diff options
Diffstat (limited to 'MIBS/junos/ETHER-WIS')
| -rw-r--r-- | MIBS/junos/ETHER-WIS | 628 |
1 files changed, 628 insertions, 0 deletions
diff --git a/MIBS/junos/ETHER-WIS b/MIBS/junos/ETHER-WIS new file mode 100644 index 0000000..90ad4a6 --- /dev/null +++ b/MIBS/junos/ETHER-WIS @@ -0,0 +1,628 @@ +ETHER-WIS DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Gauge32, transmission + FROM SNMPv2-SMI + ifIndex + FROM IF-MIB + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + sonetMediumStuff2, sonetSectionStuff2, + sonetLineStuff2, sonetFarEndLineStuff2, + sonetPathStuff2, sonetFarEndPathStuff2, + sonetMediumType, sonetMediumLineCoding, + sonetMediumLineType, sonetMediumCircuitIdentifier, + sonetMediumLoopbackConfig, sonetSESthresholdSet, + sonetPathCurrentWidth + FROM SONET-MIB; + +etherWisMIB MODULE-IDENTITY + LAST-UPDATED "200309190000Z" -- September 19, 2003 + ORGANIZATION "IETF Ethernet Interfaces and Hub MIB + Working Group" + CONTACT-INFO + "WG charter: + http://www.ietf.org/html.charters/hubmib-charter.html + + Mailing Lists: + General Discussion: hubmib@ietf.org <mailto:hubmib@ietf.org> + To Subscribe: hubmib-request@ietf.org <mailto:hubmib-request@ietf.org> + In Body: subscribe your_email_address + + Chair: Dan Romascanu + Postal: Avaya Inc. + Atidim Technology Park, Bldg. 3 + Tel Aviv 61131 + Israel + Tel: +972 3 645 8414 + E-mail: dromasca@avaya.com <mailto:dromasca@avaya.com> + + Editor: C. M. Heard + Postal: 600 Rainbow Dr. #141 + Mountain View, CA 94041-2542 + USA + Tel: +1 650-964-8391 + E-mail: heard@pobox.com <mailto:heard@pobox.com>" + + DESCRIPTION + "The objects in this MIB module are used in conjunction + with objects in the SONET-MIB and the MAU-MIB to manage + the Ethernet WAN Interface Sublayer (WIS). + + The following reference is used throughout this MIB module: + + [IEEE 802.3 Std] refers to: + IEEE Std 802.3, 2000 Edition: 'IEEE Standard for + Information technology - Telecommunications and + information exchange between systems - Local and + metropolitan area networks - Specific requirements - + Part 3: Carrier sense multiple access with collision + detection (CSMA/CD) access method and physical layer + specifications', as amended by IEEE Std 802.3ae-2002, + 'IEEE Standard for Carrier Sense Multiple Access with + Collision Detection (CSMA/CD) Access Method and + Physical Layer Specifications - Media Access Control + (MAC) Parameters, Physical Layer and Management + Parameters for 10 Gb/s Operation', 30 August 2002. + + Of particular interest are Clause 50, 'WAN Interface + Sublayer (WIS), type 10GBASE-W', Clause 30, '10Mb/s, + 100Mb/s, 1000Mb/s, and 10Gb/s MAC Control, and Link + Aggregation Management', and Clause 45, 'Management + Data Input/Output (MDIO) Interface'. + + Copyright (C) The Internet Society (2003). This version + of this MIB module is part of RFC 3637 </rfcs/rfc3637.html>; see the RFC + itself for full legal notices." + + REVISION "200309190000Z" -- September 19, 2003 + DESCRIPTION "Initial version, published as RFC 3637 </rfcs/rfc3637.html>." + + ::= { transmission 134 } + +-- The main sections of the module + +etherWisObjects OBJECT IDENTIFIER ::= { etherWisMIB 1 } + +etherWisObjectsPath OBJECT IDENTIFIER ::= { etherWisMIB 2 } + +etherWisConformance OBJECT IDENTIFIER ::= { etherWisMIB 3 } + +-- groups in the Ethernet WIS MIB module + +etherWisDevice OBJECT IDENTIFIER ::= { etherWisObjects 1 } + +etherWisSection OBJECT IDENTIFIER ::= { etherWisObjects 2 } + +etherWisPath OBJECT IDENTIFIER ::= { etherWisObjectsPath 1 } + +etherWisFarEndPath OBJECT IDENTIFIER ::= { etherWisObjectsPath 2 } + +-- The Device group + +-- These objects provide WIS extensions to +-- the SONET-MIB Medium Group. + +etherWisDeviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF EtherWisDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table for Ethernet WIS devices" + ::= { etherWisDevice 1 } + +etherWisDeviceEntry OBJECT-TYPE + SYNTAX EtherWisDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the Ethernet WIS device table. For each + instance of this object there MUST be a corresponding + instance of sonetMediumEntry." + INDEX { ifIndex } + ::= { etherWisDeviceTable 1 } + +EtherWisDeviceEntry ::= + SEQUENCE { + etherWisDeviceTxTestPatternMode INTEGER, + etherWisDeviceRxTestPatternMode INTEGER, + etherWisDeviceRxTestPatternErrors Gauge32 + } + +etherWisDeviceTxTestPatternMode OBJECT-TYPE + SYNTAX INTEGER { + none(1), + squareWave(2), + prbs31(3), + mixedFrequency(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable controls the transmit test pattern mode. + The value none(1) puts the the WIS transmit path into + the normal operating mode. The value squareWave(2) puts + the WIS transmit path into the square wave test pattern + mode described in [IEEE 802.3 Std.] subclause 50.3.8.1. + The value prbs31(3) puts the WIS transmit path into the + PRBS31 test pattern mode described in [IEEE 802.3 Std.] + subclause 50.3.8.2. The value mixedFrequency(4) puts the + WIS transmit path into the mixed frequency test pattern + mode described in [IEEE 802.3 Std.] subclause 50.3.8.3. + Any attempt to set this object to a value other than + none(1) when the corresponding instance of ifAdminStatus + has the value up(1) MUST be rejected with the error + inconsistentValue, and any attempt to set the corresponding + instance of ifAdminStatus to the value up(1) when an + instance of this object has a value other than none(1) + MUST be rejected with the error inconsistentValue." + REFERENCE + "[IEEE 802.3 Std.], 50.3.8, WIS test pattern generator and + checker, 45.2.2.6, 10G WIS control 2 register (2.7), and + 45.2.2.7.2, PRBS31 pattern testing ability (2.8.1)." + ::= { etherWisDeviceEntry 1 } + +etherWisDeviceRxTestPatternMode OBJECT-TYPE + SYNTAX INTEGER { + none(1), + prbs31(3), + mixedFrequency(4) + } + MAX-ACCESS read-write + STATUS current + + DESCRIPTION + "This variable controls the receive test pattern mode. + The value none(1) puts the the WIS receive path into the + normal operating mode. The value prbs31(3) puts the WIS + receive path into the PRBS31 test pattern mode described + in [IEEE 802.3 Std.] subclause 50.3.8.2. The value + mixedFrequency(4) puts the WIS receive path into the mixed + frequency test pattern mode described in [IEEE 802.3 Std.] + subclause 50.3.8.3. Any attempt to set this object to a + value other than none(1) when the corresponding instance + of ifAdminStatus has the value up(1) MUST be rejected with + the error inconsistentValue, and any attempt to set the + corresponding instance of ifAdminStatus to the value up(1) + when an instance of this object has a value other than + none(1) MUST be rejected with the error inconsistentValue." + REFERENCE + "[IEEE 802.3 Std.], 50.3.8, WIS test pattern generator and + checker, 45.2.2.6, 10G WIS control 2 register (2.7), and + 45.2.2.7.2, PRBS31 pattern testing ability (2.8.1)." + ::= { etherWisDeviceEntry 2 } + +etherWisDeviceRxTestPatternErrors OBJECT-TYPE + SYNTAX Gauge32 ( 0..65535 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object counts the number of errors detected when the + WIS receive path is operating in the PRBS31 test pattern + mode. It is reset to zero when the WIS receive path + initially enters that mode, and it increments each time + the PRBS pattern checker detects an error as described in + [IEEE 802.3 Std.] subclause 50.3.8.2 unless its value is + 65535, in which case it remains unchanged. This object is + writeable so that it may be reset upon explicit request + of a command generator application while the WIS receive + path continues to operate in PRBS31 test pattern mode." + REFERENCE + "[IEEE 802.3 Std.], 50.3.8, WIS test pattern generator and + checker, 45.2.2.7.2, PRBS31 pattern testing ability + (2.8.1), and 45.2.2.8, 10G WIS test pattern error counter + register (2.9)." + ::= { etherWisDeviceEntry 3 } + +-- The Section group + +-- These objects provide WIS extensions to +-- the SONET-MIB Section Group. + +etherWisSectionCurrentTable OBJECT-TYPE + SYNTAX SEQUENCE OF EtherWisSectionCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table for the current state of Ethernet WIS sections." + ::= { etherWisSection 1 } + +etherWisSectionCurrentEntry OBJECT-TYPE + SYNTAX EtherWisSectionCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the etherWisSectionCurrentTable. For each + instance of this object there MUST be a corresponding + instance of sonetSectionCurrentEntry." + INDEX { ifIndex } + ::= { etherWisSectionCurrentTable 1 } + +EtherWisSectionCurrentEntry ::= + SEQUENCE { + etherWisSectionCurrentJ0Transmitted OCTET STRING, + etherWisSectionCurrentJ0Received OCTET STRING + } + +etherWisSectionCurrentJ0Transmitted OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (16)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the 16-octet section trace message that + is transmitted in the J0 byte. The value SHOULD + be '89'h followed by fifteen octets of '00'h + (or some cyclic shift thereof) when the section + trace function is not used, and the implementation + SHOULD use that value (or a cyclic shift thereof) + as a default if no other value has been set." + REFERENCE + "[IEEE 802.3 Std.], 30.8.1.1.8, aJ0ValueTX." + ::= { etherWisSectionCurrentEntry 1 } + +etherWisSectionCurrentJ0Received OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the 16-octet section trace message that + was most recently received in the J0 byte." + REFERENCE + "[IEEE 802.3 Std.], 30.8.1.1.9, aJ0ValueRX." + ::= { etherWisSectionCurrentEntry 2 } + +-- The Path group + +-- These objects provide WIS extensions to +-- the SONET-MIB Path Group. + +etherWisPathCurrentTable OBJECT-TYPE + SYNTAX SEQUENCE OF EtherWisPathCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table for the current state of Ethernet WIS paths." + ::= { etherWisPath 1 } + +etherWisPathCurrentEntry OBJECT-TYPE + SYNTAX EtherWisPathCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the etherWisPathCurrentTable. For each + instance of this object there MUST be a corresponding + instance of sonetPathCurrentEntry." + INDEX { ifIndex } + ::= { etherWisPathCurrentTable 1 } + +EtherWisPathCurrentEntry ::= + SEQUENCE { + etherWisPathCurrentStatus BITS, + etherWisPathCurrentJ1Transmitted OCTET STRING, + etherWisPathCurrentJ1Received OCTET STRING + } + +etherWisPathCurrentStatus OBJECT-TYPE + SYNTAX BITS { + etherWisPathLOP(0), + etherWisPathAIS(1), + etherWisPathPLM(2), + etherWisPathLCD(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the current status of the + path payload with a bit map that can indicate multiple + defects at once. The bit positions are assigned as + follows: + + etherWisPathLOP(0) + This bit is set to indicate that an + LOP-P (Loss of Pointer - Path) defect + is being experienced. Note: when this + bit is set, sonetPathSTSLOP MUST be set + in the corresponding instance of + sonetPathCurrentStatus. + + etherWisPathAIS(1) + This bit is set to indicate that an + AIS-P (Alarm Indication Signal - Path) + defect is being experienced. Note: when + this bit is set, sonetPathSTSAIS MUST be + set in the corresponding instance of + sonetPathCurrentStatus. + + etherWisPathPLM(1) + This bit is set to indicate that a + PLM-P (Payload Label Mismatch - Path) + defect is being experienced. Note: when + this bit is set, sonetPathSignalLabelMismatch + MUST be set in the corresponding instance of + sonetPathCurrentStatus. + + etherWisPathLCD(3) + This bit is set to indicate that an + LCD-P (Loss of Codegroup Delination - Path) + defect is being experienced. Since this + defect is detected by the PCS and not by + the path layer itself, there is no + corresponding bit in sonetPathCurrentStatus." + REFERENCE + "[IEEE 802.3 Std.], 30.8.1.1.18, aPathStatus." + ::= { etherWisPathCurrentEntry 1 } + +etherWisPathCurrentJ1Transmitted OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (16)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the 16-octet path trace message that + is transmitted in the J1 byte. The value SHOULD + be '89'h followed by fifteen octets of '00'h + (or some cyclic shift thereof) when the path + trace function is not used, and the implementation + SHOULD use that value (or a cyclic shift thereof) + as a default if no other value has been set." + REFERENCE + "[IEEE 802.3 Std.], 30.8.1.1.23, aJ1ValueTX." + ::= { etherWisPathCurrentEntry 2 } + +etherWisPathCurrentJ1Received OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the 16-octet path trace message that + was most recently received in the J1 byte." + REFERENCE + "[IEEE 802.3 Std.], 30.8.1.1.24, aJ1ValueRX." + ::= { etherWisPathCurrentEntry 3 } + +-- The Far End Path group + +-- These objects provide WIS extensions to +-- the SONET-MIB Far End Path Group. + +etherWisFarEndPathCurrentTable OBJECT-TYPE + SYNTAX SEQUENCE OF EtherWisFarEndPathCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table for the current far-end state of Ethernet WIS + paths." + ::= { etherWisFarEndPath 1 } + +etherWisFarEndPathCurrentEntry OBJECT-TYPE + SYNTAX EtherWisFarEndPathCurrentEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the etherWisFarEndPathCurrentTable. For each + instance of this object there MUST be a corresponding + instance of sonetFarEndPathCurrentEntry." + INDEX { ifIndex } + ::= { etherWisFarEndPathCurrentTable 1 } + +EtherWisFarEndPathCurrentEntry ::= + SEQUENCE { + etherWisFarEndPathCurrentStatus BITS + } + +etherWisFarEndPathCurrentStatus OBJECT-TYPE + SYNTAX BITS { + etherWisFarEndPayloadDefect(0), + etherWisFarEndServerDefect(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the current status at the + far end of the path using a bit map that can indicate + multiple defects at once. The bit positions are + assigned as follows: + + etherWisFarEndPayloadDefect(0) + A far end payload defect (i.e., far end + PLM-P or LCD-P) is currently being signaled + in G1 bits 5-7. + + etherWisFarEndServerDefect(1) + A far end server defect (i.e., far end + LOP-P or AIS-P) is currently being signaled + in G1 bits 5-7. Note: when this bit is set, + sonetPathSTSRDI MUST be set in the corresponding + instance of sonetPathCurrentStatus." + REFERENCE + "[IEEE 802.3 Std.], 30.8.1.1.25, aFarEndPathStatus." + ::= { etherWisFarEndPathCurrentEntry 1 } + +-- +-- Conformance Statements +-- + +etherWisGroups OBJECT IDENTIFIER ::= { etherWisConformance 1 } + +etherWisCompliances OBJECT IDENTIFIER ::= { etherWisConformance 2 } + +-- Object Groups + +etherWisDeviceGroupBasic OBJECT-GROUP + OBJECTS { + etherWisDeviceTxTestPatternMode, + etherWisDeviceRxTestPatternMode + } + STATUS current + DESCRIPTION + "A collection of objects that support test + features required of all WIS devices." + ::= { etherWisGroups 1 } + +etherWisDeviceGroupExtra OBJECT-GROUP + OBJECTS { + etherWisDeviceRxTestPatternErrors + } + STATUS current + DESCRIPTION + "A collection of objects that support + optional WIS device test features." + ::= { etherWisGroups 2 } + +etherWisSectionGroup OBJECT-GROUP + OBJECTS { + etherWisSectionCurrentJ0Transmitted, + etherWisSectionCurrentJ0Received + } + STATUS current + DESCRIPTION + "A collection of objects that provide + required information about a WIS section." + ::= { etherWisGroups 3 } + +etherWisPathGroup OBJECT-GROUP + OBJECTS { + etherWisPathCurrentStatus, + etherWisPathCurrentJ1Transmitted, + etherWisPathCurrentJ1Received + } + STATUS current + DESCRIPTION + "A collection of objects that provide + required information about a WIS path." + ::= { etherWisGroups 4 } + +etherWisFarEndPathGroup OBJECT-GROUP + OBJECTS { + etherWisFarEndPathCurrentStatus + } + STATUS current + DESCRIPTION + "A collection of objects that provide required + information about the far end of a WIS path." + ::= { etherWisGroups 5 } + +-- Compliance Statements + +etherWisCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for interfaces that include + the Ethernet WIS. Compliance with the following + external compliance statements is prerequisite: + + MIB Module Compliance Statement + ---------- -------------------- + IF-MIB ifCompliance3 + IF-INVERTED-STACK-MIB ifInvCompliance + EtherLike-MIB dot3Compliance2 + MAU-MIB mauModIfCompl3" + + MODULE -- this module + MANDATORY-GROUPS { + etherWisDeviceGroupBasic, + etherWisSectionGroup, + etherWisPathGroup, + etherWisFarEndPathGroup + } + + OBJECT etherWisDeviceTxTestPatternMode + SYNTAX INTEGER { + none(1), + squareWave(2), + mixedFrequency(4) + } + DESCRIPTION + "Support for values other than none(1), + squareWave(2), and mixedFrequency(4) + is not required." + + OBJECT etherWisDeviceRxTestPatternMode + SYNTAX INTEGER { + none(1), + mixedFrequency(4) + } + DESCRIPTION + "Support for values other than none(1) + and mixedFrequency(4) is not required." + + GROUP etherWisDeviceGroupExtra + DESCRIPTION + "Implementation of this group, along with support for + the value prbs31(3) for etherWisDeviceTxTestPatternMode + and etherWisDeviceRxTestPatternMode, is necessary if the + optional PRBS31 test pattern mode is to be supported." + + OBJECT etherWisDeviceRxTestPatternErrors + WRITE-SYNTAX Gauge32 ( 0 ) + DESCRIPTION + "An implementation is not required to + allow values other than zero to be + written to this object." + + MODULE SONET-MIB + MANDATORY-GROUPS { + sonetMediumStuff2, + sonetSectionStuff2, + sonetLineStuff2, + sonetFarEndLineStuff2, + sonetPathStuff2, + sonetFarEndPathStuff2 + } + + OBJECT sonetMediumType + SYNTAX INTEGER { + sonet(1) + } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, nor is support + for any value other than sonet(1)." + + OBJECT sonetMediumLineCoding + SYNTAX INTEGER { + sonetMediumNRZ(4) + } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, nor is support + for any value other than sonetMediumNRZ(4)." + + OBJECT sonetMediumLineType + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT sonetMediumCircuitIdentifier + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT sonetMediumLoopbackConfig + SYNTAX BITS { + sonetNoLoop(0), + sonetFacilityLoop(1) + } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, nor is support for values + other than sonetNoLoop(0) and sonetFacilityLoop(1)." + + OBJECT sonetSESthresholdSet + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, and only one + of the enumerated values need be supported." + + OBJECT sonetPathCurrentWidth + SYNTAX INTEGER { + sts192cSTM64(6) + } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, nor is support + for any value other than sts192cSTM64(6)." + + ::= { etherWisCompliances 1 } + +END |