,
+ alaEServiceUNIProfileMvrpTreatment AlaEServiceUNIProfileProtocolTreatment,
+ alaEServiceUNIProfileRowStatus RowStatus
+ }
+
+alaEServiceUNIProfileID OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (1..31))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A label given to uniquely identify this profile. Must be at least one character long."
+ ::= { alaEServiceUNIProfileEntry 1 }
+
+alaEServiceUNIProfileStpBpduTreatment OBJECT-TYPE
+ SYNTAX AlaEServiceUNIProfileProtocolTreatment
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes the behavior of the bridge in regards to the spanning tree
+ protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+ the provider network. Discard (2) causes the PDU of the protocol to be discarded
+ and not enter the provider network. Peer (3) means that on this port the bridge
+ is to participate in the protocol. Currnetly Peer is not supported for Spanning Tree"
+ DEFVAL { tunnel }
+ ::= { alaEServiceUNIProfileEntry 2 }
+
+alaEServiceUNIProfile8021xTreatment OBJECT-TYPE
+ SYNTAX AlaEServiceUNIProfileProtocolTreatment
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU
+ frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+ the provider network. Discard (2) causes the PDU of the protocol to be discarded
+ and not enter the provider network. Peer (3) means that on this port the bridge
+ is to participate in the protocol. Currnetly only drop is supported"
+ DEFVAL { drop }
+ ::= { alaEServiceUNIProfileEntry 3 }
+
+alaEServiceUNIProfile8021ABTreatment OBJECT-TYPE
+ SYNTAX AlaEServiceUNIProfileProtocolTreatment
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
+ frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+ the provider network. Discard (2) causes the PDU of the protocol to be discarded
+ and not enter the provider network. Peer (3) means that on this port the bridge
+ is to participate in the protocol. Currently only drop is supported"
+ DEFVAL { drop }
+ ::= { alaEServiceUNIProfileEntry 4 }
+
+alaEServiceUNIProfile8023adTreatment OBJECT-TYPE
+ SYNTAX AlaEServiceUNIProfileProtocolTreatment
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU
+ frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+ the provider network. Discard (2) causes the PDU of the protocol to be discarded
+ and not enter the provider network. Peer (3) means that on this port the bridge
+ is to participate in the protocol. Currently only peer is supported"
+ DEFVAL { peer }
+ ::= { alaEServiceUNIProfileEntry 5 }
+
+alaEServiceUNIProfileGvrpTreatment OBJECT-TYPE
+ SYNTAX AlaEServiceUNIProfileProtocolTreatment
+ MAX-ACCESS read-create
+ STATUS deprecated
+ DESCRIPTION
+ "This object describes the behavior of the bridge in regards to the GVRP PDU
+ frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+ the provider network. Discard (2) causes the PDU of the protocol to be discarded
+ and not enter the provider network. Peer (3) means that on this port the bridge
+ is to participate in the protocol. Currently peer is not supported for GVRP"
+ DEFVAL { tunnel }
+ ::= { alaEServiceUNIProfileEntry 6 }
+
+alaEServiceUNIProfileAmapTreatment OBJECT-TYPE
+ SYNTAX AlaEServiceUNIProfileProtocolTreatment
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes the behavior of the bridge in regards to the Alcatel
+ propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to
+ be tunneled across the provider network. Discard (2) causes the PDU of the
+ protocol to be discarded and not enter the provider network. Peer (3) means
+ that on this port the bridge is to participate in the protocol. Currently
+ drop is only supported"
+ DEFVAL { drop }
+ ::= { alaEServiceUNIProfileEntry 7 }
+
+alaEServiceUNIProfileMvrpTreatment OBJECT-TYPE
+ SYNTAX AlaEServiceUNIProfileProtocolTreatment
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object describes the behavior of the bridge in regards to the MVRP PDU
+ frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+ the provider network. Discard (2) causes the PDU of the protocol to be discarded
+ and not enter the provider network. Peer (3) means that on this port the bridge
+ is to participate in the protocol. Currently peer is not supported for MVRP"
+ DEFVAL { tunnel }
+ ::= { alaEServiceUNIProfileEntry 8 }
+
+alaEServiceUNIProfileRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this table entry."
+ ::= { alaEServiceUNIProfileEntry 9 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- The E-Service Service Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaEServiceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains the services and their assigned SVLAN for the
+ E-Service feature."
+ ::= { alaEService 4 }
+
+alaEServiceEntry OBJECT-TYPE
+ SYNTAX AlaEServiceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The svlan/ipmvlan-port association."
+ INDEX { IMPLIED alaEServiceID }
+ ::= { alaEServiceTable 1 }
+
+AlaEServiceEntry ::= SEQUENCE
+ {
+ alaEServiceID SnmpAdminString,
+ alaEServiceSVLAN Integer32,
+ alaEServiceVlanType INTEGER,
+ alaEServiceRowStatus RowStatus
+ }
+
+alaEServiceID OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A label given to uniquely identify this Service. Must be at least one character long."
+ ::= { alaEServiceEntry 1 }
+
+alaEServiceSVLAN OBJECT-TYPE
+ SYNTAX Integer32 (1..4094)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The SVLAN number of the SVLAN chosen to the be transport for this service."
+ ::= { alaEServiceEntry 2 }
+
+alaEServiceVlanType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ svlan(1),
+ ipmvlan(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of the vlan this service is going to attach to. When creating the service,
+ the type should match the vlanId specified in the request."
+ ::= { alaEServiceEntry 3 }
+
+alaEServiceRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this table entry. The supported value for set are
+ createAndGo (4) and destroy(6), to add or remove a service. When
+ creating or deleting the service, the user needs to provide both
+ the svlan and the vlantype objects."
+ ::= { alaEServiceEntry 4 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- The E-Service SAP Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+alaEServiceSapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaEServiceSapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains the Service Access Points (Sap) listed by ID.
+ This table is used to create, delete, and modify the SAP's profile"
+ ::= { alaEService 5 }
+
+alaEServiceSapEntry OBJECT-TYPE
+ SYNTAX AlaEServiceSapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The list of SAP."
+ INDEX { alaEServiceSapID}
+ ::= { alaEServiceSapTable 1 }
+
+AlaEServiceSapEntry ::= SEQUENCE
+ {
+ alaEServiceSapID Integer32,
+ alaEServiceSapServiceID SnmpAdminString,
+ alaEServiceSapProfile SnmpAdminString,
+ alaEServiceSapRowStatus RowStatus
+ }
+
+alaEServiceSapID OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A Number given to uniquely identify the SAP."
+ ::= { alaEServiceSapEntry 1 }
+
+alaEServiceSapServiceID OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A label given to uniquely identify the Service this SAP is for. Must
+ be at least one character long."
+ ::= { alaEServiceSapEntry 2 }
+
+alaEServiceSapProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The string identifying the SAP Profile this sap is to use. If specified, must match an existing
+ SAP Profile."
+ ::= { alaEServiceSapEntry 3 }
+
+alaEServiceSapRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this table entry. The supported value for set are
+ createAndGo (4) and destroy(6), to add or remove a sap. When
+ creating the sap, the user needs to provide the service name in
+ the same set request."
+ ::= { alaEServiceSapEntry 4 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- The E-Service SAP CVLAN Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceSapCvlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaEServiceSapCvlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains the Service Access Points (Sap) where the CVLANs are bound
+ to their service."
+ ::= { alaEService 6 }
+
+alaEServiceSapCvlanEntry OBJECT-TYPE
+ SYNTAX AlaEServiceSapCvlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The CVLAN to Sap binding."
+ INDEX { alaEServiceSapCvlanSapID, alaEServiceSapCvlanCvlan }
+ ::= { alaEServiceSapCvlanTable 1 }
+
+AlaEServiceSapCvlanEntry ::= SEQUENCE
+ {
+ alaEServiceSapCvlanSapID Integer32,
+ alaEServiceSapCvlanCvlan Integer32,
+ alaEServiceSapCvlanMapType INTEGER,
+ alaEServiceSapCvlanRowStatus RowStatus
+ }
+
+alaEServiceSapCvlanSapID OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A Number given to uniquely identify this SAP."
+ ::= { alaEServiceSapCvlanEntry 1 }
+
+alaEServiceSapCvlanCvlan OBJECT-TYPE
+ SYNTAX Integer32 (0..4094)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object is the CVLAN ID that this binding is targeted at. The CVLAN ID
+ may be 0, which indicates an all or untagged only mapping type."
+ ::= { alaEServiceSapCvlanEntry 2 }
+
+alaEServiceSapCvlanMapType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ single (1),
+ all(2),
+ untaggedOnly (3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is the mapping type that defines what CVLANs are mapped into this service.
+ Multiple mappings can be defined for CVLAN to service, however only one all (2) or
+ untaggedOnly (3) mapping entry can be created per UNI. A mapping type of Single (1)
+ denotes a specific CVLAN value to bind to the service. A mapping type of All (2)
+ denotes that all customer frames that do not map to any other SAP,
+ will be mapped into this service. A mapping type of Untagged (3) denotes that only
+ the untagged frames will be mapped into this service."
+ DEFVAL { single }
+ ::= { alaEServiceSapCvlanEntry 3 }
+
+alaEServiceSapCvlanRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this table entry. The supported value for set are
+ createAndGo (4) and destroy(6), to add or remove a SAP."
+ ::= { alaEServiceSapCvlanEntry 4 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- The E-Service Port Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServicePortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaEServicePortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains the ports used by the EService feature. Both UNI and NNI
+ are listed here."
+ ::= { alaEService 7 }
+
+alaEServicePortEntry OBJECT-TYPE
+ SYNTAX AlaEServicePortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The list of ports being used by EService."
+ INDEX { alaEServicePortID}
+ ::= { alaEServicePortTable 1 }
+
+AlaEServicePortEntry ::= SEQUENCE
+ {
+ alaEServicePortID InterfaceIndex,
+ alaEServicePortType INTEGER,
+ alaEServicePortVendorTpid Integer32,
+ alaEServicePortLegacyStpBpdu INTEGER,
+ alaEServicePortLegacyGvrpPdu INTEGER,
+ alaEServicePortUniProfile SnmpAdminString,
+ alaEServicePortTransBridging INTEGER,
+ alaEServicePortLegacyMvrpPdu INTEGER,
+ alaEServicePortRowStatus RowStatus
+ }
+
+alaEServicePortID OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IfIndex of this UNI or NNI Port."
+ ::= { alaEServicePortEntry 1 }
+
+alaEServicePortType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ uni (1),
+ nni (3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of port for Vlan Stacking operation. uni (1) represents a customer facing
+ port on which traffic may enter the E-Service. nni (2) respresents a provider network
+ port over which the E-Service may be connected."
+ DEFVAL { uni }
+ ::= { alaEServicePortEntry 2 }
+
+alaEServicePortVendorTpid OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "he TPID for this port if type is NNI. It is used for the incoming data
+ traffic parsing and it is substituted to the 802.1Q standard Tpid for
+ the outgoing data traffic. This is used for compatibility with other vendor
+ equipment. The default value is the standard value 0x8100."
+ DEFVAL { 33024 }
+ ::= { alaEServicePortEntry 3 }
+
+alaEServicePortLegacyStpBpdu OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notApplicable (0),
+ enable (1),
+ disable (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The legacy STP BPDU treatment for this port if NNI. It defines the type of processing
+ applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer
+ BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be
+ enabled/disabled by this object.By default the value is disabled i.e
+ provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports."
+ DEFVAL { disable }
+ ::= { alaEServicePortEntry 4 }
+
+alaEServicePortLegacyGvrpPdu OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notApplicable (0),
+ enable (1),
+ disable (2)
+ }
+ MAX-ACCESS read-create
+ STATUS deprecated
+ DESCRIPTION
+ "The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing
+ applied to GVRP PDUs on network ports. "
+ DEFVAL { disable }
+ ::= { alaEServicePortEntry 5 }
+
+alaEServicePortUniProfile OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE (1..31))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The label of an existing UNI profile that which contains various properties to be
+ applied to this port if UNI."
+ ::= { alaEServicePortEntry 6 }
+
+alaEServicePortTransBridging OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable (1),
+ disable (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Transparent Bridging status for the nni Port."
+ DEFVAL { disable }
+ ::= { alaEServicePortEntry 7 }
+
+alaEServicePortLegacyMvrpPdu OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notApplicable (0),
+ enable (1),
+ disable (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing
+ applied to MVRP PDUs on network ports. "
+ DEFVAL { disable }
+ ::= { alaEServicePortEntry 8 }
+
+alaEServicePortRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this table entry. The supported value for set are
+ createAndGo (4) and destroy(6), to add or remove a binding"
+ ::= { alaEServicePortEntry 9 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- The E-Service SAP-UNI Binding Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+alaEServiceSapUniTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaEServiceSapUniEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains the UNI that are bound to each SAP for classifying
+ traffic into each EService. Not that writing to this table may create
+ a new UNI."
+ ::= { alaEService 8 }
+
+alaEServiceSapUniEntry OBJECT-TYPE
+ SYNTAX AlaEServiceSapUniEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The list of SAP-UNI bindings being used by EService."
+ INDEX { alaEServiceSapUniSap, alaEServiceSapUniUni}
+ ::= { alaEServiceSapUniTable 1 }
+
+AlaEServiceSapUniEntry ::= SEQUENCE
+ {
+ alaEServiceSapUniSap Integer32,
+ alaEServiceSapUniUni InterfaceIndex,
+ alaEServiceSapUniRowStatus RowStatus
+ }
+
+
+alaEServiceSapUniSap OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SAP ID that is configured onto this port."
+ ::= { alaEServiceSapUniEntry 1 }
+
+alaEServiceSapUniUni OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IfIndex of this UNI Port."
+ ::= { alaEServiceSapUniEntry 2 }
+
+alaEServiceSapUniRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this table entry. The supported value for set are
+ createAndGo (4) and destroy(6), to add or remove a binding"
+ ::= { alaEServiceSapUniEntry 3 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- The E-Service NNI-SVLAN Binding Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+alaEServiceNniSvlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaEServiceNniSvlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains the SVLANs bound to each NNI for use by the
+ EService feature."
+ ::= { alaEService 9 }
+
+alaEServiceNniSvlanEntry OBJECT-TYPE
+ SYNTAX AlaEServiceNniSvlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The list of NNI-SVLAN bindings being used by EService."
+ INDEX { alaEServiceNniSvlanNni, alaEServiceNniSvlanSvlan}
+ ::= { alaEServiceNniSvlanTable 1 }
+
+AlaEServiceNniSvlanEntry ::= SEQUENCE
+ {
+ alaEServiceNniSvlanNni InterfaceIndex,
+ alaEServiceNniSvlanSvlan Integer32,
+ alaEServiceNniSvlanRowStatus RowStatus,
+ alaEServiceNniSvlanVpaType INTEGER
+ }
+
+alaEServiceNniSvlanNni OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IfIndex of this NNI Port."
+ ::= { alaEServiceNniSvlanEntry 1 }
+
+alaEServiceNniSvlanSvlan OBJECT-TYPE
+ SYNTAX Integer32 (2..4094)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SVLAN bound to this port. SVLAN cannot be 1."
+ ::= { alaEServiceNniSvlanEntry 2 }
+
+alaEServiceNniSvlanRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this table entry. The supported value for set are
+ createAndGo (4) and destroy(6), to add or remove a binding"
+ ::= { alaEServiceNniSvlanEntry 3 }
+
+-- alaEServiceNniSvlanVpaType is added in 6.3.4.R01
+
+alaEServiceNniSvlanVpaType OBJECT-TYPE
+ SYNTAX INTEGER {
+ stp (1),
+ erp (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object is used to specify whether the VPA state is to
+ be controlled by an ERP or a STP. By default VPA state is
+ controlled by STP."
+ DEFVAL { stp }
+ ::= { alaEServiceNniSvlanEntry 4 }
+
+alaEServiceGlobals OBJECT IDENTIFIER ::= { alaEService 10 }
+
+alaEServiceGlobalTransBridging OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable (1),
+ disable (2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The global transparent bridging status."
+ DEFVAL { disable }
+ ::= { alaEServiceGlobals 1 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+-- COMPLIANCE
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alcatelIND1EServiceMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "Compliance statement for E-Service."
+ MODULE MANDATORY-GROUPS
+ {
+ alaEServiceSapProfileGroup,
+ alaEServiceUNIProfileGroup,
+ alaEServiceGroup,
+ alaEServiceSapGroup,
+ alaEServiceSapUniGroup,
+ alaEServiceSapCvlanGroup,
+ alaEServicePortGroup,
+ alaEServiceNniSvlanGroup,
+ alaEServiceInfoGroup,
+ alaEServiceGlobalGroup
+ }
+ ::= { alcatelIND1EServiceMIBCompliances 1 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+-- UNITS OF CONFORMANCE
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceSapProfileGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaEServiceSapProfileCVLANTreatment,
+ alaEServiceSapProfileReplacementCVLAN,
+ alaEServiceSapProfilePriorityMapMode,
+ alaEServiceSapProfileFixedPriority,
+ alaEServiceSapProfileIngressBW,
+ alaEServiceSapProfileBandwidthShare,
+ alaEServiceSapProfileRowStatus,
+ alaEServiceSapProfileEgressBW
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of E-Service Sap Profiles."
+ ::= { alcatelIND1EServiceMIBGroups 1 }
+
+alaEServiceUNIProfileGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaEServiceUNIProfileStpBpduTreatment,
+ alaEServiceUNIProfile8021xTreatment,
+ alaEServiceUNIProfile8021ABTreatment,
+ alaEServiceUNIProfile8023adTreatment,
+ alaEServiceUNIProfileGvrpTreatment,
+ alaEServiceUNIProfileAmapTreatment,
+ alaEServiceUNIProfileMvrpTreatment,
+ alaEServiceUNIProfileRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of EService UNI Profiles."
+ ::= { alcatelIND1EServiceMIBGroups 2 }
+
+alaEServiceGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaEServiceSVLAN,
+ alaEServiceVlanType,
+ alaEServiceRowStatus
+
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of E-Services."
+ ::= { alcatelIND1EServiceMIBGroups 3 }
+
+alaEServiceSapGroup OBJECT-GROUP
+ OBJECTS
+ {
+
+ alaEServiceSapServiceID,
+ alaEServiceSapProfile,
+ alaEServiceSapRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of E-Service SAPs."
+ ::= { alcatelIND1EServiceMIBGroups 4 }
+
+alaEServiceSapCvlanGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaEServiceSapCvlanMapType,
+ alaEServiceSapCvlanRowStatus
+
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of E-Service SAP CVLAN bindings."
+ ::= { alcatelIND1EServiceMIBGroups 5 }
+
+
+alaEServicePortGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaEServicePortType,
+ alaEServicePortVendorTpid,
+ alaEServicePortLegacyStpBpdu,
+ alaEServicePortLegacyGvrpPdu,
+ alaEServicePortUniProfile,
+ alaEServicePortTransBridging,
+ alaEServicePortLegacyMvrpPdu,
+ alaEServicePortRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of E-Service Ports."
+ ::= { alcatelIND1EServiceMIBGroups 6 }
+
+alaEServiceSapUniGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaEServiceSapUniRowStatus
+
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of E-Service SAP to UNI
+ Binding."
+ ::= { alcatelIND1EServiceMIBGroups 7 }
+
+alaEServiceNniSvlanGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaEServiceNniSvlanRowStatus,
+ alaEServiceNniSvlanVpaType
+
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of E-Service SVLAN to NNI
+ Binding."
+ ::= { alcatelIND1EServiceMIBGroups 8 }
+
+
+alaEServiceInfoGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaEServiceMode
+
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of E-Service Info
+ Binding."
+ ::= { alcatelIND1EServiceMIBGroups 9 }
+
+alaEServiceGlobalGroup OBJECT-GROUP
+ OBJECTS
+ {
+ alaEServiceGlobalTransBridging
+
+ }
+ STATUS current
+ DESCRIPTION
+ "Collection of objects for management of E-Service global
+ configuration."
+ ::= { alcatelIND1EServiceMIBGroups 10 }
+END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 18:39:00 +0000