diff options
Diffstat (limited to 'MIBS/fs/NSCRTV-EPONEOC-EPON-MIB')
| -rw-r--r-- | MIBS/fs/NSCRTV-EPONEOC-EPON-MIB | 312 |
1 files changed, 312 insertions, 0 deletions
diff --git a/MIBS/fs/NSCRTV-EPONEOC-EPON-MIB b/MIBS/fs/NSCRTV-EPONEOC-EPON-MIB new file mode 100644 index 0000000..8259bb3 --- /dev/null +++ b/MIBS/fs/NSCRTV-EPONEOC-EPON-MIB @@ -0,0 +1,312 @@ +
+NSCRTV-EPONEOC-EPON-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ BridgeId, Timeout
+ FROM BRIDGE-MIB
+ IpAddress, Unsigned32, Integer32, Counter32,OBJECT-TYPE, TimeTicks, Gauge32, Counter64,
+ MODULE-IDENTITY, OBJECT-IDENTITY, enterprises
+ FROM SNMPv2-SMI
+ DateAndTime, MacAddress, TimeStamp, RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION
+ FROM SNMPv2-TC;
+
+
+nscrtvRoot OBJECT IDENTIFIER ::= { enterprises 17409 }
+
+-- DESCRIPTION
+-- "nscrtvRoot定义全国广电设备管理MIB根节点。"
+
+nscrtvHFCemsTree OBJECT IDENTIFIER ::= { nscrtvRoot 1 }
+nscrtvEponEocTree OBJECT IDENTIFIER ::= { nscrtvRoot 2}
+-- DESCRIPTION
+-- "nscrtvEponEocTree定义EPON、EoC管理系统MIB根节点,"
+-- "所有EPON、EoC系统的MIB均应在该节点下定义。"
+
+propertyIdent OBJECT IDENTIFIER ::= { nscrtvEponEocTree 1}
+-- DESCRIPTION
+-- "属性(Property)MIB的分支节点标识。"
+
+alarmsIdent OBJECT IDENTIFIER ::= { nscrtvEponEocTree 2}
+
+-- DESCRIPTION
+-- "告警(Alarms)MIB的分支节点标识。"
+
+eponTree OBJECT IDENTIFIER ::= { nscrtvEponEocTree 3}
+
+-- DESCRIPTION
+-- "EPON MIB的分支节点标识。"
+
+eoCTree OBJECT IDENTIFIER ::= { nscrtvEponEocTree 4}
+
+-- DESCRIPTION
+-- "EoC MIB的分支节点标识。"
+
+
+ eponAlarmTree OBJECT IDENTIFIER ::= { alarmsIdent 11 }
+
+ eponTrapObjectGroup OBJECT IDENTIFIER ::= { eponAlarmTree 1 }
+
+ eponAlarmObjGroup OBJECT IDENTIFIER ::= { eponAlarmTree 2 }
+
+ eponManagementObjGroup OBJECT IDENTIFIER ::= { eponAlarmTree 3 }
+
+
+ systemObjects OBJECT IDENTIFIER ::= { eponTree 1 }
+
+ sniObjects OBJECT IDENTIFIER ::= { eponTree 2 }
+
+ ponPortObjects OBJECT IDENTIFIER ::= { eponTree 3 }
+
+ onuObjects OBJECT IDENTIFIER ::= { eponTree 4 }
+
+ uniObjects OBJECT IDENTIFIER ::= { eponTree 5 }
+
+ igmpManagementObjects OBJECT IDENTIFIER ::= { eponTree 6 }
+
+ vlanManagementObjects OBJECT IDENTIFIER ::= { eponTree 7 }
+
+ qosManagementObjects OBJECT IDENTIFIER ::= { eponTree 8 }
+
+ stpManagementObjects OBJECT IDENTIFIER ::= { eponTree 9 }
+
+ performanceStatisticObjects OBJECT IDENTIFIER ::= { eponTree 10 }
+
+ eponLinkedEoCManagementObjects OBJECT IDENTIFIER ::= { eponTree 11 }
+
+ EponDeviceIndex ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "
+ Epon olt/onu设备索引号。
+ ONU ID的组成（4字节）（高--低）
+ Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
+ Note:
+ ----
+ 1. OLT device must not be 0.
+ 2. Card here shall confirm the last byte definition of EponCardIndex
+ to indicate the main-slot and sub-slot index.
+ 3. Pon port must not be 0.
+ 4. The useful ONU logical ID MUST never be set to 0, where NUM of 0 has
+ another meaning, to indicate that the ONU logical ID is meaningless,
+ or said to not applied.
+
+ Usage guide:
+ -----------
+ This TC could be used for OLT SNI, OLT PON port, OLT ONU ID
+ ONU UNI, OLT device, trunk.
+ If the refered MIB object does not have clear definition,
+ refer to the following:
+ Applied Obj - Descriptions of Index
+ ------------------------------------------------------------------
+ OLT Pon Port - OnuNum shall be set to 0,
+ OLT SNI - Same as OLT Pon Port
+ OLT onu ID - Set OnuNUM to corresponding ONU logical ID
+ ONU UNI - Same as OLT ONU ID
+ OLT device - Set card, pon port and OnuNUM to 0
+ Trunk - Card to 0x3F, pon port to trunk ID, OnuNUM to 0
+ Olt device to corresponding ONU device
+ "
+ SYNTAX Unsigned32
+
+ EponCardIndex ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "
+ 板卡索引号
+ For easy presenting the chassis view by NMS, bCardIndex shall be formatted
+ in a following manner:
+ Four bytes of INTEGER, from the most significant byte to the least significant
+ bytes
+ -----------------------------------------------------------------------------
+ Reserved byte Reserved byte Reserved byte Sub-slot 2-bit Main-slot 6-bit
+ Notes:
+ -----
+ 1. Reserved bytes shall be set to 0.
+ 2. The main-slot shall be started from 1, and shall be in a consecutive manner,
+ for all slots, including service slots, control slots, switch slots, power
+ slots,FAN slots, etc.For example, 1, 2, 3
+ 3. The sub-slot shall be started from 1, and shall be in a consecutive manner.
+ For example, 1, 2. If no sub-slot concept of a main-slot, set to 0.
+4. For fixed device, if no slot concept, NE shall set both main-slot and sub-slot
+ to 0, to indicate this is meaningless. For modulized device, they MUST not be
+ set to 0.This definition shall applied to both OLT and ONU.
+5. For trunk, since there is no slot concept, set main-slot to all-1 and sub-slot
+ to 0. This definition shall applied to both OLT and ONU.
+
+ For example,
+ 0x00 00 00 0A, represents main-slot 10, no sub-slot
+ 0x00 00 00 42, represents main-slot 2, sub-slot 1
+ 0x00 00 00 3F, represents a trunk
+ "
+ SYNTAX Unsigned32
+
+ EponPortIndex ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "
+ Epon端口索引号
+ The device port number shall start from 1. Nunber 0 had specific meaning, stands
+ for portIndex is meaningless, for the situation defined.
+ "
+ SYNTAX INTEGER (0..255)
+
+ EponAlarmCode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Alarm codes, uniquely indentifies each kind of alarm.
+ Refer to EPON alarm definition table"
+ SYNTAX INTEGER (1..65535)
+
+ EponAlarmInstance ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "
+ Alarm instance, which define the detailed management object
+ reported the alarm. For example, OLT device 1, slot 2, port 3
+ reports a port down alarm.
+ It is represents in OCTET STRING format.
+ 1. The first four OCTET has same definition as EponDeviceIndex TC.
+ 2. The fifth OCTET is the slot definition of ONU, which shall
+ have same definition as last byte definition in EponCardIndex
+ TC.
+ 3. The sixth OCTET is the UNI port ID of ONU, which is similar to
+ EponPortIndex TC.
+ 4. The seventh and eighth OCTETS are reserved and shall be set to
+ 0 at any time, and shall be ignored by maangement system.
+ For example,
+ 0x01 02 03 04 05 06 00 00, represents OLT device 1, slot 2, port 3,
+ ONU logical ID 4, slot 5 UNI port 6 of the connected ONU.
+ "
+ SYNTAX OCTET STRING ( SIZE (8) )
+
+ EponSeverityType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "
+ 告警严重程度"
+ SYNTAX INTEGER
+ {
+ critical(1),
+ major(2),
+ minor(3),
+ warning(4),
+ info(5),
+ clear(6)
+ }
+
+ AutoNegotiationTechAbility ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Technology ability of auto negotiation. Refer to
+ clause 30.6.1.1.5 of IEEE 802.3 2005 edition"
+ SYNTAX BITS
+ {
+ tenBaseTFullDuplex(1),
+ tenBaseTHalfDuplex(2),
+ hundredBaseTFullDuplex(3),
+ hundredBaseTHalfDuplex(4),
+ thousandBaseTFullDuplex(5),
+ thousandBaseTHalfDuplex(6),
+ thousandBaseXFullDuplex(7),
+ thousandBaseXHalfDuplex(8),
+ fdxPause(9),
+ fdxApause(10),
+ fdxSpause(11),
+ fdxBpause(12)
+ }
+
+ TAddress ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "
+ First four octets sames definition of IpAddress, stands for NMS IP address
+ The last four octets same definition of INTEGER, stands for trap UDP port "
+ SYNTAX OCTET STRING (SIZE (8))
+
+ EponStats15MinRecordType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "15分钟性能统计记录的索引号
+ 索引号为0表示当前15分钟性能数据
+ 1..96表示历史的15分钟性能，1代表最新的数据，96代表最老的数据"
+ SYNTAX INTEGER (0..96)
+
+ EponStats24HourRecordType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "24小时性能统计记录的索引号
+ 索引号为0表示当前24小时性能数据
+ 1..30表示历史的24小时性能, 1代表最新的数据，30代表最老的数据"
+ SYNTAX INTEGER (0..30)
+
+ EponStatsThresholdType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "门限类型，见 性能量定义表
+ 1- InOctets
+ 2 InPkts
+ 3 InBroadcastPkts
+ 4 InMulticastPkts
+ 5 InPkts64Octets
+ 6 InPkts65to127Octets
+ 7 InPkts128to255Octets
+ 8 InPkts256to511Octets
+ 9 InPkts512to1023Octets
+ 10 InPkts1024to1518Octets
+ 11 InPkts1519to1522Octets
+ 12 InUndersizePkts
+ 13 InOversizePkts
+ 14 InFragments
+ 15 InMpcpFrames
+ 16 InMpcpOctets
+ 17 InOAMFrames
+ 18 InOAMOctets
+ 19 InCRCErrorPkts
+ 20 InDropEvents
+ 21 InJabbers
+ 22 InCollision
+ 23 OutOctets
+ 24 OutPkts
+ 25 OutBroadcastPkts
+ 26 OutMulticastPkts
+ 27 OutPkts64Octets
+ 28 OutPkts65to127Octets
+ 29 OutPkts128to255Octets
+ 30 OutPkts256to511Octets
+ 31 OutPkts512to1023Octets
+ 32 OutPkts1024to1518Octets
+ 33 OutPkts1519o1522Octets
+ 34 OutUndersizePkts
+ 35 OutOversizePkts
+ 36 OutFragments
+ 37 OutMpcpFrames
+ 38 OutMpcpOctets
+ 39 OutOAMFrames
+ 40 OutOAMOctets
+ 41 OutCRCErrorPkts
+ 42 OutDropEvents
+ 43 OutJabbers
+ 44 OutCollision
+ 50 Temperature
+
+ Note:
+ ----------------------------------------------------------------
+ 1. For 50 Temperature, this parameter shall only applied to
+ a. Slot level, for each service/switch/management card, for
+ chassis-based system.
+ b. Node-level, for fixed box.
+ 2. For 50 Temperature, shall be applied to both OLT and ONU
+ 3. For 50 Temperature, since no 15-min performance data collection
+ are required, system shall ensure the temperature polling interval
+ no less than 5 seconds. The alarm shall be only generated when the
+ threshold is acrossed for three continuous intervals, and shall be
+ cleared, when the threshold is not accrossed any more, for three
+ continous intervals.
+ "
+ SYNTAX INTEGER (1..1024)
+
+--
+-- END of NSCRTV-EPONEOC-EPON-MIB
+--
+
+END
|