diff options
Diffstat (limited to 'MIBS/junose/Juniper-FRACTIONAL-T1-MIB')
| -rw-r--r-- | MIBS/junose/Juniper-FRACTIONAL-T1-MIB | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/MIBS/junose/Juniper-FRACTIONAL-T1-MIB b/MIBS/junose/Juniper-FRACTIONAL-T1-MIB new file mode 100644 index 0000000..93d8aab --- /dev/null +++ b/MIBS/junose/Juniper-FRACTIONAL-T1-MIB @@ -0,0 +1,305 @@ + +-- ***************************************************************************** +-- Juniper-FRACTIONAL-T1-MIB +-- +-- Juniper Networks Enterprise MIB +-- Fractional T1 MIB +-- +-- Copyright (c) 1998, 1999 Redstone Communications, Inc. +-- Copyright (c) 1999, 2000 Unisphere Networks, Inc. +-- Copyright (c) 2002 Juniper Networks, Inc. +-- All Rights Reserved. +-- ***************************************************************************** + +Juniper-FRACTIONAL-T1-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE + FROM SNMPv2-SMI + RowStatus + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + InterfaceIndex, InterfaceIndexOrZero + FROM IF-MIB + juniMibs + FROM Juniper-MIBs + JuniNextIfIndex, JuniTimeSlotMap + FROM Juniper-TC; + +juniFt1MIB MODULE-IDENTITY + LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Networks, Inc. + Postal: 10 Technology Park Drive + Westford MA 01886-3146 + USA + Tel: +1 978 589 5800 + Email: mib@Juniper.net" + DESCRIPTION + "The Fractional T1 MIB for the Juniper Networks enterprise." + -- Revision History + REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 + DESCRIPTION + "Replaced Unisphere names with Juniper names." + REVISION "200009261730Z" -- 26-Sep-00 01:50 PM EDT - JUNOSe 3.0 + DESCRIPTION + "Make it SMIv2 conformant." + REVISION "9907140000Z" -- 14-Jul-99 + DESCRIPTION + "Obsoleted juniFt1IfDataPolarity and updated corresponding compliances." + REVISION "9811130000Z" -- 13-Nov-98 + DESCRIPTION + "Initial version of this MIB module." + ::= { juniMibs 6 } + + +-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Managed objects +-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniFt1Objects OBJECT IDENTIFIER ::= { juniFt1MIB 1 } + +-- +-- This MIB contains managed objects for Fractional T1 arrangements. +-- Management objects are provided to query for an available +-- interface index, and to create/delete interfaces of this type. +-- Creating/deleting this interface type using this MIB has +-- the side effect of creating/deleting corresponding entries +-- in the Interface MIB ifTable/ifXTable, and in the Juniper +-- Enterprise Interface MIB juniIfTable. +-- + +-- ////////////////////////////////////////////////////////////////////// +-- +-- Fractional T1 Interfaces +-- +-- ////////////////////////////////////////////////////////////////////// +-- +-- IfIndex selection for creating new FT1 interfaces +-- +juniFt1NextIfIndex OBJECT-TYPE + SYNTAX JuniNextIfIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Coordinate ifIndex value allocation for entries in juniFt1IfTable. + + A GET of this object returns the next available ifIndex value to be used + to create an entry in the associated interface table; or zero, if no + valid ifIndex value is available. This object also returns a value of + zero when it is the lexicographic successor of a varbind presented in an + SNMP GETNEXT or GETBULK request, for which circumstance it is assumed + that ifIndex allocation is unintended. + + Successive GETs will typically return different values, thus avoiding + collisions among cooperating management clients seeking to create table + entries simultaneously." + ::= { juniFt1Objects 1 } + + +-- +-- The FT1 Interface Table +-- +juniFt1IfTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniFt1IfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for FT1 interfaces present in the system." + ::= { juniFt1Objects 2 } + +juniFt1IfEntry OBJECT-TYPE + SYNTAX JuniFt1IfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an FT1 interface. + Creating/deleting entries in this table causes corresponding entries for + be created /deleted in ifTable/ifXTable/juniIfTable." + INDEX { juniFt1IfIndex } + ::= { juniFt1IfTable 1 } + +JuniFt1IfEntry ::= SEQUENCE { + juniFt1IfIndex InterfaceIndex, + juniFt1IfRowStatus RowStatus, + juniFt1IfLowerIfIndex InterfaceIndexOrZero, + juniFt1IfTimeSlotMap JuniTimeSlotMap, + juniFt1IfTimeSlotRate INTEGER, + juniFt1IfDataPolarity INTEGER, + juniFt1IfLoopbackConfig INTEGER } + +juniFt1IfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifIndex of the FT1 interface. When creating entries in this table, + suitable values for this object are determined by reading + juniFt1NextIfIndex." + ::= { juniFt1IfEntry 1 } + +juniFt1IfRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniFt1IfRowStatus + juniFt1IfLowerIfIndex + juniFt1IfTimeSlotMap + + In addition, when creating an entry the following conditions must hold: + + A value for juniFt1IfIndex must have been determined previously, by + reading juniFt1NextIfIndex. + + The DS1 interface identified by juniFt1IfLowerIfIndex must exist. + + The DS0s specified in juniFt1IfTimeSlotMap must be available + (unallocated) on the DS1 interface identified by + juniFt1IfLowerIfIndex. + + A corresponding entry in ifTable/ifXTable/juniIfTable is created/ + destroyed as a result of creating/destroying an entry in this table." + ::= { juniFt1IfEntry 2 } + +juniFt1IfLowerIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ifIndex of a DS1 interface over which this FT1 interface is to be + layered. A value of zero indicates no layering. An implementation may + choose to require that a nonzero value be configured at entry creation." + ::= { juniFt1IfEntry 3 } + +juniFt1IfTimeSlotMap OBJECT-TYPE + SYNTAX JuniTimeSlotMap + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A bitmap representing the DS0s on the underlying DS1 interface that + have been allocated to this FT1 interface." + ::= { juniFt1IfEntry 4 } + +juniFt1IfTimeSlotRate OBJECT-TYPE + SYNTAX INTEGER { + nx56kbps(0), + nx64kbps(1) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Data rate per time slot allocated to this FT1 interface." + DEFVAL { nx64kbps } + ::= { juniFt1IfEntry 5 } + +juniFt1IfDataPolarity OBJECT-TYPE + SYNTAX INTEGER { + normal(0), + inverted(1) } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "Obsolete. Polarity of data transmitted on this FT1 interface. + Inverted data is used for certain line coding configurations to ensure + sufficient one's density for timing recovery by the remote end." + DEFVAL { normal } + ::= { juniFt1IfEntry 6 } + +juniFt1IfLoopbackConfig OBJECT-TYPE + SYNTAX INTEGER { + noLoop(0), + loop(1) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Selects loopback configuration. loop(1) causes received data to be + looped back out the transmitter." + DEFVAL { noLoop } + ::= { juniFt1IfEntry 7 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Notifications +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- No notifications are defined in this MIB. Placeholders follow. +-- juniFt1TrapControl OBJECT IDENTIFIER ::= { juniFt1MIB 2 } +-- juniFt1Traps OBJECT IDENTIFIER ::= { juniFt1MIB 3 } +-- juniFt1TrapPrefix OBJECT IDENTIFIER ::= { juniFt1Traps 0 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Conformance information +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniFt1Conformance OBJECT IDENTIFIER ::= { juniFt1MIB 4 } +juniFt1Compliances OBJECT IDENTIFIER ::= { juniFt1Conformance 1 } +juniFt1Groups OBJECT IDENTIFIER ::= { juniFt1Conformance 2 } + +-- +-- compliance statements +-- +juniFt1Compliance MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "Obsolete compliance statement for entities that implement the Juniper + FT1 MIB. This statement became obsolete when the interface data + polarity object was obsoleted." + MODULE -- this module + MANDATORY-GROUPS { + juniFt1Group } + ::= { juniFt1Compliances 1 } + +juniFt1Compliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities that implement the Juniper FT1 + MIB." + MODULE -- this module + MANDATORY-GROUPS { + juniFt1Group2 } + ::= { juniFt1Compliances 2 } + +-- +-- units of conformance +-- +juniFt1Group OBJECT-GROUP + OBJECTS { + juniFt1NextIfIndex, + + juniFt1IfRowStatus, + juniFt1IfLowerIfIndex, + juniFt1IfTimeSlotMap, + juniFt1IfTimeSlotRate, + juniFt1IfDataPolarity, + juniFt1IfLoopbackConfig } + STATUS obsolete + DESCRIPTION + "Obsolete collection of objects providing management of FT1 interfaces + in a Juniper product. This group became obsolete when the interface + data polarity object was obsoleted." + ::= { juniFt1Groups 1 } + +juniFt1Group2 OBJECT-GROUP + OBJECTS { + juniFt1NextIfIndex, + + juniFt1IfRowStatus, + juniFt1IfLowerIfIndex, + juniFt1IfTimeSlotMap, + juniFt1IfTimeSlotRate, + juniFt1IfLoopbackConfig } + STATUS current + DESCRIPTION + "A collection of objects providing management of FT1 interfaces in a + Juniper product." + ::= { juniFt1Groups 2 } + +END |