diff options
Diffstat (limited to 'MIBS/junos/JUNIPER-SP-MIB')
| -rw-r--r-- | MIBS/junos/JUNIPER-SP-MIB | 982 |
1 files changed, 982 insertions, 0 deletions
diff --git a/MIBS/junos/JUNIPER-SP-MIB b/MIBS/junos/JUNIPER-SP-MIB new file mode 100644 index 0000000..7f8456a --- /dev/null +++ b/MIBS/junos/JUNIPER-SP-MIB @@ -0,0 +1,982 @@ +-- +-- Juniper Enterprise Specific MIB: Service PIC MIB +-- +-- Copyright (c) 2003-2013, Juniper Networks, Inc. +-- All rights reserved. +-- +-- The contents of this document are subject to change without notice. +-- + +JUNIPER-SP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Integer32, + NOTIFICATION-TYPE, OBJECT-IDENTITY + FROM SNMPv2-SMI + DisplayString + FROM SNMPv2-TC + ifIndex, InterfaceIndex + FROM IF-MIB + CounterBasedGauge64 + FROM HCNUM-TC + jnxMibs, jnxSpNotifications + FROM JUNIPER-SMI; + +jnxSpMIB MODULE-IDENTITY + LAST-UPDATED "201909190000Z" -- Thu Sept 19 00:00:00 2019 UTC + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Technical Assistance Center + Juniper Networks, Inc. + 1133 Innovation Way + Sunnyvale, CA 94089 + E-mail: support@juniper.net" + + DESCRIPTION + "Provides data about each of the AS Pics on a router." + + -- revision history + REVISION "200504020000Z" + DESCRIPTION + "Initial revision." + REVISION "201302230000Z" --Feb 23, 2013 + DESCRIPTION + "Added OID jnxSpSvcSetFlowLimitUtilised under jnxSpNotificationPrefix + Depreated OID jnxSpSvcSetFlowLimitUtilized ." + + REVISION "201605310000Z" -- 31-May-16 + DESCRIPTION + "Removed duplicate entries" + + REVISION "201810220000Z" -- 22-Oct-18 + DESCRIPTION + "Added OID jnxSpTcpLoggingHostStatus under jnxSpNotificationPrefix" + + REVISION "201908100000Z" -- 10-Aug-19 + DESCRIPTION + "Added OIDs jnxSpSvcSetMemoryUsage64, jnxSpSvcSetMemLimitPktDrops64, + jnxSpSvcSetCpuLimitPktDrops64, jnxSpSvcSetFlowLimitPktDrops64 + under JnxSpSvcSetEntry. " + + REVISION "201909190000Z" -- 19-Sept-19 + DESCRIPTION + "Added OID jnxSpSvcSetSessCount under JnxSpSvcSetEntry. + Added new OIDs under JnxSpSvcSetIfEntry." + + ::= { jnxMibs 32 } + + jnxFlowLimitTrapVars OBJECT IDENTIFIER ::= { jnxSpMIB 2 } + jnxTcpLoggingTrapVars OBJECT IDENTIFIER ::= { jnxSpMIB 3 } + +-- +-- Per Service Set information +-- + + jnxSpSvcSet OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Information about Service PIC Service Sets." + ::= { jnxSpMIB 1 } + + jnxSpSvcSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxSpSvcSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Data about each service set on each Service PIC on the router." + ::= { jnxSpSvcSet 1 } + + jnxSpSvcSetEntry OBJECT-TYPE + SYNTAX JnxSpSvcSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry provides information about a single Service Set. + The Service Set is identified by its name and the Service PIC the + Service Set is configured on is identified by jnxSpSvcSetIfName." + INDEX { jnxSpSvcSetName } + ::= { jnxSpSvcSetTable 1 } + + JnxSpSvcSetEntry ::= + SEQUENCE { + jnxSpSvcSetName DisplayString, + jnxSpSvcSetSvcType DisplayString, + jnxSpSvcSetTypeIndex Integer32, + jnxSpSvcSetIfName DisplayString, + jnxSpSvcSetIfIndex InterfaceIndex, + jnxSpSvcSetMemoryUsage Gauge32, + jnxSpSvcSetCpuUtil Gauge32, + jnxSpSvcSetSvcStyle INTEGER, + jnxSpSvcSetMemLimitPktDrops Counter32, + jnxSpSvcSetCpuLimitPktDrops Counter32, + jnxSpSvcSetFlowLimitPktDrops Counter32, + jnxSpSvcSetMemoryUsage64 CounterBasedGauge64, + jnxSpSvcSetMemLimitPktDrops64 CounterBasedGauge64, + jnxSpSvcSetCpuLimitPktDrops64 CounterBasedGauge64, + jnxSpSvcSetFlowLimitPktDrops64 CounterBasedGauge64, + jnxSpSvcSetSessCount Counter32 + } + + jnxSpSvcSetName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..96)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Service Set name." + ::= { jnxSpSvcSetEntry 1 } + + jnxSpSvcSetSvcType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the Service Type associated with this table entry." + ::= { jnxSpSvcSetEntry 2 } + + jnxSpSvcSetTypeIndex OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A generic integer used to identify the Service Type for this + entry." + ::= { jnxSpSvcSetEntry 3 } + + jnxSpSvcSetIfName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifName of the interface identifying the Service PIC. + If more than one interface is associated with the Service PIC, + the name associated with the lowest layer interface is used for + this object." + ::= { jnxSpSvcSetEntry 4 } + + jnxSpSvcSetIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex corresponding to jnxSpSvcSetIfName." + ::= { jnxSpSvcSetEntry 5 } + + jnxSpSvcSetMemoryUsage OBJECT-TYPE + SYNTAX Gauge32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of memory used by this Service Set, expressed in bytes." + ::= { jnxSpSvcSetEntry 6 } + + jnxSpSvcSetCpuUtil OBJECT-TYPE + SYNTAX Gauge32 + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of CPU used by this Service Set, expressed as a + percentage of the total." + ::= { jnxSpSvcSetEntry 7 } + + jnxSpSvcSetSvcStyle OBJECT-TYPE + SYNTAX INTEGER { + unknown (1), + interface-service (2), + next-hop-service (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of this Service Set. The definitions of each style + being: + + Unknown - Service style is not known. + Interface-service - Service style is interface based. + Next-hop-service - Service style is next-hop based." + ::= { jnxSpSvcSetEntry 8 } + + jnxSpSvcSetMemLimitPktDrops OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets dropped due to the Service Set exceeding + its memory limits (when in Red Zone)." + ::= { jnxSpSvcSetEntry 9 } + + jnxSpSvcSetCpuLimitPktDrops OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets dropped due to the Service Set exceeding + the average cpu limits (when total exceeds 85%)." + ::= { jnxSpSvcSetEntry 10 } + + jnxSpSvcSetFlowLimitPktDrops OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets dropped due to the Service Set exceeding + the flow limit." + ::= { jnxSpSvcSetEntry 11 } + + jnxSpSvcSetMemoryUsage64 OBJECT-TYPE + SYNTAX CounterBasedGauge64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of memory used by this Service Set, expressed in + bytes, represented by 64 bit integer." + ::= { jnxSpSvcSetEntry 12 } + + jnxSpSvcSetMemLimitPktDrops64 OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets dropped due to the Service Set exceeding + its memory limits (when in Red Zone), + represented by 64 bit integer." + ::= { jnxSpSvcSetEntry 13 } + + jnxSpSvcSetCpuLimitPktDrops64 OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets dropped due to the Service Set exceeding + the average cpu limits (when total exceeds 85%), + represented by 64 bit integer." + ::= { jnxSpSvcSetEntry 14 } + + jnxSpSvcSetFlowLimitPktDrops64 OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets dropped due to the Service Set exceeding + the flow limit, represented by 64 bit integer." + ::= { jnxSpSvcSetEntry 15 } + + jnxSpSvcSetSessCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of sessions active in the Service Set." + ::= { jnxSpSvcSetEntry 16 } + + +-- +-- Per Service information +-- + + jnxSpSvcSetSvcTypeTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxSpSvcSetSvcTypeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Data about each service on each Service PIC on the router." + ::= { jnxSpSvcSet 2 } + + jnxSpSvcSetSvcTypeEntry OBJECT-TYPE + SYNTAX JnxSpSvcSetSvcTypeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry provides information about a single Service on + each Service PIC. Each Service PIC is identified by its + corresponding ifIndex, while each Service is identified by + jnxSpSvcSetSvcTypeIndex. The Service Type associated with + this index is provided by jnxSpSvcSetSvcTypeName." + INDEX { ifIndex, jnxSpSvcSetSvcTypeIndex } + ::= { jnxSpSvcSetSvcTypeTable 1 } + + JnxSpSvcSetSvcTypeEntry ::= + SEQUENCE { + jnxSpSvcSetSvcTypeIndex Integer32, + jnxSpSvcSetSvcTypeIfName DisplayString, + jnxSpSvcSetSvcTypeName DisplayString, + jnxSpSvcSetSvcTypeSvcSets Gauge32, + jnxSpSvcSetSvcTypeMemoryUsage Gauge32, + jnxSpSvcSetSvcTypePctMemoryUsage Gauge32, + jnxSpSvcSetSvcTypeCpuUtil Gauge32, + jnxSpSvcSetSvcTypeMemoryUsage64 CounterBasedGauge64 + } + + jnxSpSvcSetSvcTypeIndex OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A generic integer used to identify the Service Type for this + entry." + ::= { jnxSpSvcSetSvcTypeEntry 1 } + + jnxSpSvcSetSvcTypeIfName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifName of the interface identifying the Service PIC. If + more than one interface is associated with the Service PIC, the + name associated with the lowest layer interface is used for this + object." + ::= { jnxSpSvcSetSvcTypeEntry 2 } + + jnxSpSvcSetSvcTypeName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the Service Type associated with this table entry." + ::= { jnxSpSvcSetSvcTypeEntry 3 } + + jnxSpSvcSetSvcTypeSvcSets OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Service Sets configured on this Service PIC that + use this service type." + ::= { jnxSpSvcSetSvcTypeEntry 4 } + + jnxSpSvcSetSvcTypeMemoryUsage OBJECT-TYPE + SYNTAX Gauge32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of memory used by this Service Type, expressed in + bytes." + ::= { jnxSpSvcSetSvcTypeEntry 5 } + + jnxSpSvcSetSvcTypePctMemoryUsage OBJECT-TYPE + SYNTAX Gauge32 + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of memory used by this Service Type, expressed as a + percentage of the total." + ::= { jnxSpSvcSetSvcTypeEntry 6 } + + jnxSpSvcSetSvcTypeCpuUtil OBJECT-TYPE + SYNTAX Gauge32 + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of CPU used by this Service Type, expressed as a + percentage of the total." + ::= { jnxSpSvcSetSvcTypeEntry 7 } + + jnxSpSvcSetSvcTypeMemoryUsage64 OBJECT-TYPE + SYNTAX CounterBasedGauge64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of memory used by this Service Type, expressed in + bytes, represented by 64 bit integer." + ::= { jnxSpSvcSetSvcTypeEntry 8 } + +-- +-- Per Interface information +-- + + jnxSpSvcSetIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxSpSvcSetIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Service Set data about each Service PIC on the router." + ::= { jnxSpSvcSet 3 } + + jnxSpSvcSetIfEntry OBJECT-TYPE + SYNTAX JnxSpSvcSetIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry provides Service Set information about a single + Service PIC. Each Service PIC is identified by its corresponding + ifIndex." + INDEX { ifIndex } + ::= { jnxSpSvcSetIfTable 1 } + + JnxSpSvcSetIfEntry ::= + SEQUENCE { + jnxSpSvcSetIfTableName DisplayString, + jnxSpSvcSetIfSvcSets Gauge32, + jnxSpSvcSetIfMemoryUsage Gauge32, + jnxSpSvcSetIfPctMemoryUsage Gauge32, + jnxSpSvcSetIfPolMemoryUsage Gauge32, + jnxSpSvcSetIfPctPolMemoryUsage Gauge32, + jnxSpSvcSetIfMemoryZone INTEGER, + jnxSpSvcSetIfCpuUtil Gauge32, + jnxSpSvcSetIfMemoryUsage64 CounterBasedGauge64, + jnxSpSvcSetIfPolMemoryUsage64 CounterBasedGauge64, + jnxSpSvcSetIfNumTotalSessActive Integer32, + jnxSpSvcSetIfPeakTotalSessActive Integer32, + jnxSpSvcSetIfNumCreatedSessPerSec Integer32, + jnxSpSvcSetIfNumDeletedSessPerSec Integer32, + jnxSpSvcSetIfNumTotalTcpSessActive Integer32, + jnxSpSvcSetIfNumTotalUdpSessActive Integer32, + jnxSpSvcSetIfNumTotalOtherSessActive Integer32, + jnxSpSvcSetIfPeakTotalTcpSessActive Integer32, + jnxSpSvcSetIfPeakTotalUdpSessActive Integer32, + jnxSpSvcSetIfPeakTotalOtherSessActive Integer32, + jnxSpSvcSetIfPeakCreatedSessPerSec Integer32, + jnxSpSvcSetIfPeakDeletedSessPerSec Integer32, + jnxSpSvcSetIfNumTotalTcpIpv4SessActive Integer32, + jnxSpSvcSetIfNumTotalTcpIpv6SessActive Integer32, + jnxSpSvcSetIfNumTotalUdpIpv4SessActive Integer32, + jnxSpSvcSetIfNumTotalUdpIpv6SessActive Integer32, + jnxSpSvcSetIfNumTotalOtherIpv4SessActive Integer32, + jnxSpSvcSetIfNumTotalOtherIpv6SessActive Integer32, + jnxSpSvcSetIfNumTotalTcpGatedSessActive Integer32, + jnxSpSvcSetIfNumTotalUdpGatedSessActive Integer32, + jnxSpSvcSetIfNumTotalTcpRegSessActive Integer32, + jnxSpSvcSetIfNumTotalUdpRegSessActive Integer32, + jnxSpSvcSetIfNumTotalTcpTunSessActive Integer32, + jnxSpSvcSetIfNumTotalUdpTunSessActive Integer32, + jnxSpSvcSetIfSessPktRecv CounterBasedGauge64, + jnxSpSvcSetIfSessPktXmit CounterBasedGauge64, + jnxSpSvcSetIfSessSlowPathDiscard CounterBasedGauge64, + jnxSpSvcSetIfSessSlowPathForward CounterBasedGauge64, + jnxSpSvcSetIfMspNumCreatedSubsPerSec Integer32, + jnxSpSvcSetIfMspNumDeletedSubsPerSec Integer32, + jnxSpSvcSetIfMspNumTotalSubsActive Integer32, + jnxSpSvcSetIfMspPeakCreatedSubsPerSec Integer32, + jnxSpSvcSetIfMspPeakDeletedSubsPerSec Integer32, + jnxSpSvcSetIfMspPeakTotalSubsActive Integer32 + } + + jnxSpSvcSetIfTableName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifName of the interface identifying the Service PIC. If more + than one interface is associated with the Service PIC, the name + associated with the lowest layer interface is used for this object." + ::= { jnxSpSvcSetIfEntry 1 } + + jnxSpSvcSetIfSvcSets OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Service Sets configured on this Service PIC." + ::= { jnxSpSvcSetIfEntry 2 } + + jnxSpSvcSetIfMemoryUsage OBJECT-TYPE + SYNTAX Gauge32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of memory used by this Service PIC, expressed in + bytes." + ::= { jnxSpSvcSetIfEntry 3 } + + jnxSpSvcSetIfPctMemoryUsage OBJECT-TYPE + SYNTAX Gauge32 + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of memory used by this Service PIC, expressed as a + percentage of the total." + ::= { jnxSpSvcSetIfEntry 4 } + + jnxSpSvcSetIfPolMemoryUsage OBJECT-TYPE + SYNTAX Gauge32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of policy memory used by this Service PIC, expressed in + bytes." + ::= { jnxSpSvcSetIfEntry 5 } + + jnxSpSvcSetIfPctPolMemoryUsage OBJECT-TYPE + SYNTAX Gauge32 + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of policy memory used by this Service PIC, expressed + as a percentage of the total." + ::= { jnxSpSvcSetIfEntry 6 } + + jnxSpSvcSetIfMemoryZone OBJECT-TYPE + SYNTAX INTEGER { + green (1), + yellow (2), + orange (3), + red (4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The memory-usage zone currently occupied by this Service PIC. The + definitions of each zone are: + + Green - All new flows are allowed. + Yellow - Unused memory is reclaimed. All new flows are allowed. + Orange - New flows are only allowed for service sets that are + using less than their equal share of memory. + Red - No new flows are allowed." + ::= { jnxSpSvcSetIfEntry 7 } + + + jnxSpSvcSetIfCpuUtil OBJECT-TYPE + SYNTAX Gauge32 + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of CPU used by this Service PIC, expressed as a + percentage of the total." + ::= { jnxSpSvcSetIfEntry 8 } + + jnxSpSvcSetIfMemoryUsage64 OBJECT-TYPE + SYNTAX CounterBasedGauge64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of memory used by this Service PIC, expressed in + bytes, represented by 64 bit integer." + ::= { jnxSpSvcSetIfEntry 9 } + + jnxSpSvcSetIfPolMemoryUsage64 OBJECT-TYPE + SYNTAX CounterBasedGauge64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of policy memory used by this Service PIC, expressed in + bytes, represented by 64 bit integer." + ::= { jnxSpSvcSetIfEntry 10 } + + jnxSpSvcSetIfNumTotalSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 11 } + + jnxSpSvcSetIfPeakTotalSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Peak number of sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 12 } + + jnxSpSvcSetIfNumCreatedSessPerSec OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of sessions created per second in the Service PIC." + ::= { jnxSpSvcSetIfEntry 13 } + + jnxSpSvcSetIfNumDeletedSessPerSec OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of sessions deleted per second in the Service PIC." + ::= { jnxSpSvcSetIfEntry 14 } + + jnxSpSvcSetIfNumTotalTcpSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of TCP sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 15 } + + jnxSpSvcSetIfNumTotalUdpSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 16 } + + jnxSpSvcSetIfNumTotalOtherSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of other (not TCP or UDP) sessions active + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 17 } + + jnxSpSvcSetIfPeakTotalTcpSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peak number of TCP sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 18 } + + jnxSpSvcSetIfPeakTotalUdpSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peak number of UDP sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 19 } + + jnxSpSvcSetIfPeakTotalOtherSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peak number of other (not TCP or UDP) sessions active + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 20 } + + jnxSpSvcSetIfPeakCreatedSessPerSec OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peak number of sessions created per second in the Service PIC." + ::= { jnxSpSvcSetIfEntry 21 } + + jnxSpSvcSetIfPeakDeletedSessPerSec OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peak number of sessions deleted per second in the Service PIC." + ::= { jnxSpSvcSetIfEntry 22 } + + jnxSpSvcSetIfNumTotalTcpIpv4SessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv4 TCP sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 23 } + + jnxSpSvcSetIfNumTotalTcpIpv6SessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 TCP sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 24 } + + jnxSpSvcSetIfNumTotalUdpIpv4SessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv4 UDP sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 25 } + + jnxSpSvcSetIfNumTotalUdpIpv6SessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 UDP sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 26 } + + jnxSpSvcSetIfNumTotalOtherIpv4SessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of other IPv4 sessions (not TCP or UDP) active + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 27 } + + jnxSpSvcSetIfNumTotalOtherIpv6SessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of other IPv6 sessions (not TCP or UDP) active + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 28 } + + jnxSpSvcSetIfNumTotalTcpGatedSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of TCP gated sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 29 } + + jnxSpSvcSetIfNumTotalUdpGatedSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP gated sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 30 } + + jnxSpSvcSetIfNumTotalTcpRegSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of TCP regular sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 31 } + + jnxSpSvcSetIfNumTotalUdpRegSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP regular sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 32 } + + jnxSpSvcSetIfNumTotalTcpTunSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of TCP tunneled sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 33 } + + jnxSpSvcSetIfNumTotalUdpTunSessActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP tunneled sessions active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 34 } + + jnxSpSvcSetIfSessPktRecv OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of session packets received in the Service PIC." + ::= { jnxSpSvcSetIfEntry 35 } + + + jnxSpSvcSetIfSessPktXmit OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of session packets transmitted in the Service PIC." + ::= { jnxSpSvcSetIfEntry 36 } + + jnxSpSvcSetIfSessSlowPathDiscard OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of session packets discarded in the slow path + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 37 } + + jnxSpSvcSetIfSessSlowPathForward OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of session packets forwarded in the slow path + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 38 } + + jnxSpSvcSetIfMspNumCreatedSubsPerSec OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of subscribers created per second + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 39 } + + jnxSpSvcSetIfMspNumDeletedSubsPerSec OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of subscribers deleted per second + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 40 } + + jnxSpSvcSetIfMspNumTotalSubsActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of subscribers active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 41 } + + jnxSpSvcSetIfMspPeakCreatedSubsPerSec OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peak number of subscribers created per second + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 42 } + + jnxSpSvcSetIfMspPeakDeletedSubsPerSec OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peak number of subscribers deleted per second + in the Service PIC." + ::= { jnxSpSvcSetIfEntry 43 } + + jnxSpSvcSetIfMspPeakTotalSubsActive OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The peak total number of subscribers active in the Service PIC." + ::= { jnxSpSvcSetIfEntry 44 } + + +-- +-- +-- Service PIC Notification definitions +-- + jnxSpNotificationPrefix OBJECT-IDENTITY + STATUS current + DESCRIPTION + "All collector notifications are registered under this branch." + ::= { jnxSpNotifications 0 } + + + jnxSpSvcSetZoneEntered NOTIFICATION-TYPE + OBJECTS { jnxSpSvcSetIfMemoryZone, + jnxSpSvcSetIfTableName } + STATUS current + DESCRIPTION + "This indicates a Service PIC has entered a more severe memory-usage + zone from a less severe memory usage zone. The zone entered + is identified by jnxSpSvcSetIfMemoryZone." + ::= { jnxSpNotificationPrefix 1 } + + jnxSpSvcSetZoneExited NOTIFICATION-TYPE + OBJECTS { jnxSpSvcSetIfMemoryZone, + jnxSpSvcSetIfTableName } + STATUS current + DESCRIPTION + "This indicates a Service Pic has exited a more severe memory-usage + zone to a less severe memory usage zone. The zone exited is + identified by jnxSpSvcSetIfMemoryZone." + ::= { jnxSpNotificationPrefix 2 } + + jnxSpSvcSetCpuExceeded NOTIFICATION-TYPE + OBJECTS { jnxSpSvcSetIfCpuUtil, + jnxSpSvcSetIfTableName } + STATUS current + DESCRIPTION + "This indicates a Service Pic has exceeded its internal threshold + for CPU utilization (85%)." + ::= { jnxSpNotificationPrefix 3 } + + jnxSpSvcSetCpuOk NOTIFICATION-TYPE + OBJECTS { jnxSpSvcSetIfCpuUtil, + jnxSpSvcSetIfTableName } + STATUS current + DESCRIPTION + "This indicates a Service Pic has crossed below its internal + threshold for CPU utilization (85%)." + ::= { jnxSpNotificationPrefix 4 } + + jnxSpSvcSetFlowLimitUtil OBJECT-TYPE + SYNTAX Integer32 (0..100) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The Total no of flows present in this Service Set, expressed as a + percentage of the total maximum flows." + ::= { jnxFlowLimitTrapVars 1 } + + jnxSpSvcSetNameUtil OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..96)) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The Service Set name." + ::= { jnxFlowLimitTrapVars 2 } + + jnxSpTcpLoggingHostIpaddr OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..64)) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The TCP logging remote host server IP address." + ::= { jnxTcpLoggingTrapVars 1 } + + jnxSpTcpLoggingHostPort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The TCP logging remote host server port number." + ::= { jnxTcpLoggingTrapVars 2 } + + jnxSpTcpLoggingHostConnStatus OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..64)) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The TCP logging remote host server connection status. + Status can be either <connection established> or + <connection dropped>" + ::= { jnxTcpLoggingTrapVars 3 } + + jnxSpTcpLoggingHostRoutingInstance OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..64)) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The routing instance name under which TCP logging + remote host server is configured." + ::= { jnxTcpLoggingTrapVars 4 } + + jnxSpSvcSetFlowLimitUtilized NOTIFICATION-TYPE + OBJECTS {jnxSpSvcSetFlowLimitUtil, + jnxSpSvcSetNameUtil} + STATUS deprecated + DESCRIPTION + "This indicates a Service Set has reached its upper limit of flows + threshold of a maximun flows allowed for a service set." + ::= { jnxSpNotifications 1 } + + jnxSpSvcSetFlowLimitUtilised NOTIFICATION-TYPE + OBJECTS {jnxSpSvcSetFlowLimitUtil, + jnxSpSvcSetNameUtil} + STATUS current + DESCRIPTION + "This indicates a Service Set has reached its upper limit of flows + threshold of a maximun flows allowed for a service set." + ::= { jnxSpNotificationPrefix 5 } + + jnxSpTcpLoggingHostStatus NOTIFICATION-TYPE + OBJECTS {jnxSpTcpLoggingHostIpaddr, + jnxSpTcpLoggingHostPort, + jnxSpTcpLoggingHostConnStatus, + jnxSpTcpLoggingHostRoutingInstance} + STATUS current + DESCRIPTION + "This provides TCP logging host connection status for Service Set." + ::= { jnxSpNotificationPrefix 6 } + +END |