diff options
Diffstat (limited to 'MIBS/juniper/Juniper-IP-POLICY-MIB')
| -rw-r--r-- | MIBS/juniper/Juniper-IP-POLICY-MIB | 1992 |
1 files changed, 1992 insertions, 0 deletions
diff --git a/MIBS/juniper/Juniper-IP-POLICY-MIB b/MIBS/juniper/Juniper-IP-POLICY-MIB new file mode 100644 index 0000000..e2e5aa9 --- /dev/null +++ b/MIBS/juniper/Juniper-IP-POLICY-MIB @@ -0,0 +1,1992 @@ + +-- ***************************************************************************** +-- Juniper-IP-POLICY-MIB +-- +-- Juniper Networks Enterprise MIB +-- Extensions for IP Policy management +-- +-- Copyright (c) 1998 Redstone Communications, Inc. +-- Copyright (c) 2000, 2002 Unisphere Networks, Inc. +-- Copyright (c) 2003 Juniper Networks, Inc. +-- Copyright (c) 2006 Juniper Networks, Inc. +-- All Rights Reserved. +-- ***************************************************************************** + + +Juniper-IP-POLICY-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Counter32, Integer32 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, RowStatus, DisplayString, TruthValue + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + juniMibs + FROM Juniper-MIBs; + +juniIpPolicyMIB MODULE-IDENTITY + LAST-UPDATED "200701250824Z" -- 25-Jan-07 03:24 AM EST + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Networks, Inc. + Postal: 10 Technology Park Drive + Westford, MA 01886-3146 + USA + Tel: +1 978 589 5800 + Email: mib@Juniper.net" + DESCRIPTION + "The IP Policy MIB for the Juniper Networks enterprise." + -- Revision History + REVISION "200701250834Z" -- 25-Jan-07 03:34 AM EST - JUNOSe 7.0 + DESCRIPTION + "Changed the length of octet string for juniIpAspAccessExpression to + vary from 1 to 256." + REVISION "200607250413Z" -- 24-Jul-06 11:13 PM EST - JUNOSe 6.0 + DESCRIPTION + "Changed the length of octet string for juniIpCommunityListExpression to + vary from 1 to 256." + REVISION "200601101421Z" -- 10-Jan-06 09:21 AM EST - JUNOSe 7.1 + DESCRIPTION + "Added two more protocols to JuniIpRedistributeProtocol." + REVISION "200402051421Z" -- 05-Feb-04 09:21 AM EST - JUNOSe 5.3 + DESCRIPTION + "Added Policy-List under juniIpRouteMapClauseElemId." + REVISION "200302051421Z" -- 05-Feb-03 09:21 AM EST - JUNOSe 5.1 + DESCRIPTION + "Added IP route maps config support." + REVISION "200302042230Z" -- 04-Feb-03 05:30 PM EST - JUNOSe 5.0 + DESCRIPTION + "Replaced Unisphere names with Juniper names. + Fixed the index for the juniIpDynRedistributeTable." + REVISION "200201031506Z" -- 03-Jan-02 11:06 AM EDT - JUNOSe 3.0 + DESCRIPTION + "Expanded MIB to include following tables: + JuniIpAspAccessListTable + JuniIpPrefixListTable + JuniIpPrefixTreeTable + JuniIpCommunityListTable + JuniIpExtCommunityListTable + JuniIpRedistributeTable + JuniIpRouteMapTable + Expanded MIB to include a new textual convention: + JuniIpPolicyExtendedCommunity" + REVISION "200007200000Z" -- 20-Jul-00 - JUNOSe 2.0 + DESCRIPTION + "Added Named Access List support." + REVISION "9811190000Z" -- 19-Nov-98 - JUNOSe 1.0 + DESCRIPTION + "Initial version of this MIB module." + ::= { juniMibs 13 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Textual conventions +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +JuniIpPolicyName ::= TEXTUAL-CONVENTION + DISPLAY-HINT "32a" + STATUS current + DESCRIPTION + "IP access list name. Represents textual information taken from the NVT + ASCII character set." + REFERENCE + "RFC 854: NVT ASCII character set. See SNMPv2-TC.DisplayString + DESCRIPTION for a summary." + SYNTAX OCTET STRING (SIZE(0..32)) + +JuniIpPolicyPolicy ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The set of IP policy actions." + SYNTAX INTEGER { + permit(0), + deny(1) } + +JuniIpDynRedistributeProtocol ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The set of protocols choices used to configure to/from settings in an + IP Dynamic Route Redistribution element." + SYNTAX INTEGER { + ipRedistrProtocolIsis(1), + ipRedistrProtocolRip(2), + ipRedistrProtocolOspf(3), + ipRedistrProtocolStatic(4), + ipRedistrProtocolConnected(5), + ipRedistrProtocolBgp(6), + ipRedistrProtocolMBgp(7), + ipRedistrProtocolStaticLow(8), + ipRedistrProtocolOspfIntern(9), + ipRedistrProtocolOspfExtern(10), + ipRedistrProtocolDvmrp(11), + ipRedistrProtocolDvmrpAggregate(12), + ipRedistrProtocolHidden(13), + ipRedistrProtocolOwnerAccess(14), + ipRedistrProtocolOwnerAccessInternal(15), + ipRedistrProtocolOwnerDialout(16), + ipRedistrProtocolDefaultRoute(17) } + +JuniIpRedistributeProtocol ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The set of protocols choices used to configure to/from settings in an + IP Redistribution element." + SYNTAX INTEGER { + ipRedistrProtocolStatic(1), + ipRedistrProtocolBgp(2), + ipRedistrProtocolMBgp(3), + ipRedistrProtocolOspf(4), + ipRedistrProtocolIsis(5), + ipRedistrProtocolRip(6), + ipRedistrProtocolConnected(7), + ipRedistrProtocolDefaultRoute(8), + ipRedistrProtocolAccess(9), + ipRedistrProtocolAccessInternal(10), + ipRedistrProtocolDvmrp(11), + ipRedistrProtocolDialout(12), + ipRedistrProtocolOspfM(13), + ipRedistrProtocolStaticMcast(14), + ipRedistrProtocolLdpUcast(15) } + +JuniIpPolicyAdminStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The administratively assigned management state for an IP route policy." + SYNTAX INTEGER { + ipPolicyAdminStateDisable(0), + ipPolicyAdminStateEnable(1) } + +JuniIpPolicyExtendedCommunity ::= TEXTUAL-CONVENTION + DISPLAY-HINT "22a" + STATUS current + DESCRIPTION + "The extended community specification. Represents textual information + taken from the NVT ASCII character set. The format of the text string + is defined by either one of these choices: + + In: + ASN::nn where ASN is a 16 bit decimal number and + nn is a 32 bit decimal number + + Or: + IP-address::nn where IP-address is in dotted decimal format + and nn is a 16 bit decimal number + " + REFERENCE + "RFC 854: NVT ASCII character set." + SYNTAX OCTET STRING (SIZE(0..22)) + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Managed objects +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniIpPolicyObjects OBJECT IDENTIFIER ::= { juniIpPolicyMIB 1 } + +juniIpAccessList OBJECT IDENTIFIER ::= { juniIpPolicyObjects 1 } +juniIpNamedAccessList OBJECT IDENTIFIER ::= { juniIpPolicyObjects 2 } +juniIpAspAccessList OBJECT IDENTIFIER ::= { juniIpPolicyObjects 3 } +juniIpPrefixList OBJECT IDENTIFIER ::= { juniIpPolicyObjects 4 } +juniIpPrefixTree OBJECT IDENTIFIER ::= { juniIpPolicyObjects 5 } +juniIpCommunityList OBJECT IDENTIFIER ::= { juniIpPolicyObjects 6 } +juniIpRedistributeList OBJECT IDENTIFIER ::= { juniIpPolicyObjects 7 } +juniIpRouteMapTree OBJECT IDENTIFIER ::= { juniIpPolicyObjects 8 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- IP Access Lists +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- +-- The IP Access List Table +-- +juniIpAccessListTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpAccessListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for elements of IP access lists. Entries + belonging to the same access list are ordered, and comparisons to those + entries are performed in that order until a match is detected. If no + match is found, the default action is to 'deny'." + ::= { juniIpAccessList 1 } + +juniIpAccessListEntry OBJECT-TYPE + SYNTAX JuniIpAccessListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an IP access list element." + INDEX { juniIpAccessListId, + juniIpAccessListElemId } + ::= { juniIpAccessListTable 1 } + +JuniIpAccessListEntry ::= SEQUENCE { + juniIpAccessListId Integer32, + juniIpAccessListElemId Integer32, + juniIpAccessListRowStatus RowStatus, + juniIpAccessListAction JuniIpPolicyPolicy, + juniIpAccessListSrc IpAddress, + juniIpAccessListSrcMask IpAddress, + juniIpAccessListDst IpAddress, + juniIpAccessListDstMask IpAddress, + juniIpAccessListProtocol Integer32 } + +juniIpAccessListId OBJECT-TYPE + SYNTAX Integer32 (1..10000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The number of the access list to which this entry belongs." + ::= { juniIpAccessListEntry 1 } + +juniIpAccessListElemId OBJECT-TYPE + SYNTAX Integer32 (0..10000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The relative position of this entry within its access list. Access + list entries are searched in this sequence (low to high values) until a + match is found. + + NOTE: The value zero is reserved for use with SET operations to perform + special-purpose table entry creations/deletions; see the DESCRIPTION of + juniIpAccessListRowStatus for details. + + Get/GetNext/GetBulk retrievals never return an entry for which this + object is zero-valued." + ::= { juniIpAccessListEntry 2 } + +juniIpAccessListRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + Two configuration levels are defined, limited and full. EARLY + IMPLEMENTATIONS MIGHT PROVIDE ONLY THE LIMITED LEVEL OF CONFIGURATION + CAPABILITY. + + *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** + + 1) RowStatus createAndGo/destroy operations directed to a target table + entry for which juniIpAccessListElemId is ZERO, have the following + special-purpose semantics: + createAndGo Create an entry having the specified + configuration and append it to the target list, + i.e. assign it a value of juniIpAccessListElemId + that is one greater than the current last + element in the list. + destroy Destroy the specified list and all of its + constituent elements. + + 2) RowStatus createAndGo/destroy operations directed to a target table + entry for which juniIpAccessListElemId is NONZERO are disallowed. + + *** FULL ACCESS LIST CONFIGURATION LEVEL *** + + Permit conventional RowStatus-based management of table entries having a + nonzero value for juniIpAccessListElemId, IN ADDITION TO the special + RowStatus semantics applied to entries having a zero value for + juniIpAccessListElemId. + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpAccessListRowStatus + + In addition, when creating an entry the following conditions must hold: + + The value of juniIpAccessListElemId is nonzero. + + Once created, element attributes cannot be modified except by a + RowStatus destroy operation to delete the list element." + ::= { juniIpAccessListEntry 3 } + +juniIpAccessListAction OBJECT-TYPE + SYNTAX JuniIpPolicyPolicy + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the disposition of an item that matches the comparison + criteria described by this entry." + DEFVAL { permit } + ::= { juniIpAccessListEntry 4 } + +juniIpAccessListSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A source IP address. A subject IP address is first masked with the + value of juniIpAccessListSrcMask, then the result is compared to this + value. Setting both this object and its corresponding mask to 0.0.0.0 + acts as a wildcard, matching any source IP address." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { juniIpAccessListEntry 5 } + +juniIpAccessListSrcMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP address mask to be applied to a subject source IP address before + comparing it to juniIpAccessListSrc. Ones in the mask identify which + bits in the subject IP address are significant for the comparison. + + To be considered valid, a nonzero value for this object must contain a + single contiguous string of ones, beginning with the most significant + bit of the mask." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { juniIpAccessListEntry 6 } + +juniIpAccessListDst OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A destination IP address. A subject IP address is first masked with + the value of juniIpAccessListDstMask, then the result is compared to + this value. Setting both this object and its corresponding mask to + 0.0.0.0 acts as a wildcard, matching any destination IP address." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { juniIpAccessListEntry 7 } + +juniIpAccessListDstMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP address mask to be applied to a subject destination IP address + before comparing it to juniIpAccessListDst. Ones in the mask identify + which bits in the IP address are significant for the comparison. + + To be considered valid, a nonzero value for this object must contain a + single contiguous string of ones, beginning with the most significant + bit of the mask." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { juniIpAccessListEntry 8 } + +juniIpAccessListProtocol OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An IP Protocol value. Nonzero values match a specific IP Protocol + value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as + a wildcard, matching any IP Protocol." + DEFVAL { 0 } + ::= { juniIpAccessListEntry 9 } + + +-- +-- The IP Named Access List Table +-- +juniIpNamedAccessListTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpNamedAccessListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for elements of IP access lists. Entries + belonging to the same access list are ordered, and comparisons to those + entries are performed in that order until a match is detected. If no + match is found, the default action is to 'deny'." + ::= { juniIpNamedAccessList 1 } + +juniIpNamedAccessListEntry OBJECT-TYPE + SYNTAX JuniIpNamedAccessListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an IP access list element." + INDEX { juniIpNamedAccessListName, + juniIpNamedAccessListElemId } + ::= { juniIpNamedAccessListTable 1 } + +JuniIpNamedAccessListEntry ::= SEQUENCE { + juniIpNamedAccessListName JuniIpPolicyName, + juniIpNamedAccessListElemId Integer32, + juniIpNamedAccessListRowStatus RowStatus, + juniIpNamedAccessListAction JuniIpPolicyPolicy, + juniIpNamedAccessListSrc IpAddress, + juniIpNamedAccessListSrcMask IpAddress, + juniIpNamedAccessListDst IpAddress, + juniIpNamedAccessListDstMask IpAddress, + juniIpNamedAccessListProtocol Integer32 } + +juniIpNamedAccessListName OBJECT-TYPE + SYNTAX JuniIpPolicyName + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of the access list to which this entry belongs." + ::= { juniIpNamedAccessListEntry 1 } + +juniIpNamedAccessListElemId OBJECT-TYPE + SYNTAX Integer32 (0..10000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The relative position of this entry within its access list. Access + list entries are searched in this sequence (low to high values) until a + match is found. + + NOTE: The value zero is reserved for use with SET operations to perform + special-purpose table entry creations/deletions; see the DESCRIPTION of + juniIpNamedAccessListRowStatus for details. + + Get/GetNext/GetBulk retrievals never return an entry for which this + object is zero-valued." + ::= { juniIpNamedAccessListEntry 2 } + +juniIpNamedAccessListRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + Two configuration levels are defined, limited and full. EARLY + IMPLEMENTATIONS MIGHT PROVIDE ONLY THE LIMITED LEVEL OF CONFIGURATION + CAPABILITY. + + *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** + + 1) RowStatus createAndGo/destroy operations directed to a target table + entry for which juniIpNamedAccessListElemId is ZERO, have the + following special-purpose semantics: + createAndGo Create an entry having the specified + configuration and append it to the target list, + i.e. assign it a value of + juniIpNamedAccessListElemId that is one greater + than the current last element in the list. + destroy Destroy the specified list and all of its + constituent elements. + + 2) RowStatus createAndGo/destroy operations directed to a target table + entry for which juniIpNamedAccessListElemId is NONZERO are + disallowed. + + *** FULL ACCESS LIST CONFIGURATION LEVEL *** + + Permit conventional RowStatus-based management of table entries having a + nonzero value for juniIpNamedAccessListElemId, IN ADDITION TO the + special RowStatus semantics applied to entries having a zero value for + juniIpNamedAccessListElemId. + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpNamedAccessListRowStatus + + In addition, when creating an entry the following conditions must hold: + + The value of juniIpNamedAccessListElemId is nonzero. + + Once created, element attributes cannot be modified except by a + RowStatus destroy operation to delete the list element." + ::= { juniIpNamedAccessListEntry 3 } + +juniIpNamedAccessListAction OBJECT-TYPE + SYNTAX JuniIpPolicyPolicy + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifies the disposition of an item that matches the comparison + criteria described by this entry." + DEFVAL { permit } + ::= { juniIpNamedAccessListEntry 4 } + +juniIpNamedAccessListSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A source IP address. A subject IP address is first masked with the + value of juniIpNamedAccessListSrcMask, then the result is compared to + this value. Setting both this object and its corresponding mask to + 0.0.0.0 acts as a wildcard, matching any source IP address." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { juniIpNamedAccessListEntry 5 } + +juniIpNamedAccessListSrcMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP address mask to be applied to a subject source IP address before + comparing it to juniIpNamedAccessListSrc. Ones in the mask identify + which bits in the subject IP address are significant for the comparison. + + To be considered valid, a nonzero value for this object must contain a + single contiguous string of ones, beginning with the most significant + bit of the mask." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { juniIpNamedAccessListEntry 6 } + +juniIpNamedAccessListDst OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A destination IP address. A subject IP address is first masked with + the value of juniIpNamedAccessListDstMask, then the result is compared + to this value. Setting both this object and its corresponding mask to + 0.0.0.0 acts as a wildcard, matching any destination IP address." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { juniIpNamedAccessListEntry 7 } + +juniIpNamedAccessListDstMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP address mask to be applied to a subject destination IP address + before comparing it to juniIpNamedAccessListDst. Ones in the mask + identify which bits in the IP address are significant for the + comparison. + + To be considered valid, a nonzero value for this object must contain a + single contiguous string of ones, beginning with the most significant + bit of the mask." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { juniIpNamedAccessListEntry 8 } + +juniIpNamedAccessListProtocol OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An IP Protocol value. Nonzero values match a specific IP Protocol + value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as + a wildcard, matching any IP Protocol." + DEFVAL { 0 } + ::= { juniIpNamedAccessListEntry 9 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- IP AS-Path Access List +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- +-- The IP AS-Path Access Table +-- +juniIpAspAccessTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpAspAccessEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for elements of IP AS-Path access entries." + ::= { juniIpAspAccessList 1 } + +juniIpAspAccessEntry OBJECT-TYPE + SYNTAX JuniIpAspAccessEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an IP AS-Path access + element." + INDEX { juniIpAspAccessName, + juniIpAspAccessElemId } + ::= { juniIpAspAccessTable 1 } + +JuniIpAspAccessEntry ::= SEQUENCE { + juniIpAspAccessName JuniIpPolicyName, + juniIpAspAccessElemId Integer32, + juniIpAspAccessCreatedInternally TruthValue, + juniIpAspAccessPolicy JuniIpPolicyPolicy, + juniIpAspAccessExpression OCTET STRING, + juniIpAspAccessRowStatus RowStatus } + +juniIpAspAccessName OBJECT-TYPE + SYNTAX JuniIpPolicyName + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of the AS-Path Access List to which this entry belongs." + ::= { juniIpAspAccessEntry 1 } + +juniIpAspAccessElemId OBJECT-TYPE + SYNTAX Integer32 (0..10000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The element ID portion of the IP AS-Path for this entry." + ::= { juniIpAspAccessEntry 2 } + +juniIpAspAccessCreatedInternally OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicated whether this entry was created internally by the system, or + dynamically via a management interface. A true value for this object + indicates that this entry was created internally; false indicates + externally." + ::= { juniIpAspAccessEntry 3 } + +juniIpAspAccessPolicy OBJECT-TYPE + SYNTAX JuniIpPolicyPolicy + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the action to take for this AS-Path access list." + ::= { juniIpAspAccessEntry 4 } + +juniIpAspAccessExpression OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1..256)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The AS-Path access list expression for this entry." + ::= { juniIpAspAccessEntry 5 } + +juniIpAspAccessRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpCommunityRowStatus + + In addition, when creating an entry the following conditions must hold: + + Once created, only certain attributes can be modified." + ::= { juniIpAspAccessEntry 6 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- IP Prefix Lists +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- +-- The IP Prefix List Table +-- +juniIpPrefixListTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpPrefixListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for elements of IP prefix lists. Entries + belonging to the same prefix list are ordered, and comparisons to those + entries are performed in that order until a match is detected. If no + match is found, the default action is to 'deny'." + ::= { juniIpPrefixList 1 } + +juniIpPrefixListEntry OBJECT-TYPE + SYNTAX JuniIpPrefixListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an IP prefix list element." + INDEX { juniIpPrefixListName, + juniIpPrefixListElemId, + juniIpPrefixListIpAddress, + juniIpPrefixListLength } + ::= { juniIpPrefixListTable 1 } + +JuniIpPrefixListEntry ::= SEQUENCE { + juniIpPrefixListName JuniIpPolicyName, + juniIpPrefixListElemId Integer32, + juniIpPrefixListIpAddress IpAddress, + juniIpPrefixListLength Integer32, + juniIpPrefixListPolicy JuniIpPolicyPolicy, + juniIpPrefixListGeValue Integer32, + juniIpPrefixListLeValue Integer32, + juniIpPrefixListDescription DisplayString, + juniIpPrefixListHitCount Counter32, + juniIpPrefixListRowStatus RowStatus } + +juniIpPrefixListName OBJECT-TYPE + SYNTAX JuniIpPolicyName + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of the prefix list to which this entry belongs." + ::= { juniIpPrefixListEntry 1 } + +juniIpPrefixListElemId OBJECT-TYPE + SYNTAX Integer32 (0..10000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The relative position of this entry within its prefix list. Access + list entries are searched in this sequence (low to high values) until a + match is found." + ::= { juniIpPrefixListEntry 2 } + +juniIpPrefixListIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP Address portion of the IP List value for this entry." + ::= { juniIpPrefixListEntry 3 } + +juniIpPrefixListLength OBJECT-TYPE + SYNTAX Integer32 (0..32) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The length portion of the IP List value for this entry." + ::= { juniIpPrefixListEntry 4 } + +juniIpPrefixListPolicy OBJECT-TYPE + SYNTAX JuniIpPolicyPolicy + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP Prefix list action to perform for this entry." + ::= { juniIpPrefixListEntry 5 } + +juniIpPrefixListGeValue OBJECT-TYPE + SYNTAX Integer32 (0..32) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The minimum prefix length to apply to address." + ::= { juniIpPrefixListEntry 6 } + +juniIpPrefixListLeValue OBJECT-TYPE + SYNTAX Integer32 (0..32) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum prefix length to apply to address." + ::= { juniIpPrefixListEntry 7 } + +juniIpPrefixListDescription OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The administratively assigned description for this entry." + ::= { juniIpPrefixListEntry 8 } + +juniIpPrefixListHitCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of hits for this entry." + ::= { juniIpPrefixListEntry 9 } + +juniIpPrefixListRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + + juniIpPrefixListRowStatus + + In addition, when creating an entry the following conditions must hold: + + The value of juniIpPrefixListElemId is nonzero. + + Once created, only certain attributes can be modified." + ::= { juniIpPrefixListEntry 10 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- IP Prefix Tree +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- +-- The IP Prefix Tree Table +-- +juniIpPrefixTreeTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpPrefixTreeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for elements of IP prefix trees. Entries + belonging to the same prefix tree are ordered, and comparisons to those + entries are performed in that order until a match is detected. If no + match is found, the default action is to 'deny'." + ::= { juniIpPrefixTree 1 } + +juniIpPrefixTreeEntry OBJECT-TYPE + SYNTAX JuniIpPrefixTreeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an IP prefix tree element." + INDEX { juniIpPrefixTreeName, + juniIpPrefixTreeIpAddress, + juniIpPrefixTreeLength } + ::= { juniIpPrefixTreeTable 1 } + +JuniIpPrefixTreeEntry ::= SEQUENCE { + juniIpPrefixTreeName JuniIpPolicyName, + juniIpPrefixTreeIpAddress IpAddress, + juniIpPrefixTreeLength Integer32, + juniIpPrefixTreePolicy JuniIpPolicyPolicy, + juniIpPrefixTreeDescription DisplayString, + juniIpPrefixTreeHitCount Counter32, + juniIpPrefixTreeRowStatus RowStatus } + +juniIpPrefixTreeName OBJECT-TYPE + SYNTAX JuniIpPolicyName + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of the prefix tree to which this entry belongs." + ::= { juniIpPrefixTreeEntry 1 } + +juniIpPrefixTreeIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP Address portion of the IP Prefix value for this entry." + ::= { juniIpPrefixTreeEntry 2 } + +juniIpPrefixTreeLength OBJECT-TYPE + SYNTAX Integer32 (0..32) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The length portion of the IP Prefix value for this entry." + ::= { juniIpPrefixTreeEntry 3 } + +juniIpPrefixTreePolicy OBJECT-TYPE + SYNTAX JuniIpPolicyPolicy + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP Prefix tree policy perform for this entry." + ::= { juniIpPrefixTreeEntry 4 } + +juniIpPrefixTreeDescription OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The administratively assigned description for this entry." + ::= { juniIpPrefixTreeEntry 5 } + +juniIpPrefixTreeHitCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of hits for this entry." + ::= { juniIpPrefixTreeEntry 6 } + +juniIpPrefixTreeRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpPrefixTreeRowStatus + + In addition, when creating an entry the following conditions must hold: + + The value of juniIpPrefixTreeIpAddress and juniIpPrefixTreeLength + are nonzero. + + Once created, only certain attributes can be modified." + ::= { juniIpPrefixTreeEntry 7 } + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- IP Community List Tables +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + +-- +-- The IP Community List Table +-- +juniIpCommunityListTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpCommunityListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for elements of IP Community Lists. + Entries belonging to the same Community List are ordered. The table + supports standard and extended community lists." + ::= { juniIpCommunityList 1 } + +juniIpCommunityListEntry OBJECT-TYPE + SYNTAX JuniIpCommunityListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an IP Community List + element." + INDEX { juniIpCommunityListName, + juniIpCommunityListElemId } + ::= { juniIpCommunityListTable 1 } + +JuniIpCommunityListEntry ::= SEQUENCE { + juniIpCommunityListName JuniIpPolicyName, + juniIpCommunityListElemId Integer32, + juniIpCommunityListCreatedInternally TruthValue, + juniIpCommunityListExtended TruthValue, + juniIpCommunityListPolicy JuniIpPolicyPolicy, + juniIpCommunityListExpression OCTET STRING, + juniIpCommunityListRowStatus RowStatus } + +juniIpCommunityListName OBJECT-TYPE + SYNTAX JuniIpPolicyName + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of the Community List to which this entry belongs." + ::= { juniIpCommunityListEntry 1 } + +juniIpCommunityListElemId OBJECT-TYPE + SYNTAX Integer32 (0..10000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP Address portion of the IP Prefix value for this entry." + ::= { juniIpCommunityListEntry 2 } + +juniIpCommunityListCreatedInternally OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicated whether this entry was created internally by the system, or + dynamically via a management interface. A true value for this object + indicates that this entry was created internally; false indicates + externally." + ::= { juniIpCommunityListEntry 3 } + +juniIpCommunityListExtended OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates whether this entry is a standard or extended Community List. + True indicates extended, false indicates standard" + ::= { juniIpCommunityListEntry 4 } + +juniIpCommunityListPolicy OBJECT-TYPE + SYNTAX JuniIpPolicyPolicy + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the policy action to perform for this list." + ::= { juniIpCommunityListEntry 5 } + +juniIpCommunityListExpression OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1..256)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The community list expression for this entry." + ::= { juniIpCommunityListEntry 6 } + +juniIpCommunityListRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpCommunityRowStatus + + In addition, when creating an entry the following conditions must hold: + + Once created, only certain attributes can be modified." + ::= { juniIpCommunityListEntry 7 } + + +-- +-- The IP Extended Community List Table +-- +juniIpExtCommunityListTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpExtCommunityListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for Extended IP Community Lists. Entries + belonging to the same Extended Community List are ordered." + ::= { juniIpCommunityList 2 } + +juniIpExtCommunityListEntry OBJECT-TYPE + SYNTAX JuniIpExtCommunityListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an Extended IP Community + List element." + INDEX { juniIpExtCommunityListName, + juniIpExtCommunityListElemId } + ::= { juniIpExtCommunityListTable 1 } + +JuniIpExtCommunityListEntry ::= SEQUENCE { + juniIpExtCommunityListName JuniIpPolicyName, + juniIpExtCommunityListElemId Integer32, + juniIpExtCommunityListCreatedInternally TruthValue, + juniIpExtCommunityListPolicy JuniIpPolicyPolicy, + juniIpExtCommunityListExpression OCTET STRING, + juniIpExtCommunityListRowStatus RowStatus } + +juniIpExtCommunityListName OBJECT-TYPE + SYNTAX JuniIpPolicyName + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of the Extended Community List to which this entry belongs." + ::= { juniIpExtCommunityListEntry 1 } + +juniIpExtCommunityListElemId OBJECT-TYPE + SYNTAX Integer32 (0..10000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The element ID value for this entry." + ::= { juniIpExtCommunityListEntry 2 } + +juniIpExtCommunityListCreatedInternally OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicated whether this entry was created internally by the system, or + dynamically via a management interface. A true value for this object + indicates that this entry was created internally; false indicates + externally." + ::= { juniIpExtCommunityListEntry 3 } + +juniIpExtCommunityListPolicy OBJECT-TYPE + SYNTAX JuniIpPolicyPolicy + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the policy action to perform for this list." + ::= { juniIpExtCommunityListEntry 4 } + +juniIpExtCommunityListExpression OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(8..256)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The extended community list expression for this entry." + ::= { juniIpExtCommunityListEntry 5 } + +juniIpExtCommunityListRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpExtCommunityRowStatus + + In addition, when creating an entry the following conditions must hold: + + The value of juniIpExtCommunityListElemId is included in this table + as a key for future use. It must be the value zero. + + Once created, only certain attributes can be modified." + ::= { juniIpExtCommunityListEntry 6 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- IP Redistribute Tables +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- +-- The IP Dynamic Route Redistribution Table +-- +juniIpDynRedistributeTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpDynRedistributeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for elements of IP Dynamic Route + Redistribution elements." + ::= { juniIpRedistributeList 1 } + +juniIpDynRedistributeEntry OBJECT-TYPE + SYNTAX JuniIpDynRedistributeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of a dynamic IP Route + Redistribute element." + INDEX { juniIpDynRedistributeToProtocol } + ::= { juniIpDynRedistributeTable 1 } + +JuniIpDynRedistributeEntry ::= SEQUENCE { + juniIpDynRedistributeToProtocol JuniIpDynRedistributeProtocol, + juniIpDynRedistributeState JuniIpPolicyAdminStatus, + juniIpDynRedistributeRowStatus RowStatus } + +juniIpDynRedistributeToProtocol OBJECT-TYPE + SYNTAX JuniIpDynRedistributeProtocol + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Identifies the protocol associated with this Dynamic Route + Redistribution element that routes are redistributed to." + ::= { juniIpDynRedistributeEntry 1 } + +juniIpDynRedistributeState OBJECT-TYPE + SYNTAX JuniIpPolicyAdminStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the enable/disable state of this redistribution element." + DEFVAL { ipPolicyAdminStateEnable } + ::= { juniIpDynRedistributeEntry 2 } + +juniIpDynRedistributeRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpDynRedistributeRowStatus + + Once created, only the juniIpDynRedistributeState object can be + modified." + ::= { juniIpDynRedistributeEntry 3 } + + +-- +-- The IP Route Redistribution Table +-- +juniIpRedistributeTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpRedistributeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for elements of IP Route Redistribution + elements." + ::= { juniIpRedistributeList 2 } + +juniIpRedistributeEntry OBJECT-TYPE + SYNTAX JuniIpRedistributeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an IP Route Redistribution + element." + INDEX { juniIpRedistributeToProtocol, + juniIpRedistributeFromProtocol } + ::= { juniIpRedistributeTable 1 } + +JuniIpRedistributeEntry ::= SEQUENCE { + juniIpRedistributeToProtocol JuniIpRedistributeProtocol, + juniIpRedistributeFromProtocol JuniIpRedistributeProtocol, + juniIpRedistributeState JuniIpPolicyAdminStatus, + juniIpRedistributeRouteMapName JuniIpPolicyName, + juniIpRedistributeRowStatus RowStatus } + +juniIpRedistributeToProtocol OBJECT-TYPE + SYNTAX JuniIpRedistributeProtocol + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Identifies the protocol for this element that routes are redistributed + to." + ::= { juniIpRedistributeEntry 1 } + +juniIpRedistributeFromProtocol OBJECT-TYPE + SYNTAX JuniIpRedistributeProtocol + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Identifies the protocol for this element that routes are redistributed + from." + ::= { juniIpRedistributeEntry 2 } + +juniIpRedistributeState OBJECT-TYPE + SYNTAX JuniIpPolicyAdminStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the enable/disable state of this redistribution element." + DEFVAL { ipPolicyAdminStateEnable } + ::= { juniIpRedistributeEntry 3 } + +juniIpRedistributeRouteMapName OBJECT-TYPE + SYNTAX JuniIpPolicyName + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Identifies the IP route-map associated with this IP Route + Redistribution element." + ::= { juniIpRedistributeEntry 4 } + +juniIpRedistributeRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpRedistributeRowStatus + juniIpRedistributeRouteMapName + + Once created, only the juniIpRedistributeState object can be modified." + ::= { juniIpRedistributeEntry 5 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- IP Route-Map Tables +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- +-- The IP Route-Map Table +-- +juniIpRouteMapTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpRouteMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for elements of IP Route Maps." + ::= { juniIpRouteMapTree 1 } + +juniIpRouteMapEntry OBJECT-TYPE + SYNTAX JuniIpRouteMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of an IP Route Map element." + INDEX { juniIpRouteMapName, + juniIpRouteMapSequenceNum, + juniIpRouteMapElemId, + juniIpRouteMapSubElemId } + ::= { juniIpRouteMapTable 1 } + +JuniIpRouteMapEntry ::= SEQUENCE { + juniIpRouteMapName JuniIpPolicyName, + juniIpRouteMapSequenceNum Integer32, + juniIpRouteMapElemId Integer32, + juniIpRouteMapSubElemId Integer32, + juniIpRouteMapCreatedInternally TruthValue, + juniIpRouteMapPolicy JuniIpPolicyPolicy, + juniIpRouteMapDisplay OCTET STRING } + +juniIpRouteMapName OBJECT-TYPE + SYNTAX JuniIpPolicyName + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of the route map to which this entry belongs." + ::= { juniIpRouteMapEntry 1 } + +juniIpRouteMapSequenceNum OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The element ID value for this entry." + ::= { juniIpRouteMapEntry 2 } + +juniIpRouteMapElemId OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The element ID to which this entry belongs." + ::= { juniIpRouteMapEntry 3 } + +juniIpRouteMapSubElemId OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The sub-element ID to which this entry belongs." + ::= { juniIpRouteMapEntry 4 } + +juniIpRouteMapCreatedInternally OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicated whether this entry was created internally by the system, or + dynamically via a management interface. A true value for this object + indicates that this entry was created internally; false indicates + externally." + ::= { juniIpRouteMapEntry 5 } + +juniIpRouteMapPolicy OBJECT-TYPE + SYNTAX JuniIpPolicyPolicy + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the policy action performed by this element." + ::= { juniIpRouteMapEntry 6 } + +juniIpRouteMapDisplay OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..2048)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Textual information taken from the NVT ASCII character set + (i.e. RFC1903 DisplayString), but with increased length. The + information in this object is the series of set, match, and/or match & + set clauses for this route map. + + It is assumed that the information conveyed in this object is used for + display purposes and in general, is not parsed. The information in this + string is a concatentation of routemap clauses configured via the + systems non SNMP interface." + ::= { juniIpRouteMapEntry 7 } + +-- +-- The IP Route-Map version 2 Table +-- +juniIpRouteMapV2Table OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpRouteMapV2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for route maps instances." + ::= { juniIpRouteMapTree 2 } + +juniIpRouteMapV2Entry OBJECT-TYPE + SYNTAX JuniIpRouteMapV2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry is a specific instance of the Route Map." + INDEX { juniIpRouteMapV2Name, + juniIpRouteMapV2SequenceNum } + ::= { juniIpRouteMapV2Table 1 } + +JuniIpRouteMapV2Entry ::= SEQUENCE { + juniIpRouteMapV2Name JuniIpPolicyName, + juniIpRouteMapV2SequenceNum Integer32, + juniIpRouteMapV2Policy JuniIpPolicyPolicy, + juniIpRouteMapV2RowStatus RowStatus } + +juniIpRouteMapV2Name OBJECT-TYPE + SYNTAX JuniIpPolicyName + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of the route map to which this instance entry belongs." + ::= { juniIpRouteMapV2Entry 1 } + +juniIpRouteMapV2SequenceNum OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Multiple instances of the same route map can be created by assigning a + different sequence number to it. Each instance is identified by the + route map name and the sequence number. The value of the sequence + number associated with the particular route map instance determines the + order in which the routing protocol evaluates routes; the instance of + having lowest sequence number is evaluated first. If the routes pass + all the match conditions specified in the lowest-numbered instance, and + if all set clause elements are successfully configured, then no other + instance of the route map is considered. However, any routes that do + not pass all the match conditions are evaluated against the next + instance of the route map." + ::= { juniIpRouteMapV2Entry 2 } + +juniIpRouteMapV2Policy OBJECT-TYPE + SYNTAX JuniIpPolicyPolicy + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the policy action performed by this route map instance." + DEFVAL { permit } + ::= { juniIpRouteMapV2Entry 3 } + +juniIpRouteMapV2RowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpRouteMapV2RowStatus + + To delete an entry in this table, the following entry objects MUST be + explicitly configured: + juniIpRouteMapV2RowStatus + + Once created, juniIpRouteMapV2Policy attribute can be modified. + To modify juniIpRouteMapV2Policy, set juniIpRouteMapV2RowStatus also. + + Note: Match, match-set and set clause elements can be configured for a + specific instance of the route map. First create the route map + instance to make use of the same to configure in the clause table. + Deletion of the route map instance will also delete all the clause + elements confgured for that instance as clause elements are + configured for that instance." + ::= { juniIpRouteMapV2Entry 4 } + + +-- +-- The IP route-map clauses(set, match-set and match) table +-- +juniIpRouteMapClauseTable OBJECT-TYPE + SYNTAX SEQUENCE OF JuniIpRouteMapClauseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains entries for instances of the route map clause + elements." + ::= { juniIpRouteMapTree 3 } + +juniIpRouteMapClauseEntry OBJECT-TYPE + SYNTAX JuniIpRouteMapClauseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry describes the characteristics of one route map clause + element instance." + INDEX { juniIpRouteMapV2Name, + juniIpRouteMapV2SequenceNum, + juniIpRouteMapClauseElemId, + juniIpRouteMapClauseSubElemId } + ::= { juniIpRouteMapClauseTable 1 } + +JuniIpRouteMapClauseEntry ::= SEQUENCE { + juniIpRouteMapClauseElemId INTEGER, + juniIpRouteMapClauseSubElemId Integer32, + juniIpRouteMapClauseElemIdAddon INTEGER, + juniIpRouteMapClauseElementValue DisplayString, + juniIpRouteMapClauseRowStatus RowStatus } + +juniIpRouteMapClauseElemId OBJECT-TYPE + SYNTAX INTEGER { + -- match clause element selection options + matchNotKnown(0), + matchAsPath(1), + matchCommunity(2), + matchExtendedCommunity(3), + matchDistance(4), + matchAccessList(5), + matchNextHop(6), + matchPrefixList(7), + matchNextHopPreList(8), + matchPrefixTree(9), + matchNextHopPreTree(10), + matchLevel(11), + matchMetric(12), + matchMetricType(13), + matchTag(14), + matchRouteType(15), + matchSource(16), + matchPolicyList(17), + -- set clause element selection options + setAsPath(100), + setAsPathCreateList(101), + setAutoTag(102), + setCommList(103), + setCommunityNone(104), + setCommunityAdd(105), + setCommunity(106), + setCommunityCreateListAdd(107), + setCommunityCreateList(108), + setExtendedCommunityCreateAdd(109), + setExtendedCommunityCreate(110), + setNextHop(111), + setNextHopPeerAddr(112), + setLocalPref(113), + setWeight(114), + setLevel(115), + setMetric(116), + setMetricType(117), + setTag(118), + setOrigin(119), + setRouteType(220), + setDampingCreate(221), + setDistance(222), + -- match-set clause element selection option + matchSetSummary(300) } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The clause element selection option. Select the appropriate element + option to configure each element instance of match, match-set and set + clauses. For the complete configuration map table refer to the + juniIpRouteMapClauseRowStatus object's DESCRIPTION." + ::= { juniIpRouteMapClauseEntry 1 } + +juniIpRouteMapClauseSubElemId OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The clause element sub ID used to distinguish specific instance of the + element. This value is determined by choosing the next available by + walking the table." + ::= { juniIpRouteMapClauseEntry 2 } + +juniIpRouteMapClauseElemIdAddon OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(0), + exact(1), + delete(2), + relativeNeg(3), + relativePos(4), + extCommRt(5), + extCommSoo(6), + interfaceValue(7), + ipAddress(8) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This represents clause element instance add-on option selected along + with the main option (juniIpRouteMapClauseElemId) whenever it applies. + For more information on how to map this object value to each value, + refer to the mapping table in the juniIpRouteMapClauseRowStatus object's + DESCRIPTION." + DEFVAL { notApplicable } + ::= { juniIpRouteMapClauseEntry 3 } + +juniIpRouteMapClauseElementValue OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..100)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This represents set, match-set and match clauses' different element + instance values in character string form. Whatever may be the data type + of the attribute element instance value, it is always interpreted as a + set of characters for both configuration and display purposes. It is up + to the user to know the element's data type mapping in order to input + the correct value while configuring. Refer to the mapping table in the + juniIpRouteMapClauseRowStatus object descrption for detailed + information." + ::= { juniIpRouteMapClauseEntry 4 } + +juniIpRouteMapClauseRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls creation/deletion of entries in this table according to the + RowStatus textual convention, constrained to support the following + values only: + createAndGo + destroy + + To create/delete an entry in this table, the following entry objects + MUST be explicitly configured: + juniIpRouteMapClauseElementValue + juniIpRouteMapClauseRowStatus + + Additional object juniIpRouteMapClauseElemIdAddon may become OPTIONAL + for some elements creation/deletion along with the above. Refer the + mapping table below to determine which elements are required. + + The table entry elements may not be modified. Only create and delete + are allowed. + + Note#1: Make sure route map(s) are created before configuring their + corresponding clause elements. + Note#2: The mapping table below is the extensive guide for the options, + values and ranges of the table objects + juniIpRouteMapClauseElemId, juniIpRouteMapClauseElemIdAddon and + juniIpRouteMapClauseElementValue. + + Clause element configuration selection mapping table + ==================================================== + ClauseElemId ClauseElemIdAddon ClauseElementValue + ============ ================= ================== + + matchAsPath notApplicable DisplayString (SIZE(1..32)) + matchCommunity exact/ DisplayString (SIZE(1..32)) + notApplicable + matchExtendedCommunity exact/ DisplayString (SIZE(1..32)) + notApplicable + + Note#3: At a given time only one can be configured for access list and + prefix-list/trees'. + matchAccessList notApplicable DisplayString (SIZE(1..32)) + matchPrefixList notApplicable DisplayString (SIZE(1..32)) + matchPrefixTree notApplicable DisplayString (SIZE(1..32)) + matchNextHop notApplicable DisplayString (SIZE(1..32)) + matchNextHopPreList notApplicable DisplayString (SIZE(1..32)) + matchNextHopPreTree notApplicable DisplayString (SIZE(1..32)) + + Note#4: For matchLevel, matchMetricType and matchRouteType element + selection choose the exact case-sensitive string to set the + option. + Example: For matchLevel, option levelOne, levelOneAndTwo, etc. + can be set. + matchLevel notApplicable { levelOne, + levelOneAndTwo, + levelTwo, + backbone, + stubArea } + matchMetricType notApplicable { internal or typeOne, + external or typeTwo } + matchRouteType notApplicable { external, + internal, + internalInter, + internalIntra } + + matchDistance notApplicable Integer32 (0..255) + matchMetric notApplicable Unsigned32 + matchTag notApplicable Unsigned32 + matchPolicyList notApplicable DisplayString (SIZE(1..32)) + + setAsPath notApplicable DisplayString (SIZE(1..32)) + setCommunityAdd notApplicable DisplayString (SIZE(1..32)) + setCommList delete/ DisplayString (SIZE(1..32)) + notApplicable + setCommunity notApplicable DisplayString (SIZE(1..32)) + + Note#5: For below elements selection choose the exact case-sensitive + string to set the option. + Example: For setOrigin, egp or igp or incomplete will be the + valid options to select. + setAutoTag notApplicable { autoTag } + setCommunityNone notApplicable { communityNone } + + Note#6: setCommunityCreateList and setCommunityCreateListAdd will have + only one instance and all will be set in one instance of the + element (either setCommunityCreateList or + setCommunityCreateListAdd), i.e., all options and values will + aggregate in one SubElementId. + setCommunityCreateList notApplicable Unsigned32 + setCommunityCreateListAdd notApplicable Unsigned32 + setCommunityCreateList notApplicable { none, + localAs, + noAdvertise, + noExport } + setCommunityCreateListAdd notApplicable { none, + localAs, + noAdvertise, + noExport } + + setLevel notApplicable { backbone, + levelOne, + levelOneAndTwo, + levelTwo, + stubArea } + setRouteType notApplicable { external, + internal, + internalInter, + internalIntra } + setNextHopPeerAddr notApplicable { peerAddress } + setMetricType notApplicable { external, + internal } + setOrigin notApplicable { egp, + igp, + incomplete } + + setAsPathCreateList notApplicable Interger32 (1..65535) + setTag notApplicable Unsigned32 + setWeight notApplicable Unsigned32 + setDistance notApplicable Interger32 (1..255) + setLocalPref notApplicable Unsigned32 + setMetric relativeNeg/ Unsigned32 + relativePos/ + notApplicable + + Note#7: setExtendedCommunityCreate and setExtendedCommunityCreateAdd + will have only one instance and all will be set in one instance + of the element (either setExtendedCommunityCreate or + setExtendedCommunityCreateAdd) i.e. all options and values will + aggregate in one SubElementId. + setExtendedCommunityCreate extCommRt/ IPADDRESS:Unsigned32 or + notApplicable IPADDRESS-in-ASN:Unsigned32 + setExtendedCommunityCreate extCommSoo/ IPADDRESS:Unsigned32 or + notApplicable IPADDRESS-in-ASN:Unsigned32 + setExtendedCommunityCreateAdd extCommRt/ IPADDRESS:Unsigned32 or + notApplicable IPADDRESS-in-ASN:Unsigned32 + setExtendedCommunityCreateAdd extCommSoo/ IPADDRESS:Unsigned32 + notApplicable IPADDRESS-in-ASN:Unsigned32 + + Note#8: Damping element has only one instance at any given time. It can + be deleted by just refering to the instance (elementID and + subElementId) without refering the exact value; i.e., while + deleting, values doesn't matter. + setDampingCreate notApplicable + 1. HalfLifeiTime-Interger32 (1..45) + 2. RtSuppressTime-Interger32 (1..20000) + 3. SuppressedRtReuseTime-Interger32 (1..20000) + 4. MaxRtSuppressTime-Interger32 (1..255) + 5. UnreachableRtHalfLifeTime-Interger32 (1..45) + Note#9: 1, 2, 3 and 4 values are MUST values to be specified (in + minutes) for route flap damping and 5th one is optional. Format + for specifying the values are very rigid and strict. Always + specify four MUST values. The first value shouldn't be preceded + with space characters and last the value always should be + followed with one space character. From first value to till + last value, all the values will be separated from each other by + one space character. + + setNextHop interfaceValue/ Unsigned32 + notApplicable + setNextHop ipAddress/ IPADDRESS + notApplicable " + ::= { juniIpRouteMapClauseEntry 5 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Notifications +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- No notifications are defined in this MIB. Placeholders follow. +-- juniIpPolicyTrapEnables OBJECT IDENTIFIER ::= { juniIpPolicyMIB 2 } +-- juniIpPolicyTraps OBJECT IDENTIFIER ::= { juniIpPolicyMIB 3 } +-- juniIpPolicyTrapPrefix OBJECT IDENTIFIER ::= { juniIpPolicyTraps 0 } + + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Conformance information +-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +juniIpPolicyConformance OBJECT IDENTIFIER ::= { juniIpPolicyMIB 4 } +juniIpPolicyCompliances OBJECT IDENTIFIER ::= { juniIpPolicyConformance 1 } +juniIpPolicyGroups OBJECT IDENTIFIER ::= { juniIpPolicyConformance 2 } + +-- +-- compliance statements +-- +juniIpPolicyCompliance MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "An obsolete compliance statement for entities that implement the + Juniper IP Policy MIB. This statement became obsolete when support was + added for the IP Named Access List." + MODULE -- this module + MANDATORY-GROUPS { + juniIpAccessListGroup } + ::= { juniIpPolicyCompliances 1 } -- JUNOSe 1.0 + +juniIpPolicyCompliance2 MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "An obsolete compliance statement for entities that implement the + Juniper IP Policy MIB. This statement became obsolete when support was + added for the IP ASP Access List, the IP Prefix List, the IP Prefix + Tree, the IP Community List, the IP Extended Community List, IP Dynamic + Route Redistribution, and the IP Route Map." + MODULE -- this module + MANDATORY-GROUPS { + juniIpAccessListGroup, + juniIpNamedAccessListGroup } + ::= { juniIpPolicyCompliances 2 } -- JUNOSe 2.0 + +juniIpPolicyCompliance3 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "An obsolete compliance statement for entities that implement the + Juniper IP Policy MIB. This statement became obsolete when support was + added for the IP Route Map configurations." + MODULE -- this module + MANDATORY-GROUPS { + juniIpAccessListGroup, + juniIpNamedAccessListGroup, + juniIpAspAccessListGroup, + juniIpPrefixListGroup, + juniIpPrefixTreeGroup, + juniIpCommunityListGroup, + juniIpExtCommunityListGroup, + juniIpRedistributeGroup, + juniIpRouteMapGroup } + ::= { juniIpPolicyCompliances 3 } -- JUNOSe 3.0 + +juniIpPolicyCompliance4 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities that implement the Juniper IP + Policy MIB." + MODULE -- this module + MANDATORY-GROUPS { + juniIpAccessListGroup, + juniIpNamedAccessListGroup, + juniIpAspAccessListGroup, + juniIpPrefixListGroup, + juniIpPrefixTreeGroup, + juniIpCommunityListGroup, + juniIpExtCommunityListGroup, + juniIpRedistributeGroup, + juniIpRouteMapGroup2 } + ::= { juniIpPolicyCompliances 4 } -- JUNOSe 5.1 + +-- +-- units of conformance +-- +juniIpAccessListGroup OBJECT-GROUP + OBJECTS { + juniIpAccessListRowStatus, + juniIpAccessListAction, + juniIpAccessListSrc, + juniIpAccessListSrcMask, + juniIpAccessListDst, + juniIpAccessListDstMask, + juniIpAccessListProtocol } + STATUS current + DESCRIPTION + "A collection of objects for managing IP access list capabilities in a + Juniper product." + ::= { juniIpPolicyGroups 1 } + +juniIpNamedAccessListGroup OBJECT-GROUP + OBJECTS { + juniIpNamedAccessListRowStatus, + juniIpNamedAccessListAction, + juniIpNamedAccessListSrc, + juniIpNamedAccessListSrcMask, + juniIpNamedAccessListDst, + juniIpNamedAccessListDstMask, + juniIpNamedAccessListProtocol } + STATUS current + DESCRIPTION + "A named collection of objects for managing IP access list capabilities + in a Juniper product." + ::= { juniIpPolicyGroups 2 } + +juniIpAspAccessListGroup OBJECT-GROUP + OBJECTS { + juniIpAspAccessCreatedInternally, + juniIpAspAccessPolicy, + juniIpAspAccessExpression, + juniIpAspAccessRowStatus } + STATUS current + DESCRIPTION + "A named collection of objects for managing AS-Path access list + capabilities in a Juniper product." + ::= { juniIpPolicyGroups 3 } + +juniIpPrefixListGroup OBJECT-GROUP + OBJECTS { + juniIpPrefixListPolicy, + juniIpPrefixListGeValue, + juniIpPrefixListLeValue, + juniIpPrefixListDescription, + juniIpPrefixListHitCount, + juniIpPrefixListRowStatus } + STATUS current + DESCRIPTION + "A named collection of objects for managing Prefix list capabilities in + a Juniper product." + ::= { juniIpPolicyGroups 4 } + +juniIpPrefixTreeGroup OBJECT-GROUP + OBJECTS { + juniIpPrefixTreePolicy, + juniIpPrefixTreeDescription, + juniIpPrefixTreeHitCount, + juniIpPrefixTreeRowStatus } + STATUS current + DESCRIPTION + "A named collection of objects for managing Prefix Tree capabilities in + a Juniper product." + ::= { juniIpPolicyGroups 5 } + +juniIpCommunityListGroup OBJECT-GROUP + OBJECTS { + juniIpCommunityListCreatedInternally, + juniIpCommunityListExtended, + juniIpCommunityListPolicy, + juniIpCommunityListExpression, + juniIpCommunityListRowStatus } + STATUS current + DESCRIPTION + "A named collection of objects for managing Community List capabilities + in a Juniper product." + ::= { juniIpPolicyGroups 6 } + +juniIpExtCommunityListGroup OBJECT-GROUP + OBJECTS { + juniIpExtCommunityListCreatedInternally, + juniIpExtCommunityListPolicy, + juniIpExtCommunityListExpression, + juniIpExtCommunityListRowStatus } + STATUS current + DESCRIPTION + "A named collection of objects for managing Extended Community List + capabilities in a Juniper product." + ::= { juniIpPolicyGroups 7 } + +juniIpRedistributeGroup OBJECT-GROUP + OBJECTS { + juniIpDynRedistributeState, + juniIpDynRedistributeRowStatus, + juniIpRedistributeState, + juniIpRedistributeRouteMapName, + juniIpRedistributeRowStatus } + STATUS current + DESCRIPTION + "A collection of objects for managing IP route redistribution list + capabilities in a Juniper product." + ::= { juniIpPolicyGroups 8 } + +juniIpRouteMapGroup OBJECT-GROUP + OBJECTS { + juniIpRouteMapCreatedInternally, + juniIpRouteMapPolicy, + juniIpRouteMapDisplay } + STATUS obsolete + DESCRIPTION + "A collection of objects for managing IP route map list capabilities in + a Juniper product." + ::= { juniIpPolicyGroups 9 } + +juniIpRouteMapGroup2 OBJECT-GROUP + OBJECTS { + juniIpRouteMapCreatedInternally, + juniIpRouteMapPolicy, + juniIpRouteMapDisplay, + juniIpRouteMapV2Policy, + juniIpRouteMapV2RowStatus, + juniIpRouteMapClauseElemIdAddon, + juniIpRouteMapClauseElementValue, + juniIpRouteMapClauseRowStatus } + STATUS current + DESCRIPTION + "A collection of objects for managing IP route map list capabilities in + a Juniper product." + ::= { juniIpPolicyGroups 10 } + +END |