diff options
Diffstat (limited to 'MIBS/equallogic/SCSI-MIB')
| -rw-r--r-- | MIBS/equallogic/SCSI-MIB | 2548 |
1 files changed, 2548 insertions, 0 deletions
diff --git a/MIBS/equallogic/SCSI-MIB b/MIBS/equallogic/SCSI-MIB new file mode 100644 index 0000000..b0d636f --- /dev/null +++ b/MIBS/equallogic/SCSI-MIB @@ -0,0 +1,2548 @@ + +-- +-- Copyright (c) 2002 by EqualLogic, Inc. +-- +-- All rights reserved. This software may not be copied, disclosed, +-- transferred, or used except in accordance with a license granted +-- by EqualLogic, Inc. This software embodies proprietary information +-- and trade secrets of EqualLogic, Inc. +-- + + SCSI-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + Integer32, Unsigned32, Counter32, + Counter64, Gauge32, + mib-2 FROM SNMPv2-SMI + TEXTUAL-CONVENTION, TimeStamp, TruthValue, + RowStatus, RowPointer, AutonomousType FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + SnmpAdminString FROM SNMP-FRAMEWORK-MIB; + + + + scsiModule MODULE-IDENTITY + LAST-UPDATED "200202250000Z" -- 25 February 2002 + ORGANIZATION "IETF" + CONTACT-INFO " + Michele Hallak-Stamler + + Sanrad Intelligent Network + 32 Habarzel Street + Tel Aviv, Israel + + Phone: +972 3 7674809 + E-mail: michele@sanrad.com + + + Yaron Lederman + Siliquent Technologies Ltd. + 33 Bezalel Street + Ramat Gan, Israel + + Phone: +972 3 7552320 + E-mail: yaronl@siliquent.com + + Mark Bakke + Postal: Cisco Systems, Inc + 6450 Wedgwood Road, Suite 130 + Maple Grove, MN + USA 55311 + + Phone: +1 763-398-1000 + Fax: +1 763-398-1001 + E-mail: mbakke@cisco.com + + Marjorie Krueger + Postal: Hewlett-Packard + Networked Storage Architecture + Networked Storage Solutions Org. + 8000 Foothills Blvd. + Roseville, CA 95747 + + Phone: +1 916-785-2656 + Phone: +1 916-785-0391 + E-mail: marjorie_krueger@hp.com + + Keith McCloghrie + Cisco Systems, Inc. + Postal: 170 West Tasman Drive + San Jose, CA USA 95134 + + Phone: +1 408 526-5260 + E-mail: kzm@cisco.com + + " + DESCRIPTION + "The SCSI MIB" + + -- Revision History + + REVISION "200202250000Z" + DESCRIPTION " Initial version published as RFC nnnn." + + ::= { mib-2 999} -- must be changed in the future + + + ---------------------- Textual Conventions ------------------------- + ScsiLUNOrZero ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + " This Textual Convention represents either a SCSI Logical + Unit Number (LUN) or a zero-length string. Objects defined + with this syntax must specify the meaning of the zero-length + string. The format of a LUN is: + - a zero-length octet string or + - a string of two octets if the underlying transport protocol + is SBP-3 or SPI-4 using data group transfers or + - a string of eight octets for all other cases." + SYNTAX OCTET STRING (SIZE (0 | 2 | 8)) + + ScsiIndexValue ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + " An arbitrary integer value, greater than zero, for use as a + unique index value." + SYNTAX Unsigned32(1..4294967295) + + ScsiPortIndexValueOrZero ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This textual convention is an extension of the + ScsiIndexValue convention. The latter defines a greater than + zero value used to identify an index. This extension permits + the additional value of zero and is applicable only to + indices of SCSI port. Usage of the zero is object-specific + and must therefore be defined as part of the description of + any object, which uses this syntax. Examples of the usage of + zero might include situations where index was unknown, or + when none or all indices need to be referenced." + SYNTAX Unsigned32(0..4294967295) + + ScsiIndexValueOrZero ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This textual convention is an extension of the + ScsiIndexValue convention. The latter defines a greater than + zero value used to identify an index. This extension permits + the additional value of zero. Usage of the zero is object- + specific and must therefore be defined as part of the + description of any object, which uses this syntax. Examples + of the usage of zero might include situations where index was + unknown, or when none or all indices need to be referenced." + SYNTAX Unsigned32(0..4294967295) + + ScsiIdentifier ::= TEXTUAL-CONVENTION + STATUS current + + DESCRIPTION + "This Textual Convention represents a generic SCSI device or + port identifier. + The format depends on the transport used: + - SPI: only bits:0-3 for a port identifier (LSB is 0 and MSB + is 3). Other bits must be zero. + - SPI: identifier of a device is a zero-length octet string. + - FCP: 3 bytes for a port identifier + - FCP: identifier of a device is a zero-length octet string. + - SRP: 16 bytes for a port identifier. + - SRP: it is a zero-length octet string for a device + identifier. + - iSCSI: 256 bytes for a device identifier. + - iSCSI: 258 bytes for a target port identifier. + - iSCSI: 262 bytes for an initiator port identifier. + - SBP: it is a zero-length octet string for a device + identifier. + - SBP: 2 bytes for an initiator port identifier. + - SBP: 11 bytes for a target port identifier. " + SYNTAX OCTET STRING (SIZE (0 | 1 | 2 | 3| 11 | 16 | 256| 258|262)) + + ScsiName ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + " This Textual Convention represents a generic SCSI device or + port name. + The format depends on the transport used: + - SPI: it is a zero-length octet string for a device or port + name. + - FCP: 8 bytes for a port name. + - FCP: it is a zero-length octet string for a device name. + - SRP: 16 bytes for a port name. + - SRP: it is a zero-length octet string for a device name. + - iSCSI: 256 bytes for a device name. + - iSCSI: 258 bytes for a target port name. + - iSCSI: 262 bytes for an initiator port name. + - SBP: it is a zero-length octet string for a device name. + - SBP: 8 bytes for an initiator port name. + - SBP: 11 bytes for a target port name. " + SYNTAX OCTET STRING (SIZE (0 | 8 | 11 |16 | 256 | 258| 262)) + + ScsiNameIdOrZero ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + " This Textual Convention represents either the SCSI name of + a logical unit or a zero-length string. Objects defined with + this syntax must specify the meaning of the zero-length + string. The format of the name of a LU is: + - a zero-length octet string or + - a string of eight octets." + SYNTAX OCTET STRING (SIZE (0 | 8)) + + ScsiDeviceOrPort ::= TEXTUAL-CONVENTION + + STATUS current + DESCRIPTION + "This type specifies whether a particular configuration is + applicable to a port or to a device." + SYNTAX INTEGER { + device(1), + port(2), + other(3) + } + + ScsiIdCodeSet ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This Textual Convention specifies the code set in use with + this identifier. + The format is the same as contained in the identifier's + Identification Descriptor within the Logical Unit's Device + Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18 + July 2001 Chapter 8: section 8.4.4, page 210 Vital Product + Data Parameters [16]" + SYNTAX Unsigned32(0..15) + + ScsiIdAssociation ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This Textual Convention specifies what the identifier is + associated with (e.g, with the addressed physical/logical + device or with a particular port). + The format is the same as contained in the identifier's + Identification Descriptor within the Logical Unit's Device + Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18 + July 2001 - Chapter 8: section 8.4.4, page 210 Vital Product + Data Parameters [16]" + SYNTAX Unsigned32(0..3) + + ScsiIdType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This Textual Convention specifies the type of the + identifier. + The format is the same as contained in the identifier's + Identification Descriptor within the Logical Unit's Device + Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, + Chapter 8: section 8.4.4, page 210 Vital Product Data + Parameters [16]" + SYNTAX Unsigned32(0..15) + + + ScsiIdValue ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This Textual Convention represents an identifier. The + objects of type ScsiIdCodeSet, ScsIdAssociation, ScsiIdType, + define together the format. + The format is the same as contained in the identifier's + Identification Descriptor within the Logical Unit's Device + Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, 18 + July 2001 - Chapter 8: section 8.4.4, page 210 Vital Product + Data Parameters [16]" + SYNTAX OCTET STRING (SIZE (0..255)) + + + HrSWInstalledIndexOrZero ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The index value for a software module's row in the Host + Resources MIB's hrSWInstalledTable. A zero value indicates + that no row in the hrSWInstalledTable is applicable." + REFERENCE + "hrSWInstalledTable is defined in the Host Resources MIB, RFC + 2790." + SYNTAX Integer32 (0..2147483647) + + ----------------------- Structure of the MIB ---------------------- + + scsiObjects OBJECT IDENTIFIER ::= { scsiModule 1 } + scsiNotifications OBJECT IDENTIFIER ::= { scsiModule 2 } + scsiConformance OBJECT IDENTIFIER ::= { scsiModule 3 } + + scsiTransportTypes OBJECT IDENTIFIER ::= { scsiObjects 1 } + scsiGeneral OBJECT IDENTIFIER ::= { scsiObjects 2 } + scsiInitiator OBJECT IDENTIFIER ::= { scsiObjects 3 } + scsiTarget OBJECT IDENTIFIER ::= { scsiObjects 4 } + scsiLogicalUnit OBJECT IDENTIFIER ::= { scsiObjects 5 } + + + -- Transport Types + scsiTranportOther OBJECT IDENTIFIER ::= { scsiTransportTypes 1 } + scsiTranportSPI OBJECT IDENTIFIER ::= { scsiTransportTypes 2 } + scsiTransportFCP OBJECT IDENTIFIER ::= { scsiTransportTypes 3 } + scsiTransportSRP OBJECT IDENTIFIER ::= { scsiTransportTypes 4 } + scsiTransportISCSI OBJECT IDENTIFIER ::= { scsiTransportTypes 5 } + scsiTransportSBP OBJECT IDENTIFIER ::= { scsiTransportTypes 6 } + + + ----------------------- Instance Table ----------------------------- + scsiInstanceTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiInstanceEntry + MAX-ACCESS not-accessible + + STATUS current + DESCRIPTION + "A list of SCSI instances present on the system. + The SCSI Instance is the top-level entity, to which + everything else belongs. An SNMP agent could represent more + than one instance if it represents either a stack of devices, + or virtual partitions of a larger device, or a host running + multiple SCSI implementations from different vendors." + ::= { scsiGeneral 1 } + + scsiInstanceEntry OBJECT-TYPE + SYNTAX ScsiInstanceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) containing management information applicable + to a particular SCSI instance." + INDEX { scsiInstIndex } + ::= { scsiInstanceTable 1 } + + ScsiInstanceEntry::= SEQUENCE { + scsiInstIndex ScsiIndexValue, + scsiInstAlias SnmpAdminString, + scsiInstSoftwareIndex HrSWInstalledIndexOrZero, + scsiInstVendorVersion SnmpAdminString, + scsiInstScsiNotificationsEnable TruthValue + } + + scsiInstIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object represents an arbitrary integer used to uniquely + identify a particular SCSI instance." + ::= { scsiInstanceEntry 1 } + + scsiInstAlias OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..79)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents an administrative string, configured + by the administrator. It can be a zero-length string." + ::= { scsiInstanceEntry 2 } + + scsiInstSoftwareIndex OBJECT-TYPE + SYNTAX HrSWInstalledIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If this management instance corresponds to an installed + software module, then this object's value is the value of the + + hrSWInstalledIndex of that module. If there is no + correspondence to an installed software module (or no module + which has a hrSWInstalledIndex value), then the value of this + object is zero." + REFERENCE + "hrSWInstalledIndex is defined in the Host Resources MIB, RFC + 2790." + ::= { scsiInstanceEntry 3 } + + scsiInstVendorVersion OBJECT-TYPE + SYNTAX SnmpAdminString(SIZE(0..79)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents a text string set by the manufacturer + describing the version of this instance. The format of this + string is determined solely by the manufacturer, and is for + informational purposes only. It is unrelated to the SCSI + specification version numbers." + ::= { scsiInstanceEntry 4 } + + scsiInstScsiNotificationsEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object allows to enable/disable sending all the + notifications defined in this MIB." + DEFVAL { true } + ::= { scsiInstanceEntry 5 } + + + scsiDeviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of SCSI Devices present on the system." + ::= { scsiGeneral 2 } + + scsiDeviceEntry OBJECT-TYPE + SYNTAX ScsiDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) containing management information applicable + to a particular SCSI Device included in this SCSI manageable + instance." + INDEX { scsiInstIndex, scsiDeviceIndex } + ::= { scsiDeviceTable 1 } + + ScsiDeviceEntry::= SEQUENCE { + + scsiDeviceIndex ScsiIndexValue, + scsiDeviceAlias SnmpAdminString, + scsiDeviceRole BITS, + scsiDevicePortNumber Unsigned32, + scsiDeviceResets Counter32 + } + + scsiDeviceIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " This object is an arbitrary integer used to uniquely + identify a particular device within a particular SCSI + instance." + ::= { scsiDeviceEntry 1 } + + scsiDeviceAlias OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..79)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " This object represents is an admistrative name for this + device. If no name is assigned, the value of this object is + the zero-length string." + ::= { scsiDeviceEntry 2 } + + scsiDeviceRole OBJECT-TYPE + SYNTAX BITS { + target(0), + initiator(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object determines whether this device is acting as an + initiator device, or as a target device or as both." + ::= { scsiDeviceEntry 3 } + + scsiDevicePortNumber OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the number of ports contained in this + device." + ::= { scsiDeviceEntry 4 } + + scsiDeviceResets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + "This object represents the number of times that this device + has reset." + ::= { scsiDeviceEntry 5 } + + + ----------------------- Port Table --------------------------------- + scsiPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of SCSI Ports for each SCSI device in each instance." + ::= { scsiGeneral 3 } + + scsiPortEntry OBJECT-TYPE + SYNTAX ScsiPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) containing management information applicable + to a particular SCSI port of a particular SCSI device in a + particular SCSI instance." + INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex } + ::= { scsiPortTable 1 } + + ScsiPortEntry ::= SEQUENCE { + scsiPortIndex ScsiIndexValue, + scsiPortRole BITS, + scsiPortTrnsptPtr OCTET STRING, -- was RowPointer, + scsiPortBusyStatuses Counter32 + } + + scsiPortIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary integer used to uniquely identify a particular + port of a given device within a particular SCSI instance." + ::= { scsiPortEntry 1 } + + scsiPortRole OBJECT-TYPE + SYNTAX BITS { + target(0), + initiator(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates whether this port is acting as an + initiator port, or as a target port or as both." + ::= { scsiPortEntry 2 } + + + scsiPortTrnsptPtr OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1..255)) -- was RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is a pointer to the corresponding row in the + scsiTrnsptTable" + ::= { scsiPortEntry 3 } + + scsiPortBusyStatuses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the number of port busy status sent + or received by this port. Note: Initiator ports only receive + busy status and target ports only send busy status." + ::= { scsiPortEntry 4 } + + scsiTrnsptTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiTrnsptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains a list of transports in use with each + SCSI device." + ::= { scsiGeneral 5 } + + scsiTrnsptEntry OBJECT-TYPE + SYNTAX ScsiTrnsptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) containing parameters applicable to a + transport used by a particular device of a particular SCSI + manageable instance." + INDEX { scsiInstIndex, scsiDeviceIndex, scsiTrnsptIndex} + ::= { scsiTrnsptTable 1 } + + ScsiTrnsptEntry ::= SEQUENCE { + scsiTrnsptIndex ScsiIndexValue, + scsiTrnsptType OCTET STRING, -- was AutonomousType, + scsiTrnsptPointer OCTET STRING, -- was RowPointer, + scsiTrnsptDevName ScsiName + } + + scsiTrnsptIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + + "An arbitrary integer used to uniquely identify a particular + transport within a given device within a particular SCSI + instance." + ::= { scsiTrnsptEntry 1 } + + scsiTrnsptType OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..255)) -- was AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the type of transport for this + particular transport." + ::= { scsiTrnsptEntry 2 } + + scsiTrnsptPointer OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1..255)) -- was RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents a pointer to a conceptual row in a + 'transport' MIB allowing a manager to get useful information + for the transport described by this entry. + For example, if the transport of this device is iSCSI, this + object will point to the iSCSI Instance of the iSCSI MIB. + If there is no MIB for this transport, this object has the + value 0.0." + ::= { scsiTrnsptEntry 3 } + + + scsiTrnsptDevName OBJECT-TYPE + SYNTAX ScsiName + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the name of this device in one of + the format(s) appropriate for this type of transport." + ::= { scsiTrnsptEntry 4 } + + + ----------------------- Initiator Device Table --------------------- + scsiIntrDevTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiIntrDevEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains information for each local initiator + device." + ::= { scsiInitiator 1} + + scsiIntrDevEntry OBJECT-TYPE + SYNTAX ScsiIntrDevEntry + MAX-ACCESS not-accessible + STATUS current + + DESCRIPTION + "An entry (row) containing information applicable to an + initiator device within a particular SCSI instance." + INDEX { scsiInstIndex, scsiDeviceIndex } + ::= { scsiIntrDevTable 1 } + + ScsiIntrDevEntry ::= SEQUENCE { + scsiIntrDevTgtAccessMode INTEGER, + scsiIntrDevOutResets Counter32 + } + + scsiIntrDevTgtAccessMode OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + autoEnable(2), + manualEnable(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object controls whether a discovered target is + immediately authorized or not: + - autoEnable (2) means that when an initiator discovers a + target, it can use it immediately, + - manualEnable (3) means that the initiator must wait for an + operator to set scsiIntrDscTgtConfigured = true before it is + authorized." + ::= { scsiIntrDevEntry 1 } + + scsiIntrDevOutResets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the number of resets sent by this + initiator." + ::= { scsiIntrDevEntry 2 } + + + + -- The following section describes managed objects related to + -- initiator ports. + scsiIntrPrtTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiIntrPrtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all the initiator ports of local SCSI + Initiator or Target/Initiator devices." + ::= { scsiInitiator 3 } + + scsiIntrPrtEntry OBJECT-TYPE + SYNTAX ScsiIntrPrtEntry + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) containing information applicable to a + particular initiator port of a particular device within a + SCSI instance. " + INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex } + ::= { scsiIntrPrtTable 1 } + + ScsiIntrPrtEntry ::= SEQUENCE { + scsiIntrPrtName ScsiName, + scsiIntrPrtIdentifier ScsiIdentifier, + scsiIntrPrtOutCommands Counter32, + scsiIntrPrtWrittenMegaBytes Counter32, + scsiIntrPrtReadMegaBytes Counter32, + scsiIntrPrtHSOutCommands Counter64 + } + + + scsiIntrPrtName OBJECT-TYPE + SYNTAX ScsiName + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the name of the port assigned for + use by the SCSI protocol. The format will depend of the type + of transport this port is using." + ::= { scsiIntrPrtEntry 1 } + + + scsiIntrPrtIdentifier OBJECT-TYPE + SYNTAX ScsiIdentifier + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the identifier of the port in one of + the format(s) appropriate for the type of transport in use." + ::= { scsiIntrPrtEntry 2 } + + scsiIntrPrtOutCommands OBJECT-TYPE + SYNTAX Counter32 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the number of commands sent by this + initiator." + ::= { scsiIntrPrtEntry 3 } + + scsiIntrPrtWrittenMegaBytes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Megabytes" + MAX-ACCESS read-only + + STATUS current + DESCRIPTION + "This object represents the amount of data in Megabytes sent + by this initiator." + ::= { scsiIntrPrtEntry 4 } + + + scsiIntrPrtReadMegaBytes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the amount of data in Megabytes + received by this initiator." + ::= { scsiIntrPrtEntry 5 } + + scsiIntrPrtHSOutCommands OBJECT-TYPE + SYNTAX Counter64 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the number of commands sent by this + initiator device. This object provides support for systems + which can quickly generate lots of commands because they run + at high speed." + ::= { scsiIntrPrtEntry 6 } + + scsiRemoteTarget OBJECT IDENTIFIER ::= { scsiInitiator 4 } + + -- Targets discovered or authorized to attach each of the initiator + -- ports of each initiator device of each instance. + scsiDscTgtTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiDscTgtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes all the remote (not in the local system) + target ports that are authorized to attach to each local + initiator port of this SCSI instance." + ::= { scsiRemoteTarget 1 } + + scsiDscTgtEntry OBJECT-TYPE + SYNTAX ScsiDscTgtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) represents an authorization for one or all + local initiator ports of a local device (scsiDeviceIndex) + within a local SCSI instance (scsiInstIndex), to attach to a + remote target port or device (scsiDscTgtIndex). The + + authorization is either for all local ports if + scsiDscTgtIntrPortIndex is zero, or otherwise only for the + specific port identified by scsiDscTgtIntrPortIndex. + Note that when an entry in this table is deleted, then any + corresponding entries in the scsiDscLunsTable should be + deleted as well." + INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex, + scsiDscTgtIndex } + ::= { scsiDscTgtTable 1 } + + ScsiDscTgtEntry ::= SEQUENCE { + scsiDscTgtIntrPortIndex ScsiPortIndexValueOrZero, + scsiDscTgtIndex ScsiIndexValue, + scsiDscTgtDevOrPort ScsiDeviceOrPort, + scsiDscTgtName ScsiName, + scsiDscTgtConfigured TruthValue, + scsiDscTgtDiscovered TruthValue, + scsiDscTgtInCommands Counter32, + scsiDscTgtWrittenMegaBytes Counter32, + scsiDscTgtReadMegaBytes Counter32, + scsiDscTgtHSInCommands Counter64, + scsiDscTgtLastCreation TimeStamp, + scsiDscTgtRowStatus RowStatus + } + + + scsiDscTgtIntrPortIndex OBJECT-TYPE + SYNTAX ScsiPortIndexValueOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object relates to a particular local device within a + particular SCSI instance and specifies: + - the index of the local scsi initiator port, + - or zero, if this entry refers to the local device and + therefore refers to all the local initiator ports." + ::= { scsiDscTgtEntry 1 } + + scsiDscTgtIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object is an arbitrary integer used to uniquely + identify a particular authorized target amongst those + authorized for one or more ports (of a particular device + within a particular SCSI instance) to attach to." + ::= { scsiDscTgtEntry 2 } + + scsiDscTgtDevOrPort OBJECT-TYPE + SYNTAX ScsiDeviceOrPort + MAX-ACCESS read-create + STATUS current + + DESCRIPTION + "This object specifies whether the authorization represented + by this row applies to a remote target port or remote target + device." + ::= { scsiDscTgtEntry 3 } + + scsiDscTgtName OBJECT-TYPE + SYNTAX ScsiName + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " This object represents the name of this + authorized/discovered target device or port." + ::= { scsiDscTgtEntry 4 } + + scsiDscTgtConfigured OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object means: + -true(1): this entry has been configured by an administrator + -false(2): this entry has been added from other source. + An administrator can modify this value from false to true." + DEFVAL { true } + ::= { scsiDscTgtEntry 5 } + + scsiDscTgtDiscovered OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object means: + -true(1): this entry has been discovered by the SCSI instance. + -false(2): this entry has been added from other source. + This entry is read-only because an administrator cannot + change it. + Note that it is an implementation decision to determine how + long to retain a row with configured=false, as and when the + target is no longer visible/accessible to the local + initiator." + ::= { scsiDscTgtEntry 6 } + + + + scsiDscTgtInCommands OBJECT-TYPE + SYNTAX Counter32 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the number of commands received by + this target port or device." + + ::= { scsiDscTgtEntry 7 } + + scsiDscTgtWrittenMegaBytes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the amount of data in Megabytes + written by this target port or device." + ::= { scsiDscTgtEntry 8 } + + scsiDscTgtReadMegaBytes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the amount of data in Megabytes read + by this target port or device." + ::= { scsiDscTgtEntry 9 } + + scsiDscTgtHSInCommands OBJECT-TYPE + SYNTAX Counter64 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the number of commands received by + this target port or device. This object provides support for + systems which can quickly generate lots of commands because + they run at high speed." + ::= { scsiDscTgtEntry 10 } + + scsiDscTgtLastCreation OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the value of sysUpTime when this row + was created." + ::= { scsiDscTgtEntry 11 } + + + scsiDscTgtRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object allows to configure dynamically a new entry in + this table via SNMP or eventually delete it. + + An administrator is not allowed to delete an entry for which + the value of the object scsiIntrDscTgtDiscovered is equal to + true. + Note that when an entry in this table is deleted, then any + corresponding entries in the scsiDscLunsTable must also be + automatically deleted. " + ::= { scsiDscTgtEntry 12 } + + scsiDscLunTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiDscLunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes all the remote (not in the local system) + logical unit numbers (LUNS) discovered via each local + initiator port of each local device within a particular SCSI + instance." + ::= { scsiRemoteTarget 2 } + + scsiDscLunEntry OBJECT-TYPE + SYNTAX ScsiDscLunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) represents a discovered LUN at a particular + SCSI target device (scsiDscTgtIndex), where the LUN was + discovered by a particular local initiator device within a + particular SCSI instance, possibly via a particular local + initiator port. + Note that when an entry in the scsiDscTgtTable is deleted, + then any corresponding entries in this table is automatically + deleted." + INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex, + scsiDscTgtIndex, scsiDscLunIndex } + ::= { scsiDscLunTable 1 } + + ScsiDscLunEntry ::= SEQUENCE { + scsiDscLunIndex ScsiIndexValue, + scsiDscLunLun ScsiLUNOrZero + } + + + scsiDscLunIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object is an arbitrary integer used to uniquely + identify a particular LUN discovered by a particular scsi + initiator port or a particular SCSI initiator device within a + particular SCSI instance. Entries in the scsiDscLunIdTable + + are associated with a LUN by having the value of this object + in their INDEX." + ::= { scsiDscLunEntry 1 } + + scsiDscLunLun OBJECT-TYPE + SYNTAX ScsiLUNOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the Logical Unit Number (LUN) of the + discovered logical unit. + A value of zero has no meaning in this case." + ::= { scsiDscLunEntry 2 } + + + ----------------------- LU Identifiers discovered ------------------ + scsiDscLunIdTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiDscLunIdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes all the known LU Identifiers of the + remote (not in the local system) logical units discovered via + each local initiator port or device of this SCSI instance." + ::= { scsiRemoteTarget 3 } + + scsiDscLunIdEntry OBJECT-TYPE + SYNTAX ScsiDscLunIdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) represents the LU Identifier of a discovered + LUN at a particular SCSI target device (scsiDscTgtIndex), + where the LUN was discovered by a particular local initiator + device within a particular SCSI instance, possibly via a + particular local initiator port." + INDEX { scsiInstIndex, scsiDeviceIndex, scsiDscTgtIntrPortIndex, + scsiDscTgtIndex, scsiDscLunIndex, scsiDscLunIdIndex } + ::= { scsiDscLunIdTable 1 } + + ScsiDscLunIdEntry ::= SEQUENCE { + scsiDscLunIdIndex ScsiIndexValue, + scsiDscLunIdCodeSet ScsiIdCodeSet, + scsiDscLunIdAssociation ScsiIdAssociation, + scsiDscLunIdType ScsiIdType, + scsiDscLunIdValue ScsiIdValue + } + + + scsiDscLunIdIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + + DESCRIPTION + "This object is an arbitrary integer used to uniquely + identify a particular LUN Identifier discovered by each scsi + initiator device or particular SCSI initiator port within a + particular SCSI instance." + ::= { scsiDscLunIdEntry 1 } + + scsiDscLunIdCodeSet OBJECT-TYPE + SYNTAX ScsiIdCodeSet + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the code set in use with this + identifier. + The value is represented in the same format as is contained + in the identifier's Identification Descriptor within the + Logical Unit's Device Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2),Revision 20, + Chapter 8: section 8.4.4, page 210 Vital Product Data + Parameters [16]" + ::= { scsiDscLunIdEntry 2 } + + scsiDscLunIdAssociation OBJECT-TYPE + SYNTAX ScsiIdAssociation + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies what the identifier is associated with + (e.g, with the addressed physical/logical device or with a + particular port). The value is represented in the same + format as is contained in the identifier's Identification + Descriptor within the Logical Unit's Device Identification + Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, + Chapter 8: section 8.4.4, page 210 Vital Product Data + Parameters [16]" + ::= { scsiDscLunIdEntry 3 } + + scsiDscLunIdType OBJECT-TYPE + SYNTAX ScsiIdType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the type of the identifier. + The value is represented in the same format as is contained + in the identifier's Identification Descriptor within the + Logical Unit's Device Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, + Chapter 8: section 8.4.4, page 210 Vital Product Data + Parameters [16]" + + ::= { scsiDscLunIdEntry 4 } + + scsiDscLunIdValue OBJECT-TYPE + SYNTAX ScsiIdValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the actual value of this identifier. + The format is defined by the objects scsiDscLunIdCodeSet, + scsiDscLunIdAssociation, scsiDscLunIdType. + The value is represented in the same format as is contained + in the identifier's Identification Descriptor within the + Logical Unit's Device Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), + Chapter 8: section 8.4.4, page 210 Vital Product Data + Parameters [16]" + ::= { scsiDscLunIdEntry 5 } + + + scsiAttTgtPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiAttTgtPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes all the remote (not in the local system) + target ports that are currently attached to each local + initiator port of this SCSI instance." + ::= { scsiRemoteTarget 6 } + + scsiAttTgtPortEntry OBJECT-TYPE + SYNTAX ScsiAttTgtPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) represents a remote target port + (scsiAttTgtPortIndex) currently attached to a particular + initiator port (scsiPortIndex) of a particular SCSI initiator + device within a particular SCSI instance." + INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex, + scsiAttTgtPortIndex } + ::= { scsiAttTgtPortTable 1 } + + ScsiAttTgtPortEntry ::= SEQUENCE { + scsiAttTgtPortIndex ScsiIndexValue, + scsiAttTgtPortDscTgtIdx ScsiIndexValueOrZero, + scsiAttTgtPortName ScsiName, + scsiAttTgtPortIdentifier ScsiIdentifier + } + + scsiAttTgtPortIndex OBJECT-TYPE + + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary integer used to uniquely identify a particular + target currently attached to a particular SCSI initiator port + of a particular SCSI initiator device within a particular + SCSI instance." + ::= { scsiAttTgtPortEntry 1 } + + scsiAttTgtPortDscTgtIdx OBJECT-TYPE + SYNTAX ScsiIndexValueOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the scsiAttTgtPortIndex + index variable for the row in the scsiDscTgtTable + representing this currently attached target port. If the + currently attached target port is not represented in the + scsiDscTgtTable, then the value of this object is zero." + ::= { scsiAttTgtPortEntry 2 } + + scsiAttTgtPortName OBJECT-TYPE + SYNTAX ScsiName + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object contains the name of the attached target port." + ::= { scsiAttTgtPortEntry 3 } + + + scsiAttTgtPortIdentifier OBJECT-TYPE + SYNTAX ScsiIdentifier + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object contains the identifier of the attached target + port." + ::= { scsiAttTgtPortEntry 4 } + + + + -- Management Objects regarding target type of scsi devices + -- + scsiTgtDevTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiTgtDevEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains information about each local target + device." + ::= { scsiTarget 1 } + + + scsiTgtDevEntry OBJECT-TYPE + SYNTAX ScsiTgtDevEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) containing information applicable to a + particular local target device within a particular SCSI + instance. " + INDEX { scsiInstIndex, scsiDeviceIndex } + ::= { scsiTgtDevTable 1 } + + ScsiTgtDevEntry ::= SEQUENCE { + scsiTgtDevNumberOfLUs Gauge32, + scsiTgtDeviceStatus INTEGER, + scsiTgtDevNonAccessibleLUs Gauge32 + } + + scsiTgtDevNumberOfLUs OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is the number of Logical Units accessible via + this local target device." + ::= { scsiTgtDevEntry 1 } + + scsiTgtDeviceStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + available(2), + broken(3), + readying(4), + abnormal(5), + nonAddrFailure(6), + nonAddrFailReadying(7), + nonAddrFailAbnormal(8) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the status of this SCSI device, + summarizing the state of both the addressable devices (i.e., + the logical units) and the non-addressable devices within + this SCSI device: + - unknown(1): This value is used when the status cannot be + determined + - available(2): All addressable and non-addressable devices + within the SCSI device are fully operational (i.e., no + logical units have an abnormal status). + - broken(3): The SCSI device is not operational and cannot be + made operational without external intervention. + - readying(4): One or more logical units within the SCSI + device are being initialized and access to the SCSI device is + + temporarily limited (i.e., one or more of the logical unit + have a readying status). + - abnormal(5): One or more addressable devices within the + SCSI device are indicating a status other than available; + nevertheless, the SCSI device is operational (i.e., one or + more of the logical units have an abnormal status). + - nonAddrFailure(6): One or more non-addressable devices + within the SCSI device have failed; nevertheless, the SCSI + device is operational (i.e., no logical units have an + abnormal or readying status). + - nonAddrFailReadying(7): One or more non-addressable devices + within the SCSI device have failed; nevertheless,one or more + logical units within the SCSI device are being initialized + and access to the SCSI device is temporarily limited. + - nonAddrFailAbnormal(8): One or more non-addressable devices + within the SCSI device have failed and one or more + addressable devices within the SCSI device are indicating a + status other than available however the SCSI device is + operational. + " + REFERENCE + "SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998 + 6.3.1.8 REPORT STATES service action" + ::= { scsiTgtDevEntry 2} + + + scsiTgtDevNonAccessibleLUs OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is the number of Logical Units existing but not + currently accessible via this local target device." + ::= { scsiTgtDevEntry 3 } + + -- Target Port Table + scsiTgtPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiTgtPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes all the local target ports of all the + local target devices." + ::= { scsiTarget 2 } + + scsiTgtPortEntry OBJECT-TYPE + SYNTAX ScsiTgtPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) containing information applicable to a + particular local target port of a particular local target + device within a particular SCSI instance. " + + INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex} + ::= { scsiTgtPortTable 1 } + + ScsiTgtPortEntry ::= SEQUENCE { + scsiTgtPortName ScsiName, + scsiTgtPortIdentifier ScsiIdentifier, + scsiTgtPortInCommands Counter32, + scsiTgtPortWrittenMegaBytes Counter32, + scsiTgtPortReadMegaBytes Counter32, + scsiTgtPortHSInCommands Counter64 + } + + scsiTgtPortName OBJECT-TYPE + SYNTAX ScsiName + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the name of the port assigned for + use in the SCSI protocol." + ::= { scsiTgtPortEntry 1 } + + scsiTgtPortIdentifier OBJECT-TYPE + SYNTAX ScsiIdentifier + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the identifier of the port in one of + the format(s) appropriate for the type of transport." + ::= { scsiTgtPortEntry 2 } + + scsiTgtPortInCommands OBJECT-TYPE + SYNTAX Counter32 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the number of commands received by + this target port." + ::= { scsiTgtPortEntry 3 } + + + scsiTgtPortWrittenMegaBytes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the amount of data written in + Megabytes by this target port." + ::= { scsiTgtPortEntry 4 } + + scsiTgtPortReadMegaBytes OBJECT-TYPE + SYNTAX Counter32 + + UNITS "Megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the amount of data read in Megabytes + by this target port." + ::= { scsiTgtPortEntry 5 } + + scsiTgtPortHSInCommands OBJECT-TYPE + SYNTAX Counter64 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the number of commands received. + This object provides support for systems that can quickly + generate lots of commands because they run at high speed." + ::= { scsiTgtPortEntry 6 } + + + scsiRemoteInitiators OBJECT IDENTIFIER ::= { scsiTarget 3 } + + -- The scsiAuthorizedIntrTable contains the list of remote initiator + -- ports that are authorized to be attached specific target ports + -- and on which, an administrator would like to keep permanent + -- information and long term statistics even when not currently + -- attached. + + scsiAuthorizedIntrTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiAuthorizedIntrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes all the authorized initiator devices or + ports that may attach a target device or port of the local + SCSI instance. Statistics are kept for each such + authorization; thus, the authorizations should be configured + in the manner, which will cause the desired set of statistics + to be collected and that will determine the correct LUN map." + ::= { scsiRemoteInitiators 1 } + + scsiAuthorizedIntrEntry OBJECT-TYPE + SYNTAX ScsiAuthorizedIntrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) represents a remote initiator port or remote + initiator device that may attach to the local target port or + device within a particular SCSI instance." + INDEX { scsiInstIndex, scsiDeviceIndex, scsiAuthIntrTgtPortIndex, + scsiAuthIntrIndex } + ::= { scsiAuthorizedIntrTable 1 } + + + ScsiAuthorizedIntrEntry ::= SEQUENCE { + scsiAuthIntrTgtPortIndex ScsiPortIndexValueOrZero, + scsiAuthIntrIndex ScsiIndexValue, + scsiAuthIntrDevOrPort ScsiDeviceOrPort, + scsiAuthIntrName ScsiName, + scsiAuthIntrLunMapIndex ScsiIndexValueOrZero, + scsiAuthIntrAttachedTimes Counter32, + scsiAuthIntrOutCommands Counter32, + scsiAuthIntrReadMegaBytes Counter32, + scsiAuthIntrWrittenMegaBytes Counter32, + scsiAuthIntrHSOutCommands Counter64, + scsiAuthIntrLastCreation TimeStamp, + scsiAuthIntrRowStatus RowStatus + } + + + scsiAuthIntrTgtPortIndex OBJECT-TYPE + SYNTAX ScsiPortIndexValueOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object contains either the index of the port, or zero + to indicate any port, on the particular local target device." + ::= { scsiAuthorizedIntrEntry 1 } + + scsiAuthIntrIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object is an arbitrary integer used to uniquely + identify a SCSI initiator which is authorized to attach to a + particular local target device or port of a particular SCSI + instance." + ::= { scsiAuthorizedIntrEntry 2 } + + scsiAuthIntrDevOrPort OBJECT-TYPE + SYNTAX ScsiDeviceOrPort + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies if this entry refers to a remote + initiator port or a device. + A value of device(1) means that the authorized remote + initiator is a device and includes all its ports. + A value of port(2) means that the authorized remote initiator + is a port." + ::= { scsiAuthorizedIntrEntry 3 } + + scsiAuthIntrName OBJECT-TYPE + SYNTAX ScsiName + MAX-ACCESS read-create + STATUS current + + DESCRIPTION + "This object represents the name of the remote initiator + device or port authorized by this row." + ::= { scsiAuthorizedIntrEntry 4 } + + scsiAuthIntrLunMapIndex OBJECT-TYPE + SYNTAX ScsiIndexValueOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object identifies the set of entries in the + scsiLunMapTable for which scsiLunMapIndex has the same value + as the value of this object. The identified set of entries + constitute the LUN map to be used for accessing logical units + when the remote initiator port or device corresponding to + this entry is attached to any local target port or device + corresponding to this entry. + Note that this object has a value of zero if this entry + should use the default LUN map." + ::= { scsiAuthorizedIntrEntry 5 } + + + scsiAuthIntrAttachedTimes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Times" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the number of times that this remote + initiator has transitioned from unattached to attached to + this local target device or port." + ::= { scsiAuthorizedIntrEntry 6 } + + scsiAuthIntrOutCommands OBJECT-TYPE + SYNTAX Counter32 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the number of commands that the remote + initiator corresponding to this entry has sent to the local + target device or port corresponding to this entry." + ::= { scsiAuthorizedIntrEntry 7 } + + scsiAuthIntrReadMegaBytes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the amount of data in Megabytes that + the remote initiator corresponding to this entry has read + + from the local target device or port corresponding to this + entry." + ::= { scsiAuthorizedIntrEntry 8 } + + scsiAuthIntrWrittenMegaBytes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the amount of data in Megabytes that + the remote initiator corresponding to this entry has written + from the local target device or port corresponding to this + entry." + ::= { scsiAuthorizedIntrEntry 9} + + + scsiAuthIntrHSOutCommands OBJECT-TYPE + SYNTAX Counter64 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the number of commands sent by the + remote initiator corresponding to this entry to the local + target device or port corresponding to this entry. This + object provides support for systems which can quickly + generate lots of commands because they run at high speed." + ::= { scsiAuthorizedIntrEntry 10 } + + scsiAuthIntrLastCreation OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the value of sysUpTime when this row + was last created." + ::= { scsiAuthorizedIntrEntry 11 } + + scsiAuthIntrRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object allows an administrator to create or delete this + entry." + ::= { scsiAuthorizedIntrEntry 12 } + + scsiAttIntrPrtTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiAttIntrPrtEntry + MAX-ACCESS not-accessible + STATUS current + + DESCRIPTION + "This table includes all the remote initiator ports that are + currently attached to a local target port of all local + devices within all SCSI instances." + ::= { scsiRemoteInitiators 2 } + + scsiAttIntrPrtEntry OBJECT-TYPE + SYNTAX ScsiAttIntrPrtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) represents a remote initiator currently + attached to a particular local target port of a particular + target device of a particular SCSI instance." + INDEX { scsiInstIndex, scsiDeviceIndex, scsiPortIndex, + scsiAttIntrPrtIdx } + ::= { scsiAttIntrPrtTable 1 } + + ScsiAttIntrPrtEntry ::= SEQUENCE { + scsiAttIntrPrtIdx ScsiIndexValue, + scsiAttIntrPrtAuthIntrIdx ScsiIndexValueOrZero, + scsiAttIntrPrtName ScsiName, + scsiAttIntrPrtId ScsiIdentifier + } + + scsiAttIntrPrtIdx OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " This object represents an arbitrary integer used to + uniquely identify a particular attached remote initiator port + to a particular target port within a particular SCSI target + device within a particular SCSI instance." + ::= { scsiAttIntrPrtEntry 1 } + + scsiAttIntrPrtAuthIntrIdx OBJECT-TYPE + SYNTAX ScsiIndexValueOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is the corresponding index in the + scsiAuthorizedIntrTable for this current attached remote + initiator or zero if this remote attached initiator is not + configured in that table." + ::= { scsiAttIntrPrtEntry 2 } + + scsiAttIntrPrtName OBJECT-TYPE + SYNTAX ScsiName + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + " This object represents the name of the remote initiator + attached to this local target port." + ::= { scsiAttIntrPrtEntry 3 } + + scsiAttIntrPrtId OBJECT-TYPE + SYNTAX ScsiIdentifier + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the identifier of the remote + initiator attached to this local target port." + ::= { scsiAttIntrPrtEntry 4 } + + + ------------------- Managed Objects regarding logical units -------- + scsiLuTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiLuEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " This table contains all the logical units exposed by local + target devices." + ::= { scsiLogicalUnit 1 } + + scsiLuEntry OBJECT-TYPE + SYNTAX ScsiLuEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) contains information applicable to a + particular logical unit of a particular local target device + within a particular SCSI instance. " + INDEX { scsiInstIndex, scsiDeviceIndex, scsiLuIndex} + ::= { scsiLuTable 1 } + + ScsiLuEntry ::= SEQUENCE { + scsiLuIndex ScsiIndexValue, + scsiLuDefaultLun ScsiLUNOrZero, + scsiLuWwnName ScsiNameIdOrZero, + scsiLuVendorId SnmpAdminString, + scsiLuProductId SnmpAdminString, + scsiLuRevisionId SnmpAdminString, + scsiLuPeripheralType Unsigned32, + scsiLuStatus INTEGER, + scsiLuState BITS, + scsiLuInCommands Counter32, + scsiLuReadMegaBytes Counter32, + scsiLuWrittenMegaBytes Counter32, + scsiLuInResets Counter32, + scsiLuOutQueueFullStatus Counter32, + scsiLuHSInCommands Counter64 + } + + + scsiLuIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " This object represents an arbitrary integer used to + uniquely identify a particular logical unit within a + particular SCSI target device within a particular SCSI + instance." + ::= { scsiLuEntry 1 } + + scsiLuDefaultLun OBJECT-TYPE + SYNTAX ScsiLUNOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the default Logical Unit Number + (LUN) for this logical unit; it is the LUN that will appear + to an initiator that was not configured to see another LUN. + Note that this object will have a zero-length string if this + Logical Unit does not have a default LUN." + ::= { scsiLuEntry 2 } + + scsiLuWwnName OBJECT-TYPE + SYNTAX ScsiNameIdOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the World-Wide Name of this LU. + A value of zero has no meaning in this case." + ::= { scsiLuEntry 3 } + + scsiLuVendorId OBJECT-TYPE + SYNTAX SnmpAdminString(SIZE(0..79)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents a string identifying the vendor of + this LU according to the value in SCSI device page." + ::= { scsiLuEntry 4 } + + scsiLuProductId OBJECT-TYPE + SYNTAX SnmpAdminString(SIZE(0..79)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents a string identifying the product for + this LU according to the value in SCSI device page." + ::= { scsiLuEntry 5 } + + scsiLuRevisionId OBJECT-TYPE + SYNTAX SnmpAdminString(SIZE(0..79)) + MAX-ACCESS read-only + + STATUS current + DESCRIPTION + "This object represents a string defining the product + revision of this LU according to the value in SCSI device + page." + ::= { scsiLuEntry 6 } + + scsiLuPeripheralType OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is the value returned to SCSI query VPD page 83. + It can be: direct-access device, sequential-access device, + printer, communication device and so on. + The values that can be returned here are defined in SCSI + Primary Commands -2." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), T10 Project 1236- + D, Revision 20, 18 July 2001 [16]" + ::= { scsiLuEntry 7 } + + scsiLuStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + available(2), + notAvailable(3), + broken(4), + readying(5), + abnormal(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the status of this logical unit: + - unknown(1): The status of this logical unit cannot be + determined. + - available(2): The logical unit is fully operational (i.e., + accepts media access SCSI commands and has no state + information to report). + - notAvailable(3): The logical unit is capable of being + supported but not available (i.e., no logical unit is + currently present or the logical unit is present but not + configured for use). + - broken(4): The logical unit has failed and cannot respond + to SCSI commands. + - readying(5): The logical unit is being initialized and + access is temporarily limited. + - abnormal(6): The logical unit has state information + available that indicates it is operating with limits. The + scsiLuState indicates what those limits are. + " + REFERENCE + + " SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998 + 6.3.1.8 REPORT STATES service action" + ::= { scsiLuEntry 8 } + + scsiLuState OBJECT-TYPE + SYNTAX BITS { + dataLost(0), + dynamicReconfigurationInProgress(1), + exposed(2), + fractionallyExposed(3), + partiallyExposed(4), + protectedRebuild(5), + protectionDisabled(6), + rebuild(7), + recalculate(8), + spareInUse(9), + verifyInProgress(10) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the state of a logical unit and its + meaning is according the bit position: + 0 Data lost: Within the logical unit data has been lost. + 1 Dynamic reconfiguration in progress: The logical unit is + being reconfigured. In this state all data is still + protected. + 2 Exposed: Within the logical unit data is not protected. + In this state all data is still valid, however, loss of + data/data-availability is unavoidable in the event of a + failure. + 3 Fractionally exposed: Within the logical unit part of + the data is not protected. In this state all data is + still valid, however, a failure may cause a loss of data + or a loss of data availability. + 4 Partially exposed: Within the logical unit one or more + underlying storage devices have failed. In this state + all data is still protected. + 5 Protected rebuild: The logical unit is in the process of + a rebuild operation. In this state all data is + protected. + 6 Protection disabled: Within the logical unit the data + protection method has been disabled. + In this state all data is still valid, however, however, + loss of data/data-availability is unavoidable in the + event of a failure. + 7 Rebuild: The data protection method is in the process of + rebuilding data. In this state data is not protected. + 8 Recalculate: The logical unit is in the process of a + recalculate operation. + 9 Spare in use: Within the logical unit a storage device + in full or part being used to store data. In this state + all data is still protected. + + 10 Verify in progress: Within the logical unit data is + being verified." + REFERENCE + " SCSI Controller Commands-2 (SCC-2) standard NCITS.318-1998 + 6.3.1.8 REPORT STATES service action" + ::= { scsiLuEntry 9 } + + scsiLuInCommands OBJECT-TYPE + SYNTAX Counter32 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the number of commands received by + this logical unit." + ::= { scsiLuEntry 10 } + + scsiLuReadMegaBytes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the amount of data in Megabytes read + from this logical unit." + ::= { scsiLuEntry 11 } + + scsiLuWrittenMegaBytes OBJECT-TYPE + SYNTAX Counter32 + UNITS "Megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the amount of data in Megabytes + written by this logical unit." + ::= { scsiLuEntry 12 } + + scsiLuInResets OBJECT-TYPE + SYNTAX Counter32 + UNITS "resets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the number of resets received by + this logical unit." + ::= { scsiLuEntry 13 } + + + scsiLuOutQueueFullStatus OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + " This object represents the number of queue full statuses + received by this logical unit." + ::= { scsiLuEntry 14 } + + scsiLuHSInCommands OBJECT-TYPE + SYNTAX Counter64 + UNITS "commands" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the number of commands received by + this logical unit. This object provides support for systems + that can quickly generate lots of commands because they run + at high speed." + ::= { scsiLuEntry 15 } + + ----------------------- Logical Unit Identifier Table -------------- + + scsiLuIdTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiLuIdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of identifiers for all logical units exposed by + local targets device." + ::= { scsiLogicalUnit 2 } + + scsiLuIdEntry OBJECT-TYPE + SYNTAX ScsiLuIdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (row) containing information applicable to a + particular identifier for a particular logical unit of a + particular target device within a particular SCSI instance. " + INDEX {scsiInstIndex, scsiDeviceIndex, scsiLuIndex, scsiLuIdIndex} + ::= { scsiLuIdTable 1 } + + ScsiLuIdEntry ::= SEQUENCE { + scsiLuIdIndex ScsiIndexValue, + scsiLuIdCodeSet ScsiIdCodeSet, + scsiLuIdAssociation ScsiIdAssociation, + scsiLuIdType ScsiIdType, + scsiLuIdValue ScsiIdValue + } + + scsiLuIdIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " This object represents an arbitrary integer used to + uniquely identify a particular LU Identifier within a + + particular logical unit within a particular SCSI target + device within a particular SCSI instance." + ::= { scsiLuIdEntry 1 } + + scsiLuIdCodeSet OBJECT-TYPE + SYNTAX ScsiIdCodeSet + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the code set in use with this + identifier. + The value is represented in the same format as is contained + in the identifier's Identification Descriptor within the + Logical Unit's Device Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 ((SPC-2), Revision 20, + Chapter 8: section 8.4.4, page 210 Vital Product Data + Parameters [16]" + ::= { scsiLuIdEntry 2 } + + scsiLuIdAssociation OBJECT-TYPE + SYNTAX ScsiIdAssociation + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies what the identifier is associated with + (e.g, with the addressed physical/logical device or with a + particular port). The value is represented in the same + format as is contained in the identifier's Identification + Descriptor within the Logical Unit's Device Identification + Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, + Chapter 8: section 8.4.4, page 210 Vital Product Data + Parameters [16]" + ::= { scsiLuIdEntry 3 } + + scsiLuIdType OBJECT-TYPE + SYNTAX ScsiIdType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the type of the identifier. + The value is represented in the same format as is contained + in the identifier's Identification Descriptor within the + Logical Unit's Device Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), Revision 20, + Chapter 8: section 8.4.4, page 210 Vital Product Data + Parameters [16]" + ::= { scsiLuIdEntry 4 } + + scsiLuIdValue OBJECT-TYPE + + SYNTAX ScsiIdValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " This object represents the actual value of this identifier. + The format is defined by the objects scsiLuIdCodeSet, + scsiLuIdAssociation, scsiLuIdType. + The value is represented in the same format as is contained + in the identifier's Identification Descriptor within the + Logical Unit's Device Identification Page." + REFERENCE + " ANSI - SCSI Primary Commands - 2 (SPC-2), + Chapter 8: section 8.4.4, page 210 Vital Product Data + Parameters [16]" + ::= { scsiLuIdEntry 5 } + + + ----------------------- The LUN Map Table -------------------------- + + scsiLunMapTable OBJECT-TYPE + SYNTAX SEQUENCE OF ScsiLunMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table includes LUNs additional to the default one. A + logical unit may have a different Logical Unit Number for + different initiators. This table provides a mapping between a + logical unit and a logical unit number." + ::= { scsiLogicalUnit 3 } + + scsiLunMapEntry OBJECT-TYPE + SYNTAX ScsiLunMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing information about the mapping of a + particular Logical Unit to a particular LUN. The set of + entries which all have the same values of scsiInstIndex, + scsiDeviceIndex and scsiLunMapIndex constitute a LUN Map within + a particular SCSI instance." + INDEX { scsiInstIndex, scsiDeviceIndex, scsiLunMapIndex, + scsiLunMapLun} + ::= { scsiLunMapTable 1 } + + ScsiLunMapEntry ::= SEQUENCE { + scsiLunMapIndex ScsiIndexValue, + scsiLunMapLun ScsiLUNOrZero, + scsiLunMapLuIndex ScsiIndexValue, + scsiLunMapRowStatus RowStatus + } + + scsiLunMapIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " This object represents an arbitrary integer used to + uniquely identify a particular LunMap within a particular + SCSI target device within a particular SCSI instance." + ::= { scsiLunMapEntry 1 } + + scsiLunMapLun OBJECT-TYPE + SYNTAX ScsiLUNOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the Logical Unit Number, to which a + logical unit is mapped by this row. + A value of zero has no meaning in this case." + ::= { scsiLunMapEntry 2 } + + scsiLunMapLuIndex OBJECT-TYPE + SYNTAX ScsiIndexValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object identifies the logical unit for which the value + of scsiLuIndex is the same as the value of this object. The + identified logical unit is the one mapped to a LUN by this + row." + ::= { scsiLunMapEntry 3 } + + scsiLunMapRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object allows an administrator to create and delete + this entry." + ::= { scsiLunMapEntry 4 } + + + + -- Notifications + -- scsiNotifications OBJECT IDENTIFIER ::= { scsiModule 2 } + scsiNotificationsPrefix OBJECT IDENTIFIER + ::= { scsiNotifications 0 } + + scsiTgtDeviceStatusChanged NOTIFICATION-TYPE + OBJECTS { scsiTgtDeviceStatus } + STATUS current + DESCRIPTION + " A notification will be generated for each occurrence of the + abnormal status (e.g., if the SCSI target device's current + status is abnormal) providing that the SCSI instance's value + of scsiInstScsiNotificationsEnable is enabled. + + An SNMP agent implementing the SCSI MIB should not send more + than three SCSI identical notifications in any 10-second + period." + ::= { scsiNotificationsPrefix 1 } + + scsiLuStatusChanged NOTIFICATION-TYPE + OBJECTS { scsiLuStatus } + STATUS current + DESCRIPTION + " A notification will be generated each time that + scsiLuStatus will change providing that the SCSI instance's + value of scsiInstScsiNotificationsEnable is enabled. + An SNMP agent implementing the SCSI MIB should not send more + than three SCSI identical notifications in any 10-second + period." + ::= { scsiNotificationsPrefix 2 } + + + -- The next part defines the conformance groups in use for SCSI MIB. + scsiCompliances OBJECT IDENTIFIER ::= { scsiConformance 1 } + + scsiCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the requirements for compliance to this SCSI MIB. + If an implementation can be both a target and an initiator, + all groups are mandatory." + MODULE -- this module + MANDATORY-GROUPS { + scsiDeviceGroup + } + + OBJECT scsiInstAlias + MIN-ACCESS read-only + DESCRIPTION + "Write access is not mandatory." + + OBJECT scsiInstScsiNotificationsEnable + MIN-ACCESS read-only + DESCRIPTION + "Write access is not mandatory." + + OBJECT scsiDeviceAlias + MIN-ACCESS read-only + DESCRIPTION + "Write access is not mandatory." + + -- Conditionally mandatory groups to be included with + -- the mandatory groups when the implementation has + -- SCSI target device. + + GROUP scsiTargetGroup + DESCRIPTION + + "This group is mandatory for all SCSI implementations that + have SCSI target devices." + GROUP scsiLunMapGroup + DESCRIPTION + "This group is mandatory for system having the capabilities + of mapping local targets and logical units according remote + initiators." + + OBJECT scsiAuthIntrDevOrPort + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT scsiAuthIntrName + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT scsiAuthIntrLunMapIndex + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT scsiAuthIntrRowStatus + SYNTAX RowStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, and only one of the six + enumerated values for the RowStatus textual convention need + be supported, specifically: active(1)." + + + -- Conditionally mandatory groups to be included with + -- the mandatory groups when the implementation has + -- SCSI initiator device. + + GROUP scsiInitiatorGroup + DESCRIPTION + "This group is mandatory for all SCSI implementations that + have SCSI initiator devices." + + OBJECT scsiIntrDevTgtAccessMode + MIN-ACCESS read-only + DESCRIPTION "Write access is not mandatory." + + GROUP scsiDiscoveryGroup + DESCRIPTION + "This group is mandatory for system having the capabilities + of discovering remote targets via local initiators." + + OBJECT scsiLunMapLuIndex + MIN-ACCESS read-only + DESCRIPTION + + "Write access is not mandatory." + + OBJECT scsiLunMapRowStatus + SYNTAX RowStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, and only one of the six + enumerated values for the RowStatus textual convention need + be supported, specifically: active(1)." + + OBJECT scsiDscTgtDevOrPort + MIN-ACCESS read-only + DESCRIPTION + "Write access is not mandatory." + + OBJECT scsiDscTgtName + MIN-ACCESS read-only + DESCRIPTION "Write access is not mandatory." + + OBJECT scsiDscTgtConfigured + SYNTAX TruthValue + MIN-ACCESS read-only + DESCRIPTION + "The value of true(1) is not mandatory neither the write + access." + + OBJECT scsiDscTgtRowStatus + SYNTAX RowStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, and only one of the six + enumerated values for the RowStatus textual convention need + be supported, specifically: active(1)." + + -- Conditionally mandatory groups to be included with the mandatory + -- groups when the implementation can gather statistics. + GROUP scsiDeviceStatGroup + DESCRIPTION + "This group is mandatory for all SCSI implementations that + can gather statistics." + + -- Conditionally mandatory groups to be included with the mandatory + -- groups when the implementation can gather statistics at the SCSI + -- initiator side. + GROUP scsiInitiatorStatsGroup + DESCRIPTION + "This group is mandatory for all SCSI implementations that + can gather statistics at SCSI initiator side." + GROUP scsiDiscoveryStatsGroup + DESCRIPTION + "This group is mandatory for system having the capabilities + of gathering statistics regarding remote targets via local + initiators." + + + -- Conditionally mandatory groups to be included with the mandatory + -- groups when the implementation can gather statistics at the SCSI + -- target side. + GROUP scsiTargetStatsGroup + DESCRIPTION + "This group is mandatory for all SCSI implementations that + can gather statistics at SCSI target devices." + GROUP scsiLunMapStatsGroup + DESCRIPTION + "This group is mandatory for SCSI implementations able to map + local targets and logical units according remote initiators." + + -- Conditionally mandatory groups to be included with the mandatory + -- groups when the implementation is running at high speed and can + -- gather statistics at the SCSI initiator side. + GROUP scsiInitiatorHSStatsGroup + DESCRIPTION + "This group is mandatory for all SCSI implementations that + can gather statistics at SCSI initiator side and are running + at high speed." + GROUP scsiDiscoveryHSStatsGroup + DESCRIPTION + "This group is mandatory for system having the capabilities + of gathering statistics regarding remote targets via local + initiators and are running at high speed." + + -- Conditionally mandatory groups to be included with the mandatory + -- groups when the implementation is running at high speed and can + -- gather statistics at the SCSI target side. + GROUP scsiTargetHSStatsGroup + DESCRIPTION + "This group is mandatory for all SCSI implementations that + can gather statistics at SCSI target devices in high speed + system." + GROUP scsiLunMapHSStatsGroup + DESCRIPTION + "This group is mandatory for SCSI implementations able to map + local targets and logical units according remote initiators + in high speed system." + ::= { scsiCompliances 1 } + + scsiGroups OBJECT IDENTIFIER ::= { scsiConformance 2 } + + scsiDeviceGroup OBJECT-GROUP + OBJECTS { + scsiInstAlias, + scsiInstSoftwareIndex, + scsiInstVendorVersion, + scsiInstScsiNotificationsEnable, + scsiDeviceAlias, + scsiDeviceRole, + scsiDevicePortNumber, + + scsiPortRole, + scsiPortTrnsptPtr, + scsiTrnsptType, + scsiTrnsptPointer, + scsiTrnsptDevName + } + STATUS current + DESCRIPTION + "A collection of objects providing information about SCSI + instances, devices and ports." + ::= { scsiGroups 1 } + + + scsiInitiatorGroup OBJECT-GROUP + OBJECTS { + scsiIntrDevTgtAccessMode, + scsiIntrPrtName, + scsiIntrPrtIdentifier, + scsiAttTgtPortDscTgtIdx, + scsiAttTgtPortName, + scsiAttTgtPortIdentifier + } + STATUS current + DESCRIPTION + "This group is relevant for an initiator device and port." + ::= { scsiGroups 2 } + + scsiDiscoveryGroup OBJECT-GROUP + OBJECTS { + scsiDscTgtDevOrPort, + scsiDscTgtName, + scsiDscTgtConfigured, + scsiDscTgtDiscovered, + scsiDscTgtRowStatus, + scsiDscTgtLastCreation, + scsiDscLunLun, + scsiDscLunIdCodeSet, + scsiDscLunIdAssociation, + scsiDscLunIdType, + scsiDscLunIdValue + } + STATUS current + DESCRIPTION + "This group is relevant for the discovered targets by an + initiator port." + ::= { scsiGroups 3 } + + scsiTargetGroup OBJECT-GROUP + OBJECTS { + scsiTgtDevNumberOfLUs, + scsiTgtDeviceStatus, + scsiTgtDevNonAccessibleLUs, + scsiTgtPortName, + + scsiTgtPortIdentifier, + scsiAttIntrPrtAuthIntrIdx, + scsiAttIntrPrtName, + scsiAttIntrPrtId, + scsiLuDefaultLun, + scsiLuWwnName, + scsiLuVendorId, + scsiLuProductId, + scsiLuRevisionId, + scsiLuPeripheralType, + scsiLuStatus, + scsiLuState, + scsiLuIdCodeSet, + scsiLuIdAssociation, + scsiLuIdType, + scsiLuIdValue + } + STATUS current + DESCRIPTION + "This group is relevant for a target device and port." + ::= { scsiGroups 4 } + + + scsiLunMapGroup OBJECT-GROUP + OBJECTS { + scsiLunMapLuIndex, + scsiLunMapRowStatus, + scsiAuthIntrDevOrPort, + scsiAuthIntrName, + scsiAuthIntrLunMapIndex, + scsiAuthIntrLastCreation, + scsiAuthIntrRowStatus + } + STATUS current + DESCRIPTION + "This group is a collection of attributes regarding the + mapping between logical unit number, logical unit and target + device." + ::= { scsiGroups 5} + + scsiTargetStatsGroup OBJECT-GROUP + OBJECTS { + scsiTgtPortInCommands, + scsiTgtPortWrittenMegaBytes, + scsiTgtPortReadMegaBytes, + scsiLuInCommands, + scsiLuReadMegaBytes, + scsiLuWrittenMegaBytes, + scsiLuInResets, + scsiLuOutQueueFullStatus + } + STATUS current + DESCRIPTION + + "This group is a collection of statistics for all + implementations of the SCSI MIB that contain targets." + ::= { scsiGroups 6} + + scsiTargetHSStatsGroup OBJECT-GROUP + OBJECTS { + scsiTgtPortHSInCommands, + scsiLuHSInCommands + } + STATUS current + DESCRIPTION + "This group is a collection of high speed statistics for all + implementations of the SCSI MIB that contain targets." + ::= { scsiGroups 7} + + scsiLunMapStatsGroup OBJECT-GROUP + OBJECTS { + scsiAuthIntrAttachedTimes, + scsiAuthIntrOutCommands, + scsiAuthIntrReadMegaBytes, + scsiAuthIntrWrittenMegaBytes + } + STATUS current + DESCRIPTION + "This group is a collection of statistics regarding + initiators authorized to attach local logical unit and target + device." + ::= { scsiGroups 8} + + scsiLunMapHSStatsGroup OBJECT-GROUP + OBJECTS { + scsiAuthIntrHSOutCommands + } + STATUS current + DESCRIPTION + "This group is a collection of high speed statistics + regarding initiators authorized to attach local logical unit + and target device." + ::= { scsiGroups 9} + + scsiInitiatorStatsGroup OBJECT-GROUP + OBJECTS { + scsiIntrDevOutResets, + scsiIntrPrtOutCommands, + scsiIntrPrtWrittenMegaBytes, + scsiIntrPrtReadMegaBytes + } + STATUS current + DESCRIPTION + "This group is a collection of statistics for all + implementations of the SCSI MIB that contain initiators." + ::= { scsiGroups 10} + + + scsiInitiatorHSStatsGroup OBJECT-GROUP + OBJECTS { + scsiIntrPrtHSOutCommands + } + STATUS current + DESCRIPTION + "This group is a collection of high speed statistics for all + implementations of the SCSI MIB that contain initiators." + ::= { scsiGroups 11} + + scsiDiscoveryStatsGroup OBJECT-GROUP + OBJECTS { + scsiDscTgtInCommands, + scsiDscTgtReadMegaBytes, + scsiDscTgtWrittenMegaBytes + } + STATUS current + DESCRIPTION + "This group is a collection of statistics for all + implementations of the SCSI MIB that contain discovered + initiators." + ::= { scsiGroups 12} + + scsiDiscoveryHSStatsGroup OBJECT-GROUP + OBJECTS { + scsiDscTgtHSInCommands + } + STATUS current + DESCRIPTION + "This group is a collection of high speed statistics for all + implementations of the SCSI MIB that contain discovered + initiators." + ::= { scsiGroups 13} + + scsiDeviceStatGroup OBJECT-GROUP + OBJECTS { + scsiDeviceResets, + scsiPortBusyStatuses + } + STATUS current + DESCRIPTION + "A collection of statistics regarding about SCSI devices and + ports." + ::= { scsiGroups 14 } + + END + |