diff options
Diffstat (limited to 'MIBS/nokia/TIMETRA-CELLULAR-MIB')
| -rw-r--r-- | MIBS/nokia/TIMETRA-CELLULAR-MIB | 2544 |
1 files changed, 2544 insertions, 0 deletions
diff --git a/MIBS/nokia/TIMETRA-CELLULAR-MIB b/MIBS/nokia/TIMETRA-CELLULAR-MIB new file mode 100644 index 0000000..34f01be --- /dev/null +++ b/MIBS/nokia/TIMETRA-CELLULAR-MIB @@ -0,0 +1,2544 @@ +TIMETRA-CELLULAR-MIB DEFINITIONS ::= BEGIN + +IMPORTS + InetAddress, InetAddressType + FROM INET-ADDRESS-MIB + MODULE-COMPLIANCE, NOTIFICATION-GROUP, + OBJECT-GROUP + FROM SNMPv2-CONF + Integer32, MODULE-IDENTITY, + NOTIFICATION-TYPE, OBJECT-TYPE, + Unsigned32 + FROM SNMPv2-SMI + DateAndTime, DisplayString, RowStatus, + TEXTUAL-CONVENTION, TimeStamp, + TruthValue + FROM SNMPv2-TC + tmnxCardSlotNum, tmnxMDASlotNum + FROM TIMETRA-CHASSIS-MIB + timetraSRMIBModules, tmnxSRConfs, + tmnxSRNotifyPrefix, tmnxSRObjs + FROM TIMETRA-GLOBAL-MIB + tmnxPortNotifyPortId, tmnxPortPortID + FROM TIMETRA-PORT-MIB + TItemDescription, TNamedItemOrEmpty, + TmnxAuthPassword, TmnxEnabledDisabled, + TmnxEnabledDisabledAdminState + FROM TIMETRA-TC-MIB + ; + +timetraCellularMIBModule MODULE-IDENTITY + LAST-UPDATED "201607180000Z" + ORGANIZATION "Nokia" + CONTACT-INFO + "Nokia SROS Support + Web: http://www.nokia.com" + DESCRIPTION + "This document is the SNMP MIB module for the Nokia SROS implementation + of cellular ports. + + Copyright 2016-2018 Nokia. All rights reserved. Reproduction of this + document is authorized on the condition that the foregoing copyright + notice is included. + + This SNMP MIB module (Specification) embodies Nokia's + proprietary intellectual property. Nokia retains all + title and ownership in the Specification, including any + revisions. + + Nokia grants all interested parties a non-exclusive license to use and + distribute an unmodified copy of this Specification in connection with + management of Nokia products, and without fee, provided this copyright + notice and license appear on all copies. + + This Specification is supplied `as is', and Nokia makes no warranty, + either express or implied, as to the use, operation, condition, or + performance of the Specification." + + REVISION "201607180000Z" + DESCRIPTION + "Rev 1.0 18 Jul 2016 00:00 + Initial version of the TIMETRA-PORT-CELLULAR-MIB." + + ::= { timetraSRMIBModules 109 } + +TmnxCellularPdnProfileId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "TmnxCellularPdnProfileId identifies a specific Packet Data Network + profile in the system." + SYNTAX Unsigned32 (0..15) + +TmnxCellularAccessPointName ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxCellularAccessPointName represents a cellular Access + Point Name (APN)." + REFERENCE + "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation + Partnership Project; Technical Specification Group Core Network + and Terminals; Numbering, addressing and identification', + 3GPP, June 2016, Section 9, 'Definition of Access Point Name'" + SYNTAX DisplayString (SIZE (0..100)) + +TmnxCellularImei ::= TEXTUAL-CONVENTION + DISPLAY-HINT "2a-6a-6a-2a" + STATUS current + DESCRIPTION + "The data type TmnxCellularImei represents an International Mobile + Station Equipment Identity (IMEI) number." + REFERENCE + "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation + Partnership Project; Technical Specification Group Core Network + and Terminals; Numbering, addressing and identification', + 3GPP, June 2016, Section 6, 'International Mobile Station + Equipment Identity and Software Version Number'" + SYNTAX DisplayString (SIZE (0|15..16)) + +TmnxCellularSimCardNumber ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "TmnxCellularSimCardNumber identifies a specific cellular Subscriber + Identity Module (SIM) card in a system." + SYNTAX Unsigned32 (1..2) + +TmnxCellularSimCardIccid ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxCellularSimCardIccid represents an Integrated + Circuit Card Identifier (ICCID). Each SIM card has a unique + ICCID." + REFERENCE + "ITU-T E.118, 'The international telecommunication charge card', + ITU-T, May 2006, Section 4, 'Numbering system'" + SYNTAX DisplayString (SIZE (0..20)) + +TmnxCellularImsi ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The data type TmnxCellularImsi represents an International + Mobile Subscriber Identity. An IMSI uniquely identifies a + mobile subscriber." + REFERENCE + "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation + Partnership Project; Technical Specification Group Core Network + and Terminals; Numbering, addressing and identification', + 3GPP, June 2016, Section 2, 'Identification of mobile subscribers'" + SYNTAX DisplayString (SIZE (0..15)) + +TmnxCellularPdnId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "TmnxCellularPdnId identifies a specific Packet Data Network (PDN) on a + cellular port." + SYNTAX Unsigned32 (1) + +TmnxCellularChannelNumber ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "TmnxCellularChannelNumber identifies an channel number. For LTE, + this is an E-UTRA Absolute Radio Frequency Channel Number (EARFCN), + as described in 3GPP TS 36.101." + REFERENCE + "3GPP TS 36.101 version 14.1.0 Release 14, '3rd Generation + Partnership Project; Technical Specification Group Radio Access + Network; Evolved Universal Terrestrial Radio Access (E-UTRA); + User Equipment (UE) radio transmission and reception (Release 14), + 3GPP, September 2016, Table 5.7.3-1, 'E-UTRA channel numbers" + SYNTAX Unsigned32 (0..262143) + +TmnxCellularBearerRate ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "TmnxCellularBearerRate identifies a bit rate of a bearer on a cellular + interface, in kbit/s." + SYNTAX Unsigned32 (0..100000) + +tmnxCellularObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 109 } + +tmnxCellularConfigObjs OBJECT IDENTIFIER ::= { tmnxCellularObjs 2 } + +tmnxCellularConfigTimestamps OBJECT IDENTIFIER ::= { tmnxCellularConfigObjs 1 } + +tmnxCellPdnProfileTblLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfileTblLastChanged indicates the sysUpTime + at the time of the most recent management-initiated change to the + table tmnxCellularPdnProfileTable." + ::= { tmnxCellularConfigTimestamps 1 } + +tmnxCellSimCardTableLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardTableLastChanged indicates the sysUpTime + at the time of the most recent management-initiated change to the + table tmnxCellularSimCardTable." + ::= { tmnxCellularConfigTimestamps 2 } + +tmnxCellPdnTblLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnTblLastChanged indicates the sysUpTime at the + time of the most recent management-initiated change to the table + tmnxCellularPdnTable." + ::= { tmnxCellularConfigTimestamps 3 } + +tmnxCellPortTblLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortTblLastChanged indicates the sysUpTime at the + time of the most recent management-initiated change to the table + tmnxCellularPortTable." + ::= { tmnxCellularConfigTimestamps 4 } + +tmnxCellPortCbsdAuthCfgTblLstChg OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthCfgTblLstChg indicates the sysUpTime + at the time of the most recent management-initiated change to the + table tmnxCellPortCbsdAuthCfgTable." + ::= { tmnxCellularConfigTimestamps 5 } + +tmnxCellularSystemConfigObjs OBJECT IDENTIFIER ::= { tmnxCellularConfigObjs 2 } + +tmnxCellularPdnProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellPdnProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularPdnProfileTable has a series of configurations, + applicable to cellular Packet Data Networks, which are indexed by a + PDN profile number." + ::= { tmnxCellularSystemConfigObjs 1 } + +tmnxCellPdnProfileEntry OBJECT-TYPE + SYNTAX TmnxCellPdnProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a specific PDN profile. + + The system automatically creates one entry, at index 0, to represent + the default PDN profile. The user cannot modify the configuration + of this default profile. + + Other entries can be created and deleted via SNMP SET operations, and + the user can modify the configuration of those entries." + INDEX { tmnxCellPdnProfileId } + ::= { tmnxCellularPdnProfileTable 1 } + +TmnxCellPdnProfileEntry ::= SEQUENCE +{ + tmnxCellPdnProfileId TmnxCellularPdnProfileId, + tmnxCellPdnProfRowStatus RowStatus, + tmnxCellPdnProfLastChanged TimeStamp, + tmnxCellPdnProfDescription TItemDescription, + tmnxCellPdnProfApn TmnxCellularAccessPointName, + tmnxCellPdnProfAuthType INTEGER, + tmnxCellPdnProfUsername DisplayString, + tmnxCellPdnProfPassword TmnxAuthPassword, + tmnxCellPdnProfProtocol INTEGER +} + +tmnxCellPdnProfileId OBJECT-TYPE + SYNTAX TmnxCellularPdnProfileId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfileId specifies the number of a specific + PDN profile configured in the system. + + The value 0 is reserved for a default profile, which is automatically + created by the system, and cannot be modified or deleted by the user." + ::= { tmnxCellPdnProfileEntry 1 } + +tmnxCellPdnProfRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfRowStatus specifies the row status of the + PDN profile entry. It is used to control the creation and deletion of + PDN profiles. + + The user cannot delete the PDN profile whose tmnxCellPdnProfileId has + a value of 0." + ::= { tmnxCellPdnProfileEntry 2 } + +tmnxCellPdnProfLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfLastChanged indicates the sysUpTime at the + time of the most recent management-initiated change to this table row. + + For the default PDN profile, tmnxCellPdnProfLastChanged has a value of + 0" + ::= { tmnxCellPdnProfileEntry 3 } + +tmnxCellPdnProfDescription OBJECT-TYPE + SYNTAX TItemDescription + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfDescription specifies a user provided + description for this PDN profile. + + For the default PDN profile, tmnxCellPdnProfDescription has a value of + 'default profile'" + DEFVAL { ''H } + ::= { tmnxCellPdnProfileEntry 4 } + +tmnxCellPdnProfApn OBJECT-TYPE + SYNTAX TmnxCellularAccessPointName + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfApn specifies the APN for this PDN. + + The cellular service provider may require the user to program the APN + value in order to use the service. + + For the default PDN profile, tmnxCellPdnProfApn has a value of the + empty string" + DEFVAL { ''H } + ::= { tmnxCellPdnProfileEntry 5 } + +tmnxCellPdnProfAuthType OBJECT-TYPE + SYNTAX INTEGER { + none (0), + pap (1), + chap (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfAuthType specifies the method of + authentication used on the PDN. + + For the default PDN profile, tmnxCellPdnProfAuthType has a value of + 'none (0)'." + DEFVAL { none } + ::= { tmnxCellPdnProfileEntry 6 } + +tmnxCellPdnProfUsername OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfUsername specifies the username when + authenticating the PDN. + + For the default PDN profile, tmnxCellPdnProfUsername has a value of + the empty string." + DEFVAL { ''H } + ::= { tmnxCellPdnProfileEntry 7 } + +tmnxCellPdnProfPassword OBJECT-TYPE + SYNTAX TmnxAuthPassword + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfPassword specifies the password when + authenticating the PDN. + + A get request on this object always returns an empty string. + + For the default PDN profile, tmnxCellPdnProfPassword has a value of + the empty string." + DEFVAL { ''H } + ::= { tmnxCellPdnProfileEntry 8 } + +tmnxCellPdnProfProtocol OBJECT-TYPE + SYNTAX INTEGER { + ipv4 (1), + ipv6 (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfProtocol specifies whether the PDN shall + use IPv4 or IPv6 addresses. + + For the default PDN profile, tmnxCellPdnProfProtocol has a value of + ipv4." + DEFVAL { ipv4 } + ::= { tmnxCellPdnProfileEntry 9 } + +tmnxCellularPortConfigObjs OBJECT IDENTIFIER ::= { tmnxCellularConfigObjs 3 } + +tmnxCellularSimCardTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellularSimCardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularSimCardTable has an entry for each SIM card in the + system." + ::= { tmnxCellularPortConfigObjs 1 } + +tmnxCellularSimCardEntry OBJECT-TYPE + SYNTAX TmnxCellularSimCardEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a SIM card for a cellular port in the + system. Entries are automatically created by the system, and cannot be + created or deleted via SNMP SET operations. + + The system creates an entry for each possible SIM card that can + be installed into the system. Each SIM card is associated with a + specific cellular port in the system." + INDEX { + tmnxPortPortID, + tmnxCellSimCardId + } + ::= { tmnxCellularSimCardTable 1 } + +TmnxCellularSimCardEntry ::= SEQUENCE +{ + tmnxCellSimCardId TmnxCellularSimCardNumber, + tmnxCellSimCardLastChanged TimeStamp, + tmnxCellSimCardDescription TItemDescription, + tmnxCellSimCardPin OCTET STRING, + tmnxCellSimCardFailureDuration Unsigned32, + tmnxCellSimCardPortStateSwitch TruthValue, + tmnxCellSimCardBgpStateSwitch TruthValue +} + +tmnxCellSimCardId OBJECT-TYPE + SYNTAX TmnxCellularSimCardNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardId specifies a SIM card on a cellular + port." + ::= { tmnxCellularSimCardEntry 1 } + +tmnxCellSimCardLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardLastChanged indicates the sysUpTime at the + time of the most recent management-initiated change to this table row." + ::= { tmnxCellularSimCardEntry 2 } + +tmnxCellSimCardDescription OBJECT-TYPE + SYNTAX TItemDescription + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardDescription specifies a user provided + description for this SIM card." + DEFVAL { ''H } + ::= { tmnxCellularSimCardEntry 3 } + +tmnxCellSimCardPin OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0|4..8)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardPin specifies the Personal + Identification Number of the SIM card. This is required + in order to access a locked SIM card. + + A get request on this object always returns an empty string." + DEFVAL { ''H } + ::= { tmnxCellularSimCardEntry 4 } + +tmnxCellSimCardFailureDuration OBJECT-TYPE + SYNTAX Unsigned32 (1..60) + UNITS "minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardFailureDuration specifies the amount or + time that the system will wait before switching SIM cards. + + The system will only automatically switch SIM cards if + tmnxCellMdaAdminActiveSim is set to 'automatic', and + if the failover criteria is met. The value of + tmnxCellSimCardPortStateSwitch and tmnxCellSimCardBgpStateSwitch + control the failover criteria." + DEFVAL { 5 } + ::= { tmnxCellularSimCardEntry 5 } + +tmnxCellSimCardPortStateSwitch OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardPortStateSwitch specifies whether or not + the system will automatically switch to the other SIM card if the port + corresponding to this SIM card remains operationally down for the + duration specified by tmnxCellSimCardFailureDuration. + + The system will only automatically switch SIM cards if + tmnxCellMdaAdminActiveSim is set to 'automatic'. + + At least one of the SIM switch criteria tmnxCellSimCardPortStateSwitch + or tmnxCellSimCardBgpStateSwitch must be enabled for a given SIM card." + DEFVAL { true } + ::= { tmnxCellularSimCardEntry 6 } + +tmnxCellSimCardBgpStateSwitch OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardBgpStateSwitch specifies whether or not + the system will automatically switch to the other SIM card if all BGP + sessions corresponding to this SIM card are not established for the + duration specified by tmnxCellSimCardFailureDuration. + + The system will only automatically switch SIM cards if + tmnxCellMdaAdminActiveSim is set to 'automatic'. + + At least one of the SIM switch criteria tmnxCellSimCardPortStateSwitch + or tmnxCellSimCardBgpStateSwitch must be enabled for a given SIM card." + DEFVAL { false } + ::= { tmnxCellularSimCardEntry 7 } + +tmnxCellularPdnTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellularPdnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularPdnTable has a series of configurations for Packet + Data Networks (PDNs), which are configured against a cellular port and + associated with a specific SIM card." + ::= { tmnxCellularPortConfigObjs 2 } + +tmnxCellularPdnEntry OBJECT-TYPE + SYNTAX TmnxCellularPdnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a specific Packet Data Network. + + A Packet Data Network is associated with a specific cellular port and + SIM card. + + Entries can be created and deleted via SNMP SET operations." + INDEX { + tmnxPortPortID, + tmnxCellPdnId + } + ::= { tmnxCellularPdnTable 1 } + +TmnxCellularPdnEntry ::= SEQUENCE +{ + tmnxCellPdnId TmnxCellularPdnId, + tmnxCellPdnRowStatus RowStatus, + tmnxCellPdnLastChanged TimeStamp, + tmnxCellPdnProfile TmnxCellularPdnProfileId +} + +tmnxCellPdnId OBJECT-TYPE + SYNTAX TmnxCellularPdnId + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of tmnxCellPdnId specifies a Packet Data Network on a + cellular port." + ::= { tmnxCellularPdnEntry 1 } + +tmnxCellPdnRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of tmnxCellPdnRowStatus specifies the row status of the PDN + entry. It is used to control the creation and deletion of Packet Data + Networks on a cellular port." + ::= { tmnxCellularPdnEntry 2 } + +tmnxCellPdnLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnLastChanged indicates the sysUpTime at the + time of the most recent management-initiated change to this table row." + ::= { tmnxCellularPdnEntry 3 } + +tmnxCellPdnProfile OBJECT-TYPE + SYNTAX TmnxCellularPdnProfileId + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of tmnxCellPdnProfile specifies the PDN profile that + is associated with this Packet Data Network. The configuration of a + PDN is contained corresponding table row of + tmnxCellularPdnProfileTable." + DEFVAL { 0 } + ::= { tmnxCellularPdnEntry 4 } + +tmnxCellularPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellularPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularPortTable has an entry for each cellular port in the + system." + ::= { tmnxCellularPortConfigObjs 3 } + +tmnxCellularPortEntry OBJECT-TYPE + SYNTAX TmnxCellularPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a cellular port in the system. Entries are + automatically created by the system, and cannot be created or deleted + via SNMP SET operations." + INDEX { tmnxPortPortID } + ::= { tmnxCellularPortTable 1 } + +TmnxCellularPortEntry ::= SEQUENCE +{ + tmnxCellPortLastChanged TimeStamp, + tmnxCellPortBand125MaxPowerLevel Unsigned32, + tmnxCellPortSyncSysTime TruthValue +} + +tmnxCellPortLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortLastChanged indicates the sysUpTime at the + time of the most recent management-initiated change to this table row." + ::= { tmnxCellularPortEntry 1 } + +tmnxCellPortBand125MaxPowerLevel OBJECT-TYPE + SYNTAX Unsigned32 (1..20) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellPortBand125MaxPowerLevel specifies the maximum + power level that may be transmitted by the band 125 LTE radio on some + variants of the SAR-Hm. + + A value of 1 specifies that the radio may transmit at its maximum + power level. Higher values reduce the maximum transmitted power + level of the band 125 radio, with a value of 20 specifying the lowest + maximum power level." + REFERENCE + "7705 SAR-Hm, Release 15.0.R4, 'SAR-Hm Chassis Installation Guide', + Nokia, October 2017, Section 4.9 'Site Preparation and Engineering + Guidelines for 7705 SAR-Hm B125 Antennas'" + DEFVAL { 1 } + ::= { tmnxCellularPortEntry 2 } + +tmnxCellPortSyncSysTime OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellPortSyncSysTime specifies whether the system time + is synchronized on the cellular port." + DEFVAL { false } + ::= { tmnxCellularPortEntry 3 } + +tmnxCellularMdaTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellularMdaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularMdaTable has an entry for each cellular MDA in the + system." + ::= { tmnxCellularPortConfigObjs 4 } + +tmnxCellularMdaEntry OBJECT-TYPE + SYNTAX TmnxCellularMdaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a cellular MDA in the system. Entries are + automatically created by the system, and cannot be created or deleted + via SNMP SET operations." + INDEX { + tmnxCardSlotNum, + tmnxMDASlotNum + } + ::= { tmnxCellularMdaTable 1 } + +TmnxCellularMdaEntry ::= SEQUENCE +{ + tmnxCellMdaLastChanged TimeStamp, + tmnxCellMdaAdminActiveSim INTEGER, + tmnxCellMdaDownResetInterval Unsigned32, + tmnxCellMdaDownResetCriteria BITS, + tmnxCellMdaDownResetPending TruthValue, + tmnxCellMdaDownResetTime Unsigned32, + tmnxCellMdaPreferredSim TmnxCellularSimCardNumber, + tmnxCellMdaOperActiveSim TmnxCellularSimCardNumber, + tmnxCellMdaSimCardSwitchPending TruthValue, + tmnxCellMdaSimCardSwitchTime Unsigned32, + tmnxCellMdaSimCardLastSwitchTime TimeStamp, + tmnxCellMdaSimLastSwitchReason INTEGER, + tmnxCellMdaSpecFirmwareVersion DisplayString, + tmnxCellMdaMaxTxPower Integer32 +} + +tmnxCellMdaLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellMdaLastChanged indicates the sysUpTime at the + time of the most recent management-initiated change to this table row." + ::= { tmnxCellularMdaEntry 1 } + +tmnxCellMdaAdminActiveSim OBJECT-TYPE + SYNTAX INTEGER { + sim-1 (1), + sim-2 (2), + automatic (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellMdaAdminActiveSim specifies which SIM card shall + be active on the MDA. + + A value of 'sim-1' or 'sim-2' specifies that the system will use the SIM card + in that slot as the active SIM card. If there is no SIM card in that + slot, or if the system cannot establish service using that SIM card, the + system will continue to use that SIM card, regardless of the contents of + the other SIM card slot. + + A value of 'automatic' specifies that the system will automatically + switch between SIM cards if it cannot establish service." + DEFVAL { sim-1 } + ::= { tmnxCellularMdaEntry 2 } + +tmnxCellMdaDownResetInterval OBJECT-TYPE + SYNTAX Unsigned32 (0..240) + UNITS "minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellMdaDownResetInterval specifies the interval, in + minutes, after which the system will reset if it cannot establish + service over the cellular interface. + + A value of 0 specifies that the system will not reset if it cannot + establish service over the cellular interface." + DEFVAL { 0 } + ::= { tmnxCellularMdaEntry 3 } + +tmnxCellMdaDownResetCriteria OBJECT-TYPE + SYNTAX BITS { + port (0), + bgp (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellMdaDownResetCriteria specifies the criteria to + decide whether or not service is operational over the cellular + interface. + + If the 'port' bit is set, cellular service is deemed inoperational if + no cellular port is operationally up. + + If the 'bgp' bit is set, cellular service is deemed inoperational if + there is no BGP peer established with a configured local address + corresponding to a cellular interface. + + Multiple bits may be set simultaneously. If so, the system evaluates + each criterion independently." + DEFVAL { { port } } + ::= { tmnxCellularMdaEntry 4 } + +tmnxCellMdaDownResetPending OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellMdaDownResetPending indicates if the current + state of the system will cause the system to reset, due to the + criteria configured by tmnxCellMdaDownResetCriteria. + + If the system remains in this state for the duration indicated by + tmnxCellMdaDownResetInterval, it will automatically reset. + + This value will only be true if tmnxCellMdaDownResetInterval is + configured to a non-zero value." + ::= { tmnxCellularMdaEntry 5 } + +tmnxCellMdaDownResetTime OBJECT-TYPE + SYNTAX Unsigned32 (0..14400) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellMdaDownResetTime indicates the amount of time + remaining before the system will reset, due to the criteria specified + by tmnxCellMdaDownResetCriteria. + + If tmnxCellMdaDownResetPending is false, tmnxCellMdaDownResetTime will + have a value of 0." + ::= { tmnxCellularMdaEntry 6 } + +tmnxCellMdaPreferredSim OBJECT-TYPE + SYNTAX TmnxCellularSimCardNumber + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellMdaPreferredSim specifies which SIM card shall be + used as the active SIM upon system initialization when + tmnxCellMdaAdminActiveSim is set to 'automatic'." + DEFVAL { 1 } + ::= { tmnxCellularMdaEntry 7 } + +tmnxCellMdaOperActiveSim OBJECT-TYPE + SYNTAX TmnxCellularSimCardNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellMdaOperActiveSim indicates which SIM card is + active on the MDA." + ::= { tmnxCellularMdaEntry 8 } + +tmnxCellMdaSimCardSwitchPending OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellMdaSimCardSwitchPending indicates if the current + state of the system will cause a SIM switch. + + If the system remains in this state for the duration indicated by + tmnxCellMdaSimCardSwitchTime, it will automatically switch the MDA to + use the other SIM card. + + This value will only be true if tmnxCellMdaAdminActiveSim is set to + 'automatic'." + ::= { tmnxCellularMdaEntry 9 } + +tmnxCellMdaSimCardSwitchTime OBJECT-TYPE + SYNTAX Unsigned32 (0..3600) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellMdaSimCardSwitchTime indicates the amount of time + remaining before the system will automatically switch SIM cards if the + system remains in its current state. + + If tmnxCellMdaSimCardSwitchPending is false, + tmnxCellMdaSimCardSwitchTime will have a value of 0." + ::= { tmnxCellularMdaEntry 10 } + +tmnxCellMdaSimCardLastSwitchTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellMdaSimCardLastSwitchTime indicates the value of + sysUpTime the last time that the system switched the operationally + active SIM card on the cellular MDA. + + If the system has not switched the active SIM card, + tmnxCellMdaSimCardLastSwitchTime will have a value of 0." + ::= { tmnxCellularMdaEntry 11 } + +tmnxCellMdaSimLastSwitchReason OBJECT-TYPE + SYNTAX INTEGER { + none (0), + manual-configuration (1), + forced-switch (2), + cellular-port-down (3), + no-bgp-neighbor (4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellMdaSimLastSwitchReason indicates the reason why + the system last switched the operationally active SIM card on the + cellular MDA. + + If the system has not switched the active SIM card, + tmnxCellMdaSimLastSwitchReason will have a value of 'none'." + ::= { tmnxCellularMdaEntry 12 } + +tmnxCellMdaSpecFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellMdaSpecFirmwareVersion indicates the firmware + version that the system is configured to use on the cellular modem. + + An empty string indicates that the user has not specified that the + system should use different modem firmware than the version that is + bundled within SROS." + ::= { tmnxCellularMdaEntry 13 } + +tmnxCellMdaMaxTxPower OBJECT-TYPE + SYNTAX Integer32 (1..23) + UNITS "decibel-milliwatts" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellMdaMaxTxPower specifies the maximum transmit + power of the cellular interface on the MDA. This object only applies + to platforms with cellular interfaces that support Citizen's Broadband + Radio Service (CBRS) frequency bands. On those platforms, this value + specifies the maximum transmit power regardless of the frequency band. + On platforms that do not support CBRS frequency bands, the value of + tmnxCellMdaMaxTxPower has no effect." + DEFVAL { 23 } + ::= { tmnxCellularMdaEntry 14 } + +tmnxCellPortCbsdAuthCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellPortCbsdAuthCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellPortCbsdAuthCfgTable has an entry for each cellular port + in the system pertaining to CBSD authorization configuration." + ::= { tmnxCellularPortConfigObjs 5 } + +tmnxCellPortCbsdAuthCfgEntry OBJECT-TYPE + SYNTAX TmnxCellPortCbsdAuthCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents the CBSD authorization configuration for a + cellular port in the system. Entries are automatically created by the + system, and cannot be created or deleted via SNMP SET operations." + AUGMENTS { tmnxCellularPortEntry } + ::= { tmnxCellPortCbsdAuthCfgTable 1 } + +TmnxCellPortCbsdAuthCfgEntry ::= SEQUENCE +{ + tmnxCellPortCbsdAuthCfgLstChange TimeStamp, + tmnxCellPortCbsdAuthAdminState TmnxEnabledDisabledAdminState, + tmnxCellPortCbsdAuthUserId DisplayString, + tmnxCellPortCbsdAuthAntennaGain Unsigned32, + tmnxCellPortCbsdAuthClntTlsProf TNamedItemOrEmpty, + tmnxCellPortCbsdAuthPriSasSvrUrl DisplayString, + tmnxCellPortCbsdAuthSecSasSvrUrl DisplayString, + tmnxCellPortCbsdAuthCategory INTEGER +} + +tmnxCellPortCbsdAuthCfgLstChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthCfgLstChange indicates the sysUpTime + at the time of the most recent management-initiated change to this + table row." + ::= { tmnxCellPortCbsdAuthCfgEntry 1 } + +tmnxCellPortCbsdAuthAdminState OBJECT-TYPE + SYNTAX TmnxEnabledDisabledAdminState + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthAdminState specifies the + administrative state of the CBSD authorization for the cellular port." + DEFVAL { disabled } + ::= { tmnxCellPortCbsdAuthCfgEntry 2 } + +tmnxCellPortCbsdAuthUserId OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..253)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthUserId specifies the CBSD + authorization user ID for the cellular port." + DEFVAL { "" } + ::= { tmnxCellPortCbsdAuthCfgEntry 3 } + +tmnxCellPortCbsdAuthAntennaGain OBJECT-TYPE + SYNTAX Unsigned32 (0..14) + UNITS "decibel-milliwatts" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthAntennaGain specifies the CBSD + authorization antenna gain for the cellular port." + DEFVAL { 0 } + ::= { tmnxCellPortCbsdAuthCfgEntry 4 } + +tmnxCellPortCbsdAuthClntTlsProf OBJECT-TYPE + SYNTAX TNamedItemOrEmpty + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthClntTlsProf specifies the CBSD + authorization client TLS profile name for the cellular port." + DEFVAL { "" } + ::= { tmnxCellPortCbsdAuthCfgEntry 5 } + +tmnxCellPortCbsdAuthPriSasSvrUrl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthPriSasSvrUrl specifies the CBSD + authorization primary SAS server for the cellular port." + DEFVAL { "" } + ::= { tmnxCellPortCbsdAuthCfgEntry 6 } + +tmnxCellPortCbsdAuthSecSasSvrUrl OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthSecSasSvrUrl specifies the CBSD + authorization secondary SAS server for the cellular port." + DEFVAL { "" } + ::= { tmnxCellPortCbsdAuthCfgEntry 7 } + +tmnxCellPortCbsdAuthCategory OBJECT-TYPE + SYNTAX INTEGER { + a (1), + b (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthCategory specifies the CBSD + authorization category." + DEFVAL { a } + ::= { tmnxCellPortCbsdAuthCfgEntry 8 } + +tmnxCellularStatusObjs OBJECT IDENTIFIER ::= { tmnxCellularObjs 3 } + +tmnxCellularPortStatusObjs OBJECT IDENTIFIER ::= { tmnxCellularStatusObjs 1 } + +tmnxCellularPortStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellularPortStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularPortStatusTable has an entry for each cellular port in + the system." + ::= { tmnxCellularPortStatusObjs 1 } + +tmnxCellularPortStatusEntry OBJECT-TYPE + SYNTAX TmnxCellularPortStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a cellular port in the system. Entries + are automatically created by the system, and cannot be created or + deleted via SNMP SET operations. + + The tmnxCellularPortStatusEntry contains attributes that are unique to + the Cellular TmnxPortType." + INDEX { tmnxPortPortID } + ::= { tmnxCellularPortStatusTable 1 } + +TmnxCellularPortStatusEntry ::= SEQUENCE +{ + tmnxCellPortImei TmnxCellularImei, + tmnxCellPortRegistrationStatus INTEGER, + tmnxCellPortWirelessTechnology INTEGER, + tmnxCellPortFrequencyBand Unsigned32, + tmnxCellPortChannelNumber TmnxCellularChannelNumber, + tmnxCellPortAreaCode DisplayString, + tmnxCellPortCellIdentity DisplayString, + tmnxCellPortRssi Integer32, + tmnxCellPortRsrp Integer32, + tmnxCellPortRscp Integer32, + tmnxCellPortRsrq Integer32, + tmnxCellPortSinr Integer32 +} + +tmnxCellPortImei OBJECT-TYPE + SYNTAX TmnxCellularImei + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortImei indicates the International Mobile + Station Equipment Identity number assigned to this cellular port." + ::= { tmnxCellularPortStatusEntry 1 } + +tmnxCellPortRegistrationStatus OBJECT-TYPE + SYNTAX INTEGER { + not-registered (0), + registered-home (1), + searching (2), + denied (3), + no-network (4), + registered-roaming (5), + sms-only-home (6), + sms-only-roaming (7), + emergency-only (8), + csfb-not-preferred-home (9), + csfb-not-preferred-roaming (10) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortRegistrationStatus indicates the Evolved + Packet System (EPS) network registration status of the cellular port." + REFERENCE + "3GPP TS 27.007 version 14.0.0 Release 14, '3rd Generation Partnership Project; + Technical Specification Group Core Network and Terminals; AT command + set for User Equipment (UE)', 3GPP, December 2016, Section 10.1.22, + 'EPS network registration status +CEREG'" + ::= { tmnxCellularPortStatusEntry 2 } + +tmnxCellPortWirelessTechnology OBJECT-TYPE + SYNTAX INTEGER { + none (0), + lte (1), + wcdma (2), + gsm (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortWirelessTechnology indicates the wireless + technology currently in use on the cellular port." + ::= { tmnxCellularPortStatusEntry 3 } + +tmnxCellPortFrequencyBand OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortFrequencyBand indicates the frequency band + currently in use by the cellular port. + + For LTE, this is an E-UTRA Operating Band, as listed in Table 5.5-1 of + 3GPP TS 36.101." + REFERENCE + "3GPP TS 36.101 version 14.1.0 (2016-09), '3rd Generation + Partnership Project; Technical Specification Group Radio Access + Network; Evolved Universal Terrestrial Radio Access (E-UTRA); + User Equipment (UE) radio transmission and reception, + 3GPP, September 2016, Table 5.5-1, 'E-UTRA operating bands'" + ::= { tmnxCellularPortStatusEntry 4 } + +tmnxCellPortChannelNumber OBJECT-TYPE + SYNTAX TmnxCellularChannelNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortChannelNumber indicates the channel number + currently in use." + ::= { tmnxCellularPortStatusEntry 5 } + +tmnxCellPortAreaCode OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..4)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortAreaCode indicates the tracking area code or + location area code currently in use." + REFERENCE + "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation + Partnership Project; Technical Specification Group Core Network + and Terminals; Numbering, addressing and identification', + 3GPP, June 2016, Section 19.4.2.3 'Tracking Area Identity (TAI)'; + Section 4.1, 'Composition of the Location Area Identification (LAI)'" + ::= { tmnxCellularPortStatusEntry 6 } + +tmnxCellPortCellIdentity OBJECT-TYPE + SYNTAX DisplayString (SIZE (8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCellIdentity indicates the + GERAN/UTRAN/E-UTRAN cell identity of the cell currently in use." + REFERENCE + "3GPP TS 23.003 version 14.0.0 Release 14, '3rd Generation + Partnership Project; Technical Specification Group Core Network + and Terminals; Numbering, addressing and identification', + 3GPP, June 2016, Section 4.3.1 'Cell Identity (CI) and Cell Global + Identification (CGI)'" + ::= { tmnxCellularPortStatusEntry 7 } + +tmnxCellPortRssi OBJECT-TYPE + SYNTAX Integer32 (-113..-51 | 0) + UNITS "decibel-milliwatts" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortRssi indicates the received signal strength, + in decibel-milliwatts. + + A value of -113 indicates that the signal strength is -113 dBm or + less, while a value of -51 indicates that the signal strength is -51 + dBm or greater. + + A value of 0 indicates that the signal strength is not known or not + detectable." + ::= { tmnxCellularPortStatusEntry 8 } + +tmnxCellPortRsrp OBJECT-TYPE + SYNTAX Integer32 (-140..-44 | 0) + UNITS "decibel-milliwatts" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortRsrp indicates the reference signal received + power, in decibel-milliwatts. + + A value of -140 indicates that the received power is -140 dBm or less, + while a value of -44 indicates that the received power is -44 dBm or + greater. + + A value of 0 indicates that the reference signal received power has + not been measured." + REFERENCE + "3GPP TS 36.133 version 14.3.0 Release 14, '3rd Generation + Partnership Project; Technical Specification Group Radio + Access Network; Evolved Universal Terrestrial Radio Access + (E-UTRA); Requirements for support of radio resource management', + 3GPP, March 2017, Section 9.1.4 'RSRP Measurement Report Mapping'" + ::= { tmnxCellularPortStatusEntry 9 } + +tmnxCellPortRscp OBJECT-TYPE + SYNTAX Integer32 (-120..-25 | 0) + UNITS "decibel-milliwatts" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortRscp indicates the received signal code + power, in decibel-milliwatts. + + A value of -120 indicates that the received power is -120 dBm or less, + while a value of -25 indicates that the received power is -25 dBm or + greater. + + A value of 0 indicates that the received signal code power is not + known or not detectable." + REFERENCE + "3GPP TS 27.007 version 14.0.0 Release 14, '3rd Generation Partnership Project; + Technical Specification Group Core Network and Terminals; AT command + set for User Equipment (UE)', 3GPP, December 2016, Section 8.69, + 'Extended signal quality +CESQ'" + ::= { tmnxCellularPortStatusEntry 10 } + +tmnxCellPortRsrq OBJECT-TYPE + SYNTAX Integer32 (-20..-3 | 0) + UNITS "decibel" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortRsrq indicates the reference signal received + quality, in decibel. + + A value of -20 indicates that the received signal quality is + -20 dB or less, while a value of -3 indicates that the + received signal quality is -3 dB or greater. + + A value of 0 indicates that the reference signal received quality has + not been measured." + REFERENCE + "3GPP TS 36.133 version 14.3.0 Release 14, '3rd Generation + Partnership Project; Technical Specification Group Radio + Access Network; Evolved Universal Terrestrial Radio Access + (E-UTRA); Requirements for support of radio resource management', + 3GPP, March 2017, Section 9.1.7 'RSRQ Measurement Report Mapping'" + ::= { tmnxCellularPortStatusEntry 11 } + +tmnxCellPortSinr OBJECT-TYPE + SYNTAX Integer32 (-200..400) + UNITS "0.1 decibel" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortSinr indicates the signal to interface and + noise ratio, in tenths of decibel. + + A value of -200 indicates that the signal to noise and interface + ratio is -20 dB or less, while a value of 400 indicates that the + signal to noise and interface ratio is 40 dB or greater." + ::= { tmnxCellularPortStatusEntry 12 } + +tmnxCellularSimCardStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellularSimCardStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularSimCardStatusTable has an entry for each SIM card in + the system." + ::= { tmnxCellularPortStatusObjs 3 } + +tmnxCellularSimCardStatusEntry OBJECT-TYPE + SYNTAX TmnxCellularSimCardStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a SIM card in the system. Entries + are automatically created by the system, and cannot be created or + deleted via SNMP SET operations." + AUGMENTS { tmnxCellularSimCardEntry } + ::= { tmnxCellularSimCardStatusTable 1 } + +TmnxCellularSimCardStatusEntry ::= SEQUENCE +{ + tmnxCellSimCardEquipped TruthValue, + tmnxCellSimCardIccid TmnxCellularSimCardIccid, + tmnxCellSimCardImsi TmnxCellularImsi, + tmnxCellSimCardLocked TruthValue, + tmnxCellSimCardPinStatus INTEGER, + tmnxCellSimCardPinRetries Unsigned32, + tmnxCellSimCardPukRetries Unsigned32, + tmnxCellSimCardFirmwareVersion DisplayString +} + +tmnxCellSimCardEquipped OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardEquipped indicates whether or not the SIM + card is installed in the system." + ::= { tmnxCellularSimCardStatusEntry 1 } + +tmnxCellSimCardIccid OBJECT-TYPE + SYNTAX TmnxCellularSimCardIccid + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardIccid indicates the International + Integrated Circuit Card Identifier assigned to this SIM card by the + manufacturer." + ::= { tmnxCellularSimCardStatusEntry 2 } + +tmnxCellSimCardImsi OBJECT-TYPE + SYNTAX TmnxCellularImsi + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardImsi indicates the International Mobile + Subscriber Identity (IMSI) assigned to the SIM card." + ::= { tmnxCellularSimCardStatusEntry 3 } + +tmnxCellSimCardLocked OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardLocked indicates whether the SIM card is + locked and requires a PIN." + ::= { tmnxCellularSimCardStatusEntry 4 } + +tmnxCellSimCardPinStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + waiting-for-pin (1), + waiting-for-puk (2), + ready (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardPinStatus indicates whether the SIM card + is waiting for a password, which could be either the PIN or the PIN + Unlock Key (PUK)." + REFERENCE + "3GPP TS 27.007 version 14.0.0 Release 14, '3rd Generation Partnership Project; + Technical Specification Group Core Network and Terminals; AT command + set for User Equipment (UE)', 3GPP, December 2016, Section 8.3, + 'Enter PIN +CPIN'" + ::= { tmnxCellularSimCardStatusEntry 5 } + +tmnxCellSimCardPinRetries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardPinRetries indicates the number of + remaining times the PIN can be attempted before the SIM card will be + locked and require a PIN Unlock Key (PUK) to unlock." + ::= { tmnxCellularSimCardStatusEntry 6 } + +tmnxCellSimCardPukRetries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardPukRetries indicates the number of + remaining times the PIN Unlock Key (PUK) can be attempted before the + SIM card is rendered inoperational." + ::= { tmnxCellularSimCardStatusEntry 7 } + +tmnxCellSimCardFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellSimCardFirmwareVersion indicates the firmware + version that the system will use on the cellular modem when this SIM + card is the active sim card. + + If the user has not specified a version of firmware to use with a SIM + card, tmnxCellSimCardFirmwareVersion has a value of an empty string." + ::= { tmnxCellularSimCardStatusEntry 8 } + +tmnxCellularPdnStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellularPdnStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularPdnStatusTable has an entry for each cellular Packet + Data Network in the system." + ::= { tmnxCellularPortStatusObjs 4 } + +tmnxCellularPdnStatusEntry OBJECT-TYPE + SYNTAX TmnxCellularPdnStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a cellular PDN in the system. Entries + are automatically created by the system, and cannot be created or + deleted via SNMP SET operations." + AUGMENTS { tmnxCellularPdnEntry } + ::= { tmnxCellularPdnStatusTable 1 } + +TmnxCellularPdnStatusEntry ::= SEQUENCE +{ + tmnxCellPdnConnectionState INTEGER, + tmnxCellPdnIpAddrType InetAddressType, + tmnxCellPdnIpAddress InetAddress, + tmnxCellPdnPrimaryDnsAddrType InetAddressType, + tmnxCellPdnPrimaryDnsAddress InetAddress, + tmnxCellPdnSecondaryDnsAddrType InetAddressType, + tmnxCellPdnSecondaryDnsAddress InetAddress, + tmnxCellPdnApn TmnxCellularAccessPointName, + tmnxCellPdnMtu Unsigned32 +} + +tmnxCellPdnConnectionState OBJECT-TYPE + SYNTAX INTEGER { + notConnected (0), + connected (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnConnectionState indicates whether or not the + packet data network connection has been successfully established." + ::= { tmnxCellularPdnStatusEntry 1 } + +tmnxCellPdnIpAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnIpAddrType indicates, along with + tmnxCellPdnIpAddress, the IP address assigned to the PDN by the + cellular network." + ::= { tmnxCellularPdnStatusEntry 2 } + +tmnxCellPdnIpAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE (0|4|16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnIpAddress indicates, along with + tmnxCellPdnIpAddrType, the IP address assigned to the PDN by the + cellular network." + ::= { tmnxCellularPdnStatusEntry 3 } + +tmnxCellPdnPrimaryDnsAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnPrimaryDnsAddrType indicates, along with + tmnxCellPdnPrimaryDnsAddress, the IP address assigned of the primary + DNS server in the PDN." + ::= { tmnxCellularPdnStatusEntry 4 } + +tmnxCellPdnPrimaryDnsAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE (0|4|16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnPrimaryDnsAddress indicates, along with + tmnxCellPdnPrimaryDnsAddrType, the IP address assigned of the primary + DNS server in the PDN." + ::= { tmnxCellularPdnStatusEntry 5 } + +tmnxCellPdnSecondaryDnsAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnSecondaryDnsAddrType indicates, along with + tmnxCellPdnSecondaryDnsAddress, the IP address assigned of the + secondary DNS server in the PDN." + ::= { tmnxCellularPdnStatusEntry 6 } + +tmnxCellPdnSecondaryDnsAddress OBJECT-TYPE + SYNTAX InetAddress (SIZE (0|4|16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnSecondaryDnsAddress indicates, along with + tmnxCellPdnSecondaryDnsAddrType, the IP address assigned of the + secondary DNS server in the PDN." + ::= { tmnxCellularPdnStatusEntry 7 } + +tmnxCellPdnApn OBJECT-TYPE + SYNTAX TmnxCellularAccessPointName + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnApn indicates the APN in use by the PDN." + ::= { tmnxCellularPdnStatusEntry 8 } + +tmnxCellPdnMtu OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPdnMtu indicates the operational value of the IP + MTU on this PDN." + ::= { tmnxCellularPdnStatusEntry 9 } + +tmnxCellularPortBearerTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellularPortBearerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularPortBearerTable has an entry for each bearer created + on a cellular port in the system." + ::= { tmnxCellularPortStatusObjs 5 } + +tmnxCellularPortBearerEntry OBJECT-TYPE + SYNTAX TmnxCellularPortBearerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a bearer created on a cellular port in the system. + Entries are automatically created and deleted by the system as the cellular + network creates and deletes bearers on the cellular port. Entries cannot be + created or deleted via SNMP SET operations." + INDEX { + tmnxPortPortID, + tmnxCellPortBearerId + } + ::= { tmnxCellularPortBearerTable 1 } + +TmnxCellularPortBearerEntry ::= SEQUENCE +{ + tmnxCellPortBearerId Unsigned32, + tmnxCellPortBearerType INTEGER, + tmnxCellPortBearerQci Unsigned32, + tmnxCellPortBearerUlGbr TmnxCellularBearerRate, + tmnxCellPortBearerUlMbr TmnxCellularBearerRate, + tmnxCellPortBearerDlGbr TmnxCellularBearerRate, + tmnxCellPortBearerDlMbr TmnxCellularBearerRate +} + +tmnxCellPortBearerId OBJECT-TYPE + SYNTAX Unsigned32 (1..15) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortBearerId indicates the Evolved Packet System + (EPS) Bearer Id of this bearer." + REFERENCE + "3GPP TS 23.401 version 11.11.0 Release 11, '3rd Generation Partnership Project; + Technical Specification Group Core Services and System Aspects; + General Packet Radio Service (GPRS) enhancements for Evolved Universal + Terrestrial Radio Access Network (E-UTRAN) access', 3GPP, December 2014, + Section 5.2.1, 'EPS bearer identity'" + ::= { tmnxCellularPortBearerEntry 1 } + +tmnxCellPortBearerType OBJECT-TYPE + SYNTAX INTEGER { + default (1), + dedicated (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortBearerType indicates the type of this bearer." + ::= { tmnxCellularPortBearerEntry 2 } + +tmnxCellPortBearerQci OBJECT-TYPE + SYNTAX Unsigned32 (1..254) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortBearerQci indicates the Quality of Service + (QoS) Class Identifier of this bearer." + REFERENCE + "3GPP TS 23.401 version 11.11.0 Release 11, '3rd Generation Partnership Project; + Technical Specification Group Core Services and System Aspects; + General Packet Radio Service (GPRS) enhancements for Evolved Universal + Terrestrial Radio Access Network (E-UTRAN) access', 3GPP, December 2014, + Section 4.7.3, 'Bearer level QoS parameters'" + ::= { tmnxCellularPortBearerEntry 3 } + +tmnxCellPortBearerUlGbr OBJECT-TYPE + SYNTAX TmnxCellularBearerRate + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortBearerUlGbr indicates the Guaranteed Bit Rate + of the uplink for this bearer. For a non-GBR bearer, + tmnxCellPortBearerUlGbr has a value of zero." + ::= { tmnxCellularPortBearerEntry 4 } + +tmnxCellPortBearerUlMbr OBJECT-TYPE + SYNTAX TmnxCellularBearerRate + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortBearerUlMbr indicates the Maximum Bit Rate + of the uplink for this bearer. For a non-GBR bearer, + tmnxCellPortBearerUlMbr has a value of zero." + ::= { tmnxCellularPortBearerEntry 5 } + +tmnxCellPortBearerDlGbr OBJECT-TYPE + SYNTAX TmnxCellularBearerRate + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortBearerDlGbr indicates the Guaranteed Bit Rate + of the downlink for this bearer. For a non-GBR bearer, + tmnxCellPortBearerDlGbr has a value of zero." + ::= { tmnxCellularPortBearerEntry 6 } + +tmnxCellPortBearerDlMbr OBJECT-TYPE + SYNTAX TmnxCellularBearerRate + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortBearerDlMbr indicates the Maximum Bit Rate + of the downlink for this bearer. For a non-GBR bearer, + tmnxCellPortBearerDlMbr has a value of zero." + ::= { tmnxCellularPortBearerEntry 7 } + +tmnxCellularPortTftTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellularPortTftEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellularPortTftTable contains information about the traffic + flow templates (TFTs) created on the cellular port." + ::= { tmnxCellularPortStatusObjs 6 } + +tmnxCellularPortTftEntry OBJECT-TYPE + SYNTAX TmnxCellularPortTftEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents a packet filter created on a specific bearer. + Entries are automatically created and deleted by the system as the cellular + network creates and deletes bearers on the cellular port. Entries cannot be + created or deleted via SNMP SET operations." + INDEX { + tmnxPortPortID, + tmnxCellPortBearerId, + tmnxCellPortTftPacketFilterId + } + ::= { tmnxCellularPortTftTable 1 } + +TmnxCellularPortTftEntry ::= SEQUENCE +{ + tmnxCellPortTftPacketFilterId Unsigned32, + tmnxCellPortTftEvalPrecedence Unsigned32, + tmnxCellPortTftDirection INTEGER, + tmnxCellPortTftTos Unsigned32, + tmnxCellPortTftTosMask Unsigned32 +} + +tmnxCellPortTftPacketFilterId OBJECT-TYPE + SYNTAX Unsigned32 (0..16) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortTftPacketFilterId identifies a packet filter + on a particular bearer." + REFERENCE + "3GPP TS 27.007 version 11.8.0 Release 11, '3rd Generation Partnership Project; + Technical Specification Group Core Network and Terminals; AT command + set for User Equipment (UE)', 3GPP, September 2013, Section 10.1.25, + 'Traffic flow template read dynamic parameters +CGTFTRDP' + + 3GPP TS 24.008 version 11.17.1 Release 11, '3rd Generation Partnership Project; + Technical Specification Group Core Network and Terminals; + Mobile radio interface Layer 3 specification; + Core network protocols; Stage 3', 3GPP, January 2018, + Section 10.5.6.12, 'Traffic Flow Template'" + ::= { tmnxCellularPortTftEntry 1 } + +tmnxCellPortTftEvalPrecedence OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortTftEvalPrecedence indicates the evaluation + precedence index of the packet filter." + REFERENCE + "3GPP TS 27.007 version 11.8.0 Release 11, '3rd Generation Partnership Project; + Technical Specification Group Core Network and Terminals; AT command + set for User Equipment (UE)', 3GPP, September 2013, Section 10.1.25, + 'Traffic flow template read dynamic parameters +CGTFTRDP' + + 3GPP TS 23.060 version 11.12.0 Release 11, '3rd Generation Partnership Project; + Technical Specification Group Services and System Aspects; General + Packet Radio Service (GPRS); Service description; Stage 2', 3GPP, December 2014, + Section 9.3, 'Packet Routeing and Transfer Function'" + ::= { tmnxCellularPortTftEntry 2 } + +tmnxCellPortTftDirection OBJECT-TYPE + SYNTAX INTEGER { + pre-release-7 (0), + uplink (1), + downlink (2), + bidirectional (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortTftDirection indicates the direction to apply + this packet filter." + REFERENCE + "3GPP TS 27.007 version 11.8.0 Release 11, '3rd Generation Partnership Project; + Technical Specification Group Core Network and Terminals; AT command + set for User Equipment (UE)', 3GPP, September 2013, Section 10.1.25, + 'Traffic flow template read dynamic parameters +CGTFTRDP'" + ::= { tmnxCellularPortTftEntry 3 } + +tmnxCellPortTftTos OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortTftTos indicates, along with + tmnxCellPortTftTosMask, the values of the IPv4 Type of Service (ToS) + that match this packet filter." + ::= { tmnxCellularPortTftEntry 4 } + +tmnxCellPortTftTosMask OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortTftTosMask indicates, along with + tmnxCellPortTftTos, the values of the IPv4 Type of Service (ToS) that + match this packet filter." + ::= { tmnxCellularPortTftEntry 5 } + +tmnxCellPortCbsdAuthStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF TmnxCellPortCbsdAuthStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The tmnxCellPortCbsdAuthStatsTable has an entry for each cellular port + in the system and pertains to CBSD authorization status and statistic + information." + ::= { tmnxCellularPortStatusObjs 7 } + +tmnxCellPortCbsdAuthStatsEntry OBJECT-TYPE + SYNTAX TmnxCellPortCbsdAuthStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row entry represents the CBSD authorization status and statistics + information for a cellular port in the system. Entries are + automatically created by the system, and cannot be created or deleted + via SNMP SET operations." + AUGMENTS { tmnxCellPortCbsdAuthCfgEntry } + ::= { tmnxCellPortCbsdAuthStatsTable 1 } + +TmnxCellPortCbsdAuthStatsEntry ::= SEQUENCE +{ + tmnxCellPortCbsdAuthOperState TmnxEnabledDisabled, + tmnxCellPortCbsdAuthId DisplayString, + tmnxCellPortCbsdAuthGrantId DisplayString, + tmnxCellPortCbsdAuthFccId DisplayString, + tmnxCellPortCbsdAuthRegState INTEGER, + tmnxCellPortCbsdAuthGrantState INTEGER, + tmnxCellPortCbsdAuthGrantExpTime DateAndTime, + tmnxCellPortCbsdAuthTxExpTime DateAndTime, + tmnxCellPortCbsdAuthHeartbeatInt Unsigned32, + tmnxCellPortCbsdAuthChanType INTEGER, + tmnxCellPortCbsdAuthCurSasSvr INTEGER, + tmnxCellPortCbsdAuthCurSasSvrIpT InetAddressType, + tmnxCellPortCbsdAuthCurSasSvrIp InetAddress, + tmnxCellPortCbsdAuthRegRequest Unsigned32, + tmnxCellPortCbsdAuthRegRspSuc Unsigned32, + tmnxCellPortCbsdAuthRegRspFail Unsigned32, + tmnxCellPortCbsdAuthGrantRequest Unsigned32, + tmnxCellPortCbsdAuthGrantRspSuc Unsigned32, + tmnxCellPortCbsdAuthGrantRspFail Unsigned32, + tmnxCellPortCbsdAuthHrtbtRequest Unsigned32, + tmnxCellPortCbsdAuthHrtbtRspSuc Unsigned32, + tmnxCellPortCbsdAuthHrtbtRspFail Unsigned32 +} + +tmnxCellPortCbsdAuthOperState OBJECT-TYPE + SYNTAX TmnxEnabledDisabled + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthOperState indicates the operational + state of the CBSD authorization for the cellular port." + ::= { tmnxCellPortCbsdAuthStatsEntry 1 } + +tmnxCellPortCbsdAuthId OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthId indicates the CBSD authorization + identifier." + ::= { tmnxCellPortCbsdAuthStatsEntry 2 } + +tmnxCellPortCbsdAuthGrantId OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthGrantId indicates the CBSD + authorization grant identifier." + ::= { tmnxCellPortCbsdAuthStatsEntry 3 } + +tmnxCellPortCbsdAuthFccId OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthFccId indicates the CBSD + authorization Federal Communications Commission identifier." + ::= { tmnxCellPortCbsdAuthStatsEntry 4 } + +tmnxCellPortCbsdAuthRegState OBJECT-TYPE + SYNTAX INTEGER { + unregistered (0), + registered (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthRegState indicates the CBSD + authorization registration state." + ::= { tmnxCellPortCbsdAuthStatsEntry 5 } + +tmnxCellPortCbsdAuthGrantState OBJECT-TYPE + SYNTAX INTEGER { + idle (1), + granted (2), + authorized (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthGrantState indicates the CBSD + authorization grant state." + ::= { tmnxCellPortCbsdAuthStatsEntry 6 } + +tmnxCellPortCbsdAuthGrantExpTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthGrantExpTime indicates the CBSD + authorization time the grant will expire." + ::= { tmnxCellPortCbsdAuthStatsEntry 7 } + +tmnxCellPortCbsdAuthTxExpTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthTxExpTime indicates the CBSD + authorization time the transmission will expire." + ::= { tmnxCellPortCbsdAuthStatsEntry 8 } + +tmnxCellPortCbsdAuthHeartbeatInt OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthHeartbeatInt indicates the CBSD + authorization heartbeat interval." + ::= { tmnxCellPortCbsdAuthStatsEntry 9 } + +tmnxCellPortCbsdAuthChanType OBJECT-TYPE + SYNTAX INTEGER { + gaa (1), + pal (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthChanType indicates the CBSD + authorization channel type." + ::= { tmnxCellPortCbsdAuthStatsEntry 10 } + +tmnxCellPortCbsdAuthCurSasSvr OBJECT-TYPE + SYNTAX INTEGER { + none (0), + primary (1), + secondary (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthCurSasSvr indicates the CBSD + authorization SAS server that is currently being used." + ::= { tmnxCellPortCbsdAuthStatsEntry 11 } + +tmnxCellPortCbsdAuthCurSasSvrIpT OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthCurSasSvrIpT indicates the IP address + type of the current SAS server being used in CBSD authorization ." + ::= { tmnxCellPortCbsdAuthStatsEntry 12 } + +tmnxCellPortCbsdAuthCurSasSvrIp OBJECT-TYPE + SYNTAX InetAddress (SIZE (0|4|16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthCurSasSvrIp indicates the IP address + of the current SAS server being used in CBSD authorization ." + ::= { tmnxCellPortCbsdAuthStatsEntry 13 } + +tmnxCellPortCbsdAuthRegRequest OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthRegRequest indicates the number of + CBSD authorization registration requests attempted." + ::= { tmnxCellPortCbsdAuthStatsEntry 14 } + +tmnxCellPortCbsdAuthRegRspSuc OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthRegRspSuc indicates the number of + successful CBSD authorization registration responses." + ::= { tmnxCellPortCbsdAuthStatsEntry 15 } + +tmnxCellPortCbsdAuthRegRspFail OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthRegRspFail indicates the number of + failed CBSD authorization registration responses." + ::= { tmnxCellPortCbsdAuthStatsEntry 16 } + +tmnxCellPortCbsdAuthGrantRequest OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthGrantRequest indicates the number of + CBSD authorization grant requests attempted." + ::= { tmnxCellPortCbsdAuthStatsEntry 17 } + +tmnxCellPortCbsdAuthGrantRspSuc OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthGrantRspSuc indicates the number of + successful CBSD authorization grant responses." + ::= { tmnxCellPortCbsdAuthStatsEntry 18 } + +tmnxCellPortCbsdAuthGrantRspFail OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthGrantRspFail indicates the number of + failed CBSD authorization grant responses." + ::= { tmnxCellPortCbsdAuthStatsEntry 19 } + +tmnxCellPortCbsdAuthHrtbtRequest OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthHrtbtRequest indicates the number of + CBSD authorization heartbeat requests." + ::= { tmnxCellPortCbsdAuthStatsEntry 20 } + +tmnxCellPortCbsdAuthHrtbtRspSuc OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthHrtbtRspSuc indicates the number of + successful CBSD authorization heartbeat responses." + ::= { tmnxCellPortCbsdAuthStatsEntry 21 } + +tmnxCellPortCbsdAuthHrtbtRspFail OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of tmnxCellPortCbsdAuthHrtbtRspFail indicates the number of + failed CBSD authorization heartbeat responses." + ::= { tmnxCellPortCbsdAuthStatsEntry 22 } + +tmnxCellularNotifyObjects OBJECT IDENTIFIER ::= { tmnxCellularObjs 4 } + +tmnxCellularNotifyPdnId OBJECT-TYPE + SYNTAX TmnxCellularPdnId + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The value of tmnxCellularNotifyPdnId indicates the PDN for the + notification." + ::= { tmnxCellularNotifyObjects 1 } + +tmnxCellMdaNoServiceResetReason OBJECT-TYPE + SYNTAX INTEGER { + cellular-port-down (1), + no-bgp-neighbor (2) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The value of tmnxCellMdaNoServiceResetReason indicates the specific + reason why the system reset due to failure to establish service over + the cellular interface." + ::= { tmnxCellularNotifyObjects 2 } + +tmnxCellCbsdAuthFailReason OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..100)) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The value of tmnxCellCbsdAuthFailReason indicates the specific reason + why CBSD authorization request failed." + ::= { tmnxCellularNotifyObjects 3 } + +tmnxCellCbsdAuthRespCode OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..100)) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The value of tmnxCellCbsdAuthRespCode indicates the CBSD authorization + response code." + ::= { tmnxCellularNotifyObjects 4 } + +tmnxCellCbsdAuthPrevTransState OBJECT-TYPE + SYNTAX INTEGER { + idle (1), + authorized (2), + granted (3) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The value of tmnxCellCbsdAuthPrevTransState indicates the previous + state when transitioning states during the CBSD authorization process." + ::= { tmnxCellularNotifyObjects 5 } + +tmnxCellCbsdAuthNewTransState OBJECT-TYPE + SYNTAX INTEGER { + idle (1), + authorized (2), + granted (3) + } + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The value of tmnxCellCbsdAuthNewTransState indicates the new state + when transitioning states during the CBSD authorization process." + ::= { tmnxCellularNotifyObjects 6 } + +tmnxCellularConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 109 } + +tmnxCellularCompliances OBJECT IDENTIFIER ::= { tmnxCellularConformance 1 } + +tmnxCellularCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the management of the cellular + feature-set for Release 15.0 on Nokia SROS series systems." + MODULE + MANDATORY-GROUPS { + tmnxCellularConfigGroup, + tmnxCellularStatusGroup + } + ::= { tmnxCellularCompliances 1 } + +tmnxCellularComplianceV16v0 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the management of the cellular + feature-set for Release 16.0 on Nokia SROS series systems." + MODULE + MANDATORY-GROUPS { + tmnxCellularV16v0ConfigGroup, + tmnxCellularV16v0StatusGroup, + tmnxCellNotificationV16v0Group + } + ::= { tmnxCellularCompliances 2 } + +tmnxCellularComplianceV19 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the management of the cellular + feature-set for Release 19 on Nokia SROS series systems." + MODULE + MANDATORY-GROUPS { + tmnxCellularV19ConfigGroup + } + ::= { tmnxCellularCompliances 3 } + +tmnxCellularComplianceV20 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the management of the cellular + feature-set for Release 20 on Nokia SROS series systems." + MODULE + MANDATORY-GROUPS { + tmnxCellularV20ConfigGroup + } + ::= { tmnxCellularCompliances 4 } + +tmnxCellularComplianceV21 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the management of the cellular + feature-set for Release 21 on Nokia SROS series systems." + MODULE + MANDATORY-GROUPS { + tmnxCellPortCbsdAuthGroupV21, + tmnxCellularNotifyObjsGroupV21, + tmnxCellNotificationGroupV21, + tmnxCellularStatusGroupV21, + tmnxCellularConfigGroupV21 + } + ::= { tmnxCellularCompliances 5 } + +tmnxCellularGroups OBJECT IDENTIFIER ::= { tmnxCellularConformance 2 } + +tmnxCellularV15v0Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 1 } + +tmnxCellularConfigGroup OBJECT-GROUP + OBJECTS { + tmnxCellPdnProfileTblLastChanged, + tmnxCellPdnProfRowStatus, + tmnxCellPdnProfLastChanged, + tmnxCellPdnProfDescription, + tmnxCellPdnProfApn, + tmnxCellPdnProfAuthType, + tmnxCellPdnProfUsername, + tmnxCellPdnProfPassword, + tmnxCellSimCardTableLastChanged, + tmnxCellSimCardLastChanged, + tmnxCellSimCardDescription, + tmnxCellSimCardPin, + tmnxCellPdnTblLastChanged, + tmnxCellPdnRowStatus, + tmnxCellPdnLastChanged, + tmnxCellPdnProfile, + tmnxCellPortTblLastChanged, + tmnxCellPortLastChanged, + tmnxCellPortBand125MaxPowerLevel + } + STATUS current + DESCRIPTION + "The group of objects maintaining cellular port configuration on Nokia + SROS series systems. This group was introduced in Release 15.0." + ::= { tmnxCellularV15v0Groups 1 } + +tmnxCellularStatusGroup OBJECT-GROUP + OBJECTS { + tmnxCellPortImei, + tmnxCellPortRegistrationStatus, + tmnxCellPortWirelessTechnology, + tmnxCellPortFrequencyBand, + tmnxCellPortChannelNumber, + tmnxCellPortAreaCode, + tmnxCellPortCellIdentity, + tmnxCellPortRssi, + tmnxCellPortRsrp, + tmnxCellPortRscp, + tmnxCellSimCardEquipped, + tmnxCellSimCardIccid, + tmnxCellSimCardImsi, + tmnxCellSimCardLocked, + tmnxCellSimCardPinStatus, + tmnxCellSimCardPinRetries, + tmnxCellSimCardPukRetries, + tmnxCellPdnConnectionState, + tmnxCellPdnIpAddrType, + tmnxCellPdnIpAddress, + tmnxCellPdnPrimaryDnsAddrType, + tmnxCellPdnPrimaryDnsAddress, + tmnxCellPdnSecondaryDnsAddrType, + tmnxCellPdnSecondaryDnsAddress, + tmnxCellPdnApn, + tmnxCellPdnMtu + } + STATUS current + DESCRIPTION + "The group of objects maintaining cellular port status on Nokia + SROS series systems. This group was introduced in Release 15.0." + ::= { tmnxCellularV15v0Groups 2 } + +tmnxCellularV16v0Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 2 } + +tmnxCellularV16v0ConfigGroup OBJECT-GROUP + OBJECTS { + tmnxCellMdaLastChanged, + tmnxCellMdaAdminActiveSim, + tmnxCellMdaDownResetInterval, + tmnxCellMdaDownResetCriteria, + tmnxCellMdaDownResetPending, + tmnxCellMdaDownResetTime, + tmnxCellSimCardFailureDuration, + tmnxCellSimCardPortStateSwitch, + tmnxCellSimCardBgpStateSwitch + } + STATUS current + DESCRIPTION + "The group of objects maintaining cellular port configuration on Nokia + SROS series systems, introduced in Release 16.0." + ::= { tmnxCellularV16v0Groups 1 } + +tmnxCellularV16v0StatusGroup OBJECT-GROUP + OBJECTS { + tmnxCellPortBearerId, + tmnxCellPortBearerType, + tmnxCellPortBearerQci, + tmnxCellPortBearerUlGbr, + tmnxCellPortBearerUlMbr, + tmnxCellPortBearerDlGbr, + tmnxCellPortBearerDlMbr, + tmnxCellPortTftPacketFilterId, + tmnxCellPortTftEvalPrecedence, + tmnxCellPortTftDirection, + tmnxCellPortTftTos, + tmnxCellPortTftTosMask, + tmnxCellSimCardFirmwareVersion, + tmnxCellMdaPreferredSim, + tmnxCellMdaOperActiveSim, + tmnxCellMdaSimCardSwitchPending, + tmnxCellMdaSimCardSwitchTime, + tmnxCellMdaSimCardLastSwitchTime, + tmnxCellMdaSimLastSwitchReason + } + STATUS current + DESCRIPTION + "The group of objects maintaining status of cellular ports on Nokia + SROS series systems, introduced in Release 16.0." + ::= { tmnxCellularV16v0Groups 2 } + +tmnxCellularNotifyObjsGroup OBJECT-GROUP + OBJECTS { + tmnxCellularNotifyPdnId, + tmnxCellMdaNoServiceResetReason + } + STATUS current + DESCRIPTION + "The group of objects used in notifications generated on cellular ports + on Nokia SROS series systems. This group was introduced in Release 16.0." + ::= { tmnxCellularV16v0Groups 3 } + +tmnxCellNotificationV16v0Group NOTIFICATION-GROUP + NOTIFICATIONS { + tmnxCellularBearerCreated, + tmnxCellularBearerDeleted, + tmnxCellularBearerModified, + tmnxCellularNoServiceReset, + tmnxCellularActiveSimChange + } + STATUS current + DESCRIPTION + "The group of notifications for cellular ports on Nokia SROS series + systems, introduced in Release 16.0." + ::= { tmnxCellularV16v0Groups 4 } + +tmnxCellularV19Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 3 } + +tmnxCellularV19ConfigGroup OBJECT-GROUP + OBJECTS { + tmnxCellPdnProfProtocol + } + STATUS current + DESCRIPTION + "The group of objects maintaining cellular port configuration on Nokia + SROS series systems, introduced in Release 19." + ::= { tmnxCellularV19Groups 1 } + +tmnxCellularV20Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 4 } + +tmnxCellularV20ConfigGroup OBJECT-GROUP + OBJECTS { + tmnxCellMdaSpecFirmwareVersion, + tmnxCellMdaMaxTxPower + } + STATUS current + DESCRIPTION + "The group of objects maintaining cellular port configuration and + status on Nokia SROS series systems, introduced in Release 20." + ::= { tmnxCellularV20Groups 1 } + +tmnxCellularV21Groups OBJECT IDENTIFIER ::= { tmnxCellularGroups 5 } + +tmnxCellPortCbsdAuthGroupV21 OBJECT-GROUP + OBJECTS { + tmnxCellPortCbsdAuthCfgTblLstChg, + tmnxCellPortCbsdAuthCfgLstChange, + tmnxCellPortCbsdAuthAdminState, + tmnxCellPortCbsdAuthUserId, + tmnxCellPortCbsdAuthAntennaGain, + tmnxCellPortCbsdAuthClntTlsProf, + tmnxCellPortCbsdAuthPriSasSvrUrl, + tmnxCellPortCbsdAuthSecSasSvrUrl, + tmnxCellPortCbsdAuthOperState, + tmnxCellPortCbsdAuthCategory, + tmnxCellPortCbsdAuthId, + tmnxCellPortCbsdAuthGrantId, + tmnxCellPortCbsdAuthFccId, + tmnxCellPortCbsdAuthRegState, + tmnxCellPortCbsdAuthGrantState, + tmnxCellPortCbsdAuthGrantExpTime, + tmnxCellPortCbsdAuthTxExpTime, + tmnxCellPortCbsdAuthHeartbeatInt, + tmnxCellPortCbsdAuthChanType, + tmnxCellPortCbsdAuthCurSasSvr, + tmnxCellPortCbsdAuthCurSasSvrIp, + tmnxCellPortCbsdAuthCurSasSvrIpT, + tmnxCellPortCbsdAuthRegRequest, + tmnxCellPortCbsdAuthRegRspSuc, + tmnxCellPortCbsdAuthRegRspFail, + tmnxCellPortCbsdAuthGrantRequest, + tmnxCellPortCbsdAuthGrantRspSuc, + tmnxCellPortCbsdAuthGrantRspFail, + tmnxCellPortCbsdAuthHrtbtRequest, + tmnxCellPortCbsdAuthHrtbtRspSuc, + tmnxCellPortCbsdAuthHrtbtRspFail + } + STATUS current + DESCRIPTION + "The group of objects maintaining cellular port CBSD authorization + capabilities on Nokia SROS series systems, introduced in release 21." + ::= { tmnxCellularV21Groups 1 } + +tmnxCellularNotifyObjsGroupV21 OBJECT-GROUP + OBJECTS { + tmnxCellCbsdAuthFailReason, + tmnxCellCbsdAuthRespCode, + tmnxCellCbsdAuthPrevTransState, + tmnxCellCbsdAuthNewTransState + } + STATUS current + DESCRIPTION + "The group of objects used in notifications generated on cellular ports + Nokia SROS series systems, introduced in release 21." + ::= { tmnxCellularV21Groups 2 } + +tmnxCellNotificationGroupV21 NOTIFICATION-GROUP + NOTIFICATIONS { + tmnxCellPortCbsdRegistered, + tmnxCellPortCbsdUnregistered, + tmnxCellPortCbsdGranted, + tmnxCellPortCbsdAuthorized, + tmnxCellPortCbsdTransDown + } + STATUS current + DESCRIPTION + "The group of notifications for cellular ports on Nokia SROS series + systems, introduced in release 21." + ::= { tmnxCellularV21Groups 3 } + +tmnxCellularStatusGroupV21 OBJECT-GROUP + OBJECTS { + tmnxCellPortRsrq, + tmnxCellPortSinr + } + STATUS current + DESCRIPTION + "The group of objects maintaining cellular port status on Nokia SROS + series systems, introduced in release 21." + ::= { tmnxCellularV21Groups 4 } + +tmnxCellularConfigGroupV21 OBJECT-GROUP + OBJECTS { + tmnxCellPortSyncSysTime + } + STATUS current + DESCRIPTION + "The group of objects maintaining cellular port configuration on Nokia + SROS series systems, introduced in release 21." + ::= { tmnxCellularV21Groups 5 } + +tmnxCellularNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 109 } + +tmnxCellularNotifications OBJECT IDENTIFIER ::= { tmnxCellularNotifyPrefix 0 } + +tmnxCellularBearerCreated NOTIFICATION-TYPE + OBJECTS { + tmnxCellularNotifyPdnId, + tmnxCellPortBearerId + } + STATUS current + DESCRIPTION + "The tmnxCellularBearerCreated notification is generated when the + network creates a dedicated bearer on a cellular port." + ::= { tmnxCellularNotifications 1 } + +tmnxCellularBearerDeleted NOTIFICATION-TYPE + OBJECTS { + tmnxCellularNotifyPdnId, + tmnxCellPortBearerId + } + STATUS current + DESCRIPTION + "The tmnxCellularBearerDeleted notification is generated when the + network removes a dedicated bearer on a cellular port." + ::= { tmnxCellularNotifications 2 } + +tmnxCellularBearerModified NOTIFICATION-TYPE + OBJECTS { + tmnxCellularNotifyPdnId, + tmnxCellPortBearerId + } + STATUS current + DESCRIPTION + "The tmnxCellularBearerModified notification is generated when the + network modifies a bearer on a cellular port." + ::= { tmnxCellularNotifications 3 } + +tmnxCellularNoServiceReset NOTIFICATION-TYPE + OBJECTS { + tmnxPortNotifyPortId, + tmnxCellMdaNoServiceResetReason + } + STATUS current + DESCRIPTION + "The tmnxCellularNoServiceReset notification is generated before the + system resets because it could not establish service over the cellular + interface." + ::= { tmnxCellularNotifications 4 } + +tmnxCellularActiveSimChange NOTIFICATION-TYPE + OBJECTS { + tmnxCellMdaAdminActiveSim, + tmnxCellMdaOperActiveSim, + tmnxCellMdaSimLastSwitchReason + } + STATUS current + DESCRIPTION + "The tmnxCellularActiveSimChange notification is generated when the + active SIM card on the cellular MDA changes." + ::= { tmnxCellularNotifications 5 } + +tmnxCellPortCbsdRegistered NOTIFICATION-TYPE + OBJECTS { + tmnxCellPortCbsdAuthId, + tmnxCellPortCbsdAuthCurSasSvrIp, + tmnxCellPortCbsdAuthCurSasSvrIpT + } + STATUS current + DESCRIPTION + "[CAUSE] The tmnxCellPortCbsdRegistered notification is generated when + the CBSD successfully registers with the SAS. + + [EFFECT] After this notification is generated the CBSD continues the + CBSD authorization procedures. + + [RECOVERY] Not applicable." + ::= { tmnxCellularNotifications 6 } + +tmnxCellPortCbsdUnregistered NOTIFICATION-TYPE + OBJECTS { + tmnxCellPortCbsdAuthId, + tmnxCellCbsdAuthFailReason, + tmnxCellCbsdAuthRespCode + } + STATUS current + DESCRIPTION + "[CAUSE] The tmnxCellPortCbsdUnregistered notification is generated + when the CBSD is declared unregistered with the SAS. + + [EFFECT] The CBSD restarts the registration procedures with the SAS. + + [RECOVERY] Not applicable." + ::= { tmnxCellularNotifications 7 } + +tmnxCellPortCbsdGranted NOTIFICATION-TYPE + OBJECTS { + tmnxCellPortCbsdAuthId, + tmnxCellPortCbsdAuthGrantId, + tmnxCellPortCbsdAuthGrantExpTime, + tmnxCellPortCbsdAuthHeartbeatInt + } + STATUS current + DESCRIPTION + "[CAUSE] The tmnxCellPortCbsdGranted notification is generated when the + CBSD has received a grant Id from the SAS. The CBSD is not authorized + until after the authorized notification is generated. + + [EFFECT] The CBSD is awaiting authorization from the SAS. + + [RECOVERY] Not applicable." + ::= { tmnxCellularNotifications 8 } + +tmnxCellPortCbsdAuthorized NOTIFICATION-TYPE + OBJECTS { + tmnxCellPortCbsdAuthId, + tmnxCellPortCbsdAuthGrantId, + tmnxCellPortCbsdAuthGrantExpTime, + tmnxCellPortCbsdAuthHeartbeatInt + } + STATUS current + DESCRIPTION + "[CAUSE] The tmnxCellPortCbsdAuthorized notification is generated when + the CBSD is authorized by the SAS. + + [EFFECT] The CBSD enables SR-OS on the cellular interface. + + [RECOVERY] Not applicable." + ::= { tmnxCellularNotifications 9 } + +tmnxCellPortCbsdTransDown NOTIFICATION-TYPE + OBJECTS { + tmnxCellPortCbsdAuthId, + tmnxCellPortCbsdAuthGrantId, + tmnxCellCbsdAuthPrevTransState, + tmnxCellCbsdAuthNewTransState, + tmnxCellCbsdAuthFailReason, + tmnxCellCbsdAuthRespCode + } + STATUS current + DESCRIPTION + "[CAUSE] The tmnxCellPortCbsdTransDown notification is generated when + the CBSD is transitioning to a lower state. + + [EFFECT] The CBSD proceeds to complete authorization with the SAS from + the state the CBSD has transitioned to. + + [RECOVERY] Not applicable." + ::= { tmnxCellularNotifications 10 } + +END |