diff options
Diffstat (limited to 'MIBS/junose/Juniper-DS3-MIB')
| -rw-r--r-- | MIBS/junose/Juniper-DS3-MIB | 802 |
1 files changed, 802 insertions, 0 deletions
diff --git a/MIBS/junose/Juniper-DS3-MIB b/MIBS/junose/Juniper-DS3-MIB new file mode 100644 index 0000000..96ef536 --- /dev/null +++ b/MIBS/junose/Juniper-DS3-MIB @@ -0,0 +1,802 @@ + +-- ***************************************************************************** +-- Juniper-DS3-MIB +-- +-- Juniper Networks Enterprise MIB +-- DS3 MIB +-- +-- Copyright (c) 1998, 1999 Redstone Communications, Inc. +-- Copyright (c) 1999, 2002 Unisphere Networks, Inc. +-- Copyright (c) 2002, 2003 Juniper Networks, Inc. +-- All Rights Reserved. +-- ***************************************************************************** + +Juniper-DS3-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + ifIndex, InterfaceIndexOrZero + FROM IF-MIB + TruthValue, RowStatus, DisplayString + FROM SNMPv2-TC + JuniNextIfIndex + FROM Juniper-TC + juniMibs + FROM Juniper-MIBs + PerfCurrentCount, PerfIntervalCount, PerfTotalCount + FROM PerfHist-TC-MIB + dsx3FarEndCurrentEntry, dsx3FarEndIntervalEntry, dsx3FarEndTotalEntry, + dsx3FarEndConfigEntry + FROM DS3-MIB; + +juniDs3MIB MODULE-IDENTITY + LAST-UPDATED "200309301211Z" -- 30-Sep-03 08:11 AM EDT + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Networks, Inc. + Postal: 10 Technology Park Drive + Westford, MA 01886-3146 + USA + Tel: +1 978 589 5800 + E-mail: mib@Juniper.net" + DESCRIPTION + "The DS3 MIB for the Juniper Networks enterprise. This MIB contains + managed objects for DS3/E3 interfaces. Management objects are provided + to supplement those found in the standard DS3-MIB (RFC 2496)." + -- Revision History + REVISION "200410120651Z" -- 12-Oct-04 01:51 AM EST - RX 5.0.4 + DESCRIPTION + "Changed the upper bound value of juniDsx3LineLength from 64000 to 137 + meters." + REVISION "200309301211Z" -- 30-Sep-03 08:11 AM EDT - JUNOSe 5.3 + DESCRIPTION + "Changed the standard MIB support from the RFC1407-MIB (SMIv1) to the + DS3-MIB (SMIv2)." + REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 + DESCRIPTION + "Replaced Unisphere names with Juniper names." + REVISION "200209121659Z" -- 12-Sep-02 12:59 PM EDT - JUNOSe 4.1 + DESCRIPTION + "Added support for far end MDL generator number and port number. + Added support for far end MDL carrier." + REVISION "200204041407Z" -- 04-Apr-02 09:07 AM EST - JUNOSe 4.0 + DESCRIPTION + "Added invalid seconds objects to the far end statistics tables and more + configuration objects." + REVISION "200202222121Z" -- 22-Feb-02 04:21 PM EST - JUNOSe 3.3 + DESCRIPTION + "Modified the valid range for juniDsx3Ds3Channel" + REVISION "200104271949Z" -- 27-Apr-01 03:49 PM EDT - JUNOSe 3.0 + DESCRIPTION + "Added dynamic DS3 interface support." + REVISION "200102050000Z" -- 05-Feb-01 - JUNOSe 2.6 + DESCRIPTION + "Added following objects: + juniDsx3Ds3DsuMode + juniDsx3Ds3BandwidthLimit + juniDsx3Ds3DsuScrambleMode" + REVISION "9907270000Z" -- 27-Jul-99 - JUNOSe 1.1 + DESCRIPTION + "Added juniDsx3LineType and juniDsx3CellScramblerConfig." + REVISION "9811130000Z" -- 13-Nov-98 - JUNOSe 1.0 + DESCRIPTION + "Initial version of this MIB module." + ::= { juniMibs 4 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Managed objects +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniDs3Objects OBJECT IDENTIFIER ::= { juniDs3MIB 1 } + + +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- DS3 Interfaces +-- +-- ///////////////////////////////////////////////////////////////////////////// +-- +-- The DS3 Configuration Table +-- +juniDsx3ConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniDsx3ConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for DS3/E3 interfaces present in the + system." + ::= { juniDs3Objects 1 } + +juniDsx3ConfigEntry OBJECT-TYPE + SYNTAX JuniDsx3ConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an DS3/E3 interface." + INDEX { ifIndex } + ::= { juniDsx3ConfigTable 1 } + +JuniDsx3ConfigEntry ::= SEQUENCE { + juniDsx3LineLength Integer32, + juniDsx3LineType INTEGER, + juniDsx3CellScramblerConfig INTEGER, + juniDsx3Channelization TruthValue, + juniDsx3InterfaceType INTEGER, + juniDsx3Application INTEGER, + juniDsx3Ds3Channel INTEGER, + juniDsx3LowerIfIndex InterfaceIndexOrZero, + juniDsx3RowStatus RowStatus, + juniDsx3Ds3DsuMode INTEGER, + juniDsx3Ds3BandwidthLimit INTEGER, + juniDsx3Ds3DsuScrambleMode INTEGER, + juniDsx3MdlCarrier INTEGER, + juniDsx3MdlTransmit INTEGER, + juniDsx3MdlEic DisplayString, + juniDsx3MdlLic DisplayString, + juniDsx3MdlFic DisplayString, + juniDsx3MdlUnit DisplayString, + juniDsx3MdlPfi DisplayString, + juniDsx3MdlPort DisplayString, + juniDsx3MdlGenerator DisplayString } + +juniDsx3LineLength OBJECT-TYPE + SYNTAX Integer32 (0..137) + UNITS "meters" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The length of the DS3/E3 line in meters. This objects provides + information for line build out circuitry. This object is only useful if + the interface has configurable line build out circuitry." + ::= { juniDsx3ConfigEntry 1 } + +juniDsx3LineType OBJECT-TYPE + SYNTAX INTEGER { + juniDsx3other(1), + juniDsx3M23(2), + juniDsx3SYNTRAN(3), + juniDsx3CbitParity(4), + juniDsx3ClearChannel(5), + juniE3G832(6), + juniE3Framed(7), + juniE3Plcp(8), + juniDsx3M23Plcp(18), + juniDsx3CbitParityPlcp(20) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable indicates the variety of DS3 C-bit or E3 application + implementing this interface. The type of interface affects the + interpretation of the usage and error statistics. The rate of DS3 is + 44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means + that the C-bits are not used except for sending/receiving AIS. Note + that this object represents the actual line type when the corresponding + value of dsx3LineType is dsx3other(1). + + The values, in sequence, describe: + TITLE: SPECIFICATION: + dsx3M23 ANSI T1.107-1988 + dsx3SYNTRAN ANSI T1.107-1988 + dsx3CbitParity ANSI T1.107a-1989 + dsx3ClearChannel ANSI T1.102-1987 + e3G832 ITU-T G.832 + e3Framed ITU-T G.751 + e3Plcp ETSI T/NA(91)18. + dsx3M23Plcp ATM Forum af-phy-0054.000 + dsx3CbitParityPlcp ATM Forum af-phy-0054.000 " + ::= { juniDsx3ConfigEntry 2 } + +juniDsx3CellScramblerConfig OBJECT-TYPE + SYNTAX INTEGER { + scramblerOn(1), + scramblerOff(2), + notSupported(3) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable indicates the state of the ATM cell scrambler for + interfaces which support ATM over DS3 or E3. For interfaces which do + not support ATM, this object returns the value notSupported(3)." + ::= { juniDsx3ConfigEntry 3 } + +juniDsx3Channelization OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The channelization setting for this DS3 interface; true(1) indicates + channelization, false(2) indicates no channelization." + ::= { juniDsx3ConfigEntry 4 } + +juniDsx3InterfaceType OBJECT-TYPE + SYNTAX INTEGER { + ds3T3(0), + ds3E3(1) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DS3 interface type setting." + ::= { juniDsx3ConfigEntry 5 } + +juniDsx3Application OBJECT-TYPE + SYNTAX INTEGER { + ds3FrameOverDs3(0), + ds3AtmOverDs3(1) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The interface application setting." + ::= { juniDsx3ConfigEntry 6 } + +juniDsx3Ds3Channel OBJECT-TYPE + SYNTAX INTEGER (1..28) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DS3 channel setting. The range of channel settings depends on the + line rate of the underlying interface." + ::= { juniDsx3ConfigEntry 7 } + +juniDsx3LowerIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ifIndex of the interface over which this DS3 interface is to be + layered. A value of zero indicates no layering. An implementation may + choose to require that a nonzero value be configured at entry creation." + ::= { juniDsx3ConfigEntry 8 } + +juniDsx3RowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support setting the + following values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniDsx3RowStatus + juniDsx3LowerIfIndex + + In addition, when creating an entry the following conditions must hold: + + A value for ifIndex must have been determined previously, by reading + juniDsx3NextIfIndex. + + The interface identified by juniDsx3LowerIfIndex must exist. + + A corresponding entry in ifTable/ifXTable/juniIfTable is created/ + destroyed as a result of creating/destroying an entry in this table." + ::= { juniDsx3ConfigEntry 9 } + +juniDsx3Ds3DsuMode OBJECT-TYPE + SYNTAX INTEGER { + ds3DsuModeNone(0), + ds3DsuLarsCom(2), + ds3DsuDigitalLink(4) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DSU configuration setting for this entry." + DEFVAL { ds3DsuModeNone } + ::= { juniDsx3ConfigEntry 10 } + +juniDsx3Ds3BandwidthLimit OBJECT-TYPE + SYNTAX INTEGER (0..44210) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DSU bandwidth configuration for this entry." + DEFVAL { 0 } + ::= { juniDsx3ConfigEntry 11 } + +juniDsx3Ds3DsuScrambleMode OBJECT-TYPE + SYNTAX INTEGER { + ds3DsuScrambleDisabled(0), + ds3DsuScrambleEnable(1) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The DSU scramble mode setting for this entry." + DEFVAL { ds3DsuScrambleDisabled } + ::= { juniDsx3ConfigEntry 12 } + +juniDsx3MdlCarrier OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the interface is used in carrier environment." + DEFVAL { disabled } + ::= { juniDsx3ConfigEntry 13 } + +juniDsx3MdlTransmit OBJECT-TYPE + SYNTAX INTEGER { + path(1), + idlesignal(2), + pathIdlesignal(3), + testsignal(4), + pathTestsignal(5), + idlesignalTestsignal(6), + pathIdlesignalTestsignal(7), + none(8) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies transmission enabling." + DEFVAL { none } + ::= { juniDsx3ConfigEntry 14 } + +juniDsx3MdlEic OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..10)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the equipment identification code." + DEFVAL { "" } + ::= { juniDsx3ConfigEntry 15 } + +juniDsx3MdlLic OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..11)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the location identification code." + DEFVAL { "" } + ::= { juniDsx3ConfigEntry 16 } + +juniDsx3MdlFic OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..10)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the frame identification code." + DEFVAL { "" } + ::= { juniDsx3ConfigEntry 17 } + +juniDsx3MdlUnit OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..6)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the unit identification code." + ::= { juniDsx3ConfigEntry 18 } + +juniDsx3MdlPfi OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..38)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the facility identification code to send in the MDL path + message." + DEFVAL { "" } + ::= { juniDsx3ConfigEntry 19 } + +juniDsx3MdlPort OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..38)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the equipment port number to send in the MDL idle signal + message." + ::= { juniDsx3ConfigEntry 20 } + +juniDsx3MdlGenerator OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..38)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the generator number to send in the MDL test signal message." + ::= { juniDsx3ConfigEntry 21 } + + +juniDs3NextIfIndex OBJECT-TYPE + SYNTAX JuniNextIfIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Coordinate ifIndex value allocation for entries in juniDsx3ConfigTable. + + A GET of this object returns the next available ifIndex value to be used + to create an entry in the associated interface table; or zero, if no + valid ifIndex value is available. This object also returns a value of + zero when it is the lexicographic successor of a varbind presented in an + SNMP GETNEXT or GETBULK request, for which circumstance it is assumed + that ifIndex allocation is unintended. + + Successive GETs will typically return different values, thus avoiding + collisions among cooperating management clients seeking to create table + entries simultaneously." + ::= { juniDs3Objects 2 } + + +-- +-- The DS3 Far End Current +-- +-- The DS3 Far End current table contains statistics being +-- collected for the current 15 minute interval. +-- +juniDsx3FarEndCurrentTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniDsx3FarEndCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for DS3/E3 interfaces present in the + system." + ::= { juniDs3Objects 3 } + +juniDsx3FarEndCurrentEntry OBJECT-TYPE + SYNTAX JuniDsx3FarEndCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an DS3/E3 interface." + AUGMENTS { dsx3FarEndCurrentEntry } + ::= { juniDsx3FarEndCurrentTable 1 } + +JuniDsx3FarEndCurrentEntry ::= SEQUENCE { + juniDsx3FarEndCurrentInvalidSeconds PerfCurrentCount } + +juniDsx3FarEndCurrentInvalidSeconds OBJECT-TYPE + SYNTAX PerfCurrentCount + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The counter associated with the number of Invalid Seconds encountered + by a DS3/E3 interface in the current 15 minute interval." + ::= { juniDsx3FarEndCurrentEntry 1 } + + +-- +-- the DS3 Far End Interval +-- The DS3 Far End Interval Table contains statistics collected by each DS3 +-- Interface over the previous 24 hours of operation. The past 24 hours are +-- broken into 96 completed 15 minute intervals. +-- +juniDsx3FarEndIntervalTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniDsx3FarEndIntervalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for DS3/E3 interfaces present in the + system." + ::= { juniDs3Objects 4 } + +juniDsx3FarEndIntervalEntry OBJECT-TYPE + SYNTAX JuniDsx3FarEndIntervalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an DS3/E3 interface." + AUGMENTS { dsx3FarEndIntervalEntry } + ::= { juniDsx3FarEndIntervalTable 1 } + +JuniDsx3FarEndIntervalEntry ::= SEQUENCE { + juniDsx3FarEndIntervalInvalidSeconds PerfIntervalCount } + +juniDsx3FarEndIntervalInvalidSeconds OBJECT-TYPE + SYNTAX PerfIntervalCount + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The counter associated with the number of Invalid Seconds encountered + by a DS3/E3 interface in one of the previous 96 individual 15 minute + intervals." + ::= { juniDsx3FarEndIntervalEntry 1 } + + +-- +-- the DS3 Far End Total +-- The DS3 Far End Total Table contains the cumulative sum of the +-- statistics for the 24 hour period preceding the current interval. +-- +juniDsx3FarEndTotalTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniDsx3FarEndTotalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for DS3/E3 interfaces present in the + system." + ::= { juniDs3Objects 5 } + +juniDsx3FarEndTotalEntry OBJECT-TYPE + SYNTAX JuniDsx3FarEndTotalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an DS3/E3 interface." + AUGMENTS { dsx3FarEndTotalEntry } + ::= { juniDsx3FarEndTotalTable 1 } + +JuniDsx3FarEndTotalEntry ::= SEQUENCE { + juniDsx3FarEndTotalInvalidSeconds PerfTotalCount } + +juniDsx3FarEndTotalInvalidSeconds OBJECT-TYPE + SYNTAX PerfTotalCount + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The counter associated with the number of Invalid Seconds encountered + by a DS3/E3 interface in the previous 24 hour interval." + ::= { juniDsx3FarEndTotalEntry 1 } + + +-- +-- The DS3 Far End Configuration Table +-- +-- The DS3 Far End Configuration Table contains +-- configuration information +-- reported in the C-bits from the remote end. + +juniDsx3FarEndConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniDsx3FarEndConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for DS3/E3 interfaces present in the + system." + ::= { juniDs3Objects 6 } + +juniDsx3FarEndConfigEntry OBJECT-TYPE + SYNTAX JuniDsx3FarEndConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the far end configuration characteristics of an + DS3/E3 interface." + AUGMENTS { dsx3FarEndConfigEntry } + ::= { juniDsx3FarEndConfigTable 1 } + +JuniDsx3FarEndConfigEntry ::= SEQUENCE { + juniDsx3FarEndPortNumber DisplayString, + juniDsx3FarEndGeneratorNumber DisplayString, + juniDsx3FarEndCarrier INTEGER } + +juniDsx3FarEndPortNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..38)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This code identifies the port number of the Far End DS3. It is sent + within the Idle Signal Message." + ::= { juniDsx3FarEndConfigEntry 1 } + +juniDsx3FarEndGeneratorNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..38)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This code identifies the Far End DS3 Generator Number. It is sent + within the Test Signal Message." + ::= { juniDsx3FarEndConfigEntry 2 } + +juniDsx3FarEndCarrier OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the interface is used in carrier environment. It is sent + with MDL messages." + ::= { juniDsx3FarEndConfigEntry 3 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Notifications +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- No notifications are defined in this MIB. Placeholders follow. +-- juniDs3TrapControl OBJECT IDENTIFIER ::= { juniDs3MIB 2 } +-- juniDs3Traps OBJECT IDENTIFIER ::= { juniDs3MIB 3 } +-- juniDs3TrapPrefix OBJECT IDENTIFIER ::= { juniDs3Traps 0 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Conformance information +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniDs3Conformance OBJECT IDENTIFIER ::= { juniDs3MIB 4 } +juniDs3Compliances OBJECT IDENTIFIER ::= { juniDs3Conformance 1 } +juniDs3Groups OBJECT IDENTIFIER ::= { juniDs3Conformance 2 } + +-- +-- compliance statements +-- +juniDs3Compliance MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "Obsolete compliance statement for entities which implement the Juniper + DS3/E3 MIB. This statement became obsolete when support was added for + line type and cell scrambler objects." + MODULE -- this module + MANDATORY-GROUPS { + juniDs3Group } + ::= { juniDs3Compliances 1 } -- JUNOSe 1.0 + +juniDs3Compliance2 MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "Obsolete compliance statement for entities which implement the Juniper + DS3/E3 MIB. This statement became obsolete when support was added for + DSU objects." + MODULE -- this module + MANDATORY-GROUPS { + juniDs3Group2 } + ::= { juniDs3Compliances 2 } -- JUNOSe 1.1 + +juniDs3Compliance3 MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "Obsolete compliance statement for entities which implement the Juniper + DS3/E3 MIB. This statement became obsolete when support was added for + dynamic DS3 interface objects." + MODULE -- this module + MANDATORY-GROUPS { + juniDs3Group3 } + ::= { juniDs3Compliances 3 } -- JUNOSe 2.6 + +juniDs3Compliance4 MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "Obsolete compliance statement for entities which implement the Juniper + DS3/E3 MIB. This statement became obsolete when far end invalid seconds + objects and more configuration objects were added." + MODULE -- this module + MANDATORY-GROUPS { + juniDs3Group4 } + ::= { juniDs3Compliances 4 } -- JUNOSe 3.0 + +juniDs3Compliance5 MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "Obsolete compliance statement for entities which implement the Juniper + DS3/E3 MIB. This statement became obsolete when support was added for + far end generator number, port number and carrier." + MODULE -- this module + MANDATORY-GROUPS { + juniDs3Group5, + juniDs3FarEndGroup } + ::= { juniDs3Compliances 5 } -- JUNOSe 4.0 + +juniDs3Compliance6 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities which implement the Juniper + DS3/E3 MIB." + MODULE -- this module + MANDATORY-GROUPS { + juniDs3Group5, + juniDs3FarEndGroup2 } + ::= { juniDs3Compliances 6 } -- JUNOSe 4.1 + +-- +-- units of conformance +-- +juniDs3Group OBJECT-GROUP + OBJECTS { + juniDsx3LineLength } + STATUS obsolete + DESCRIPTION + "Obsolete collection of objects providing management of DS3/E3 + interfaces in a Juniper product. This group became obsolete when + support was added for line type and cell scrambler objects." + ::= { juniDs3Groups 1 } + +juniDs3Group2 OBJECT-GROUP + OBJECTS { + juniDsx3LineLength, + juniDsx3LineType, + juniDsx3CellScramblerConfig } + STATUS obsolete + DESCRIPTION + "Obsolete collection of objects providing management of DS3/E3 + interfaces in a Juniper product. This group became obsolete when + support was added for DSU configuration objects." + ::= { juniDs3Groups 2 } + +juniDs3Group3 OBJECT-GROUP + OBJECTS { + juniDsx3LineLength, + juniDsx3LineType, + juniDsx3CellScramblerConfig, + juniDsx3Ds3DsuMode, + juniDsx3Ds3BandwidthLimit, + juniDsx3Ds3DsuScrambleMode } + STATUS obsolete + DESCRIPTION + "Obsolete collection of objects providing management of DS3/E3 + interfaces in a Juniper product. This group became obsolete when + support was added for dynamic DS3 interface objects." + ::= { juniDs3Groups 3 } + +juniDs3Group4 OBJECT-GROUP + OBJECTS { + juniDsx3LineLength, + juniDsx3LineType, + juniDsx3CellScramblerConfig, + juniDsx3Channelization, + juniDsx3InterfaceType, + juniDsx3Application, + juniDsx3Ds3Channel, + juniDsx3LowerIfIndex, + juniDsx3RowStatus, + juniDsx3Ds3DsuMode, + juniDsx3Ds3BandwidthLimit, + juniDsx3Ds3DsuScrambleMode, + + juniDs3NextIfIndex } + STATUS obsolete + DESCRIPTION + "Obsolete collection of objects providing management of DS3/E3 + interfaces in a Juniper product. This group became obsolete when more + configuration objects were added." + ::= { juniDs3Groups 4 } + +juniDs3Group5 OBJECT-GROUP + OBJECTS { + juniDsx3LineLength, + juniDsx3LineType, + juniDsx3CellScramblerConfig, + juniDsx3Channelization, + juniDsx3InterfaceType, + juniDsx3Application, + juniDsx3Ds3Channel, + juniDsx3LowerIfIndex, + juniDsx3RowStatus, + juniDsx3Ds3DsuMode, + juniDsx3Ds3BandwidthLimit, + juniDsx3Ds3DsuScrambleMode, + juniDsx3MdlCarrier, + juniDsx3MdlTransmit, + juniDsx3MdlEic, + juniDsx3MdlLic, + juniDsx3MdlFic, + juniDsx3MdlUnit, + juniDsx3MdlPfi, + juniDsx3MdlPort, + juniDsx3MdlGenerator, + + juniDs3NextIfIndex } + STATUS current + DESCRIPTION + "A collection of objects providing management of DS3/E3 interfaces in a + Juniper product." + ::= { juniDs3Groups 5 } + +juniDs3FarEndGroup OBJECT-GROUP + OBJECTS { + juniDsx3FarEndCurrentInvalidSeconds, + juniDsx3FarEndIntervalInvalidSeconds, + juniDsx3FarEndTotalInvalidSeconds } + STATUS obsolete + DESCRIPTION + "Obsolete collection of objects providing remote statistics information + applicable to DS3 interfaces in a Juniper product. This group became + obsolete when remote port number, generator number and carrier objects + were added." + ::= { juniDs3Groups 6 } + +juniDs3FarEndGroup2 OBJECT-GROUP + OBJECTS { + juniDsx3FarEndCurrentInvalidSeconds, + juniDsx3FarEndIntervalInvalidSeconds, + juniDsx3FarEndTotalInvalidSeconds, + juniDsx3FarEndPortNumber, + juniDsx3FarEndGeneratorNumber, + juniDsx3FarEndCarrier } + STATUS current + DESCRIPTION + "A collection of objects providing remote statistics information + applicable to DS3 interfaces in a Juniper product." + ::= { juniDs3Groups 7 } + +END |