diff options
Diffstat (limited to 'MIBS/enterasys/CTRON-ETWMIM-MIB')
| -rw-r--r-- | MIBS/enterasys/CTRON-ETWMIM-MIB | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/MIBS/enterasys/CTRON-ETWMIM-MIB b/MIBS/enterasys/CTRON-ETWMIM-MIB new file mode 100644 index 0000000..ff14d0b --- /dev/null +++ b/MIBS/enterasys/CTRON-ETWMIM-MIB @@ -0,0 +1,171 @@ +CTRON-ETWMIM-MIB DEFINITIONS ::= BEGIN + + -- ETWMIM-MIB + -- Revision: 0.02.00 + -- Part Number: 2170991 + -- Date: August 14, 1995 + + -- Cabletron Systems, Inc. + -- 35 Industrial Way, P.O. Box 5005 + -- Rochester, NH 03867-0505 + -- (603) 332-9400 + -- support@ctron.com + + -- This module provides authoritative definitions for part + -- of the naming tree below: + -- + -- cabletron { enterprises 52 } + -- + -- This module will be extended, as additional sub-sections + -- of this naming tree are defined. + -- + + -- Cabletron Systems reserves the right to make changes in + -- specification and other information contained in this document + -- without prior notice. The reader should consult Cabletron Systems + -- to determine whether any such changes have been made. + -- + -- In no event shall Cabletron Systems be liable for any incidental, + -- indirect, special, or consequential damages whatsoever (including + -- but not limited to lost profits) arising out of or related to this + -- document or the information contained in it, even if Cabletron + -- Systems has been advised of, known, or should have known, the + -- possibility of such damages. + -- + -- Cabletron grants vendors, end-users, and other interested parties + -- a non-exclusive license to use this Specification in connection + -- with the management of Cabletron products. + + -- Copyright August 95 Cabletron Systems + + + -- + -- + IMPORTS + OBJECT-TYPE FROM RFC-1212 + ctPModuleETWMIM FROM CTRON-MIB-NAMES; + + + etwDbExist OBJECT-TYPE + SYNTAX INTEGER { + exists(1), + no-exists(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Denotes whether a T1 daughter board is attached to the + Etwmim card being managed" + ::= { ctPModuleETWMIM 1 } + + etwDbEnabled OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object exists if etwDbExist is 1. Setting + this object to 1 will cause the WAN port to use the + daughterboard T1 port. Setting this object to 2 + will cause the WAN port to use the synchronous port" + ::= { ctPModuleETWMIM 2 } + + etwDbFracToggle OBJECT-TYPE + SYNTAX INTEGER { + update-table(1), + display-new(2), + display-old(3), + restore-old(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object exists if etwDbExist is 1. Setting this + object to 1 will cause the T1 fractional table to be + updated with the new values, as entered. Setting this + object to 2, will cause the T1 fractional table to be + the table as it is being entered. Setting this object + to 3, will cause the T1 fractional table to be the + table that is currently in use, regardless of any + changes being entered. Setting this object to 4, will + cause any changes that have been made to the fractional + table since the last update-table to be deleted." + REFERENCE + "IETF RFC 1232" + ::= { ctPModuleETWMIM 3 } + + etwFWRev OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(8)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Denotes the revision of firmware in the module. + The format of the string is xx.xx.xx, where the first + pair indicates version, and the second pair indicates + revision." + ::= { ctPModuleETWMIM 4 } + + etwHWRev OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Denotes the revision of hardware." + ::= { ctPModuleETWMIM 5 } + + etwEpimEnabled OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object gives the status of the EPIM port on the + etwmim. A value of 1 indicates that the hardware has + been set to use the Epim port for the ethernet + connection. A value of 2 indicates that the hardware + has been set to use the A channel for the ethernet + connection" + ::= { ctPModuleETWMIM 6 } + + etwEpimType OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Identifies the type of EPIM that is present in the + EPIM slot. The value is allocated in the Ctron naming + tree." + ::= { ctPModuleETWMIM 7 } + + etwEpimLink OBJECT-TYPE + SYNTAX INTEGER { + link-established(1), + link-not-established(2), + link-unknown(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object will indicate whether a link is + established on the EPIM link. A value of 1 indicates + that a link is established. A value of 2 indicates that + a link is not established. A value of 3 indicates that + the status of the link is unknown or not valid for the + type of Epim installed." + ::= { ctPModuleETWMIM 8 } + + etwClearNvramOnBoot OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "When set to a 1, the system will clear all persistant + objects, except for the download objects, from nvram + on the next system boot" + ::= { ctPModuleETWMIM 9 } + +END |