diff options
Diffstat (limited to 'MIBS/huawei/HUAWEI-OSPFV3-MIB')
| -rw-r--r-- | MIBS/huawei/HUAWEI-OSPFV3-MIB | 3718 |
1 files changed, 3718 insertions, 0 deletions
diff --git a/MIBS/huawei/HUAWEI-OSPFV3-MIB b/MIBS/huawei/HUAWEI-OSPFV3-MIB new file mode 100644 index 0000000..c9df607 --- /dev/null +++ b/MIBS/huawei/HUAWEI-OSPFV3-MIB @@ -0,0 +1,3718 @@ +-- ==================================================================
+-- Copyright (C) 2017 by HUAWEI TECHNOLOGIES. All rights reserved.
+--
+-- Description: HUAWEI-OSPFV3-MIB.mib, The HUAWEI-OSPFV3-MIB provides information about OSPFv3
+-- Reference: draft-ietf-ospf-ospfv3-mib-11
+-- Version: V2.19
+-- History:
+-- ==================================================================
+
+ HUAWEI-OSPFV3-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ hwDatacomm
+ FROM HUAWEI-MIB
+
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, mib-2,
+ Counter32, Gauge32, Integer32, Unsigned32
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, TruthValue, RowStatus
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ InterfaceIndex
+ FROM IF-MIB
+ InetAddressType, InetAddress, InetAddressPrefixLength
+ FROM INET-ADDRESS-MIB
+ Metric, BigMetric, Status,
+ HelloRange, DesignatedRouterPriority
+ FROM OSPF-MIB;
+
+ hwOspfv3 MODULE-IDENTITY
+ LAST-UPDATED "201708172015Z"
+ ORGANIZATION
+ "Huawei Technologies Co.,Ltd."
+ CONTACT-INFO
+ "Huawei Industrial Base
+ Bantian, Longgang
+ Shenzhen 518129
+ People's Republic of China
+ Website: http://www.huawei.com
+ Email: support@huawei.com
+ "
+ DESCRIPTION
+ "The MIB module for OSPF version 3.
+ Copyright (C) The Internet Society (2006).
+ This version of this MIB module is part of
+ RFC draft-ietf-ospf-ospfv3-mib-11;
+ see the RFC itself for full legal
+ notices."
+
+
+ REVISION "201708172015Z"
+ DESCRIPTION "modify hwOspfv3PeerFlappingSuppressStatus discription"
+
+ REVISION "201608041521Z"
+ DESCRIPTION "Added
+ hwOspfv3DeleteRouteByPurge,
+ hwOspfv3DeleteRouteByPurgeClear,
+ hwOspfv3RouteBeDeletedByPurgeExact,
+ hwOspfv3RouteBeDeletedByPurgeExactClear,
+ hwOspfv3RouteBeDeletedByPurgeInexact,
+ hwOspfv3RouteBeDeletedByPurgeInexactClear,
+ hwOspfv3RouteBeDeletedByPurge,
+ hwOspfv3RouteBeDeletedByPurgeClear,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeExact,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeExactClear,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeInexact,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeInexactClear,
+ hwOspfv3ThirdPartRouteBeDeletedByPurge,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeClear "
+
+ REVISION "201605251110Z"
+ DESCRIPTION "Added a trap hwOspfv3GreaterAgeLsaRecived"
+
+ REVISION "201605251110Z"
+ DESCRIPTION "Added hwOspfv3LsaId to indicates the link-id of recived lsa"
+
+ REVISION "201605251110Z"
+ DESCRIPTION "Added hwOspfv3LsaAge to indicates the age of recived lsa"
+
+ REVISION "201603231750Z"
+ DESCRIPTION "Changed the type of hwOspfv3ProcessId from Integer32 to Unsigned32"
+
+ REVISION "201603181750Z"
+ DESCRIPTION "Added
+ hwOspfv3ImportAseRouteThreshold,
+ hwOspfv3ImportAseRouteThresholdClear,
+ hwOspfv3ImportAseRouteExceed,
+ hwOspfv3ImportAseRouteExceedClear,
+ hwOspfv3ImportNssaRouteThreshold,
+ hwOspfv3ImportNssaRouteThresholdClear,
+ hwOspfv3ImportNssaRouteExceed,
+ hwOspfv3ImportNssaRouteExceedClear"
+
+ REVISION "201603011750Z"
+ DESCRIPTION "Deleted hwOspfv3PeerFlappingSuppressInterval, Added hwOspfv3PeerFlappingSuppressReason to indicates the suppress status change reason, change hwOspfv3PeerFlappingSuppressInterval of hwOspfv3PeerFlappingSuppressStatusChange to hwOspfv3PeerFlappingSuppressReason"
+
+ REVISION "201603011750Z"
+ DESCRIPTION "Modified hwOspfv2PeerFlappingSuppressStatusChange status currentdescription"
+
+ REVISION "201507081110Z"
+ DESCRIPTION "Added hwOspfv3PeerFlappingSuppressStatus to indicates the suppress status of peer flapping"
+
+ REVISION "201505031110Z"
+ DESCRIPTION "Added hwOspfv3IntraAreaRouterIdConflictRecovered to indicates process id"
+
+ REVISION "201504031110Z"
+ DESCRIPTION "Added hwOspfv3IntraAreaRouterIdConflictRecovered to indicates the routerid conflict recovered"
+
+ REVISION "200706122100Z"
+ DESCRIPTION -- RFC Editor assigns RFC xxxx
+ "Initial version, published as RFC xxxx"
+ ::= { hwDatacomm 147 }
+
+ -- Texual conventions
+
+ HWOspfv3UpToRefreshIntervalTc ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "The values one might be able to configure for
+ variables bounded by the Refresh Interval"
+ SYNTAX Unsigned32 (0..3600)
+
+ HWOspfv3DeadIntRangeTc ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "The range, in seconds, of dead interval value."
+ SYNTAX Unsigned32 (0..'FFFF'h)
+
+ HWOspfv3RouterIdTc ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A 32-bit, unsigned integer uniquely identifying the
+ router in the Autonomous System. To ensure uniqueness,
+ this may default to the value of one of the router's
+ IPv4 host addresses if IPv4 is configured on the
+ router."
+ SYNTAX Unsigned32 (0..'FFFFFFFF'h)
+
+ HWOspfv3LsIdTC ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A unique 32-bit identifier of the piece of the
+ routing domain that is being described by a link
+ state advertisement. In contrast to OSPFv2, the
+ Link State ID (LSID) has no addressing semantics."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.4, Link State ID"
+ SYNTAX Unsigned32 (1..'FFFFFFFF'h)
+
+ HWOspfv3AreaIdTc ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "An OSPFv3 Area Identifier"
+ SYNTAX Unsigned32 (0..'FFFFFFFF'h)
+
+ HWOspfv3IfInstIdTc ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "An OSPFv3 interface instance ID"
+ SYNTAX Unsigned32 (0..255)
+
+ HWOspfv3LsaSequenceTC ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "The sequence number field is a signed 32-bit
+ integer. It is used to detect old and duplicate
+ link state advertisements. The space of
+ sequence numbers is linearly ordered. The
+ larger the sequence number, the more recent the
+ advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.6, LS sequence
+ number"
+ SYNTAX Integer32
+
+ HWOspfv3LsaAgeTC ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "The age of the link state advertisement in
+ seconds. The high-order bit of the LS age
+ field is considered the DoNotAge bit for
+ support of on-demand circuits."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.1, LS age;
+ Extending OSPF to Support Demand Circuits,
+ Section 2.2, The LS age field"
+ SYNTAX Unsigned32 (0..3600 | 32768..36368)
+
+ HWHelloRange ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The range of intervals on which hello messages are
+ exchanged."
+ SYNTAX Integer32 (0..65535)
+
+
+
+ -- Top-level structure of MIB
+ hwOspfv3Notifications OBJECT IDENTIFIER ::= { hwOspfv3 0 }
+ hwOspfv3Objects OBJECT IDENTIFIER ::= { hwOspfv3 1 }
+ hwOspfv3Conformance OBJECT IDENTIFIER ::= { hwOspfv3 2 }
+
+ -- OSPFv3 General Variables
+
+ -- These parameters apply globally to the Router's
+ -- OSPFv3 Process.
+
+ hwOspfv3GeneralGroup OBJECT IDENTIFIER ::= { hwOspfv3Objects 1 }
+
+ hwOspfv3RouterId OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the
+ router in the Autonomous System. To ensure
+ uniqueness, this may default to the value of
+ one of the router's IPv4 host addresses,
+ represented as a 32-bit unsigned integer,
+ if IPv4 is configured on the router."
+ ::= { hwOspfv3GeneralGroup 1 }
+
+ hwOspfv3AdminStatus OBJECT-TYPE
+ SYNTAX Status
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administrative status of OSPFv3 in the
+ router. The value 'enabled' denotes that the
+ OSPFv3 Process is active on at least one
+ interface; 'disabled' disables it on all
+ interfaces."
+ ::= { hwOspfv3GeneralGroup 2 }
+
+ hwOspfv3VersionNumber OBJECT-TYPE
+ SYNTAX INTEGER { version3 (3) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The version number of OSPF for IPv6 is 3."
+ ::= { hwOspfv3GeneralGroup 3 }
+
+ hwOspfv3AreaBdrRtrStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A flag to note whether this router is an area
+ border router."
+ REFERENCE
+ "OSPF Version 2, Section 3 Splitting the AS into
+ Areas"
+ ::= { hwOspfv3GeneralGroup 4 }
+
+ hwOspfv3AsBdrRtrStatus OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A flag to note whether this router is
+ configured as an Autonomous System border router."
+ REFERENCE
+ "OSPF Version 2, Section 3.3 Classification of
+ routers"
+ ::= { hwOspfv3GeneralGroup 5 }
+
+ hwOspfv3AsScopeLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of AS-Scope (e.g. AS-External) link state
+ advertisements in the link state database."
+ ::= { hwOspfv3GeneralGroup 6 }
+
+ hwOspfv3AsScopeLsaCksumSum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit unsigned sum of the LS checksums of
+ the AS-scoped link state advertisements
+ contained in the link state database. This sum
+ can be used to determine if there has been a
+ change in a router's link state database, and
+ to compare the link state database of two
+ routers."
+ ::= { hwOspfv3GeneralGroup 7 }
+
+ hwOspfv3OriginateNewLsas OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of new link-state advertisements
+ that have been originated. This number is
+ incremented each time the router originates a new
+ LSA."
+ ::= { hwOspfv3GeneralGroup 8 }
+
+ hwOspfv3RxNewLsas OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of link state advertisements
+ received determined to be new instantiations.
+ This number does not include newer
+ instantiations of self-originated link state
+ advertisements."
+ ::= { hwOspfv3GeneralGroup 9 }
+
+ hwOspfv3ExtLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of AS-Scope External(LS type 0x4005) link state
+ advertisements in the link state database"
+
+ ::= { hwOspfv3GeneralGroup 10 }
+
+
+ hwOspfv3ExtAreaLsdbLimit OBJECT-TYPE
+ SYNTAX Integer32 (-1..'7FFFFFFF'h)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum number of non-default
+ AS-external-LSAs entries that can be stored in the
+ link state database. If the value is -1, then
+ there is no limit.
+
+ When the number of non-default AS-external-LSAs
+ in a router's link-state database reaches
+ ospfv3ExtAreaLsdbLimit, the router enters Overflow
+ state. The router never holds more than
+ ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
+ in its database. Ospfv3ExtAreaLsdbLimit MUST be set
+ identically in all routers attached to the OSPFv3
+ backbone and/or any regular OSPFv3 area. (i.e.,
+ OSPFv3 stub areas and NSSAs are excluded)."
+ ::= { hwOspfv3GeneralGroup 11 }
+
+ hwOspfv3RestartSupport OBJECT-TYPE
+ SYNTAX INTEGER { none (1),
+ plannedOnly (2),
+ plannedAndUnplanned (3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The router's support for OSPFv3 Graceful restart.
+ Options include: no restart support, only planned
+ restarts or both planned and unplanned restarts."
+ ::= { hwOspfv3GeneralGroup 12 }
+
+ hwOspfv3RestartInterval OBJECT-TYPE
+ SYNTAX HWOspfv3UpToRefreshIntervalTc
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Configured OSPFv3 Graceful restart timeout interval."
+ ::= { hwOspfv3GeneralGroup 13 }
+
+ hwOspfv3RestartStatus OBJECT-TYPE
+ SYNTAX INTEGER { notRestarting (1),
+ plannedRestart (2),
+ unplannedRestart (3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current status of OSPFv3 Graceful restart capability."
+ ::= { hwOspfv3GeneralGroup 14 }
+
+ hwOspfv3RestartAge OBJECT-TYPE
+ SYNTAX HWOspfv3UpToRefreshIntervalTc
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remaining time in current OSPFv3 Graceful restart
+ interval."
+ ::= { hwOspfv3GeneralGroup 15 }
+
+ hwOspfv3RestartExitRc OBJECT-TYPE
+ SYNTAX INTEGER { none (1),
+ inProgress (2),
+ completed (3),
+ timedOut (4),
+ topologyChanged (5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Describes the outcome of the last attempt at a
+ Graceful restart.
+
+ none:............no restart has yet been attempted.
+ inProgress:......a restart attempt is currently underway.
+ completed:.......the last restart completed successfully.
+ timedOut:........the last restart timed out.
+ topologyChanged:.the last restart was aborted due to
+ a topology change."
+ ::= { hwOspfv3GeneralGroup 16 }
+
+ hwOspfv3NotificationEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If this object is set to true(1), then it enables
+ the generation of OSPFv3 Notifications. If it is
+ set to false(2), these notifications are not
+ generated.
+
+ Configured values MUST survive an agent reboot."
+ ::= { hwOspfv3GeneralGroup 17 }
+
+ hwOspfv3ReferenceBandwidth OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Reference bandwidth in kilobits per second for
+ calculating default interface metrics. The
+ default value is 100,000 KBPS (100 MBPS).
+
+ This object is persistent, and when written, the
+ entity SHOULD save the change to non-volatile
+ storage."
+ DEFVAL { 100000 }
+ ::= { hwOspfv3GeneralGroup 18 }
+
+ -- The OSPFv3 Area Data Structure contains information
+ -- regarding the various areas. The interfaces and
+ -- virtual links are configured as part of these areas.
+ -- Area 0, by definition, is the Backbone Area
+
+ hwOspfv3AreaTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3AreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information describing the configured
+ parameters and cumulative statistics of the router's
+ attached areas."
+ REFERENCE
+ "OSPF Version 2, Section 6 The Area Data
+ Structure"
+ ::= { hwOspfv3Objects 2 }
+
+ hwOspfv3AreaEntry OBJECT-TYPE
+ SYNTAX HwOspfv3AreaEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information describing the configured
+ parameters and cumulative statistics of one of the
+ router's attached areas."
+ INDEX { hwOspfv3AreaId }
+ ::= { hwOspfv3AreaTable 1 }
+
+ HwOspfv3AreaEntry ::= SEQUENCE {
+ hwOspfv3AreaId
+ HWOspfv3AreaIdTc,
+ hwOspfv3AreaImportAsExtern
+ INTEGER,
+ hwOspfv3AreaSpfRuns
+ Counter32,
+ hwOspfv3AreaBdrRtrCount
+ Gauge32,
+ hwOspfv3AreaAsBdrRtrCount
+ Gauge32,
+ hwOspfv3AreaScopeLsaCount
+ Gauge32,
+ hwOspfv3AreaScopeLsaCksumSum
+ Unsigned32,
+ hwOspfv3AreaSummary
+ INTEGER,
+ hwOspfv3AreaRowStatus
+ RowStatus,
+ hwOspfv3AreaStubMetric
+ BigMetric,
+ hwOspfv3AreaNssaTranslatorRole
+ INTEGER,
+ hwOspfv3AreaNssaTranslatorState
+ INTEGER,
+ hwOspfv3AreaNssaTranslatorStabInterval
+ Unsigned32,
+ hwOspfv3AreaNssaTranslatorEvents
+ Counter32
+ }
+
+ hwOspfv3AreaId OBJECT-TYPE
+ SYNTAX HWOspfv3AreaIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying an area.
+ Area ID 0 is used for the OSPFv3 backbone."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { hwOspfv3AreaEntry 1 }
+
+ hwOspfv3AreaImportAsExtern OBJECT-TYPE
+ SYNTAX INTEGER {
+ importExternal(1), -- normal area
+ importNoExternal(2), -- stub area
+ importNssa(3) -- not-so-stubby-area
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates whether an area is a Stub area, NSSA, or
+ standard area. AS-scope LSAs are not imported into Stub
+ Areas or NSSAs. NSSAs import AS-External data as NSSA
+ LSAs which have Area-scope"
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ DEFVAL { importExternal }
+ ::= { hwOspfv3AreaEntry 2 }
+
+ hwOspfv3AreaSpfRuns OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times that the intra-area route
+ table has been calculated using this area's
+ link state database. This is typically done
+ using Dijkstra's algorithm."
+ ::= { hwOspfv3AreaEntry 3 }
+
+ hwOspfv3AreaBdrRtrCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of area border routers
+ reachable within this area. This is initially zero,
+ and is calculated in each SPF Pass."
+ DEFVAL { 0 }
+ ::= { hwOspfv3AreaEntry 4 }
+
+ hwOspfv3AreaAsBdrRtrCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of Autonomous System border
+ routers reachable within this area. This is
+ initially zero, and is calculated in each SPF
+ Pass."
+ DEFVAL { 0 }
+ ::= { hwOspfv3AreaEntry 5 }
+
+ hwOspfv3AreaScopeLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of Area-Scope link state
+ advertisements in this area's link state
+ database."
+ DEFVAL { 0 }
+ ::= { hwOspfv3AreaEntry 6 }
+
+ hwOspfv3AreaScopeLsaCksumSum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit unsigned sum of the Area-Scope link state
+ advertisements' LS checksums contained in this
+ area's link state database. The sum can be used
+ to determine if there has been a change in a
+ router's link state database, and to compare the
+ link-state database of two routers."
+ ::= { hwOspfv3AreaEntry 7 }
+
+ hwOspfv3AreaSummary OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAreaSummary(1),
+ sendAreaSummary(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The variable ospfv3AreaSummary controls the
+ import of Inter-Area LSAs into stub and
+ NSSA areas. It has no effect on other areas.
+
+ If it is noAreaSummary, the router will neither
+ originate nor propagate Inter-Area LSAs into the
+ stub or NSSA area. It will rely entirely on its
+ default route.
+
+ If it is sendAreaSummary, the router will both
+ summarize and propagate Inter-Area LSAs."
+ DEFVAL { sendAreaSummary }
+ ::= { hwOspfv3AreaEntry 8 }
+
+ hwOspfv3AreaRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { hwOspfv3AreaEntry 9 }
+
+ hwOspfv3AreaStubMetric OBJECT-TYPE
+ SYNTAX BigMetric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The metric value advertised for the default route
+ into Stub and NSSA areas."
+ ::= { hwOspfv3AreaEntry 10 }
+
+ hwOspfv3AreaNssaTranslatorRole OBJECT-TYPE
+ SYNTAX INTEGER { always(1), candidate(2) }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates an NSSA border router's policy to
+ perform NSSA translation of NSSA-LSAs into
+ AS-External-LSAs."
+ DEFVAL { candidate }
+ ::= { hwOspfv3AreaEntry 11 }
+
+ hwOspfv3AreaNssaTranslatorState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ elected(2),
+ disabled(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates if and how an NSSA border router is
+ performing NSSA translation of NSSA-LSAs into
+ AS-External-LSAs. When this object is set to
+ 'enabled', the NSSA border router's
+ ospfv3AreaNssaTranslatorRole has been set to 'always'.
+ When this object is set to 'elected', a candidate
+ NSSA border router is translating NSSA-LSAs into
+ AS-External-LSAs. When this object is set to
+ 'disabled', a candidate NSSA Border router is NOT
+ translating NSSA-LSAs into AS-External-LSAs."
+ ::= { hwOspfv3AreaEntry 12 }
+
+ hwOspfv3AreaNssaTranslatorStabInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The stability interval defined as the number of
+ seconds after an elected translator determines its
+ services are no longer required that it should
+ continue to perform its translation duties."
+ DEFVAL { 40 }
+ ::= { hwOspfv3AreaEntry 13 }
+
+ hwOspfv3AreaNssaTranslatorEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the number of Translator state changes
+ that have occurred since the last start-up of the
+ OSPFv3 routing process.
+
+ Discontinuities in the value of this counter
+ can occur at re-initialization of the management
+ system and at other times as indicated by the
+ value of ospfv3DiscontinuityTime."
+ ::= { hwOspfv3AreaEntry 14 }
+
+ -- OSPFv3 AS-Scope Link State Database
+ -- The Link State Database contains the AS-Scope Link State
+ -- Advertisements from throughout the areas that the
+ -- device is attached to.
+
+ hwOspfv3AsLsdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3AsLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPFv3 Process's AS-Scope Link State Database."
+ ::= { hwOspfv3Objects 3 }
+
+ hwOspfv3AsLsdbEntry OBJECT-TYPE
+ SYNTAX HwOspfv3AsLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A single AS-Scope Link State Advertisement."
+ INDEX { hwOspfv3AsLsdbType,
+ hwOspfv3AsLsdbRouterId,
+ hwOspfv3AsLsdbLsId }
+ ::= { hwOspfv3AsLsdbTable 1 }
+
+ HwOspfv3AsLsdbEntry ::= SEQUENCE {
+ hwOspfv3AsLsdbType
+ Unsigned32,
+ hwOspfv3AsLsdbRouterId
+ HWOspfv3RouterIdTc,
+ hwOspfv3AsLsdbLsId
+ Unsigned32,
+ hwOspfv3AsLsdbSequence
+ HWOspfv3LsaSequenceTC,
+ hwOspfv3AsLsdbAge
+ HWOspfv3LsaAgeTC,
+ hwOspfv3AsLsdbChecksum
+ Integer32,
+ hwOspfv3AsLsdbAdvertisement
+ OCTET STRING,
+ hwOspfv3AsLsdbTypeKnown
+ TruthValue
+ }
+
+ hwOspfv3AsLsdbType OBJECT-TYPE
+ SYNTAX Unsigned32(0..'FFFFFFFF'h)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The type of the link state advertisement.
+ Each link state type has a separate
+ advertisement format. AS-Scope LSAs not recognized
+ by the router may be stored in the database."
+ ::= { hwOspfv3AsLsdbEntry 1 }
+
+ hwOspfv3AsLsdbRouterId OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The 32 bit number that uniquely identifies the
+ originating router in the Autonomous System."
+ REFERENCE
+ "OSPF Version 2, Appendix C.1 Global parameters"
+ ::= { hwOspfv3AsLsdbEntry 2 }
+
+ hwOspfv3AsLsdbLsId OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Link State ID is an LS Type Specific field
+ containing a unique identifier;
+ it identifies the piece of the routing domain
+ that is being described by the advertisement.
+ In contrast to OSPFv2, the LSID has no
+ addressing semantics."
+ ::= { hwOspfv3AsLsdbEntry 3 }
+
+ -- Note that the OSPF Sequence Number is a 32 bit signed
+ -- integer. It starts with the value '80000001'h,
+ -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
+ -- Thus, a typical sequence number will be very negative.
+
+ hwOspfv3AsLsdbSequence OBJECT-TYPE
+ SYNTAX HWOspfv3LsaSequenceTC
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sequence number field is a signed 32-bit
+ integer. It is used to detect old and duplicate
+ link state advertisements. The space of
+ sequence numbers is linearly ordered. The
+ larger the sequence number the more recent the
+ advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.6 LS sequence
+ number"
+ ::= { hwOspfv3AsLsdbEntry 4 }
+
+ hwOspfv3AsLsdbAge OBJECT-TYPE
+ SYNTAX HWOspfv3LsaAgeTC -- Should be 0..MaxAge
+ -- unless DoNotAge bit is set
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the age of the link state
+ advertisement in seconds."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.1 LS age"
+ ::= { hwOspfv3AsLsdbEntry 5 }
+
+ hwOspfv3AsLsdbChecksum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the checksum of the complete
+ contents of the advertisement, excepting the
+ age field. The age field is excepted so that
+ an advertisement's age can be incremented
+ without updating the checksum. The checksum
+ used is the same that is used for ISO
+ connectionless datagrams; it is commonly
+ referred to as the Fletcher checksum."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.7 LS checksum"
+ ::= { hwOspfv3AsLsdbEntry 6 }
+
+ hwOspfv3AsLsdbAdvertisement OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..65535))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The entire Link State Advertisement, including
+ its header."
+ ::= { hwOspfv3AsLsdbEntry 7 }
+
+ hwOspfv3AsLsdbTypeKnown OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the LSA type is recognized by
+ this Router."
+ ::= { hwOspfv3AsLsdbEntry 8 }
+
+ -- OSPFv3 Area-Scope Link State Database
+
+ -- The Link State Database contains the Area-Scope Link State
+ -- Advertisements from throughout the area that the
+ -- device is attached to.
+
+ hwOspfv3AreaLsdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3AreaLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPFv3 Process's Area-Scope Link State Database."
+ ::= { hwOspfv3Objects 4 }
+
+ hwOspfv3AreaLsdbEntry OBJECT-TYPE
+ SYNTAX HwOspfv3AreaLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A single Area-Scope Link State Advertisement."
+ INDEX { hwOspfv3AreaLsdbAreaId,
+ hwOspfv3AreaLsdbType,
+ hwOspfv3AreaLsdbRouterId,
+ hwOspfv3AreaLsdbLsId }
+ ::= { hwOspfv3AreaLsdbTable 1 }
+
+ HwOspfv3AreaLsdbEntry ::= SEQUENCE {
+ hwOspfv3AreaLsdbAreaId
+ HWOspfv3AreaIdTc,
+ hwOspfv3AreaLsdbType
+ Unsigned32,
+ hwOspfv3AreaLsdbRouterId
+ HWOspfv3RouterIdTc,
+ hwOspfv3AreaLsdbLsId
+ Unsigned32,
+ hwOspfv3AreaLsdbSequence
+ HWOspfv3LsaSequenceTC,
+ hwOspfv3AreaLsdbAge
+ HWOspfv3LsaAgeTC,
+ hwOspfv3AreaLsdbChecksum
+ Integer32,
+ hwOspfv3AreaLsdbAdvertisement
+ OCTET STRING,
+ hwOspfv3AreaLsdbTypeKnown
+ TruthValue
+ }
+
+ hwOspfv3AreaLsdbAreaId OBJECT-TYPE
+ SYNTAX HWOspfv3AreaIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The 32-bit identifier of the Area from which the
+ LSA was received."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { hwOspfv3AreaLsdbEntry 1 }
+
+ hwOspfv3AreaLsdbType OBJECT-TYPE
+ SYNTAX Unsigned32(0..'FFFFFFFF'h)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The type of the link state advertisement.
+ Each link state type has a separate
+ advertisement format. Area-Scope LSAs unrecognized
+ by the router are also stored in this database."
+ ::= { hwOspfv3AreaLsdbEntry 2 }
+
+ hwOspfv3AreaLsdbRouterId OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The 32-bit number that uniquely identifies the
+ originating router in the Autonomous System."
+ REFERENCE
+ "OSPF Version 2, Appendix C.1 Global parameters"
+ ::= { hwOspfv3AreaLsdbEntry 3 }
+
+ hwOspfv3AreaLsdbLsId OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Link State ID is an LS Type Specific field
+ containing a unique identifier;
+ it identifies the piece of the routing domain
+ that is being described by the advertisement.
+ In contrast to OSPFv2, the LSID has no
+ addressing semantics."
+ ::= { hwOspfv3AreaLsdbEntry 4 }
+
+ -- Note that the OSPF Sequence Number is a 32 bit signed
+ -- integer. It starts with the value '80000001'h,
+ -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
+ -- Thus, a typical sequence number will be very negative.
+
+ hwOspfv3AreaLsdbSequence OBJECT-TYPE
+ SYNTAX HWOspfv3LsaSequenceTC
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sequence number field is a signed 32-bit
+ integer. It is used to detect old and
+ duplicate link state advertisements. The space
+ of sequence numbers is linearly ordered. The
+ larger the sequence number the more recent the
+ advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.6 LS sequence
+ number"
+ ::= { hwOspfv3AreaLsdbEntry 5 }
+
+ hwOspfv3AreaLsdbAge OBJECT-TYPE
+ SYNTAX HWOspfv3LsaAgeTC -- Should be 0..MaxAge
+ -- unless DoNotAge bit is set
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the age of the link state
+ advertisement in seconds."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.1 LS age"
+ ::= { hwOspfv3AreaLsdbEntry 6 }
+
+ hwOspfv3AreaLsdbChecksum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the checksum of the complete
+ contents of the advertisement, excepting the
+ age field. The age field is excepted so that
+ an advertisement's age can be incremented
+ without updating the checksum. The checksum
+ used is the same that is used for ISO
+ connectionless datagrams; it is commonly
+ referred to as the Fletcher checksum."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.7 LS checksum"
+ ::= { hwOspfv3AreaLsdbEntry 7 }
+
+ hwOspfv3AreaLsdbAdvertisement OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..65535))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The entire Link State Advertisement, including
+ its header."
+ ::= { hwOspfv3AreaLsdbEntry 8 }
+
+ hwOspfv3AreaLsdbTypeKnown OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the LSA type is recognized
+ by this Router."
+ ::= { hwOspfv3AreaLsdbEntry 9 }
+
+ -- OSPFv3 Link-Scope Link State Database
+
+ -- The Link State Database contains the Link-Scope Link State
+ -- Advertisements from the links that the
+ -- device is attached to.
+
+ hwOspfv3LinkLsdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3LinkLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPFv3 Process's Link-Scope Link State Database."
+ ::= { hwOspfv3Objects 5 }
+
+ hwOspfv3LinkLsdbEntry OBJECT-TYPE
+ SYNTAX HwOspfv3LinkLsdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A single Link-Scope Link State Advertisement."
+ INDEX { hwOspfv3LinkLsdbIfIndex,
+ hwOspfv3LinkLsdbIfInstId,
+ hwOspfv3LinkLsdbType,
+ hwOspfv3LinkLsdbRouterId,
+ hwOspfv3LinkLsdbLsId }
+ ::= { hwOspfv3LinkLsdbTable 1 }
+
+ HwOspfv3LinkLsdbEntry ::= SEQUENCE {
+ hwOspfv3LinkLsdbIfIndex
+ InterfaceIndex,
+ hwOspfv3LinkLsdbIfInstId
+ HWOspfv3IfInstIdTc,
+ hwOspfv3LinkLsdbType
+ Unsigned32,
+ hwOspfv3LinkLsdbRouterId
+ HWOspfv3RouterIdTc,
+ hwOspfv3LinkLsdbLsId
+ HWOspfv3LsIdTC,
+ hwOspfv3LinkLsdbSequence
+ HWOspfv3LsaSequenceTC,
+ hwOspfv3LinkLsdbAge
+ HWOspfv3LsaAgeTC,
+ hwOspfv3LinkLsdbChecksum
+ Integer32,
+ hwOspfv3LinkLsdbAdvertisement
+ OCTET STRING,
+ hwOspfv3LinkLsdbTypeKnown
+ TruthValue
+ }
+
+ hwOspfv3LinkLsdbIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The identifier of the link from which the LSA
+ was received."
+ ::= { hwOspfv3LinkLsdbEntry 1 }
+
+ hwOspfv3LinkLsdbIfInstId OBJECT-TYPE
+ SYNTAX HWOspfv3IfInstIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The identifier of the interface instance from
+ which the LSA was received."
+ ::= { hwOspfv3LinkLsdbEntry 2 }
+
+ hwOspfv3LinkLsdbType OBJECT-TYPE
+ SYNTAX Unsigned32(0..'FFFFFFFF'h)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The type of the link state advertisement.
+ Each link state type has a separate
+ advertisement format. Link-Scope LSAs unrecognized
+ by the router are also stored in this database."
+ ::= { hwOspfv3LinkLsdbEntry 3 }
+
+ hwOspfv3LinkLsdbRouterId OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The 32 bit number that uniquely identifies the
+ originating router in the Autonomous System."
+ REFERENCE
+ "OSPF Version 2, Appendix C.1 Global parameters"
+ ::= { hwOspfv3LinkLsdbEntry 4 }
+
+ hwOspfv3LinkLsdbLsId OBJECT-TYPE
+ SYNTAX HWOspfv3LsIdTC
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Link State ID is an LS Type Specific field
+ containing a unique identifier;
+ it identifies the piece of the routing domain
+ that is being described by the advertisement.
+ In contrast to OSPFv2, the LSID has no
+ addressing semantics."
+ ::= { hwOspfv3LinkLsdbEntry 5 }
+
+ -- Note that the OSPF Sequence Number is a 32 bit signed
+ -- integer. It starts with the value '80000001'h,
+ -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
+ -- Thus, a typical sequence number will be very negative.
+
+ hwOspfv3LinkLsdbSequence OBJECT-TYPE
+ SYNTAX HWOspfv3LsaSequenceTC
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The sequence number field is a signed 32-bit
+ integer. It is used to detect old and duplicate
+ link state advertisements. The space of
+ sequence numbers is linearly ordered. The
+ larger the sequence number the more recent the
+ advertisement."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.6 LS sequence
+ number"
+ ::= { hwOspfv3LinkLsdbEntry 6 }
+
+ hwOspfv3LinkLsdbAge OBJECT-TYPE
+ SYNTAX HWOspfv3LsaAgeTC -- Should be 0..MaxAge
+ -- unless DoNotAge bit is set
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the age of the link state
+ advertisement in seconds."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.1 LS age"
+ ::= { hwOspfv3LinkLsdbEntry 7 }
+
+ hwOspfv3LinkLsdbChecksum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This field is the checksum of the complete
+ contents of the advertisement, excepting the
+ age field. The age field is excepted so that
+ an advertisement's age can be incremented
+ without updating the checksum. The checksum
+ used is the same that is used for ISO
+ connectionless datagrams; it is commonly
+ referred to as the Fletcher checksum."
+ REFERENCE
+ "OSPF Version 2, Section 12.1.7 LS checksum"
+ ::= { hwOspfv3LinkLsdbEntry 8 }
+
+ hwOspfv3LinkLsdbAdvertisement OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..65535))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The entire Link State Advertisement, including
+ its header."
+ ::= { hwOspfv3LinkLsdbEntry 9 }
+
+ hwOspfv3LinkLsdbTypeKnown OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the LSA type is recognized by this
+ Router."
+ ::= { hwOspfv3LinkLsdbEntry 10 }
+
+
+
+
+ -- OSPFv3 Interface Table
+
+ hwOspfv3IfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3IfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPFv3 Interface Table describes the
+ interfaces from the viewpoint of OSPFv3."
+ REFERENCE
+ "OSPF Version 2, Appendix C.3 Router interface
+ parameters"
+ ::= { hwOspfv3Objects 6 }
+
+ hwOspfv3IfEntry OBJECT-TYPE
+ SYNTAX HwOspfv3IfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The OSPFv3 Interface Entry describes one
+ interface from the viewpoint of OSPFv3."
+ INDEX { hwOspfv3IfIndex,
+ hwOspfv3IfInstId }
+ ::= { hwOspfv3IfTable 1 }
+
+
+ HwOspfv3IfEntry ::= SEQUENCE {
+ hwOspfv3IfIndex
+ InterfaceIndex,
+ hwOspfv3IfInstId
+ HWOspfv3IfInstIdTc,
+ hwOspfv3IfAreaId
+ HWOspfv3AreaIdTc,
+ hwOspfv3IfType
+ INTEGER,
+ hwOspfv3IfAdminStatus
+ Status,
+ hwOspfv3IfRtrPriority
+ DesignatedRouterPriority,
+ hwOspfv3IfTransitDelay
+ HWOspfv3UpToRefreshIntervalTc,
+ hwOspfv3IfRetransInterval
+ HWOspfv3UpToRefreshIntervalTc,
+ hwOspfv3IfHelloInterval
+ HWHelloRange,
+ hwOspfv3IfRtrDeadInterval
+ HWOspfv3DeadIntRangeTc,
+ hwOspfv3IfState
+ INTEGER,
+ hwOspfv3IfDesignatedRouter
+ HWOspfv3RouterIdTc,
+ hwOspfv3IfBackupDesignatedRouter
+ HWOspfv3RouterIdTc,
+ hwOspfv3IfEvents
+ Counter32,
+ hwOspfv3IfRowStatus
+ RowStatus,
+ hwOspfv3IfMetricValue
+ Metric,
+ hwOspfv3IfLinkScopeLsaCount
+ Gauge32,
+ hwOspfv3IfLinkLsaCksumSum
+ Unsigned32,
+ hwOspfv3IfPollInterval
+ Unsigned32,
+ hwOspfv3IfMulticastForwarding
+ INTEGER
+ }
+
+ hwOspfv3IfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The interface index of this OSPFv3 interface.
+ It corresponds to the interface index of the
+ IPv6 interface on which OSPFv3 is configured."
+ ::= { hwOspfv3IfEntry 1 }
+
+ hwOspfv3IfInstId OBJECT-TYPE
+ SYNTAX HWOspfv3IfInstIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Enables multiple interface instances of OSPFv3
+ to be run over a single link. Each protocol
+ instance would be assigned a separate ID. This ID
+ has local link significance only."
+ ::= { hwOspfv3IfEntry 2 }
+
+ hwOspfv3IfAreaId OBJECT-TYPE
+ SYNTAX HWOspfv3AreaIdTc
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the area
+ to which the interface connects. Area ID
+ 0 is used for the OSPFv3 backbone."
+ DEFVAL { 0 }
+ ::= { hwOspfv3IfEntry 3 }
+
+ hwOspfv3IfType OBJECT-TYPE
+ SYNTAX INTEGER {
+ broadcast(1),
+ nbma(2),
+ pointToPoint(3),
+ loopback(4),
+ pointToMultipoint(5),
+ p2mpNonbroadcast(6)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The OSPFv3 interface type."
+ ::= { hwOspfv3IfEntry 4 }
+
+ hwOspfv3IfAdminStatus OBJECT-TYPE
+ SYNTAX Status
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The OSPFv3 interface's administrative status.
+ The value formed on the interface, and the
+ interface will be advertised as an internal route
+ to some area. The value 'disabled' denotes
+ that the interface is external to OSPFv3."
+ DEFVAL { enabled }
+ ::= { hwOspfv3IfEntry 5 }
+
+ hwOspfv3IfRtrPriority OBJECT-TYPE
+ SYNTAX DesignatedRouterPriority
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The priority of this interface. Used in
+ multi-access networks, this field is used in
+ the designated router election algorithm. The
+ value 0 signifies that the router is not
+ eligible to become the designated router on this
+ particular network. In the event of a tie in
+ this value, routers will use their Router ID as
+ a tie breaker."
+ DEFVAL { 1 }
+ ::= { hwOspfv3IfEntry 6 }
+
+ hwOspfv3IfTransitDelay OBJECT-TYPE
+ SYNTAX HWOspfv3UpToRefreshIntervalTc
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The estimated number of seconds it takes to
+ transmit a link state update packet over this
+ interface."
+ DEFVAL { 1 }
+ ::= { hwOspfv3IfEntry 7 }
+
+ hwOspfv3IfRetransInterval OBJECT-TYPE
+ SYNTAX HWOspfv3UpToRefreshIntervalTc
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds between link state
+ advertisement retransmissions, for adjacencies
+ belonging to this interface. This value is
+ also used when retransmitting database
+ description and link state request packets."
+ DEFVAL { 5 }
+ ::= { hwOspfv3IfEntry 8 }
+
+ hwOspfv3IfHelloInterval OBJECT-TYPE
+ SYNTAX HWHelloRange
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The length of time, in seconds, between the
+ Hello packets that the router sends on the
+ interface. This value must be the same for all
+ routers attached to a common network."
+ DEFVAL { 10 }
+ ::= { hwOspfv3IfEntry 9 }
+
+ hwOspfv3IfRtrDeadInterval OBJECT-TYPE
+ SYNTAX HWOspfv3DeadIntRangeTc
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that a router's Hello
+ packets have not been seen before its
+ neighbors declare the router down on the interface.
+ This should be some multiple of the Hello interval.
+ This value must be the same for all routers attached
+ to a common network."
+ DEFVAL { 40 }
+ ::= { hwOspfv3IfEntry 10 }
+
+ hwOspfv3IfState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(1),
+ loopback(2),
+ waiting(3),
+ pointToPoint(4),
+ designatedRouter(5),
+ backupDesignatedRouter(6),
+ otherDesignatedRouter(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The OSPFv3 Interface State."
+ ::= { hwOspfv3IfEntry 11 }
+
+ hwOspfv3IfDesignatedRouter OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Router ID of the Designated Router."
+ ::= { hwOspfv3IfEntry 12 }
+
+ hwOspfv3IfBackupDesignatedRouter OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Router ID of the Backup Designated
+ Router."
+ ::= { hwOspfv3IfEntry 13 }
+
+ hwOspfv3IfEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this OSPFv3 interface has
+ changed its state, or an error has occurred."
+ ::= { hwOspfv3IfEntry 14 }
+
+ hwOspfv3IfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { hwOspfv3IfEntry 15 }
+
+
+
+ hwOspfv3IfMetricValue OBJECT-TYPE
+ SYNTAX Metric
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The metric assigned to this interface.
+ The default value of the Metric is
+ Reference Bandwidth / ifSpeed. The value
+ of the reference bandwidth is configured
+ by the ospfv3ReferenceBandwidth object."
+ ::= { hwOspfv3IfEntry 16 }
+
+ hwOspfv3IfLinkScopeLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of Link-Scope link state
+ advertisements in this link's link state
+ database."
+ ::= { hwOspfv3IfEntry 17 }
+
+ hwOspfv3IfLinkLsaCksumSum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit unsigned sum of the Link-Scope link state
+ advertisements' LS checksums contained in this
+ link's link state database. The sum can be used
+ to determine if there has been a change in a
+ router's link state database, and to compare the
+ link state database of two routers."
+ ::= { hwOspfv3IfEntry 18 }
+
+ hwOspfv3IfPollInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The larger time interval, in seconds, between
+ the Hello packets sent to an inactive
+ non-broadcast multi-access neighbor."
+ DEFVAL { 120 }
+ ::= { hwOspfv3IfEntry 19 }
+
+ hwOspfv3IfMulticastForwarding OBJECT-TYPE
+ SYNTAX INTEGER {
+ blocked(1), -- no multicast forwarding
+ multicast(2), -- using multicast address
+ unicast(3) -- to each OSPFv3 neighbor
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The way multicasts should forwarded on this
+ interface; not forwarded, forwarded as data
+ link multicasts, or forwarded as data link
+ unicasts. Data link multicasting is not
+ meaningful on point to point and NBMA interfaces,
+ and setting ospfv3MulticastForwarding to 0
+ effectively disables all multicast forwarding."
+ DEFVAL { blocked }
+ ::= { hwOspfv3IfEntry 20 }
+
+
+ -- OSPFv3 Virtual Interface Table
+
+ -- The Virtual Interface Table describes the virtual
+ -- links that the OSPFv3 Process is configured to
+ -- carry on.
+
+ hwOspfv3VirtIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3VirtIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about this router's virtual
+ interfaces."
+ REFERENCE
+ "OSPF Version 2, Appendix C.4 Virtual link
+ parameters"
+ ::= { hwOspfv3Objects 7 }
+
+ hwOspfv3VirtIfEntry OBJECT-TYPE
+ SYNTAX HwOspfv3VirtIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a single Virtual Interface."
+ INDEX { hwOspfv3VirtIfAreaId,
+ hwOspfv3VirtIfNeighbor }
+ ::= { hwOspfv3VirtIfTable 1 }
+
+ HwOspfv3VirtIfEntry ::= SEQUENCE {
+ hwOspfv3VirtIfAreaId
+ HWOspfv3AreaIdTc,
+ hwOspfv3VirtIfNeighbor
+ HWOspfv3RouterIdTc,
+ hwOspfv3VirtIfIndex
+ InterfaceIndex,
+ hwOspfv3VirtIfInstId
+ HWOspfv3IfInstIdTc,
+ hwOspfv3VirtIfTransitDelay
+ HWOspfv3UpToRefreshIntervalTc,
+ hwOspfv3VirtIfRetransInterval
+ HWOspfv3UpToRefreshIntervalTc,
+ hwOspfv3VirtIfHelloInterval
+ HelloRange,
+ hwOspfv3VirtIfRtrDeadInterval
+ HWOspfv3DeadIntRangeTc,
+ hwOspfv3VirtIfState
+ INTEGER,
+ hwOspfv3VirtIfEvents
+ Counter32,
+ hwOspfv3VirtIfRowStatus
+ RowStatus,
+ hwOspfv3VirtIfLinkScopeLsaCount
+ Gauge32,
+ hwOspfv3VirtIfLinkLsaCksumSum
+ Unsigned32
+ }
+
+ hwOspfv3VirtIfAreaId OBJECT-TYPE
+ SYNTAX HWOspfv3AreaIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Transit Area that the Virtual Link
+ traverses. By definition, this is not
+ Area 0"
+ ::= { hwOspfv3VirtIfEntry 1 }
+
+ hwOspfv3VirtIfNeighbor OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Router ID of the Virtual Neighbor."
+ ::= { hwOspfv3VirtIfEntry 2 }
+
+ hwOspfv3VirtIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local interface index assigned to this
+ OSPFv3 virtual interface. It is advertised in
+ Hello's sent over the virtual link and in the
+ router's router-LSAs."
+ ::= { hwOspfv3VirtIfEntry 3 }
+
+ hwOspfv3VirtIfInstId OBJECT-TYPE
+ SYNTAX HWOspfv3IfInstIdTc
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the interface instance ID to be used
+ for the virtual interface. This ID has local link
+ significance only."
+ ::= { hwOspfv3VirtIfEntry 4 }
+
+ hwOspfv3VirtIfTransitDelay OBJECT-TYPE
+ SYNTAX HWOspfv3UpToRefreshIntervalTc
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The estimated number of seconds it takes to
+ transmit a link state update packet over this
+ interface."
+ DEFVAL { 1 }
+ ::= { hwOspfv3VirtIfEntry 5 }
+
+ hwOspfv3VirtIfRetransInterval OBJECT-TYPE
+ SYNTAX HWOspfv3UpToRefreshIntervalTc
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds between link state
+ advertisement retransmissions, for adjacencies
+ belonging to this interface. This value is
+ also used when retransmitting database
+ description and link state request packets. This
+ value should be well over the expected
+ round-trip time."
+ DEFVAL { 5 }
+ ::= { hwOspfv3VirtIfEntry 6 }
+
+ hwOspfv3VirtIfHelloInterval OBJECT-TYPE
+ SYNTAX HelloRange
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The length of time, in seconds, between the
+ Hello packets that the router sends on the
+ interface. This value must be the same for the
+ virtual neighbor."
+ DEFVAL { 10 }
+ ::= { hwOspfv3VirtIfEntry 7 }
+
+ hwOspfv3VirtIfRtrDeadInterval OBJECT-TYPE
+ SYNTAX HWOspfv3DeadIntRangeTc
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that a router's Hello
+ packets have not been seen before its
+ neighbors declare the router down. This should
+ be some multiple of the Hello interval. This
+ value must be the same for the virtual
+ neighbor."
+ DEFVAL { 40 }
+ ::= { hwOspfv3VirtIfEntry 8 }
+
+ hwOspfv3VirtIfState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(1),
+ pointToPoint(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "OSPFv3 virtual interface states. The same encoding
+ as the hwOspfv3IfTable is used."
+ ::= { hwOspfv3VirtIfEntry 9 }
+
+ hwOspfv3VirtIfEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of state changes or error events on
+ this Virtual Link"
+ ::= { hwOspfv3VirtIfEntry 10 }
+
+ hwOspfv3VirtIfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { hwOspfv3VirtIfEntry 11 }
+
+ hwOspfv3VirtIfLinkScopeLsaCount OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of Link-Scope link state
+ advertisements in this virtual link's link state
+ database."
+ ::= { hwOspfv3VirtIfEntry 12 }
+
+ hwOspfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 32-bit unsigned sum of the Link-Scope link-state
+ advertisements' LS checksums contained in this
+ virtual link's link-state database. The sum can be used
+ to determine if there has been a change in a
+ router's link state database, and to compare the
+ link state database of two routers."
+ ::= { hwOspfv3VirtIfEntry 13 }
+
+
+ -- OSPFv3 Neighbor Table
+
+ -- The OSPFv3 Neighbor Table describes all neighbors in
+ -- the locality of the subject router.
+
+ hwOspfv3NbrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3NbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of non-virtual neighbor information."
+ REFERENCE
+ "OSPF Version 2, Section 10 The Neighbor Data
+ Structure"
+ ::= { hwOspfv3Objects 8 }
+
+ hwOspfv3NbrEntry OBJECT-TYPE
+ SYNTAX HwOspfv3NbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The information regarding a single neighbor."
+ REFERENCE
+ "OSPF Version 2, Section 10 The Neighbor Data
+ Structure"
+ INDEX { hwOspfv3NbrIfIndex,
+ hwOspfv3NbrIfInstId,
+ hwOspfv3NbrRtrId }
+ ::= { hwOspfv3NbrTable 1 }
+
+ HwOspfv3NbrEntry ::= SEQUENCE {
+ hwOspfv3NbrIfIndex
+ InterfaceIndex,
+ hwOspfv3NbrIfInstId
+ HWOspfv3IfInstIdTc,
+ hwOspfv3NbrRtrId
+ HWOspfv3RouterIdTc,
+ hwOspfv3NbrAddressType
+ InetAddressType,
+ hwOspfv3NbrAddress
+ InetAddress,
+ hwOspfv3NbrOptions
+ Integer32,
+ hwOspfv3NbrPriority
+ DesignatedRouterPriority,
+ hwOspfv3NbrState
+ INTEGER,
+ hwOspfv3NbrEvents
+ Counter32,
+ hwOspfv3NbrLsRetransQLen
+ Gauge32,
+ hwOspfv3NbrHelloSuppressed
+ TruthValue,
+ hwOspfv3NbrIfId
+ InterfaceIndex,
+ hwOspfv3NbrRestartHelperStatus
+ INTEGER,
+ hwOspfv3NbrRestartHelperAge
+ HWOspfv3UpToRefreshIntervalTc,
+ hwOspfv3NbrRestartHelperExitRc
+ INTEGER
+ }
+
+ hwOspfv3NbrIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The local link ID of the link over which the
+ neighbor can be reached."
+ ::= { hwOspfv3NbrEntry 1 }
+
+ hwOspfv3NbrIfInstId OBJECT-TYPE
+ SYNTAX HWOspfv3IfInstIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interface instance over which the neighbor
+ can be reached. This ID has local link
+ significance only."
+ ::= { hwOspfv3NbrEntry 2 }
+
+ hwOspfv3NbrRtrId OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the neighboring
+ router in the Autonomous System."
+ ::= { hwOspfv3NbrEntry 3 }
+
+ hwOspfv3NbrAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address type of ospfv3NbrAddress. Only IPv6
+ addresses without zone index are expected."
+ ::= { hwOspfv3NbrEntry 4 }
+
+ hwOspfv3NbrAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address of the neighbor associated with
+ the local link."
+ ::= { hwOspfv3NbrEntry 5 }
+
+ hwOspfv3NbrOptions OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A Bit Mask corresponding to the neighbor's
+ options field."
+ REFERENCE
+ "OSPF Version 3, Appendix A.2 the Options field"
+ ::= { hwOspfv3NbrEntry 6 }
+
+ hwOspfv3NbrPriority OBJECT-TYPE
+ SYNTAX DesignatedRouterPriority
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The priority of this neighbor in the designated
+ router election algorithm. The value 0 signifies
+ that the neighbor is not eligible to become the
+ designated router on this particular network."
+ ::= { hwOspfv3NbrEntry 7 }
+
+ hwOspfv3NbrState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(1),
+ attempt(2),
+ init(3),
+ twoWay(4),
+ exchangeStart(5),
+ exchange(6),
+ loading(7),
+ full(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The State of the relationship with this
+ Neighbor."
+ REFERENCE
+ "OSPF Version 2, Section 10.1 Neighbor States"
+ ::= { hwOspfv3NbrEntry 8 }
+
+ hwOspfv3NbrEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this neighbor relationship
+ has changed state, or an error has occurred."
+ ::= { hwOspfv3NbrEntry 9 }
+
+ hwOspfv3NbrLsRetransQLen OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current length of the retransmission
+ queue."
+ ::= { hwOspfv3NbrEntry 10 }
+
+ hwOspfv3NbrHelloSuppressed OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Hellos are being suppressed
+ to the neighbor"
+ ::= { hwOspfv3NbrEntry 11 }
+
+ hwOspfv3NbrIfId OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface ID that the neighbor advertises
+ in its Hello Packets on this link, that is, the
+ neighbor's local interface index."
+ ::= { hwOspfv3NbrEntry 12 }
+
+ hwOspfv3NbrRestartHelperStatus OBJECT-TYPE
+ SYNTAX INTEGER { notHelping (1),
+ helping (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the router is acting
+ as a Graceful restart helper for the neighbor."
+ ::= { hwOspfv3NbrEntry 13 }
+
+ hwOspfv3NbrRestartHelperAge OBJECT-TYPE
+ SYNTAX HWOspfv3UpToRefreshIntervalTc
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remaining time in current OSPFv3 Graceful restart
+ interval, if the router is acting as a restart
+ helper for the neighbor."
+ ::= { hwOspfv3NbrEntry 14 }
+
+ hwOspfv3NbrRestartHelperExitRc OBJECT-TYPE
+ SYNTAX INTEGER { none (1),
+ inProgress (2),
+ completed (3),
+ timedOut (4),
+ topologyChanged (5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Describes the outcome of the last attempt at acting
+ as a Graceful restart helper for the neighbor.
+
+ none:............no restart has yet been attempted.
+ inProgress:......a restart attempt is currently underway.
+ completed:.......the last restart completed successfully.
+ timedOut:........the last restart timed out.
+ topologyChanged:.the last restart was aborted due to
+ a topology change."
+ ::= { hwOspfv3NbrEntry 15 }
+
+
+ -- OSPFv3 Configured Neighbor Table
+
+ -- The OSPFv3 Configured Neighbor Table describes all configured
+ -- neighbors
+
+ hwOspfv3CfgNbrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3CfgNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of configured, non-virtual neighbor
+ information."
+ REFERENCE
+ "OSPF Version 2, Section 10 The Neighbor Data
+ Structure"
+ ::= { hwOspfv3Objects 9 }
+
+ hwOspfv3CfgNbrEntry OBJECT-TYPE
+ SYNTAX HwOspfv3CfgNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The information regarding a single configured
+ neighbor or neighbor discovered by lower-level
+ protocols such as Inverse Neighbor Discovery."
+ REFERENCE
+ "OSPF Version 2, Section 10 The Neighbor Data
+ Structure"
+ INDEX { hwOspfv3CfgNbrIfIndex,
+ hwOspfv3CfgNbrIfInstId,
+ hwOspfv3CfgNbrRtrId }
+ ::= { hwOspfv3CfgNbrTable 1 }
+
+ HwOspfv3CfgNbrEntry ::= SEQUENCE {
+ hwOspfv3CfgNbrIfIndex
+ InterfaceIndex,
+ hwOspfv3CfgNbrIfInstId
+ HWOspfv3IfInstIdTc,
+ hwOspfv3CfgNbrRtrId
+ HWOspfv3RouterIdTc,
+ hwOspfv3CfgNbrPriority
+ DesignatedRouterPriority,
+ hwOspfv3CfgNbrRowStatus
+ RowStatus
+ }
+
+ hwOspfv3CfgNbrIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The local link ID of the link over which the
+ neighbor can be reached."
+ ::= { hwOspfv3CfgNbrEntry 1 }
+
+ hwOspfv3CfgNbrIfInstId OBJECT-TYPE
+ SYNTAX HWOspfv3IfInstIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interface instance over which the neighbor
+ can be reached. This ID has local link
+ significance only."
+ ::= { hwOspfv3CfgNbrEntry 2 }
+
+ hwOspfv3CfgNbrRtrId OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the static neighbor
+ router in the Autonomous System."
+ ::= { hwOspfv3CfgNbrEntry 3 }
+
+ hwOspfv3CfgNbrPriority OBJECT-TYPE
+ SYNTAX DesignatedRouterPriority
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The priority of this neighbor in the designated
+ router election algorithm. The value 0 signifies
+ that the neighbor is not eligible to become the
+ designated router on this particular network."
+ DEFVAL { 1 }
+ ::= { hwOspfv3CfgNbrEntry 4 }
+
+ hwOspfv3CfgNbrRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { hwOspfv3CfgNbrEntry 5 }
+
+ -- OSPFv3 Virtual Neighbor Table
+
+ -- This table describes all virtual neighbors.
+ -- Since Virtual Links are configured in the
+ -- virtual interface table, this table is read-only.
+
+ hwOspfv3VirtNbrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3VirtNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of virtual neighbor information."
+ REFERENCE
+ "OSPF Version 2, Section 15 Virtual Links"
+ ::= { hwOspfv3Objects 10 }
+
+ hwOspfv3VirtNbrEntry OBJECT-TYPE
+ SYNTAX HwOspfv3VirtNbrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Virtual neighbor information."
+ INDEX { hwOspfv3VirtNbrArea,
+ hwOspfv3VirtNbrRtrId }
+ ::= { hwOspfv3VirtNbrTable 1 }
+
+ HwOspfv3VirtNbrEntry ::= SEQUENCE {
+ hwOspfv3VirtNbrArea
+ HWOspfv3AreaIdTc,
+ hwOspfv3VirtNbrRtrId
+ HWOspfv3RouterIdTc,
+ hwOspfv3VirtNbrIfIndex
+ InterfaceIndex,
+ hwOspfv3VirtNbrIfInstId
+ HWOspfv3IfInstIdTc,
+ hwOspfv3VirtNbrAddressType
+ InetAddressType,
+ hwOspfv3VirtNbrAddress
+ InetAddress,
+ hwOspfv3VirtNbrOptions
+ Integer32,
+ hwOspfv3VirtNbrState
+ INTEGER,
+ hwOspfv3VirtNbrEvents
+ Counter32,
+ hwOspfv3VirtNbrLsRetransQLen
+ Gauge32,
+ hwOspfv3VirtNbrHelloSuppressed
+ TruthValue,
+ hwOspfv3VirtNbrIfId
+ InterfaceIndex,
+ hwOspfv3VirtNbrRestartHelperStatus
+ INTEGER,
+ hwOspfv3VirtNbrRestartHelperAge
+ HWOspfv3UpToRefreshIntervalTc,
+ hwOspfv3VirtNbrRestartHelperExitRc
+ INTEGER
+ }
+
+ hwOspfv3VirtNbrArea OBJECT-TYPE
+ SYNTAX HWOspfv3AreaIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Transit Area Identifier."
+ ::= { hwOspfv3VirtNbrEntry 1 }
+
+ hwOspfv3VirtNbrRtrId OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the
+ neighboring router in the Autonomous System."
+ ::= { hwOspfv3VirtNbrEntry 2 }
+
+ hwOspfv3VirtNbrIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The local interface ID for the virtual link over
+ which the neighbor can be reached."
+ ::= { hwOspfv3VirtNbrEntry 3 }
+
+ hwOspfv3VirtNbrIfInstId OBJECT-TYPE
+ SYNTAX HWOspfv3IfInstIdTc
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface instance for the virtual link over
+ which the neighbor can be reached."
+ ::= { hwOspfv3VirtNbrEntry 4 }
+
+ hwOspfv3VirtNbrAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address type of ospfv3VirtNbrAddress. Only IPv6
+ addresses without zone index are expected."
+ ::= { hwOspfv3VirtNbrEntry 5 }
+
+ hwOspfv3VirtNbrAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address advertised by this Virtual Neighbor.
+ It must be a Global scope address."
+ ::= { hwOspfv3VirtNbrEntry 6 }
+
+ hwOspfv3VirtNbrOptions OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A Bit Mask corresponding to the neighbor's options
+ field."
+ REFERENCE
+ "OSPF Version 3, Appendix A.2 the Options field"
+ ::= { hwOspfv3VirtNbrEntry 7 }
+
+ hwOspfv3VirtNbrState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(1),
+ attempt(2),
+ init(3),
+ twoWay(4),
+ exchangeStart(5),
+ exchange(6),
+ loading(7),
+ full(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The state of the Virtual Neighbor Relationship."
+ ::= { hwOspfv3VirtNbrEntry 8 }
+
+ hwOspfv3VirtNbrEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this virtual link has
+ changed its state, or an error has occurred."
+ ::= { hwOspfv3VirtNbrEntry 9 }
+
+ hwOspfv3VirtNbrLsRetransQLen OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current length of the retransmission
+ queue."
+ ::= { hwOspfv3VirtNbrEntry 10 }
+
+ hwOspfv3VirtNbrHelloSuppressed OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Hellos are being suppressed
+ to the neighbor"
+ ::= { hwOspfv3VirtNbrEntry 11 }
+
+ hwOspfv3VirtNbrIfId OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface ID that the neighbor advertises
+ in its Hello Packets on this virtual link, that is,
+ the neighbor's local interface ID."
+ ::= { hwOspfv3VirtNbrEntry 12 }
+
+ hwOspfv3VirtNbrRestartHelperStatus OBJECT-TYPE
+ SYNTAX INTEGER { notHelping (1),
+ helping (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the router is acting
+ as a Graceful restart helper for the neighbor."
+ ::= { hwOspfv3VirtNbrEntry 13 }
+
+ hwOspfv3VirtNbrRestartHelperAge OBJECT-TYPE
+ SYNTAX HWOspfv3UpToRefreshIntervalTc
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Remaining time in current OSPFv3 Graceful restart
+ interval, if the router is acting as a restart
+ helper for the neighbor."
+ ::= { hwOspfv3VirtNbrEntry 14 }
+
+ hwOspfv3VirtNbrRestartHelperExitRc OBJECT-TYPE
+ SYNTAX INTEGER { none (1),
+ inProgress (2),
+ completed (3),
+ timedOut (4),
+ topologyChanged (5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Describes the outcome of the last attempt at acting
+ as a Graceful restart helper for the neighbor.
+
+ none:............no restart has yet been attempted.
+ inProgress:......a restart attempt is currently underway.
+ completed:.......the last restart completed successfully.
+ timedOut:........the last restart timed out.
+ topologyChanged:.the last restart was aborted due to
+ a topology change."
+ ::= { hwOspfv3VirtNbrEntry 15 }
+ --
+ -- The OSPFv3 Area Aggregate Table
+ --
+
+ hwOspfv3AreaAggregateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HwOspfv3AreaAggregateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A range of IPv6 prefixes specified by a
+ prefix/prefix length pair. Note that if
+ ranges are configured such that one range
+ subsumes another range the most specific
+ match is the preferred one."
+ ::= { hwOspfv3Objects 11 }
+
+ hwOspfv3AreaAggregateEntry OBJECT-TYPE
+ SYNTAX HwOspfv3AreaAggregateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A range of IPv6 prefixes specified by a
+ prefix/prefix length pair. Note that if
+ ranges are configured such that one range
+ subsumes another range the most specific match is
+ the preferred one."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ INDEX { hwOspfv3AreaAggregateAreaId,
+ hwOspfv3AreaAggregateAreaLsdbType,
+ hwOspfv3AreaAggregatePrefixType,
+ hwOspfv3AreaAggregatePrefix,
+ hwOspfv3AreaAggregatePrefixLength }
+ ::= { hwOspfv3AreaAggregateTable 1 }
+
+ HwOspfv3AreaAggregateEntry ::= SEQUENCE {
+ hwOspfv3AreaAggregateAreaId
+ HWOspfv3AreaIdTc,
+ hwOspfv3AreaAggregateAreaLsdbType
+ INTEGER,
+ hwOspfv3AreaAggregatePrefixType
+ InetAddressType,
+ hwOspfv3AreaAggregatePrefix
+ InetAddress,
+ hwOspfv3AreaAggregatePrefixLength
+ InetAddressPrefixLength,
+ hwOspfv3AreaAggregateRowStatus
+ RowStatus,
+ hwOspfv3AreaAggregateEffect
+ INTEGER
+ }
+
+ hwOspfv3AreaAggregateAreaId OBJECT-TYPE
+ SYNTAX HWOspfv3AreaIdTc
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Area the Address Aggregate is to be found
+ within."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { hwOspfv3AreaAggregateEntry 1 }
+
+ hwOspfv3AreaAggregateAreaLsdbType OBJECT-TYPE
+ SYNTAX INTEGER {
+ interAreaPrefixLsa(8195), -- 0x2003
+ nssaExternalLsa(8199) -- 0x2007
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The type of the Address Aggregate. This field
+ specifies the Area Lsdb type that this Address
+ Aggregate applies to."
+ REFERENCE
+ "OSPF Version 2, Appendix A.4.1 The Link State
+ Advertisement header"
+ ::= { hwOspfv3AreaAggregateEntry 2 }
+
+ hwOspfv3AreaAggregatePrefixType OBJECT-TYPE
+ SYNTAX InetAddressType --{ ipv6(2) }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The prefix type of ospfv3AreaAggregatePrefix. Only
+ IPv6 addresses are expected."
+ ::= { hwOspfv3AreaAggregateEntry 4 }
+
+ hwOspfv3AreaAggregatePrefix OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IPv6 Prefix."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { hwOspfv3AreaAggregateEntry 5 }
+
+ hwOspfv3AreaAggregatePrefixLength OBJECT-TYPE
+ SYNTAX InetAddressPrefixLength (1..128)
+ UNITS "bits"
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The length of the prefix (in bits). A prefix can
+ not be shorter than 0 bits."
+ REFERENCE
+ "OSPF Version 2, Appendix C.2 Area parameters"
+ ::= { hwOspfv3AreaAggregateEntry 6 }
+
+ hwOspfv3AreaAggregateRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object permits management of the table by
+ facilitating actions such as row creation,
+ construction and destruction.
+
+ The value of this object has no effect on
+ whether other objects in this conceptual row can be
+ modified."
+ ::= { hwOspfv3AreaAggregateEntry 7 }
+
+ hwOspfv3AreaAggregateEffect OBJECT-TYPE
+ SYNTAX INTEGER {
+ advertiseMatching(1),
+ doNotAdvertiseMatching(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Prefixes subsumed by ranges either trigger the
+ advertisement of the indicated aggregate
+ (advertiseMatching), or result in the prefix not
+ being advertised at all outside the area."
+ DEFVAL { advertiseMatching }
+ ::= { hwOspfv3AreaAggregateEntry 8 }
+
+
+
+
+ -- The Ospfv3 Notification Table
+
+ -- The Ospfv3 Notification Table records fields that are
+
+ -- required for notifications
+
+ hwOspfv3NotificationEntry OBJECT IDENTIFIER
+ ::= { hwOspfv3Objects 12 }
+
+ hwOspfv3ConfigErrorType OBJECT-TYPE
+ SYNTAX INTEGER {
+ badVersion (1),
+ areaMismatch (2),
+ unknownNbmaNbr (3), -- Router is DR eligible
+ unknownVirtualNbr (4),
+ helloIntervalMismatch (5),
+ deadIntervalMismatch (6),
+ optionMismatch (7),
+ mtuMismatch (8),
+ duplicateRouterId (9),
+ noError (10) }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Potential types of configuration conflicts.
+ Used by the ospfv3ConfigError and
+ ospfv3ConfigVirtError notifications. When the last value
+ of a notification using this object is needed, but no
+ notifications of that type have been sent, this value
+ pertaining to this object should be returned as
+ noError"
+ ::= { hwOspfv3NotificationEntry 1 }
+
+ hwOspfv3PacketType OBJECT-TYPE
+ SYNTAX INTEGER {
+ hello (1),
+ dbDescript (2),
+ lsReq (3),
+ lsUpdate (4),
+ lsAck (5),
+ nullPacket (6) }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "OSPFv3 packet types. When the last value of a notification
+ using this object is needed, but no notifications of
+ that type have been sent, the value pertaining
+ to this object should be returned as nullPacket"
+ ::= { hwOspfv3NotificationEntry 2 }
+
+ hwOspfv3PacketSrc OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The IPv6 address of an inbound packet that cannot
+ be identified by a neighbor instance. When
+ the last value of a notification using this object is
+ needed, but no notifications of that type have been sent,
+ the value pertaining to this object should
+ be returned as 0.
+
+ Only IPv6 addresses without zone index are expected."
+ ::= { hwOspfv3NotificationEntry 3 }
+
+ hwOspfv3IfName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..64))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The interface name"
+ ::= { hwOspfv3NotificationEntry 4 }
+
+ hwOspfv3IfStateChgReason OBJECT-TYPE
+ SYNTAX INTEGER {
+ noEvent(1),
+ interfaceUp(2),
+ waitTimerExpired(3),
+ backupSeenOccured(4),
+ neighborChangeEventOccured(5),
+ loopInd(6),
+ unloopInd(7),
+ interfaceDown(8)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Interface state change reason."
+ ::= { hwOspfv3NotificationEntry 5 }
+
+ hwOspfv3NbrStateChgReason OBJECT-TYPE
+ SYNTAX INTEGER {
+ noEvent(1),
+ receivedHelloPacket(2),
+ start(3),
+ receivedTwoWay(4),
+ negotiationDone(5),
+ exchangeDone(6),
+ receivedBadLSRequest(7),
+ loadingDone(8),
+ establishedAdjacency(9),
+ mismatchInSeqNumber(10),
+ receivedOneWay(11),
+ nbrKilled(12),
+ inactivityTimerExpired(13),
+ linkDown(14)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "Neighbor state change reason."
+ ::= { hwOspfv3NotificationEntry 6 }
+
+ hwOspfv3ProcessId OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The process ID indicates the OSPFv3 process number. The value ranges from 1 to 4294967295."
+ ::= { hwOspfv3NotificationEntry 7 }
+
+ hwOspfv3AreaIdIndex OBJECT-TYPE
+ SYNTAX HWOspfv3AreaIdTc
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying an area.
+ Area ID 0 is used for the OSPFv3 backbone."
+ ::= { hwOspfv3NotificationEntry 8 }
+
+ hwOspfv3NewRouterId OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifying the
+ router in the Autonomous System. To ensure
+ uniqueness, this may default to the value of
+ one of the router's IPv4 host addresses,
+ represented as a 32-bit unsigned integer,
+ if IPv4 is configured on the router."
+ ::= { hwOspfv3NotificationEntry 9 }
+
+ hwOspfv3PeerFlappingSuppressStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ none(1),
+ holddown(2),
+ holdmaxcost(3)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "his object indicates the mode of the OSPFv3 neighbor relationship flapping suppression.
+none(1): OSPFv3 neighbor relationship flapping suppression is not started yet.
+holddown(2): OSPFv3 neighbor relationship flapping suppression works in Hold-down mode.
+holdmaxcost(3): OSPFv3 neighbor relationship flapping suppression works in Hold-max-cost mode.
+"
+ ::= { hwOspfv3NotificationEntry 10 }
+
+ hwOspfv3PeerFlappingSuppressReason OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ resumeTimerExpired(1),
+ configureChange(2),
+ resetSuppressFlapping(3),
+ neighbourFlapping(4),
+ holddownToHoldmaxcost(5)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The reason of peer flapping suppress status change."
+ ::= { hwOspfv3NotificationEntry 11 }
+
+ hwOspfv3LsaId OBJECT-TYPE
+ SYNTAX HWOspfv3RouterIdTc
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A 32-bit integer uniquely identifies an area.
+ LSA-ID 0.0.0.0 is used for the OSPF LSA."
+ ::= { hwOspfv3NotificationEntry 12 }
+
+ hwOspfv3LsaAge OBJECT-TYPE
+ SYNTAX Integer32 (0..3600)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This age of the ospf lsa."
+ ::= { hwOspfv3NotificationEntry 13 }
+
+ hwOspfv3PurgeHostName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..64))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of an OSPFv3 router which purge OSPFv3 routes."
+ ::= { hwOspfv3NotificationEntry 14 }
+
+ hwOspfv3PurgeIpAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the IP address of an OSPFv3 router which purge OSPFv3 routes."
+ ::= { hwOspfv3NotificationEntry 15 }
+
+ hwOspfv3PurgeRouterId OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System."
+ ::= { hwOspfv3NotificationEntry 16 }
+
+ hwOspfv3FlushLsaNum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of LSAs deleted by the local device or another device."
+ ::= { hwOspfv3NotificationEntry 17 }
+
+ hwOspfv3AffectedNodeNum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of affected node when OSPFv3 routes were deleted."
+ ::= { hwOspfv3NotificationEntry 18 }
+
+ hwOspfv3TotalNodeNum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the total number of node in the System."
+ ::= { hwOspfv3NotificationEntry 19 }
+
+ hwOspfv3PurgeStatPeriod OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the period interval for purge statistic."
+ ::= { hwOspfv3NotificationEntry 20 }
+
+ hwOspfv3RuledOutDeviceNum OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the number of node ruled out when checking faulty device."
+ ::= { hwOspfv3NotificationEntry 21 }
+
+ hwOspfv3PurgeHostName1 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..64))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of an OSPFv3 router which maybe purge OSPFv3 routes."
+ ::= { hwOspfv3NotificationEntry 22 }
+
+ hwOspfv3PurgeHostName2 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..64))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of an OSPFv3 router which maybe purge OSPFv3 routes."
+ ::= { hwOspfv3NotificationEntry 23 }
+
+ hwOspfv3PurgeHostName3 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..64))
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of an OSPFv3 router which maybe purge OSPFv3 routes."
+ ::= { hwOspfv3NotificationEntry 24 }
+
+ hwOspfv3PurgeIpAddress1 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the IP address of an OSPFv3 router which maybe purge OSPFv3 routes."
+ ::= { hwOspfv3NotificationEntry 25 }
+
+ hwOspfv3PurgeIpAddress2 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the IP address of an OSPFv3 router which maybe purge OSPFv3 routes."
+ ::= { hwOspfv3NotificationEntry 26 }
+
+ hwOspfv3PurgeIpAddress3 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the IP address of an OSPFv3 router which maybe purge OSPFv3 routes."
+ ::= { hwOspfv3NotificationEntry 27 }
+
+ hwOspfv3PurgeRouterId1 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System."
+ ::= { hwOspfv3NotificationEntry 28 }
+
+ hwOspfv3PurgeRouterId2 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System."
+ ::= { hwOspfv3NotificationEntry 29 }
+
+ hwOspfv3PurgeRouterId3 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System."
+ ::= { hwOspfv3NotificationEntry 30 }
+
+ -- Notification definitions
+
+ hwOspfv3VirtIfStateChange NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3VirtIfState, -- The new state
+ hwOspfv3IfStateChgReason -- The interface state change reason
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3VirtIfStateChange notification signifies that there
+ has been a change in the state of an OSPFv3 virtual
+ interface.
+
+ This notification should be generated when the interface
+ state regresses (e.g., goes from Point-to-Point to Down)
+ or progresses to a terminal state (i.e., Point-to-Point)."
+ ::= { hwOspfv3Notifications 1 }
+
+ hwOspfv3NbrStateChange NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3NbrState, -- The new state
+ hwOspfv3IfName, -- The interface name
+ hwOspfv3NbrStateChgReason -- The neighbor state change reason
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3NbrStateChange notification signifies that
+ there has been a change in the state of a
+ non-virtual OSPFv3 neighbor. This notification should be
+ generated when the neighbor state regresses
+ (e.g., goes from Attempt or Full to 1-Way or
+ Down) or progresses to a terminal state (e.g.,
+ 2-Way or Full). When an neighbor transitions
+ from or to Full on non-broadcast multi-access
+ and broadcast networks, the notification should be
+ generated by the designated router. A designated
+ router transitioning to Down will be noted by
+ ospfIfStateChange."
+ ::= { hwOspfv3Notifications 2 }
+
+ hwOspfv3VirtNbrStateChange NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3VirtNbrState, -- The new state
+ hwOspfv3NbrStateChgReason -- The neighbor state change reason
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3VirtNbrStateChange notification signifies
+ that there has been a change in the state of an OSPFv3
+ virtual neighbor. This notification should be generated
+ when the neighbor state regresses (e.g., goes
+ from Attempt or Full to 1-Way or Down) or
+ progresses to a terminal state (e.g., Full)."
+ ::= { hwOspfv3Notifications 3 }
+
+ hwOspfv3IfConfigError NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3IfState, -- State of the interface
+ hwOspfv3PacketSrc, -- IPv6 address of source
+ hwOspfv3ConfigErrorType, -- Type of error
+ hwOspfv3PacketType -- Type of packet
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3IfConfigError notification signifies that a
+ packet has been received on a non-virtual
+ interface from a router whose configuration
+ parameters conflict with this router's
+ configuration parameters. Note that the event
+ optionMismatch should cause a notification only if it
+ prevents an adjacency from forming."
+ ::= { hwOspfv3Notifications 4 }
+
+ hwOspfv3VirtIfConfigError NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3VirtIfState, -- State of the interface
+ hwOspfv3ConfigErrorType, -- Type of error
+ hwOspfv3PacketType
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3VirtIfConfigError notification signifies that a
+ packet has been received on a virtual interface
+ from a router whose configuration parameters
+ conflict with this router's configuration
+ parameters. Note that the event optionMismatch
+ should cause a notification only if it prevents an
+ adjacency from forming."
+ ::= { hwOspfv3Notifications 5 }
+
+
+ hwOspfv3IfRxBadPacket NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3IfState, -- State of the interface
+ hwOspfv3PacketSrc, -- The source IPv6 address
+ hwOspfv3PacketType -- Type of packet
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3IfRxBadPacket notification signifies that an
+ OSPFv3 packet that cannot be parsed has been received on a
+ non-virtual interface."
+ ::= { hwOspfv3Notifications 6 }
+
+ hwOspfv3VirtIfRxBadPacket NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3VirtIfState, -- State of the interface
+ hwOspfv3PacketType -- Type of packet
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3VirtIfRxBadPacket notification signifies
+ that an OSPFv3 packet that cannot be parsed has been received
+ on a virtual interface."
+ ::= { hwOspfv3Notifications 7 }
+
+
+
+
+ hwOspfv3IfStateChange NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3IfState, -- The new state
+ hwOspfv3IfName, -- The interface name
+ hwOspfv3IfStateChgReason -- The interface state change reason
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3IfStateChange notification signifies that there
+ has been a change in the state of a non-virtual
+ OSPFv3 interface. This notification should be generated
+ when the interface state regresses (e.g., goes
+ from Dr to Down) or progresses to a terminal
+ state (i.e., Point-to-Point, DR Other, Dr, or
+ Backup)."
+ ::= { hwOspfv3Notifications 8 }
+
+
+
+ hwOspfv3RestartStatusChange NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3RestartStatus, -- new status
+ hwOspfv3RestartInterval,
+ hwOspfv3RestartExitRc
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3RestartStatusChange notification signifies that
+ there has been a change in the graceful restart
+ state for the router. This notification should be
+ generated when the router restart status
+ changes."
+ ::= { hwOspfv3Notifications 9 }
+
+ hwOspfv3NbrRestartHelperStatusChange NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3NbrRestartHelperStatus, -- new status
+ hwOspfv3NbrRestartHelperAge,
+ hwOspfv3NbrRestartHelperExitRc
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3NbrRestartHelperStatusChange notification
+ signifies that there has been a change in the
+ graceful restart helper state for the neighbor.
+ This notification should be generated when the
+ neighbor restart helper status transitions for a neighbor."
+ ::= { hwOspfv3Notifications 10 }
+
+ hwOspfv3VirtNbrRestartHelperStatusChange NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3VirtNbrRestartHelperStatus, -- new status
+ hwOspfv3VirtNbrRestartHelperAge,
+ hwOspfv3VirtNbrRestartHelperExitRc
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3VirtNbrRestartHelperStatusChange
+ notification signifies that there has been a
+ change in the graceful restart helper state for
+ the virtual neighbor. This notification should be
+ generated when the virtual neighbor restart helper status
+ transitions for a virtual neighbor."
+ ::= { hwOspfv3Notifications 11 }
+
+ hwOspfv3NssaTranslatorStatusChange NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3AreaNssaTranslatorState -- new status
+ }
+ STATUS current
+ DESCRIPTION
+ "An ospfv3NssaTranslatorStatusChange notification
+ indicates that there has been a change in the router's ability
+ to translate OSPFv3 NSSA LSAs into OSPFv3 External LSAs.
+ This notification should be generated when the Translator Status
+ transitions from or to any defined status on a per area basis."
+ ::= { hwOspfv3Notifications 12 }
+
+ hwOspfv3LastAuthKeyExpiry NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3IfName -- The interface name
+ }
+ STATUS current
+ DESCRIPTION
+ "An hwOspfv3LastAuthKeyExpiry notification
+ indicates that the last key associated with an interface has expired.
+ When this notification is received, either the lifetime of the key should be extended
+ or a new key should be configured."
+ ::= { hwOspfv3Notifications 13 }
+
+ hwOspfv3AuthSequenceNumWrap NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3RouterId, -- The originator of the notification
+ hwOspfv3IfName -- The interface name
+ }
+ STATUS current
+ DESCRIPTION
+ "An hwOspfv3AuthSequenceNumWrap notification
+ indicates that the 64-bit authentication sequence number has wrapped.
+ When this notification is received, all the keys must be reset
+ to avoid the possibility of replay attacks."
+ ::= { hwOspfv3Notifications 14 }
+
+ hwOspfv3IntraAreaRouterIdConflictRecovered NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3AreaIdIndex, hwOspfv3RouterId, hwOspfv3NewRouterId }
+ STATUS current
+ DESCRIPTION
+ "The object is used to monitor router ID conflict recovery in an intra area."
+ ::= { hwOspfv3Notifications 15 }
+
+ hwOspfv3PeerFlappingSuppressStatusChange NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3RouterId, hwOspfv3AreaIdIndex, hwOspfv3IfName, hwOspfv3PeerFlappingSuppressStatus, hwOspfv3PeerFlappingSuppressReason }
+ STATUS current
+ DESCRIPTION
+ "These objects are used to monitor changed OSPFv3 peer flapping suppress status."
+ ::= { hwOspfv3Notifications 16 }
+
+ hwOspfv3ImportAseRouteThreshold NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes exceeds the configured alarm threshold."
+ ::= { hwOspfv3Notifications 17 }
+
+ hwOspfv3ImportAseRouteThresholdClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes has been less than the configured alarm threshold."
+ ::= { hwOspfv3Notifications 18 }
+
+ hwOspfv3ImportAseRouteExceed NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes exceeds the configured maximum number."
+ ::= { hwOspfv3Notifications 19 }
+
+ hwOspfv3ImportAseRouteExceedClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes has been less than the configured maximum number."
+ ::= { hwOspfv3Notifications 20 }
+
+ hwOspfv3ImportNssaRouteThreshold NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes exceeds the configured alarm threshold."
+ ::= { hwOspfv3Notifications 21 }
+
+ hwOspfv3ImportNssaRouteThresholdClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes has been less than the configured alarm threshold."
+ ::= { hwOspfv3Notifications 22 }
+
+ hwOspfv3ImportNssaRouteExceed NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes exceeds the configured maximum number."
+ ::= { hwOspfv3Notifications 23 }
+
+ hwOspfv3ImportNssaRouteExceedClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes has been less than the configured maximum number."
+ ::= { hwOspfv3Notifications 24 }
+
+ hwOspfv3GreaterAgeLsaRecived NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3RouterId, hwOspfv3AreaIdIndex, hwOspfv3IfName, hwOspfv3LsaId, hwOspfv3LsaAge }
+ STATUS current
+ DESCRIPTION
+ "This object is used to monitor the router recive a greater age lsa in ospfv3."
+ ::= { hwOspfv3Notifications 25 }
+
+ hwOspfv3DeleteRouteByPurge NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex,
+ hwOspfv3FlushLsaNum, hwOspfv3AffectedNodeNum, hwOspfv3TotalNodeNum, hwOspfv3PurgeStatPeriod }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the local device deleted OSPFv3 routes advertised by other devices.
+ Reset or isolate the device from the network."
+ ::= { hwOspfv3Notifications 26 }
+
+ hwOspfv3DeleteRouteByPurgeClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that the local device did not delete OSPFv3 routes advertised by other devices."
+ ::= { hwOspfv3Notifications 27 }
+
+ hwOspfv3RouteBeDeletedByPurgeExact NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex,
+ hwOspfv3FlushLsaNum, hwOspfv3AffectedNodeNum, hwOspfv3TotalNodeNum, hwOspfv3PurgeStatPeriod }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by the local device were deleted by another device.
+ Reset or isolate the faulty device from the network."
+ ::= { hwOspfv3Notifications 28 }
+
+ hwOspfv3RouteBeDeletedByPurgeExactClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by the local device were not deleted by another device."
+ ::= { hwOspfv3Notifications 29 }
+
+ hwOspfv3RouteBeDeletedByPurgeInexact NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex,
+ hwOspfv3FlushLsaNum, hwOspfv3AffectedNodeNum, hwOspfv3TotalNodeNum, hwOspfv3RuledOutDeviceNum, hwOspfv3PurgeStatPeriod }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by the local device were deleted by another device,
+ and the possibly faulty device did not support OSPFv3 flush LSA source trace. Log in to the possibly faulty device.
+ If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices.
+ Neither of the devices displayed in the display ospfv3 purge-source-trace analysis-info command output is the faulty device."
+ ::= { hwOspfv3Notifications 30 }
+
+ hwOspfv3RouteBeDeletedByPurgeInexactClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by the local device were not deleted by another device."
+ ::= { hwOspfv3Notifications 31 }
+
+ hwOspfv3RouteBeDeletedByPurge NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex, hwOspfv3TotalNodeNum,
+ hwOspfv3PurgeHostName1, hwOspfv3PurgeIpAddress1, hwOspfv3PurgeRouterId1,
+ hwOspfv3PurgeHostName2, hwOspfv3PurgeIpAddress2, hwOspfv3PurgeRouterId2,
+ hwOspfv3PurgeHostName3, hwOspfv3PurgeIpAddress3, hwOspfv3PurgeRouterId3 }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by the local device were deleted by another device.
+ Log in to the possibly faulty device. If the device is deleting routes, reset or isolate it from the network.
+ Otherwise, check other devices."
+ ::= { hwOspfv3Notifications 32 }
+
+ hwOspfv3RouteBeDeletedByPurgeClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by the local device were not deleted by another device."
+ ::= { hwOspfv3Notifications 33 }
+
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeExact NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex,
+ hwOspfv3FlushLsaNum, hwOspfv3AffectedNodeNum, hwOspfv3TotalNodeNum, hwOspfv3PurgeStatPeriod }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by another device were deleted.
+ Reset or isolate the faulty device from the network."
+ ::= { hwOspfv3Notifications 34 }
+
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeExactClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by another device were not deleted."
+ ::= { hwOspfv3Notifications 35 }
+
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeInexact NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex,
+ hwOspfv3FlushLsaNum, hwOspfv3AffectedNodeNum, hwOspfv3TotalNodeNum, hwOspfv3RuledOutDeviceNum, hwOspfv3PurgeStatPeriod }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by another device were deleted,
+ and the possibly faulty device did not support OSPFv3 flush LSA source trace.
+ Log in to the possibly faulty device. If the device is deleting routes, reset or isolate it from the network.
+ Otherwise, check other devices. Neither of the devices displayed in the display ospfv3 purge-source-trace analysis-info
+ command output is the faulty device."
+ ::= { hwOspfv3Notifications 36 }
+
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeInexactClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by another device were not deleted."
+ ::= { hwOspfv3Notifications 37 }
+
+ hwOspfv3ThirdPartRouteBeDeletedByPurge NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex, hwOspfv3TotalNodeNum,
+ hwOspfv3PurgeHostName1, hwOspfv3PurgeIpAddress1, hwOspfv3PurgeRouterId1,
+ hwOspfv3PurgeHostName2, hwOspfv3PurgeIpAddress2, hwOspfv3PurgeRouterId2,
+ hwOspfv3PurgeHostName3, hwOspfv3PurgeIpAddress3, hwOspfv3PurgeRouterId3 }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by another device were deleted. Log in to the possibly faulty device.
+ If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices."
+ ::= { hwOspfv3Notifications 38 }
+
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeClear NOTIFICATION-TYPE
+ OBJECTS { hwOspfv3ProcessId, hwOspfv3PurgeHostName, hwOspfv3PurgeIpAddress, hwOspfv3PurgeRouterId, hwOspfv3AreaIdIndex }
+ STATUS current
+ DESCRIPTION
+ "This object indicates that OSPFv3 routes advertised by another device were not deleted."
+ ::= { hwOspfv3Notifications 39 }
+
+ -- conformance information
+
+ hwOspfv3Groups OBJECT IDENTIFIER ::= { hwOspfv3Conformance 1 }
+ hwOspfv3Compliances OBJECT IDENTIFIER ::= { hwOspfv3Conformance 2 }
+
+ -- compliance statements
+
+ hwOspfv3Compliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION "The compliance statement"
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ hwOspfv3BasicGroup,
+ hwOspfv3AreaGroup,
+ hwOspfv3IfGroup,
+ hwOspfv3VirtIfGroup,
+ hwOspfv3NbrGroup,
+ hwOspfv3CfgNbrGroup,
+ hwOspfv3VirtNbrGroup,
+ hwOspfv3AreaAggregateGroup
+ }
+
+ GROUP hwOspfv3AsLsdbGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ display their AS-scope link state database."
+
+ GROUP hwOspfv3AreaLsdbGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ display their Area-scope link state database."
+
+ GROUP hwOspfv3LinkLsdbGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ display their Link-scope link state database."
+
+ GROUP hwOspfv3NotificationObjectGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ support OSPFv3 notifications."
+
+ GROUP hwOspfv3NotificationGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ support OSPFv3 notifications."
+
+ OBJECT hwOspfv3NbrAddressType
+ SYNTAX InetAddressType -- { ipv6(2) }
+ DESCRIPTION
+ "An implementation is only required to support IPv6
+ address without zone index."
+
+ OBJECT hwOspfv3NbrAddress
+ SYNTAX InetAddress (SIZE (16))
+ DESCRIPTION
+ "An implementation is only required to support IPv6
+ address without zone index."
+
+ OBJECT hwOspfv3VirtNbrAddressType
+ SYNTAX InetAddressType --{ ipv6(2) }
+ DESCRIPTION
+ "An implementation is only required to support IPv6
+ address without zone index."
+
+ OBJECT hwOspfv3VirtNbrAddress
+ SYNTAX InetAddress (SIZE (16))
+ DESCRIPTION
+ "An implementation is only required to support IPv6
+ address without zone index."
+
+ ::= { hwOspfv3Compliances 1 }
+
+ hwOspfv3ReadOnlyCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "When this MIB module is implemented without
+ support for read-create (i.e., in read-only
+ mode), the implementation can claim read-only
+ compliance. Such a device can then be monitored,
+ but cannot be configured with this MIB."
+
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ hwOspfv3BasicGroup,
+ hwOspfv3AreaGroup,
+ hwOspfv3IfGroup,
+ hwOspfv3VirtIfGroup,
+ hwOspfv3NbrGroup,
+ hwOspfv3CfgNbrGroup,
+ hwOspfv3VirtNbrGroup,
+ hwOspfv3AreaAggregateGroup
+ }
+
+ GROUP hwOspfv3AsLsdbGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ display their AS-scope link state database."
+
+ GROUP hwOspfv3AreaLsdbGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ display their Area-scope link state database."
+
+ GROUP hwOspfv3LinkLsdbGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ display their Link-scope link state database
+ for non-virtual interfaces."
+
+ GROUP hwOspfv3NotificationObjectGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ support OSPFv3 notifications."
+
+ GROUP hwOspfv3NotificationGroup
+ DESCRIPTION
+ "This group is required for OSPFv3 systems that
+ support OSPFv3 notifications."
+
+ OBJECT hwOspfv3RouterId
+ MIN-ACCESS read-only
+
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3AdminStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3ExtAreaLsdbLimit
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3ReferenceBandwidth
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3RestartSupport
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3RestartInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+
+ OBJECT hwOspfv3NotificationEnable
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+
+ OBJECT hwOspfv3AreaSummary
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3AreaRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3AreaStubMetric
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3AreaNssaTranslatorRole
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3AreaNssaTranslatorStabInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+
+ OBJECT hwOspfv3IfAreaId
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfAdminStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfRtrPriority
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfTransitDelay
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfRetransInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfHelloInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfRtrDeadInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfPollInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3IfMetricValue
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3VirtIfTransitDelay
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3VirtIfRetransInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3VirtIfHelloInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3VirtIfRtrDeadInterval
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3VirtIfRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3CfgNbrPriority
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3CfgNbrRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3AreaAggregateRowStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hwOspfv3AreaAggregateEffect
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ ::= { hwOspfv3Compliances 2 }
+
+
+ -- units of conformance
+
+ hwOspfv3BasicGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3RouterId,
+ hwOspfv3AdminStatus,
+ hwOspfv3VersionNumber,
+ hwOspfv3AreaBdrRtrStatus,
+ hwOspfv3AsBdrRtrStatus,
+ hwOspfv3AsScopeLsaCount,
+ hwOspfv3AsScopeLsaCksumSum,
+ hwOspfv3OriginateNewLsas,
+ hwOspfv3RxNewLsas,
+ hwOspfv3ExtLsaCount,
+ hwOspfv3ExtAreaLsdbLimit,
+ hwOspfv3RestartSupport,
+ hwOspfv3RestartInterval,
+ hwOspfv3RestartStatus,
+ hwOspfv3RestartAge,
+ hwOspfv3RestartExitRc,
+ hwOspfv3NotificationEnable,
+ hwOspfv3ReferenceBandwidth
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are used for managing/monitoring
+ OSPFv3 global parameters."
+ ::= { hwOspfv3Groups 1 }
+
+
+ hwOspfv3AreaGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3AreaImportAsExtern,
+ hwOspfv3AreaSpfRuns,
+ hwOspfv3AreaBdrRtrCount,
+ hwOspfv3AreaAsBdrRtrCount,
+ hwOspfv3AreaScopeLsaCount,
+ hwOspfv3AreaScopeLsaCksumSum,
+ hwOspfv3AreaSummary,
+ hwOspfv3AreaRowStatus,
+ hwOspfv3AreaStubMetric,
+ hwOspfv3AreaNssaTranslatorRole,
+ hwOspfv3AreaNssaTranslatorState,
+ hwOspfv3AreaNssaTranslatorStabInterval,
+ hwOspfv3AreaNssaTranslatorEvents
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are used for OSPFv3 systems
+ supporting areas."
+ ::= { hwOspfv3Groups 2 }
+
+ hwOspfv3AsLsdbGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3AsLsdbSequence,
+ hwOspfv3AsLsdbAge,
+ hwOspfv3AsLsdbChecksum,
+ hwOspfv3AsLsdbAdvertisement,
+ hwOspfv3AsLsdbTypeKnown
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are used for OSPFv3 systems
+ that display their AS-scope link state database."
+ ::= { hwOspfv3Groups 3 }
+
+ hwOspfv3AreaLsdbGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3AreaLsdbSequence,
+ hwOspfv3AreaLsdbAge,
+ hwOspfv3AreaLsdbChecksum,
+ hwOspfv3AreaLsdbAdvertisement,
+ hwOspfv3AreaLsdbTypeKnown
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are used for OSPFv3 systems
+ that display their Area-scope link state database."
+ ::= { hwOspfv3Groups 4 }
+
+ hwOspfv3LinkLsdbGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3LinkLsdbSequence,
+ hwOspfv3LinkLsdbAge,
+ hwOspfv3LinkLsdbChecksum,
+ hwOspfv3LinkLsdbAdvertisement,
+ hwOspfv3LinkLsdbTypeKnown
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are used for OSPFv3 systems
+ that display their Link-scope link state database."
+ ::= { hwOspfv3Groups 5 }
+
+
+
+ hwOspfv3IfGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3IfAreaId,
+ hwOspfv3IfType,
+ hwOspfv3IfAdminStatus,
+ hwOspfv3IfRtrPriority,
+ hwOspfv3IfTransitDelay,
+ hwOspfv3IfRetransInterval,
+ hwOspfv3IfHelloInterval,
+ hwOspfv3IfRtrDeadInterval,
+ hwOspfv3IfState,
+ hwOspfv3IfDesignatedRouter,
+ hwOspfv3IfBackupDesignatedRouter,
+ hwOspfv3IfEvents,
+ hwOspfv3IfRowStatus,
+ hwOspfv3IfMetricValue,
+ hwOspfv3IfLinkScopeLsaCount,
+ hwOspfv3IfLinkLsaCksumSum,
+ hwOspfv3IfPollInterval,
+ hwOspfv3IfMulticastForwarding
+ }
+ STATUS current
+ DESCRIPTION
+ "These interface objects used for
+ managing/monitoring OSPFv3 interfaces."
+ ::= { hwOspfv3Groups 6 }
+
+ hwOspfv3VirtIfGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3VirtIfIndex,
+ hwOspfv3VirtIfInstId,
+ hwOspfv3VirtIfTransitDelay,
+ hwOspfv3VirtIfRetransInterval,
+ hwOspfv3VirtIfHelloInterval,
+ hwOspfv3VirtIfRtrDeadInterval,
+ hwOspfv3VirtIfState,
+ hwOspfv3VirtIfEvents,
+ hwOspfv3VirtIfRowStatus,
+ hwOspfv3VirtIfLinkScopeLsaCount,
+ hwOspfv3VirtIfLinkLsaCksumSum
+ }
+ STATUS current
+ DESCRIPTION
+ "These virtual interface objects are used for
+ managing/monitoring OSPFv3 virtual interfaces."
+ ::= { hwOspfv3Groups 7 }
+
+ hwOspfv3NbrGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3NbrAddressType,
+ hwOspfv3NbrAddress,
+ hwOspfv3NbrOptions,
+ hwOspfv3NbrPriority,
+ hwOspfv3NbrState,
+ hwOspfv3NbrEvents,
+ hwOspfv3NbrLsRetransQLen,
+ hwOspfv3NbrHelloSuppressed,
+ hwOspfv3NbrIfId,
+ hwOspfv3NbrRestartHelperStatus,
+ hwOspfv3NbrRestartHelperAge,
+ hwOspfv3NbrRestartHelperExitRc
+ }
+ STATUS current
+ DESCRIPTION
+ "These neighbor objects are used for
+ managing/monitoring OSPFv3 neighbors."
+ ::= { hwOspfv3Groups 8 }
+
+ hwOspfv3CfgNbrGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3CfgNbrPriority,
+ hwOspfv3CfgNbrRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "These configured neighbor objects are used for
+ managing/monitoring OSPFv3 configured neighbors."
+ ::= { hwOspfv3Groups 9 }
+
+ hwOspfv3VirtNbrGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3VirtNbrIfIndex,
+ hwOspfv3VirtNbrIfInstId,
+ hwOspfv3VirtNbrAddressType,
+ hwOspfv3VirtNbrAddress,
+ hwOspfv3VirtNbrOptions,
+ hwOspfv3VirtNbrState,
+ hwOspfv3VirtNbrEvents,
+ hwOspfv3VirtNbrLsRetransQLen,
+ hwOspfv3VirtNbrHelloSuppressed,
+ hwOspfv3VirtNbrIfId,
+ hwOspfv3VirtNbrRestartHelperStatus,
+ hwOspfv3VirtNbrRestartHelperAge,
+ hwOspfv3VirtNbrRestartHelperExitRc
+ }
+ STATUS current
+ DESCRIPTION
+ "These virtual neighbor objects are used for
+ managing/monitoring OSPFv3 virtual neighbors."
+ ::= { hwOspfv3Groups 10 }
+
+ hwOspfv3AreaAggregateGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3AreaAggregateRowStatus,
+ hwOspfv3AreaAggregateEffect
+ }
+ STATUS current
+ DESCRIPTION
+ "These area aggregate objects used required for
+ aggregating OSPFv3 prefixes for summarization
+ across areas."
+ ::= { hwOspfv3Groups 11 }
+
+ hwOspfv3NotificationObjectGroup OBJECT-GROUP
+ OBJECTS {
+ hwOspfv3ConfigErrorType,
+ hwOspfv3PacketType,
+ hwOspfv3PacketSrc,
+ hwOspfv3IfName,
+ hwOspfv3IfStateChgReason,
+ hwOspfv3NbrStateChgReason,
+ hwOspfv3ProcessId,
+ hwOspfv3AreaIdIndex,
+ hwOspfv3NewRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "These objects are used to record notification
+ parameters"
+ ::= { hwOspfv3Groups 12 }
+
+ hwOspfv3NotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ hwOspfv3VirtIfStateChange,
+ hwOspfv3NbrStateChange,
+ hwOspfv3VirtNbrStateChange,
+ hwOspfv3IfConfigError,
+ hwOspfv3VirtIfConfigError,
+ hwOspfv3IfRxBadPacket,
+ hwOspfv3VirtIfRxBadPacket,
+ hwOspfv3IfStateChange,
+ hwOspfv3RestartStatusChange,
+ hwOspfv3NbrRestartHelperStatusChange,
+ hwOspfv3VirtNbrRestartHelperStatusChange,
+ hwOspfv3NssaTranslatorStatusChange,
+ hwOspfv3LastAuthKeyExpiry,
+ hwOspfv3AuthSequenceNumWrap,
+ hwOspfv3IntraAreaRouterIdConflictRecovered,
+ hwOspfv3PeerFlappingSuppressStatusChange,
+ hwOspfv3ImportAseRouteThreshold,
+ hwOspfv3ImportAseRouteThresholdClear,
+ hwOspfv3ImportAseRouteExceed,
+ hwOspfv3ImportAseRouteExceedClear,
+ hwOspfv3ImportNssaRouteThreshold,
+ hwOspfv3ImportNssaRouteThresholdClear,
+ hwOspfv3ImportNssaRouteExceed,
+ hwOspfv3ImportNssaRouteExceedClear,
+ hwOspfv3GreaterAgeLsaRecived,
+ hwOspfv3DeleteRouteByPurge,
+ hwOspfv3DeleteRouteByPurgeClear,
+ hwOspfv3RouteBeDeletedByPurgeExact,
+ hwOspfv3RouteBeDeletedByPurgeExactClear,
+ hwOspfv3RouteBeDeletedByPurgeInexact,
+ hwOspfv3RouteBeDeletedByPurgeInexactClear,
+ hwOspfv3RouteBeDeletedByPurge,
+ hwOspfv3RouteBeDeletedByPurgeClear,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeExact,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeExactClear,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeInexact,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeInexactClear,
+ hwOspfv3ThirdPartRouteBeDeletedByPurge,
+ hwOspfv3ThirdPartRouteBeDeletedByPurgeClear
+ }
+ STATUS current
+ DESCRIPTION
+ "This group is used for OSPFv3 notifications"
+ ::= { hwOspfv3Groups 13 }
+
+ END
\ No newline at end of file |