diff options
Diffstat (limited to 'MIBS/junos/JUNIPER-PMon-MIB')
| -rw-r--r-- | MIBS/junos/JUNIPER-PMon-MIB | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/MIBS/junos/JUNIPER-PMon-MIB b/MIBS/junos/JUNIPER-PMon-MIB new file mode 100644 index 0000000..48eab28 --- /dev/null +++ b/MIBS/junos/JUNIPER-PMon-MIB @@ -0,0 +1,453 @@ +-- +-- Juniper Enterprise Specific MIB: Passive Monitoring MIB +-- +-- Copyright (c) 2002-2003, 2006, Juniper Networks, Inc. +-- All rights reserved. +-- +-- The contents of this document are subject to change without notice. +-- + +JUNIPER-PMon-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter64, Counter32, Gauge32, TimeTicks, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + DateAndTime, TEXTUAL-CONVENTION + FROM SNMPv2-TC + ifIndex, ifDescr + FROM IF-MIB + jnxMibs, jnxPMonNotifications + FROM JUNIPER-SMI; + +jnxPMon MODULE-IDENTITY + LAST-UPDATED "200307182153Z" -- Fri Jul 18 21:53:57 2003 UTC + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Technical Assistance Center + Juniper Networks, Inc. + 1133 Innovation Way + Sunnyvale, CA 94089 + E-mail: support@juniper.net" + + DESCRIPTION + "This is Juniper Networks' implementation of enterprise + specific MIB for Passive Monitoring PIC" + + -- revision history + REVISION "200206050000Z" -- 5 June, 2002 + DESCRIPTION + "Added Passive Monitoring PIC stats." + + REVISION "200208270000Z" -- 27 August, 2002 + DESCRIPTION + "jnxPMonCurrentActiveFlows, jnxPMonTenSecondAvyyerageFlowPackets, + jnxPMonTenSecondAverageFlowBytes, jnxPMonAllocPerSecond, + jnxPMonFreePerSecond, jnxPMonTotalMemoryUsed, + jnxPMonTotalMemoryFree: change type Counter32 to Gauge32" + + REVISION "200209090000Z" -- 9 Sept, 2002 + DESCRIPTION + "Added overload notifications and objects to jnxPMonErrorTable." + + ::= { jnxMibs 19 } + +JnxPMonOverloadId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Identifies specific overload conditions that may exist on an + interface." + SYNTAX BITS { + pmonMemOverload(0), -- Memory overload + pmonPpsOverload(1), -- Packets per second overload + pmonBpsOverload(2), -- Bits per second overload + pmonMemWarning(3) -- Memory warning + } + +-- Passive Monitoring Flow Table + +-- Passive Monitoring Flow Table contains flow information on the entity's +-- management PIC. + + jnxPMonFlowTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxPMonFlowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "a list of flow entry for Passive Monitoring PIC" + ::= { jnxPMon 1 } + + jnxPMonFlowEntry OBJECT-TYPE + SYNTAX JnxPMonFlowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing management information applicable to a + particular monitor interfaces." + INDEX { ifIndex } + ::= { jnxPMonFlowTable 1 } + + JnxPMonFlowEntry ::= + SEQUENCE { + jnxPMonCurrentActiveFlows Gauge32, + jnxPMonTotalFlows Counter32, + jnxPMonTotalFlowsPackets Counter64, + jnxPMonTenSecondAverageFlowPackets Gauge32, + jnxPMonTotalFlowsBytes Counter64, + jnxPMonTenSecondAverageFlowBytes Gauge32, + jnxPMonTotalFlowsExpired Counter32, + jnxPMonTotalFlowsAged Counter32, + jnxPMonTotalFlowsExported Counter32, + jnxPMonTotalFlowsPacketsExported Counter32 + } + + jnxPMonCurrentActiveFlows OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flows currently active." + ::= { jnxPMonFlowEntry 1 } + + jnxPMonTotalFlows OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The cumulative number of total flows." + ::= { jnxPMonFlowEntry 2 } + + jnxPMonTotalFlowsPackets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of total flows packets." + ::= { jnxPMonFlowEntry 3 } + + jnxPMonTenSecondAverageFlowPackets OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flow packets per second in 10 second average." + ::= { jnxPMonFlowEntry 4 } + + jnxPMonTotalFlowsBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of total flows bytes." + ::= { jnxPMonFlowEntry 5 } + + jnxPMonTenSecondAverageFlowBytes OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flow bytes per second in 10 second average." + ::= { jnxPMonFlowEntry 6 } + + jnxPMonTotalFlowsExpired OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The cumulative number of total flows expired." + ::= { jnxPMonFlowEntry 7 } + + jnxPMonTotalFlowsAged OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The cumulative number of total flows aged." + ::= { jnxPMonFlowEntry 8 } + + jnxPMonTotalFlowsExported OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The cumulative number of total flows exported." + ::= { jnxPMonFlowEntry 9 } + + jnxPMonTotalFlowsPacketsExported OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The cumulative number of total flows packets exported." + ::= { jnxPMonFlowEntry 10 } + +-- Passive Monitoring Error Table + +-- Passive Monitoring Error Table contains error information on the entity's +-- management PIC. + + jnxPMonErrorTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxPMonErrorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "a list of error entry for Passive Monitoring PIC" + ::= { jnxPMon 2 } + + jnxPMonErrorEntry OBJECT-TYPE + SYNTAX JnxPMonErrorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing management information applicable to a + particular monitor interfaces." + INDEX { ifIndex } + ::= { jnxPMonErrorTable 1 } + + JnxPMonErrorEntry ::= + SEQUENCE { +-- memory error stats + jnxPMonFlowAllocFailures Counter32, + jnxPMonFlowFreeFailures Counter32, + jnxPMonFreeListFailures Counter32, +-- packet drop error stats + jnxPMonNoMemDrops Counter64, + jnxPMonNotIPDrops Counter64, + jnxPMonNotIPv4Drops Counter64, + jnxPMonTooSmallDrops Counter64, +-- overload data + jnxPMonCurrentOverload JnxPMonOverloadId, + jnxPMonLastOverload JnxPMonOverloadId, + jnxPMonLastOverloadTime TimeTicks, + jnxPMonLastOverloadDate DateAndTime, + jnxPMonLastOverloadEvent INTEGER + } + + jnxPMonFlowAllocFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flow allocation failures." + ::= { jnxPMonErrorEntry 1 } + + jnxPMonFlowFreeFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flow free failures." + ::= { jnxPMonErrorEntry 2 } + + jnxPMonFreeListFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of free list failures." + ::= { jnxPMonErrorEntry 3 } + + jnxPMonNoMemDrops OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packet drops due to low/no memory." + ::= { jnxPMonErrorEntry 4 } + + jnxPMonNotIPDrops OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packet drops due to not IP." + ::= { jnxPMonErrorEntry 5 } + + jnxPMonNotIPv4Drops OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packet drops due to not IPv4." + ::= { jnxPMonErrorEntry 6 } + + jnxPMonTooSmallDrops OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packet drops due to too small on header." + ::= { jnxPMonErrorEntry 7 } + + jnxPMonCurrentOverload OBJECT-TYPE + SYNTAX JnxPMonOverloadId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Identifies current overload conditions that exist on this + interface." + ::= { jnxPMonErrorEntry 8 } + + jnxPMonLastOverload OBJECT-TYPE + SYNTAX JnxPMonOverloadId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Identifies the last overload condition to change on this + interface." + ::= { jnxPMonErrorEntry 9 } + + jnxPMonLastOverloadTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the management subsystem last + learned of a change to the overload condition on this + interface." + ::= { jnxPMonErrorEntry 10 } + + jnxPMonLastOverloadDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The system date and time when the management subsystem last + learned of a change to the overload condition on this + interface." + ::= { jnxPMonErrorEntry 11 } + + jnxPMonLastOverloadEvent OBJECT-TYPE + SYNTAX INTEGER { + none (1), + set (2), + cleared (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates whether the last overload event set a new + overload condition or cleared an existing condition." + ::= { jnxPMonErrorEntry 12 } + + +-- Passive Monitoring Memory Table + +-- Passive Monitoring Memory Table contains memory information on the entity's +-- management PIC. + + jnxPMonMemoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxPMonMemoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "a list of memory entry for Passive Monitoring PIC" + ::= { jnxPMon 3 } + + + jnxPMonMemoryEntry OBJECT-TYPE + SYNTAX JnxPMonMemoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing management information applicable to a + particular monitor interfaces." + INDEX { ifIndex } + ::= { jnxPMonMemoryTable 1 } + + JnxPMonMemoryEntry ::= + SEQUENCE { + jnxPMonFlowTotalAlloc Counter64, + jnxPMonFlowTotalFree Counter64, + jnxPMonFlowMaxAlloc Counter64, + jnxPMonAllocPerSecond Gauge32, + jnxPMonFreePerSecond Gauge32, + jnxPMonTotalMemoryUsed Gauge32, + jnxPMonTotalMemoryFree Gauge32 + } + + jnxPMonFlowTotalAlloc OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flow records allocated." + ::= { jnxPMonMemoryEntry 1 } + + jnxPMonFlowTotalFree OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flow records freed." + ::= { jnxPMonMemoryEntry 2 } + + jnxPMonFlowMaxAlloc OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of maximum flow records allocated." + ::= { jnxPMonMemoryEntry 3 } + + jnxPMonAllocPerSecond OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flow records allocated per second." + ::= { jnxPMonMemoryEntry 4 } + + jnxPMonFreePerSecond OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flow records freed per second." + ::= { jnxPMonMemoryEntry 5 } + + jnxPMonTotalMemoryUsed OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of memory currently used in KBbytes." + ::= { jnxPMonMemoryEntry 6 } + + jnxPMonTotalMemoryFree OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of memory currently freed in KBbytes." + ::= { jnxPMonMemoryEntry 7 } + +-- +-- Passive Monitoring Notifications +-- + +jnxPMonNotificationPrefix OBJECT IDENTIFIER ::= { jnxPMonNotifications 0 } + +jnxPMonOverloadSet NOTIFICATION-TYPE + OBJECTS { ifDescr, + jnxPMonLastOverload, + jnxPMonCurrentOverload, + jnxPMonLastOverloadDate } + STATUS current + DESCRIPTION + "Notification of a new overload condition on a Passive + Monitoring interface." + ::= { jnxPMonNotificationPrefix 1 } + +jnxPMonOverloadCleared NOTIFICATION-TYPE + OBJECTS { ifDescr, + jnxPMonLastOverload, + jnxPMonCurrentOverload, + jnxPMonLastOverloadDate } + STATUS current + DESCRIPTION + "Notification of a cleared overload condition on a Passive + Monitoring interface." + ::= { jnxPMonNotificationPrefix 2 } + +END |