diff options
Diffstat (limited to 'MIBS/extreme/EXTREME-QOS-MIB')
| -rw-r--r-- | MIBS/extreme/EXTREME-QOS-MIB | 588 |
1 files changed, 588 insertions, 0 deletions
diff --git a/MIBS/extreme/EXTREME-QOS-MIB b/MIBS/extreme/EXTREME-QOS-MIB new file mode 100644 index 0000000..1ac2746 --- /dev/null +++ b/MIBS/extreme/EXTREME-QOS-MIB @@ -0,0 +1,588 @@ + + + +-- =============================================================================== + +-- +-- Extreme QoS objects +-- + +EXTREME-QOS-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY FROM SNMPv2-SMI + OBJECT-TYPE FROM SNMPv2-SMI + TruthValue FROM SNMPv2-TC + DisplayString FROM RFC1213-MIB + RowStatus FROM SNMPv2-TC + ifIndex FROM RFC1213-MIB + extremeVlanIfIndex FROM EXTREME-VLAN-MIB + extremeAgent FROM EXTREME-BASE-MIB; + + extremeQos MODULE-IDENTITY + LAST-UPDATED "0007240000Z" + ORGANIZATION "Extreme Networks, Inc." + CONTACT-INFO "www.extremenetworks.com" + DESCRIPTION "Extreme Quality-of-Service objects" + ::= { extremeAgent 3 } + + extremeQosCommon OBJECT IDENTIFIER ::= { extremeQos 1 } + + + extremeUnitPaceMode OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(1), + normalEthernet(2), + lowLatency(3) + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This object specifies whether the device currently + recognises and gives priority treatment to the + forwarding of packets with the PACE(tm) bit set in + their MAC Source Address fields. + + PACE(tm) mode applies to the whole unit only and + is only valid when device is in Ingress QoS mode + as specified by extremeQosMode ingress(1). This + object will report notApplicable(1) when in + egress(2) mode. Set operations with value + notApplicable(1) will be rejected." + ::= { extremeQosCommon 1 } + +-- +-- Select QoS Mode +-- + extremeQosMode OBJECT-TYPE + SYNTAX INTEGER { ingress(1), egress(2) } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Indicates which QoS mode the device should + use. ingress(1) applies priority-based QoS based + on the incoming packet's destination IP or MAC + address, 802.1p priority, PACE(tm), Source Port or + VLAN. egress(2) applies priority- and bandwidth-based + QoS based on destination IP or MAC address or VLAN. + See ExtremeWare documentation for further information." + ::= { extremeQosCommon 4 } + +-- +-- Reset all QoS settings to defaults +-- + extremeQosUnconfigure OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Setting this to true will reset all QoS settings + in the device to factory defaults. Reads from this + value return an undefined value." + ::= { extremeQosCommon 5 } + + +-- +-- QoS Profile table +-- + + extremeQosProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExtremeQosProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists QoS profiles." + ::= { extremeQosCommon 6 } + + extremeQosProfileEntry OBJECT-TYPE + SYNTAX ExtremeQosProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An individual QoS profile Entry." + INDEX {extremeQosProfileIndex} + ::= {extremeQosProfileTable 1} + + ExtremeQosProfileEntry ::= SEQUENCE { + extremeQosProfileIndex INTEGER, + extremeQosProfileName DisplayString, + extremeQosProfileMinBw INTEGER, + extremeQosProfileMaxBw INTEGER, + extremeQosProfilePriority INTEGER, + extremeQosProfileRowStatus RowStatus + } + + extremeQosProfileIndex OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + qos table." + ::= { extremeQosProfileEntry 1} + + extremeQosProfileName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..127)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A unique qos profile name." + ::= {extremeQosProfileEntry 2} + + extremeQosProfileMinBw OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The minumum percentage of bandwidth that this queue requires. + The Switch is required to provide the minumum amount of + bandwidth to the queue. The lowest possible value is 0%." + DEFVAL { 0 } + ::= {extremeQosProfileEntry 3 } + + + extremeQosProfileMaxBw OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum percentage of bandwidth that this queue is + permitted to use. + + If a non-default value is set for this object then it negates + any previously set value of extremeQosProfileMaxSustBwBps. In + In addition, a set operation that supplies non-default values + for both this object and for extremeQosProfileMaxSustBwBps + will be rejected by the agent. In other words, you may supply + either an absolute or a percent limit, not both." + DEFVAL { 100 } + ::= {extremeQosProfileEntry 4 } + + extremeQosProfilePriority OBJECT-TYPE + SYNTAX INTEGER { + low(1), + lowHi(2), + normal(3), + normalHi(4), + medium(5), + mediumHi(6), + high(7), + highHi(8) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The level of priority in which this queue will be + serviced by the Switch." + ::= {extremeQosProfileEntry 5 } + + extremeQosProfileRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the extremeQosProfile entry. + This object can be set to: + active(1) + createAndGo(4) + createAndWait(5) + destroy(6) + + The following values may be read: + active(1) + notInService(2) + notReady(3). + + Setting this object to createAndGo(4) causes the agent + to attempt to create and commit the row based on + the contents of the objects in the row. If all necessary + information is present in the row and the values are + acceptible to the agent, the agent will change the + status to active(1). If any of the necessary objects + are not available, the agent will reject the creation + request. + + Setting this object to createAndWait(5) causes a row + in this table to be created. The agent sets the + status to notInService(2) if all of the information is + present in the row and the values are acceptable to the + agent; otherwise, the agent sets the status to notReady(3). + + Setting this object to active(1) is only valid when + the current status is active(1) or notInService(2). + + When the state of the row transitions is set to active(1), + the agent creates the corresponding row in the ifTable.. + + Setting this object to destroy(6) will remove the + corresponding QoS Profile Entry. + + In order for a set of this object to destroy(6) to succeed, + all dependencies on this row must have been removed. These + will include any stacking dependencies in the ifStackTable + and any protocol specific tables dependencies." + ::= { extremeQosProfileEntry 6 } + +-- +-- VLAN-based QoS Table +-- + extremeQosByVlanMappingTable OBJECT-TYPE + + SYNTAX SEQUENCE OF ExtremeQosByVlanMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table to associate a Vlan with the QoS profile that the + Vlan is using. Every Vlan is assigned a Qos Profile and + hence there is an entry in this table corresponding to every + entry in the extremeVlanIfTable." + ::= { extremeQosCommon 7 } + + extremeQosByVlanMappingEntry OBJECT-TYPE + SYNTAX ExtremeQosByVlanMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The QoS associated with a particular Vlan." + INDEX {extremeVlanIfIndex} + ::= {extremeQosByVlanMappingTable 1} + + ExtremeQosByVlanMappingEntry ::= SEQUENCE { + extremeQosByVlanMappingQosProfileIndex INTEGER + } + + extremeQosByVlanMappingQosProfileIndex OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Value of extremeQosProfileIndex that uniquely + identifies a QoS Profile entry in extremeQosProfileTable. + This indicates the QoS to be given to traffic for this + Vlan in the absence of any other more specific + configuration information for this traffic." + ::= { extremeQosByVlanMappingEntry 1 } + +-- +-- Per Port QOS Table +-- + extremePerPortQosTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExtremePerPortQosEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Global Qos Profiles are defined in the + extremeQosProfileTable. This table contains a list + of ports for which the definition of certain global + Qos Profiles has been overridden. The new definition + of the Qos profile parameters is in this table." + ::= { extremeQosCommon 8 } + + extremePerPortQosEntry OBJECT-TYPE + SYNTAX ExtremePerPortQosEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An individual overridden QoS profile Entry." + INDEX {ifIndex, extremePerPortQosIndex} + ::= {extremePerPortQosTable 1} + + ExtremePerPortQosEntry ::= SEQUENCE { + extremePerPortQosIndex INTEGER, + extremePerPortQosMinBw INTEGER, + extremePerPortQosMaxBw INTEGER, + extremePerPortQosPriority INTEGER, + extremePerPortQosRowStatus RowStatus + } + + extremePerPortQosIndex OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this variable is the same as the value + of extremeQosProfileIndex of the Qos Profile which + is overridden (for the port specified by ifIndex) by + the definition in this table." + ::= { extremePerPortQosEntry 1} + + extremePerPortQosMinBw OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The minumum percentage of bandwidth that this queue on the + specified port requires. The Switch is required to provide + the minumum amount of bandwidth to the queue. The lowest + possible value is 0%." + DEFVAL { 0 } + ::= {extremePerPortQosEntry 2 } + + + extremePerPortQosMaxBw OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum percentage of bandwidth that this queue on the + specified port is permitted to use." + DEFVAL { 100 } + ::= {extremePerPortQosEntry 3 } + + extremePerPortQosPriority OBJECT-TYPE + SYNTAX INTEGER { + low(1), + lowHi(2), + normal(3), + normalHi(4), + medium(5), + mediumHi(6), + high(7), + highHi(8) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The level of priority in which this queue will be + serviced by the Switch." + ::= {extremePerPortQosEntry 4 } + + extremePerPortQosRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the extremePerPortQos entry. + This object can be set to + active(1) + createAndGo(4) + The following value may be read: + active(1) + Note that a destroy(6) is not supported. A row will only be + deleted from this table when the Qos Profile indicated + in that row is changed globally." + + ::= { extremePerPortQosEntry 5 } + + +-- +-- QoS Ingress Priority +-- + extremeQosIngressPriorityTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExtremeQosIngressPriorityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists QoS ingress priority settings." + ::= { extremeQosCommon 9 } + + extremeQosIngressPriorityEntry OBJECT-TYPE + SYNTAX ExtremeQosIngressPriorityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An individual QoS ingress priority Entry." + INDEX {extremeQosIngressPriorityIndex} + ::= {extremeQosIngressPriorityTable 1} + + ExtremeQosIngressPriorityEntry ::= SEQUENCE { + extremeQosIngressPriorityIndex INTEGER, + extremeQosIngressPriorityName DisplayString, + extremeQosIngressPriorityValue INTEGER + } + + extremeQosIngressPriorityIndex OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + qos ingress priority table." + ::= { extremeQosIngressPriorityEntry 1} + + extremeQosIngressPriorityName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A qos ingress priority name." + ::= {extremeQosIngressPriorityEntry 2} + + extremeQosIngressPriorityValue OBJECT-TYPE + SYNTAX INTEGER (0..15) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ingress Qos priority value." + ::= { extremeQosIngressPriorityEntry 3} + + +-- +-- IQoS Profile table +-- + + extremeIQosProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExtremeIQosProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists ingress QoS profiles." + ::= { extremeQosCommon 10 } + + extremeIQosProfileEntry OBJECT-TYPE + SYNTAX ExtremeIQosProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An individual ingress QoS profile Entry." + INDEX {ifIndex , + extremeIQosProfileIndex} + ::= {extremeIQosProfileTable 1} + + ExtremeIQosProfileEntry ::= SEQUENCE { + extremeIQosProfileIndex INTEGER, + extremeIQosProfileName DisplayString, + extremeIQosProfileMinBwType INTEGER, + extremeIQosProfileMinBw INTEGER, + extremeIQosProfileMaxBwType INTEGER, + extremeIQosProfileMaxBw INTEGER, + extremeIQosProfileRED INTEGER, + extremeIQosProfileMaxBuf INTEGER + } + + extremeIQosProfileIndex OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + ingress Qos table." + ::= { extremeIQosProfileEntry 1} + + extremeIQosProfileName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..127)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique ingress Qos profile name." + ::= {extremeIQosProfileEntry 2} + + extremeIQosProfileMinBwType OBJECT-TYPE + SYNTAX INTEGER { + percentage(1), + kbps(2), + mbps(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the current minimum bandwith setting. A value + of 1 signifies that the minimum bandwith value is a percentage + of the configurable port bandwidth. A value of 2 or 3 signifies + a guaranteed minimum available bandwidth in Kbps or Mbps + respectively." + ::= {extremeIQosProfileEntry 3 } + + extremeIQosProfileMinBw OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The guaranteed minimum bandwidth for this queue, expressed as either + a percentage or a specific bandwidth value, as specified by the value + of extremeIQosProfileMinBwType." + DEFVAL { 0 } + ::= {extremeIQosProfileEntry 4 } + + extremeIQosProfileMaxBwType OBJECT-TYPE + SYNTAX INTEGER { + percentage(1), + kbps(2), + mbps(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the current maximum bandwith setting. A value + of 1 signifies that the maximum bandwith value is a percentage + of the configurable port bandwidth. A value of 2 or 3 signifies + a maximum allowed bandwidth in Kbps or Mbps respectively." + ::= {extremeIQosProfileEntry 5 } + + extremeIQosProfileMaxBw OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum allowed input bandwidth for this queue, expressed as + either a percentage or a specific bandwidth value, as specified by + the value of extremeIQosProfileMaxBwType." + DEFVAL { 0 } + ::= {extremeIQosProfileEntry 6 } + + extremeIQosProfileRED OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Random Early Drop threshold. When the input queue fill + ratio exceeds this percentage, frames start to drop randomly + with a linear increasing drop probability as the queue fill + count approaches the max queue size. A value of 100 indicates + that this feature is currently disabled." + ::= {extremeIQosProfileEntry 7 } + + extremeIQosProfileMaxBuf OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The percentage of the total ingress queue size to use. Lower values + can be used to reduce the max latency through this queue, but with + potentially greater loss with bursty traffic." + ::= { extremeIQosProfileEntry 8 } + + +-- +-- VLAN-based Ingress QoS Table +-- + extremeIQosByVlanMappingTable OBJECT-TYPE + + SYNTAX SEQUENCE OF ExtremeIQosByVlanMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table to associate a Vlan with the ingress QoS profile + that the Vlan is using. Every Vlan is assigned a Qos Profile + and hence there is an entry in this table corresponding to + every entry in the extremeVlanIfTable." + ::= { extremeQosCommon 11 } + + extremeIQosByVlanMappingEntry OBJECT-TYPE + SYNTAX ExtremeIQosByVlanMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ingress QoS associated with a particular Vlan." + INDEX {extremeVlanIfIndex} + ::= {extremeIQosByVlanMappingTable 1} + + ExtremeIQosByVlanMappingEntry ::= SEQUENCE { + extremeIQosByVlanMappingIQosProfileIndex INTEGER + } + + extremeIQosByVlanMappingIQosProfileIndex OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Value of extremeIQosProfileIndex that uniquely + identifies an ingress QoS Profile entry in extremeIQosProfileTable. + This indicates the QoS to be given to traffic for this + Vlan in the absence of any other more specific + configuration information for this traffic." + ::= { extremeIQosByVlanMappingEntry 1 } + + + +END |