diff options
Diffstat (limited to 'MIBS/montclair')
| -rw-r--r-- | MIBS/montclair/Montclair-MIB | 949 |
1 files changed, 949 insertions, 0 deletions
diff --git a/MIBS/montclair/Montclair-MIB b/MIBS/montclair/Montclair-MIB new file mode 100644 index 0000000..969e8d5 --- /dev/null +++ b/MIBS/montclair/Montclair-MIB @@ -0,0 +1,949 @@ +Montclair-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE,
+ IpAddress, Integer32, Gauge32, enterprises
+ FROM SNMPv2-SMI
+ DisplayString
+ FROM SNMPv2-TC
+ OBJECT-GROUP
+ FROM SNMPv2-CONF;
+
+Montclair MODULE-IDENTITY
+ LAST-UPDATED "201704190000Z"
+ ORGANIZATION "Montclair"
+ CONTACT-INFO
+ "Montclair Fiber Optics, Inc.
+ Web: Montclair Fiber Optics, Inc
+ E-mail: info@montclairfiber.com
+ 8705 Montclair Drive, Suite 140
+ Middleton, WI 53562"
+
+ DESCRIPTION "'Number' changed to 'Amount', 'Fans' changed to 'Fan' in object names; DESCRIPTIONs correction"
+
+ REVISION "201704090000Z"
+ DESCRIPTION "Correction of DESCRIPTIONs."
+
+ REVISION "201704090000Z"
+ DESCRIPTION "Updated description of some object."
+
+ REVISION "201601182020Z"
+ DESCRIPTION "Beta Version."
+ ::= { enterprises 1385 }
+
+
+
+mainInfo OBJECT IDENTIFIER ::= { Montclair 1 }
+networkConfig OBJECT IDENTIFIER ::= { Montclair 3 }
+networkSNMP OBJECT IDENTIFIER ::= { Montclair 5 }
+networkLLDP OBJECT IDENTIFIER ::= { Montclair 7 }
+deviceTime OBJECT IDENTIFIER ::= { Montclair 11 }
+deviceStatus OBJECT IDENTIFIER ::= { Montclair 12 }
+deviceSetting OBJECT IDENTIFIER ::= { Montclair 13 }
+mainDevices OBJECT IDENTIFIER ::= { Montclair 77 }
+
+
+amplifier OBJECT IDENTIFIER ::= { mainDevices 7 }
+amplifierDynamic OBJECT IDENTIFIER ::= { amplifier 2 }
+amplifierSetting OBJECT IDENTIFIER ::= { amplifier 3 }
+
+
+
+--
+-- mainInfo objects .1.3.6.1.4.1.1385.1
+--
+deviceVendor OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "deviceVendor"
+ ::= { mainInfo 1 }
+ -- .1.3.6.1.4.1.1385.1.1.0 --
+
+devicePartNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Model full info (P/N)"
+ ::= { mainInfo 2 }
+
+deviceSerialNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Device Serial Number"
+ ::= { mainInfo 3 }
+
+deviceFirmwareVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Firmware version"
+ ::= { mainInfo 4 }
+
+
+--
+-- networkConfig objects .1.3.6.1.4.1.1385.3
+--
+netDHCPConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(1),
+ on(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DHCP Client Configuration:
+ 1 - Off,
+ 2 - On"
+ ::= { networkConfig 1 }
+ -- .1.3.6.1.4.1.1385.3.1.0 --
+
+netConfigIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Device IP Address"
+ ::= { networkConfig 2 }
+
+netConfigSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Device Subnet Mask"
+ ::= { networkConfig 3 }
+
+netDefaultGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Default Gateway"
+ ::= { networkConfig 4 }
+
+netMACAddress OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Device MAC Address"
+ ::= { networkConfig 5 }
+
+
+--
+-- networkSNMP objects .1.3.6.1.4.1.1385.5
+--
+netSNMPServer1IPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of SNMP (Simple Network Management
+ Protocol) TRAP-server #1 (primary)"
+ ::= { networkSNMP 1 }
+ -- .1.3.6.1.4.1.1385.5.1.0 --
+
+netSNMPServer2IPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of SNMP (Simple Network Management
+ Protocol) TRAP-server #2 (backup)"
+ ::= { networkSNMP 2 }
+
+netSNMPServer3IPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of SNMP (Simple Network Management
+ Protocol) TRAP-server #3 (backup)"
+ ::= { networkSNMP 3 }
+
+netSNMPServer4IPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of SNMP (Simple Network Management
+ Protocol) TRAP-server #4 (backup)"
+ ::= { networkSNMP 4 }
+
+netSNMPTrustedIP1 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of SNMP Trusted IP #1 (primary)"
+ ::= { networkSNMP 5 }
+
+netSNMPTrustedIP2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of SNMP Trusted IP #2"
+ ::= { networkSNMP 6 }
+
+netSNMPTrustedIP3 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of SNMP Trusted IP #3"
+ ::= { networkSNMP 7 }
+
+netSNMPTrustedIP4 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of SNMP Trusted IP #4"
+ ::= { networkSNMP 8 }
+
+netSNMPCommunityRead OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Read Community"
+ ::= { networkSNMP 9 }
+
+netSNMPCommunityWrite OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SNMP Read/Write Community"
+ ::= { networkSNMP 10 }
+
+
+--
+-- networkLLDP objects .1.3.6.1.4.1.1385.7
+--
+netLLDPEnabled OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "LLDP Enabled/Disabled"
+ ::= { networkLLDP 1 }
+ -- .1.3.6.1.4.1.1385.7.1.0 --
+
+netLLDPPeriod OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "LLDP Message Transmission Period"
+ ::= { networkLLDP 2 }
+
+netLLDPRemoteMAC OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Detected Remote Port MAC Address"
+ ::= { networkLLDP 3 }
+
+netLLDPRemotePortID OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Detected Remote Port Identifier (ID)"
+ ::= { networkLLDP 4 }
+
+netLLDPRemotePortDesc OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Detected Remote Port Description"
+ ::= { networkLLDP 5 }
+
+
+--
+-- deviceTime objects .1.3.6.1.4.1.1385.11
+--
+netTimeServerIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Address of SNTP:
+ Simple Network Time Protocol -
+ Time Server"
+ ::= { deviceTime 1 }
+ -- .1.3.6.1.4.1.1385.11.1.0
+
+deviceUNIXTime OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current Time in UNIX(POSIX) Time Notation
+ (Seconds elapsed since 00:00:00,
+ 1 Jan 1970 UTC"
+ ::= { deviceTime 2 }
+
+deviceTimeZone OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Local Time Zone (The offset from
+ Coordinated Universal Time (UTC)), minutes"
+ ::= { deviceTime 3 }
+
+deviceDateTime OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DateTime, string"
+ ::= { deviceTime 4 }
+
+deviceOperationTime OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Summary Operation time, seconds"
+ ::= { deviceTime 5 }
+
+
+--
+-- deviceStatus .1.3.6.1.4.1.1385.12
+--
+status OBJECT-TYPE
+ SYNTAX INTEGER {
+ emergency(1),
+ alert(2),
+ critical(3),
+ error(4),
+ warning(5),
+ notice(6),
+ normal(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Device Common Status"
+ ::= { deviceStatus 1 }
+
+deviceInternalTemperatute OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Case Temperatute, degree"
+ ::= { deviceStatus 2 }
+
+devicePowerSupplyAmount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PowerSupply Amount"
+ ::= { deviceStatus 3 }
+
+devicePowerSupply1Status OBJECT-TYPE
+ SYNTAX INTEGER {
+ undef(1),
+ critical(3),
+ normal(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PowerSupply1 Status"
+ ::= { deviceStatus 4 }
+
+devicePowerSupply2Status OBJECT-TYPE
+ SYNTAX INTEGER {
+ undef(1),
+ critical(3),
+ normal(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PowerSupply2 Status"
+ ::= { deviceStatus 5 }
+
+deviceFanAmount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fans Amount"
+ ::= { deviceStatus 6 }
+
+deviceFanStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ critical(3),
+ warning(5),
+ normal(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fans status"
+ ::= { deviceStatus 7 }
+
+deviceFanMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto(1),
+ manual(2),
+ low(3),
+ linear(4),
+ high(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fan Operation Mode:
+ auto(1); manual(2) - forced set value;
+ low(3), linear(4) or high(5) - the current condition of automatic fan mode operation"
+ ::= { deviceStatus 8 }
+
+deviceFun1Speed OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fan1 Speed, RPM"
+ ::= { deviceStatus 9 }
+
+deviceFun2Speed OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fan2 Speed, RPM"
+ ::= { deviceStatus 10 }
+
+deviceFun3Speed OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Fan3 Speed, RPM"
+ ::= { deviceStatus 11 }
+
+
+
+--
+-- deviceSetting objects .1.3.6.1.4.1.1385.13
+--
+deviceFanModeSet OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto(1),
+ manual(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "deviceFanMode, Auto Mode On/Off"
+ ::= { deviceSetting 1 }
+
+deviceFanPowerSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "deviceFanPowerSet, Set Value of Fan Air Flow for Manual Mode, %"
+ ::= { deviceSetting 2 }
+
+deviceFanMinimumSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "deviceFanMinimum, Min Value of Fan Air Flow for Auto Mode, %"
+ ::= { deviceSetting 3 }
+
+deviceFanMaximumSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "PFanMax, Max Value of Fan Air Flow for Auto Mode, %"
+ ::= { deviceSetting 4 }
+
+deviceFanTemperatureLowThrSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "TCaseMin, Min Value of Case Temperature for Auto Mode, centigrade degree"
+ ::= { deviceSetting 5 }
+
+deviceFanTemperatureHighThrSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "TCaseMax, Max Value of Case Temperature for Auto Mode, centigrade degree"
+ ::= { deviceSetting 6 }
+
+
+
+--
+-- amplifierDynamic objects .1.3.6.1.4.1.1385.77.7.2
+--
+opticalSwitchInput1Power OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "InputPower1*10, input 1 optical power, dBm*10.
+ For example, value -12 means the input 1 optical power is -1.2 dBm."
+ ::= { amplifierDynamic 1 }
+ -- .1.3.6.1.4.1.1385.77.7.2.1.0 --
+
+opticalSwitchInput2Power OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Input2Power*10, input 2 optical power, dBm*10.
+ For example, value 35 means the input 1 optical power is 3.5 dBm."
+ ::= { amplifierDynamic 2 }
+
+opticalSwitchActiveInput OBJECT-TYPE
+ SYNTAX INTEGER {
+ pin1(1),
+ pin2(2),
+ pass(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Active Optical Input:
+ pin1(1) - input 1;
+ pin2(2) - input 2;
+ pass(3) - have one input"
+ ::= { amplifierDynamic 3 }
+
+amplifierBackReflectionPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "BackReflectionPower*10, BackReflectionPower Optical Power, dBm*10.
+ Monitoring of backward optical power. Sensor measure full backward incoming power in dBm.
+ For example, value -378 means the backwar incomind amplifier is -37.8 dBm."
+ ::= { amplifierDynamic 4 }
+
+amplifierInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "InputPower*10, Amplifier Input Optical Power, dBm*10.
+ For example, value 23 means the input optical power is 2.3 dBm."
+ ::= { amplifierDynamic 5 }
+
+amplifierEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "AmpEnable, Amplifier pump current On/Off"
+ ::= { amplifierDynamic 6 }
+
+amplifierMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ acc(1),
+ apc(2),
+ agc(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Amplifier stabilization mode:
+ acc(1) - amplifier pump current stabilization mode;
+ apc(2) - amplifier output power stabilization mode;
+ agc(3) - amplifier gain stabilization mode"
+ ::= { amplifierDynamic 7 }
+
+amplifierPrePumpCurrent OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PrePumpCurrent, Preliminary Pump Current, %"
+ ::= { amplifierDynamic 8 }
+
+amplifierPumpCurrent1 OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PumpCurrent1, Amplifier Pump Current 1, %"
+ ::= { amplifierDynamic 9 }
+
+amplifierPumpCurrent2 OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PumpCurrent2, Amplifier Pump Current 2, %"
+ ::= { amplifierDynamic 10 }
+
+
+amplifierOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Pout*10, Output optical power, dBm*10"
+ ::= { amplifierDynamic 11 }
+
+amplifierGain OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Gain, Amlifier gain, dB*10"
+ ::= { amplifierDynamic 12 }
+
+amplifierPortAmount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PortAmount (PortsNumber), pcs"
+ ::= { amplifierDynamic 13 }
+
+amplifierPortOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PortOutputPower, Amlifier PortOutputPower, dBm*10"
+ ::= { amplifierDynamic 14 }
+
+amplifierPortGain OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Gain per Port, Calculated from InputPower and PortOutputPower, dB*10"
+ ::= { amplifierDynamic 15 }
+
+
+amplifierRadiatorTemperature OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "RadiatorTemperature, Main Radiator Temperature, centigrade degree"
+ ::= { amplifierDynamic 16 }
+
+amplifierPrePumpTemperature OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "PrePumpTemperature*10, Pre Pump Diod TEC Temperature, centigrade degree*10"
+ ::= { amplifierDynamic 17 }
+
+amplifierAPSbyInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "amplifierAPSbyInputPower"
+ ::= { amplifierDynamic 18 }
+
+amplifierAPSbyBackReflection OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "amplifierAPSbyBackReflection"
+ ::= { amplifierDynamic 19 }
+
+amplifierAPSbyTemperature OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "amplifierAPSbyTemperature"
+ ::= { amplifierDynamic 20 }
+
+
+--
+-- amplifierSetting objects .1.3.6.1.4.1.1385.77.7.3
+--
+opticalSwitchModeSet OBJECT-TYPE
+ SYNTAX INTEGER {
+ input1manual(1),
+ input2manual(2),
+ auto(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Switching Operation Mode"
+ ::= { amplifierSetting 1 }
+
+opticalSwitchDeltaSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Maximum |Pin1-Pin2| Difference for Optical Switch Commutation, dB"
+ ::= { amplifierSetting 2 }
+
+amplifierAPSSet OBJECT-TYPE
+ SYNTAX INTEGER {
+ on(1),
+ off(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "amplifier APS Set, Amplifier Automatic Power Shotdown Mode On/Off"
+ ::= { amplifierSetting 3 }
+
+amplifierModeSet OBJECT-TYPE
+ SYNTAX INTEGER {
+ acc(1),
+ apc(2),
+ agc(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Amplifier Stabilization Mode,
+ acc(1) - Amplifier Current Stabilization Mode,
+ apc(2) - Amplifier Pout Stabilization Mode,
+ agc(3) - Amplifier Gain Stabilization Mode"
+ ::= { amplifierSetting 4 }
+
+amplifierPrePumpCurrentSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "amplifierPrePumpCurrentSet, Set Value of Preliminary Pump Laser Diode Current, mA"
+ ::= { amplifierSetting 5 }
+
+amplifierPumpCurrent1Set OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "amplifierPumpCurrent1Set, Set Value of Amplifier Laser Diode Pump Current, mA"
+ ::= { amplifierSetting 6 }
+
+amplifierPumpCurrent2Set OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "amplifierPumpCurrent2Set, Set Value of Amplifier Laser Diode Pump Current, mA"
+ ::= { amplifierSetting 7 }
+
+amplifierOutputPowerSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "amplifierOutputPowerSet*10, Set Value of Output Optical Power, dBm*10"
+ ::= { amplifierSetting 8 }
+
+amplifierGainSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "amplifierGainSet*10, Set Value of Output Optical Power, dBm*10"
+ ::= { amplifierSetting 9 }
+
+amplifierPortOutputPowerSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "amplifierPortOutputPowerSet*10, Set Value of Output Optical Power, dBm*10"
+ ::= { amplifierSetting 10 }
+
+amplifierPortGainSet OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "amplifierPortGainSet*10, Set Value of Output Optical Power, dBm*10"
+ ::= { amplifierSetting 11 }
+
+
+
+--
+--
+-- Compliance statements
+--
+--
+
+mainConformance OBJECT IDENTIFIER ::= { Montclair 9 }
+devicesConformance OBJECT IDENTIFIER ::= { mainConformance 77 }
+
+--
+-- local Devices Groups BEGIN
+--
+
+mainInfoGroup OBJECT-GROUP
+ OBJECTS {
+ deviceVendor,
+ devicePartNumber,
+ deviceSerialNumber,
+ deviceFirmwareVersion
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for mainInfo"
+ ::= { mainConformance 1 }
+
+
+networkConfigGroup OBJECT-GROUP
+ OBJECTS {
+ netDHCPConfig,
+ netConfigIPAddress,
+ netConfigSubnetMask,
+ netDefaultGateway,
+ netMACAddress,
+ netSNMPServer1IPAddress,
+ netSNMPServer2IPAddress,
+ netSNMPServer3IPAddress,
+ netSNMPServer4IPAddress,
+ netSNMPTrustedIP1,
+ netSNMPTrustedIP2,
+ netSNMPTrustedIP3,
+ netSNMPTrustedIP4,
+ netSNMPCommunityRead,
+ netSNMPCommunityWrite,
+ netLLDPEnabled,
+ netLLDPPeriod,
+ netLLDPRemoteMAC,
+ netLLDPRemotePortID,
+ netLLDPRemotePortDesc,
+ netTimeServerIPAddress
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for networkConfig"
+ ::= { mainConformance 3 }
+
+deviceTimeGroup OBJECT-GROUP
+ OBJECTS {
+ deviceUNIXTime,
+ deviceTimeZone,
+ deviceDateTime,
+ deviceOperationTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for deviceTime"
+ ::= { mainConformance 11 }
+
+deviceStatusGroup OBJECT-GROUP
+ OBJECTS {
+ status,
+ deviceInternalTemperatute,
+ devicePowerSupplyAmount,
+ devicePowerSupply1Status,
+ devicePowerSupply2Status,
+ deviceFanAmount,
+ deviceFanStatus,
+ deviceFanMode,
+ deviceFun1Speed,
+ deviceFun2Speed,
+ deviceFun3Speed,
+ deviceFanModeSet,
+ deviceFanPowerSet,
+ deviceFanMinimumSet,
+ deviceFanMaximumSet,
+ deviceFanTemperatureLowThrSet,
+ deviceFanTemperatureHighThrSet
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for deviceStatus"
+ ::= { mainConformance 12 }
+
+deviceSettingGroup OBJECT-GROUP
+ OBJECTS {
+ status,
+ deviceInternalTemperatute,
+ devicePowerSupplyAmount,
+ devicePowerSupply1Status,
+ devicePowerSupply2Status,
+ deviceFanAmount,
+ deviceFanStatus,
+ deviceFanMode,
+ deviceFun1Speed,
+ deviceFun2Speed,
+ deviceFun3Speed
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for deviceSetting"
+ ::= { mainConformance 13 }
+
+amplifierGroup OBJECT-GROUP
+ OBJECTS {
+ amplifierBackReflectionPower,
+ amplifierInputPower,
+ amplifierEnabled,
+ amplifierMode,
+ amplifierPrePumpCurrent,
+ amplifierPumpCurrent1,
+ amplifierPumpCurrent2,
+ amplifierOutputPower,
+ amplifierGain,
+ amplifierPortAmount,
+ amplifierPortOutputPower,
+ amplifierPortGain,
+ amplifierRadiatorTemperature,
+ amplifierPrePumpTemperature,
+ amplifierAPSbyInputPower,
+ amplifierAPSbyBackReflection,
+ amplifierAPSbyTemperature,
+ opticalSwitchModeSet,
+ opticalSwitchDeltaSet,
+ amplifierAPSSet,
+ amplifierModeSet,
+ amplifierPrePumpCurrentSet,
+ amplifierPumpCurrent1Set,
+ amplifierPumpCurrent2Set,
+ amplifierOutputPowerSet,
+ amplifierGainSet,
+ amplifierPortOutputPowerSet,
+ amplifierPortGainSet,
+ opticalSwitchInput1Power,
+ opticalSwitchInput2Power,
+ opticalSwitchActiveInput
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for amplifier"
+ ::= { devicesConformance 7 }
+
+
+END
+
|