diff options
Diffstat (limited to 'MIBS/ibm/IBM-OSA-MIB')
| -rw-r--r-- | MIBS/ibm/IBM-OSA-MIB | 2950 |
1 files changed, 2950 insertions, 0 deletions
diff --git a/MIBS/ibm/IBM-OSA-MIB b/MIBS/ibm/IBM-OSA-MIB new file mode 100644 index 0000000..ebc5006 --- /dev/null +++ b/MIBS/ibm/IBM-OSA-MIB @@ -0,0 +1,2950 @@ + --===================================================================
+ --
+ -- May 23, 2002
+ --
+ -- Joel Goldman, Internet: jgoldman@us.ibm.com
+ -- IBM Server Group
+ -- Poughkeepsie, NY
+ --
+ -- Program name : IBM OSA-Express Direct SNMP Enterprise
+ -- Specific MIB ASN.1 Description file
+ --
+ -- SW Requires: IBM Communications Server for z/OS Version 1 Release 4
+ -- -or-
+ -- Linux ucd-snmp 4.2.x package
+ -- IBM OSA-Express device driver QETH (Rev. 1.239 or higher)
+ -- IBM osasnmpd subagent Ver. 1.1 or higher
+ --
+ -- HW Requires: OSA-Express running in QDIO mode with
+ -- Licensed Internal Code level 3.0A or higher
+ --
+ -- Description: Manages the IBM Open Systems Adapter Express CHPID
+ -- Enterprise Specific MIB
+ --
+ -- Latest MIB: Located at website
+ -- www.ibm.com/servers/resourcelink
+ -- logon on to Resourcelink
+ -- select "Library"
+ -- look to the right side under "Library short cuts" and select "OSA"
+ -- select the "OSA-Express Direct SNMP MIB module"
+ --
+ --===================================================================
+
+ IBM-OSA-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE,
+-- NOTIFICATION-TYPE, IpAddress, TimeTicks, Unsigned32
+ enterprises, Integer32, Gauge32, Counter32, Counter64
+ FROM SNMPv2-SMI -- RFC2578
+
+-- TEXTUAL-CONVENTION, DateAndTime, TruthValue, RowStatus,
+ DisplayString
+ FROM SNMPv2-TC -- RFC2579
+
+-- NOTIFICATION-GROUP
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF -- RFC2580
+
+-- SnmpAdminString
+-- FROM SNMP-FRAMEWORK-MIB
+-- RFC2571
+
+ ifIndex
+ FROM IF-MIB -- RFC2863
+ ;
+
+
+ ibmOSAMib MODULE-IDENTITY
+ LAST-UPDATED "200205230000Z"
+ ORGANIZATION "IBM eServer Development"
+ CONTACT-INFO
+ " Joel Goldman
+
+ Postal: International Business Machines Corporation
+ 2455 South Road
+ Dept. B44G/Bldg. 706
+ Poughkeepsie, NY 12601
+ USA
+
+ Tel: +1 845 435 5501
+
+ Internet: jgoldman@us.ibm.com"
+ DESCRIPTION
+ "The IBM Enterprise Specific MIB definitions for
+ enabling management of an IBM OSA-Express feature.
+
+ Licensed Materials - Property of IBM
+ Restricted Materials of IBM
+ 5694-A01 (C) Copyright IBM Corp. 2002
+ US Government Users Restricted Rights -
+ Use, duplication or disclosure restricted by
+ GSA ADP Schedule Contract with IBM Corp."
+ REVISION "200205230000Z"
+ DESCRIPTION
+ "Editorial revisions"
+ REVISION "200203260800Z"
+ DESCRIPTION
+ "Initial release"
+ ::= { ibmProd 188 }
+
+ ibm OBJECT IDENTIFIER ::= { enterprises 2 }
+ ibmProd OBJECT IDENTIFIER ::= { ibm 6 }
+
+-- ibmOSAMibTraps OBJECT IDENTIFIER ::= { ibmOSAMib 0 }
+ibmOSAMibObjects OBJECT IDENTIFIER ::= { ibmOSAMib 1 }
+ibmOSAMibConformance OBJECT IDENTIFIER ::= { ibmOSAMib 2 }
+ --===================================================================
+ -- IbmOSAMib
+ --===================================================================
+
+ -- IbmOSAExpChannelTable
+
+ ibmOSAExpChannelTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IbmOSAExpChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indexed by ifIndex. One entry in this table will exist per
+ OSA Device Interface."
+ ::= { ibmOSAMibObjects 1 }
+
+ ibmOSAExpChannelEntry OBJECT-TYPE
+ SYNTAX IbmOSAExpChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Definition of a single entry in the ibmOSAExpChannelTable.
+ Indexed by the ifIndex of the corresponding Device interface."
+ INDEX { ifIndex }
+ ::= { ibmOSAExpChannelTable 1 }
+
+ IbmOSAExpChannelEntry ::=
+ SEQUENCE
+ {
+ ibmOSAExpChannelNumber OCTET STRING,
+ ibmOSAExpChannelType INTEGER,
+ ibmOSAExpChannelHdwLevel INTEGER,
+ ibmOSAExpChannelSubType INTEGER,
+ ibmOSAExpChannelShared INTEGER,
+ ibmOSAExpChannelNodeDesc OCTET STRING,
+ ibmOSAExpChannelProcCodeLevel OCTET STRING,
+ ibmOSAExpChannelPCIBusUtil1Min Integer32,
+ ibmOSAExpChannelProcUtil1Min Integer32,
+ ibmOSAExpChannelPCIBusUtil5Min Integer32,
+ ibmOSAExpChannelProcUtil5Min Integer32,
+ ibmOSAExpChannelPCIBusUtilHour Integer32,
+ ibmOSAExpChannelProcUtilHour Integer32
+ }
+
+ ibmOSAExpChannelNumber OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(2))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The CHPID corresponding to this ifIndex."
+ ::= { ibmOSAExpChannelEntry 1 }
+
+ ibmOSAExpChannelType OBJECT-TYPE
+ SYNTAX INTEGER {
+ osaDirectExpress (17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of channel for this interface.
+ OSA Direct Express has a value of 17."
+ ::= { ibmOSAExpChannelEntry 2 }
+
+
+ ibmOSAExpChannelHdwLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ osaExp150(2),
+ osaExp175(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hardware model of the channel.
+ The value oasExp150(2) indicates a hardware level of 1.50.
+ The value oasExp175(3) indicates a hardware level of 1.75."
+ ::= { ibmOSAExpChannelEntry 3 }
+
+ ibmOSAExpChannelSubType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ unknown (1),
+ gigabitEthernet (65),
+ fastEthernet (81),
+ tokenRing (82),
+ atmEmulatedEthernet (2304)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the type of OSA feature present."
+ ::= { ibmOSAExpChannelEntry 4 }
+
+
+ ibmOSAExpChannelShared OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notShared (0),
+ shared (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An OSA-Express feature can be shared across multiple LPs.
+ This object indicates if this feature is currently being
+ shared between LPs"
+ ::= { ibmOSAExpChannelEntry 5 }
+
+
+ ibmOSAExpChannelNodeDesc OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the Node Descriptor of the OSA feature.
+ It represents the ND obtained from the Channel Subsystem.
+
+ Bits Name Flag is first byte
+ char(1) Validity Valid - always '20'x
+ char(1) Reserved Reserved by architecture
+ char(1) Class Class for subsystem node
+ char(1) CHPID CHP ID for specified int
+ char(6) TypeNum Type number of the SDC
+ char(3) ModelNum Model number in the form of 3
+ EBCDIC OCTETS
+ char(3) Manufacturer Manufacturer in the form of 3
+ EBCDIC OCTETS
+ char(2) Mfr Plant Plant of manufacture-2 digit code
+ char(12)SeqNum Sequence number (12 EBCDIC OCTETS)
+ char(2) Tag Tag"
+ ::= { ibmOSAExpChannelEntry 6 }
+
+
+ ibmOSAExpChannelProcCodeLevel OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(2))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the firmware (or micro code level) of the OSA
+ feature. For example, OSA code level 05.6A would be
+ represented as 0x056A."
+ ::= { ibmOSAExpChannelEntry 8 }
+
+ ibmOSAExpChannelPCIBusUtil1Min OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average, over a 1 minute interval, of the percentage
+ of time that the PCI bus was utilized to transfer data.
+ It does not include idle time or time used by
+ routine maintenance tasks. The range for this value
+ is from 0 to 100%."
+ ::= { ibmOSAExpChannelEntry 9 }
+
+ ibmOSAExpChannelProcUtil1Min OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average, over a 1 minute interval, of the percentage
+ of time that the CHPID Processor was utilized to transfer
+ data. It does not include idle time or time used by
+ routine maintenance tasks. The range for this value
+ is from 0 to 100%."
+ ::= { ibmOSAExpChannelEntry 10 }
+
+ ibmOSAExpChannelPCIBusUtil5Min OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average, over a 5 minute interval, of the percentage
+ of time that the PCI bus was utilized to transfer data.
+ It does not include idle time or time used by
+ routine maintenance tasks. The range for this value
+ is from 0 to 100%."
+ ::= { ibmOSAExpChannelEntry 11 }
+
+ ibmOSAExpChannelProcUtil5Min OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average, over a 5 minute interval, of the percentage
+ of time that the CHPID Processor was utilized to transfer
+ data. It does not include idle time or time used by
+ routine maintenance tasks. The range for this value
+ is from 0 to 100%."
+ ::= { ibmOSAExpChannelEntry 12 }
+
+ ibmOSAExpChannelPCIBusUtilHour OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average, over an hour interval, of the percentage
+ of time that the PCI bus was utilized to transfer data.
+ It does not include idle time or time used by
+ routine maintenance tasks."
+ ::= { ibmOSAExpChannelEntry 13 }
+
+ ibmOSAExpChannelProcUtilHour OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average, over an hour interval, of the percentage
+ of time that the CHPID Processor was utilized to transfer
+ data. It does not include idle time or time used by
+ routine maintenance tasks. The range for this value
+ is from 0 to 100%."
+ ::= { ibmOSAExpChannelEntry 14 }
+
+
+
+ -- ibmOSAExpPerfTable
+
+ ibmOSAExpPerfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IbmOSAExpPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides performance information for each
+ Logical Partition (LP) the OSA can connect to."
+ ::= { ibmOSAMibObjects 2 }
+
+ ibmOSAExpPerfEntry OBJECT-TYPE
+ SYNTAX IbmOSAExpPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Definition of a single entry for a single LP
+ in the ibmOSAExpPerfTable.
+ Indexed by the ifIndex of the corresponding Device interface."
+ INDEX { ifIndex }
+ ::= { ibmOSAExpPerfTable 1 }
+
+ IbmOSAExpPerfEntry ::=
+ SEQUENCE
+ {
+ ibmOSAExpPerfDataLP0 OCTET STRING,
+ ibmOSAExpPerfDataLP1 OCTET STRING,
+ ibmOSAExpPerfDataLP2 OCTET STRING,
+ ibmOSAExpPerfDataLP3 OCTET STRING,
+ ibmOSAExpPerfDataLP4 OCTET STRING,
+ ibmOSAExpPerfDataLP5 OCTET STRING,
+ ibmOSAExpPerfDataLP6 OCTET STRING,
+ ibmOSAExpPerfDataLP7 OCTET STRING,
+ ibmOSAExpPerfDataLP8 OCTET STRING,
+ ibmOSAExpPerfDataLP9 OCTET STRING,
+ ibmOSAExpPerfDataLP10 OCTET STRING,
+ ibmOSAExpPerfDataLP11 OCTET STRING,
+ ibmOSAExpPerfDataLP12 OCTET STRING,
+ ibmOSAExpPerfDataLP13 OCTET STRING,
+ ibmOSAExpPerfDataLP14 OCTET STRING,
+ ibmOSAExpPerfDataLP15 OCTET STRING
+ }
+
+ ibmOSAExpPerfDataLP0 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 0.
+ The 40 bytes of hex data that are returned are decoded
+ as follows:
+ Offset Bytes Field Meaning
+ 0 4 LP Number
+ 4 4 Processor Util 1 Minute
+ 8 4 In Kbytes Rate 1 Minute
+ 12 4 Out Kbytes Rate 1 Minute
+ 16 4 Processor Util 5 Minutes
+ 20 4 In Kbytes Rate 5 Minutes
+ 24 4 Out Kbytes Rate 5 Minutes
+ 28 4 Processor Util 60 Minutes
+ 32 4 In Kbytes Rate 60 Minutes
+ 36 4 Out Kbytes Rate 60 Minutes
+
+ The Processor Util 1 Minute is defined as follows:
+ The average, over a 1 minute interval, of the percentage
+ of time that the CHPID Processor was utilized to
+ transfer data for a specific LP. It does not include
+ idle time or time used by routine maintenance tasks.
+ The range for this value is from 0 to 100%.
+
+ The In Kbytes Rate 1 Minute is defined as follows:
+ The average, over a 1 minute interval, of the number of
+ inbound kilobytes processed for a specific LP.
+
+ The Out Kbytes Rate 1 Minute is defined as follows:
+ The average, over a 1 minute interval, of the number of
+ outbound kilobytes processed for a specific LP.
+
+ The 5 and 60 minute fields are defined similar to the
+ 1 minute fields, but pertain to intervals of 5 and 60
+ minutes."
+ ::= { ibmOSAExpPerfEntry 1 }
+
+ ibmOSAExpPerfDataLP1 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 1.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 2 }
+
+ ibmOSAExpPerfDataLP2 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 2.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 3 }
+
+ ibmOSAExpPerfDataLP3 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 3.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 4 }
+
+ ibmOSAExpPerfDataLP4 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 4.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 5 }
+
+ ibmOSAExpPerfDataLP5 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 5.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 6 }
+
+ ibmOSAExpPerfDataLP6 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 6.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 7 }
+
+ ibmOSAExpPerfDataLP7 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 7.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 8 }
+
+ ibmOSAExpPerfDataLP8 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 8.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 9 }
+
+ ibmOSAExpPerfDataLP9 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 9.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 10 }
+
+ ibmOSAExpPerfDataLP10 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 10.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 11 }
+
+ ibmOSAExpPerfDataLP11 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 11.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 12 }
+
+ ibmOSAExpPerfDataLP12 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 12.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 13 }
+
+ ibmOSAExpPerfDataLP13 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 13.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 14 }
+
+ ibmOSAExpPerfDataLP14 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 14.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 15 }
+
+ ibmOSAExpPerfDataLP15 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(40))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The performance data on this OSA for partition 15.
+ The 40 bytes of hex data that are returned are decoded
+ the same as for partition 0."
+ ::= { ibmOSAExpPerfEntry 16 }
+
+
+ -- PE MIB Table starts here. This is for IBM use.
+
+ -- ibmOSAExpPETable
+
+ ibmOSAExpPETable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IbmOSAExpPEEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table provides PE information to help IBM diagnose any
+ OSA problems."
+ ::= { ibmOSAMibObjects 3 }
+
+ ibmOSAExpPEEntry OBJECT-TYPE
+ SYNTAX IbmOSAExpPEEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Definition of a single entry in the ibmOSAExpPETable.
+ Indexed by the ifIndex of the corresponding Device interface"
+ INDEX { ifIndex }
+ ::= { ibmOSAExpPETable 1 }
+
+ IbmOSAExpPEEntry ::=
+ SEQUENCE
+ {
+ ibmOSAExpPEMaxSizeArpCache Integer32,
+ ibmOSAExpPEArpPendingEntries Gauge32,
+ ibmOSAExpPEArpActiveEntries Gauge32,
+ ibmOSAExpPEIPEntries Gauge32,
+ ibmOSAExpPEMulticastEntries Gauge32,
+ ibmOSAExpPEMulticastData OCTET STRING
+ }
+
+ ibmOSAExpPEMaxSizeArpCache OBJECT-TYPE
+ SYNTAX Integer32 (0..214783647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum size of the OSA ARP Cache"
+ ::= { ibmOSAExpPEEntry 1 }
+
+ ibmOSAExpPEArpPendingEntries OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of Pending entries in the ARP cache."
+ ::= { ibmOSAExpPEEntry 2 }
+
+ ibmOSAExpPEArpActiveEntries OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This the number of active ARP entries."
+ ::= { ibmOSAExpPEEntry 3 }
+
+ ibmOSAExpPEIPEntries OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of IP addresses known to the OSA
+ For OSD chpids, this is the maximum # of IP addresses
+ that are:
+ - home ip addresses (Version 4 and Version 6)
+ - remote ip addresses in the arp cache (Version 4 only)
+ - multicast ip addresses that the OSA must accept inbound
+ data packets for (Version 4 and Version 6)"
+ ::= { ibmOSAExpPEEntry 4 }
+
+ ibmOSAExpPEMulticastEntries OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of IP multicast addresses currently
+ on the OSA"
+ ::= { ibmOSAExpPEEntry 5 }
+
+
+ ibmOSAExpPEMulticastData OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(3360))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This contains information on the multicast entries that
+ are currently on the OSA. These are in a format that is
+ for IBM use only"
+ ::= { ibmOSAExpPEEntry 6 }
+
+
+ -- ibmOSAExpEthPortTable
+
+ ibmOSAExpEthPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IbmOSAExpEthPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table represents the data associated with a port on an
+ OSA-Express Gigabit or Fast Ethernet OSA."
+ ::= { ibmOSAMibObjects 4 }
+
+ ibmOSAExpEthPortEntry OBJECT-TYPE
+ SYNTAX IbmOSAExpEthPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Definition of a single entry in the ibmOSAExpEthPortTable.
+ Indexed by the ifIndex of the corresponding Device interface."
+ INDEX { ifIndex }
+ ::= { ibmOSAExpEthPortTable 1 }
+
+ IbmOSAExpEthPortEntry ::=
+ SEQUENCE
+ {
+ ibmOsaExpEthPortNumber Integer32,
+ ibmOsaExpEthPortType INTEGER,
+ ibmOsaExpEthLanTrafficState INTEGER,
+ ibmOsaExpEthServiceMode INTEGER,
+ ibmOsaExpEthDisabledStatus BITS,
+ ibmOsaExpEthConfigName DisplayString,
+ ibmOsaExpEthConfigSpeedMode INTEGER,
+ ibmOsaExpEthActiveSpeedMode INTEGER,
+ ibmOsaExpEthMacAddrActive OCTET STRING,
+ ibmOsaExpEthMacAddrBurntIn OCTET STRING,
+ ibmOsaExpEthUserData DisplayString,
+ ibmOsaExpEthOutPackets Counter32,
+ ibmOsaExpEthInPackets Counter32,
+ ibmOsaExpEthInGroupFrames Counter32,
+ ibmOsaExpEthInBroadcastFrames Counter32,
+ ibmOsaExpEthPortName DisplayString,
+ ibmOsaExpEthInUnknownIPFrames Counter32,
+ ibmOsaExpEthGroupAddrTable OCTET STRING
+ }
+
+
+ ibmOsaExpEthPortNumber OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical port number for this port."
+ ::= { ibmOSAExpEthPortEntry 1 }
+
+ ibmOsaExpEthPortType OBJECT-TYPE
+ SYNTAX INTEGER {
+ gigabitEthernet (65),
+ fastEthernet (81)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical port type."
+ ::= { ibmOSAExpEthPortEntry 2 }
+
+ ibmOsaExpEthLanTrafficState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ undefined(0),
+ unavailable(1),
+ enabling(2),
+ disabling(3),
+ enabled(4),
+ disabled(5),
+ linkMonitor(6),
+ definitionError(7),
+ configuredOffline(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LAN state value ranges from 0 to 8. A value of 5,
+ disabled is further explained in object
+ ibmOsaExpEthDisabledStatus."
+
+ ::= { ibmOSAExpEthPortEntry 3 }
+
+ ibmOsaExpEthServiceMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notInServiceMode (0),
+ inServiceMode (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates if the processor is in service mode
+ or not."
+ ::= { ibmOSAExpEthPortEntry 4 }
+
+ ibmOsaExpEthDisabledStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ reserved0 (0),
+ internalPortFailure (1),
+ reserved2 (2),
+ reserved3 (3),
+ reserved4 (4),
+ reserved5 (5),
+ portTemporarilyDisabled (6),
+ reserved7 (7),
+ reserved8 (8),
+ serviceProcessorRequest (9),
+ networkRequest (10),
+ osasfRequest (11),
+ configurationChange (12),
+ linkFailureThresholdExceeded (13),
+ reserved14 (14),
+ reserved15 (15)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When the value of ibmOsaExpEthLanTrafficState is
+ NOT disabled, the value of this object will be zero.
+
+ When the value of ibmOsaExpEthLanTrafficState is
+ disabled(5), this object explains the reason for the
+ disabled state. The value for this object may be a
+ combination of the bits shown."
+ ::= { ibmOSAExpEthPortEntry 5 }
+
+ ibmOsaExpEthConfigName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..34))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the name of the configuration that is on the OSA.
+ It is set using OSA/SF. It is not used by OSA"
+ ::= { ibmOSAExpEthPortEntry 6 }
+
+ ibmOsaExpEthConfigSpeedMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notValidGigabit (-1),
+ autoNegotiate (0),
+ tenMbHalfDuplex (1),
+ tenMbFullDuplex (2),
+ oneHundredMbHalfDuplex (3),
+ oneHundredMbFullDuplex (4),
+ oneThousandMbFullDuplex (6)
+ }
+ UNITS "Megabits per second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The configured port speed. This field shows the speed
+ that was configured by the user for the OSA-Express
+ Fast Ethernet feature.
+ It is not used by OSA-Express Gigabit features
+ and will return -1 (FFFF)"
+ ::= { ibmOSAExpEthPortEntry 7 }
+
+ ibmOsaExpEthActiveSpeedMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ unknown (0),
+ tenMbHalfDuplex (1),
+ tenMbFullDuplex (2),
+ oneHundredMbHalfDuplex (3),
+ oneHundredMbFullDuplex (4),
+ oneThousandMbFullDuplex (6)
+ }
+ UNITS "Megabits per second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual speed and mode the OSA is running in"
+ ::= { ibmOSAExpEthPortEntry 8 }
+
+
+ ibmOsaExpEthMacAddrActive OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 6 byte OCTET STRING which contains the current
+ MAC address in use on the adapter.
+ The values are in canonical format."
+ ::= { ibmOSAExpEthPortEntry 9 }
+
+ ibmOsaExpEthMacAddrBurntIn OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 6 byte OCTET STRING which contains the burned in
+ MAC address on the OSA.
+ The values are in canonical format."
+ ::= { ibmOSAExpEthPortEntry 10 }
+
+
+ ibmOsaExpEthUserData OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Data set by the user. It is ignored by the OSA."
+ ::= { ibmOSAExpEthPortEntry 11 }
+
+
+ ibmOsaExpEthOutPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of packets that have been transmitted
+ by the OSA since the last time the OSA port was reset"
+ ::= { ibmOSAExpEthPortEntry 12 }
+
+
+ ibmOsaExpEthInPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of packets that have been received
+ by the OSA since the last time the OSA port was reset"
+ ::= { ibmOSAExpEthPortEntry 13 }
+
+ ibmOsaExpEthInGroupFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of multicast frames that have been
+ received by the OSA."
+ ::= { ibmOSAExpEthPortEntry 14 }
+
+ ibmOsaExpEthInBroadcastFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of broadcast frames that have been
+ received by the OSA."
+ ::= { ibmOSAExpEthPortEntry 15 }
+
+
+ ibmOsaExpEthPortName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the port as used by TCP/IP"
+ ::= { ibmOSAExpEthPortEntry 16 }
+
+ ibmOsaExpEthInUnknownIPFrames OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of non-IP received frames"
+ ::= { ibmOSAExpEthPortEntry 17 }
+
+
+ ibmOsaExpEthGroupAddrTable OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field contains the active Group Addresses.
+ An individual Group Address is 6 bytes long with an
+ additional 2 bytes of padding. There are 32 group
+ addresses."
+ ::= { ibmOSAExpEthPortEntry 18 }
+
+
+ -- ibmOSAExpTRPortTable
+
+ ibmOSAExpTRPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IbmOSAExpTRPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table represents the data associated with a port on an
+ OSA-Express token ring feature."
+ ::= { ibmOSAMibObjects 5 }
+
+ ibmOSAExpTRPortEntry OBJECT-TYPE
+ SYNTAX IbmOSAExpTRPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Definition of a single entry in the ibmOSAExpTRPortTable.
+ Indexed by the ifIndex of the corresponding Device interface."
+ INDEX { ifIndex }
+ ::= { ibmOSAExpTRPortTable 1 }
+
+ IbmOSAExpTRPortEntry ::=
+ SEQUENCE
+ {
+ ibmOsaExpTRPortNumber Integer32,
+ ibmOsaExpTRPortType INTEGER,
+ ibmOsaExpTRLanTrafficState INTEGER,
+ ibmOsaExpTRServiceMode INTEGER,
+ ibmOsaExpTRDisabledStatus BITS,
+ ibmOsaExpTRConfigName DisplayString,
+ ibmOsaExpTRMacAddrActive OCTET STRING,
+ ibmOsaExpTRMacAddrBurntIn OCTET STRING,
+ ibmOsaExpTRConfigSpeedMode INTEGER,
+ ibmOsaExpTRActiveSpeedMode INTEGER,
+ ibmOsaExpTRUserData DisplayString,
+ ibmOsaExpTRPortName DisplayString,
+ ibmOsaExpTRGroupAddrTable OCTET STRING,
+ ibmOsaExpTRFunctionalAddr OCTET STRING,
+ ibmOsaExpTRRingStatus BITS,
+ ibmOsaExpTRAllowAccessPriority Integer32,
+ ibmOsaExpTREarlyTokenRelease INTEGER,
+ ibmOsaExpTRBeaconingAddress OCTET STRING,
+ ibmOsaExpTRUpstreamNeighbor OCTET STRING,
+ ibmOsaExpTRRingState INTEGER,
+ ibmOsaExpTRRingOpenStatus INTEGER,
+ ibmOsaExpTRPacketsTransmitted Counter32,
+ ibmOsaExpTRPacketsReceived Counter32,
+ ibmOsaExpTRLineErrorCount Counter32,
+ ibmOsaExpTRBurstErrorCount Counter32,
+ ibmOsaExpTRACErrorCount Counter32,
+ ibmOsaExpTRAbortTransErrorCount Counter32,
+ ibmOsaExpTRInternalErrorCount Counter32,
+ ibmOsaExpTRLostFrameErrorCount Counter32,
+ ibmOsaExpTRRcvCongestionCount Counter32,
+ ibmOsaExpTRFrameCopyErrorCount Counter32,
+ ibmOsaExpTRTokenErrorCount Counter32,
+ ibmOsaExpTRFullDuplexErrorCount Counter32,
+ ibmOsaExpTRSoftErrorCount Counter32,
+ ibmOsaExpTRHardErrorCount Counter32,
+ ibmOsaExpTRSignalLossErrorCount Counter32,
+ ibmOsaExpTRTransmitBeaconCount Counter32,
+ ibmOsaExpTRRecoveryCounter Counter32,
+ ibmOsaExpTRLobeWireFaultCount Counter32,
+ ibmOsaExpTRRemoveReceivedCount Counter32,
+ ibmOsaExpTRSingleStationCount Counter32
+ }
+
+ ibmOsaExpTRPortNumber OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical port number for this port."
+ ::= { ibmOSAExpTRPortEntry 1 }
+
+
+ ibmOsaExpTRPortType OBJECT-TYPE
+ SYNTAX INTEGER {
+ tokenring(82)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical port type."
+ ::= { ibmOSAExpTRPortEntry 2 }
+
+ ibmOsaExpTRLanTrafficState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ undefined(0),
+ unavailable(1),
+ enabling(2),
+ disabling(3),
+ enabled(4),
+ disabled(5),
+ linkMonitor(6),
+ definitionError(7),
+ configuredOffline(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LAN state value ranges from 0 to 8. A value of 5,
+ disabled is further explained in object
+ ibmOsaExpTRDisabledStatus"
+ ::= { ibmOSAExpTRPortEntry 3 }
+
+ ibmOsaExpTRServiceMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notInServiceMode (0),
+ inServiceMode (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates if the processor is in service mode
+ or not."
+ ::= { ibmOSAExpTRPortEntry 4 }
+
+ ibmOsaExpTRDisabledStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ reserved0 (0),
+ internalPortFailure (1),
+ reserved2 (2),
+ reserved3 (3),
+ reserved4 (4),
+ reserved5 (5),
+ portTemporarilyDisabled (6),
+ reserved7 (7),
+ reserved8 (8),
+ serviceProcessorRequest (9),
+ networkRequest (10),
+ osasfRequest (11),
+ configurationChange (12),
+ linkFailureThresholdExceeded (13),
+ reserved14 (14),
+ reserved15 (15)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When the value of ibmOsaExpTRLanTrafficState is
+ NOT disabled, the value of this object will be zero.
+
+ When the value of ibmOsaExpTRLanTrafficState is
+ disabled(5), this object explains the reason for the
+ disabled state. The value for this object may be a
+ combination of the bits shown."
+ ::= { ibmOSAExpTRPortEntry 5 }
+
+ ibmOsaExpTRConfigName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..34))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the name of the configuration that is on the OSA.
+ It is set using OSA/SF. It is not used by OSA"
+ ::= { ibmOSAExpTRPortEntry 6 }
+
+ ibmOsaExpTRMacAddrActive OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 6 byte OCTET STRING which contains the current
+ MAC address in use on the OSA."
+ ::= { ibmOSAExpTRPortEntry 7 }
+
+ ibmOsaExpTRMacAddrBurntIn OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 6 byte OCTET STRING which contains the burned in
+ MAC address on the OSA"
+ ::= { ibmOSAExpTRPortEntry 8 }
+
+
+ ibmOsaExpTRConfigSpeedMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ autoNegotiate (0),
+ fourMbHalfDuplex (1),
+ fourMbFullDuplex (2),
+ sixteenMbHalfDuplex (3),
+ sixteenMbFullDuplex (4),
+ oneHundredMbFullDuplex (6)
+ }
+ UNITS "Megabits per second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The configured port speed. This field shows the speed
+ that was configured by the user for the OSA-Express
+ Token Ring feature."
+ ::= { ibmOSAExpTRPortEntry 9 }
+
+ ibmOsaExpTRActiveSpeedMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ unknown (0),
+ fourMbHalfDuplex (1),
+ fourMbFullDuplex (2),
+ sixteenMbHalfDuplex (3),
+ sixteenMbFullDuplex (4),
+ oneHundredMbFullDuplex (6)
+ }
+ UNITS "Megabits per second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual speed and mode the OSA is running in"
+ ::= { ibmOSAExpTRPortEntry 10 }
+
+
+ ibmOsaExpTRUserData OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Data set by the user. It is ignored by the OSA."
+ ::= { ibmOSAExpTRPortEntry 11 }
+
+
+ ibmOsaExpTRPortName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the port as used by TCP/IP"
+ ::= { ibmOSAExpTRPortEntry 12 }
+
+ ibmOsaExpTRGroupAddrTable OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field contains the active Group Addresses.
+ An individual Group Address is 6 bytes long with an
+ additional 2 bytes of padding."
+ ::= { ibmOSAExpTRPortEntry 13 }
+
+
+ ibmOsaExpTRFunctionalAddr OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(4))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 4 byte OCTET STRING which contains the OSA-Express's
+ functional address."
+ ::= { ibmOSAExpTRPortEntry 14 }
+
+
+ ibmOsaExpTRRingStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ reserved0 (0),
+ reserved1 (1),
+ reserved2 (2),
+ reserved3 (3),
+ reserved4 (4),
+ reserved5 (5),
+ reserved6 (6),
+ reserved7 (7),
+ reserved8 (8),
+ reserved9 (9),
+ reserved10 (10),
+ reserved11 (11),
+ reserved12 (12),
+ reserved13 (13),
+ noStatusOpenNotCompleted (14),
+ reserved15 (15),
+ signalLoss (16),
+ hardError (17),
+ softError (18),
+ reserved19 (19),
+ lobeWireFault (20),
+ autoRemovalError (21),
+ fdxProtocol (22),
+ removeReceived (23),
+ counterOverflow (24),
+ singleStation (25),
+ ringRecovery (26),
+ sRCounterOverflow (27),
+ reserved29 (28),
+ openInFDXmode (29),
+ fourMbFullDuplex (30),
+ fourMbHalfDuplex (31)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current interface status which can be used to diagnose
+ fluctuating problems that can occur on token rings after a
+ station has successfully been added to the ring.
+ Before an open is completed, this object has the value
+ for the 'noStatusOpenNotCompleted' condition.
+ The ibmOsaExpTRRingState and ibmOsaExpTRRingOpenStatus
+ objects provide for debugging problems when the station
+ can not even enter the ring.
+
+ The object's value is a sum of values,
+ one for each currently applicable condition.
+ This information is essentially from RFC 1231."
+ ::= { ibmOSAExpTRPortEntry 15 }
+
+
+ ibmOsaExpTRAllowAccessPriority OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field contains the maximum token priority
+ the ring station defined by this entry in the
+ table is permitted to transmit."
+ ::= { ibmOSAExpTRPortEntry 16 }
+
+ ibmOsaExpTREarlyTokenRelease OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ true(0),
+ false(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates if the ring station supports early token release.
+ Only valid when port is running in 16Mb half duplex mode.
+ Otherwise it is always set to false (1)"
+ ::= { ibmOSAExpTRPortEntry 17 }
+
+
+ ibmOsaExpTRBeaconingAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field contains the node address of the NAUN as
+ reported in the most recently received Beacon MAC frame.
+ This field is valid when ibmOsaExpTRRingOpenStatus is
+ set to beaconing. Otherwise it is ignored"
+ ::= { ibmOSAExpTRPortEntry 18 }
+
+
+ ibmOsaExpTRUpstreamNeighbor OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The MAC-address of the up stream neighbor station in
+ the ring (NAUN)."
+ ::= { ibmOSAExpTRPortEntry 19 }
+
+
+ ibmOsaExpTRRingState OBJECT-TYPE
+ SYNTAX INTEGER {
+ opened (1),
+ closed (2),
+ opening (3),
+ closing (4),
+ openFailure (5),
+ ringFailure (6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current interface state with respect
+ to entering or leaving the ring."
+ ::= { ibmOSAExpTRPortEntry 20 }
+
+
+ ibmOsaExpTRRingOpenStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ noOpen (1),
+ badParameter (2),
+ lobeFailed (3),
+ signalLoss (4),
+ insertionTimeout (5),
+ ringFailed (6),
+ beaconing (7),
+ duplicateMAC (8),
+ requestFailed (9),
+ removeReceived (10),
+ open (11),
+ sARecFrameNotEqualNAUNs (12),
+ claimTokenRec (13),
+ ringPurgeFramRec (14),
+ activeMonPresRec (15),
+ standbyMonPresRec (16),
+ accessProtocolDenied (17),
+ fDXInsDeniedDACfailOnOpen (18),
+ fDXInsDeniedDACfailOnBeaconTest (19),
+ beaconBeforeOpen (20),
+ insertTimerExpDuringDAC (21),
+ insertTimerExpDuringBeaconTest (22),
+ lobeMedizTestFailure (23),
+ heartbeatFailBeforeOpenCompleted (24),
+ heartbeatFailDuringBeaconTest (25),
+ recBeaconFrameWithInvalidSA (26)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the success, or the reason for failure
+ of the station's most recent attempt to enter the ring."
+ ::= { ibmOSAExpTRPortEntry 21 }
+
+
+ ibmOsaExpTRPacketsTransmitted OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field contains the count of the total number of packets
+ transmitted from this port since the OSA port was reset"
+ ::= { ibmOSAExpTRPortEntry 22 }
+
+
+ ibmOsaExpTRPacketsReceived OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field contains the count of the total number of
+ packets received by this port since the OSA port was reset"
+ ::= { ibmOSAExpTRPortEntry 23 }
+
+
+ ibmOsaExpTRLineErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented when a frame or token is
+ copied or repeated by a station, the E bit is zero in the
+ frame or token and one of the following conditions exists:
+ 1) there is a non-data bit (J or K bit) between the SD
+ and the ED of the frame or token, or
+ 2) there is an FCS error in the frame."
+ ::= { ibmOSAExpTRPortEntry 24 }
+
+
+ ibmOsaExpTRBurstErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented when a station detects the
+ absence of transitions for five half-bit timers
+ (burst-five error)."
+ ::= { ibmOSAExpTRPortEntry 25 }
+
+
+ ibmOsaExpTRACErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented when a station
+ receives an AMP or SMP frame in which A is
+ equal to C is equal to 0, and then receives
+ another SMP frame with A is equal to C is
+ equal to 0 without first receiving an AMP
+ frame. It denotes a station that cannot set
+ the AC bits properly."
+ ::= { ibmOSAExpTRPortEntry 26 }
+
+
+ ibmOsaExpTRAbortTransErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented when a station
+ transmits an abort delimiter while transmitting."
+ ::= { ibmOSAExpTRPortEntry 27 }
+
+
+ ibmOsaExpTRInternalErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented when a station
+ recognizes an internal error."
+ ::= { ibmOSAExpTRPortEntry 28 }
+
+
+ ibmOsaExpTRLostFrameErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented when a station is transmitting
+ and its TRR timer expires. This condition denotes a condition
+ transmitting station in strip mode does not receive the
+ trailer of the frame TRR timer goes off."
+ ::= { ibmOSAExpTRPortEntry 29 }
+
+
+ ibmOsaExpTRRcvCongestionCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented when a station
+ recognizes a frame addressed to its specific address, but
+ has no available buffer space indicating that the station
+ is congested."
+ ::= { ibmOSAExpTRPortEntry 30 }
+
+
+ ibmOsaExpTRFrameCopyErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented when a station recognizes a
+ frame addressed to its specific address and detects that the
+ FS field A bits are set to 1 indicating a possible line hit
+ or duplicate address."
+ ::= { ibmOSAExpTRPortEntry 31 }
+
+
+ ibmOsaExpTRTokenErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter is incremented when a station acting as the
+ active monitor recognizes an error condition that needs a
+ token transmitted."
+ ::= { ibmOSAExpTRPortEntry 32 }
+
+
+ ibmOsaExpTRFullDuplexErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An error has been detected by the FDX protocol"
+ ::= { ibmOSAExpTRPortEntry 33 }
+
+
+ ibmOsaExpTRSoftErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Soft Errors the interface
+ has detected. It directly corresponds to
+ the number of Report Error MAC frames
+ that this interface has transmitted.
+ Soft Errors are those which are
+ recoverable by the MAC layer protocols."
+ ::= { ibmOSAExpTRPortEntry 34 }
+
+
+ ibmOsaExpTRHardErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this interface has
+ detected an immediately recoverable
+ fatal error. It denotes the number of
+ times this interface is either
+ transmitting or receiving beacon MAC frames."
+ ::= { ibmOSAExpTRPortEntry 35 }
+
+
+ ibmOsaExpTRSignalLossErrorCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this interface has
+ detected the loss of signal condition from the ring."
+ ::= { ibmOSAExpTRPortEntry 36 }
+
+
+ ibmOsaExpTRTransmitBeaconCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this interface has
+ transmitted a beacon frame."
+ ::= { ibmOSAExpTRPortEntry 37 }
+
+
+ ibmOsaExpTRRecoveryCounter OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Claim Token MAC frames received or
+ transmitted after the interface has received a frame Ring
+ Ring Purge MAC counter signifies the number of times the
+ ring has been purged and is being recovered back into a
+ normal operating state."
+ ::= { ibmOSAExpTRPortEntry 38 }
+
+
+ ibmOsaExpTRLobeWireFaultCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times the interface has
+ detected an open or short circuit in the
+ lobe data path. The adapter will be closed
+ and ibmOsaExpTRRingState will signify this condition."
+ ::= { ibmOSAExpTRPortEntry 39 }
+
+ ibmOsaExpTRRemoveReceivedCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times the interface has received a Remove
+ Ring Station MAC frame request. When this frame is
+ received the interface will enter the closed state and
+ ibmOsaExpTRRingState will signify this condition."
+ ::= { ibmOSAExpTRPortEntry 40 }
+
+ ibmOsaExpTRSingleStationCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times the interface has
+ sensed that it is the only station on the
+ ring. This will happen if the interface
+ is the first one up on a ring, or if
+ there is a hardware problem."
+ ::= { ibmOSAExpTRPortEntry 41 }
+
+
+ -- ibmOSAExpATMPortTable
+
+ ibmOSAExpATMPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF IbmOSAExpATMPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table represents the data associated with an emulated
+ Ethernet port on an OSA-Express ATM feature.
+ There are a maximum of 2 logical ports on each ATM feature,
+ however, each port is shown as though it exists independently
+ with each having an entry in the ibmOSAExpChannelTable."
+ ::= { ibmOSAMibObjects 7 }
+
+ ibmOSAExpATMPortEntry OBJECT-TYPE
+ SYNTAX IbmOSAExpATMPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Definition of a single entry in the ibmOSAExpATMPortTable.
+ Indexed by the ifIndex of the corresponding Device interface."
+ INDEX { ifIndex }
+ ::= { ibmOSAExpATMPortTable 1 }
+
+ IbmOSAExpATMPortEntry ::=
+ SEQUENCE
+ {
+ ibmOsaExpATMPortNumber Integer32,
+ ibmOsaExpATMPortType INTEGER,
+ ibmOsaExpATMLanTrafficState INTEGER,
+ ibmOsaExpATMServiceMode INTEGER,
+ ibmOsaExpATMDisabledStatus BITS,
+ ibmOsaExpATMConfigName DisplayString,
+ ibmOsaExpATMMacAddrActive OCTET STRING,
+ ibmOsaExpATMMacAddrBurntIn OCTET STRING,
+ ibmOsaExpATMUserData DisplayString,
+ ibmOsaExpATMPortName DisplayString,
+ ibmOsaExpATMGroupMacAddrTable OCTET STRING,
+ ibmOsaExpATMIBMEnhancedMode INTEGER,
+ ibmOsaExpATMBestEffortPeakRate Integer32,
+ ibmOsaExpATMConfigMode INTEGER,
+ ibmOsaExpATMConfigLanType INTEGER,
+ ibmOsaExpATMActualLanType INTEGER,
+ ibmOsaExpATMConfigMaxDataFrmSz INTEGER,
+ ibmOsaExpATMActualMaxDataFrmSz INTEGER,
+ ibmOsaExpATMConfigELANName DisplayString,
+ ibmOsaExpATMActualELANName DisplayString,
+ ibmOsaExpATMConfigLESATMAddress OCTET STRING,
+ ibmOsaExpATMActualLESATMAddress OCTET STRING,
+ ibmOsaExpATMControlTimeout Integer32,
+ ibmOsaExpATMMaxUnknownFrameCount Integer32,
+ ibmOsaExpATMMaxUnknownFrameTime Integer32,
+ ibmOsaExpATMVCCTimeoutPeriod Integer32,
+ ibmOsaExpATMMaxRetryCount Counter32,
+ ibmOsaExpATMAgingTime Integer32,
+ ibmOsaExpATMForwardDelayTime Integer32,
+ ibmOsaExpATMExpectedARPRespTime Integer32,
+ ibmOsaExpATMFlushTimeout Integer32,
+ ibmOsaExpATMPathSwitchingDelay Integer32,
+ ibmOsaExpATMLocalSegmentID Integer32,
+ ibmOsaExpATMMltcstSendVCCType INTEGER,
+ ibmOsaExpATMMltcstSendVCCAvgRate Integer32,
+ ibmOsaExpATMMcastSendVCCPeakRate Integer32,
+ ibmOsaExpATMConnectCompleteTimer Integer32,
+ ibmOsaExpATMClientATMAddress OCTET STRING,
+ ibmOsaExpATMClientIdentifier Integer32,
+ ibmOsaExpATMClientCurrentState INTEGER,
+ ibmOsaExpATMLastFailureRespCode INTEGER,
+ ibmOsaExpATMLastFailureState INTEGER,
+ ibmOsaExpATMProtocol Integer32,
+ ibmOsaExpATMLeVersion Integer32,
+ ibmOsaExpATMTopologyChange INTEGER,
+ ibmOsaExpATMConfigServerATMAddr OCTET STRING,
+ ibmOsaExpATMConfigSource INTEGER,
+ ibmOsaExpATMProxyClient INTEGER,
+ ibmOsaExpATMLePDUOctetsInbound Counter64,
+ ibmOsaExpATMNonErrLePDUDiscIn Counter32,
+ ibmOsaExpATMErrLePDUDiscIn Counter32,
+ ibmOsaExpATMLePDUOctetsOutbound Counter64,
+ ibmOsaExpATMNonErrLePDUDiscOut Counter32,
+ ibmOsaExpATMErrLePDUDiscOut Counter32,
+ ibmOsaExpATMLeARPRequestsOut Counter32,
+ ibmOsaExpATMLeARPRequestsIn Counter32,
+ ibmOsaExpATMLeARPRepliesOut Counter32,
+ ibmOsaExpATMLeARPRepliesIn Counter32,
+ ibmOsaExpATMControlFramesOut Counter32,
+ ibmOsaExpATMControlFramesIn Counter32,
+ ibmOsaExpATMSVCFailures Counter32,
+ ibmOsaExpATMConfigDirectIntfc Integer32,
+ ibmOsaExpATMConfigDirectVPI Integer32,
+ ibmOsaExpATMConfigDirectVCI Integer32,
+ ibmOsaExpATMControlDirectIntfc Integer32,
+ ibmOsaExpATMControlDirectVPI Integer32,
+ ibmOsaExpATMControlDirectVCI Integer32,
+ ibmOsaExpATMControlDistIntfc Integer32,
+ ibmOsaExpATMControlDistributeVPI Integer32,
+ ibmOsaExpATMControlDistributeVCI Integer32,
+ ibmOsaExpATMMulticastSendIntfc Integer32,
+ ibmOsaExpATMMulticastSendVPI Integer32,
+ ibmOsaExpATMMulticastSendVCI Integer32,
+ ibmOsaExpATMMulticastFwdIntfc Integer32,
+ ibmOsaExpATMMulticastForwardVPI Integer32,
+ ibmOsaExpATMMulticastForwardVCI Integer32
+ }
+
+
+ ibmOsaExpATMPortNumber OBJECT-TYPE
+ SYNTAX Integer32 (0..3)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The logical port number of this port"
+ ::= { ibmOSAExpATMPortEntry 1 }
+
+ ibmOsaExpATMPortType OBJECT-TYPE
+ SYNTAX INTEGER {
+ emulatedEthernet (17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The logical port type."
+ ::= { ibmOSAExpATMPortEntry 2 }
+
+ ibmOsaExpATMLanTrafficState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ undefined(0),
+ unavailable(1),
+ enabling(2),
+ disabling(3),
+ enabled(4),
+ disabled(5),
+ linkMonitor(6),
+ definitionError(7),
+ configuredOffline(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LAN state value ranges from 0 to 8. A value of 5,
+ disabled is further explained in object
+ ibmOsaExpATMDisabledStatus."
+ ::= { ibmOSAExpATMPortEntry 3 }
+
+ ibmOsaExpATMServiceMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notInServiceMode (0),
+ inServiceMode (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates if the processor is in service mode
+ or not."
+ ::= { ibmOSAExpATMPortEntry 4 }
+
+ ibmOsaExpATMDisabledStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ reserved0 (0),
+ internalPortFailure (1),
+ reserved2 (2),
+ reserved3 (3),
+ reserved4 (4),
+ reserved5 (5),
+ portTemporarilyDisabled (6),
+ reserved7 (7),
+ reserved8 (8),
+ serviceProcessorRequest (9),
+ networkRequest (10),
+ osasfRequest (11),
+ configurationChange (12),
+ linkFailureThresholdExceeded (13),
+ reserved14 (14),
+ reserved15 (15)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When the value of ibmOsaExpATMLanTrafficState is NOT
+ disabled, the value of this object will be zero.
+
+ When the value of ibmOsaExpATMLanTrafficState is
+ disabled(5), this object explains the reason for the
+ disabled state. The value for this object may be a
+ combination of the bits shown."
+ ::= { ibmOSAExpATMPortEntry 5 }
+
+ ibmOsaExpATMConfigName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..34))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the name of the configuration that is on the OSA.
+ It is set using OSA/SF. It is not used by OSA"
+ ::= { ibmOSAExpATMPortEntry 6 }
+
+
+ ibmOsaExpATMMacAddrActive OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 6 byte OCTET STRING which contains the current
+ MAC address in use on the OSA.
+ The values are in canonical format."
+ ::= { ibmOSAExpATMPortEntry 7 }
+
+ ibmOsaExpATMMacAddrBurntIn OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(6))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 6 byte OCTET STRING which contains the burned in
+ MAC address on the OSA.
+ The values are in canonical format."
+ ::= { ibmOSAExpATMPortEntry 8 }
+
+
+ ibmOsaExpATMUserData OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Data set by the user. It is ignored by the OSA."
+ ::= { ibmOSAExpATMPortEntry 9 }
+
+
+ ibmOsaExpATMPortName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the port as used by TCP/IP"
+ ::= { ibmOSAExpATMPortEntry 12 }
+
+
+ ibmOsaExpATMGroupMacAddrTable OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field contains the active Group Addresses.
+ An individual Group Address is 6 bytes long with an
+ additional 2 bytes of padding."
+ ::= { ibmOSAExpATMPortEntry 13 }
+
+ ibmOsaExpATMIBMEnhancedMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ no (0),
+ yes (1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When set to Yes, this keeps data connections active
+ when the connection to the LES is lost."
+ ::= { ibmOSAExpATMPortEntry 14 }
+
+ ibmOsaExpATMBestEffortPeakRate OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Megabytes per second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Values range from 10-1550 and must be divided by 10 to
+ get the proper value. A value of 1550 indicates 155.0
+ Mbytes/sec"
+ ::= { ibmOSAExpATMPortEntry 15 }
+
+
+ ibmOsaExpATMConfigMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ automatic (1),
+ manual (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this LAN Emulation Client should
+ auto-configure the next time it is (re)started. In
+ automatic (1) mode, a client uses a LAN Emulation
+ Configuration Server to learn the ATM address of its
+ LAN Emulation Server, and to obtain other parameters.
+ lecConfig (LanType, MaxDataFrameSize, LanName) are
+ used in the configure request.
+ ibmOsaExpATMConfigLESATMAddress is ignored.
+
+ In manual (2) mode, management tells the
+ client the ATM address of its LAN Emulation Server
+ and the value of the other parmeters. lecConfig
+ (LanType, MaxDataFrameSize, LanName) are used in the
+ Join request. ibmOsaExpATMConfigLESATMAddress
+ tells the client which LES to call."
+ ::= { ibmOSAExpATMPortEntry 16 }
+
+
+ ibmOsaExpATMConfigLanType OBJECT-TYPE
+ SYNTAX INTEGER {
+ emulatedEthernet (17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The logical port type that the user configured the port for"
+ ::= { ibmOSAExpATMPortEntry 17 }
+
+
+ ibmOsaExpATMActualLanType OBJECT-TYPE
+ SYNTAX INTEGER {
+ emulatedEthernet (17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual logical port type the port is running in"
+ ::= { ibmOSAExpATMPortEntry 18 }
+
+
+ ibmOsaExpATMConfigMaxDataFrmSz OBJECT-TYPE
+ SYNTAX INTEGER {
+ unspecified (1),
+ f1516 (2),
+ f4544 (3),
+ f9234 (4),
+ f18190 (5)
+ }
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum data frame size (in bytes) which this
+ client will use the next time it returns to the Initial
+ State. Auto-configuring clients use this parameter in
+ their configure requests. Manually configured clients use
+ it in their join requests."
+ ::= { ibmOSAExpATMPortEntry 19 }
+
+ ibmOsaExpATMActualMaxDataFrmSz OBJECT-TYPE
+ SYNTAX INTEGER {
+ unspecified (1),
+ f1516 (2),
+ f4544 (3),
+ f9234 (4),
+ f18190 (5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum data frame size (in bytes) which this
+ client will use the next time it returns to the Initial
+ State. Auto-configuring clients use this parameter in
+ their configure requests. Manually configured clients use
+ it in their join requests."
+ ::= { ibmOSAExpATMPortEntry 20 }
+
+
+ ibmOsaExpATMConfigELANName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..36))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ELAN Name this client will use the
+ next time it returns to the Initial State.
+ Auto-configuring clients use this parameter in
+ their configure requests. Manually configured
+ clients use it in their join requests."
+ ::= { ibmOSAExpATMPortEntry 21 }
+
+ ibmOsaExpATMActualELANName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..36))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ELAN Name this client will use the
+ next time it returns to the Initial State.
+ Auto-configuring clients use this parameter in
+ their configure requests. Manually configured
+ clients use it in their join requests."
+ ::= { ibmOSAExpATMPortEntry 22 }
+
+
+ ibmOsaExpATMConfigLESATMAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LAN Emulation Server which this client will use the
+ next time it is started in manual configuration mode.
+ When ibmOsaExpATMConfigMode is 'automatic', there is no
+ need to set this address, Address) and no advantage to
+ doing so. The client will use the LECS to find a LES,
+ putting the auto-configured address in
+ ibmOsaExpATMActualLESATMAddress while leaving
+ ibmOsaExpATMConfigLESATMAddress alone.
+ Corresponds to Initial State Parameter C9.
+
+ In LAN Emulation MIB, the OCTET STRING has length 0 or 20.
+ For OSA, the length shall be 20, with the value 0
+ defined to mean that ibmOsaExpATMConfigMode is 'automatic'."
+ ::= { ibmOSAExpATMPortEntry 23 }
+
+ ibmOsaExpATMActualLESATMAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LAN Emulation Server which this client will use the
+ next time it is started in manual configuration mode.
+ When lecConfigMode is 'automatic', there is no need to set
+ this address, Address) and no advantage to doing so. The
+ client will use the LECS to find a LES, putting the
+ auto-configured address in ibmOsaExpATMActualLESATMAddress
+ while leaving ibmOsaExpATMConfigLESATMAddress alone.
+ Corresponds to Initial State Parameter C9.
+
+ In LAN Emulation MIB, the OCTET STRING has length 0 or 20.
+ For OSA, the length shall be 20, with the value 0 defined
+ to mean that ibmOsaExpATMConfigMode is 'automatic'."
+ ::= { ibmOSAExpATMPortEntry 24 }
+
+
+ ibmOsaExpATMControlTimeout OBJECT-TYPE
+ SYNTAX Integer32 (10..300)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Control Time-out. Time out period used for timing out most
+ request/response control frame interactions, as specified
+ elsewhere in the LAN Emulation specification.
+ This time value is expressed in seconds. Corresponds to
+ Initial State Parameter C7."
+ ::= { ibmOSAExpATMPortEntry 25 }
+
+
+ ibmOsaExpATMMaxUnknownFrameCount OBJECT-TYPE
+ SYNTAX Integer32 (1..10)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum Unknown Frame Count. See the description of
+ ibmOsaExpATMMaxUnknownFrameTime below. Corresponds to
+ Initial State Parameter C10."
+ ::= { ibmOSAExpATMPortEntry 26 }
+
+ ibmOsaExpATMMaxUnknownFrameTime OBJECT-TYPE
+ SYNTAX Integer32 (1..60)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum Unknown Frame Time. Within the period of time
+ defined by the Maximum Unknown Frame Time, a LE Client
+ will send no more than Maximum Unknown Frame Count
+ frames to the BUS for a given unicast LAN Destination,
+ and it must also initiate the address resolution
+ protocol to resolve that LAN Destination. This time value
+ is expressed in seconds. Corresponds to Initial State
+ Parameter C11."
+ ::= { ibmOSAExpATMPortEntry 27 }
+
+ ibmOsaExpATMVCCTimeoutPeriod OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VCC Time-out Period. A LE Client SHOULD release any
+ Data Direct VCC that it has not used to transmit
+ or receive any data frames for the length of the VCC
+ Time-out Period. This parameter is only meaningful for
+ SVC Data Direct VCCs.
+ This time value is expressed in seconds. The default
+ value is 20 minutes. A value of 0 seconds means
+ that the timeout period is infinite.
+ Negative values will be rejected by the agent.
+ Corresponds to Initial State Parameter C12."
+ ::= { ibmOSAExpATMPortEntry 28 }
+
+ ibmOsaExpATMMaxRetryCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum Retry Count. A LE CLient MUST not retry a
+ LE_ARP_REQUEST for a given frame's LAN destination
+ more than Maximum Retry Count times, after the first
+ LE_ARP_REQUEST for that same frame's LAN destination.
+ Corresponds to Initial State Parameter C13."
+ ::= { ibmOSAExpATMPortEntry 29 }
+
+ ibmOsaExpATMAgingTime OBJECT-TYPE
+ SYNTAX Integer32 (10..300)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Aging Time. The maximum time that a LE Client will
+ maintain an entry in its LE_ARP cache in the absence
+ of a verification of that relationship.
+ This time value is expressed in seconds. Corresponds to
+ Initial State Parameter C17."
+ ::= { ibmOSAExpATMPortEntry 30 }
+
+ ibmOsaExpATMForwardDelayTime OBJECT-TYPE
+ SYNTAX Integer32 (4..30)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Forward Delay Time. The maximum time that a LE Client
+ will maintain an entry for a non-local MAC address in
+ its LE_ARP cache in the absence of a verification of
+ that relationship, as long as the Topology Change flag
+ C19 is true. ibmOsaExpATMForwardDelayTime SHOULD BE
+ less than ibmOsaExpATMAgingTIme. When it is not,
+ ibmOsaExpATMAgingTime governs LE_ARP aging.
+ This time value is expressed in seconds. Corresponds to
+ Initial State Parameter C18."
+ ::= { ibmOSAExpATMPortEntry 31 }
+
+
+ ibmOsaExpATMExpectedARPRespTime OBJECT-TYPE
+ SYNTAX Integer32 (1..30)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Expected LE_ARP Reponse Time. The maximum time that
+ the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE
+ cycle to take. Used for retries and verifies. This
+ time value is expressed in seconds.
+ Corresponds to Initial State Parameter C20."
+ ::= { ibmOSAExpATMPortEntry 32 }
+
+ ibmOsaExpATMFlushTimeout OBJECT-TYPE
+ SYNTAX Integer32 (1..4)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Flush Time-out. Time limit to wait to receive a
+ LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been
+ sent before taking recovery action. This time value
+ is expressed in seconds. Corresponds to Initial State
+ Parameter C21."
+ ::= { ibmOSAExpATMPortEntry 33 }
+
+ ibmOsaExpATMPathSwitchingDelay OBJECT-TYPE
+ SYNTAX Integer32 (1..8)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Path Switching Delay. The time since sending a
+ frame to the BUS after which the LE Client may
+ assume that the frame has been either discarded
+ or delivered to the recipient. May be used to
+ bypass the Flush protocol. This time value is
+ expressed in seconds. Corresponds to Initial State
+ Parameter C22."
+ ::= { ibmOSAExpATMPortEntry 34 }
+
+ ibmOsaExpATMLocalSegmentID OBJECT-TYPE
+ SYNTAX Integer32 (0..4095)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Local Segment ID. The segment ID of the emulated LAN.
+ This is only required for IEEE 802.5 clients that
+ are Source Routing bridges. Corresponds to Initial
+ State Parameter C23."
+ ::= { ibmOSAExpATMPortEntry 35 }
+
+ ibmOsaExpATMMltcstSendVCCType OBJECT-TYPE
+ SYNTAX INTEGER {
+ bestEffort(1),
+ variableBitRate(2),
+ constantBitRate(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Multicast Send VCC Type. Signalling parameter that
+ SHOULD be used by the LE Client when establishing
+ the Multicast Send VCC. This is the method to be used
+ by the LE Client when specifying traffic parameters
+ when it sets up the Multicast Send VCC for this
+ emulated LAN. Corresponds to Initial State
+ Parameter C24."
+ ::= { ibmOSAExpATMPortEntry 36 }
+
+ ibmOsaExpATMMltcstSendVCCAvgRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Multicast Send VCC AvgRate. Signalling parameter
+ that SHOULD be used by the LE Client when estabishing
+ the Multicast Send VCC. Forward and Backward Sustained
+ Cell Rate to be requested by LE Client when setting
+ up Multicast Send VCC, if using Variable bit rate
+ codings. Corresponds to Initial State Parameter C25."
+ ::= { ibmOSAExpATMPortEntry 37 }
+
+ ibmOsaExpATMMcastSendVCCPeakRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Multicast Send VCC PeakRate. Signalling parameter that
+ SHOULD be used by the LE Client when establishing the
+ Multicast Send VCC. Forward and Backward Peak Cell
+ Rate to be requested by LE Client when setting up the
+ Multicast Send VCC when using either Variable or
+ Constant bit rate codings. Corresponds to Initial
+ State Parameter C26."
+ ::= { ibmOSAExpATMPortEntry 38 }
+
+ ibmOsaExpATMConnectCompleteTimer OBJECT-TYPE
+ SYNTAX Integer32 (1..10)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Connection Complete Timer. Optional. In Connection
+ Establish ment this is the time period in which
+ data or a READY_IND message is expected from a Calling
+ Party. This time value is expressed in seconds.
+ Corresponds to Initial State Parameter C28."
+ ::= { ibmOSAExpATMPortEntry 39 }
+
+
+ ibmOsaExpATMClientATMAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LE Client's ATM Addresses. The primary ATM address
+ of this LAN Emulation Client. This address is used
+ to establish the Control Direct and Multicast Send
+ VCCs, and may also be used to set up Data Direct
+ VCCs. A client may have additional ATM addresses
+ for use with Data Direct VCCs.
+ Corresponds to Initial State Parameter C1."
+ ::= { ibmOSAExpATMPortEntry 40 }
+
+ ibmOsaExpATMClientIdentifier OBJECT-TYPE
+ SYNTAX Integer32 (0..65279)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "LE Client Identifier. Each LE Client requires a
+ LE Client Identifier (LECID) assigned by the LE
+ Server during the Join phase. The LECID is placed
+ in control requests by the LE Client and MAY be used
+ for echo suppression on multicast data frames sent
+ by that LE Client. This value MUST NOT change without
+ terminating the LE Client and returning to the Initial
+ state. A valid LECID MUST be in the range X'0001'
+ through X'FEFF'. The value of this object is only
+ meaningful for a LEC that is connected to a LES. For
+ a LEC which does not belong to an emulated LAN, the
+ value of this object is defined to be 0. Corresponds to
+ Initial State Parameter C14."
+ ::= { ibmOSAExpATMPortEntry 41 }
+
+ ibmOsaExpATMClientCurrentState OBJECT-TYPE
+ SYNTAX INTEGER {
+ initialState (1),
+ lecsConnect (2),
+ configure (3),
+ join (4),
+ initialRegistration (5),
+ busConnect (6),
+ operational (7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current state of the LAN Emulation Client. Note
+ that 'ifOperStatus' is defined to be 'up' when, and
+ only when, this field is 'operational'."
+ ::= { ibmOSAExpATMPortEntry 42 }
+
+ ibmOsaExpATMLastFailureRespCode OBJECT-TYPE
+ SYNTAX INTEGER {
+ none (1),
+ timeout (2),
+ undefinedError (3),
+ versionNotSupported (4),
+ invalidRequestParameters (5),
+ duplicateLanDestination (6),
+ duplicateAtmAddress (7),
+ insufficientResources (8),
+ accessDenied (9),
+ invalidRequesterId (10),
+ invalidLanDestination (11),
+ invalidAtmAddress (12),
+ noConfiguration (13),
+ leConfigureError (14),
+ insufficientInformation (15)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status code from the last failed Configure response
+ or Join response. Failed responses are those for which
+ the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame
+ contains a non-zero code, or fails to arrive within a
+ timeout period. If none of this client's requests have
+ failed, this object has the value 'none'. If the
+ failed response contained a STATUS code that is not
+ defined in the LAN Emulation specification, this
+ object has the value 'undefinedError'. The value
+ 'timeout' is self explanatory. Other failure codes
+ correspond to those defined in the specification,
+ although they may have different numeric values."
+ ::= { ibmOSAExpATMPortEntry 43 }
+
+ ibmOsaExpATMLastFailureState OBJECT-TYPE
+ SYNTAX INTEGER {
+ initialState (1),
+ lecsConnect (2),
+ configure (3),
+ join (4),
+ initialRegistration (5),
+ busConnect (6),
+ operational (7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The state this client was in when it updated the
+ 'ibmOsaExpATMLastFailureRespCode'.
+ If 'ibmOsaExpATMLastFailureRespCode'
+ is 'none', this object has the value initialState(1)."
+ ::= { ibmOSAExpATMPortEntry 44 }
+
+ ibmOsaExpATMProtocol OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LAN Emulation protocol which this client supports,
+ and specifies in its LE_JOIN_REQUESTs."
+ ::= { ibmOSAExpATMPortEntry 45 }
+
+ ibmOsaExpATMLeVersion OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LAN Emulation protocol version which this client
+ supports, and specifies in its LE_JOIN_REQUESTs."
+ ::= { ibmOSAExpATMPortEntry 46 }
+
+ ibmOsaExpATMTopologyChange OBJECT-TYPE
+ SYNTAX INTEGER {
+ true (1),
+ false (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Topology Change. Boolean indication that the LE Client
+ is using the Forward Delay Time C18, instead of the
+ Aging Time C17, to age non-local entries in its LE_ARP
+ cache C16. For a client which is not connected to the
+ LES, this object is defined to have the value 'false'.
+ Corresponds to Initial State Parameter C19."
+ ::= { ibmOSAExpATMPortEntry 47 }
+
+ ibmOsaExpATMConfigServerATMAddr OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(20))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The ATM address of the LAN Emulation Configuration
+ Server (if known) or 0 (otherwise). In LAN
+ Emulation MIB, the OCTET STRING is either 0 length
+ or 20 octets.
+
+ For OSA-ATM, this Address has been
+ changed to a constant 20 octets, with the value 0
+ equivalent to the 0 length OCTET STRING."
+ ::= { ibmOSAExpATMPortEntry 48 }
+
+ ibmOsaExpATMConfigSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ gotAddressViaIlmi(1),
+ usedWellKnownAddress(2),
+ usedLecsPvc(3),
+ didNotUseLecs(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this LAN Emulation Client used the
+ LAN Emulation Configuration Server, and, if so, what
+ method it used to establish the Configuration Direct VCC"
+ ::= { ibmOSAExpATMPortEntry 49 }
+
+ ibmOsaExpATMProxyClient OBJECT-TYPE
+ SYNTAX INTEGER {
+ true (1),
+ false (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this client is acting as a proxy.
+ Proxy clients are allowed to represent unregistered
+ MAC addresses, and receive copies of LE_ARP_REQUEST
+ frames for such addresses. Corresponds to Initial
+ State Parameter C4."
+ ::= { ibmOSAExpATMPortEntry 50 }
+
+
+ ibmOsaExpATMLePDUOctetsInbound OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Le PDU Octets received"
+ ::= { ibmOSAExpATMPortEntry 51 }
+
+ ibmOsaExpATMNonErrLePDUDiscIn OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Non Error Le PDU Octets received"
+ ::= { ibmOSAExpATMPortEntry 52 }
+
+ ibmOsaExpATMErrLePDUDiscIn OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Errored Le PDU Discards received"
+ ::= { ibmOSAExpATMPortEntry 53 }
+
+ ibmOsaExpATMLePDUOctetsOutbound OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Le PDU Discards sent"
+ ::= { ibmOSAExpATMPortEntry 54 }
+
+ ibmOsaExpATMNonErrLePDUDiscOut OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Non Error Le PDU Discards sent"
+ ::= { ibmOSAExpATMPortEntry 55 }
+
+ ibmOsaExpATMErrLePDUDiscOut OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Errored Le PDU Discards sent"
+ ::= { ibmOSAExpATMPortEntry 56 }
+
+ ibmOsaExpATMLeARPRequestsOut OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of LE ARP Requests sent"
+ ::= { ibmOSAExpATMPortEntry 57 }
+
+ ibmOsaExpATMLeARPRequestsIn OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of LE ARP Requests received over the LUNI
+ by this LAN Emulation Client. Requests may arrive
+ on the Control Direct VCC or on the Control Distribute
+ VCC, depending upon how the LES is implemented and the
+ chances it has had for learning. This counter covers
+ both VCCs."
+ ::= { ibmOSAExpATMPortEntry 58 }
+
+ ibmOsaExpATMLeARPRepliesOut OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of LE ARP Responses sent over the LUNI
+ by this LAN Emulation Client."
+ ::= { ibmOSAExpATMPortEntry 59 }
+
+ ibmOsaExpATMLeARPRepliesIn OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of LE ARP Responses received over the
+ LUNI by this LAN Emulation Client. This count includes
+ all such replies, whether solicited or not. Replies
+ may arrive on the Control Direct VCC or on the
+ Control Distribute VCC, depending upon how the LES
+ is implemented. This counter covers both VCCs."
+ ::= { ibmOSAExpATMPortEntry 60 }
+
+ ibmOsaExpATMControlFramesOut OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of control packets sent by this
+ LAN Emulation Client over the LUNI."
+ ::= { ibmOSAExpATMPortEntry 61 }
+
+ ibmOsaExpATMControlFramesIn OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of control packets received by this
+ LAN Emulation Client over the LUNI."
+ ::= { ibmOSAExpATMPortEntry 62 }
+
+ ibmOsaExpATMSVCFailures OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of outgoing LAN Emulation SVCs
+ which this client tried, but failed, to open;
+ incoming LAN Emulation SVCs which this client tried,
+ but failed to establish; and incoming LAN Emulation
+ SVCs which this client rejected for protocol or
+ security reasons."
+ ::= { ibmOSAExpATMPortEntry 63 }
+
+ ibmOsaExpATMConfigDirectIntfc OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface associated with the Configuration
+ Direct VCC. If no Configuration Direct VCC exists,
+ this object has the value 0. Otherwise, the objects
+ ( ibmOsaExpATMConfigDirectIntfc,
+ ibmOsaExpATMConfigDirectVPI,
+ ibmOsaExpATMConfigDirectVCI) identify the circuit."
+ ::= { ibmOSAExpATMPortEntry 64 }
+
+ ibmOsaExpATMConfigDirectVPI OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Configuration Direct VCC exists, this object
+ contains the VPI which identifies that VCC at the
+ point where it connects to this LE client.
+ Otherwise, this object has the value 0."
+ ::= { ibmOSAExpATMPortEntry 65 }
+
+ ibmOsaExpATMConfigDirectVCI OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Configuration Direct VCC exists, this
+ object contains the VCI which identifies that
+ VCC at the point where it connects to this LE
+ client. Otherwise, this object has the value 0."
+ ::= { ibmOSAExpATMPortEntry 66 }
+
+ ibmOsaExpATMControlDirectIntfc OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface associated with the Control Direct
+ VCC. If no Control Direct VCC exists, this object
+ has the value 0. Otherwise, the objects
+ ( ibmOsaExpATMConfigDirectIntfc,
+ ibmOsaExpATMConfigDirectVPI,
+ ibmOsaExpATMConfigDirectVCI) identify the circuit."
+ ::= { ibmOSAExpATMPortEntry 67 }
+
+ ibmOsaExpATMControlDirectVPI OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Control Direct VCC exists, this object
+ contains the VPI which identifies that VCC at
+ the point where it connects to this LE client.
+ Otherwise, this object has the value 0."
+ ::= { ibmOSAExpATMPortEntry 68 }
+
+ ibmOsaExpATMControlDirectVCI OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Control Direct VCC exists, this object
+ contains the VCI which identifies that VCC at
+ the point where it connects to this LE client.
+ Otherwise, this object has the value 0."
+ ::= { ibmOSAExpATMPortEntry 69 }
+
+ ibmOsaExpATMControlDistIntfc OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface associated with the Control Distribute
+ VCC. If no Control Distribute VCC has been set up to
+ this client, this object has the value 0. Otherwise,
+ the objects ( ibmOsaExpATMControlDistIntfc,
+ ibmOsaExpATMControlDistributeVPI.
+ ibmOsaExpATMControlDistributeVCI) identify the circuit."
+ ::= { ibmOSAExpATMPortEntry 70 }
+
+ ibmOsaExpATMControlDistributeVPI OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Control Distribute VCC exists, this object
+ contains the VPI which identifies that VCC at the
+ point where it connects to this LE client.
+ Otherwise, this object has the value 0."
+ ::= { ibmOSAExpATMPortEntry 71 }
+
+ ibmOsaExpATMControlDistributeVCI OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Control Distribute VCC exists, this object
+ contains the VCI which identifies that VCC at the
+ point where it connects to this LE client.
+ Otherwise, this object contains the value 0."
+ ::= { ibmOSAExpATMPortEntry 72 }
+
+ ibmOsaExpATMMulticastSendIntfc OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface associated with the Multicast Send
+ VCC. If no Multicast Send VCC exists, this object
+ has the value 0. Otherwise, the objects
+ ( ibmOsaExpATMMulticastSendIntfc,
+ ibmOsaExpATMMulticastSendVPI,
+ ibmOsaExpATMMulticastSendVCI) identify the circuit."
+ ::= { ibmOSAExpATMPortEntry 73 }
+
+ ibmOsaExpATMMulticastSendVPI OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Multicast Send VCC exists, this object
+ contains the VPI which identifies that VCC at
+ the point where it connects to this LE client.
+ Otherwise, this object has the value 0."
+ ::= { ibmOSAExpATMPortEntry 74 }
+
+ ibmOsaExpATMMulticastSendVCI OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Multicast Send VCC exists, this object
+ contains the VCI which identifies that VCC at
+ the point where it connects to this LE client.
+ Otherwise, this object has the value 0."
+ ::= { ibmOSAExpATMPortEntry 75 }
+
+ ibmOsaExpATMMulticastFwdIntfc OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface associated with the Multicast
+ Forward VCC. If no Multicast Forward VCC has
+ been set up to this client, this object has the
+ value 0. Otherwise, the objects
+ ( ibmOsaExpATMMulticastFwdIntfc,
+ ibmOsaExpATMMulticastForwardVPI,
+ ibmOsaExpATMMulticastForwardVCI) identify the circuit."
+ ::= { ibmOSAExpATMPortEntry 76 }
+
+ ibmOsaExpATMMulticastForwardVPI OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Multicast Forward VCC exists, this object
+ contains the VPI which identifies that VCC at the
+ point where it connects to this LE client.
+ Otherwise, this object has the value 0."
+ ::= { ibmOSAExpATMPortEntry 77 }
+
+ ibmOsaExpATMMulticastForwardVCI OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If the Multicast Forward VCC exists, this object
+ contains the VCI which identifies that VCC at the
+ point where it connects to this LE client.
+ Otherwise, this object has the value 0."
+ ::= { ibmOSAExpATMPortEntry 78 }
+
+
+ -- Conformance information
+ -- Compliance statements
+ --===================================================================
+
+ ibmOSAMibCompliances OBJECT
+ IDENTIFIER ::= { ibmOSAMibConformance 1 }
+ ibmOSAMibGroups OBJECT
+ IDENTIFIER ::= { ibmOSAMibConformance 2 }
+ --===================================================================
+ -- Compliance statements
+ --===================================================================
+ ibmOSAMibCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for the OSA DIrect SNMP product."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ ibmOSAExpChannelGroup,
+ ibmOSAExpPerfGroup,
+ ibmOSAExpPEGroup
+ }
+
+ GROUP ibmOSAExpEthGroup
+ DESCRIPTION
+ "The objects in this group are required for Gigabit or
+ Fast Ethernet features."
+
+ GROUP ibmOSAExpTRGroup
+ DESCRIPTION
+ "The objects in this group are required for OSA-Express
+ Token Ring features."
+
+ GROUP ibmOSAExpATMGroup
+ DESCRIPTION
+ "The objects in this group are required for OSA-Express
+ ATM LAN Emulation features."
+ ::= { ibmOSAMibCompliances 1 }
+
+ --===================================================================
+ -- MIB groupings
+ --===================================================================
+ ibmOSAExpChannelGroup OBJECT-GROUP
+ OBJECTS {
+ ibmOSAExpChannelNumber,
+ ibmOSAExpChannelType,
+ ibmOSAExpChannelHdwLevel,
+ ibmOSAExpChannelSubType,
+ ibmOSAExpChannelShared,
+ ibmOSAExpChannelNodeDesc,
+ ibmOSAExpChannelProcCodeLevel,
+ ibmOSAExpChannelPCIBusUtil1Min,
+ ibmOSAExpChannelProcUtil1Min,
+ ibmOSAExpChannelPCIBusUtil5Min,
+ ibmOSAExpChannelProcUtil5Min,
+ ibmOSAExpChannelPCIBusUtilHour,
+ ibmOSAExpChannelProcUtilHour
+ }
+ STATUS current
+ DESCRIPTION
+ "This group comprises those objects that are related
+ to OSA-Express Channel support."
+ ::= { ibmOSAMibGroups 1 }
+
+ ibmOSAExpPerfGroup OBJECT-GROUP
+ OBJECTS {
+ ibmOSAExpPerfDataLP0 ,
+ ibmOSAExpPerfDataLP1 ,
+ ibmOSAExpPerfDataLP2 ,
+ ibmOSAExpPerfDataLP3 ,
+ ibmOSAExpPerfDataLP4 ,
+ ibmOSAExpPerfDataLP5 ,
+ ibmOSAExpPerfDataLP6 ,
+ ibmOSAExpPerfDataLP7 ,
+ ibmOSAExpPerfDataLP8 ,
+ ibmOSAExpPerfDataLP9 ,
+ ibmOSAExpPerfDataLP10 ,
+ ibmOSAExpPerfDataLP11 ,
+ ibmOSAExpPerfDataLP12 ,
+ ibmOSAExpPerfDataLP13 ,
+ ibmOSAExpPerfDataLP14 ,
+ ibmOSAExpPerfDataLP15
+ }
+ STATUS current
+ DESCRIPTION
+ "This group comprises those objects that are related
+ to OSA-Express Performance data support."
+ ::= { ibmOSAMibGroups 2 }
+
+ ibmOSAExpPEGroup OBJECT-GROUP
+ OBJECTS {
+ ibmOSAExpPEMaxSizeArpCache ,
+ ibmOSAExpPEArpPendingEntries ,
+ ibmOSAExpPEArpActiveEntries ,
+ ibmOSAExpPEIPEntries ,
+ ibmOSAExpPEMulticastEntries ,
+ ibmOSAExpPEMulticastData
+ }
+ STATUS current
+ DESCRIPTION
+ "This group comprises those objects that are related
+ to OSA-Express PE data support."
+ ::= { ibmOSAMibGroups 3 }
+
+ ibmOSAExpEthGroup OBJECT-GROUP
+ OBJECTS {
+ ibmOsaExpEthPortNumber ,
+ ibmOsaExpEthPortType ,
+ ibmOsaExpEthLanTrafficState ,
+ ibmOsaExpEthServiceMode ,
+ ibmOsaExpEthDisabledStatus ,
+ ibmOsaExpEthConfigName ,
+ ibmOsaExpEthConfigSpeedMode ,
+ ibmOsaExpEthActiveSpeedMode ,
+ ibmOsaExpEthMacAddrActive ,
+ ibmOsaExpEthMacAddrBurntIn ,
+ ibmOsaExpEthUserData ,
+ ibmOsaExpEthOutPackets ,
+ ibmOsaExpEthInPackets ,
+ ibmOsaExpEthInGroupFrames ,
+ ibmOsaExpEthInBroadcastFrames ,
+ ibmOsaExpEthPortName ,
+ ibmOsaExpEthInUnknownIPFrames ,
+ ibmOsaExpEthGroupAddrTable
+ }
+ STATUS current
+ DESCRIPTION
+ "This group comprises those objects that are related
+ to OSA-Express Fast Ethernet and Gigabit features only"
+ ::= { ibmOSAMibGroups 4 }
+
+ ibmOSAExpTRGroup OBJECT-GROUP
+ OBJECTS {
+ ibmOsaExpTRPortNumber ,
+ ibmOsaExpTRPortType ,
+ ibmOsaExpTRLanTrafficState ,
+ ibmOsaExpTRServiceMode ,
+ ibmOsaExpTRDisabledStatus ,
+ ibmOsaExpTRConfigName ,
+ ibmOsaExpTRMacAddrActive ,
+ ibmOsaExpTRMacAddrBurntIn ,
+ ibmOsaExpTRConfigSpeedMode ,
+ ibmOsaExpTRActiveSpeedMode ,
+ ibmOsaExpTRUserData ,
+ ibmOsaExpTRPortName ,
+ ibmOsaExpTRGroupAddrTable ,
+ ibmOsaExpTRFunctionalAddr ,
+ ibmOsaExpTRRingStatus ,
+ ibmOsaExpTRAllowAccessPriority ,
+ ibmOsaExpTREarlyTokenRelease ,
+ ibmOsaExpTRBeaconingAddress ,
+ ibmOsaExpTRUpstreamNeighbor ,
+ ibmOsaExpTRRingState ,
+ ibmOsaExpTRRingOpenStatus ,
+ ibmOsaExpTRPacketsTransmitted ,
+ ibmOsaExpTRPacketsReceived ,
+ ibmOsaExpTRLineErrorCount ,
+ ibmOsaExpTRBurstErrorCount ,
+ ibmOsaExpTRACErrorCount ,
+ ibmOsaExpTRAbortTransErrorCount ,
+ ibmOsaExpTRInternalErrorCount ,
+ ibmOsaExpTRLostFrameErrorCount ,
+ ibmOsaExpTRRcvCongestionCount ,
+ ibmOsaExpTRFrameCopyErrorCount ,
+ ibmOsaExpTRTokenErrorCount ,
+ ibmOsaExpTRFullDuplexErrorCount ,
+ ibmOsaExpTRSoftErrorCount ,
+ ibmOsaExpTRHardErrorCount ,
+ ibmOsaExpTRSignalLossErrorCount ,
+ ibmOsaExpTRTransmitBeaconCount ,
+ ibmOsaExpTRRecoveryCounter ,
+ ibmOsaExpTRLobeWireFaultCount ,
+ ibmOsaExpTRRemoveReceivedCount ,
+ ibmOsaExpTRSingleStationCount
+ }
+ STATUS current
+ DESCRIPTION
+ "This group comprises those objects that are related
+ to OSA-Express Token Ring feature only"
+ ::= { ibmOSAMibGroups 5 }
+
+ ibmOSAExpATMGroup OBJECT-GROUP
+ OBJECTS {
+ ibmOsaExpATMPortNumber ,
+ ibmOsaExpATMPortType ,
+ ibmOsaExpATMLanTrafficState ,
+ ibmOsaExpATMServiceMode ,
+ ibmOsaExpATMDisabledStatus ,
+ ibmOsaExpATMConfigName ,
+ ibmOsaExpATMMacAddrActive ,
+ ibmOsaExpATMMacAddrBurntIn ,
+ ibmOsaExpATMUserData ,
+ ibmOsaExpATMPortName ,
+ ibmOsaExpATMGroupMacAddrTable ,
+ ibmOsaExpATMIBMEnhancedMode ,
+ ibmOsaExpATMBestEffortPeakRate ,
+ ibmOsaExpATMConfigMode ,
+ ibmOsaExpATMConfigLanType ,
+ ibmOsaExpATMActualLanType ,
+ ibmOsaExpATMConfigMaxDataFrmSz ,
+ ibmOsaExpATMActualMaxDataFrmSz ,
+ ibmOsaExpATMConfigELANName ,
+ ibmOsaExpATMActualELANName ,
+ ibmOsaExpATMConfigLESATMAddress ,
+ ibmOsaExpATMActualLESATMAddress ,
+ ibmOsaExpATMControlTimeout ,
+ ibmOsaExpATMMaxUnknownFrameCount ,
+ ibmOsaExpATMMaxUnknownFrameTime ,
+ ibmOsaExpATMVCCTimeoutPeriod ,
+ ibmOsaExpATMMaxRetryCount ,
+ ibmOsaExpATMAgingTime ,
+ ibmOsaExpATMForwardDelayTime ,
+ ibmOsaExpATMExpectedARPRespTime ,
+ ibmOsaExpATMFlushTimeout ,
+ ibmOsaExpATMPathSwitchingDelay ,
+ ibmOsaExpATMLocalSegmentID ,
+ ibmOsaExpATMMltcstSendVCCType ,
+ ibmOsaExpATMMltcstSendVCCAvgRate ,
+ ibmOsaExpATMMcastSendVCCPeakRate ,
+ ibmOsaExpATMConnectCompleteTimer ,
+ ibmOsaExpATMClientATMAddress ,
+ ibmOsaExpATMClientIdentifier ,
+ ibmOsaExpATMClientCurrentState ,
+ ibmOsaExpATMLastFailureRespCode ,
+ ibmOsaExpATMLastFailureState ,
+ ibmOsaExpATMProtocol ,
+ ibmOsaExpATMLeVersion ,
+ ibmOsaExpATMTopologyChange ,
+ ibmOsaExpATMConfigServerATMAddr ,
+ ibmOsaExpATMConfigSource ,
+ ibmOsaExpATMProxyClient ,
+ ibmOsaExpATMLePDUOctetsInbound ,
+ ibmOsaExpATMNonErrLePDUDiscIn ,
+ ibmOsaExpATMErrLePDUDiscIn ,
+ ibmOsaExpATMLePDUOctetsOutbound ,
+ ibmOsaExpATMNonErrLePDUDiscOut ,
+ ibmOsaExpATMErrLePDUDiscOut ,
+ ibmOsaExpATMLeARPRequestsOut ,
+ ibmOsaExpATMLeARPRequestsIn ,
+ ibmOsaExpATMLeARPRepliesOut ,
+ ibmOsaExpATMLeARPRepliesIn ,
+ ibmOsaExpATMControlFramesOut ,
+ ibmOsaExpATMControlFramesIn ,
+ ibmOsaExpATMSVCFailures ,
+ ibmOsaExpATMConfigDirectIntfc ,
+ ibmOsaExpATMConfigDirectVPI ,
+ ibmOsaExpATMConfigDirectVCI ,
+ ibmOsaExpATMControlDirectIntfc ,
+ ibmOsaExpATMControlDirectVPI ,
+ ibmOsaExpATMControlDirectVCI ,
+ ibmOsaExpATMControlDistIntfc ,
+ ibmOsaExpATMControlDistributeVPI ,
+ ibmOsaExpATMControlDistributeVCI ,
+ ibmOsaExpATMMulticastSendIntfc ,
+ ibmOsaExpATMMulticastSendVPI ,
+ ibmOsaExpATMMulticastSendVCI ,
+ ibmOsaExpATMMulticastFwdIntfc ,
+ ibmOsaExpATMMulticastForwardVPI ,
+ ibmOsaExpATMMulticastForwardVCI
+
+ }
+ STATUS current
+ DESCRIPTION
+ "This group comprises those objects that are related
+ to OSA-Express ATM LAN Emulation feature only"
+ ::= { ibmOSAMibGroups 7 }
+
+ END
\ No newline at end of file |