summaryrefslogtreecommitdiff
path: root/MIBS/nokia/ALCATEL-IND1-BFD-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/nokia/ALCATEL-IND1-BFD-MIB')
-rw-r--r--MIBS/nokia/ALCATEL-IND1-BFD-MIB909
1 files changed, 909 insertions, 0 deletions
diff --git a/MIBS/nokia/ALCATEL-IND1-BFD-MIB b/MIBS/nokia/ALCATEL-IND1-BFD-MIB
new file mode 100644
index 0000000..c8331c5
--- /dev/null
+++ b/MIBS/nokia/ALCATEL-IND1-BFD-MIB
@@ -0,0 +1,909 @@
+-- BFD MIB
+
+
+ALCATEL-IND1-BFD-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+
+ MODULE-IDENTITY, OBJECT-TYPE,
+ Unsigned32, Counter64,TimeTicks,
+ OBJECT-IDENTITY
+ FROM SNMPv2-SMI -- [RFC2578]
+
+ MODULE-COMPLIANCE,OBJECT-GROUP
+ FROM SNMPv2-CONF
+
+ TEXTUAL-CONVENTION, TruthValue,
+ RowStatus
+ FROM SNMPv2-TC -- [RFC2579]
+
+ InterfaceIndex, InterfaceIndexOrZero
+ FROM IF-MIB -- [RFC2863]
+
+ InetAddress, InetAddressType, InetPortNumber
+ FROM INET-ADDRESS-MIB -- [RFC4001]
+
+
+ softentIND1BFD
+ FROM ALCATEL-IND1-BASE;
+
+
+
+
+ alcatelIND1BfdMIB MODULE-IDENTITY
+ LAST-UPDATED "200805030000Z"
+ ORGANIZATION "Alcatel-Lucent"
+ CONTACT-INFO
+ "Please consult with Customer Service to ensure the most appropriate
+ version of this document is used with the products in question:
+
+ Alcatel-Lucent, Enterprise Solutions Division
+ (Formerly Alcatel Internetworking, Incorporated)
+ 26801 West Agoura Road
+ Agoura Hills, CA 91301-5122
+ United States Of America
+
+ Telephone: North America +1 800 995 2696
+ Latin America +1 877 919 9526
+ Europe +31 23 556 0100
+ Asia +65 394 7933
+ All Other +1 818 878 4507
+
+ Electronic Mail: support@ind.alcatel.com
+ World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
+ File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
+
+ DESCRIPTION
+ "This module describes an authoritative enterprise-specific Simple
+ Network Management Protocol (SNMP) Management Information Base (MIB):
+
+ For the Birds Of Prey Product Line
+ Configuration of Bidirectional Forwarding detection(BFD) protocol parameters.
+ The right to make changes in specification and other information
+ contained in this document without prior notice is reserved.
+
+ No liability shall be assumed for any incidental, indirect, special, or
+ consequential damages whatsoever arising from or related to this
+ document or the information contained herein.
+
+ Vendors, end-users, and other interested parties are granted
+ non-exclusive license to use this specification in connection with
+ management of the products for which it is intended to be used.
+
+ Copyright (C) 1995-2007 Alcatel-Lucent
+ ALL RIGHTS RESERVED WORLDWIDE"
+
+ REVISION "200805030000Z"
+ DESCRIPTION
+ "The latest version of this MIB Module."
+ ::= { softentIND1BFD 1}
+
+
+ alaBfdObjects OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Branch for Bi-Directional forwarding detection
+ Subsystem managed objects"
+ ::= { alcatelIND1BfdMIB 1 }
+
+ alcatelIND1BfdMIBConformance OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Conformance"
+ ::= { alcatelIND1BfdMIB 2 }
+
+
+ -- Textual Conventions
+ AlaBfdInterval ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The BFD interval delay in milliseconds."
+ SYNTAX Unsigned32 (1..65535)
+
+ AlaBfdDiag ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A common BFD diagnostic code."
+ SYNTAX INTEGER { noDiagnostic(1),
+ controlDetectionTimeExpired(2),
+ echoFunctionFailed(3),
+ neighborSignaledSessionDown(4),
+ forwardingPlaneReset(5),
+ pathDown(6),
+ concatenatedPathDown(7),
+ administrativelyDown(8),
+ reverseConcatenatedPathDown (9)
+ }
+
+ AlaBfdStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ " Admin status"
+ SYNTAX INTEGER { enabled(1),
+ disabled(2)
+ }
+
+
+
+
+ -- BFD General Variables
+ alaBfdGlobalObjects OBJECT IDENTIFIER ::= { alaBfdObjects 1 }
+
+ alaBfdGlobalAdminStatus OBJECT-TYPE
+ SYNTAX AlaBfdStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The global administrative status of BFD in this
+ router."
+ DEFVAL { enabled }
+ ::= { alaBfdGlobalObjects 1 }
+
+ alaBfdGlobalTxInterval OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The object specifies the Desired Tx interval at which
+ BFD packets should be transmitted at global level."
+ DEFVAL { 300 }
+ ::= { alaBfdGlobalObjects 2 }
+
+ alaBfdGlobalRxInterval OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The object specifies the Min Rx interval at which BFD
+ packets should be transmitted at global level."
+ DEFVAL { 300 }
+ ::= { alaBfdGlobalObjects 3 }
+
+
+ alaBfdGlobalOperMode OBJECT-TYPE
+ SYNTAX INTEGER { asyncMode(1),
+ demandMode(2),
+ echoOnly(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The object specifies the operation mode at global
+ level"
+ DEFVAL { asyncMode }
+ ::= { alaBfdGlobalObjects 4 }
+
+ alaBfdGlobalVersionNumber OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The version number of the BFD protocol that this
+ session is running in."
+ DEFVAL{1}
+ ::= { alaBfdGlobalObjects 5 }
+
+ alaBfdGlobalL2HoldTimer OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The object specifies the L2 convergence timer
+ value at global level."
+ DEFVAL { 500 }
+ ::= { alaBfdGlobalObjects 6}
+
+ alaBfdGlobalProtocols OBJECT-TYPE
+ SYNTAX BITS { ospf(0),
+ bgp(1),
+ dvmrp(2),
+ vrrp(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "BFD Protocol status: Bits 0 - 3
+ bit 0 - OSPF enabled/disabled
+ bit 1 - BGP enabled/disabled
+ bit 2 - DVMRP enabled/disabled
+ bit 3 - VRRP enabled/disabled "
+ ::= { alaBfdGlobalObjects 7}
+
+
+
+ alaBfdGlobalEchoObjects OBJECT IDENTIFIER ::= { alaBfdObjects 2 }
+
+ alaBfdGlobalEcho OBJECT-TYPE
+ SYNTAX AlaBfdStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The object specifies status of echo mode at global
+ level."
+ ::= { alaBfdGlobalEchoObjects 1 }
+
+ alaBfdGlobalEchoRxInterval OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The object specifies the Echo Rx interval at which BFD
+ packets should be transmitted at global level."
+ DEFVAL { 300 }
+ ::= { alaBfdGlobalEchoObjects 2 }
+
+
+-- BFD interface Table
+-- BFD interface Table specifies the configuration done over the interface
+
+ alaBfdIntfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaBfdIntfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The BFD Interface Table describes confiuration done over the
+ BFD interfaces."
+ ::= { alaBfdObjects 3 }
+
+ alaBfdIntfEntry OBJECT-TYPE
+ SYNTAX AlaBfdIntfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The BFD interface Entry describes BFD interface."
+ INDEX { alaBfdIntfAddrType, alaBfdIntfAddr}
+ ::= { alaBfdIntfTable 1 }
+
+ AlaBfdIntfEntry ::= SEQUENCE {
+ alaBfdIntfAddrType InetAddressType,
+ alaBfdIntfAddr InetAddress,
+ alaBfdIntfIndex InterfaceIndex,
+ alabfdIntfAdminStatus AlaBfdStatus,
+ alaBfdIntfDesiredMinTxInterval AlaBfdInterval,
+ alaBfdIntfReqMinRxInterval AlaBfdInterval,
+ alaBfdIntfEchoMode AlaBfdStatus,
+ alaBfdIntfReqMinEchoRxInterval AlaBfdInterval,
+ alaBfdIntfDetectMult Unsigned32,
+ alaBfdIntfOperMode INTEGER,
+ alaBfdIntfsesstype INTEGER,
+ alaBfdIntfAuthPresFlag TruthValue,
+ alaBfdIntfAuthenticationType INTEGER,
+ alaBfdIntfL2HoldTimer AlaBfdInterval,
+ alaBfdIntfRowStatus RowStatus
+ }
+
+
+ alaBfdIntfAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object specifies IP address type values
+ unknown(0), ipv4(1) or ipv6(2) have to be
+ supported."
+ ::= { alaBfdIntfEntry 1}
+
+ alaBfdIntfAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The address of the BFD interface configured"
+ ::= { alaBfdIntfEntry 2}
+
+ alaBfdIntfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Interface Index of the BFD interface"
+ ::= { alaBfdIntfEntry 3}
+
+
+ alabfdIntfAdminStatus OBJECT-TYPE
+ SYNTAX AlaBfdStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object specifies the adminstatus of the
+ BFD interface."
+ DEFVAL { 2 }
+ ::= { alaBfdIntfEntry 4}
+
+ alaBfdIntfDesiredMinTxInterval OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object specifies the Desired Tx interval at
+ which BFD packets should be transmitted at
+ interface level. Default interval is global
+ configured interval"
+ ::= { alaBfdIntfEntry 5}
+
+
+ alaBfdIntfReqMinRxInterval OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object specifies the Min Rx interval at
+ which BFD packets should be transmitted at
+ interface level.Default interval is global
+ configured interval"
+ ::= { alaBfdIntfEntry 6}
+
+ alaBfdIntfOperMode OBJECT-TYPE
+ SYNTAX INTEGER { asyncMode(1),
+ demandMode(2),
+ echoOnly(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object specifies the operation mode at
+ interface level. Default mode is global mode"
+ ::= { alaBfdIntfEntry 7}
+
+ alaBfdIntfEchoMode OBJECT-TYPE
+ SYNTAX AlaBfdStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object specifies status of echo mode at
+ interface level."
+ ::= { alaBfdIntfEntry 8}
+
+ alaBfdIntfReqMinEchoRxInterval OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object specifies the Echo Rx interval at
+ which BFD packets should be transmitted at
+ interface level. Default interval is global
+ configured interval"
+ ::= { alaBfdIntfEntry 9}
+
+ alaBfdIntfDetectMult OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object specifies the Detect multiplier at
+ interface level."
+ DEFVAL { 3 }
+ ::= { alaBfdIntfEntry 10}
+
+
+
+ alaBfdIntfsesstype OBJECT-TYPE
+ SYNTAX INTEGER { singleHop(1),
+ multiHop(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of this BFD session corresponding to
+ this interface. Currently single hop supported"
+ DEFVAL { singleHop }
+ ::= { alaBfdIntfEntry 11}
+
+ alaBfdIntfAuthPresFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the local system's
+ desire to use Authentication. Specifically, it
+ is set to true(1) if the local system wishes the
+ session to be authenticated or false(0) if not"
+ DEFVAL { false }
+ ::= { alaBfdIntfEntry 12}
+
+ alaBfdIntfAuthenticationType OBJECT-TYPE
+ SYNTAX INTEGER { none (1),
+ simplePassword(2),
+ keyedMD5(3),
+ meticulousKeyedMD5(4),
+ keyedSHA1(5),
+ meticulousKeyedSHA1(6)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The Authentication Type used for this BFD
+ session. This field is valid only when the
+ Authentication Present bit is set"
+ DEFVAL { 1 }
+ ::= { alaBfdIntfEntry 13}
+
+ alaBfdIntfL2HoldTimer OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object configures layer 2 convergence
+ timer"
+ ::= { alaBfdIntfEntry 14}
+
+ alaBfdIntfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable is used to create, modify, and/or
+ delete a row in this table."
+ ::= { alaBfdIntfEntry 15}
+
+
+ -- BFD Session Table
+ -- The BFD Session Table specifies BFD session specific
+ -- information.
+
+
+ alaBfdSessTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaBfdSessEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The BFD Session Table describes the BFD sessions."
+ ::= { alaBfdObjects 4 }
+
+ alaBfdSessEntry OBJECT-TYPE
+ SYNTAX AlaBfdSessEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The BFD Session Entry describes BFD session."
+ INDEX { alaBfdSessDiscriminator}
+ ::= { alaBfdSessTable 1 }
+
+ AlaBfdSessEntry ::= SEQUENCE {
+ alaBfdSessDiscriminator Unsigned32,
+ alaBfdSessNeighborAddrType InetAddressType,
+ alaBfdSessNeighborAddr InetAddress,
+ alaBfdSessRemoteDiscr Unsigned32,
+ alaBfdSessUdpPort InetPortNumber,
+ alaBfdSessState INTEGER,
+ alaBfdSessRemoteHeardFlag TruthValue,
+ alaBfdSessDiag AlaBfdDiag,
+ alaBfdSessOperMode INTEGER,
+ alaBfdSessEchoFuncModeDesiredFlag TruthValue,
+ alaBfdSessControlPlanIndepFlag TruthValue,
+ alaBfdSessInterface InterfaceIndexOrZero,
+ alaBfdSessNegotiatedTxInterval AlaBfdInterval,
+ alaBfdSessNegotiatedRxInterval AlaBfdInterval,
+ alaBfdSessProtocols BITS
+ }
+
+
+ alaBfdSessDiscriminator OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object specifies the local discriminator
+ for this BFD session, used to uniquely identify it."
+ ::= { alaBfdSessEntry 1}
+
+ alaBfdSessNeighborAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies IP address type values
+ unknown(0), ipv4(1) or ipv6(2) have to be
+ supported."
+ ::= { alaBfdSessEntry 2}
+
+ alaBfdSessNeighborAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies the neighbor IpAddress."
+ ::= { alaBfdSessEntry 3}
+
+
+ alaBfdSessRemoteDiscr OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4294967295)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies the local discriminator
+ for this BFD session, used to uniquely identify
+ it."
+ ::= { alaBfdSessEntry 4}
+
+ alaBfdSessUdpPort OBJECT-TYPE
+ SYNTAX InetPortNumber
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The destination UDP Port for BFD. The default
+ value is the well-known value for this port."
+ ::= { alaBfdSessEntry 5}
+
+
+ alaBfdSessState OBJECT-TYPE
+ SYNTAX INTEGER {
+ adminDown(1),
+ down(2),
+ init(3),
+ up(4),
+ failing(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The perceived state of the BFD session.BFD
+ State failing(5) is only applicable if this BFD
+ session is running version 0."
+ ::= { alaBfdSessEntry 6}
+
+ alaBfdSessRemoteHeardFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies status of BFD packet
+ reception from the remote system. Specifically,
+ it is set to true(1) if the local system is
+ actively receiving BFD packets from the remote
+ system, and is set to false(0) if the local
+ system has not received BFD packets recently
+ (within the detection time) or if the local
+ system is attempting to tear down the BFD
+ session. Value placed in this object is valid
+ only if this session is running in BFD
+ version 0."
+ ::= { alaBfdSessEntry 7}
+
+ alaBfdSessDiag OBJECT-TYPE
+ SYNTAX AlaBfdDiag
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A diagnostic code specifying the local system's
+ reason for the last transition of the session
+ from up(4)to some other state."
+ ::= { alaBfdSessEntry 8}
+
+ alaBfdSessOperMode OBJECT-TYPE
+ SYNTAX INTEGER { asyncMode(1),
+ demandMode(2),
+ echoOnly(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies current operating mode
+ that BFD session is operating in.
+ A value of AsyncMode(1) ...
+ A value of DemandMode(2) ..."
+ ::= { alaBfdSessEntry 9}
+
+
+ alaBfdSessEchoFuncModeDesiredFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the local system's
+ desire to use Echo mode. Specifically, it is set
+ to true(1) if the local system wishes to use
+ Echo mode or false(0) if not"
+ ::= { alaBfdSessEntry 10}
+
+ alaBfdSessControlPlanIndepFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the local system's
+ ability to continue to function through a
+ disruption of the control plane. Specifically,
+ it is set to true(1) if the local system BFD
+ implementation independent of the control plane.
+ Otherwise, the value is set to false(0)"
+ DEFVAL {1}
+ ::= { alaBfdSessEntry 11}
+
+ alaBfdSessInterface OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object contains an interface index used
+ to indicate the interface which this BFD
+ session is running on. This value can be zero
+ if there are no interface associated
+ with this BFD session"
+ ::= { alaBfdSessEntry 12}
+
+ alaBfdSessNegotiatedTxInterval OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies the minimum interval, in
+ milliseconds, that the local system will
+ transmit BFD Control packets."
+ ::= { alaBfdSessEntry 13}
+
+ alaBfdSessNegotiatedRxInterval OBJECT-TYPE
+ SYNTAX AlaBfdInterval
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies the minimum interval, in
+ milliseconds, that the local system will
+ Receive BFD Control packets."
+ ::= { alaBfdSessEntry 14}
+
+ alaBfdSessProtocols OBJECT-TYPE
+ SYNTAX BITS { ospf(0),
+ bgp(1),
+ dvmrp(2),
+ vrrp(3),
+ iprm(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "BFD Protocol status: Bits 0 - 3
+ bit 0 - OSPF enabled/disabled
+ bit 1 - BGP enabled/disabled
+ bit 2 - DVMRP enabled/disabled
+ bit 3 - VRRP enabled/disabled
+ bit 4 - IPRM enabled/disabled"
+ ::= { alaBfdSessEntry 15}
+
+
+
+ -- BFD Session Performance Table
+
+
+ alaBfdSessPerfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlaBfdSessPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table specifies BFD Session performance counters."
+ ::= { alaBfdObjects 5 }
+
+ alaBfdSessPerfEntry OBJECT-TYPE
+ SYNTAX AlaBfdSessPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table is created by a BFD-enabled node
+ for every BFD Session. bfdCounterDiscontinuityTime is
+ used to indicate potential discontinuity for all counter
+ objects in this table."
+ AUGMENTS { alaBfdSessEntry }
+ ::= { alaBfdSessPerfTable 1 }
+
+ AlaBfdSessPerfEntry ::= SEQUENCE {
+ alaBfdSessPerfPktIn Counter64,
+ alaBfdSessPerfPktOut Counter64,
+ alaBfdSessPerfEchoOut Counter64,
+ alaBfdSessPerfUpTime TimeTicks,
+ alaBfdSessPerfLastSessDownTime TimeTicks,
+ alaBfdSessPerfLastCommLostDiag AlaBfdDiag,
+ alaBfdSessPerfSessUpCount Counter64,
+ alaBfdSessPerfDiscTime TimeTicks
+ }
+
+
+ alaBfdSessPerfPktIn OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of BFD messages received for this BFD
+ session."
+ ::= { alaBfdSessPerfEntry 1 }
+
+ alaBfdSessPerfPktOut OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of BFD messages sent for this BFD
+ session."
+ ::= { alaBfdSessPerfEntry 2 }
+
+ alaBfdSessPerfEchoOut OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of BFD Echo messages sent for this BFD
+ session."
+ ::= { alaBfdSessPerfEntry 3 }
+
+
+ alaBfdSessPerfUpTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime on the most recent occasion at
+ which the session came up. If no such up event exists
+ this object contains a zero value."
+ ::= { alaBfdSessPerfEntry 4 }
+
+ alaBfdSessPerfLastSessDownTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime on the most recent occasion at
+ which the last time communication was lost with the
+ neighbor. If no such down event exist this object
+ contains a zero value."
+ ::= { alaBfdSessPerfEntry 5 }
+
+ alaBfdSessPerfLastCommLostDiag OBJECT-TYPE
+ SYNTAX AlaBfdDiag
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The BFD diag code for the last time communication was
+ lost with the neighbor. If no such down event exists
+ this object contains a zero value."
+ ::= { alaBfdSessPerfEntry 6 }
+
+ alaBfdSessPerfSessUpCount OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this session has gone into the Up
+ state since the router last rebooted."
+ ::= { alaBfdSessPerfEntry 7 }
+
+ alaBfdSessPerfDiscTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime on the most recent occasion at
+ which any one or more of the session counters suffered
+ a discontinuity.The relevant counters are the specific
+ instances associated with this BFD session of any
+ Counter64 object contained in the BfdSessPerfTable.
+ If no such discontinuities have occurred since the last
+ re-initialization of the local management subsystem,
+ then this object contains a zero value."
+ ::= { alaBfdSessPerfEntry 8 }
+
+
+ -- BFD Conformance
+
+ alcatelIND1BfdMIBGroups OBJECT IDENTIFIER ::=
+ { alcatelIND1BfdMIBConformance 1}
+
+ alcatelIND1BfdMIBCompliances OBJECT IDENTIFIER ::=
+ { alcatelIND1BfdMIBConformance 2}
+
+
+ -- compliance statements
+ alcatelIND1BfdMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for device support of BFD."
+ MODULE
+ MANDATORY-GROUPS {
+ alaBfdbasicGroup,
+ alaBfdIntfCfgGroup,
+ alaBfdSessGroup,
+ alaBfdSessPerfGroup
+ }
+ ::= { alcatelIND1BfdMIBCompliances 1}
+ -- units of conformance
+ alaBfdbasicGroup OBJECT-GROUP
+ OBJECTS {
+ alaBfdGlobalAdminStatus,
+ alaBfdGlobalTxInterval,
+ alaBfdGlobalRxInterval,
+ alaBfdGlobalOperMode,
+ alaBfdGlobalVersionNumber,
+ alaBfdGlobalL2HoldTimer,
+ alaBfdGlobalProtocols,
+ alaBfdGlobalEcho,
+ alaBfdGlobalEchoRxInterval
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information about the
+ configuration done for BFD at global level."
+ ::= { alcatelIND1BfdMIBGroups 1}
+
+ alaBfdIntfCfgGroup OBJECT-GROUP
+ OBJECTS {
+ alaBfdIntfIndex,
+ alabfdIntfAdminStatus,
+ alaBfdIntfDesiredMinTxInterval,
+ alaBfdIntfReqMinRxInterval,
+ alaBfdIntfEchoMode,
+ alaBfdIntfReqMinEchoRxInterval,
+ alaBfdIntfDetectMult,
+ alaBfdIntfOperMode,
+ alaBfdIntfsesstype,
+ alaBfdIntfAuthPresFlag,
+ alaBfdIntfAuthenticationType,
+ alaBfdIntfL2HoldTimer
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information about the
+ configuration done for a BFD interface."
+ ::= { alcatelIND1BfdMIBGroups 2}
+
+ alaBfdSessGroup OBJECT-GROUP
+ OBJECTS {
+ alaBfdSessNeighborAddrType,
+ alaBfdSessNeighborAddr,
+ alaBfdSessRemoteDiscr,
+ alaBfdSessUdpPort,
+ alaBfdSessState,
+ alaBfdSessRemoteHeardFlag,
+ alaBfdSessDiag,
+ alaBfdSessOperMode,
+ alaBfdSessEchoFuncModeDesiredFlag,
+ alaBfdSessControlPlanIndepFlag,
+ alaBfdSessInterface,
+ alaBfdSessNegotiatedTxInterval,
+ alaBfdSessNegotiatedRxInterval,
+ alaBfdSessProtocols
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information about the
+ BFD session."
+ ::= { alcatelIND1BfdMIBGroups 3}
+
+ alaBfdSessPerfGroup OBJECT-GROUP
+ OBJECTS {
+ alaBfdSessPerfPktIn,
+ alaBfdSessPerfPktOut,
+ alaBfdSessPerfEchoOut,
+ alaBfdSessPerfUpTime,
+ alaBfdSessPerfLastSessDownTime,
+ alaBfdSessPerfLastCommLostDiag,
+ alaBfdSessPerfSessUpCount,
+ alaBfdSessPerfDiscTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information about the
+ BFD session performance counters."
+ ::= { alcatelIND1BfdMIBGroups 4}
+
+ END
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 10:19:26 +0000