diff options
Diffstat (limited to 'MIBS/junose/Juniper-HTTP-Profile-MIB')
| -rw-r--r-- | MIBS/junose/Juniper-HTTP-Profile-MIB | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/MIBS/junose/Juniper-HTTP-Profile-MIB b/MIBS/junose/Juniper-HTTP-Profile-MIB new file mode 100644 index 0000000..7f6a272 --- /dev/null +++ b/MIBS/junose/Juniper-HTTP-Profile-MIB @@ -0,0 +1,171 @@ + +-- ***************************************************************************** +-- Juniper-HTTP-Profile-MIB +-- +-- Juniper Networks Enterprise MIB +-- HTTP Profile MIB +-- +-- Copyright (c) 2005 Juniper Networks, Inc. All Rights Reserved. +-- ***************************************************************************** + +Juniper-HTTP-Profile-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + DisplayString + FROM SNMPv2-TC + juniMibs + FROM Juniper-MIBs + JuniSetMap + FROM Juniper-TC; + +juniHttpProfileMIB MODULE-IDENTITY + LAST-UPDATED "200508191421Z" -- 19-Aug-05 02:21 PM EDT + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Networks, Inc. + Postal: 10 Technology Park Drive + Westford, MA 01886-3146 + USA + Tel: +1 978 589 5800 + Email: mib@Juniper.net" + DESCRIPTION + "The HTTP rofile MIB for the Juniper Networks, Inc. enterprise." + -- Revision History + REVISION "200508191421Z" -- 19-Aug-05 02:21 PM EDT = JUNOSe 8.0 + DESCRIPTION + "Initial version of this MIB module." + ::= { juniMibs 79 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Managed objects +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniHttpProfileObjects OBJECT IDENTIFIER ::= { juniHttpProfileMIB 1 } +juniHttpProfile OBJECT IDENTIFIER ::= { juniHttpProfileObjects 1 } + +-- +-- This MIB defines configuration profile structure for ATM interfaces. +-- The creation/deletion of profiles and mapping of profile names to profile +-- indices is coordinated in the Juniper-PROFILE-MIB. +-- +-- +-- The ATM 1483 Profile Table +-- +juniHttpProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniHttpProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains profiles for configuring bulk ATM circuits. + + Entries in this table are created/deleted as a side-effect of + corresponding operations to the juniProfileNameTable in the + Juniper-PROFILE-MIB." + ::= { juniHttpProfile 1 } + +juniHttpProfileEntry OBJECT-TYPE + SYNTAX JuniHttpProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A profile describing VCC configuration of an ATM subinterface." + INDEX { juniHttpProfileId } + ::= { juniHttpProfileTable 1 } + +JuniHttpProfileEntry ::= SEQUENCE { + juniHttpProfileId Unsigned32, + juniHttpProfileSetMap JuniSetMap, + juniHttpProfileRedirectUrl DisplayString } + +juniHttpProfileId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The integer identifier associated with this profile. A value for this + identifier is determined by locating or creating a profile name in the + juniProfileNameTable." + ::= { juniHttpProfileEntry 1 } + +juniHttpProfileSetMap OBJECT-TYPE + SYNTAX JuniSetMap + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bitmap representing which objects in this entry have been explicitly + configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for + details of use. + + The INDEX object(s) and this object are excluded from representation + (i.e. their bits are never set). + + When a SET request does not explicitly configure JuniSetMap, bits in + JuniSetMap are set as a side-effect of configuring other profile + attributes in the same entry. + + If, however, a SET request explicitly configures JuniSetMap, the + explicitly configured value overrides 1) any previous bit settings, and + 2) any simultaneous 'side-effect' settings that would otherwise occur. + + Once set, bits can only be cleared by explicitly configuring + JuniSetMap." + ::= { juniHttpProfileEntry 2 } + +juniHttpProfileRedirectUrl OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is a 64 byte string that will be used as the redirect + URL when requests arrive at the HTTP server over the Ip Interface + configured." + ::= { juniHttpProfileEntry 3 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Notifications +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- No notifications are defined in this MIB. + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Conformance information +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniHttpProfileConformance OBJECT IDENTIFIER + ::= { juniHttpProfileMIB 4 } +juniHttpProfileCompliances OBJECT IDENTIFIER + ::= { juniHttpProfileConformance 1 } +juniHttpProfileGroups OBJECT IDENTIFIER + ::= { juniHttpProfileConformance 2 } + +-- +-- compliance statements +-- +juniHttpProfileCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance statement for entities which implement the Juniper + HTTP Profile MIB." + MODULE -- this module + MANDATORY-GROUPS { + juniHttpProfileGroup } + ::= { juniHttpProfileCompliances 1 } -- JUNOSe 8.0 + +-- +-- units of conformance +-- +juniHttpProfileGroup OBJECT-GROUP + OBJECTS { + juniHttpProfileSetMap, + juniHttpProfileRedirectUrl } + STATUS current + DESCRIPTION + "Current collection of objects providing management of profile + functionality for per Interface HTTP objects in a Juniper product." + ::= { juniHttpProfileGroups 1 } + +END |