diff options
Diffstat (limited to 'MIBS/enterasys/CTRON-TRANSLATION-MIB')
| -rw-r--r-- | MIBS/enterasys/CTRON-TRANSLATION-MIB | 1757 |
1 files changed, 1757 insertions, 0 deletions
diff --git a/MIBS/enterasys/CTRON-TRANSLATION-MIB b/MIBS/enterasys/CTRON-TRANSLATION-MIB new file mode 100644 index 0000000..894e618 --- /dev/null +++ b/MIBS/enterasys/CTRON-TRANSLATION-MIB @@ -0,0 +1,1757 @@ +CTRON-TRANSLATION-MIB DEFINITIONS ::= BEGIN + + -- ctron-translation-mib.txt + -- Revision: 1.02.00 + -- Part Number: + -- Date: April 26, 1999 + + + -- Cabletron Systems, Inc. + -- 35 Industrial Way, P.O. Box 5005 + -- Rochester, NH 03867-0505 + -- (603) 332-9400 + -- support@ctron.com + + -- + -- This module will be extended, as required. + -- + + -- Cabletron Systems reserves the right to make changes in + -- specification and other information contained in this document + -- without prior notice. The reader should consult Cabletron Systems + -- to determine whether any such changes have been made. + -- + -- In no event shall Cabletron Systems be liable for any incidental, + -- indirect, special, or consequential damages whatsoever (including + -- but not limited to lost profits) arising out of or related to this + -- document or the information contained in it, even if Cabletron + -- Systems has been advised of, known, or should have known, the + -- possibility of such damages. + -- + -- Cabletron grants vendors, end-users, and other interested parties + -- a non-exclusive license to use this Specification in connection + -- with the management of Cabletron products. + -- Copyright August 94 Cabletron Systems + -- + + + IMPORTS + OBJECT-TYPE FROM RFC-1212 + DisplayString FROM RFC1213-MIB + MacAddress FROM BRIDGE-MIB + ctTranslation FROM CTRON-MIB-NAMES; + + -- DisplayString ::= OCTET STRING + -- This data type is used to model textual information taken from + -- the NVT ASCII character set. By convention, objects with this + -- syntax, unless explicitly stated, are declared as having: + -- + -- SIZE (0..255) + + -- MacAddress ::= OCTET STRING (SIZE (6)) a 6 octet + -- address in the + -- "canonical" order + + + + ctTransFddiAtm OBJECT IDENTIFIER ::= { ctTranslation 1 } + ctTransFddiEthernet OBJECT IDENTIFIER ::= { ctTranslation 2 } + ctTransEthernetFddi OBJECT IDENTIFIER ::= { ctTranslation 3 } + ctTransRifDb OBJECT IDENTIFIER ::= { ctTranslation 4 } + ctTransBcastX OBJECT IDENTIFIER ::= { ctTranslation 5 } + ctTransIbmLlc OBJECT IDENTIFIER ::= { ctTranslation 6 } + ctTransSr OBJECT IDENTIFIER ::= { ctTranslation 7 } + ctTransNovellCfg OBJECT IDENTIFIER ::= { ctTranslation 8 } + ctTransIPCfg OBJECT IDENTIFIER ::= { ctTranslation 9 } + ctTransA2Cfg OBJECT IDENTIFIER ::= { ctTranslation 10 } + ctTransOtherCfg OBJECT IDENTIFIER ::= { ctTranslation 11 } + ctTranslfpsCfg OBJECT IDENTIFIER ::= { ctTranslation 12 } + + + -- ============================================================================ + -- FDDI/ATM Group + -- + -- controls IP fragmentation between FDDI and ATM. + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, the + -- entire group must be implemented + -- ============================================================================ + + ctTransFddiAtmMtu OBJECT-TYPE + SYNTAX INTEGER { + greater1518MTU(1), -- MTU greater than 1518 (1) (default) + less1518MTU(2) -- MTU less than 1518 (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When written with a (1), allows SNAP frames up to 4500 bytes in + length to be received from the FNB and processed by the ATM SAR + component. When this object is written with a (1), a value + of (1) for the ctTransFddiAtmIPFrag object must be ignored. + + When written with a (2), discards any frames received on the FNB + which are greater than 1518 bytes in length. A + value of (2) must be ignored if the frame is IP and the + ctTransFddiAtmIPFrag object is written with a (1)." + DEFVAL { greater1518MTU } + ::= { ctTransFddiAtm 1 } + + ctTransFddiAtmIPFrag OBJECT-TYPE + SYNTAX INTEGER { + enable(1), -- Enable IP Fragmentation + disable(2) -- Disable IP Fragmentation + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When written with a (1), will fragment IP frames from FDDI to + Ethernet before the frame is processed by the ATM SAR + component. This object must be ignored when written with a (1) if the + ctTransFddiAtmMtu object is written with a (1). + + When written with a (2), discards any frames received on the FNB + which are greater than 1518 bytes in length. A value of + (2) for this object must be ignored if the ctTransFddiAtmMtu + object is written with a (1)." + DEFVAL { disable } + ::= { ctTransFddiAtm 2 } + + -- ============================================================================ + -- FDDI/Ethernet Group + -- + -- controls frame Translation between FDDI and Ethernet. + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, the + -- entire group must be implemented + -- ============================================================================ + + ctTransFddiEthernetIPFrag OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enables or disables IP fragmentation from FDDI to any/all + Ethernet interfaces." + ::= { ctTransFddiEthernet 1 } + + ctTransFddiSnapEthernetType OBJECT-TYPE + SYNTAX INTEGER { + ethernetII(1), + ethernetSnap(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The desired frame type to be translated from FDDI to Ethernet. + If set to ethernetII(1) all non-IPX frames will be translated + to ethernetII. If set to ethernetSnap(2), all non-IPX frames will + be translated to ethernet_snap." + DEFVAL { ethernetII } + ::= { ctTransFddiEthernet 2 } + + ctTransFddiEthernetAuto OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + notSupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enables or disables the 'Auto-Learn' Translation feature of + FDDI to Ethernet frames for the objects below. If enabled, + the device will automatically learn the frame type by source + address from the Ethernet interfaces. If enabled, IPX FDDI frames + destined to a learned source address will be translated to the + appropriate frame type. If the Ethernet destination address has + not been heard from, therefore the frame type used is unknown, + the device default frame translation for that frame type will be used." + ::= { ctTransFddiEthernet 3 } + + ctTransFddiEthernetSnapIPX OBJECT-TYPE + SYNTAX INTEGER { + ethernetII(1), + ethernetSnap(2), + ethernet802dot3(3), + ethernet802dot3Raw(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The desired translation of IPX FDDI SNAP frames to Ethernet." + ::= { ctTransFddiEthernet 4 } + + ctTransFddiEthernet802dot2IPX OBJECT-TYPE + SYNTAX INTEGER { + ethernetII(1), + ethernetSnap(2), + ethernet802dot3(3), + ethernet802dot3Raw(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The desired translation of IPX FDDI 802.2 frames to Ethernet." + ::= { ctTransFddiEthernet 5 } + + ctTransFddiEthernetMACIPX OBJECT-TYPE + SYNTAX INTEGER { + ethernetII(1), + ethernetSnap(2), + ethernet802dot3(3), + ethernet802dot3Raw(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The desired translation of IPX FDDI MAC frames to Ethernet." + ::= { ctTransFddiEthernet 6 } + + -- ============================================================================ + -- Ethernet/FDDI Group + -- + -- controls frame Translation between Ethernet and FDDI. + -- Implementation of this group is optional. + -- + -- However, if any one element of the group is implemented, the + -- entire group must be implemented + -- ============================================================================ + + ctTransEthernetFddiRAW OBJECT-TYPE + SYNTAX INTEGER { + fDDI802dot2(1), + fDDISnap(2), + fDDIMAC(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The desired translation of Ethernet802.3 'RAW' frames to FDDI. + This is a device level object meaning Ethernet 'RAW' frames + to any/all FDDI interfaces." + ::= { ctTransEthernetFddi 1 } + + ctTransEthernetFddiPadVerify OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + not-supported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Selects 802.3 length verfication for Ethernet FDDI frame + translation. + + If set to Enabled(1), the device consults the 802.3 length + field to determine the amount of pad to removed regardless + of frame size. This setting will cause the device to strip + unnecessary pad in frames greater than 64 bytes. + + If set to Disabled(2), the default value, the 802.3 + length field is only interpreted if the frame size is + 64 bytes. For frames greater than 64 bytes, it is assumed + that there is no 802.3 pad in the frame. + + If set to Not-Supported(3), the device does not support this + feature and will only strip pad from ethernet frames that are + 64 bytes in length." + ::= { ctTransEthernetFddi 2 } + + -- ============================================================================ + -- RIF database group. + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, the entire + -- group must be implemented + -- + -- ============================================================================ + + ctTransRifDbTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransRifDbEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table containing entries of RIF Database." + ::= { ctTransRifDb 1 } + + ctTransRifDbEntry OBJECT-TYPE + SYNTAX CtTransRifDbEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This entry for ctTransRifDbTable." + INDEX { ctTransRifDbMacAddr } + ::= { ctTransRifDbTable 1 } + + CtTransRifDbEntry ::= + SEQUENCE { + ctTransRifDbMacAddr + MacAddress, + ctTransRifDbSrcPort + INTEGER, + ctTransRifDbLength + INTEGER, + ctTransRifDbRIF + DisplayString + } + + ctTransRifDbMacAddr OBJECT-TYPE + SYNTAX MacAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Mac address of a source station in Cabletron cannonical + format." + ::= { ctTransRifDbEntry 1 } + + ctTransRifDbSrcPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The index of the MIB-II interface that hardware address is learned + from." + ::= { ctTransRifDbEntry 2 } + + ctTransRifDbLength OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object returns the number of bytes of routing information + associated with this entry." + ::= { ctTransRifDbEntry 3 } + + ctTransRifDbRIF OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..16)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This returns the routing information associated with an entry." + ::= { ctTransRifDbEntry 4 } + + ctTransRifDbCtrlTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransRifDbCtrlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table containing entries of objects to control RIF database." + ::= { ctTransRifDb 2 } + + ctTransRifDbCtrlEntry OBJECT-TYPE + SYNTAX CtTransRifDbCtrlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This entry for ctTransRifDbCtrlTable." + INDEX { ctTransRifDbCtrlPort } + ::= { ctTransRifDbCtrlTable 1 } + + CtTransRifDbCtrlEntry ::= + SEQUENCE { + ctTransRifDbCtrlPort + INTEGER, + ctTransRifDbWeightState + INTEGER, + ctTransRifDbCtrlType + INTEGER, + ctTransRifDbAgingTimer + INTEGER + } + + ctTransRifDbCtrlPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MIB-II interface number of the port for which this entry + is administering control over the RIF cache." + ::= { ctTransRifDbCtrlEntry 1 } + + ctTransRifDbWeightState OBJECT-TYPE + SYNTAX INTEGER { + notsupported(1), + shortestpath(2), + quickestpath(3), + largestmtu(4), + lastseen(5) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates the type of RIF to be retained in the RIF database. + shortestPath (2) is the RIF with the least number of hops. The + existing RIF will be replaced if the new RIF + is shorter. + quickestPath (3) is the 'first seen' RIF. + largestMTU (4) is the path that supports the largest frame as + indicated by the LF (largest frame bits) in the + routing control field (RCF). + lastSeen (5) is the 'most recently seen' RIF. + + The default value for this object is device specific." + ::= { ctTransRifDbCtrlEntry 2 } + + ctTransRifDbCtrlType OBJECT-TYPE + SYNTAX INTEGER { + explorer(1), + all(2), + notsupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Type of RIF to cache. When the explorer option (1) is selected + the existing RIF may be replaced only if the received frame is + an explorer. When the 'all' option (2) is selected the existing + RIF may be replaced for any SR frame received with a valid RIF. + + Some devices will use this in conjunction with the + ctTransRifDbWeightState option to determine which RIFs may be + cached. + + The default for this object is product specific." + ::= { ctTransRifDbCtrlEntry 3 } + + +ctTransRifDbAgingTimer OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The timeout period in seconds for aging out dynamically + learned RI Fs. + + The default for this object is product specific." + ::= { ctTransRifDbCtrlEntry 4 } + + + -- ============================================================================ + -- Broadcast Conversion group. + -- + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, the + -- entire group must be implemented + -- ============================================================================ + + ctTransBcastXTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransBcastXEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list describing the state of the broadcast conversion for each + interface on this device. The user will specify two broadcast + addresses (per interface), one for the media specific interface + one for the cannonical format, that the translation state machine + will provide conversion between. This conversion only acts upon the + DA of the MAC header when the specified address matches the DA." + ::= { ctTransBcastX 1 } + + ctTransBcastXEntry OBJECT-TYPE + SYNTAX CtTransBcastXEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of objects pertaining to the state of broadcast + conversion for each interface." + INDEX { ctTransBcastXPort } + ::= { ctTransBcastXTable 1 } + + CtTransBcastXEntry ::= + SEQUENCE { + ctTransBcastXPort + INTEGER, + ctTransBcastXMode + INTEGER, + ctTransBcastXMedia + MacAddress, + ctTransBcastXCanonical + MacAddress + } + + ctTransBcastXPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MIB-II interface number of the port for which this entry + is administering broadcast conversion translation." + ::= { ctTransBcastXEntry 1} + + ctTransBcastXMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates whether the ctTransBcastXMedia and + ctTransBcastXCanonical objects pair are valid for this + interface." + ::= { ctTransBcastXEntry 2} + + ctTransBcastXMedia OBJECT-TYPE + SYNTAX MacAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object is the media specific broadcast address that this + interface will allow translation to/from. This conversion only + acts upon the DA of the MAC header when the specified address + matches the DA." + ::= { ctTransBcastXEntry 3} + + ctTransBcastXCanonical OBJECT-TYPE + SYNTAX MacAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object is the cannonical broadcast address that this + interface will allow translation to/from. This conversion only + acts upon the DA of the MAC header when the specified address + matches the DA." + ::= { ctTransBcastXEntry 4} + + -- =========================================================================== + -- IBM LLC configuration group. + -- + -- Normally this group will only be implemented on devices with the + -- ability to 'remember' the type of network the packet originated + -- on. + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, the + -- entire group must be implemented + -- =========================================================================== + + ctTransIbmLlcTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransIbmLlcEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list describing the state of the + IBM LLC translation for each interface on this device." + ::= { ctTransIbmLlc 1 } + + ctTransIbmLlcEntry OBJECT-TYPE + SYNTAX CtTransIbmLlcEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of objects pertaining to the state of IBM LLC + translation for each interface." + INDEX { ctTransIbmLlcPort } + ::= { ctTransIbmLlcTable 1 } + + CtTransIbmLlcEntry ::= + SEQUENCE { + ctTransIbmLlcPort + INTEGER, + ctTransIbmLlcNullMode + INTEGER, + ctTransIbmLlcSnaPathMode + INTEGER, + ctTransIbmLlcSnaMode + INTEGER, + ctTransIbmLlcNbMode + INTEGER, + ctTransIbmLlcLnmMode + INTEGER, + ctTransIbmLlcDscMode + INTEGER, + ctTransIbmLlcOtherMode + INTEGER, + ctTransIbmLlcOtherValue + INTEGER + } + + ctTransIbmLlcPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MIB-II interface number of the port for which this entry + is administering IBM LLC translation." + ::= { ctTransIbmLlcEntry 1} + + ctTransIbmLlcNullMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + notsupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "IBM networks systems have a special translation called 'IBM + LLC Encapsulation' which is used for translating IBM LLC + based protocols between Token Ring and Ethernet Version 2.0 (DIXE) + format. This translation does not apply when going between Token + Ring and 802.3, since LLC SAPs are maintained. This translation + allows connectivity between Token stations separated by an + Ethernet segment in an internetwork environment. An Ethernet + protocol type of 80 D5 is used to indicate IBM LLC protocol + encapsulation. + + When enabled(1) all frames outbound on this token ring port and + with an LSAP value of 00 (Null) and where the packet originated + on an ethernet network will have the IBM LLC protocol field of + five bytes stripped from the packet. + + When disabled(2) the IBM LLC protocol field is untouched on these + packets. + + The default value for this object is product specific. A write of + notsupported (1) will have no affect." + ::= { ctTransIbmLlcEntry 2} + + ctTransIbmLlcSnaPathMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + notsupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "IBM networks systems have a special translation called 'IBM + LLC Encapsulation' which is used for translating IBM LLC based + protocols between Token Ring and Ethernet Version 2.0 (DIXE) + format. This translation does not apply when going between Token + Ring and 802.3, since LLC SAPs are maintained. This translation + allows connectivity between Token stations separated by an + Ethernet segment in an internetwork environment. An Ethernet + protocol type of 80 D5 is used to indicate IBM LLC protocol + encapsulation. + + + When enabled(1) all frames outbound on this token ring port and + with an LSAP value of 04 (SNA path control) and where the packet + originated on an ethernet network will have the IBM LLC protocol + field of five bytes stripped from the packet. + + When disabled(2) the IBM LLC protocol field is untouched on these + packets. + + The default value for this object is product specific. A write of + notsupported (1) will have no affect." + ::= { ctTransIbmLlcEntry 3} + + ctTransIbmLlcSnaMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + notsupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "IBM networks systems have a special translation called 'IBM + LLC Encapsulation' which is used for translating IBM LLC based + protocols between Token Ring and Ethernet Version 2.0 (DIXE) + format. This translation does not apply when going between Token + Ring and 802.3, since LLC SAPs are maintained. This translation + allows connectivity between Token stations separated by an + Ethernet segment in an internetwork environment. An Ethernet + protocol type of 80 D5 is used to indicate IBM LLC protocol + encapsulation. + + When enabled(1) all frames outbound on this token ring port and + with an LSAP value of 08 (SNA) and where the packet originated + on an ethernet network will have the IBM LLC protocol field of + five bytes stripped from the packet. + + When disabled(2) the IBM LLC protocol field is untouched on these + packets. + + The default value for this object is product specific. A write of + notsupported (1) will have no affect." + ::= { ctTransIbmLlcEntry 4} + + ctTransIbmLlcNbMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + notsupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "IBM networks systems have a special translation called 'IBM + LLC Encapsulation' which is used for translating IBM LLC based + protocols between Token Ring and Ethernet Version 2.0 (DIXE) + format. This translation does not apply when going between Token + Ring and 802.3, since LLC SAPs are maintained. This translation + allows connectivity between Token stations separated by an + Ethernet segment in an internetwork environment. An Ethernet + protocol type of 80 D5 is used to indicate IBM LLC protocol + encapsulation. + + + When enabled(1) all frames outbound on this token ring port and + with an LSAP value of F0 (NetBIOS) and where the packet originated + on an ethernet network will have the IBM LLC protocol field of + five bytes stripped from the packet. + + When disabled(2) the IBM LLC protocol field is untouched on these + packets. + + The default value for this object is product specific. A write of + notsupported (1) will have no affect." + ::= { ctTransIbmLlcEntry 5} + + ctTransIbmLlcLnmMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + notsupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "IBM networks systems have a special translation called 'IBM + LLC Encapsulation' which is used for translating IBM LLC based + protocols between Token Ring and Ethernet Version 2.0 (DIXE) + format. This translation does not apply when going between Token + Ring and 802.3, since LLC SAPs are maintained. This translation + allows connectivity between Token stations separated by an + Ethernet segment in an internetwork environment. An Ethernet + protocol type of 80 D5 is used to indicate IBM LLC protocol + encapsulation. + + + When enabled(1) all frames outbound on this token ring port and + with an LSAP value of F4 (LAN Network Manager) and where the packet + originated on an ethernet network will have the IBM LLC protocol + field of five bytes stripped from the packet. + + When disabled(2) the IBM LLC protocol field is untouched on these + packets. + + The default value for this object is product specific. A write of + notsupported (1) will have no affect." + ::= { ctTransIbmLlcEntry 6} + + ctTransIbmLlcDscMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + notsupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "IBM networks systems have a special translation called 'IBM + LLC Encapsulation' which is used for translating IBM LLC based + protocols between Token Ring and Ethernet Version 2.0 (DIXE) + format. This translation does not apply when going between Token + Ring and 802.3, since LLC SAPs are maintained. This translation + allows connectivity between Token stations separated by an + Ethernet segment in an internetwork environment. An Ethernet + protocol type of 80 D5 is used to indicate IBM LLC protocol + encapsulation. + + When enabled(1) all frames outbound on this token ring port and + with an LSAP value of FC (Discovery) will and where the packet + originated on an ethernet network will have the IBM LLC protocol + field of five bytes stripped from the packet. + + When disabled(2) the IBM LLC protocol field is untouched on these + packets. + + The default value for this object is product specific. A write of + notsupported (1) will have no affect." + ::= { ctTransIbmLlcEntry 7} + + ctTransIbmLlcOtherMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + notsupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "IBM networks systems have a special translation called 'IBM + LLC Encapsulation' which is used for translating IBM LLC based + protocols between Token Ring and Ethernet Version 2.0 (DIXE) + format. This translation does not apply when going between Token + Ring and 802.3, since LLC SAPs are maintained. This translation + allows connectivity between Token stations separated by an + Ethernet segment in an internetwork environment. An Ethernet + protocol type of 80 D5 is used to indicate IBM LLC protocol + encapsulation. + + When enabled(1) all frames meeting the following criteria: + - outbound on this token ring port + - with an LSAP value matching that found in + ctTransIbmLlcOtherValue + - where the packet originated on an ethernet network + will have the IBM LLC protocol field of five bytes stripped from + the packet. + + When disabled(2) the IBM LLC protocol field is untouched on these + packets. + + The default value for this object is product specific. A write of + notsupported (1) will have no affect." + ::= { ctTransIbmLlcEntry 8} + + ctTransIbmLlcOtherValue OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object allows the user to select an IBM LLC LSAP value not + specified above. + + When ctTransIbmLlcOtherMode is enabled all frames outbound on this + token ring port and providing a match between this value and the + outbound packet's LSAP value and where the packet originated on an + ethernet network will have the IBM LLC protocol field of five bytes + stripped from the packet." + ::= { ctTransIbmLlcEntry 9} + + -- ============================================================================ + -- Source Route group. + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, + -- the entire group must be implemented + -- + -- ============================================================================ + + ctTransSrTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransSrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table of entries describing the source route + configuration managed objects." + ::= { ctTransSr 1 } + + ctTransSrEntry OBJECT-TYPE + SYNTAX CtTransSrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of objects to allow the configuration of source + route translation information." + INDEX { ctTransSrPort } + ::= { ctTransSrTable 1 } + + CtTransSrEntry ::= + SEQUENCE { + ctTransSrPort + INTEGER, + ctTransSrIfMode + INTEGER, + ctTransSrExpMode + INTEGER, + ctTransSrIP + INTEGER, + ctTransSrIPX + INTEGER, + ctTransSrNetBIOS + INTEGER, + ctTransSrSNA + INTEGER, + ctTransSrOther + INTEGER, + ctTransSRLocalSegment + INTEGER, + ctTransSrSRLF + INTEGER, + ctTransSRAutoRingNumberDetect + INTEGER + } + + ctTransSrPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MIB-II interface number for which this entry + is administering source route configuration management." + ::= { ctTransSrEntry 1 } + + ctTransSrIfMode OBJECT-TYPE + SYNTAX INTEGER { + tp(1), + sr(2), + srt(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates the types of frames (sr,tp or both) + supported by endstations attached to this interface. + This information is used by the device to determine + if sr/tp translation is required. Default is product specific. + + If tp (1) is selected the RIF cacheing mechanism for this port + will be disabled. That is, the RIF cache database will be + emptied and no RIFs will be learned into the database or attached + to outbound packets for this port. + + If sr (2) or srt (3) is selected for this object then the RIFs + will be learned into the database according to the rules defined + in the object ctTransRifDbWeightState and attached as necessary + to outbound packets." + ::= { ctTransSrEntry 2 } + + ctTransSrExpMode OBJECT-TYPE + SYNTAX INTEGER { + notsupported(1), + are(2), + ste(3), + inboundtype(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object selects the type of explorer frame the SR or SRT + interface will use, if and when an explorer frame is required. + This object is only applicable when ctTransSrIfMode is set to + sr (2) or srt (3). The requirements will depend on the device + being managed. + + The inboundtype option (4) is supported only on those devices with + the ability to 'remember' the original state of the arriving + explorer packet. When set for this option the device will configure + all outbound explorer frames for whichever type of explorer + (ARE or STE) it arrived as. + + The default value for this object is product specific. A write of + notsupported (1) will have no affect." + ::= { ctTransSrEntry 3 } + + ctTransSrIP OBJECT-TYPE + SYNTAX INTEGER { + tp(1), + sr(2), + auto(3), + notsupported(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object determines how the sr/tp translation of IP frames + of type 'broadcast', 'destination unknown', or 'destination + known but IP not previously seen for this end station' should + be translated. This object is only applicable for SRT interfaces. + + If tp (1) is selected, the frame is forwarded out the + SRT interface as a transparent frame. + + If sr (2) is selected, the frame is forwarded out + the srt interface as a source route frame. If this end station + has never been heard from before an explorer will be launched. + Which explorer frame (are or ste) is dependent on the object + ctTransSrExplorerMode defined above. + + If auto (3) is selected, the frame is forwarded out the srt + interface as both a transparent frame and as a source route frame. + + If not supported (4) is selected then the sr/tp translation of these + types of IP frames will be based on the configuration of the ctTransSrOther + managed object. + + The default value is product specific." + ::= { ctTransSrEntry 4 } + + ctTransSrIPX OBJECT-TYPE + SYNTAX INTEGER { + tp(1), + sr(2), + auto(3), + notsupported(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object determines how the sr/tp translation of IPX frames + of type `broadcast`, `destination unknown`, or `destination + known but IPX not previously seen for this end station` should + be translated. This object is only applicable for SRT interfaces. + + If tp (1) is selected, the frame is forwarded out the + SRT interface as a transparent frame. + + If sr (2) is selected, the frame is forwarded out + the SRT interface as a source route frame. If this end station + has never been heard from before an explorer will be launched. + Which explorer frame (are or ste) is dependent on the object + ctTransSrExplorerMode defined above. + + If auto (3) is selected, the frame is forwarded out the SRT + interface as both a transparent frame and as a source route frame. + + If not supported (4) is selected then the sr/tp translation of these + types of IPX frames will be based on the configuration of the ctTransSrOther + managed object. + + The default value is product specific." + ::= { ctTransSrEntry 5 } + + ctTransSrNetBIOS OBJECT-TYPE + SYNTAX INTEGER { + tp(1), + sr(2), + auto(3), + notsupported(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object determines how the sr/tp translation of NetBIOS frames + of type `broadcast`, `destination unknown`, or `destination + known but NetBIOS not previously seen for this end station` should + be translated. This object is only applicable for SRT interfaces. + + If tp (1) is selected, the frame is forwarded out the + SRT interface as a transparent frame. + + If sr (2) is selected, the frame is forwarded out + the SRT interface as a source route frame. If this end station + has never been heard from before an explorer will be launched. + Which explorer frame (ARE or STE) is dependent on the object + ctTransSrExplorerMode defined above. + + If auto (3) is selected, the frame is forwarded out the SRT + interface as both a transparent frame and as a source route frame. + + If not supported (4) is selected then the sr/tp translation of these + types of NetBIOS frames will be based on the configuration of the ctTransSrOther + managed object. + + The default value is product specific." + ::= { ctTransSrEntry 6 } + + ctTransSrSNA OBJECT-TYPE + SYNTAX INTEGER { + tp(1), + sr(2), + auto(3), + notsupported(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object determines how the sr/tp translation of SNA frames + of type 'broadcast', 'destination unknown', or 'destination + known but SNA not previously seen for this end station' should + be translated. This object is only applicable for SRT interfaces. + + If tp (1) is selected, the frame is forwarded out the + SRT interface as a transparent frame. + + If sr (2) is selected, the frame is forwarded out + the SRT interface as a source route frame. If this end station + has never been heard from before an explorer will be launched. + Which explorer frame (ARE or STE) is dependent on the object + ctTransSrExplorerMode defined above. + + If auto (3) is selected, the frame is forwarded out the SRT + interface as both a transparent frame and as a source route frame. + + If not supported (4) is selected then the sr/tp translation of these + types of SNA frames will be based on the configuration of the ctTransSrOther + managed object. + + The default value is product specific." + ::= { ctTransSrEntry 7 } + + ctTransSrOther OBJECT-TYPE + SYNTAX INTEGER { + tp(1), + sr(2), + auto(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object determines how the sr/tp translation of all 'other + protocols' is handled. 'other protocols' includes any protocol not + mentioned above (i.e. IP,IPX,NetBIOS, or SNA) or any of those + mentioned above with the 'not supported' option selected. + + This object applies to any 'other protocol' frame of type + 'broadcast', 'destination unknown', or 'destination known but + 'other protocol' not previously seen for this end station'. + This object is only applicable for SRT interfaces. + + If tp (1) is selected, the frame is forwarded out the + SRT interface as a transparent frame. + + If sr (2) is selected, the frame is forwarded out + the SRT interface as a source route frame. If this end station + has never been heard from before an explorer will be launched. + Which explorer frame (ARE or STE) is dependent on the object + ctTransSrExplorerMode defined above. + + If auto (3) is selected, the frame is forwarded out the SRT + interface as both a transparent frame and as a source route frame. + + The default value is product specific." + ::= { ctTransSrEntry 8 } + + ctTransSRLocalSegment OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The segment (ring) number that uniquely identifies the + segment to which this interface is connected. Current + source routing protocols limit this value to the + range: 0 through 4095. (The value 0 is used by + some management applications for special test + cases.) + + A value of 65535 signifies that no segment number is + assigned for this interface. The default value is device + dependent." + ::= { ctTransSrEntry 9 } + + ctTransSrSRLF OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The maximum size of the INFO field (LLC and + above) that this interface can send/receive. It does + not include any MAC level (framing) octets. The + value of this object is used by this device to + determine whether a modification of the + LargestFrame (LF) field of the Routing + Control field of the Routing Information Field is + necessary. + + 64 valid values are defined by the IEEE 802.5M SRT + Addendum: 516, 635, 754, 873, 993, 1112, 1231, + 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906, + 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812, + 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197, + 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587, + 10997, 11407, 12199, 12992, 13785, 14578, 15370, + 16163, 16956, 17749, 20730, 23711, 26693, 29674, + 32655, 35637, 38618, 41600, 44591, 47583, 50575, + 53567, 56559, 59551, and 65535." + ::= { ctTransSrEntry 10 } + + ctTransSRAutoRingNumberDetect OBJECT-TYPE + SYNTAX INTEGER { + notsupported(1), + enable(2), + disable(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object enables an interface to automatically detect + the source route ring number of the attached ring segment. + When enabled, the interface wil automatically each time at + open, configure its ring number with the supplied ring + number from the RPS, if present on the ring. Otherwise, + a default value is used when the interface opens." + ::= { ctTransSrEntry 11 } + + -- ============================================================================ + -- Novell Configuration group. + -- + -- Novell translation is typically used on devices with at least + -- one token ring interface. + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, the + -- entire group must be implemented + -- ============================================================================ + + ctTransNovellCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransNovellCfgEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list describing the enabled/disabled state of the + Novell translation for each interface on this device." + ::= { ctTransNovellCfg 1 } + + ctTransNovellCfgEntry OBJECT-TYPE + SYNTAX CtTransNovellCfgEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of objects pertaining to the state of Novell + translation for each interface." + INDEX { ctTransNovellCfgPort } + ::= { ctTransNovellCfgTable 1 } + + CtTransNovellCfgEntry ::= + SEQUENCE { + ctTransNovellCfgPort + INTEGER, + ctTransNovellCfgMode + INTEGER, + ctTransNovellGroupMode + INTEGER + } + + ctTransNovellCfgPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MIB-II interface number of the port for which this entry is + administering Novell configuration management." + ::= { ctTransNovellCfgEntry 1} + + ctTransNovellCfgMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + enabledType2(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Enable this object indicates whether the device will reverse the + bit ordering of addresses in the Novell header on Novell packets. + Enable Type 2 indicates the device will reverse the bit ordering + of addresses for token ring to fddi and no translation for token + ring to inb in the MAC layer. Disable will not bit reverse any + address. + + The default of this object is enabled." + ::= { ctTransNovellCfgEntry 2} + + ctTransNovellGroupMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + notsupported(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object allows the conversion of group and multicast + addresses in the MAC DA of the IPX protocol format. Conversion + is as follows: + TR(C0 00 00 80 00 00) and Canonical (FF FF FF FF FF FF). + TR(C0 00 40 00 00 00) and Canonical (09 00 07 FF FF FF). + This object is only applicable if the state of ctTransNovellCfgMode + is enabled. + + The default value for this object is product specific. A + write of notsupported (3) will have no affect." + ::= { ctTransNovellCfgEntry 3} + + -- ============================================================================ + -- IP configuration group. + -- + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, the + -- entire group must be implemented + -- ============================================================================ + + ctTransIPCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransIPCfgEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list describing the enabled/disabled state of the + IP translation for each interface on this device." + ::= { ctTransIPCfg 1 } + + ctTransIPCfgEntry OBJECT-TYPE + SYNTAX CtTransIPCfgEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of objects pertaining to the state of IP + translation for each interface." + INDEX { ctTransIPCfgPort } + ::= { ctTransIPCfgTable 1 } + + CtTransIPCfgEntry ::= + SEQUENCE { + ctTransIPCfgPort + INTEGER, + ctTransIPDataCfgMode + INTEGER, + ctTransIPArpCfgMode + INTEGER, + ctTransIPRarpCfgMode + INTEGER + } + + ctTransIPCfgPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MIB-II interface number of the port for which this entry + is administering IP configuration management." + ::= { ctTransIPCfgEntry 1} + + ctTransIPDataCfgMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates whether the device will reverse the bit + ordering of addresses in the information field of IP data packets + received and then transmitted on this interface. + + The default of this object is enabled." + ::= { ctTransIPCfgEntry 2} + + ctTransIPArpCfgMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates whether the device will reverse the bit + ordering of addresses in the information field of ARP packets + received and then transmitted on this interface. + + The default of this object is enabled." + ::= { ctTransIPCfgEntry 3} + + ctTransIPRarpCfgMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates whether the device will reverse the + bit ordering of addresses in the information field of RARP + packets received and then transmitted on this interface. + + The default of this object is enabled." + ::= { ctTransIPCfgEntry 4} + + -- ============================================================================ + -- Appletalk2 configuration group. + -- + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, the + -- entire group must be implemented + -- ============================================================================ + + ctTransA2CfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransA2CfgEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list describing the enabled/disabled state of the + Appletalk2 translation for each interface on this device." + ::= { ctTransA2Cfg 1 } + + ctTransA2CfgEntry OBJECT-TYPE + SYNTAX CtTransA2CfgEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of objects pertaining to the state of Appletalk2 + translation for each interface." + INDEX { ctTransA2CfgPort } + ::= { ctTransA2CfgTable 1 } + + CtTransA2CfgEntry ::= + SEQUENCE { + ctTransA2CfgPort + INTEGER, + ctTransA2DataCfgMode + INTEGER, + ctTransA2ArpCfgMode + INTEGER, + ctTransA2McastCfgMode + INTEGER + } + + ctTransA2CfgPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MIB-II interface number of the port for which this entry is + administering Appletalk2 configuration management." + ::= { ctTransA2CfgEntry 1} + + ctTransA2DataCfgMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates whether the device will reverse the + bit ordering of addresses in the information field of Appletalk2 + data packets received and then transmitted on this interface. + + The default of this object is enabled." + ::= { ctTransA2CfgEntry 2} + + ctTransA2ArpCfgMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates whether the device will reverse the + bit ordering of addresses in the information field of ARP + packets received and then transmitted on this interface. + + The default of this object is enabled." + ::= { ctTransA2CfgEntry 3} + + ctTransA2McastCfgMode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates whether the device will reverse the + bit ordering of addresses in the information field of + broadcast/multicast packets received and then transmitted on this + interface. + + The default of this object is enabled." + ::= { ctTransA2CfgEntry 4} + + -- ============================================================================ + -- Other Configuration group + -- + -- Implementation of this group is optional. + -- However, if any one element of the group is implemented, the + -- entire group must be implemented + -- ============================================================================ + + ctTransOtherTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransOtherEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list describing processing control for subgroups of LLC frames + by SAP or SNAP type. This table allows the user to single out + selected frame type groups for special handling by the processor + (purely intended as a future upgrade path to add protocols that + are currently not supported). This list only affects inbound frames + and is indexed on a per port basis." + ::= { ctTransOtherCfg 1 } + + ctTransOtherEntry OBJECT-TYPE + SYNTAX CtTransOtherEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of objects pertaining to the processing of subgroups + of LLC frames by SAP or SNAP type." + INDEX { ctTransOtherPort } + ::= { ctTransOtherTable 1 } + + CtTransOtherEntry ::= + SEQUENCE { + ctTransOtherPort + INTEGER, + ctTransOtherUnknownSap + INTEGER, + ctTransOtherUnknownSnap + INTEGER, + ctTransOtherSapDsap1Mode + INTEGER, + ctTransOtherSapDsap1Val + INTEGER, + ctTransOtherSapDsap2Mode + INTEGER, + ctTransOtherSapDsap2Val + INTEGER, + ctTransOtherSapDsap3Mode + INTEGER, + ctTransOtherSapDsap3Val + INTEGER, + ctTransOtherSnap1Mode + INTEGER, + ctTransOtherSnap1Val + INTEGER, + ctTransOtherSnap2Mode + INTEGER, + ctTransOtherSnap2Val + INTEGER + } + + ctTransOtherPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MIB-II interface number of the port for which this entry is + administering control for subgroups of LLC frames by SAP or + SNAP type." + ::= { ctTransOtherEntry 1} + + ctTransOtherUnknownSap OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates whether any frames with an unrecognized SAP + will require special translation handling by the processor. A + recognized SAP will be specified by the user in one of the + previous configuration groups. + + The default of this object is product specific." + ::= { ctTransOtherEntry 2} + + ctTransOtherUnknownSnap OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object indicates whether frames with an unrecognized SNAP + will require special translation handling by the processor. A + recognized SNAP will be specified by the user in one of the + previous configuration groups. + + The default of this object is product specific." + ::= { ctTransOtherEntry 3} + + ctTransOtherSapDsap1Mode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object enables(1) or disables (2) the special translation + handling of a SAP frame with a DSAP equal to + ctTransOtherSapDsap1Val. + + The default of this object is product specific." + ::= { ctTransOtherEntry 4} + + ctTransOtherSapDsap1Val OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object allows the user to specify a DSAP value that + when matched will require additional translation on frames." + ::= { ctTransOtherEntry 5} + + ctTransOtherSapDsap2Mode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object enables(1) or disables (2) the special translation + handling of a SAP frame with a DSAP equal to + ctTransOtherSapDsap2Val. + + The default of this object is product specific." + ::= { ctTransOtherEntry 6} + + ctTransOtherSapDsap2Val OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object allows the user to specify a DSAP value that + when matched will require additional translation on frames." + ::= { ctTransOtherEntry 7} + + ctTransOtherSapDsap3Mode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object enables(1) or disables (2) the special translation + handling of a SAP frame with a DSAP equal to + ctTransOtherSapDsap3Val. + + The default of this object is product specific." + ::= { ctTransOtherEntry 8} + + ctTransOtherSapDsap3Val OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object allows the user to specify a DSAP value that + when matched will require additional translation on frames." + ::= { ctTransOtherEntry 9} + + ctTransOtherSnap1Mode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When enabled (1) this object the value in ctTransOtherSnap1Val + will be compared against the protocol values of all SNAP frames + received on this interface. A match indicates that the current + frame requires special translation handling. + + The default of this object is product specific." + ::= { ctTransOtherEntry 10} + + ctTransOtherSnap1Val OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object allows the user to specify a SNAP value to match + against inbound SNAP frames for translation handling." + ::= { ctTransOtherEntry 11} + + ctTransOtherSnap2Mode OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When enabled (1) this object the value in ctTransOtherSnap2Val + will be compared against the protocol values of all SNAP frames + received on this interface. A match indicates that the current + frame requires special translation handling. + + The default of this object is product specific." + ::= { ctTransOtherEntry 12} + + ctTransOtherSnap2Val OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object allows the user to specify a SNAP value to match + against inbound SNAP frames for translation handling." + ::= { ctTransOtherEntry 13} + + ctTransLfpsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtTransLfpsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table is for the user to configure the large frame ports + ability to support large frames. The Large frame port support + is done on a per port basis. The operation affects outbound + frames only." + ::= { ctTranslfpsCfg 1 } + + ctTransLfpsEntry OBJECT-TYPE + SYNTAX CtTransLfpsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + " A list of objects that pertain to the large frame port + support table." + INDEX { ctTransLfpsPort } + ::= { ctTransLfpsTable 1 } + + CtTransLfpsEntry ::= + SEQUENCE { + ctTransLfpsPort + INTEGER, + ctTransLfpsAdminStatus + INTEGER, + ctTransLfpsOperationalStatus + INTEGER + } + + ctTransLfpsPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MIB-II interface number of the port for which this entry is + administering control for subgroups of LLC frames by SAP or + SNAP type." + ::= { ctTransLfpsEntry 1} + + + ctTransLfpsAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + large(1), + fragment-if-possible(2), + small(3), + auto(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When large(1) is the setting all large frames are permissable + out that port. fragment_if_possible(2) is used when the outport + wants ip frames fragmented before transmission. All other non + fragmentable large frames will be transmitted large. small(3) + requires that no large frames be transmitted out this interface. + If a frame can be fragmented then it can be transmitted out the + interface. auto(4) is a special setting that will allow a device + to negotiate which of the other three settings to use as the + operational mode. + + The default of this object is product specific." + ::= { ctTransLfpsEntry 2} + + ctTransLfpsOperationalStatus OBJECT-TYPE + SYNTAX INTEGER { + large(1), + fragment-if-possible(2), + small(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This value represents the current operational mode of the + interface. The operational mode should reflect what is set in + the ctTransLfpsAdminStatus object. The only exception is when + the user sellects a platform mode that is unsupported and if + the ctTransLfpsAdminStatus object is set to auto. If the + ctTransLfpsAdminStatus object is set to auto then the negotiated + value will be reflected, which should be one of the above valid + possibilities. + + The default of this object is product specific." + ::= { ctTransLfpsEntry 3 } + +END |